aboutsummaryrefslogtreecommitdiff
path: root/gdb/doc
AgeCommit message (Collapse)AuthorFilesLines
2010-07-01 * gdb.texinfo (Create and Delete Tracepoints): Add more indexPedro Alves2-1/+9
entries for fast tracepoints and static tracepoints.
2010-07-01 * gdb.texinfo (General Query Packets) <qfThreadInfo,Pedro Alves2-1/+6
qsThreadInfo>: Spell out `l' as ell.
2010-07-01 Static tracepoints support, and UST integration.Pedro Alves2-12/+270
gdb/gdbserver/ * configure.ac: Handle --with-ust. substitute ustlibs and ustinc. * mem-break.c (uninsert_all_breakpoints) (reinsert_all_breakpoints): New. * mem-break.h (reinsert_all_breakpoints, uninsert_all_breakpoints): * tracepoint.c (ust_loaded, helper_thread_id, cmd_buf): New. (gdb_agent_ust_loaded, helper_thread_id) (gdb_agent_helper_thread_id): New macros. (struct ipa_sym_addresses): Add addr_ust_loaded, addr_helper_thread_id, addr_cmd_buf. (symbol_list): Add ust_loaded, helper_thread_id, cmd_buf. (in_process_agent_loaded_ust): New. (write_e_ust_not_loaded): New. (maybe_write_ipa_ust_not_loaded): New. (struct collect_static_trace_data_action): New. (enum tracepoint_type) <static_tracepoint>: New. (struct tracepoint) <handle>: Mention static tracepoints. (struct static_tracepoint_ctx): New. (CMD_BUF_SIZE): New. (add_tracepoint_action): Handle static tracepoint actions. (unprobe_marker_at): New. (clear_installed_tracepoints): Handle static tracepoints. (cmd_qtdp): Handle static tracepoints. (probe_marker_at): New. (cmd_qtstart): Handle static tracepoints. (response_tracepoint): Handle static tracepoints. (cmd_qtfstm, cmd_qtsstm, cmd_qtstmat): New. (handle_tracepoint_query): Handle qTfSTM, qTsSTM and qTSTMat. (get_context_regcache): Handle static tracepoints. (do_action_at_tracepoint): Handle static tracepoint actions. (traceframe_find_block_type): Handle static trace data blocks. (traceframe_read_sdata): New. (download_tracepoints): Download static tracepoint actions. [HAVE_UST] Include ust/ust.h, dlfcn.h, sys/socket.h, and sys/un.h. (GDB_PROBE_NAME): New. (ust_ops): New. (GET_UST_SYM): New. (USTF): New. (dlsym_ust): New. (ust_marker_to_static_tracepoint): New. (gdb_probe): New. (collect_ust_data_at_tracepoint): New. (gdb_ust_probe): New. (UNIX_PATH_MAX, SOCK_DIR): New. (gdb_ust_connect_sync_socket): New. (resume_thread, stop_thread): New. (run_inferior_command): New. (init_named_socket): New. (gdb_ust_socket_init): New. (cstr_to_hexstr): New. (next_st): New. (first_marker, next_marker): New. (response_ust_marker): New. (cmd_qtfstm, cmd_qtsstm): New. (unprobe_marker_at, probe_marker_at): New. (cmd_qtstmat, gdb_ust_thread): New. (gdb_ust_init): New. (initialize_tracepoint_ftlib): Call gdb_ust_init. * linux-amd64-ipa.c [HAVE_UST]: Include ust/processor.h (ST_REGENTRY): New. (x86_64_st_collect_regmap): New. (X86_64_NUM_ST_COLLECT_GREGS): New. (AMD64_RIP_REGNUM): New. (supply_static_tracepoint_registers): New. * linux-i386-ipa.c [HAVE_UST]: Include ust/processor.h (ST_REGENTRY): New. (i386_st_collect_regmap): New. (i386_NUM_ST_COLLECT_GREGS): New. (supply_static_tracepoint_registers): New. * server.c (handle_query): Handle qXfer:statictrace:read. <qSupported>: Report support for StaticTracepoints, and qXfer:statictrace:read features. * server.h (traceframe_read_sdata) (supply_static_tracepoint_registers): Declare. * remote-utils.c (convert_int_to_ascii, hexchars, ishex, tohex) (unpack_varlen_hex): Include in IPA build. * Makefile.in (ustlibs, ustinc): New. (IPA_OBJS): Add remote-utils-ipa.o. ($(IPA_LIB)): Link -ldl and -lpthread. (UST_CFLAGS): New. (IPAGENT_CFLAGS): Add UST_CFLAGS. * config.in, configure: Regenerate. gdb/ * NEWS: Mention new support for static tracepoints. (New packets): Mention qTfSTM, qTsSTM, qTSTMat and qXfer:statictrace:read. (New features in the GDB remote stub, GDBserver): Mention static tracepoints support using an UST based backend. (New commands): Mention "info static-tracepoint-markers" and "strace". * breakpoint.c (is_marker_spec): New. (is_tracepoint): Handle static tracepoints. (validate_commands_for_breakpoint): Static tracepoints can't do while-stepping. (static_tracepoints_here): New. (bpstat_what): Handle static tracepoints. (print_one_breakpoint_location, allocate_bp_location, mention): Ditto. (create_breakpoint_sal): Ditto. (decode_static_tracepoint_spec): New. (create_breakpoint): Replace `hardwareflag', and `traceflag' with `type_wanted'. Adjust. Handle static tracepoint marker locations. (break_command_1): Adjust. (update_static_tracepoint): New. (update_breakpoint_locations): Handle static tracepoints. (breakpoint_re_set_one): Handle static tracepoint marker locations. (disable_command, enable_command): Handle static tracepoints. (trace_command, ftrace_command): Adjust. (strace_command): New. (create_tracepoint_from_upload): Adjust. (save_breakpoints): Handle static tracepoints. (_initialize_breakpoint): Install the "strace" command. * breakpoint.h (enum bptype): New bp_static_tracepoint type. (struct breakpoint): New fields static_trace_marker_id and static_trace_marker_id_idx. (breakpoints_here_p): Declare. (create_breakpoint): Adjust. (static_tracepoints_here): Declare. * remote.c (struct remote_state) <static_tracepoints>: New field. (PACKET_qXfer_statictrace_read, PACKET_StaticTracepoints): New. (remote_static_tracepoint_marker_at): New. (remote_static_tracepoint_markers_by_strid): New. (remote_static_tracepoint_feature): New. (remote_disconnected_tracing_feature): Handle "StaticTracepoints". (remote_xfer_partial): Handle TARGET_OBJECT_STATIC_TRACE_DATA. (remote_supports_static_tracepoints): New. (remote_download_tracepoint): Download static tracepoints. (init_remote_ops): Install remote_static_tracepoint_marker_at and remote_static_tracepoint_markers_by_strid. (_initialize_remote): Install set|show remote static-tracepoints, and set|show remote read-sdata-object commands. * target.c (update_current_target): Inherit and default to_static_tracepoint_marker_at, and to_static_tracepoint_markers_by_strid. * target.h (static_tracepoint_marker): Forward declare. (enum target_object): New object TARGET_OBJECT_STATIC_TRACE_DATA. (static_tracepoint_marker_p): New typedef. (DEF_VEC_P(static_tracepoint_marker_p)): New VEC type. (struct target_ops): New fields to_static_tracepoint_marker_at and to_static_tracepoint_markers_by_strid. (target_static_tracepoint_marker_at) (target_static_tracepoint_markers_by_strid): New. * tracepoint.c: Include source.h. (validate_actionline): Handle $_sdata. (struct collection_list): New field strace_data. (add_static_trace_data): New. (clear_collection_list): Clear strace_data. (stringify_collection_list): Account for a possible static trace data collection. (encode_actions_1): Encode an $_sdata collection. (parse_tracepoint_definition): Handle static tracepoints. (parse_static_tracepoint_marker_definition): New. (release_static_tracepoint_marker): New. (print_one_static_tracepoint_marker): New. (info_static_tracepoint_markers_command): New. (sdata_make_value): New. (_initialize_tracepoint): Create the $_sdata convenience variable. Add the "info static-tracepoint-markers" command. Mention $_sdata in the "collect" command's help output. * tracepoint.h (struct static_tracepoint_marker): New. (parse_static_tracepoint_marker_definition) (release_static_tracepoint_marker): Declare. * mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust. * python/py-breakpoint.c (bppy_new): Adjust. doc/ * gdb.texinfo (Convenience Variables): Document $_sdata. (Commands to Set Tracepoints): Describe static tracepoints. Add `Listing Static Tracepoint Markers' menu entry. Document "strace". (Tracepoint Action Lists): Document collecting $_sdata. (Listing Static Tracepoint Markers): New subsection. (Tracepoints support in gdbserver): Mention static tracepoints. (remote packets, enabling and disabling): Mention read-sdata-object. (General Query Packets) <qSupported>: Document qXfer:sdata:read and StaticTracepoint. Mention qTfSTM, qTsSTM and qTSTMat as tracepoint packets. Document qXfer:sdata:read. (Tracepoint packets): Document qTfSTM, qTsSTM and qTSTMat.
