aboutsummaryrefslogtreecommitdiff
path: root/gdb/configure
AgeCommit message (Collapse)AuthorFilesLines
2010-12-14build failure on IRIX when building with Python support.Joel Brobecker1-0/+15
This is a nasty interaction between Python and GDB. Basically, Python causes some macros to be unilaterally defined in order to turns some features on: /* Define to activate features from IEEE Stds 1003.1-2001 */ #define _POSIX_C_SOURCE 200112L /* Define to the level of X/Open that your system supports */ #define _XOPEN_SOURCE 600 But the problem is that they turn off defines provided by some system headers on which we depend. Namely: * sys/siginfo.h: #if _SGIAPI #define siginfo __siginfo #endif * sys/ucontext.h: #if _SGIAPI && !defined(__SGI_NOUCONTEXT_COMPAT) [...] #define fp_r __fp_r [...] #define fp_csr __fp_csr [...] #endif The important macro here is _SGIAPI, defined as follow in standards.h: #define _SGIAPI ((defined(_SGI_SOURCE) && \ _NO_POSIX && _NO_XOPEN4 && _NO_XOPEN5) || \ (_ANSIMODE && _NO_POSIX && _NO_XOPEN4 && _NO_XOPEN5)) If one builds GDB without Python, then _SGIAPI is true, and all is fine. But building with Python causes both _POSIX_C_SOURCE and _XOPEN_SOURCE to trip all the _NO_[...] tests (_NO_POSIX, _NO_XOPEN4, _NO_XOPEN5). And so we get build failures because we try to use undefined types, or non-existent component names inside the regset structure. The latter problem is observed only within irix5-nat.c, which means that it is specific to IRIX. So it's easy to write the code in a way that it does not require the macros (just use the real component names, rather than relying on the macros to do the translation). The former, on the other hand, is a little trickier, because the problem occurs inside a generic unit (procfs.c). The solution I chose was to adjust the configure script to add -Dsiginfo=__siginfo to the CPPFLAGS if building with python using GCC on IRIX. We hadn't seen this sort of issue up to now because the affect units have not been dependent on the python includes up to now. Recent changes have made them indirectly dependent on Python, thus triggering the issues. gdb/ChangeLog: * irix5-nat.c: Replace fp_r, fp_regs and fp_scr by __fp_r, __fp_regs and __fp_scr respectively throughout. * configure.ac: Compile with -Dsiginfo=__siginfo if building with Python using GCC on IRIX. * configure: Regenerate.
2010-11-23gdbTom Tromey1-0/+4
* configure: Rebuild. * configure.ac (READLINE_TEXI_INCFLAG): New subst. gdb/doc * gdb.texinfo (Top): Check SYSTEM_READLINE. (Editing): Likewise. (Command History): Likewise. (TUI Keys): Likewise. (Bug Reporting): Conditionally include rluser.texi and inc-history.texinfo. * Makefile.in (READLINE_TEXI_INCFLAG): New variable. (GDB_DOC_SOURCE_INCLUDES): Add comment. (GDBvn.texi): Set SYSTEM_READLINE when appropriate. (gdb.dvi): Use READLINE_TEXI_INCFLAG. (gdb.pdf): Likewise. (gdb.info): Likewise. (gdb/index.html): Likewise.
2010-11-23gdbTom Tromey1-3/+4
* Makefile.in (SUBDIRS): Add doc. * configure: Rebuild. * configure.ac: Don't configure in doc. Create doc/Makefile. gdb/doc * Makefile.in (Makefile): Run ../config.status. (distclean): Update. * configure: Remove. * configure.ac: Remove.
2010-11-05gdb/Jan Kratochvil1-0/+8
Fix configure --enable-plugins --without-python. * configure.ac (for ELF support in BFD) <"$plugins" = "yes">: New. * configure: Regenerate.
