aboutsummaryrefslogtreecommitdiff
path: root/gdb/configure
AgeCommit message (Collapse)AuthorFilesLines
2018-05-04Add -Wimplicit-fallthroughTom Tromey1-1/+2
This adds -Wimplicit-fallthrough to the set of default warnings. 2018-05-04 Tom Tromey <tom@tromey.com> * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Add -Wimplicit-fallthrough. gdbserver/ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-05-04configure uses incorrect link order when testing libpythonPaul Pluzhnikov1-9/+9
References: https://stackoverflow.com/a/49868387 https://sourceware.org/bugzilla/show_bug.cgi?id=11420 Configure uses "gcc -o conftest -g ... conftest.c -ldl -lncurses -lm -ldl ... -lpthread ... -lpython2.7" when deciding whether give libpython is usable. That of course is the wrong link order, and only works for shared libraries (mostly by accident), and only on some systems. gdb/ChangeLog: PR gdb/11420 * configure.ac: Prepend libpython. * python/python-config.py: Likewise. * configure: Regenerate.
2018-04-27Enable -Wsuggest-overrideTom Tromey1-1/+2
I noticed the existence of -Wsuggest-override and so this patch enables it for gdb. It found a few spots that could use "override". Also I went ahead and removed all uses of the "OVERRIDE" macro. Using override is beneficial because it makes it harder to change a base class and then forget to change a derived class. Tested by the buildbot. ChangeLog 2018-04-27 Tom Tromey <tom@tromey.com> * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Add -Wsuggest-override. * dwarf2loc.c (class dwarf_evaluate_loc_desc): Use "override", not "OVERRIDE". (class symbol_needs_eval_context): Likewise. * dwarf2read.c (mock_mapped_index::symbol_name_count) (mock_mapped_index::symbol_name_at): Use "override". Remove "virtual". * dwarf2-frame.c (dwarf_expr_executor::get_addr_index): Use "override". (class dwarf_expr_executor): Use "override", not "OVERRIDE". * aarch64-tdep.c (instruction_reader::read): Use "override". (instruction_reader_test::read): Likewise. * arm-tdep.c (instruction_reader::read): Use "override". (instruction_reader_thumb::read): Likewise. gdbserver/ChangeLog 2018-04-27 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-04-23Regenerate gdb/configure and gdbserver/configureTom Tromey1-12/+12
Pedro pointed out that gdb/configure and gdbserver/configure weren't updated after some recent *.m4 changes. This patch rebuilds those files. Tested by rebuilding. Pedro approved this in the thread where he raised this issue, so I'm pushing it in. ChangeLog 2018-04-23 Tom Tromey <tom@tromey.com> * configure: Rebuild. gdbserver/ChangeLog 2018-04-23 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2018-04-09Update ax_cv_cxx_compile_cxx.m4Simon Marchi1-11/+17
This file provides the AX_CXX_COMPILE_STDCXX macro. In the context of the following patch, I wanted to build and test GDB in c++17 mode. The version of the macro we have in the repo does not support detecting c++17 compilers, but the upstream version has been updated to do so. Since we have local modifications to the file, I had to reconcile our modifications and the updated upstream version (which was relatively straightforward). gdb/ChangeLog: * ax_cxx_compile_stdcxx.m4: Sync with upstream. * configure: Re-generate.
2018-04-06Add -Wno-error=deprecated-register to gdb build flagsSimon Marchi1-1/+2
As shown in PR 23022, building with clang-6 and Python 2 trips on the fact that the Python 2 headers use the "register" keyword: /usr/include/python2.7/unicodeobject.h:534:5: error: 'register' storage class specifier is deprecated and incompatible with C++17 [-Werror,-Wdeprecated-register] register PyObject *obj, /* Object */ ^~~~~~~~~ This patch adds -Wno-error=deprecated-register to our flags, so that we can still see this class of warnings, but they don't cause a build failure. gdb/ChangeLog: PR gdb/23022 * warning.m4: Add -Wno-error=deprecated-register. * configure: Re-generate.
2018-02-19Add common/ dir in build directoriesAlan Hayward1-1/+1
gdb/ * Makefile.in: (COMMON_SFILES): Add common/*.c files. (SFILES): Remove common/*.c files. (COMMON_OBS): Remove some *.o files built from common/*.c files. * common/common.host: Add common reference. * configure.ac: Likewise. * configure: Regenerate. gdbserver/ * Makefile.in: Add common directory in build. * configure.ac: Add common reference. * configure: Regenerate.
2018-01-30Per-inferior target_terminal state, fix PR gdb/13211, morePedro Alves1-1/+1
In my multi-target branch I ran into problems with GDB's terminal handling that exist in master as well, with multi-inferior debugging. This patch adds a testcase for said problems (gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR gdb/13211 as well (and adds a testcase for that too, gdb.base/interrupt-daemon.exp). The basis of the problem I ran into is the following. Consider a scenario where you have: - inferior 1 - started with "attach", process is running on some other terminal. - inferior 2 - started with "run", process is sharing gdb's terminal. In this scenario, when you stop/resume both inferiors, you want GDB to save/restore the terminal settings of inferior 2, the one that is sharing GDB's terminal. I.e., you want inferior 2 to "own" the terminal (in target_terminal::is_ours/target_terminal::is_inferior sense). Unfortunately, that's not what you get currently. Because GDB doesn't know whether an attached inferior is actually sharing GDB's terminal, it tries to save/restore its settings anyway, ignoring errors. In this case, this is pointless, because inferior 1 is running on a different terminal, but GDB doesn't know better. And then, because it is only possible to have the terminal settings of a single inferior be in effect at a time, or make one inferior/pgrp be the terminal's foreground pgrp (aka, only one inferior can "own" the terminal, ignoring fork children here), if GDB happens to try to restore the terminal settings of inferior 1 first, then GDB never restores the terminal settings of inferior 2. This patch fixes that and a few things more along the way: - Moves enum target_terminal::terminal_state out of the target_terminal class (it's currently private) and makes it a scoped enum so that it can be easily used elsewhere. - Replaces the inflow.c:terminal_is_ours boolean with a target_terminal_state variable. This allows distinguishing is_ours and is_ours_for_output states. This allows finally making child_terminal_ours_1 do something with its "output_only" parameter. - Makes each inferior have its own copy of the is_ours/is_ours_for_output/is_inferior state. - Adds a way for GDB to tell whether the inferior is sharing GDB's terminal. Works best on Linux and Solaris; the fallback works just as well as currently. - With that, we can remove the inf->attach_flag tests from child_terminal_inferior/child_terminal_ours. - Currently target_ops.to_ours is responsible for both saving the current inferior's terminal state, and restoring gdb's state. Because each inferior has its own terminal state (possibly handled by different targets in a multi-target world, even), we need to split the inferior-saving part from the gdb-restoring part. The patch adds a new target_ops.to_save_inferior target method for that. - Adds a new target_terminal::save_inferior() function, so that sequences like: scoped_restore_terminal_state save_state; target_terminal::ours_for_output (); ... restore back inferiors that were target_terminal_state::is_inferior before back to is_inferior, and leaves inferiors that were is_ours alone. - Along the way, this adds a default implementation of target_pass_ctrlc to inflow.c (for inf-child.c), that handles passing the Ctrl-C to a process running on GDB's terminal or to some other process otherwise. - Similarly, adds a new target default implementation of target_interrupt, for the "interrupt" command. The current implementation of this hook in inf-ptrace.c kills the whole process group, but that's incorrect/undesirable because we may not be attached to all processes in the process group. And also, it's incorrect because inferior_process_group() doesn't really return the inferior's real process group id if the inferior is not a process group leader... This is the cause of PR gdb/13211 [1], which this patch fixes. While at it, that target method's "ptid" parameter is eliminated, because it's not really used. - A new test is included that exercises and fixes PR gdb/13211, and also fixes a GDB issue reported on stackoverflow that I ran into while working on this [2]. The problem is similar to PR gdb/13211, except that it also triggers with Ctrl-C. When debugging a daemon (i.e., a process that disconnects from the controlling terminal and is not a process group leader, then Ctrl-C doesn't work, you just can't interrupt the inferior at all, resulting in a hung debug session. The problem is that since the inferior is no longer associated with gdb's session / controlling terminal, then trying to put the inferior in the foreground fails. And so Ctrl-C never reaches the inferior directly. pass_signal is only used when the inferior is attached, but that is not the case here. This is fixed by the new child_pass_ctrlc. Without the fix, the new interrupt-daemon.exp