aboutsummaryrefslogtreecommitdiff
path: root/gdb/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2014-11-21Include alloca.h unconditionallyYao Qi1-1/+0
Since gnulib alloca module was imported, we can include alloca.h in both gdb and gdbserver unconditionally, so this patch adds inclusion of alloca.h in common-defs.h. This patch also removes AC_FUNC_ALLOCA in configure.ac because we don't need to check alloca any more. This patch below is removed in fact. [RFA/commit] include alloca.h if available. https://www.sourceware.org/ml/gdb-patches/2010-08/msg00566.html Since alloca.h is from gnulib now, we don't have to check malloc.h in configure and include malloc.h in code. This patch also remove them too. gdb: 2014-11-21 Yao Qi <yao@codesourcery.com> * common/common-defs.h: Include alloca.h * configure.ac: Don't invoke AC_FUNC_ALLOCA. * configure: Re-generated. * defs.h: Remove code handling alloca. * utils.c (gdb_realpath): Don't check HAVE_ALLOCA is defined or not. gdb/gdbserver: 2014-11-21 Yao Qi <yao@codesourcery.com> * configure.ac: Don't invoke AC_FUNC_ALLOCA. (AC_CHECK_HEADERS): Remove malloc.h. * configure: Re-generated. * config.in: Re-generated. * server.h: Don't include alloca.h and malloc.h. * gdbreplay.c: Don't check HAVE_ALLOCA_H is defined. Don't include malloc.h.
2014-10-17Delete Tru64 supportPedro Alves1-27/+0
This commit does most of the mechanical removal. IOW, the easy part. procfs.c isn't touched beyond removing a couple obvious bits that are guarded by a couple macros defined in config/alpha/nm-osf3.h. Going beyond that for procfs.c & co would be a harder excision that potentially affects Solaris. Some comments in the generic alpha code ABIs that may still be relevant and I wouldn't know what to do with them. That can always be done on a separate pass, preferably by someone who can test on alpha. A couple other spots have references to OSF/Tru64 and related files being removed, but it felt like removing them would make things worse, not better. We can revisit those when we next need to touch that code. I didn't remove a reference to osf in testsuite/lib/future.exp, as I believe that code is imported from DejaGNU. Built and tested on x86_64 Fedora 20, with --enable-targets=all. Tested that building for --target=alpha-osf3 on x86_64 Fedora 20 fails with: checking for default auto-load directory... $debugdir:$datadir/auto-load checking for default auto-load safe-path... $debugdir:$datadir/auto-load *** Configuration alpha-unknown-osf3 is obsolete. *** Support has been REMOVED. make[1]: *** [configure-gdb] Error 1 make[1]: Leaving directory `build-osf' make: *** [all] Error 2 gdb/ 2014-10-17 Pedro Alves <palves@redhat.com> * Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o. (HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h. (ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and solib-osf.c. * NEWS: Mention that support for alpha*-*-osf* has been removed. * ada-lang.h [__alpha__ && __osf__] (ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete. * alpha-nat.c, alpha-osf1-tdep.c: Delete files. * alpha-tdep.c (alpha_gdbarch_init): Remove reference to GDB_OSABI_OSF1. * config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete files. * config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh) (config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete. * configure: Regenerate. * configure.ac: Remove references to osf. * configure.host: Handle alpha*-*-osf* in the obsolete hosts section. Remove all other references to osf. * configure.tgt: Add alpha*-*-osf* to the obsolete targets section. Remove all other references to osf. * dec-thread.c: Delete file. * defs.h (GDB_OSABI_OSF1): Delete. * inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally defined. * osabi.c (gdb_osabi_names): Delete "OSF/1". * procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]: Delete code. (unconditionally_kill_inferior) [PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code. * solib-osf.c: Delete file. gdb/testsuite/ 2014-10-17 Pedro Alves <palves@redhat.com> * gdb.base/callfuncs.exp: emove references to osf. * gdb.base/sigall.exp: Likewise. * gdb.gdb/selftest.exp: Likewise. * gdb.hp/gdb.base-hp/callfwmall.exp: Likewise. * gdb.mi/non-stop.c: Likewise. * gdb.mi/pthreads.c: Likewise. * gdb.reverse/sigall-precsave.exp: Likewise. * gdb.reverse/sigall-reverse.exp: Likewise. * gdb.threads/pthreads.c: Likewise. * gdb.threads/pthreads.exp: Likewise. gdb/doc/ 2014-10-17 Pedro Alves <palves@redhat.com> * gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64. (SVR4 Process Information): Delete mention of OSF/1.
2014-10-10Delete IRIX supportPedro Alves1-13/+0
This does most of the mechanical removal. IOW, the easy part. This doesn't touch procfs.c as that'd be a harder excision, potentially affecting Solaris. mips-tdep.c is left alone. E.g., I didn't delete the GDB_OSABI_IRIX enum value, nor references to it in mips-tdep.c. Some comments mentioning IRIX ABIs may still be relevant and I wouldn't know what to do with them. in That can always be done on a separate pass, preferably by someone who can test on MIPS. I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I believe that code is imported from DejaGNU. Built and tested on x86_64 Fedora 20, with --enable-targets=all. Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20 fails with: checking for default auto-load directory... $debugdir:$datadir/auto-load checking for default auto-load safe-path... $debugdir:$datadir/auto-load *** Configuration mips-sgi-irix6 is obsolete. *** Support has been REMOVED. make[1]: *** [configure-gdb] Error 1 make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix' make: *** [all] Error 2 gdb/ 2014-10-10 Pedro Alves <palves@redhat.com> * Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o. (ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c. (HFILES_NO_SRCDIR): Remove solib-irix.h. * NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6* and been removed. * config/mips/irix5.mh, config/mips/irix6.mh: Delete files. * configure.ac: Remove references to IRIX. * configure.host: Add *-*-irix* to the obsolete hosts section. Remove all other references to irix. * irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h: Delete files. gdb/testsuite/ 2014-10-10 Pedro Alves <palves@redhat.com> * gdb.base/bigcore.exp: Remove references to IRIX. * gdb.base/funcargs.exp: Likewise. * gdb.base/interrupt.exp: Likewise. * gdb.base/mips_pro.exp: Likewise. * gdb.base/nodebug.exp: Likewise. * gdb.base/setvar.exp: Likewise. * lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
2014-09-09PR guile/17367Doug Evans1-3/+11
gdb/ChangeLog: * acinclude.m4 (GDB_GUILE_PROGRAM_NAMES): Pass guile version as last parameter to pkg-config, not first. * configure.ac: Pass --with-guile provided pkg-config path to GDB_GUILE_PROGRAM_NAMES. * configure: Regenerate.
2014-09-08Fix for PR 17247: Block SIGCHLD while initializing Guile.Doug Evans1-5/+0
The problem here is that if a thread other than gdb's main thread gets a SIGCHLD (it's an asynchronous signal so the kernel will essentially pick a random thread) then gdb will hang if it is in sigsuspend when the SIGCHLD is delivered. The other thread will see the signal and the sigsuspend won't "wake up". Guile and libgc should be blocking SIGCHLD in their threads, but we need to work with Guile 2.0 and libgc 7.4. The problem first shows up in libgc 7.4 because it is the first release that enables multiple marker threads by default. gdb/ChangeLog: PR 17247 * guile.c: #include <signal.h>. (_initialize_guile): Block SIGCHLD while initializing Guile. Replaces the following, which is reverted. 2014-07-26 Doug Evans <xdje42@gmail.com> PR 17185 * configure.ac: Add check for header gc/gc.h. Add check for function setenv. * configure: Regenerate. * config.in: Regenerate. * guile/guile.c (_initialize_guile): Add workaround for libgc 7.4.0.
