aboutsummaryrefslogtreecommitdiff
path: root/gdb/configure.tgt
AgeCommit message (Collapse)AuthorFilesLines
2018-12-08gdb/or1k: Add linux debugging supportStafford Horne1-0/+8
Up until now OpenRISC GDB only has supported bare metal debugging. This patch adds linux userspace debugging and core dump analysis support. The changes are loosely based on nios2 and riscv implementations. This was tested with linux 4.20 core dumps for executables linked against musl libc. bfd/ChangeLog: * elf32-or1k.c (or1k_grok_prstatus): New function. (or1k_grok_psinfo): Likewise. gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add or1k-linux-tdep.o. * configure.tgt: Add or1k*-*-linux*. * or1k-linux-tdep.c: New file. * or1k-tdep.c (or1k_gdbarch_init): Call gdbarch_init_osabi.
2018-11-21gdb/riscv: Add target description supportAndrew Burgess1-3/+6
This commit adds target description support for riscv. I've used the split feature approach for specifying the architectural features, and the CSR feature is auto-generated from the riscv-opc.h header file. If the target doesn't provide a suitable target description then GDB will build one by looking at the bfd headers. This commit does not implement target description creation for the Linux or FreeBSD native targets, both of these will need to add read_description methods into their respective target classes, which probe the target features, and then call riscv_create_target_description to build a suitable target description. Until this is done Linux and FreeBSD will get the same default target description based on the bfd that bare-metal targets get. I've only added feature descriptions for 32 and 64 bit registers, 128 bit registers (for RISC-V) are not supported in the reset of GDB yet. This commit removes the special reading of the MISA register in order to establish the target features, this was only used for figuring out the f-register size, and even that wasn't done consistently. We now rely on the target to tell us what size of registers it has (or look in the BFD as a last resort). The result of this is that we should now support RV64 targets with 32-bit float, though I have not extensively tested this combination yet. * Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o. (HFILES_NO_SRCDIR): Add arch/riscv.h. * arch/riscv.c: New file. * arch/riscv.h: New file. * configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into this list, and add arch/riscv.o. * features/Makefile: Add riscv features. * features/riscv/32bit-cpu.c: New file. * features/riscv/32bit-cpu.xml: New file. * features/riscv/32bit-csr.c: New file. * features/riscv/32bit-csr.xml: New file. * features/riscv/32bit-fpu.c: New file. * features/riscv/32bit-fpu.xml: New file. * features/riscv/64bit-cpu.c: New file. * features/riscv/64bit-cpu.xml: New file. * features/riscv/64bit-csr.c: New file. * features/riscv/64bit-csr.xml: New file. * features/riscv/64bit-fpu.c: New file. * features/riscv/64bit-fpu.xml: New file. * features/riscv/rebuild-csr-xml.sh: New file. * riscv-tdep.c: Add 'arch/riscv.h' include. (riscv_gdb_reg_names): Delete. (csr_reggroup): New global. (struct riscv_register_alias): Delete. (struct riscv_register_feature): New structure. (riscv_register_aliases): Delete. (riscv_xreg_feature): New global. (riscv_freg_feature): New global. (riscv_virtual_feature): New global. (riscv_csr_feature): New global. (riscv_create_csr_aliases): New function. (riscv_read_misa_reg): Delete. (riscv_has_feature): Delete. (riscv_isa_xlen): Simplify, just return cached xlen. (riscv_isa_flen): Simplify, just return cached flen. (riscv_has_fp_abi): Update for changes in struct gdbarch_tdep. (riscv_register_name): Update to make use of tdesc_register_name. Look up xreg and freg names in the new globals riscv_xreg_feature and riscv_freg_feature. Don't supply csr aliases here. (riscv_fpreg_q_type): Delete. (riscv_register_type): Use tdesc_register_type in almost all cases, override the returned type in a few specific cases only. (riscv_print_one_register_info): Handle errors reading registers. (riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for registers that are otherwise unknown to GDB. Also check the csr_reggroup. (riscv_print_registers_info): Remove assert about upper register number, and use gdbarch_register_reggroup_p instead of short-cutting. (riscv_find_default_target_description): New function. (riscv_check_tdesc_feature): New function. (riscv_add_reggroups): New function. (riscv_setup_register_aliases): New function. (riscv_init_reggroups): New function. (_initialize_riscv_tdep): Add calls to setup CSR aliases, and setup register groups. Register new riscv debug variable. * riscv-tdep.h: Add 'arch/riscv.h' include. (struct gdbarch_tdep): Remove abi union, and add riscv_gdbarch_features field. Remove cached quad floating point type, and provide initialisation for double type field. * target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to the list of targets using the feature based target descriptions. * NEWS: Mention target description support. gdb/doc/ChangeLog: * gdb.texinfo (Standard Target Features): Add RISC-V Features sub-section.
2018-11-06gdb: xtensa: use linux ABI code for uclinuxMax Filippov1-1/+1
gdb/ 2018-11-06 Max Filippov <jcmvbkbc@gmail.com> * configure.tgt (xtensa*-*-linux*): Change to xtensa*-*-*linux* so that it applies to uclinux as well.
2018-11-02(Ada) Add ravenscar tasking support on AArch64Joel Brobecker1-1/+2
This patch adds support for debugging Ravenscar tasks, similar to what is done for ppc and sparc. gdb/ChangeLog: * aarch64-ravenscar-thread.h, aarch64-ravenscar-thread.c: New files. * aarch64-tdep.c: #include "aarch64-ravenscar-thread.h". (aarch64_gdbarch_init): Add call to register_aarch64_ravenscar_ops. * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-ravenscar-thread.o. (HFILES_NO_SRCDIR): Add aarch64-ravenscar-thread.h. (ALLDEPFILES): Add aarch64-ravenscar-thread.c. * configure.tgt (cpu_obs) [aarch64*-*-*]: Add ravenscar-thread.o and aarch64-ravenscar-thread.o. * NEWS: Add entry documenting Ravenscar tasking support on AArch64 ELF.
2018-11-01arm-pikeos: software single stepJerome Guitton1-0/+1
On ARM, PikeOS does not support hardware single step, causing various semi-random errors when trying to next/step over some user code. So this patch changes this target to use software-single-step instead. The challenge is that, up to now, the PikeOS target was in all respects identical to a baremetal target as far as GDB was concerned, meaning we were using the baremetal osabi for this target too. This is no longer possible, and we need to introduce a new OSABI variant. Unfortunately, there isn't anything in the object file that would allow us to differentiate between the two platforms. So we have to rely on a heuristic instead, where we look for some known symbols that are required in a PikeOS application (these symbols are expected to be defined by the default linker script, and correspond to routines used to allocate the application stack). For the long run, the hope is that the stub implementation provided by PikeOS is enhanced so that it includes vContSupported+ to the $qSupported query, and then that the reply to the "vCont?" query only return support for "continue" operations (thus exclusing "step" operations). We could then use that information to reliably determine at connection time that the target does not support single-stepping and therefore automatically turn software single-stepping automatically based on it. gdb/ChangeLog: * defs.h (enum gdb_osabi): Add GDB_OSABI_PIKEOS. * osabi.c (gdb_osabi_names): Add name for GDB_OSABI_PIKEOS. * arm-pikeos-tdep.c: New file. * configure.tgt: Add arm-pikeos-tdep.o to the case of ARM embedded system. * Makefile.in (ALL_TARGET_OBS): Add arm-pikeos-tdep.o. Tested on arm-pikeos and arm-elf using AdaCore's testsuite. We also evaluated it on armhf-linux as a cross platform.
2018-10-23GDB: New target s12zJohn Darrington1-0/+5
gdb/ * configure.tgt: Add configuration for s12z. * s12z-tdep.c: New file. * NEWS: Mention new target.
2018-10-08Add FreeBSD/riscv architecture.John Baldwin1-0/+5
Support for collecting and supplying general purpose and floating point register sets is provided along with signal frame unwinding. FreeBSD only supports RV64 currently, so while some provision is made for RV32 in the general-purpose register set, the changes have only been tested on RV64. gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add riscv-fbsd-tdep.o. (HFILES_NO_SRCDIR): Add riscv-fbsd-tdep.h. (ALLDEPFILES): Add riscv-fbsd-tdep.c. * NEWS: Mention new FreeBSD/riscv target. * configure.tgt: Add riscv*-*-freebsd*. * riscv-fbsd-tdep.c: New file. * riscv-fbsd-tdep.h: New file.