testcase fails with timeout waiting for a SIGINT that never arrives. [1] PR gdb/13211 - Async / Process group and interrupt not working https://sourceware.org/bugzilla/show_bug.cgi?id=13211 [2] GDB not reacting Ctrl-C when after fork() and setsid() https://stackoverflow.com/questions/46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid Note this patch does _not_ fix: - PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use https://sourceware.org/bugzilla/show_bug.cgi?id=14559 - PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb. https://sourceware.org/bugzilla/show_bug.cgi?id=9425 The only way to fix that that I know of (without changing the kernel) is to make GDB put inferiors in a separate session (create a pseudo-tty master/slave pair, make the inferior run with the slave as its terminal, and have gdb pump output/input on the master end). gdb/ChangeLog: 2018-01-30 Pedro Alves <palves@redhat.com> PR gdb/13211 * config.in, configure: Regenerate. * configure.ac: Check for getpgid. * go32-nat.c (go32_pass_ctrlc): New. (go32_target): Install it. * inf-child.c (inf_child_target): Install child_terminal_save_inferior, child_pass_ctrlc and child_interrupt. * inf-ptrace.c (inf_ptrace_interrupt): Delete. (inf_ptrace_target): No longer install it. * infcmd.c (interrupt_target_1): Adjust. * inferior.h (child_terminal_save_inferior, child_pass_ctrlc) (child_interrupt): Declare. (inferior::terminal_state): New. * inflow.c (struct terminal_info): Update comments. (inferior_process_group): Delete. (terminal_is_ours): Delete. (gdb_tty_state): New. (child_terminal_init): Adjust. (is_gdb_terminal, sharing_input_terminal_1) (sharing_input_terminal): New functions. (child_terminal_inferior): Adjust. Use sharing_input_terminal. Set the process's actual process group in the foreground if possible. Handle is_ours_for_output/is_ours distinction. Don't mark terminal as the inferior's if not sharing GDB's terminal. Don't check attach_flag. (child_terminal_ours_for_output, child_terminal_ours): Adjust to pass down a target_terminal_state. (child_terminal_save_inferior): New, factored out from ... (child_terminal_ours_1): ... this. Handle target_terminal_state::is_ours_for_output. (child_interrupt, child_pass_ctrlc): New. (inflow_inferior_exit): Clear the inferior's terminal_state. (copy_terminal_info): Copy the inferior's terminal state. (_initialize_inflow): Remove reference to terminal_is_ours. * inflow.h (inferior_process_group): Delete. * nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust. * procfs.c (procfs_target): Don't install procfs_interrupt. (procfs_interrupt): Delete. * remote.c (remote_serial_quit_handler): Adjust. (remote_interrupt): Remove ptid parameter. Adjust. * target-delegates.c: Regenerate. * target.c: Include "terminal.h". (target_terminal::terminal_state): Rename to ... (target_terminal::m_terminal_state): ... this. (target_terminal::init): Adjust. (target_terminal::inferior): Adjust to per-inferior terminal_state. (target_terminal::restore_inferior, target_terminal_is_ours_kind): New. (target_terminal::ours, target_terminal::ours_for_output): Use target_terminal_is_ours_kind. (target_interrupt): Remove ptid parameter. Adjust. (default_target_pass_ctrlc): Adjust. * target.h (target_ops::to_terminal_save_inferior): New field. (target_ops::to_interrupt): Remove ptid_t parameter. (target_interrupt): Remove ptid_t parameter. Update comment. (target_pass_ctrlc): Update comment. * target/target.h (target_terminal_state): New scoped enum, factored out of ... (target_terminal::terminal_state): ... here. (target_terminal::inferior): Update comments. (target_terminal::restore_inferior): New. (target_terminal::is_inferior, target_terminal::is_ours) (target_terminal::is_ours_for_output): Adjust. (target_terminal::scoped_restore_terminal_state): Adjust to rename, and call restore_inferior() instead of inferior(). (target_terminal::scoped_restore_terminal_state::m_state): Change type. (target_terminal::terminal_state): Rename to ... (target_terminal::m_terminal_state): ... this and change type. gdb/gdbserver/ChangeLog: 2018-01-30 Pedro Alves <palves@redhat.com> PR gdb/13211 * target.c (target_terminal::terminal_state): Rename to ... (target_terminal::m_terminal_state): ... this. gdb/testsuite/ChangeLog: 2018-01-30 Pedro Alves <palves@redhat.com> PR gdb/13211 * gdb.base/interrupt-daemon.c: New. * gdb.base/interrupt-daemon.exp: New. * gdb.multi/multi-term-settings.c: New. * gdb.multi/multi-term-settings.exp: New.
2018-01-17configure: Fix test for fs_base/gs_base in <sys/user.h>Eldar Abusalimov1-2/+4
Make <sys/types.h> be included prior to including <sys/user.h>. glibc versions older than 2.14 use __uintNN_t types within certain structures defined in <sys/user.h> probably assuming these types are defined prior to including the header. This results in the following `configure` feature test compilation error that makes it think that `struct user_regs_struct` doesn't have `fs_base`/`gs_base` fields, althouh it does. configure:13617: checking for struct user_regs_struct.fs_base configure:13617: gcc -c -g -O2 -I/linux/include conftest.c >&5 In file included from conftest.c:158:0: /usr/include/sys/user.h:32:3: error: unknown type name '__uint16_t' __uint16_t cwd; ^ /usr/include/sys/user.h:33:3: error: unknown type name '__uint16_t' __uint16_t swd; ^ /usr/include/sys/user.h:34:3: error: unknown type name '__uint16_t' __uint16_t ftw; ^ /usr/include/sys/user.h:35:3: error: unknown type name '__uint16_t' __uint16_t fop; ^ /usr/include/sys/user.h:36:3: error: unknown type name '__uint64_t' __uint64_t rip; ^ /usr/include/sys/user.h:37:3: error: unknown type name '__uint64_t' __uint64_t rdp; ^ /usr/include/sys/user.h:38:3: error: unknown type name '__uint32_t' __uint32_t mxcsr; ^ /usr/include/sys/user.h:39:3: error: unknown type name '__uint32_t' __uint32_t mxcr_mask; ^ /usr/include/sys/user.h:40:3: error: unknown type name '__uint32_t' __uint32_t st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */ ^ /usr/include/sys/user.h:41:3: error: unknown type name '__uint32_t' __uint32_t xmm_space[64]; /* 16*16 bytes for each XMM-reg = 256 bytes */ ^ /usr/include/sys/user.h:42:3: error: unknown type name '__uint32_t' __uint32_t padding[24]; ^ configure:13617: $? = 1 configure: failed program was: | /* confdefs.h */ ... | /* end confdefs.h. */ | #include <sys/user.h> | | int | main () | { | static struct user_regs_struct ac_aggr; | if (ac_aggr.fs_base) | return 0; | ; | return 0; | } Recent glibc versions don't use typedef'ed int types in <sys/user.h>, thus allowing it to be included as is (glibc commit d79a9c949c84e7f0ba33e87447c47af833e9f11a). However there're still some distros alive that use older glibc, for instance, RHEL/CentOS 6 package glibc 2.12. Also affects PR gdb/21559: ../../gdb/regcache.c:1087: internal-error: void regcache_raw_supply(regcache, int, const void): Assertion `regnum >= 0 && regnum < regcache->descr->nr_raw_registers' failed. As noted by Andrew Paprocki, who submitted the PR (https://sourceware.org/bugzilla/show_bug.cgi?id=21559#c3): > It should be noted that modifying `configure` to force on > `HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE` and > `HAVE_STRUCT_USER_REGS_STRUCT_GS_BASE` fixes this issue. For some > reason the `configure` tests for `fs_base` and `gs_base` fail > even though `sys/user.h` on RHEL5 has the fields defined in > `user_regs_struct`. Note that this patch does NOT fix the root cause of PR gdb/21559, although now that `configure` properly detects the presence of the fields and sets HAVE_XXX accordingly, the execution takes another path, which doesn't lead to the assertion failure in question. gdb/ChangeLog: 2018-01-17 Eldar Abusalimov <eldar.abusalimov@jetbrains.com> PR gdb/21559 * configure.ac: Include <sys/types.h> prior to <sys/user.h> when checking for fs_base/gs_base fields in struct user_regs_struct. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2018-01-17 Eldar Abusalimov <eldar.abusalimov@jetbrains.com> PR gdb/21559 * configure.ac: Include <sys/types.h> prior to <sys/user.h> when checking for fs_base/gs_base fields in struct user_regs_struct. * configure: Regenerate.
2018-01-09Support 'info proc' for native FreeBSD processes.John Baldwin1-0/+60
- Command line arguments are fetched via the kern.proc.args.<pid> sysctl. - The 'cwd' and 'exe' values are obtained from the per-process file descriptor table returned by kinfo_getfile() from libutil. - 'mappings' is implemented by walking the array of VM map entries returned by kinfo_getvmmap() from libutil. - 'status' output is generated by outputting fields from the structure returned by the kern.proc.pid.<pid> sysctl. - 'stat' is aliased to 'status'. gdb/ChangeLog: * configure.ac: Check for kinfo_getfile in libutil. * configure: Regenerate. * config.in: Regenerate. * fbsd-nat.c: Include "fbsd-tdep.h". (fbsd_fetch_cmdline): New. (fbsd_fetch_kinfo_proc): Move earlier and change to return a bool rather than calling error. (fbsd_info_proc): New. (fbsd_thread_name): Report error if fbsd_fetch_kinfo_proc fails. (fbsd_wait): Report warning if fbsd_fetch_kinfo_proc fails. (fbsd_nat_add_target): Set "to_info_proc" to "fbsd_info_proc".
