| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This changes some spots to use ui_out_emit_list. This only touches
"easy" cases, where the cleanup was used in a block-structured way.
There's also one more use of ui_out_emit_tuple in here.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Use
ui_out_emit_list.
* stack.c (print_frame): Use ui_out_emit_list.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_list.
* mi/mi-main.c (print_one_inferior)
(mi_cmd_data_list_register_names)
(mi_cmd_data_list_register_values, mi_cmd_list_features)
(mi_cmd_list_target_features, mi_cmd_trace_frame_collected): Use
ui_out_emit_list.
* mi/mi-interp.c (mi_on_normal_stop_1): Use ui_out_emit_list.
(mi_output_solib_attribs): Use ui_out_emit_list,
ui_out_emit_tuple.
* mi/mi-cmd-var.c (varobj_update_one): Use ui_out_emit_list.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
(mi_cmd_stack_list_args, list_args_or_locals): Use
ui_out_emit_list.
* disasm.c (do_assembly_only): Use ui_out_emit_list.
* breakpoint.c (print_solib_event, output_thread_groups): Use
ui_out_emit_list.
|
|
This patch changes various places to use ui_out_emit_tuple,
eliminating a number of cleanups. This patch only tackles "easy"
cases, which are ones where the cleanups in question were
block-structured and did not involve any changes other than the
obvious replacement.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* record-btrace.c (record_btrace_insn_history)
(record_btrace_insn_history_range, record_btrace_call_history)
(record_btrace_call_history_range): Use ui_out_emit_tuple.
* thread.c (do_captured_list_thread_ids, print_thread_info_1): Use
ui_out_emit_tuple.
* stack.c (print_frame_info): Use ui_out_emit_tuple.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple.
* skip.c (skip_info): Use ui_out_emit_tuple.
* remote.c (show_remote_cmd): Use ui_out_emit_tuple.
* progspace.c (print_program_space): Use ui_out_emit_tuple.
* probe.c (info_probes_for_ops): Use ui_out_emit_tuple.
* osdata.c (info_osdata): Use ui_out_emit_tuple.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_tuple.
* mi/mi-main.c (print_one_inferior, list_available_thread_groups)
(output_register, mi_cmd_data_read_memory)
(mi_cmd_data_read_memory_bytes, mi_load_progress)
(mi_cmd_trace_frame_collected): Use ui_out_emit_tuple.
* mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one):
Use ui_out_emit_tuple.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use
ui_out_emit_tuple.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions)
(mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_tuple.
* inferior.c (print_inferior): Use ui_out_emit_tuple.
* gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple.
* disasm.c (do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly): Use ui_out_emit_tuple.
* cp-abi.c (list_cp_abis): Use ui_out_emit_tuple.
* cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple.
* breakpoint.c (print_one_breakpoint_location)
(print_one_breakpoint): Use ui_out_emit_tuple.
* auto-load.c (print_script, info_auto_load_cmd): Use
ui_out_emit_tuple.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple.
|
|
The memory disassemble_info::disassembler_options points to is always
owned by the client. I.e., that field is an non-owning, observing
pointer. Thus const makes sense.
Are the include/ and opcodes/ bits OK?
Tested on x86_64 Fedora 23, built with --enable-targets=all.
include/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* dis-asm.h (disassemble_info) <disassembler_options>: Now a
"const char *".
(next_disassembler_option): Constify.
opcodes/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arc-dis.c (parse_option, parse_disassembler_options): Constify.
* arm-dis.c (parse_arm_disassembler_options): Constify.
* ppc-dis.c (powerpc_init_dialect): Constify local.
* vax-dis.c (parse_disassembler_options): Constify.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arm-tdep.c (show_disassembly_style_sfunc): Constify local.
* disasm.c (set_disassembler_options): Constify local.
* i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
|
|
This commit adds support to GDB so that it can modify the disassembler-options
value that is passed to the disassembler, similar to objdump's -M option.
Currently, the only supported targets are ARM, PowerPC and S/390, but
adding support for a new target(s) is not difficult.
include/
* dis-asm.h (disasm_options_t): New typedef.
(parse_arm_disassembler_option): Remove prototype.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(get_arm_regname_num_options): Likewise.
(disassemble_init_s390): New prototype.
(disassembler_options_powerpc): Likewise.
(disassembler_options_arm): Likewise.
(disassembler_options_s390): Likewise.
(remove_whitespace_and_extra_commas): Likewise.
(disassembler_options_cmp): Likewise.
(next_disassembler_option): New inline function.
(FOR_EACH_DISASSEMBLER_OPTION): New macro.
opcodes/
* disassemble.c Include "safe-ctype.h".
(disassemble_init_for_target): Handle s390 init.
(remove_whitespace_and_extra_commas): New function.
(disassembler_options_cmp): Likewise.
* arm-dis.c: Include "libiberty.h".
(NUM_ELEM): Delete.
(regnames): Use long disassembler style names.
Add force-thumb and no-force-thumb options.
(NUM_ARM_REGNAMES): Rename from this...
(NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE.
(get_arm_regname_num_options): Delete.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(parse_disassembler_options): Likewise.
(parse_arm_disassembler_option): Rename from this...
(parse_arm_disassembler_options): ...to this. Make static.
Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options.
(print_insn): Use parse_arm_disassembler_options.
(disassembler_options_arm): New function.
(print_arm_disassembler_options): Handle updated regnames.
* ppc-dis.c: Include "libiberty.h".
(ppc_opts): Add "32" and "64" entries.
(ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp.
(powerpc_init_dialect): Add break to switch statement.
Use new FOR_EACH_DISASSEMBLER_OPTION macro.
(disassembler_options_powerpc): New function.
(print_ppc_disassembler_options): Use ARRAY_SIZE.
Remove printing of "32" and "64".
* s390-dis.c: Include "libiberty.h".
(init_flag): Remove unneeded variable.
(struct s390_options_t): New structure type.
(options): New structure.
(init_disasm): Rename from this...
(disassemble_init_s390): ...to this. Add initializations for
current_arch_mask and option_use_insn_len_bits_p. Remove init_flag.
(print_insn_s390): Delete call to init_disasm.
(disassembler_options_s390): New function.
(print_s390_disassembler_options): Print using information from
struct 'options'.
* po/opcodes.pot: Regenerate.
binutils/
* objdump.c (main): Use remove_whitespace_and_extra_commas.
gdb/
* NEWS: Mention new set/show disassembler-options commands.
* doc/gdb.texinfo: Document new set/show disassembler-options commands.
* disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h".
(prospective_options): New static variable.
(gdb_disassembler::gdb_disassembler): Initialize
m_di.disassembler_options.
(gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options.
(get_disassembler_options): New function.
(set_disassembler_options): Likewise.
(set_disassembler_options_sfunc): Likewise.
(show_disassembler_options_sfunc): Likewise.
(disassembler_options_completer): Likewise.
(_initialize_disasm): Likewise.
* disasm.h (get_disassembler_options): New prototype.
(set_disassembler_options): Likewise.
* gdbarch.sh (gdbarch_disassembler_options): New variable.
(gdbarch_verify_disassembler_options): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* arm-tdep.c (num_disassembly_options): Delete.
(set_disassembly_style): Likewise.
(arm_disassembler_options): New static variable.
(set_disassembly_style_sfunc): Convert short style name into long
option name. Call set_disassembler_options.
(show_disassembly_style_sfunc): New function.
(arm_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
(_initialize_arm_tdep): Delete regnames variable and update callers.
(arm_disassembler_options): Initialize.
(disasm_options): New variable.
(num_disassembly_options): Rename from this...
(num_disassembly_styles): ...to this. Compute by scanning through
disasm_options.
(valid_disassembly_styles): Initialize using disasm_options.
Remove calls to parse_arm_disassembler_option, get_arm_regnames and
set_arm_regname_option.
Pass show_disassembly_style_sfunc to the "disassembler" setshow command.
* rs6000-tdep.c (powerpc_disassembler_options): New static variable.
(rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
* s390-tdep.c (s390_disassembler_options): New static variable.
(s390_gdbarch_init):all set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
gdb/testsuite/
* gdb.arch/powerpc-power.exp: Delete test.
* gdb.arch/powerpc-power.s: Likewise.
* gdb.disasm/disassembler-options.exp: New test.
* gdb.arch/powerpc-altivec.exp: Likewise.
* gdb.arch/powerpc-altivec.s: Likewise.
* gdb.arch/powerpc-altivec2.exp: Likewise.
* gdb.arch/powerpc-altivec2.s: Likewise.
* gdb.arch/powerpc-altivec3.exp: Likewise.
* gdb.arch/powerpc-altivec3.s: Likewise.
* gdb.arch/powerpc-power7.exp: Likewise.
* gdb.arch/powerpc-power7.s: Likewise.
* gdb.arch/powerpc-power8.exp: Likewise.
* gdb.arch/powerpc-power8.s: Likewise.
* gdb.arch/powerpc-power9.exp: Likewise.
* gdb.arch/powerpc-power9.s: Likewise.
* gdb.arch/powerpc-vsx.exp: Likewise.
* gdb.arch/powerpc-vsx.s: Likewise.
* gdb.arch/powerpc-vsx2.exp: Likewise.
* gdb.arch/powerpc-vsx2.s: Likewise.
* gdb.arch/powerpc-vsx3.exp: Likewise.
* gdb.arch/powerpc-vsx3.s: Likewise.
* gdb.arch/arm-disassembler-options.exp: Likewise.
* gdb.arch/powerpc-disassembler-options.exp: Likewise.
* gdb.arch/s390-disassembler-options.exp: Likewise.
|
|
gdb_pretty_print_insn allocates and destroys a couple local buffers
each time it is called, which can be many times when disassembling a
region of memory. Avoid that overhead by adding a new class that
holds the buffers and making gdb_pretty_print_insn a method of that
class, so that the buffers can be reused across calls.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm.c (gdb_pretty_print_insn): Rename to ...
(gdb_pretty_print_disassembler::pretty_print_insn): ... this.
Remove gdbarch parameter. Adapt to clear the object's buffers
instead of allocating new buffers, and to print using the object's
gdb_disassembler instead of calling gdb_print_insn.
(dump_insns): Use gdb_pretty_print_disassembler.
* disasm.h (gdb_pretty_print_insn): Delete declaration.
(gdb_pretty_print_disassembler): New class.
* record-btrace.c (btrace_insn_history): Use
gdb_pretty_print_disassembler.
|
|
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
|
|
ui_file_rewind is a ui_file method that only really works with mem
buffer files, and is a nop on other ui_file types. It'd be desirable
to eliminate it from the base ui_file interface, and move it to the
"mem_fileopen" subclass of ui_file instead. A following patch does
just that.
Unfortunately, there are a couple references to ui_file_rewind inside
gdb_disassembler::pretty_print_insn that were made harder to eliminate
with the recent addition of the gdb_disassembler wrapper.
Before the gdb_disassembler wrapper was added, in commit
e47ad6c0bd7aa3 ("Refactor disassembly code"), gdb_pretty_print_insn
used to be passed a ui_file pointer as argument, and it was simple to
adjust that pointer be a "mem_fileopen" ui_file pointer instead, since
there's only one gdb_pretty_print_insn caller.
That commit made gdb_pretty_print_insn be a method of
gdb_disassembler, and removed the method's ui_file parameter at the
same time, replaced by referencing the gdb_disassembler's stream
instead. The trouble is that a gdb_disassembler can be instantiated
with a pointer any kind of ui_file. Casting the gdb_disassembler's
stream to a mem_fileopen ui_file inside
gdb_disassembler::pretty_print_insn in order to call the reset method
would be gross hack.
The fix here is to:
- make gdb_disassembler::pretty_print_insn a be free function again
instead of a method of gdb_disassembler. I.e., bring back
gdb_pretty_print_insn.
- but, don't add back the ui_file * parameter. Instead, move the
mem_fileopen allocation inside. That is a better interface, given
that the ui_file is only ever used as temporary scratch buffer as
an implementation detail of gdb_pretty_print_insn. The function's
real "where to send output" parameter is the ui_out pointer. (A
following patch will add back buffer reuse across invocations
differently).
- don't add back a disassemble_info pointer either. That used to be
necessary for this bit:
err = m_di.read_memory_func (pc, &data, 1, &m_di);
if (err != 0)
m_di.memory_error_func (err, pc, &m_di);
... but AFAIK, it's not really necessary. We can replace those
three lines with a call to read_code. This seems to fix a
regression even, because before commit d8b49cf0c891d0 ("Don't throw
exception in dis_asm_memory_error"), that memory_error_func call
would throw an error/exception, but now it only records the error
in the gdb_disassembler's m_err_memaddr field. (read_code throws
on error.)
With all these, gdb_pretty_print_insn is completely layered on top of
gdb_disassembler only using the latter's public API.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm.c (gdb_disassembler::pretty_print_insn): Rename to...
(gdb_pretty_print_insn): ... this. Now a free function. Add back
a 'gdbarch' parameter. Allocate a mem_fileopen stream here.
Adjust to call gdb_print_insn instead of
gdb_disassembler::print_insn.
(dump_insns, do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly, do_assembly_only): Add back a
'gdbarch' parameter. Remove gdb_disassembler parameter.
(gdb_disassembly): Don't allocate a gdb_disassembler here.
* disasm.h (gdb_disassembler::pretty_print_insn): Delete
declaration.
(gdb_pretty_print_insn): Re-add declaration.
* record-btrace.c (btrace_insn_history): Don't allocate a
gdb_disassembler here. Adjust to call gdb_pretty_print_insn.
|
|
The file_string parameter was added in 8f0eea0 (sorry, no title back
then) and has never actually been used.
gdb/ChangeLog:
* disasm.h (gdb_disassembly): Remove file_string parameter.
* disasm.c (gdb_disassembly): Likewise.
* cli/cli-cmds.c (print_disassembly): Adapt.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Likewise.
* stack.c (do_gdb_disassembly): Likewise.
|
|
Hi,
GDB calls some APIs from opcodes to do disassembly and provide some
call backs. This model makes troubles on C++ exception unwinding,
because GDB is a C++ program, and opcodes is still compiled as C.
As we can see, frame #10 and #12 are C++, while #frame 11 is C,
#10 0x0000000000544228 in memory_error (err=TARGET_XFER_E_IO, memaddr=<optimized out>) at ../../binutils-gdb/gdb/corefile.c:237
#11 0x00000000006b0a54 in print_insn_aarch64 (pc=0, info=0xffffffffeeb0) at ../../binutils-gdb/opcodes/aarch64-dis.c:3185
#12 0x0000000000553590 in gdb_pretty_print_insn (gdbarch=gdbarch@entry=0xbbceb0, uiout=uiout@entry=0xbc73d0, di=di@entry=0xffffffffeeb0,
insn=0xffffffffed40, insn@entry=0xffffffffed90, flags=flags@entry=0,
C++ exception unwinder can't go across frame #11 unless it has
unwind table. However, C program on many architectures doesn't
have it in default. As a result, GDB aborts, which is described
in PR 20939.
