| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
|
|
This does most of the mechanical removal. IOW, the easy part.
This doesn't touch procfs.c as that'd be a harder excision,
potentially affecting Solaris.
mips-tdep.c is left alone. E.g., I didn't delete the GDB_OSABI_IRIX
enum value, nor references to it in mips-tdep.c. Some comments
mentioning IRIX ABIs may still be relevant and I wouldn't know what to
do with them. in That can always be done on a separate pass,
preferably by someone who can test on MIPS.
I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration mips-sgi-irix6 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix'
make: *** [all] Error 2
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o.
(ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c.
(HFILES_NO_SRCDIR): Remove solib-irix.h.
* NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6*
and been removed.
* config/mips/irix5.mh, config/mips/irix6.mh: Delete files.
* configure.ac: Remove references to IRIX.
* configure.host: Add *-*-irix* to the obsolete hosts section.
Remove all other references to irix.
* irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h:
Delete files.
gdb/testsuite/
2014-10-10 Pedro Alves <palves@redhat.com>
* gdb.base/bigcore.exp: Remove references to IRIX.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/mips_pro.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
|
|
gdb/
* config/i386/i386gnu.mh (NATDEPFILES): Add x86-nat.o and
x86-dregs.o.
* gnu-nat.c (inf_threads): New function.
* gnu-nat.h (inf_threads_ftype): New typedef.
(inf_threads): New declaration.
* i386gnu-nat.c: Include "x86-nat.h" and "inf-child.h".
[i386_DEBUG_STATE] (i386_gnu_dr_get, i386_gnu_dr_set)
(i386_gnu_dr_set_control_one, i386_gnu_dr_set_control)
(i386_gnu_dr_set_addr_one, i386_gnu_dr_set_addr)
(i386_gnu_dr_get_reg, i386_gnu_dr_get_addr, 386_gnu_dr_get_status)
(i386_gnu_dr_get_control): New functions.
(reg_addr): New structure.
(_initialize_i386gnu_nat) [i386_DEBUG_STATE]: Initialize hardware
i386 debugging register hooks.
* NEWS: Mention this.
|
|
This commit renames nine files that contain code used by both 32- and
64-bit Intel ports such that their names are prefixed with "x86"
rather than "i386". All types, functions and variables within these
files are likewise renamed such that their names are prefixed with
"x86" rather than "i386". This makes GDB follow the convention used
by gdbserver such that 32-bit Intel code lives in files called
"i386-*", 64-bit Intel code lives in files called "amd64-*", and code
for both 32- and 64-bit Intel lives in files called "x86-*".
This commit only renames OS-independent files. The Linux ports of
both GDB and gdbserver now follow the i386/amd64/x86 convention fully.
Some ports still use the old convention where "i386" in file/function/
type/variable names can mean "32-bit only" or "32- and 64-bit" but I
don't want to touch ports I can't fully test except where absolutely
necessary.
gdb/ChangeLog:
* i386-nat.h: Renamed as...
* x86-nat.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-nat.c: Renamed as...
* x86-nat.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* common/i386-xstate.h: Renamed as...
* common/x86-xstate.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-cpuid.h: Renamed as...
* nat/x86-cpuid.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-gcc-cpuid.h: Renamed as...
* nat/x86-gcc-cpuid.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-dregs.h: Renamed as...
* nat/x86-dregs.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-dregs.c: Renamed as...
* nat/x86-dregs.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
gdb/gdbserver/ChangeLog:
* i386-low.h: Renamed as...
* x86-low.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-low.c: Renamed as...
* x86-low.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
|
|
This commit moves the duplicated code in {i386,amd64}-linux-nat.c
into the new files x86-linux-nat.[ch]. Additionally, a new
file i386-linux-nat.h was required to expose a value required
by the 32-bit code in x86-linux-nat.c.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* i386-linux-nat.h: New file.
* x86-linux-nat.h: Likewise.
* x86-linux-nat.c: Likewise.
* Makefile.in (HFILES_NO_SRCDIR): Add the above new headers.
* config/i386/linux.mh (NATDEPFILES): Add x86-linux-nat.o.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* amd64-linux-nat.c (x86-linux-nat.h): New include.
(PTRACE_GETREGSET): Now in x86-linux-nat.h.
(PTRACE_SETREGSET): Likewise.
(arch_lwp_info): Now in x86-linux-nat.c.
(have_ptrace_getregset): Now in x86-linux-nat.h.
(x86_linux_dr_get): Now in x86-linux-nat.c.
(x86_linux_dr_set): Likewise.
(x86_linux_dr_get_addr): Likewise.
(x86_linux_dr_get_control): Likewise.
(x86_linux_dr_get_status): Likewise.
(update_debug_registers_callback): Likewise.
(x86_linux_dr_set_control): Likewise.
(x86_linux_dr_set_addr): Likewise.
(x86_linux_prepare_to_resume): Likewise.
(x86_linux_new_thread): Likewise.
(x86_linux_new_fork): Likewise.
(x86_linux_get_thread_area): Likewise.
(super_post_startup_inferior): Likewise.
(x86_linux_child_post_startup_inferior): Likewise.
(AMD64_LINUX_USER64_CS): Likewise.
(AMD64_LINUX_X32_DS): Likewise.
(x86_linux_read_description): Likewise.
(x86_linux_enable_btrace): Likewise.
(x86_linux_disable_btrace): Likewise.
(x86_linux_teardown_btrace): Likewise.
(x86_linux_read_btrace): Likewise.
(x86_linux_create_target): Likewise.
(x86_linux_add_target): Likewise.
* i386-linux-nat.c (x86-linux-nat.h): New include.
(PTRACE_GETREGSET): Now in x86-linux-nat.h.
(PTRACE_SETREGSET): Likewise.
(arch_lwp_info): Now in x86-linux-nat.c.
(have_ptrace_getregset): Now in x86-linux-nat.h.
(x86_linux_dr_get): Now in x86-linux-nat.c.
(x86_linux_dr_set): Likewise.
(x86_linux_dr_get_addr): Likewise.
(x86_linux_dr_get_control): Likewise.
(x86_linux_dr_get_status): Likewise.
(update_debug_registers_callback): Likewise.
(x86_linux_dr_set_control): Likewise.
(x86_linux_dr_set_addr): Likewise.
(x86_linux_prepare_to_resume): Likewise.
(x86_linux_new_thread): Likewise.
(x86_linux_new_fork): Likewise.
(x86_linux_get_thread_area): Likewise.
(super_post_startup_inferior): Likewise.
(x86_linux_child_post_startup_inferior): Likewise.
(AMD64_LINUX_USER64_CS): Likewise.
(AMD64_LINUX_X32_DS): Likewise.
(x86_linux_read_description): Likewise.
(x86_linux_enable_btrace): Likewise.
