aboutsummaryrefslogtreecommitdiff
path: root/gdb/configure.nat
AgeCommit message (Collapse)AuthorFilesLines
2024-03-26Revert "gdb/gdbserver: share some code relating to target description creation"Andrew Burgess1-2/+2
This reverts commit cd9b374ffe372dcaf7e4c15548cf53a301d8dcdd.
2024-03-25gdb/gdbserver: share some code relating to target description creationAndrew Burgess1-2/+2
This commit is part of a series to share more of the x86 target description creation code between GDB and gdbserver. Unlike previous commits which were mostly refactoring, this commit is the first that makes a real change, though that change should mostly be for gdbserver; I've largely adopted the "GDB" way of doing things for gdbserver, and this fixes a real gdbserver bug. On a x86-64 Linux target, running the test: gdb.server/connect-with-no-symbol-file.exp results in two core files being created. Both of these core files are from the inferior process, created after gdbserver has detached. In this test a gdbserver process is started and then, after gdbserver has started, but before GDB attaches, we either delete the inferior executable, or change its permissions so it can't be read. Only after doing this do we attempt to connect with GDB. As GDB connects to gdbserver, gdbserver attempts to figure out the target description so that it can send the description to GDB, this involves a call to x86_linux_read_description. In x86_linux_read_description one of the first things we do is try to figure out if the process is 32-bit or 64-bit. To do this we look up the executable via the thread-id, and then attempt to read the architecture size from the executable. This isn't going to work if the executable has been deleted, or is no longer readable. And so, as we can't read the executable, we default to an i386 target and use an i386 target description. A consequence of using an i386 target description is that addresses are assumed to be 32-bits. Here's an example session that shows the problems this causes. This is run on an x86-64 machine, and the test binary (xx.x) is a standard 64-bit x86-64 binary: shell_1$ gdbserver --once localhost :54321 /tmp/xx.x shell_2$ gdb -q (gdb) set sysroot (gdb) shell chmod 000 /tmp/xx.x (gdb) target remote :54321 Remote debugging using :54321 warning: /tmp/xx.x: Permission denied. 0xf7fd3110 in ?? () (gdb) show architecture The target architecture is set to "auto" (currently "i386"). (gdb) p/x $pc $1 = 0xf7fd3110 (gdb) info proc mappings process 2412639 Mapped address spaces: Start Addr End Addr Size Offset Perms objfile 0x400000 0x401000 0x1000 0x0 r--p /tmp/xx.x 0x401000 0x402000 0x1000 0x1000 r-xp /tmp/xx.x 0x402000 0x403000 0x1000 0x2000 r--p /tmp/xx.x 0x403000 0x405000 0x2000 0x2000 rw-p /tmp/xx.x 0xf7fcb000 0xf7fcf000 0x4000 0x0 r--p [vvar] 0xf7fcf000 0xf7fd1000 0x2000 0x0 r-xp [vdso] 0xf7fd1000 0xf7fd3000 0x2000 0x0 r--p /usr/lib64/ld-2.30.so 0xf7fd3000 0xf7ff3000 0x20000 0x2000 r-xp /usr/lib64/ld-2.30.so 0xf7ff3000 0xf7ffb000 0x8000 0x22000 r--p /usr/lib64/ld-2.30.so 0xf7ffc000 0xf7ffe000 0x2000 0x2a000 rw-p /usr/lib64/ld-2.30.so 0xf7ffe000 0xf7fff000 0x1000 0x0 rw-p 0xfffda000 0xfffff000 0x25000 0x0 rw-p [stack] 0xff600000 0xff601000 0x1000 0x0 r-xp [vsyscall] (gdb) info inferiors Num Description Connection Executable * 1 process 2412639 1 (remote :54321) (gdb) shell cat /proc/2412639/maps 00400000-00401000 r--p 00000000 fd:03 45907133 /tmp/xx.x 00401000-00402000 r-xp 00001000 fd:03 45907133 /tmp/xx.x 00402000-00403000 r--p 00002000 fd:03 45907133 /tmp/xx.x 00403000-00405000 rw-p 00002000 fd:03 45907133 /tmp/xx.x 7ffff7fcb000-7ffff7fcf000 r--p 00000000 00:00 0 [vvar] 7ffff7fcf000-7ffff7fd1000 r-xp 00000000 00:00 0 [vdso] 7ffff7fd1000-7ffff7fd3000 r--p 00000000 fd:00 143904 /usr/lib64/ld-2.30.so 7ffff7fd3000-7ffff7ff3000 r-xp 00002000 fd:00 143904 /usr/lib64/ld-2.30.so 7ffff7ff3000-7ffff7ffb000 r--p 00022000 fd:00 143904 /usr/lib64/ld-2.30.so 7ffff7ffc000-7ffff7ffe000 rw-p 0002a000 fd:00 143904 /usr/lib64/ld-2.30.so 7ffff7ffe000-7ffff7fff000 rw-p 00000000 00:00 0 7ffffffda000-7ffffffff000 rw-p 00000000 00:00 0 [stack] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] (gdb) Notice the difference between the mappings reported via GDB and those reported directly from the kernel via /proc/PID/maps, the addresses of every mapping is clamped to 32-bits for GDB, while the kernel reports real 64-bit addresses. Notice also that the $pc value is a 32-bit value. It appears to be within one of the mappings reported by GDB, but is outside any of the mappings reported from the kernel. And this is where the problem arises. When gdbserver detaches from the inferior we pass the inferior the address from which it should resume. Due to the 32/64 bit confusion we tell the inferior to resume from the 32-bit $pc value, which is not within any valid mapping, and so, as soon as the inferior resumes, it segfaults. If we look at how GDB (not gdbserver) figures out its target description then we see an interesting difference. GDB doesn't try to read the executable. Instead GDB uses ptrace to query the thread's state, and uses this to figure out the if the thread is 32 or 64 bit. If we update gdbserver to do it the "GDB" way then the above problem is resolved, gdbserver now sees the process as 64-bit, and when we detach from the inferior we give it the correct 64-bit address, and the inferior no longer segfaults. Now, I could just update the gdbserver code, but better, I think, to share one copy of the code between GDB and gdbserver in gdb/nat/. That is what this commit does. The cores of x86_linux_read_description from gdbserver and x86_linux_nat_target::read_description from GDB are moved into a new file gdb/nat/x86-linux-tdesc.c and combined into a single function x86_linux_tdesc_for_tid which is called from each location. This new function does things the GDB way, the only changes are to allow for the sharing; we now have a callback function to call the first time that the xcr0 state is read, this allows for GDB and gdbserver to perform their own initialisation as needed, and additionally, the new function takes a pointer for where to cache the xcr0 value, this isn't needed for this commit, but will be useful in a later commit where gdbserver will want to read this cached xcr0 value. Another thing to note about this commit is how the functions i386_linux_read_description and amd64_linux_read_description are handled. For now I've left these function as implemented separately in GDB and gdbserver. I've moved the declarations of these functions into gdb/nat/x86-linux-tdesc.h, but the implementations are left as separate. A later commit in this series will make these functions shared too, but doing this is not trivial, so I've left that for a separate commit. Merging the declarations as I've done here ensures that everyone implements the function to the same API, and once these functions are shared (in a later commit) we'll want a shared declaration anyway. Approved-By: John Baldwin <jhb@FreeBSD.org>
2024-01-12Update copyright year range in header of all files managed by GDBAndrew Burgess1-1/+1
This commit is the result of the following actions: - Running gdb/copyright.py to update all of the copyright headers to include 2024, - Manually updating a few files the copyright.py script told me to update, these files had copyright headers embedded within the file, - Regenerating gdbsupport/Makefile.in to refresh it's copyright date, - Using grep to find other files that still mentioned 2023. If these files were updated last year from 2022 to 2023 then I've updated them this year to 2024. I'm sure I've probably missed some dates. Feel free to fix them up as you spot them.