This is not the first time we see this kind of problem. We've
had a commit 89525768cd086a0798a504c81fdf7ebcd4c904e1
"Propagate GDB/C++ exceptions across readline using sj/lj-based TRY/CATCH".
We can fix the disassembly bug in a similar way, this is the option one.
Since opcodes is built with gdb, we fix this problem in a different
way as we did for the same issue with readline. Instead of throwing
exception in dis_asm_memory_error, we record the failed memory
address, and throw exception when GDB returns from opcodes disassemblers.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
PR gdb/20939
* disasm.c (gdb_disassembler::dis_asm_memory_error): Don't
call memory_error, save memaddr instead.
(gdb_disassembler::print_insn): If gdbarch_print_insn returns
negative, cal memory_error.
* disasm.h (gdb_disassembler) <m_err_memaddr>: New field.
gdb/testsuite:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in (do_arch_tests): Test
disassemble on address 0.
|
|
This patch addes class gdb_disassembler, and refactor
code to use it. The gdb_disassembler object is saved
in disassember_info.application_data. However,
disassember_info.application_data is already used by
gdb for arm, mips spu, and scm-disasm. In arm and mips,
.application_data is gdbarch, but we can still get gdbarch
from gdb_disassember.
The use of application_data in spu is a little bit
complicated. It creates its own disassemble_info, and
save spu_dis_asm_data in .application_data. This will
overwrite the pointer to gdb_disassembler, so we need
to find another place to save spu_dis_asm_data. I
extend disassemble_info, and put "id" there.
gdb:
2017-01-26 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Include "disasm.h".
(gdb_print_insn_arm): Update code to get gdbarch.
* disasm.c (dis_asm_read_memory): Change it to
gdb_disassembler::dis_asm_read_memory.
(dis_asm_memory_error): Likewise.
(dis_asm_print_address): Likewise.
(gdb_pretty_print_insn): Change it to
gdb_disassembler::pretty_print_insn.
(dump_insns): Add one argument gdb_disassemlber. All
callers updated.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
(do_assembly_only): Likewise.
(gdb_disassembler::gdb_disassembler): New.
(gdb_disassembler::print_insn): New.
* disasm.h (class gdb_disassembler): New.
(gdb_pretty_print_insn): Remove declaration.
(gdb_disassemble_info): Likewise.
* guile/scm-disasm.c (class gdbscm_disassembler): New.
(gdbscm_disasm_read_memory_worker): Update.
(gdbscm_disasm_read_memory): Update.
(gdbscm_disasm_memory_error): Remove.
(gdbscm_disasm_print_address): Remove.
(gdbscm_disassembler::gdbscm_disassembler): New.
(gdbscm_print_insn_from_port): Update.
* mips-tdep.c: Include disasm.h.
(gdb_print_insn_mips): Update code to get gdbarch.
* record-btrace.c (btrace_insn_history): Update.
* spu-tdep.c: Include disasm.h.
(struct spu_dis_asm_data): Remove.
(struct spu_dis_asm_info): New.
(spu_dis_asm_print_address): Use spu_dis_asm_info to get
SPU id.
(gdb_print_insn_spu): Cast disassemble_info to
spu_dis_asm_info.
|
|
This patch adds a new function null_stream, which returns a null
stream. The null stream can be used in multiple places. It is
used in gdb_insn_length, and the following patches will use it too.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* disasm.c (do_ui_file_delete): Delete.
(gdb_insn_length): Move code creating stream to ...
* utils.c (null_stream): ... here. New function.
* utils.h (null_stream): Declare.
|
|
This removes make_cleanup_htab_delete in favor of destructors,
building on an earlier patch that added the htab_up typedef.
Testing revealed that more cleanup-removal work was needed in
dwarf2loc.c, so this version of the patch changes code there to use
unordered_set and vector, removing some more cleanups.
2017-01-10 Tom Tromey <tom@tromey.com>
* utils.h (make_cleanup_htab_delete): Don't declare.
* utils.c (do_htab_delete_cleanup, make_cleanup_htab_delete):
Remove.
* linespec.c (decode_compound_collector): Add constructor,
destructor.
(lookup_prefix_sym): Remove cleanup.
(symtab_collector): Add constructor, destructor.
(collect_symtabs_from_filename): Remove cleanup.
* disasm.c (do_mixed_source_and_assembly): Use htab_up.
* compile/compile-c-symbols.c (generate_c_for_variable_locations):
Use htab_up.
* gnu-v3-abi.c (gnuv3_print_vtable): Use htab_up.
* dwarf2read.c (dw2_expand_symtabs_matching)
(dw2_map_symbol_filenames, dwarf_decode_macros)
(write_psymtabs_to_index): Use htab_up.
* dwarf2loc.c (func_verify_no_selftailcall)
(call_site_find_chain_1, func_verify_no_selftailcall)
(chain_candidate, call_site_find_chain_1): Use std::unordered_set,
std::vector, gdb::unique_xmalloc_ptr.
(call_sitep): Remove typedef.
(dwarf2_locexpr_baton_eval): Remove unused variable.
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This patch finalizes the C++ conversion of the ui-out subsystem, by
turning the ui_out and ui_out_impl structures into a single class
hierarchy. ui_out functions are turned into virtual methods of that new
class, so as a result there are a lot of call sites to update.
In the previous version of the patchset, there were separate ui_out and
ui_out_impl classes, but it wasn't really useful and added boilerplate.
In this version there is simply an ui_out base class that is
extended for CLI, TUI and MI.
It's a bit hard to maintain a ChangeLog for such a big patch, I did my
best but I'm sure there are some missing or outdated info in there...
gdb/ChangeLog:
* ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header,
ui_out_table_body, ui_out_field_int, ui_out_field_fmt_int,
ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream,
ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text,
ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags,
ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect):
Remove, replace with a method in class ui_out.
(table_begin_ftype): Remove, replace with pure virtual method in
class ui_out.
(table_body_ftype): Likewise.
(table_end_ftype): Likewise.
(table_header_ftype): Likewise.
(ui_out_begin_ftype): Likewise.
(ui_out_end_ftype): Likewise.
(field_int_ftype): Likewise.
(field_skip_ftype): Likewise.
(field_string_ftype): Likewise.
(field_fmt_ftype): Likewise.
(spaces_ftype): Likewise.
(text_ftype): Likewise.
(message_ftype): Likewise.
(wrap_hint_ftype): Likewise.
(flush_ftype): Likewise.
(redirect_ftype): Likewise.
(data_destroy_ftype): Likewise.
(struct ui_out_impl): Remove, replace with class ui_out.
(ui_out_new): Remove.
(class ui_out): New class.
* ui-out.c (struct ui_out): Remove, replaced with class ui_out.
(current_level): Remove, replace with ui_out method.
(push_level): Likewise.
(pop_level): Likewise.
(uo_table_begin, uo_table_body, uo_table_end, uo_table_header,
uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt,
uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush,
uo_redirect, uo_field_string): Remove.
(ui_out_table_begin): Replace with ...
(ui_out::table_begin): ... this.
(ui_out_table_body): Replace with ...
(ui_out::table_body): ... this.
(ui_out_table_end): Replace with ...
(ui_out::table_end): ... this.
(ui_out_table_header): Replace with ...
(ui_out::table_header): ... this.
(ui_out_begin): Replace with ...
(ui_out::begin): ... this.
(ui_out_end): Replace with ...
(ui_out::end): ... this.
(ui_out_field_int): Replace with ...
(ui_out::field_int): ... this.
(ui_out_field_fmt_int): Replace with ...
(ui_out::field_fmt_int): ... this.
(ui_out_field_core_addr): Replace with ...
(ui_out::field_core_addr): ... this.
(ui_out_field_stream): Replace with ...
(ui_out::field_stream): ... this.
(ui_out_field_skip): Replace with ...
(ui_out::field_skip): ... this.
(ui_out_field_string): Replace with ...
(ui_out::field_string): ... this.
(ui_out_field_fmt): Replace with ...
(ui_out::field_fmt): ... this.
(ui_out_spaces): Replace with ...
(ui_out::spaces): ... this.
(ui_out_text): Replace with ...
(ui_out::text): ... this.
(ui_out_message): Replace with ...
(ui_out::message): ... this.
(ui_out_wrap_hint): Replace with ...
(ui_out::wrap_hint): ... this.
(ui_out_flush): Replace with ...
(ui_out::flush): ... this.
(ui_out_redirect): Replace with ...
(ui_out::redirect): ... this.
(ui_out_test_flags): Replace with ...
(ui_out::test_flags): ... this.
(ui_out_is_mi_like_p): Replace with ...
(ui_out::is_mi_like_p): ... this.
(verify_field): Replace with ...
(ui_out::verify_field): ... this.
(ui_out_query_field): Replace with ...
(ui_out::query_table_field): ... this.
(ui_out_data): Remove.
(ui_out_new): Remove, replace with ...
(ui_out::ui_out): ... this constructor.
(do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end,
do_cleanup_end, make_cleanup_ui_out_tuple_begin_end,
make_cleanup_ui_out_list_begin_end): Update fallouts of struct
ui_out -> class ui_out change.
* cli-out.c (cli_out_data): Remove.
(cli_uiout_dtor): Remove.
(cli_table_begin): Replace with ...
(cli_ui_out::do_table_begin): ... this new method.
(cli_table_body): Replace with ...
(cli_ui_out::do_table_body): ... this new method.
(cli_table_end): Replace with ...
(cli_ui_out::do_table_end): ... this new method.
(cli_table_header): Replace with ...
(cli_ui_out::do_table_header): ... this new method.
(cli_begin): Replace with ...
(cli_ui_out::do_begin): ... this new method.
(cli_end): Replace with ...
(cli_ui_out::do_end): ... this new method.
(cli_field_int): Replace with ...
(cli_ui_out::do_field_int): ... this new method.
(cli_field_skip): Replace with ...
(cli_ui_out::do_field_skip): ... this new method.
(cli_field_string): Replace with ...
(cli_ui_out::do_field_string): ... this new method.
(cli_field_fmt): Replace with ...
(cli_ui_out::do_field_fmt): ... this new method.
(cli_spaces): Replace with ...
(cli_ui_out::do_spaces): ... this new method.
(cli_text): Replace with ...
(cli_ui_out::do_text): ... this new method.
(cli_message): Replace with ...
(cli_ui_out::do_message): ... this new method.
(cli_wrap_hint): Replace with ...
(cli_ui_out::do_wrap_hint): ... this new method.
(cli_flush): Replace with ...
(cli_ui_out::do_flush): ... this new method.
(cli_redirect): Replace with ...
(cli_ui_out::do_redirect): ... this new method.
(out_field_fmt): Replace with ...
(cli_ui_out::out_field_fmt): ... this new method.
(field_separator): Replace with ...
(cli_ui_out::field_separator): ... this new method.
(cli_out_set_stream): Replace with ...
(cli_ui_out::set_stream): ... this new method.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_ui_out_impl::cli_ui_out_impl): New constructor.
(cli_ui_out_impl::~cli_ui_out_impl): New destructor.
(cli_out_new): Change return type to cli_ui_out *, instantiate a
cli_ui_out.
* cli-out.h (cli_ui_out_data): Remove, replace with class
cli_ui_out.
(class cli_ui_out): New class.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_out_new): Change return type to cli_ui_out*.
(cli_out_set_stream): Remove.
* cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type
to cli_ui_out*.
(cli_interpreter_resume): Adapt.
(cli_interpreter_exec): Adapt.
* mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove.
(mi_ui_out_impl): Remove.
(mi_table_begin): Replace with ...
(mi_ui_out::do_table_begin): ... this.
(mi_table_body): Replace with ...
(mi_ui_out::do_table_body): ... this.
(mi_table_end): Replace with ...
(mi_ui_out::do_table_end): ... this.
(mi_table_header): Replace with ...
(mi_ui_out::do_table_header): ... this.
(mi_begin): Replace with ...
(mi_ui_out::do_begin): ... this.
(mi_end): Replace with ...
(mi_ui_out::do_end): ... this.
(mi_field_int): Replace with ...
(mi_ui_out::do_field_int): ... this.
(mi_field_skip): Replace with ...
(mi_ui_out::do_field_skip): ... this.
(mi_field_string): Replace with ...
(mi_ui_out::do_field_string): ... this.
(mi_field_fmt): Replace with ...
(mi_ui_out::do_field_fmt): ... this.
(mi_spaces): Replace with ...
(mi_ui_out::do_spaces): ... this.
(mi_text): Replace with ...
(mi_ui_out::do_text): ... this.
(mi_message): Replace with ...
(mi_ui_out::do_message): ... this.
(mi_wrap_hint): Replace with ...
(mi_ui_out::do_wrap_hint): ... this.
(mi_flush): Replace with ...
(mi_ui_out::do_flush): ... this.
(mi_redirect): Replace with ...
(mi_ui_out::do_redirect):
(field_separator): Replace with ...
(mi_ui_out::field_separator):
(mi_open): Replace with ...
(mi_ui_out::open): ... this.
(mi_close): Replace with ...
(mi_ui_out::close): ... this.
(mi_out_rewind): Replace with ...
(mi_ui_out::rewind): ... this.
(mi_out_put): Replace with ...
(mi_ui_out::put): ... this.
(mi_version): Replace with ...
(mi_ui_out::version): ... this.
(mi_out_data_ctor): Replace with ...
(mi_ui_out::mi_ui_out): ... this.
(mi_out_data_dtor): Replace with ...
(mi_ui_out::~mi_ui_out): ... this.
(mi_out_new): Change return type to mi_ui_out*, instantiate
an mi_ui_out object.
(as_mi_ui_out): New function.
(mi_version): Update fallouts of struct ui_out to class ui_out
transition.
(mi_out_put): Likewise.
(mi_out_rewind): Likewise.
* mi/mi-out.h (mi_out_new): Change return type to mi_ui_out*.
* tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl):
Remove.
(tui_field_int): Replace with ...
(tui_ui_out::do_field_int): ... this.
(tui_field_string): Replace with ...
(tui_ui_out::do_field_string): ... this.
(tui_field_fmt): Replace with ...
(tui_ui_out::do_field_fmt): ... this.
(tui_text): Replace with ...
(tui_ui_out::do_text): ... this.
(tui_out_new): Change return type to tui_ui_out*, instantiate
tui_ui_out object.
(tui_ui_out::tui_ui_out): New.
* tui/tui-out.h: New file.
* tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h.
* tui/tui-io.c: Include tui/tui-out.h.
(tui_old_uiout): Change type to cli_ui_out*.
(tui_setup_io): Use dynamic_cast.
* tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out*.
