aboutsummaryrefslogtreecommitdiff
path: root/gdb/config
AgeCommit message (Collapse)AuthorFilesLines
2023-01-01Update copyright year range in header of all files managed by GDBJoel Brobecker8-8/+8
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023.
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker8-8/+8
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-07-06Rename gdb/ChangeLog to gdb/ChangeLog-2021Joel Brobecker1-0/+1
Now that ChangeLog entries are no longer used for GDB patches, this commit renames the file gdb/ChangeLog to gdb/ChangeLog-2021, similar to what we would do in the context of the "Start of New Year" procedure. The purpose of this change is to avoid people merging ChangeLog entries by mistake when applying existing commits that they are currently working on.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker8-8/+8
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2021-01-01Rotate gdb/ChangeLogJoel Brobecker1-0/+1
As a results of the rotation, this introduces a new file which needed to be added to DJGPP's fnchange.lst. gdb/ChangeLog * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2020.
2020-06-01hurd: Add shared mig declarationsSamuel Thibault1-1/+1
We are using -Werror=missing-declarations, and the _S.h files generated by mig do not currently include a declaration for the server routine. gnu-nat.c used to have its own external declarations, but better just share them between gnu-nat.c and the _S.c files. Fixes exc_request_S.c:177:24: error: no previous declaration for ‘exc_server’ [-Werror=missing-declarations] 177 | mig_external boolean_t exc_server gdb/ChangeLog: * config/i386/i386gnu.mn [%_S.o %_U.o] (COMPILE.post): Add "-include gnu-nat-mig.h". * gnu-nat-mig.h: New file. * gnu-nat.c: Include "gnu-nat-mig.h". (exc_server, msg_reply_server, notify_server, process_reply_server): Remove declarations.
2020-05-30hurd: add missing awk script dependencySamuel Thibault1-1/+1
To make sure the *_reply_S.[ch] files get regenerated whenever we change the awk script. gdb/ChangeLog: * config/i386/i386gnu.mn (%_reply_S.c): Add dependency on $(srcdir)/reply_mig_hack.awk.
2020-01-01Update copyright year range in all GDB files.Joel Brobecker8-8/+8
gdb/ChangeLog: Update copyright year range in all GDB files.
2020-01-01Rotate gdb/ChangeLog (start of New Year procedure)Joel Brobecker1-0/+1
gdb/ChangeLog: * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2019
2019-09-20Remove Cell Broadband Engine debugging supportUlrich Weigand1-9/+0
This patch implements removal of Cell/B.E. support, including - Support for the spu-*-* target - Support for native stand-alone SPU debugging - Support for integrated debugging of combined PPU/SPU applications - Remote debugging (gdbserver) support for all the above. The patch also removes the TARGET_OBJECT_SPU target object type, as this is available only on Cell/B.E. targets, including - Native Linux support - Core file support (including core file generation) - Remote target support, including removal of the qXfer:spu:read and qXfer:spu:write remote protocal packets and associated support in gdbserver. gdb/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * NEWS: Mention that Cell/B.E. debugging support was removed. * MAINTAINERS: Remove spu target. * config/djgpp/fnchange.lst: Remove entries for removed files. * Makefile.in (ALL_TARGET_OBS): Remove solib-spu.o, spu-multiarch.o, and spu-tdep.o. (HFILES_NO_SRCDIR): Remove solib-spu.h and spu-tdep.h. (ALLDEPFILES): Remove solib-spu.c, spu-linux-nat.c, spu-multiarch.c, and