2010-10-06 Create subdir data-directory.Doug Evans1-1/+2
* Makefile.in (XML_SYSCALL_DIR, XML_SYSCALL_FILES): Moved to data-directory/Makefile.in. (SUBDIRS): Add data-directory. (all): Remove xml-syscall-copy dependency. (xml-syscall-copy): Moved to data-directory/Makefile.in as stamp-syscalls. (xml-syscall-install): Moved to data-directory/Makefile.in as install-syscalls. (install-only): Remove xml-syscall-install dependency. (all-data-directory): New rule. (data-directory/Makefile): New rule. * configure.ac (AC_OUTPUT): Add data-directory/Makefile. * configure: Regenerate. * data-directory/Makefile.in: New file. * python/lib/gdb/__init__.py: New file. testsuite/ * gdb.base/catch-syscall.exp (do_syscall_tests): Update location of syscall staging area.
2010-09-22Allow disabling of gdbserver build (--enable-gdbserver=yes/no/auto).Joel Brobecker1-2/+24
This patch adds a new --enable-gdbserver=yes/no/auto command-line switch in gdb/configure. The primary purpose is to allow a user to disable the build & install of gdbserver when not desired. It also allows the user to request gdbserver in which case the configure script will abort if automatic building of gdbserver is not supported for that configuration. The default keeps things as is: We automatically build gdbserver if building for a native configuration and if gdbserver is supported for that configuration. gdb/ChangeLog: * configure.ac: Add support for --enable-gdbserver. * configure: Regenerate. At AdaCore, this is mostly intended for ia64-linux, where we currently do not want to distribute gdbserver. This will be useful in the context of I417-033, where we are now using "make install" to determine what needs to be packaged inside the GNAT Pro package.
2010-09-02 * config.in, configure: Regenerated.Daniel Jacobowitz1-1/+1
* configure.ac: Check for waitpid. * ser-pipe.c (pipe_close): Wait for the program to exit.
2010-08-18 PR python/11900:Tom Tromey1-0/+1
* configure: Rebuild. * configure.ac: Add install-python to CONFIG_INSTALL. * Makefile.in (install-python): New.
2010-07-30 * configure: Rebuild.Tom Tromey1-0/+37
* configure.ac: Add missing case for Python 2.7.
2010-07-282010-07-28 Pedro Alves <pedro@codesourcery.com>Pedro Alves1-1/+1
PR build/11848 * configure.ac: Check for wresize. * configure, config.in: Regenerate. * tui/tui-win.c (make_visible_with_new_height): Wrap wresize call with HAVE_WRESIZE.
2010-07-28 * configure.ac: Check for resize_term.Pedro Alves1-1/+1
* configure, config.in: Regenerate.
2010-07-06 * configure, config.in: Rebuild.Tom Tromey1-1/+5
* configure.ac (HAVE_LIBPYTHON2_7): New define. * python/python-internal.h: Handle HAVE_LIBPYTHON2_7.
2010-06-23gdb/Jan Kratochvil1-56/+34
* configure.ac: Always set RDYNAMIC at least as `-rdynamic'. * configure: Regenerate.
2010-06-15* configure.ac: Check for RDYNAMIC also for cross builds.Andreas Schwab1-3/+4
* configure: Regenerate.
2010-06-08gdb/Jan Kratochvil1-11/+50
* configure.ac <"${have_libpython}" != no>: New workaround of python#4434. * configure: Regenerate. gdb/testsuite/ * gdb.python/python.exp (pythonX.Y/lib-dynload/*.so): New.
2010-06-03 * configure.ac: Don't fail if python is unusable whenDoug Evans1-11/+28
configured with --with-python=auto. * configure: Regenerate.
2010-05-28gdb/Jan Kratochvil1-32/+58
* Makefile.in (RDYNAMIC): New. (SFILES): Add proc-service.list. * config/alpha/alpha-linux.mh (NAT_CDEPS): New. (LOADLIBES): Replace -rdynamic by $(RDYNAMIC). * config/arm/linux.mh: Likewise. * config/i386/linux.mh: Likewise. * config/i386/linux64.mh: Likewise. * config/ia64/linux.mh: Likewise. * config/m32r/linux.mh: Likewise. * config/m68k/linux.mh: Likewise. * config/mips/linux.mh: Likewise. * config/pa/linux.mh: Likewise. * config/powerpc/linux.mh: Likewise. * config/powerpc/ppc64-linux.mh: Likewise. * config/s390/s390.mh: Likewise. * config/sparc/linux.mh: Likewise. * config/sparc/linux64.mh: Likewise. * config/xtensa/linux.mh: Likewise. * configure.ac: New RDYNAMIC on native host and GCC. (solaris*): Replace -Wl,-export-dynamic by $RDYNAMIC. * configure: Regenerate. * proc-service.list: New. gdb/gdbserver/ * Makefile.in (SFILES): Add $(srcdir)/proc-service.list. (CDEPS): New. * configure.ac (RDYNAMIC): New AC_MSG_CHECKING wrapping. Test also -Wl,--dynamic-list. * configure: Regenerate. * proc-service.list: New.
