| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove the support for the QNX Neutrino OS (tdep and native bits). This
has been unmaintained for years, and we don't have a way to see if it
works (or even builds, for the native parts). Without somebody actively
maintaining it, this is just a burden for developers, especially that
this port does a few weird unique things that require reasoning about
when doing big change.
Support for GDBserver was removed in 2020, commit 613f149a90d6
("gdbserver: remove support for Neutrino").
Change-Id: I4e25ec26ab06636629adebd02ceb161ee31c232d
Approved-by: Kevin Buettner <kevinb@redhat.com>
|
|
LoongArch defines hardware watchpoint functions for load/store
operations. After the software configures the watchpoints for
load/store, the processor hardware will monitor the access
addresses of the load/store operations and trigger watchpoint
exception when the watchpoint setting conditions are met.
After this patch, watch/rwatch/awatch command are supported. Refer to the
following document for hardware watchpoint.
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
A simple test is as follows:
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
printf("start test\n");
a = 1;
printf("a = %d\n", a);
printf("end test\n");
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
without this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) awatch a
Target does not support this type of hardware watchpoint.
...
with this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) awatch a
Hardware access (read/write) watchpoint 2: a
(gdb) c
Continuing.
start test
Hardware access (read/write) watchpoint 2: a
Old value = 0
New value = 1
main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
Hardware access (read/write) watchpoint 2: a
Value = 1
0x00000001200006e0 in main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
end test
[Inferior 1 (process 22250) exited normally]
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
This commit builds on the previous series of commits to share the
target description caching code between GDB and gdbserver for
x86/Linux targets.
The objective of this commit is to move the four functions (2 each of)
i386_linux_read_description and amd64_linux_read_description into the
gdb/arch/ directory and combine them so we have just a single copy of
each. Then GDB, gdbserver, and the in-process-agent (IPA) will link
against these shared functions.
One curiosity with this patch is the function
x86_linux_post_init_tdesc. On the gdbserver side the two functions
amd64_linux_read_description and i386_linux_read_description have some
functionality that is not present on the GDB side, there is some
additional configuration that is performed as each target description
is created, to setup the expedited registers.
To support this I've added the function x86_linux_post_init_tdesc.
This function is called from the two *_linux_read_description
functions, but is implemented separately for GDB and gdbserver.
An alternative approach that avoids adding x86_linux_post_init_tdesc
would be to have x86_linux_tdesc_for_tid return a non-const target
description, then in x86_target::low_arch_setup we could inspect the
target description to figure out if it is 64-bit or not, and modify
the target description as needed. In the end I think that adding the
x86_linux_post_init_tdesc function is the simpler solution.
The contents of gdbserver/linux-x86-low.cc have moved to
gdb/arch/x86-linux-tdesc-features.c, and gdbserver/linux-x86-tdesc.h
has moved to gdb/arch/x86-linux-tdesc-features.h, this change leads to
some updates in the #includes in the gdbserver/ directory.
This commit also changes how target descriptions are cached.
Previously both GDB and gdbserver used static C-style arrays to act as
the tdesc cache. This was fine, except for two problems. Either the
C-style arrays would need to be placed in x86-linux-tdesc-features.c,
which would allow us to use the x86_linux_*_tdesc_count_1() functions
to size the arrays for us, or we'd need to hard code the array sizes
using separate #defines, which we'd then have to keep in sync with the
rest of the code in x86-linux-tdesc-features.c.
Given both of these problems I decided a better solution would be to
just switch to using a std::unordered_map to act as the cache. This
will resize automatically, and we can use the xcr0 value as the key.
At first inspection, using xcr0 might seem to be a problem; after all
the {i386,amd64}_create_target_description functions take more than
just the xcr0 value. However, this patch is only for x86/Linux
targets, and for x86/Linux all of the other flags passed to the tdesc
creation functions have constant values and so are irrelevant when we
consider tdesc caching.
For testing I've done the following:
- Built on x86-64 GNU/Linux for all targets, and just for the native
target,
- Build on i386 GNU/Linux for all targets, and just for the native
target,
- Build on a 64-bit, non-x86 GNU/Linux for all targets, just for the
native target, and for targets x86_64-*-linux and i386-*-linux.
Approved-By: Felix Willgerodt <felix.willgerodt@intel.com>
|
|
This commit is part of a series to share more of the x86 target
description creation code between GDB and gdbserver.
Unlike previous commits which were mostly refactoring, this commit is
the first that makes a real change, though that change should mostly
be for gdbserver; I've largely adopted the "GDB" way of doing things
for gdbserver, and this fixes a real gdbserver bug.
On a x86-64 Linux target, running the test:
gdb.server/connect-with-no-symbol-file.exp
results in two core files being created. Both of these core files are
from the inferior process, created after gdbserver has detached.
In this test a gdbserver process is started and then, after gdbserver
has started, but before GDB attaches, we either delete the inferior
executable, or change its permissions so it can't be read. Only after
doing this do we attempt to connect with GDB.
As GDB connects to gdbserver, gdbserver attempts to figure out the
target description so that it can send the description to GDB, this
involves a call to x86_linux_read_description.
In x86_linux_read_description one of the first things we do is try to
figure out if the process is 32-bit or 64-bit. To do this we look up
the executable via the thread-id, and then attempt to read the
architecture size from the executable. This isn't going to work if
the executable has been deleted, or is no longer readable.
And so, as we can't read the executable, we default to an i386 target
and use an i386 target description.
A consequence of using an i386 target description is that addresses
are assumed to be 32-bits. Here's an example session that shows the
problems this causes. This is run on an x86-64 machine, and the test
binary (xx.x) is a standard 64-bit x86-64 binary:
shell_1$ gdbserver --once localhost :54321 /tmp/xx.x
shell_2$ gdb -q
(gdb) set sysroot
(gdb) shell chmod 000 /tmp/xx.x
(gdb) target remote :54321
Remote debugging using :54321
warning: /tmp/xx.x: Permission denied.
0xf7fd3110 in ?? ()
(gdb) show architecture
The target architecture is set to "auto" (currently "i386").
(gdb) p/x $pc
$1 = 0xf7fd3110
(gdb) info proc mappings
process 2412639
Mapped address spaces:
Start Addr End Addr Size Offset Perms objfile
0x400000 0x401000 0x1000 0x0 r--p /tmp/xx.x
0x401000 0x402000 0x1000 0x1000 r-xp /tmp/xx.x
0x402000 0x403000 0x1000 0x2000 r--p /tmp/xx.x
0x403000 0x405000 0x2000 0x2000 rw-p /tmp/xx.x
0xf7fcb000 0xf7fcf000 0x4000 0x0 r--p [vvar]
0xf7fcf000 0xf7fd1000 0x2000 0x0 r-xp [vdso]
0xf7fd1000 0xf7fd3000 0x2000 0x0 r--p /usr/lib64/ld-2.30.so
0xf7fd3000 0xf7ff3000 0x20000 0x2000 r-xp /usr/lib64/ld-2.30.so
0xf7ff3000 0xf7ffb000 0x8000 0x22000 r--p /usr/lib64/ld-2.30.so
0xf7ffc000 0xf7ffe000 0x2000 0x2a000 rw-p /usr/lib64/ld-2.30.so
0xf7ffe000 0xf7fff000 0x1000 0x0 rw-p
0xfffda000 0xfffff000 0x25000 0x0 rw-p [stack]
0xff600000 0xff601000 0x1000 0x0 r-xp [vsyscall]
(gdb) info inferiors
Num Description Connection Executable
* 1 process 2412639 1 (remote :54321)
(gdb) shell cat /proc/2412639/maps
00400000-00401000 r--p 00000000 fd:03 45907133 /tmp/xx.x
00401000-00402000 r-xp 00001000 fd:03 45907133 /tmp/xx.x
00402000-00403000 r--p 00002000 fd:03 45907133 /tmp/xx.x
00403000-00405000 rw-p 00002000 fd:03 45907133 /tmp/xx.x
7ffff7fcb000-7ffff7fcf000 r--p 00000000 00:00 0 [vvar]
7ffff7fcf000-7ffff7fd1000 r-xp 00000000 00:00 0 [vdso]
7ffff7fd1000-7ffff7fd3000 r--p 00000000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7fd3000-7ffff7ff3000 r-xp 00002000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ff3000-7ffff7ffb000 r--p 00022000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ffc000-7ffff7ffe000 rw-p 0002a000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ffe000-7ffff7fff000 rw-p 00000000 00:00 0
7ffffffda000-7ffffffff000 rw-p 00000000 00:00 0 [stack]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
(gdb)
Notice the difference between the mappings reported via GDB and those
reported directly from the kernel via /proc/PID/maps, the addresses of
every mapping is clamped to 32-bits for GDB, while the kernel reports
real 64-bit addresses.