2023-10-04refactor: Rename SVE-specific filesLuis Machado1-1/+1
In preparation to the SME support patches, rename the SVE-specific files to something a bit more meaningful that can be shared with the SME code. In this case, I've renamed the "sve" in the names to "scalable". No functional changes. Regression-tested on aarch64-linux Ubuntu 22.04/20.04. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
2023-08-28gdb: Support XSAVE layouts for the current host in the Linux x86 targets.John Baldwin1-1/+2
Note that this uses the CPUID instruction to determine the total size of the XSAVE register set. If there is a way to fetch the register set size using ptrace that would probably be better. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-08-28gdb: Support XSAVE layouts for the current host in the FreeBSD x86 targets.John Baldwin1-2/+3
Use the CPUID instruction to fetch the offsets of supported state components. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-01-01Update copyright year range in header of all files managed by GDBJoel Brobecker1-1/+1
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023.
2022-03-22Add support for hardware breakpoints/watchpoints on FreeBSD/Aarch64.John Baldwin1-1/+2
This shares aarch64-nat.c and nat/aarch64-hw-point.c with the Linux native target. Since FreeBSD writes all of the debug registers in one ptrace op, use an unordered_set<> to track the "dirty" state for threads rather than bitmasks of modified registers.
2022-03-22aarch64: Add an aarch64_nat_target mixin class.John Baldwin1-1/+1
This class includes platform-independent target methods for hardware breakpoints and watchpoints using routines from nat/aarch64-hw-point.c. stopped_data_address is not platform-independent since the FAR register holding the address for a breakpoint hit must be fetched in a platform-specific manner. However, aarch64_stopped_data_address is provided as a helper routine which performs platform-independent validation given the value of the FAR register. For tracking the per-process debug register mirror state, use an unordered_map indexed by pid as recently adopted in x86-nat.c rather than a manual linked-list.
2022-03-22nat: Split out platform-independent aarch64 debug register support.John Baldwin1-1/+2
Move non-Linux-specific support for hardware break/watchpoints from nat/aarch64-linux-hw-point.c to nat/aarch64-hw-point.c. Changes beyond a simple split of the code are: - aarch64_linux_region_ok_for_watchpoint and aarch64_linux_any_set_debug_regs_state renamed to drop linux_ as they are not platform specific. - Platforms must implement the aarch64_notify_debug_reg_change function which is invoked from the platform-independent code when a debug register changes for a given debug register state. This does not use the indirection of a 'low' structure as is done for x86. - The handling for kernel_supports_any_contiguous_range is not pristine. For non-Linux it is simply defined to true. Some uses of this could perhaps be implemented as new 'low' routines for the various places that check it instead? - Pass down ptid into aarch64_handle_breakpoint and aarch64_handle_watchpoint rather than using current_lwp_ptid which is only defined on Linux. In addition, pass the ptid on to aarch64_notify_debug_reg_change instead of the unused state argument.
2022-03-22x86-fbsd-nat: Copy debug register state on fork.John Baldwin1-2/+2
Use the FreeBSD native target low_new_fork hook to copy the per-process debug state from the parent to the child on fork.
2022-02-11gdb: LoongArch: Add Makefile, configure and NEWSTiezhu Yang1-0/+4
This commit adds Makefile, configure and NEWS for LoongArch. Signed-off-by: Zhensong Liu <liuzhensong@loongson.cn> Signed-off-by: Qing zhang <zhangqing@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
2022-01-28FreeBSD x86 nat: Use register maps for GP register sets.John Baldwin1-2/+2
Rather than using the x86-specific register offset tables, use register maps to describe the layout of the general purpose registers fetched via PT_GETREGS. The sole user-visible difference is that FreeBSD/amd64 will now report additional segment registers ($ds, $es, $fs, and $gs) for both 32-bit and 64-bit processes. As part of these changes, the FreeBSD x86 native targets no longer use amd64-bsd-nat.c or i386-bsd-nat.c. Remove FreeBSD-specific register handling (for $fs_base, $gs_base, and XSAVE state) from these files. Similarly, remove the global x86bsd_xsave_len from x86-bsd-nat.c. The FreeBSD x86 native targets use a static xsave_len instead. While here, rework the probing of PT_GETXMMREGS on FreeBSD/i386. Probe the ptrace op once in the target read_description method and cache the result for the future similar to the way the status of XSAVE support is probed in the read_description method. In addition, return the proper xcr0 mask (X87-only) for old kernels or systems without either XSAVE or XMM support.
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker1-1/+1
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-11-18gdb: rename rs6000-nat.c to rs6000-aix-nat.cSimon Marchi1-1/+1
This file seems to be AIX-specific, according to its contents and configure.nat. Rename it to rs6000-aix-nat.c, to make that clear (and to follow the convention). Change-Id: Ib418dddc6b79b2e28f64431121742b5e87f5f4f5
2021-10-29gdb: or1k: add native linux supportStafford Horne1-0/+4
This patch adds support for running gdb natively on OpenRISC linux. Debugging support is provided via the linux PTRACE interface which is mostly handled by GDB genric code. This patch provides the logic of how to read and write the ptrace registers between linux and GDB. Single stepping is privided in a separate patch.
2021-07-29Don't compile x86 debug register support on OpenBSD.John Baldwin1-3/+2
Simon Marchi tried gdb on OpenBSD, and it immediately segfaults when running a program. Simon tracked down the problem to x86_dr_low.get_status being nullptr at this point: (lldb) print x86_dr_low.get_status (unsigned long (*)()) $0 = 0x0000000000000000 (lldb) bt * thread #1, stop reason = step over * frame #0: 0x0000033b64b764aa gdb`x86_dr_stopped_data_address(state=0x0000033d7162a310, addr_p=0x00007f7ffffc5688) at x86-dregs.c:645:12 frame #1: 0x0000033b64b766de gdb`x86_dr_stopped_by_watchpoint(state=0x0000033d7162a310) at x86-dregs.c:687:10 frame #2: 0x0000033b64ea5f72 gdb`x86_stopped_by_watchpoint() at x86-nat.c:206:10 frame #3: 0x0000033b64637fbb gdb`x86_nat_target<obsd_nat_target>::stopped_by_watchpoint(this=0x0000033b65252820) at x86-nat.h:100:12 frame #4: 0x0000033b64d3ff11 gdb`target_stopped_by_watchpoint() at target.c:468:46 frame #5: 0x0000033b6469b001 gdb`watchpoints_triggered(ws=0x00007f7ffffc61c8) at breakpoint.c:4790:32 frame #6: 0x0000033b64a8bb8b gdb`handle_signal_stop(ecs=0x00007f7ffffc61a0) at infrun.c:6072:29 frame #7: 0x0000033b64a7e3a7 gdb`handle_inferior_event(ecs=0x00007f7ffffc61a0) at infrun.c:5694:7 frame #8: 0x0000033b64a7c1a0 gdb`fetch_inferior_event() at infrun.c:4090:5 frame #9: 0x0000033b64a51921 gdb`inferior_event_handler(event_type=INF_REG_EVENT) at inf-loop.c:41:7 frame #10: 0x0000033b64a827c9 gdb`infrun_async_inferior_event_handler(data=0x0000000000000000) at infrun.c:9384:3 frame #11: 0x0000033b6465bd4f gdb`check_async_event_handlers() at async-event.c:335:4 frame #12: 0x0000033b65070917 gdb`gdb_do_one_event() at event-loop.cc:216:10 frame #13: 0x0000033b64af0db1 gdb`start_event_loop() at main.c:421:13 frame #14: 0x0000033b64aefe9a gdb`captured_command_loop() at main.c:481:3 frame #15: 0x0000033b64aed5c2 gdb`captured_main(data=0x00007f7ffffc6470) at main.c:1353:4 frame #16: 0x0000033b64aed4f2 gdb`gdb_main(args=0x00007f7ffffc6470) at main.c:1368:7 frame #17: 0x0000033b6459d787 gdb`main(argc=5, argv=0x00007f7ffffc6518) at gdb.c:32:10 frame #18: 0x0000033b6459d521 gdb`___start + 321 On BSDs, get_status is set in _initialize_x86_bsd_nat, but only if HAVE_PT_GETDBREGS is defined. PT_GETDBREGS doesn't exist on OpenBSD, so get_status (and the other fields of x86_dr_low) are left as nullptr. OpenBSD doesn't support getting or setting the x86 debug registers, so fix by omitting debug register support entirely on OpenBSD: - Change x86bsd_nat_target to only inherit from x86_nat_target if PT_GETDBREGS is supported. - Don't include x86-nat.o and nat/x86-dregs.o for OpenBSD/amd64. They were already omitted for OpenBSD/i386.