2018-08-28Add support for new target 'csky'.Hafiz Abid Qadeer1-0/+11
2018-08-28 Jiangshuai Li <jiangshuai_li@c-sky.com> Hafiz Abid Qadeer <abidh@codesourcery.com> Don Breazeal <donb@codesourcery.com> * csky-linux-tdep.c: New file. * csky-tdep.c: Likewise. * csky-tdep.h: Likewise. * Makefile.in (ALL_TARGET_OBS): Add csky-linux-tdep.o and csky-tdep.o. (HFILES_NO_SRCDIR): Add csky-tdep.h. (ALLDEPFILES): Add csky-linux-tdep.c and csky-tdep.c * configure.tgt: Add csky support.
2018-08-09RISC-V: Add configure support for riscv*-linux*.Jim Wilson1-0/+6
This adds the target and native configure support, and the NEWS entries for the new target and native configurations. gdb/ * Makefile.in (ALL_TARGET_OBS): Add riscv-linux-tdep.c. (ALLDEPFILES): Add riscv-linux-nat.c, and riscv-linux-tdep.c. * NEWS: Mention new GNU/Linux RISC-V target. * configure.host: Add riscv*-*-linux*. * configure.nat: Add riscv*. * configure.tgt: Add riscv*-*-linux*.
2018-05-22[PowerPC] Consolidate linux target description selectionPedro Franco de Carvalho1-1/+2
Share target description declarations and selection among ppc linux native targets, core files, gdbserver and IPA. To avoid complicated define guards, gdbserver and IPA now have declarations for all descriptions, including 64-bit generated descriptions when compiled in 32-bit mode. These have always been linked into the gdbserver and IPA binaries. Because they might be uninitialized, the selection function checks that the selected description is initialized. gdb/ChangeLog: 2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com> * arch/ppc-linux-common.c: New file. * arch/ppc-linux-common.h: New file. * arch/ppc-linux-tdesc.h: New file. * configure.tgt (powerpc*-*-linux*): Add arch/ppc-linux-common.o. * Makefile.in (ALL_TARGET_OBS): Add arch/ppc-linux-common.o. (HFILES_NO_SRCDIR): Add arch/ppc-linux-common.h and arch/ppc-linux-tdesc.h. * ppc-linux-nat.c: Include arch/ppc-linux-common.h and arch/ppc-linux-tdesc.h. (ppc_linux_nat_target::read_description): Remove target description matching code. Fill a ppc_linux_features struct and call ppc_linux_match_description with it. Move comment about ISA 2.05 to ppc-linux-common.c. * ppc-linux-tdep.c: Include arch/ppc-linux-common.h and arch/ppc-linux-tdesc.h. (ppc_linux_core_read_description): Remove target description matching code. Fill a ppc_linux_features struct and call ppc_linux_match_description with it. * ppc-linux-tdep.h (tdesc_powerpc_32l, tdesc_powerpc_64l) (tdesc_powerpc_altivec32l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell32l, tdesc_powerpc_cell64l) (tdesc_powerpc_vsx32l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_64l) (tdesc_powerpc_isa205_altivec32l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_isa205_vsx64l) (tdesc_powerpc_e500l): Remove. gdb/gdbserver/ChangeLog: 2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com> * configure.srv (srv_tgtobj): Add arch/ppc-linux-common.o. * Makefile.in (SFILES): Add arch/ppc-linux-common.c. * linux-ppc-tdesc.h: Rename to linux-ppc-tdesc-init.h. * linux-ppc-tdesc-init.h (tdesc_powerpc_32l, tdesc_powerpc_64l) (tdesc_powerpc_altivec32l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell32l, tdesc_powerpc_cell64l) (tdesc_powerpc_vsx32l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_64l) (tdesc_powerpc_isa205_altivec32l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_isa205_vsx64l) (tdesc_powerpc_e500l): Remove. * linux-ppc-ipa.c: Include arch/ppc-linux-tdesc.h and linux-ppc-tdesc-init.h. Don't include linux-ppc-tdesc.h. * linux-ppc-low.c: Include arch/ppc-linux-common.h, arch/ppc-linux-tdesc.h, and linux-ppc-tdesc-init.h. Don't include linux-ppc-tdesc.h. (ppc_arch_setup): Remove target description matching code. Fill a ppc_linux_features struct and call ppc_linux_match_description with it.
2018-05-11gdb: xtensa: drop gdb_target definitionMax Filippov1-1/+1
gdb_target definitions were removed from configure.tgt in 2007, before xtensa port was merged. Remove it from the xtensa target as well. gdb/ 2018-05-11 Max Filippov <jcmvbkbc@gmail.com> * configure.tgt (xtensa*-*-linux*): Drop gdb_target definition.
2018-04-16gdb: Remove support for SH-5/SH64Pedro Alves1-8/+3
Since bfd dropped support for SH-5, there's no point in keeping it in GDB either. This restores --enable-targets=all builds. gdb/ChangeLog: 2018-04-16 Pedro Alves <palves@redhat.com> * MAINTAINERS (sh): Remove. * Makefile.in (ALL_TARGET_OBS): Remove sh64-tdep.o. (HFILES_NO_SRCDIR): Remove sh64-tdep.h. (ALLDEPFILES): Remove sh64-tdep.c. * NEWS: Mentions that support for SH-5/SH64 is removed. * configure.tgt (sh*-*-linux*): Remove reference to sh64-tdep.o. (sh*-*-openbsd*): Ditto. (sh64-*-elf*): Remove. (sh*): Remove. * regcache.c (cooked_write_test): Remove bfd_mach_sh5 case. * sh-linux-tdep.c: Remove reference to bfd_mach_sh5. * sh-tdep.c: No longer include "sh64-tdep.h". (sh_gdbarch_init): Remove reference to bfd_mach_sh5. * sh64-tdep.c, sh64-tdep.h: Remove files.
2018-04-16gdb: Remove OpenBSD/m88k supportPedro Alves1-5/+0
Support for m88k was fully removed from bfd, which broke gdb --enable-targets=all builds: > gdb/m88k-tdep.c: In function void _initialize_m88k_tdep(): > gdb/m88k-tdep.c:867:21: error: bfd_arch_m88k was not declared in this scope > gdbarch_register (bfd_arch_m88k, m88k_gdbarch_init, NULL); There's no point in keeping GDB support for OpenBSD/m88k with no bfd support, so this commit simply removes the port. gdb/ChangeLog: 2018-04-16 Pedro Alves <palves@redhat.com> * MAINTAINERS: Remove m88k. * Makefile.in (ALL_TARGET_OBS): Remove m88k-tdep.o. (HFILES_NO_SRCDIR): Remove m88k-tdep.h. (ALLDEPFILES): Remove m88k-bsd-nat.c and m88k-tdep.c. * NEWS: Mention that support for OpenBSD/m88k was removed. * configure.host (m88*-*-*): Remove support. * configure.nat (m88k-*-*): Remove support. * configure.tgt (m88*-*-openbsd*): Remove. * m88k-bsd-nat.c, m88k-tdep.c, m88k-tdep.h: Delete.
2018-04-15Add x86-tdep.o to i386/amd64 target buildSimon Marchi1-2/+3
We get this error when doing a build with a single amd64 target (the default when doing just ./configure on x86-64 GNU/Linux): /home/simark/src/binutils-gdb/gdb/i386-tdep.c:4431: error: undefined reference to 'x86_in_indirect_branch_thunk(unsigned long, char const**, int, int)' /home/simark/src/binutils-gdb/gdb/amd64-tdep.c:3045: error: undefined reference to 'x86_in_indirect_branch_thunk(unsigned long, char const**, int, int)' The problem is that commit 1d509aa625f8 ("infrun: step through indirect branch thunks") missed adding x86-tdep.o to the list of object file included in an amd64 or i386 build. The problem is not seen with --enable-targets=all because that file is included in ALL_TARGET_OBS. Built-tested using: * --host=x86_64-pc-linux-gnu --target=x86_64-pc-linux-gnu * --host=armv7-rpi2-linux-gnueabihf --target=x86_64-pc-linux-gnu gdb/ChangeLog: * configure.tgt (x86_tobjs): New variable. (amd64_tobjs, i386_tobjs): Use it.