2010-06-29Fix unmatched @end table in gdb.texinfo.Joel Brobecker2-0/+5
2010-06-29 Joel Brobecker <brobecker@adacore.com> * gdb.texinfo (Threads In Python): Fix unmatched @end table.
2010-06-282010-06-28 Phil Muldoon <pmuldoon@redhat.com>Phil Muldoon2-0/+135
Tom Tromey <tromey@redhat.com> Thiago Jung Bauermann <bauerman@br.ibm.com> * value.c (pack_unsigned_long): New function. (value_from_ulongest): New function. * value.h (value_from_ulongest): Declare. * python/python.c (_initialize_python): Call gdbpy_initialize_thread and gdbpy_initialize_inferior. * python/python-internal.h: Define thread_object. (gdbpy_inferiors, gdbpy_selected_thread) (frame_info_to_frame_object, create_thread_object) (find_thread_object, find_inferior_object) (gdbpy_initialize_thread, gdbpy_initialize_inferiors) (gdbpy_is_value_object, get_addr_from_python): Declare. * python/py-value.c (builtin_type_upylong): Define. (convert_value_from_python): Add logic for ulongest. (gdbpy_is_value_object): New function. * python/py-utils.c (get_addr_from_python): New function. * python/py-frame.c (frame_info_to_frame_object): Return a PyObject. (gdbpy_selected_frame): Use PyObject over frame_info. * Makefile.in (SUBDIR_PYTHON_OBS): Add py-inferior and py-infthread. (SUBDIR_PYTHON_SRCS): Likewise. (py-inferior.o): New Rule. (py-infthread.o): New Rule. * python/py-inferior.c: New File. * python/py-infthread.c: New File. 2010-06-28 Phil Muldoon <pmuldoon@redhat.com> Tom Tromey <tromey@redhat.com> Thiago Jung Bauermann <bauerman@br.ibm.com> * gdb.texinfo (Inferiors In Python): New node. * gdb.texinfo (Threads In Python): New node. 2010-06-28 Phil Muldoon <pmuldoon@redhat.com> Tom Tromey <tromey@redhat.com> Thiago Jung Bauermann <bauerman@br.ibm.com> * gdb.python/py-inferior.c: New File. * gdb.python/py-infthread.c: New File. * gdb.python/py-inferior.exp: New File. * gdb.python/py-infthread.exp: New File.
2010-06-28Document the GDB python directory.Joel Brobecker2-0/+18
2010-06-27 Joel Brobecker <brobecker@adacore.com> * NEWS: Add entry announcing the python directory. 2010-06-27 Joel Brobecker <brobecker@adacore.com> * gdb.texinfo (Python): Document what the python directory is and what its location is. (Basic Python): Document the gdb.PYTHONDIR constant.
2010-06-25gdbTom Tromey2-2/+12
PR python/10808: * python/python.c (execute_gdb_command): Add keywords. Accept "to_string" argument. (struct restore_ui_file_closure): New. (restore_ui_file): New function. (make_cleanup_restore_ui_file): Likewise. (GdbMethods) <execute>: Update. gdb/doc PR python/10808: * gdb.texinfo (Basic Python): Document new gdb.execute argument. gdb/testsuite PR python/10808: * gdb.python/python.exp: Add new tests.
2010-06-24Add command "eval".Hui Zhu2-0/+10
2010-06-222010-06-21 Stan Shebs <stan@codesourcery.com>Stan Shebs5-8/+16
* gdb.texinfo: Add explicit @node and @appendix for GFDL. * annotate.texinfo: Ditto. * gdbint.texinfo: Ditto. * stabs.texinfo: Ditto.
2010-06-222010-06-22 Hui Zhu <teawater@gmail.com>Hui Zhu2-0/+21
* i386-tdep.c (i386_record_lea_modrm): Change warning to query. (i386_process_record): Ditto. * record.c (record_memory_query): New variable. (_initialize_record): New command "set record memory-query". * record.h (record_memory_query): New extern. 2010-06-22 Hui Zhu <teawater@gmail.com> * gdb.texinfo: (Process Record and Replay): Add documentation for command "set record memory-query".
2010-06-212010-06-21 Stan Shebs <stan@codesourcery.com>Stan Shebs6-23/+84
* gdb.texinfo: Relicense under GFDL version 1.3. * annotate.texinfo: Relicense under GFDL version 1.3. * gdbint.texinfo: Relicense under GFDL version 1.3. * stabs.texinfo: Relicense under GFDL version 1.3. * fdl.texi: Update to version 1.3.
2010-06-182010-06-18 Stan Shebs <stan@codesourcery.com>Stan Shebs2-0/+9
* osdata.c (get_osdata): Warn separately if target does not report type list. (info_osdata_command): Allow empty type, report error if target does not return available types of OS data. * linux-nat.c (linux_nat_xfer_osdata): Report list of OS data types if no annex supplied. * gdb.texinfo (Operating System Auxiliary Information): Describe "info os" when no arguments given.
2010-06-18 * thread.c (thread_id_make_value): Make a value representing theStan Shebs2-0/+12
current thread. (_initialize_thread): Create $_thread. * gdb.texinfo (Debugging Programs with Multiple Threads): Describe $_thread. * gdb.threads/thread-specific.exp: Add tests of $_thread.
2010-06-182010-06-18 Hui Zhu <teawater@gmail.com>Hui Zhu2-0/+16
* gdb.texinfo: (Process Record and Replay): Add documentation for commands "record save" and "record restore".
2010-06-16gdb/ChangeLog:Sergio Durigan Junior2-0/+17
2010-06-16 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * breakpoint.c: Include parser-defs.h. (watchpoint_exp_is_const): New function. (watch_command_1): Call watchpoint_exp_is_const to check if the expression is constant. gdb/doc/ChangeLog: 2010-06-16 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.texinfo: Include information about the correct use of addresses in the `watch' command. gdb/testsuite/ChangeLog: 2010-06-16 Jan Kratochvil <jan.kratochvil@redhat.com> Sergio Durigan Junior <sergiodj@redhat.com> * gdb.base/watch-notconst.c: New file. * gdb.base/watch-notconst.S: New file. * gdb.base/watch-notconst2.c: New file. * gdb.base/watch-notconst2.S: New file. * gdb.base/watch-notconst.exp: New file. * gdb.base/watchpoint.c (global_ptr_ptr): New variable. (func4): Add operations on `global_ptr_ptr'. * gdb.base/watchpoint.exp (test_constant_watchpoint): New routine to test watchpoints created with a constant expression. (test_inaccessible_watchpoint): Include tests for watchpoints created with a constant expression.