2021-03-24AArch64: Implement memory tagging target methods for AArch64Luis Machado1-1/+2
The patch implements the memory tagging target hooks for AArch64, so we can handle MTE. gdb/ChangeLog: 2021-03-24 Luis Machado <luis.machado@linaro.org> * Makefile.in (ALL_64_TARGET_OBS): Add arch/aarch64-mte-linux.o. (HFILES_NO_SRCDIR): Add arch/aarch64-mte-linux.h and nat/aarch64-mte-linux-ptrace.h. * aarch64-linux-nat.c: Include nat/aarch64-mte-linux-ptrace.h. (aarch64_linux_nat_target) <supports_memory_tagging>: New method override. <fetch_memtags>: New method override. <store_memtags>: New method override. (aarch64_linux_nat_target::supports_memory_tagging): New method. (aarch64_linux_nat_target::fetch_memtags): New method. (aarch64_linux_nat_target::store_memtags): New method. * arch/aarch64-mte-linux.c: New file. * arch/aarch64-mte-linux.h: Include gdbsupport/common-defs.h. (AARCH64_MTE_GRANULE_SIZE): Define. (aarch64_memtag_type): New enum. (aarch64_mte_get_tag_granules): New prototype. * configure.nat (NATDEPFILES): Add nat/aarch64-mte-linux-ptrace.o. * configure.tgt (aarch64*-*-linux*): Add arch/aarch64-mte-linux.o. * nat/aarch64-mte-linux-ptrace.c: New file. * nat/aarch64-mte-linux-ptrace.h: New file.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker1-1/+1
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-12-22gdb: Add native support for ARC in GNU/LinuxAnton Kolesov1-0/+4
With this patch in place it is possible to build a GDB that can run on ARC (GNU/Linux) hosts for debugging ARC targets. The "arc-linux-nat.c" is a rather small one that mostly deals with registers and a few thread related hooks. v2 [1]: - Remove "void" from the input of "_initialize_arc_linux_nat ()" [1] Tom's remark after the first patch https://sourceware.org/pipermail/gdb-patches/2020-November/173223.html gdb/ChangeLog: * Makefile.in (ALLDEPFILES): Add arc-linux-nat.c. * configure.host (host to gdb names): Add arc*-*-linux*. * configure.nat (gdb_host_cpu): Add arc. * arc-linux-nat.c: New.
2020-10-13Normalize names of the NetBSD filesKamil Rytarowski1-11/+11
The files used to be named 'nbsd', which incorrectly reflects the name of the OS and confuses it with other BSD derived OSes. gdb/ChangeLog: * Makefile.in (ALL_64_TARGET_OBS, ALL_TARGET_OBS) HFILES_NO_SRCDIR, ALLDEPFILES): Rename files. * alpha-bsd-nat.c: Adjust include. * alpha-bsd-tdep.h: Adjust comment. * alpha-nbsd-tdep.c: Rename to ... * alpha-netbsd-tdep.c: ... this, adjust include. * amd64-nbsd-nat.c: Rename to ... * amd64-netbsd-nat.c: ... this, adjust include. * amd64-nbsd-tdep.c: Rename to ... * amd64-netbsd-tdep.c: ... this, adjust include. * amd64-tdep.h: Adjust include. * arm-nbsd-nat.c: Rename to ... * arm-netbsd-nat.c: ... this, adjust include. * arm-nbsd-tdep.c: Rename to ... * arm-netbsd-tdep.c: ... this, adjust include. * arm-nbsd-tdep.h: Rename to ... * arm-netbsd-tdep.h: ... this, adjust include. * configure.nat: Adjust file lists. * configure.tgt: Likewise. * hppa-nbsd-nat.c: Rename to ... * hppa-netbsd-nat.c: ... this, adjust include. * hppa-nbsd-tdep.c: Rename to ... * hppa-netbsd-tdep.c: ... this, adjust include. * i386-nbsd-nat.c: Rename to ... * i386-netbsd-nat.c: ... this, adjust include. * i386-nbsd-tdep.c: Rename to ... * i386-netbsd-tdep.c: ... this, adjust include. * m68k-bsd-nat.c: Adjust include. * mips-nbsd-nat.c: Rename to ... * mips-netbsd-nat.c: ... this, adjust include. * mips-nbsd-tdep.c: Rename to ... * mips-netbsd-tdep.c: ... this, adjust include. * mips-nbsd-tdep.h: Rename to ... * mips-netbsd-tdep.h: ... this. * nbsd-nat.c: Rename to ... * netbsd-nat.c: ... this, adjust include. * nbsd-nat.h: Rename to ... * netbsd-nat.h: ... this, adjust include. * nbsd-tdep.c: Rename to ... * netbsd-tdep.c: ... this, adjust include. * nbsd-tdep.h: Rename to ... * netbsd-tdep.h: ... this. * ppc-nbsd-nat.c: Rename to ... * ppc-netbsd-nat.c: ... this, adjust include. * ppc-nbsd-tdep.c: Rename to ... * ppc-netbsd-tdep.c: ... this, adjust include and comment. * ppc-nbsd-tdep.h: Rename to ... * ppc-netbsd-tdep.h: ... this. * sh-nbsd-nat.c: Rename to ... * sh-netbsd-nat.c: ... this, adjust include. * sh-nbsd-tdep.c: Rename to ... * sh-netbsd-tdep.c: ... this, adjust include. * sparc-nbsd-nat.c: Rename to ... * sparc-netbsd-nat.c: ... this. * sparc-nbsd-tdep.c: Rename to ... * sparc-netbsd-tdep.c: ... this, adjust include. * sparc64-nbsd-nat.c: Rename to ... * sparc64-netbsd-nat.c: ... this. * sparc64-nbsd-tdep.c: Rename to ... * sparc64-netbsd-tdep.c: ... this, adjust include. * sparc64-tdep.h: Adjust comment. * vax-bsd-nat.c: Adjust include. * vax-nbsd-tdep.c: Rename to ... * vax-netbsd-tdep.c: ... this, adjust include.
2020-09-10Build nat/netbsd-nat.o for the NetBSD native targetKamil Rytarowski1-1/+1
gdb/ChangeLog: * configure.nat (NATDEPFILES): Add nat/netbsd-nat.o when needed.
2020-04-08Share Windows thread-suspend and -resume codeTom Tromey1-2/+2
This adds "suspend" and "resume" methods to windows_thread_info, and changes gdb and gdbserver to share this code. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (thread_rec): Use windows_thread_info::suspend. (windows_continue): Use windows_continue::resume. * nat/windows-nat.h (struct windows_thread_info) <suspend, resume>: Declare new methods. * nat/windows-nat.c: New file. * configure.nat (NATDEPFILES): Add nat/windows-nat.o when needed. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (win32_require_context, suspend_one_thread): Use windows_thread_info::suspend. (continue_one_thread): Use windows_thread_info::resume. * configure.srv (srv_tgtobj): Add windows-nat.o when needed.