* tui/tui-interp.c (tui_resume): Adapt.
* ada-lang.c (print_it_exception): Update fallouts of struct
ui_out to class ui_out transition.
(print_one_exception): Likewise.
(print_mention_exception): Likewise.
* ada-tasks.c (print_ada_task_info): Likewise.
(info_task): Likewise.
(task_command): Likewise.
* auto-load.c (print_script): Likewise.
(auto_load_info_scripts): Likewise.
(info_auto_load_cmd): Likewise.
* break-catch-sig.c (signal_catchpoint_print_one): Likewise.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
(print_one_exception_catchpoint): Likewise.
(print_one_detail_exception_catchpoint): Likewise.
(print_mention_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise.
(print_solib_event): Likewise.
(watchpoint_check): Likewise.
(wrap_indent_at_field): Likewise.
(print_breakpoint_location): Likewise.
(output_thread_groups): Likewise.
(print_one_breakpoint_location): Likewise.
(breakpoint_1): Likewise.
(default_collect_info): Likewise.
(watchpoints_info): Likewise.
(print_it_catch_fork): Likewise.
(print_one_catch_fork): Likewise.
(print_it_catch_vfork): Likewise.
(print_one_catch_vfork): Likewise.
(print_it_catch_solib): Likewise.
(print_one_catch_solib): Likewise.
(print_it_catch_exec): Likewise.
(print_one_catch_exec): Likewise.
(mention): Likewise.
(print_it_ranged_breakpoint): Likewise.
(print_one_ranged_breakpoint): Likewise.
(print_one_detail_ranged_breakpoint): Likewise.
(print_mention_ranged_breakpoint): Likewise.
(print_it_watchpoint): Likewise.
(print_mention_watchpoint): Likewise.
(print_it_masked_watchpoint): Likewise.
(print_one_detail_masked_watchpoint): Likewise.
(print_mention_masked_watchpoint): Likewise.
(bkpt_print_it): Likewise.
(tracepoint_print_one_detail): Likewise.
(tracepoint_print_mention): Likewise.
(update_static_tracepoint): Likewise.
(tracepoints_info): Likewise.
(save_breakpoints): Likewise.
* cli/cli-cmds.c (complete_command): Likewise.
* cli/cli-logging.c (set_logging_redirect): Likewise.
(pop_output_files): Likewise.
(handle_redirections): Likewise.
* cli/cli-script.c (print_command_lines): Likewise.
* cli/cli-setshow.c (do_show_command): Likewise.
(cmd_show_list): Likewise.
* cp-abi.c (list_cp_abis): Likewise.
(show_cp_abi_cmd): Likewise.
* darwin-nat-info.c (darwin_debug_regions_recurse): Likewise.
* disasm.c (gdb_pretty_print_insn): Likewise.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
* gdb_bfd.c (print_one_bfd): Likewise.
(maintenance_info_bfds): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise.
* i386-tdep.c (i386_mpx_print_bounds): Likewise.
* infcmd.c (run_command_1): Likewise.
(print_return_value_1): Likewise.
* inferior.c (print_selected_inferior): Likewise.
(print_inferior): Likewise.
* infrun.c (print_end_stepping_range_reason): Likewise.
(print_signal_exited_reason): Likewise.
(print_exited_reason): Likewise.
(print_signal_received_reason): Likewise.
(print_no_history_reason): Likewise.
* interps.c (interp_set): Likewise.
* linespec.c (decode_line_full): Likewise.
* linux-thread-db.c (info_auto_load_libthread_db): Likewise.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise.
(mi_cmd_env_path): Likewise.
(mi_cmd_env_dir): Likewise.
(mi_cmd_inferior_tty_show): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise.
(print_partial_file_name): Likewise.
(mi_cmd_file_list_exec_source_files): Likewise.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise.
(mi_cmd_info_gdb_mi_command): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise.
(mi_cmd_stack_list_args): Likewise.
(list_arg_or_local): Likewise.
* mi/mi-cmd-var.c (print_varobj): Likewise.
(mi_cmd_var_create): Likewise.
(mi_cmd_var_delete): Likewise.
(mi_cmd_var_set_format): Likewise.
(mi_cmd_var_show_format): Likewise.
(mi_cmd_var_info_num_children): Likewise.
(mi_cmd_var_list_children): Likewise.
(mi_cmd_var_info_type): Likewise.
(mi_cmd_var_info_path_expression): Likewise.
(mi_cmd_var_info_expression): Likewise.
(mi_cmd_var_show_attributes): Likewise.
(mi_cmd_var_evaluate_expression): Likewise.
(mi_cmd_var_assign): Likewise.
(varobj_update_one): Likewise.
* mi/mi-interp.c (as_mi_interp): Likewise.
(mi_on_normal_stop_1): Likewise.
(mi_tsv_modified): Likewise.
(mi_breakpoint_created): Likewise.
(mi_breakpoint_modified): Likewise.
(mi_solib_loaded): Likewise.
(mi_solib_unloaded): Likewise.
(mi_command_param_changed): Likewise.
(mi_memory_changed): Likewise.
(mi_user_selected_context_changed): Likewise.
* mi/mi-main.c (print_one_inferior): Likewise.
(output_cores): Likewise.
(list_available_thread_groups): Likewise.
(mi_cmd_data_list_register_names): Likewise.
(mi_cmd_data_list_changed_registers): Likewise.
(output_register): Likewise.
(mi_cmd_data_evaluate_expression): Likewise.
(mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_list_features): Likewise.
(mi_cmd_list_target_features): Likewise.
(mi_cmd_add_inferior): Likewise.
(mi_execute_command): Likewise.
(mi_load_progress): Likewise.
(print_variable_or_computed): Likewise.
(mi_cmd_trace_frame_collected): Likewise.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise.
* osdata.c (info_osdata_command): Likewise.
* probe.c (gen_ui_out_table_header_info): Likewise.
(print_ui_out_not_applicables): Likewise.
(print_ui_out_info): Likewise.
(info_probes_for_ops): Likewise.
(enable_probes_command): Likewise.
(disable_probes_command): Likewise.
* progspace.c (print_program_space): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
* python/py-framefilter.c (py_print_type): Likewise.
(py_print_value): Likewise.
(py_print_single_arg): Likewise.
(enumerate_args): Likewise.
(enumerate_locals): Likewise.
(py_print_args): Likewise.
(py_print_frame): Likewise.
* record-btrace.c (btrace_ui_out_decode_error): Likewise.
(btrace_call_history_insn_range): Likewise.
(btrace_call_history_src_line): Likewise.
(btrace_call_history): Likewise.
* remote.c (show_remote_cmd): Likewise.
* skip.c (skip_info): Likewise.
* solib.c (info_sharedlibrary_command): Likewise.
* source.c (print_source_lines_base): Likewise.
* spu-tdep.c (info_spu_event_command): Likewise.
(info_spu_signal_command): Likewise.
(info_spu_mailbox_list): Likewise.
(info_spu_dma_cmdlist): Likewise.
(info_spu_dma_command): Likewise.
(info_spu_proxydma_command): Likewise.
* stack.c (print_stack_frame): Likewise.
(print_frame_arg): Likewise.
(read_frame_arg): Likewise.
(print_frame_args): Likewise.
(print_frame_info): Likewise.
(print_frame): Likewise.
* symfile.c (load_progress): Likewise.
(generic_load): Likewise.
(print_transfer_performance): Likewise.
* thread.c (do_captured_list_thread_ids): Likewise.
(print_thread_info_1): Likewise.
(restore_selected_frame): Likewise.
(do_captured_thread_select): Likewise.
(print_selected_thread_frame): Likewise.
* top.c (execute_command_to_string): Likewise.
* tracepoint.c (tvariables_info_1): Likewise.
(trace_status_mi): Likewise.
(tfind_1): Likewise.
(print_one_static_tracepoint_marker): Likewise.
(info_static_tracepoint_markers_command): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
(fputs_maybe_filtered): Likewise.
|
|
Otherwise including <string> or some other C++ header is broken.
E.g.:
In file included from /opt/gcc/include/c++/7.0.0/bits/char_traits.h:39:0,
from /opt/gcc/include/c++/7.0.0/string:40,
from /home/pedro/gdb/mygit/cxx-convertion/src/gdb/infrun.c:68:
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
min(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:265:56: error: macro "max" passed 3 arguments, but takes just 2
max(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
In file included from .../src/gdb/infrun.c:21:0:
To the best of my grepping abilities, I believe I adjusted all min/max
calls.
gdb/ChangeLog:
2016-09-16 Pedro Alves <palves@redhat.com>
* defs.h (min, max): Delete.
* aarch64-tdep.c: Include <algorithm> and use std::min and
std::max throughout.
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64-windows-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* ctf.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* environ.c: Likewise.
* exec.c: Likewise.
* f-exp.y: Likewise.
* findcmd.c: Likewise.
* ft32-tdep.c: Likewise.
* gcore.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* linux-thread-db.c: Likewise.
* lm32-tdep.c: Likewise.
* m32r-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* memrange.c: Likewise.
* minidebug.c: Likewise.
* mips-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* nds32-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* parse.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* probe.c: Likewise.
* record-btrace.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* rx-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-linux-tdep.c: Likewise.
* ser-tcp.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* source.c: Likewise.
* sparc-tdep.c: Likewise.
* symfile.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* xtensa-tdep.c: Likewise.
* cli/cli-cmds.c: Likewise.
* compile/compile-object-load.c: Likewise.
|
|
This patch consolidates the (possibly-questionable) spots where we
remove a declaration but continue to call some function for side
effects. In a couple of cases it wasn't entirely clear to me that
this mattered; and in some other cases it might be more aesthetically
pleasing to use ATTRIBUTE_UNUSED. So, I broke this out into a
separate patch for simpler review.
2016-07-14 Tom Tromey <tom@tromey.com>
* arch-utils.c (default_skip_permanent_breakpoint): Remove
"bp_insn".
* disasm.c (do_assembly_only): Remove "num_displayed".
* dwarf2read.c (read_abbrev_offset): Remove "length".
(dwarf_decode_macro_bytes) <DW_MACINFO_vendor_ext>: Remove
"constant".
* m32c-tdep.c (make_regs): Remove "r2hl", "r3hl", and "intbhl".
* microblaze-tdep.c (microblaze_frame_cache): Remove "func".
* tracefile.c (trace_save): Remove "status".
|
|
gdb/ChangeLog:
2016-05-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused
variables.
* aarch64-tdep.c (aarch64_skip_prologue): Likewise.
(aarch64_scan_prologue): Likewise.
(aarch64_prologue_prev_register): Likewise.
(aarch64_dwarf2_prev_register): Likewise.
(pass_in_v): Likewise.
(aarch64_push_dummy_call): Likewise.
(aarch64_breakpoint_from_pc): Likewise.
(aarch64_return_in_memory): Likewise.
(aarch64_return_value): Likewise.
(aarch64_displaced_step_b_cond): Likewise.
(aarch64_displaced_step_cb): Likewise.
(aarch64_displaced_step_tb): Likewise.
(aarch64_gdbarch_init): Likewise.
(aarch64_process_record): Likewise.
* alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise.
* alpha-tdep.c (_initialize_alpha_tdep): Likewise.
* amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise.
* amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise.
* amd64-tdep.c (fixup_riprel): Likewise.
* amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise.
(amd64_windows_frame_decode_insns): Likewise.
(amd64_windows_frame_cache): Likewise.
(amd64_windows_frame_prev_register): Likewise.
(amd64_windows_frame_this_id): Likewise.
(amd64_windows_init_abi): Likewise.
* arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise.
(arm_linux_get_next_pcs_syscall_next_pc): Likewise.
* arm-symbian-tdep.c (arm_symbian_init_abi): Likewise.
* arm-tdep.c (arm_make_epilogue_frame_cache): Likewise.
(arm_epilogue_frame_prev_register): Likewise.
(arm_record_vdata_transfer_insn): Likewise.
(arm_record_exreg_ld_st_insn): Likewise.
* auto-load.c (execute_script_contents): Likewise.
(print_scripts): Likewise.
* avr-tdep.c (avr_frame_prev_register): Likewise.
(avr_push_dummy_call): Likewise.
* bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise.
* break-catch-throw.c (fetch_probe_arguments): Likewise.
* breakpoint.c (breakpoint_xfer_memory): Likewise.
(breakpoint_init_inferior): Likewise.
(breakpoint_inserted_here_p): Likewise.
(software_breakpoint_inserted_here_p): Likewise.
(hardware_breakpoint_inserted_here_p): Likewise.
(bpstat_what): Likewise.
(break_range_command): Likewise.
(save_breakpoints): Likewise.
* coffread.c (coff_symfile_read): Likewise.
* cris-tdep.c (cris_push_dummy_call): Likewise.
(cris_scan_prologue): Likewise.
(cris_register_size): Likewise.
(_initialize_cris_tdep): Likewise.
* d-exp.y: Likewise.
* dbxread.c (dbx_read_symtab): Likewise.
(process_one_symbol): Likewise.
(coffstab_build_psymtabs): Likewise.
(elfstab_build_psymtabs): Likewise.
* dicos-tdep.c (dicos_init_abi): Likewise.
* disasm.c (do_mixed_source_and_assembly): Likewise.
(gdb_disassembly): Likewise.
* dtrace-probe.c (dtrace_process_dof): Likewise.
* dwarf2read.c (error_check_comp_unit_head): Likewise.
(build_type_psymtabs_1): Likewise.
(skip_one_die): Likewise.
(process_imported_unit_die): Likewise.
(dwarf2_physname): Likewise.
(read_file_scope): Likewise.
(setup_type_unit_groups): Likewise.
(create_dwo_cu_reader): Likewise.
(create_dwo_cu): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(lookup_dwo_unit_in_dwp): Likewise.
(free_dwo_file): Likewise.
(check_producer): Likewise.
(dwarf2_add_typedef): Likewise.
(dwarf2_add_member_fn): Likewise.
(read_unsigned_leb128): Likewise.
(read_signed_leb128): Likewise.
(dwarf2_const_value): Likewise.
(follow_die_sig_1): Likewise.
(dwarf_decode_macro_bytes): Likewise.
* extension.c (restore_active_ext_lang): Likewise.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
* ft32-tdep.c (ft32_analyze_prologue): Likewise.
* gdbtypes.c (lookup_typename): Likewise.
(resolve_dynamic_range): Likewise.
(check_typedef): Likewise.
* h8300-tdep.c (h8300_is_argument_spill): Likewise.
(h8300_gdbarch_init): Likewise.
* hppa-tdep.c (hppa32_push_dummy_call): Likewise.
(hppa_frame_this_id): Likewise.
(_initialize_hppa_tdep): Likewise.
* hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise.
* hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise.
* i386-dicos-tdep.c (i386_dicos_init_abi): Likewise.