2010-05-27 Allow python to find its files if moved from original location.Doug Evans1-9/+56
* acinclude.m4 (GDB_AC_DEFINE_RELOCATABLE): New function. (GDB_AC_WITH_DIR): Call it. * configure.ac: Define WITH_PYTHON_PATH if we can find the python installation directory. * config.in: Regenerate. * configure: Regenerate. * defs.h (python_libdir): Declare. * main.c (python_libdir): Define. (captured_main): Initialize python_libdir. * python/python.c (_initialize_python): #ifdef WITH_PYTHON_PATH, call Py_SetProgramName to make sure python can find its libraries and modules.
2010-05-27 * configure.ac: Try to use python's distutils to fetch compilationDoug Evans1-54/+261
parameters. * configure: Regenerate. * python/python-config.py: New file.
2010-05-23gdb/Pedro Alves1-380/+1379
2010-05-23 Pedro Alves <pedro@codesourcery.com> Update gnulib from latest git. (250b80067c1e1d8faa0c42fb572f721975b929c5) * gnulib/memcmp.c: Removed. * gnulib/memchr.valgrind: New. * gnulib/stddef.in.h: New. * gnulib/Makefile.am: Updated. * gnulib/memchr.c: Updated. * gnulib/memmem.c: Updated. * gnulib/stdint.in.h: Updated. * gnulib/str-two-way.h: Updated. * gnulib/string.in.h: Updated. * gnulib/wchar.in.h: Updated. * gnulib/extra/link-warning.h: Removed. * gnulib/extra/c++defs.h: New. * gnulib/extra/warn-on-use.h: New. * gnulib/extra/arg-nonnull.h: Updated. * gnulib/m4/extensions.m4: Updated. * gnulib/m4/gnulib-cache.m4: Updated. * gnulib/m4/gnulib-common.m4: Updated. * gnulib/m4/gnulib-comp.m4: Updated. * gnulib/m4/gnulib-tool.m4: Updated. * gnulib/m4/include_next.m4: Updated. * gnulib/m4/longlong.m4: Updated. * gnulib/m4/memchr.m4: Updated. * gnulib/m4/memmem.m4: Updated. * gnulib/m4/stdint.m4: Updated. * gnulib/m4/string_h.m4: Updated. * gnulib/m4/memcmp.m4: Removed. * gnulib/m4/onceonly_2_57.m4: Removed. * gnulib/m4/00gnulib.m4: New. * gnulib/m4/mmap-anon.m4: New. * gnulib/m4/multiarch.m4: New. * gnulib/m4/onceonly.m4: New. * gnulib/m4/stddef_h.m4: New. * gnulib/m4/warn-on-use.m4: New. * gnulib/m4/wchar.m4: Removed. * gnulib/m4/wchar_h.m4: New. * gnulib/m4/wchar_t.m4: New. * gnulib/m4/wint_t.m4: New. * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. * gnulib/Makefile.in: Likewise. gdb/gdbserver/ 2010-05-23 Pedro Alves <pedro@codesourcery.com> * config.h, configure: Regenerate.
2010-04-23 * configure.ac (CONFIG_SRCS): Add py-auto-load.o even if not usingDoug Evans1-3/+4
python. * configure: Regenerate. * main.c: #include "python/python.h". (captured_main): Defer loading auto-loaded scripts until after local_gdbinit has been sourced. * python/py-auto-load.c (gdbpy_global_auto_load): New global. (load_auto_scripts_for_objfile): New function. (auto_load_new_objfile): Call it. * python/python.h (gdbpy_global_auto_load): Declare. (load_auto_scripts_for_objfile): Declare.
2010-03-15Fail gdb configure if target is not supported.Joel Brobecker1-0/+4
* configure.ac: Exit if ${gdb_target_obs}" is not set. * configure: Regenerate.
