Age | Commit message (Collapse) | Author | Files | Lines |
|
PR python/23108 points out that the gdb.GdbError documentation is
somewhat difficult to find. The exception is apparently just
mentioned in passing. This patch introduces a new table and adds a
bit more text to try to make it more obvious.
gdb/doc/ChangeLog
2018-09-10 Tom Tromey <tom@tromey.com>
PR python/23108:
* python.texi (Exception Handling): Rearrange gdb.GdbError text
and add a table.
|
|
"make info" gives a number of warnings about the use of a "." in
@ref-like commands. These come from the ".info" suffix. I think this
suffix is redundant, and removing the suffix also removes the warning.
gdb/doc/ChangeLog
2018-09-10 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Compilation): Use "gcc", not "gcc.info", in @xref.
(Machine Code): Use "binutils", not "binutils.info", in @pxref.
(Separate Debug Files): Use "ld", not "ld.info", in @ref.
* python.texi (Objfiles In Python): Use "ld", not "ld.info", in @ref.
|
|
PR python/16484 points out that Frame.block can throw an exception,
but this is not documented.
This patch fixes the documentation. Changing Frame.block to return
None would be nice, but I suspect it's too late for that change.
gdb/doc/ChangeLog
2018-09-10 Tom Tromey <tom@tromey.com>
PR python/16484:
* python.texi (Frames In Python): Document that Frame.block can
throw.
|
|
PR python/23487 points out that the "disable pretty-printer" example
has a typo that makes it incorrect. This patch fixes the typo.
gdb/doc/ChangeLog
2018-09-10 Tom Tromey <tom@tromey.com>
PR python/23487:
* gdb.texinfo (Pretty-Printer Commands): Fix typo in example.
|
|
PR python/16033 points out that Block.end doesn't describe whether it
is inclusive or exclusive. This patch fixes the documentation.
gdb/doc/ChangeLog
2018-09-10 Tom Tromey <tom@tromey.com>
PR python/16033:
* python.texi (Blocks In Python): Document that Block.end is
exclusive.
|
|
Add int24 and uint24. These are used by the upcoming S12Z target, but will be
needed for any arch which features 24 bit registers.
* gdb/gdbtypes.h (struct builtin_type): New members builtin_int24
and builtin_uint24;
* gdb/gdbtypes.c: Initialize them.
* gdb/doc/gdb.texinfo (Predefined Target Types): Mention types int24 and uint24.
|
|
This patch adds *basic* support for C++ to the compile feature. It does
most simple type conversions, including everything that C compile does and
your basic "with-classes" type of C++.
I've written a new compile-support.exp support file which adds a new test
facility for automating and simplifying "compile print" vs "compile code"
testing. See testsuite/lib/compile-support.exp and CompileExpression
for more on that. The tests use this facility extensively.
This initial support has several glaring omissions:
- No template support at all
I have follow-on patches for this, but they add much complexity
to this "basic" support. Consequently, they will be submitted separately.
- Cannot print functions
The code template needs tweaking, and I simply haven't gotten to it yet.
- So-called "special function" support is not included
Using constructors, destructors, operators, etc will not work. I have
follow-on patches for that, but they require some work because of the
recent churn in symbol searching.
- There are several test suite references to "compile/1234" bugs.
I will file bugs and update the test suite's bug references before pushing
these patches.
The test suite started as a copy of the original C-language support, but
I have written tests to exercise the basic functionality of the plug-in.
I've added a new option for outputting debug messages for C++ type-conversion
("debug compile-cplus-types").
gdb/ChangeLog:
* Makefile.in (SUBDIR_GCC_COMPILE_SRCS): Add compile-cplus-symbols.c
and compile-cplus-types.c.
(HFILES_NO_SRCDIR): Add gcc-cp-plugin.h.
* c-lang.c (cplus_language_defn): Set C++ compile functions.
* c-lang.h (cplus_get_compile_context, cplus_compute_program):
Declare.
* compile/compile-c-support.c: Include compile-cplus.h.
(load_libcompile): Templatize.
(get_compile_context): "New" function.
(c_get_compile_context): Use get_compile_context.
(cplus_get_compile_context): New function.
(cplus_push_user_expression, cplus_pop_user_expression)
(cplus_add_code_header, cplus_add_input, cplus_compile_program)
(cplus_compute_program): Define new structs/functions.
* compile/compile-cplus-symmbols.c: New file.
* compile/compile-cplus-types.c: New file.
* compile/compile-cplus.h: New file.
* compile/compile-internal.h (debug_compile_oracle, GCC_TYPE_NONE):
Declare.
* compile/compile-object-load.c (get_out_value_type): Use
strncmp_iw when comparing symbol names.
(compile_object_load): Add mst_bss and mst_data.
* compile/compile.c (_initialize_compile): Remove
-Wno-implicit-function-declaration from `compile_args'.
* compile/gcc-cp-plugin.h: New file.
* NEWS: Mention C++ compile support and new debug options.
gdb/testsuite/ChangeLog:
* gdb.compile/compile-cplus-anonymous.cc: New file.
* gdb.compile/compile-cplus-anonymous.exp: New file.
* gdb.compile/compile-cplus-array-decay.cc: New file.
* gdb.compile/compile-cplus-array-decay.exp: New file.
* gdb.compile/compile-cplus-inherit.cc: New file.
* gdb.compile/compile-cplus-inherit.exp: New file.
* gdb.compile/compile-cplus-member.cc: New file.
* gdb.compile/compile-cplus-member.exp: New file.
* gdb.compile/compile-cplus-method.cc: New file.
* gdb.compile/compile-cplus-method.exp: New file.
* gdb.compile/compile-cplus-mod.c: "New" file.
* gdb.compile/compile-cplus-namespace.cc: New file.
* gdb.compile/compile-cplus-namespace.exp: New file.
* gdb.compile/compile-cplus-nested.cc: New file.
* gdb.compile/compile-cplus-nested.exp: New file.
* gdb.compile/compile-cplus-print.c: "New" file.
* gdb.compile/compile-cplus-print.exp: "New" file.
* gdb.compile/compile-cplus-virtual.cc: New file.
* gdb.compile/compile-cplus-virtual.exp: New file.
* gdb.compile/compile-cplus.c: "New" file.
* gdb.compile/compile-cplus.exp: "New" file.
* lib/compile-support.exp: New file.
doc/ChangeLog:
* gdb.texinfo (Compiling and injecting code in GDB): Document
set/show "compile-oracle" and "compile-cplus-types" commands.
|
|
When printing frames on an MI channel also print the frame
architecture like in:
(gdb)
-stack-list-frames 3 3
^done,stack=
[frame={level="3",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",
line="14",arch="i386:x86_64"}]
(gdb)
This is useful for MI clients that need to know the architecture in
order to perform further analysis, for example to use their own
disassembler to analyze machine code.
gdb/Changelog:
2018-08-22 Jan Vrany <jan.vrany@fit.cvut.cz>
* stack.c (print_frame): Print frame architecture when printing on
an MI output.