2014-08-29Introduce common/gdb_setjmp.hGary Benson1-11/+0
This commit creates a new file, common/gdb_setjmp.h, to hold some portability macros for setjmp/longjmp et al. that are used by the exceptions subsystem and by the demangler crash catcher. gdb/ChangeLog: * common/gdb_setjmp.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_setjmp.h. * configure.ac: Move sigsetjmp check... * common/common.m4: ...here. * configure: Regenerate. * cp-support.c (SIGJMP_BUF): Delete. (SIGSETJMP): Likewise. (SIGLONGJMP): Likewise. * exceptions.h (gdb_setjmp.h): Include. (setjmp.h): Do not include. (EXCEPTIONS_SIGJMP_BUF): Delete. (EXCEPTIONS_SIGSETJMP): Likewise. (EXCEPTIONS_SIGLONGJMP): Likewise. Replace all uses of EXCEPTIONS_SIG* macros with SIG* macros from gdb_setjmp.h. * exceptions.c: Likewise. gdb/gdbserver/ChangeLog: * config.in: Regenerate. * configure: Likewise.
2014-08-13Fix build/17104Yao Qi1-0/+1
This patch is to fix the build error when GDB is configured as: CFLAGS=-Wall ./configure --with-babeltrace; make This patch adds one line of code in configure test to use local variable 'pos'. Note that we append -Werror to CFLAGS to catch the warning related to assignment to scope. See more in this thread https://sourceware.org/ml/gdb-patches/2014-08/msg00045.html 2014-08-13 Yao Qi <yao@codesourcery.com> PR build/17104 * configure.ac: Use local variable 'pos'. * configure: Regenerated.
2014-07-26PR guile/17146Doug Evans1-0/+13
* acinclude.m4 (GDB_GUILE_PROGRAM_NAMES): New macro. (GDB_GUILD_TARGET_FLAG, GDB_TRY_GUILD): New macros. * configure.ac: Try to use guild to compile an scm file, if it fails then disable guile support. * configure: Regenerate. * data-directory/Makefile.in (GUILE_SOURCE_FILES): Renamed from GUILE_FILE_LIST. (GUILE_COMPILED_FILES): New variable. (GUILE_FILES) Update. (GUILD, GUILD_TARGET_FLAG, GUILD_COMPILE_FLAGS): New variables. (stamp-guile): Compile scm files. * guile/guile.c (boot_guile_support): New function. (standard_throw_args_p): New function. (print_standard_throw_error, print_throw_error): New functions. (handle_boot_error): New function. (initialize_scheme_side): Rewrite to call boot_guile_support. * guile/lib/gdb/boot.scm: Update %load-compiled-path. Load gdb.go. * guile/lib/gdb/init.scm (%silence-compiler-warnings%): New function.
2014-07-26PR build/17105.Doug Evans1-0/+2
Tested with/without guile,python on amd64-linux. I'm not sure we still have to deal with shells that can't handle empty for lists, but I played it safe. Otherwise this patch would be a lot smaller (though a diff -b will still show the real changes). PR build/17105 * configure.ac: Add AM_CONDITIONALs for HAVE_PYTHON, HAVE_GUILE. * configure: Regenerate. * data-directory/Makefile.in (PYTHON_FILE_LIST): Renamed from PYTHON_FILES. (PYTHON_FILES): New variable. (GUILE_FILE_LIST): Renamed from GUILE_FILES. (GUILE_FILES): New variable. (stamp-python, install-python, uninstall-python): Handle empty file list. (stamp-guile, install-guile, uninstall-guile): Ditto.
2014-07-26PR 17185Doug Evans1-0/+5
PR 17185 describes a problem with using gdb+guile with libgc 7.4.0. The symptom is a hang in sigsuspend. [The thread referenced in the PR has the details.] It's not clear what the right fix is, or even where the bug is yet. This patch applies the same workaround Guile has applied. There is no functionality or real performance loss with this, and Guile has been using it for awhile. * configure.ac: Add check for header gc/gc.h. Add check for function setenv. * configure: Regenerate. * config.in: Regenerate. * guile/guile.c (_initialize_guile): Add workaround for libgc 7.4.0.
2014-06-19Demangler crash handlerGary Benson1-1/+1
This commit wraps calls to the demangler with a segmentation fault handler. The first time a segmentation fault is caught a core file is generated and the user is prompted to file a bug and offered the choice to exit or to continue their GDB session. A maintainence option is provided to allow the user to disable the crash handler if required. gdb/ 2014-06-19 Gary Benson <gbenson@redhat.com> * configure.ac [AC_CHECK_FUNCS] <sigaltstack>: New check. * configure: Regenerate. * config.in: Likewise. * main.c (signal.h): New include. (setup_alternate_signal_stack): New function. (captured_main): Call the above. * cp-support.c (signal.h): New include. (catch_demangler_crashes): New flag. (SIGJMP_BUF): New define. (SIGSETJMP): Likewise. (SIGLONGJMP): Likewise. (gdb_demangle_jmp_buf): New static global. (gdb_demangle_attempt_core_dump): Likewise. (gdb_demangle_signal_handler): New function. (gdb_demangle): If catch_demangler_crashes is set, install the above signal handler before calling bfd_demangle, and restore the original signal handler afterwards. Display the offending symbol and call demangler_warning the first time a segmentation fault is caught. (_initialize_cp_support): New maint set/show command. gdb/doc/ 2014-06-19 Gary Benson <gbenson@redhat.com> * gdb.texinfo (Maintenance Commands): Document new "maint set/show catch-demangler-crashes" option.
2014-06-05Make it easy to make --disable-werror the default for both binutils and gdbJoel Brobecker1-1/+1
The goal of this patch is to provide an easy way to make --disable-werror the default when building binutils, or the parts of binutils that need to get built when building GDB. In development mode, we want to continue making -Werror the default with GCC. But, when making releases, I think we want to make it as easy as possible for regular users to successfully build from sources. GDB already has this kind of feature to turn -Werror as well as the use of the libmcheck library. As GDB Release Manager, I take advantage of it to turn those off after having cut the branch. I'd like to be able to do the same for the binutils bits. And perhaps Tristan will want to do the same for his releases too (not sure, binutils builders might be a little savvier than GDB builders). This patch introduces a new file, called development.sh, which just sets a variable called $development. In our development branches (Eg. "master"), it's set to true. But setting it to false would allow us to change the default behavior of various development-related features to be turned off; in this case, it turns off the use of -Werror by default (use --enable-werror to turn it back on). bfd/ChangeLog: * development.sh: New file. * warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh. Make -Werror the default with GCC only if DEVELOPMENT is true. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add $(srcdir)/development.sh. * Makefile.in, configure: Regenerate. binutils/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gas/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gold/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): New. * Makefile.in, configure: Regenerate. gprof/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. ld/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. opcodes/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gdb/ChangeLog: * development.sh: Delete. * Makefile.in (config.status): Adjust dependency on development.sh. * configure.ac: Adjust development.sh source call. * configure: Regenerate. gdb/gdbserver/ChangeLog: * configure.ac: Adjust development.sh source call. * Makefile.in (config.status): Adjust dependency on development.sh. * configure: Regenerate. Tested on x86_64-linux by building two ways: One with DEVELOPMENT set to true, and one with DEVELOPMENT set to false. In the first case, I could see the use of -Werror, while it disappeared in the second case.