* i386-tdep.c (i386_bnd_type): Likewise.
(i386_gdbarch_init): Likewise.
(i386_mpx_bd_base): Likewise.
* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise.
* i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise.
* ia64-tdep.c (examine_prologue): Likewise.
(ia64_frame_cache): Likewise.
(ia64_push_dummy_call): Likewise.
* infcmd.c (finish_command_fsm_async_reply_reason): Likewise.
(default_print_one_register_info): Likewise.
* infrun.c (infrun_thread_ptid_changed): Likewise.
(thread_still_needs_step_over): Likewise.
(stop_all_threads): Likewise.
(restart_threads): Likewise.
(keep_going_stepped_thread): Likewise.
* iq2000-tdep.c (iq2000_scan_prologue): Likewise.
* language.c (language_init_primitive_type_symbols): Likewise.
* linespec.c (add_sal_to_sals): Likewise.
* linux-nat.c (status_callback): Likewise.
(kill_unfollowed_fork_children): Likewise.
(linux_nat_kill): Likewise.
* linux-tdep.c (linux_fill_prpsinfo): Likewise.
* linux-thread-db.c (thread_db_notice_clone): Likewise.
(record_thread): Likewise.
* location.c (string_to_event_location_basic): Likewise.
* m32c-tdep.c (m32c_prev_register): Likewise.
* m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
* m32r-tdep.c (decode_prologue): Likewise.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* machoread.c (macho_symtab_read): Likewise.
(macho_symfile_read): Likewise.
(macho_symfile_offsets): Likewise.
* maint.c (set_per_command_cmd): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
(mi_cmd_stack_list_variables): Likewise.
* mi/mi-main.c (mi_cmd_exec_run): Likewise.
(output_register): Likewise.
(mi_cmd_execute): Likewise.
(mi_cmd_trace_define_variable): Likewise.
(print_variable_or_computed): Likewise.
* minsyms.c (prim_record_minimal_symbol_full): Likewise.
* mn10300-tdep.c (mn10300_frame_prev_register): Likewise.
* msp430-tdep.c (msp430_pseudo_register_write): Likewise.
* mt-tdep.c (mt_registers_info): Likewise.
* nios2-tdep.c (nios2_analyze_prologue): Likewise.
(nios2_push_dummy_call): Likewise.
(nios2_frame_unwind_cache): Likewise.
(nios2_stub_frame_cache): Likewise.
(nios2_stub_frame_sniffer): Likewise.
(nios2_gdbarch_init): Likewise.
* ppc-ravenscar-thread.c: Likewise.
* ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
* python/py-evts.c (add_new_registry): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
(bpfinishpy_detect_out_scope_cb): Likewise.
* python/py-framefilter.c (py_print_value): Likewise.
* python/py-inferior.c (infpy_write_memory): Likewise.
* python/py-infevents.c (create_inferior_call_event_object): Likewise.
* python/py-infthread.c (thpy_get_ptid): Likewise.
* python/py-linetable.c (ltpy_get_pcs_for_line): Likewise.
(ltpy_get_all_source_lines): Likewise.
(ltpy_is_valid): Likewise.
(ltpy_iternext): Likewise.
* python/py-symtab.c (symtab_and_line_to_sal_object): Likewise.
* python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise.
(unwind_infopy_str): Likewise.
* python/py-varobj.c (py_varobj_get_iterator): Likewise.
* ravenscar-thread.c (ravenscar_inferior_created): Likewise.
* rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
* rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
* s390-linux-tdep.c (s390_supply_tdb_regset): Likewise.
(s390_frame_prev_register): Likewise.
(s390_dwarf2_frame_init_reg): Likewise.
(s390_record_vr): Likewise.
(s390_process_record): Likewise.
* score-tdep.c (score_push_dummy_call): Likewise.
(score3_analyze_prologue): Likewise.
* sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
* sh64-tdep.c (sh64_analyze_prologue): Likewise.
(sh64_push_dummy_call): Likewise.
(sh64_extract_return_value): Likewise.
(sh64_do_fp_register): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Likewise.
* solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise.
(darwin_solib_read_all_image_info_addr): Likewise.
* solib-dsbt.c (enable_break): Likewise.
* solib-frv.c (enable_break2): Likewise.
(frv_fdpic_find_canonical_descriptor): Likewise.
* solib-svr4.c (svr4_handle_solib_event): Likewise.
* sparc-tdep.c (sparc_skip_stack_check): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise.
* sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise.
* spu-tdep.c (info_spu_dma_cmdlist): Likewise.
* stack.c (read_frame_local): Likewise.
* symfile.c (symbol_file_add_separate): Likewise.
(remove_symbol_file_command): Likewise.
* symmisc.c (maintenance_print_one_line_table): Likewise.
* symtab.c (symbol_cache_flush): Likewise.
(basic_lookup_transparent_type): Likewise.
(sort_search_symbols_remove_dups): Likewise.
* target.c (target_memory_map): Likewise.
(target_detach): Likewise.
(target_resume): Likewise.
(acquire_fileio_fd): Likewise.
(target_store_registers): Likewise.
* thread.c (print_thread_info_1): Likewise.
* tic6x-tdep.c (tic6x_analyze_prologue): Likewise.
* tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise.
* tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
(tilegx_analyze_prologue): Likewise.
(tilegx_stack_frame_destroyed_p): Likewise.
(tilegx_frame_cache): Likewise.
* tracefile.c (trace_save): Likewise.
* tracepoint.c (encode_actions_and_make_cleanup): Likewise.
(start_tracing): Likewise.
(print_one_static_tracepoint_marker): Likewise.
* tui/tui.c (tui_enable): Likewise.
* valops.c (value_struct_elt_bitpos): Likewise.
(find_overload_match): Likewise.
(find_oload_champ): Likewise.
* value.c (value_contents_copy_raw): Likewise.
* windows-tdep.c (windows_get_tlb_type): Likewise.
* x86-linux-nat.c (x86_linux_enable_btrace): Likewise.
* xcoffread.c (record_minimal_symbol): Likewise.
(scan_xcoff_symtab): Likewise.
* xtensa-tdep.c (execute_code): Likewise.
(xtensa_gdbarch_init): Likewise.
(_initialize_xtensa_tdep): Likewise.
|
|
Give the function a better name (drop "maybe_") and update the header
comment.
gdb/ChangeLog:
* disasm.c (maybe_add_dis_line_entry): Rename to...
(add_dis_line_entry): ...this, and update header comment.
(do_mixed_source_and_assembly): Now use add_dis_line_entry.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This patch fixes C++ build errors like this:
/home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive]
| COREFILTER_HUGETLB_PRIVATE);
^
This is a case of enums used as bit flags. Unlike "regular" enums,
these values are supposed to be or'ed together. However, in C++, the
type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to
an enum variable without a cast. That means that this:
enum foo_flags flags = 0;
if (...)
flags |= FOO_FLAG1;
if (...)
flags |= FOO_FLAG2;
... would have to be written as:
enum foo_flags flags = (enum foo_flags) 0;
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG1);
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG2);
which is ... ugly. Alternatively, we'd have to use an int for the
variable's type, which isn't ideal either.
This patch instead adds an "enum flags" class. "enum flags" are
exactly the enums where the values are bits that are meant to be ORed
together.
This allows writing code like the below, while with raw enums this
would fail to compile without casts to enum type at the assignments to
'f':
enum some_flag
{
flag_val1 = 1 << 1,
flag_val2 = 1 << 2,
flag_val3 = 1 << 3,
flag_val4 = 1 << 4,
};
DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags)
some_flags f = flag_val1 | flag_val2;
f |= flag_val3;
It's also possible to assign literal zero to an enum flags variable
(meaning, no flags), dispensing either adding an awkward explicit "no
value" value to the enumeration or the cast to assignments from 0.
For example:
some_flags f = 0;
f |= flag_val3 | flag_val4;
Note that literal integers other than zero do fail to compile:
some_flags f = 1; // error
C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that
case.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* btrace.h: Include common/enum-flags.h.
(btrace_insn_flags): Define.
(struct btrace_insn) <flags>: Change type.
(btrace_function_flags): Define.
(struct btrace_function) <flags>: Change type.
(btrace_thread_flags): Define.
(struct btrace_thread_info) <flags>: Change type.
* c-exp.y (token_flags): Rename to ...
(token_flag): ... this.
(token_flags): Define.
(struct token) <flags>: Change type.
* common/enum-flags.h: New file.
* compile/compile-c-types.c (convert_qualified): Change type of
'quals' local.
* compile/compile-internal.h: Include "common/enum-flags.h".
(gcc_qualifiers_flags): Define.
* completer.c (enum reg_completer_targets): Rename to ...
(enum reg_completer_target): ... this.
(reg_completer_targets): Define.
(reg_or_group_completer_1): Change type of 'targets' parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Change type
of 'psl_flags' local.
(do_mixed_source_and_assembly): Change type of 'psl_flags' local.
* infrun.c: Include "common/enum-flags.h".
(enum step_over_what): Rename to ...
(enum step_over_what_flag): ... this.
(step_over_what): Change type.
(start_step_over): Change type of 'step_what' local.
(thread_still_needs_step_over): Now returns a step_over_what.
Adjust.
(keep_going_pass_signal): Change type of 'step_what' local.
* linux-tdep.c: Include "common/enum-flags.h".
(enum filterflags): Rename to ...
(enum filter_flag): ... this.
(filter_flags): Define.
(dump_mapping_p): Change type of 'filterflags' parameter.
(linux_find_memory_regions_full): Change type of 'filterflags'
local.
(linux_find_memory_regions_full): Pass the address of an unsigned
int to sscanf instead of the address of an enum.
* record-btrace.c (btrace_print_lines): Change type of local
'psl_flags'.
(btrace_call_history): Replace 'flags' parameter
with 'int_flags' parameter. Adjust.
(record_btrace_call_history, record_btrace_call_history_range)
(record_btrace_call_history_from): Rename 'flags' parameter to
'int_flags'. Use record_print_flags.
* record.h: Include "common/enum-flags.h".
(record_print_flags): Define.
* source.c: Include "common/enum-flags.h".
(print_source_lines_base, print_source_lines): Change type of
flags parameter.
* symtab.h: Include "common/enum-flags.h".
(enum print_source_lines_flags): Rename to ...
(enum print_source_lines_flag): ... this.
(print_source_lines_flags): Define.
(print_source_lines): Change prototype.
|
|
The "record instruction-history" command prints for each instruction in
addition to the instruction's disassembly:
- the instruction number in the recorded execution trace
- a '?' before the instruction if it was executed speculatively
To allow the "record instruction-history" command to use GDB's disassembly
infrastructure, we extend gdb_pretty_print_insn to optionally print those
additional fields and export the function.
Add a new struct disasm_insn to add additional fields describing the
to-be-disassembled instruction. The additional fields are:
number an optional instruction number, zero if omitted.
is_speculative a predicate saying whether the instruction was
executed speculatively.
If non-zero, the instruction number is printed first. It will also appear
as a new optional field "insn-number" in MI. The field will be present if
insn_num is non-zero.
If is_speculative is set, speculative execution will be indicated by a "?"
following the new instruction number field. Unless the PC is omitted, it
will overwrite the first byte of the PC prefix. It will appear as a new
optional field "is-speculative" in MI. The field will contain "?" and will
be present if is_speculative is set.
The speculative execution indication is guarded by a new flag
DISASSEMBLY_SPECULATION.
Replace the PC parameter of gdb_pretty_print_insn with a pointer to the above
struct. GDB's "disassemble" command does not use the new fields.
gdb/
* disasm.h (DISASSEMBLY_SPECULATION): New.
(struct disasm_insn): New.
(gdb_pretty_print_insn): New.
* disasm.c (gdb_pretty_print_insn): Replace parameter PC with INSN.
Update users. Print instruction number and indicate speculative
execution, if requested.
|
|
Split disasm.c's dump_insn into two parts:
- print a single instruction
- loop over the specified address range
The first part will be refined in subsequent patches so it can be reused.
gdb/
* disasm.c (dump_insns): Split into this and ...
(gdb_pretty_print_insn): ... this.
|
|
Years ago, these functions used to return errno/EIO. Later, through a
series of changes that intended to remove native/remote differences,
they ended up returning a target_xfer_status in disguise.
Unlike target_xfer_partial&co, the point of target_read_memory&co is
to either fully succeed or fail. On error, they always return
TARGET_XFER_E_IO. So there's no real point in casting the return of
target_read_memory to a target_xfer_status to pass it to memory_error.
Instead, it results in clearer code to simply decouple
target_read_memory&co's return from target_xfer_status.
This fixes build errors like this in C++ mode:
../../src/gdb/corefile.c: In function ‘void read_stack(CORE_ADDR, gdb_byte*, ssize_t)’:
../../src/gdb/corefile.c:276:34: error: invalid conversion from ‘int’ to ‘target_xfer_status’ [-fpermissive]
memory_error (status, memaddr);
^
../../src/gdb/corefile.c:216:1: error: initializing argument 1 of ‘void memory_error(target_xfer_status, CORE_ADDR)’ [-fpermissive]
gdb/ChangeLog:
2015-10-27 Pedro Alves <palves@redhat.com>
* alpha-tdep.c (alpha_read_insn): Always pass TARGET_XFER_E_IO to
memory_error. Rename local 'status' to 'res'.
* c-lang.c (c_get_string): Always pass TARGET_XFER_E_IO to
memory_error.
* corefile.c (read_stack, read_code, write_memory): Always pass
TARGET_XFER_E_IO to memory_error.
* disasm.c (dis_asm_memory_error): Always pass TARGET_XFER_E_IO to
memory_error. Rename parameter 'status' to 'err'.
(dump_insns): Rename local 'status' to 'err'.
* mips-tdep.c (mips_fetch_instruction): Rename parameter 'statusp'
to 'errp'. Rename local 'status' to 'err'. Always pass
TARGET_XFER_E_IO to memory_error.
(mips_breakpoint_from_pc): Rename local 'status' to 'err'.
* target.c (target_read_memory, target_read_raw_memory)
(target_read_stack, target_read_code, target_write_memory)
(target_write_raw_memory): Return -1 on error instead of
TARGET_XFER_E_IO.
* valprint.c (val_print_string): Rename local 'errcode' to 'err'.
Always pass TARGET_XFER_E_IO to memory_error. Update comment.
|
|
Note: I needed to split this patch in two, otherwise it's too big for
the mailing list.
This patch adds explicit casts to situations where a void pointer is
assigned to a pointer to the "real" type. Building in C++ mode requires
those assignments to use an explicit cast. This includes, for example:
- callback arguments (cleanups, comparison functions, ...)
- data attached to some object (objfile, program space, etc) in the form
of a void pointer
- "user data" passed to some function
This patch comes from the commit "(mostly) auto-generated patch to insert
casts needed for C++", taken from Pedro's C++ branch.