* NEWS: Mention new "arch" attribute in frame output.
gdb/testsuite/Changelog
2018-08-22 Jan Vrany <jan.vrany@fit.cvut.cz>
* lib/mi-support.exp (mi_expect_stop): Update regexp to
accommodate new "arch" field in frame output.
* gdb.mi/mi-return.exp: Likewise.
* gdb.mi/mi-stack.exp: Likewise.
* gdb.mi/mi-syn-frame.exp: Likewise.
* gdb.mi/user-selected-context-sync.exp: Likewise.
gdb/doc/Changelog
2018-08-22 Jan Vrany <jan.vrany@fit.cvut.cz>
* gdb.texinfo (The -stack-list-frames Command): Update description
to mention "arch".
Update MI examples throughout the document to contain "arch" in
frame output.
|
|
gdb/
* NEWS: Add SVE to 8.2 section.
gdb/doc/
* doc/gdb.texinfo (AArch64 SVE): New subsubsection.
|
|
The CLI "disassemble" command allows specifying a single address - in
that case the function surrounding that address is disassembled.
This commit adds this feature to the equivalent MI command
"-data-disassemble".
gdb/ChangeLog:
2018-08-14 Jan Vrany <jan.vrany@fit.cvut.cz>
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Add -a option.
If used, use find_pc_partial_function to find address range
to disassemble.
* mi/mi-main.c (mi_cmd_list_features): Report
"data-disassemble-a-option" feature.
* NEWS: Mention new -data-disassemble option -a.
gdb/doc/ChangeLog:
2018-08-14 Jan Vrany <jan.vrany@fit.cvut.cz>
* gdb.texinfo (GDB/MI Data Manipulation): Document
"-data-disassemble -a addr".
(GDB/MI Support Commands): Document "data-disassemble-a-option"
feature.
gdb/testsuite/ChangeLog:
2018-08-14 Jan Vrany <jan.vrany@fit.cvut.cz>
* gdb.mi/mi-disassemble.exp (test_disassembly_only): Add tests for
-data-disassemble -a.
(test_disassembly_bogus_args): Likewise.
|
|
New in v3:
- Address Eli's comments.
This patch adds doc and news for the feature introduced by the previous
patch.
gdb/ChangeLog:
* NEWS: Mention the index cache.
gdb/doc/ChangeLog:
* gdb.texinfo (Index Files Speed Up GDB): Add section about
symbol index cache.
|
|
Ref.: https://bugs.debian.org/904628
It has been reported that gcore's manpage is a bit imprecise when it
comes to two things:
- It doesn't explicity say that the command accepts more than one PID
on its CLI.
- It fails to mention that the argument passed through the "-o" option
is actually a prefix that will be used to compose the corefile's
filename, and not the actual filename.
I decided to give it a try and rewrite parts of the text to further
clarify these two points. I ended up rewording the "Description"
section because, IMHO, it was a bit confuse to understand.
To make things consistent, I've also renamed the "$name" variable in
the gcore.in script, and expanded the usage text.
gdb/doc/ChangeLog:
2018-07-27 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (gcore man): Rewrite "Description" and "-o"
option sections to further clarify that gcore can take more
than one PID, and that "-o" is used to specify a prefix, not a
filename.
gdb/ChangeLog:
2018-07-27 Sergio Durigan Junior <sergiodj@redhat.com>
* gcore.in: Rename variable "name" to "prefix". Expand
"usage" text.
|
|
Add a maintenance command to disable the DWARF stack unwinders.
Normal users would not need this feature, but it is useful to allow
extended testing of fallback stack unwinding strategies, for example,
prologue scanners.
This is a partial implementation of the idea discussed in pr gdb/8434,
which talks about a generic ability to disable any frame unwinder.
Being able to arbitrarily disable any frame unwinder would be a more
complex patch, and I was unsure how useful such a feature would really
be, however, I can see (and have) a real need to disable DWARF
unwinders. That's why this patch only targets that specific set of
unwinders.
If in the future we find ourselves adding more switches to disable
different unwinders, then we should probably move to a more generic
solution, and remove this patch.
gdb/ChangeLog:
* dwarf2-frame-tailcall.c (tailcall_frame_sniffer): Exit early if
DWARF unwinders are disabled.
* dwarf2-frame.c: Add dwarf2read.h include.
(dwarf2_frame_sniffer): Exit early if DWARF unwinders are
disabled.
(dwarf2_frame_unwinders_enabled_p): Define.
(show_dwarf_unwinders_enabled_p): New function.
(_initialize_dwarf2_frame): Register switch to control DWARF
unwinder use.
* dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Declare.
* dwarf2read.c (set_dwarf_cmdlist): Remove static keyword.
(show_dwarf_cmdlist): Remove static keyword.
* dwarf2read.h (set_dwarf_cmdlist): Declare.
(show_dwarf_cmdlist): Declare.
* NEWS: Document new feature.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Add description of
maintenance command to control dwarf unwinders.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Add check that dwarf unwinders control flag
is visible.
|
|
Documents the new commands 'frame apply', faas, taas, tfaas.
Documents the new arguments [FLAG]... added to 'thread apply'.
gdb/doc/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Debugging Programs with Multiple Threads):
Document changes to 'thread apply'. Document 'taas'.
Document 'tfaas'.
(Examining the Stack): Document 'frame apply'. Document 'faas'.
|
|
This patch implements IPv6 support for both GDB and gdbserver. Based
on my research, it is the fourth attempt to do that since 2006. Since
I used ideas from all of the previous patches, I also added their
authors's names on the ChangeLogs as a way to recognize their
efforts. For reference sake, you can find the previous attempts at:
https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html
https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html
https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html
The basic idea behind the patch is to start using the new
'getaddrinfo'/'getnameinfo' calls, which are responsible for
translating names and addresses in a protocol-independent way. This
means that if we ever have a new version of the IP protocol, we won't
need to change the code again (or, at least, won't have to change the
majority of the code).
The function 'getaddrinfo' returns a linked list of possible addresses
to connect to. Dealing with multiple addresses proved to be a hard
task with the current TCP auto-retry mechanism implemented on
ser-tcp:net_open. For example, when gdbserver listened only on an
IPv4 socket:
$ ./gdbserver --once 127.0.0.1:1234 ./a.out
and GDB was instructed to try to connect to both IPv6 and IPv4
sockets:
$ ./gdb -ex 'target extended-remote localhost:1234' ./a.out
the user would notice a somewhat big delay before GDB was able to
connect to the IPv4 socket. This happened because GDB was trying to
connect to the IPv6 socket first, and had to wait until the connection
timed out before it tried to connect to the IPv4 socket.
For that reason, I had to rewrite the main loop and implement a new
method for handling multiple connections. After some discussion,
Pedro and I agreed on the following algorithm:
1) For each entry returned by 'getaddrinfo', we try to open a socket
and connect to it.
2.a) If we have a successful 'connect', we just use that connection.
2.b) If we don't have a successfull 'connect', but if we've got a
ECONNREFUSED (meaning the the connection was refused), we keep track
of this fact by using a flag.
2.c) If we don't have a successfull 'connect', but if we've got a
EINPROGRESS (meaning that the connection is in progress), we perform
a 'select' call on the socket until we have a result (either a
successful connection, or an error on the socket).