2014-06-01guile: Allow compilation with Guile <= 2.0.5.Ludovic Courtès1-0/+9
gdb/ 2014-06-01 Ludovic Courtès <ludo@gnu.org> * configure.ac: When Guile is available, check for the availability of 'scm_new_smob'. * configure, config.h.in: Regenerate. * guile/guile-internal.h (scm_new_smob) [!HAVE_SCM_NEW_SMOB]: New function.
2014-05-26Add configure support for building with guile 2.2.Andy Wingo1-1/+1
* configure.ac (try_guile_versions): Allow building with guile 2.2. * configure: Regenerate.
2014-02-10Don't crash if pkg-config is not found and guile wasn't explicitly requested.Doug Evans1-17/+24
* configure.ac: Don't crash if pkg-config is not found and guile wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR in guile checks. * configure: Regenerate.
2014-02-09Add Guile as an extension language.Doug Evans1-0/+148
* NEWS: Mention Guile scripting. * Makefile.in (SUBDIR_GUILE_OBS): New variable. (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables. (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS. (CLIBS): Add GUILE_LIBS. (install-guile): New rule. (guile.o): New rule. (scm-arch.o, scm-auto-load.o, scm-block.o): New rules. (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules. (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules. (scm-math.o, scm-objfile.o, scm-ports.o): New rules. (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules. (scm-string.o, scm-symbol.o, scm-symtab.o): New rules. (scm-type.o, scm-utils.o, scm-value.o): New rules. * configure.ac: New option --with-guile. * configure: Regenerate. * config.in: Regenerate. * auto-load.c: Remove #include "python/python.h". Add #include "gdb/section-scripts.h". (source_section_scripts): Handle Guile scripts. (_initialize_auto_load): Add name of Guile objfile script to scripts-directory help text. * breakpoint.c (condition_command): Tweak comment to include Scheme. * breakpoint.h (gdbscm_breakpoint_object): Add forward decl. (struct breakpoint): New member scm_bp_object. * defs.h (enum command_control_type): New value guile_control. * cli/cli-cmds.c: Remove #include "python/python.h". Add #include "extension.h". (show_user): Update comment. (_initialize_cli_cmds): Update help text for "show user". Update help text for max-user-call-depth. * cli/cli-script.c: Remove #include "python/python.h". Add #include "extension.h". (multi_line_command_p): Add guile_control. (print_command_lines): Handle guile_control. (execute_control_command, recurse_read_control_structure): Ditto. (process_next_line): Recognize "guile" commands. * disasm.c (gdb_disassemble_info): Make non-static. * disasm.h: #include "dis-asm.h". (struct gdbarch): Add forward decl. (gdb_disassemble_info): Declare. * extension.c: #include "guile/guile.h". (extension_languages): Add guile. (get_ext_lang_defn): Handle EXT_LANG_GDB. * extension.h (enum extension_language): New value EXT_LANG_GUILE. * gdbtypes.c (get_unsigned_type_max): New function. (get_signed_type_minmax): New function. * gdbtypes.h (get_unsigned_type_max): Declare. (get_signed_type_minmax): Declare. * guile/README: New file. * guile/guile-internal.h: New file. * guile/guile.c: New file. * guile/guile.h: New file. * guile/scm-arch.c: New file. * guile/scm-auto-load.c: New file. * guile/scm-block.c: New file. * guile/scm-breakpoint.c: New file. * guile/scm-disasm.c: New file. * guile/scm-exception.c: New file. * guile/scm-frame.c: New file. * guile/scm-gsmob.c: New file. * guile/scm-iterator.c: New file. * guile/scm-lazy-string.c: New file. * guile/scm-math.c: New file. * guile/scm-objfile.c: New file. * guile/scm-ports.c: New file. * guile/scm-pretty-print.c: New file. * guile/scm-safe-call.c: New file. * guile/scm-string.c: New file. * guile/scm-symbol.c: New file. * guile/scm-symtab.c: New file. * guile/scm-type.c: New file. * guile/scm-utils.c: New file. * guile/scm-value.c: New file. * guile/lib/gdb.scm: New file. * guile/lib/gdb/boot.scm: New file. * guile/lib/gdb/experimental.scm: New file. * guile/lib/gdb/init.scm: New file. * guile/lib/gdb/iterator.scm: New file. * guile/lib/gdb/printing.scm: New file. * guile/lib/gdb/types.scm: New file. * data-directory/Makefile.in (GUILE_SRCDIR): New variable. (VPATH): Add $(GUILE_SRCDIR). (GUILE_DIR): New variable. (GUILE_INSTALL_DIR, GUILE_FILES): New variables. (all): Add stamp-guile dependency. (stamp-guile): New rule. (clean-guile, install-guile, uninstall-guile): New rules. (install-only): Add install-guile dependency. (uninstall): Add uninstall-guile dependency. (clean): Add clean-guile dependency. doc/ * Makefile.in (GDB_DOC_FILES): Add guile.texi. * gdb.texinfo (Auto-loading): Add set/show auto-load guile-scripts. (Extending GDB): New menu entries Guile, Multiple Extension Languages. (Guile docs): Include guile.texi. (objfile-gdbdotext file): Add objfile-gdb.scm. (dotdebug_gdb_scripts section): Mention Guile scripts. (Multiple Extension Languages): New node. * guile.texi: New file. testsuite/ * configure.ac (AC_OUTPUT): Add gdb.guile. * configure: Regenerate. * lib/gdb-guile.exp: New file. * lib/gdb.exp (get_target_charset): New function. * gdb.base/help.exp: Update expected output from "apropos apropos". * gdb.guile/Makefile.in: New file. * gdb.guile/guile.exp: New file. * gdb.guile/scm-arch.c: New file. * gdb.guile/scm-arch.exp: New file. * gdb.guile/scm-block.c: New file. * gdb.guile/scm-block.exp: New file. * gdb.guile/scm-breakpoint.c: New file. * gdb.guile/scm-breakpoint.exp: New file. * gdb.guile/scm-disasm.c: New file. * gdb.guile/scm-disasm.exp: New file. * gdb.guile/scm-equal.c: New file. * gdb.guile/scm-equal.exp: New file. * gdb.guile/scm-error.exp: New file. * gdb.guile/scm-error.scm: New file. * gdb.guile/scm-frame-args.c: New file. * gdb.guile/scm-frame-args.exp: New file. * gdb.guile/scm-frame-args.scm: New file. * gdb.guile/scm-frame-inline.c: New file. * gdb.guile/scm-frame-inline.exp: New file. * gdb.guile/scm-frame.c: New file. * gdb.guile/scm-frame.exp: New file. * gdb.guile/scm-generics.exp: New file. * gdb.guile/scm-gsmob.exp: New file. * gdb.guile/scm-iterator.c: New file. * gdb.guile/scm-iterator.exp: New file. * gdb.guile/scm-math.c: New file. * gdb.guile/scm-math.exp: New file. * gdb.guile/scm-objfile-script-gdb.in: New file. * gdb.guile/scm-objfile-script.c: New file. * gdb.guile/scm-objfile-script.exp: New file. * gdb.guile/scm-objfile.c: New file. * gdb.guile/scm-objfile.exp: New file. * gdb.guile/scm-ports.exp: New file. * gdb.guile/scm-pretty-print.c: New file. * gdb.guile/scm-pretty-print.exp: New file. * gdb.guile/scm-pretty-print.scm: New file. * gdb.guile/scm-section-script.c: New file. * gdb.guile/scm-section-script.exp: New file. * gdb.guile/scm-section-script.scm: New file. * gdb.guile/scm-symbol.c: New file. * gdb.guile/scm-symbol.exp: New file. * gdb.guile/scm-symtab-2.c: New file. * gdb.guile/scm-symtab.c: New file. * gdb.guile/scm-symtab.exp: New file. * gdb.guile/scm-type.c: New file. * gdb.guile/scm-type.exp: New file. * gdb.guile/scm-value-cc.cc: New file. * gdb.guile/scm-value-cc.exp: New file. * gdb.guile/scm-value.c: New file. * gdb.guile/scm-value.exp: New file. * gdb.guile/source2.scm: New file. * gdb.guile/types-module.cc: New file. * gdb.guile/types-module.exp: New file.
