aboutsummaryrefslogtreecommitdiff
path: root/gdb/doc
AgeCommit message (Collapse)AuthorFilesLines
2010-02-24 Multiexec MIVladimir Prus3-17/+108
* breakpoint.c (clear_syscall_counts): Take struct inferior*. * inferior.c (add_inferior_silent): Notify inferior_added observer. (delete_inferior_1): Notify inferior_removed observer. (exit_inferior_1): Pass inferior, not pid, to observer. (inferior_appeared): Likewise. (add_inferior_with_spaces): New. (add_inferior_command): Use the above. * inferior.h (delete_inferior_1, add_inferior_with_spaces): Declare. * inflow.c (inflow_inferior_exit): Likewise. * jit.c (jit_inferior_exit_hook): Likewise. * mi/mi-cmds.c (mi_cmds): Register add-inferior and remove-inferior. * mi/mi-cmds.h (mi_cmd_add_inferior, mi_cmd_remove_inferior): New. * mi/mi-interp.c (mi_inferior_added, mi_inferior_removed): New. (report_initial_inferior): New. (mi_inferior_removed): Register the above. Make sure inferior_added observer is called on the first inferior. (mi_new_thread, mi_thread_exit): Thread group is now identified by inferior number, not pid. (mi_solib_loaded, mi_solib_unloaded): Report which inferiors are affected. * mi/mi-main.c (current_context): New. (proceed_thread_callback): Use typed closure. Proceed everything if pid is 0. Most implementation split into (proceed_thread): ... this. (run_one_inferior): New. (mi_cmd_exec_continue, mi_cmd_exec_interrupt, mi_cmd_exec_run): Adjust for multiexec behaviour. (mi_cmd_add_inferior, mi_cmd_remove_inferior): New. (mi_cmd_execute): Handle the 'thread-group' option here. Do some extra checks. * mi-parse.c (mi_parse): Handle the --all and --thread-group options. * mi-parse.h (struct mi_parse): New fields all and thread_group.
2010-02-19 * gdbint.texinfo (Getting Started): Fix @node.Tom Tromey2-2/+7
(Debugging GDB): Likewise.
2010-02-13Document new gdb_test_timeout global variable.Joel Brobecker2-0/+37
* gdbint.texinfo (Testsuite): New section "Testsuite Configuration", documenting the gdb_test_timeout variable.
2010-02-122010-02-12 Jakob Engblom <jakob@virtutech.com>Michael Snyder2-24/+60
* gdb.texinfo (MI commands): Added documentation of --reverse option to a set of MI commands. Restructured documentation of MI commands --exec-continue to reflect the complexity of reverse execution.
2010-02-12 gdb/doc/Pedro Alves2-4/+13
* gdb.texinfo (Using the Collected Data): Specify that the address range of `tfind outsize' is exclusive, and that the address range of `tfind range' is inclusive. (Tracepoint Packets): Specify that the address range of `QTFrame:range' is inclusive, and that the address range of `QTFrame:outside' is exclusive gdb/ * tracepoint.c (_initialize_tracepoint): Specify that the address range of `tfind outsize' is exclusive, and that the address range of `tfind range' is inclusive, in the commands' help strings.
2010-02-12 * gdb.texinfo (GDB/MI Result Records): Clarify ^running.Vladimir Prus2-3/+10
2010-02-10gdbTom Tromey2-0/+14
* parser-defs.h (parser_debug): Declare. * parse.c (_initialize_parse): Install "debug parser" set/show command. (parser_debug): New global. (show_parserdebug): New function. * c-exp.y (c_parse): Set yydebug. gdb/testsuite * gdb.texinfo (Debugging Output): Document set debug parser and show debug parser.
2010-02-09Document i387_ext, i386_eflags and i386_mxcsr.H.J. Lu2-0/+14
2010-02-09 H.J. Lu <hongjiu.lu@intel.com> * gdb.texinfo (Predefined Target Types): Add i387_ext, i386_eflags and i386_mxcsr.
2010-02-08Document i386 XML target features.H.J. Lu2-0/+44
2010-02-08 H.J. Lu <hongjiu.lu@intel.com> * gdb.texinfo: Document i386 target features.
2010-02-05 testsuite/Doug Evans2-0/+28
* lib/gdb.exp (INTERNAL_GDBFLAGS): Don't override value provided by user. doc/ * gdbint.texinfo (Testsuite): Document INTERNAL_GDBFLAGS.
