| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2020-01-01 | Update copyright year range in all GDB files. | Joel Brobecker | 1 | -1/+1 | |
| gdb/ChangeLog: Update copyright year range in all GDB files. | |||||
| 2019-07-10 | Don't include gdbarch.h from defs.h | Tom Tromey | 1 | -0/+1 | |
| I touched symtab.h and was surprised to see how many files were rebuilt. I looked into it a bit, and found that defs.h includes gdbarch.h, which in turn includes many things. gdbarch.h is only needed by a minority ofthe files in gdb, so this patch removes the include from defs.h and updates the fallout. I did "wc -l" on the files in build/gdb/.deps; this patch reduces the line count from 139935 to 137030; so there are definitely future build-time savings here. Note that while I configured with --enable-targets=all, it's possible that some *-nat.c file needs an update. I could not test all of these. The buildbot caught a few problems along these lines. gdb/ChangeLog 2019-07-10 Tom Tromey <tom@tromey.com> * defs.h: Don't include gdbarch.h. * aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h, alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h, ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c, cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h, cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c, compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c, cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c, dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c, dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c, dwarf2expr.c, expression.h, f-lang.c, frame-base.c, frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h, go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c, i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c, linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c, mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c, objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c, parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c, record-btrace.c, record.h, regcache-dump.c, regcache.h, riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y, sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c, sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c, sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h, target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c, tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c, utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c, xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update. * s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise. | |||||
| 2019-07-09 | Rename common to gdbsupport | Tom Tromey | 1 | -1/+1 | |
| This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport. | |||||
| 2019-04-08 | Rename gdb exception types | Tom Tromey | 1 | -1/+1 | |
| This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update. | |||||
| 2019-04-08 | Rewrite TRY/CATCH | Tom Tromey | 1 | -3/+2 | |
| This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling. | |||||
| 2019-04-06 | Revert the header-sorting patch | Tom Tromey | 1 | -2/+0 | |
| Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert. | |||||
| 2019-04-05 | Sort includes for files gdb/[a-f]*.[chyl]. | Tom Tromey | 1 | -0/+2 | |
| This patch sorts the include files for the files [a-f]*.[chyl]. The patch was written by a script. Tested by the buildbot. I will follow up with patches to sort the remaining files, by sorting a subset, testing them, and then checking them in. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> * ft32-tdep.c: Sort headers. * frv-tdep.c: Sort headers. * frv-linux-tdep.c: Sort headers. * frame.c: Sort headers. * frame-unwind.c: Sort headers. * frame-base.c: Sort headers. * fork-child.c: Sort headers. * findvar.c: Sort headers. * findcmd.c: Sort headers. * filesystem.c: Sort headers. * filename-seen-cache.h: Sort headers. * filename-seen-cache.c: Sort headers. * fbsd-tdep.c: Sort headers. * fbsd-nat.h: Sort headers. * fbsd-nat.c: Sort headers. * f-valprint.c: Sort headers. * f-typeprint.c: Sort headers. * f-lang.c: Sort headers. * extension.h: Sort headers. * extension.c: Sort headers. * extension-priv.h: Sort headers. * expprint.c: Sort headers. * exec.h: Sort headers. * exec.c: Sort headers. * exceptions.c: Sort headers. * event-top.c: Sort headers. * event-loop.c: Sort headers. * eval.c: Sort headers. * elfread.c: Sort headers. * dwarf2read.h: Sort headers. * dwarf2read.c: Sort headers. * dwarf2loc.c: Sort headers. * dwarf2expr.h: Sort headers. * dwarf2expr.c: Sort headers. * dwarf2-frame.c: Sort headers. * dwarf2-frame-tailcall.c: Sort headers. * dwarf-index-write.h: Sort headers. * dwarf-index-write.c: Sort headers. * dwarf-index-common.c: Sort headers. * dwarf-index-cache.h: Sort headers. * dwarf-index-cache.c: Sort headers. * dummy-frame.c: Sort headers. * dtrace-probe.c: Sort headers. * disasm.h: Sort headers. * disasm.c: Sort headers. * disasm-selftests.c: Sort headers. * dictionary.c: Sort headers. * dicos-tdep.c: Sort headers. * demangle.c: Sort headers. * dcache.h: Sort headers. * dcache.c: Sort headers. * darwin-nat.h: Sort headers. * darwin-nat.c: Sort headers. * darwin-nat-info.c: Sort headers. * d-valprint.c: Sort headers. * d-namespace.c: Sort headers. * d-lang.c: Sort headers. * ctf.c: Sort headers. * csky-tdep.c: Sort headers. * csky-linux-tdep.c: Sort headers. * cris-tdep.c: Sort headers. * cris-linux-tdep.c: Sort headers. * cp-valprint.c: Sort headers. * cp-support.c: Sort headers. * cp-namespace.c: Sort headers. * cp-abi.c: Sort headers. * corelow.c: Sort headers. * corefile.c: Sort headers. * continuations.c: Sort headers. * completer.h: Sort headers. * completer.c: Sort headers. * complaints.c: Sort headers. * coffread.c: Sort headers. * coff-pe-read.c: Sort headers. * cli-out.h: Sort headers. * cli-out.c: Sort headers. * charset.c: Sort headers. * c-varobj.c: Sort headers. * c-valprint.c: Sort headers. * c-typeprint.c: Sort headers. * c-lang.c: Sort headers. * buildsym.c: Sort headers. * buildsym-legacy.c: Sort headers. * build-id.h: Sort headers. * build-id.c: Sort headers. * btrace.c: Sort headers. * bsd-uthread.c: Sort headers. * breakpoint.h: Sort headers. * breakpoint.c: Sort headers. * break-catch-throw.c: Sort headers. * break-catch-syscall.c: Sort headers. * break-catch-sig.c: Sort headers. * blockframe.c: Sort headers. * block.c: Sort headers. * bfin-tdep.c: Sort headers. * bfin-linux-tdep.c: Sort headers. * bfd-target.c: Sort headers. * bcache.c: Sort