2014-02-05Extension Language APIDoug Evans1-5/+4
* configure.ac (libpython checking): Remove all but python.o from CONFIG_OBS. Remove all but python.c from CONFIG_SRCS. * configure: Regenerate. * Makefile.in (SFILES): Add extension.c. (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h (COMMON_OBS): Add extension.o. * extension.h: New file. * extension-priv.h: New file. * extension.c: New file. * python/python-internal.h: #include "extension.h". (gdbpy_auto_load_enabled): Declare. (gdbpy_apply_val_pretty_printer): Declare. (gdbpy_apply_frame_filter): Declare. (gdbpy_preserve_values): Declare. (gdbpy_breakpoint_cond_says_stop): Declare. (gdbpy_breakpoint_has_cond): Declare. (void source_python_script_for_objfile): Delete. * python/python.c: #include "extension-priv.h". Delete inclusion of "observer.h". (extension_language_python): Moved here and renamed from script_language_python in py-auto-load.c. Redefined to be of type extension_language_defn. (python_extension_script_ops): New global. (python_extension_ops): New global. (struct python_env): New member previous_active. (restore_python_env): Call restore_active_ext_lang. (ensure_python_env): Call set_active_ext_lang. (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static. New arg extlang. (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static. New arg extlang. (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static. New arg extlang. (gdbpy_eval_from_control_command): Renamed from eval_python_from_control_command, made static. New arg extlang. (gdbpy_source_script) Renamed from source_python_script, made static. New arg extlang. (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change result to int. New arg extlang. (gdbpy_source_objfile_script): Renamed from source_python_script_for_objfile, made static. New arg extlang. (gdbpy_start_type_printers): Renamed from start_type_printers, made static. New args extlang, extlang_printers. Change result type to "void". (gdbpy_apply_type_printers): Renamed from apply_type_printers, made static. New arg extlang. Rename arg printers to extlang_printers and change type to ext_lang_type_printers *. (gdbpy_free_type_printers): Renamed from free_type_printers, made static. Replace argument arg with extlang, extlang_printers. (!HAVE_PYTHON, eval_python_from_control_command): Delete. (!HAVE_PYTHON, source_python_script): Delete. (!HAVE_PYTHON, gdbpy_should_stop): Delete. (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete. (!HAVE_PYTHON, start_type_printers): Delete. (!HAVE_PYTHON, apply_type_printers): Delete. (!HAVE_PYTHON, free_type_printers): Delete. (_initialize_python): Delete call to observer_attach_before_prompt. (finalize_python): Set/restore active extension language. (gdbpy_finish_initialization) Renamed from finish_python_initialization, made static. New arg extlang. (gdbpy_initialized): New function. * python/python.h: #include "extension.h". Delete #include "value.h", "mi/mi-cmds.h". (extension_language_python): Declare. (GDBPY_AUTO_FILE_NAME): Delete. (enum py_bt_status): Moved to extension.h and renamed to ext_lang_bt_status. (enum frame_filter_flags): Moved to extension.h. (enum py_frame_args): Moved to extension.h and renamed to ext_lang_frame_args. (finish_python_initialization): Delete. (eval_python_from_control_command): Delete. (source_python_script): Delete. (apply_val_pretty_printer): Delete. (apply_frame_filter): Delete. (preserve_python_values): Delete. (gdbpy_script_language_defn): Delete. (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete. (start_type_printers, apply_type_printers, free_type_printers): Delete. * auto-load.c: #include "extension.h". (GDB_AUTO_FILE_NAME): Delete. (auto_load_gdb_scripts_enabled): Make public. New arg extlang. (script_language_gdb): Delete, moved to extension.c and renamed to extension_language_gdb. (source_gdb_script_for_objfile): Delete. (auto_load_pspace_info): New member unsupported_script_warning_printed. (loaded_script): Change type of language member to struct extension_language_defn *. (init_loaded_scripts_info): Initialize unsupported_script_warning_printed. (maybe_add_script): Make static. Change type of language arg to struct extension_language_defn *. (clear_section_scripts): Reset unsupported_script_warning_printed. (auto_load_objfile_script_1): Rewrite to use extension language API. (auto_load_objfile_script): Make public. Remove support-compiled-in and auto-load-enabled checks, moved to auto_load_scripts_for_objfile. (source_section_scripts): Rewrite to use extension language API. (load_auto_scripts_for_objfile): Rewrite to use auto_load_scripts_for_objfile. (collect_matching_scripts_data): Change type of language member to struct extension_language_defn *. (auto_load_info_scripts): Change type of language arg to struct extension_language_defn *. (unsupported_script_warning_print): New function. (script_not_found_warning_print): Make static. (_initialize_auto_load): Rewrite construction of scripts-directory help. * auto-load.h (struct objfile): Add forward decl. (struct script_language): Delete. (struct auto_load_pspace_info): Add forward decl. (struct extension_language_defn): Add forward decl. (maybe_add_script): Delete. (auto_load_objfile_script): Declare. (script_not_found_warning_print): Delete. (auto_load_info_scripts): Update prototype. (auto_load_gdb_scripts_enabled): Declare. * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from auto_load_python_scripts_enabled and made public. (script_language_python): Delete, moved to python.c. (gdbpy_script_language_defn): Delete. (info_auto_load_python_scripts): Update to use extension_language_python. * breakpoint.c (condition_command): Replace call to gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang. (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop with call to breakpoint_ext_lang_cond_says_stop. * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed from gdbpy_should_stop. Change result type to enum scr_bp_stop. New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL. (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond. New arg slang. (local_setattro): Print name of extension language with existing stop condition. * valprint.c (val_print, value_print): Update to call apply_ext_lang_val_pretty_printer. * cp-valprint.c (cp_print_value): Update call to apply_ext_lang_val_pretty_printer. * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON. (gdbpy_apply_val_pretty_printer): Renamed from apply_val_pretty_printer. New arg extlang. (!HAVE_PYTHON, apply_val_pretty_printer): Delete. * cli/cli-cmds.c (source_script_from_stream): Rewrite to use extension language API. * cli/cli-script.c (execute_control_command): Update to call eval_ext_lang_from_control_command. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use enum ext_lang_bt_status values. Update call to apply_ext_lang_frame_filter. (mi_cmd_stack_list_locals): Ditto. (mi_cmd_stack_list_args): Ditto. (mi_cmd_stack_list_variables): Ditto. * mi/mi-main.c: Delete #include "python/python-internal.h". Add #include "extension.h". (mi_cmd_list_features): Replace reference to python internal variable gdb_python_initialized with call to ext_lang_initialized_p. * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status. Update to use enum ext_lang_frame_args. Update to call apply_ext_lang_frame_filter. * python/py-framefilter.c (extract_sym): Update to use enum ext_lang_bt_status. (extract_value, py_print_type, py_print_value): Ditto. (py_print_single_arg, enumerate_args, enumerate_locals): Ditto. (py_mi_print_variables, py_print_locals, py_print_args): Ditto. (py_print_frame): Ditto. (gdbpy_apply_frame_filter): Renamed from apply_frame_filter. New arg extlang. Update to use enum ext_lang_bt_status. * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to finish_python_initialization. Replace with call to finish_ext_lang_initialization. * typeprint.c (do_free_global_table): Update to call free_ext_lang_type_printers. (create_global_typedef_table): Update to call start_ext_lang_type_printers. (find_global_typedef): Update to call apply_ext_lang_type_printers. * typeprint.h (struct ext_lang_type_printers): Add forward decl. (type_print_options): Change type of global_printers from "void *" to "struct ext_lang_type_printers *". * value.c (preserve_values): Update to call preserve_ext_lang_values. * python/py-value.c: Remove #ifdef HAVE_PYTHON. (gdbpy_preserve_values): Renamed from preserve_python_values. New arg extlang. (!HAVE_PYTHON, preserve_python_values): Delete. * utils.c (quit_flag): Delete, moved to extension.c. (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to extension.c. * eval.c: Delete #include "python/python.h". * main.c: Delete #include "python/python.h". * defs.h: Update comment. testsuite/ * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected output. * gdb.gdb/python-interrupts.exp: New file.