(x86_linux_disable_btrace): Likewise.
(x86_linux_teardown_btrace): Likewise.
(x86_linux_read_btrace): Likewise.
(x86_linux_create_target): Likewise.
(x86_linux_add_target): Likewise.
|
|
This commit moves code to be shared from i386-{nat,low}.[ch]
into a new file, nat/i386-dregs.c.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* nat/i386-dregs.c: New file.
* Makefile.in (i386-dregs.o): New rule.
* config/i386/cygwin.mh (NATDEPFILES): Add i386-dregs.o.
* config/i386/cygwin64.mh (NATDEPFILES): Likewise.
* config/i386/darwin.mh (NATDEPFILES): Likewise.
* config/i386/fbsd.mh (NATDEPFILES): Likewise.
* config/i386/fbsd64.mh (NATDEPFILES): Likewise.
* config/i386/go32.mh (NATDEPFILES): Likewise.
* config/i386/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* config/i386/mingw.mh (NATDEPFILES): Likewise.
* config/i386/mingw64.mh (NATDEPFILES): Likewise.
* i386-nat.h (debug_hw_points): New declaration.
* i386-nat.c (breakpoint.h): Remove include.
(command.h): Likewise.
(target.h): Likewise.
(gdb_assert.h): Likewise.
(debug_hw_points): Made nonstatic.
(debug_printf): Now in i386-dregs.c.
(TARGET_HAS_DR_LEN_8): Likewise.
(DR_CONTROL_SHIFT): Likewise.
(DR_CONTROL_SIZE): Likewise.
(DR_RW_EXECUTE): Likewise.
(DR_RW_WRITE): Likewise.
(DR_RW_READ): Likewise.
(DR_RW_IORW): Likewise.
(DR_LEN_1): Likewise.
(DR_LEN_2): Likewise.
(DR_LEN_4): Likewise.
(DR_LEN_8): Likewise.
(DR_LOCAL_ENABLE_SHIFT): Likewise.
(DR_GLOBAL_ENABLE_SHIFT): Likewise.
(DR_ENABLE_SIZE): Likewise.
(DR_LOCAL_SLOWDOWN): Likewise.
(DR_GLOBAL_SLOWDOWN): Likewise.
(DR_CONTROL_RESERVED): Likewise.
(I386_DR_CONTROL_MASK): Likewise.
(I386_DR_VACANT): Likewise.
(I386_DR_LOCAL_ENABLE): Likewise.
(I386_DR_GLOBAL_ENABLE): Likewise.
(I386_DR_DISABLE): Likewise.
(I386_DR_SET_RW_LEN): Likewise.
(I386_DR_GET_RW_LEN): Likewise.
(I386_DR_WATCH_HIT): Likewise.
(i386_wp_op_t): Likewise.
(i386_show_dr): Likewise.
(i386_length_and_rw_bits): Likewise.
(i386_insert_aligned_watchpoint): Likewise.
(i386_remove_aligned_watchpoint): Likewise.
(i386_handle_nonaligned_watchpoint): Likewise.
(i386_update_inferior_debug_regs): Likewise.
(i386_insert_watchpoint): Use i386_dr_insert_watchpoint.
(i386_remove_watchpoint): Use i386_dr_remove_watchpoint.
(i386_region_ok_for_watchpoint):
Use i386_dr_region_ok_for_watchpoint.
(i386_stopped_data_address): Use i386_dr_stopped_data_address.
gdb/gdbserver/
2014-06-19 Gary Benson <gbenson@redhat.com>
* Makefile.in (i386-dregs.o): New rule.
* configure.srv: Add i386-dregs.o to all targets using i386-low.o.
* i386-low.c (target.h): Remove include.
(TARGET_HAS_DR_LEN_8): Now in i386-dregs.c.
(DR_CONTROL_SHIFT): Likewise.
(DR_CONTROL_SIZE): Likewise.
(DR_RW_EXECUTE): Likewise.
(DR_RW_WRITE): Likewise.
(DR_RW_READ): Likewise.
(DR_RW_IORW): Likewise.
(DR_LEN_1): Likewise.
(DR_LEN_2): Likewise.
(DR_LEN_4): Likewise.
(DR_LEN_8): Likewise.
(DR_LOCAL_ENABLE_SHIFT): Likewise.
(DR_GLOBAL_ENABLE_SHIFT): Likewise.
(DR_ENABLE_SIZE): Likewise.
(DR_LOCAL_SLOWDOWN): Likewise.
(DR_GLOBAL_SLOWDOWN): Likewise.
(DR_CONTROL_RESERVED): Likewise.
(I386_DR_CONTROL_MASK): Likewise.
(I386_DR_VACANT): Likewise.
(I386_DR_LOCAL_ENABLE): Likewise.
(I386_DR_GLOBAL_ENABLE): Likewise.
(I386_DR_DISABLE): Likewise.
(I386_DR_SET_RW_LEN): Likewise.
(I386_DR_GET_RW_LEN): Likewise.
(I386_DR_WATCH_HIT): Likewise.
(i386_wp_op_t): Likewise.
(i386_show_dr): Likewise.
(i386_length_and_rw_bits): Likewise.
(i386_insert_aligned_watchpoint): Likewise.
(i386_remove_aligned_watchpoint): Likewise.
(i386_handle_nonaligned_watchpoint): Likewise.
i386_update_inferior_debug_regs(): Likewise.
(i386_dr_insert_watchpoint): Likewise.
(i386_dr_remove_watchpoint): Likewise.
(i386_dr_region_ok_for_watchpoint): Likewise.
(i386_dr_stopped_data_address): Likewise.
(i386_dr_stopped_by_watchpoint): Likewise.
|
|
gdb/ChangeLog:
* ppcobsd-nat.c: Include "obsd-nat.h".
(_initialize_ppcobsd_nat): Call obsd_add_target instead of
add_target.
* config/powerpc/obsd.mh (NATDEPFILES): Add obsd-nat.o.
|
|
gdb/ChangeLog:
* i386obsd-nat.c: Include "obsd-nat.h".
(_initialize_i386obsd_nat): Call obsd_add_target instead of
add_target.
* config/i386/obsd.mh (NATDEPFILES): Add obsd-nat.o.
|
|
gdb/ChangeLog:
* mips64obsd-nat.c: Include "obsd-nath".
(_initialize_mips64obsd_nat): Call obsd_add_target instead of
add_target
* config/mips/obsd64.mh (NATDEPFILES): Add obsd-nat.o.
|
|
gdb/ChangeLog:
* amd64obsd-nat.c (_initialize_amd64obsd_nat): Call
obsd_add_target instead of add_target.
* config/i386/obsd64.mh (NATDEPFILES): Add obsd-nat.o.
|
|
gdb/ChangeLog:
* configure.host (sparc64-*-openbsd*): Set gdb_host to obsd64.