Notice also that the $pc value is a 32-bit value. It appears to be
within one of the mappings reported by GDB, but is outside any of the
mappings reported from the kernel.
And this is where the problem arises. When gdbserver detaches from
the inferior we pass the inferior the address from which it should
resume. Due to the 32/64 bit confusion we tell the inferior to resume
from the 32-bit $pc value, which is not within any valid mapping, and
so, as soon as the inferior resumes, it segfaults.
If we look at how GDB (not gdbserver) figures out its target
description then we see an interesting difference. GDB doesn't try to
read the executable. Instead GDB uses ptrace to query the thread's
state, and uses this to figure out the if the thread is 32 or 64 bit.
If we update gdbserver to do it the "GDB" way then the above problem
is resolved, gdbserver now sees the process as 64-bit, and when we
detach from the inferior we give it the correct 64-bit address, and
the inferior no longer segfaults.
Now, I could just update the gdbserver code, but better, I think, to
share one copy of the code between GDB and gdbserver in gdb/nat/.
That is what this commit does.
The cores of x86_linux_read_description from gdbserver and
x86_linux_nat_target::read_description from GDB are moved into a new
file gdb/nat/x86-linux-tdesc.c and combined into a single function
x86_linux_tdesc_for_tid which is called from each location.
This new function does things mostly the GDB way, some changes are
needed to allow for the sharing; we now take some pointers for where
the shared code can cache the xcr0 and xsave layout values.
Another thing to note about this commit is how the functions
i386_linux_read_description and amd64_linux_read_description are
handled. For now I've left these function as implemented separately
in GDB and gdbserver. I've moved the declarations of these functions
into gdb/arch/{i386,amd64}-linux-tdesc.h, but the implementations are
left where they are.
A later commit in this series will make these functions shared too,
but doing this is not trivial, so I've left that for a separate
commit. Merging the declarations as I've done here ensures that
everyone implements the function to the same API, and once these
functions are shared (in a later commit) we'll want a shared
declaration anyway.
Reviewed-By: Felix Willgerodt <felix.willgerodt@intel.com>
Acked-By: John Baldwin <jhb@FreeBSD.org>
|
|
The have_ptrace_getfpxregs global tracks whether GDB or gdbserver is
running on a kernel that supports the GETFPXREGS ptrace request.
Currently this global is declared twice (once in GDB and once in
gdbserver), I think it makes sense to move this global into the nat/
directory, and have a single declaration and definition.
While moving this variable I have converted it to a tribool, as that
was what it really was, if even used the same numbering as the tribool
enum (-1, 0, 1). Where have_ptrace_getfpxregs was used I have updated
in the obvious way.
However, while making this change I noticed what I think is a bug in
x86_linux_nat_target::read_description and x86_linux_read_description,
both of these functions can be called multiple times, but in both
cases we only end up calling i386_linux_read_description the first
time through in the event that PTRACE_GETFPXREGS is not supported.
This is because initially have_ptrace_getfpxregs will be
TRIBOOL_UNKNOWN, but after the ptrace call fails we set
have_ptrace_getfpxregs to TRIBOOL_FALSE. The next time we attempt to
read the target description we'll skip the ptrace call, and so skip
the call to i386_linux_read_description.
I've not tried to address this preexisting bug in this commit, this is
purely a refactor, there should be no user visible changes after this
commit. In later commits I'll merge the gdbserver and GDB code
together into the nat/ directory, and after that I'll try to address
this bug.
Reviewed-By: Felix Willgerodt <felix.willgerodt@intel.com>
|
|
This reverts commit cd9b374ffe372dcaf7e4c15548cf53a301d8dcdd.
|
|
This commit is part of a series to share more of the x86 target
description creation code between GDB and gdbserver.
Unlike previous commits which were mostly refactoring, this commit is
the first that makes a real change, though that change should mostly
be for gdbserver; I've largely adopted the "GDB" way of doing things
for gdbserver, and this fixes a real gdbserver bug.
On a x86-64 Linux target, running the test:
gdb.server/connect-with-no-symbol-file.exp
results in two core files being created. Both of these core files are
from the inferior process, created after gdbserver has detached.
In this test a gdbserver process is started and then, after gdbserver
has started, but before GDB attaches, we either delete the inferior
executable, or change its permissions so it can't be read. Only after
doing this do we attempt to connect with GDB.
As GDB connects to gdbserver, gdbserver attempts to figure out the
target description so that it can send the description to GDB, this
involves a call to x86_linux_read_description.
In x86_linux_read_description one of the first things we do is try to
figure out if the process is 32-bit or 64-bit. To do this we look up
the executable via the thread-id, and then attempt to read the
architecture size from the executable. This isn't going to work if
the executable has been deleted, or is no longer readable.
And so, as we can't read the executable, we default to an i386 target
and use an i386 target description.
A consequence of using an i386 target description is that addresses
are assumed to be 32-bits. Here's an example session that shows the
problems this causes. This is run on an x86-64 machine, and the test
binary (xx.x) is a standard 64-bit x86-64 binary:
shell_1$ gdbserver --once localhost :54321 /tmp/xx.x
shell_2$ gdb -q
(gdb) set sysroot
(gdb) shell chmod 000 /tmp/xx.x
(gdb) target remote :54321
Remote debugging using :54321
warning: /tmp/xx.x: Permission denied.
0xf7fd3110 in ?? ()
(gdb) show architecture
The target architecture is set to "auto" (currently "i386").
(gdb) p/x $pc
$1 = 0xf7fd3110
(gdb) info proc mappings
process 2412639
Mapped address spaces:
Start Addr End Addr Size Offset Perms objfile
0x400000 0x401000 0x1000 0x0 r--p /tmp/xx.x
0x401000 0x402000 0x1000 0x1000 r-xp /tmp/xx.x
0x402000 0x403000 0x1000 0x2000 r--p /tmp/xx.x
0x403000 0x405000 0x2000 0x2000 rw-p /tmp/xx.x
0xf7fcb000 0xf7fcf000 0x4000 0x0 r--p [vvar]
0xf7fcf000 0xf7fd1000 0x2000 0x0 r-xp [vdso]
0xf7fd1000 0xf7fd3000 0x2000 0x0 r--p /usr/lib64/ld-2.30.so
0xf7fd3000 0xf7ff3000 0x20000 0x2000 r-xp /usr/lib64/ld-2.30.so
0xf7ff3000 0xf7ffb000 0x8000 0x22000 r--p /usr/lib64/ld-2.30.so
0xf7ffc000 0xf7ffe000 0x2000 0x2a000 rw-p /usr/lib64/ld-2.30.so
0xf7ffe000 0xf7fff000 0x1000 0x0 rw-p
0xfffda000 0xfffff000 0x25000 0x0 rw-p [stack]
0xff600000 0xff601000 0x1000 0x0 r-xp [vsyscall]
(gdb) info inferiors
Num Description Connection Executable
* 1 process 2412639 1 (remote :54321)
(gdb) shell cat /proc/2412639/maps
00400000-00401000 r--p 00000000 fd:03 45907133 /tmp/xx.x
00401000-00402000 r-xp 00001000 fd:03 45907133 /tmp/xx.x
00402000-00403000 r--p 00002000 fd:03 45907133 /tmp/xx.x
00403000-00405000 rw-p 00002000 fd:03 45907133 /tmp/xx.x
7ffff7fcb000-7ffff7fcf000 r--p 00000000 00:00 0 [vvar]
7ffff7fcf000-7ffff7fd1000 r-xp 00000000 00:00 0 [vdso]
7ffff7fd1000-7ffff7fd3000 r--p 00000000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7fd3000-7ffff7ff3000 r-xp 00002000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ff3000-7ffff7ffb000 r--p 00022000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ffc000-7ffff7ffe000 rw-p 0002a000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ffe000-7ffff7fff000 rw-p 00000000 00:00 0
7ffffffda000-7ffffffff000 rw-p 00000000 00:00 0 [stack]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
(gdb)
Notice the difference between the mappings reported via GDB and those
reported directly from the kernel via /proc/PID/maps, the addresses of
every mapping is clamped to 32-bits for GDB, while the kernel reports
real 64-bit addresses.