2014-01-21gdb: Support install-strip targetRoland McGrath1-15/+16
gdb/ * configure.ac: Call AM_PROG_INSTALL_STRIP. * configure: Regenerate. * aclocal.m4: Regenerate. * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP): New substituted variables. (install-strip): New target. (INSTALL_SCRIPT): New substituted variable. (FLAGS_TO_PASS): Add it. (install-only): Use $(INSTALL_SCRIPT) rather than $(INSTALL_PROGRAM) for gcore.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-11-28 * configure.ac: Add comments delineating libpython and libmcheck.Doug Evans1-0/+8
* configure: Regenerate.
2013-11-27gdb: fix cygwin check in configure scriptSteffen Sledz1-1/+1
Avoid false positives if the search pattern "lose" is found in path descriptions in comments generated by the preprocessor. See <https://sourceware.org/bugzilla/show_bug.cgi?id=16152>. gdb/ 2013-11-27 Steffen Sledz <sledz@dresearch-fe.de> * configure.ac: Tighten Cygwin detection check. * configure: Rebuild.
2013-11-18sys/types.h cleanupTom Tromey1-3/+1
configure doesn't check for sys/types.h any more, but it still tries to use the result of the check. This removes that use as well. 2013-11-18 Tom Tromey <tromey@redhat.com> * configure: Rebuild. * configure.ac: Remove check of HAVE_SYS_TYPES_H.
2013-11-18don't check for unistd.hTom Tromey1-1/+1
We don't use the result of checking for unistd.h, so this removes the check. 2013-11-18 Tom Tromey <tromey@redhat.com> * configure: Rebuild. * configure.ac: Don't check for unistd.h.
2013-11-18stdlib.h is universal tooTom Tromey1-1/+1
stdlib.h is universal as well, so there is no need to check for it. 2013-11-18 Tom Tromey <tromey@redhat.com> * configure: Rebuild. * configure.ac: Don't check for stdlib.h * defs.h: Include stdlib.h unconditionally. 2013-11-18 Tom Tromey <tromey@redhat.com> * configure: Rebuild. * configure.ac: Don't check for stdlib.h. * gdbreplay.c: Unconditionally include stdlib.h.
2013-11-18don't check for stddef.hTom Tromey1-1/+1
gdb already unconditionally includes stddef.h in many places. I think there is no reason to check for its existence. Also, Zack Weinberg's header file survey agrees: http://hacks.owlfolio.org/header-survey/ This patch removes the configure check and the inclusion guards. It also removes a redundant inclusion that I noticed in defs.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't check for stddef.h. * defs.h: Unconditionally include stddef.h. Remove duplicate inclusion.
2013-11-18remove gdb_dirent.hTom Tromey1-1/+0
This removes gdb_dirent.h and updates the code to use dirent.h instead. It also removes the now-useless configure checks. 2013-11-18 Tom Tromey <tromey@redhat.com> * common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT. * common/gdb_dirent.h: Remove. * common/filestuff.c: Use dirent.h. * common/linux-osdata.c: Use dirent.h. (NAMELEN): Define. * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT. * linux-fork.c: Use dirent.h * linux-nat.c: Use dirent.h. * nto-procfs.c: Use dirent.h. * procfs.c: Use dirent.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT.
2013-11-11fix "tkill" checkTom Tromey1-2/+4
An earlier patch removed the check for "syscall" since the results were not used in the C code. However, the result was used, via the cache variable, elsewhere in configure. This patch fixes the problem by checking for "syscall" at the point at which HAVE_TKILL_SYSCALL is defined. 2013-11-11 Tom Tromey <tromey@redhat.com> * config.in, configure: Rebuild. * configure.ac (HAVE_TKILL_SYSCALL): Check for "syscall".
2013-11-08fix a comment in configure.acTom Tromey1-4/+2
My grepping around showed that HAVE_MULTIPLE_PROC_FDS is only ever mentioned in a comment in configure.ac. Since the macro is long dead, let's remove the last mention. 2013-11-08 Tom Tromey <tromey@redhat.com> * configure: Rebuild. * configure.ac: Remove mentions of HAVE_MULTIPLE_PROC_FDS.
2013-11-08gdb configure updatesTom Tromey1-31/+9
Now that the configury needed for the "common" and "target" directories is in common.m4, some code in gdb's configure.ac is redundant. I ran this script after making an "ID" file using mkid: sed -n 's/^.*\(HAVE_[A-Z0-9_]*\).*$/\1/p' config.in | while read x; do echo ===== $x gid $x | egrep -v '^(testsuite|gnulib|common|target|gdbserver)/' done This finds all the spots using HAVE_ defines, and, more importantly, makes it clear which defines aren't used in the main parts of gdb. From this I came up with this patch to remove all the unused bits. There are a few that are subtly used -- for example the configure script sometimes checks internal configure cache variables, meaning some checks cannot be removed. 2013-11-08 Tom Tromey <tromey@redhat.com> * configure, config.in: Rebuild. * configure.ac: Remove unused configury.
2013-11-08remove link.h checksTom Tromey1-83/+0
The removal of solib-sunos.c also removed the last user of various macros defined by configure. This patch removes the corresponding configure code. 2013-11-08 Tom Tromey <tromey@redhat.com> * configure, config.in: Rebuild. * configure.ac: Remove all link.h-related checks.