2010-03-10 * elfread.c (elf_symfile_read): Don't callTom Tromey1-1/+1
dwarf2_build_frame_info. * dwarf2read.c (struct dwarf2_section_info) <readin>: New field. (struct dwarf2_per_objfile) <objfile>: New field. (dwarf2_has_info): Now idempotent. Set objfile field. (dwarf2_read_section): Check and set readin field. Call posix_madvise. (dwarf2_build_psymtabs): Don't read all sections. (read_type_comp_unit_head): Read types section. (create_debug_types_hash_table): Likewise. (init_cu_die_reader): Add asserts. (process_type_comp_unit): Add assert. (dwarf2_build_psymtabs_hard): Read info section. (load_partial_comp_unit): Add assert. (create_all_comp_units): Read info section. (load_full_comp_unit): Likewise. (dwarf2_ranges_read): Read ranges section. (dwarf2_record_block_ranges): Add assert. (dwarf2_read_abbrevs): Read abbrev section. (read_indirect_string): Read str section. (dwarf_decode_line_header): Read line section. (read_signatured_type_at_offset): Read types section. (dwarf_decode_macros): Read macinfo section. (dwarf2_symbol_mark_computed): Read loc section. * dwarf2-frame.c (dwarf2_frame_find_fde): Call dwarf2_build_frame_info. (dwarf2_build_frame_info): Unconditionally set dwarf2_frame_objfile_data on the objfile. * configure.ac: Check for posix_madvise. * config.in, configure: Rebuild.
2010-01-25 * configure.ac: Only use host_os part when disabling TUI on osf.Rainer Orth1-3/+3
Use test to check variables, prefix strings with x. * configure: Regenerate. * solib-osf.c (osf_current_sos): Initialize tail.
2010-01-19Add -Wunused-function to compile flags.Joel Brobecker1-1/+2
* configure.ac: Add -Wunused-function to build_warnings. * configure: Regenerate.
2010-01-15gdb/Jan Kratochvil1-1/+2
* configure.ac (AC_CHECK_FUNCS): Check for setrlimit and getrlimit. * configure: Regenerate. * config.in: Regenerate. * utils.c: Include sys/resource.h. (dump_core, can_dump_core): New. (internal_vproblem): Update the comment. Check can_dump_core while setting dump_core_p. Replace two abort calls by dump_core calls.
2010-01-12gdb/Jan Kratochvil1-0/+28
* configure: Regenerate (for _STRUCTURED_PROC).
2010-01-08 Cannot find in-tree libiconv.a after reconfigure.Joel Brobecker1-2/+3
* acinclude.m4 (AM_ICONV): If we find an in-tree libiconv.a that we can use, then cache the path to this archive. * configure: Regenerate.
2009-12-09 * acinclude.m4: Link against in-tree libiconv by addingJoel Brobecker1-13/+20
libiconv.a to the LIBS instead of using -liconv. * configure: Regenerate.
2009-11-30config:Joseph Myers1-110/+138
* largefile.m4 (ACX_LARGEFILE): Require AC_CANONICAL_HOST and AC_CANONICAL_TARGET. bfd: * configure: Regenerate. binutils: * configure: Regenerate. gas: * configure: Regenerate. gdb: * configure: Regenerate. gprof: * configure: Regenerate. ld: * configure: Regenerate.
2009-11-24 * acinclude.m4: Include ../config/zlib.m4.Joel Brobecker1-1/+20
* configure.ac: Use AM_ZLIB to check for zlib support. * configure: Regenerate.
2009-11-11bfd/Jan Kratochvil1-0/+234
* configure.in: Call ACX_LARGEFILE. Stop calling AC_PLUGINS, AC_SYS_LARGEFILE and checking the Solaris largefile exception. * aclocal.m4: Regenerate. * configure: Regenerate. binutils/ * configure.in: Call ACX_LARGEFILE. Stop calling AC_PLUGINS, AC_SYS_LARGEFILE and checking the Solaris largefile exception. * aclocal.m4: Regenerate. * configure: Regenerate. gas/ * configure.in: Call ACX_LARGEFILE. Stop calling AC_SYS_LARGEFILE. * aclocal.m4: Regenerate. * configure: Regenerate. gdb/ * configure.ac: Call ACX_LARGEFILE. * aclocal.m4: Call m4_include for ../config/largefile.m4 and ../config/plugins.m4. * configure: Regenerate. * config.in: Regenerate. gprof/ * configure.in: Call ACX_LARGEFILE. Stop calling AC_SYS_LARGEFILE. * aclocal.m4: Regenerate. * configure: Regenerate. ld/ * configure.in: Call ACX_LARGEFILE. Stop calling AC_SYS_LARGEFILE. * aclocal.m4: Regenerate. * configure: Regenerate.