Notice also that the $pc value is a 32-bit value. It appears to be
within one of the mappings reported by GDB, but is outside any of the
mappings reported from the kernel.
And this is where the problem arises. When gdbserver detaches from
the inferior we pass the inferior the address from which it should
resume. Due to the 32/64 bit confusion we tell the inferior to resume
from the 32-bit $pc value, which is not within any valid mapping, and
so, as soon as the inferior resumes, it segfaults.
If we look at how GDB (not gdbserver) figures out its target
description then we see an interesting difference. GDB doesn't try to
read the executable. Instead GDB uses ptrace to query the thread's
state, and uses this to figure out the if the thread is 32 or 64 bit.
If we update gdbserver to do it the "GDB" way then the above problem
is resolved, gdbserver now sees the process as 64-bit, and when we
detach from the inferior we give it the correct 64-bit address, and
the inferior no longer segfaults.
Now, I could just update the gdbserver code, but better, I think, to
share one copy of the code between GDB and gdbserver in gdb/nat/.
That is what this commit does.
The cores of x86_linux_read_description from gdbserver and
x86_linux_nat_target::read_description from GDB are moved into a new
file gdb/nat/x86-linux-tdesc.c and combined into a single function
x86_linux_tdesc_for_tid which is called from each location.
This new function does things the GDB way, the only changes are to
allow for the sharing; we now have a callback function to call the
first time that the xcr0 state is read, this allows for GDB and
gdbserver to perform their own initialisation as needed, and
additionally, the new function takes a pointer for where to cache the
xcr0 value, this isn't needed for this commit, but will be useful in a
later commit where gdbserver will want to read this cached xcr0
value.
Another thing to note about this commit is how the functions
i386_linux_read_description and amd64_linux_read_description are
handled. For now I've left these function as implemented separately
in GDB and gdbserver. I've moved the declarations of these functions
into gdb/nat/x86-linux-tdesc.h, but the implementations are left as
separate.
A later commit in this series will make these functions shared too,
but doing this is not trivial, so I've left that for a separate
commit. Merging the declarations as I've done here ensures that
everyone implements the function to the same API, and once these
functions are shared (in a later commit) we'll want a shared
declaration anyway.
Approved-By: John Baldwin <jhb@FreeBSD.org>
|
|
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
|
|
In preparation to the SME support patches, rename the SVE-specific files to
something a bit more meaningful that can be shared with the SME code.
In this case, I've renamed the "sve" in the names to "scalable".
No functional changes.
Regression-tested on aarch64-linux Ubuntu 22.04/20.04.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
|
|
Note that this uses the CPUID instruction to determine the total size
of the XSAVE register set. If there is a way to fetch the register set
size using ptrace that would probably be better.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
Use the CPUID instruction to fetch the offsets of supported state
components.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
|
|
This shares aarch64-nat.c and nat/aarch64-hw-point.c with the Linux
native target. Since FreeBSD writes all of the debug registers in one
ptrace op, use an unordered_set<> to track the "dirty" state for
threads rather than bitmasks of modified registers.
|
|
This class includes platform-independent target methods for hardware
breakpoints and watchpoints using routines from
nat/aarch64-hw-point.c.
stopped_data_address is not platform-independent since the FAR
register holding the address for a breakpoint hit must be fetched in a
platform-specific manner. However, aarch64_stopped_data_address is
provided as a helper routine which performs platform-independent
validation given the value of the FAR register.
For tracking the per-process debug register mirror state, use an
unordered_map indexed by pid as recently adopted in x86-nat.c rather
than a manual linked-list.
|
|
Move non-Linux-specific support for hardware break/watchpoints from
nat/aarch64-linux-hw-point.c to nat/aarch64-hw-point.c. Changes
beyond a simple split of the code are:
- aarch64_linux_region_ok_for_watchpoint and
aarch64_linux_any_set_debug_regs_state renamed to drop linux_ as
they are not platform specific.
- Platforms must implement the aarch64_notify_debug_reg_change
function which is invoked from the platform-independent code when a
debug register changes for a given debug register state. This does
not use the indirection of a 'low' structure as is done for x86.
- The handling for kernel_supports_any_contiguous_range is not
pristine. For non-Linux it is simply defined to true. Some uses of
this could perhaps be implemented as new 'low' routines for the
various places that check it instead?
- Pass down ptid into aarch64_handle_breakpoint and
aarch64_handle_watchpoint rather than using current_lwp_ptid which
is only defined on Linux. In addition, pass the ptid on to
aarch64_notify_debug_reg_change instead of the unused state
argument.
|
|
Use the FreeBSD native target low_new_fork hook to copy the
per-process debug state from the parent to the child on fork.
|
|
This commit adds Makefile, configure and NEWS for LoongArch.
Signed-off-by: Zhensong Liu <liuzhensong@loongson.cn>
Signed-off-by: Qing zhang <zhangqing@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
Rather than using the x86-specific register offset tables, use
register maps to describe the layout of the general purpose registers
fetched via PT_GETREGS. The sole user-visible difference is that
FreeBSD/amd64 will now report additional segment registers ($ds, $es,
$fs, and $gs) for both 32-bit and 64-bit processes.
As part of these changes, the FreeBSD x86 native targets no longer use
amd64-bsd-nat.c or i386-bsd-nat.c. Remove FreeBSD-specific register
handling (for $fs_base, $gs_base, and XSAVE state) from these files.
Similarly, remove the global x86bsd_xsave_len from x86-bsd-nat.c. The
FreeBSD x86 native targets use a static xsave_len instead.
While here, rework the probing of PT_GETXMMREGS on FreeBSD/i386.
Probe the ptrace op once in the target read_description method and
cache the result for the future similar to the way the status of XSAVE
support is probed in the read_description method. In addition, return
the proper xcr0 mask (X87-only) for old kernels or systems without
either XSAVE or XMM support.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
This file seems to be AIX-specific, according to its contents and
configure.nat. Rename it to rs6000-aix-nat.c, to make that clear (and
to follow the convention).
Change-Id: Ib418dddc6b79b2e28f64431121742b5e87f5f4f5
|
|
This patch adds support for running gdb natively on OpenRISC linux.
Debugging support is provided via the linux PTRACE interface which is
mostly handled by GDB genric code. This patch provides the logic of how
to read and write the ptrace registers between linux and GDB.
Single stepping is privided in a separate patch.
|
|
Simon Marchi tried gdb on OpenBSD, and it immediately segfaults when
running a program. Simon tracked down the problem to x86_dr_low.get_status
being nullptr at this point:
(lldb) print x86_dr_low.get_status
(unsigned long (*)()) $0 = 0x0000000000000000
(lldb) bt
* thread #1, stop reason = step over
* frame #0: 0x0000033b64b764aa gdb`x86_dr_stopped_data_address(state=0x0000033d7162a310, addr_p=0x00007f7ffffc5688) at x86-dregs.c:645:12
frame #1: 0x0000033b64b766de gdb`x86_dr_stopped_by_watchpoint(state=0x0000033d7162a310) at x86-dregs.c:687:10
frame #2: 0x0000033b64ea5f72 gdb`x86_stopped_by_watchpoint() at x86-nat.c:206:10
frame #3: 0x0000033b64637fbb gdb`x86_nat_target<obsd_nat_target>::stopped_by_watchpoint(this=0x0000033b65252820) at x86-nat.h:100:12
frame #4: 0x0000033b64d3ff11 gdb`target_stopped_by_watchpoint() at target.c:468:46
frame #5: 0x0000033b6469b001 gdb`watchpoints_triggered(ws=0x00007f7ffffc61c8) at breakpoint.c:4790:32
frame #6: 0x0000033b64a8bb8b gdb`handle_signal_stop(ecs=0x00007f7ffffc61a0) at infrun.c:6072:29
frame #7: 0x0000033b64a7e3a7 gdb`handle_inferior_event(ecs=0x00007f7ffffc61a0) at infrun.c:5694:7
frame #8: 0x0000033b64a7c1a0 gdb`fetch_inferior_event() at infrun.c:4090:5
frame #9: 0x0000033b64a51921 gdb`inferior_event_handler(event_type=INF_REG_EVENT) at inf-loop.c:41:7
frame #10: 0x0000033b64a827c9 gdb`infrun_async_inferior_event_handler(data=0x0000000000000000) at infrun.c:9384:3
frame #11: 0x0000033b6465bd4f gdb`check_async_event_handlers() at async-event.c:335:4
frame #12: 0x0000033b65070917 gdb`gdb_do_one_event() at event-loop.cc:216:10
frame #13: 0x0000033b64af0db1 gdb`start_event_loop() at main.c:421:13
frame #14: 0x0000033b64aefe9a gdb`captured_command_loop() at main.c:481:3
frame #15: 0x0000033b64aed5c2 gdb`captured_main(data=0x00007f7ffffc6470) at main.c:1353:4
frame #16: 0x0000033b64aed4f2 gdb`gdb_main(args=0x00007f7ffffc6470) at main.c:1368:7
frame #17: 0x0000033b6459d787 gdb`main(argc=5, argv=0x00007f7ffffc6518) at gdb.c:32:10
frame #18: 0x0000033b6459d521 gdb`___start + 321
On BSDs, get_status is set in _initialize_x86_bsd_nat, but only if
HAVE_PT_GETDBREGS is defined. PT_GETDBREGS doesn't exist on OpenBSD, so
get_status (and the other fields of x86_dr_low) are left as nullptr.
