aboutsummaryrefslogtreecommitdiff
path: root/gdb/configure
AgeCommit message (Collapse)AuthorFilesLines
2019-08-23Move gdb-dlfcn.[ch] to gdbsupport/Sergio Durigan Junior1-3/+2
I need to use 'gdb_dlopen' inside 'gdbsupport/', but it's not yet supported there. This commit moves 'gdb-dlfcn.[ch]' to 'gdbsupport/', which makes it available also on gdbserver. gdb/ChangeLog: 2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com> * configure.ac: Don't check for 'dlfcn.h' (moved to gdbsupport/common.m4). * Makefile.in (COMMON_SFILES): Move 'gdb-dlfcn.c' to 'gdbsupport/'. (HFILES_NO_SRCDIR): Likewise, for 'gdb-dlfcn.h'. * compile/compile-c-support.c: Include 'gdbsupport/gdb-dlfcn.h'. * gdbsupport/common.m4: Check for 'dlfcn.h'. * gdb-dlfcn.c: Move to... * gdbsupport/gdb-dlfcn.c: ... here. * gdb-dlfcn.h: Move to... * gdbsupport/gdb-dlfcn.h: ... here. gdb/gdbserver/ChangeLog: 2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (SFILES): Add 'gdbsupport/gdb-dlfcn.c'. (OBS): Add 'gdbsupport/gdb-dlfcn.o'. * config.in: Regenerate. * configure: Regenerate.
2019-08-19Add Rust support to source highlightingTom Tromey1-0/+6
Currently, no release of GNU Source Highlight supports Rust. However, I've checked in a patch to do so there, and I plan to make a new release sometime this summer. This patch prepares gdb for that by adding support for Rust to the source highlighting code. Because Source Highlight will throw an exception if the language is unrecognized, this also changes gdb to ignore exceptions here. This will cause gdb to fall back to un-highlighted source text. This updates gdb's configure script to reject the combination of Source Highlight and -static-libstdc++. This is done because it's not possible to use -static-libstdc++ and then catch exceptions from a shared library. Tested with the current and development versions of Source Highlight. gdb/ChangeLog 2019-08-19 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Disallow the combination of -static-libstdc++ and source highlight. * source-cache.c (get_language_name): Handle rust. (source_cache::get_source_lines): Ignore highlighting exceptions.
2019-08-12Require readline 7 or newerTom Tromey1-0/+32
This changes gdb to require readline 7 or newer at build time. gdb/ChangeLog 2019-08-12 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Check for readline 7. * NEWS: Mention readline 7 requirement. * README: Update. gdb/doc/ChangeLog 2019-08-12 Tom Tromey <tom@tromey.com> * gdb.texinfo (Configure Options): Document minimum version of readline.
2019-08-06[PR build/24886] disable glibc mcheck supportFrank Ch. Eigler1-81/+0
This patch drops gdb's configury support for glibc's mcheck function. It has been observed to cause false abort()s, because it is thread-unsafe yet interposes every malloc/free operation. So if any library transitively used by gdb also uses threads, then these functions can easily corrupt their own checking data. These days, gcc ASAN and valgrind provide high quality checking, and mcheck is apparently itself being slowly deprecated. So, let's stop linking to it. Attached patch drops the autoconf/Makefile machinery for both gdb and gdbserver. No testsuite-visible impact. IMHO not worth mentioning in NEWS. See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939 gdb/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * libmcheck.m4: Remove. * acinclude.m4: Don't include it. * Makefile.in: Don't distribute it. * top.c (print_gdb_configuration): Don't mention it. gdb/gdbserver/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * acinclude.m4: Don't include it.
2019-07-09Rename common to gdbsupportTom Tromey1-3/+3
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-06-14Move gnulib to top levelTom Tromey1-123/+0
This patch moves the gdb/gnulib subdirectory to the top level. It adjusts the top-level build system to build gnulib when necessary, and changes gdb to use this. However, gdbserver still builds its own copy of gnulib, just from the new source location. A small hack was needed to ensure that gnulib is only built when gdb is enabled. The Makefile only provides an ordering -- the directory must be mentioned in configdirs to actually be compiled at all. Most of the patch is just a "git mv" of gnulib, though a few minor path adjustments were needed in some files there. Tested by the buildbot. ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * MAINTAINERS: Add gnulib. * gnulib: New directory, move from gdb/gnulib. * configure.ac (host_libs): Add gnulib. * configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * gnulib: Move directory to top-level. * configure.ac: Don't configure gnulib. * configure: Rebuild. * common/common-defs.h: Use new path to gnulib. * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib. (GNULIB_H): Remove. (INCGNU): Look in new gnulib location. (HFILES_NO_SRCDIR): Remove gnulib files. (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib. (generated_files): Remove GNULIB_H. ($(LIBGNU), all-lib): Remove targets. (distclean): Don't mention GNULIB_BUILDDIR. ($(GNULIB_BUILDDIR)/Makefile): Remove target. gdb/gdbserver/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * configure.ac: Use new path to gnulib. * configure: Rebuild. * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path to gnulib. gnulib/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * update-gnulib.sh: Adjust paths. * Makefile.in: Adjust paths. * configure.ac: Adjust paths. Use ACX_LARGEFILE. * configure: Rebuild.
2019-05-29Add new GCC 9 warnings to warnings.m4Tom Tromey1-1/+4
GCC 9 has a few new warnings that aren't enabled in the gdb build by default: -Wdeprecated-copy, -Wdeprecated-copy-dtor, and -Wredundant-move. This patch enables them all. Tested by rebuilding with a new GCC (git master) on x86-64 Fedora 29. gdb/ChangeLog 2019-05-29 Tom Tromey <tromey@adacore.com> * inflow.c (struct terminal_info): Add default operator=. * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Add -Wdeprecated-copy, -Wdeprecated-copy-dtor, -Wredundant-move. gdb/gdbserver/ChangeLog 2019-05-29 Tom Tromey <tromey@adacore.com> * configure: Rebuild.
2019-04-19gdb/configure.ac: add --enable-source-highlightSergei Trofimovich1-7/+31
Allow disabling source-highlight dependency autodetection even it exists in the system. More details on problem of automatic dependencies: https://wiki.gentoo.org/wiki/Project:Quality_Assurance/Automagic_dependencies Noticed by Jeroen Roovers in https://bugs.gentoo.org/680238 * configure.ac: add --enable-source-highlight switch. * configure: Regenerate. * top.c (print_gdb_version): plumb --enable-source-highlight status to "show configuration". gdb/ChangeLog 2019-04-19 Sergei Trofimovich <siarheit@google.com> * configure.ac: add --enable-source-highlight switch. * configure: Regenerate. * top.c (print_gdb_version): plumb --enable-source-highlight status to "show configuration".