2013-11-08introduce common.m4Tom Tromey1-0/+1
It has bothered me for a while that files in common/ use macros defined via autoconf checks, but rely on each configure.ac doing the proper checks independently. This patch introduces common/common.m4 which consolidates the checks assumed by code in common. The rule I propose is that if something is needed or used by common, it should be checked for by common.m4. However, if the check is also needed by gdb or gdbserver, then it should be duplicated there. Built and regtested on x86-64 Fedora 18 (though this is hardly the most strenuous case) and using the Fedora 18 mingw cross compilers. I also examined the config.in diffs to ensure that symbols did not go missing. 2013-11-08 Tom Tromey <tromey@redhat.com> * acinclude.m4: Include common.m4. * common/common.m4: New file. * configure, config.in: Rebuild. * configure.ac: Use GDB_AC_COMMON. 2013-11-08 Tom Tromey <tromey@redhat.com> * acinclude.m4: Include common.m4, codeset.m4. * configure, config.in: Rebuild. * configure.ac: Use GDB_AC_COMMON.
2013-09-16 * README: Update references to writing code for GDB.Stan Shebs1-5/+0
* configure.ac (build_warnings): Remove obsolete comment. * configure: Regenerate. * gdbarch.sh: Remove references to gdbint.texinfo. * gdbarch.h: Regenerate. * gdbtypes.c (objfile_type): Remove comments referencing internals manual and D10V. [gdb/doc] Remove the internals manual gdbint.texinfo. * Makefile.in (INFO_DEPS): Remove gdbint.info. (PDFFILES): Remove gdbint.pdf. (HTMLFILES): Remove gdbint/index.html. (HTMLFILES_INSTALL): Remove gdbint. (GDBINT_DOC_FILES): Remove. (dvi): Remove gdbint.dvi. (ps): Remove gdbint.ps. * gdbint.texinfo: Remove file. * gdb.texinfo (Maintenance Commands): Remove reference to gdbint.
2013-09-02gdb/Yao Qi1-1/+1
* config/djgpp/fnchange.lst: Remove entry of i386-interix-nat.c and i386-interix-tdep.c. * configure.ac: Remove '*-*-interix*'. * configure: Re-generated. * defs.h (enum gdb_osabi): Remove GDB_OSABI_INTERIX. * i386-cygwin-tdep.c (i386_cygwin_osabi_sniffer): Remove obsolete comments. * osabi.c (gdb_osabi_names): Remove "Interix".
2013-08-22 Unify ptrace options discovery code and make both GDB andLuis Machado1-1/+3
gdbserver use it. gdb/ * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-nat.h and nat/linux-waitpid.h. (linux-waitpid.o): New object file rule. * common/linux-ptrace.c: Include nat/linux-waitpid.h. (current_ptrace_options): Moved from linux-nat.c. (linux_ptrace_test_ret_to_nx): Use type casts for ptrace parameters. (linux_fork_to_function): New function. (linux_grandchild_function): Likewise. (linux_child_function): Likewise. (linux_check_ptrace_features): New function, heavily based on linux-nat.c:linux_test_for_tracefork. (linux_enable_event_reporting): New function. (ptrace_supports_feature): Likewise. (linux_supports_tracefork): Likewise. (linux_supports_traceclone): Likewise. (linux_supports_tracevforkdone): Likewise. (linux_supports_tracesysgood): Likewise. * common/linux-ptrace.h (HAS_NOMMU): Moved from gdbserver/linux-low.c. (linux_enable_event_reporting): New declaration. (linux_supports_tracefork): Likewise. (linux_supports_traceclone): Likewise. (linux_supports_tracevforkdone): Likewise. (linux_supports_tracesysgood): Likewise. * config.in (PTRACE_TYPE_ARG4): Regenerate. * config/aarch64/linux.mh (NATDEPFILES): Add linux-waitpid.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise.. * config/powerpc/linux.mh (NATDEPFILES): Likewise.. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. * configure.ac (AC_CACHE_CHECK): Add void * to the list of ptrace's 4th argument's types. Check the type of PTRACE_TYPE_ARG4. * configure: Regenerate. * linux-nat.c: Include nat/linux-nat.h and nat/linux-waitpid.h. (SYSCALL_SIGTRAP): Moved to nat/linux-nat.h. (linux_supports_tracefork_flag): Remove. (linux_supports_tracesysgood_flag): Likewise. (linux_supports_tracevforkdone_flag): Likewise. (current_ptrace_options): Moved to common/linux-ptrace.c. (linux_tracefork_child): Remove. (my_waitpid): Remove. (linux_test_for_tracefork): Renamed to linux_check_ptrace_features and moved to common/linux-ptrace.c. (linux_test_for_tracesysgood): Remove. (linux_supports_tracesysgood): Remove. (linux_supports_tracefork): Remove. (linux_supports_tracevforkdone): Remove. (linux_enable_tracesysgood): Remove. (linux_enable_event_reporting): Remove. (linux_init_ptrace): New function. (linux_child_post_attach): Call linux_init_ptrace. (linux_child_post_startup_inferior): Call linux_init_ptrace. (linux_child_follow_fork): Call linux_supports_tracefork and linux_supports_tracevforkdone. (linux_child_insert_fork_catchpoint): Call linux_supports_tracefork. (linux_child_insert_vfork_catchpoint): Likewise. (linux_child_set_syscall_catchpoint): Call linux_supports_tracesysgood. (lin_lwp_attach_lwp): Call linux_supports_tracefork. * nat/linux-nat.h: New file. * nat/linux-waitpid.c: New file. * nat/linux-waitpid.h: New file. gdb/gdbserver/ * Makefile.in: Explain why ../target and ../nat are not listed as include file search paths. (linux-waitpid.o): New object file rule. * configure.srv (srv_native_linux_obj): New variable. Replace all occurrences of linux native object files with $srv_native_linux_obj. * linux-low.c: Include nat/linux-nat.h and nat/linux-waitpid.h. (HAS_NOMMU): Move defining logic to common/linux-ptrace.c. (linux_enable_event_reporting): Remove declaration. (my_waitpid): Moved to common/linux-waitpid.c. (linux_wait_for_event): Pass ptid when calling linux_enable_event_reporting. (linux_supports_tracefork_flag): Remove. (linux_enable_event_reporting): Likewise. (linux_tracefork_grandchild): Remove. (STACK_SIZE): Moved to common/linux-ptrace.c. (linux_tracefork_child): Remove. (linux_test_for_tracefork): Remove. (linux_look_up_symbols): Call linux_supports_traceclone. (initialize_low): Remove call to linux_test_for_tracefork. * linux-low.h (PTRACE_TYPE_ARG3): Move to common/linux-ptrace.h. (PTRACE_TYPE_ARG4): Likewise. Include linux-ptrace.h.
2013-08-072013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>Ulrich Weigand1-1/+1
Ulrich Weigand <uweigand@de.ibm.com> * gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64 is defined. * rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb. (rs6000_ptrace32): Call ptrace64 instead of ptrace if present. (rs6000_ptrace64): Call ptace64 instead of ptracex if present. * configure.ac: Check for ptrace64. * configure, config.in: Regenerate.