2010-06-122010-06-11 Stan Shebs <stan@codesourcery.com>Stan Shebs2-0/+123
Add per-operation permission flags. * target.h (struct target_ops): New method to_set_permissions. (target_set_permissions): New macro. (target_insert_breakpoint): Change macro to function. (target_remove_breakpoint): Ditto. (target_stop): Ditto. (may_write_registers): Declare. (may_write_memory): Declare. (may_insert_breakpoints): Declare. (may_insert_tracepoints): Declare. (may_insert_fast_tracepoints): Declare. (may_stop): Declare. * target.c (may_write_registers, may_write_registers_1): New globals. (may_write_memory, may_write_memory_1): New globals. (may_insert_breakpoints, may_insert_breakpoints_1): New globals. (may_insert_tracepoints, may_insert_tracepoints_1): New globals. (may_insert_fast_tracepoints, may_insert_fast_tracepoints_1): New globals. (may_stop, may_stop_1): New global. (target_xfer_partial): Test for write permission. (target_store_registers): Ditto. (target_insert_breakpoint): New function. (target_remove_breakpoint): New function. (target_stop): New function. (_initialize_targets): Add new set/show variables. (set_write_memory_permission): New function. (update_target_permissions): New function. (set_target_permissions): New function. (update_current_target): Default to_set_permissions. (_initialize_targets): Use new globals and setter function. * tracepoint.c (start_tracing): Test for permission. * inferior.h (update_observer_mode): Declare. * infrun.c (non_stop_1): Define earlier. (observer_mode, observer_mode_1): New globals. (set_observer_mode, show_observer_mode): New functions. (update_observer_mode): New function. (_initialize_infrun): Define "set observer" command. * remote.c (PACKET_QAllow): New optional packet. (remote_protocol_features): Add QAllow. (remote_set_permissions): New function. (remote_start_remote): Call it. (init_remote_ops): Add it to target vector. (_initialize_remote): Add config command for QAllow. * gdb.texinfo (Observer Mode): New section. (General Query Packets): Document QAllow. * gdb.base/permissions.exp: New file.
2010-06-04 Add support for enabling/disabling individual pretty-printers.Doug Evans2-4/+30
* python/py-prettyprint.c (search_pp_list): Skip disabled printers. * python/python-internal.h (gdbpy_enabled_cst): Declare. * python/python.c (gdbpy_enabled_cst): Define. (_initialize_python): Initialize gdbpy_enabled_cst. * NEWS: Add entry. doc/ * gdb.texinfo (Python API): New node `Disabling Pretty-Printers'. testsuite/ * gdb.python/py-prettyprint.exp: Add new test for enabled and disabled printers. * gdb.python/py-prettyprint.py (disable_lookup_function): New function. (enable_lookup_function): New function.
2010-06-03 * gdbint.texinfo (Coding): Add subsection on command names.Doug Evans2-0/+8
2010-06-02gdbTom Tromey2-0/+30
* dwarf2loc.h (dwarf2_per_cu_data): Declare. * dwarf2read.c (dwarf_stack_op_name): No longer static. Return type is const. Add 'def' argument. Add missing operators, remove unhandled ones. (decode_locdesc): Update. (dwarf2_always_disassemble): New global. (show_dwarf2_always_disassemble): New function. (_initialize_dwarf2_read): Add always-disassemble. (dwarf2_per_cu_offset_size): New function. * dwarf2loc.c (dwarf2_always_disassemble): Declare. (piece_end_p): New function. (locexpr_describe_location_piece): Replace 'size' argument with 'end'. Use piece_end_p. Rewrite recognition of TLS. Recognize some constants. Remove errors. (disassemble_dwarf_expression): New function. (locexpr_describe_location_1): Use disassemble_dwarf_expression. Add 'offset_size' argument. (loclist_describe_location): Change output formatting. * dwarf2expr.h (dwarf_stack_op_name): Declare. gdb/doc * gdb.texinfo (Maintenance Commands): Document maint set dwarf2 always-disassemble.
2010-06-01gdb/gdbserver/Pedro Alves2-0/+85
2010-06-01 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> * Makefile.in (IPA_DEPFILES, extra_libraries): New. (all): Depend on $(extra_libraries). (install-only): Install the IPA. (IPA_OBJS, IPA_LIB): New. (clean): Remove the IPA lib. (IPAGENT_CFLAGS): New. (tracepoint-ipa.o, utils-ipa.o, remote-utils-ipa.o) (regcache-ipa.o, i386-linux-ipa.o, linux-i386-ipa.o) (linux-amd64-ipa.o, amd64-linux-ipa.o): New rules. * linux-amd64-ipa.c, linux-i386-ipa.c: New files. * configure.ac: Check for atomic builtins support in the compiler. (IPA_DEPFILES, extra_libraries): Define. * configure.srv (ipa_obj): Add description. (ipa_i386_linux_regobj, ipa_amd64_linux_regobj): Define. (i[34567]86-*-linux*): Set ipa_obj. (x86_64-*-linux*): Set ipa_obj. * linux-low.c (stabilizing_threads): New. (supports_fast_tracepoints): New. (linux_detach): Stabilize threads before detaching. (handle_tracepoints): Handle internal tracing breakpoints. Assert the lwp is either not stabilizing, or is moving out of a jump pad. (linux_fast_tracepoint_collecting): New. (maybe_move_out_of_jump_pad): New. (enqueue_one_deferred_signal): New. (dequeue_one_deferred_signal): New. (linux_wait_for_event_1): If moving out of a jump pad, defer pending signals to later. (linux_stabilize_threads): New. (linux_wait_1): Check if threads need moving out of jump pads, and do it if so. (stuck_in_jump_pad_callback): New. (move_out_of_jump_pad_callback): New. (lwp_running): New. (linux_resume_one_lwp): Handle moving out of jump pads. (linux_set_resume_request): Dequeue deferred signals. (need_step_over_p): Also step over fast tracepoint jumps. (start_step_over): Also uninsert fast tracepoint jumps. (finish_step_over): Also reinsert fast tracepoint jumps. (linux_install_fast_tracepoint_jump): New. (linux_target_ops): Install linux_stabilize_threads and linux_install_fast_tracepoint_jump_pad. * linux-low.h (linux_target_ops) <get_thread_area, install_fast_tracepoint_jump_pad>: New fields. (struct lwp_info) <collecting_fast_tracepoint, pending_signals_to_report, exit_jump_pad_bkpt>: New fields. (linux_get_thread_area): Declare. * linux-x86-low.c (jump_insn): New. (x86_get_thread_area): New. (append_insns): New. (push_opcode): New. (amd64_install_fast_tracepoint_jump_pad): New. (i386_install_fast_tracepoint_jump_pad): New. (x86_install_fast_tracepoint_jump_pad): New. (the_low_target): Install x86_get_thread_area and x86_install_fast_tracepoint_jump_pad. * mem-break.c (set_raw_breakpoint_at): Use read_inferior_memory. (struct fast_tracepoint_jump): New. (fast_tracepoint_jump_insn): New. (fast_tracepoint_jump_shadow): New. (find_fast_tracepoint_jump_at): New. (fast_tracepoint_jump_here): New. (delete_fast_tracepoint_jump): New. (set_fast_tracepoint_jump): New. (uninsert_fast_tracepoint_jumps_at): New. (reinsert_fast_tracepoint_jumps_at): New. (set_breakpoint_at): Use write_inferior_memory. (uninsert_raw_breakpoint): Use write_inferior_memory. (check_mem_read): Mask out fast tracepoint jumps. (check_mem_write): Mask out fast tracepoint jumps. * mem-break.h (struct fast_tracepoint_jump): Forward declare. (set_fast_tracepoint_jump): Declare. (delete_fast_tracepoint_jump) (fast_tracepoint_jump_here, uninsert_fast_tracepoint_jumps_at) (reinsert_fast_tracepoint_jumps_at): Declare. * regcache.c: Don't compile many functions when building the in-process agent library. (init_register_cache) [IN_PROCESS_AGENT]: Don't allow allocating