2019-02-27Remove Python 2.4 and 2.5 supportTom Tromey1-86/+2
This removes all the remainings spots I could find that work around issues in Python 2.4 and 2.5. I don't have a good way to test that Python 2.6 still works. Tested by the buildbot. gdb/ChangeLog 2019-02-27 Tom Tromey <tromey@adacore.com> * config.in, configure: Rebuild. * configure.ac (HAVE_LIBPYTHON2_4, HAVE_LIBPYTHON2_5): Never define. * python/py-value.c: Remove Python 2.4 workaround. * python/py-utils.c (gdb_pymodule_addobject): Remove Python 2.4 workaround. * python/py-type.c (convert_field, gdbpy_initialize_types): Remove Python 2.4 workaround. * python/python-internal.h: Remove Python 2.4 comment. (Py_ssize_t): Don't define. (PyVarObject_HEAD_INIT, Py_TYPE): Don't define. (gdb_Py_DECREF): Remove Python 2.4 workaround. (gdb_PyObject_GetAttrString, PyObject_GetAttrString): Remove. (gdb_PyObject_HasAttrString, PyObject_HasAttrString): Remove. * python/python.c (do_start_initialization): Remove Python 2.4 workaround. * python/py-prettyprint.c (class dummy_python_frame): Remove. (print_children): Remove Python 2.4 workaround. * python/py-inferior.c (buffer_procs): Remove Python 2.4 workaround. (CHARBUFFERPROC_NAME): Remove. * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Remove Python 2.4 workaround. gdb/testsuite/ChangeLog 2019-02-27 Tom Tromey <tromey@adacore.com> * lib/gdb.exp (skip_python_tests_prompt): Don't check for Python 2.4. * gdb.python/py-finish-breakpoint.exp: Remove Python 2.4 workaround. gdb/ChangeLog 2019-02-27 Tom Tromey <tromey@adacore.com> * config.in, configure: Rebuild. * configure.ac (HAVE_LIBPYTHON2_4, HAVE_LIBPYTHON2_5): Never define. * python/py-value.c: Remove Python 2.4 workaround. * python/py-utils.c (gdb_pymodule_addobject): Remove Python 2.4 workaround. * python/py-type.c (convert_field, gdbpy_initialize_types): Remove Python 2.4 workaround. * python/python-internal.h: Remove Python 2.4 comment. (Py_ssize_t): Don't define. (PyVarObject_HEAD_INIT, Py_TYPE): Don't define. (gdb_Py_DECREF): Remove Python 2.4 workaround. (gdb_PyObject_GetAttrString, PyObject_GetAttrString): Remove. (gdb_PyObject_HasAttrString, PyObject_HasAttrString): Remove. * python/python.c (do_start_initialization): Remove Python 2.4 workaround. * python/py-prettyprint.c (class dummy_python_frame): Remove. (print_children): Remove Python 2.4 workaround. * python/py-inferior.c (buffer_procs): Remove Python 2.4 workaround. (CHARBUFFERPROC_NAME): Remove. * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Remove Python 2.4 workaround.
2018-12-28Highlight source code using GNU Source HighlightTom Tromey1-0/+30
This changes gdb to highlight source using GNU Source Highlight, if it is available. This affects the output of the "list" command and also the TUI source window. No new test because I didn't see a way to make it work when Source Highlight is not found. gdb/ChangeLog 2018-12-28 Tom Tromey <tom@tromey.com> * utils.h (can_emit_style_escape): Declare. * utils.c (can_emit_style_escape): No longer static. * cli/cli-style.c (set_style_enabled): New function. (_initialize_cli_style): Use it. * tui/tui-winsource.c (tui_show_source_line): Use tui_puts. (tui_alloc_source_buffer): Change how source lines are allocated. * tui/tui-source.c (copy_source_line): New function. (tui_set_source_content): Use source cache. * tui/tui-io.h (tui_puts): Update. * tui/tui-io.c (tui_puts_internal): Add window parameter. (tui_puts): Likewise. (tui_redisplay_readline): Update. * tui/tui-data.c (free_content_elements): Change how source window contents are freed. * source.c (forget_cached_source_info): Clear the source cache. (print_source_lines_base): Use the source cache. * source-cache.h: New file. * source-cache.c: New file. * configure.ac: Check for GNU Source Highlight library. * configure: Update. * config.in: Update. * Makefile.in (SRCHIGH_LIBS, SRCHIGH_CFLAGS): New variables. (INTERNAL_CFLAGS_BASE): Add SRCHIGH_CFLAGS. (CLIBS): Add SRCHIGH_LIBS. (COMMON_SFILES): Add source-cache.c. (HFILES_NO_SRCDIR): Add source-cache.h.
2018-12-28Make ANSI terminal escape sequences work in TUITom Tromey1-1/+1
PR tui/14126 notes that ANSI terminal escape sequences don't affect the colors shown in the TUI. A simple way to see this is to try the extended-prompt example from the gdb manual. Curses does not pass escape sequences through to the terminal. Instead, it replaces non-printable characters with a visible representation, for example "^[" for the ESC character. This patch fixes the problem by adding a simple ANSI terminal sequence parser to gdb. These sequences are decoded and those that are recognized are turned into the appropriate curses calls. The curses approach to color handling is unusual and so there are some oddities in the implementation. Standard curses has no notion of the default colors of the terminal. So, if you set the foreground color, it is not possible to reset it -- you have to pick some other color. ncurses provides an extension to handle this, so this patch updates configure and uses it when available. Second, in curses, colors always come in pairs: you cannot set just the foreground. This patch handles this by tracking actually-used pairs of colors and keeping a table of these for reuse. Third, there are a limited number of such pairs available. In this patch, if you try to use too many color combinations, gdb will just ignore some color changes. Finally, in addition to limiting the number of color pairs, curses also limits the number of colors. This means that, when using extended 8- or 24-bit color sequences, it may be possible to exhaust the curses color table. I am very sour on the curses design now. I do not know how to write a test for this, so I did not. gdb/ChangeLog 2018-12-28 Tom Tromey <tom@tromey.com> PR tui/14126: * tui/tui.c (tui_enable): Call start_color and use_default_colors. * tui/tui-io.c (struct color_pair): New. (color_pair_map, last_color_pair, last_style): New globals. (tui_setup_io): Clean up color map when shutting down. (curses_colors): New constant. (get_color_pair, apply_ansi_escape): New functions. (tui_write): Rewrite. (tui_puts_internal): New function, from tui_puts. Add "height" parameter. (tui_puts): Use tui_puts_internal. (tui_redisplay_readline): Use tui_puts_internal. (_initialize_tui_io): New function. (color_map): New globals. (get_color): New function. * configure.ac: Check for use_default_colors. * config.in, configure: Rebuild.
2018-12-08Look for tgetent in libtinfowSimon Marchi1-1/+1
On some systems where ncurses is only available in the "wide" version (compiled with --with-widec), there might be no libtinfo.so, only a libtinfow.so. Look for libtinfow in addition to libtinfo. gdb/ChangeLog: YYYY-MM-DD Simon Marchi <simon.marchi@ericsson.com> Дилян Палаузов <dilyan.palauzov@aegee.org> PR gdb/23950 * configure.ac: Search for tgetent in libtinfow. * configure: Re-generate.
2018-12-05Use separate sed expressions to escape auto-load directories.John Baldwin1-2/+2
Not all sed implementations support alternation via \| in the default regular expressions. Instead, resort to separate sed expressions via -e for $debugdir and $datadir. This fixes the default setting of the auto-load directories on FreeBSD. Previously on FreeBSD the sed invocation was a no-op causing the debugdir and datadir values to be expanded yielding an autoload path of ':${prefix}/share/gdb'. gdb/ChangeLog: * configure: Re-generate. * configure.ac: Use separate sed expressions to escape variables in auto-load directories.