2018-03-06gdb: Initial baremetal riscv supportAndrew Burgess1-0/+5
This commit introduces basic support for baremetal RiscV as a GDB target. This target is currently only tested against the RiscV software simulator, which is not included as part of this commit. The target has been tested against the following RiscV variants: rv32im, rv32imc, rv32imf, rv32imfc, rv64im, rv64imc, rv64imfd, rv64imfdc. Across these variants we pass on average 34858 tests, and fail 272 tests, which is ~0.8%. The RiscV has a feature of its ABI where structures with a single floating point field, a single complex float field, or one float and one integer field are treated differently for argument passing. The new test gdb.base/infcall-nested-structs.exp is added to cover this feature. As passing these structures should work on all targets then I've made the test as a generic one, even though, for most targets, there's probably nothing special about any of these cases. gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add riscv-tdep.o (HFILES_NO_SRCDIR): Add riscv-tdep.h. (ALLDEPFILES): Add riscv-tdep.c * configure.tgt: Add riscv support. * riscv-tdep.c: New file. * riscv-tdep.h: New file. * NEWS: Mention new target. * MAINTAINERS: Add entry for riscv. gdb/testsuite/ChangeLog: * gdb.base/infcall-nested-structs.exp: New file. * gdb.base/infcall-nested-structs.c: New file. * gdb.base/float.exp: Add riscv support.
2018-01-23s390: Split up s390-linux-tdep.c into two filesPhilipp Rudo1-2/+2
Currently all target dependent code for s390 is in one file, s390-linux-tdep.c. This includes code general for the architecture as well as code specific for uses in GNU/Linux (user space). Up until now this was OK as GNU/Linux was the only supported OS. In preparation to support the new Linux kernel 'OS' split up the existing s390 code into a general s390-tdep and a GNU/Linux-specific s390-linux-tdep. Note: The record-replay feature will be moved in a separate patch. This is simply due to the fact that the combined patch would be too large for the mailing list. This requires setting the process_record hook during OSABI init to keep the code bisectable. The patch moving record-replay cleans up this hack. gdb/ChangeLog: * s390-linux-nat.c (s390-tdep.h): New include. * Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o. (HFILES_NO_SRCDIR): Add s390-tdep.h. (ALLDEPFILES): Add s390-tdep.c. * configure.tgt (s390*-*-linux*): Add s390-tdep.o. * s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to... * s390-tdep.h: ...this. New file. * s390-linux-tdep.c (s390-tdep.h): New include. (_initialize_s390_tdep): Rename to... (_initialize_s390_linux_tdep): ...this and adjust. (s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep) (enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to s390-tdep.h. (s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri) (is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy) (s390_is_partial_instruction, s390_software_single_step) (is_non_branch_ril, s390_displaced_step_copy_insn) (s390_displaced_step_fixup, s390_displaced_step_hw_singlestep) (s390_prologue_data, s390_addr, s390_store, s390_load) (s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue) (s390_register_call_saved, s390_guess_tracepoint_registers) (s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum) (regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register) (s390_pseudo_register_name, s390_pseudo_register_type) (s390_pseudo_register_read, s390_pseudo_register_write) (s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect) (s390_ax_pseudo_register_push_stack, s390_gen_return_address) (s390_addr_bits_remove, s390_address_class_type_flags) (s390_address_class_type_flags_to_name) (s390_address_class_name_to_type_flags, s390_effective_inner_type) (s390_function_arg_float, s390_function_arg_vector) (is_power_of_two, s390_function_arg_integer, s390_arg_state) (s390_handle_arg, s390_push_dummy_call, s390_dummy_id) (s390_frame_align, s390_register_return_value, s390_return_value) (s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp) (s390_unwind_pseudo_register, s390_adjust_frame_regnum) (s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg) (s390_trad_frame_prev_register, s390_unwind_cache) (s390_prologue_frame_unwind_cache) (s390_backchain_frame_unwind_cache, s390_frame_unwind_cache) (s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind) (s390_stub_unwind_cache, s390_stub_frame_unwind_cache) (s390_stub_frame_this_id, s390_stub_frame_prev_register) (s390_stub_frame_sniffer, s390_stub_frame_unwind) (s390_frame_base_address, s390_local_base_address) (s390_frame_base, s390_gcc_target_options) (s390_gnu_triplet_regexp, s390_stap_is_single_operand) (s390_validate_reg_range, s390_tdesc_valid) (s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to... * s390-tdep.c: ...this. New file.
2018-01-22Remove mt portYao Qi1-5/+1
This patch removes the MT port. The removal was annoucned https://sourceware.org/ml/gdb-announce/2017/msg00006.html I'll remove MT from the top-level configure later. gdb: 2018-01-22 Yao Qi <yao.qi@linaro.org> * Makefile.in (ALL_TARGET_OBS): Remove mt-tdep.o. * configure.tgt: Remove target mt. * mt-tdep.c: Remove. * regcache.c (cooked_read_test): Remove the check for mt.
2017-12-12gdb: Add OpenRISC or1k and or1knd target supportFranck Jullien1-0/+6
This patch prepares the current GDB port of the OpenRISC processor from https://github.com/openrisc/binutils-gdb for upstream merging. Testing has been done with a cgen sim provided in a separate patch. This has been tested with 2 toolchains. GCC [1] 5.4.0 from the OpenRISC project with Newlib [2] and GCC 5.4.0 with Musl [3] 1.1.4. It supports or1knd (no delay slot target). The default target is or1k (with delay slot). You can change the target arch with: (gdb) set architecture or1knd The target architecture is assumed to be or1knd [1] https://github.com/openrisc/or1k-gcc [2] https://github.com/openrisc/newlib [3] https://github.com/openrisc/musl-cross gdb/doc/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Stefan Wallentowitz <stefan@wallentowitz.de> Franck Jullien <franck.jullien@gmail.com> Jeremy Bennett <jeremy.bennett@embecosm.com> * gdb.texinfo: Add OpenRISC documentation. gdb/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Stefan Wallentowitz <stefan@wallentowitz.de> Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Franck Jullien <franck.jullien@gmail.com> Jeremy Bennett <jeremy.bennett@embecosm.com> * configure.tgt: Add targets for or1k and or1knd. * or1k-tdep.c: New file. * or1k-tdep.h: New file. * features/Makefile: Add or1k.xml to build. * features/or1k.xml: New file. * features/or1k-core.xml: New file. * features/or1k.c: Generated.
2017-12-08S390: Add symfile-memAndreas Arnez1-1/+1
For some reason symfile-mem.o is not included in the configuration for "s390*-*-linux*". It was added to the configuration of most GNU/Linux targets with a patch from Andrew Cagney: "Add symfile-mem to all linux targets" -- https://sourceware.org/ml/gdb-patches/2005-02/msg00053.html But the s390 target was overlooked at that time. Thus the command "add-symbol-file-from-memory" is missing and VDSO symbols are not loaded. This is fixed. gdb/ChangeLog: * configure.tgt (s390*-*-linux*): Add symfile-mem.o.
2017-11-24Fix aarch64-none-elf build errorAlan Hayward1-1/+1
gdb/ * configure.tgt: Add arch/aarch64.o
2017-11-24Add aarch64_create_target_descriptionAlan Hayward1-1/+1
gdb/ * Makefile.in: Add new files. * aarch64-linux-nat.c (aarch64_linux_read_description): Call aarch64_read_description. * aarch64-linux-tdep.c (aarch64_linux_core_read_description): Call aarch64_read_description. * aarch64-tdep.c (aarch64_read_description): New function. (aarch64_gdbarch_init): Call aarch64_read_description. * aarch64-tdep.h (aarch64_read_description): New function. * arch/aarch64.c: New file. * configure.tgt: Add new files.
2017-10-11Add FreeBSD/arm architecture.John Baldwin1-0/+4
Support for collecting and supplying general purpose and floating point registers is provided along with signal frame unwinding. While FreeBSD/arm kernels do populate NT_FPREGSET notes, they are always zero-filled, so this implementation ignores them. Recent FreeBSD/arm kernels generate NT_ARM_VFP notes which are used to supply floating-point registers. As with Linux, the AT_HWCAP feature flags are used to determine the correct target description. gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add arm-fbsd-tdep.o. (ALLDEPFILES): Add arm-fbsd-tdep.c. * NEWS: Mention new FreeBSD/arm target. * configure.tgt: Add arm*-*-freebsd*. * arm-fbsd-tdep.c: New file. * arm-fbsd-tdep.h: New file.
2017-10-06Move aarch64-insn.o to arch/aarch64-insn.o and Remove a rule for arch/*.cYao Qi1-1/+1
This patch moves aarch64-insn.o to arch/aarch64-insn.o. Then, all arch/*.c are built to arch/*.o, so we don't need a Makefile rule to build *.o from arch/*.c. This patch removes it too. gdb: 2017-10-06 Yao Qi <yao.qi@linaro.org> * Makefile.in (ALL_64_TARGET_OBS): Replace aarch64-insn.o with arch/aarch64-insn.o. Remove one rule. * configure.tgt: Replace aarch64-insn.o with arch/aarch64-insn.o.