the register buffer in the heap. (free_register_cache): If the register buffer isn't owned by the regcache, don't free it. (set_register_cache) [IN_PROCESS_AGENT]: Don't re-alocate pre-existing register caches. * remote-utils.c (convert_int_to_ascii): Constify `from' parameter type. (convert_ascii_to_int): : Constify `from' parameter type. (decode_M_packet, decode_X_packet): Replace the `to' parameter by a `to_p' pointer to pointer parameter. If TO_P is NULL, malloc the needed buffer in-place. (relocate_instruction): New. * server.c (handle_query) <qSymbols>: If the target supports tracepoints, give it a chance of looking up symbols. Report support for fast tracepoints. (handle_status): Stabilize threads. (process_serial_event): Adjust. * server.h (struct fast_tracepoint_jump): Forward declare. (struct process_info) <fast_tracepoint_jumps>: New field. (convert_ascii_to_int, convert_int_to_ascii): Adjust. (decode_X_packet, decode_M_packet): Adjust. (relocate_instruction): Declare. (in_process_agent_loaded): Declare. (tracepoint_look_up_symbols): Declare. (struct fast_tpoint_collect_status): Declare. (fast_tracepoint_collecting): Declare. (force_unlock_trace_buffer): Declare. (handle_tracepoint_bkpts): Declare. (initialize_low_tracepoint) (supply_fast_tracepoint_registers) [IN_PROCESS_AGENT]: Declare. * target.h (struct target_ops) <stabilize_threads, install_fast_tracepoint_jump_pad>: New fields. (stabilize_threads, install_fast_tracepoint_jump_pad): New. * tracepoint.c [HAVE_MALLOC_H]: Include malloc.h. [HAVE_STDINT_H]: Include stdint.h. (trace_debug_1): Rename to ... (trace_vdebug): ... this. (trace_debug): Rename to ... (trace_debug_1): ... this. Add `level' parameter. (trace_debug): New. (ATTR_USED, ATTR_NOINLINE): New. (IP_AGENT_EXPORT): New. (gdb_tp_heap_buffer, gdb_jump_pad_buffer, gdb_jump_pad_buffer_end) (collecting, gdb_collect, stop_tracing, flush_trace_buffer) (about_to_request_buffer_space, trace_buffer_is_full) (stopping_tracepoint, expr_eval_result, error_tracepoint) (tracepoints, tracing, trace_buffer_ctrl, trace_buffer_ctrl_curr) (trace_buffer_lo, trace_buffer_hi, traceframe_read_count) (traceframe_write_count, traceframes_created) (trace_state_variables) New renaming defines. (struct ipa_sym_addresses): New. (STRINGIZE_1, STRINGIZE, IPA_SYM): New. (symbol_list): New. (ipa_sym_addrs): New. (all_tracepoint_symbols_looked_up): New. (in_process_agent_loaded): New. (write_e_ipa_not_loaded): New. (maybe_write_ipa_not_loaded): New. (tracepoint_look_up_symbols): New. (debug_threads) [IN_PROCESS_AGENT]: New. (read_inferior_memory) [IN_PROCESS_AGENT]: New. (UNKNOWN_SIDE_EFFECTS): New. (stop_tracing): New. (flush_trace_buffer): New. (stop_tracing_bkpt): New. (flush_trace_buffer_bkpt): New. (read_inferior_integer): New. (read_inferior_uinteger): New. (read_inferior_data_pointer): New. (write_inferior_data_pointer): New. (write_inferior_integer): New. (write_inferior_uinteger): New. (struct collect_static_trace_data_action): Delete. (enum tracepoint_type): New. (struct tracepoint) <type>: New field `type'. <actions_str, step_actions, step_actions_str>: Only include in GDBserver. <orig_size, obj_addr_on_target, adjusted_insn_addr> <adjusted_insn_addr_end, jump_pad, jump_pad_end>: New fields. (tracepoints): Use IP_AGENT_EXPORT. (last_tracepoint): Don't include in the IPA. (stopping_tracepoint): Use IP_AGENT_EXPORT. (trace_buffer_is_full): Use IP_AGENT_EXPORT. (alloced_trace_state_variables): New. (trace_state_variables): Use IP_AGENT_EXPORT. (traceframe_t): Delete unused variable. (circular_trace_buffer): Don't include in the IPA. (trace_buffer_start): Delete. (struct trace_buffer_control): New. (trace_buffer_free): Delete. (struct ipa_trace_buffer_control): New. (GDBSERVER_FLUSH_COUNT_MASK, GDBSERVER_FLUSH_COUNT_MASK_PREV) (GDBSERVER_FLUSH_COUNT_MASK_CURR, GDBSERVER_UPDATED_FLUSH_COUNT_BIT): New. (trace_buffer_ctrl): New. (TRACE_BUFFER_CTRL_CURR): New. (trace_buffer_start, trace_buffer_free, trace_buffer_end_free): Reimplement as macros. (trace_buffer_wrap): Delete. (traceframe_write_count, traceframe_read_count) (traceframes_created, tracing): Use IP_AGENT_EXPORT. (struct tracepoint_hit_ctx) <type>: New field. (struct fast_tracepoint_ctx): New. (memory_barrier): New. (cmpxchg): New. (record_tracepoint_error): Update atomically in the IPA. (clear_inferior_trace_buffer): New. (about_to_request_buffer_space): New. (trace_buffer_alloc): Handle GDBserver and inferior simulatenous updating the same buffer. (add_tracepoint): Default the tracepoint's type to trap tracepoint, and orig_size to -1. (get_trace_state_variable) [IN_PROCESS_AGENT]: Handle allocated internal variables. (create_trace_state_variable): New parameter `gdb'. Handle it. (clear_installed_tracepoints): Clear fast tracepoint jumps. (cmd_qtdp): Handle fast tracepoints. (cmd_qtdv): Adjust. (max_jump_pad_size): New. (gdb_jump_pad_head): New. (get_jump_space_head): New. (claim_jump_space): New. (sort_tracepoints): New. (MAX_JUMP_SIZE): New. (cmd_qtstart): Handle fast tracepoints. Sync tracepoints with the IPA. (stop_tracing) [IN_PROCESS_AGENT]: Don't include the tdisconnected support. Upload fast traceframes, and delete internal IPA breakpoints. (stop_tracing_handler): New. (flush_trace_buffer_handler): New. (cmd_qtstop): Upload fast tracepoints. (response_tracepoint): Handle fast tracepoints. (tracepoint_finished_step): Upload fast traceframes. Set the tracepoint hit context's tracepoint type. (handle_tracepoint_bkpts): New. (tracepoint_was_hit): Set the tracepoint hit context's tracepoint type. Add comment about fast tracepoints. (collect_data_at_tracepoint) [IN_PROCESS_AGENT]: Don't access the non-existing action_str field. (get_context_regcache): Handle fast tracepoints. (do_action_at_tracepoint) [!IN_PROCESS_AGENT]: Don't write the PC to the regcache. (fast_tracepoint_from_jump_pad_address): New. (fast_tracepoint_from_ipa_tpoint_address): New. (collecting_t): New. (force_unlock_trace_buffer): New. (fast_tracepoint_collecting): New. (collecting): New. (gdb_collect): New. (write_inferior_data_ptr): New. (target_tp_heap): New. (target_malloc): New. (download_agent_expr): New. (UALIGN): New. (download_tracepoints): New. (download_trace_state_variables): New. (upload_fast_traceframes): New. (IPA_FIRST_TRACEFRAME): New. (IPA_NEXT_TRACEFRAME_1): New. (IPA_NEXT_TRACEFRAME): New. [IN_PROCESS_AGENT]: Include sys/mman.h and fcntl.h. [IN_PROCESS_AGENT] (gdb_tp_heap_buffer, gdb_jump_pad_buffer) (gdb_jump_pad_buffer_end): New. [IN_PROCESS_AGENT] (initialize_tracepoint_ftlib): New. (initialize_tracepoint): Adjust. [IN_PROCESS_AGENT]: Allocate the IPA heap, and jump pad scratch buffer. Initialize the low module. * utils.c (PREFIX, TOOLNAME): New. (malloc_failure): Use PREFIX. (error): In the IPA, an error causes an exit. (fatal, warning): Use PREFIX. (internal_error): Use TOOLNAME. (NUMCELLS): Increase to 10. * configure, config.in: Regenerate. gdb/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> * NEWS: Mention gdbserver fast tracepoints support. gdb/doc/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> * gdb.texinfo (Set Tracepoints): Mention tracepoints support in gdbserver, and add cross reference. (Tracepoints support in gdbserver): New subsection.
