Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
* configure: Rebuild.
|
|
* configure.in: Change required Tix version to 4.1.8.0 .
* configure: Rebuilt.
|
|
* Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
sub makes, change clean rule to also remove *.a to remove
libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
remove remote-wiggler.o
* configure.in: add DLLTOOL support
* configure: regenerate
* wigglers.def: new file for imports for wigglers.dll
* ser-ocd.c: new file which is layer between ocd.c and either the
wigglers.dll or the target box, only stub so far
* config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
* config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
* config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
to XDEPFILES, add rules to build libwigglers.a
checking in changes of Stu Grossman <grossman@cygnus.com>:
* remote-wiggler.c: delete
* ocd.c: new, was remote-wiggler.c
always include sys/types.h, include ocd.h, move WIGGLER
commands and many wiggler prototypes to ocd.h, make wiggler_desc
static, stop making local wiggler functions static,
define write_mem_command for wiggler_write_bytes
(wiggler_start_remote): stop hardcoding the target type,
instead set and use a target_type variable.
(wiggler_open): add new target_type and ops args
(wiggler_wait): now no longer takes pid and target_status as args,
stop trying to set target_status struct, remove BGND insn
checks
(read_bdm_registers): renamed to wiggler_read_bdm_registers
(wiggler_read_bdm_registers): numregs arg changed to reglen arg,
remove pktlen check, set reglen instead of numregs
(dump_all_bdm_regs): delete
(wiggler_fetch_registers): delete
(wiggler_prepare_to_store): now just an empty function
(wiggler_store_registers): delete
(wiggler_read_bdm_register): new
(wiggler_write_bdm_registers): new
(wiggler_write_bdm_register): new
(wiggler_write_bytes): use write_mem_command variable instead of
WIGGLER_WRITE_MEM
(get_packet): renamed to wiggler_get_packet, change refs throughout
(put_packet): renamed to wiggler_put_packet, change refs throughout
(wiggler_get_packet): add break to default case of switch,
change length of WIGGLER_GET_VERSION len to 10 from 4 to match
specs
(wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
(flash_xfer_memory): delete
(noop_store_registers): new placeholder replacement for
target_store_registers() which prevents generic_load from trying to
set up the PC.
(bdm_update_flash_command): add store_registers_tmp variable,
make handling of wiggler_ops more generic -- define wiggler_ops
in a target-specific file instead (such as ppc-bdm.c in the case
of the ppc), use current_target to deal with registers again
making this file less target-specific.
(bdm_read_register_command): new
(_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
comment out add_cmd ("read-register", ...)
* ocd.h: new, contains common wiggler prototypes, command definitions
* ppc-bdm.c: file for ppc-specific OCD code, including target_ops
structure for ppc bdm
(bdm_ppc_open): new
(bdm_ppc_wait): new
(bdm_ppc_fetch_registers): new
(bdm_ppc_store_registers_: new
(_initialize_bdm_ppc): new
* config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
|
|
_WIN32.
(Tcl_Realloc, Tcl_Free): Likewise.
* configure.in: Check for cygwin32 environment. Define and
substitute WIN32LIBS and WIN32LDAPP. Always set configdir to
unix; setting it to win was for an old Tcl/Tk configuration
scheme.
* aclocal.m4 (CY_AC_LOAD_TKCONFIG): Substitute TK_BUILD_INCLUDES.
* Makefile.in (TK_CFLAGS): Add @TK_BUILD_INCLUDES@.
(WIN32LDAPP, WIN32LIBS): Define.
(CLIBS): Add $(WIN32LIBS).
(gdb): Use $(WIN32LDAPP).
* configure: Rebuild.
|
|
* configure.in, aclocal.m4: Another fix to find the
correct Tix library name.
* configure: Rebuilt.
|
|
* configure: Rebuilt.
|
|
* Makefile.in, configure.in, aclocal.m4: Add Itcl, Tix, and
IDE configuration information.
* gdbtk.c (breakpoint_notify): Send address, linenumber and
filename when a breakpoint is set. Avoids call to bp_info.
(gdbtk_init): Call Tcl_FindExecutable(). Add code to handle
Itcl, Tix and IDE initialization.