* config/sparc/obsd64.mh: New file.
* sparc64obsd-nat.c: New file.
|
|
|
|
|
|
As suggested before, rename the S/390-related source files (tdep and nat)
such that "-linux-" occurs in the file name, like with other GNU/Linux
targets. Since no other operating system is currently supported by GDB
on this architecture, this isn't strictly necessary. But the old names
sometimes caused GDB contributors to miss these files when performing a
change that affects all GNU/Linux targets. The latest such incident was
observed here:
https://sourceware.org/ml/gdb-patches/2013-09/msg00619.html
gdb/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-tdep.h: Rename to...
* s390-linux-tdep.h: ...here.
* s390-tdep.c: Rename to...
* s390-linux-tdep.c: ...here. Adjust #include.
* s390-nat.c: Rename to...
* s390-linux-nat.c: ...here. Adjust #include.
* config/s390/s390.mh: Rename to...
* config/s390/linux.mh: ...here. Reflect rename s390-nat.o ->
s390-linux-nat.o.
* configure.host: Reflect host rename "s390" -> "linux".
* configure.tgt: Reflect rename s390-tdep.o -> s390-linux-tdep.o.
* Makefile.in (ALL_TARGET_OBS): Likewise.
(HFILES_NO_SRCDIR): Reflect rename s390-tdep.h ->
s390-linux-tdep.h.
(ALLDEPFILES): Reflect rename of .c files.
|
|
startup-with-shell" option.
Occasionaly we hear about people having problems with GDB not being
able to start programs (with "run"/"start"). GDB spawns a shell to
start the program, and most often, it'll be the case that the problem
is actually with the user's shell setup.
GDB has code to disable the use of the shell to start programs.
That's the STARTUP_WITH_SHELL macro that native targets could set to 0
in their nm.h file (though no target actually uses it nowadays).
This patch makes that setting a run-time knob instead. This will be
useful to quickly diagnose such shell issues, and might also come in
handy at other times (such as when debugging the shell itself, if you
don't have a different shell handy).
gdb/
2013-10-24 Pedro Alves <palves@redhat.com>
* NEWS (New options): Mention set/show startup-with-shell.
* config/alpha/nm-osf3.h (START_INFERIOR_TRAPS_EXPECTED): Set to 2
instead of 3.
* fork-child.c (fork_inferior, startup_inferior): Handle 'set
startup-with-shell'.
(show_startup_with_shell): New function.
(_initialize_fork_child): Register the set/show startup-with-shell
commands.
* inf-ptrace.c (inf_ptrace_create_inferior): Remove comment.
* inf-ttrace.c (inf_ttrace_him): Remove comment.
* procfs.c (procfs_init_inferior): Remove comment.
* infcmd.c (startup_with_shell): New global.
* inferior.h (startup_with_shell): Declare global.
(STARTUP_WITH_SHELL): Delete.
(START_INFERIOR_TRAPS_EXPECTED): Set to 1 by default instead of 2.
gdb/doc/
2013-10-24 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Document set/show startup-with-shell.
|
|
gdb/
2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Remove solib-sunos.c.
* Makefile.in (ALLDEPFILES): Remove solib-sunos.c.
* config/m68k/obsd.mh (NATDEPFILES): Remove solib-sunos.o.
* objfiles.c (rt_common_objfile): Remove.
(free_objfile): Remove rt_common_objfile comparison.
* objfiles.h (rt_common_objfile): Remove.
* solib-sunos.c: Remove.
* symfile.c (reread_symbols): Remove solib-sunos.c comment.
|
|
gdb/
2013-09-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Remove a.out NetBSD and OpenBSD hosts.
* NEWS (Removed native configurations): New.
* config/arm/nbsdaout.mh: Remove.
* config/i386/nbsdaout.mh: Remove.
* config/i386/obsdaout.mh: Remove.
* config/m68k/nbsdaout.mh: Remove.
* config/sparc/nbsdaout.mh: Remove.
* config/vax/nbsdaout.mh: Remove.
* configure.host (arm*-*-netbsd*, i[34567]86-*-netbsd*)
(i[34567]86-*-openbsd[0-2].*, i[34567]86-*-openbsd3.[0-3])
(m68*-*-netbsd*, sparc-*-netbsd*, vax-*-netbsd*): Add them to obsolete
error.
(arm*-*-netbsd*, i[34567]86-*-netbsd*, i[34567]86-*-openbsd[0-2].*)
(i[34567]86-*-openbsd3.[0-3], m68*-*-netbsd*, sparc-*-netbsdaout*)
(sparc-*-netbsd*, vax-*-netbsd*): Remove.
|
|
* config/s390/s390.mh (NATDEPFILES): Add linux-waitpid.o.
|
|
* config/djgpp/fnchange.lst: Remove entry of
i386-interix-nat.c and i386-interix-tdep.c.
* configure.ac: Remove '*-*-interix*'.
* configure: Re-generated.
* defs.h (enum gdb_osabi): Remove GDB_OSABI_INTERIX.
* i386-cygwin-tdep.c (i386_cygwin_osabi_sniffer): Remove
obsolete comments.
* osabi.c (gdb_osabi_names): Remove "Interix".
|
|
gdbserver use it.
gdb/
* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-nat.h and
nat/linux-waitpid.h.
(linux-waitpid.o): New object file rule.
* common/linux-ptrace.c: Include nat/linux-waitpid.h.
(current_ptrace_options): Moved from linux-nat.c.
(linux_ptrace_test_ret_to_nx): Use type casts for ptrace
parameters.
(linux_fork_to_function): New function.
(linux_grandchild_function): Likewise.
(linux_child_function): Likewise.
(linux_check_ptrace_features): New function, heavily
based on linux-nat.c:linux_test_for_tracefork.
(linux_enable_event_reporting): New function.
(ptrace_supports_feature): Likewise.
(linux_supports_tracefork): Likewise.
(linux_supports_traceclone): Likewise.
(linux_supports_tracevforkdone): Likewise.
(linux_supports_tracesysgood): Likewise.
* common/linux-ptrace.h (HAS_NOMMU): Moved from
gdbserver/linux-low.c.
(linux_enable_event_reporting): New declaration.
(linux_supports_tracefork): Likewise.
(linux_supports_traceclone): Likewise.
(linux_supports_tracevforkdone): Likewise.
(linux_supports_tracesysgood): Likewise.
* config.in (PTRACE_TYPE_ARG4): Regenerate.
* config/aarch64/linux.mh (NATDEPFILES): Add linux-waitpid.o.
* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
* config/arm/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* config/ia64/linux.mh (NATDEPFILES): Likewise.
* config/m32r/linux.mh (NATDEPFILES): Likewise.
* config/m68k/linux.mh (NATDEPFILES): Likewise.