2020-03-04Implement debugging of WOW64 processesHannes Domani1-2/+2
For WOW64 processes, the Wow64* variants of SuspendThread, GetThreadContext, SetThreadContext, and GetThreadSelectorEntry have to be used instead. And instead of EnumProcessModules, EnumProcessModulesEx with LIST_MODULES_32BIT is necessary. gdb/ChangeLog: 2020-03-04 Hannes Domani <ssbssa@yahoo.de> * NEWS: Mention support for WOW64 processes. * amd64-windows-nat.c (amd64_mappings): Rename and remove static. (amd64_windows_segment_register_p): Remove static. (_initialize_amd64_windows_nat): Update. * configure.nat <windows> (NATDEPFILES): Add i386-windows-nat.o. * i386-windows-nat.c (context_offset): Update. (i386_mappings): Rename and remove static. (i386_windows_segment_register_p): Remove static. (_initialize_i386_windows_nat): Update. * windows-nat.c (STATUS_WX86_BREAKPOINT): New macro. (STATUS_WX86_SINGLE_STEP): New macro. (EnumProcessModulesEx): New macro. (Wow64SuspendThread): New macro. (Wow64GetThreadContext): New macro. (Wow64SetThreadContext): New macro. (Wow64GetThreadSelectorEntry): New macro. (windows_set_context_register_offsets): Add static. (windows_set_segment_register_p): Likewise. (windows_add_thread): Adapt for WOW64 processes. (windows_fetch_one_register): Likewise. (windows_nat_target::fetch_registers): Likewise. (windows_store_one_register): Likewise. (display_selector): Likewise. (display_selectors): Likewise. (handle_exception): Likewise. (windows_continue): Likewise. (windows_nat_target::resume): Likewise. (windows_add_all_dlls): Likewise. (do_initial_windows_stuff): Likewise. (windows_nat_target::attach): Likewise. (windows_get_exec_module_filename): Likewise. (windows_nat_target::create_inferior): Likewise. (windows_xfer_siginfo): Likewise. (_initialize_loadable): Initialize Wow64SuspendThread, Wow64GetThreadContext, Wow64SetThreadContext, Wow64GetThreadSelectorEntry and EnumProcessModulesEx. * windows-nat.h (windows_set_context_register_offsets): Remove declaration. (windows_set_segment_register_p): Likewise. (i386_windows_segment_register_p): Add declaration. (amd64_windows_segment_register_p): Likewise.
2020-02-05RISC-V/Linux/native: Factor out target description determinationMaciej W. Rozycki1-1/+2
In preparation for RISC-V/Linux `gdbserver' support factor out parts of native target description determination code that can be shared between the programs. gdb/ * nat/riscv-linux-tdesc.h: New file. * nat/riscv-linux-tdesc.c: New file, taking code from... * riscv-linux-nat.c (riscv_linux_nat_target::read_description): ... here. * configure.nat <linux> <riscv*>: Add nat/riscv-linux-tdesc.o to NATDEPFILES.
2020-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files.
2019-12-04Fix (most) OpenBSD link errorsChristian Biesinger1-2/+3
This fixes these errors: ld: error: undefined symbol: x86_stopped_by_hw_breakpoint() >>> referenced by x86-nat.h:109 (../../gdb/x86-nat.h:109) >>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::stopped_by_hw_breakpoint()) ld: error: undefined symbol: x86_can_use_hw_breakpoint(bptype, int, int) >>> referenced by x86-nat.h:76 (../../gdb/x86-nat.h:76) >>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::can_use_hw_breakpoint(bptype, int, int)) ld: error: undefined symbol: x86_insert_hw_breakpoint(gdbarch*, bp_target_info*) >>> referenced by x86-nat.h:93 (../../gdb/x86-nat.h:93) >>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::insert_hw_breakpoint(gdbarch*, bp_target_info*)) ld: error: undefined symbol: x86_remove_hw_breakpoint(gdbarch*, bp_target_info*) >>> referenced by x86-nat.h:97 (../../gdb/x86-nat.h:97) >>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::remove_hw_breakpoint(gdbarch*, bp_target_info*)) ld: error: undefined symbol: x86_remove_watchpoint(unsigned long, int, target_hw_bp_type, expression*) >>> referenced by x86-nat.h:89 (../../gdb/x86-nat.h:89) >>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::remove_watchpoint(unsigned long, int, target_hw_bp_type, expression*)) ld: error: undefined symbol: x86_insert_watchpoint(unsigned long, int, target_hw_bp_type, expression*) >>> referenced by x86-nat.h:84 (../../gdb/x86-nat.h:84) >>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::insert_watchpoint(unsigned long, int, target_hw_bp_type, expression*)) ld: error: undefined symbol: x86_stopped_by_watchpoint() >>> referenced by x86-nat.h:100 (../../gdb/x86-nat.h:100) >>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::stopped_by_watchpoint()) ld: error: undefined symbol: x86_stopped_data_address(unsigned long*) >>> referenced by x86-nat.h:103 (../../gdb/x86-nat.h:103) >>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::stopped_data_address(unsigned long*)) ld: error: undefined symbol: x86_region_ok_for_hw_watchpoint(unsigned long, int) >>> referenced by x86-nat.h:79 (../../gdb/x86-nat.h:79) >>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::region_ok_for_hw_watchpoint(unsigned long, int)) and ld: error: undefined symbol: x86_dr_insert_watchpoint(x86_debug_reg_state*, target_hw_bp_type, unsigned long, int) >>> referenced by x86-nat.c:156 (../../gdb/x86-nat.c:156) >>> x86-nat.o:(x86_insert_watchpoint(unsigned long, int, target_hw_bp_type, expression*)) ld: error: undefined symbol: x86_dr_remove_watchpoint(x86_debug_reg_state*, target_hw_bp_type, unsigned long, int) >>> referenced by x86-nat.c:169 (../../gdb/x86-nat.c:169) >>> x86-nat.o:(x86_remove_watchpoint(unsigned long, int, target_hw_bp_type, expression*)) ld: error: undefined symbol: x86_dr_region_ok_for_watchpoint(x86_debug_reg_state*, unsigned long, int) >>> referenced by x86-nat.c:181 (../../gdb/x86-nat.c:181) >>> x86-nat.o:(x86_region_ok_for_hw_watchpoint(unsigned long, int)) ld: error: undefined symbol: x86_dr_stopped_data_address(x86_debug_reg_state*, unsigned long*) >>> referenced by x86-nat.c:194 (../../gdb/x86-nat.c:194) >>> x86-nat.o:(x86_stopped_data_address(unsigned long*)) ld: error: undefined symbol: x86_dr_stopped_by_watchpoint(x86_debug_reg_state*) >>> referenced by x86-nat.c:206 (../../gdb/x86-nat.c:206) >>> x86-nat.o:(x86_stopped_by_watchpoint()) ld: error: undefined symbol: x86_dr_insert_watchpoint(x86_debug_reg_state*, target_hw_bp_type, unsigned long, int) >>> referenced by x86-nat.c:219 (../../gdb/x86-nat.c:219) >>> x86-nat.o:(x86_insert_hw_breakpoint(gdbarch*, bp_target_info*)) ld: error: undefined symbol: x86_dr_remove_watchpoint(x86_debug_reg_state*, target_hw_bp_type, unsigned long, int) >>> referenced by x86-nat.c:233 (../../gdb/x86-nat.c:233) >>> x86-nat.o:(x86_remove_hw_breakpoint(gdbarch*, bp_target_info*)) ld: error: undefined symbol: x86_dr_stopped_by_hw_breakpoint(x86_debug_reg_state*) >>> referenced by x86-nat.c:269 (../../gdb/x86-nat.c:269) >>> x86-nat.o:(x86_stopped_by_hw_breakpoint()) It does not fix: ld: error: can't create dynamic relocation R_X86_64_64 against symbol: __gmp_binvert_limb_table in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output >>> defined in /usr/local/lib/libgmp.a(mp_minv_tab.o) >>> referenced by tmp-dive_1.s >>> dive_1.o:(__gmpn_divexact_1) in archive /usr/local/lib/libgmp.a ld: error: can't create dynamic relocation R_X86_64_64 against symbol: __gmp_binvert_limb_table in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output >>> defined in /usr/local/lib/libgmp.a(mp_minv_tab.o) >>> referenced by tmp-bdiv_q_1.s >>> bdiv_q_1.o:(__gmpn_bdiv_q_1) in archive /usr/local/lib/libgmp.a ld: error: can't create dynamic relocation R_X86_64_64 against symbol: __gmpn_invert_limb_table in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output >>> defined in /usr/local/lib/libgmp.a(invert_limb_table.o) >>> referenced by tmp-invert_limb.s >>> invert_limb.o:(__gmpn_invert_limb) in archive /usr/local/lib/libgmp.a gdb/ChangeLog: 2019-12-04 Christian Biesinger <cbiesinger@google.com> * configure.nat (obsd64): Add missing files x86-nat.o and nat/x86-dregs.o. Change-Id: I4a443c0cf805efd7b45feaabd729a01b07772724