Only files built on x86 with --enable-targets=all are modified, so the
native files for other arches will need to be dealt with separately.
I built-tested this with --enable-targets=all and reg-tested. To my
surprise, a test case (selftest.exp) had to be adjusted.
Here's the ChangeLog entry. Again, this was relatively quick to make
despite the length, thanks to David Malcom's script, although I don't
believe it's very useful information in that particular case...
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_make_prologue_cache): Add cast(s).
(aarch64_make_stub_cache): Likewise.
(value_of_aarch64_user_reg): Likewise.
* ada-lang.c (ada_inferior_data_cleanup): Likewise.
(get_ada_inferior_data): Likewise.
(get_ada_pspace_data): Likewise.
(ada_pspace_data_cleanup): Likewise.
(ada_complete_symbol_matcher): Likewise.
(ada_exc_search_name_matches): Likewise.
* ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
(get_ada_tasks_inferior_data): Likewise.
* addrmap.c (addrmap_mutable_foreach_worker): Likewise.
(splay_obstack_alloc): Likewise.
(splay_obstack_free): Likewise.
* alpha-linux-tdep.c (alpha_linux_supply_gregset): Likewise.
(alpha_linux_collect_gregset): Likewise.
(alpha_linux_supply_fpregset): Likewise.
(alpha_linux_collect_fpregset): Likewise.
* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise.
* alpha-tdep.c (alpha_lds): Likewise.
(alpha_sts): Likewise.
(alpha_sigtramp_frame_unwind_cache): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_supply_int_regs): Likewise.
(alpha_fill_int_regs): Likewise.
(alpha_supply_fp_regs): Likewise.
(alpha_fill_fp_regs): Likewise.
* alphanbsd-tdep.c (alphanbsd_supply_fpregset): Likewise.
(alphanbsd_aout_supply_gregset): Likewise.
(alphanbsd_supply_gregset): Likewise.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
(amd64_x32_linux_init_abi): Likewise.
* amd64-nat.c (amd64_supply_native_gregset): Likewise.
(amd64_collect_native_gregset): Likewise.
* amd64-tdep.c (amd64_frame_cache): Likewise.
(amd64_sigtramp_frame_cache): Likewise.
(amd64_epilogue_frame_cache): Likewise.
(amd64_supply_fxsave): Likewise.
(amd64_supply_xsave): Likewise.
(amd64_collect_fxsave): Likewise.
(amd64_collect_xsave): Likewise.
* amd64-windows-tdep.c (amd64_windows_frame_cache): Likewise.
* amd64obsd-tdep.c (amd64obsd_trapframe_cache): Likewise.
* arm-linux-tdep.c (arm_linux_supply_gregset): Likewise.
(arm_linux_collect_gregset): Likewise.
(arm_linux_supply_nwfpe): Likewise.
(arm_linux_collect_nwfpe): Likewise.
(arm_linux_supply_vfp): Likewise.
(arm_linux_collect_vfp): Likewise.
* arm-tdep.c (arm_find_mapping_symbol): Likewise.
(arm_prologue_unwind_stop_reason): Likewise.
(arm_prologue_this_id): Likewise.
(arm_prologue_prev_register): Likewise.
(arm_exidx_data_free): Likewise.
(arm_find_exidx_entry): Likewise.
(arm_stub_this_id): Likewise.
(arm_m_exception_this_id): Likewise.
(arm_m_exception_prev_register): Likewise.
(arm_normal_frame_base): Likewise.
(gdb_print_insn_arm): Likewise.
(arm_objfile_data_free): Likewise.
(arm_record_special_symbol): Likewise.
(value_of_arm_user_reg): Likewise.
* armbsd-tdep.c (armbsd_supply_fpregset): Likewise.
(armbsd_supply_gregset): Likewise.
* auto-load.c (auto_load_pspace_data_cleanup): Likewise.
(get_auto_load_pspace_data): Likewise.
(hash_loaded_script_entry): Likewise.
(eq_loaded_script_entry): Likewise.
(clear_section_scripts): Likewise.
(collect_matching_scripts): Likewise.
* auxv.c (auxv_inferior_data_cleanup): Likewise.
(get_auxv_inferior_data): Likewise.
* avr-tdep.c (avr_frame_unwind_cache): Likewise.
* ax-general.c (do_free_agent_expr_cleanup): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
(target_bfd_xclose): Likewise.
(target_bfd_get_section_table): Likewise.
* bfin-tdep.c (bfin_frame_cache): Likewise.
* block.c (find_block_in_blockvector): Likewise.
(call_site_for_pc): Likewise.
(block_find_non_opaque_type_preferred): Likewise.
* break-catch-sig.c (signal_catchpoint_insert_location): Likewise.
(signal_catchpoint_remove_location): Likewise.
(signal_catchpoint_breakpoint_hit): Likewise.
(signal_catchpoint_print_one): Likewise.
(signal_catchpoint_print_mention): Likewise.
(signal_catchpoint_print_recreate): Likewise.
* break-catch-syscall.c (get_catch_syscall_inferior_data): Likewise.
* breakpoint.c (do_cleanup_counted_command_line): Likewise.
(bp_location_compare_addrs): Likewise.
(get_first_locp_gte_addr): Likewise.
(check_tracepoint_command): Likewise.
(do_map_commands_command): Likewise.
(get_breakpoint_objfile_data): Likewise.
(free_breakpoint_probes): Likewise.
(do_captured_breakpoint_query): Likewise.
(compare_breakpoints): Likewise.
(bp_location_compare): Likewise.
(bpstat_remove_breakpoint_callback): Likewise.
(do_delete_breakpoint_cleanup): Likewise.
* bsd-uthread.c (bsd_uthread_set_supply_uthread): Likewise.
(bsd_uthread_set_collect_uthread): Likewise.
(bsd_uthread_activate): Likewise.
(bsd_uthread_fetch_registers): Likewise.
(bsd_uthread_store_registers): Likewise.
* btrace.c (check_xml_btrace_version): Likewise.
(parse_xml_btrace_block): Likewise.
(parse_xml_btrace_pt_config_cpu): Likewise.
(parse_xml_btrace_pt_raw): Likewise.
(parse_xml_btrace_pt): Likewise.
(parse_xml_btrace_conf_bts): Likewise.
(parse_xml_btrace_conf_pt): Likewise.
(do_btrace_data_cleanup): Likewise.
* c-typeprint.c (find_typedef_for_canonicalize): Likewise.
* charset.c (cleanup_iconv): Likewise.
(do_cleanup_iterator): Likewise.
* cli-out.c (cli_uiout_dtor): Likewise.
(cli_table_begin): Likewise.
(cli_table_body): Likewise.
(cli_table_end): Likewise.
(cli_table_header): Likewise.
(cli_begin): Likewise.
(cli_end): Likewise.
(cli_field_int): Likewise.
(cli_field_skip): Likewise.
(cli_field_string): Likewise.
(cli_field_fmt): Likewise.
(cli_spaces): Likewise.
(cli_text): Likewise.
(cli_message): Likewise.
(cli_wrap_hint): Likewise.
(cli_flush): Likewise.
(cli_redirect): Likewise.
(out_field_fmt): Likewise.
(field_separator): Likewise.
(cli_out_set_stream): Likewise.
* cli/cli-cmds.c (compare_symtabs): Likewise.
* cli/cli-dump.c (call_dump_func): Likewise.
(restore_section_callback): Likewise.
* cli/cli-script.c (clear_hook_in_cleanup): Likewise.
(do_restore_user_call_depth): Likewise.
(do_free_command_lines_cleanup): Likewise.
* coff-pe-read.c (get_section_vmas): Likewise.
(pe_as16): Likewise.
(pe_as32): Likewise.
* coffread.c (coff_symfile_read): Likewise.
* common/agent.c (agent_look_up_symbols): Likewise.
* common/filestuff.c (do_close_cleanup): Likewise.
* common/format.c (free_format_pieces_cleanup): Likewise.
* common/vec.c (vec_o_reserve): Likewise.
* compile/compile-c-support.c (print_one_macro): Likewise.
* compile/compile-c-symbols.c (hash_symbol_error): Likewise.
(eq_symbol_error): Likewise.
(del_symbol_error): Likewise.
(error_symbol_once): Likewise.
(gcc_convert_symbol): Likewise.
(gcc_symbol_address): Likewise.
(hash_symname): Likewise.
(eq_symname): Likewise.
* compile/compile-c-types.c (hash_type_map_instance): Likewise.
(eq_type_map_instance): Likewise.
(insert_type): Likewise.
(convert_type): Likewise.
* compile/compile-object-load.c (munmap_listp_free_cleanup): Likewise.
(setup_sections): Likewise.
(link_hash_table_free): Likewise.
(copy_sections): Likewise.
* compile/compile-object-run.c (do_module_cleanup): Likewise.
* compile/compile.c (compile_print_value): Likewise.
(do_rmdir): Likewise.
(cleanup_compile_instance): Likewise.
(cleanup_unlink_file): Likewise.
* completer.c (free_completion_tracker): Likewise.
* corelow.c (add_to_spuid_list): Likewise.
* cp-namespace.c (reset_directive_searched): Likewise.
* cp-support.c (reset_directive_searched): Likewise.
* cris-tdep.c (cris_sigtramp_frame_unwind_cache): Likewise.
(cris_frame_unwind_cache): Likewise.
* d-lang.c (builtin_d_type): Likewise.
* d-namespace.c (reset_directive_searched): Likewise.
* dbxread.c (dbx_free_symfile_info): Likewise.
(do_free_bincl_list_cleanup): Likewise.
* disasm.c (hash_dis_line_entry): Likewise.
(eq_dis_line_entry): Likewise.
(dis_asm_print_address): Likewise.
(fprintf_disasm): Likewise.
(do_ui_file_delete): Likewise.
* doublest.c (convert_floatformat_to_doublest): Likewise.
* dummy-frame.c (pop_dummy_frame_bpt): Likewise.
(dummy_frame_prev_register): Likewise.
(dummy_frame_this_id): Likewise.
* dwarf2-frame-tailcall.c (cache_hash): Likewise.
(cache_eq): Likewise.
(cache_find): Likewise.
(tailcall_frame_this_id): Likewise.
(dwarf2_tailcall_prev_register_first): Likewise.
(tailcall_frame_prev_register): Likewise.
(tailcall_frame_dealloc_cache): Likewise.
(tailcall_frame_prev_arch): Likewise.
* dwarf2-frame.c (dwarf2_frame_state_free): Likewise.
(dwarf2_frame_set_init_reg): Likewise.
(dwarf2_frame_init_reg): Likewise.
(dwarf2_frame_set_signal_frame_p): Likewise.
(dwarf2_frame_signal_frame_p): Likewise.
(dwarf2_frame_set_adjust_regnum): Likewise.
(dwarf2_frame_adjust_regnum): Likewise.
(clear_pointer_cleanup): Likewise.
(dwarf2_frame_cache): Likewise.
(find_cie): Likewise.
(dwarf2_frame_find_fde): Likewise.
* dwarf2expr.c (dwarf_expr_address_type): Likewise.
(free_dwarf_expr_context_cleanup): Likewise.
* dwarf2loc.c (locexpr_find_frame_base_location): Likewise.
(locexpr_get_frame_base): Likewise.
(loclist_find_frame_base_location): Likewise.
(loclist_get_frame_base): Likewise.
(dwarf_expr_dwarf_call): Likewise.
(dwarf_expr_get_base_type): Likewise.
(dwarf_expr_push_dwarf_reg_entry_value): Likewise.
(dwarf_expr_get_obj_addr): Likewise.
(entry_data_value_coerce_ref): Likewise.
(entry_data_value_copy_closure): Likewise.
(entry_data_value_free_closure): Likewise.
(get_frame_address_in_block_wrapper): Likewise.
(dwarf2_evaluate_property): Likewise.
(dwarf2_compile_property_to_c): Likewise.
(needs_frame_read_addr_from_reg): Likewise.
(needs_frame_get_reg_value): Likewise.
(needs_frame_frame_base): Likewise.
(needs_frame_frame_cfa): Likewise.
(needs_frame_tls_address): Likewise.
(needs_frame_dwarf_call): Likewise.
(needs_dwarf_reg_entry_value): Likewise.
(get_ax_pc): Likewise.
(locexpr_read_variable): Likewise.
(locexpr_read_variable_at_entry): Likewise.
(locexpr_read_needs_frame): Likewise.
(locexpr_describe_location): Likewise.
(locexpr_tracepoint_var_ref): Likewise.
(locexpr_generate_c_location): Likewise.
(loclist_read_variable): Likewise.
(loclist_read_variable_at_entry): Likewise.
(loclist_describe_location): Likewise.
(loclist_tracepoint_var_ref): Likewise.
(loclist_generate_c_location): Likewise.
* dwarf2read.c (line_header_hash_voidp): Likewise.
(line_header_eq_voidp): Likewise.
(dwarf2_has_info): Likewise.
(dwarf2_get_section_info): Likewise.
(locate_dwz_sections): Likewise.
(hash_file_name_entry): Likewise.
(eq_file_name_entry): Likewise.
(delete_file_name_entry): Likewise.
(dw2_setup): Likewise.
(dw2_get_file_names_reader): Likewise.
(dw2_find_pc_sect_compunit_symtab): Likewise.
(hash_signatured_type): Likewise.
(eq_signatured_type): Likewise.
(add_signatured_type_cu_to_table): Likewise.
(create_debug_types_hash_table): Likewise.
(lookup_dwo_signatured_type): Likewise.
(lookup_dwp_signatured_type): Likewise.
(lookup_signatured_type): Likewise.
(hash_type_unit_group): Likewise.
(eq_type_unit_group): Likewise.
(get_type_unit_group): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(sort_tu_by_abbrev_offset): Likewise.
(process_skeletonless_type_unit): Likewise.
(psymtabs_addrmap_cleanup): Likewise.
(dwarf2_read_symtab): Likewise.
(psymtab_to_symtab_1): Likewise.
(die_hash): Likewise.
(die_eq): Likewise.
(load_full_comp_unit_reader): Likewise.
(reset_die_in_process): Likewise.
(free_cu_line_header): Likewise.
(handle_DW_AT_stmt_list): Likewise.
(hash_dwo_file): Likewise.
(eq_dwo_file): Likewise.
(hash_dwo_unit): Likewise.
(eq_dwo_unit): Likewise.
(create_dwo_cu_reader): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(lookup_dwo_unit_in_dwp): Likewise.
(dwarf2_locate_dwo_sections): Likewise.
(dwarf2_locate_common_dwp_sections): Likewise.
(dwarf2_locate_v2_dwp_sections): Likewise.
(hash_dwp_loaded_cutus): Likewise.
(eq_dwp_loaded_cutus): Likewise.
(lookup_dwo_cutu): Likewise.