headers. * ax-general.c: Sort headers. * ax-gdb.h: Sort headers. * ax-gdb.c: Sort headers. * avr-tdep.c: Sort headers. * auxv.c: Sort headers. * auto-load.c: Sort headers. * arm-wince-tdep.c: Sort headers. * arm-tdep.c: Sort headers. * arm-symbian-tdep.c: Sort headers. * arm-pikeos-tdep.c: Sort headers. * arm-obsd-tdep.c: Sort headers. * arm-nbsd-tdep.c: Sort headers. * arm-nbsd-nat.c: Sort headers. * arm-linux-tdep.c: Sort headers. * arm-linux-nat.c: Sort headers. * arm-fbsd-tdep.c: Sort headers. * arm-fbsd-nat.c: Sort headers. * arm-bsd-tdep.c: Sort headers. * arch-utils.c: Sort headers. * arc-tdep.c: Sort headers. * arc-newlib-tdep.c: Sort headers. * annotate.h: Sort headers. * annotate.c: Sort headers. * amd64-windows-tdep.c: Sort headers. * amd64-windows-nat.c: Sort headers. * amd64-tdep.c: Sort headers. * amd64-sol2-tdep.c: Sort headers. * amd64-obsd-tdep.c: Sort headers. * amd64-obsd-nat.c: Sort headers. * amd64-nbsd-tdep.c: Sort headers. * amd64-nbsd-nat.c: Sort headers. * amd64-nat.c: Sort headers. * amd64-linux-tdep.c: Sort headers. * amd64-linux-nat.c: Sort headers. * amd64-fbsd-tdep.c: Sort headers. * amd64-fbsd-nat.c: Sort headers. * amd64-dicos-tdep.c: Sort headers. * amd64-darwin-tdep.c: Sort headers. * amd64-bsd-nat.c: Sort headers. * alpha-tdep.c: Sort headers. * alpha-obsd-tdep.c: Sort headers. * alpha-nbsd-tdep.c: Sort headers. * alpha-mdebug-tdep.c: Sort headers. * alpha-linux-tdep.c: Sort headers. * alpha-linux-nat.c: Sort headers. * alpha-bsd-tdep.c: Sort headers. * alpha-bsd-nat.c: Sort headers. * aix-thread.c: Sort headers. * agent.c: Sort headers. * addrmap.c: Sort headers. * ada-varobj.c: Sort headers. * ada-valprint.c: Sort headers. * ada-typeprint.c: Sort headers. * ada-tasks.c: Sort headers. * ada-lang.c: Sort headers. * aarch64-tdep.c: Sort headers. * aarch64-ravenscar-thread.c: Sort headers. * aarch64-newlib-tdep.c: Sort headers. * aarch64-linux-tdep.c: Sort headers. * aarch64-linux-nat.c: Sort headers. * aarch64-fbsd-tdep.c: Sort headers. * aarch64-fbsd-nat.c: Sort headers. * aarch32-linux-nat.c: Sort headers. | |||||
| 2019-01-25 | Normalize includes to use common/ | Tom Tromey | 1 | -1/+1 | |
| This changes all includes to use the form "common/filename.h" rather than just "filename.h". This was written by a script. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * xtensa-linux-nat.c: Fix common/ includes. * xml-support.h: Fix common/ includes. * xml-support.c: Fix common/ includes. * x86-linux-nat.c: Fix common/ includes. * windows-nat.c: Fix common/ includes. * varobj.h: Fix common/ includes. * varobj.c: Fix common/ includes. * value.c: Fix common/ includes. * valops.c: Fix common/ includes. * utils.c: Fix common/ includes. * unittests/xml-utils-selftests.c: Fix common/ includes. * unittests/utils-selftests.c: Fix common/ includes. * unittests/unpack-selftests.c: Fix common/ includes. * unittests/tracepoint-selftests.c: Fix common/ includes. * unittests/style-selftests.c: Fix common/ includes. * unittests/string_view-selftests.c: Fix common/ includes. * unittests/scoped_restore-selftests.c: Fix common/ includes. * unittests/scoped_mmap-selftests.c: Fix common/ includes. * unittests/scoped_fd-selftests.c: Fix common/ includes. * unittests/rsp-low-selftests.c: Fix common/ includes. * unittests/parse-connection-spec-selftests.c: Fix common/ includes. * unittests/optional-selftests.c: Fix common/ includes. * unittests/offset-type-selftests.c: Fix common/ includes. * unittests/observable-selftests.c: Fix common/ includes. * unittests/mkdir-recursive-selftests.c: Fix common/ includes. * unittests/memrange-selftests.c: Fix common/ includes. * unittests/memory-map-selftests.c: Fix common/ includes. * unittests/lookup_name_info-selftests.c: Fix common/ includes. * unittests/function-view-selftests.c: Fix common/ includes. * unittests/environ-selftests.c: Fix common/ includes. * unittests/copy_bitwise-selftests.c: Fix common/ includes. * unittests/common-utils-selftests.c: Fix common/ includes. * unittests/cli-utils-selftests.c: Fix common/ includes. * unittests/array-view-selftests.c: Fix common/ includes. * ui-file.c: Fix common/ includes. * tui/tui-io.c: Fix common/ includes. * tracepoint.h: Fix common/ includes. * tracepoint.c: Fix common/ includes. * tracefile-tfile.c: Fix common/ includes. * top.h: Fix common/ includes. * top.c: Fix common/ includes. * thread.c: Fix common/ includes. * target/waitstatus.h: Fix common/ includes. * target/waitstatus.c: Fix common/ includes. * target.h: Fix common/ includes. * target.c: Fix common/ includes. * target-memory.c: Fix common/ includes. * target-descriptions.c: Fix common/ includes. * symtab.h: Fix common/ includes. * symfile.c: Fix common/ includes. * stap-probe.c: Fix common/ includes. * spu-linux-nat.c: Fix common/ includes. * sparc-nat.c: Fix common/ includes. * source.c: Fix common/ includes. * solib.c: Fix common/ includes. * solib-target.c: Fix common/ includes. * ser-unix.c: Fix common/ includes. * ser-tcp.c: Fix common/ includes. * ser-pipe.c: Fix common/ includes. * ser-base.c: Fix common/ includes. * selftest-arch.c: Fix common/ includes. * s12z-tdep.c: Fix common/ includes. * rust-exp.y: Fix common/ includes. * rs6000-aix-tdep.c: Fix common/ includes. * riscv-tdep.c: Fix common/ includes. * remote.c: Fix common/ includes. * remote-notif.h: Fix common/ includes. * remote-fileio.h: Fix common/ includes. * remote-fileio.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * record-btrace.c: Fix common/ includes. * python/python.c: Fix common/ includes. * python/py-type.c: Fix common/ includes. * python/py-inferior.c: Fix common/ includes. * progspace.h: Fix common/ includes. * producer.c: Fix common/ includes. * procfs.c: Fix common/ includes. * proc-api.c: Fix common/ includes. * printcmd.c: Fix common/ includes. * ppc-linux-nat.c: Fix common/ includes. * parser-defs.h: Fix common/ includes. * osdata.c: Fix common/ includes. * obsd-nat.c: Fix common/ includes. * nat/x86-linux.c: Fix common/ includes. * nat/x86-linux-dregs.c: Fix common/ includes. * nat/x86-dregs.h: Fix common/ includes. * nat/x86-dregs.c: Fix common/ includes. * nat/ppc-linux.c: Fix common/ includes. * nat/mips-linux-watch.h: Fix common/ includes. * nat/mips-linux-watch.c: Fix common/ includes. * nat/linux-waitpid.c: Fix common/ includes. * nat/linux-ptrace.h: Fix common/ includes. * nat/linux-ptrace.c: Fix common/ includes. * nat/linux-procfs.c: Fix common/ includes. * nat/linux-personality.c: Fix common/ includes. * nat/linux-osdata.c: Fix common/ includes. * nat/linux-namespaces.c: Fix common/ includes. * nat/linux-btrace.h: Fix common/ includes. * nat/linux-btrace.c: Fix common/ includes. * nat/fork-inferior.c: Fix common/ includes. * nat/amd64-linux-siginfo.c: Fix common/ includes. * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. * nat/aarch64-linux.c: Fix common/ includes. * nat/aarch64-linux-hw-point.h: Fix common/ includes. * nat/aarch64-linux-hw-point.c: Fix common/ includes. * namespace.h: Fix common/ includes. * mips-linux-tdep.c: Fix common/ includes. * minsyms.c: Fix common/ includes. * mi/mi-parse.h: Fix common/ includes. * mi/mi-main.c: Fix common/ includes. * mi/mi-cmd-env.c: Fix common/ includes. * memrange.h: Fix common/ includes. * memattr.c: Fix common/ includes. * maint.h: Fix common/ includes. * maint.c: Fix common/ includes. * main.c: Fix common/ includes. * machoread.c: Fix common/ includes. * location.c: Fix common/ includes. * linux-thread-db.c: Fix common/ includes. * linux-nat.c: Fix common/ includes. * linux-fork.c: Fix common/ includes. * inline-frame.c: Fix common/ includes. * infrun.c: Fix common/ includes. * inflow.c: Fix common/ includes. * inferior.h: Fix common/ includes. * inferior.c: Fix common/ includes. * infcmd.c: Fix common/ includes. * inf-ptrace.c: Fix common/ includes. * inf-child.c: Fix common/ includes. * ia64-linux-nat.c: Fix common/ includes. * i387-tdep.c: Fix common/ includes. * i386-tdep.c: Fix common/ includes. * i386-linux-tdep.c: Fix common/ includes. * i386-linux-nat.c: Fix common/ includes. * i386-go32-tdep.c: Fix common/ includes. * i386-fbsd-tdep.c: Fix common/ includes. * i386-fbsd-nat.c: Fix common/ includes. * guile/scm-type.c: Fix common/ includes. * guile/guile.c: Fix common/ includes. * go32-nat.c: Fix common/ includes. * gnu-nat.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbarch-selftests.c: Fix common/ includes. * gdb_usleep.c: Fix common/ includes. * gdb_select.h: Fix common/ includes. * gdb_bfd.c: Fix common/ includes. * gcore.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * findvar.c: Fix common/ includes. * fbsd-nat.c: Fix common/ includes. * event-top.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * dwarf2read.c: Fix common/ includes. * dwarf2loc.c: Fix common/ includes. * dwarf2-frame.c: Fix common/ includes. * dwarf-index-cache.c: Fix common/ includes. * dtrace-probe.c: Fix common/ includes. * disasm-selftests.c: Fix common/ includes. * defs.h: Fix common/ includes. * csky-tdep.c: Fix common/ includes. * cp-valprint.c: Fix common/ includes. * cp-support.h: Fix common/ includes. * cp-support.c: Fix common/ includes. * corelow.c: Fix common/ includes. * completer.h: Fix common/ includes. * completer.c: Fix common/ includes. * compile/compile.c: Fix common/ includes. * compile/compile-loc2c.c: Fix common/ includes. * compile/compile-cplus-types.c: Fix common/ includes. * compile/compile-cplus-symbols.c: Fix common/ includes. * command.h: Fix common/ includes. * cli/cli-dump.c: Fix common/ includes. * cli/cli-cmds.c: Fix common/ includes. * charset.c: Fix common/ includes. * build-id.c: Fix common/ includes. * btrace.h: Fix common/ includes. * btrace.c: Fix common/ includes. * breakpoint.h: Fix common/ includes. * breakpoint.c: Fix common/ includes. * ax.h: (enum agent_op): Fix common/ includes. * ax-general.c (struct aop_map): Fix common/ includes. * ax-gdb.c: Fix common/ includes. * auxv.c: Fix common/ includes. * auto-load.c: Fix common/ includes. * arm-tdep.c: Fix common/ includes. * arch/riscv.c: Fix common/ includes. * arch/ppc-linux-common.c: Fix common/ includes. * arch/i386.c: Fix common/ includes. * arch/arm.c: Fix common/ includes. * arch/arm-linux.c: Fix common/ includes. * arch/arm-get-next-pcs.c: Fix common/ includes. * arch/amd64.c: Fix common/ includes. * arch/aarch64.c: Fix common/ includes. * arch/aarch64-insn.c: Fix common/ includes. * arch-utils.c: Fix common/ includes. * amd64-windows-tdep.c: Fix common/ includes. * amd64-tdep.c: Fix common/ includes. * amd64-sol2-tdep.c: Fix common/ includes. * amd64-obsd-tdep.c: Fix common/ includes. * amd64-nbsd-tdep.c: Fix common/ includes. * amd64-linux-tdep.c: Fix common/ includes. * amd64-linux-nat.c: Fix common/ includes. * amd64-fbsd-tdep.c: Fix common/ includes. * amd64-fbsd-nat.c: Fix common/ includes. * amd64-dicos-tdep.c: Fix common/ includes. * amd64-darwin-tdep.c: Fix common/ includes. * agent.c: Fix common/ includes. * ada-lang.h: Fix common/ includes. * ada-lang.c: Fix common/ includes. * aarch64-tdep.c: Fix common/ includes. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * win32-low.c: Fix common/ includes. * win32-i386-low.c: Fix common/ includes. * tracepoint.c: Fix common/ includes. * thread-db.c: Fix common/ includes. * target.h: Fix common/ includes. * symbol.c: Fix common/ includes. * spu-low.c: Fix common/ includes. * server.h: Fix common/ includes. * server.c: Fix common/ includes. * remote-utils.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * nto-x86-low.c: Fix common/ includes. * notif.h: Fix common/ includes. * mem-break.h: Fix common/ includes. * lynx-low.c: Fix common/ includes. * lynx-i386-low.c: Fix common/ includes. * linux-x86-tdesc-selftest.c: Fix common/ includes. * linux-x86-low.c: Fix common/ includes. * linux-low.c: Fix common/ includes. * inferiors.h: Fix common/ includes. * i387-fp.c: Fix common/ includes. * hostio.c: Fix common/ includes. * hostio-errno.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbreplay.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * ax.c: (enum gdb_agent_op): Fix common/ includes. | |||||
| 2019-01-01 | Update copyright year range in all GDB files. | Joel Brobecker | 1 | -1/+1 | |
| This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files. | |||||
| 2018-10-04 | Simple -Wshadow=local fixes | Tom Tromey | 1 | -3/+5 | |