2010-02-05 * gdbint.texinfo (Testsuite): Add a new section to document theDoug Evans2-0/+51
various DejaGnu variables that may be overridden.
2010-02-04 PR cli/8830:Tom Tromey2-2/+8
* gdb.texinfo (Files): -readnow comes before the filename for file and symbol-file.
2010-02-01 * arch-utils.c (default_remote_breakpoint_from_pc): New function.Daniel Jacobowitz2-26/+65
* arch-utils.h (default_remote_breakpoint_from_pc): Declare. * gdbarch.c, gdbarch.h: Regenerated. * gdbarch.sh (remote_breakpoint_from_pc): New architecture method. * remote.c (remote_insert_breakpoint, remote_insert_hw_breakpoint): Use gdbarch_remote_breakpoint_from_pc. doc/ * gdb.texinfo (Architecture-Specific Protocol Details): New section. Document ARM breakpoint types. (Register Packet Format): Move into the new section. (Packets): Describe the KIND argument for Z0, z0, Z1, and z1 packets.
2010-01-21Improve doc on how to execute a Python script from GDB.Joel Brobecker2-10/+93
* gdb.texinfo (File Options): Adjust the documentation of this switch to refer to the "source" command rather than partially duplicating some of the relevant information. (Extending GDB): Introduce and document the set/show script-extension setting. (Command Files): Add note explaining that the "source" command is also used to evalute scripts written in other languages. Remove the short slightly incorrect reference to sourcing Python scripts. (Python Commands): Document how to execute a Python script from GDB.
2010-01-19Fix typo in GDB documentation.Joel Brobecker2-1/+5
* gdb.texinfo (Command Files): Fix typo.
2010-01-18 * gdb.texinfo (File Options): Document -x on .py files.Joel Brobecker2-2/+15
(Command Files): Document handling of Python scripts.
2010-01-18 * Makefile.in (ANNOTATE_DOC_BUILD_INCLUDES): Add GDBvn.texi.Jie Zhang2-1/+6
2010-01-15 Add trace file support.Stan Shebs2-2/+129
* tracepoint.h (enum trace_stop_reason): New enum. (struct trace_status): New struct. (parse_trace_status): Declare. (struct uploaded_tp): Move here from remote.c, add fields for actions. (struct uploaded_tsv): New struct. * tracepoint.c (tfile_ops): New target vector. (trace_fd): New global. (tfile_open): New function. (tfile_close): New function. (tfile_files_info): New function. (tfile_get_trace_status): New function. (tfile_get_traceframe_address): New function. (tfile_trace_find): New function. (tfile_fetch_registers): New function. (tfile_xfer_partial): New function. (tfile_get_trace_state_variable_value): New function. (init_tfile_ops): New function. (_initialize_tracepoint): Call it, add tfile target. (trace_status): New global. (current_trace_status): New function. (trace_running_p): Remove, change all users to get from current_trace_status()->running. (get_trace_status): Remove. (trace_status_command): Call target_get_trace_status directly, report more detail including tracing stop reasons. (trace_find_command): Always allow tfind on a file. (trace_find_pc_command): Ditto. (trace_find_tracepoint_command): Ditto. (trace_find_line_command): Ditto. (trace_find_range_command): Ditto. (trace_find_outside_command): Ditto. (trace_frames_offset, cur_offset): Declare as off_t. (trace_regblock_size): Rename from reg_size, update users. (parse_trace_status): New function. (tfile_interp_line): New function. (disconnect_or_stop_tracing): Ensure current trace status before asking what to do. (stop_reason_names): New global. (trace_save_command): New command. (get_uploaded_tp): Move here from remote.c. (find_matching_tracepoint): Ditto. (merge_uploaded_tracepoints): New function. (parse_trace_status): Use stop_reason_names. (_initialize_tracepoint): Define tsave command. * target.h (target_ops): New fields to_save_trace_data, to_upload_tracepoints, to_upload_trace_state_variables, to_get_raw_trace_data, change to_get_trace_status to take a pointer to a status struct. (target_save_trace_data): New macro. (target_upload_tracepoints): New macro. (target_upload_trace_state_variables): New macro. (target_get_raw_trace_data): New macro. * target.c (update_current_target): Add new methods, change signature of to_get_trace_status. * remote.c (hex2bin): Make globally visible. (bin2hex): Ditto. (remote_download_trace_state_variable): Download name also. (remote_get_trace_status): Update parameter, use parse_trace_status. (remote_save_trace_data): New function. (remote_upload_tracepoints): New function. (remote_upload_trace_state_variables): New function. (remote_get_raw_trace_data): New function. (remote_start_remote): Use them. (_initialize_remote_ops): Add operations. * ax-gdb.c: Include breakpoint.h. * breakpoint.c (create_tracepoint_from_upload): Use break_command_really, return tracepoint, warn about unimplemented parts. * NEWS: Mention trace file addition. * gdb.texinfo (Trace Files): New section. (Tracepoint Packets): Document QTSave and qTBuffer. (Trace File Format): New appendix. * generic/gdbtk-bp.c (gdb_trace_status): Use current_trace_status. * gdb.trace/tfile.c: New file. * gdb.trace/tfile.exp: New file.