2018-11-09Fix a typo in iconv.m4.Hafiz Abid Qadeer1-1/+1
config/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * iconv.m4 (AM_ICONV_LINK): Don't overwrite CPPFLAGS. Append $INCICONV to it. gdb/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * configure: Regenerate. binutils/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * configure: Regenerate. intl/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * configure: Regenerate.
2018-11-01Import mkdtemp gnulib module, fix mingw buildSimon Marchi1-1/+1
Building with mingw currently fails: CXX unittests/mkdir-recursive-selftests.o /home/emaisin/src/binutils-gdb/gdb/unittests/mkdir-recursive-selftests.c: In function ‘void selftests::mkdir_recursive::test()’: /home/emaisin/src/binutils-gdb/gdb/unittests/mkdir-recursive-selftests.c:49:20: error: ‘mkdtemp’ was not declared in this scope if (mkdtemp (base) == NULL) ^ Commit e418a61a67a ("Move mkdir_recursive to common/filestuff.c") moved this code, but also removed the HAVE_MKDTEMP guard which prevented the mkdtemp call to be compiled on mingw. We can either put back the HAVE_MKDTEMP ifdef, or import the gnulib mkdtemp module, which provides the function for mingw. Since the mkdir_recursive is susceptible to be used on mingw at some point, I think it would be nice to have it tested on mingw, so I did the latter. Once built, I tested it on Windows (copied the resulting gdb.exe on a Windows machine, ran it, and ran "maint selftest mkdir_recursive"). It failed, because the temporary directory is hardcoded to "/tmp/...". I therefore added and used a new get_standard_temp_dir function, which returns an appropriate temporary directory for the host platform. gdb/ChangeLog: * common/pathstuff.c (get_standard_temp_dir): New. * common/pathstuff.h (get_standard_temp_dir): New. * config.in: Re-generate. * configure: Re-generate. * configure.ac: Don't check for mkdtemp. * gnulib/aclocal-m4-deps.mk: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.am: Re-generate. * gnulib/import/Makefile.in: Re-generate. * gnulib/import/m4/gnulib-cache.m4: Re-generate. * gnulib/import/m4/gnulib-comp.m4: Re-generate. * gnulib/import/m4/mkdtemp.m4: New file. * gnulib/import/mkdtemp.c: New file. * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add mkdtemp module. * unittests/mkdir-recursive-selftests.c (test): Use get_standard_temp_dir. (_initialize_mkdir_recursive_selftests): Remove HAVE_MKDTEMP ifdef. * compile/compile.c (get_compile_file_tempdir): Likewise.
2018-10-29Revert "GDB: Only build for "unix:" connections if AF_LOCAL is supported."Simon Marchi1-21/+0
This reverts commit 98a17ece013cb94cd602496b9efb92b8816b3953.
2018-10-29GDB: Only build for "unix:" connections if AF_LOCAL is supported.John Darrington1-0/+21
Commit f19c7ff839d7a32ebb48482ae7d318fb46ca823d added a new member to the prefixes array which included a use of the symbol AF_LOCAL. Unfortunately, not all systems declare this symbol. This change only compiles the "unix:" member if the system knows about AF_LOCAL. gdb/ChangeLog: * configure.ac: New test HAVE_AF_LOCAL * common/netstuff.c (parse_connection_spec) [prefixes]: Only compile "unix:" if HAVE_AF_LOCAL is true. * configure: regenerate. * config.in: regenerate.
2018-10-10Add parameter to allow enabling/disabling selftests via configureSergio Durigan Junior1-1/+26
This is a follow-up of: https://sourceware.org/ml/gdb-patches/2018-08/msg00347.html Instead of going throttle and always enabling our selftests (even in non-development builds), this patch is a bit more conservative and introduces a configure option ("--enable-unit-tests") that allows the user to choose whether she wants unit tests in the build or not. Note that the current behaviour is retained: if no option is provided, GDB will have selftests included in a development build, and will *not* have selftests included in a non-development build. The rationale for having this option is still the same: due to the many racy testcases and random failures we see when running the GDB testsuite, it is unfortunately not possible to perform a full test when one is building a downstream package. As the Fedora GDB maintainer and one of the Debian GDB uploaders, I feel like this situation could be improved by, at least, executing our selftests after the package has been built. This patch introduces no regressions to our build. OK? gdb/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * README (`configure' options): Add documentation for new "--enable-unit-tests" option. * acinclude.m4: Include "selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * maint.c (maintenance_selftest): Update message informing that selftests have been disabled. (maintenance_info_selftests): Likewise. * selftest.m4: New file. gdb/gdbserver/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * acinclude.m4: Include "../selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * configure.srv: Use "$enable_unittests" instead of "$development" when checking whether unit tests have been enabled. * server.c (captured_main): Update message informing that selftests have been disabled. gdb/testsuite/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.gdb/unittest.exp: Update expected message informing that selftests have been disabled. * gdb.server/unittest.exp: Likewise. squash! Add parameter to allow enabling/disabling selftests via configure
2018-10-09Disable the undefined behavior sanitizer by defaultTom Tromey1-1/+1
There have been a few undefined behavior failures reported, and Pedro suggested that the sanitizer be disabled by default. This patch implements this. gdb/ChangeLog 2018-10-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * sanitize.m4 (AM_GDB_UBSAN): Default to no. * NEWS: Update --enable-ubsan documentation. gdb/doc/ChangeLog 2018-10-09 Tom Tromey <tom@tromey.com> * gdb.texinfo (Configure Options): Update --enable-ubsan documentation.
2018-10-04Add -Wshadow=localTom Tromey1-1/+2
This adds -Wshadow=local to configure. gdb/ChangeLog 2018-10-04 Tom Tromey <tom@tromey.com> * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Add -Wshadow=local. gdb/gdbserver/ChangeLog 2018-10-04 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-10-03Add --enable-ubsanTom Tromey1-0/+105
This adds --enable-ubsan to gdb's configure. By default it is enabled in development mode, and disabled otherwise. This passes both -fsanitize=undefined and -fno-sanitize-recover=undefined to compilations, so that undefined behavior violations will be sure to cause test failures. gdb/ChangeLog 2018-10-03 Tom Tromey <tom@tromey.com> * README: Mention --enable-ubsan. * NEWS: Mention --enable-ubsan. * acinclude.m4: Include sanitize.m4. * configure: Rebuild. * configure.ac: Call AM_GDB_UBSAN. * sanitize.m4: New file. gdb/doc/ChangeLog 2018-10-03 Tom Tromey <tom@tromey.com> * gdb.texinfo (Configure Options): Document --enable-ubsan.
2018-10-02Allow remote debugging over a Unix local domain socket.John Darrington1-0/+1
Extend the "target remote" and "target extended-remote" commands such that if the filename provided is a Unix local domain (AF_UNIX) socket, then it'll be treated as such, instead of trying to open it as if it were a character device. gdb/ChangeLog: * NEWS: Mention changed commands. * ser-uds.c: New file. * configure.ac (SER_HARDWIRE): Add ser-uds.o. * configure: Regenerate. * Makefile.in: Add new file. * serial.c (serial_open): Check if filename is a socket and lookup the appropriate interface accordingly. gdb/doc/ChangeLog: * gdb.texinfo (Remote Connection Commands): Describe the changes to target remote and target extended-remote relating to Unix domain sockets.