2009-10-14 gdb/Pedro Alves1-1/+1
* configure.ac (build_warnings): Add -Wunused-value. * configure: Regenerate.
2009-10-02gdb/Jan Kratochvil1-0/+33
Fix compatibility of --with-system-readline and readline-6.0+. * configure.ac <--with-system-readline> (for readline_echoing_p): New test. * config.in: Regenerate. * configure: Regenerate.
2009-09-10 * configure.ac: Fix the names of the python source and object filesJoel Brobecker1-2/+2
following the renaming done in an earlier change. * configure: Regenerate.
2009-08-22Cleanups after the update to Autoconf 2.64, Automake 1.11.Ralf Wildenhues1-50/+0
/: * README-maintainer-mode: Point directly to upstream locations for autoconf, automake, libtool, gettext, instead of copies on sources.redhat.com. Document required versions. * configure.ac: Do not substitute datarootdir, htmldir, pdfdir, docdir. Do not process --with-datarootdir, --with-htmldir, --with-pdfdir, --with-docdir. * configure: Regenerate. gdb/: * CONTRIBUTE: Bump documented Autoconf version. * configure.ac: Do not substitute datarootdir, htmldir, pdfdir, docdir. Do not process --with-datarootdir, --with-htmldir, --with-pdfdir, --with-docdir. * configure: Regenerate. gdb/doc/: * gdbint.texinfo (Releasing GDB): Point to README-maintainer-mode file for required autoconf version. * configure.ac: Do not substitute datarootdir, htmldir, pdfdir, docdir. Do not process --with-datarootdir, --with-htmldir, --with-pdfdir, --with-docdir. * configure: Regenerate. gprof/: * Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am) (install-pdf-recursive, html__strip_dir, install-html) (install-html-am, install-html-recursive): Remove. * Makefile.in: Regenerate. opcodes/: * Makefile.am (install-pdf, install-html): Remove. * Makefile.in: Regenerate. gas/: * Makefile.am (install-pdf, install-pdf-recursive, install-html) (install-html-recursive): Remove. * Makefile.in: Regenerate. * doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am) (html__strip_dir, install-html, install-html-am): Remove. * doc/Makefile.in: Regenerate. ld/: * Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am) (install-pdf-recursive, html__strip_dir, install-html) (install-html-am, install-html-recursive): Remove. * Makefile.in: Regenerate. binutils/: * Makefile.am (install-pdf, install-pdf-recursive, install-html) (install-html-recursive): Remove. * Makefile.in: Regenerate. * doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am) (html__strip_dir, install-html, install-html-am): Remove. * doc/Makefile.in: Regenerate. bfd/: * Makefile.am (datarootdir, docdir, htmldor, pdfdir) (install-pdf, install-pdf-recursive, install-html) (install-html-recursive): Remove. * Makefile.in: Regenerate. bfd/doc/: * Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am) (html__strip_dir, install-html, install-html-am): Remove. * Makefile.in: Regenerate.