spu-tdep.c. * spu-linux-nat.c: Remove file. * spu-multiarch.c: Remove file. * spu-tdep.c: Remove file. * spu-tdep.h: Remove file. * solib-spu.c: Remove file. * solib-spu.h: Remove file. * configure.host (powerpc64*-*-linux*): Remove Cell/B.E. support. * configure.nat (spu-linux): Remove. * configure.tgt (powerpc*-*-linux*): Remove solib-spu.o and solib-multiarch.o from gdb_target_obs. (spu*-*-*): Remove. * arch/ppc-linux-common.h (struct ppc_linux_features): Remove "cell" feature flag. (ppc_linux_no_features): Update. * arch/ppc-linux-common.c (ppc_linux_match_description): Remove Cell/B.E. support. * arch/ppc-linux-tdesc.h (tdesc_powerpc_cell32l): Remove declaration. (tdesc_powerpc_cell64l): Likewise. * nat/ppc-linux.h (PPC_FEATURE_CELL): Remove. * ppc-linux-nat.c (ppc_linux_nat_target::read_description): Remove Cell/B.E. support. * ppc-linux-tdep.h: Do not include "solib-spu.h" or "spu-tdep.h". Do not include "features/rs6000/powerpc-cell32l.c" or "features/rs6000/powerpc-cell64l.c". (ppc_linux_spu_section): Remove. (ppc_linux_core_read_description): Remove Cell/B.E. support. (spe_context_objfile, spe_context_lm_addr, spe_context_offset, spe_context_cache_ptid, spe_context_cache_ptid): Remove. (ppc_linux_spe_context_lookup): Remove. (ppc_linux_spe_context_inferior_created): Remove. (ppc_linux_spe_context_solib_loaded): Remove. (ppc_linux_spe_context_solib_unloaded): Remove. (ppc_linux_spe_context): Remove. (struct ppu2spu_cache): Remove. (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register): Remove. (struct ppu2spu_data): Remove. (ppu2spu_unwind_register, ppu2spu_sniffer, ppu2spu_dealloc_cache, ppu2spu_unwind): Remove. (ppc_linux_init_abi): Remove Cell/B.E. support. * rs6000-tdep.h (rs6000_gdbarch_init): Remove Cell/B.E. support. * features/Makefile (rs6000/powerpc-cell32l-expedite): Remove. (rs6000/powerpc-cell64l-expedite): Likewise (WHICH): Remove rs6000/powerpc-cell32l and rs6000/powerpc-cell64l. (XMLTOC): Remove rs6000/powerpc-cell32l.xml and rs6000/powerpc-cell64l.xml. * features/rs6000/powerpc-cell32l.xml: Remove. * features/rs6000/powerpc-cell64l.xml: Likewise. * features/rs6000/powerpc-cell32l.c: Remove generated file. * features/rs6000/powerpc-cell64l.c: Likewise. * regformats/rs6000/powerpc-cell32l.dat: Remove generated file. * regformats/rs6000/powerpc-cell64l.dat: Likewise. * regformats/reg-spu.dat: Remove. * target.h (enum target_object): Remove TARGET_OBJECT_SPU. * corelow.c (struct spuid_list): Remove. (add_to_spuid_list): Remove. (core_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * remote.c (PACKET_qXfer_spu_read, PACKET_qXfer_spu_write): Remove. (remote_protocol_features): Remove associated entries. (_initialize_remote): No longer initialize them. (remote_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * linux-nat.c (SPUFS_MAGIC): Remove. (linux_proc_xfer_spu): Remove. (spu_enumerate_spu_ids): Remove. (linux_nat_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * linux-tdep.c (-linux_spu_make_corefile_notes): Remove. (linux_make_corefile_notes): No longer call it. * regcache.c (cooked_read_test): Remove bfd_arch_spu special case. (cooked_write_test): Likewise. gdb/doc/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * doc/gdb.texinfo (Remote Configuration): Remove documentation for qXfer:spu:read and qXfer:spu:write. (General Query Packets): Likewise. (Cell Broadband Engine SPU architecture): Remove subsection. gdb/gdbserver/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * configure.srv (ipa_ppc_linux_regobj): Remove powerpc-cell32l-ipa.o and