(abbrev_table_free_cleanup): Likewise.
(dwarf2_free_abbrev_table): Likewise.
(find_partial_die_in_comp_unit): Likewise.
(free_line_header_voidp): Likewise.
(follow_die_offset): Likewise.
(follow_die_sig_1): Likewise.
(free_heap_comp_unit): Likewise.
(free_stack_comp_unit): Likewise.
(dwarf2_free_objfile): Likewise.
(per_cu_offset_and_type_hash): Likewise.
(per_cu_offset_and_type_eq): Likewise.
(get_die_type_at_offset): Likewise.
(partial_die_hash): Likewise.
(partial_die_eq): Likewise.
(dwarf2_per_objfile_free): Likewise.
(hash_strtab_entry): Likewise.
(eq_strtab_entry): Likewise.
(add_string): Likewise.
(hash_symtab_entry): Likewise.
(eq_symtab_entry): Likewise.
(delete_symtab_entry): Likewise.
(cleanup_mapped_symtab): Likewise.
(add_indices_to_cpool): Likewise.
(hash_psymtab_cu_index): Likewise.
(eq_psymtab_cu_index): Likewise.
(add_address_entry_worker): Likewise.
(unlink_if_set): Likewise.
(write_one_signatured_type): Likewise.
(save_gdb_index_command): Likewise.
* elfread.c (elf_symtab_read): Likewise.
(elf_gnu_ifunc_cache_hash): Likewise.
(elf_gnu_ifunc_cache_eq): Likewise.
(elf_gnu_ifunc_record_cache): Likewise.
(elf_gnu_ifunc_resolve_by_cache): Likewise.
(elf_get_probes): Likewise.
(probe_key_free): Likewise.
* f-lang.c (builtin_f_type): Likewise.
* frame-base.c (frame_base_append_sniffer): Likewise.
(frame_base_set_default): Likewise.
(frame_base_find_by_frame): Likewise.
* frame-unwind.c (frame_unwind_prepend_unwinder): Likewise.
(frame_unwind_append_unwinder): Likewise.
(frame_unwind_find_by_frame): Likewise.
* frame.c (frame_addr_hash): Likewise.
(frame_addr_hash_eq): Likewise.
(frame_stash_find): Likewise.
(do_frame_register_read): Likewise.
(unwind_to_current_frame): Likewise.
(frame_cleanup_after_sniffer): Likewise.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
* frv-tdep.c (frv_frame_unwind_cache): Likewise.
* ft32-tdep.c (ft32_frame_cache): Likewise.
* gcore.c (do_bfd_delete_cleanup): Likewise.
(gcore_create_callback): Likewise.
* gdb_bfd.c (hash_bfd): Likewise.
(eq_bfd): Likewise.
(gdb_bfd_open): Likewise.
(free_one_bfd_section): Likewise.
(gdb_bfd_ref): Likewise.
(gdb_bfd_unref): Likewise.
(get_section_descriptor): Likewise.
(gdb_bfd_map_section): Likewise.
(gdb_bfd_crc): Likewise.
(gdb_bfd_mark_parent): Likewise.
(gdb_bfd_record_inclusion): Likewise.
(gdb_bfd_requires_relocations): Likewise.
(print_one_bfd): Likewise.
* gdbtypes.c (type_pair_hash): Likewise.
(type_pair_eq): Likewise.
(builtin_type): Likewise.
(objfile_type): Likewise.
* gnu-v3-abi.c (vtable_ptrdiff_type): Likewise.
(vtable_address_point_offset): Likewise.
(gnuv3_get_vtable): Likewise.
(hash_value_and_voffset): Likewise.
(eq_value_and_voffset): Likewise.
(compare_value_and_voffset): Likewise.
(compute_vtable_size): Likewise.
(gnuv3_get_typeid_type): Likewise.
* go-lang.c (builtin_go_type): Likewise.
* guile/scm-block.c (bkscm_hash_block_smob): Likewise.
(bkscm_eq_block_smob): Likewise.
(bkscm_objfile_block_map): Likewise.
(bkscm_del_objfile_blocks): Likewise.
* guile/scm-breakpoint.c (bpscm_build_bp_list): Likewise.
* guile/scm-disasm.c (gdbscm_disasm_read_memory_worker): Likewise.
(gdbscm_disasm_print_address): Likewise.
* guile/scm-frame.c (frscm_hash_frame_smob): Likewise.
(frscm_eq_frame_smob): Likewise.
(frscm_inferior_frame_map): Likewise.
(frscm_del_inferior_frames): Likewise.
* guile/scm-gsmob.c (gdbscm_add_objfile_ref): Likewise.
* guile/scm-objfile.c (ofscm_handle_objfile_deleted): Likewise.
(ofscm_objfile_smob_from_objfile): Likewise.
* guile/scm-ports.c (ioscm_write): Likewise.
(ioscm_file_port_delete): Likewise.
(ioscm_file_port_rewind): Likewise.
(ioscm_file_port_put): Likewise.
(ioscm_file_port_write): Likewise.
* guile/scm-progspace.c (psscm_handle_pspace_deleted): Likewise.
(psscm_pspace_smob_from_pspace): Likewise.
* guile/scm-safe-call.c (scscm_recording_pre_unwind_handler): Likewise.
(scscm_recording_unwind_handler): Likewise.
(gdbscm_with_catch): Likewise.
(scscm_call_0_body): Likewise.
(scscm_call_1_body): Likewise.
(scscm_call_2_body): Likewise.
(scscm_call_3_body): Likewise.
(scscm_call_4_body): Likewise.
(scscm_apply_1_body): Likewise.
(scscm_eval_scheme_string): Likewise.
(gdbscm_safe_eval_string): Likewise.
(scscm_source_scheme_script): Likewise.
(gdbscm_safe_source_script): Likewise.
* guile/scm-string.c (gdbscm_call_scm_to_stringn): Likewise.
(gdbscm_call_scm_from_stringn): Likewise.
* guile/scm-symbol.c (syscm_hash_symbol_smob): Likewise.
(syscm_eq_symbol_smob): Likewise.
(syscm_get_symbol_map): Likewise.
(syscm_del_objfile_symbols): Likewise.
* guile/scm-symtab.c (stscm_hash_symtab_smob): Likewise.
(stscm_eq_symtab_smob): Likewise.
(stscm_objfile_symtab_map): Likewise.
(stscm_del_objfile_symtabs): Likewise.
* guile/scm-type.c (tyscm_hash_type_smob): Likewise.
(tyscm_eq_type_smob): Likewise.
(tyscm_type_map): Likewise.
(tyscm_copy_type_recursive): Likewise.
(save_objfile_types): Likewise.
* guile/scm-utils.c (extract_arg): Likewise.
* h8300-tdep.c (h8300_frame_cache): Likewise.
* hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind_cache): Likewise.
* hppa-tdep.c (compare_unwind_entries): Likewise.
(find_unwind_entry): Likewise.
(hppa_frame_cache): Likewise.
(hppa_stub_frame_unwind_cache): Likewise.
* hppanbsd-tdep.c (hppanbsd_supply_gregset): Likewise.
* hppaobsd-tdep.c (hppaobsd_supply_gregset): Likewise.
(hppaobsd_supply_fpregset): Likewise.
* i386-cygwin-tdep.c (core_process_module_section): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_frame_cache): Likewise.
(i386_epilogue_frame_cache): Likewise.
(i386_sigtramp_frame_cache): Likewise.
(i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_gdbarch_init): Likewise.
* i386obsd-tdep.c (i386obsd_aout_supply_regset): Likewise.
(i386obsd_trapframe_cache): Likewise.
* i387-tdep.c (i387_supply_fsave): Likewise.
(i387_collect_fsave): Likewise.
(i387_supply_fxsave): Likewise.
(i387_collect_fxsave): Likewise.
(i387_supply_xsave): Likewise.
(i387_collect_xsave): Likewise.
* ia64-tdep.c (ia64_frame_cache): Likewise.
(ia64_sigtramp_frame_cache): Likewise.
* infcmd.c (attach_command_continuation): Likewise.
(attach_command_continuation_free_args): Likewise.
* inferior.c (restore_inferior): Likewise.
(delete_thread_of_inferior): Likewise.
* inflow.c (inflow_inferior_data_cleanup): Likewise.
(get_inflow_inferior_data): Likewise.
(inflow_inferior_exit): Likewise.
* infrun.c (displaced_step_clear_cleanup): Likewise.
(restore_current_uiout_cleanup): Likewise.
(release_stop_context_cleanup): Likewise.
(do_restore_infcall_suspend_state_cleanup): Likewise.
(do_restore_infcall_control_state_cleanup): Likewise.
(restore_inferior_ptid): Likewise.
* inline-frame.c (block_starting_point_at): Likewise.
* iq2000-tdep.c (iq2000_frame_cache): Likewise.
* jit.c (get_jit_objfile_data): Likewise.
(get_jit_program_space_data): Likewise.
(jit_object_close_impl): Likewise.
(jit_find_objf_with_entry_addr): Likewise.
(jit_breakpoint_deleted): Likewise.
(jit_unwind_reg_set_impl): Likewise.
(jit_unwind_reg_get_impl): Likewise.
(jit_dealloc_cache): Likewise.
(jit_frame_sniffer): Likewise.
(jit_frame_prev_register): Likewise.
(jit_prepend_unwinder): Likewise.
(jit_inferior_exit_hook): Likewise.
(free_objfile_data): Likewise.
* jv-lang.c (jv_per_objfile_free): Likewise.
(get_dynamics_objfile): Likewise.
(get_java_class_symtab): Likewise.
(builtin_java_type): Likewise.
* language.c (language_string_char_type): Likewise.
(language_bool_type): Likewise.
(language_lookup_primitive_type): Likewise.
(language_lookup_primitive_type_as_symbol): Likewise.
* linespec.c (hash_address_entry): Likewise.
(eq_address_entry): Likewise.
(iterate_inline_only): Likewise.
(iterate_name_matcher): Likewise.
(decode_line_2_compare_items): Likewise.
(collect_one_symbol): Likewise.
(compare_symbols): Likewise.
(compare_msymbols): Likewise.
(add_symtabs_to_list): Likewise.
(collect_symbols): Likewise.
(compare_msyms): Likewise.
(add_minsym): Likewise.
(cleanup_linespec_result): Likewise.
* linux-fork.c (inferior_call_waitpid_cleanup): Likewise.
* linux-nat.c (delete_lwp_cleanup): Likewise.
(count_events_callback): Likewise.
(select_event_lwp_callback): Likewise.
(resume_stopped_resumed_lwps): Likewise.
* linux-tdep.c (get_linux_gdbarch_data): Likewise.
(invalidate_linux_cache_inf): Likewise.
(get_linux_inferior_data): Likewise.
(linux_find_memory_regions_thunk): Likewise.
(linux_make_mappings_callback): Likewise.
(linux_corefile_thread_callback): Likewise.
(find_mapping_size): Likewise.
* linux-thread-db.c (find_new_threads_callback): Likewise.
* lm32-tdep.c (lm32_frame_cache): Likewise.
* m2-lang.c (builtin_m2_type): Likewise.
* m32c-tdep.c (m32c_analyze_frame_prologue): Likewise.
* m32r-linux-tdep.c (m32r_linux_sigtramp_frame_cache): Likewise.
(m32r_linux_supply_gregset): Likewise.
(m32r_linux_collect_gregset): Likewise.
* m32r-tdep.c (m32r_frame_unwind_cache): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
* m68k-tdep.c (m68k_frame_cache): Likewise.
* m68kbsd-tdep.c (m68kbsd_supply_fpregset): Likewise.
(m68kbsd_supply_gregset): Likewise.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* m88k-tdep.c (m88k_frame_cache): Likewise.
(m88k_supply_gregset): Likewise.
gdb/gdbserver/ChangeLog:
* dll.c (match_dll): Add cast(s).
(unloaded_dll): Likewise.
* linux-low.c (second_thread_of_pid_p): Likewise.
(delete_lwp_callback): Likewise.
(count_events_callback): Likewise.
(select_event_lwp_callback): Likewise.
(linux_set_resume_request): Likewise.
* server.c (accumulate_file_name_length): Likewise.
(emit_dll_description): Likewise.
(handle_qxfer_threads_worker): Likewise.
(visit_actioned_threads): Likewise.
* thread-db.c (any_thread_of): Likewise.
* tracepoint.c (same_process_p): Likewise.
(match_blocktype): Likewise.
(build_traceframe_info_xml): Likewise.
gdb/testsuite/ChangeLog:
* gdb.gdb/selftest.exp (do_steps_and_nexts): Adjust expected
source line.
|
|
The "source centric" /m option to the disassemble command is often
unhelpful, e.g., in the presence of optimized code.
This patch adds a /s modifier that is better.
For one, /m only prints instructions from the originating source file,
leaving out instructions from e.g., inlined functions from other files.
gdb/ChangeLog:
PR gdb/11833
* NEWS: Document new /s modifier for the disassemble command.
* cli/cli-cmds.c (disassemble_command): Add support for /s.
(_initialize_cli_cmds): Update online docs of disassemble command.
* disasm.c: #include "source.h".
(struct deprecated_dis_line_entry): Renamed from dis_line_entry.
All uses updated.
(dis_line_entry): New struct.
(hash_dis_line_entry, eq_dis_line_entry): New functions.
(allocate_dis_line_table): New functions.
(maybe_add_dis_line_entry, line_has_code_p): New functions.
(dump_insns): New arg end_pc. All callers updated.
(do_mixed_source_and_assembly_deprecated): Renamed from
do_mixed_source_and_assembly. All callers updated.
(do_mixed_source_and_assembly): New function.
(gdb_disassembly): Handle /s (DISASSEMBLY_SOURCE).
* disasm.h (DISASSEMBLY_SOURCE_DEPRECATED): Renamed from
DISASSEMBLY_SOURCE. All uses updated.
(DISASSEMBLY_SOURCE): New macro.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): New modes 4,5.
gdb/doc/ChangeLog:
* gdb.texinfo (Machine Code): Update docs for mixed source/assembly
disassembly.
(GDB/MI Data Manipulation): Update docs for new disassembly modes.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-disassemble.exp: Update.
* gdb.base/disasm-optim.S: New file.
* gdb.base/disasm-optim.c: New file.
* gdb.base/disasm-optim.h: New file.
* gdb.base/disasm-optim.exp: New file.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
gdb/ChangeLog:
* symtab.h (SYMTAB_LINETABLE): Renamed from LINETABLE. All uses
updated.
|
|
Basically the problem is that "symtab" is ambiguous.
Is it the primary symtab (where we canonically think of
blockvectors as being stored) or is it for a specific file
(where each file's line table is stored) ?
gdb_disassembly wants the symtab that contains the line table
but is instead getting the primary symtab.
gdb/ChangeLog:
PR symtab/17559
* symtab.c (find_pc_line_symtab): New function.