* config/mips/linux.mh (NATDEPFILES): Likewise.
* config/pa/linux.mh (NATDEPFILES): Likewise..
* config/powerpc/linux.mh (NATDEPFILES): Likewise..
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
* config/sparc/linux.mh (NATDEPFILES): Likewise.
* config/sparc/linux64.mh (NATDEPFILES): Likewise.
* config/tilegx/linux.mh (NATDEPFILES): Likewise.
* config/xtensa/linux.mh (NATDEPFILES): Likewise.
* configure.ac (AC_CACHE_CHECK): Add void * to the list of
ptrace's 4th argument's types.
Check the type of PTRACE_TYPE_ARG4.
* configure: Regenerate.
* linux-nat.c: Include nat/linux-nat.h and nat/linux-waitpid.h.
(SYSCALL_SIGTRAP): Moved to nat/linux-nat.h.
(linux_supports_tracefork_flag): Remove.
(linux_supports_tracesysgood_flag): Likewise.
(linux_supports_tracevforkdone_flag): Likewise.
(current_ptrace_options): Moved to
common/linux-ptrace.c.
(linux_tracefork_child): Remove.
(my_waitpid): Remove.
(linux_test_for_tracefork): Renamed to
linux_check_ptrace_features and moved to common/linux-ptrace.c.
(linux_test_for_tracesysgood): Remove.
(linux_supports_tracesysgood): Remove.
(linux_supports_tracefork): Remove.
(linux_supports_tracevforkdone): Remove.
(linux_enable_tracesysgood): Remove.
(linux_enable_event_reporting): Remove.
(linux_init_ptrace): New function.
(linux_child_post_attach): Call linux_init_ptrace.
(linux_child_post_startup_inferior): Call linux_init_ptrace.
(linux_child_follow_fork): Call linux_supports_tracefork
and linux_supports_tracevforkdone.
(linux_child_insert_fork_catchpoint): Call
linux_supports_tracefork.
(linux_child_insert_vfork_catchpoint): Likewise.
(linux_child_set_syscall_catchpoint): Call
linux_supports_tracesysgood.
(lin_lwp_attach_lwp): Call linux_supports_tracefork.
* nat/linux-nat.h: New file.
* nat/linux-waitpid.c: New file.
* nat/linux-waitpid.h: New file.
gdb/gdbserver/
* Makefile.in: Explain why ../target and ../nat are not
listed as include file search paths.
(linux-waitpid.o): New object file rule.
* configure.srv (srv_native_linux_obj): New variable.
Replace all occurrences of linux native object files with
$srv_native_linux_obj.
* linux-low.c: Include nat/linux-nat.h and nat/linux-waitpid.h.
(HAS_NOMMU): Move defining logic to common/linux-ptrace.c.
(linux_enable_event_reporting): Remove declaration.
(my_waitpid): Moved to common/linux-waitpid.c.
(linux_wait_for_event): Pass ptid when calling
linux_enable_event_reporting.
(linux_supports_tracefork_flag): Remove.
(linux_enable_event_reporting): Likewise.
(linux_tracefork_grandchild): Remove.
(STACK_SIZE): Moved to common/linux-ptrace.c.
(linux_tracefork_child): Remove.
(linux_test_for_tracefork): Remove.
(linux_look_up_symbols): Call linux_supports_traceclone.
(initialize_low): Remove call to linux_test_for_tracefork.
* linux-low.h (PTRACE_TYPE_ARG3): Move to
common/linux-ptrace.h.
(PTRACE_TYPE_ARG4): Likewise.
Include linux-ptrace.h.
|
|
* Makefile.in (HFILES_NO_SRCDIR): Add
common/mips-linux-watch.h.
(mips-linux-watch.o): New rule.
* common/mips-linux-watch.c: New.
* common/mips-linux-watch.h: New.
* config/mips/linux.mh (NATDEPFILES): Add mips-linux-watch.o
* mips-linux-nat.c: Include mips-linux-watch.h.
(W_BIT, R_BIT, I_BIT, W_MASK, R_MASK, I_MASK, IRW_MASK): Move
to common/mips-linux-watch.h.
(MAX_DEBUG_REGISTER): Likewise.
(enum pt_watch_style): Likewise.
(struct mips32_watch_regs): Likewise.
(struct mips64_watch_regs): Likewise.
(struct pt_watch_regs): Likewise.
(struct mips_watchpoint): Likewise.
(mips_linux_watch_get_irw_mask): Move to
common/mips-linux-watch.c.
(get_reg_mask, mips_linux_watch_get_num_valid): Likewise.
(mips_linux_watch_get_watchlo): Likewise.
(mips_linux_watch_set_watchlo): Likewise.
(mips_linux_watch_get_watchhi): Likewise.
(mips_linux_watch_set_watchhi): Likewise.
(mips_linux_read_watch_registers): Likewise.
(mips_linux_watch_type_to_irw): Likewise.
(mips_linux_stopped_data_address, fill_mask): Likewise.
(mips_linux_watch_try_one_watch): Likewise.
(mips_linux_watch_populate_regs): Likewise.
|
|
With the pathmax gnulib module in place, we can use PATH_MAX
consistently throughout, instead of the current mixbag of PATH_MAX and
MAXPATHLEN uses. It's no longer necessary to include sys/param.h
(supposedly, I can't check all ports touched here) for MAXPATHLEN.
Don't remove sys/param.h from GDB's configure.ac, as later tests in
the file use HAVE_SYS_PARAM_H checks.
Tested on x86_64 Fedora 17.
Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* defs.h: Include "pathmax.h".
* utils.c: Don't include sys/param.h.
(gdb_realpath): Remove code that checks for MAXPATHLEN.
* solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
instead of MAXPATHLEN.
* solib-sunos.c: Don't include sys/param.h.
* xcoffread.c: Don't include sys/param.h.
* bsd-kvm.c: Don't include sys/param.h.
* darwin-nat.c: Don't include sys/param.h.
(darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* darwin-nat-info.c: Don't include sys/param.h.
* fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
MAXPATHLEN.
* i386obsd-nat.c: Don't include sys/param.h.
* inf-child.c: Don't include sys/param.h.
(inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
* linux-fork.c: Don't include sys/param.h.
(fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
* linux-nat.c: Don't include sys/param.h.
(linux_child_pid_to_exec_file, linux_proc_pending_signals)
(linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
* m68klinux-nat.c: Don't include sys/param.h.
* nbsd-nat.c: Don't include sys/param.h.
(nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* ppc-linux-nat.c: Don't include sys/param.h.
* rs6000-nat.c: Don't include sys/param.h.
* spu-linux-nat.c. Don't include sys/param.h.
* windows-nat.c: Don't include sys/param.h.
* xtensa-linux-nat.c: Don't include sys/param.h.