powerpc-cell64l-ipa.o. (powerpc*-*-linux*): Remove powerpc-cell32l.o and powerpc-cell64l.o from srv_regobj. Remove rs6000/powerpc-cell32l.xml and rs6000/powerpc-cell64l.xml from srv_xmlfiles. (spu*-*-*): Remove. * spu-low.c: Remove file. * linux-ppc-low.c (INSTR_SC, NR_spu_run): Remove. (parse_spufs_run): Remove. (ppc_get_pc): Remove Cell/B.E. support. (ppc_set_pc): Likewise. (ppc_breakpoint_at): Likewise. (ppc_arch_setup): Likewise. (ppc_get_ipa_tdesc_idx): Do not handle tdesc_powerpc_cell64l or tdesc_powerpc_cell32l. (initialize_low_arch): Do not call init_registers_powerpc_cell64l or init_registers_powerpc_cell32l. * linux-ppc-ipa.c (get_ipa_tdesc): Do not handle PPC_TDESC_CELL. (initialize_low_tracepoint): Do not call init_registers_powerpc_cell64l or init_registers_powerpc_cell32l. * linux-ppc-tdesc-init.h (PPC_TDESC_CELL): Mark as unused. (init_registers_powerpc_cell32l): Remove prototype. (init_registers_powerpc_cell64l): Likewise. * target.h (struct target_ops): Remove qxfer_spu member. * server.c (handle_qxfer_spu): Remove. (qxfer_packets): Remove entry for "spu". (handle_query): No longer support qXfer:spu:read or qXfer:spu:write. * linux-low.c (SPUFS_MAGIC): Remove. (spu_enumerate_spu_ids): Remove. (linux_qxfer_spu): Remove. (linux_target_ops): Remove qxfer_spu member. * lynx-low.c (lynx_target_ops): Remove qxfer_spu member. * nto-low.c (nto_target_ops): Remove qxfer_spu member. * win32-low.c (win32_target_ops): Remove qxfer_spu member. gdb/testsuite/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * gdb.arch/spu-info.exp: Remove file. * gdb.arch/spu-info.c: Remove file. * gdb.arch/spu-ls.exp: Remove file. * gdb.arch/spu-ls.c: Remove file. * gdb.asm/asm-source.exp: Remove support for spu*-*-*. * gdb.asm/spu.inc: Remove file. * gdb.base/dump.exp: Remove support for spu*-*-*. * gdb.base/stack-checking.exp: Likewise. * gdb.base/overlays.exp: Likewise. * gdb.base/ovlymgr.c: Likewise. * gdb.base/spu.ld: Remove file. * gdb.cp/bs15503.exp: Remove support for spu*-*-*. * gdb.cp/cpexprs.exp: Likewise. * gdb.cp/exception.exp: Likewise. * gdb.cp/gdb2495.exp: Likewise. * gdb.cp/mb-templates.exp: Likewise. * gdb.cp/pr9167.exp: Likewise. * gdb.cp/userdef.exp: Likewise. * gdb.xml/tdesc-regs.exp: Remove support for spu*-*-*. * gdb.cell: Remove directory. * lib/cell.exp: Remove file.
2019-02-14[gdb, hurd] Work around conflict between Mach's 'thread_info' function, and ↵Thomas Schwinge1-5/+0
GDB's 'thread_info' class In file included from ./nm.h:25:0, from [...]/gdb/defs.h:423, from [...]/gdb/gdb.c:19: [...]/gdb/regcache.h:35:46: warning: 'get_thread_regcache' initialized and declared 'extern' extern struct regcache *get_thread_regcache (thread_info *thread); ^~~~~~~~~~~ [...]/gdb/regcache.h:35:46: error: 'regcache* get_thread_regcache' redeclared as different kind of symbol [...] [...]/gdb/gdbarch.h:1203:69: error: 'thread_info' is not a type extern LONGEST gdbarch_get_syscall_number (struct gdbarch *gdbarch, thread_info *thread); ^~~~~~~~~~~ Fixed with a different (self-contained, more maintainable?) approach compared to what has been done in commit 7aabaf9d4ad52a1df1f551908fbd8cafc5e7597a "Create private_thread_info hierarchy", and commit 75cbc781e371279f4403045be93b07fd8fe7fde5 "gdb: For macOS, s/thread_info/struct thread_info/". We don't want to change all the GDB code to everywhere use 'class thread_info' or 'struct thread_info' instead of plain 'thread_info'. gdb/ * config/i386/nm-i386gnu.h: Don't "#include" any files. * gnu-nat.h (mach_thread_info): New function. * gnu-nat.c (thread_takeover_sc_cmd): Use it.