2010-01-142010-01-13 Phil Muldoon <pmuldoon@redhat.com>Phil Muldoon2-0/+87
PR python/10705 * python/python-internal.h: Add lazy_string_object_type definition. (create_lazy_string_object, gdbpy_initialize_lazy_string) (gdbpy_is_lazystring, gdbpy_extract_lazy_string): Define. * python/py-value.c (valpy_lazy_string): New function. (convert_value_from_python): Add lazy string conversion. * python/py-prettyprint.c (pretty_print_one_value): Check if return is also a lazy string. (print_string_repr): Add lazy string printing branch. (print_children): Likewise. * python/py-lazy-string.c: New file. Implement lazy strings. * python/python.c (_initialize_python): Call gdbpy_initialize_lazy_string. * varobj.c (value_get_print_value): Add lazy string printing branch. Account for encoding. * c-lang.c (c_printstr): Account for new encoding argument. If encoding is NULL, find encoding suited for type, otherwise use user encoding. * language.h (language_defn): Add encoding argument. (LA_PRINT_STRING): Likewise. * language.c (unk_lang_printstr): Update to reflect new encoding argument to language_defn. * ada-lang.h (ada_printstr): Likewise. * c-lang.h (c_printstr): Likewise. * p-lang.h (pascal_printstr); * f-lang.c (f_printstr): Likewise. * m2-lang.c (m2_printstr): Likewise. * objc-lang.c (objc_printstr): Likewise. * p-lang.c (pascal_printstr): Likewise. * scm-lang.c (scm_printstr): Likewise. * c-valprint.c (c_val_print): Update LA_PRINT_STRING call for encoding argument. * ada-valprint.c (ada_printstr): Likewise. * f-valprint.c (f_val_print): Likewise * m2-valprint.c (m2_val_print): Likewise. * p-valprint.c (pascal_val_print): Likewise. * expprint.c (print_subexp_standard): Likewise. * valprint.c (val_print_string): Likewise. * Makefile.in (SUBDIR_PYTHON_OBS): Add py-lazy-string. (SUBDIR_PYTHON_SRCS): Likewise. (py-lazy-string.o): New rule. 2010-01-13 Phil Muldoon <pmuldoon@redhat.com> * gdb.texinfo (Values From Inferior): Document lazy_string value method. (Python API): Add Lazy strings menu item. (Lazy Strings In Python): New node. 2010-01-13 Phil Muldoon <pmuldoon@redhat.com> * gdb.python/py-value.exp (test_lazy_strings): Add lazy string test. * gdb.python/py-prettyprint.py (pp_ls): New printer. * gdb.python/py-prettyprint.exp (run_lang_tests): Add lazy string test. * gdb.python/py-prettyprint.c: Define lazystring test structure. * gdb.python/py-mi.exp: Add lazy string test.