OpenBSD doesn't support getting or setting the x86 debug registers, so
fix by omitting debug register support entirely on OpenBSD:
- Change x86bsd_nat_target to only inherit from x86_nat_target if
PT_GETDBREGS is supported.
- Don't include x86-nat.o and nat/x86-dregs.o for OpenBSD/amd64. They
were already omitted for OpenBSD/i386.
|
|
The patch implements the memory tagging target hooks for AArch64, so we
can handle MTE.
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* Makefile.in (ALL_64_TARGET_OBS): Add arch/aarch64-mte-linux.o.
(HFILES_NO_SRCDIR): Add arch/aarch64-mte-linux.h and
nat/aarch64-mte-linux-ptrace.h.
* aarch64-linux-nat.c: Include nat/aarch64-mte-linux-ptrace.h.
(aarch64_linux_nat_target) <supports_memory_tagging>: New method
override.
<fetch_memtags>: New method override.
<store_memtags>: New method override.
(aarch64_linux_nat_target::supports_memory_tagging): New method.
(aarch64_linux_nat_target::fetch_memtags): New method.
(aarch64_linux_nat_target::store_memtags): New method.
* arch/aarch64-mte-linux.c: New file.
* arch/aarch64-mte-linux.h: Include gdbsupport/common-defs.h.
(AARCH64_MTE_GRANULE_SIZE): Define.
(aarch64_memtag_type): New enum.
(aarch64_mte_get_tag_granules): New prototype.
* configure.nat (NATDEPFILES): Add nat/aarch64-mte-linux-ptrace.o.
* configure.tgt (aarch64*-*-linux*): Add arch/aarch64-mte-linux.o.
* nat/aarch64-mte-linux-ptrace.c: New file.
* nat/aarch64-mte-linux-ptrace.h: New file.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
With this patch in place it is possible to build a GDB that
can run on ARC (GNU/Linux) hosts for debugging ARC targets.
The "arc-linux-nat.c" is a rather small one that mostly deals
with registers and a few thread related hooks.
v2 [1]:
- Remove "void" from the input of "_initialize_arc_linux_nat ()"
[1] Tom's remark after the first patch
https://sourceware.org/pipermail/gdb-patches/2020-November/173223.html
gdb/ChangeLog:
* Makefile.in (ALLDEPFILES): Add arc-linux-nat.c.
* configure.host (host to gdb names): Add arc*-*-linux*.
* configure.nat (gdb_host_cpu): Add arc.
* arc-linux-nat.c: New.
|
|
The files used to be named 'nbsd', which incorrectly reflects
the name of the OS and confuses it with other BSD derived OSes.
gdb/ChangeLog:
* Makefile.in (ALL_64_TARGET_OBS, ALL_TARGET_OBS)
HFILES_NO_SRCDIR, ALLDEPFILES): Rename files.
* alpha-bsd-nat.c: Adjust include.
* alpha-bsd-tdep.h: Adjust comment.
* alpha-nbsd-tdep.c: Rename to ...
* alpha-netbsd-tdep.c: ... this, adjust include.
* amd64-nbsd-nat.c: Rename to ...
* amd64-netbsd-nat.c: ... this, adjust include.
* amd64-nbsd-tdep.c: Rename to ...
* amd64-netbsd-tdep.c: ... this, adjust include.
* amd64-tdep.h: Adjust include.
* arm-nbsd-nat.c: Rename to ...
* arm-netbsd-nat.c: ... this, adjust include.
* arm-nbsd-tdep.c: Rename to ...
* arm-netbsd-tdep.c: ... this, adjust include.
* arm-nbsd-tdep.h: Rename to ...
* arm-netbsd-tdep.h: ... this, adjust include.
* configure.nat: Adjust file lists.
* configure.tgt: Likewise.
* hppa-nbsd-nat.c: Rename to ...
* hppa-netbsd-nat.c: ... this, adjust include.
* hppa-nbsd-tdep.c: Rename to ...
* hppa-netbsd-tdep.c: ... this, adjust include.
* i386-nbsd-nat.c: Rename to ...
* i386-netbsd-nat.c: ... this, adjust include.
* i386-nbsd-tdep.c: Rename to ...
* i386-netbsd-tdep.c: ... this, adjust include.
* m68k-bsd-nat.c: Adjust include.
* mips-nbsd-nat.c: Rename to ...
* mips-netbsd-nat.c: ... this, adjust include.
* mips-nbsd-tdep.c: Rename to ...
* mips-netbsd-tdep.c: ... this, adjust include.
* mips-nbsd-tdep.h: Rename to ...
* mips-netbsd-tdep.h: ... this.
* nbsd-nat.c: Rename to ...
* netbsd-nat.c: ... this, adjust include.
* nbsd-nat.h: Rename to ...
* netbsd-nat.h: ... this, adjust include.
* nbsd-tdep.c: Rename to ...
* netbsd-tdep.c: ... this, adjust include.
* nbsd-tdep.h: Rename to ...
* netbsd-tdep.h: ... this.
* ppc-nbsd-nat.c: Rename to ...
* ppc-netbsd-nat.c: ... this, adjust include.
* ppc-nbsd-tdep.c: Rename to ...
* ppc-netbsd-tdep.c: ... this, adjust include and comment.
* ppc-nbsd-tdep.h: Rename to ...
* ppc-netbsd-tdep.h: ... this.
* sh-nbsd-nat.c: Rename to ...
* sh-netbsd-nat.c: ... this, adjust include.
* sh-nbsd-tdep.c: Rename to ...
* sh-netbsd-tdep.c: ... this, adjust include.
* sparc-nbsd-nat.c: Rename to ...
* sparc-netbsd-nat.c: ... this.
* sparc-nbsd-tdep.c: Rename to ...
* sparc-netbsd-tdep.c: ... this, adjust include.
* sparc64-nbsd-nat.c: Rename to ...
* sparc64-netbsd-nat.c: ... this.
* sparc64-nbsd-tdep.c: Rename to ...
* sparc64-netbsd-tdep.c: ... this, adjust include.
* sparc64-tdep.h: Adjust comment.
* vax-bsd-nat.c: Adjust include.
* vax-nbsd-tdep.c: Rename to ...
* vax-netbsd-tdep.c: ... this, adjust include.
|
|
gdb/ChangeLog:
* configure.nat (NATDEPFILES): Add nat/netbsd-nat.o when needed.
|
|
This adds "suspend" and "resume" methods to windows_thread_info, and
changes gdb and gdbserver to share this code.
gdb/ChangeLog
2020-04-08 Tom Tromey <tromey@adacore.com>
* windows-nat.c (thread_rec): Use windows_thread_info::suspend.
(windows_continue): Use windows_continue::resume.
* nat/windows-nat.h (struct windows_thread_info) <suspend,
resume>: Declare new methods.
* nat/windows-nat.c: New file.
* configure.nat (NATDEPFILES): Add nat/windows-nat.o when needed.
gdbserver/ChangeLog
2020-04-08 Tom Tromey <tromey@adacore.com>
* win32-low.c (win32_require_context, suspend_one_thread): Use
windows_thread_info::suspend.
(continue_one_thread): Use windows_thread_info::resume.
* configure.srv (srv_tgtobj): Add windows-nat.o when needed.
|
|
For WOW64 processes, the Wow64* variants of SuspendThread,
GetThreadContext, SetThreadContext, and GetThreadSelectorEntry have to
be used instead.