2010-05-26gdb/Pedro Alves2-2/+61
2010-05-26 Pedro Alves <pedro@codesourcery.com> * NEWS: Mention the `qRelocInsn' feature. * gdbarch.sh (relocate_instruction): New. * amd64-tdep.c (rip_relative_offset): New. (append_insns): New. (amd64_relocate_instruction): New. (amd64_init_abi): Install it. * i386-tdep.c (append_insns): New. (i386_relocate_instruction): New. (i386_gdbarch_init): Install it. * remote.c (remote_get_noisy_reply): Handle qRelocInsn requests. * gdbarch.h, gdbarch.c: Regenerate. gdb/doc/ 2010-05-26 Pedro Alves <pedro@codesourcery.com> * gdb.texinfo (General Query Packets) <qSupported>: Describe the `qRelocInsn' feature. (Relocate instruction reply packet): New subsection of `Tracepoint Packets'. (Tracepoint Packets): Mention that packets QTDP and QTStart support the qRelocInsn request, and add cross reference to new subsection.
2010-05-25 Add python gdb.GdbError and gdb.string_to_argv.Doug Evans2-0/+43
* NEWS: Document them. * python/py-cmd.c (cmdpy_function): Don't print a traceback if the exception is gdb.GdbError. Print a second traceback if there's an error computing the error message. (gdbpy_string_to_argv): New function. * python/py-utils.c (gdbpy_obj_to_string): New function. (gdbpy_exception_to_string): New function. * python/python-internal.h (gdbpy_string_to_argv): Declare. (gdbpy_obj_to_string, gdbpy_exception_to_string): Declare. (gdbpy_gdberror_exc): Declare. * python/python.c (gdbpy_gdberror_exc): New global. (_initialize_python): Initialize gdbpy_gdberror_exc and create gdb.GdbError. (GdbMethods): Add string_to_argv. doc/ * gdb.texinfo (Exception Handling): Document gdb.GdbError. (Commands In Python): Document gdb.string_to_argv. testsuite/ * gdb.python/py-cmd.exp: Add tests for gdb.GdbError and gdb.string_to_argv.
2010-05-02gdb/Jan Kratochvil2-16/+8
* cli/cli-cmds.h (error_no_arg): Remove. Move the comment ... * command.h (error_no_arg): ... here. Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN. * defs.h (NORETURN, ATTR_NORETURN): Remove. (perror_with_name, verror, error, error_stream, vfatal, fatal) (internal_verror, internal_error, nomem): Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN. * exceptions.c (throw_exception, deprecated_throw_reason, throw_verror) (throw_vfatal, throw_error): Remove NORETURN. (throw_it): Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN. * exceptions.h (throw_exception, throw_verror, throw_vfatal) (throw_error, deprecated_throw_reason): Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN. * linespec.c (cplusplus_error): Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN for prototype, for the definition only remove NORETURN. * remote-mips.c (mips_error): Change NORETURN to ATTRIBUTE_NORETURN. * remote-sim.c (gdb_os_error): Change ATTR_NORETURN to ATTRIBUTE_NORETURN. * target.c (tcomplain): Likewise. * target.h (noprocess): Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN. * utils.c (verror, error, vfatal, fatal, error_stream, internal_verror) (internal_error, perror_with_name, nomem): Remove NORETURN. * xml-support.h (gdb_xml_error): Change ATTR_NORETURN to ATTRIBUTE_NORETURN. gdb/doc/ * gdbint.texinfo (Host Definition): Remove items NORETURN and ATTR_NORETURN.
2010-04-292010-04-29 Phil Muldoon <pmuldoon@redhat.com>Phil Muldoon2-0/+153
Tom Tromey <tromey@redhat.com> Thiago Jung Bauermann <bauerman@br.ibm.com> * Makefile.in (SUBDIR_PYTHON_OBS): Add py-parameter. (SUBDIR_PYTHON_SRCS): Likewise. (py-parameter.o): New rule. * python/py-parameter.c: New file. * python/python-internal.h (gdbpy_initialize_parameter) (gdbpy_parameter, gdbpy_parameter_value) (gdbpy_parse_command_name): Declare. * python/py-cmd.c (parse_command_name): Rename to gdbpy_parse_command_name. (gdbpy_parse_command_name): Accept a starting list parameter and use over cmdlist. (cmdpy_init): Use gdbpy_parse_command_name. * python/python.c (parameter_to_python): Rename to gdbpy_parameter_to_python. Accept enum var_types and value. (gdbpy_parameter): Use gdbpy_parameter_value. (_initialize_python): Call gdbpy_initialize_parameters. 2010-04-29 Phil Muldoon <pmuldoon@redhat.com> * gdb.python/py-param.exp: New File. 2010-04-29 Phil Muldoon <pmuldoon@redhat.com> Tom Tromey <tromey@redhat.com> Thiago Jung Bauermann <bauerman@br.ibm.com> * gdb.texinfo (Parameters In Python): New Node.
2010-04-29D language support.Joel Brobecker2-1/+22
gdb/ChangeLog: D language support. * Makefile.in (SFILES): Add d-lang.c d-valprint.c. (COMMON_OBS): Add d-lang.o d-valprint.o. (HFILES_NO_SRCDIR): Add d-lang.h. * NEWS: Mention D language support. * c-lang.c (c_emit_char, exp_descriptor_c): Make public. * c-lang.h (c_emit_char, exp_descriptor_c): Add declaration. * d-lang.c: New file. * d-lang.h: New file. * d-valprint.c: New file. * defs.h (enum language): Add language_d. * dwarf2read.c (set_cu_language): Add DW_LANG_D. * language.c (binop_result_type, integral_type, character_type) (string_type, boolean_type, structured_type): Add language_d. * symfile.c (init_filename_language_table): Add language_d. * symtab.c: Include d-lang.h. (symbol_init_language_specific, symbol_find_demangled_name) (symbol_natural_name, lookup_symbol_in_language) (symbol_demangled_name, symbol_matches_domain): Add language_d. gdb/doc/ChangeLog: * gdb.texinfo: (Summary) Add mention about D language support. (Filenames): Add D suffixes. (D): New node. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Fix "set language" test.
2010-04-26 PR breakpoints/11531.Pierre Muller2-5/+5
* config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS): Remove macro definition and related comment. * infrun.c (CANNOT_STEP_HW_WATCHPOINTS): Remove macro. (resume): Remove code and comment related to this macro. doc ChangeLog entry: * gdbint.texinfo (CANNOT_STEP_HW_WATCHPOINTS): Remove explanation of macro deleted from GDB code.