2018-01-08Fix GDB build failure when $development is falseYao Qi1-2/+2
We don't build GDB selftests bits when $development is false. However, if we turn bfd/development.sh:$development to false, common/selftest.c is compiled which is not expected. It causes the build failure, selftest.o: In function `selftests::run_tests(char const*)': binutils-gdb/gdb/common/selftest.c:97: undefined reference to `selftests::reset()' collect2: error: ld returned 1 exit status I fix this issue by putting selftest.o selftest-arch.o into CONFIG_OBS only when $development is true. After this is fixed, there are other build failures in maint.c, this patch fixes them as well. In the release mode, the output of these commands are: (gdb) maintenance selftest Selftests are not available in a non-development build. (gdb) maintenance selftest foo Selftests are not available in a non-development build. (gdb) maintenance info selftests Selftests are not available in a non-development build. gdb: 2018-01-08 Yao Qi <yao.qi@linaro.org> Simon Marchi <simon.marchi@ericsson.com> * Makefile.in (COMMON_SFILES): Remove selftest-arch.c and common/selftest.c. (COMMON_OBS): Remove selftest.o. * configure.ac: Append selftest-arch.c and common/selftest.c to CONFIG_SRCS. Append selftest-arch.o and selftest.o to COMMON_OBS. * configure: Re-generated. * maint.c (maintenance_selftest): Wrap selftests::run_tests with GDB_SELF_TEST. (maintenance_info_selftests): Likewise. gdb/testsuite: 2018-01-08 Simon Marchi <simon.marchi@ericsson.com> * gdb.gdb/unittest.exp: Match output in non-development mode.
2017-11-30Remove ioctl-based procfs support on SolarisRainer Orth1-185/+2
This is the previously mentioned patch to get rid of unstructured/ioctl-based procfs support in procfs.c. Given that support for structured procfs was introduced in Solaris 2.6 back in 1997 and we're just removing support for Solaris < 10, there's no point in carrying that baggage (and tons of support for IRIX and OSF/1 as well) around any longer. Most of the patch should be straightforward (removing support for !NEW_PROC_API, non-Solaris OSes and pre-Solaris 10 quirks). Only a few points need explanations: * <sys/syscall.h> was already included unconditionally in most places, so there's no need to have guards in a few remaining ones. * configure.host already obsoletes i?86-*-sysv4.2, i?86-*-sysv5, so NEW_PROC_API detection for those in configure.ac can go. * I'm still including <sys/procfs.h> with #define _STRUCTURED_PROC 1. Theoretically, it would be better to include <procfs.h> on Solaris (which includes that define), but that breaks the build over <procfs.h> vs. gdb's "procfs.h", and doesn't exist on Linux. * I've regenerated syscall_table[] in proc-events.c with a small script from Solaris 10, 11.3, 11.4 <sys/syscall.h>, so there should be no traces of older Solaris versions and other OSes left. * prsysent_t and DYNAMIC_SYSCALLS was only used for AIX 5, but AIX doesn't use procfs.c any longer, so all related code can go. The patch was generated with diff -w so one can easier see changes without being distracted by simple reindentations. So far, it has only been compiled and smoke-tested on amd64-pc-solaris2.1[01], sparcv9-sun-solaris2.1[01], and x86_64-pc-linux-gnu. Certainly needs more testing (Solaris 11.3 vs. 11.4, 32-bit gdb, testsuite once I've figured out what's wrong on Solaris 10 etc.), but it's enough to get a first impression how much cleanup is possible here. * configure.ac Don't check for sys/fault.h, sys/syscall.h, sys/proc.h. (NEW_PROC_API): Remove. (prsysent_t, pr_sigset_t, pr_sigaction64_t, pr_siginfo64_t): Likewise. * common/common.m4 (GDB_AC_COMMON): Don't check for sys/syscall.h. * configure: Regenerate. * config.in: Regenerate. * gdbserver/configure: Regenerate. * gdbserver/config.in: Regenerate. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Remove NEW_PROC_API test. * sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Likewise. * linux-btrace.c: Remove HAVE_SYS_SYSCALL_H test. * proc-api.c: Remove !NEW_PROC_API support. Remove HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests. Remove tests for macros always defined on Solaris. * proc-events.c: Remove !NEW_PROC_API support. Remove Remove HAVE_SYS_SYSCALL_H, HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests. (init_syscall_table): Remove non-Solaris syscalls. Remove tests for syscalls present on all Solaris versions. Add missing Solaris 10+ syscalls. (signal_table): Remove non-Solaris signals. Remove tests for signals present on all Solaris versions. (fault_table): Remove non-Solaris faults. Remove tests for faults present on all Solaris versions. * proc-flags.c: Remove !NEW_PROC_API support. (pr_flag_table): Remove non-Solaris and pre-Solaris 7 comments. Remove non-Solaris flags. * proc-why.c: Remove !NEW_PROC_API support. (pr_why_table): Remove meaningless comments. Remove tests for reasons present on all Solaris versions. Remove OSF/1 cases. (proc_prettyfprint_why): Likewise. * procfs.c: Remove !NEW_PROC_API and DYNAMIC_SYSCALLS support. Remove HAVE_SYS_FAULT_H and HAVE_SYS_SYSCALL_H tests. Remove WA_READ test, IRIX watchpoint support. (gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t): Replace by base types. Change users. (gdb_praddset, gdb_prdelset, gdb_premptysysset, gdb_praddsysset) (gdb_prdelset, gdb_pr_issyssetmember): Replace by base macros. Change callers. Remove CTL_PROC_NAME_FMT tests. (gdb_prstatus_t, gdb_lwpstatus_t): Replace by base types. Change users. (sysset_t_size): Remove. Use sizeof (sysset_t) in callers. Remove PROCFS_DONT_PIOCSSIG_CURSIG support. (proc_modify_flag): Replace GDBRESET by PCUNSET. Remove PR_ASYNC, PR_KLC tests. (proc_unset_inherit_on_fork): Remove PR_ASYNC test. (proc_parent_pid): Remove PCWATCH etc. tests. (proc_set_watchpoint): Remove !PCWATCH && !PIOCSWATCH support. Remove PCAGENT test. (proc_get_nthreads) [PIOCNTHR && PIOCTLIST]: Remove. Remove SYS_lwpcreate || SYS_lwp_create test. (proc_get_current_thread): Likewise. [PIOCNTHR && PIOCTLIST]: Remove. [PIOCLSTATUS]: Remove. (procfs_debug_inferior): Remove non-Solaris cases, conditionals. [PRFS_STOPEXEC]: Remove. (syscall_is_lwp_exit): Remove non-Solaris cases, conditionals. (syscall_is_exit): Likewise. (syscall_is_exec): Likewise. (syscall_is_lwp_create): Likewise. Remove SYS_syssgi support. (procfs_wait): Remove PR_ASYNC, !PIOCSSPCACT tests. [SYS_syssgi]: Remove. Remove non-Solaris cases, conditionals. (unconditionally_kill_inferior) [PROCFS_NEED_PIOCSSIG_FOR_KILL]: Remove. (procfs_init_inferior) [SYS_syssgi]: Remove. (procfs_set_exec_trap) [PRFS_STOPEXEC]: Remove. (procfs_inferior_created) [SYS_syssgi]: Remove. (procfs_set_watchpoint): Remove !AIX5 test. (procfs_stopped_by_watchpoint): Remove FLTWATCH test, FLTKWATCH case. (mappingflags) [MA_PHYS]: Remove. (info_mappings_callback): Remove PCAGENT test. Remove PIOCOPENLWP || PCAGENT test.
2017-11-27Move python object files to python subdirectoryTom Tromey1-1/+1
Move the object files corresponding to python/*.c to the python subdirectory in the build tree. Because special CFLAGS are passed just to Python compilations, this patch also required the addition of a pattern rule to update INTERNAL_CFLAGS for here. ChangeLog 2017-11-27 Tom Tromey <tom@tromey.com> * Makefile.in (SUBDIR_PYTHON_OBS): Redefine. (CONFIG_SRC_SUBDIR): Add python. (%.o): Remove python rule. (python/%.o): New rule. * configure: Rebuild. * configure.ac (CONFIG_OBS): Refer to python/python.o
2017-11-27Move guile object files to guile subdirectoryTom Tromey1-1/+1
Move the object files corresponding to guile/*.c to the guile subdirectory in the build tree. ChangeLog 2017-11-27 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac (CONFIG_OBS): Refer to guile/guile.o. * Makefile.in (SUBDIR_GUILE_OBS): Redefine. (CONFIG_SRC_SUBDIR): Add guile. (%.o): Remove guile rule.
2017-11-27A simpler way to make the "arch" build directoryTom Tromey1-15/+0
This implements a simpler way to make the "arch" build directory -- namely, now it is done as an order-only dependency in the Makefile, rather than being created when config.status is run. This simpler because it means that the build directories can be changed without re-running autoconf. ChangeLog 2017-11-27 Tom Tromey <tom@tromey.com> * configure.ac (CONFIG_SRC_SUBDIR): Don't subst. * configure: Rebuild. * Makefile.in (CONFIG_SRC_SUBDIR): Redefine. (CONFIG_DEP_SUBDIR): New variable. (%.o): Add order-only dependency. ($(CONFIG_DEP_SUBDIR)): New target.