And instead of EnumProcessModules, EnumProcessModulesEx with
LIST_MODULES_32BIT is necessary.
gdb/ChangeLog:
2020-03-04 Hannes Domani <ssbssa@yahoo.de>
* NEWS: Mention support for WOW64 processes.
* amd64-windows-nat.c (amd64_mappings): Rename and remove static.
(amd64_windows_segment_register_p): Remove static.
(_initialize_amd64_windows_nat): Update.
* configure.nat <windows> (NATDEPFILES): Add i386-windows-nat.o.
* i386-windows-nat.c (context_offset): Update.
(i386_mappings): Rename and remove static.
(i386_windows_segment_register_p): Remove static.
(_initialize_i386_windows_nat): Update.
* windows-nat.c (STATUS_WX86_BREAKPOINT): New macro.
(STATUS_WX86_SINGLE_STEP): New macro.
(EnumProcessModulesEx): New macro.
(Wow64SuspendThread): New macro.
(Wow64GetThreadContext): New macro.
(Wow64SetThreadContext): New macro.
(Wow64GetThreadSelectorEntry): New macro.
(windows_set_context_register_offsets): Add static.
(windows_set_segment_register_p): Likewise.
(windows_add_thread): Adapt for WOW64 processes.
(windows_fetch_one_register): Likewise.
(windows_nat_target::fetch_registers): Likewise.
(windows_store_one_register): Likewise.
(display_selector): Likewise.
(display_selectors): Likewise.
(handle_exception): Likewise.
(windows_continue): Likewise.
(windows_nat_target::resume): Likewise.
(windows_add_all_dlls): Likewise.
(do_initial_windows_stuff): Likewise.
(windows_nat_target::attach): Likewise.
(windows_get_exec_module_filename): Likewise.
(windows_nat_target::create_inferior): Likewise.
(windows_xfer_siginfo): Likewise.
(_initialize_loadable): Initialize Wow64SuspendThread,
Wow64GetThreadContext, Wow64SetThreadContext,
Wow64GetThreadSelectorEntry and EnumProcessModulesEx.
* windows-nat.h (windows_set_context_register_offsets):
Remove declaration.
(windows_set_segment_register_p): Likewise.
(i386_windows_segment_register_p): Add declaration.
(amd64_windows_segment_register_p): Likewise.
|
|
In preparation for RISC-V/Linux `gdbserver' support factor out parts of
native target description determination code that can be shared between
the programs.
gdb/
* nat/riscv-linux-tdesc.h: New file.
* nat/riscv-linux-tdesc.c: New file, taking code from...
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
... here.
* configure.nat <linux> <riscv*>: Add nat/riscv-linux-tdesc.o to
NATDEPFILES.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This fixes these errors:
ld: error: undefined symbol: x86_stopped_by_hw_breakpoint()
>>> referenced by x86-nat.h:109 (../../gdb/x86-nat.h:109)
>>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::stopped_by_hw_breakpoint())
ld: error: undefined symbol: x86_can_use_hw_breakpoint(bptype, int, int)
>>> referenced by x86-nat.h:76 (../../gdb/x86-nat.h:76)
>>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::can_use_hw_breakpoint(bptype, int, int))
ld: error: undefined symbol: x86_insert_hw_breakpoint(gdbarch*, bp_target_info*)
>>> referenced by x86-nat.h:93 (../../gdb/x86-nat.h:93)
>>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::insert_hw_breakpoint(gdbarch*, bp_target_info*))
ld: error: undefined symbol: x86_remove_hw_breakpoint(gdbarch*, bp_target_info*)
>>> referenced by x86-nat.h:97 (../../gdb/x86-nat.h:97)
>>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::remove_hw_breakpoint(gdbarch*, bp_target_info*))
ld: error: undefined symbol: x86_remove_watchpoint(unsigned long, int, target_hw_bp_type, expression*)
>>> referenced by x86-nat.h:89 (../../gdb/x86-nat.h:89)
>>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::remove_watchpoint(unsigned long, int, target_hw_bp_type, expression*))
ld: error: undefined symbol: x86_insert_watchpoint(unsigned long, int, target_hw_bp_type, expression*)
>>> referenced by x86-nat.h:84 (../../gdb/x86-nat.h:84)
>>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::insert_watchpoint(unsigned long, int, target_hw_bp_type, expression*))
ld: error: undefined symbol: x86_stopped_by_watchpoint()
>>> referenced by x86-nat.h:100 (../../gdb/x86-nat.h:100)
>>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::stopped_by_watchpoint())
ld: error: undefined symbol: x86_stopped_data_address(unsigned long*)
>>> referenced by x86-nat.h:103 (../../gdb/x86-nat.h:103)
>>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::stopped_data_address(unsigned long*))
ld: error: undefined symbol: x86_region_ok_for_hw_watchpoint(unsigned long, int)
>>> referenced by x86-nat.h:79 (../../gdb/x86-nat.h:79)
>>> amd64-obsd-nat.o:(x86_nat_target<obsd_nat_target>::region_ok_for_hw_watchpoint(unsigned long, int))
and
ld: error: undefined symbol: x86_dr_insert_watchpoint(x86_debug_reg_state*, target_hw_bp_type, unsigned long, int)
>>> referenced by x86-nat.c:156 (../../gdb/x86-nat.c:156)
>>> x86-nat.o:(x86_insert_watchpoint(unsigned long, int, target_hw_bp_type, expression*))
ld: error: undefined symbol: x86_dr_remove_watchpoint(x86_debug_reg_state*, target_hw_bp_type, unsigned long, int)
>>> referenced by x86-nat.c:169 (../../gdb/x86-nat.c:169)
>>> x86-nat.o:(x86_remove_watchpoint(unsigned long, int, target_hw_bp_type, expression*))
ld: error: undefined symbol: x86_dr_region_ok_for_watchpoint(x86_debug_reg_state*, unsigned long, int)
>>> referenced by x86-nat.c:181 (../../gdb/x86-nat.c:181)
>>> x86-nat.o:(x86_region_ok_for_hw_watchpoint(unsigned long, int))
ld: error: undefined symbol: x86_dr_stopped_data_address(x86_debug_reg_state*, unsigned long*)
>>> referenced by x86-nat.c:194 (../../gdb/x86-nat.c:194)
>>> x86-nat.o:(x86_stopped_data_address(unsigned long*))
ld: error: undefined symbol: x86_dr_stopped_by_watchpoint(x86_debug_reg_state*)
>>> referenced by x86-nat.c:206 (../../gdb/x86-nat.c:206)
>>> x86-nat.o:(x86_stopped_by_watchpoint())
ld: error: undefined symbol: x86_dr_insert_watchpoint(x86_debug_reg_state*, target_hw_bp_type, unsigned long, int)
>>> referenced by x86-nat.c:219 (../../gdb/x86-nat.c:219)
>>> x86-nat.o:(x86_insert_hw_breakpoint(gdbarch*, bp_target_info*))
ld: error: undefined symbol: x86_dr_remove_watchpoint(x86_debug_reg_state*, target_hw_bp_type, unsigned long, int)
>>> referenced by x86-nat.c:233 (../../gdb/x86-nat.c:233)
>>> x86-nat.o:(x86_remove_hw_breakpoint(gdbarch*, bp_target_info*))
ld: error: undefined symbol: x86_dr_stopped_by_hw_breakpoint(x86_debug_reg_state*)
>>> referenced by x86-nat.c:269 (../../gdb/x86-nat.c:269)
>>> x86-nat.o:(x86_stopped_by_hw_breakpoint())
It does not fix:
ld: error: can't create dynamic relocation R_X86_64_64 against symbol: __gmp_binvert_limb_table in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output
>>> defined in /usr/local/lib/libgmp.a(mp_minv_tab.o)
>>> referenced by tmp-dive_1.s
>>> dive_1.o:(__gmpn_divexact_1) in archive /usr/local/lib/libgmp.a
ld: error: can't create dynamic relocation R_X86_64_64 against symbol: __gmp_binvert_limb_table in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output
>>> defined in /usr/local/lib/libgmp.a(mp_minv_tab.o)
>>> referenced by tmp-bdiv_q_1.s
>>> bdiv_q_1.o:(__gmpn_bdiv_q_1) in archive /usr/local/lib/libgmp.a
ld: error: can't create dynamic relocation R_X86_64_64 against symbol: __gmpn_invert_limb_table in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output
>>> defined in /usr/local/lib/libgmp.a(invert_limb_table.o)
>>> referenced by tmp-invert_limb.s
>>> invert_limb.o:(__gmpn_invert_limb) in archive /usr/local/lib/libgmp.a
gdb/ChangeLog:
2019-12-04 Christian Biesinger <cbiesinger@google.com>
* configure.nat (obsd64): Add missing files x86-nat.o and
nat/x86-dregs.o.