* defs.h (init_ui_hook): Change prototype to accept one arg.
* main.c (gdb_init): Change prototype to accept one arg.
* top.c (gdb_init): Accepts one argument which it uses to
call (*init_ui_hook), which will be gdbtk_init(). This is
used for calling Tcl_FindExecutable().
* gdbtcl/breakpoint.tcl (gdbtk_tcl_breakpoint): Change to
accept variable number of args for compatibility with
cchanges in gdbtk.c.
* configure: Regenerated.
* gdbtcl/tclIndex: Regenerated.
|
|
|
|
of gdbtk.tcl.
|
|
* .gdbinit: Remove.
* configure.in: Generate .gdbinit from gdbinit.in.
* configure: Rebuild.
|
|
configured in
|
|
* Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
* gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
to GDBTK_LIBRARY, which is now a path to search.
(gdb_path_conv): New function. Convert Cygwin32 pathname to
DOS-style pathname.
* aclocal.m4, configure.in: Changes for Windows builds.
* configure: Rebuilt.
|
|
* configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
|
|
* configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
* config.in: Regenerated.
* acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
HAVE_HPUX_THREAD_SUPPORT): Define.
* gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
TCL_ALL_EVENTS.
* configure: Regenerated.
* configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
LIBS.
|
|
* configure, configure.in: Allow gdbserver to be configured
for cross-target environments.
* gdbserver/Makefile.in: Add simulator support.
* gdbserver/configure.in: Eliminate assumption that host == target.
Simplify using gdb/configure.tgt and gdb/configure.host.
Fix other minor configuration errors.
* gdbserver/low-sparc.c: Fix compile error.
* gdbserver/remote-utils.c: Eliminate assumption that registers
and addresses are four bytes. Fix minor compile errors and warnings.
* gdbserver/server.c: Rewrite numerous instances of identical code
for starting inferior processes to call new function start_inferior.
Eliminate assumption that registers and addresses are four bytes.
* gdbserver/server.h: Add missing prototypes to eliminate compiler
warnings.
* gdbserver/low-sim.c: New file to mate gdbserver with simulators.
* config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
* config/i386/linux.mh: Eliminate gdbserver support as a first step
in moving such support from host to target makefile fragments.
* config/i386/linux.mt: Move gdbserver support here from linux.mh.
|
|
only when running GCC, since HP's thread header files use ANSI C
which is not supported by their default compiler.
|
|
support for WinGDB. Add mswin to configdirs.
* configure.in configure: Move calls to configure.host and
configure.tgt to the top of configure.in to allow them to set
config variables before they are referenced.
|
|
Solaris threads.
|
|
are using gcc when using the -export-dynamic option. Fixes a
problem with building under Solaris/SunPro cc.
|
|
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
|
|
* config.in, configure.in, configure: Check for <objlist.h>.
* configure.tgt: Handle mips*-sgi-irix6* like irix5 for now.
* cp-valprint.c (cp_print_value_fields): Use SYMBOL_VALUE_ADDRESS
instead of SYMBOL_BLOCK_VALUE to get the address of a static member.
* dwarf2read.c: Turn warnings and recoverable errors into complaints,
add new complaints where appropriate.
gcc -Wall cleanup.
(struct line_head): Change line_base from char to int to avoid
problems with compilers whose plain char is represented by an
unsigned char.
(struct partial_die_info): Add is_declaration field.
(dwarf2_tmp_obstack): New obstack for allocating temporary storage
used during symbol reading.
(cu_header_offset): New variable for resolving relative reference
dies.
(optimized_out, basereg, islocal, frame_base_reg, frame_base_offset):
New interface variables for decode_locdesc.
(struct dwarf2_pinfo): New structure for communication between
psymtab and symtab reading, passed via pst->read_symtab_private.
(dwarf2_has_info, dwarf2_build_psymtabs): Accept objects files
without line number sections.
(dwarf2_build_psymtabs_hard): Initialize temporary obstack
for symbol reading.
Allocate and initialize pst->read_symtab_private.
Relocate pst->textlow and pst->texthigh with baseaddr.
(scan_partial_symbols): Do not add DW_AT_declaration symbols
to the partial symbol table.
Add file scope enumerator symbols to the partial symbol table.