2017-11-22Target FP: Make use of MPFR if availableUlrich Weigand1-0/+499
This second patch introduces mfpr_float_ops, an new implementation of target_float_ops. This implements precise emulation of target floating-point formats using the MPFR library. This is then used to perform operations on types that do not match any host type. Note that use of MPFR is still not required. The patch adds a configure option --with-mpfr similar to --with-expat. If use of MPFR is disabled via the option or MPFR is not available, code will fall back to current behavior. This means that operations on types that do not match any host type will be implemented on the host long double type instead. A new test case verifies that we can correctly print the largest __float128 value now. gdb/ChangeLog: 2017-11-22 Ulrich Weigand <uweigand@de.ibm.com> * NEWS: Document use of GNU MPFR. * README: Likewise. * Makefile.in (LIBMPFR): Add define. (CLIBS): Add $(LIBMPFR). * configure.ac: Add --with-mpfr configure option. * configure: Regenerate. * config.in: Regenerate. * target-float.c [HAVE_LIBMPFR]: Include <mpfr.h>. (class mpfr_float_ops): New type. (mpfr_float_ops::from_target): Two new overloaded functions. (mpfr_float_ops::to_target): Likewise. (mpfr_float_ops::to_string): New function. (mpfr_float_ops::from_string): Likewise. (mpfr_float_ops::to_longest): Likewise. (mpfr_float_ops::from_longest): Likewise. (mpfr_float_ops::from_ulongest): Likewise. (mpfr_float_ops::to_host_double): Likewise. (mpfr_float_ops::from_host_double): Likewise. (mpfr_float_ops::convert): Likewise. (mpfr_float_ops::binop): Likewise. (mpfr_float_ops::compare): Likewise. (get_target_float_ops): Use mpfr_float_ops if available. gdb/doc/ChangeLog: 2017-11-22 Ulrich Weigand <uweigand@de.ibm.com> * gdb.texinfo (Requirements): Document use of GNU MPFR. gdb/testsuite/ChangeLog: 2017-11-22 Ulrich Weigand <uweigand@de.ibm.com> * gdb.base/float128.c (large128): New variable. * gdb.base/float128.exp: Add test to print largest __float128 value.
2017-11-06Don't check termio.h and sgtty.h in common/common.m4 eitherPedro Alves1-1/+1
common/common.m4 still had checks for termio.h/sgtty.h that are stale now. Remove them. gdb/ChangeLog: 2017-11-06 Pedro Alves <palves@redhat.com> * common/common.m4 (GDB_AC_COMMON): No longer check termio.h nor sgtty.h. * config.in, configure: Regenerate. gdb/gdbserver/ChangeLog: 2017-11-06 Pedro Alves <palves@redhat.com> * config.in, configure: Regenerate.
2017-11-06Assume termios is available, remove support for termio and sgttyPedro Alves1-2/+1
This commit garbage collects the termio and sgtty support. GDB's terminal handling code still has support for the old termio and sgtty interfaces in addition to termios. However, I think it's pretty safe to assume that for a long, long time, Unix-like systems provide termios. GNU/Linux, Solaris, Cygwin, AIX, DJGPP, macOS and the BSDs all have had termios.h for many years. Looking around the web, I found discussions about FreeBSD folks trying to get rid of old sgtty.h a decade ago: https://lists.freebsd.org/pipermail/freebsd-hackers/2007-March/019983.html So I think support for termio and sgtty in GDB is just dead code that is never compiled anywhere and is just getting in the way. For example, serial_noflush_set_tty_state and the raw<->cooked concerns mentioned in inflow.c only exist because of sgtty (see hardwire_noflush_set_tty_state). Regtested on GNU/Linux. Confirmed that I can still build Solaris, DJGPP and AIX GDB and that the resulting GDBs still include the termios.h-guarded code. Confirmed mingw-w64 GDB still builds and skips the termios.h-guarded code. gdb/ChangeLog: 2017-11-06 Pedro Alves <palves@redhat.com> * Makefile.in (SER_HARDWIRE): Update comment. (HFILES_NO_SRCDIR): Remove gdb_termios.h. * common/gdb_termios.h: Delete file. * common/job-control.c: Include termios.h and unistd.h instead of gdb_termios.h. (gdb_setpgid): Remove HAVE_TERMIOS || TIOCGPGRP preprocessor check. (have_job_control): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS. Remove sgtty code. * configure.ac: No longer check for termio.h and sgtty.h. * configure: Regenerate. * inflow.c: Include termios.h instead of gdb_termios.h. Replace PROCESS_GROUP_TYPE checks with HAVE_TERMIOS_H checks throughout. Replace PROCESS_GROUP_TYPE references with pid_t references throughout. (gdb_getpgrp): Delete. (set_initial_gdb_ttystate): Use tcgetpgrp instead of gdb_getpgrp. (child_terminal_inferior): Remove comment. Remove sgtty code. (child_terminal_ours_1): Use tcgetpgrp directly instead of gdb_getpgrp. Use serial_set_tty_state instead aof serial_noflush_set_tty_state. Remove sgtty code. * inflow.h: Include unistd.h instead of gdb_termios.h. Replace PROCESS_GROUP_TYPE check with HAVE_TERMIOS_H check. (inferior_process_group): Now returns pid_t. * ser-base.c (ser_base_noflush_set_tty_state): Delete. * ser-base.h (ser_base_noflush_set_tty_state): Delete. * ser-event.c (serial_event_ops): Update. * ser-go32.c (dos_noflush_set_tty_state): Delete. (dos_ops): Update. * ser-mingw.c (hardwire_ops, tty_ops, pipe_ops, tcp_ops): Update. * ser-pipe.c (pipe_ops): Update. * ser-tcp.c (tcp_ops): Update. * ser-unix.c: Include termios.h instead of gdb_termios.h. Remove HAVE_TERMIOS checks. [HAVE_TERMIO] (struct hardwire_ttystate): Delete. [HAVE_SGTTY] (struct hardwire_ttystate): Delete. (get_tty_state, set_tty_state): Drop termio and sgtty code, and assume termios. (hardwire_noflush_set_tty_state): Delete. (hardwire_print_tty_state, hardwire_drain_output) (hardwire_flush_output, hardwire_flush_input) (hardwire_send_break, hardwire_raw, hardwire_setbaudrate) (hardwire_setstopbits, hardwire_setparity): Drop termio and sgtty code, and assume termios. (hardwire_ops): Update. (_initialize_ser_hardwire): Remove HAVE_TERMIOS check. * serial.c (serial_noflush_set_tty_state): Delete. * serial.h (serial_noflush_set_tty_state): Delete. (serial_ops::noflush_set_tty_state): Delete. gdb/gdbserver/ChangeLog: 2017-11-06 Pedro Alves <palves@redhat.com> * configure.ac: No longer check for termio.h and sgtty.h. * configure: Regenerate. * remote-utils.c: Include termios.h instead of gdb_termios.h. (remote_open): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS. Remove termio and sgtty code.
2017-10-09Don't try building gdb against guile-2.2Simon Marchi1-2/+2
GDB currently doesn't build with Guile 2.2 (see PR 21104). If one has both Guile 2.2 and 2.0 installed, GDB will pick up Guile 2.2 first and fail building. Until somebody does the work of adapting the GDB code to Guile 2.2, we should not try using it. This patch therefore removes it from configure. gdb/ChangeLog: * configure.ac (try_guile_versions): Remove guile-2.2. * configure: Regenerate.
2017-10-06[RFC] Replicate src dir in build dirYao Qi1-0/+15
Nowadays, GDB build tree is almost flat, but source tree isn't. We have arch/ nat/ target/ common/ cli/ mi/ tui/ python/ guile/ directories. We need to some rules in Makefile for source files in different source directories, like, # Rules for compiling .c files in the various source subdirectories. %.o: ${srcdir}/arch/%.c $(COMPILE) $< $(POSTCOMPILE) %.o: ${srcdir}/nat/%.c $(COMPILE) $< $(POSTCOMPILE) so we should take care of some special case that files' base name is the same, like, # Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the # object file generate by gdb/agent.c. common-agent.o: $(srcdir)/common/agent.c $(COMPILE) $(srcdir)/common/agent.c $(POSTCOMPILE) As we add more and more files in different directories, it becomes tricky to name files, because we need take this into account. This patch takes the first step toward "Replicate src dir in build dir", that is, we create arch/ directory in buildtree, and put amd64.o there as an example. Dependency tracking is updated for files with directory name. Currently, when we build amd64.o, "-c -o amd64.o -MT amd64.o -MMD -MP -MF .deps/amd64.Tpo" with this patch applied, it becomes, "-c -o arch/amd64.o -MT arch/amd64.o -MMD -MP -MF arch/.deps/amd64.o.Tpo" "make clean" removes the object files, and "make distclean" removes .deps additionally. configure file create .deps directory in each of CONFIG_SRC_SUBDIR, and pass it to Makefile.in, so that "make clean" and "make distclean" can remove stuffs there. If people agree with this change, I'll add more directories to CONFIG_SRC_SUBDIR. gdb: 2017-10-06 Yao Qi <yao.qi@linaro.org> * Makefile.in (CONFIG_SRC_SUBDIR): New. (ALL_64_TARGET_OBS): Replace amd64.o with arch/amd64.o. (clean): Remove object files and dependency files. (distclean): Remove the directory. * configure.ac: Invoke AC_CONFIG_COMMANDS. * configure: Re-generated. * configure.tgt: Replace amd64.o with arch/amd64.o.
2017-09-26Allow linking GDB with ncurseswMatthias Klose1-3/+3
Triggered by https://launchpad.net/bugs/1275210, to be able to cope with UTF-8 characters in gdbtui. Reference: https://sourceware.org/ml/gdb-patches/2017-09/msg00356.html gdb/ChangeLog: 2017-09-26 Matthias Klose <doko@ubuntu.com> * configure.ac: Search ncursesw before ncurses. Check ncursesw/ncurses.h before ncurses/ncurses.h. * gdb_curses.h: Include <ncursesw/ncurses.h> * config.in, configure: Regenerate.