2013-07-03On mainline/development, also link GDBserver with -lmcheck.Pedro Alves1-26/+12
This factors --enable-libmcheck related bits from GDB's configure.ac and makes GDBserver use them too. Specifically, the 'development' global is moved to a separate script to it can be sourced by both GDB and GDBserver, and the --enable-libmcheck/--disable-libmcheck bits proper are moved to a new m4 file. I started out by defining 'development' in the m4 file, but in the end decided against it, as a separate script has the advantage that changing it in release branches does not require regenerating configure, unlike today. I had also started out by making the new GDB_AC_LIBMCHECK itself handle the yes/no default fallback depending on release/developement, but since I had split out 'development' to a separate script, and, GDB needs the python checks anyway (hence we'd need to do the python checks in gdb's configure.ac, and pass in a 'default lmcheck yes/no' parameter to GDB_AC_LIBMCHECK anyway), I ended up keeping GDB_AC_LIBMCHECK isolated from the 'development' global. IOW, it's the caller's business to handle it. Tested on x86_64 Fedora 17. Built GDB and GDBserver with and without --enable-libmcheck, and observed --enable-libmcheck overrides the disablement of -lmcheck caused by python supporting threads, and that GDBserver links with -lmcheck when expected. Also observed that changing the 'development' global, and issuing "make" triggers a relink, and '-lmcheck' is included or not from the link accordingly. gdb/ 2013-07-03 Pedro Alves <palves@redhat.com> * Makefile.in (config.status): Depend on development.sh. (aclocal_m4_deps): Add libmcheck.m4. * acinclude.m4: Include libmcheck.m4. * configure.ac: Source development.sh instead of setting 'development' here. --enable-libmcheck/--disable-libmcheck code factored out to GDB_AC_LIBMCHECK. Run it. * development.sh: New file. * libmcheck.m4: New file. * configure: Regenerate. gdb/gdbserver/ 2013-07-03 Pedro Alves <palves@redhat.com> * Makefile.in (config.status): Depend on development.sh. * acinclude.m4: Include libmcheck.m4. * configure: Regenerate.
2013-07-01add -Wold-style-definitionTom Tromey1-1/+1
This adds -Wold-style-definition to gdb's list of warnings. This found a couple of spots where "()" was used where "(void)" is more correct. Tested by rebuilding on x86-64 Fedora 18. * configure.ac (build_warnings): Add -Wold-style-definition. * configure: Rebuild. * machoread.c (_initialize_machoread): Use "(void)". * macrocmd.c (macro_inform_no_debuginfo): Fix formatting; use "(void)".
2013-07-01add -Wold-style-declarationTom Tromey1-1/+2
This adds -Wold-style-declaration to gdb's list of warnings. It turns out that a few places use "const static" rather than "static const". The former is deprecated according to the C standard. Tested by rebuilding with --enable-targets=all on x86-64 Fedora 18. * configure.ac (build_warnings): Add -Wold-style-declaration. * configure: Rebuild. * dsrec.c (make_srec): Use "static const", not "const static". * h8300-tdep.c (h8300_breakpoint_from_pc): Use "static const", not "const static". * mi/mi-parse.c (mi_no_values, mi_simple_values, mi_all_values): Use "static const", not "const static". * mn10300-tdep.c (mn10300_breakpoint_from_pc): Use "static const", not "const static". * moxie-tdep.c (moxie_breakpoint_from_pc): Use "static const", not "const static". * rs6000-tdep.c (rs6000_breakpoint_from_pc): Use "static const", not "const static". * v850-tdep.c (v850_breakpoint_from_pc): Use "static const", not "const static". (v850_dbtrap_breakpoint_from_pc): Likewise. * xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Use "static const", not "const static".
2013-07-01add -Wmissing-parameter-typeTom Tromey1-1/+1
This adds -Wmissing-parameter-type to gdb's list of warnings. This one doesn't happen to trigger for a --enable-targets=all build on x86-64 Fedora 18. * configure.ac (build_warnings): Add -Wmissing-parameter-type. * configure: Rebuild.
2013-07-01Reimplement DJGPP's .gdbinit -> gdb.ini renaming.Pedro Alves1-0/+11
This simplifies the .gdbinit filename selection logic. We have a GDBINIT_FILENAME define that supposedly configurations would override, but none do so. Instead, the only configuration that wants a different file name instead of ".gdbinit", djgpp, does a strcpy over the gdbinit global array. This means the array needs to be sized, and the code that does that is doing the usual 'PATH_MAX/FILENAME_MAX/fallback constant/etc.' mess. Instead of all that, it's much simpler to have configure specificy the .gdbinit filename. As bonus, we can then make the "gdbinit" global array const. gdb/ 2013-07-01 Pedro Alves <palves@redhat.com> * configure.ac (GDBINIT): Define, depending on host. * go32-nat.c (init_go32_ops): Don't override gdbinit here. * top.c (PATH_MAX): Delete fallback definition. (GDBINIT_FILENAME): Delete. (gdbinit): Reimplement as const char array set to the GDBINIT string constant. * top.h (gdbinit): Make const.
2013-05-23common/filestuff.c: No sockets on DJGPP.Pedro Alves1-1/+1
Building gdb with --host=i586-pc-msdosdjgpp ends up with: i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c ../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory There are no sockets on djgpp. This #ifdef's out the bits in the file that use sockets, depending on whether winsock or sys/socket.h is available. As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split into separate files, and which to use is selected by configure.ac: dnl Figure out which of the many generic ser-*.c files the _host_ supports. SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o" case ${host} in *go32* ) SER_HARDWIRE=ser-go32.o ;; *djgpp* ) SER_HARDWIRE=ser-go32.o ;; *mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;; esac AC_SUBST(SER_HARDWIRE) ... I considered splitting filestuff.c similarly. But I quickly gave up on the idea, as it looked like a lot more complication over this approach, for no real gain. Plus, there are uses of these functions outside the ser*.c framework. gdbserver's configure.ac is already checking for sys/socket.h. gdb/ 2013-05-23 Pedro Alves <palves@redhat.com> * common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS. [HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS. (socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec): Only define if HAVE_SOCKETS is defined. * configure.ac: Check for sys/socket.h. * config.in, configure: Regenerate.
2013-05-17Replace hardcoded -ldl with check for availabilityH.J. Lu1-1/+1
2013-05-17 Pavel Chupin <pavel.v.chupin@intel.com> * acinclude.m4: Add check for dlopen in libdl. * configure.ac: Ditto. * configure: Regenerate.
2013-05-16gdb/Thomas Schwinge1-2/+9
2013-05-16 Yue Lu <hacklu.newborn@gmail.com> * configure.ac: Ensure MIG is available when building for GNU Hurd hosts. * configure: Regenerate.
2013-05-10gdbTom Tromey1-1/+2
Freddie Chopin <freddie_chopin@op.pl> PR build/15414: * configure: Rebuild. * configure.ac (build_warnings): Do not use -Wformat-nonliteral with -Wno-format. sim/common * acinclude.m4 (SIM_AC_OPTION_WARNINGS): Do not use -Wformat-nonliteral with -Wno-format. sim/bfin * configure: Rebuild. sim/cr16 * configure: Rebuild. sim/cris * configure: Rebuild. sim/d10v * configure: Rebuild. sim/igen * configure: Rebuild. sim/m68hc11 * configure: Rebuild. sim/mips * configure: Rebuild. sim/mn10300 * configure: Rebuild. sim/v850 * configure: Rebuild.