2018-10-01Remove ancient workaroundGary Benson1-41/+0
This commit removes a workaround for a bug in glibc 2.1.3, which was released 2000-02-24 and superseded 2000-11-09. gdb/ChangeLog: * gdb_proc_service.h (gdb_prfpregset_t): Remove typedef. * proc-service.c (ps_lgetfpregs, ps_lsetfpregs): Use prfpregset_t instead of gdb_prfpregset_t. * configure.ac (PRFPREGSET_T_BROKEN): Remove check. * configure, config.in: Rebuild.
2018-10-01Add workaround from gdbserver's gdb_proc_service.h to GDBGary Benson1-1/+38
This commit adds a workaround from gdbserver's gdb_proc_service.h to GDB's. It doesn't seem to have been needed on any glibc as far back as 2001, but it's possibly required for other C libraries so I've retained it. gdb/ChangeLog: * configure.ac: Check if sys/procfs.h defines elf_fpregset_t. (AC_CHECK_HEADERS): Check for linux/elf.h. * configure, config.in: Rebuild. * gdb_proc_service.h: Include linux/elf.h if sys/procfs.h doesn't define elf_fpregset_t.
2018-09-17Do not pass -DNDEBUG to Python compilations in development modeTom Tromey1-1/+5
The Python CFLAGS include -DNDEBUG. This was apparently done intentionally -- setting the flags is done manually because, according to a comment, python-config passes too many things to the compiler (which is true). Per PR python/20445, this patch changes configure so that -DNDEBUG is only used by release builds. This probably doesn't have very much effect in practice, but I did see that some Python headers use assert, so perhaps it will give some safety. Tested by rebuilding and re-running gdb.python/*.exp on x86-64 Fedora 28. gdb/ChangeLog 2018-09-17 Tom Tromey <tom@tromey.com> PR python/20445: * configure: Rebuild. * configure.ac: Conditionally use -DNDEBUG for Python.
2018-09-17Check for gmp when checking for mpfrTom Tromey1-1/+1
There was a report on irc that the gdb check for mpfr failed when only static libraries are available. The issue is that mpfr depends on gmp, but this is not handled explicitly by gdb. Ideally upstream would switch to pkg-config. Or even more ideally, we would incorporate pkg-config into the compiler and not mess with any of this. Meanwhile, this changes gdb's configure to add gmp to the link line when checking for mpfr. gdb/ChangeLog 2018-09-17 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Use gmp as a library dependency when checking for mpfr.
2018-09-05Make -Wformat-nonliteral work with gccTom Tromey1-1/+10
After looking into why the build failed for Simon but not for me, we found that the underlying cause was due to how gcc treats -Wformat-nonliteral. gcc requires -Wformat to be given first; but warning.m4 was not doing this, so -Wformat-nonliteral was not being used. This patch changes warning.m4 to account gcc's requirement. This then showed that the target-float.c build change in the earlier Makefile patch was also incorrect. Simon didn't see this in his build, but gcc now points it out. So, this patch fixes this problem as well. 2018-09-05 Tom Tromey <tom@tromey.com> * warning.m4 (AM_GDB_WARNINGS): Add -Wformat when testing -Wformat-nonliteral. * target-float.c (host_float_ops<T>::to_string) (host_float_ops<T>::from_string): Use DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL. * configure: Rebuild. gdb/gdbserver/ChangeLog 2018-09-05 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-09-04Remove --enable-multi-iceTom Tromey1-18/+0
gdb's configure script accepts --enable-multi-ice, but the code this refers to is long gone. This patch removes the option entirely. gdb/ChangeLog 2018-09-04 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Remove multi-ice code.
2018-08-27Remove -Wno-narrowing from warnings.m4Tom Tromey1-1/+1
This removes -Wno-narrowing from warnings.m4. This is PR build/23087. gdb/ChangeLog 2018-08-27 Tom Tromey <tom@tromey.com> PR build/23087: * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Remove -Wno-narrowing. gdb/gdbserver/ChangeLog 2018-08-27 Tom Tromey <tom@tromey.com> PR build/23087: * configure: Rebuild.
2018-07-24Remove some unnecessary declarations and configuryTom Tromey1-30/+0
configure checks for declarations of free, malloc, and realloc; but the results are only used in a single spot: utils.c. I think these checks are long since obsolete, so this patch removes them. Grepping the entire tree for these HAVE_DECL_ symbols, the only uses of possible interest to gdb come from bfd/sysdep.h; but this is not (nor should be) included by gdb. (And furthermore I think the code there is probably also obsolete.) gdb/ChangeLog 2018-07-24 Tom Tromey <tom@tromey.com> * utils.c (malloc, realloc, free): Don't declare. * configure, config.in: Rebuild. * configure.ac: Don't check for declarations of free, malloc, or realloc.
2018-07-22Add -Wunused-variable to warnings.m4Tom Tromey1-2/+26
This adds -Wunused-variable to the build. This required a special check in configure in order to work around a bug in GCC 4.9. Simon ound the correct test to use, so I've added him to the ChangeLog. gdb/ChangeLog 2018-07-22 Simon Marchi <simon.marchi@polymtl.ca> Tom Tromey <tom@tromey.com> * warning.m4 (AM_GDB_WARNINGS): Add -Wunused-variable and special test for it. * configure: Rebuild. gdb/gdbserver/ChangeLog 2018-07-22 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-07-17Remove --disable-gdbcliTom Tromey1-28/+0
I think it doesn't really make sense to allow building gdb without the CLI. Perhaps at one time this was a goal, but libgdb is long gone and the CLI is intrinsic to gdb. So, this patch removes the implementation of this configure option. It is still recognized (this is autoconf's default), but does nothing. This simplifies configure.ac and Makefile.in a bit. Tested by rebuilding. gdb/ChangeLog 2018-07-17 Tom Tromey <tom@tromey.com> * configure.ac: Remove --disable-gdbcli. * configure: Rebuild. * Makefile.in (SUBDIR_CLI_DEPS, SUBDIR_CLI_LDFLAGS) (SUBDIR_CLI_CFLAGS): Remove. (SFILES): Use SUBDIR_CLI_SRCS. (COMMON_OBS): Use SUBDIR_CLI_OBS.
2018-06-28Add --enable-codesign to gdb's configureTom Tromey1-0/+11
macOS requires that the gdb executable be signed in order to be able to successfully use ptrace. This must be done after each link. This patch adds a new --enable-codesign configure option so that this step can be automated. gdb/ChangeLog 2018-06-28 Tom Tromey <tom@tromey.com> * NEWS: Mention --enable-codesign. * silent-rules.mk (ECHO_SIGN): New variable. * configure.ac: Add --enable-codesign. * configure: Rebuild. * Makefile.in (CODESIGN, CODESIGN_CERT): New variables. (gdb$(EXEEXT)): Optionally invoke codesign.