2017-10-06Move arm.o arm-get-next-pcs.o arm-linux.o to arch/Yao Qi1-4/+4
It is tested by building GDB for some targets, arm-elf, arm-netbsd, arm-linux, and aarch64-linux. gdb: 2017-10-06 Yao Qi <yao.qi@linaro.org> * Makefile.in (ALL_TARGET_OBS): Replace arm.o, arm-get-next-pcs.o, and arm-linux.o with arch/arm.o, arch/arm-get-next-pcs.o and arch/arm-linux.o respectively. * configure.tgt: Likewise.
2017-10-06Move i386.o to arch/i386.oYao Qi1-1/+1
This patch changes the build that arch/i386.c is built to arch/i386.o, instead of i386.o. gdb: 2017-10-06 Yao Qi <yao.qi@linaro.org> * Makefile.in (ALL_TARGET_OBS): Rename i386.o to arch/i386.o. * configure.tgt (i386_tobjs): Replace i386.o with arch/i386.o.
2017-10-06Share code updating gdb_target_obsYao Qi1-109/+129
Nowadays, there are much duplications in configure.tgt to update gdb_target_obs, some cpu specific object files are added to gdb_target_obs to some different target triplets of the same cpu. The same problem exists for os specific object files too. It is fragile to update them, and build with all targets enabled doesn't find the problem. This patch splits the gdb_target_obs update to three steps, cpu steps, os steps, and the rest. I tested this patch by build gdb for each different target triplets respectively, aarch64-elf aarch64-rtems aarch64-freebsd aarch64-linux alpha-elf alpha-linux alpha-netbsd alpha-openbsd arm-elf arm-wince-pe arm-linux arm-netbsd arm-symbianelf avr cris-elf frv-elf h8300-elf i386-elf i386-darwin i386-dicos i386-freebsd i386-netbsdelf i386-openbsd i386-nto i386-solaris i386-linux i386-gnu i386-cygwin i386-mingw32 i386-go32 ia64-linux-gnu ia64-vms lm32-elf m32c-elf m32r-elf m32r-linux m68hc11-elf m68k-elf m68k-linux m68k-netbsd m68k-openbsd m88k-openbsd mep-elf microblaze-xilinx-elf microblaze-linux-gnu mips-elf moxie-elf ms1-elf nios2-elf nios2-linux-gnu hppa-elf hppa-linux hppa-netbsd hppa-openbsd powerpc-eabi powerpc-freebsd powerpc-netbsd powerpc-openbsd powerpc-linux powerpc-lynx178 rl78-elf rx-elf s390-linux-gnu score-elf sh-elf sh-linux sh-openbsd sh64-elf sh64-linux sh64-openbsd sparc64-linux sparc-linux sparc-freebsd sparc64-freebsd sparc-netbsd sparc64-netbsd sparc-openbsd sparc64-openbsd spu-elf tic6x-elf tic6x-uclinux v850-elf vax-netbsd vax-openbsd x86_64-linux-gnu x86_64-darwin x86_64-dicos x86_64-elf x86_64-freebsd x86_64-mingw32 x86_64-netbsd x86_64-openbsd x86_64-rtems xstormy16-elf xtensa-elf xtensa-linux gdb: 2017-10-06 Yao Qi <yao.qi@linaro.org> * configure.tgt (i386_tobjs): New variable. (amd64_tobjs): New variable. Set $cpu_obs and $os_obs.
2017-10-06[RFC] Replicate src dir in build dirYao Qi1-12/+12
Nowadays, GDB build tree is almost flat, but source tree isn't. We have arch/ nat/ target/ common/ cli/ mi/ tui/ python/ guile/ directories. We need to some rules in Makefile for source files in different source directories, like, # Rules for compiling .c files in the various source subdirectories. %.o: ${srcdir}/arch/%.c $(COMPILE) $< $(POSTCOMPILE) %.o: ${srcdir}/nat/%.c $(COMPILE) $< $(POSTCOMPILE) so we should take care of some special case that files' base name is the same, like, # Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the # object file generate by gdb/agent.c. common-agent.o: $(srcdir)/common/agent.c $(COMPILE) $(srcdir)/common/agent.c $(POSTCOMPILE) As we add more and more files in different directories, it becomes tricky to name files, because we need take this into account. This patch takes the first step toward "Replicate src dir in build dir", that is, we create arch/ directory in buildtree, and put amd64.o there as an example. Dependency tracking is updated for files with directory name. Currently, when we build amd64.o, "-c -o amd64.o -MT amd64.o -MMD -MP -MF .deps/amd64.Tpo" with this patch applied, it becomes, "-c -o arch/amd64.o -MT arch/amd64.o -MMD -MP -MF arch/.deps/amd64.o.Tpo" "make clean" removes the object files, and "make distclean" removes .deps additionally. configure file create .deps directory in each of CONFIG_SRC_SUBDIR, and pass it to Makefile.in, so that "make clean" and "make distclean" can remove stuffs there. If people agree with this change, I'll add more directories to CONFIG_SRC_SUBDIR. gdb: 2017-10-06 Yao Qi <yao.qi@linaro.org> * Makefile.in (CONFIG_SRC_SUBDIR): New. (ALL_64_TARGET_OBS): Replace amd64.o with arch/amd64.o. (clean): Remove object files and dependency files. (distclean): Remove the directory. * configure.ac: Invoke AC_CONFIG_COMMANDS. * configure: Re-generated. * configure.tgt: Replace amd64.o with arch/amd64.o.
2017-09-26Remove support for Solaris < 10 (PR gdb/22185)Rainer Orth1-12/+1
Given that GCC has obsoleted/removed support for Solaris 9 in GCC 4.9/5 in 2013: https://gcc.gnu.org/gcc-4.9/changes.html https://gcc.gnu.org/ml/gcc-patches/2013-05/msg00728.html and the last gdb version that can be compiled with gcc 4.9 is 7.12.1 only when configured with --disable-build-with-cxx, it's time to obsolete/remove support for Solaris < 10. This patch does this, simplifying configure.nat along the way (only a single sol2 configuration with variants for i386 and sparc). Some configure checks for older Solaris versions can go, too, and the check for libthread_db.so.1 removed: * Since Solaris 10, dlopen has moved to libc and libdl.so is just a filter on ld.so.1, so no need to check. * $RDYNAMIC is already handled above (and is a no-op with Solaris ld anyway). Both proc-service.c and sol-thread.c lose support for (Solaris-only) PROC_SERVICE_IS_OLD. The attached revised patch has been tested on sparcv9-sun-solaris2.10, sparcv9-sun-solaris2.11.4, amd64-pc-solaris2.10, amd64-pc-solaris2.11.4, and x86_64-pc-linux-gnu. I've also started an i386-pc-solaris2.9 build to check that it really stops as expected. PR gdb/22185 * configure.host <*-*-solaris2.[01], *-*-solaris2.[2-9]*>: Mark as obsolete. Use gdb_host sol2 for i[34567]86-*-solaris2*, x86_64-*-solaris2*. Remove i386sol2 support. * configure.nat <i386sol2>: Remove. <sol2-64>: Fold into ... <sol2>: ... this. Move common settings to default section. Add sol-thread.o. * configure.tgt <i[34567]86-*-solaris2.1[0-9]*, x86_64-*-solaris2.1[0-9]*>: Rename to ... <i[34567]86-*-solaris2*, x86_64-*-solaris2*>: ... this. <i[34567]86-*-solaris*>: Remove. <sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*>: Remove. * configure.ac: Remove wctype in libw check. (_MSE_INT_H): Don't define on Solaris 7-9. <solaris*>: Remove libthread_db.so.1 check. * configure: Regenerate. * config.in: Regenerate. * proc-service.c: Remove PROC_SERVICE_IS_OLD handling. (gdb_ps_prochandle_t, gdb_ps_read_buf_t, gdb_ps_write_buf_t) (gdb_ps_size_t): Remove. Use base types in users. * sol-thread.c: Likewise, also for gdb_ps_addr_t. * NEWS (Changes since GDB 8.0): Document Solaris 2.0-9 removal.