* config/i386/nm-fbsd.h: Don't include sys/param.h.
gdb/gdbserver/
2013-07-01 Pedro Alves <palves@redhat.com>
* server.h: Include "pathmax.h".
* linux-low.c: Don't include sys/param.h.
(linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of
MAXPATHLEN.
* win32-low.c: Don't include sys/param.h.
(win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN.
|
|
... using the target_so_ops framework.
gdb/ChangeLog:
* target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
* features/library-list-aix.dtd: New file.
* solib-aix.h, solib-aix.c: New file.
* rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
(rs6000_find_toc_address_hook): Delete.
(rs6000_push_dummy_call): Rewrite code setting the TOC value.
(rs6000_aix_init_osabi): Register solib_aix_so_ops.
* rs6000-nat.c: Remove "xcoffsolib.h" include. Include
"xml-utils.h".
(map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
(vmap_symtab, fixup_breakpoints): Delete.
(rs6000_xfer_shared_libraries): New function.
(rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
(vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
(xcoff_relocate_symtab, xcoff_relocate_core): Delete.
(rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
(rs6000_xfer_shared_library): New function.
(find_toc_address): Delete.
(_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
* rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
* xcoffread.c (record_minimal_symbol): Reloate symbol address
before creating minimal symbol. Adjust function description
accordingly.
(scan_xcoff_symtab): Replace call to
prim_record_minimal_symbol_and_info by call to
record_minimal_symbol.
(xcoff_symfile_offsets): Reimplement mostly as a wrapper
around default_symfile_offsets.
* configure.tgt: Add solib-aix.o to gdb_target_obs for
powerpc-aix targets.
* config/rs6000/nm-rs6000.h: Delete.
* config/powerpc/aix.mh (NAT_FILE): Delete.
(NATDEPFILES): Remove xcoffsolib.o.
* Makefile.in (XMLFILES): Add library-list-aix.dtd.
(ALL_TARGET_OBS): Add solib-aix.o.
(HFILES_NO_SRCDIR): Remove xcoffsolib.h and
config/rs6000/nm-rs6000.h. Add solib-aix.h.
(ALLDEPFILES): Add solib-aix.c. Remove xcoffsolib.c.
* xcoffsolib.h, xcoffsolib.c: Delete.
* solib.c (reload_shared_libraries): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK.
* breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
(disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
(momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
comment.
* corelow.c (deprecated_core_resize_section_table): Delete.
* exec.c: Remove include of xcoffsolib.h".
(map_vmap, vmap): Delete.
(exec_close_1): Remove references to vmap.
(exec_file_attach): Remove vmap handling code, and reference
to DEPRECATED_IBM6000_TARGET.
(bfdsec_to_vmap): Delete.
(exec_files_info): Remove block of code handling VMAP.
* infcmd.c (post_create_inferior): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
* infrun.c (follow_exec): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK.
* stack.c (print_frame): Remove reference to PC_SOLIB.
* solib-dsbt.c (dsbt_current_sos): Adjust comment.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (frv_current_sos): Likewise.
gdb/doc/ChangeLog:
* gdbint.texinfo (Algorithms): Remove entries documenting
DEPRECATED_IBM6000_TARGET, SOLIB_ADD, and
SOLIB_CREATE_INFERIOR_HOOK.
|
|
* Makefile.in (HAVE_NATIVE_GCORE_TARGET): New.
(generated_files): Add gcore.
(install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or
HAVE_NATIVE_GCORE_HOST.
(gcore): New.
* NEWS (Changes since GDB 7.6): Mention newly installed gcore.
* config/alpha/alpha-osf3.mh, config/i386/fbsd.mh,
config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh,
config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh,
config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh:
Add HAVE_NATIVE_GCORE_HOST.
* configure: Regenerate.
* configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it.
New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME. New
AC_CONFIG_FILES for gcore.
* configure.tgt: Add gdb_have_gcore to the initial comment. Set
gdb_have_gcore.
* gdb_gcore.sh: Rename to ...
* gcore.in: ... here. Remove gcore.sh comment. Use GDB_TRANSFORM_NAME
and GCORE_TRANSFORM_NAME substitutions.
gdb/doc/
* Makefile.in (MAN1S): Add gcore.1.
Remove "Host, target, and site specific Makefile fragments" comment.
(@host_makefile_frag@, HAVE_NATIVE_GCORE_TARGET): New.
(install-man1, uninstall-man1): Conditionalize gcore.1.
(gcore.1): New.
* gdb.texinfo (Man Pages): Add gcore man.
(gcore man): New node.
|
|
gdb/
* amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
(amd64_linux_enable_btrace): New.
(amd64_linux_disable_btrace): New.
(amd64_linux_teardown_btrace): New.
(_initialize_amd64_linux_nat): Initialize btrace ops.
* i386-linux.nat.c: Include btrace.h and linux-btrace.h.
(i386_linux_enable_btrace): New.
(i386_linux_disable_btrace): New.
(i386_linux_teardown_btrace): New.
(_initialize_i386_linux_nat): Initialize btrace ops.
* config/i386/linux.mh: Add linux-btrace.o.
* config/i386/linux64.mh: Add linux-btrace.o.
|
|
* configure.tgt: Add x86_64-*-cygwin* as target.
* config/i386/cygwin64.mh: New file.
* gdbserver/configure.srv: Add x86_64-*-cygwin* as target.
|
|
While writing the previous patch, I noticed that we're not consistent
with the (C) in the copyright header. The maintainers manual prefers
having it, though also says it's optional. We have over 10x more
files with (C) than without in gdb's code, so I spent a few minutes
grepping and fixing. Funny enough, the testsuite has it backwards.
I'll leave that for another time.
gdb/
2013-02-12 Pedro Alves <palves@redhat.com>
* amd64-darwin-tdep.c: Add (C) after Copyright.
* cli/cli-cmds.h: Ditto.
* cli/cli-decode.c: Ditto.
* cli/cli-decode.h: Ditto.
* cli/cli-dump.c: Ditto.
* cli/cli-dump.h: Ditto.
* cli/cli-interp.c: Ditto.
* cli/cli-logging.c: Ditto.
* cli/cli-script.c: Ditto.
* cli/cli-script.h: Ditto.
* cli/cli-setshow.c: Ditto.
* cli/cli-setshow.h: Ditto.
* cli/cli-utils.c: Ditto.
* cli/cli-utils.h: Ditto.
* config/alpha/nm-osf3.h: Ditto.
* config/djgpp/djconfig.sh: Ditto.
* config/i386/nm-fbsd.h: Ditto.
* config/i386/nm-i386gnu.h: Ditto.
* config/nm-linux.h: Ditto.
* config/nm-nto.h: Ditto.
* config/rs6000/nm-rs6000.h: Ditto.