Fix typo in highpc computation.
If we didn't find a lowpc, set it to highpc to avoid complaints
from `maint check.
(add_partial_symbol): Relocate symbol values with baseaddr.
Add static DW_TAG_subprogram and DW_TAG_variable symbols to the
minimal symbol table.
Obtain symbol values for DW_TAG_variable symbols from the location
descriptor, skip symbols with missing location desciptors.
Skip symbols for aggregate types without children.
Handle enumerator symbols.
(dwarf2_psymtab_to_symtab): Issue symbol reading message if verbose.
(psymtab_to_symtab_1): Set local variables from
pst->read_symtab_private, set cu_header_offset and baseaddr.
Initialize temporary obstack for symbol reading, initialize
buildsym and add a cleanup to really_free_pendings.
Relocate highpc with baseaddr when calling end_symtab.
If the compilation is from a C file generated by language
preprocessors, do not set the symtab language if it was already
deduced by start_subfile.
Removed verbose sorting symbol table message.
(process_die): Handle DW_TAG_ptr_to_member_type and
DW_TAG_reference_type.
Use read_subroutine_type to get the function type for
DW_TAG_subprogram before calling read_func_scope.
(read_file_scope): Initialize file name to <unknown>, start_subfile
expects a non-NULL name.
If we didn't find a lowpc, set it to highpc to avoid complaints
from finish_symbol.
Relocate lowpc and highpc with baseaddr.
Get rid of Irix6.2 native cc compile machine prefix in comp_dir.
Zero out ftypes for each new compilation unit (may be different
language or different objfile).
Accept compilation units without line number information, pass
comp_dir to decode_lines.
(read_func_scope): Initialize function name to <unknown> to avoid
core dumps when DW_AT_name is missing.
Relocate lowpc and highpc with baseaddr.
Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations.
Pass function type to new_symbol.
(read_lexical_block_scope): Relocate lowpc and highpc with baseaddr.
(read_structure_scope): Set TYPE_TAG_NAME, not TYPE_NAME.
Handle DW_TAG_class_type.
Copy fields to type_obstack, release temporary storage for fields.
Don't add symbol if die is a stub die and has no children.
Handle C++ static member fields.
(read_enumeration): Set TYPE_TAG_NAME, not TYPE_NAME.
Copy fields to type_obstack, release temporary storage for fields.
Let new_symbol handle the symbol creation for enumerators
instead of handcrafting a symbol.
Determine signedness of enum type from enumerators.
(dwarf_read_array_type): Handle variable length arrays.
Use lookup_pointer_type instead of handcrafting a type.
Create array type only if a DW_TAG_subrange_type was found.
(read_tag_pointer_type, read_tag_reference_type):
Use lookup_pointer_type and lookup_reference_type instead
of handcrafting a type.
(read_tag_ptr_to_member_type): New function to handle
DW_TAG_ptr_to_member_type.
(read_subroutine_type): Handle parameter dies.
Use lookup_function_type instead of handcrafting a type.
(read_typedef): Allocate a TYPE_CODE_TYPEDEF type for the typedef.
(read_base_type): If the type has a name, use init_type to create
a new type instead of second guessing a fundamental type.
(read_comp_unit): Reset die reference table before building
a new one.
(dwarf2_read_section): Read section contents into psymbol_obstack.
(dwarf2_read_abbrevs): Handle unterminated abbreviations
for a compile unit gracefully.
(read_partial_die): Zero partial die before reading its info.
Handle DW_AT_declaration.
Fix typo in handling of DW_FORM_block4.
(read_full_die): Fix typo in handling of DW_FORM_block4.
(read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes):
New routines to get signed values from a buffer.
(read_n_bytes, read_string): Allocate storage from the temporary
obstack. If the host char size permits it, return pointer
to buffer instead of allocating storage.
(set_cu_language): Handle DW_LANG_Mips_Assembler.
(dwarf_attr): Return NULL if reference die for DW_AT_specification
or DW_AT_abstract_origin die is not found.
(record_minimal_symbol): Removed, replaced with a direct call to
prim_record_minimal_symbol, it now handles saving the string itself.
(convert_locdesc): Removed, partial symtab reading now uses
decode_locdesc.