2019-09-20Remove Cell Broadband Engine debugging supportUlrich Weigand1-17/+0
This patch implements removal of Cell/B.E. support, including - Support for the spu-*-* target - Support for native stand-alone SPU debugging - Support for integrated debugging of combined PPU/SPU applications - Remote debugging (gdbserver) support for all the above. The patch also removes the TARGET_OBJECT_SPU target object type, as this is available only on Cell/B.E. targets, including - Native Linux support - Core file support (including core file generation) - Remote target support, including removal of the qXfer:spu:read and qXfer:spu:write remote protocal packets and associated support in gdbserver. gdb/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * NEWS: Mention that Cell/B.E. debugging support was removed. * MAINTAINERS: Remove spu target. * config/djgpp/fnchange.lst: Remove entries for removed files. * Makefile.in (ALL_TARGET_OBS): Remove solib-spu.o, spu-multiarch.o, and spu-tdep.o. (HFILES_NO_SRCDIR): Remove solib-spu.h and spu-tdep.h. (ALLDEPFILES): Remove solib-spu.c, spu-linux-nat.c, spu-multiarch.c, and spu-tdep.c. * spu-linux-nat.c: Remove file. * spu-multiarch.c: Remove file. * spu-tdep.c: Remove file. * spu-tdep.h: Remove file. * solib-spu.c: Remove file. * solib-spu.h: Remove file. * configure.host (powerpc64*-*-linux*): Remove Cell/B.E. support. * configure.nat (spu-linux): Remove. * configure.tgt (powerpc*-*-linux*): Remove solib-spu.o and solib-multiarch.o from gdb_target_obs. (spu*-*-*): Remove. * arch/ppc-linux-common.h (struct ppc_linux_features): Remove "cell" feature flag. (ppc_linux_no_features): Update. * arch/ppc-linux-common.c (ppc_linux_match_description): Remove Cell/B.E. support. * arch/ppc-linux-tdesc.h (tdesc_powerpc_cell32l): Remove declaration. (tdesc_powerpc_cell64l): Likewise. * nat/ppc-linux.h (PPC_FEATURE_CELL): Remove. * ppc-linux-nat.c (ppc_linux_nat_target::read_description): Remove Cell/B.E. support. * ppc-linux-tdep.h: Do not include "solib-spu.h" or "spu-tdep.h". Do not include "features/rs6000/powerpc-cell32l.c" or "features/rs6000/powerpc-cell64l.c". (ppc_linux_spu_section): Remove. (ppc_linux_core_read_description): Remove Cell/B.E. support. (spe_context_objfile, spe_context_lm_addr, spe_context_offset, spe_context_cache_ptid, spe_context_cache_ptid): Remove. (ppc_linux_spe_context_lookup): Remove. (ppc_linux_spe_context_inferior_created): Remove. (ppc_linux_spe_context_solib_loaded): Remove. (ppc_linux_spe_context_solib_unloaded): Remove. (ppc_linux_spe_context): Remove. (struct ppu2spu_cache): Remove. (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register): Remove. (struct ppu2spu_data): Remove. (ppu2spu_unwind_register, ppu2spu_sniffer, ppu2spu_dealloc_cache, ppu2spu_unwind): Remove. (ppc_linux_init_abi): Remove Cell/B.E. support. * rs6000-tdep.h (rs6000_gdbarch_init): Remove Cell/B.E. support. * features/Makefile (rs6000/powerpc-cell32l-expedite): Remove. (rs6000/powerpc-cell64l-expedite): Likewise (WHICH): Remove rs6000/powerpc-cell32l and rs6000/powerpc-cell64l. (XMLTOC): Remove rs6000/powerpc-cell32l.xml and rs6000/powerpc-cell64l.xml. * features/rs6000/powerpc-cell32l.xml: Remove. * features/rs6000/powerpc-cell64l.xml: Likewise. * features/rs6000/powerpc-cell32l.c: Remove generated file. * features/rs6000/powerpc-cell64l.c: Likewise. * regformats/rs6000/powerpc-cell32l.dat: Remove generated file. * regformats/rs6000/powerpc-cell64l.dat: Likewise. * regformats/reg-spu.dat: Remove. * target.h (enum target_object): Remove TARGET_OBJECT_SPU. * corelow.c (struct spuid_list): Remove. (add_to_spuid_list): Remove. (core_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * remote.c (PACKET_qXfer_spu_read, PACKET_qXfer_spu_write): Remove. (remote_protocol_features): Remove associated entries. (_initialize_remote): No longer initialize them. (remote_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * linux-nat.c (SPUFS_MAGIC): Remove. (linux_proc_xfer_spu): Remove. (spu_enumerate_spu_ids): Remove. (linux_nat_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * linux-tdep.c (-linux_spu_make_corefile_notes): Remove. (linux_make_corefile_notes): No longer call it. * regcache.c (cooked_read_test): Remove bfd_arch_spu special case. (cooked_write_test): Likewise. gdb/doc/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * doc/gdb.texinfo (Remote Configuration): Remove documentation for qXfer:spu:read and qXfer:spu:write. (General Query Packets): Likewise. (Cell Broadband Engine SPU architecture): Remove subsection. gdb/gdbserver/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * configure.srv (ipa_ppc_linux_regobj): Remove powerpc-cell32l-ipa.o and powerpc-cell64l-ipa.o. (powerpc*-*-linux*): Remove powerpc-cell32l.o and powerpc-cell64l.o from srv_regobj. Remove rs6000/powerpc-cell32l.xml and rs6000/powerpc-cell64l.xml from srv_xmlfiles. (spu*-*-*): Remove. * spu-low.c: Remove file. * linux-ppc-low.c (INSTR_SC, NR_spu_run): Remove. (parse_spufs_run): Remove. (ppc_get_pc): Remove Cell/B.E. support. (ppc_set_pc): Likewise. (ppc_breakpoint_at): Likewise. (ppc_arch_setup): Likewise. (ppc_get_ipa_tdesc_idx): Do not handle tdesc_powerpc_cell64l or tdesc_powerpc_cell32l. (initialize_low_arch): Do not call init_registers_powerpc_cell64l or init_registers_powerpc_cell32l. * linux-ppc-ipa.c (get_ipa_tdesc): Do not handle PPC_TDESC_CELL. (initialize_low_tracepoint): Do not call init_registers_powerpc_cell64l or init_registers_powerpc_cell32l. * linux-ppc-tdesc-init.h (PPC_TDESC_CELL): Mark as unused. (init_registers_powerpc_cell32l): Remove prototype. (init_registers_powerpc_cell64l): Likewise. * target.h (struct target_ops): Remove qxfer_spu member. * server.c (handle_qxfer_spu): Remove. (qxfer_packets): Remove entry for "spu". (handle_query): No longer support qXfer:spu:read or qXfer:spu:write. * linux-low.c (SPUFS_MAGIC): Remove. (spu_enumerate_spu_ids): Remove. (linux_qxfer_spu): Remove. (linux_target_ops): Remove qxfer_spu member. * lynx-low.c (lynx_target_ops): Remove qxfer_spu member. * nto-low.c (nto_target_ops): Remove qxfer_spu member. * win32-low.c (win32_target_ops): Remove qxfer_spu member. gdb/testsuite/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * gdb.arch/spu-info.exp: Remove file. * gdb.arch/spu-info.c: Remove file. * gdb.arch/spu-ls.exp: Remove file. * gdb.arch/spu-ls.c: Remove file. * gdb.asm/asm-source.exp: Remove support for spu*-*-*. * gdb.asm/spu.inc: Remove file. * gdb.base/dump.exp: Remove support for spu*-*-*. * gdb.base/stack-checking.exp: Likewise. * gdb.base/overlays.exp: Likewise. * gdb.base/ovlymgr.c: Likewise. * gdb.base/spu.ld: Remove file. * gdb.cp/bs15503.exp: Remove support for spu*-*-*. * gdb.cp/cpexprs.exp: Likewise. * gdb.cp/exception.exp: Likewise. * gdb.cp/gdb2495.exp: Likewise. * gdb.cp/mb-templates.exp: Likewise. * gdb.cp/pr9167.exp: Likewise. * gdb.cp/userdef.exp: Likewise. * gdb.xml/tdesc-regs.exp: Remove support for spu*-*-*. * gdb.cell: Remove directory. * lib/cell.exp: Remove file.