2017-09-26Remove support for Solaris < 10 (PR gdb/22185)Rainer Orth1-172/+0
Given that GCC has obsoleted/removed support for Solaris 9 in GCC 4.9/5 in 2013: https://gcc.gnu.org/gcc-4.9/changes.html https://gcc.gnu.org/ml/gcc-patches/2013-05/msg00728.html and the last gdb version that can be compiled with gcc 4.9 is 7.12.1 only when configured with --disable-build-with-cxx, it's time to obsolete/remove support for Solaris < 10. This patch does this, simplifying configure.nat along the way (only a single sol2 configuration with variants for i386 and sparc). Some configure checks for older Solaris versions can go, too, and the check for libthread_db.so.1 removed: * Since Solaris 10, dlopen has moved to libc and libdl.so is just a filter on ld.so.1, so no need to check. * $RDYNAMIC is already handled above (and is a no-op with Solaris ld anyway). Both proc-service.c and sol-thread.c lose support for (Solaris-only) PROC_SERVICE_IS_OLD. The attached revised patch has been tested on sparcv9-sun-solaris2.10, sparcv9-sun-solaris2.11.4, amd64-pc-solaris2.10, amd64-pc-solaris2.11.4, and x86_64-pc-linux-gnu. I've also started an i386-pc-solaris2.9 build to check that it really stops as expected. PR gdb/22185 * configure.host <*-*-solaris2.[01], *-*-solaris2.[2-9]*>: Mark as obsolete. Use gdb_host sol2 for i[34567]86-*-solaris2*, x86_64-*-solaris2*. Remove i386sol2 support. * configure.nat <i386sol2>: Remove. <sol2-64>: Fold into ... <sol2>: ... this. Move common settings to default section. Add sol-thread.o. * configure.tgt <i[34567]86-*-solaris2.1[0-9]*, x86_64-*-solaris2.1[0-9]*>: Rename to ... <i[34567]86-*-solaris2*, x86_64-*-solaris2*>: ... this. <i[34567]86-*-solaris*>: Remove. <sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*>: Remove. * configure.ac: Remove wctype in libw check. (_MSE_INT_H): Don't define on Solaris 7-9. <solaris*>: Remove libthread_db.so.1 check. * configure: Regenerate. * config.in: Regenerate. * proc-service.c: Remove PROC_SERVICE_IS_OLD handling. (gdb_ps_prochandle_t, gdb_ps_read_buf_t, gdb_ps_write_buf_t) (gdb_ps_size_t): Remove. Use base types in users. * sol-thread.c: Likewise, also for gdb_ps_addr_t. * NEWS (Changes since GDB 8.0): Document Solaris 2.0-9 removal.
2017-09-22Fix gdb 8.1 Solaris compilationRainer Orth1-3/+10
I just tried to compile gdb trunk on Solaris 11.4 (formerly 12), and failed for a couple of reasons: * In file included from /usr/include/python2.7/Python.h:128:0, from /vol/src/gnu/gdb/gdb/dist/gdb/python/python-internal.h:94, from /vol/src/gnu/gdb/gdb/dist/gdb/python/py-instruction.h:23, from /vol/src/gnu/gdb/gdb/dist/gdb/python/py-instruction.c:21: /usr/include/python2.7/ceval.h:67:0: error: ignoring #pragma no_inline [-Werror=unknown-pragmas] #pragma no_inline(PyEval_EvalFrameEx) ^ New in Solaris 11.4: <python2.7/ceval.h> uses a Studio-only #pragma. I've disabled the warning in warnings.m4. * /vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c: In function ‘int pipe_open(serial*, const char*)’: /vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c:77:9: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations] pid = vfork (); ^ /vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c:77:16: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations] pid = vfork (); ^ Since Solaris 11, vfork () is marked deprecated in <unistd.h>. cf. vfork(2): The vfork() and vforkx() functions are deprecated. Their sole legiti- mate use as a prelude to an immediate call to a function from the exec family can be achieved safely by posix_spawn(3C) or posix_spawnp(3C). Again, I've disabled the warning. * /vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c: In function ‘void shell_escape(const char*, int)’: /vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c:750:14: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations] if ((pid = vfork ()) == 0) ^ /vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c:750:21: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations] if ((pid = vfork ()) == 0) ^ Same problem. * /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_init_inferior(target_ops*, int)’: /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:4380:30: error: ‘START_INFERIOR_TRAPS_EXPECTED’ was not declared in this scope gdb_startup_inferior (pid, START_INFERIOR_TRAPS_EXPECTED); ^ defined in nat/fork-inferior.h, need to include that header /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_create_inferior(target_ops*, const char*, const string&, char**, int)’: /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:4605:38: error: ‘fork_inferior’ was not declared in this scope NULL, NULL, shell_file, NULL); ^ likewise /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_info_proc(target_ops*, const char*, info_proc_what)’: /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:5124:20: error: ‘argv’ was not declared in this scope for (char *arg : argv) ^ Typo, should be built_argv instead! * Undefined first referenced symbol in file fork_inferior(char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, char**, void (*)(), void (*)(int), void (*)(), char const*, void (*)(char const*, char* const*, char* const*)) procfs.o startup_inferior(int, int, target_waitstatus*, ptid_t*) fork-child.o ld: fatal: symbol referencing errors collect2: error: ld returned 1 exit status make[2]: *** [Makefile:2249: gdb] Error 1 Need to add fork-inferior.o to NATDEPFILES. With the changes below, I can build gdb on sparcv9-sun-solaris2.11 and amd64-pc-solaris2.11 and a simple smoke test (gdb/gdb gdb/gdb) works.
2017-09-04Define _KMEMUSER before including BSD kernel headers.John Baldwin1-0/+1
Recent versions of NetBSD hide certain kernel structures needed by the KVM target from userland unless this macro is defined. gdb/ChangeLog: * bsd-kvm.o: Define _KMEMUSER. * configure.ac: Define _KMEMUSER when checking for "struct lwp". * configure: Regenerate.
2017-06-17gdb: Add -Wno-mismatched-tagsSimon Marchi1-1/+2
clang complains that for some types, we use both the class and struct keywords in different places. It's not really a problem, so I think we can safely turn this warning off. gdb/ChangeLog: * configure: Re-generate. * warning.m4 (build_warnings): Add -Wno-mismatched-tags. gdb/gdbserver/ChangeLog: * configure: Re-generate.
2017-06-17gdb: Use -Werror when checking for (un)supported warning flagsSimon Marchi1-2/+2
In warning.m4, we pass all the warning flags one by one to the compiler to test if they are supported by this particular compiler. If the compiler exits with an error, we conclude that this warning flag is not supported and exclude it. This allows us to use warning flags without having to worry about which versions of which compilers support each flag. clang, by default, only emits a warning if an unknown flag is passed: warning: unknown warning option '-Wfoo' [-Wunknown-warning-option] The result is that we think that all the warning flags we use are supported by clang (they are not), and the compilation fails later when building with -Werror, since the aforementioned warning becomes an error. The fix is to also pass -Werror when probing for supported flags, then we'll correctly get an error when using an unknown warning, and we'll exclude it: error: unknown warning option '-Wfoo' [-Werror,-Wunknown-warning-option] I am not sure why there is a change in a random comment in gdbserver/configure, but I suppose it's a leftfover from a previous patch, so I included it. gdb/ChangeLog: * configure: Re-generate. * warning.m4: Pass -Werror to compiler when checking for supported warning flags. gdb/gdbserver/ChangeLog: * configure: Re-generate.
2017-05-31config, btrace: check for pt_insn_event in libiptMarkus Metzger1-57/+93
Version 2 of libipt adds an event system to instruction flow decoders and deprecates indicating events via flags in struct pt_insn. Add configuration checks to determine which version we have. gdb/ * configure.ac: Check for pt_insn_event, struct pt_insn.enabled, and struct pt_insn.resynced. * configure: Regenerated. * config.in: Regenerated.
2017-05-17nat_extra_makefile_frag -> nat_makefile_fragPedro Alves1-2/+2
gdb/ChangeLog: 2017-05-17 Pedro Alves <palves@redhat.com> * Makefile.in (nat_extra_makefile_frag): Rename to ... (nat_makefile_frag): ... this. All references updated. * configure.ac: Likewise. * configure.nat: Likewise. Enhance comments. * configure: Regenerate.