(dwarf_attr): Use dwarf2_get_ref_die_offset to get the absolute
offset for the die reference.
(dwarf_decode_lines): Complain if the line section info is missing.
Use read_1_signed_byte to extract lh.line_base to avoid
problems with compilers whose plain char is represented by an
unsigned char.
Add cleanups for allocated temporary storage.
Start a subfile for the first file in the state machine.
Fix off by one problem with dirs.dirs access.
Use comp_dir when directory index is 0.
Support multiple sequences (from Jason Merrill <jason@cygnus.com>).
(dwarf2_start_subfile): Try to keep line numbers from identical
absolute and relative file names in a common subfile.
(new_symbol): Allocate symbol and symbol name on the symbol_obstack.
Set SYMBOL_LINE from DW_AT_decl_line if present.
Set SYMBOL_TYPE from passed type if not NULL.
Change DW_TAG_variable symbol types with missing type entries
to a sensible type.
Handle optimized_out, offreg and islocal storage classes.
Add external symbols with type information whose address isn't
known as LOC_UNRESOLVED symbols.
Synthesize typedefs for C++ classes, structs, unions and enumerations.
Handle DW_TAG_enumerator symbols, complain for unrecognized
symbol tags.
(die_type): A missing DW_AT_type represents a void type.
Use dwarf2_get_ref_die_offset to get the absolute offset for
the die reference.
(die_containing_type): New function to build type from
DW_AT_containing_type attribut.
(read_type_die): Handle DW_TAG_ptr_to_member_type.
Treat DW_TAG_subprogram like DW_TAG_subroutine_type.
(dwarf_base_type): Fix typo with creation of FT_UNSIGNED_SHORT
fundamental type.
(create_name): Removed, symbol name allocation is now done
in new_symbol.
(dump_die): Use print_address_numeric to print a CORE_ADDR.
(dwarf2_empty_die_ref_table): New function to clear the die
reference table.
(dwarf2_get_ref_die_offset): New function to get the absolute
die offset from a die reference attribute.
(decode_locdesc): Complete rewrite using a stack, code mostly
borrowed from dwarfread.c:locval.
(dwarf_alloc_type): Removed, replaced by direct calls to alloc_type.
(dwarf_alloc_block): Allocate block on temporary obstack.
* elfread.c (elf_symtab_read): When handling Irix dynamic symbols,
skip section name symbols and relocate all others.
(elf_symfile_read): Build dwarf2 psymtab even if offset is non-zero.
* irix5-nat.c (fetch_core_registers): Handle core_reg_sect
from N32 executables. Call registers_fetched after extracting
the registers.
(obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR): New
definitions to enable support of O32 and N32 format objlists.
(struct so_list): New members offset, so_name and lmstart to
eliminate dependencies from the objlist format used.
(solib_map_sections, symbol_add_stub, solib_add,
info_sharedlibrary_command, solib_address, clear_solib): Use
so_name and LM_OFFSET.
(first_link_map_member): Rewrite to enable support of O32 and N32
format objlists.
(next_link_map_member, xfer_link_map_member): New functions to
support O32 and N32 format objlists.
(find_solib): Use first_link_map_member, next_link_map_member and
xfer_link_map_member.
(solib_create_inferior_hook): Use TARGET_SIGNAL_* instead of
host signal numbers.
* mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators):
Pass CORE_ADDR variant to add_psymbol_to_list.
* mips-tdep.c (heuristic_proc_desc): Stop examining the prologue
if we encounter a positive stack adjustment. Handle `move $30,$sp'.
Handle `sd reg,offset($sp)' for 32 bit ABIs.
* symmisc.c (dump_msymbols, print_partial_symbols): Use
print_address_numeric to print a SYMBOL_VALUE_ADDRESS.
(dump_symtab): Print compilation directory if it is not NULL.
* valops.c (search_struct_field, value_struct_elt_for_reference):
Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the
address of a static member.
|
|
|
|
if we encounter a positive stack adjustment.
(find_proc_desc): If heuristic_fence_post is non-zero, use
heuristic_proc_start to determine the start of a function before
calling heuristic_proc_desc.
* coffread.c (coff_symtab_read): Change minimal symbol types
for C_LABEL symbols from mst_* to mst_file_*.
* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* configure.in: Handle error message from sun3 native ld when
configuring HLDFLAGS.
* configure: Regenerated with autoconf.
* c-valprint.c (c_value_print): Adjust value address by VALUE_OFFSET.
* cp-valprint.c (cp_print_value): Prevent gdb crashes by making sure
that the virtual base pointer from an user object still points to
accessible memory.
* dbxread.c (dbx_symfile_init): Initialize sym_stab_info to
clear the recently added header_files fields.
(dbx_symfile_finish): Free hfiles[i].vector to avoid storage leak.
|
|
markers correctly; this fixes problem on Vr5000 where all
functions in a module had the same address.
* configure.in, configure.tgt, configure.host, gdbserver/configure.in:
Correct for pc-linux-gnu problem in config.guess.
* configure: Regenerate.
|
|
* configure.tgt: New file, target configuration mapping.
* configure.in: Remove host and target mapping.
* configure: Rebuild.
|
|
files).
* (SUBDIRS): Remove mswin.
* Change procedure for creating init.c. Speeds things up quite a
bit.
* config.in configure configure.in: Check for select, poll.
* Check for OSF header files before including hpux-thread.o.
* Don't configure doc or testsuite when building under MSVC.
* findvar.c value.h (read_register_pid write_register_pid): Make
global. Needed for hppa-tdep.c.
* (supply_register): Don't set pid to inferior_pid when supplying
registers.
* hppa-tdep.c (saved_pc_after_call): frame_saved_pc ->
FRAME_SAVED_PC.
* (frame_saved_pc): Change name to hppa_frame_saved_pc.
* (hppa_pop_frame): Don't use a pid of 0 with target_write_pc.
Use write_pc instead, which uses the correct pid.
* (target_read_pc target_write_pc): Use read/write_register_pid
instead of read/write_register to preserve the pid passed in.
* inftarg.c (child_can_run): Add flag child_suppress_run to allow
hpux-threads.c to override this as a runnable target.
* config/pa/nm-hppah.h: Define target_new_objfile and
target_pid_to_str.
* config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc
instead of frame_saved_pc.
* config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb.
* config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since
we can't easily determine the start file bounds with ELF.
* config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb.
* hpux-thread.c: New file for HPUX/OSF thread support.
* osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF
thread support.
|
|
|
|
with the current files it is built from.
|
|
|
|
* configure: Rebuild.
|
|
(HLDENV): Set to @HLDENV@.
(gdb): Prefix link command line with $(HLDENV).
* configure.in: Add support to test for --enable-shared and
generate appropriate values for HLDFLAGS and HLDENV.
* configure: Regenerated with autoconf.
PR 10489
|
|
mainsym def into the block it's used in.
* configure.in configure: Allow NATDEPFILES to be recognized in
.mh files regardless of whitespace.
* cpu32bug-rom.c (cpu32bug_cmds): Change load_response string to
keep downloads from hanging.
* remote-wiggler.c: Add support for flash upgrades.
* (wiggler_error): Fix message format. Add new error code.
* (wiggler_write_byets): Error code is hex. Report errors with
proper routine name.
* (wiggler_read_byets): Report errors with proper routine name.
* (get_packet): Add support for new flash commands.
* (wiggler_load): Call clear_symtab_users() to reset things
properly after download.
* (flash_xfer_memory bdm_update_flash_command): New funxtions to
support flash upgrades for Wiggler.
* (_initialize_remote_wiggler): Add `bdm update-flash' command.
|
|
defs for BFD stuff.
* remote-wiggler.c (wiggler_error): Error codes are hex. Also,
fix default message generation.
|
|
mswin/libwingdb.a and remote-wiggler.o.
* breakpoint.c (breakpoint_here_p): Clean up bp enabled test.
* (breakpoint_inserted_here_p): New func, just like
breakpoint_here_p, except it's honest. Honestly.
* breakpoint.h: Proto for above.
start-sanitize-gdbtk
* configure configure.in: Add host *windows* to list of hosts
that don't support GDBtk.
end-sanitize-gdbtk
* configure configure.in: Add mswin to configdirs if host is
i[3456]86-*-windows.