2017-09-21Fix aarch64-freebsd build failureYao Qi1-1/+2
I happen to see that fbsd-tdep.o is missing for target aarch64-freebsd, and it causes the build failure, aarch64-fbsd-tdep.o: In function `aarch64_fbsd_init_abi(gdbarch_info, gdbarch*)': binutils-gdb/gdb/aarch64-fbsd-tdep.c:186: undefined reference to `fbsd_init_abi(gdbarch_info, gdbarch*)' binutils-gdb/gdb/aarch64-fbsd-tdep.c:189: undefined reference to `svr4_lp64_fetch_link_map_offsets()' binutils-gdb/gdb/aarch64-fbsd-tdep.c:189: undefined reference to `set_solib_svr4_fetch_link_map_offsets(gdbarch*, link_map_offsets* (*)())' This patch fixed it. gdb: 2017-09-21 Yao Qi <yao.qi@linaro.org> * configure.tgt (aarch64*-*-freebsd*): Add fbsd-tdep.o solib-svr4.o to gdb_target_obs.
2017-09-15Fix x86 build failuresYao Qi1-3/+3
Christophe Lyon told me that GDB build failed on i386-linux with --enable-64-bit-bfd=yes, so I audit the gdb/configure.tgt again. I find that i386-darwin has the same issue too. Additionally, GDB for solaris target fails to build too. This patch fixes all of them. gdb: 2017-09-15 Yao Qi <yao.qi@linaro.org> * configure.tgt (i[34567]86-*-darwin*): Append amd64.o to gdb_target_obs. (i[34567]86-*-solaris2.1[0-9]* | x86_64-*-solaris2.1[0-9]*): Likewise. (i[34567]86-*-linux*): Likewise.
2017-09-06Add FreeBSD/aarch64 architecture.John Baldwin1-0/+5
Support for collecting and supplying general purpose and floating point register sets is provided along with signal frame unwinding. gdb/ChangeLog: * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-fbsd-tdep.o. (ALLDEPFILES): Add aarch64-fbsd-tdep.c. * NEWS: Mention new FreeBSD/aarch64 target. * configure.tgt: Add aarch64*-*-freebsd*. * aarch64-fbsd-tdep.c: New file. * aarch64-fbsd-tdep.h: New file.
2017-09-05Add i386.o to gdb_target_obs for x86_64-* targetsYao Qi1-7/+8
This patch fixes the build failure caused by 22916b0 (Convert the rest x86 target descriptions). gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * configure.tgt (gdb_target_obs): Add i386.o for x86_64-* targets.
2017-09-05Convert the rest x86 target descriptionsYao Qi1-27/+29
This patch changes the rest of x86 target descriptions in GDB and GDBserver. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * amd64-tdep.c (amd64_target_description): Create target descriptions. (_initialize_amd64_tdep): Don't call functions initialize_tdesc_amd64_*. Add self tests. * arch/amd64.c (amd64_create_target_description): Add parameter is_linux. Call set_tdesc_osabi if is_linux is true. * arch/amd64.h (amd64_create_target_description): Update the declaration. * arch/i386.c (i386_create_target_description): Add parameter is_linux. Call set_tdesc_osabi if is_linux is true. * arch/i386.h (i386_create_target_description): Update declaration. * configure.tgt: Add i386.o to gdb_target_obs. * features/Makefile (XMLTOC): Remove i386/*.xml. * features/i386/amd64-avx-avx512.c: Remove. * features/i386/amd64-avx-mpx-avx512-pku.c: Remove. * features/i386/amd64-avx-mpx.c: Remove. * features/i386/amd64-avx.c: Remove. * features/i386/amd64-mpx.c: Remove. * features/i386/amd64.c: Remove. * features/i386/i386-avx-avx512.c: Remove. * features/i386/i386-avx-mpx-avx512-pku.c: Remove. * features/i386/i386-avx-mpx.c: Remove. * features/i386/i386-avx.c: Remove. * features/i386/i386-mmx.c: Remove. * features/i386/i386-mpx.c: Remove. * features/i386/i386.c: Remove. * i386-tdep.c: Don't include features/i386/i386*.c., include target-descriptions.h and arch/i386.h. (i386_target_description): Create target descriptions. (i386_gdbarch_init): Don't call initialize_tdesc_i386_* functions. Do self tests. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * configure.srv (srv_i386_regobj): Remove. (srv_amd64_regobj): Remove. (srv_regobj): Set it to "" for x86 non-linux targets. * linux-x86-tdesc.c (i386_linux_read_description): * lynx-i386-low.c: Include x86-xstate.h and arch/i386.h. (init_registers_i386): Remove the declaration. (tdesc_i386): Remove the declaration. (lynx_i386_arch_setup): Call i386_create_target_description. * nto-x86-low.c: Likewise. * win32-i386-low.c [__x86_64__]: include arch/amd64.h. [!__x86_64__]: include arch/i386.h. (i386_arch_setup) [__x86_64__]: Call amd64_create_target_description.
2017-09-05Convert amd64-linux target descriptionsYao Qi1-1/+1
This patch changes amd64-linux target descriptions so that they can be dynamically generated in both GDB and GDBserver. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * Makefile.in (arch-amd64.o): New rule. * configure.srv: Append arch-amd64.o. * linux-amd64-ipa.c: Include common/x86-xstate.h. (get_ipa_tdesc): Call amd64_linux_read_description. (initialize_low_tracepoint): Don't call init_registers_x32_XXX and init_registers_amd64_XXX. * linux-x86-low.c (x86_linux_read_description): Call amd64_linux_read_description. (x86_get_ipa_tdesc_idx): Call amd64_get_ipa_tdesc_idx. (initialize_low_arch): Don't call init_registers_x32_XXX and init_registers_amd64_XXX. * linux-x86-tdesc-selftest.c: Declare init_registers_amd64_XXX and tdesc_amd64_XXX. [__x86_64__] (amd64_tdesc_test): New function. (initialize_low_tdesc) [__x86_64__]: Call init_registers_x32_XXX and init_registers_amd64_XXX. * linux-x86-tdesc.c: Include arch/amd64.h. (xcr0_to_tdesc_idx): New function. (i386_linux_read_description): New function. (amd64_get_ipa_tdesc_idx): New function. * linux-x86-tdesc.h (amd64_get_ipa_tdesc_idx): Declare. (amd64_get_ipa_tdesc): Declare. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * amd64-linux-tdep.c: Include arch/amd64.h. Don't include features/i386/*.c. (amd64_linux_read_description): Call amd64_create_target_description. * arch/amd64.c: New file. * arch/amd64.h: New file. * configure.tgt (x86_64-*-linux*): Append amd64.o. * Makefile.in (ALL_64_TARGET_OBS): Append amd64.o.
2017-09-05Share i386-linux target description between GDB and GDBserverYao Qi1-2/+3
The code on creating i386-linux target descriptions are quite similar between GDB and GDBserver, so this patch moves them into a shared file arch/i386.c. I didn't name it as i386-linux.c, because I want to reuse it to create other i386 non-linux target descriptions later. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * Makefile.in (ALL_TARGET_OBS): Add i386.o. (SFILES): Add arch/i386.c. (HFILES_NO_SRCDIR): Add arch/i386.h. * arch/i386.c: New file. * arch/i386.h: New file. * arch/tdesc.h (allocate_target_description): Declare. (set_tdesc_architecture): Declare. (set_tdesc_osabi): Declare. * configure.tgt (i[34567]86-*-linux*): Add i386.o. * i386-linux-tdep.c: Don't include ../features/i386/32bit-XXX.c. include arch/i386.h. (i386_linux_read_description): Remove code and call i386_create_target_description. (set_tdesc_architecture): New function. (set_tdesc_osabi): New function. * target-descriptions.h (allocate_target_description): Remove. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * Makefile.in (arch-i386.o): New rule. * configure.srv (i[34567]86-*-linux*): Add arch-i386.o. (x86_64-*-linux*): Likewise. * linux-x86-tdesc.c: Don't include ../features/i386/32bit-XXX.c, include arch/i386.h. (i386_linux_read_description): Remove code and call i386_create_target_description. * tdesc.c (allocate_target_description): New function. * tdesc.h (set_tdesc_architecture): Remove declaration. (set_tdesc_osabi): Likewise.
2017-04-12gdb: Move DJGPP/go32 bits to their own tdep filePedro Alves1-0/+4
I posit that this makes them easier to find. The other day while working on the wchar_t patch, I had a bit of trouble finding the DJGPP/go32 tdep bits. My initial reaction was looking for a go32-specific tdep file, but there's none. Confirmed that a --host=i586-pc-msdosdjgpp GDB still builds successfully and includes the i386-go32-tdep.o object. Confirmed that an --enable-targets=all build of GDB on x86-64 GNU/Linux includes the DJGPP/go32 bits too. gdb/ChangeLog: 2017-04-12 Pedro Alves <palves@redhat.com> * Makefile.in (ALL_TARGET_OBS): Add i386-go32-tdep.o. * configure.tgt: Handle i[34567]86-*-go32* and i[34567]86-*-msdosdjgpp*. * i386-tdep.c (i386_svr4_reg_to_regnum): Make extern. (i386_go32_init_abi, i386_coff_osabi_sniffer): Moved to i386-go32-tdep.c. (_initialize_i386_tdep): DJGPP bits moved to i386-go32-tdep.c. * i386-go32-tdep.c: New file. * i386-tdep.h (tdesc_i386_mmx, i386_svr4_reg_to_regnum): New declarations.