2010-04-24 * defs.h: Adjust comment.Pedro Alves2-0/+108
* filesystem.h, filesystem.c: New files. * Makefile.in (SFILES): Add filesystem.c. (COMMON_OBS): Add filesystem.o. * solib.c (solib_find): Handle DOS-based filesystems. Handle different target and host path flavours. * arm-symbian-tdep.c (arm_symbian_init_abi): Set has_dos_based_file_system on the gdbarch. * arm-wince-tdep.c (arm_wince_init_abi): Ditto. * i386-cygwin-tdep.c (i386_cygwin_init_abi): Ditto. * i386-tdep.c (i386_go32_init_abi): Ditto. * gdbarch.sh (has_dos_based_file_system): New. * gdbarch.h, gdbarch.c: Regenerate. * NEWS: Mention improved support for remote targets with DOS-based filesystems. Mention new `set/show target-file-system-kind' commands. gdb/doc/ * gdb.texinfo (Commands to specify files): Describe what how GDB looks up DOS-based filesystem paths on the system root. Document the new `set/show target-file-system-kind' commands.
2010-04-23 Add support for auto-loading scripts from .debug_gdb_scripts section.Doug Evans1-0/+7
* NEWS: Add entry for .debug_gdb_scripts. * Makefile.in SUBDIR_PYTHON_OBS): Add py-auto-load.o. (SUBDIR_PYTHON_SRCS): Add py-auto-load.c. (py-auto-load.o): New rule. * cli/cli-cmds.c (find_and_open_script): Make externally visible. * cli/cli-cmds.h (find_and_open_script): Update prototype. * python/py-auto-load.c: New file. * python/python-internal.h: #include <stdio.h>. (set_python_list, show_python_list): Declare. (gdbpy_initialize_auto_load): Declare. (source_python_script_for_objfile): Declare. * python/python.c: Remove #include of observer.h. (gdbpy_auto_load): Moved to py-auto-load.c. (GDBPY_AUTO_FILENAME): Ditto. (gdbpy_new_objfile): Delete. (source_python_script_for_objfile): New function. (set_python_list, show_python_list): Make externally visible. (_initialize_python): Move "auto-load" command to py-auto-load.c and observer_attach_new_objfile to py-auto-load.c. doc/ * gdb.texinfo (Python): Move Auto-loading section here ... (Python API): from here. (Auto-loading): Add docs for .debug_gdb_scripts auto-loaded scripts. (Maintenance Commands): Add docs for "maint print section-scripts". testsuite/ * gdb.python/py-section-script.c: New file. * gdb.python/py-section-script.exp: New file. * gdb.python/py-section-script.py: New file.
2010-04-23 Add support for auto-loading scripts from .debug_gdb_scripts section.Doug Evans1-48/+167
* NEWS: Add entry for .debug_gdb_scripts. * Makefile.in SUBDIR_PYTHON_OBS): Add py-auto-load.o. (SUBDIR_PYTHON_SRCS): Add py-auto-load.c. (py-auto-load.o): New rule. * cli/cli-cmds.c (find_and_open_script): Make externally visible. * cli/cli-cmds.h (find_and_open_script): Update prototype. * python/py-auto-load.c: New file. * python/python-internal.h: #include <stdio.h>. (set_python_list, show_python_list): Declare. (gdbpy_initialize_auto_load): Declare. (source_python_script_for_objfile): Declare. * python/python.c: Remove #include of observer.h. (gdbpy_auto_load): Moved to py-auto-load.c. (GDBPY_AUTO_FILENAME): Ditto. (gdbpy_new_objfile): Delete. (source_python_script_for_objfile): New function. (set_python_list, show_python_list): Make externally visible. (_initialize_python): Move "auto-load" command to py-auto-load.c and observer_attach_new_objfile to py-auto-load.c. doc/ * gdb.texinfo (Python): Move Auto-loading section here ... (Python API): from here. (Auto-loading): Add docs for .debug_gdb_scripts auto-loaded scripts. (Maintenance Commands): Add docs for "maint print section-scripts". testsuite/ * gdb.python/py-section-script.c: New file. * gdb.python/py-section-script.exp: New file. * gdb.python/py-section-script.py: New file.
2010-04-23PR 10179Chris Moller3-2/+23
* symtab.c (rbreak_command): Added code to include a filename specification in the rbreak argument. * NEWS: Added a brief description of filename-qualified rbreak. * gdb.base/Makefile.in (EXECUTABLES): Added pr10179. * gdb.base/pr10179-a.c: * gdb.base/pr10179-b.c: * gdb.base/pr10179.exp: New files. * gdb.texinfo (Setting Breakpoints): Added description of filename-qualified rbreak. * refcard.tex (Breakpoints and Watchpoints): Added brief description of filename-qualified rbreak.
2010-04-22gdb/doc/Jan Kratochvil2-39/+60
* gdb.texinfo (Data): New @menu reference to Pretty Printing. (Python API): Change the reference to Pretty Printing API. (Pretty Printing): Move the user part under the Data node. Reformat the sample output to 72 columns. Create a new reference to Pretty Printing API. Rename the API part ... (Pretty Printing API): To a new node name. (Selecting Pretty-Printers, Progspaces In Python, Objfiles In Python) (GDB/MI Variable Objects): Change references to Pretty Printing API.
2010-04-222010-04-21 Stan Shebs <stan@codesourcery.com>Stan Shebs2-13/+17
* gdb.texinfo (Tracepoint Actions): Mention synonymy of actions and commands. (Listing Tracepoints): Update to reflect current behavior.
2010-04-21gdb ChangeLogPierre Muller2-2/+15
* gdbtypes.h (builtin_type): Add builtin_char16 and builtin_char32 fields. * gdbtypes.c (gdbtypes_post_init): Set builtin_char16 and builtin_char32 fields. * printcmd.c (decode_format): Set char size to '\0' for strings unless explicit size is given. (print_formatted): Correct calculation of NEXT_ADDRESS for 16 or 32 bit strings. (do_examine): Do not force byte size for strings. Use builtin_char16 and builtin_char32 types to display 16 or 32 bit-wide strings. (x_command): Set LAST_SIZE to 'b' for string type. gdb/doc ChangeLog * gdb.texinfo (Examining memory): Update for change in string display with explicit size. gdb/testsuite ChangeLog * gdb.base/charset.c (Strin16, String32): New variables. * gdb.base/charset.exp (gdb_test): Test correct display of 16 or 32 bit strings.
2010-04-19Fix format of previous-previous entry.Pedro Alves1-1/+1
2010-04-19 PR breakpoints/8554.Pedro Alves2-4/+41
Implement `save-breakpoints'. gdb/ * breakpoint.c (save_cmdlist): New. (breakpoint_set_cmdlist, breakpoint_show_cmdlist): Moved up close to save_cmdlist. (print_recreate_catch_fork): New. (catch_fork_breakpoint_ops): Install it. (print_recreate_catch_vfork): New. (catch_vfork_breakpoint_ops): Install it. (print_recreate_catch_syscall): New. (catch_syscall_breakpoint_ops): Install it. (print_recreate_catch_exec): New. (catch_exec_breakpoint_ops): Install it. (print_recreate_exception_catchpoint): New. (gnu_v3_exception_catchpoint_ops): Install it. (save_breakpoints): New, based on tracepoint_save_command, but handle all breakpoint types. (save_breakpoints_command): New. (tracepoint_save_command): Rename to... (save_tracepoints_command): ... this, and reimplement using save_breakpoints. (save_command): New. (_initialize_breakpoints): Install the "save" command prefix. Install the "save breakpoints" command. Make "save-tracepoints" a deprecated alias for "save tracepoints". * breakpoint.h (struct breakpoint_ops): New field `print_recreate'. * ada-lang.c (print_recreate_exception): New. (print_recreate_catch_exception): New. (catch_exception_breakpoint_ops): Install it. (print_recreate_catch_exception_unhandled): New. (catch_exception_unhandled_breakpoint_ops): Install it. (print_recreate_catch_assert): New. (catch_assert_breakpoint_ops): Install it. * NEWS: Mention the new `save breakpoints' command. Mention the new `save tracepoints' alias and that `save-tracepoints' is now deprecated. gdb/doc/ * gdb.texinfo (Save Breakpoints): New node. (save-tracepoints): Rename to ... (save tracepoints): ... this. Mention that `save-tracepoints' is a deprecated alias to `save tracepoints'. gdb/testsuite/ * gdb.trace/save-trace.exp: Adjust.