2010-01-12 Implement core awareness.Vladimir Prus2-16/+184
* bcache.c (compare_ints): Remove (print_percentage): Use compare_positive_ints. * defs.h (compare_positive_ints): Declare. * linux-nat.h (struct lin_lwp): New field core. (linux_nat_core_of_thread_1): Declare. * linux-nat.c (add_lwp): Init the 'core' field. (linux_nat_wait_1): Record the core. (linux_nat_core_of_thread_1, linux_nat_core_of_thread): New. (linux_nat_add_target): Register the above. * linux-thread-db.c (update_thread_core): New. (thread_db_find_new_threads): Update core information for every thread. * remote.c (struct private_thread_info): New. (free_private_thread_info, demand_private_info): New. (PACKET_qXfer_threads, use_osdata_threads): New. (struct thread_item, threads_parsing_context (start_thread, end_thread, thread_attributes) (thread_children, threads_children, threads_elements): New. (remote_threads_info): Try qXfer:threads before anything else. (remote_protocol_packets): Register qXfer:threads. (remote_open_1): Init use_osdata_threads. (struct stop_reply): New field 'core'. (remote_parse_stop_reply): Parse core number. (process_stop_reply): Record core number. (remote_xfer_partial): Handle qXfer:threads. (remote_core_of_thread): New. (init_remote_ops): Register remote_core_of_thread. (_initialize_remote): Register qXfer:read. * target.c (target_core_of_thread): New * target.h (enum target_object): New value TARGET_OBJECT_THREADS. (struct target_ops): New field to_core_of_threads. (target_core_of_thread): Declare. * gdbthread.h (struct thread_info): New field private_dtor. * thread.c (print_thread_info): Report the core. * ui-out.c (MAX_UI_OUT_LEVELS): Increase. * utils.c (compare_positive_ints): New. * features/threads.dtd: New. * mi/mi-interp.c (mi_on_normal_stop): Report the core. * mi/mi-main.c (struct collect_cores_data, collect_cores) (do_nothing, free_vector_of_osdata_items) (splay_tree_int_comparator, free_splay_tree): New. (print_one_inferior_data): Implemented printing of selected inferiors. Collect and print cores. (output_cores): New. (mi_cmd_list_thread_groups): Support --recurse. Permit specifying thread groups together with --available.
2010-01-06 Support disconnected tracing.Stan Shebs2-2/+68
* infcmd.c (detach_command): Ask whether to stop tracing. * cli/cli-cmds.c (quit_command): Ditto. * breakpoint.h (struct breakpoint): New field number_on_target. * breakpoint.c (create_tracepoint_from_upload): New function. (get_tracepoint_by_number_on_target): New function. * remote.c (struct remote): New field disconnected_tracing. (remote_disconnected_tracing_feature): New function. (remote_protocol_features): Add DisconnectedTracing. (struct uploaded_tp): New struct. (uploaded_tps): New global. (get_uploaded_tp): New function. (find_matching_tracepoint): New function. (remote_get_tracing_state): New function. (remote_start_remote): Call it. * tracepoint.c (disconnected_tracing): New global. (trace_start_command): Initialize number_on_target. (stop_tracing): New function, split out from... (trace_stop_command): Call stop_tracing. (get_trace_status): New function, split out from... (trace_status_command): Call get_trace_status, add info on disconnection behavior. (disconnect_or_stop_tracing): New function. (finish_tfind_command): Translate from number on target. (trace_find_tracepoint_command): Translate to number on target. (send_disconnected_tracing_value): New function. (set_disconnected_tracing): New function. (_initialize_tracepoint): Add disconnected-tracing variable. * NEWS: Mention disconnected tracing. * gdb.texinfo (Starting and Stopping Trace Experiments): Document disconnected tracing. (Tracepoint Packets): Document new protocol.
2010-01-06 Add fast tracepoints.Stan Shebs2-7/+36
* arch-utils.h (default_fast_tracepoint_valid_at): Declare. * arch-utils.c (default_fast_tracepoint_valid_at): New function. * breakpoint.h (enum bptype): Add bp_fast_tracepoint. * breakpoint.c (tracepoint_type): New function. (ALL_TRACEPOINTS): Use it. (should_be_inserted): Ditto. (bpstat_check_location): Ditto. (print_one_breakpoint_location): Ditto. (user_settable_breakpoint): Ditto. (set_breakpoint_location_function): Ditto. (disable_breakpoints_in_shlibs): Ditto. (delete_trace_command): Ditto. (print_it_typical): Add bp_fast_tracepoint case. (bpstat_what): Ditto. (print_one_breakpoint_location): Ditto. (allocate_bp_location): Ditto. (mention): Ditto. (breakpoint_re_set_one): Ditto. (disable_command): Ditto. (enable_command): Ditto. (check_fast_tracepoint_sals): New function. (break_command_really): Call it. (ftrace_command): New function. (_initialize_breakpoint): Add ftrace command. * gdbarch.sh (fast_tracepoint_valid_at): New. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): New function. (i386_gdbarch_init): Use it. * remote.c (struct remote_state): New field fast_tracepoints. (PACKET_FastTracepoints): New packet config type. (remote_fast_tracepoint_feature): New function. (remote_protocol_features): Add FastTracepoints. (remote_supports_fast_tracepoints): New function. (_initialize_remote): Add FastTracepoints. * tracepoint.c (download_tracepoint): Add fast tracepoint option. * NEWS: Mention fast tracepoints. * gdb.texinfo (Create and Delete Tracepoints): Describe fast tracepoints. (Tracepoint Packets): Describe remote protocol for fast tracepoints. * gdb.trace/tracecmd.exp: Test ftrace.