2009-08-22Regenerate tree using Autoconf 2.64 and Automake 1.11.Ralf Wildenhues1-14044/+6643
config/: * override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64. /: * configure: Regenerate. etc/: * configure: Regenerate. sim/common/: * config.in: Regenerate. * configure: Likewise. sim/iq2000/: * config.in: Regenerate. * configure: Likewise. sim/d10v/: * config.in: Regenerate. * configure: Likewise. sim/igen/: * config.in: Regenerate. * configure: Likewise. sim/m32r/: * config.in: Regenerate. * configure: Likewise. sim/frv/: * config.in: Regenerate. * configure: Likewise. sim/: * avr/config.in: Regenerate. * avr/configure: Likewise. * configure: Likewise. * cris/config.in: Likewise. * cris/configure: Likewise. sim/h8300/: * config.in: Regenerate. * configure: Likewise. sim/mn10300/: * config.in: Regenerate. * configure: Likewise. sim/ppc/: * config.in: Regenerate. * configure: Likewise. sim/erc32/: * config.in: Regenerate. * configure: Likewise. sim/arm/: * config.in: Regenerate. * configure: Likewise. sim/m68hc11/: * config.in: Regenerate. * configure: Likewise. sim/lm32/: * config.in: Regenerate. * configure: Likewise. sim/sh64/: * config.in: Regenerate. * configure: Likewise. sim/v850/: * config.in: Regenerate. * configure: Likewise. sim/cr16/: * config.in: Regenerate. * configure: Likewise. sim/moxie/: * config.in: Regenerate. * configure: Likewise. sim/m32c/: * config.in: Regenerate. * configure: Likewise. sim/mips/: * config.in: Regenerate. * configure: Likewise. sim/mcore/: * config.in: Regenerate. * configure: Likewise. sim/testsuite/d10v-elf/: * configure: Regenerate. sim/testsuite/: * configure: Regenerate. sim/testsuite/frv-elf/: * configure: Regenerate. sim/testsuite/m32r-elf/: * configure: Regenerate. sim/testsuite/mips64el-elf/: * configure: Regenerate. sim/sh/: * config.in: Regenerate. * configure: Likewise. gold/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * testsuite/Makefile.in: Likewise. gprof/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. * gconfig.in: Likewise. opcodes/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gas/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. ld/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gdb/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. * gnulib/Makefile.in: Likewise. gdb/doc/: * configure: Regenerate. gdb/gdbserver/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. gdb/testsuite/: * configure: Regenerate. * gdb.hp/configure: Likewise. * gdb.hp/gdb.aCC/configure: Likewise. * gdb.hp/gdb.base-hp/configure: Likewise. * gdb.hp/gdb.compat/configure: Likewise. * gdb.hp/gdb.defects/configure: Likewise. * gdb.hp/gdb.objdbg/configure: Likewise. * gdb.stabs/configure: Likewise. binutils/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. bfd/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. bfd/doc/: * Makefile.in: Regenerate. readline/: * configure: Regenerate. readline/examples/rlfe/: * configure: Regenerate.
2009-07-30intl/Ralf Wildenhues1-0/+1
* Makefile.in (aclocal_deps): New variable. ($(srcdir)/aclocal.m4): Use it, for portable makefile syntax. libdecnumber/ * Makefile.in (aclocal_deps): New variable. ($(srcdir)/aclocal.m4): Use it, for portable makefile syntax. etc/ * Makefile.in (AUTOCONF, configure_deps): New variables. ($(srcdir)/configure, config.status): New rules. (Makefile): Depend on config.status. * configure.in: Accept --enable-maintainer-mode, set and substitute MAINT accordingly. gdb/ * Makefile.in (ACLOCAL, ACLOCAL_AMFLAGS, aclocal_m4_deps) (AUTOCONF, configure_deps, AUTOHEADER): New variables. ($(srcdir)/aclocal.m4, $(srcdir)/configure, $(srcdir)/config.in) (am--refresh): New rules. (stamp-h, config.status): List config.in and configure including $(srcdir)/ prefix. * aclocal.m4: Regenerate. * configure: Regenerate.
2009-07-20fix gdbtui build errors when pipe() is not available (e.g. mingw targets)Mike Frysinger1-1/+1
* configure.ac (AC_CHECK_FUNCS): Check for pipe. * config.in, configure: Regenerate. * tui/tui-io.c (TUI_USE_PIPE_FOR_READLINE): Define if HAVE_PIPE.
2009-05-282009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>Paul Pluzhnikov1-2/+2
Paul Pluzhnikov <ppluzhnikov@google.com> * configure.ac (!have_libpython): Add python-prettyprint source and object files. * configure: Regenerate. * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before python headers.
2009-05-06 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present overJoel Brobecker1-25/+29
system iconv. * configure: Regenerate.