* symtab.h (find_pc_line_symtab): Declare.
* disasm.c (gdb_disassembly): Call find_pc_line_symtab instead of
find_pc_symtab.
* tui/tui-disasm.c (tui_set_disassem_content): Ditto.
* tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Ditto.
* tui/tui-source.c (tui_vertical_source_scroll): Ditto.
* tui/tui-win.c (make_visible_with_new_height): Ditto.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Ditto.
(tui_display_main): Call find_pc_line_symtab instead of find_pc_line.
gdb/testsuite/ChangeLog:
PR symtab/17559
* gdb.base/line-symtabs.exp: New file.
* gdb.base/line-symtabs.c: New file.
* gdb.base/line-symtabs.h: New file.
|
|
This commit includes string.h in common-defs.h and removes all other
inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include string.h.
* aarch64-tdep.c: Do not include string.h.
* ada-exp.y: Likewise.
* ada-lang.c: Likewise.
* ada-lex.l: Likewise.
* ada-typeprint.c: Likewise.
* ada-valprint.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alpha-nat.c: Likewise.
* alpha-osf1-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-dicos-tdep.c: Likewise.
* amd64-linux-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-sol2-tdep.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-linux-nat.c: Likewise.
* arm-linux-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* arm-wince-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* armnbsd-nat.c: Likewise.
* armnbsd-tdep.c: Likewise.
* armobsd-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* ax-gdb.c: Likewise.
* ax-general.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* breakpoint.c: Likewise.
* build-id.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* c-typeprint.c: Likewise.
* c-valprint.c: Likewise.
* charset.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-setshow.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/agent.c: Likewise.
* common/buffer.c: Likewise.
* common/buffer.h: Likewise.
* common/common-utils.c: Likewise.
* common/filestuff.c: Likewise.
* common/filestuff.c: Likewise.
* common/format.c: Likewise.
* common/print-utils.c: Likewise.
* common/rsp-low.c: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* common/xml-utils.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* cris-tdep.c: Likewise.
* d-exp.y: Likewise.
* darwin-nat.c: Likewise.
* dbxread.c: Likewise.
* dcache.c: Likewise.
* demangle.c: Likewise.
* dicos-tdep.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* elfread.c: Likewise.
* environ.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* exec.c: Likewise.
* expprint.c: Likewise.
* f-exp.y: Likewise.
* f-lang.c: Likewise.
* f-typeprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findcmd.c: Likewise.
* findvar.c: Likewise.
* fork-child.c: Likewise.
* frame.c: Likewise.
* frv-linux-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* gdb.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-exp.y: Likewise.
* go-lang.c: Likewise.
* go32-nat.c: Likewise.
* guile/guile.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* hppa-linux-nat.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-cygwin-tdep.c: Likewise.
* i386-dicos-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-sol2-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-linux-nat.c: Likewise.
* inf-child.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* iq2000-tdep.c: Likewise.
* irix5-nat.c: Likewise.
* jv-exp.y: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* jv-valprint.c: Likewise.
* language.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* lm32-tdep.c: Likewise.
* m2-exp.y: Likewise.
* m2-typeprint.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-linux-tdep.c: Likewise.
* m32r-rom.c: Likewise.
* m32r-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m68klinux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macrocmd.c: Likewise.
* main.c: Likewise.
* mdebugread.c: Likewise.
* mem-break.c: Likewise.
* memattr.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-disas.c: Likewise.
* mi/mi-cmd-env.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-cmd-var.c: Likewise.
* mi/mi-cmds.c: Likewise.
* mi/mi-console.c: Likewise.
* mi/mi-getopt.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.c: Likewise.
* microblaze-rom.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* minidebug.c: Likewise.
* minsyms.c: Likewise.
* mips-irix-tdep.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mipsread.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* monitor.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-waitpid.c: Likewise.
* nbsd-tdep.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* nto-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* osdata.c: Likewise.
* p-exp.y: Likewise.
* p-lang.c: Likewise.
* p-typeprint.c: Likewise.
* parse.c: Likewise.
* posix-hdep.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* ravenscar-thread.c: Likewise.
* regcache.c: Likewise.
* registry.c: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote-mips.c: Likewise.
* remote-notif.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* reverse.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-go32.c: Likewise.
* ser-mingw.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* serial.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* shnbsd-tdep.c: Likewise.
* skip.c: Likewise.
* sol-thread.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-osf.c: Likewise.
* solib-som.c: Likewise.
* solib-spu.c: Likewise.
* solib-target.c: Likewise.
* solib.c: Likewise.
* somread.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* spu-linux-nat.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* std-regs.c: Likewise.
* symfile.c: Likewise.
* symmisc.c: Likewise.
* symtab.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-command.c: Likewise.
* tui/tui-data.c: Likewise.
* tui/tui-disasm.c: Likewise.
* tui/tui-file.c: Likewise.
* tui/tui-layout.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-regs.c: Likewise.
* tui/tui-source.c: Likewise.
* tui/tui-stack.c: Likewise.
* tui/tui-win.c: Likewise.
* tui/tui-windata.c: Likewise.
* tui/tui-winsource.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-tdep.c: Likewise.
* vaxnbsd-tdep.c: Likewise.
* vaxobsd-tdep.c: Likewise.
* windows-nat.c: Likewise.
* xcoffread.c: Likewise.
* xml-support.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include string.h.
* event-loop.c: Likewise.
* linux-low.c: Likewise.
* regcache.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
|
|
* NEWS: Mention Guile scripting.
* Makefile.in (SUBDIR_GUILE_OBS): New variable.
(SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
(SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
(INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
(CLIBS): Add GUILE_LIBS.
(install-guile): New rule.
(guile.o): New rule.
(scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
(scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
(scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
(scm-math.o, scm-objfile.o, scm-ports.o): New rules.
(scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
(scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
(scm-type.o, scm-utils.o, scm-value.o): New rules.
* configure.ac: New option --with-guile.
* configure: Regenerate.
* config.in: Regenerate.
* auto-load.c: Remove #include "python/python.h". Add #include
"gdb/section-scripts.h".
(source_section_scripts): Handle Guile scripts.
(_initialize_auto_load): Add name of Guile objfile script to
scripts-directory help text.
* breakpoint.c (condition_command): Tweak comment to include Scheme.
* breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
(struct breakpoint): New member scm_bp_object.
* defs.h (enum command_control_type): New value guile_control.
* cli/cli-cmds.c: Remove #include "python/python.h". Add #include
"extension.h".
(show_user): Update comment.
(_initialize_cli_cmds): Update help text for "show user". Update help
text for max-user-call-depth.
* cli/cli-script.c: Remove #include "python/python.h". Add #include
"extension.h".
(multi_line_command_p): Add guile_control.
(print_command_lines): Handle guile_control.
(execute_control_command, recurse_read_control_structure): Ditto.
(process_next_line): Recognize "guile" commands.
* disasm.c (gdb_disassemble_info): Make non-static.
* disasm.h: #include "dis-asm.h".
(struct gdbarch): Add forward decl.
(gdb_disassemble_info): Declare.
* extension.c: #include "guile/guile.h".
(extension_languages): Add guile.
(get_ext_lang_defn): Handle EXT_LANG_GDB.
* extension.h (enum extension_language): New value EXT_LANG_GUILE.
* gdbtypes.c (get_unsigned_type_max): New function.
(get_signed_type_minmax): New function.
* gdbtypes.h (get_unsigned_type_max): Declare.
(get_signed_type_minmax): Declare.
* guile/README: New file.
* guile/guile-internal.h: New file.
* guile/guile.c: New file.
* guile/guile.h: New file.
* guile/scm-arch.c: New file.
* guile/scm-auto-load.c: New file.
* guile/scm-block.c: New file.
* guile/scm-breakpoint.c: New file.
* guile/scm-disasm.c: New file.
* guile/scm-exception.c: New file.
* guile/scm-frame.c: New file.
* guile/scm-gsmob.c: New file.
* guile/scm-iterator.c: New file.
* guile/scm-lazy-string.c: New file.
* guile/scm-math.c: New file.
* guile/scm-objfile.c: New file.
* guile/scm-ports.c: New file.
* guile/scm-pretty-print.c: New file.
* guile/scm-safe-call.c: New file.
* guile/scm-string.c: New file.
* guile/scm-symbol.c: New file.
* guile/scm-symtab.c: New file.
* guile/scm-type.c: New file.
* guile/scm-utils.c: New file.
* guile/scm-value.c: New file.
* guile/lib/gdb.scm: New file.
* guile/lib/gdb/boot.scm: New file.
* guile/lib/gdb/experimental.scm: New file.
* guile/lib/gdb/init.scm: New file.
* guile/lib/gdb/iterator.scm: New file.
* guile/lib/gdb/printing.scm: New file.
* guile/lib/gdb/types.scm: New file.
* data-directory/Makefile.in (GUILE_SRCDIR): New variable.
(VPATH): Add $(GUILE_SRCDIR).
(GUILE_DIR): New variable.
(GUILE_INSTALL_DIR, GUILE_FILES): New variables.
(all): Add stamp-guile dependency.
(stamp-guile): New rule.
(clean-guile, install-guile, uninstall-guile): New rules.
(install-only): Add install-guile dependency.
(uninstall): Add uninstall-guile dependency.
(clean): Add clean-guile dependency.
doc/
* Makefile.in (GDB_DOC_FILES): Add guile.texi.
* gdb.texinfo (Auto-loading): Add set/show auto-load guile-scripts.
(Extending GDB): New menu entries Guile, Multiple Extension Languages.
(Guile docs): Include guile.texi.
(objfile-gdbdotext file): Add objfile-gdb.scm.
(dotdebug_gdb_scripts section): Mention Guile scripts.
(Multiple Extension Languages): New node.
* guile.texi: New file.
testsuite/
* configure.ac (AC_OUTPUT): Add gdb.guile.
* configure: Regenerate.
* lib/gdb-guile.exp: New file.
* lib/gdb.exp (get_target_charset): New function.
* gdb.base/help.exp: Update expected output from "apropos apropos".
* gdb.guile/Makefile.in: New file.
* gdb.guile/guile.exp: New file.
* gdb.guile/scm-arch.c: New file.
* gdb.guile/scm-arch.exp: New file.
* gdb.guile/scm-block.c: New file.
* gdb.guile/scm-block.exp: New file.
* gdb.guile/scm-breakpoint.c: New file.
* gdb.guile/scm-breakpoint.exp: New file.
* gdb.guile/scm-disasm.c: New file.
* gdb.guile/scm-disasm.exp: New file.
* gdb.guile/scm-equal.c: New file.
* gdb.guile/scm-equal.exp: New file.
* gdb.guile/scm-error.exp: New file.
* gdb.guile/scm-error.scm: New file.
* gdb.guile/scm-frame-args.c: New file.
* gdb.guile/scm-frame-args.exp: New file.
* gdb.guile/scm-frame-args.scm: New file.
* gdb.guile/scm-frame-inline.c: New file.
* gdb.guile/scm-frame-inline.exp: New file.
* gdb.guile/scm-frame.c: New file.
* gdb.guile/scm-frame.exp: New file.
* gdb.guile/scm-generics.exp: New file.
* gdb.guile/scm-gsmob.exp: New file.
* gdb.guile/scm-iterator.c: New file.
* gdb.guile/scm-iterator.exp: New file.
* gdb.guile/scm-math.c: New file.
* gdb.guile/scm-math.exp: New file.
* gdb.guile/scm-objfile-script-gdb.in: New file.
* gdb.guile/scm-objfile-script.c: New file.
* gdb.guile/scm-objfile-script.exp: New file.
* gdb.guile/scm-objfile.c: New file.
* gdb.guile/scm-objfile.exp: New file.
* gdb.guile/scm-ports.exp: New file.
* gdb.guile/scm-pretty-print.c: New file.
* gdb.guile/scm-pretty-print.exp: New file.
* gdb.guile/scm-pretty-print.scm: New file.
* gdb.guile/scm-section-script.c: New file.
* gdb.guile/scm-section-script.exp: New file.
* gdb.guile/scm-section-script.scm: New file.
* gdb.guile/scm-symbol.c: New file.
* gdb.guile/scm-symbol.exp: New file.
* gdb.guile/scm-symtab-2.c: New file.
* gdb.guile/scm-symtab.c: New file.
* gdb.guile/scm-symtab.exp: New file.
* gdb.guile/scm-type.c: New file.
* gdb.guile/scm-type.exp: New file.
* gdb.guile/scm-value-cc.cc: New file.
* gdb.guile/scm-value-cc.exp: New file.
* gdb.guile/scm-value.c: New file.
* gdb.guile/scm-value.exp: New file.
* gdb.guile/source2.scm: New file.
* gdb.guile/types-module.cc: New file.
* gdb.guile/types-module.exp: New file.
|
|
|
|
This patch teaches "disassembly" use code cache mechanism to read
target code.
gdb:
2013-11-24 Yao Qi <yao@codesourcery.com>
* disasm.c (dis_asm_read_memory): Call target_read_code
instead of target_read_memory.
|
|
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
instruction-history" command of record-btrace.
The pc prefix would appear multiple times in the branch trace disassembly,
which is more confusing than helpful.
gdb/
* record-btrace.c (btrace_insn_history): Omit the pc prefix in
the instruction history disassembly.
* disasm.c (dump_insns): Omit the pc prefix, if requested.
* disasm.h (DISASSEMBLY_OMIT_PC): New.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* disasm.c (do_mixed_source_and_assembly): Pass filename flag on
to print_source_lines ().
* symtab.h (PRINT_SOURCE_LINES_FILENAME): New print source lines
flag.
* source.c (print_source_lines_base): Prefix source line with
filename if PRINT_SOURCE_LINES_FILENAME flag is set.
|
|
Eliminate struct ui_stream.
* ui-out.h (struct ui_stream): Delete.
(ui_out_field_stream): Adjust prototype.
(ui_out_stream_new, ui_out_stream_delete)
(make_cleanup_ui_out_stream_delete): Delete declarations.
* ui-out.c (ui_out_field_stream): Change prototype to take a
ui_file instead of a ui_stream. Adjust.
(ui_out_stream_new, ui_out_stream_delete, do_stream_delete)
(make_cleanup_ui_out_stream_delete): Delete.
* breakpoint.c (print_breakpoint_location)
(print_one_detail_ranged_breakpoint, print_it_watchpoint): Use
ui_file/mem_fileopen instead of ui_stream/ui_out_stream_new.
* disasm.c (dump_insns): Ditto.
(do_mixed_source_and_assembly, do_assembly_only): Adjust
prototype.
(gdb_disassembly): Use ui_file/mem_fileopen instead of
ui_stream/ui_out_stream_new.
* infcmd.c (print_return_value): Ditto.