3) If tcp_auto_retry is true, and we haven't gotten a successful
connection, and at least one of our attempts failed with
ECONNREFUSED, then we wait a little bit (i.e., call
'wait_for_connect'), check to see if there was a
timeout/interruption (in which case we bail out), and then go back
to (1).
After multiple tests, I was able to connect without delay on the
scenario described above, and was also able to connect in all other
types of scenarios.
I also implemented some hostname parsing functions (along with their
corresponding unit tests) which are used to help GDB and gdbserver to
parse hostname strings provided by the user. These new functions are
living inside common/netstuff.[ch]. I've had to do that since IPv6
introduces a new URL scheme, which defines that square brackets can be
used to enclose the host part and differentiate it from the
port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some
time thinking about a reasonable way to interpret what the user wants,
and I came up with the following:
- If the user has provided a prefix that doesn't specify the protocol
version (i.e., "tcp:" or "udp:"), or if the user has not provided
any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when
dealing with 'getaddrinfo') *unless* the host starts with "[" (in
which case, assume it's an IPv6 host).
- If the user has provided a prefix that does specify the protocol
version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect
that.
This method doesn't follow strictly what RFC 2732 proposes (that
literal IPv6 addresses should be provided enclosed in "[" and "]")
because IPv6 addresses still can be provided without square brackets
in our case, but since we have prefixes to specify protocol versions I
think this is not an issue.
Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST'
testcase parameter, which makes it possible to specify the
hostname (without the port) to be used when testing GDB and
gdbserver. For example, to run IPv6 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]'
Or, to run IPv4 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1'
This required a few changes on the gdbserver-base.exp, and also a
minimal adjustment on gdb.server/run-without-local-binary.exp.
Finally, I've implemented a new testcase,
gdb.server/server-connect.exp, which is supposed to run on the native
host and perform various "smoke tests" using different connection
methods.
This patch has been regression-tested on BuildBot and locally, and
also built using a x86_64-w64-mingw32 GCC, and no problems were found.
gdb/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
'unittests/parse-connection-spec-selftests.c'.
(COMMON_SFILES): Add 'common/netstuff.c'.
(HFILES_NO_SRCDIR): Add 'common/netstuff.h'.
* NEWS (Changes since GDB 8.2): Mention IPv6 support.
* common/netstuff.c: New file.
* common/netstuff.h: New file.
* ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'.
(wait_for_connect): Update comment. New parameter
'gdb::optional<int> sock' instead of 'struct serial *scb'.
Use 'sock' directly instead of 'scb->fd'.
(try_connect): New function, with code from 'net_open'.
(net_open): Rewrite main loop to deal with multiple
sockets/addresses. Handle IPv6-style hostnames; implement
support for IPv6 connections.
* unittests/parse-connection-spec-selftests.c: New file.
gdb/gdbserver/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'.
(OBS): Add 'common/netstuff.o'.
(GDBREPLAY_OBS): Likewise.
* gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'.
(remote_open): Implement support for IPv6
connections.
* remote-utils.c: Include 'netstuff.h', 'filestuff.h'
and 'wspiapi.h'.
(handle_accept_event): Accept connections from IPv6 sources.
(remote_prepare): Handle IPv6-style hostnames; implement
support for IPv6 connections.
(remote_open): Implement support for printing connections from
IPv6 sources.
gdb/testsuite/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST'
parameter.
* boards/native-extended-gdbserver.exp: Do not set 'sockethost'
by default.
* boards/native-gdbserver.exp: Likewise.
* gdb.server/run-without-local-binary.exp: Improve regexp used
for detecting when a remote debugging connection succeeds.
* gdb.server/server-connect.exp: New file.
* lib/gdbserver-support.exp (gdbserver_default_get_comm_port):
Do not prefix the port number with ":".
(gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement
support for detecting and using it. Add '$debughost_gdbserver'
to the list of arguments used to start gdbserver. Handle case
when gdbserver cannot resolve a network name.
gdb/doc/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* gdb.texinfo (Remote Connection Commands): Add explanation
about new IPv6 support. Add new connection prefixes.
|
|
Switch to use add_setshow_zuinteger_unlimited_cmd for some of the
control variables in remote.c. The variables
hardware-watchpoint-limit, hardware-breakpoint-limit, and
hardware-watchpoint-length-limit are all changed. For example, a user
will now see this:
(gdb) show remote hardware-breakpoint-limit
The maximum number of target hardware breakpoints is unlimited.
Instead of this:
(gdb) show remote hardware-breakpoint-limit
The maximum number of target hardware breakpoints is -1.
And can do this:
(gdb) set remote hardware-breakpoint-limit unlimited
However, previously any negative value implied "unlimited", now only
-1, or the text "unlimited" can be used for unlimited. Any other
negative value will give an error about invalid input. This is a
small change in the user interface, but, hopefully, this will not
cause too many problems.
I've also added show functions for these three variables to allow for
internationalisation.
gdb/ChangeLog:
* remote.c (show_hardware_watchpoint_limit): New function.
(show_hardware_watchpoint_length_limit): New function.
(show_hardware_breakpoint_limit): New function.
(_initialize_remote): Use add_setshow_zuinteger_unlimited_cmd
where appropriate, update help text.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote Configuration): Update descriptions for
set/show of hardware-watchpoint-limit, hardware-breakpoint-limit,
and hardware-watchpoint-length-limit variables.
|
|
Implement MIPS target support for passing options to the disassembler,
complementing commit 65b48a81404c ("GDB: Add support for the new
set/show disassembler-options commands.").
This includes options that expect an argument, so adjust the generic
code and data structures used so as to handle such options. So as to
give backends syntax flexibility no specific delimiter has been defined
to separate options from their respective arguments, so it has to be
included as the last character of the option name. Completion code
however has not been adjusted and consequently option arguments cannot
be completed at this time.
Also the MIPS target has non-empty defaults for the options, so that ABI
names for the general-purpose registers respect our `set mips abi ...'
setting rather than always being determined from the ELF headers of the
binary file selected. Handle these defaults as implicit options, never
shown to the user and always prepended to the user-specified options, so
that the latters can override the defaults.
The resulting output for the MIPS target is as follows:
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
no-aliases Use canonical instruction forms.
msa Recognize MSA instructions.
virt Recognize the virtualization ASE instructions.
xpa Recognize the eXtended Physical Address (XPA) ASE
instructions.
ginv Recognize the Global INValidate (GINV) ASE instructions.
gpr-names=ABI Print GPR names according to specified ABI.
Default: based on binary being disassembled.
fpr-names=ABI Print FPR names according to specified ABI.
Default: numeric.
cp0-names=ARCH Print CP0 register names according to specified architecture.
Default: based on binary being disassembled.
hwr-names=ARCH Print HWR names according to specified architecture.
Default: based on binary being disassembled.
reg-names=ABI Print GPR and FPR names according to specified ABI.
reg-names=ARCH Print CP0 register and HWR names according to specified
architecture.