Change-Id: I4a443c0cf805efd7b45feaabd729a01b07772724
|
|
This patch implements removal of Cell/B.E. support, including
- Support for the spu-*-* target
- Support for native stand-alone SPU debugging
- Support for integrated debugging of combined PPU/SPU applications
- Remote debugging (gdbserver) support for all the above.
The patch also removes the TARGET_OBJECT_SPU target object type,
as this is available only on Cell/B.E. targets, including
- Native Linux support
- Core file support (including core file generation)
- Remote target support, including removal of the qXfer:spu:read
and qXfer:spu:write remote protocal packets and associated
support in gdbserver.
gdb/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* NEWS: Mention that Cell/B.E. debugging support was removed.
* MAINTAINERS: Remove spu target.
* config/djgpp/fnchange.lst: Remove entries for removed files.
* Makefile.in (ALL_TARGET_OBS): Remove solib-spu.o,
spu-multiarch.o, and spu-tdep.o.
(HFILES_NO_SRCDIR): Remove solib-spu.h and spu-tdep.h.
(ALLDEPFILES): Remove solib-spu.c, spu-linux-nat.c,
spu-multiarch.c, and spu-tdep.c.
* spu-linux-nat.c: Remove file.
* spu-multiarch.c: Remove file.
* spu-tdep.c: Remove file.
* spu-tdep.h: Remove file.
* solib-spu.c: Remove file.
* solib-spu.h: Remove file.
* configure.host (powerpc64*-*-linux*): Remove Cell/B.E. support.
* configure.nat (spu-linux): Remove.
* configure.tgt (powerpc*-*-linux*): Remove solib-spu.o and
solib-multiarch.o from gdb_target_obs.
(spu*-*-*): Remove.
* arch/ppc-linux-common.h (struct ppc_linux_features): Remove "cell"
feature flag.
(ppc_linux_no_features): Update.
* arch/ppc-linux-common.c (ppc_linux_match_description): Remove
Cell/B.E. support.
* arch/ppc-linux-tdesc.h (tdesc_powerpc_cell32l): Remove declaration.
(tdesc_powerpc_cell64l): Likewise.
* nat/ppc-linux.h (PPC_FEATURE_CELL): Remove.
* ppc-linux-nat.c (ppc_linux_nat_target::read_description): Remove
Cell/B.E. support.
* ppc-linux-tdep.h: Do not include "solib-spu.h" or "spu-tdep.h".
Do not include "features/rs6000/powerpc-cell32l.c" or
"features/rs6000/powerpc-cell64l.c".
(ppc_linux_spu_section): Remove.
(ppc_linux_core_read_description): Remove Cell/B.E. support.
(spe_context_objfile, spe_context_lm_addr, spe_context_offset,
spe_context_cache_ptid, spe_context_cache_ptid): Remove.
(ppc_linux_spe_context_lookup): Remove.
(ppc_linux_spe_context_inferior_created): Remove.
(ppc_linux_spe_context_solib_loaded): Remove.
(ppc_linux_spe_context_solib_unloaded): Remove.
(ppc_linux_spe_context): Remove.
(struct ppu2spu_cache): Remove.
(ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register): Remove.
(struct ppu2spu_data): Remove.
(ppu2spu_unwind_register, ppu2spu_sniffer, ppu2spu_dealloc_cache,
ppu2spu_unwind): Remove.
(ppc_linux_init_abi): Remove Cell/B.E. support.
* rs6000-tdep.h (rs6000_gdbarch_init): Remove Cell/B.E. support.
* features/Makefile (rs6000/powerpc-cell32l-expedite): Remove.
(rs6000/powerpc-cell64l-expedite): Likewise
(WHICH): Remove rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
(XMLTOC): Remove rs6000/powerpc-cell32l.xml and
rs6000/powerpc-cell64l.xml.
* features/rs6000/powerpc-cell32l.xml: Remove.
* features/rs6000/powerpc-cell64l.xml: Likewise.
* features/rs6000/powerpc-cell32l.c: Remove generated file.
* features/rs6000/powerpc-cell64l.c: Likewise.
* regformats/rs6000/powerpc-cell32l.dat: Remove generated file.
* regformats/rs6000/powerpc-cell64l.dat: Likewise.
* regformats/reg-spu.dat: Remove.
* target.h (enum target_object): Remove TARGET_OBJECT_SPU.
* corelow.c (struct spuid_list): Remove.
(add_to_spuid_list): Remove.
(core_target::xfer_partial): Remove support for TARGET_OBJECT_SPU.
* remote.c (PACKET_qXfer_spu_read, PACKET_qXfer_spu_write): Remove.
(remote_protocol_features): Remove associated entries.
(_initialize_remote): No longer initialize them.
(remote_target::xfer_partial): Remove support for TARGET_OBJECT_SPU.
* linux-nat.c (SPUFS_MAGIC): Remove.
(linux_proc_xfer_spu): Remove.
(spu_enumerate_spu_ids): Remove.
(linux_nat_target::xfer_partial): Remove support for TARGET_OBJECT_SPU.
* linux-tdep.c (-linux_spu_make_corefile_notes): Remove.
(linux_make_corefile_notes): No longer call it.
* regcache.c (cooked_read_test): Remove bfd_arch_spu special case.
(cooked_write_test): Likewise.
gdb/doc/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* doc/gdb.texinfo (Remote Configuration): Remove documentation for
qXfer:spu:read and qXfer:spu:write.
(General Query Packets): Likewise.
(Cell Broadband Engine SPU architecture): Remove subsection.
gdb/gdbserver/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Remove powerpc-cell32l-ipa.o
and powerpc-cell64l-ipa.o.
(powerpc*-*-linux*): Remove powerpc-cell32l.o and powerpc-cell64l.o
from srv_regobj. Remove rs6000/powerpc-cell32l.xml and
rs6000/powerpc-cell64l.xml from srv_xmlfiles.
(spu*-*-*): Remove.
* spu-low.c: Remove file.
* linux-ppc-low.c (INSTR_SC, NR_spu_run): Remove.
(parse_spufs_run): Remove.
(ppc_get_pc): Remove Cell/B.E. support.
(ppc_set_pc): Likewise.
(ppc_breakpoint_at): Likewise.
(ppc_arch_setup): Likewise.
(ppc_get_ipa_tdesc_idx): Do not handle tdesc_powerpc_cell64l or
tdesc_powerpc_cell32l.
(initialize_low_arch): Do not call init_registers_powerpc_cell64l
or init_registers_powerpc_cell32l.
* linux-ppc-ipa.c (get_ipa_tdesc): Do not handle PPC_TDESC_CELL.
(initialize_low_tracepoint): Do not call init_registers_powerpc_cell64l
or init_registers_powerpc_cell32l.
* linux-ppc-tdesc-init.h (PPC_TDESC_CELL): Mark as unused.
(init_registers_powerpc_cell32l): Remove prototype.
(init_registers_powerpc_cell64l): Likewise.
* target.h (struct target_ops): Remove qxfer_spu member.
* server.c (handle_qxfer_spu): Remove.
(qxfer_packets): Remove entry for "spu".
(handle_query): No longer support qXfer:spu:read or qXfer:spu:write.
* linux-low.c (SPUFS_MAGIC): Remove.
(spu_enumerate_spu_ids): Remove.
(linux_qxfer_spu): Remove.
(linux_target_ops): Remove qxfer_spu member.
* lynx-low.c (lynx_target_ops): Remove qxfer_spu member.
* nto-low.c (nto_target_ops): Remove qxfer_spu member.
* win32-low.c (win32_target_ops): Remove qxfer_spu member.
gdb/testsuite/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.arch/spu-info.exp: Remove file.
* gdb.arch/spu-info.c: Remove file.
* gdb.arch/spu-ls.exp: Remove file.
* gdb.arch/spu-ls.c: Remove file.
* gdb.asm/asm-source.exp: Remove support for spu*-*-*.
* gdb.asm/spu.inc: Remove file.
* gdb.base/dump.exp: Remove support for spu*-*-*.
* gdb.base/stack-checking.exp: Likewise.
* gdb.base/overlays.exp: Likewise.
* gdb.base/ovlymgr.c: Likewise.
* gdb.base/spu.ld: Remove file.