2019-02-14[gdb, hurd] Remove long obsolete 'gnu_target_pid_to_str' function declarationThomas Schwinge1-2/+0
... for function definition removed/renamed in 1999. ;-) gdb/ * config/i386/nm-i386gnu.h (gnu_target_pid_to_str): Remove.
2019-02-07Normalize include guards in gdbTom Tromey6-15/+20
While working on my other scripts to deal with gdb headers, I noticed that some files were missing include guards. I wrote a script to add the missing ones, but found that using the obvious names for the guards ran into clashes -- for example, gdb/nat/linux-nat.h used "LINUX_NAT_H", but this was also the script's choice for gdb/linux-nat.h. So, I changed the script to normalize all include guards in gdb. This patch is the result. As usual the script is available here: https://github.com/tromey/gdb-refactoring-scripts Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the buildbot. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * yy-remap.h: Add include guard. * xtensa-tdep.h: Add include guard. * xcoffread.h: Rename include guard. * varobj-iter.h: Add include guard. * tui/tui.h: Rename include guard. * tui/tui-winsource.h: Rename include guard. * tui/tui-wingeneral.h: Rename include guard. * tui/tui-windata.h: Rename include guard. * tui/tui-win.h: Rename include guard. * tui/tui-stack.h: Rename include guard. * tui/tui-source.h: Rename include guard. * tui/tui-regs.h: Rename include guard. * tui/tui-out.h: Rename include guard. * tui/tui-layout.h: Rename include guard. * tui/tui-io.h: Rename include guard. * tui/tui-hooks.h: Rename include guard. * tui/tui-file.h: Rename include guard. * tui/tui-disasm.h: Rename include guard. * tui/tui-data.h: Rename include guard. * tui/tui-command.h: Rename include guard. * tic6x-tdep.h: Add include guard. * target/waitstatus.h: Rename include guard. * target/wait.h: Rename include guard. * target/target.h: Rename include guard. * target/resume.h: Rename include guard. * target-float.h: Rename include guard. * stabsread.h: Add include guard. * rs6000-tdep.h: Add include guard. * riscv-fbsd-tdep.h: Add include guard. * regformats/regdef.h: Rename include guard. * record.h: Rename include guard. * python/python.h: Rename include guard. * python/python-internal.h: Rename include guard. * python/py-stopevent.h: Rename include guard. * python/py-ref.h: Rename include guard. * python/py-record.h: Rename include guard. * python/py-record-full.h: Rename include guard. * python/py-record-btrace.h: Rename include guard. * python/py-instruction.h: Rename include guard. * python/py-events.h: Rename include guard. * python/py-event.h: Rename include guard. * procfs.h: Add include guard. * proc-utils.h: Add include guard. * p-lang.h: Add include guard. * or1k-tdep.h: Rename include guard. * observable.h: Rename include guard. * nto-tdep.h: Rename include guard. * nat/x86-linux.h: Rename include guard. * nat/x86-linux-dregs.h: Rename include guard. * nat/x86-gcc-cpuid.h: Add include guard. * nat/x86-dregs.h: Rename include guard. * nat/x86-cpuid.h: Rename include guard. * nat/ppc-linux.h: Rename include guard. * nat/mips-linux-watch.h: Rename include guard. * nat/linux-waitpid.h: Rename include guard. * nat/linux-ptrace.h: Rename include guard. * nat/linux-procfs.h: Rename include guard. * nat/linux-osdata.h: Rename include guard. * nat/linux-nat.h: Rename include guard. * nat/linux-namespaces.h: Rename include guard. * nat/linux-btrace.h: Rename include guard. * nat/glibc_thread_db.h: Rename include guard. * nat/gdb_thread_db.h: Rename include guard. * nat/gdb_ptrace.h: Rename include guard. * nat/fork-inferior.h: Rename include guard. * nat/amd64-linux-siginfo.h: Rename include guard. * nat/aarch64-sve-linux-sigcontext.h: Rename include guard. * nat/aarch64-sve-linux-ptrace.h: Rename include guard. * nat/aarch64-linux.h: Rename include guard. * nat/aarch64-linux-hw-point.h: Rename include guard. * mn10300-tdep.h: Add include guard. * mips-linux-tdep.h: Add include guard. * mi/mi-parse.h: Rename include guard. * mi/mi-out.h: Rename include guard. * mi/mi-main.h: Rename include guard. * mi/mi-interp.h: Rename include guard. * mi/mi-getopt.h: Rename include guard. * mi/mi-console.h: Rename include guard. * mi/mi-common.h: Rename include guard. * mi/mi-cmds.h: Rename include guard. * mi/mi-cmd-break.h: Rename include guard. * m2-lang.h: Add include guard. * location.h: Rename include guard. * linux-record.h: Rename include guard. * linux-nat.h: Add include guard. * linux-fork.h: Add include guard. * i386-darwin-tdep.h: Rename include guard. * hppa-linux-offsets.h: Add include guard. * guile/guile.h: Rename include guard. * guile/guile-internal.h: Rename include guard. * gnu-nat.h: Rename include guard. * gdb-stabs.h: Rename include guard. * frv-tdep.h: Add include guard. * f-lang.h: Add include guard. * event-loop.h: Add include guard. * darwin-nat.h: Rename include guard. * cp-abi.h: Rename include guard. * config/sparc/nm-sol2.h: Rename include guard. * config/nm-nto.h: Rename include guard. * config/nm-linux.h: Add include guard. * config/i386/nm-i386gnu.h: Rename include guard. * config/djgpp/nl_types.h: Rename include guard. * config/djgpp/langinfo.h: Rename include guard. * compile/gcc-cp-plugin.h: Add include guard. * compile/gcc-c-plugin.h: Add include guard. * compile/compile.h: Rename include guard. * compile/compile-object-run.h: Rename include guard. * compile/compile-object-load.h: Rename include guard. * compile/compile-internal.h: Rename include guard. * compile/compile-cplus.h: Rename include guard. * compile/compile-c.h: Rename include guard. * common/xml-utils.h: Rename include guard. * common/x86-xstate.h: Rename include guard. * common/version.h: Rename include guard. * common/vec.h: Rename include guard. * common/tdesc.h: Rename include guard. * common/selftest.h: Rename include guard. * common/scoped_restore.h: Rename include guard. * common/scoped_mmap.h: Rename include guard. * common/scoped_fd.h: Rename include guard. * common/safe-iterator.h: Rename include guard. * common/run-time-clock.h: Rename include guard. * common/refcounted-object.h: Rename include guard. * common/queue.h: Rename include guard. * common/ptid.h: Rename include guard. * common/print-utils.h: Rename include guard. * common/preprocessor.h: Rename include guard. * common/pathstuff.h: Rename include guard. * common/observable.h: Rename include guard. * common/netstuff.h: Rename include guard. * common/job-control.h: Rename include guard. * common/host-defs.h: Rename include guard. * common/gdb_wait.h: Rename include guard. * common/gdb_vecs.h: Rename include guard. * common/gdb_unlinker.h: Rename include guard. * common/gdb_unique_ptr.h: Rename include guard. * common/gdb_tilde_expand.h: Rename include guard. * common/gdb_sys_time.h: Rename include guard. * common/gdb_string_view.h: Rename include