2018-06-27Copy gdb-gdb.py to build dirSimon Marchi1-1/+8
I have thought for a long time how nice it would be to have cool pretty printers for GDB's internal types. Well, turns out there are few already in gdb-gdb.py! Unfortunately, if you build GDB outside of the source directory, that file never gets loaded. top-gdb will look for a file called ../path/to/build/gdb/gdb-gdb.py but that file is in the source directory at ../path/to/src/gdb/gdb-gdb.py This patch makes it so we copy it to the build directory, just like we do for gdb-gdb.gdb. With this, I can at least see the file getting automatically loaded: (top-gdb) info pretty-printer global pretty-printers: builtin mpx_bound128 objfile /home/emaisin/build/binutils-gdb/gdb/gdb pretty-printers: type_lookup_function I noticed that running "make" didn't re-generate gdb-gdb.py from gdb-gdb.py.in. That's because it's copied when running the configure script and that's it. I added a rule in the Makefile for that (and for gdb-gdb.gdb too) and added them as a dependency to the "all" target. gdb/ChangeLog: * gdb-gdb.py: Move to... * gdb-gdb.py.in: ... here. * configure.ac (AC_CONFIG_FILES): Add gdb-gdb.py. * Makefile.in (all): Add gdb-gdb.gdb and gdb-gdb.py as dependencies. (distclean): Remove gdb-gdb.py when cleaning. (gdb-gdb.py, gdb-gdb.gdb): New rules. * configure: Re-generate.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-747/+865
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-05-10Fix the clang buildTom Tromey1-1/+1
Simon pointed out that gdb would not build with clang, due to the addition of -Wimplicit-fallthrough. This patch fixes the problem by using -Wimplicit-fallthrough=3 -- this does not work with clang, bypassing the issue. Tested by rebuilding with both gcc and clang; and also by verifying that -Wimplicit-fallthrough=3 is used in the gcc build. I will file a follow-up bug to convert the fall-through comments to a form that can be used by both clang and gcc. gdb/ChangeLog 2018-05-10 Tom Tromey <tom@tromey.com> * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Use -Wimplicit-fallthrough=3. gdb/gdbserver/ChangeLog 2018-05-10 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-05-07Add -Wduplicated-condTom Tromey1-1/+2
This adds -Wduplicated-cond to warnings.m4. This caught one bug. I tried adding -Wduplicated-branches as well, but it results in some spurious failures from code like this in cgen.h: #define CGEN_ATTR_TYPE(n) \ struct { unsigned int bool_; \ CGEN_ATTR_VALUE_TYPE nonbool[(n) ? (n) : 1]; } This will trigger a warning if passed n==1, which seems like a perfectly valid thing to do; and there were other issues like this as well. ChangeLog 2018-05-07 Tom Tromey <tom@tromey.com> * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Add -Wduplicated-cond. gdbserver/ChangeLog 2018-05-07 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-05-04Add -Wimplicit-fallthroughTom Tromey1-1/+2
This adds -Wimplicit-fallthrough to the set of default warnings. 2018-05-04 Tom Tromey <tom@tromey.com> * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Add -Wimplicit-fallthrough. gdbserver/ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-05-04configure uses incorrect link order when testing libpythonPaul Pluzhnikov1-9/+9
References: https://stackoverflow.com/a/49868387 https://sourceware.org/bugzilla/show_bug.cgi?id=11420 Configure uses "gcc -o conftest -g ... conftest.c -ldl -lncurses -lm -ldl ... -lpthread ... -lpython2.7" when deciding whether give libpython is usable. That of course is the wrong link order, and only works for shared libraries (mostly by accident), and only on some systems. gdb/ChangeLog: PR gdb/11420 * configure.ac: Prepend libpython. * python/python-config.py: Likewise. * configure: Regenerate.
2018-04-27Enable -Wsuggest-overrideTom Tromey1-1/+2
I noticed the existence of -Wsuggest-override and so this patch enables it for gdb. It found a few spots that could use "override". Also I went ahead and removed all uses of the "OVERRIDE" macro. Using override is beneficial because it makes it harder to change a base class and then forget to change a derived class. Tested by the buildbot. ChangeLog 2018-04-27 Tom Tromey <tom@tromey.com> * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Add -Wsuggest-override. * dwarf2loc.c (class dwarf_evaluate_loc_desc): Use "override", not "OVERRIDE". (class symbol_needs_eval_context): Likewise. * dwarf2read.c (mock_mapped_index::symbol_name_count) (mock_mapped_index::symbol_name_at): Use "override". Remove "virtual". * dwarf2-frame.c (dwarf_expr_executor::get_addr_index): Use "override". (class dwarf_expr_executor): Use "override", not "OVERRIDE". * aarch64-tdep.c (instruction_reader::read): Use "override". (instruction_reader_test::read): Likewise. * arm-tdep.c (instruction_reader::read): Use "override". (instruction_reader_thumb::read): Likewise. gdbserver/ChangeLog 2018-04-27 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-04-23Regenerate gdb/configure and gdbserver/configureTom Tromey1-12/+12
Pedro pointed out that gdb/configure and gdbserver/configure weren't updated after some recent *.m4 changes. This patch rebuilds those files. Tested by rebuilding. Pedro approved this in the thread where he raised this issue, so I'm pushing it in. ChangeLog 2018-04-23 Tom Tromey <tom@tromey.com> * configure: Rebuild. gdbserver/ChangeLog 2018-04-23 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-04-09Update ax_cv_cxx_compile_cxx.m4Simon Marchi1-11/+17
This file provides the AX_CXX_COMPILE_STDCXX macro. In the context of the following patch, I wanted to build and test GDB in c++17 mode. The version of the macro we have in the repo does not support detecting c++17 compilers, but the upstream version has been updated to do so. Since we have local modifications to the file, I had to reconcile our modifications and the updated upstream version (which was relatively straightforward). gdb/ChangeLog: * ax_cxx_compile_stdcxx.m4: Sync with upstream. * configure: Re-generate.
2018-04-06Add -Wno-error=deprecated-register to gdb build flagsSimon Marchi1-1/+2
As shown in PR 23022, building with clang-6 and Python 2 trips on the fact that the Python 2 headers use the "register" keyword: /usr/include/python2.7/unicodeobject.h:534:5: error: 'register' storage class specifier is deprecated and incompatible with C++17 [-Werror,-Wdeprecated-register] register PyObject *obj, /* Object */ ^~~~~~~~~ This patch adds -Wno-error=deprecated-register to our flags, so that we can still see this class of warnings, but they don't cause a build failure. gdb/ChangeLog: PR gdb/23022 * warning.m4: Add -Wno-error=deprecated-register. * configure: Re-generate.
2018-02-19Add common/ dir in build directoriesAlan Hayward1-1/+1
gdb/ * Makefile.in: (COMMON_SFILES): Add common/*.c files. (SFILES): Remove common/*.c files. (COMMON_OBS): Remove some *.o files built from common/*.c files. * common/common.host: Add common reference. * configure.ac: Likewise. * configure: Regenerate. gdbserver/ * Makefile.in: Add common directory in build. * configure.ac: Add common reference. * configure: Regenerate.