* osdata.c (info_osdata_command): Don't allocate a local
ui_stream.
* stack.c (print_frame_arg, print_frame_args, print_frame): Use
ui_file/mem_fileopen instead of ui_stream/ui_out_stream_new.
* tracepoint.c (print_one_static_tracepoint_marker): Don't
allocate a local ui_stream.
* mi/mi-cmd-stack.c (list_arg_or_local): Use ui_file/mem_fileopen
instead of ui_stream/ui_out_stream_new.
(list_args_or_locals): Don't allocate a local ui_stream.
* mi/mi-main.c (get_register, mi_cmd_data_evaluate_expression)
(mi_cmd_data_read_memory): Use ui_file/mem_fileopen instead of
ui_stream/ui_out_stream_new.
* cli/cli-setshow.c (do_setshow_command): Ditto.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
Improve the ordering of line table entries when dealing with the end
of sequence markers. This will allow us to disassemble over the border
between two compile units while also displaying source code information.
|
|
gdb/
* disasm.c (dump_insns): Support dumping opcodes for MI.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
dumping of instruction opcodes.
gdb/doc/
* gdb.texinfo (GDB/MI Data Manipulation): Update to reflect
changes in mi/mi-cmd-disas.c
gdb/testsuite/
* gdb.mi/mi-disassemble.exp, gdb.mi/mi2-disassemble.exp: Update
expected output to reflect changes in gdb/mi/mi-cmd-disas.c and
add new tests for opcode dumping.
|
|
* ada-lang.c: Comment cleanup, mostly periods and spaces.
* ada-lang.h: Ditto.
* ada-tasks.c: Ditto.
* ada-valprint.c: Ditto.
* aix-threads.c: Ditto.
* alpha-linux-nat.c: Ditto.
* alpha-linux-tdep.c: Ditto.
* alpha-mdebug-tdep.c: Ditto.
* alpha-nat.c: Ditto.
* alpha-osf1-tdep.c: Ditto.
* alpha-tdep.c: Ditto.
* alphabsd-nat.c: Ditto.
* alphabsd-tdep.c: Ditto.
* amd64-darwin-tdep.c: Ditto.
* amd64-linux-nat.c: Ditto.
* amd64-linux-tdep.c: Ditto.
* amd64-sol2-tdep.c: Ditto.
* amd64-tdep.c: Ditto.
* amd64-fbsd-tdep.c: Ditto.
* amd64-nbsd-tdep.c: Ditto.
* amd64-obsd-tdep.c: Ditto.
* amd64-linux-nat.c: Ditto.
* amd64-linux-tdep.c: Ditto.
* arm-tdep.c: Ditto.
* arm-tdep.h: Ditto.
* armnbsd-nat.c: Ditto.
* avr-tdep.c: Ditto.
* bfin-tdep.c: Ditto.
* bsd-kvm.c: Ditto.
* c-typeprintc: Ditto.
* c-valprint.c: Ditto.
* coff-pe-read.h: Ditto.
* coffreead.c: Ditto.
* cris-tdep.c: Ditto.
* d-lang.c: Ditto.
* darwin-nat-info.c: Ditto.
* darwin-nat.c: Ditto.
* dbug-rom.c: Ditto.
* dbxread.c: Ditto.
* dcache.c: Ditto.
* dcache.h: Ditto.
* dec-thread.c: Ditto.
* defs.h: Ditto.
* demangle.c: Ditto.
* dicos-tdep.c: Ditto.
* dictionary.c: Ditto.
* dictionary.h: Ditto.
* dink32-rom.c: Ditto.
* disasm.c: Ditto.
* doublest.c: Ditto.
* dsrec.c: Ditto.
* dummy-frame.c: Ditto.
* dwarf2-frame.c: Ditto.
* dwarf2expr.c: Ditto.
* dwarf2loc.c: Ditto.
* dwarf2read.c: Ditto.
* elfread.c: Ditto.
* environ.c: Ditto.
* eval.c: Ditto.
* event-top.h: Ditto.
* exceptions.c: Ditto.
* exceptions.h: Ditto.
* exec.c: Ditto.
* expprint.c: Ditto.
* expression.h: Ditto.
* f-exp.y: Ditto.
* f-lang.c: Ditto.
* f-lang.h: Ditto.
* f-typeprint.c: Ditto.
* f-valprint.c: Ditto.
* fbsd-nat.c: Ditto.
* findvar.c: Ditto.
* fork-child.c: Ditto.
* frame.c: Ditto.
* frame.h: Ditto.
* frv-linux-tdep.c: Ditto.
* frv-tdep.c: Ditto.
* gcore.c: Ditto.
* gdb-stabs.h: Ditto.
* gdb_assert.h: Ditto.
* gdb_string.h: Ditto.
* gdb_thread_db.h: Ditto.
* gdb_wait.h: Ditto.
* gdbarch.sh: Ditto.
* gdbcore.h: Ditto.
* gdbthread.h: Ditto.
* gdbtypes.c: Ditto.
* gdbtypes.h: Ditto.
* gnu-nat.c: Ditto.
* gnu-nat.h: Ditto.
* gnu-v2-abi.c: Ditto.
* gnu-v3-abi.c: Ditto.
* go32-nat.c: Ditto.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
|
|
* addrmap.c: Shorten lines of >= 80 columns.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* ax-gdb.c: Ditto.
* ax-general.c: Ditto.
* bcache.c: Ditto.
* blockframe.c: Ditto.
* breakpoint.c: Ditto.
* buildsym.c: Ditto.
* c-lang.c: Ditto.
* c-typeprint.c: Ditto.
* charset.c: Ditto.
* coffread.c: Ditto.
* command.h: Ditto.
* corelow.c: Ditto.
* cp-abi.c: Ditto.
* cp-namespace.c: Ditto.
* cp-support.c: Ditto.
* dbug-rom.c: Ditto.
* dbxread.c: Ditto.
* defs.h: Ditto.
* dfp.c: Ditto.
* dfp.h: Ditto.
* dictionary.c: Ditto.
* disasm.c: Ditto.
* doublest.c: Ditto.
* dwarf2-frame.c: Ditto.
* dwarf2expr.c: Ditto.
* dwarf2loc.c: Ditto.
* dwarf2read.c: Ditto.
* elfread.c: Ditto.
* eval.c: Ditto.
* event-loop.c: Ditto.
* event-loop.h: Ditto.
* exceptions.h: Ditto.
* exec.c: Ditto.
* expprint.c: Ditto.
* expression.h: Ditto.
* f-lang.c: Ditto.
* f-valprint.c: Ditto.
* findcmd.c: Ditto.
* frame-base.c: Ditto.
* frame-unwind.c: Ditto.
* frame-unwind.h: Ditto.
* frame.c: Ditto.
* frame.h: Ditto.
* gcore.c: Ditto.
* gdb-stabs.h: Ditto.
* gdb_assert.h: Ditto.
* gdb_dirent.h: Ditto.
* gdb_obstack.h: Ditto.
* gdbcore.h: Ditto.
* gdbtypes.c: Ditto.
* gdbtypes.h: Ditto.
* inf-ttrace.c: Ditto.
* infcall.c: Ditto.
* infcmd.c: Ditto.
* inflow.c: Ditto.
* infrun.c: Ditto.
* inline-frame.h: Ditto.
* language.c: Ditto.
* language.h: Ditto.
* libunwind-frame.c: Ditto.
* libunwind-frame.h: Ditto.
* linespec.c: Ditto.
* linux-nat.c: Ditto.
* linux-nat.h: Ditto.
* linux-thread-db.c: Ditto.
* machoread.c: Ditto.
* macroexp.c: Ditto.
* macrotab.c: Ditto.
* main.c: Ditto.
* maint.c: Ditto.
* mdebugread.c: Ditto.
* memattr.c: Ditto.
* minsyms.c: Ditto.
* monitor.c: Ditto.
* monitor.h: Ditto.
* objfiles.c: Ditto.
* objfiles.h: Ditto.
* osabi.c: Ditto.
* p-typeprint.c: Ditto.
* p-valprint.c: Ditto.
* parse.c: Ditto.
* printcmd.c: Ditto.
* proc-events.c: Ditto.
* procfs.c: Ditto.
* progspace.c: Ditto.
* progspace.h: Ditto.
* psympriv.h: Ditto.
* psymtab.c: Ditto.
* record.c: Ditto.
* regcache.c: Ditto.
* regcache.h: Ditto.
* remote-fileio.c: Ditto.
* remote.c: Ditto.
* ser-mingw.c: Ditto.
* ser-tcp.c: Ditto.
* ser-unix.c: Ditto.
* serial.c: Ditto.
* serial.h: Ditto.
* solib-frv.c: Ditto.
* solib-irix.c: Ditto.
* solib-osf.c: Ditto.
* solib-pa64.c: Ditto.
* solib-som.c: Ditto.
* solib-sunos.c: Ditto.
* solib-svr4.c: Ditto.
* solib-target.c: Ditto.
* solib.c: Ditto.
* somread.c: Ditto.
* source.c: Ditto.
* stabsread.c: Ditto.
* stabsread.c: Ditto.
* stack.c: Ditto.
* stack.h: Ditto.
* symfile-mem.c: Ditto.
* symfile.c: Ditto.
* symfile.h: Ditto.
* symmisc.c: Ditto.
* symtab.c: Ditto.
* symtab.h: Ditto.
* target-descriptions.c: Ditto.
* target-memory.c: Ditto.
* target.c: Ditto.
* target.h: Ditto.
* terminal.h: Ditto.
* thread.c: Ditto.
* top.c: Ditto.
* tracepoint.c: Ditto.
* tracepoint.h: Ditto.
* ui-file.c: Ditto.
* ui-file.h: Ditto.
* ui-out.h: Ditto.
* user-regs.c: Ditto.
* user-regs.h: Ditto.
* utils.c: Ditto.
* valarith.c: Ditto.
* valops.c: Ditto.
* valprint.c: Ditto.
* valprint.h: Ditto.
* value.c: Ditto.
* varobj.c: Ditto.
* varobj.h: Ditto.
* vec.h: Ditto.
* xcoffread.c: Ditto.
* xcoffsolib.c: Ditto.
* xcoffsolib.h: Ditto.
* xml-syscall.c: Ditto.
* xml-tdesc.c: Ditto.
|
|
|
|
* dbxread.c: White space.
* dcache.c: White space.
* disasm.c: White space.
* doublest.c: White space.
* dsrec.c: White space.
* dummy-frame.c: White space.
* dwarf2expr.c: White space.
* dwarf2-frame.c: White space.
* dwarf2loc.c: White space.
* dwarf2read.c: White space.
|
|
* auxv.c (target_auxv_search): Delete unused variable.
* blockframe.c (get_frame_block): Delete unused variable.
* regcache.c (regcache_cpy): Delete unused variable.
(regcache_cpy_no_passthrough): Delete unused variable.
* charset.c (wchar_iterate): Delete unused variable.
(find_charset_names): Delete unused variable.
(_initialize_charset): Delete unused variable.
* disasm.c (do_mixed_source_and_assembly):
Delete unused variable.
* source.c (set_default_source_symtab_and_line):
Delete unused variable.
(set_substitute_path_command): Delete unused variable.
* value.c (preserve_values): Delete unused variable.
(value_from_double): Delete unused variable.
|
|
(amd64_insn_length_fprintf, amd64_insn_length_init_dis)
(amd64_insn_length): Moved to disasm.c and renamed.
(fixup_riprel): Adjust.
* disasm.c (do_ui_file_delete): New.
(gdb_insn_length): New.
(gdb_buffered_insn_length_fprintf)
(gdb_buffered_insn_length_init_dis)
(gdb_buffered_insn_length): New, moved from amd64-tdep.c, and
renamed.
* disasm.h (gdb_insn_length): Declare.
(gdb_buffered_insn_length): Declare.
|
|
* ada-lang.c (lim_warning): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
* amd64-tdep.c (amd64_insn_length_fprintf): Likewise.
* cli-out.c (cli_field_fmt): New ATTRIBUTE_PRINTF.
(cli_message, out_field_fmt): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
* complaints.c (find_complaint): New ATTRIBUTE_PRINTF.
(vcomplaint): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
* complaints.h (complaint, internal_complaint): Likewise.
* defs.h: Change ATTR_FORMAT to ATTRIBUTE_PRINTF in the top comment.
(ATTR_FORMAT): Remove.
(query, nquery, yquery, vprintf_filtered, vfprintf_filtered)
(fprintf_filtered, fprintfi_filtered, printf_filtered, printfi_filtered)
(vprintf_unfiltered, vfprintf_unfiltered, fprintf_unfiltered)
(printf_unfiltered, xasprintf, xvasprintf, xstrprintf, xstrvprintf)
(xsnprintf, verror, error, vfatal, fatal, internal_verror)
(internal_error, internal_vwarning, internal_warning, warning)
(vwarning): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
* disasm.c (fprintf_disasm): Likewise.
* exceptions.c (throw_it): Likewise.
* exceptions.h (exception_fprintf, throw_verror, throw_vfatal)
(throw_error): Likewise.
* language.h (type_error, range_error): Likewise.
* linespec.c (cplusplus_error): Likewise.
* mi/mi-interp.c (mi_interp_query_hook): Likewise.
* mi/mi-out.c (mi_field_fmt, mi_message): Likewise.
* monitor.c (monitor_debug): Likewise.
* parser-defs.h (parser_fprintf): Likewise.
* serial.h (serial_printf): Likewise.
* tui/tui-hooks.c (tui_query_hook): Likewise.
* ui-out.c (default_field_fmt, default_message, uo_field_fmt)
(uo_message): Likewise.
* ui-out.h (ui_out_field_fmt, ui_out_message): Likewise.
* utils.c (vfprintf_maybe_filtered, internal_vproblem, defaulted_query):
Likewise.
* xml-support.h (gdb_xml_debug, gdb_xml_error): Likewise.
|
|
Automatic update by copyright.sh.
|
|
prototypes.
* printcmd.c (print_address_symbolic): Take a gdbarch argument.
Pass it to build_address_symbolic. All callers updated.
(build_address_symbolic): Take a gdbarch argument. Use
gdbarch_addr_bits_remove for functions. All callers updated.
|
|
* disasm.h (DISASSEMBLY_OMIT_FNAME) New define.
(gdb_disassembly): Correct parameter name.
* disasm.c (dump_insns): Adjust.
(gdb_disassembly): Fix indentation.
* cli/cli-cmds.c (disassemble_command): Adjust.
doc/ChangeLog:
2009-10-22 Paul Pluzhnikov <ppluzhnikov@google.com>
* gdb.texinfo (Machine Code): Mention function name in disasssembly
and adjust example.
testsuite/ChangeLog:
2009-10-22 Paul Pluzhnikov <ppluzhnikov@google.com>
* gdb.asm/asm-source.exp: Adjust.
|