* config/sparc/nm-sol2.h: Ditto.
* darwin-nat-info.c: Ditto.
* dfp.c: Ditto.
* dfp.h: Ditto.
* gdb-demangle.h: Ditto.
* i386-darwin-nat.c: Ditto.
* i386-darwin-tdep.c: Ditto.
* linux-fork.h: Ditto.
* m32c-tdep.c: Ditto.
* microblaze-linux-tdep.c: Ditto.
* microblaze-rom.c: Ditto.
* microblaze-tdep.c: Ditto.
* microblaze-tdep.h: Ditto.
* mips-linux-tdep.h: Ditto.
* ppc-ravenscar-thread.c: Ditto.
* ppc-ravenscar-thread.h: Ditto.
* prologue-value.c: Ditto.
* prologue-value.h: Ditto.
* ravenscar-thread.c: Ditto.
* ravenscar-thread.h: Ditto.
* sparc-ravenscar-thread.c: Ditto.
* sparc-ravenscar-thread.h: Ditto.
* tilegx-linux-tdep.c: Ditto.
* unwind_stop_reasons.def: Ditto.
* windows-nat.h: Ditto.
* xtensa-linux-tdep.c: Ditto.
* xtensa-xtregs.c: Ditto.
* regformats/regdat.sh: Ditto.
* regformats/regdef.h: Ditto.
gdb/gdbserver/
2013-02-12 Pedro Alves <palves@redhat.com>
* linux-xtensa-low.c: Ditto.
* xtensa-xtregs.c: Ditto.
|
|
2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
Marcus Shawcroft <marcus.shawcroft@arm.com>
Nigel Stephens <nigel.stephens@arm.com>
Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64-linux-nat.c: New file.
* config/aarch64/linux.mh: New file.
* configure.host: Add AArch64.
* Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
|
|
* Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
* configure.host: Add powerpc*-*-freebsd* target.
* configure.tgt: Add target info for powerpc*-*-freebsd*.
* ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
* config/powerpc/fbsd.mh: New file.
|
|
* configure: Rebuild.
* configure.ac: Add somread.o to the build if BFD has SOM
support.
* somread.c: Include som/aout.h, not syms.h.
(som_symtab_read): Use som_external_symbol_dictionary_record.
Unpack records manually.
(_initialize_somread): Declare.
|
|
* configure.ac: Check for Mach-O support in BFD. Update
CONFIG_OBS.
* configure: Rebuild.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
gdb:
* ChangeLog-2012: Renamed from ChangeLog:
* ChangeLog: New file.
* config/djgpp/fnchange.lst: Add entry for ChangeLog-2012.
|
|
These are old files that GDB does not use anymore, and probably has not
used for a long time.
gdb/ChangeLog:
* osf-share/AT386/cma_thread_io.h: Delete.
* osf-share/HP800/cma_thread_io.h: Delete.
* osf-share/README: Delete.
* osf-share/RIOS/cma_thread_io.h: Delete.
* osf-share/cma_attr.h: Delete.
* osf-share/cma_deb_core.h: Delete.
* osf-share/cma_debug_client.h: Delete.
* osf-share/cma_errors.h: Delete.
* osf-share/cma_handle.h: Delete.
* osf-share/cma_init.h: Delete.
* osf-share/cma_list.h: Delete.
* osf-share/cma_mutex.h: Delete.
* osf-share/cma_sched.h: Delete.
* osf-share/cma_semaphore_defs.h: Delete.
* osf-share/cma_sequence.h: Delete.
* osf-share/cma_stack.h: Delete.
* osf-share/cma_stack_int.h: Delete.
* osf-share/cma_tcb_defs.h: Delete.
* osf-share/cma_util.h: Delete.
* Makefile.in (HFILES_NO_SRCDIR): Remove entries for the files
in osf-share.
* config/djgpp/fnchange.lst: Remove osf-share/cma_stack_int.h entry.
* contrib/ari/gdb_find.sh: Remove handling of osf-share.
* copyright.sh (NOT_FSF_LIST): Remove "gdb/osf-share" entry.
|
|
gdb/ChangeLog:
* config/djgpp/djcheck.sh: Add copyright header.
|
|
* configure.host (gdb_host_cpu): Handle tilegx*.
(gdb_host): Handle tilegx-*-linux*.
* tilegx-linux-nat.c: New file.
* config/tilegx/linux.mh: New file.
|
|
gdb/testsuite/ChangeLog:
* gdb.base/print-file-var-lib1.c, gdb.base/print-file-var-lib2.c,
gdb.base/print-file-var-main.c, gdb.base/print-file-var.exp:
New files.
gdb/ChangeLog:
* config/djgpp/fnchange.lst: Add entries for print-file-var-lib1.c,
print-file-var-lib2.c, print-file-var-main.c and
print-file-var.exp (located in gdb/testsuite/gdb.base).
|
|
* Makefile.in (linux-ptrace.o): New.
* common/linux-procfs.c (linux_proc_pid_is_zombie): New,
from linux-nat.c.
* common/linux-procfs.h (linux_proc_pid_is_zombie): New declaration.
* common/linux-ptrace.c: New file.
* config/alpha/alpha-linux.mh (NATDEPFILES): Add linux-ptrace.o.
* config/arm/linux.mh: Likewise.
* config/i386/linux.mh: Likewise.
* config/i386/linux64.mh: Likewise.
* config/ia64/linux.mh: Likewise.
* config/m32r/linux.mh: Likewise.
* config/m68k/linux.mh: Likewise.
* config/mips/linux.mh: Likewise.
* config/pa/linux.mh: Likewise.
* config/powerpc/linux.mh: Likewise.
* config/powerpc/ppc64-linux.mh: Likewise.
* config/powerpc/spu-linux.mh: Likewise.
* config/s390/s390.mh: Likewise.
* config/sparc/linux.mh: Likewise.
* config/sparc/linux64.mh: Likewise.
* config/xtensa/linux.mh: Likewise.
* linux-nat.c (linux_lwp_is_zombie): Remove, move it to
common/linux-procfs.c.
(wait_lwp): Rename linux_lwp_is_zombie to linux_proc_pid_is_zombie.
gdb/gdbserver/
* Makefile.in (linux-ptrace.o): New.
* configure.srv (arm*-*-linux*, bfin-*-*linux*, crisv32-*-linux*)
(cris-*-linux*, i[34567]86-*-linux*, ia64-*-linux*, m32r*-*-linux*)
(m68*-*-linux*, m68*-*-uclinux*, mips*-*-linux*, powerpc*-*-linux*)
(s390*-*-linux*, sh*-*-linux*, sparc*-*-linux*, tic6x-*-uclinux)
(x86_64-*-linux*, xtensa*-*-linux*): Add linux-ptrace.o to SRV_TGTOBJ
of these targets.