For the options above, the following values are supported for "ABI":
numeric 32 n32 64
For the options above, the following values are supported for "ARCH":
numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600
r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000
r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64
mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e
loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp
(gdb)
which corresponds to what `objdump --help' used to print for the MIPS
target, with minor formatting changes, most notably option argument
lists being wrapped, but also the amount of white space separating
options from the respective descriptions. The relevant part the new
code is now also used by `objdump --help', which means these formatting
changes apply to both outputs, except for argument list wrapping, which
is GDB-specific.
This also adds a separating new line between the heading and option
lists where descriptions are provided, hence:
(gdb) set architecture s390:31-bit
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
esa Disassemble in ESA architecture mode
zarch Disassemble in z/Architecture mode
insnlength Print unknown instructions according to length from first two bits
(gdb)
but:
(gdb) set architecture powerpc:common
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl,
821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300,
e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5,
power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge,
ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe,
spe2, titan, vle, vsx
(gdb)
Existing affected target backends have been adjusted accordingly.
This has been verified manually with:
(gdb) set architecture arm
(gdb) set architecture powerpc:common
(gdb) set architecture s390:31-bit
to cause no issues with the `show disassembler-options' and `set
disassembler-options' commands. A test case for the MIPS target has
also been provided, covering the default settings with ABI overrides as
well as disassembler option overrides.
2018-07-02 Maciej W. Rozycki <macro@mips.com>
Simon Marchi <simon.marchi@polymtl.ca>
include/
PR tdep/8282
* dis-asm.h (disasm_option_arg_t): New typedef.
(disasm_options_and_args_t): Likewise.
(disasm_options_t): Add `arg' member, document members.
(disassembler_options_mips): New prototype.
(disassembler_options_arm, disassembler_options_powerpc)
(disassembler_options_s390): Update prototypes.
opcodes/
PR tdep/8282
* mips-dis.c (mips_option_arg_t): New enumeration.
(mips_options): New variable.
(disassembler_options_mips): New function.
(print_mips_disassembler_options): Reimplement in terms of
`disassembler_options_mips'.
* arm-dis.c (disassembler_options_arm): Adapt to using the
`disasm_options_and_args_t' structure.
* ppc-dis.c (disassembler_options_powerpc): Likewise.
* s390-dis.c (disassembler_options_s390): Likewise.
gdb/
PR tdep/8282
* disasm.h (gdb_disassembler): Add
`m_disassembler_options_holder'. member
* disasm.c (get_all_disassembler_options): New function.
(gdb_disassembler::gdb_disassembler): Use it.
(gdb_buffered_insn_length_init_dis): Likewise.
(gdb_buffered_insn_length): Adjust accordingly.
(set_disassembler_options): Handle options with arguments.
(show_disassembler_options_sfunc): Likewise. Add a leading new
line if showing options with descriptions.
(disassembler_options_completer): Adapt to using the
`disasm_options_and_args_t' structure.
* mips-tdep.c (mips_disassembler_options): New variable.
(mips_disassembler_options_o32): Likewise.
(mips_disassembler_options_n32): Likewise.
(mips_disassembler_options_n64): Likewise.
(gdb_print_insn_mips): Don't set `disassembler_options'.
(gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove
functions.
(mips_gdbarch_init): Always set `gdbarch_print_insn' to
`gdb_print_insn_mips'. Set `gdbarch_disassembler_options',
`gdbarch_disassembler_options_implicit' and
`gdbarch_valid_disassembler_options'.
* arm-tdep.c (_initialize_arm_tdep): Adapt to using the
`disasm_options_and_args_t' structure.
* gdbarch.sh (disassembler_options_implicit): New `gdbarch'
method.
(valid_disassembler_options): Switch from `disasm_options_t' to
the `disasm_options_and_args_t' structure.
* NEWS: Document `set disassembler-options' support for the MIPS
target.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
gdb/doc/
PR tdep/8282
* gdb.texinfo (Source and Machine Code): Document `set
disassembler-options' support for the MIPS target.
gdb/testsuite/
PR tdep/8282
* gdb.arch/mips-disassembler-options.exp: New test.
* gdb.arch/mips-disassembler-options.s: New test source.
|
|
If all sections of a symbol file are loaded with a fixed offset, it
is easier to specify that offset than listing all sections
explicitly. There is also a similar option for "symbol-file".
gdb/ChangeLog:
2018-06-28 Petr Tesarik <ptesarik@suse.cz>
* symfile.c (add_symbol_file_command, _initialize_symfile): Add
option "-o" to add-symbol-file-load to add an offset to each
section's load address.
* symfile.c (set_objfile_default_section_offset): New function.
gdb/doc/ChangeLog:
2018-06-28 Petr Tesarik <ptesarik@suse.cz>
* gdb.texinfo (Files): Document "add-symbol-file -o offset".
gdb/testsuite/ChangeLog:
2018-06-28 Petr Tesarik <ptesarik@suse.cz>
* gdb.base/relocate.exp: Add test for "add-symbol-file -o ".
|
|
The (first) .text section must be always specified as the second
non-option argument. The documentation states that GDB cannot
figure out this address by itself. This is true if the object file
was indeed relocated, but it is also confusing, because all other
sections can be omitted and will use the address provided by BFD.
gdb/ChangeLog:
2018-06-28 Petr Tesarik <ptesarik@suse.cz>
* symfile.c (add_symbol_file_command, _initialize_symfile): Do not
require the second argument. If omitted, load sections at the
addresses specified in the file.
gdb/doc/ChangeLog:
2018-06-28 Petr Tesarik <ptesarik@suse.cz>
* gdb.texinfo (Files): The address argument for "add-symbol-file"
is no longer mandatory.
gdb/testsuite/ChangeLog:
2018-06-28 Petr Tesarik <ptesarik@suse.cz>
* gdb.base/relocate.exp: Test add-symbol-file behavior when the
address argument is omitted.
|
|
If the main file is relocated at runtime, all symbols are offset by
a fixed amount. Let the user specify this offset when loading a
symbol file.
gdb/ChangeLog:
2018-06-28 Petr Tesarik <ptesarik@suse.cz>
* symfile.c (symbol_file_command, symbol_file_add_main_1)
(_initialize_symfile): Add option "-o" to symbol-file to add an
offset to each section of the symbol file.
gdb/doc/ChangeLog:
2018-06-28 Petr Tesarik <ptesarik@suse.cz>
* gdb.texinfo (Files): Document "symbol-file -o offset".
gdb/testsuite/ChangeLog:
2018-06-28 Petr Tesarik <ptesarik@suse.cz>
* gdb.base/relocate.exp: Add test for "symbol-file -o ".
|
|
|
|
GDB's execution commands have a foreground and background variant: f.i.,
there's 'continue' and 'continue&', and both are listed individually in the
'Command, Variable, and Function Index'. But the '&' is not listed in the
'Concept Index' as being connected with the concept background execution.
This patch adds an '&' in the 'Concept Index':
...
* $_, $__, and value history: Memory. (line 119)
+* &, background execution of commands: Background Execution.
+ (line 16)
* --annotate: Mode Options. (line 121)
...
pointing to this line in 'Background Execution':
...
To specify background execution, add a '&' to the command.
...
Build on x86_64.