| This fixes all the straightforward -Wshadow=local warnings in gdb. A few standard approaches are used here: * Renaming an inner (or outer, but more commonly inner) variable; * Lowering a declaration to avoid a clash; * Moving a declaration into a more inner scope to avoid a clash, including the special case of moving a declaration into a loop header. I did not consider any of the changes in this patch to be particularly noteworthy, though of course they should all still be examined. gdb/ChangeLog 2018-10-04 Tom Tromey <tom@tromey.com> * ctf.c (SET_ARRAY_FIELD): Rename "u32". * p-valprint.c (pascal_val_print): Split inner "i" variable. * xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop header. * xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in more inner scope. * xcoffread.c (read_xcoff_symtab): Rename inner "symbol". * varobj.c (varobj_update): Rename inner "newobj", "type_changed". * valprint.c (generic_emit_char): Rename inner "buf". * valops.c (find_overload_match): Rename inner "temp". (value_struct_elt_for_reference): Declare "v" in more inner scope. * v850-tdep.c (v850_push_dummy_call): Rename "len". * unittests/array-view-selftests.c (run_tests): Rename inner "vec". * tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop header. * tracepoint.c (merge_uploaded_trace_state_variables): Declare "tsv" in more inner scope. (print_one_static_tracepoint_marker): Rename inner "tuple_emitter". * tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower. (tic6x_push_dummy_call): Don't redeclare "addr". * target-float.c: Declare "dto" lower. * symtab.c (lookup_local_symbol): Rename inner "sym". (find_pc_sect_line): Rename inner "pc". * stack.c (print_frame): Don't redeclare "gdbarch". (return_command): Rename inner "gdbarch". * s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner "sp". * rust-lang.c (rust_internal_print_type): Declare "i" in loop header. * rs6000-tdep.c (ppc_process_record): Rename inner "addr". * riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner scope. * remote.c (remote_target::update_thread_list): Don't redeclare "tp". (remote_target::process_initial_stop_replies): Rename inner "thread". (remote_target::remote_parse_stop_reply): Don't redeclare "p". (remote_target::wait_as): Don't redeclare "stop_reply". (remote_target::get_thread_local_address): Rename inner "result". (remote_target::get_tib_address): Likewise. | |||||
| 2018-09-28 | Use the existing instruction to determine the RISC-V breakpoint kind. | John Baldwin | 1 | -3/+4 | |
| RISC-V supports instructions of varying lengths. Standard existing instructions in the base ISA are 4 bytes in length, but the 'C' extension adds support for compressed, 2 byte instructions. RISC-V supports two different breakpoint instructions: EBREAK is a 4 byte instruction in the base ISA, and C.EBREAK is a 2 byte instruction only available on processors implementing the 'C' extension. Using EBREAK to set breakpoints on compressed instructions causes problems as the second half of EBREAK will overwrite the first 2 bytes of the following instruction breaking other threads in the process if their PC is the following instruction. Thus, breakpoints on compressed instructions need to use C.EBREAK instead of EBREAK. Previously, the riscv architecture checked the MISA register to determine if the 'C' extension was available. If so, it used C.EBREAK for all breakpoints. However, the MISA register is not necessarily available to supervisor mode operating systems. While native targets could provide a fake MISA register value, this patch instead examines the existing instruction at a breakpoint target to determine which breakpoint instruction to use. If the existing instruction is a compressed instruction, C.EBREAK is used, otherwise EBREAK is used. gdb/ChangeLog: * disasm-selftests.c (print_one_insn_test): Add bfd_arch_riscv to case with explicit breakpoint kind. * riscv-tdep.c (show_use_compressed_breakpoints): Remove 'additional_info' and related logic. (riscv_debug_breakpoints): New variable. (riscv_breakpoint_kind_from_pc): Use the length of the existing instruction to determine the breakpoint kind. (_initialize_riscv_tdep): Add 'set/show debug riscv breakpoints' flag. Update description of 'set/show riscv use-compressed-breakpoints' flag. | |||||
| 2018-01-02 | Update copyright year range in all GDB files | Joel Brobecker | 1 | -1/+1 | |
| gdb/ChangeLog: Update copyright year range in all GDB files | |||||
| 2017-09-16 | Add selftests run filtering | Simon Marchi | 1 | -2/+4 | |
| With the growing number of selftests, I think it would be useful to be able to run only a subset of the tests. This patch associates a name to each registered selftest. It then allows doing something like: (gdb) maintenance selftest aarch64 Running self-tests. Running selftest aarch64-analyze-prologue. Running selftest aarch64-process-record. Ran 2 unit tests, 0 failed or with gdbserver: ./gdbserver --selftest=aarch64 In both cases, only the tests that contain "aarch64" in their name are ran. To help validate that the tests you want to run were actually ran, it also prints a message with the test name before running each test. Right now, all the arch-dependent tests are registered as a single test of the selftests. To be able to filter those too, I made them "first-class citizen" selftests. The selftest type is an interface, with different implementations for "simple selftests" and "arch selftests". The run_tests function simply iterates on that an invokes operator() on each test. I changed the tests data structure from a vector to a map, because - it allows iterating in a stable (alphabetical) order - it allows to easily verify if a test with a given name has been registered, to avoid duplicates There's also a new command "maintenance info selftests" that lists the registered selftests. gdb/ChangeLog: * common/selftest.h (selftest): New struct/interface. (register_test): Add name parameter, add new overload. (run_tests): Add filter parameter. (for_each_selftest_ftype): New typedef. (for_each_selftest): New declaration. * common/selftest.c (tests): Change type to map<string, unique_ptr<selftest>>. (simple_selftest): New struct. (register_test): New function. (register_test): Add name parameter and use it. (run_tests): Add filter parameter and use it. Add prints. Adjust to vector -> map change. * aarch64-tdep.c (_initialize_aarch64_tdep): Add names when registering selftests. * arm-tdep.c (_initialize_arm_tdep): Likewise. * disasm-selftests.c (_initialize_disasm_selftests): Likewise. * dwarf2-frame.c (_initialize_dwarf2_frame): Likewise. * dwarf2loc.c (_initialize_dwarf2loc): Likewise. * findvar.c (_initialize_findvar): Likewise. * gdbarch-selftests.c (_initialize_gdbarch_selftests): Likewise. * maint.c (maintenance_selftest): Update call to run_tests. (maintenance_info_selftests): New function. (_initialize_maint_cmds): Register "maintenance info selftests" command. Update "maintenance selftest" doc. * regcache.c (_initialize_regcache): Add names when registering selftests. * rust-exp.y (_initialize_rust_exp): Likewise. * selftest-arch.c (gdbarch_selftest): New struct. (gdbarch_tests): Remove. (register_test_foreach_arch): Add