* core-aout.c (fetch_core_registers register_addr) gdbcore.h:
Change all vars that can contain addresses to type CORE_ADDR.
* findvar.c (supply_register): Allow val to be NULL. This means
that regno is unsupported.
* (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms
just call pid forms with inferior_pid so that there's only once
place to hack PC's and such.
* infrun.c (proceed): Don't skip breakpoints if user changed PC.
* remote-wiggler.c: New file. Support for BDM interface from
Macraigor Systems.
* serial.c: Enhance serial logging capability. Add hex and octal
output modes (set remotelogbase {hex|octal|ascii}. Also log
breaks, timeouts, errors, and eofs.
* serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper
function so that we can log breaks. Don't export serial_logfile
or serial_logfp.
* top.c (execute_command): Don't test for serial_logfp here.
Just call serial_log_comand, and let serial.c sort it out.
* valops.c (value_of_variable): Don't attempt to establish frames
for static and global variables. This makes things work a bit
better if the stack or frame pointer is trashed.
* config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o.
* config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack
misaligned stacks during function calls.
|
|
CY_AC_LOAD_TCLCONFIG.
* configure: Rebuild.
|
|
|
|
* configure.in: work around host_alias configure bug.
AC_CANONICAL_HOST is called twice (first by AC_CHECK_TOOL
and second by AC_CANONICAL_SYSTEM). The second clobbers the
previous setting. Circumventing by moving the second check
to before the first.
* configure: regenerated
|
|
* config/d10v/d10v.mt: New file.
* config/d10v/tm-d10v.h: New file.
* configure.in: New target D10V.
* d10v-tdep.c: New file.
|
|
PRINTF_HAS_LONG_LONG.
* expprint.c (dump_expression): Ditto.
* configure.in: Fix check for long long support in compiler to
use a function body, not a nested function.
* configure: Rebuild with autoconf.
|
|
* configure.in: Add stdlib.h to AC_CHECK_HEADERS. Call
BFD_NEED_DECLARATION on malloc, realloc, and free.
* acconfig.h: Add NEED_DECLARATION_MALLOC,
NEED_DECLARATION_REALLOC, and NEED_DECLARATION_FREE.
* configure, config.in: Rebuild.
* defs.h: Include <stddef.h> and <stdlib.h> based on HAVE_*_H
rather than __STDC__. Only declare malloc, realloc, and free if
NEED_DECLARATION_* is defined.
|
|
C, else it's `const'.
* c-lang.c c-lang.h ch-lang.c f-lang.c language.c m2-lang.c
scm-lang.c: Microsoft C can't hack const pointers. Use CONST_PTR
macro instead.
* configure configure.in defs.h: Use AC_C_CONST to figure out if
the compiler supports const. Gets rid of some cruft in defs.h.
* dwarf2read.c: <string.h> -> "gdb_string.h"
* remote-sim.c: Add prototypes. Fix call to gdbsim_kill.
* sparcl-tdep.c (download): Add prototypes to write_routine and
start_routine args.
* mswin/gdbwin.c: Don't include both varargs.h AND stdarg.h. Get
rid of varargs.h Include string.h.
* (gdbwin_update gdbwin_fputs regs_changed_f bpt_changed_f
update): Fix prototypes, fix calls.
* (update): Return value for catch_errors.
* (run_execute_command togdb_command_from_tty togdb_command):
Cleanup catching of errors from calls to execute_command. Also,
dup command string to avoid modifying const strings.
* (togdb_breakinfo_i_init togdb_breakinfo_i_next): Use 0 instead
of NULL when see if b->address isn't set.
* (bi_disable_bpt bi_enable_bpt bi_delete_all
bi_delete_breakpoint): Add arg to calls to update.
* (gui_command): Add prototype.
* (mswin_query): Fix prototype.
* (_initialize_gdbwin): Dup string to avoid modifying const.
* (info_path togdb_get_info_path): Remove const from decls cuz
this can't be const (it points at malloc'ed memory).
* (togdb_searchpath): Remove const from path. Dup string to
avoid modifying const strings.
* rindex -> strrchr.
* (gdbwin_list_symbols): Regexp param is const.
* Fix lots of refs to psymtabs to deref correct pointers.