2009-04-23gdbTom Tromey1-45/+103
2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com> Tom Tromey <tromey@redhat.com> * configure, config.in: Regenerate. * configure.ac: Support for relocatable GDB datadir. Use GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE. * acinclude.m4 (GDB_AC_WITH_DIR): New defun. * top.c (init_main): Add "set data-directory". * defs.h (gdb_datadir): Declare. * main.c (gdb_datadir): New global. (captured_main): Initialize gdb_datadir. Use relocate_directory. (relocate_path): New function. (relocate_directory): Likewise. (get_init_files): Use relocate_path. (README): Mention --with-gdb-datadir. gdb/doc 2009-04-23 Tom Tromey <tromey@redhat.com> * gdb.texinfo (Data Files): New node. (GDB Files): Update menu.
2009-04-21* configure.ac: Add quotes to not lose brackets in help text.Andreas Schwab1-1/+1
* configure: Rebuild.
2009-04-21 * configure.ac: Don't postprocess Makefile in config.status.Andreas Schwab1-13/+2
Substitute GDB_NM_FILE. Don't substitute nm_h. * Makefile.in (GDB_NM_FILE): Substitute. (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE). * configure: Regenerate. * gnulib/Makefile.in: Regenerate.
2009-04-21gdb:Joseph Myers1-0/+41
* configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir, --with-htmldir): New. * configure: Regenerate. gdb/doc: * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir, --with-htmldir): New. * configure: Regenerate. * Makefile.in (datarootdir, docdir): Define. (gdb.dvi, gdb.pdf): Use same -I options as for building gdb.info instead of $(SET_TEXINPUTS). (gdbint.dvi, gdbint.pdf): Use same -I options as for building gdbint.info instead of $(SET_TEXINPUTS). (gdbint/index.html): Use same -I options as for building gdbint.info. (stabs.dvi, stabs.pdf): Use same -I options as for building stabs.info instead of $(SET_TEXINPUTS). (stabs/index.html): Use same -I options as for building stabs.info. (annotate.dvi, annotate.pdf): Use same -I options as for building annotate.info instead of $(SET_TEXINPUTS). (annotate/index.html): Use same -I options as for building annotate.info.
2009-04-21 * configure: Rebuild.Tom Tromey1-8/+9
* configure.ac: Use lower case for start of help strings. Clean up --with-sysroot help.
2009-04-21 * configure: Rebuild.Tom Tromey1-11/+19
* acinclude.m4 (AM_ICONV): Use AC_HELP_STRING. * configure.ac: Use AC_HELP_STRING. Use upper case for variables in help.
2009-04-21gdb:Joseph Myers1-0/+21
* configure.ac (--with-relocated-sources): New. * configure, config.in: Regenerate. * source.c (add_substitute_path_rule): Remove static. * source.h (add_substitute_path_rule): Declare. * main.c: Include "source.h". (captured_main): Add substitution rule if RELOC_SRCDIR. gdb/doc: * gdb.texinfo (Source Path): Document --with-relocated-sources.
2009-04-17gdb:Joseph Myers1-1/+10
2009-04-17 Carlos O'Donell <carlos@codesourcery.com> * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir. * configure: Regenerate. * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from configure substitutions. (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir. gdb/doc: 2009-04-17 Carlos O'Donell <carlos@codesourcery.com> * Makefile.in: Set pdfdir and htmldir from configure substitutions. * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir. * configure: Regenerate. readline: 2009-04-17 Carlos O'Donell <carlos@codesourcery.com> * Makefile.in: Add html target. Add dummy install-html and install-pdf targets. sim: 2009-04-17 Carlos O'Donell <carlos@codesourcery.com> * Makefile.in: Add dummy install-pdf, html, and install-html targets.
2009-04-15gdbTom Tromey1-1/+2
* c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING. (c_printstr): Likewise. * charset.c: Include gdb_wait.h. (make_wchar_iterator): Use INTERMEDIATE_ENCODING. (find_charset_names): Use pexecute. Handle libiconv's output. Detect errors. (_initialize_charset): Use xstrdup. * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar cases. (INTERMEDIATE_ENCODING): New define. * configure, config.in: Rebuild. * configure.ac: Check for btowc. gdb/doc * gdb.texinfo (Character Sets): Document default character set.
generated by cgit v1.1 at 2025-01-07 13:46:41 +0000