2010-01-01 Update the "Start of New Year Procedure".Joel Brobecker2-6/+41
* gdbint.texinfo: Add the list of files that need to be updated manually. Minor reformatting.
2010-01-01 * refcard.tex: Update copyright year in header and text.Joel Brobecker2-4/+8
2010-01-01Update copyright years in all relevant texinfo documents.Joel Brobecker7-8/+18
* agentexpr.texi: Add 2010 to the list of copyright years. * annotate.texinfo: Likewise. * gdb.texinfo: Likewise. * gdbint.texinfo: Likewise. * observer.texi: Likewise. * stabs.texinfo: Likewise.
2010-01-01Update copyright year in most headers.Joel Brobecker1-1/+1
Automatic update by copyright.sh.
2009-12-31 Add new tracepoint action teval.Stan Shebs2-0/+13
* tracepoint.c (teval_pseudocommand): New function. (validate_actionline): Add teval action case. (encode_actions): Ditto. (_initialize_tracepoint): Define teval pseudocommand. * NEWS: Mention teval. * gdb.texinfo (Tracepoint Actions): Describe teval. * gdb.trace/actions.exp: Test teval action.
2009-12-30 Add default-collect variable.Stan Shebs2-0/+20
* tracepoint.c (default_collect): New global. (encode_actions): Use it. (download_tracepoint): Test it, for otherwise action-less tracepoints. (_initialize_tracepoint): Add set/show. * NEWS: Mention default-collect. * gdb.texinfo (Tracepoint Actions): Describe default-collect. * gdb.trace/actions.exp: Test default-collect.
2009-12-282009-12-28 Stan Shebs <stan@codesourcery.com>Stan Shebs3-1/+115
Add trace state variables. * ax.h (enum agent_op): Add getv, setv, and tracev. (ax_tsv): Declare. * ax-gdb.c: Include tracepoint.h. (gen_expr): Handle BINOP_ASSIGN, BINOP_ASSIGN_MODIFY, and OP_INTERNALVAR. (gen_expr_binop_rest): New function, split from gen_expr. * ax-general.c (ax_tsv): New function. (aop_map): Add new bytecodes. * tracepoint.h (struct trace_state_variable): New struct. (tsv_s): New typedef. (find_trace_state_variable): Declare. * tracepoint.c (tvariables): New global. (next_tsv_number): New global. (create_trace_state_variable): New function. (find_trace_state_variable): New function. (delete_trace_state_variable): New function. (trace_variable_command): New function. (delete_trace_variable_command): New function. (tvariables_info): New function. (trace_start_command): Download tsvs with initial values. (_initialize_tracepoint): Add new commands. * NEWS: Mention the addition of trace state variables. ==> doc/ChangeLog <== 2009-12-28 Stan Shebs <stan@codesourcery.com> * gdb.texinfo (Trace State Variables): New section. (Tracepoint Packets): Describe trace state variable packets. * agentexpr.texi (Bytecode Descriptions): Describe trace state variable bytecodes. ==> testsuite/ChangeLog <== 2009-12-28 Stan Shebs <stan@codesourcery.com> * gdb.trace/tsv.exp: New file. * gdb.base/completion.exp: Update ambiguous info output.
2009-12-28 * NEWS: Document "info variables" change.Daniel Jacobowitz2-1/+6
* dwarf2read.c (new_symbol): Add file-scope external unresolved symbols to global_symbols. * symtab.c (search_symbols): Skip LOC_UNRESOLVED symbols. doc/ * gdb.texinfo (Symbols): "info variables" prints definitions, not declarations.