* (togdb_set_breakpoint_sal): Call set_breakpoint_sal with sal,
not &sal.
* mswin/gdbwin.h (togdb_searchpath togdb_get_info_path
toget_set_info_path): Fix prototypes to match reality.
* mswin/gui.cpp: Define _beginthreadex and _endthreadex routines
with proper prototypes.
* mswin/iface.cpp (gdbwin_fputs): Define with correct number of args.
* mswin/ser-win32s.c: Fix defs of min and max.
* mswin/serdll32.c (OpenComm16): Make cbInQueue and cbOutQueue be
USHORT.
* (WriteComm16): Change lpBug from LPVOID to LPCSTR.
* mswin/serdll32.h: Fix prototypes for OpenComm16 and WriteComm16.
|
|
* gdbtk.c (mainWindow): Deleted.
(cleanup_init): Don't destroy main window.
(gdbtk_init): Main window now created by Tk_Init.
* configure.in: Most X checks now handled automatically by Tk.
Use new macros to find Tcl/Tk.
* aclocal.m4: New version for new Tcl/Tk; from Don Libes.
* config.in, configure: Regenerated.
* Makefile.in (TCL, TCL_CFLAGS, TK, TK_CFLAGS, X11_CFLAGS,
X11_LDFLAGS, X11_LIBS): Changed for new Tcl and Tk.
|
|
known problem on HPUX with native compiler.
(configure): Regenerated.
|
|
* configure: Regenerate with autoconf.
* acconfig.h: Add CC_HAS_LONG_LONG
* config.in: Regenerate with autoheader.
* config/mips/tm-mips64.h (FORCE_LONG_LONG): Remove
* config/sparc/tm-sp64.h (CC_HAS_LONG_LONG): Remove.
* config/mips/tm-vr4300el.h (CC_HAS_LONG_LONG): Remove.
* config/mips/tm-vr4300.h (CC_HAS_LONG_LONG): Remove.
* config/mips/xm-irix5.h (CC_HAS_LONG_LONG): Remove
(PRINTF_HAS_LONG_LONG): Remove.
(FORCE_LONG_LONG): Remove.
* config/powerpc/xm-aix.h (UINT_MAX): Undef and use gdb's version.
* config/convex/xm-convex.h (CC_HAS_LONG_LONG): Remove
(PRINTF_HAS_LONG_LONG): Remove.
* config/xm-nbsd.h (CC_HAS_LONG_LONG): Remove.
(PRINTF_HAS_LONG_LONG): Remove.
* config/pa/tm-hppa.h (GET_FIELD): Put parens around
subtraction inside shift. Put parens around subtraction
in operand of bitwise and.
(struct frame_info): Forward declare
if __STDC__ defined.
(frame_saved_regs): Ditto.
(struct value): Ditto.
(struct type): Ditto.
(struct inferior_status): Ditto.
(init_extra_frame_info): Add prototype.
(skip_prologue): Ditto.
(frameless_function_invocation): Ditto.
(frame_chain): Ditto.
(frame_chain_valid): Ditto.
(saved_pc_after_call): Ditto.
(hppa_fix_call_dummy): Ditto.
(hppa_push_arguments): Ditto.
(pa_do_registers_info): Ditto.
(in_solib_call_trampoline): Ditto.
(in_solib_return_trampoline): Ditto.
(push_dummy_frame): Ditto.
* convex-tdep.c (decout): Use print_longest rather than
fprintf_filtered.
* defs.h: Remove use of FORCE_LONG_LONG and __GNUC__ to set
CC_HAS_LONG_LONG.
(INT_MIN): Fix so it works correctly when assigned to a long long.
* valprint.c (longest_to_int): Rewrite to remove dependence
on INT_MIN and INT_MAX.
(print_longest): Rewrite the code that falls back to synthesized
hex output when LONGEST value is not representable as in a long and
printf doesn't support printing long longs.
* ch-valprint.c (chill_val_print): Cast 2nd arg of
chill_print_type_scalar to LONGEST.
chill_print_type_scalar): Make static and add prototype.
* hppa-tdep.c (get_field): Ifdef out unused function.
(set_field): Ditto.
(extract_3): Ditto.