2010-04-16 Support for Windows OS Thread Information Block.Pierre Muller2-0/+54
* NEWS: Document new feature. * remote.c (PACKET_qGetTIBAddr): New enum element. (remote_get_tib_address): New function. (init_remote_ops): Set to_get_tib_address field to remote_get_tib_address. (_initialize_remote): Add add_packet_config_cmd for PACKET_qGetTIBAddr. * target.c (update_current_target): Set default value for new to_get_tib_address field. * target.h (target_ops): New field to_get_tib_address. (target_get_tib_address): New macro. * windows-nat.c (thread_info): Add thread_local_base field. (windows_add_thread): Add tlb argument of type 'void *'. (fake_create_process): Adapt windows_add_thread call. (get_windows_debug_event): Idem. (windows_get_tib_address): New function. (init_windows_ops): Set to_get_tib_address field to remote_get_tib_address. (_initialize_windows_nat): Replace info_w32_cmdlist initialization by a call to init_w32_command_list. (info_w32_command, info_w32_cmdlist): Removed from here... to windows-tdep.c file. * windows-tdep.h (info_w32_cmdlist): Declare. (init_w32_command_list): New external function declaration. * windows-tdep.c: Add several headers. (info_w32_cmdlist): to here, made global. (thread_information_32): New struct. (thread_information_64): New struct. (TIB_NAME): New char array. (MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants. (maint_display_all_tib): New static variable. (windows_get_tlb_type): New function. (tlb_value_read, tlb_value_write): New functions. (tlb_value_funcs): New static struct. (tlb_make_value): New function. (display_one_tib): New function. (display_tib): New function. (show_maint_show_all_tib):New function. (info_w32_command): Moved from windows-nat.c. (init_w32_command_list): New function. (_initialize_windows_tdep): New function. New "maint set/show show-all-tib" command New "$_tlb" internal variable. gdbserver/ChangeLog entry: * server.c (handle_query): Handle 'qGetTIBAddr' query. * target.h (target_ops): New get_tib_address field. * win32-low.h (win32_thread_info): Add thread_local_base field. * win32-low.c (child_add_thread): Add tlb argument. Set thread_local_base field to TLB. (get_child_debug_event): Adapt to child_add_thread change. (win32_get_tib_address): New function. (win32_target_ops): Set get_tib_address field to win32_get_tib_address. * linux-low.c (linux_target_ops): Set get_tib_address field to NULL. doc/ChangeLog entry: gdb.texinfo ($_tlb): Document new automatic convinience variable. (info w32 thread-information-block): Document new command. (qGetTIBAddress): Document new gdbserver query. (maint set/show show-all-tib): Document new command.
2010-04-15 * NEWS: Add entry for python program space support.Doug Evans2-2/+56
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-progspace.o. (SUBDIR_PYTHON_SRCS): Add py-progspace.c. (py-progspace.o): New rule. * python/py-prettyprint.c (find_pretty_printer_from_objfiles): New function. (find_pretty_printer_from_progspace): New function. (find_pretty_printer_from_gdb): New function. (find_pretty_printer): Rewrite. * python/py-progspace.c: New file. * python/python-internal.h (program_space): Add forward decl. (pspace_to_pspace_object, pspy_get_printers): Declare. (gdbpy_initialize_pspace): Declare. * python/python.c: #include "progspace.h". (gdbpy_get_current_progspace, gdbpy_progspaces): New functions. (_initialize_python): Call gdbpy_initialize_pspace. (GdbMethods): Add current_progspace, progspaces. doc/ * gdb.texinfo (Python API): Add progspaces section. (Selecting Pretty-Printers): Progspace pretty-printers are searched too. (Progspaces In Python): New section. testsuite/ * gdb.python/py-progspace.c: New file. * gdb.python/py-progspace.exp: New file.
2010-04-15 Add -s option to source command.Doug Evans2-1/+20
* NEWS: Document new option. * cli/cli-cmds.c (find_and_open_script): Add function comment. Delete from_tty and cleanupp args. Split filep arg into file and full_pathp. New arg search_path. (source_script_from_stream): New function. (source_script_with_search): New function. (source_script): Rewrite. (source_command): Parse "-s" option. (init_cli_cmds): Add "-s" docs to source command help, and reformat. * python/python.c (source_python_script): Make file arg a const char *. Don't call fclose, leave for caller. * python/python.h (source_python_script): Update. testsuite/ * gdb.base/source-test.gdb: New file. * gdb.base/source.exp: Add tests for "source -s". doc/ * gdb.texinfo (Command Files): Add docs for new "source -s" option.
2010-04-142010-04-14 Phil Muldoon <pmuldoon@redhat.com>Phil Muldoon2-0/+8
PR python/11381 * python/py-prettyprint.c (pretty_print_one_value): Test for Py_None. (print_string_repr): Test for Py_None. Set flags accordingly. Return value depending on return type. (print_children): Take a value indicating whether data was printed before this function was called. Alter output accordingly. (apply_val_pretty_printer): Capture return value from print_string_repr and pass to print_children. 2010-04-14 Phil Muldoon <pmuldoon@redhat.com> * gdb.python/py-prettyprint.py (NoStringContainerPrinter): New printer. * gdb.python/py-prettyprint.c: Add justchildren struct, typedefs. * gdb.python/py-prettyprint.exp: New test for to_string returning None. * gdb.python/py-mi.exp: New test for to_string returning None. 2010-04-14 Phil Muldoon <pmuldoon@redhat.com> * gdb.texinfo (Pretty Printing): Document behaviour when to_string returns None.
2010-04-092010-04-09 Stan Shebs <stan@codesourcery.com>Stan Shebs2-3/+11
* tracepoint.c (trace_status_mi): Report frames created. * gdb.texinfo (gdb/mi Tracepoint Commands) <-trace-status>: Describe the `frames-created' field, tweak grammar.
2010-04-09 gdb/Pedro Alves2-1/+17
* tracepoint.c (trace_status_mi): Report disconnected tracing and circular trace buffer statuses. gdb/doc/ * gdb.texinfo (gdb/mi Tracepoint Commands) <-trace-status>: Describe the `circular' and `disconnected' fields.
2010-04-09Mention unavailable and invisible registers.H.J. Lu2-3/+9
2010-04-09 H.J. Lu <hongjiu.lu@intel.com> * gdb.texinfo (maint print registers): Mention unavailable and invisible registers.