2019-02-14[gdb, hurd] Repair build after "Share fork_inferior et al with gdbserver" ↵Thomas Schwinge1-0/+1
changes ..., that is commit 2090129c36c7e582943b7d300968d19b46160d84 causing: [...]/gdb/gnu-nat.c: In function 'void gnu_ptrace_me()': [...]/gdb/gnu-nat.c:2133:5: error: 'trace_start_error_with_name' was not declared in this scope trace_start_error_with_name ("ptrace"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ [...]/gdb/gnu-nat.c:2133:5: note: suggested alternative: 'throw_perror_with_name' trace_start_error_with_name ("ptrace"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ throw_perror_with_name [...]/gdb/gnu-nat.c: In function 'void gnu_create_inferior(target_ops*, const char*, const string&, char**, int)': [...]/gdb/gnu-nat.c:2147:9: error: 'fork_inferior' was not declared in this scope pid = fork_inferior (exec_file, allargs, env, gnu_ptrace_me, ^~~~~~~~~~~~~ [...]/gdb/gnu-nat.c:2147:9: note: suggested alternative: 'exit_inferior' pid = fork_inferior (exec_file, allargs, env, gnu_ptrace_me, ^~~~~~~~~~~~~ exit_inferior [...]/gdb/gnu-nat.c:2174:30: error: 'START_INFERIOR_TRAPS_EXPECTED' was not declared in this scope gdb_startup_inferior (pid, START_INFERIOR_TRAPS_EXPECTED); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/bin/ld: gnu-nat.o: in function `gnu_ptrace_me()': [...]/gdb/gnu-nat.c:2134: undefined reference to `trace_start_error_with_name(char const*)' /usr/bin/ld: gnu-nat.o: in function `gnu_create_inferior(target_ops*, char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, char**, int)': [...]/gdb/gnu-nat.c:2148: undefined reference to `fork_inferior(char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, char**, void (*)(), void (*)(int), void (*)(), char const*, void (*)(char const*, char* const*, char* const*))' /usr/bin/ld: fork-child.o: in function `gdb_startup_inferior(int, int)': [...]/gdb/fork-child.c:136: undefined reference to `startup_inferior(int, int, target_waitstatus*, ptid_t*)' collect2: error: ld returned 1 exit status gdb/ * configure.nat [gdb_host == i386gnu] (NATDEPFILES): Add 'nat/fork-inferior.o'. * gnu-nat.c: #include "nat/fork-inferior.h".
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-12-27Build gdb "nat" files in subdirectoryTom Tromey1-33/+40
This moves the various "nat" object files into the nat/ subdirectory. This allows for the removal of a pattern rule from the gdb Makefile, which is a small cleanup. I made the configure.nat change in a (semi-) automated way, hopefully meaning that it is more likely to be correct than had I done it by hand. Eventually I would like for the various configure scripts to only mention source files, and let the Makefile compute the object file names. gdb/ChangeLog 2018-12-27 Tom Tromey <tom@tromey.com> * configure.nat (NATDEPFILES): Use nat/ prefix. * Makefile.in (CONFIG_SRC_SUBDIR): Add nat. (%.o: ${srcdir}/nat/%.c): Remove rule. (INIT_FILES): Do not filter out NATDEPFILES.
2018-12-27Remove empty nm-fbsd.h header for FreeBSD/i386 native target.John Baldwin1-1/+0
gdb/ChangeLog: * config/i386/nm-fbsd.h: Remove file. * Makefile.in (HFILES_NO_SRCDIR): Remove config/i386/nm-fbsd.h. * configure.nat: Remove NAT_FILE for FreeBSD/i386.
2018-10-08Add native target for FreeBSD/riscv.John Baldwin1-0/+4
gdb/ChangeLog: * Makefile.in (ALLDEPFILES): Add riscv-fbsd-nat.c. * NEWS: Mention new FreeBSD/riscv native configuration. * configure.host: Add riscv*-*-freebsd*. * configure.nat: Likewise. * riscv-fbsd-nat.c: New file. gdb/doc/ChangeLog: * gdb.texinfo (Contributors): Add SRI International and University of Cambridge for FreeBSD/riscv.
2018-09-20Fold i386-v4-nat.c into i386-sol2-nat.cRainer Orth1-1/+1
I've been carrying around the following patch for some time. I noticed that both i386-sol2-nat.c and i386-v4-nat.c are Solaris-only now and it seems confusing to carry both around. So this patch merges i386-v4-nat.c into i386-sol2-nat.c, simplifying it in a couple of places, like removing checks for macros that are always defined. Tested on 64-bit Solaris 11.5/x86 (amd64-pc-solaris2.11) and 32-bit Solaris 11.3/x86 (i386-pc-solaris2.11) half a year ago. * i386-v4-nat.c (regmap, supply_gregset, fill_gregset) (supply_fpregset, fill_fpregset): Move ... * i386-sol2-nat.c [PR_MODEL_NATIVE != PR_MODEL_LP64]: ... here. Remove HAVE_GREGSET_T, HAVE_FPREGET_T guards. Remove references to ioctl-based procfs. Include <sys/reg.h>. Remove PR_MODEL_NATIVE guards. * configure.nat <sol2, i386> (NATDEPFILES): Remove i386-v4-nat.o. * Makefile.in (ALLDEPFILES): Remove i386-v4-nat.c.