2017-05-06Introduce "gdb/configure.nat" (and delete "gdb/config/*/*.mh" files)Sergio Durigan Junior1-19/+20
Due to my ongoing work to make it possible for gdbserver to start the inferior using the shell, I had to share the fork_inferior function under the "nat/" directory. In order to do that, I created a new file and put the function there; however, this meant that I now had to update some of the *.mh files (under "gdb/config") and add the new file as a dependency to be built natively. Bleh... After talking a bit to Pedro about this, the idea came up to write a new "gdb/configure.nat" file, a la "gdb/configure.tgt", which would concentrate all of the native settings for each host/system. I decided to tackle this issue. The patch is simple. All of the previous Makefile variables that were being declared inside the *.mh files are now inside "gdb/Makefile.in", and "gdb/configure" is responsible for AC_SUBST'ing them. The definitions of these variables were put inside "gdb/configure.nat", so now they're shell variables. For excerpts of Makefile code, one must create a file under "gdb/config/${gdb_cpu_host}" and reference it on the "nat_extra_makefile_frag" variable. It should now be easier to update the native dependencies of hosts in this single file. This has been tested on x86_64 without regressions. gdb/ChangeLog: 2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in: Remove "@host_makefile_frag@". Add variables NAT_FILE, NATDEPFILES, NAT_CDEPS, LOADLIBES, MH_CFLAGS, XM_CLIBS, NAT_GENERATED_FILES, HAVE_NATIVE_GCORE_HOST. Add "@nat_extra_makefile_frag@". (Makefile): Remove dependency on "@frags@". ($(GNULIB_BUILDDIR)/Makefile): Likewise. (data-directory/Makefile): Likewise. * config/aarch64/linux.mh: Deleted; moved contents to "gdb/configure.nat". * config/alpha/alpha-linux.mh: Likewise. * config/alpha/nbsd.mh: Likewise. * config/arm/linux.mh: Likewise. * config/arm/nbsdelf.mh: Likewise. * config/i386/cygwin.mh: Likewise. * config/i386/cygwin64.mh: Likewise. * config/i386/darwin.mh: Likewise. * config/i386/fbsd.mh: Likewise. * config/i386/fbsd64.mh: Likewise. * config/i386/go32.mh: Likewise. * config/i386/i386gnu.mh: Likewise. * config/i386/i386sol2.mh: Likewise. * config/i386/linux.mh: Likewise. * config/i386/linux64.mh: Likewise. * config/i386/mingw.mh: Likewise. * config/i386/mingw64.mh: Likewise. * config/i386/nbsd64.mh: Likewise. * config/i386/nbsdelf.mh: Likewise. * config/i386/nto.mh: Likewise. * config/i386/obsd.mh: Likewise. * config/i386/obsd64.mh: Likewise. * config/i386/sol2-64.mh: Likewise. * config/ia64/linux.mh: Likewise. * config/m32r/linux.mh: Likewise. * config/m68k/linux.mh: Likewise. * config/m68k/nbsdelf.mh: Likewise. * config/m68k/obsd.mh: Likewise. * config/m88k/obsd.mh: Likewise. * config/mips/fbsd.mh: Likewise. * config/mips/linux.mh: Likewise. * config/mips/nbsd.mh: Likewise. * config/mips/obsd64.mh: Likewise. * config/pa/linux.mh: Likewise. * config/pa/nbsd.mh: Likewise. * config/pa/obsd.mh: Likewise. * config/powerpc/aix.mh: Likewise. * config/powerpc/fbsd.mh: Likewise. * config/powerpc/linux.mh: Likewise. * config/powerpc/nbsd.mh: Likewise. * config/powerpc/obsd.mh: Likewise. * config/powerpc/ppc64-linux.mh: Likewise. * config/powerpc/spu-linux.mh: Likewise. * config/s390/linux.mh: Likewise. * config/sh/nbsd.mh: Likewise. * config/sparc/fbsd.mh: Likewise. * config/sparc/linux.mh: Likewise. * config/sparc/linux64.mh: Likewise. * config/sparc/nbsd64.mh: Likewise. * config/sparc/nbsdelf.mh: Likewise. * config/sparc/obsd64.mh: Likewise. * config/sparc/sol2.mh: Likewise. * config/tilegx/linux.mh: Likewise. * config/vax/nbsdelf.mh: Likewise. * config/vax/obsd.mh: Likewise. * config/xtensa/linux.mh: Likewise. * config/i386/i386gnu.mn: New file, with excerpts from "config/i386/i386gnu.mh". * configure: Regenerate. * configure.ac: Rewrite code to use "gdb/configure.nat" instead of *.mh files under "gdb/config". * configure.nat: New file, with contents from the "gdb/config/*/*.mh" files. gdb/doc/ChangeLog: 2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile: Remove "@host_makefile_frag@".
2017-05-05gdb: Disable -Werror for -Wmaybe-uninitializedPedro Alves1-1/+1
Newer GCCs are triggering false-positive -Wmaybe-uninitialized warnings around code that uses gdb::optional: https://sourceware.org/ml/gdb-patches/2017-05/msg00118.html Using std::optional wouldn't help, it triggers the same warnings: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80635 Initializing the variables to quiet the warning would defeat the purpose of gdb::optional. Making the optional ctor memset its storage would be a pessimization. Wrapping gdb::optional's internals with "#pragma GCC diagnostic push/ignored/pop" doesn't work, we'd have to wrap uses of gdb::optional instead, which I think would get unwieldy and ugly as we start using gdb::optional more and more. The -Wmaybe-uninitialized warning is documented as producing false positives (unlike -Wuninialized), so until we find a better workaround, disable -Werror for this warning. You'll still see the warning when building gdb, but it won't cause a build failure. Tested by building with gcc 4.8.5, 5.3.1, and gcc trunk (20170428). gdb/ChangeLog: 2017-05-05 Pedro Alves <palves@redhat.com> * warning.m4 (build_warnings): Add -Wno-error=maybe-uninitialized. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2017-05-05 Pedro Alves <palves@redhat.com> * configure: Regenerate.
2017-05-03Regenerate gdb/{,gdbserver/}configure (for commit ↵Sergio Durigan Junior1-1/+1
be628ab814f1c90e185d7482d27aa8a991ab5837) On commit be628ab814f1c90e185d7482d27aa8a991ab5837, both common/common.m4 was modified in order to check for the presence of 'termios.h', 'termio.h' and 'sgtty.h'. However, I forgot to regenerate both gdb/configure and gdb/gdbserver/configure. This commit does that. gdb/ChangeLog: 2017-05-03 Sergio Durigan Junior <sergiodj@redhat.com> * configure: Regenerate. gdb/gdbserver/ChangeLog: 2017-05-03 Sergio Durigan Junior <sergiodj@redhat.com> * configure: Regenerate.
2017-04-05-Wwrite-strings: Remove -Wno-write-stringsPedro Alves1-1/+1
AFAIK GDB is now free from -Wwrite-strings warnings. A few warnings may be left behind in some host-specific code, but those should be few and easy to fix. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * warning.m4 (build_warnings): Remove -Wno-write-strings. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * configure: Regenerate.
2017-02-23Introduce gdb::function_viewPedro Alves1-0/+2
This commit adds a new function_view type. This type holds a non-owning reference to a callable. It is meant to be used as callback type of functions, instead of using the C-style pair of function pointer and 'void *data' arguments. function_view allows passing references to stateful function objects / lambdas with captures as callbacks efficiently, while function pointer + 'void *' does not. See the intro in the new function-view.h header for more. Unit tests included, put into a new gdb/unittests/ subdir. gdb/ChangeLog: 2017-02-23 Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS, SUBDIR_UNITTESTS_OBS): New. (%.o) <unittests/%.c>: New pattern. * configure.ac ($development): Add $(SUBDIR_UNITTESTS_OBS) to CONFIG_OBS, and $(SUBDIR_UNITTESTS_SRCS) to CONFIG_SRCS. * common/function-view.h: New file. * unittests/function-view-selftests.c: New file. * configure: Regenerate.
2016-11-22Fix spelling mistakes in comments in configure scriptsAmbrogino Modigliani1-1/+1
All changes are limited to comments, and no run-time behavior is affected. bfd/ChangeLog: 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> * warning.m4: Fix spelling in comments. * configure.ac: Fix spelling in comments. * configure: Regenerate. binutils/ChangeLog: 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> * configure: Regenerate. gdb/ChangeLog: 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> * configure.ac: Fix spelling in comments. * configure: Regenerate. gas/ChangeLog: 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> * configure: Regenerate. gold/ChangeLog: 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> * configure: Regenerate. gprof/ChangeLog: 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> * configure: Regenerate. ld/ChangeLog: 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> * configure: Regenerate. opcodes/ChangeLog: 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> * configure: Regenerate.
2016-11-17Remove code that checks for GNU/non-GNU makeSimon Marchi1-97/+0
Since GNU make is now required to build GDB, we can remove everything that checks whether the current make implemention is the GNU one or not. I simply removed the @GMAKE_TRUE@ prefixes and removed the whole lines that were prefixed with @GMAKE_FALSE@. I removed the code in the configure scripts that set those variables. I also removed the following bits from the configure scripts: AC_CHECK_PROGS(MAKE, make): GNU make already defines a MAKE variable internally to be used when invoking Makefiles recursively. I don't see this variable being used anywhere else (in scripts for example), so I think it's safe for removal. AC_PROG_MAKE_SET: This macro defines a SET_MAKE output variable, which is meant to be used in Makefiles to define the MAKE variable when using an implementation of make that doesn't already define it. Since we are now requiring GNU make, we don't need it anymore. Plus, I don't see SET_MAKE being used anywhere, so I don't think it was actually doing anything... gdb/ChangeLog: * Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines prefixed with @GMAKE_FALSE@. Update comment related to non-GNU make. * configure.ac: Remove checks for the make program. * configure: Re-generate. gdb/gdbserver/ChangeLog: * Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines prefixed with @GMAKE_FALSE@. Update comment related to non-GNU make. * configure.ac: Remove checks for the make program. * configure: Re-generate. gdb/testsuite/ChangeLog: * Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines prefixed with @GMAKE_FALSE@. Update comment related to non-GNU make. * configure.ac: Remove checks for the make program. * configure: Re-generate.
2016-10-31Remove IRIX 5 <sys/proc.h> _KMEMUSER workaroundMaciej W. Rozycki1-6/+0
Complement commit 3831839c089c ("Delete IRIX support") and remove the IRIX 5 <sys/proc.h> _KMEMUSER workaround from the `configure' script, as IRIX is no longer a supported host configuration. gdb/ * configure.ac <mips-sgi-irix5*>: Remove <sys/proc.h> _KMEMUSER workaround. * configure: Regenerate. * config.in: Regenerate.