2017-04-04Remove support for using the bsd-uthread target on FreeBSD.John Baldwin1-2/+2
The bsd-uthread target supports an old thread library ("libc_r") that was last included in FreeBSD release 6.4 released in 2008. However, this library has not been used as the default library since FreeBSD 5.0 (2003) and 4.11 (2005). Thread support for modern FreeBSD binaries is provided via "normal" LWP support in core files and the native FreeBSD target. gdb/ChangeLog: * amd64-fbsd-tdep.c: Remove "bsd-uthread.h" include. (amd64fbsd_jmp_buf_reg_offset): Remove. (amd64fbsd_supply_uthread): Remove function. (amd64fbsd_collect_uthread): Remove function. (amd64fbsd_init_abi): Don't set bsd-uthread callbacks. * configure.tgt (i[34567]86-*-freebsd*): Remove bsd-uthread.o. (x86_64-*-freebsd*): Remove bsd-uthread.o. (fbsd-nat.c): Update comment. * i386-fbsd-tdep.c: Remove "bsd-uthread.h" include. (i386fbsd_jmp_buf_reg_offset): Remove. (i386fbsd_supply_uthread): Remove function. (i386fbsd_collect_uthread): Remove function. (i386fbsd_init_abi): Don't set bsd-uthread callbacks.
2017-04-04Remove support for FreeBSD/alpha.John Baldwin1-5/+2
FreeBSD last shipped a release for Alpha (6.3) in 2008. This also removes support for GNU/kFreeBSD on Alpha. gdb/ChangeLog: * Makefile.in (ALL_64_TARGET_OBS): Remove alpha-fbsd-tdep.o. (ALLDEPFILES): Remove alpha-fbsd-tdep.c * NEWS: Mention that support for FreeBSD/alpha was removed. * alpha-fbsd-tdep.c: Delete file. * config/alpha/fbsd.mh: Delete file. * configure.host: Delete alpha*-*-freebsd* and alpha*-*-kfreebsd*-gnu. * configure.tgt: Delete alpha*-*-freebsd* and alpha*-*-kfreebsd*-gnu.
2017-01-04Add FreeBSD/mips architecture.John Baldwin1-0/+5
This has been tested for the n64 and o32 ABIs. Signal frame unwinders for both ABIs are provided. FreeBSD/mips requires custom linkmap offsets since it contains an additional l_off member in 'struct link_map' that other FreeBSD platforms do not have. Support for collecting and supplying general purpose and floating point register sets are provided. Common routines for working with native format register sets are exported for use by the native target. gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add mips-fbsd-tdep.o. (ALLDEPFILES): Add mips-fbsd-tdep.c. * NEWS: Mention new FreeBSD/mips target. * configure.tgt: Add mips*-*-freebsd*. * mips-fbsd-tdep.c: New file. * mips-fbsd-tdep.h: New file. gdb/doc/ChangeLog: * gdb.texinfo (Contributors): Add SRI International and University of Cambridge for FreeBSD/mips.
2016-12-09gdb: Remove support for obsolete OSABIs and a.outPedro Alves1-4/+4
gdb/ChangeLog: 2016-12-09 Pedro Alves <palves@redhat.com> * Makefile.in (ALL_TARGET_OBS): Remove vax-obsd-tdep.o. * alpha-fbsd-tdep.c (_initialize_alphafbsd_tdep): Adjust. * alpha-nbsd-tdep.c: Move comment to _initialize_alphanbsd_tdep. (alphanbsd_core_osabi_sniffer): Delete. (_initialize_alphanbsd_tdep): No longer handle a.out. * alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Adjust. * amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Adjust. * amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Adjust. * amd64-obsd-tdep.c (amd64obsd_supply_regset) (amd64obsd_combined_regset) (amd64obsd_iterate_over_regset_sections, amd64obsd_core_init_abi): Delete. (_initialize_amd64obsd_tdep): Don't handle a.out. * arm-nbsd-nat.c (struct md_core, fetch_core_registers) (arm_netbsd_core_fns): Delete. (_initialize_arm_netbsd_nat): Don't register arm_netbsd_core_fns. * arm-nbsd-tdep.c (arm_netbsd_aout_init_abi) (arm_netbsd_aout_osabi_sniffer): Delete. (_initialize_arm_netbsd_tdep): Don't handle a.out. * arm-obsd-tdep.c (armobsd_core_osabi_sniffer): Delete. (_initialize_armobsd_tdep): Don't handle a.out. * arm-tdep.c (arm_gdbarch_init): Remove bfd_target_aout_flavour case. * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Remove SunOS a.out handling. * configure.tgt (vax-*-netbsd* | vax-*-knetbsd*-gnu): Remove vax-obsd-tdep.o from gdb_target_objs. (vax-*-openbsd*): Likewise. (*-*-freebsd*): Adjust default gdb_osabi. (*-*-openbsd*): Likewise. * dbxread.c (block_address_function_relative): Delete. (dbx_symfile_read): Remove reference to block_address_function_relative. (dbx_symfile_read): Don't call read_dbx_dynamic_symtab. (read_dbx_dynamic_symtab): Delete. (process_one_symbol): Remove references to block_address_function_relative. * defs.h (GDB_OSABI_FREEBSD_AOUT, GDB_OSABI_NETBSD_AOUT): Remove. (GDB_OSABI_FREEBSD_ELF): Rename to ... (GDB_OSABI_FREEBSD): ... this. (GDB_OSABI_NETBSD_ELF): Rename to ... (GDB_OSABI_NETBSD): ... this. (GDB_OSABI_OPENBSD_ELF): Rename to ... (GDB_OSABI_OPENBSD): ... this. (GDB_OSABI_HPUX_ELF, GDB_OSABI_HPUX_SOM): Remove. * fbsd-tdep.c: Adjust comment. * hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Adjust. * hppa-obsd-tdep.c (GDB_OSABI_NETBSD_CORE): Delete. (hppaobsd_core_osabi_sniffer): Delete. (_initialize_hppabsd_tdep): Don't handle a.out. * hppa-tdep.c (hppa_stub_frame_unwind_cache): Don't handle GDB_OSABI_HPUX_SOM. (hppa_gdbarch_init): Likewise. * i386-bsd-tdep.c (i386bsd_aout_osabi_sniffer) (i386bsd_core_osabi_sniffer, _initialize_i386bsd_tdep): Delete. * i386-fbsd-tdep.c (i386fbsdaout_init_abi): Delete. Merge bits with ... (i386fbsd_init_abi): ... this. (_initialize_i386fbsd_tdep): Don't handle a.out. * i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Adjust. * i386-obsd-tdep.c (i386obsd_aout_supply_regset) (i386obsd_aout_gregset) (i386obsd_aout_iterate_over_regset_sections): Delete. (i386obsd_init_abi): Merge with i386obsd_elf_init_abi. (i386obsd_aout_init_abi): Delete. (_initialize_i386obsd_tdep): Don't handle a.out. * m68k-bsd-tdep.c (m68kobsd_sigtramp_cache_init) (m68kobsd_sigtramp): Delete. (m68kbsd_init_abi): Merge with ... (m68kbsd_elf_init_abi): ... this, and delete it. (m68kbsd_aout_init_abi): Delete. (m68kbsd_aout_osabi_sniffer, m68kbsd_core_osabi_sniffer): Delete. (_initialize_m68kbsd_tdep): Don't handle a.out. * mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Adjust. * mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Adjust. * osabi.c (gdb_osabi_names): Remove "a.out" entries. Drop "ELF" suffixes. Remove "HP-UX" entries. (generic_elf_osabi_sniff_abi_tag_sections): Adjust. (generic_elf_osabi_sniffer): No longer handle GDB_OSABI_HPUX_ELF. Adjust. (_initialize_ppcfbsd_tdep): Adjust. * ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Adjust. * ppc-obsd-tdep.c (GDB_OSABI_NETBSD_CORE) (ppcobsd_core_osabi_sniffer): Delete. (_initialize_ppcobsd_tdep): Don't handle a.out. * rs6000-tdep.c (rs6000_gdbarch_init): Adjust. * sh-nbsd-tdep.c (GDB_OSABI_NETBSD_CORE) (shnbsd_core_osabi_sniffer): Delete. (_initialize_shnbsd_tdep): Don't handle a.out. * solib.c (clear_solib): Don't handle SunOS/a.out. * sparc-nbsd-tdep.c (sparc32nbsd_init_abi): Make extern. (sparc32nbsd_aout_init_abi): Delete. (sparc32nbsd_elf_init_abi): Merged into sparc32nbsd_init_abi. (sparcnbsd_aout_osabi_sniffer): Delete. (GDB_OSABI_NETBSD_CORE, sparcnbsd_core_osabi_sniffer): Delete. (_initialize_sparcnbsd_tdep): No longer handle a.out. * sparc-obsd-tdep.c (sparc32obsd_init_abi) (_initialize_sparc32obsd_tdep): Adjust. * sparc-tdep.h (sparc32nbsd_elf_init_abi): Rename to ... (sparc32nbsd_init_abi): ... this. * sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Adjust. * sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Adjust. * sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Adjust. * stabsread.c: Update comment. * symmisc.c (print_objfile_statistics): Don't mention "a.out" in output. * vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Adjust. * vax-obsd-tdep.c: Delete file.