2018-01-30Per-inferior target_terminal state, fix PR gdb/13211, morePedro Alves1-1/+1
In my multi-target branch I ran into problems with GDB's terminal handling that exist in master as well, with multi-inferior debugging. This patch adds a testcase for said problems (gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR gdb/13211 as well (and adds a testcase for that too, gdb.base/interrupt-daemon.exp). The basis of the problem I ran into is the following. Consider a scenario where you have: - inferior 1 - started with "attach", process is running on some other terminal. - inferior 2 - started with "run", process is sharing gdb's terminal. In this scenario, when you stop/resume both inferiors, you want GDB to save/restore the terminal settings of inferior 2, the one that is sharing GDB's terminal. I.e., you want inferior 2 to "own" the terminal (in target_terminal::is_ours/target_terminal::is_inferior sense). Unfortunately, that's not what you get currently. Because GDB doesn't know whether an attached inferior is actually sharing GDB's terminal, it tries to save/restore its settings anyway, ignoring errors. In this case, this is pointless, because inferior 1 is running on a different terminal, but GDB doesn't know better. And then, because it is only possible to have the terminal settings of a single inferior be in effect at a time, or make one inferior/pgrp be the terminal's foreground pgrp (aka, only one inferior can "own" the terminal, ignoring fork children here), if GDB happens to try to restore the terminal settings of inferior 1 first, then GDB never restores the terminal settings of inferior 2. This patch fixes that and a few things more along the way: - Moves enum target_terminal::terminal_state out of the target_terminal class (it's currently private) and makes it a scoped enum so that it can be easily used elsewhere. - Replaces the inflow.c:terminal_is_ours boolean with a target_terminal_state variable. This allows distinguishing is_ours and is_ours_for_output states. This allows finally making child_terminal_ours_1 do something with its "output_only" parameter. - Makes each inferior have its own copy of the is_ours/is_ours_for_output/is_inferior state. - Adds a way for GDB to tell whether the inferior is sharing GDB's terminal. Works best on Linux and Solaris; the fallback works just as well as currently. - With that, we can remove the inf->attach_flag tests from child_terminal_inferior/child_terminal_ours. - Currently target_ops.to_ours is responsible for both saving the current inferior's terminal state, and restoring gdb's state. Because each inferior has its own terminal state (possibly handled by different targets in a multi-target world, even), we need to split the inferior-saving part from the gdb-restoring part. The patch adds a new target_ops.to_save_inferior target method for that. - Adds a new target_terminal::save_inferior() function, so that sequences like: scoped_restore_terminal_state save_state; target_terminal::ours_for_output (); ... restore back inferiors that were target_terminal_state::is_inferior before back to is_inferior, and leaves inferiors that were is_ours alone. - Along the way, this adds a default implementation of target_pass_ctrlc to inflow.c (for inf-child.c), that handles passing the Ctrl-C to a process running on GDB's terminal or to some other process otherwise. - Similarly, adds a new target default implementation of target_interrupt, for the "interrupt" command. The current implementation of this hook in inf-ptrace.c kills the whole process group, but that's incorrect/undesirable because we may not be attached to all processes in the process group. And also, it's incorrect because inferior_process_group() doesn't really return the inferior's real process group id if the inferior is not a process group leader... This is the cause of PR gdb/13211 [1], which this patch fixes. While at it, that target method's "ptid" parameter is eliminated, because it's not really used. - A new test is included that exercises and fixes PR gdb/13211, and also fixes a GDB issue reported on stackoverflow that I ran into while working on this [2]. The problem is similar to PR gdb/13211, except that it also triggers with Ctrl-C. When debugging a daemon (i.e., a process that disconnects from the controlling terminal and is not a process group leader, then Ctrl-C doesn't work, you just can't interrupt the inferior at all, resulting in a hung debug session. The problem is that since the inferior is no longer associated with gdb's session / controlling terminal, then trying to put the inferior in the foreground fails. And so Ctrl-C never reaches the inferior directly. pass_signal is only used when the inferior is attached, but that is not the case here. This is fixed by the new child_pass_ctrlc. Without the fix, the new interrupt-daemon.exp testcase fails with timeout waiting for a SIGINT that never arrives. [1] PR gdb/13211 - Async / Process group and interrupt not working https://sourceware.org/bugzilla/show_bug.cgi?id=13211 [2] GDB not reacting Ctrl-C when after fork() and setsid() https://stackoverflow.com/questions/46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid Note this patch does _not_ fix: - PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use https://sourceware.org/bugzilla/show_bug.cgi?id=14559 - PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb. https://sourceware.org/bugzilla/show_bug.cgi?id=9425 The only way to fix that that I know of (without changing the kernel) is to make GDB put inferiors in a separate session (create a pseudo-tty master/slave pair, make the inferior run with the slave as its terminal, and have gdb pump output/input on the master end). gdb/ChangeLog: 2018-01-30 Pedro Alves <palves@redhat.com> PR gdb/13211 * config.in, configure: Regenerate. * configure.ac: Check for getpgid. * go32-nat.c (go32_pass_ctrlc): New. (go32_target): Install it. * inf-child.c (inf_child_target): Install child_terminal_save_inferior, child_pass_ctrlc and child_interrupt. * inf-ptrace.c (inf_ptrace_interrupt): Delete. (inf_ptrace_target): No longer install it. * infcmd.c (interrupt_target_1): Adjust. * inferior.h (child_terminal_save_inferior, child_pass_ctrlc) (child_interrupt): Declare. (inferior::terminal_state): New. * inflow.c (struct terminal_info): Update comments. (inferior_process_group): Delete. (terminal_is_ours): Delete. (gdb_tty_state): New. (child_terminal_init): Adjust. (is_gdb_terminal, sharing_input_terminal_1) (sharing_input_terminal): New functions. (child_terminal_inferior): Adjust. Use sharing_input_terminal. Set the process's actual process group in the foreground if possible. Handle is_ours_for_output/is_ours distinction. Don't mark terminal as the inferior's if not sharing GDB's terminal. Don't check attach_flag. (child_terminal_ours_for_output, child_terminal_ours): Adjust to pass down a target_terminal_state. (child_terminal_save_inferior): New, factored out from ... (child_terminal_ours_1): ... this. Handle target_terminal_state::is_ours_for_output. (child_interrupt, child_pass_ctrlc): New. (inflow_inferior_exit): Clear the inferior's terminal_state. (copy_terminal_info): Copy the inferior's terminal state. (_initialize_inflow): Remove reference to terminal_is_ours. * inflow.h (inferior_process_group): Delete. * nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust. * procfs.c (procfs_target): Don't install procfs_interrupt. (procfs_interrupt): Delete. * remote.c (remote_serial_quit_handler): Adjust. (remote_interrupt): Remove ptid parameter. Adjust. * target-delegates.c: Regenerate. * target.c: Include "terminal.h". (target_terminal::terminal_state): Rename to ... (target_terminal::m_terminal_state): ... this. (target_terminal::init): Adjust. (target_terminal::inferior): Adjust to per-inferior terminal_state. (target_terminal::restore_inferior, target_terminal_is_ours_kind): New. (target_terminal::ours, target_terminal::ours_for_output): Use target_terminal_is_ours_kind. (target_interrupt): Remove ptid parameter. Adjust. (default_target_pass_ctrlc): Adjust. * target.h (target_ops::to_terminal_save_inferior): New field. (target_ops::to_interrupt): Remove ptid_t parameter. (target_interrupt): Remove ptid_t parameter. Update comment. (target_pass_ctrlc): Update comment. * target/target.h (target_terminal_state): New scoped enum, factored out of ... (target_terminal::terminal_state): ... here. (target_terminal::inferior): Update comments. (target_terminal::restore_inferior): New. (target_terminal::is_inferior, target_terminal::is_ours) (target_terminal::is_ours_for_output): Adjust. (target_terminal::scoped_restore_terminal_state): Adjust to rename, and call restore_inferior() instead of inferior(). (target_terminal::scoped_restore_terminal_state::m_state): Change type. (target_terminal::terminal_state): Rename to ... (target_terminal::m_terminal_state): ... this and change type. gdb/gdbserver/ChangeLog: 2018-01-30 Pedro Alves <palves@redhat.com> PR gdb/13211 * target.c (target_terminal::terminal_state): Rename to ... (target_terminal::m_terminal_state): ... this. gdb/testsuite/ChangeLog: 2018-01-30 Pedro Alves <palves@redhat.com> PR gdb/13211 * gdb.base/interrupt-daemon.c: New. * gdb.base/interrupt-daemon.exp: New. * gdb.multi/multi-term-settings.c: New. * gdb.multi/multi-term-settings.exp: New.