2009-12-21 * mi/mi-main.c (mi_cmd_gdb_exit): Flush raw_stdout.Vladimir Prus2-0/+12
2009-12-21 * gpl.texi: Update to version 3 of the GPL.Joel Brobecker2-316/+646
2009-12-20 * Makefile.in: Update copyright header.Joel Brobecker3-6/+10
* observer.texi: Fix the copyright header of the generated files.
2009-12-082009-12-08 Phil Muldoon <pmuldoon@redhat.com>Phil Muldoon2-0/+11
PR python/10804 * python/py-type.c (typy_range): New Function. 2009-12-08 Phil Muldoon <pmuldoon@redhat.com> * gdb.python/py-type.exp (test_range): New test. 2009-12-08 Phil Muldoon <pmuldoon@redhat.com> * gdb.texinfo (Types In Python): Describe range function.
2009-12-032009-12-03 Richard Ward <richard.j.ward1@googlemail.com>Phil Muldoon2-0/+10
* python/py-type.c (convert_field): New attribute "is_base_class". doc/ 2009-12-03 Richard Ward <richard.j.ward1@googlemail.com> * gdb.texinfo (Types In Python): Describe "is_base_class". testsuite/ 2009-12-03 Phil Muldoon <pmuldoon@redhat.com> PR python/10805 * gdb.python/py-type.exp: New file. * gdb.python/py-type.c: New file. * Makefile.in: Add py-type.
2009-12-03gdbTom Tromey2-0/+17
* python/python.c (gdbpy_parse_and_eval): New function. (GdbMethods): Add "parse_and_eval". gdb/testsuite * gdb.python/py-value.exp (test_parse_and_eval): New function. gdb/doc * gdb.texinfo (Basic Python): Document gdb.parse_and_eval.
2009-12-02gdb/ChangeLog:Paul Pluzhnikov2-0/+9
2009-12-02 Paul Pluzhnikov <ppluzhnikov@google.com> * ada-lang.c (ada_value_assign): Use observer_notify_memory_changed. * valops.c (value_assign): Likewise. * defs.h (deprecated_memory_changed_hook): Remove. * top.c (deprecated_memory_changed_hook): Likewise. * interps.c (clear_interpreter_hooks): Adjust. gdb/gdbtk/ChangeLog: 2009-12-02 Paul Pluzhnikov <ppluzhnikov@google.com> * generic/gdbtk-hooks.c (gdbtk_memory_changed): Adjust. (gdbtk_add_hooks): Adjust. gdb/doc/ChangeLog: 2009-12-02 Paul Pluzhnikov <ppluzhnikov@google.com> * observer.texi: New memory_changed observer.
2009-12-01 * gdb.texinfo (Reverse Execution): Fix typo.Tom Tromey2-1/+5
2009-11-25 PR gdb/8704Daniel Jacobowitz2-2/+9
* breakpoint.c (find_condition_and_thread): Correct task error message. * c-exp.y (yylex): Stop before "thread N", "task N", or abbreviations of those. doc/ * gdb.texinfo (Thread-Specific Breakpoints): Thread specifiers are allowed after the breakpoint condition. testsuite/ * gdb.base/condbreak.exp: Test combinations of "break *EXP", "if", and "thread". Correct matching in the previous test.
2009-11-23 PR python/10782:Tom Tromey2-0/+10
* gdb.texinfo (Types In Python): Document Type.pointer.
2009-11-23gdb/ChangeLog:Paul Pluzhnikov2-5/+13
2009-11-23 Paul Pluzhnikov <ppluzhnikov@google.com> * cli/cli-cmds.c (disassemble_command): Split on comma. (init_cli_cmds): Update help. * NEWS: Mention incompatible change to 'disassemble'. gdb/testsuite/ChangeLog: 2009-11-23 Paul Pluzhnikov <ppluzhnikov@google.com> * gdb.asm/asm-source.exp: Adjust. * gdb.base/help.exp: Adjust. gdb/doc/ChangeLog: 2009-11-23 Paul Pluzhnikov <ppluzhnikov@google.com> * gdb.texinfo (Machine Code): Adjust.
2009-11-11 * agentexpr.texi (Tracing On Symmetrix): Delete section.Pedro Alves2-141/+6
(Using Agent Expressions): Delete cross reference.