name parameter. Call register_test. (tests_with_arch): Remove, move most content to gdbarch_selftest::operator(). (_initialize_selftests_foreach_arch): Remove. * selftest-arch.h (register_test_foreach_arch): Add name parameter. (run_tests_with_arch): New declaration. * utils-selftests.c (_initialize_utils_selftests): Add names when registering selftests. * utils.c (_initialize_utils): Likewise. * unittests/array-view-selftests.c (_initialize_array_view_selftests): Likewise. * unittests/environ-selftests.c (_initialize_environ_selftests): Likewise. * unittests/function-view-selftests.c (_initialize_function_view_selftests): Likewise. * unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Likewise. * unittests/optional-selftests.c (_initialize_optional_selftests): Likewise. * unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Likewise. * NEWS: Document "maintenance selftest" and "maint info selftests". gdb/gdbserver/ChangeLog: * server.c (captured_main): Accept argument for --selftest. Update run_tests call. * linux-x86-tdesc-selftest.c (initialize_low_tdesc): Add names when registering selftests. gdb/doc/ChangeLog: * gdb.texinfo (Maintenance Commands): Document filter parameter of "maint selftest". Document "maint info selftests" command. | |||||
| 2017-09-09 | Remove unnecessary function prototypes. | John Baldwin | 1 | -3/+0 | |
| These prototypes were required when compiling GDB as C but are not required for C++. gdb/ChangeLog: * aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat prototype. * aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep prototype. * aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep prototype. * aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype. * ada-exp.y: Remove _initialize_ada_exp prototype. * ada-lang.c: Remove _initialize_ada_language prototype. * ada-tasks.c: Remove _initialize_tasks prototype. * addrmap.c: Remove _initialize_addrmap prototype. * agent.c: Remove _initialize_agent prototype. * aix-thread.c: Remove _initialize_aix_thread prototype. * alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype. * alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype. * alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep prototype. * alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype. * alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype. * alpha-tdep.c: Remove _initialize_alpha_tdep prototype. * amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep prototype. * amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep prototype. * amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype. * amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype. * amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype. * amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep prototype. * amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype. * amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype. * amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype. * amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype. * amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * amd64-tdep.c: Remove _initialize_amd64_tdep prototype. * amd64-windows-nat.c: Remove _initialize_amd64_windows_nat prototype. * amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep prototype. * annotate.c: Remove _initialize_annotate prototype. * arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype. * arc-tdep.c: Remove _initialize_arc_tdep prototype. * arch-utils.c: Remove _initialize_gdbarch_utils prototype. * arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype. * arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype. * arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype. * arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype. * arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep prototype. * arm-tdep.c: Remove _initialize_arm_tdep prototype. * arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype. * auto-load.c: Remove _initialize_auto_load prototype. * auxv.c: Remove _initialize_auxv prototype. * avr-tdep.c: Remove _initialize_avr_tdep prototype. * ax-gdb.c: Remove _initialize_ax_gdb prototype. * bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype. * bfin-tdep.c: Remove _initialize_bfin_tdep prototype. * break-catch-sig.c: Remove _initialize_break_catch_sig prototype. * break-catch-syscall.c: Remove _initialize_break_catch_syscall prototype. * break-catch-throw.c: Remove _initialize_break_catch_throw prototype. * breakpoint.c: Remove _initialize_breakpoint prototype. * bsd-uthread.c: Remove _initialize_bsd_uthread prototype. * btrace.c: Remove _initialize_btrace prototype. * charset.c: Remove _initialize_charset prototype. * cli/cli-cmds.c: Remove _initialize_cli_cmds prototype. * cli/cli-dump.c: Remove _initialize_cli_dump prototype. * cli/cli-interp.c: Remove _initialize_cli_interp prototype. * cli/cli-logging.c: Remove _initialize_cli_logging prototype. * cli/cli-script.c: Remove _initialize_cli_script prototype. * coff-pe-read.c: Remove _initialize_coff_pe_read prototype. * coffread.c: Remove _initialize_coffread prototype. * compile/compile.c: Remove _initialize_compile prototype. * complaints.c: Remove _initialize_complaints prototype. * completer.c: Remove _initialize_completer prototype. * copying.awk: Remove _initialize_copying prototype. * copying.c: Regenerate. * core-regset.c: Remove _initialize_core_regset prototype. * corefile.c: Remove _initialize_core prototype. * corelow.c: Remove _initialize_corelow prototype. * cp-abi.c: Remove _initialize_cp_abi prototype. * cp-namespace.c: Remove _initialize_cp_namespace prototype. * cp-support.c: Remove _initialize_cp_support prototype. * cp-valprint.c: Remove _initialize_cp_valprint prototype. * cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype. * cris-tdep.c: Remove _initialize_cris_tdep prototype. * ctf.c: Remove _initialize_ctf prototype. * d-lang.c: Remove _initialize_d_language prototype. * darwin-nat-info.c: Remove _initialize_darwin_info_commands prototype. * darwin-nat.c: Remove _initialize_darwin_inferior prototype. * dbxread.c: Remove _initialize_dbxread prototype. * dcache.c: Remove _initialize_dcache prototype. * demangle.c: Remove _initialize_demangler prototype. * disasm-selftests.c: Remove _initialize_disasm_selftests prototype. * disasm.c: Remove _initialize_disasm prototype. * dtrace-probe.c: Remove _initialize_dtrace_probe prototype. * dummy-frame.c: Remove _initialize_dummy_frame