* gdb.cp/bs15503.exp: Remove support for spu*-*-*.
* gdb.cp/cpexprs.exp: Likewise.
* gdb.cp/exception.exp: Likewise.
* gdb.cp/gdb2495.exp: Likewise.
* gdb.cp/mb-templates.exp: Likewise.
* gdb.cp/pr9167.exp: Likewise.
* gdb.cp/userdef.exp: Likewise.
* gdb.xml/tdesc-regs.exp: Remove support for spu*-*-*.
* gdb.cell: Remove directory.
* lib/cell.exp: Remove file.
|
|
changes
..., that is commit 2090129c36c7e582943b7d300968d19b46160d84 causing:
[...]/gdb/gnu-nat.c: In function 'void gnu_ptrace_me()':
[...]/gdb/gnu-nat.c:2133:5: error: 'trace_start_error_with_name' was not declared in this scope
trace_start_error_with_name ("ptrace");
^~~~~~~~~~~~~~~~~~~~~~~~~~~
[...]/gdb/gnu-nat.c:2133:5: note: suggested alternative: 'throw_perror_with_name'
trace_start_error_with_name ("ptrace");
^~~~~~~~~~~~~~~~~~~~~~~~~~~
throw_perror_with_name
[...]/gdb/gnu-nat.c: In function 'void gnu_create_inferior(target_ops*, const char*, const string&, char**, int)':
[...]/gdb/gnu-nat.c:2147:9: error: 'fork_inferior' was not declared in this scope
pid = fork_inferior (exec_file, allargs, env, gnu_ptrace_me,
^~~~~~~~~~~~~
[...]/gdb/gnu-nat.c:2147:9: note: suggested alternative: 'exit_inferior'
pid = fork_inferior (exec_file, allargs, env, gnu_ptrace_me,
^~~~~~~~~~~~~
exit_inferior
[...]/gdb/gnu-nat.c:2174:30: error: 'START_INFERIOR_TRAPS_EXPECTED' was not declared in this scope
gdb_startup_inferior (pid, START_INFERIOR_TRAPS_EXPECTED);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/bin/ld: gnu-nat.o: in function `gnu_ptrace_me()':
[...]/gdb/gnu-nat.c:2134: undefined reference to `trace_start_error_with_name(char const*)'
/usr/bin/ld: gnu-nat.o: in function `gnu_create_inferior(target_ops*, char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, char**, int)':
[...]/gdb/gnu-nat.c:2148: undefined reference to `fork_inferior(char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, char**, void (*)(), void (*)(int), void (*)(), char const*, void (*)(char const*, char* const*, char* const*))'
/usr/bin/ld: fork-child.o: in function `gdb_startup_inferior(int, int)':
[...]/gdb/fork-child.c:136: undefined reference to `startup_inferior(int, int, target_waitstatus*, ptid_t*)'
collect2: error: ld returned 1 exit status
gdb/
* configure.nat [gdb_host == i386gnu] (NATDEPFILES): Add
'nat/fork-inferior.o'.
* gnu-nat.c: #include "nat/fork-inferior.h".
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This moves the various "nat" object files into the nat/ subdirectory.
This allows for the removal of a pattern rule from the gdb Makefile,
which is a small cleanup.
I made the configure.nat change in a (semi-) automated way, hopefully
meaning that it is more likely to be correct than had I done it by
hand.
Eventually I would like for the various configure scripts to only
mention source files, and let the Makefile compute the object file
names.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* configure.nat (NATDEPFILES): Use nat/ prefix.
* Makefile.in (CONFIG_SRC_SUBDIR): Add nat.
(%.o: ${srcdir}/nat/%.c): Remove rule.
(INIT_FILES): Do not filter out NATDEPFILES.
|
|
gdb/ChangeLog:
* config/i386/nm-fbsd.h: Remove file.
* Makefile.in (HFILES_NO_SRCDIR): Remove config/i386/nm-fbsd.h.
* configure.nat: Remove NAT_FILE for FreeBSD/i386.
|
|
gdb/ChangeLog:
* Makefile.in (ALLDEPFILES): Add riscv-fbsd-nat.c.
* NEWS: Mention new FreeBSD/riscv native configuration.
* configure.host: Add riscv*-*-freebsd*.
* configure.nat: Likewise.
* riscv-fbsd-nat.c: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Contributors): Add SRI International and University
of Cambridge for FreeBSD/riscv.
|
|
I've been carrying around the following patch for some time. I noticed
that both i386-sol2-nat.c and i386-v4-nat.c are Solaris-only now and it
seems confusing to carry both around.
So this patch merges i386-v4-nat.c into i386-sol2-nat.c, simplifying it
in a couple of places, like removing checks for macros that are always
defined.
Tested on 64-bit Solaris 11.5/x86 (amd64-pc-solaris2.11) and 32-bit
Solaris 11.3/x86 (i386-pc-solaris2.11) half a year ago.
* i386-v4-nat.c (regmap, supply_gregset, fill_gregset)
(supply_fpregset, fill_fpregset): Move ...
* i386-sol2-nat.c [PR_MODEL_NATIVE != PR_MODEL_LP64]: ... here.
Remove HAVE_GREGSET_T, HAVE_FPREGET_T guards.
Remove references to ioctl-based procfs.
Include <sys/reg.h>.
Remove PR_MODEL_NATIVE guards.
* configure.nat <sol2, i386> (NATDEPFILES): Remove i386-v4-nat.o.
* Makefile.in (ALLDEPFILES): Remove i386-v4-nat.c.
|
|
This adds the target and native configure support, and the NEWS entries for
the new target and native configurations.
gdb/
* Makefile.in (ALL_TARGET_OBS): Add riscv-linux-tdep.c.
(ALLDEPFILES): Add riscv-linux-nat.c, and riscv-linux-tdep.c.
* NEWS: Mention new GNU/Linux RISC-V target.
* configure.host: Add riscv*-*-linux*.
* configure.nat: Add riscv*.
* configure.tgt: Add riscv*-*-linux*.
|
|
Returns 0 for systems without SVE support.
Note the defines taken from Linux kernel headers
in aarch64-sve-linux-ptrace.h.
gdb/
* Makefile.in: Add new header.
* gdb/arch/aarch64.h (sve_vg_from_vl): New macro.
(sve_vl_from_vg): Likewise.
(sve_vq_from_vl): Likewise.
(sve_vl_from_vq): Likewise.
(sve_vq_from_vg): Likewise.
(sve_vg_from_vq): Likewise.
* configure.nat: Add new c file.
* nat/aarch64-sve-linux-ptrace.c: New file.
* nat/aarch64-sve-linux-ptrace.h: New file.
gdbserver/
* configure.srv: Add new c/h file.
|
|
This patch moves the native target wordsize getter for ppc linux to
nat/ so that it can be used to simplify ppc_arch_setup in
gdbserver. The ptrace call used to get MSR for this is ultimately the
same as before, but it is no longer necessary to create a temporary
regcache to call fetch_inferior_registers.
gdb/ChangeLog:
2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com>
* configure.nat <linux powerpc>: Add ppc-linux.o to NATDEPFILES.
* ppc-linux-nat.c (ppc_linux_target_wordsize): Move to
nat/ppc-linux.c.
(ppc_linux_nat_target::auxv_parse): Get thread id tid. Call
ppc_linux_target_wordsize with tid.
(ppc_linux_nat_target::read_description): Call ppc_linux_target
wordsize with tid.
* nat/ppc-linux.c: Include nat/gdb_ptrace.h.
(ppc64_64bit_inferior_p): Add static and inline specifiers.
(ppc_linux_target_wordsize): Move here from ppc-linux-nat.c. Add
tid parameter. Remove static specifier.
* nat/ppc-linux.h (ppc64_64bit_inferior_p): Remove declaration.
(ppc_linux_target_wordsize): New declaration.
gdb/gdbserver/ChangeLog:
2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com>
* linux-ppc-low.c (ppc_arch_setup): Remove code for getting the
wordsize of the inferior. Call ppc_linux_target_wordsize.
|
|
There are only two inf_ptrace_trad_target users, MIPS GNU/Linux and
Alpha GNU/Linux. They both call it via linux_trad_target.
Move this code out of inf-ptrace.c to a GNU/Linux-specific new file.
Making this code be GNU/Linux-specific simplifies C++ification of
target_ops, because we can make the trad target inherit linux_nat
instead of inheriting inf_ptrace. That'll be visible in a later patch.