* linux-low.c (linux_attach_lwp_1): Remove redundent else clause.
|
|
PR gdb/12953
* Makefile.in (HFILES_NO_SRCDIR): Add amd64bsd-nat.h.
* amd64bsd-nat.c: Add support for debug registers (adapted from
i386bsd-nat.c).
[HAVE_PT_GETDBREGS] (amd64bsd_dr_get, amd64bsd_dr_set)
(amd64bsd_dr_set_control, amd64bsd_dr_set_addr)
(amd64bsd_dr_get_addr, amd64bsd_dr_get_status)
(amd64bsd_dr_get_control): New functions.
* amd64bsd-nat.h: New file (adapted from i386bsd-nat.h).
* amd64fbsd-nat.c: Include "amd64bsd-nat.h", "i386-nat.h".
[HAVE_PT_GETDBREGS] (_initialize_amd64fbsd_nat): Add hardware
watchpoints initialization.
* config/i386/fbsd64.mh (NATDEPFILES): Add i386-nat.o.
|
|
Fix duplicate .o files after omitting libbfd.a.
* Makefile.in (ALL_TARGET_OBS): Remove corelow.o.
(SFILES): Add corelow.c.
(COMMON_OBS): Add corelow.o.
(ALLDEPFILES): Remove corelow.c.
* config/alpha/alpha-linux.mh (NATDEPFILES): Remove corelow.o.
* config/alpha/alpha-osf3.mh: Likewise.
* config/alpha/fbsd.mh: Likewise.
* config/arm/nbsdaout.mh: Likewise.
* config/arm/nbsdelf.mh: Likewise.
* config/i386/i386gnu.mh: Likewise.
* config/ia64/hpux.mh: Likewise.
* config/ia64/linux.mh: Likewise.
* config/m32r/linux.mh: Likewise.
* config/m68k/linux.mh: Likewise.
* config/mips/irix5.mh: Likewise.
* config/mips/irix6.mh: Likewise.
* config/pa/hpux.mh: Likewise.
* config/pa/linux.mh: Likewise.
* config/powerpc/aix.mh: Likewise.
* config/sparc/linux.mh: Likewise.
* config/sparc/linux64.mh: Likewise.
* config/sparc/sol2.mh: Likewise.
* config/vax/vax.mh: Likewise.
* configure.tgt (alpha*-*-freebsd* alpha*-*-kfreebsd*-gnu)
(alpha*-*-netbsd*, alpha*-*-knetbsd*-gnu, alpha*-*-openbsd*)
(am33_2.0*-*-linux*, arm*-wince-pe, arm*-*-mingw32ce*, arm*-*-linux*)
(arm*-*-openbsd*, cris*, frv-*-*, hppa*-*-hpux*, hppa*-*-netbsd*)
(hppa*-*-openbsd*, i[34567]86-*-dicos*, i[34567]86-*-freebsd*)
(i[34567]86-*-kfreebsd*-gnu, i[34567]86-*-netbsd*)
(i[34567]86-*-knetbsd*-gnu, i[34567]86-*-openbsd*, i[34567]86-*-nto*)
(i[34567]86-*-solaris2.1[0-9]*, x86_64-*-solaris2.1[0-9]*)
(i[34567]86-*-solaris*, i[34567]86-*-linux*, i[34567]86-*-cygwin*)
(i[34567]86-*-mingw32*, m68*-*-netbsd*, m68*-*-knetbsd*-gnu)
(m68*-*-openbsd*, m88*-*-openbsd*, microblaze*-linux-*)
(microblaze*-*-linux*, mips*-*-linux*, mips*-*-netbsd*)
(mips*-*-knetbsd*-gnu, mips64*-*-openbsd*, powerpc-*-netbsd*)
(powerpc-*-knetbsd*-gnu, powerpc-*-openbsd*, powerpc-*-linux*)
(powerpc64-*-linux*, s390*-*-*, score-*-*, sh*-*-linux*)
(sh*-*-netbsdelf*, sh*-*-knetbsd*-gnu, sh*-*-openbsd*)
(sparc*-*-freebsd*, sparc*-*-kfreebsd*-gnu, sparc-*-netbsd*)
(sparc-*-knetbsd*-gnu, sparc64-*-netbsd*, sparc64-*-knetbsd*-gnu)
(sparc-*-openbsd*, sparc64-*-openbsd*, tic6x-*-*linux, vax-*-netbsd*)
(vax-*-knetbsd*-gnu, vax-*-openbsd*, x86_64-*-dicos*, x86_64-*-linux*)
(x86_64-*-freebsd*, x86_64-*-kfreebsd*-gnu, x86_64-*-netbsd*)
(x86_64-*-knetbsd*-gnu, x86_64-*-openbsd*, xtensa*-*-linux*): Remove
corelow.o from gdb_target_obs.
* corefile.c (core_target): Update the comment on NULL value.
(core_file_command): Replace error by gdb_assert on CORE_TARGET.
* corelow.c (sniff_core_bfd): Call error instead of warning on zero
MATCHES. Drop YUMMY set on NULL.
(core_close): Do not call exit_inferior_silent on zero PID. Do not
reclaim CORE_DATA if it is already NULL.
|
|
Partially fix duplicate .o files after omitting libbfd.a.
* config/alpha/alpha-osf3.mh (NATDEPFILES): Remove solib.o.
* config/i386/nbsdaout.mh (NATDEPFILES): Remove solib.o.
* config/i386/obsdaout.mh (NATDEPFILES): Remove solib.o.
* config/m68k/nbsdaout.mh (NATDEPFILES): Remove solib.o.
* config/m68k/obsd.mh (NATDEPFILES): Remove solib.o.
* config/powerpc/aix.mh (NATDEPFILES): Remove xcoffread.o.
* config/vax/nbsdaout.mh (NATDEPFILES): Remove solib.o.
|
|
* config/s390/s390.mh (NATDEPFILES): Remove corelow.o.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
gdb/ChangeLog:
* config/djgpp/fnchange.lst: Add entry for ChangeLog-2011.
|
|
* config/s390/s390.mh (NATDEPFILES): Add linux-procfs.o dependency.
|
|
|
|
* gdb.texinfo (Standard Target Features): Document C6x features.
(TIC6x Features): New node.
gdb/
* features/Makefile (WHICH): Add tic6x-c64xp tic6x-c64x tic6x-c62x
tic6x-c64xp-linux tic6x-c64x-linux and tic6x-c62x-linux.
* features/tic6x-c6xp.xml, features/tic6x-core.xml: New.
* features/tic6x-gp.xml, features/tic6x-c62x.xml: New.
* features/tic6x-c64x.xml, features/tic6x-c64xp.xml: New.
* features/tic6x-c62x-linux.xml, features/tic6x-c64x-linux.xml: New.
* features/tic6x-c64xp-linux.xml: New.