2016-11-23Normalize names of some source filesSimon Marchi1-40/+40
Most tdep/nat files are named: <cpu>-<os>-tdep.c <cpu>-<os>-nat.c A few files do not respect this scheme. This patch renames them so that they are consistent with the rest of the files. It builds fine with --enable-targets=all, but that doesn't test the nat files. I can only hope that my grep skill is good enough. gdb/ChangeLog: * Makefile.in (ALL_64_TARGET_OBS, ALL_TARGET_OBS, HFILES_NO_SRCDIR, ALLDEPFILES): Rename files. * alphabsd-nat.c: Rename to ... * alpha-bsd-nat.c: ... this, adjust include. * alphabsd-tdep.c: Rename to ... * alpha-bsd-tdep.c: ... this, adjust include. * alphabsd-tdep.h: Rename to ... * alpha-bsd-tdep.h: ... this, adjust include barrier and comment. * alphafbsd-tdep.c: Rename to ... * alpha-fbsd-tdep.c: ... this. * alphanbsd-tdep.c: Rename to ... * alpha-nbsd-tdep.c: ... this, adjust include. * alphaobsd-tdep.c: Rename to ... * alpha-obsd-tdep.c: ... this, adjust include. * amd64bsd-nat.c: Rename to ... * amd64-bsd-nat.c: ... this, adjust include. * amd64fbsd-nat.c: Rename to ... * amd64-fbsd-nat.c: ... this, adjust include. * amd64fbsd-tdep.c: Rename to ... * amd64-fbsd-tdep.c: ... this, adjust include. * amd64nbsd-nat.c: Rename to ... * amd64-nbsd-nat.c: ... this. * amd64nbsd-tdep.c: Rename to ... * amd64-nbsd-tdep.c: ... this. * amd64obsd-nat.c: Rename to ... * amd64-obsd-nat.c: ... this. * amd64obsd-tdep.c: Rename to ... * amd64-obsd-tdep.c: ... this. * amd64-tdep.h: Update comments. * armbsd-tdep.c: Rename to ... * arm-bsd-tdep.c: ... this. * armnbsd-nat.c: Rename to ... * arm-nbsd-nat.c: ... this. * armnbsd-tdep.c: Rename to ... * arm-nbsd-tdep.c: ... this. * armobsd-tdep.c: Rename to ... * arm-obsd-tdep.c: ... this. * arm-tdep.h: Update comments. * hppabsd-tdep.c: Rename to ... * hppa-bsd-tdep.c: ... this, adjust include. * hppabsd-tdep.h: Rename to ... * hppa-bsd-tdep.h: ... this, adjust include barrier and comment. * hppanbsd-nat.c: Rename to ... * hppa-nbsd-nat.c: ... this. * hppanbsd-tdep.c: Rename to ... * hppa-nbsd-tdep.c: ... this, adjust include. * hppaobsd-nat.c: Rename to ... * hppa-obsd-nat.c: ... this. * hppaobsd-tdep.c: Rename to ... * hppa-obsd-tdep.c: ... this, adjust include. * i386bsd-nat.c: Rename to ... * i386-bsd-nat.c: ... this, adjust include. * i386bsd-nat.h: Rename to ... * i386-bsd-nat.h: ... this, adjust include barrier and comment. * i386bsd-tdep.c: Rename to ... * i386-bsd-tdep.c: ... this. * i386fbsd-nat.c: Rename to ... * i386-fbsd-nat.c: ... this, adjust include. * i386fbsd-tdep.c: Rename to ... * i386-fbsd-tdep.c: ... this, adjust include. * i386fbsd-tdep.h: Rename to ... * i386-fbsd-tdep.h: ... this, adjust include barrier and comment. * i386gnu-nat.c: Rename to ... * i386-gnu-nat.c: ... this. * i386gnu-tdep.c: Rename to ... * i386-gnu-tdep.c: ... this. * i386nbsd-nat.c: Rename to ... * i386-nbsd-nat.c: ... this, adjust include. * i386nbsd-tdep.c: Rename to ... * i386-nbsd-tdep.c: ... this. * i386obsd-nat.c: Rename to ... * i386-obsd-nat.c: ... this, adjust include. * i386obsd-tdep.c: Rename to ... * i386-obsd-tdep.c: ... this. * i386v4-nat.c: Rename to ... * i386-v4-nat.c: ... this. * i386-tdep.h: Update comments. * m68k-tdep.h: Update comments. * m68kbsd-nat.c: Rename to ... * m68k-bsd-nat.c: ... this. * m68kbsd-tdep.c: Rename to ... * m68k-bsd-tdep.c: ... this. * m68klinux-nat.c: Rename to ... * m68k-linux-nat.c: ... this. * m68klinux-tdep.c: Rename to ... * m68k-linux-tdep.c: ... this. * m88kbsd-nat.c: Rename to ... * m88k-bsd-nat.c: ... this. * mipsnbsd-nat.c: Rename to ... * mips-nbsd-nat.c: ... this, adjust include. * mipsnbsd-tdep.c: Rename to ... * mips-nbsd-tdep.c: ... this, adjust include. * mipsnbsd-tdep.h: Rename to ... * mips-nbsd-tdep.h: ... this, adjust include barrier and comment. * mips64obsd-nat.c: Rename to ... * mips64-obsd-nat.c: ... this. * mips64obsd-tdep.c: Rename to ... * mips64-obsd-tdep.c: ... this. * ppcfbsd-nat.c: Rename to ... * ppc-fbsd-nat.c: ... this, adjust include. * ppcfbsd-tdep.c: Rename to ... * ppc-fbsd-tdep.c: ... this, adjust include. * ppcfbsd-tdep.h: Rename to ... * ppc-fbsd-tdep.h: ... this, adjust include barrier and comment. * ppcnbsd-nat.c: Rename to ... * ppc-nbsd-nat.c: ... this, adjust include. * ppcnbsd-tdep.c: Rename to ... * ppc-nbsd-tdep.c: ... this, adjust include. * ppcnbsd-tdep.h: Rename to ... * ppc-nbsd-tdep.h: ... this, adjust include barrier and comment. * ppcobsd-nat.c: Rename to ... * ppc-obsd-nat.c: ... this, adjust include. * ppcobsd-tdep.c: Rename to ... * ppc-obsd-tdep.c: ... this, adjust include. * ppcobsd-tdep.h: Rename to ... * ppc-obsd-tdep.h: ... this, adjust include barrier and comment. * shnbsd-nat.c: Rename to ... * sh-nbsd-nat.c: ... this. * shnbsd-tdep.c: Rename to ... * sh-nbsd-tdep.c: ... this. * sparcnbsd-nat.c: Rename to ... * sparc-nbsd-nat.c: ... this. * sparcnbsd-tdep.c: Rename to ... * sparc-nbsd-tdep.c: ... this. * sparcobsd-tdep.c: Rename to ... * sparc-obsd-tdep.c: ... this. * sparc64fbsd-nat.c: Rename to ... * sparc64-fbsd-nat.c: ... this. * sparc64fbsd-tdep.c: Rename to ... * sparc64-fbsd-tdep.c: ... this. * sparc64nbsd-nat.c: Rename to ... * sparc64-nbsd-nat.c: ... this. * sparc64nbsd-tdep.c: Rename to ... * sparc64-nbsd-tdep.c: ... this. * sparc64obsd-nat.c: Rename to ... * sparc64-obsd-nat.c: ... this. * sparc64obsd-tdep.c: Rename to ... * sparc64-obsd-tdep.c: ... this. * sparc64-tdep.h: Update comments. * vaxbsd-nat.c: Rename to ... * vax-bsd-nat.c: ... this. * vaxnbsd-tdep.c: Rename to ... * vax-nbsd-tdep.c: ... this. * vaxobsd-tdep.c: Rename to ... * vax-obsd-tdep.c: ... this. * x86bsd-nat.h: Rename to ... * x86-bsd-nat.h: ... this, adjust include barrier and comment. * x86bsd-nat.c: Rename to ... * x86-bsd-nat.c: ... this, adjust include. * configure.tgt: Update renamed files. * config/alpha/fbsd.mh: Update renamed files. * config/alpha/nbsd.mh: Update renamed files. * config/arm/nbsdelf.mh: Update renamed files. * config/djgpp/fnchange.lst: Update renamed files. * config/i386/fbsd.mh: Update renamed files. * config/i386/fbsd64.mh: Update renamed files. * config/i386/i386gnu.mh: Update renamed files. * config/i386/i386sol2.mh: Update renamed files. * config/i386/nbsd64.mh: Update renamed files. * config/i386/nbsdelf.mh: Update renamed files. * config/i386/obsd.mh: Update renamed files. * config/i386/obsd64.mh: Update renamed files. * config/i386/sol2-64.mh: Update renamed files. * config/m68k/linux.mh: Update renamed files. * config/m68k/nbsdelf.mh: Update renamed files. * config/m68k/obsd.mh: Update renamed files. * config/m88k/obsd.mh: Update renamed files. * config/mips/nbsd.mh: Update renamed files. * config/mips/obsd64.mh: Update renamed files. * config/pa/nbsd.mh: Update renamed files. * config/pa/obsd.mh: Update renamed files. * config/powerpc/fbsd.mh: Update renamed files. * config/powerpc/nbsd.mh: Update renamed files. * config/powerpc/obsd.mh: Update renamed files. * config/sh/nbsd.mh: Update renamed files. * config/sparc/fbsd.mh: Update renamed files. * config/sparc/nbsd64.mh: Update renamed files. * config/sparc/nbsdelf.mh: Update renamed files. * config/sparc/obsd64.mh: Update renamed files. * config/vax/nbsdelf.mh: Update renamed files. * config/vax/obsd.mh: Update renamed files.