2016-10-28gdb: Require C++11Pedro Alves1-1/+980
Use AX_CXX_COMPILE_STDCXX to detect if the compiler supports C++11, and if -std=xxx switches are necessary to enable C++11. We need to tweak AX_CXX_COMPILE_STDCXX a bit though. Pristine upstream AX_CXX_COMPILE_STDCXX appends -std=gnu++11 to CXX directly. That doesn't work for us, because the top level Makefile passes CXX down to subdirs, and that overrides whatever gdb/Makefile may set CXX to. The result would be that a make invocation from the build/gdb/ directory would use "g++ -std=gnu++11" as expected, while a make invocation at the top level would not. So instead of having AX_CXX_COMPILE_STDCXX set CXX directly, tweak it to AC_SUBST a separate variable -- CXX_DIALECT -- and use '$(CXX) (CXX_DIALECT)' to compile/link. Confirmed that this enables C++11 starting with gcc 4.8, the first gcc release with full C++11 support. Also confirmed that configure errors out gracefully with older GCC releases: checking whether /opt/gcc-4.7/bin/g++ supports C++11 features by default... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++0x... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++0x... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with +std=c++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -h std=c++11... no configure: error: *** A compiler with support for C++11 language features is required. Makefile:9451: recipe for target 'configure-gdb' failed make[1]: *** [configure-gdb] Error 1 make[1]: Leaving directory '/home/pedro/brno/pedro/gdb/mygit/cxx-convertion/build-gcc-4.7' If we need to revert back to making C++11 optional, all that's necessary is to change the "mandatory" to "optional" in configure.ac and regenerate configure (both gdb and gdbserver). gdb/ChangeLog: 2016-10-28 Pedro Alves <palves@redhat.com> * Makefile.in (CXX_DIALECT): Get from configure. (COMPILE.pre, CC_LD): Append $(CXX_DIALECT). (FLAGS_TO_PASS): Pass CXX_DIALECT. * acinclude.m4: Include ax_cxx_compile_stdcxx.m4. * ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP. * configure.ac: Call AX_CXX_COMPILE_STDCXX. * config.in: Regenerate. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2016-10-28 Pedro Alves <palves@redhat.com> * Makefile.in (CXX_DIALECT): Get from configure. (COMPILE.pre, CC_LD): Append $(CXX_DIALECT). * acinclude.m4: Include ../ax_cxx_compile_stdcxx.m4. * configure.ac: Call AX_CXX_COMPILE_STDCXX. * config.in: Regenerate. * configure: Regenerate.
2016-09-05gdb/: Require a C++ compilerPedro Alves1-49/+5
This removes all support for building gdb & gdbserver with a C compiler from gdb & gdbserver's build machinery. gdb/ChangeLog: 2016-09-05 Pedro Alves <palves@redhat.com> * NEWS: Mention that a C++ compiler is now required. * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove. (COMPILE.pre, CC_LD): Use CXX directly. (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly. * acinclude.m4: Don't include build-with-cxx.m4. * build-with-cxx.m4: Delete file. * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call. * warning.m4: Assume $enable_build_with_cxx is yes. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2016-09-05 Pedro Alves <palves@redhat.com> * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove. (COMPILE.pre, CC_LD): Use CXX directly. (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly. * acinclude.m4: Don't include build-with-cxx.m4. * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call. * configure: Regenerate.
2016-08-09Fix PR gdb/18653: gdb disturbs inferior's inherited signal dispositionsPedro Alves1-1/+1
gdb's (or gdbserver's) own signal handling should not interfere with the signal dispositions their spawned children inherit. However, it currently does. For example, some paths in gdb cause SIGPIPE to be set to SIG_IGN, and as consequence, the child starts with SIGPIPE to set to SIG_IGN too, even though gdb was started with SIGPIPE set to SIG_DFL. This is because the exec family of functions does not reset the signal disposition of signals that are set to SIG_IGN: http://pubs.opengroup.org/onlinepubs/7908799/xsh/execve.html Signals set to the default action (SIG_DFL) in the calling process image are set to the default action in the new process image. Signals set to be ignored (SIG_IGN) by the calling process image are set to be ignored by the new process image. Signals set to be caught by the calling process image are set to the default action in the new process image (see <signal.h>). And neither does it reset signal masks or flags. In order to be transparent, when spawning new child processes to debug (with "run", etc.), reset signal actions and mask back to what was originally inherited from gdb/gdbserver's parent, just before execing the target program to debug. gdb/ChangeLog: 2016-08-09 Pedro Alves <palves@redhat.com> PR gdb/18653 * Makefile.in (SFILES): Add common/signals-state-save-restore.c. (HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h. (COMMON_OBS): Add signals-state-save-restore.o. (signals-state-save-restore.o): New rule. * configure: Regenerate. * fork-child.c: Include "signals-state-save-restore.h". (fork_inferior): Call restore_original_signals_state. * main.c: Include "signals-state-save-restore.h". (captured_main): Call save_original_signals_state. * common/common.m4: Add sigaction to AC_CHECK_FUNCS checks. * common/signals-state-save-restore.c: New file. * common/signals-state-save-restore.h: New file. gdb/gdbserver/ChangeLog: 2016-08-09 Pedro Alves <palves@redhat.com> PR gdb/18653 * Makefile.in (OBS): Add signals-state-save-restore.o. (signals-state-save-restore.o): New rule. * config.in: Regenerate. * configure: Regenerate. * linux-low.c: Include "signals-state-save-restore.h". (linux_create_inferior): Call restore_original_signals_state. * server.c: Include "dispositions-save-restore.h". (captured_main): Call save_original_signals_state. gdb/testsuite/ChangeLog: 2016-08-09 Pedro Alves <palves@redhat.com> PR gdb/18653 * gdb.base/signals-state-child.c: New file. * gdb.base/signals-state-child.exp: New file. * gdb.gdb/selftest.exp (do_steps_and_nexts): Add new pattern.
2016-08-05gdb/configure --help: suggest --disable-build-with-cxx instead of --enable...Pedro Alves1-1/+2
We build by default with a C++ compiler, but "configure --help" still says "--enable-build-with-cxx", which hints that it is by default disabled. Update the --help text. gdb/ChangeLog: 2016-08-05 Pedro Alves <palves@redhat.com> * build-with-cxx.m4: Change help string to be in terms of --disable-build-with-cxx. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2016-08-05 Pedro Alves <palves@redhat.com> * configure: Regenerate.
2016-07-23Implement catch syscall groupGabriel Krisman Bertazi1-0/+54
Implement support to add catchpoints for a group of related syscalls using the syntax: (gdb) catch syscall group:<group> or (gdb) catch syscall g:<group> Several groups are predefined in the xml files for all architectures supported by GDB over Linux. They are based on the groups defined by strace. gdb/ * xml-syscall.c (get_syscalls_by_group): New. (get_syscall_group_names): New. (struct syscall_group_desc): New structure to store group data. (struct syscalls_info): Include field to store the group list. (sysinfo_free_syscall_group_desc): New. (free_syscalls_info): Free group list. (syscall_group_create_syscall_group_desc): New. (syscall_group_add_syscall): New. (syscall_create_syscall_desc): Add syscall to its groups. (syscall_start_syscall): Load group attribute. (syscall_group_get_group_by_name): New. (xml_list_syscalls_by_group): New. (xml_list_of_groups): New. * xml-syscall.h (get_syscalls_by_group): Export function to retrieve a list of syscalls filtered by the group name. (get_syscall_group_names): Export function to retrieve the list of syscall groups. * break-catch-syscall.c (catch_syscall_split_args): Verify if argument is a syscall group and expand it to a list of syscalls when creating catchpoints. (catch_syscall_completer): Add word completion for system call groups. * configure.ac: Include dependency for xsltproc when building in maintainer-mode. * break-catch-syscall.c (_initialize_breakpoint): Update catch syscall command documentation. * NEWS: Include section about catching groups of syscalls. * configure: Regenerate. * data-directory/Makefile.in: Generate syscall xml when building in maintainer mode. * syscalls/gdb-syscalls.dtd: Include group attribute to the syscall element. * syscalls/apply-defaults.xsl: New. * syscalls/linux-defaults.xml.in: New. * syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in. * syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in. * syscalls/arm-linux.xml: Rename to arm-linux.xml.in. * syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in. * syscalls/i386-linux.xml: Rename to i386-linux.xml.in. * syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in. * syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in. * syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in. * syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in. * syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in. * syscalls/s390-linux.xml: Rename to s390-linux.xml.in. * syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in. * syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in. * syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in. * syscalls/aarch64-linux.xml: Regenerate. * syscalls/amd64-linux.xml: Regenerate. * syscalls/arm-linux.xml: Regenerate. * syscalls/i386-linux.xml: Regenerate. * syscalls/mips-n32-linux.xml: Regenerate. * syscalls/mips-n64-linux.xml: Regenerate. * syscalls/mips-o32-linux.xml: Regenerate. * syscalls/ppc-linux.xml: Regenerate. * syscalls/ppc64-linux.xml: Regenerate. * syscalls/s390-linux.xml: Regenerate. * syscalls/s390x-linux.xml: Regenerate. * syscalls/sparc-linux.xml: Regenerate. * syscalls/sparc64-linux.xml: Regenerate. gdb/testsuite/ * gdb.base/catch-syscall.exp (do_syscall_tests): Add call to test_catch_syscall_group. (test_catch_syscall_group): New. gdb/doc/ * gdb.texinfo (Set Catchpoints): Add 'group' argument to catch syscall.