* features/tic6x-c64xp.c, features/tic6x-c64x.c: Generated.
* features/tic6x-c62x.c, features/tic6x-c64xp-linux.c: Generated.
* features/tic6x-c64x-linux.c, features/tic6x-c62x-linux.c: Generated.
* regformats/tic6x-c62x.dat, regformats/tic6x-c64x.dat: Generated.
* regformats/tic6x-c64xp.dat, regformats/tic6x-c62x-linux.dat: Generated.
* regformats/tic6x-c64x-linux.dat, regformats/tic6x-c64xp-linux.dat: Generated.
* config/djgpp/fnchange.lst: Add features/tic6x-*.xml and
features/tic6x-*.c files.
Add regformats/tic6x-*.dat files.
|
|
gdb/
* defs.h: Add guard against inclusion in gdbserver.
(struct ptid, ptid_t): Move to common/ptid.h.
(xfree, xzalloc, xasprintf, xvasprintf, xstrprintf, xstrvprintf,
xsnprintf, internal_error): Move to common/common-utils.h.
(nomem): Delete.
* gdb_assert.h: Move into common/ sub-directory.
* gdb_locale.h: Ditto.
* gdb_dirent.h: Ditto.
* inferior.h (minus_one_ptid, null_ptid, ptid_build, pid_to_ptid,
ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid):
Move into common/ptid.h.
* xml-support.c (xml_escape_text): Move into common/xml-utils.c.
(gdb_xml_create_parser_and_cleanup_1, xml_fetch_context_from_file):
Change nomem to malloc_failure.
* xml-support.h (xml_escape_text): Move into common/xml-utils.h.
* utils.c (nomem): Rename to malloc_failure.
(xmalloc, xzalloc, xrealloc, xcalloc, xfree, xstrprintf, xasprintf,
xvasprintf, xstrvprintf, xsnprintf): Move to common/common-utils.c.
(gdb_buildargv): Change nomem to malloc_failure.
* infrun.c (null_ptid, minus_one_ptid, ptid_build, pid_to_ptid,
ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal,
ptid_is_pid): Move into common/ptid.c.
(initialize_infrun): Delete initialization of null_ptid and
minus_one_ptid.
* linux-nat.c (linux_nat_xfer_osdata): Defer to
linux_common_xfer_osdata.
* Makefile.in (SFILES): Add common/common-utils.c, common/xml-utils.c,
common/ptid.c and common/buffer.c.
(HFILES_NO_SRCDIR): Add common/common-utils.h, common/xml-utils.h,
common/ptid.h, common/buffer.h and common/linux-osdata.h.
(COMMON_OBS): Add xml-utils.o, common-utils.o, buffer.o and ptid.o.
(common-utils.o, xml-utils.o, ptid.o, buffer.o, linux-osdata.o): New
rules.
* common/gdb_assert.h: New.
* common/gdb_dirent.h: New.
* common/gdb_locale.h: New.
* common/buffer.c: New.
* common/buffer.h: New.
* common/ptid.c: New.
* common/ptid.h: New.
* common/xml-utils.c: New.
* common/xml-utils.h: New.
* common/common-utils.c: New.
* common/common-utils.h: New.
* common/linux-osdata.c: New.
* common/linux-osdata.h: New.
* config/alpha/alpha-linux.mh (NATDEPFILES): Add linux-osdata.o.
* config/arm/linux.mh (NATDEPFILES): Ditto.
* config/i386/linux.mh (NATDEPFILES): Ditto.
* config/i386/linux64.mh (NATDEPFILES): Ditto.
* config/ia64/linux.mh (NATDEPFILES): Ditto.
* config/m32r/linux.mh (NATDEPFILES): Ditto.
* config/m68k/linux.mh (NATDEPFILES): Ditto.
* config/mips/linux.mh (NATDEPFILES): Ditto.
* config/pa/linux.mh (NATDEPFILES): Ditto.
* config/powerpc/linux.mh (NATDEPFILES): Ditto.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Ditto.
* config/s390/s390.mh (NATDEPFILES): Ditto.
* config/sparc/linux.mh (NATDEPFILES): Ditto.
* config/sparc/linux64.mh (NATDEPFILES): Ditto.
* config/xtensa/linux.mh (NATDEPFILES): Ditto.
gdbserver/
* linux-low.c (compare_ints, unique, list_threads, show_process,
linux_core_of_thread): Delete.
(linux_target_ops): Change linux_core_of_thread to
linux_common_core_of_thread.
(linux_qxfer_osdata): Defer to linux_common_xfer_osdata.
* utils.c (malloc_failure): Change type of argument.
(xmalloc, xrealloc, xcalloc, xsnprintf): Delete.
* Makefile.in (SFILES): Add common/common-utils.c, common/xml-utils.c,
common/linux-osdata.c, common/ptid.c and common/buffer.c.
(OBS): Add xml-utils.o, common-utils.o, ptid.o and buffer.o.
(IPA_OBJS): Add common-utils-ipa.o.
(ptid_h, linux_osdata_h): New macros.
(server_h): Add common/common-utils.h, common/xml-utils.h,
common/buffer.h, common/gdb_assert.h, common/gdb_locale.h and
common/ptid.h.
(common-utils-ipa.o, common-utils.o, xml-utils.o, linux-osdata.o,
ptid.o, buffer.o): New rules.
(linux-low.o): Add common/linux-osdata.h as a dependency.
* configure.srv (srv_tgtobj): Add linux-osdata.o to Linux targets.
* configure.ac: Add AC_HEADER_DIRENT check.
* config.in: Regenerate.
* configure: Regenerate.
* remote-utils.c (xml_escape_text): Delete.
(buffer_grow, buffer_free, buffer_init, buffer_finish,
buffer_xml_printf): Move to common/buffer.c.
* server.c (main): Remove call to initialize_inferiors.
* server.h (struct ptid, ptid_t, minus_one_ptid, null_ptid,
ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid,
ptid_equal, ptid_is_pid, initialize_inferiors, xml_escape_text,
internal_error, gdb_assert, gdb_assert_fail): Delete.
(struct buffer, buffer_grow, buffer_free, buffer_init, buffer_finish,
buffer_xml_printf, buffer_grow_str, buffer_grow_str0): Move to
common/buffer.h.
* inferiors.c (null_ptid, minus_one_ptid, ptid_build, pid_to_ptid,
ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid,
initialize_inferiors): Delete.
|
|
ChangeLog:
* configure.ac: Remove readline, mmalloc, and gdb from noconfigdirs
for ia64-hpux.
* configure: Regenerate.
gdb/ChangeLog:
* config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
* configure.host: Add handling for ia64-hpux hosts. Add associated
floatformats.
* configure.tgt: Add handling for ia64-hpux targets.
* Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
(HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
(ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
|
|
|