2018-06-14 Tom de Vries <tdevries@suse.de>
* gdb.texinfo (Background Execution): Add @cindex for '&'.
|
|
gdb/doc/ChangeLog
2018-06-11 Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (Maintenance Commands): Add a missing @anchor.
|
|
This commit adds two new commands which may be used to test thread
debugging libraries used by GDB:
* "maint check libthread-db" tests the thread debugging library GDB
is using for the current inferior.
* "maint set/show check-libthread-db" selects whether libthread_db
tests should be run automatically as libthread_db is auto-loaded.
The default is to not run tests automatically.
The test itself is a basic integrity check exercising all libthread_db
functions used by GDB on GNU/Linux systems. By extension this also
exercises the proc_service functions provided by GDB that libthread_db
uses.
This functionality is useful for NPTL developers and libthread_db
developers. It could also prove useful investigating bugs reported
against GDB where the thread debugging library or GDB's proc_service
layer is suspect.
gdb/ChangeLog:
* linux-thread-db.c (valprint.h): New include.
(struct check_thread_db_info): New structure.
(check_thread_db_on_load, tdb_testinfo): New static globals.
(check_thread_db, check_thread_db_callback): New functions.
(try_thread_db_load_1): Run integrity checks if requested.
(maintenance_check_libthread_db): New function.
(_initialize_thread_db): Register "maint check libthread-db"
and "maint set/show check-libthread-db".
* NEWS: Mention the above new commands.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Document "maint check
libthread-db" and "maint set/show check-libthread-db".
gdb/testsuite/ChangeLog:
* gdb.threads/check-libthread-db.exp: New file.
* gdb.threads/check-libthread-db.c: Likewise.
|
|
This adds a "continue" response to the pager. If the user types "c"
in response to the pager prompt, pagination will be disabled for the
duration of one command -- but re-enabled afterward. This is handy if
you type a command that produces a lot of output, and you don't want
to baby-sit it by typing "return" each time the prompt comes up.
Tested by the buildbot.
gdb/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
PR cli/12326:
* NEWS: Add entry about pager.
* utils.c (pagination_disabled_for_command): New global.
(prompt_for_continue): Allow "c" response to prompt.
(reinitialize_more_filter): Clear
pagination_disabled_for_command.
(fputs_maybe_filtered): Check pagination_disabled_for_command.
gdb/doc/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
PR cli/12326:
* gdb.texinfo (Screen Size): Document "c" response to pagination
prompt.
gdb/testsuite/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
PR cli/12326:
* gdb.cp/static-print-quit.exp: Update.
* lib/gdb.exp (pagination_prompt): Update.
* gdb.base/page.exp: Use pagination_prompt. Add new tests.
* gdb.python/python.exp: Update.
|
|
It's long bothered me that setting a Python parameter from the CLI
will print the "set" help text by default. I think usually "set"
commands should be silent. And, while you can modify this behavior a
bit by providing a "get_set_string" method, if this method returns an
empty string, a blank line will be printed.
This patch removes the "help" behavior and changes the get_set_string
behavior to avoid printing a blank line. The code has a comment about
preserving API behavior, but I don't think this is truly important;
and in any case the workaround -- implementing get_set_string -- is
trivial.
Regression tested on x86-64 Fedora 26.
2018-04-26 Tom Tromey <tom@tromey.com>
* NEWS: Mention new "set" behavior.
* python/py-param.c (get_set_value): Don't print an empty string.
Don't call get_doc_string.
gdb/doc/ChangeLog
2018-04-26 Tom Tromey <tom@tromey.com>
* python.texi (Parameters In Python): Update get_set_string
documentation.
|
|
This adds a basic Python API for accessing convenience variables.
With this, convenience variables can be read and set from Python.
Although gdb supports convenience variables whose value changes at
each call, this is not exposed to Python; it could be, but I think
it's just as good to write a convenience function in this situation.
This is PR python/23080.
Tested on x86-64 Fedora 26.
2018-04-22 Tom Tromey <tom@tromey.com>
PR python/23080:
* NEWS: Update for new functions.
* python/py-value.c (gdbpy_set_convenience_variable)
(gdbpy_convenience_variable): New functions.
* python/python-internal.h (gdbpy_convenience_variable)
(gdbpy_set_convenience_variable): Declare.
* python/python.c (python_GdbMethods): Add convenience_variable,
set_convenience_variable.
doc/ChangeLog
2018-04-22 Tom Tromey <tom@tromey.com>
PR python/23080:
* python.texi (Basic Python): Document gdb.convenience_variable,
gdb.set_convenience_variable.
testsuite/ChangeLog
2018-04-22 Tom Tromey <tom@tromey.com>
PR python/23080:
* gdb.python/python.exp: Add convenience variable tests.
|
|
Use the last endianness explicitly selected, either by choosing a binary
file or with the `set endian' command, for future automatic selection.
As observed with the `gdb.base/step-over-no-symbols.exp' test case when
discarding the binary file even while connected to a live target the
endianness automatically selected is reset to the GDB target's default,
even if it does not match the endianness of the target being talked to.
For example with a little-endian MIPS target and the default endianness
being big we get this:
(gdb) file .../gdb/testsuite/outputs/gdb.base/step-over-no-symbols/step-over-no-symbols
Reading symbols from .../gdb/testsuite/outputs/gdb.base/step-over-no-symbols/step-over-no-symbols...done.
(gdb) delete breakpoints
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break main
Breakpoint 1 at 0x400840: file .../gdb/testsuite/gdb.base/start.c, line 34.
[...]
(gdb) continue
Continuing.
Breakpoint 1, main () at .../gdb/testsuite/gdb.base/start.c:34
34 foo();
(gdb) delete breakpoints
Delete all breakpoints? (y or n) y
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) file
A program is being debugged already.
Are you sure you want to change the file? (y or n) y
No executable file now.
Discard symbol table from `.../gdb/testsuite/outputs/gdb.base/step-over-no-symbols/step-over-no-symbols'? (y or n) y
No symbol file now.
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: purging symbols
p /x $pc
$1 = 0x40084000
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: get before PC
break *$pc
Breakpoint 2 at 0x40084000
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: break *$pc
set displaced-stepping off
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: set displaced-stepping off
stepi
Warning:
Cannot insert breakpoint 2.
Cannot access memory at address 0x40084000
Command aborted.
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: stepi
p /x $pc
$2 = 0x40084000
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: get after PC
FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: advanced
Remote debugging from host ...
monitor exit
(gdb) Killing process(es): ...
testcase .../gdb/testsuite/gdb.base/step-over-no-symbols.exp completed in 2 seconds
which shows that with the removal of the executable debugged the
endianness of $pc still at `main' gets swapped and the value in that
register is now incorrectly interpreted as 0x40084000 rather than
0x400840 as shown earlier on with the `break' command. Consequently the
debug session no longer works as expected, until the endianness is
overridden with an explicit `set endian little' command.
This will happen while working with any target hardware whose endianness
does not match the default GDB target's endianness guessed and recorded
for a later use in `initialize_current_architecture'.
Given that within a single run of GDB it is more likely that consecutive
target connections will use the same endianness than that the endianness
will be swapped between connections, it makes sense to preserve the last
endianness explicitly selected as the automatic default. It will make a
session like above, where an executable is removed, work correctly and
will retain the endianness for a further reconnection to the target.