prototype. * dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame prototype. * dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype. * dwarf2expr.c: Remove _initialize_dwarf2expr prototype. * dwarf2loc.c: Remove _initialize_dwarf2loc prototype. * dwarf2read.c: Remove _initialize_dwarf2_read prototype. * elfread.c: Remove _initialize_elfread prototype. * exec.c: Remove _initialize_exec prototype. * extension.c: Remove _initialize_extension prototype. * f-lang.c: Remove _initialize_f_language prototype. * f-valprint.c: Remove _initialize_f_valprint prototype. * fbsd-nat.c: Remove _initialize_fbsd_nat prototype. * fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype. * filesystem.c: Remove _initialize_filesystem prototype. * findcmd.c: Remove _initialize_mem_search prototype. * fork-child.c: Remove _initialize_fork_child prototype. * frame-base.c: Remove _initialize_frame_base prototype. * frame-unwind.c: Remove _initialize_frame_unwind prototype. * frame.c: Remove _initialize_frame prototype. * frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype. * frv-tdep.c: Remove _initialize_frv_tdep prototype. * ft32-tdep.c: Remove _initialize_ft32_tdep prototype. * gcore.c: Remove _initialize_gcore prototype. * gdb_bfd.c: Remove _initialize_gdb_bfd prototype. * gdbarch.c: Regenerate. * gdbarch.sh: Remove _initialize_gdbarch prototype. * gdbtypes.c: Remove _initialize_gdbtypes prototype. * gnu-nat.c: Remove _initialize_gnu_nat prototype. * gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype. * gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype. * go-lang.c: Remove _initialize_go_language prototype. * go32-nat.c: Remove _initialize_go32_nat prototype. * guile/guile.c: Remove _initialize_guile prototype. * h8300-tdep.c: Remove _initialize_h8300_tdep prototype. * hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype. * hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype. * hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype. * hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype. * hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype. * hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype. * hppa-tdep.c: Remove _initialize_hppa_tdep prototype. * i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype. * i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep prototype. * i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep prototype. * i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype. * i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype. * i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype. * i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype. * i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype. * i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype. * i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype. * i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype. * i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype. * i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype. * i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype. * i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype. * i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype. * i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * i386-tdep.c: Remove _initialize_i386_tdep prototype. * i386-windows-nat.c: Remove _initialize_i386_windows_nat prototype. * ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame prototype. * ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype. * ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype. * ia64-tdep.c: Remove _initialize_ia64_tdep prototype. * ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype. * infcall.c: Remove _initialize_infcall prototype. * infcmd.c: Remove _initialize_infcmd prototype. * inferior.c: Remove _initialize_inferiors prototype. * inflow.c: Remove _initialize_inflow prototype. * infrun.c: Remove _initialize_infrun prototype. * interps.c: Remove _initialize_interpreter prototype. * iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype. * jit.c: Remove _initialize_jit prototype. * language.c: Remove _initialize_language prototype. * linux-fork.c: Remove _initialize_linux_fork prototype. * linux-nat.c: Remove _initialize_linux_nat prototype. * linux-tdep.c: Remove _initialize_linux_tdep prototype. * linux-thread-db.c: Remove _initialize_thread_db prototype. * lm32-tdep.c: Remove _initialize_lm32_tdep prototype. * m2-lang.c: Remove _initialize_m2_language prototype. * m32c-tdep.c: Remove _initialize_m32c_tdep prototype. * m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype. * m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype. * m32r-tdep.c: Remove _initialize_m32r_tdep prototype. * m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype. * m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-tdep.c: Remove _initialize_m68k_tdep prototype. * m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * machoread.c: Remove _initialize_machoread prototype. * macrocmd.c: Remove _initialize_macrocmd prototype. * macroscope.c: Remove _initialize_macroscope prototype. * maint.c: Remove _initialize_maint_cmds prototype. * mdebugread.c: Remove _initialize_mdebugread prototype. * memattr.c: Remove _initialize_mem prototype. * mep-tdep.c: Remove _initialize_mep_tdep prototype. * mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype. * mi/mi-cmds.c: Remove _initialize_mi_cmds prototype. * mi/mi-interp.c: Remove _initialize_mi_interp prototype. * mi/mi-main.c: Remove _initialize_mi_main prototype. * microblaze-linux-tdep.c: Remove _initialize_microblaze_linux_tdep prototype. * microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype. * mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype. * mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype. * mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype. * mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype. * mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype. * mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype. * mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype. * mips-tdep.c: Remove _initialize_mips_tdep prototype. * mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype. * mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep prototype. * mipsread.c: Remove _initialize_mipsread prototype. * mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep prototype. * mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype. * moxie-tdep.c: Remove _initialize_moxie_tdep prototype. * msp430-tdep.c: Remove _initialize_msp430_tdep prototype. * mt-tdep.c: Remove _initialize_mt_tdep prototype. * nds32-tdep.c: Remove _initialize_nds32_tdep prototype. * nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep prototype. * nios2-tdep.c: Remove _initialize_nios2_tdep prototype. * nto-procfs.c: Remove _initialize_procfs prototype. * nto-tdep.c: Remove _initialize_nto_tdep prototype. * objc-lang.c: Remove _initialize_objc_language prototype. * objfiles.c: Remove _initialize_objfiles prototype. * observer.c: Remove observer_test_first_notification_function, observer_test_second_notification_function, observer_test_third_notification_function, and _initialize_observer prototypes. * opencl-lang.c: Remove _initialize_opencl_language prototypes. * osabi.c: Remove _initialize_gdb_osabi prototype. * osdata.c: Remove _initialize_osdata prototype. * p-valprint.c: Remove _initialize_pascal_valprint prototype. * parse.c: Remove _initialize_parse prototype. * ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype. * ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype. * ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype. * ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype. * ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype. * ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype. * ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype. * ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype. * printcmd.c: Remove _initialize_printcmd prototype. * probe.c: Remove _initialize_probe prototype. * proc-api.c: Remove _initialize_proc_api prototype. * proc-events.c: Remove _initialize_proc_events prototype. * proc-service.c: Remove _initialize_proc_service prototype. * procfs.c: Remove _initialize_procfs prototype. * psymtab.c: Remove _initialize_psymtab prototype. * python/python.c: Remove _initialize_python prototype. * ravenscar-thread.c: Remove _initialize_ravenscar prototype. * record-btrace.c: Remove _initialize_record_btrace prototype. * record-full.c: Remove _initialize_record_full prototype. * record.c: Remove _initialize_record prototype. * regcache.c: Remove _initialize_regcache prototype. * reggroups.c: Remove _initialize_reggroup prototype. * remote-notif.c: Remove _initialize_notif prototype. * remote-sim.c: Remove _initialize_remote_sim prototype. * remote.c: Remove _initialize_remote prototype. * reverse.c: Remove _initialize_reverse prototype. * rl78-tdep.c: Remove _initialize_rl78_tdep prototype. * rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype. * rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep prototype. * rs6000-nat.c: Remove _initialize_rs6000_nat prototype. * rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype. * rust-exp.y: Remove _initialize_rust_exp prototype. * rx-tdep.c: Remove _initialize_rx_tdep prototype. * s390-linux-nat.c: Remove _initialize_s390_nat prototype. * s390-linux-tdep.c: Remove _initialize_s390_tdep prototype. * score-tdep.c: Remove _initialize_score_tdep prototype. * selftest-arch.c: Remove _initialize_selftests_foreach_arch prototype. * ser-go32.c: Remove _initialize_ser_dos prototype. * ser-mingw.c: Remove _initialize_ser_windows prototype. * ser-pipe.c: Remove _initialize_ser_pipe prototype. * ser-tcp.c: Remove _initialize_ser_tcp prototype. * ser-unix.c: Remove _initialize_ser_hardwire prototype. * serial.c: Remove _initialize_serial prototype. * sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype. * sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype. * sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype. * sh-tdep.c: Remove _initialize_sh_tdep prototype. * skip.c: Remove _initialize_step_skip prototype. * sol-thread.c: Remove _initialize_sol_thread prototype. * solib-aix.c: Remove _initialize_solib_aix prototype. * solib-darwin.c: Remove _initialize_darwin_solib prototype. * solib-dsbt.c: Remove _initialize_dsbt_solib prototype. * solib-frv.c: Remove _initialize_frv_solib prototype. * solib-spu.c: Remove _initialize_spu_solib prototype. * solib-svr4.c: Remove _initialize_svr4_solib prototype. * solib-target.c: Remove _initialize_solib_target prototype. * solib.c: Remove _initialize_solib prototype. * source.c: Remove _initialize_source prototype. * sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype. * sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep prototype. * sparc-nat.c: Remove _initialize_sparc_nat prototype. * sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype. * sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype. * sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep prototype. * sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype. * sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype. * sparc-tdep.c: Remove _initialize_sparc_tdep prototype. * sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat prototype. * sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep prototype. * sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat prototype. * sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep prototype. * sparc64-nat.c: Remove _initialize_sparc64_nat prototype. * sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat prototype. * sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep prototype. * sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat prototype. * sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep prototype. * sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep prototype. * spu-linux-nat.c: Remove _initialize_spu_nat prototype. * spu-multiarch.c: Remove _initialize_spu_multiarch prototype. * spu-tdep.c: Remove _initialize_spu_tdep prototype. * stabsread.c: Remove _initialize_stabsread prototype. * stack.c: Remove _initialize_stack prototype. * stap-probe.c: Remove _initialize_stap_probe prototype. * std-regs.c: Remove _initialize_frame_reg prototype. * symfile-debug.c: Remove _initialize_symfile_debug prototype. * symfile-mem.c: Remove _initialize_symfile_mem prototype. * symfile.c: Remove _initialize_symfile prototype. * symmisc.c: Remove _initialize_symmisc prototype. * symtab.c: Remove _initialize_symtab prototype. * target-dcache.c: Remove _initialize_target_dcache prototype. * target-descriptions.c: Remove _initialize_target_descriptions prototype. * thread.c: Remove _initialize_thread prototype. * tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep prototype. * tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype. * tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype. * tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep prototype. * tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype. * tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype. * tracefile.c: Remove _initialize_tracefile prototype. * tracepoint.c: Remove _initialize_tracepoint prototype. * tui/tui-hooks.c: Remove _initialize_tui_hooks prototype. * tui/tui-interp.c: Remove _initialize_tui_interp prototype. * tui/tui-layout.c: Remove _initialize_tui_layout prototype. * tui/tui-regs.c: Remove _initialize_tui_regs prototype. * tui/tui-stack.c: Remove _initialize_tui_stack prototype. * tui/tui-win.c: Remove _initialize_tui_win prototype. * tui/tui.c: Remove _initialize_tui prototype. * typeprint.c: Remove _initialize_typeprint prototype. * user-regs.c: Remove _initialize_user_regs prototype. * utils.c: Remove _initialize_utils prototype. * v850-tdep.c: Remove _initialize_v850_tdep prototype. * valarith.c: Remove _initialize_valarith prototype. * valops.c: Remove _initialize_valops prototype. * valprint.c: Remove _initialize_valprint prototype. * value.c: Remove _initialize_values prototype. * varobj.c: Remove _initialize_varobj prototype. * vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype. * vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype. * vax-tdep.c: Remove _initialize_vax_tdep prototype. * windows-nat.c: Remove _initialize_windows_nat, _initialize_check_for_gdb_ini, and _initialize_loadable prototypes. * windows-tdep.c: Remove _initialize_windows_tdep prototype. * xcoffread.c: Remove _initialize_xcoffread prototype. * xml-support.c: Remove _initialize_xml_support prototype. * xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype. * xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat prototype. * xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep prototype. * xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype. | |||||
| 2017-08-18 | Put selftests api into selftests namespace | Yao Qi | 1 | -2/+2 | |
| This patch changes register_self_test to selftests::register_test, and run_self_tests to selftest::run_tests. gdb: 2017-08-18 Yao Qi <yao.qi@linaro.org> * selftest.c (register_self_test): Rename it to selftests::register_test. (run_self_tests): selftest::run_tests. * selftest.h: Update declarations. * selftest-arch.c (register_self_test_foreach_arch): Rename it to selftests::register_test_foreach_arch. * selftest-arch.h: Update declaration. * aarch64-tdep.c: Update. * arm-tdep.c: Likewise. * disasm-selftests.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2-frame.c: Likewise. * findvar.c: Likewise. * gdbarch-selftests.c: Likewise. * maint.c (maintenance_selftest): Likewise. * regcache.c: Likewise. * rust-exp.y: Likewise. * selftest-arch.c: Likewise. * unittests/environ-selftests.c: Likewise. * unittests/function-view-selftests.c: Likewise. * unittests/offset-type-selftests.c: Likewise. * unittests/optional-selftests.c: Likewise. * unittests/scoped_restore-selftests.c: Likewise. * utils-selftests.c: Likewise. | |||||
| 2017-02-02 | Fix "maintenance selftest" printing stray instructions | Pedro Alves | 1 | -2/+1 | |
| The "maintenance selftest" command is printing odd bits of stray instructions like: ~~~ brkwarning: A handler for the OS ABI "GNU/Linux" is not built into this configuration of GDB. Attempting to continue with the default HS settings. brkmov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0breakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakM3.L = 0xffff;/* ( -1) M3=0x0xffff(65535) */break 8break 8warning: A handler for the OS ABI "GNU/Linux" is not built into this configuration of GDB. Attempting to continue with the default cris:common_v10_v32 settings. ~~~ etc. Those appear because here: class gdb_disassembler_test : public gdb_disassembler { public: const bool verbose = false; explicit gdb_disassembler_test (struct gdbarch *gdbarch, const gdb_byte *insn, size_t len) : gdb_disassembler (gdbarch, (verbose ? gdb_stdout : &null_stream), gdb_disassembler_test::read_memory), specifically in this line: (verbose ? gdb_stdout : &null_stream), "verbose" has not been initialized yet, because the order of initialization is base classes first, then members. I.e. "verbose" is only initialized after the base constructor is called. Since the gdb_disassembler_test object is created on the stack, "verbose" has garbage at that point. If the gargage is non-zero, then we end up with the gdb_disassembler_test's stream incorrectly pointing to gdb_stdout. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * disasm-selftests.c (print_one_insn_test): Move the "verbose" field out of gdb_disassembler_test and make it static. | |||||
| 2017-02-02 | Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy | Pedro Alves | 1 | -2/+2 | |
| This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate. | |||||
| 2017-01-26 | Disassembly unit test: memory error | Yao Qi | 1 | -0/+42 | |
| This patch adds a unit test about memory error occurs on reading memory, and check MEMORY_ERROR exception is always thrown. gdb: 2017-01-26 Yao Qi <yao.qi@linaro.org> * disasm-selftests.c (memory_error_test): New function. (_initialize_disasm_selftests): Register memory_error_test. | |||||
| 2017-01-26 | Disassembly unit test: disassemble one instruction | Yao Qi | 1 | -0/+179 | |
| This patch adds one unit test, which disassemble one instruction for every gdbarch if available. The test needs one valid instruction of each gdbarch, and most of them are got from breakpoint instruction. For the rest gdbarch whose breakpoint instruction isn't a valid instruction, I copy one instruction from the gas/testsuite/gas/ directory. I get the valid instruction of most gdbarch except ia64, mep, mips, tic6x, and xtensa. People familiar with these arch should be easy to extend the test. In order to achieve "do the unit test for every gdbarch", I add selftest-arch.[c,h], so that we can register a function pointer, which has one argument gdbarch. selftest.c will iterate over all gdbarches to call the registered function pointer. gdb: 2017-01-26 Yao Qi <yao.qi@linaro.org> * Makefile.in (SFILES): Add disasm-selftests.c and selftest-arch.c. (COMMON_OBS): Add disasm-selftests.o and selftest-arch.o. * disasm-selftests.c: New file. * selftest-arch.c: New file. * selftest-arch.h: New file. | |||||
 |
index : riscv-gnu-toolchain/gdb.git | |
| Unnamed repository; edit this file 'description' to name the repository. | root |
| aboutsummaryrefslogtreecommitdiff |