2010-04-092010-04-09 Phil Muldoon <pmuldoon@redhat.com>Phil Muldoon2-0/+170
Thiago Jung Bauermann <bauerman@br.ibm.com> Tom Tromey <tromey@redhat.com> * breakpoint.c (condition_command): Simplify. Move condition setting code to ... (set_breakpoint_condition): ... here. New function. * breakpoint.h (set_breakpoint_condition): Declare. * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpoint. (SUBDIR_PYTHON_SRCS): Likewise. (py-breakpoint.o): New rule. * python/py-breakpoint.c: New file. * python/python-internal.h (gdbpy_breakpoints) (gdbpy_initialize_breakpoints): Declare. (GDB_PY_SET_HANDLE_EXCEPTION) Define. 2010-04-09 Phil Muldoon <pmuldoon@redhat.com> * gdb.python/py-breakpoint.exp: New File. * gdb.python/py-breakpoint.C: Ditto. 2010-04-09 Phil Muldoon <pmuldoon@redhat.com> Thiago Jung Bauermann <bauerman@br.ibm.com> Tom Tromey <tromey@redhat.com> * gdb.texinfo (Breakpoints In Python): New Node.
2010-04-092010-04-08 Stan Shebs <stan@codesourcery.com>Stan Shebs2-4/+21
Pedro Alves <pedro@codesourcery.com> * tracepoint.h (struct trace_status): New fields disconnected_tracing and circular_buffer. (disconnect_tracing): Rename from disconnect_or_stop_tracing. * tracepoint.c (trace_status_command): Display target's status for disconnected tracing and circular buffer. (disconnect_tracing): Rename from disconnect_or_stop_tracing, add query for non-disconnected-tracing case, remove the stop_tracing call. (tfile_open): Clear disconnected and circular buffer status. (trace_save): Save disconnected and circular buffer status. (parse_trace_status): Parse disconnected and circular buffer status, also recognize disconnected as a stop reason. * remote.c (remote_set_disconnected_tracing): Only set QTDisconnected if the remote end supports disconnected tracing. Warn otherwise, if trying to enable disconnected tracing. * infcmd.c (detach_command): Update disconnect_tracing call. * cli/cli-cmds.c (quit_command): Ditto. * gdb.texinfo (Tracepoint Packets): Describe disconn and circular trace status fields.
2010-04-08Support i386 without SSE.H.J. Lu2-2/+9
gdb/ 2010-04-08 H.J. Lu <hongjiu.lu@intel.com> * i386-linux-nat.c (have_ptrace_getfpxregs): Initialize to -1 if HAVE_PTRACE_GETFPXREGS is defined. (i386_linux_read_description): Set have_ptrace_getfpxregs and have_ptrace_getregset to 0 if ptrace PTRACE_GETFPXREGS failed. * i386-linux-tdep.c: Include "features/i386/i386-mmx-linux.c" (i386_linux_core_read_description): Return tdesc_i386_mmx_linux if .reg-xfp section doesn't exist. (_initialize_i386_linux_tdep): Call initialize_tdesc_i386_mmx_linux. * i386-linux-tdep.h (tdesc_i386_mmx_linux): New. * i386-tdep.c: Include "features/i386/i386-mmx.c". (i386_go32_init_abi): Set tdesc to tdesc_i386_mmx. (i386_validate_tdesc_p): Make org.gnu.gdb.i386.sse optional. Set xcr0 to I386_XSTATE_X87_MASK if SSE isn't available. (i386_gdbarch_init): Update comments. (_initialize_i386_tdep): Call initialize_tdesc_i386_mmx. * common/i386-xstate.h (I386_XSTATE_X87_MASK): New. * config/djgpp/fnchange.lst: Add i386 MMX XML files. * features/Makefile (i386/i386-mmx-expedite): New. (i386/i386-mmx-linux-expedite): Likewise. ($(outdir)/i386/i386-mmx.dat): Likewise. ($(outdir)/i386/i386-mmx-linux.dat): Likewise. * features/i386/i386-mmx-linux.c: New. * features/i386/i386-mmx-linux.xml: Likewise. * features/i386/i386-mmx.c: Likewise. * features/i386/i386-mmx.xml: Likewise. * regformats/i386/i386-mmx-linux.dat: Likewise. * regformats/i386/i386-mmx.dat: Likewise. * features/Makefile (WHICH): Add i386/i386-mmx and i386/i386-mmx-linux. gdb/doc/ 2010-04-08 H.J. Lu <hongjiu.lu@intel.com> * gdb.texinfo (i386 Features): Make org.gnu.gdb.i386.avx optional. Make org.gnu.gdb.i386.avx requires org.gnu.gdb.i386.avx. gdb/gdbserver/ 2010-04-08 H.J. Lu <hongjiu.lu@intel.com> * Makefile.in (clean): Also remove i386-mmx.c i386-mmx-linux.c. (i386-mmx.o): New. (i386-mmx.c): Likewise. (i386-mmx-linux.o): Likewise. (i386-mmx-linux.c): Likewise. * configure.srv (srv_i386_regobj): Add i386-mmx.o. (srv_i386_linux_regobj): Add i386-mmx-linux.o. (srv_i386_xmlfiles): Add i386/i386-mmx.xml. (srv_i386_linux_xmlfiles): Add i386/i386-mmx-linux.xml. * linux-x86-low.c (init_registers_i386_mmx_linux): New. (x86_linux_update_xmltarget): Call init_registers_i386_mmx_linux and return if ptrace PTRACE_GETFPXREGS failed in 32bit.
2010-04-08 * source.c (openp): Skip $cdir in PATH.Doug Evans2-2/+12
doc/ * gdb.texinfo (Command Files): Document that gdb skips $cdir in search path, and document that gdb only scans the search path if the script's path doesn't specify a directory.
2010-04-05 * gdb.texinfo (maint show python auto-load): Fix typo.Doug Evans2-2/+6
2010-04-042010-04-04 Stan Shebs <stan@codesourcery.com>Stan Shebs2-7/+10
Nathan Sidwell <nathan@codesourcery.com> * breakpoint.c (breakpoint_1): Add filter argument, return number of breakpoints printed. (is_hardware_watchpoint): Make argument const. (is_watchpoint): Ditto. (is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint, use it everywhere. (breakpoints_info): Pass NULL to breakpoint_1. (maintenance_info_breakpoints): Ditto. (watchpoints_info): New function. (tracepoints_info): Use breakpoint_1 filter. (set_ignore_count): Warn that tracepoint ignore count will be ignored. (_initialize_breakpoint): Make "info watchpoints" its own command. * breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint. * mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint. * gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym. (Setting Watchpoints): Update description of "info watch". (Disabling Breakpoints): Only "info break" lists all. * gdb.base/completion.exp: Update for new "info watchpoints". * gdb.base/default.exp: Ditto. * gdb.base/help.exp: Ditto. * gdb.base/watchpoint.exp: Ditto. * gdb.trace/infotrace.exp: Update "info tracpoints" output.
2010-04-042010-04-04 Stan Shebs <stan@codesourcery.com>Stan Shebs2-0/+31
* tracepoint.c (tfile_fetch_registers): Add fallback case. * gdb.texinfo (Tracepoint Restrictions): Document PC inference. (tdump): Explain how tdump works. * gdb.trace/tfile.exp: Sharpen tfind test.
2010-04-01 gdb/Pedro Alves2-2/+8
* breakpoint.c (multi_start, multi_end, last_was_multi): Delete. (prev_breakpoint_count): New. (set_breakpoint_count): Adjust. (rbreak_start_breakpoint_count): New. (start_rbreak_breakpoints): Adjust. (end_rbreak_breakpoints): Adjust. (struct commands_info) <arg>: New field. (do_map_commands_command): Tweak output to include breakpoint spec range. (commands_command_1): Adjust. Avoid setting an xfree cleanup if ARG was empty on entry. Set INFO's arg. (create_breakpoint): Adjust. * NEWS: Clarify `commands' changes. gdb/doc/ * gdb.texinfo (Break Commands): Clarify `commands' changes, and add cross reference. gdb/testsuite/ * gdb.base/commands.exp: Adjust. * gdb.cp/extern-c.exp: Adjust.
generated by cgit v1.1 at 2025-02-09 19:54:32 +0000