Note this makes linux_target_install_ops an extern function, but that
is temporary -- the function will disappear once target_ops is made a
C++ class with virtual methods, later in the series. Also, I did not
rename the functions in the new file for a similar reason. They'll be
renamed again anyway in a couple of patches.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* alpha-linux-nat.c: Include "linux-nat-trad.h" instead of
"linux-nat.h".
* configure.nat (alpha-linux, linux-mips): Add linux-nat-trad.o.
* inf-ptrace.c (inf_ptrace_register_u_offset)
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers)
(inf_ptrace_trad_target): Move to ...
* linux-nat-trad.c: ... this new file.
* linux-nat-trad.h: New file.
* linux-nat.c (linux_target_install_ops): Make extern.
(linux_trad_target): Delete.
* linux-nat.h (linux_trad_target): Delete declaration.
(linux_target_install_ops): Declare.
* mips-linux-nat.c: Include "linux-nat-trad.h" instead of
"linux-nat.h".
|
|
Support for m88k was fully removed from bfd, which broke gdb
--enable-targets=all builds:
> gdb/m88k-tdep.c: In function void _initialize_m88k_tdep():
> gdb/m88k-tdep.c:867:21: error: bfd_arch_m88k was not declared in this scope
> gdbarch_register (bfd_arch_m88k, m88k_gdbarch_init, NULL);
There's no point in keeping GDB support for OpenBSD/m88k with no bfd
support, so this commit simply removes the port.
gdb/ChangeLog:
2018-04-16 Pedro Alves <palves@redhat.com>
* MAINTAINERS: Remove m88k.
* Makefile.in (ALL_TARGET_OBS): Remove m88k-tdep.o.
(HFILES_NO_SRCDIR): Remove m88k-tdep.h.
(ALLDEPFILES): Remove m88k-bsd-nat.c and m88k-tdep.c.
* NEWS: Mention that support for OpenBSD/m88k was removed.
* configure.host (m88*-*-*): Remove support.
* configure.nat (m88k-*-*): Remove support.
* configure.tgt (m88*-*-openbsd*): Remove.
* m88k-bsd-nat.c, m88k-tdep.c, m88k-tdep.h: Delete.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
Add missing file to NATDEPFILES.
gdb/ChangeLog:
2017-11-24 Ulrich Weigand <uweigand@de.ibm.com>
* configure.nat <spu-linux>: Add fork-inferior.o to NATDEPFILES.
|
|
gdb/ChangeLog:
* Makefile.in (ALLDEPFILES): Add arm-fbsd-nat.c.
* NEWS: Mention new FreeBSD/arm native configuration.
* configure.host: Add arm*-*-freebsd*.
* configure.nat: Likewise.
* arm-fbsd-nat.c: New file.
|
|
Given that GCC has obsoleted/removed support for Solaris 9 in GCC 4.9/5 in 2013:
https://gcc.gnu.org/gcc-4.9/changes.html
https://gcc.gnu.org/ml/gcc-patches/2013-05/msg00728.html
and the last gdb version that can be compiled with gcc 4.9 is 7.12.1 only when
configured with --disable-build-with-cxx, it's time to obsolete/remove support
for Solaris < 10.
This patch does this, simplifying configure.nat along the way (only a single
sol2 configuration with variants for i386 and sparc).
Some configure checks for older Solaris versions can go, too, and the check
for libthread_db.so.1 removed:
* Since Solaris 10, dlopen has moved to libc and libdl.so is just a
filter on ld.so.1, so no need to check.
* $RDYNAMIC is already handled above (and is a no-op with Solaris ld
anyway).
Both proc-service.c and sol-thread.c lose support for (Solaris-only)
PROC_SERVICE_IS_OLD.
The attached revised patch has been tested on sparcv9-sun-solaris2.10,
sparcv9-sun-solaris2.11.4, amd64-pc-solaris2.10, amd64-pc-solaris2.11.4,
and x86_64-pc-linux-gnu.
I've also started an i386-pc-solaris2.9 build to check that it really
stops as expected.
PR gdb/22185
* configure.host <*-*-solaris2.[01], *-*-solaris2.[2-9]*>: Mark as
obsolete.
Use gdb_host sol2 for i[34567]86-*-solaris2*, x86_64-*-solaris2*.
Remove i386sol2 support.
* configure.nat <i386sol2>: Remove.
<sol2-64>: Fold into ...
<sol2>: ... this.
Move common settings to default section.
Add sol-thread.o.
* configure.tgt <i[34567]86-*-solaris2.1[0-9]*,
x86_64-*-solaris2.1[0-9]*>: Rename to ...
<i[34567]86-*-solaris2*, x86_64-*-solaris2*>: ... this.
<i[34567]86-*-solaris*>: Remove.
<sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*>: Remove.
* configure.ac: Remove wctype in libw check.
(_MSE_INT_H): Don't define on Solaris 7-9.
<solaris*>: Remove libthread_db.so.1 check.
* configure: Regenerate.
* config.in: Regenerate.
* proc-service.c: Remove PROC_SERVICE_IS_OLD handling.
(gdb_ps_prochandle_t, gdb_ps_read_buf_t, gdb_ps_write_buf_t)
(gdb_ps_size_t): Remove.
Use base types in users.
* sol-thread.c: Likewise, also for gdb_ps_addr_t.
* NEWS (Changes since GDB 8.0): Document Solaris 2.0-9 removal.
|
|
I just tried to compile gdb trunk on Solaris 11.4 (formerly 12), and
failed for a couple of reasons:
*
In file included from /usr/include/python2.7/Python.h:128:0,
from /vol/src/gnu/gdb/gdb/dist/gdb/python/python-internal.h:94,
from /vol/src/gnu/gdb/gdb/dist/gdb/python/py-instruction.h:23,
from /vol/src/gnu/gdb/gdb/dist/gdb/python/py-instruction.c:21:
/usr/include/python2.7/ceval.h:67:0: error: ignoring #pragma no_inline [-Werror=unknown-pragmas]
#pragma no_inline(PyEval_EvalFrameEx)
^
New in Solaris 11.4: <python2.7/ceval.h> uses a Studio-only #pragma.
I've disabled the warning in warnings.m4.
*
/vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c: In function ‘int pipe_open(serial*, const char*)’:
/vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c:77:9: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations]
pid = vfork ();
^
/vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c:77:16: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations]
pid = vfork ();
^
Since Solaris 11, vfork () is marked deprecated in <unistd.h>.
cf. vfork(2):
The vfork() and vforkx() functions are deprecated. Their sole legiti-
mate use as a prelude to an immediate call to a function from the exec
family can be achieved safely by posix_spawn(3C) or posix_spawnp(3C).
Again, I've disabled the warning.
*
/vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c: In function ‘void shell_escape(const char*, int)’:
/vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c:750:14: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations]
if ((pid = vfork ()) == 0)
^
/vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c:750:21: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations]
if ((pid = vfork ()) == 0)
^
Same problem.
*
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_init_inferior(target_ops*, int)’:
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:4380:30: error: ‘START_INFERIOR_TRAPS_EXPECTED’ was not declared in this scope
gdb_startup_inferior (pid, START_INFERIOR_TRAPS_EXPECTED);
^
defined in nat/fork-inferior.h, need to include that header
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_create_inferior(target_ops*, const char*, const string&, char**, int)’:
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:4605:38: error: ‘fork_inferior’ was not declared in this scope
NULL, NULL, shell_file, NULL);
^
likewise
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_info_proc(target_ops*, const char*, info_proc_what)’:
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:5124:20: error: ‘argv’ was not declared in this scope
for (char *arg : argv)
^
Typo, should be built_argv instead!
*
Undefined first referenced
symbol in file
fork_inferior(char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, char**, void (*)(), void (*)(int), void (*)(), char const*, void (*)(char const*, char* const*, char* const*)) procfs.o
startup_inferior(int, int, target_waitstatus*, ptid_t*) fork-child.o
ld: fatal: symbol referencing errors
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:2249: gdb] Error 1
Need to add fork-inferior.o to NATDEPFILES.
With the changes below, I can build gdb on sparcv9-sun-solaris2.11 and
amd64-pc-solaris2.11 and a simple smoke test (gdb/gdb gdb/gdb) works.
|
|
NetBSD ships with gcore(1) againg since the version 2.0.
This tool is functional and actively maintained.
gdb/ChangeLog
2017-09-06 Kamil Rytarowski <n54@gmx.com>
* configure.nat: Define HAVE_NATIVE_GCORE_HOST on NetBSD.
|