2018-08-09RISC-V: Add configure support for riscv*-linux*.Jim Wilson1-0/+4
This adds the target and native configure support, and the NEWS entries for the new target and native configurations. gdb/ * Makefile.in (ALL_TARGET_OBS): Add riscv-linux-tdep.c. (ALLDEPFILES): Add riscv-linux-nat.c, and riscv-linux-tdep.c. * NEWS: Mention new GNU/Linux RISC-V target. * configure.host: Add riscv*-*-linux*. * configure.nat: Add riscv*. * configure.tgt: Add riscv*-*-linux*.
2018-05-31Function for reading the Aarch64 SVE vector lengthAlan Hayward1-1/+2
Returns 0 for systems without SVE support. Note the defines taken from Linux kernel headers in aarch64-sve-linux-ptrace.h. gdb/ * Makefile.in: Add new header. * gdb/arch/aarch64.h (sve_vg_from_vl): New macro. (sve_vl_from_vg): Likewise. (sve_vq_from_vl): Likewise. (sve_vl_from_vq): Likewise. (sve_vq_from_vg): Likewise. (sve_vg_from_vq): Likewise. * configure.nat: Add new c file. * nat/aarch64-sve-linux-ptrace.c: New file. * nat/aarch64-sve-linux-ptrace.h: New file. gdbserver/ * configure.srv: Add new c/h file.
2018-05-22[PowerPC] Consolidate wordsize getter between native and gdbserverPedro Franco de Carvalho1-1/+1
This patch moves the native target wordsize getter for ppc linux to nat/ so that it can be used to simplify ppc_arch_setup in gdbserver. The ptrace call used to get MSR for this is ultimately the same as before, but it is no longer necessary to create a temporary regcache to call fetch_inferior_registers. gdb/ChangeLog: 2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com> * configure.nat <linux powerpc>: Add ppc-linux.o to NATDEPFILES. * ppc-linux-nat.c (ppc_linux_target_wordsize): Move to nat/ppc-linux.c. (ppc_linux_nat_target::auxv_parse): Get thread id tid. Call ppc_linux_target_wordsize with tid. (ppc_linux_nat_target::read_description): Call ppc_linux_target wordsize with tid. * nat/ppc-linux.c: Include nat/gdb_ptrace.h. (ppc64_64bit_inferior_p): Add static and inline specifiers. (ppc_linux_target_wordsize): Move here from ppc-linux-nat.c. Add tid parameter. Remove static specifier. * nat/ppc-linux.h (ppc64_64bit_inferior_p): Remove declaration. (ppc_linux_target_wordsize): New declaration. gdb/gdbserver/ChangeLog: 2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com> * linux-ppc-low.c (ppc_arch_setup): Remove code for getting the wordsize of the inferior. Call ppc_linux_target_wordsize.
2018-05-03Make inf_ptrace_trad Linux-only, move to separate filePedro Alves1-3/+3
There are only two inf_ptrace_trad_target users, MIPS GNU/Linux and Alpha GNU/Linux. They both call it via linux_trad_target. Move this code out of inf-ptrace.c to a GNU/Linux-specific new file. Making this code be GNU/Linux-specific simplifies C++ification of target_ops, because we can make the trad target inherit linux_nat instead of inheriting inf_ptrace. That'll be visible in a later patch. Note this makes linux_target_install_ops an extern function, but that is temporary -- the function will disappear once target_ops is made a C++ class with virtual methods, later in the series. Also, I did not rename the functions in the new file for a similar reason. They'll be renamed again anyway in a couple of patches. gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * alpha-linux-nat.c: Include "linux-nat-trad.h" instead of "linux-nat.h". * configure.nat (alpha-linux, linux-mips): Add linux-nat-trad.o. * inf-ptrace.c (inf_ptrace_register_u_offset) (inf_ptrace_fetch_register, inf_ptrace_fetch_registers) (inf_ptrace_store_register, inf_ptrace_store_registers) (inf_ptrace_trad_target): Move to ... * linux-nat-trad.c: ... this new file. * linux-nat-trad.h: New file. * linux-nat.c (linux_target_install_ops): Make extern. (linux_trad_target): Delete. * linux-nat.h (linux_trad_target): Delete declaration. (linux_target_install_ops): Declare. * mips-linux-nat.c: Include "linux-nat-trad.h" instead of "linux-nat.h".
2018-04-16gdb: Remove OpenBSD/m88k supportPedro Alves1-4/+0
Support for m88k was fully removed from bfd, which broke gdb --enable-targets=all builds: > gdb/m88k-tdep.c: In function void _initialize_m88k_tdep(): > gdb/m88k-tdep.c:867:21: error: bfd_arch_m88k was not declared in this scope > gdbarch_register (bfd_arch_m88k, m88k_gdbarch_init, NULL); There's no point in keeping GDB support for OpenBSD/m88k with no bfd support, so this commit simply removes the port. gdb/ChangeLog: 2018-04-16 Pedro Alves <palves@redhat.com> * MAINTAINERS: Remove m88k. * Makefile.in (ALL_TARGET_OBS): Remove m88k-tdep.o. (HFILES_NO_SRCDIR): Remove m88k-tdep.h. (ALLDEPFILES): Remove m88k-bsd-nat.c and m88k-tdep.c. * NEWS: Mention that support for OpenBSD/m88k was removed. * configure.host (m88*-*-*): Remove support. * configure.nat (m88k-*-*): Remove support. * configure.tgt (m88*-*-openbsd*): Remove. * m88k-bsd-nat.c, m88k-tdep.c, m88k-tdep.h: Delete.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-11-24[spu] Fix spu-linux native buildUlrich Weigand1-1/+2
Add missing file to NATDEPFILES. gdb/ChangeLog: 2017-11-24 Ulrich Weigand <uweigand@de.ibm.com> * configure.nat <spu-linux>: Add fork-inferior.o to NATDEPFILES.
2017-10-11Add native target for FreeBSD/arm.John Baldwin1-0/+5
gdb/ChangeLog: * Makefile.in (ALLDEPFILES): Add arm-fbsd-nat.c. * NEWS: Mention new FreeBSD/arm native configuration. * configure.host: Add arm*-*-freebsd*. * configure.nat: Likewise. * arm-fbsd-nat.c: New file.
2017-09-26Remove support for Solaris < 10 (PR gdb/22185)Rainer Orth1-26/+12
Given that GCC has obsoleted/removed support for Solaris 9 in GCC 4.9/5 in 2013: https://gcc.gnu.org/gcc-4.9/changes.html https://gcc.gnu.org/ml/gcc-patches/2013-05/msg00728.html and the last gdb version that can be compiled with gcc 4.9 is 7.12.1 only when configured with --disable-build-with-cxx, it's time to obsolete/remove support for Solaris < 10. This patch does this, simplifying configure.nat along the way (only a single sol2 configuration with variants for i386 and sparc). Some configure checks for older Solaris versions can go, too, and the check for libthread_db.so.1 removed: * Since Solaris 10, dlopen has moved to libc and libdl.so is just a filter on ld.so.1, so no need to check. * $RDYNAMIC is already handled above (and is a no-op with Solaris ld anyway). Both proc-service.c and sol-thread.c lose support for (Solaris-only) PROC_SERVICE_IS_OLD. The attached revised patch has been tested on sparcv9-sun-solaris2.10, sparcv9-sun-solaris2.11.4, amd64-pc-solaris2.10, amd64-pc-solaris2.11.4, and x86_64-pc-linux-gnu. I've also started an i386-pc-solaris2.9 build to check that it really stops as expected. PR gdb/22185 * configure.host <*-*-solaris2.[01], *-*-solaris2.[2-9]*>: Mark as obsolete. Use gdb_host sol2 for i[34567]86-*-solaris2*, x86_64-*-solaris2*. Remove i386sol2 support. * configure.nat <i386sol2>: Remove. <sol2-64>: Fold into ... <sol2>: ... this. Move common settings to default section. Add sol-thread.o. * configure.tgt <i[34567]86-*-solaris2.1[0-9]*, x86_64-*-solaris2.1[0-9]*>: Rename to ... <i[34567]86-*-solaris2*, x86_64-*-solaris2*>: ... this. <i[34567]86-*-solaris*>: Remove. <sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*>: Remove. * configure.ac: Remove wctype in libw check. (_MSE_INT_H): Don't define on Solaris 7-9. <solaris*>: Remove libthread_db.so.1 check. * configure: Regenerate. * config.in: Regenerate. * proc-service.c: Remove PROC_SERVICE_IS_OLD handling. (gdb_ps_prochandle_t, gdb_ps_read_buf_t, gdb_ps_write_buf_t) (gdb_ps_size_t): Remove. Use base types in users. * sol-thread.c: Likewise, also for gdb_ps_addr_t. * NEWS (Changes since GDB 8.0): Document Solaris 2.0-9 removal.