And the new automatic default will still be overridden by subsequently
choosing a binary to debug, or with an explicit `set endian' command.
With the change in place the test case above completes successfully:
(gdb) continue
Continuing.
Breakpoint 1, main () at .../gdb/testsuite/gdb.base/start.c:34
34 foo();
(gdb) delete breakpoints
Delete all breakpoints? (y or n) y
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) file
A program is being debugged already.
Are you sure you want to change the file? (y or n) y
No executable file now.
Discard symbol table from `.../gdb/testsuite/outputs/gdb.base/step-over-no-symbols/step-over-no-symbols'? (y or n) y
No symbol file now.
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: purging symbols
p /x $pc
warning: GDB can't find the start of the function at 0x400840.
GDB is unable to find the start of the function at 0x400840
and thus can't determine the size of that function's stack frame.
This means that GDB may be unable to access that stack frame, or
the frames below it.
This problem is most likely caused by an invalid program counter or
stack pointer.
However, if you think GDB should simply search farther back
from 0x400840 for code which looks like the beginning of a
function, you can increase the range of the search using the `set
heuristic-fence-post' command.
$1 = 0x400840
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: get before PC
break *$pc
Breakpoint 2 at 0x400840
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: break *$pc
set displaced-stepping off
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: set displaced-stepping off
stepi
warning: GDB can't find the start of the function at 0x4007f8.
0x004007f8 in ?? ()
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: stepi
p /x $pc
$2 = 0x4007f8
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=off: get after PC
PASS: gdb.base/step-over-no-symbols.exp: displaced=off: advanced
Remote debugging from host ...
monitor exit
(gdb) Killing process(es): ...
testcase .../gdb/testsuite/gdb.base/step-over-no-symbols.exp completed in 2 seconds
gdb/
* arch-utils.c (gdbarch_info_fill): Set `default_byte_order' to
the endianness selected.
* NEWS: Document `set endian auto' mode operation update.
gdb/doc/
* gdb.texinfo (Choosing Target Byte Order): Document endianness
selection details with the `set endian auto' mode.
gdb/testsuite
* gdb.base/endian.exp: New test.
* gdb.base/endian.c: New test source.
|
|
No code uses the new descriptions yet.
gdb/
* aarch64-linux-nat.c (aarch64_linux_read_description):
Add parmeter zero.
* aarch64-linux-tdep.c (aarch64_linux_core_read_description):
Likewise.
* aarch64-tdep.c (tdesc_aarch64_list): Add.
(aarch64_read_description): Use VQ to index tdesc_aarch64_list.
(aarch64_gdbarch_init): Add parmeter zero.
* aarch64-tdep.h (aarch64_read_description): Add VQ parmeter.
* arch/aarch64.c (aarch64_create_target_description): Check VQ.
* arch/aarch64.h (aarch64_create_target_description): Add VQ.
parmeter.
* doc/gdb.texinfo: Describe SVE feature
* features/aarch64-sve.c: New file.
gdbserver/
* linux-aarch64-tdesc.c (aarch64_linux_read_description): Add
null VQ.
|
|
This changes inferior.c to add Usage lines for all commands, and to
change how "metasyntactic variables" are written to conform to GNU
style.
While doing this I noticed that the manual doesn't document the
argument to "info inferiors", so I've added that as well.
ChangeLog
2018-04-27 Tom Tromey <tom@tromey.com>
* inferior.c (initialize_inferiors): Update help strings.
doc/ChangeLog
2018-04-27 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Inferiors and Programs): Document argument to "info
inferiors".
|
|
This changes the Python API so that breakpoint commands can be set by
writing to the "commands" attribute.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* NEWS: Mention that breakpoint commands are writable.
* python/py-breakpoint.c (bppy_set_commands): New function.
(breakpoint_object_getset) <"commands">: Use it.
doc/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* python.texi (Breakpoints In Python): Mention that "commands" is
writable.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* gdb.python/py-breakpoint.exp: Test setting breakpoint commands.
|
|
PR python/20084 points out that the Python API doesn't handle the
var_zuinteger and var_zuinteger_unlimited parameter types.
This patch adds support for these types.
Regression tested on x86-64 Fedora 26.
ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
PR python/20084:
* python/python.c (gdbpy_parameter_value): Handle var_zuinteger
and var_zuinteger_unlimited.
* python/py-param.c (struct parm_constant): Add PARAM_ZUINTEGER
and PARAM_ZUINTEGER_UNLIMITED.
(set_parameter_value): Handle var_zuinteger and
var_zuinteger_unlimited.
(add_setshow_generic): Likewise.
(parmpy_init): Likewise.
doc/ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
PR python/20084:
* python.texi (Parameters In Python): Document PARAM_ZUINTEGER and
PARAM_ZUINTEGER_UNLIMITED.
testsuite/ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
PR python/20084:
* gdb.python/py-parameter.exp: Add PARAM_ZUINTEGER and
PARAM_ZUINTEGER_UNLIMITED tests.
|
|
This adds an "alignof" attribute to gdb.Type in the Python API.
2018-04-30 Tom Tromey <tom@tromey.com>
* NEWS: Mention Type.align.
* python/py-type.c (typy_get_alignof): New function.
(type_object_getset): Add "alignof".
2018-04-30 Tom Tromey <tom@tromey.com>
* python.texi (Types In Python): Document Type.align.
2018-04-30 Tom Tromey <tom@tromey.com>
* gdb.python/py-type.exp: Check align attribute.
* gdb.python/py-type.c: New "aligncheck" global.
|
|
The GDB commands "info variables", "info functions", and "info types" show
the appropriate list of definitions matching the given pattern. They also
group them by source files. But no line numbers within these source files
are shown.
The line number information is particularly useful to the user when a
simple "grep" doesn't readily point to a definition. This is often the
case when the definition involves a macro, occurs within a namespace, or
when the identifier appears very frequently in the source file.
This patch enriches the printout of these commands by the line numbers and
adjusts affected test cases to the changed output where necessary. The
new output looks like this:
(gdb) i variables
All defined variables:
File foo.c:
3: const char * const foo;
1: int x;
The line number is followed by a colon and a tab character, which is then
followed by the symbol definition. If no line number is available, the
tab is printed out anyhow, so definitions line up.
gdb/ChangeLog:
* symtab.c (print_symbol_info): Precede the symbol definition by
the line number when available.
* NEWS: Advertise this enhancement.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Mention the fact that "info
variables/functions/types" show source files and line numbers.
gdb/testsuite/ChangeLog:
* gdb.ada/info_types.exp: Adjust expected output to the line
numbers now printed by "info var/func/type".
* gdb.base/completion.exp: Likewise.
* gdb.base/included.exp: Likewise.
* gdb.cp/cp-relocate.exp: Likewise.
* gdb.cp/cplusfuncs.exp: Likewise.
* gdb.cp/namespace.exp: Likewise.
* gdb.dwarf2/dw2-case-insensitive.exp: Likewise.
|
|
Add new set/show commands to set the processor that is used for enabling
errata workarounds when decoding branch trace.