2016-07-21Add -Wunused-but-set-* to buildTom Tromey1-1/+1
This adds -Wunused-but-set-variable and -Wunused-but-set-parameter to configure. 2016-07-21 Tom Tromey <tom@tromey.com> * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS) <build_warnings>: Add -Wunused-but-set-parameter, -Wunused-but-set-variable. 2016-07-21 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2016-07-05babeltrace compilation regressionJan Kratochvil1-1/+1
Since: commit 2d681be471cf8aff8f296cb7713c39e9aa4fc2bb Author: Andreas Arnez <arnez@linux.vnet.ibm.com> Date: Wed Apr 27 15:52:16 2016 +0200 Avoid non-C++-enabled babeltrace versions tested with: libbabeltrace-devel-1.2.4-4.fc24.x86_64 libbabeltrace-devel-1.4.0-2.fc25.x86_64 it can no longer build due to: configure:16435: gcc -o conftest -m64 -g3 -pipe -Wall -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -fno-diagno stics-show-caret -Werror -static-libstdc++ -static-libgcc conftest.c -ldl -ldl -lncurses -lm -ldl -lbabeltrace -lbabeltrace-ctf >&5 conftest.c: In function 'main': conftest.c:208:7: error: 'pos' is a pointer; did you mean to use '->'? gdb/ChangeLog 2016-07-05 Jan Kratochvil <jan.kratochvil@redhat.com> * configure: Regenerate. * configure.ac (HAVE_LIBBABELTRACE): Fix pos variable dereference.
2016-06-24Add support for catching system calls to native FreeBSD targets.John Baldwin1-0/+14
All platforms on FreeBSD use a shared system call table, so use a single XML file to describe the system calls available on each FreeBSD platform. Recent versions of FreeBSD include the identifier of the current system call when reporting a system call entry or exit event in the ptrace_lwpinfo structure obtained via PT_LWPINFO in fbsd_wait. As such, FreeBSD native targets do not use the gdbarch method to fetch the system call code. In addition, FreeBSD register sets fetched via ptrace do not include an equivalent of 'orig_rax' (on amd64 for example), so the system call code cannot be extracted from the available registers during a system call exit. However, GDB assumes that system call catch points are not supported if the gdbarch method is not present. As a workaround, FreeBSD ABIs install a dummy gdbarch method that throws an internal_error if it is ever invoked. gdb/ChangeLog: * configure.ac: Check for support for system call LWP fields on FreeBSD. * config.in, configure: Rebuild. * data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml. * fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]: Report system call events. [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE] (fbsd_set_syscall_catchpoint): New function. (fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]: Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint". * fbsd-tdep.c: Include xml-syscall.h (fbsd_get_syscall_number): New function. (fbsd_init_abi): Set XML system call file name. Add "get_syscall_number" gdbarch method. * syscalls/freebsd.xml: New file.
2016-05-23Search for libutil-freebsd as alternative to libutilJon Boden1-1/+2
GDB needs kinfo_getvmmap() on GNU/kFreeBSD systems same as on pure FreeBSD. However on these systems the FreeBSD version of libutil is renamed to libutil-freebsd. 2016-05-23 Jon Boden <jon@ubuntubsd.org> * configure.ac: Search for libutil-freebsd as alternative to libutil. * configure: Re-generated.
2016-05-17Add self-test framework to gdbTom Tromey1-0/+6
I wanted to unit test the Rust lexer, so I added a simple unit testing command to gdb. The intent is that self tests will only be compiled into gdb in development mode. In release mode they simply won't exist. So, this exposes $development to C code as GDB_SELF_TEST. In development mode, test functions are registered with the self test module. A test function is just a function that does some checks, and throws an exception on failure. Then this adds a new "maint selftest" command which invokes the test functions, and a new dejagnu test case that invokes it. 2016-05-17 Tom Tromey <tom@tromey.com> * NEWS: Add "maint selftest" entry. * selftest.h: New file. * selftest.c: New file. * maint.c: Include selftest.h. (maintenance_selftest): New function. (_initialize_maint_cmds): Add "maint selftest" command. * configure.ac (GDB_SELF_TEST): Maybe define. * config.in, configure: Rebuild. * Makefile.in (SFILES): Add selftest.c. (COMMON_OBS): Add selftest.o. 2016-05-17 Tom Tromey <tom@tromey.com> * gdb.texinfo (Maintenance Commands): Document "maint selftest". 2016-05-17 Tom Tromey <tom@tromey.com> * gdb.gdb/unittest.exp: New file.
2016-05-03Fix PR gdb/16818, workaround Python's forcing of -export-dynamicPedro Alves1-0/+14
GDB's use of --dynamic-list to only export the proc-service symbols is broken due to Python's "python-config --ldflags" saying we should link with -export-dynamic, causing us to export _all_ extern symbols anyway. On Fedora 23: $ python-config --ldflags -lpython2.7 -lpthread -ldl -lutil -lm -Xlinker -export-dynamic $ python3.4-config --ldflags -L/usr/lib64 -lpython3.4m -lpthread -ldl -lutil -lm -Xlinker -export-dynamic Having GDB export all its symbols leads to issues such as PR gdb/16818 (GDB crashes when using name for target remote hostname:port), where a GDB symbol unintentionally preempts a symbol in one of the NSS modules glibc loads into the process. NSS modules should not define symbols outside the implementation namespace or the relevant standards, but, alas, that's a longstanding and hard to fix issue. See libc-alpha discussion at: [symbol name space issues with NSS modules] https://sourceware.org/ml/libc-alpha/2016-04/msg00130.html Python should instead be either using GCC's symbol visibility feature or -Wl,--dynamic-list as well, to only export Python API symbols, but, it doesn't. There are bugs open upstream for that: [Use -Wl,--dynamic-list=x.list, not -Xlinker -export-dynamic] http://bugs.python.org/issue10112 [Use GCC visibility attrs in PyAPI_*] http://bugs.python.org/issue11410 But that's taking a long while to resolve. I thought of working around this Python issue by making GDB build with -fvisibility=hidden, as Jan suggests in Python issue 10112, as then Python's "-Xlinker -export-dynamic" has no effect. However, that would need to be done in the whole source tree (bfd, libiberty, etc.), and I think that would break GCC plugins, as I believe those have access to all of GCCs symbols, by "design". So we'd need a new configure switch, or have the libraries in the tree detect which of GCC or GDB is being built, but that doesn't work, because the answer can be "both" with combined builds... So this patch instead works around Python's bug, by simply sed'ing away "-Xlinker -export-dynamic" from the result of python-config.py --ldflags, making -Wl,--dynamic-list work again as it used to. It's ugly, but so is the bug... Note that if -Wl,--dynamic-list doesn't work, we always link with -rdynamic, so static Python should still work. Tested on F23 with --python=python (Python 2.7) and --python=python3.4. gdb/ChangeLog:y 2016-05-03 Pedro Alves <palves@redhat.com> * configure.ac (PYTHON_LIBS): Sed away "-Xlinker -export-dynamic". * configure: Regenerate.
2016-05-03Fix "-Wl,--dynamic-list" gdb/configure testPedro Alves1-1/+4
The -Wl,--dynamic-list test is currently broken on Fedora 23, when you configure with --with-python=python3.4. We see: configure:13741: checking for the dynamic export flag configure:13796: gcc -o conftest -g3 -O0 -fno-strict-aliasing -DNDEBUG -fwrapv -Wl,--dynamic-list=/home/pedro/gdb/mygit/src/gdb/proc-service.list conftest.c -ldl -lncurses -lm -ldl -lpthread -ldl -lutil -lm -lpython3.4m -Xlinker -export-dynamic >&5 conftest.c:182:30: fatal error: python3.4/Python.h: No such file or directory compilation terminated. configure:13796: $? = 1 The correct -I path is in PYTHON_CPPFLAGS: PYTHON_CPPFLAGS='-I/usr/include/python3.4m -I/usr/include/python3.4m' (Other Python-related tests in the file are already doing this.) gdb/ChangeLog: 2016-05-03 Pedro Alves <palves@redhat.com> * configure.ac (checking for the dynamic export flag): Add $PYTHON_CPPFLAGS to CPPFLAGS. * configure: Regenerate.
2016-04-27Avoid non-C++-enabled babeltrace versionsAndreas Arnez1-0/+1
In some babeltrace versions before 1.2.0, the header file iterator.h declares the enum values `BT_SEEK_*' within the struct declaration of bt_iter_pos. The enum values are supposed to be globally-scoped, which works for C, but not for C++. Later babeltrace versions declare the enum outside the struct: https://lists.lttng.org/pipermail/lttng-dev/2013-September/021411.html Now that GDB is compiled with C++, the GDB build fails on a system with an affected babeltrace version: the compiler complains about a missing declaration of BT_SEEK_BEGIN in ctf.c. This patch enhances the configure check to recognize such babeltrace versions as unusable for GDB. gdb/ChangeLog: * configure.ac: Enhance configure check for babeltrace to reject non-C++-enabled versions. * configure: Regenerate.
2016-04-20Build GDB as a C++ program by defaultPedro Alves1-1/+1
This makes --enable-build-with-cxx be "yes" by default. One must now configure with --enable-build-with-cxx=no in order to build with a C compiler. gdb/ChangeLog: 2016-04-20 Pedro Alves <palves@redhat.com> * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Default to yes. * configure: Renegerate. gdb/gdbserver/ChangeLog: 2016-04-20 Pedro Alves <palves@redhat.com> * configure: Renegerate.
generated by cgit v1.1 at 2024-11-20 06:16:28 +0000