2016-11-07configure.tgt (x86_64-*-elf*): Remove i386bsd-tdep.o.Doug Evans1-3/+6
gdb/ChangeLog: * configure.tgt (x86_64-*-elf*): Remove i386bsd-tdep.o.
2016-10-20Don't configure gdb for vxworks targetYao Qi1-0/+1
VxWorks support was removed in 2004. commit e84ecc995d6a5e4e9114d3cea61717b8a573afb6 Author: Andrew Cagney <cagney@redhat.com> Date: Sat Nov 13 23:10:02 2004 +0000 2004-11-13 Andrew Cagney <cagney@gnu.org> * configure.tgt: Delete i[34567]86-*-vxworks*, m68*-netx-*, m68*-*-vxworks*, mips*-*-vxworks*, powerpc-*-vxworks*, and sparc-*-vxworks*. * NEWS: Mention that vxworks was deleted. This patch adds *-*-vxworks* in a list of targets GDB doesn't support. gdb: 2016-10-20 Yao Qi <yao.qi@linaro.org> * configure.tgt: Don't configure if target is *-*-vxworks*.
2016-10-12arc: Add support for NewlibAnton Kolesov1-1/+6
Add support for Newlib as an OS/ABI. The only thing that is specific to it relatively to "generic" baremetal target is location of PC register in jump buffer for longjump support. Sniffer uses .ivt section to decide if ELF file is for ARC Newlib or not. gdb/ChangeLog: * arc-newlib-tdep.c: New file. * configure.tgt: Add newlib support for ARC.
2016-09-21arc: New Synopsys ARC portAnton Kolesov1-0/+5
ARC is a family of licensable processors developed by Synopsys. This is an initial patch that doesn't yet support some of the features, that are already available in Synopsys' fork of GDB, namely: * longjmp support * signal frame handling * prologue analysis * Linux targets support * native Linux support ARC cores are configurable and extensible, which means from debugger perspective that some registers and debug capabilities are optional, therefore it is up to the GDB stub to determine exact list of register available on target and supply it to GDB via XML target descriptions. List of registers that is known to GDB and is required is intentionally kept small to simplify requirements to GDB stub and implementation of a GDB client. gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o. (HFILES_NO_SRCDIR): Add arc-tdep.h. (ALLDEPFILES): Add arc-tdep.c. * NEWS: Mention new ARC port. * configure.tgt: Add ARC. * arc-tdep.c: New file. * arc-tdep.h: New file. * features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml. * features/arc-v2.xml: New file. * features/arc-v2.c: New file (generated). * features/arc-arcompact.xml: New file. * features/arc-arcompact.c: New file (generated). gdb/doc/ChangeLog: * gdb.texinfo (Embedded Processors): Document ARC. (Synopsys ARC): New section. (Standard Target Features): Document ARC features. (ARC Features): New section. gdb/testsuite/ChangeLog: * gdb.xml/tdesc-regs.exp: set core-regs for arc*-*-elf32.
2016-06-17gdb: new AndesTech NDS32 portYan-Ting Lin1-0/+5
gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add nds32-tdep.o. (HFILES_NO_SRCDIR): Add nds32-tdep.h. (ALLDEPFILES): Add nds32-tdep.c. * NEWS: Mention new NDS32 port. * configure.tgt: Add NDS32. * nds32-tdep.c: New file. * nds32-tdep.h: New file. * features/Makefile (XMLTOC): Add nds32.xml. * features/nds32-core.xml: New file. * features/nds32-fpu.xml: New file. * features/nds32-system.xml: New file. * features/nds32.c: New file (generated). * features/nds32.xml: New file. gdb/doc/ChangeLog: * gdb.texinfo (Standard Target Features): Document NDS32 features. (NDS32 Features): New Section. gdb/testsuite/ChangeLog: * gdb.base/float.exp: Add target check for nds32*-*-*. * gdb.xml/tdesc-regs.exp: Set core-regs for nds32*-*-*.
2016-03-31Remove support for "target m32rsdi" and "target mips/pmon/ddb/rockhopper/lsi"Pedro Alves1-4/+4
This removes support for: | target | source | |-------------------+-----------------------| | target m32rsdi | gdb/remote-m32r-sdi.c | | target mips | gdb/remote-mips.c | | target pmon | gdb/remote-mips.c | | target ddb | gdb/remote-mips.c | | target rockhopper | gdb/remote-mips.c | | target lsi | gdb/remote-mips.c | That is: - Remote M32R debugging over SDI. - Debugging boards using the MIPS remote debugging protocol over a serial line, PMON, and a few variants. These are the last non-"target remote" remote targets in the tree, if you don't count "target sim". Refs: https://sourceware.org/ml/gdb/2016-03/msg00004.html https://sourceware.org/ml/gdb-patches/2016-03/msg00580.html gdb/ChangeLog: 2016-03-31 Pedro Alves <palves@redhat.com> * NEWS: Mention that support for "target m32rsdi", "target mips", "target pmon", "target ddb", "target rockhopper", and "target lsi" was removed. * Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and remote-mips.o. (ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c. * configure.tgt: Remove all references to remote-m32r-sdi.o and remote-mips.o. * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete function. * mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete declaration. * remote-m32r-sdi.c, remote-mips.c: Delete files. * symfile.c (generic_load, generic_load): Remove comments. gdb/doc/ChangeLog: 2016-03-31 Pedro Alves <palves@redhat.com> * gdb.texinfo (M32R/SDI): Delete node. (MIPS Embedded): Remove references to the MIPS remote debugging protocol, PMON and variants, and the associated commands.
2016-02-26Add aarch64-*-rtems* targetJoel Sherrill1-1/+1
2016-02-26Add x86_64-*-rtems* targetJoel Sherrill1-0/+3
ld/configure.tgt: Also add stanza for x86_64-*-elf.
2016-01-05gdb: score: drop sim file checkMike Frysinger1-3/+0
There has never been a GNU/sim port for the S+Core architecture. It was added to support private code that has (and most likely never will) see the light of day [1]. Punt this as we don't do this for other people. If you want to maintain a proprietary internal build, then that's not really our problem. [1] https://sourceware.org/ml/gdb-patches/2009-03/msg00390.html
generated by cgit v1.1 at 2024-11-20 08:20:38 +0000