2009-11-07 * gdbint.texinfo, stabs.texinfo: Move the @setchapternewpageJoel Brobecker3-4/+9
and @settitle directives up to help makeinfo find them.
2009-11-02gdb/Jan Kratochvil2-6/+12
* symfile.c (build_id_to_debug_filename): New variable debugdir. Move variables size, s and data into a new inner block. Change xmalloc for alloca, use direct BUILDID->SIZE there now. Loop for the DEBUG_FILE_DIRECTORY components. (find_separate_debug_file): New variable debugdir and debugdir_end. Loop for the DEBUG_FILE_DIRECTORY components. (_initialize_symfile): For "debug-file-directory" use plural and note one can use multiple components now. gdb/doc/ * gdb.texinfo (set debug-file-directory, show debug-file-directory) (Auto-loading): Use plural and note one can use multiple components now. gdb/testsuite/ * gdb.base/sepdebug.exp: New test_different_dir call for multiple-dirs.
2009-11-01 * gdb.texinfo (GDB/MI Stack Manipulation): MakeVladimir Prus2-6/+14
-stack-list-arguments have the same documentation for parameter as -stack-list-locals. Add comas.
2009-10-28 gdb/:Joel Brobecker1-3/+35
* remote.c (interrupt_sequence_control_c) (interrupt_sequence_break, interrupt_sequence_break_g) (interrupt_sequence_modes): New constants. (interrupt_sequence_mode, interrupt_on_connect): New variable. (show_interrupt_sequence): New function. (set_remotebreak, show_remotebreak): New function. (send_interrupt_sequence): New function. (remote_start_remote): Call send_interrupt_sequence if interrupt_on_connect is true. (remote_stop_as): Call send_interrupt_sequence. (_initialize_remote): Add interrupt-sequence and interrupt-on-connect, modify remotebreak to call set_remotebreak and show_remotebreak. * NEWS: Add entry for "set/show remote interrupt-sequence" and "set/show remote interrupt-on-connect". Also mention that "set/show remotebreak" is now deprecated. gdb/doc/: * gdb.texinfo (Remote Configuration): Add "set/show remote interrupt-sequence" and "set/show remote interrupt-on-connect" command.
2009-10-272009-10-27 Tom Tromey <tromey@redhat.com>Phil Muldoon2-0/+14
Eli Zaretskii <eliz@gnu.org> PR python/10781 * gdb.texinfo (Values From Inferior): Document cast method.
2009-10-232009-10-22 Paul Pluzhnikov <ppluzhnikov@google.com>Paul Pluzhnikov2-11/+18
* disasm.h (DISASSEMBLY_OMIT_FNAME) New define. (gdb_disassembly): Correct parameter name. * disasm.c (dump_insns): Adjust. (gdb_disassembly): Fix indentation. * cli/cli-cmds.c (disassemble_command): Adjust. doc/ChangeLog: 2009-10-22 Paul Pluzhnikov <ppluzhnikov@google.com> * gdb.texinfo (Machine Code): Mention function name in disasssembly and adjust example. testsuite/ChangeLog: 2009-10-22 Paul Pluzhnikov <ppluzhnikov@google.com> * gdb.asm/asm-source.exp: Adjust.
2009-10-222009-10-22 Michael Snyder <msnyder@vmware.com>Michael Snyder2-3/+25
* gdb.texinfo (Process Record and Replay): Document new form of info record command. Also document the new save and restore commands.
2009-10-212009-10-21 Paul Pluzhnikov <ppluzhnikov@google.com>Paul Pluzhnikov2-19/+40
* defs.h (pc_prefix): New prototype. * disasm.c (dump_insns): Mark current instruction. * printcmd.c (do_examine): Likewise. (pc_prefix): New function. * stack.c (print_frame_info): Disassemble entire current line. doc/ChangeLog: 2009-10-21 Paul Pluzhnikov <ppluzhnikov@google.com> * gdb.texinfo (Machine Code): Mention current pc marker. (Memory): Likewise. testsuite/ChangeLog: 2009-10-21 Paul Pluzhnikov <ppluzhnikov@google.com> * gdb.base/consecutive.exp: Adjust. * gdb.base/display.exp: Likewise. * gdb.base/pc-fp.exp: Likewise. * gdb.base/sigbpt.exp: Likewise.
generated by cgit v1.1 at 2024-12-18 18:44:42 +0000