The general format is "<vendor>:<identifier>" but we also allow two
special values "auto" and "none".
The default is "auto", which is the current behaviour of having GDB
determine the processor on which the trace was recorded.
If that cpu is not known to the trace decoder, e.g. when using an old
decoder on a new system, decode may fail with "unknown cpu". In most
cases it should suffice to 'downgrade' decode to assume an older cpu.
Unfortunately, we can't do this automatically.
The other special value, "none", disables errata workarounds.
gdb/
* NEWS (New options): announce set/show record btrace cpu.
* btrace.c: Include record-btrace.h.
(btrace_compute_ftrace_pt): Skip enabling errata workarounds if
the vendor is unknown.
(btrace_compute_ftrace_1): Add cpu parameter. Update callers.
Maybe overwrite the btrace configuration's cpu.
(btrace_compute_ftrace): Add cpu parameter. Update callers.
(btrace_fetch): Add cpu parameter. Update callers.
(btrace_maint_update_pt_packets): Call record_btrace_get_cpu.
Maybe overwrite the btrace configuration's cpu. Skip enabling
errata workarounds if the vendor is unknown.
* python/py-record-btrace.c: Include record-btrace.h.
(recpy_bt_begin, recpy_bt_end, recpy_bt_instruction_history)
(recpy_bt_function_call_history): Call record_btrace_get_cpu.
* record-btrace.c (record_btrace_cpu_state_kind): New.
(record_btrace_cpu): New.
(set_record_btrace_cpu_cmdlist): New.
(record_btrace_get_cpu): New.
(require_btrace_thread, record_btrace_info)
(record_btrace_resume_thread): Call record_btrace_get_cpu.
(cmd_set_record_btrace_cpu_none): New.
(cmd_set_record_btrace_cpu_auto): New.
(cmd_set_record_btrace_cpu): New.
(cmd_show_record_btrace_cpu): New.
(_initialize_record_btrace): Initialize set/show record btrace cpu
commands.
* record-btrace.h (record_btrace_get_cpu): New.
testsuite/
* gdb.btrace/cpu.exp: New.
doc/
* gdb.texinfo: Document set/show record btrace cpu.
|
|
This is a command we somehow forgot to contribute at the time the Ada
language was first contributed to the FSF. This command allows
the user to change the maximum size we allow when reading memory
from dynamic objects (the default is 65536 bytes).
At the moment, this limit is only used by Ada, and so the implementation
is kept inside ada-lang.c. However, it is conceivable that other language
might want to use it also to handle the same kind of issues; for instance,
this might be useful when handling dynamic types in C. So the name
of the setting was made language-neutral, to allow for this.
Note that an alias for "set var" needs to be introduced as well.
We are not adding a test for that, since this is a feature that is
already exercized by numerous existing tests.
gdb/ChangeLog
* NEWS: Add entry describing new "set|show varsize-limit" command.
* ada-lang.c (_initialize_ada_language): Add "set/show varsize-limit"
command.
* printcmd.c (_initialize_printcmd): Add "set var" alias of
"set variable".
gdb/doc/ChangeLog:
* gdb.texinfo (Ada Settings): New subsubsection.
gdb/testsuite/ChangeLog:
* gdb.ada/varsize_limit: New testcase.
Tested on x86_64-linux.
|
|
When a frame filter elides some frames, they are still printed by
"bt", indented a few spaces. PR backtrace/15582 notes that it would
be nice for users if elided frames could simply be dropped. This
patch adds this capability.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* stack.c (backtrace_command): Parse "hide" argument.
* python/py-framefilter.c (py_print_frame): Handle PRINT_HIDE.
* extension.h (enum frame_filter_flags) <PRINT_HIDE>: New
constant.
gdb/doc/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* gdb.texinfo (Backtrace): Mention "hide" argument.
gdb/testsuite/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* gdb.python/py-framefilter.exp: Add "bt hide" test.
|
|
The backtrace command has peculiar command-line parsing. In
particular, it splits the command line, then loops over the arguments.
If it sees a word it recognizes, like "full", it effectively drops
this word from the argument vector. Then, it pastes together the
remaining arguments, passing them on to backtrace_command_1, which in
turn passes the resulting string to parse_and_eval_long.
The documentation doesn't mention the parse_and_eval_long at all, so
it is a bit of a hidden feature that you can "bt 3*2". The strange
algorithm above also means you can "bt 3 * no-filters 2" and get 6
frames...
This patch changes backtrace's command line parsing to be a bit more
rational. Now, special words like "full" are only recognized at the
start of the command.
This also updates the documentation to describe the various bt options
individually.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* stack.c (backtrace_command): Rewrite command line parsing.
gdb/doc/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Backtrace): Describe options individually.
|
|
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
|
|
For now this just logs information about the state of the current LWP
for each STOPPED event in fbsd_wait().
gdb/ChangeLog:
* NEWS (Changes since GDB 8.1): Add "set/show debug fbsd-nat".
* fbsd-nat.c (debug_fbsd_nat): New variable.
(show_fbsd_nat_debug): New function.
(fbsd_wait): Log LWP info if "debug_fbsd_nat" is enabled.
(_initialize_fbsd_nat): Add "fbsd-nat" debug boolean command.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging Output): Document "set/show debug
fbsd-nat".
|
|
Extend the documentation of 'info line' command to:
1. Make 'info line' with no argument more obvious, and make it clearer
what this does.
2. Cover what happens when a secod 'info line' with no argument is
issued.
3. Extend the example output for 'info line ...' to include
symbolic addresses.
gdb/doc/ChangeLog:
* gdb.texinfo (Machine Code): Additional information about "info
line" command.
|
|
Following my previous commit which add support for stopping at start of
exception handler, this commit adds required gdb-mi support for this
feature.
gdb/ChangeLog:
* mi/mi-cmd-catch.c (mi_cmd_catch_handlers): New function.
* mi/mi-cmds.c (mi_cmds): Add catch-handlers command.
* mi/mi-cmds.h (mi_cmd_catch_handlers): Add external declaration.
* NEWS: Document "-catch-handlers" command.
gdb/doc/ChangeLog:
* gdb.texinfo (Ada Exception gdb/mi Catchpoints): Add
documentation for new "-catch-handlers" command.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_catch_ex_hand.exp: New testcase.
* gdb.ada/mi_catch_ex_hand/foo.adb: New file.
Tested on x86_64-linux.
|
|
Add incorrectly removed @pindex back.
gdb/doc/ChangeLog:
* gdb.texinfo (gdb-add-index man): Add pindex.
|
|
With old makeinfo (version 4.13) the changes introduced in
commit ba643918cf869fa0d064d733f69b453b6fe642ea
Author: Sergio Durigan Junior <sergiodj@redhat.com>
Install and generate docs for gdb-add-index
fail to build with
gdb/doc/gdb.texinfo:2498: warning: `.' or `,' must follow @xref, not `@'.
gdb/doc/gdb.texinfo:2517: warning: `.' or `,' must follow @xref, not `@'.
gdb/doc/gdb.texinfo:43443: Node `gdb-add-index man' requires a sectioning command (e.g., @unnumberedsubsec).
gdb/doc/gdb.texinfo:43443: `gdb-add-index man' has no Up field (perhaps incorrect sectioning?).
gdb/doc/gdb.texinfo:43350: Next field of node `gdbinit man' not pointed to (perhaps incorrect sectioning?).
gdb/doc/gdb.texinfo:43443: This node (gdb-add-index man) has the bad Prev.