2017-09-22Fix gdb 8.1 Solaris compilationRainer Orth1-3/+5
I just tried to compile gdb trunk on Solaris 11.4 (formerly 12), and failed for a couple of reasons: * In file included from /usr/include/python2.7/Python.h:128:0, from /vol/src/gnu/gdb/gdb/dist/gdb/python/python-internal.h:94, from /vol/src/gnu/gdb/gdb/dist/gdb/python/py-instruction.h:23, from /vol/src/gnu/gdb/gdb/dist/gdb/python/py-instruction.c:21: /usr/include/python2.7/ceval.h:67:0: error: ignoring #pragma no_inline [-Werror=unknown-pragmas] #pragma no_inline(PyEval_EvalFrameEx) ^ New in Solaris 11.4: <python2.7/ceval.h> uses a Studio-only #pragma. I've disabled the warning in warnings.m4. * /vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c: In function ‘int pipe_open(serial*, const char*)’: /vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c:77:9: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations] pid = vfork (); ^ /vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c:77:16: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations] pid = vfork (); ^ Since Solaris 11, vfork () is marked deprecated in <unistd.h>. cf. vfork(2): The vfork() and vforkx() functions are deprecated. Their sole legiti- mate use as a prelude to an immediate call to a function from the exec family can be achieved safely by posix_spawn(3C) or posix_spawnp(3C). Again, I've disabled the warning. * /vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c: In function ‘void shell_escape(const char*, int)’: /vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c:750:14: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations] if ((pid = vfork ()) == 0) ^ /vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c:750:21: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations] if ((pid = vfork ()) == 0) ^ Same problem. * /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_init_inferior(target_ops*, int)’: /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:4380:30: error: ‘START_INFERIOR_TRAPS_EXPECTED’ was not declared in this scope gdb_startup_inferior (pid, START_INFERIOR_TRAPS_EXPECTED); ^ defined in nat/fork-inferior.h, need to include that header /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_create_inferior(target_ops*, const char*, const string&, char**, int)’: /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:4605:38: error: ‘fork_inferior’ was not declared in this scope NULL, NULL, shell_file, NULL); ^ likewise /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_info_proc(target_ops*, const char*, info_proc_what)’: /vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:5124:20: error: ‘argv’ was not declared in this scope for (char *arg : argv) ^ Typo, should be built_argv instead! * Undefined first referenced symbol in file fork_inferior(char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, char**, void (*)(), void (*)(int), void (*)(), char const*, void (*)(char const*, char* const*, char* const*)) procfs.o startup_inferior(int, int, target_waitstatus*, ptid_t*) fork-child.o ld: fatal: symbol referencing errors collect2: error: ld returned 1 exit status make[2]: *** [Makefile:2249: gdb] Error 1 Need to add fork-inferior.o to NATDEPFILES. With the changes below, I can build gdb on sparcv9-sun-solaris2.11 and amd64-pc-solaris2.11 and a simple smoke test (gdb/gdb gdb/gdb) works.
2017-09-06Define HAVE_NATIVE_GCORE_HOST on NetBSDKamil Rytarowski1-0/+1
NetBSD ships with gcore(1) againg since the version 2.0. This tool is functional and actively maintained. gdb/ChangeLog 2017-09-06 Kamil Rytarowski <n54@gmx.com> * configure.nat: Define HAVE_NATIVE_GCORE_HOST on NetBSD.
2017-09-06Add native target for FreeBSD/aarch64.John Baldwin1-0/+5
gdb/ChangeLog: * Makefile.in (ALLDEPFILES): Add mips-fbsd-nat.c. * NEWS: Mention new FreeBSD/mips native configuration. * configure.host: Add aarch64*-*-freebsd*. * configure.nat: Likewise. * aarch64-fbsd-nat.c: New file.
2017-09-04Enable support for x86 debug registers on NetBSD.John Baldwin1-4/+4
NetBSD recently added PT_GETDBREGS and PT_SETDBREGS ptrace operations that match the existing ones supported by x86-bsd-nat.c. NetBSD's headers do not provide the DBREG_DRX helper macro, so define a local version in x86-bsd-nat.c. In addition, add the x86-nat.o and x86-dregs.o object files to the native NetBSD x86 build targets. gdb/ChangeLog: * configure.nat: Add "x86-nat.o x86-dregs.o" for NetBSD/amd64 and NetBSD/i386. * x86-bsd-nat.c [!DBREG_DRX && __NetBSD__]: Define DBREG_DRX.
2017-07-25Fix two NetBSD-specific typos in the configure.nat conversion.John Baldwin1-1/+2
- Add the '-lkvm' library requirement for NetBSD/sparc64. - Fix spelling of 'nbsdelf' host. gdb/Changelog: * configure.nat: Add "-lkvm" for NetBSD/sparc64 and fix typo.
2017-06-13darwin: Add fork-inferior.o to NATDEPFILESSimon Marchi1-3/+6
I happened to be build-testing on macOS and found this: Undefined symbols for architecture x86_64: "fork_inferior(char const*, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&, char**, void (*)(), void (*)(int), void (*)(), char const*, void (*)(char const*, char* const*, char* const*))", referenced from: darwin_create_inferior(target_ops*, char const*, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&, char**, int) in darwin-nat.o "startup_inferior(int, int, target_waitstatus*, ptid_t*)", referenced from: gdb_startup_inferior(int, int) in fork-child.o "trace_start_error(char const*, ...)", referenced from: darwin_ptrace_me() in darwin-nat.o "trace_start_error_with_name(char const*)", referenced from: darwin_ptrace_me() in darwin-nat.o ld: symbol(s) not found for architecture x86_64 clang: error: linker command failed with exit code 1 (use -v to see invocation) Adding fork-inferior.o fixes it. I factored out the Darwin bits that are no architecture-specific in the section meant for that at the top. I only built-tested this using Travis-CI, since I don't have access to this platform. gdb/ChangeLog: * configure.nat: Factor out Darwin bits that are not architecture-specific. Add fork-inferior.o.
2017-06-13aix: Add fork-inferior.o to NATDEPFILESSimon Marchi1-1/+4
Trying to build on AIX gives: ld: 0711-317 ERROR: Undefined symbol: .trace_start_error_with_name(char const*) ld: 0711-317 ERROR: Undefined symbol: .fork_inferior(char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, char**, void (*)(), void (*)(int), void (*)(), char const*, void (*)(char const*, char* const*, char* const*)) ld: 0711-317 ERROR: Undefined symbol: .startup_inferior(int, int, target_waitstatus*, ptid_t*) Including fork-inferior.o in the build should help. I also factored out the AIX bits that are not architecture-specific to be consistent with the other OSes. gdb/ChangeLog: * configure.nat: Factor out AIX bits that are not architecture-specific. Add fork-inferior.o.
generated by cgit v1.1 at 2024-11-22 16:19:35 +0000