2018-01-17configure: Fix test for fs_base/gs_base in <sys/user.h>Eldar Abusalimov1-2/+4
Make <sys/types.h> be included prior to including <sys/user.h>. glibc versions older than 2.14 use __uintNN_t types within certain structures defined in <sys/user.h> probably assuming these types are defined prior to including the header. This results in the following `configure` feature test compilation error that makes it think that `struct user_regs_struct` doesn't have `fs_base`/`gs_base` fields, althouh it does. configure:13617: checking for struct user_regs_struct.fs_base configure:13617: gcc -c -g -O2 -I/linux/include conftest.c >&5 In file included from conftest.c:158:0: /usr/include/sys/user.h:32:3: error: unknown type name '__uint16_t' __uint16_t cwd; ^ /usr/include/sys/user.h:33:3: error: unknown type name '__uint16_t' __uint16_t swd; ^ /usr/include/sys/user.h:34:3: error: unknown type name '__uint16_t' __uint16_t ftw; ^ /usr/include/sys/user.h:35:3: error: unknown type name '__uint16_t' __uint16_t fop; ^ /usr/include/sys/user.h:36:3: error: unknown type name '__uint64_t' __uint64_t rip; ^ /usr/include/sys/user.h:37:3: error: unknown type name '__uint64_t' __uint64_t rdp; ^ /usr/include/sys/user.h:38:3: error: unknown type name '__uint32_t' __uint32_t mxcsr; ^ /usr/include/sys/user.h:39:3: error: unknown type name '__uint32_t' __uint32_t mxcr_mask; ^ /usr/include/sys/user.h:40:3: error: unknown type name '__uint32_t' __uint32_t st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */ ^ /usr/include/sys/user.h:41:3: error: unknown type name '__uint32_t' __uint32_t xmm_space[64]; /* 16*16 bytes for each XMM-reg = 256 bytes */ ^ /usr/include/sys/user.h:42:3: error: unknown type name '__uint32_t' __uint32_t padding[24]; ^ configure:13617: $? = 1 configure: failed program was: | /* confdefs.h */ ... | /* end confdefs.h. */ | #include <sys/user.h> | | int | main () | { | static struct user_regs_struct ac_aggr; | if (ac_aggr.fs_base) | return 0; | ; | return 0; | } Recent glibc versions don't use typedef'ed int types in <sys/user.h>, thus allowing it to be included as is (glibc commit d79a9c949c84e7f0ba33e87447c47af833e9f11a). However there're still some distros alive that use older glibc, for instance, RHEL/CentOS 6 package glibc 2.12. Also affects PR gdb/21559: ../../gdb/regcache.c:1087: internal-error: void regcache_raw_supply(regcache, int, const void): Assertion `regnum >= 0 && regnum < regcache->descr->nr_raw_registers' failed. As noted by Andrew Paprocki, who submitted the PR (https://sourceware.org/bugzilla/show_bug.cgi?id=21559#c3): > It should be noted that modifying `configure` to force on > `HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE` and > `HAVE_STRUCT_USER_REGS_STRUCT_GS_BASE` fixes this issue. For some > reason the `configure` tests for `fs_base` and `gs_base` fail > even though `sys/user.h` on RHEL5 has the fields defined in > `user_regs_struct`. Note that this patch does NOT fix the root cause of PR gdb/21559, although now that `configure` properly detects the presence of the fields and sets HAVE_XXX accordingly, the execution takes another path, which doesn't lead to the assertion failure in question. gdb/ChangeLog: 2018-01-17 Eldar Abusalimov <eldar.abusalimov@jetbrains.com> PR gdb/21559 * configure.ac: Include <sys/types.h> prior to <sys/user.h> when checking for fs_base/gs_base fields in struct user_regs_struct. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2018-01-17 Eldar Abusalimov <eldar.abusalimov@jetbrains.com> PR gdb/21559 * configure.ac: Include <sys/types.h> prior to <sys/user.h> when checking for fs_base/gs_base fields in struct user_regs_struct. * configure: Regenerate.
2018-01-09Support 'info proc' for native FreeBSD processes.John Baldwin1-0/+60
- Command line arguments are fetched via the kern.proc.args.<pid> sysctl. - The 'cwd' and 'exe' values are obtained from the per-process file descriptor table returned by kinfo_getfile() from libutil. - 'mappings' is implemented by walking the array of VM map entries returned by kinfo_getvmmap() from libutil. - 'status' output is generated by outputting fields from the structure returned by the kern.proc.pid.<pid> sysctl. - 'stat' is aliased to 'status'. gdb/ChangeLog: * configure.ac: Check for kinfo_getfile in libutil. * configure: Regenerate. * config.in: Regenerate. * fbsd-nat.c: Include "fbsd-tdep.h". (fbsd_fetch_cmdline): New. (fbsd_fetch_kinfo_proc): Move earlier and change to return a bool rather than calling error. (fbsd_info_proc): New. (fbsd_thread_name): Report error if fbsd_fetch_kinfo_proc fails. (fbsd_wait): Report warning if fbsd_fetch_kinfo_proc fails. (fbsd_nat_add_target): Set "to_info_proc" to "fbsd_info_proc".
2018-01-08Fix GDB build failure when $development is falseYao Qi1-2/+2
We don't build GDB selftests bits when $development is false. However, if we turn bfd/development.sh:$development to false, common/selftest.c is compiled which is not expected. It causes the build failure, selftest.o: In function `selftests::run_tests(char const*)': binutils-gdb/gdb/common/selftest.c:97: undefined reference to `selftests::reset()' collect2: error: ld returned 1 exit status I fix this issue by putting selftest.o selftest-arch.o into CONFIG_OBS only when $development is true. After this is fixed, there are other build failures in maint.c, this patch fixes them as well. In the release mode, the output of these commands are: (gdb) maintenance selftest Selftests are not available in a non-development build. (gdb) maintenance selftest foo Selftests are not available in a non-development build. (gdb) maintenance info selftests Selftests are not available in a non-development build. gdb: 2018-01-08 Yao Qi <yao.qi@linaro.org> Simon Marchi <simon.marchi@ericsson.com> * Makefile.in (COMMON_SFILES): Remove selftest-arch.c and common/selftest.c. (COMMON_OBS): Remove selftest.o. * configure.ac: Append selftest-arch.c and common/selftest.c to CONFIG_SRCS. Append selftest-arch.o and selftest.o to COMMON_OBS. * configure: Re-generated. * maint.c (maintenance_selftest): Wrap selftests::run_tests with GDB_SELF_TEST. (maintenance_info_selftests): Likewise. gdb/testsuite: 2018-01-08 Simon Marchi <simon.marchi@ericsson.com> * gdb.gdb/unittest.exp: Match output in non-development mode.