This patch fixes the warnings too.
gdb/doc/ChangeLog:
* gdb.texinfo (set cwd): Add period.
(gdb-add-index man): Move anchor.
|
|
The "gdb-add-index" script has been resurrected on:
commit caf26be91a584ef141ac5d3cb31007731af8b8e3
Author: Samuel Bronson <naesten@gmail.com>
Date: Fri Nov 15 16:09:33 2013 -0500
Resurrect gdb-add-index as a contrib script
However, for some reason (I couldn't find it in the archives), only
the script has been checked-in; the Makefile parts responsible for
installing it in the system were left out. This commit fixes that, by
also resurrecting the Makefile and documentation bits.
This commit is part of our effort to upstream the local Fedora GDB
changes. With this commit, we'll only carry a very small
Fedora-specific modification to the script.
gdb/ChangeLog:
2017-01-12 Tom Tromey <tom@tromey.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (install-only): Install gdb-add-index.
gdb/doc/ChangeLog:
2017-01-12 Tom Tromey <tom@tromey.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Index Files): Mention gdb-add-index.
(gdb-add-index man): New section.
* Makefile.in (gdb-add-index.1): New rule to generate manpage
from gdb.texinfo.
|
|
With old makeinfo (version 4.13) the changes introduced in
commit 2d97a5d9d33aea87c3bd02fd1fa417f5d4e1fa05
Author: John Baldwin <jhb@FreeBSD.org>
Document support for 'info proc' on FreeBSD.
fail to build.
gdb/doc/ChangeLog:
* gdb.texinfo (pwd): Fix whitespace.
|
|
Since the 'info proc' support on FreeBSD does not use /proc, reword
the documentation for 'info proc' to not assume /proc. This includes
renaming the node to 'Process Information' and suggesting that
additional process information can be queried via different
OS-specific interfaces. This is also cleans up the description of
'info proc' support for core files a bit as /proc is not used for core
file support on any current platform.
gdb/ChangeLog:
* NEWS: Document that 'info proc' now works on FreeBSD.
gdb/doc/ChangeLog:
* gdb.texinfo (pwd): Update cross-reference for Process Information
node and remove explicit /proc reference.
(Native): Rename subsection from SVR4 Process Information to
Process Information.
(Process Information): Reword introduction to be less /proc
centric. Document support for "info proc" on FreeBSD.
|
|
When using gdb for debugging Ada source code, there are several catchpoint
types you can define in order to stop upon certain conditions. Let's
use this small example:
procedure Foo is
begin
begin
raise Constraint_Error;
exception
when Program_Error =>
null;
when Constraint_Error =>
null;
when others =>
null;
end;
end Foo;
One can stop when the exception is being raised by using the exception
catchpoint like below:
(gdb) catch exception
Catchpoint 1: all Ada exceptions
(gdb)
In that case, when running Foo, gdb will stop at the line where the exception
was raised:
begin
>>> raise Constraint_Error;
exception
This patch introduces new type of catchpoint, when the user wants to stop
at the location of the exception handling.
Imagine we want to stop on any exception handled by the program, we can do:
(gdb) catch handlers
Catchpoint 1: all Ada exceptions handlers
(gdb) r
Starting program: /tmp/foo
By doing so, when running Foo, gdb will stop here:
Catchpoint 1, exception at 0x000000000040255a in foo () at foo.adb:25
25 when Constraint_Error =>
(gdb)
It is also possible to stop when the Constraint_Error exception is being
handled in this program. With this patch, we can use:
(gdb) catch handlers Constraint_Error
Catchpoint 1: `Constraint_Error' Ada exception handlers
(gdb)
Like for other catchpoint, you can set a condition when adding a catchpoint
on exception handlers.
Here the handlers catchpoint checks Global_Var:
(gdb) catch handlers Constraint_Error if Global_Var /= 0
gdb/ChangeLog:
* ada-lang.h (ada_exception_catchpoint_kind) <ada_catch_handlers>:
Add field.
* ada-lang.c (struct exception_support_info) <catch_handlers_sym>:
Add field.
(default_exception_support_info) <catch_handlers_sym>: Add field.
(exception_support_info_fallback) <catch_handlers_sym>: Add field.
(ada_exception_name_addr_1): Add "catch handlers" handling.
(ada_exception_catchpoint_cond_string) <ex>: New parameter.
Update all callers.
(create_excep_cond_exprs) <ex>: Add parameter.
(re_set_exception): Update create_excep_cond_exprs call.
(print_it_exception, print_one_exception, print_mention_exception)
(print_recreate_exception): Add "catch handler" handling.
(allocate_location_catch_handlers, re_set_catch_handlers)
(check_status_catch_handlers, print_it_catch_handlers)
(print_one_catch_handlers, print_mention_catch_handlers)
(print_recreate_catch_handlers): New function.
(catch_handlers_breakpoint_ops): New variable.
(catch_ada_exception_command_split) <is_catch_handlers_cmd>:
Add parameter. Add "catch handler" handling.
(ada_exception_sym_name, ada_exception_breakpoint_ops):
Add "catch handler" handling.
(ada_exception_catchpoint_cond_string): Add "catch handler"
handling.
(create_ada_exception_catchpoint): Update create_excep_cond_exprs
call.
(catch_ada_handlers_command): New function.
(initialize_ada_catchpoint_ops): Initialize "catch handlers"
operations structure.
(_initialize_ada_language): Add "catch handlers" command entry.
* NEWS: Document "catch handlers" feature.
gdb/doc/ChangeLog:
* gdb.texinfo (Set Catchpoints): Add documentation for new
"catch handlers" action.
gdb/testsuite/ChangeLog:
* gdb.ada/excep_handle.exp: New testcase.
* gdb.ada/excep_handle/foo.adb: New file.
* gdb.ada/excep_handle/pck.ads: New file.
Tested on x86_64-linux.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
tdesc_register_in_reggroup_p in now able to handle arbitrary
groups. This is useful when groups are created while the
target descriptor file is received from the remote.
This can be the case of a soft core target processor where
registers/groups can change.
gdb/ChangeLog:
yyyy-mm-dd Franck Jullien <franck.jullien@gmail.com>
Stafford Horne <shorne@gmail.com>
* target-descriptions.c (tdesc_register_in_reggroup_p): Support
arbitrary strings.
(tdesc_use_registers): Add logic to register new reggroups.
(tdesc_reg::group): Update comment to indicate we allow
arbitrary strings.
* NEWS (Changes since GDB 8.0): Announce that GDB supports
arbitrary reggroups.
gdb/testsuite/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* gdb.xml/extra-regs.xml: Add example foo reggroup.
* gdb.xml/tdesc-regs.exp: Add test to check for foo reggroup.
gdb/doc/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* gdb.texinfo (Target Description Format): Explain that arbitrary
strings are now allowed for register groups.
|