(extract_5_store): Ditto.
(extract_11): Ditto.
(extract_12): Ditto.
(deposit_17): Ditto.
(extract_14): Convert to static and add prototype.
(deposit_14): Ditto.
(extract_21): Ditto.
(deposit_21): Ditto.
(extract_17): Ditto.
(extract_5r_store): Ditto.
(extract_5R_store): Ditto.
(extract_5_load): Ditto.
(find_proc_framesize): Ditto.
(find_dummy_frame_regs): Ditto.
(sign_extend): Ditto.
(find_unwind_entry): Add prototype.
(find_return_regnum): Ditto.
(unwind_command): Ditto.
(find_dummy_frame_regs): Add parens around subtraction in operand
of bitwise-and.
(skip_prologue): Add parens around operands of logical-and inside
operand of logical-or.
(sign_extend): Add parens around operands of subtraction inside
operand of shift.
(low_sign_extend): Ditto.
* top.c (filename_completer): Convert old style decl of
filename_completion_function into prototype.
* f-lang.c (patch_common_entries): Ifdef out unused function.
* stabsread.c (read_cfront_baseclasses): Remove unused local
variable "msg_noterm".
(resolve_cfront_continuation): Remove unused local variable "fip".
(read_type): Remove unused variable xtypenums.
(read_cfront_static_fields): Remove unused variable "i".
(read_cfront_static_fields): Remove unused variable "nfields".
(read_cfront_member_functions): Add missing comment terminator.
(read_cfront_static_fields): Return 1 rather than random value.
(read_cfront_baseclasses): Ditto.
(read_cfront_baseclasses): Ditto.
(read_cfront_baseclasses): Ditto.
* somsolib.c (som_solib_create_inferior_hook): Remove unused
variable "u".
(som_solib_create_inferior_hook): Remove unused variable
shadow_contents.
(language.h): Add for needed prototypes.
(som_solib_sharedlibrary_command): Add prototype.
* hpread.c: (hpread_read_array_type): Add prototype.
* somread.c (hpread_build_pysmtabs): Add prototype.
(hpread_symfile_finish): Ditto.
(hpread_symfile_init): Ditto.
* hppah-nat.c (fetch_register): Convert old style decl
to prototype.
(gdbcore.h): Include for needed prototypes.
(fetch_register): Remove unused variable "mess".
* remote-pa.c (get_offsets): Ifdef out unused function.
(remote_start_remote): Remove unused variable "timeout".
(boot_board): Add prototype.
(reaad_frame): Add prototype.
(getpkt): Remove unused variable "bp".
(remote_kill): Add prototype.
(remote_mourn): Add prototype.
(remote_insert_breakpoint): Add prototype.
(remote_remove_breakpoint): Add prototype.
* valops.c (value_push): Only use if PUSH_ARGUMENTS is not defined.
* infcmd.c (do_registers_info): Only need prototype if
DO_REGISTERS_INFO is not defined.
(breakpoint_auto_delete_contents): Only need if
CALL_DUMMY_BREAKPOINT_OFFSET is defined.
|
|
|
|
config/sparc/tm-sparclite.h: Initialize tm_print_insn from
TM_PRINT_INSN, which comes from the tm file.
* Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure.
* configure configure.in: Only make sol-thread.o for native.
Also, switch to dlopened libthread_db.so.1.
* sol-thread.c: Switch to using dlopen to get the thread_db
library.
* configure, configure.in: Change test for libthread_db to only
work for configs where build/host/target are the same.
|
|
|
|
* monitor.h,monitor.c:
Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on
setmem command), MO_RUN_FIRST_TIME (if command to start process
running on target is different from one to continue execution),
MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix).
* monitor.c,parse.c,sparc-tdep.c:
Don't require strings in the registers array. This is to allow
NULLs to be place holders in the tm-*.h file so that only minor
changes are needed when a new processor is introduced (eg, one
without floating point).
* sparc-tdep.c: Conditionally remove dependancies on floating point.
* sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h:
New files for target sparclet.
* symfile.c: Add option for 2nd parameter on load command : a load
offset added to the vma of each section.
|
|
* configure: Regenerated.
* source.c (find_source_lines): Reassign size to result of read.
|