2017-11-30Remove ioctl-based procfs support on SolarisRainer Orth1-185/+2
This is the previously mentioned patch to get rid of unstructured/ioctl-based procfs support in procfs.c. Given that support for structured procfs was introduced in Solaris 2.6 back in 1997 and we're just removing support for Solaris < 10, there's no point in carrying that baggage (and tons of support for IRIX and OSF/1 as well) around any longer. Most of the patch should be straightforward (removing support for !NEW_PROC_API, non-Solaris OSes and pre-Solaris 10 quirks). Only a few points need explanations: * <sys/syscall.h> was already included unconditionally in most places, so there's no need to have guards in a few remaining ones. * configure.host already obsoletes i?86-*-sysv4.2, i?86-*-sysv5, so NEW_PROC_API detection for those in configure.ac can go. * I'm still including <sys/procfs.h> with #define _STRUCTURED_PROC 1. Theoretically, it would be better to include <procfs.h> on Solaris (which includes that define), but that breaks the build over <procfs.h> vs. gdb's "procfs.h", and doesn't exist on Linux. * I've regenerated syscall_table[] in proc-events.c with a small script from Solaris 10, 11.3, 11.4 <sys/syscall.h>, so there should be no traces of older Solaris versions and other OSes left. * prsysent_t and DYNAMIC_SYSCALLS was only used for AIX 5, but AIX doesn't use procfs.c any longer, so all related code can go. The patch was generated with diff -w so one can easier see changes without being distracted by simple reindentations. So far, it has only been compiled and smoke-tested on amd64-pc-solaris2.1[01], sparcv9-sun-solaris2.1[01], and x86_64-pc-linux-gnu. Certainly needs more testing (Solaris 11.3 vs. 11.4, 32-bit gdb, testsuite once I've figured out what's wrong on Solaris 10 etc.), but it's enough to get a first impression how much cleanup is possible here. * configure.ac Don't check for sys/fault.h, sys/syscall.h, sys/proc.h. (NEW_PROC_API): Remove. (prsysent_t, pr_sigset_t, pr_sigaction64_t, pr_siginfo64_t): Likewise. * common/common.m4 (GDB_AC_COMMON): Don't check for sys/syscall.h. * configure: Regenerate. * config.in: Regenerate. * gdbserver/configure: Regenerate. * gdbserver/config.in: Regenerate. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Remove NEW_PROC_API test. * sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Likewise. * linux-btrace.c: Remove HAVE_SYS_SYSCALL_H test. * proc-api.c: Remove !NEW_PROC_API support. Remove HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests. Remove tests for macros always defined on Solaris. * proc-events.c: Remove !NEW_PROC_API support. Remove Remove HAVE_SYS_SYSCALL_H, HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests. (init_syscall_table): Remove non-Solaris syscalls. Remove tests for syscalls present on all Solaris versions. Add missing Solaris 10+ syscalls. (signal_table): Remove non-Solaris signals. Remove tests for signals present on all Solaris versions. (fault_table): Remove non-Solaris faults. Remove tests for faults present on all Solaris versions. * proc-flags.c: Remove !NEW_PROC_API support. (pr_flag_table): Remove non-Solaris and pre-Solaris 7 comments. Remove non-Solaris flags. * proc-why.c: Remove !NEW_PROC_API support. (pr_why_table): Remove meaningless comments. Remove tests for reasons present on all Solaris versions. Remove OSF/1 cases. (proc_prettyfprint_why): Likewise. * procfs.c: Remove !NEW_PROC_API and DYNAMIC_SYSCALLS support. Remove HAVE_SYS_FAULT_H and HAVE_SYS_SYSCALL_H tests. Remove WA_READ test, IRIX watchpoint support. (gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t): Replace by base types. Change users. (gdb_praddset, gdb_prdelset, gdb_premptysysset, gdb_praddsysset) (gdb_prdelset, gdb_pr_issyssetmember): Replace by base macros. Change callers. Remove CTL_PROC_NAME_FMT tests. (gdb_prstatus_t, gdb_lwpstatus_t): Replace by base types. Change users. (sysset_t_size): Remove. Use sizeof (sysset_t) in callers. Remove PROCFS_DONT_PIOCSSIG_CURSIG support. (proc_modify_flag): Replace GDBRESET by PCUNSET. Remove PR_ASYNC, PR_KLC tests. (proc_unset_inherit_on_fork): Remove PR_ASYNC test. (proc_parent_pid): Remove PCWATCH etc. tests. (proc_set_watchpoint): Remove !PCWATCH && !PIOCSWATCH support. Remove PCAGENT test. (proc_get_nthreads) [PIOCNTHR && PIOCTLIST]: Remove. Remove SYS_lwpcreate || SYS_lwp_create test. (proc_get_current_thread): Likewise. [PIOCNTHR && PIOCTLIST]: Remove. [PIOCLSTATUS]: Remove. (procfs_debug_inferior): Remove non-Solaris cases, conditionals. [PRFS_STOPEXEC]: Remove. (syscall_is_lwp_exit): Remove non-Solaris cases, conditionals. (syscall_is_exit): Likewise. (syscall_is_exec): Likewise. (syscall_is_lwp_create): Likewise. Remove SYS_syssgi support. (procfs_wait): Remove PR_ASYNC, !PIOCSSPCACT tests. [SYS_syssgi]: Remove. Remove non-Solaris cases, conditionals. (unconditionally_kill_inferior) [PROCFS_NEED_PIOCSSIG_FOR_KILL]: Remove. (procfs_init_inferior) [SYS_syssgi]: Remove. (procfs_set_exec_trap) [PRFS_STOPEXEC]: Remove. (procfs_inferior_created) [SYS_syssgi]: Remove. (procfs_set_watchpoint): Remove !AIX5 test. (procfs_stopped_by_watchpoint): Remove FLTWATCH test, FLTKWATCH case. (mappingflags) [MA_PHYS]: Remove. (info_mappings_callback): Remove PCAGENT test. Remove PIOCOPENLWP || PCAGENT test.
2017-11-27Move python object files to python subdirectoryTom Tromey1-1/+1
Move the object files corresponding to python/*.c to the python subdirectory in the build tree. Because special CFLAGS are passed just to Python compilations, this patch also required the addition of a pattern rule to update INTERNAL_CFLAGS for here. ChangeLog 2017-11-27 Tom Tromey <tom@tromey.com> * Makefile.in (SUBDIR_PYTHON_OBS): Redefine. (CONFIG_SRC_SUBDIR): Add python. (%.o): Remove python rule. (python/%.o): New rule. * configure: Rebuild. * configure.ac (CONFIG_OBS): Refer to python/python.o
generated by cgit v1.1 at 2024-12-18 13:46:11 +0000