2013-05-10move sparc-sol-thread.c back into sol-thread.c.Joel Brobecker1-7/+0
The routines in sparc-sol-thread used to be SPARC-specific (and documented as such in the ptrace man page), and therefore hosting them in a sparc-specific file made sense. However, newer versions of Solaris now use those callbacks (Solaris 10 Update 10, apparently), and thus the note about these callbacks being specific to SPARC was removed. So this patch deletes sparc-sol-thread.c and moves the code back inside sol-thread.c. gdb/ChangeLog: PR tdep/15420: * sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs): New functions, directly copied from sparc-sol-thread.c. * sparc-sol-thread.c: Delete. * configure.ac: Remove code handling sparc-solaris-thread.c. * configure: Regenerate.
2013-04-22 PR gdb/7912:Tom Tromey1-2/+3
* Makefile.in (SFILES): Add filestuff.c (COMMON_OBS): Add filestuff.o. (filestuff.o): New target. * auto-load.c (auto_load_objfile_script_1): Use gdb_fopen_cloexec. * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec. * cli/cli-cmds.c (shell_escape): Call close_most_fds. * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec. * common/agent.c (gdb_connect_sync_socket): Use gdb_socket_cloexec. * common/filestuff.c: New file. * common/filestuff.h: New file. * common/linux-osdata.c (linux_common_core_of_thread) (command_from_pid, commandline_from_pid, print_source_lines) (linux_xfer_osdata_shm, linux_xfer_osdata_sem) (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use gdb_fopen_cloexec. * common/linux-procfs.c (linux_proc_get_int) (linux_proc_pid_has_state): Use gdb_fopen_cloexec. * config.in, configure: Rebuild. * configure.ac: Don't check for sys/socket.h. Check for fdwalk, pipe2. * corelow.c (core_open): Use gdb_open_cloexec. * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec. * fork-child.c (fork_inferior): Call close_most_fds. * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec. * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec. * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals): Use gdb_fopen_cloexec. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use gdb_open_cloexec. (linux_async_pipe): Use gdb_pipe_cloexec. * remote-fileio.c (remote_fileio_func_open): Use gdb_open_cloexec. * remote.c (remote_file_put, remote_file_get): Use gdb_fopen_cloexec. * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec, close_most_fds. * ser-tcp.c (net_open): Use gdb_socket_cloexec. * ser-unix.c (hardwire_open): Use gdb_open_cloexec. * solib.c (solib_find): Use gdb_open_cloexec. * source.c (openp, find_and_open_source): Use gdb_open_cloexec. * tracepoint.c (tfile_start): Use gdb_fopen_cloexec. (tfile_open): Use gdb_open_cloexec. * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec. * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec. * xml-support.c (xml_fetch_content_from_file): Use gdb_fopen_cloexec. * main.c (captured_main): Call notice_open_fds. gdbserver * Makefile.in (SFILES): Add filestuff.c. (OBS): Add filestuff.o. (filestuff.o): New target. * config.in, configure: Rebuild. * configure.ac: Check for fdwalk, pipe2.
2013-04-19Enable -Wpointer-sign by default.Pedro Alves1-1/+1
This enables -Wpointer-sign by default. I've checked that --enable-targets=all builds fine with the following as --host, on x86_64 Fedora 17 --build: x86_64 GNU/Linux i386 GNU/Linux i386 MinGW-w64 i386 msdos/djgpp OK? gdb/ 2013-04-19 Pedro Alves <palves@redhat.com> * configure.ac (build_warnings): Replace -Wno-pointer-sign with -Wpointer-sign. * configure: Regenerate. gdb/doc 2013-04-19 Pedro Alves <palves@redhat.com> * gdbint.texinfo (Misc Guidelines) <Compiler Warnings>: Replace -Wno-pointer-sign text with text on -Wpointer-sign.
2013-04-11gdb/Jan Kratochvil1-0/+22
* Makefile.in (HAVE_NATIVE_GCORE_TARGET): New. (generated_files): Add gcore. (install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or HAVE_NATIVE_GCORE_HOST. (gcore): New. * NEWS (Changes since GDB 7.6): Mention newly installed gcore. * config/alpha/alpha-osf3.mh, config/i386/fbsd.mh, config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh, config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh, config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh: Add HAVE_NATIVE_GCORE_HOST. * configure: Regenerate. * configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it. New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME. New AC_CONFIG_FILES for gcore. * configure.tgt: Add gdb_have_gcore to the initial comment. Set gdb_have_gcore. * gdb_gcore.sh: Rename to ... * gcore.in: ... here. Remove gcore.sh comment. Use GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME substitutions. gdb/doc/ * Makefile.in (MAN1S): Add gcore.1. Remove "Host, target, and site specific Makefile fragments" comment. (@host_makefile_frag@, HAVE_NATIVE_GCORE_TARGET): New. (install-man1, uninstall-man1): Conditionalize gcore.1. (gcore.1): New. * gdb.texinfo (Man Pages): Add gcore man. (gcore man): New node.
2013-04-10gdb/Yao Qi1-0/+41
2013-04-10 Hui Zhu <hui@codesourcery.com> Yao Qi <yao@codesourcery.com> * configure.ac: Check libbabeltrace is installed. * config.in: Regenerate. * configure: Regenerate. * Makefile.in (LIBBABELTRACE): New. (CLIBS): Add LIBBABELTRACE. * ctf.c: Include "exec.h". (CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros. (CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros. (ctf_save_metadata_header): Define new type aliases in metadata. (ctf_write_header): Define event type "tsv_def" and "tp_def" in metadata. Start a new faked packet for trace status. (ctf_write_status): Write trace status to CTF. (ctf_write_uploaded_tsv): Write TSV to CTF. (ctf_write_uploaded_tp): Write tracepoint definition to CTF. (ctf_write_definition_end): End the faked packet. (ctx, ctf_iter, trace_dirname): New. (start_pos): New variable. (ctf_destroy, ctf_open_dir, ctf_open): New. (SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New macros. (ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New. (ctf_fetch_registers, ctf_xfer_partial): New. (ctf_get_trace_state_variable_value): New. (ctf_get_tpnum_from_frame_event): New. (ctf_get_traceframe_address): New. (ctf_trace_find, ctf_has_stack): New. (ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New. (ctf_get_trace_status, ctf_read_status): New. (_initialize_ctf): New. * tracepoint.c (get_tracepoint_number): New (get_uploaded_tsv): Remove 'static'. (struct traceframe_info, trace_regblock_size): Move it to ... * tracepoint.h: ... here. (get_tracepoint_number): Declare it. (get_uploaded_tsv): Declare it. * NEWS: Mention new configure option. gdb/doc/ 2013-04-10 Yao Qi <yao@codesourcery.com> * gdb.texinfo (Trace Files): Add "target ctf". gdb/testsuite/ 2013-04-10 Yao Qi <yao@codesourcery.com> * gdb.trace/actions.exp: Save trace data to CTF. Change to ctf target if GDB supports, read CTF data in ctf target, and check the actions of tracepoints. * gdb.trace/while-stepping.exp: Likewise. * gdb.trace/report.exp: Test GDB saves trace data to CTF format and read CTF trace file if GDB supports. * gdb.trace/tstatus.exp: Save trace data to CTF. If ctf target is supported, change to ctf target, read trace data and check output of command "tstatus". * gdb.trace/tsv.exp: Save trace frame to CTF. If GDB supports, read CTF data by target ctf and call check_tsv.
2013-03-11gdb/Jan Kratochvil1-0/+3
* configure: Regenerate. * configure.ac (check dynamic export flag): Link python test with $PYTHON_LIBS.
generated by cgit v1.1 at 2024-12-13 21:01:41 +0000