guard. * common/gdb_splay_tree.h: Rename include guard. * common/gdb_setjmp.h: Rename include guard. * common/gdb_ref_ptr.h: Rename include guard. * common/gdb_optional.h: Rename include guard. * common/gdb_locale.h: Rename include guard. * common/gdb_assert.h: Rename include guard. * common/filtered-iterator.h: Rename include guard. * common/filestuff.h: Rename include guard. * common/fileio.h: Rename include guard. * common/environ.h: Rename include guard. * common/common-utils.h: Rename include guard. * common/common-types.h: Rename include guard. * common/common-regcache.h: Rename include guard. * common/common-inferior.h: Rename include guard. * common/common-gdbthread.h: Rename include guard. * common/common-exceptions.h: Rename include guard. * common/common-defs.h: Rename include guard. * common/common-debug.h: Rename include guard. * common/cleanups.h: Rename include guard. * common/buffer.h: Rename include guard. * common/btrace-common.h: Rename include guard. * common/break-common.h: Rename include guard. * cli/cli-utils.h: Rename include guard. * cli/cli-style.h: Rename include guard. * cli/cli-setshow.h: Rename include guard. * cli/cli-script.h: Rename include guard. * cli/cli-interp.h: Rename include guard. * cli/cli-decode.h: Rename include guard. * cli/cli-cmds.h: Rename include guard. * charset-list.h: Add include guard. * buildsym-legacy.h: Rename include guard. * bfin-tdep.h: Add include guard. * ax.h: Rename include guard. * arm-linux-tdep.h: Add include guard. * arm-fbsd-tdep.h: Add include guard. * arch/xtensa.h: Rename include guard. * arch/tic6x.h: Add include guard. * arch/i386.h: Add include guard. * arch/arm.h: Rename include guard. * arch/arm-linux.h: Rename include guard. * arch/arm-get-next-pcs.h: Rename include guard. * arch/amd64.h: Add include guard. * arch/aarch64-insn.h: Rename include guard. * arch-utils.h: Rename include guard. * annotate.h: Add include guard. * amd64-darwin-tdep.h: Rename include guard. * aarch64-linux-tdep.h: Add include guard. * aarch64-fbsd-tdep.h: Add include guard. * aarch32-linux-nat.h: Add include guard. gdb/gdbserver/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * x86-tdesc.h: Rename include guard. * x86-low.h: Add include guard. * wincecompat.h: Rename include guard. * win32-low.h: Add include guard. * utils.h: Rename include guard. * tracepoint.h: Rename include guard. * tdesc.h: Rename include guard. * target.h: Rename include guard. * server.h: Rename include guard. * remote-utils.h: Rename include guard. * regcache.h: Rename include guard. * nto-low.h: Rename include guard. * notif.h: Add include guard. * mem-break.h: Rename include guard. * lynx-low.h: Add include guard. * linux-x86-tdesc.h: Add include guard. * linux-s390-tdesc.h: Add include guard. * linux-ppc-tdesc-init.h: Add include guard. * linux-low.h: Add include guard. * linux-aarch64-tdesc.h: Add include guard. * linux-aarch32-low.h: Add include guard. * inferiors.h: Rename include guard. * i387-fp.h: Rename include guard. * hostio.h: Rename include guard. * gdbthread.h: Rename include guard. * gdb_proc_service.h: Rename include guard. * event-loop.h: Rename include guard. * dll.h: Rename include guard. * debug.h: Rename include guard. * ax.h: Rename include guard.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker8-8/+8
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2019-01-01rotate gdb/ChangeLogJoel Brobecker1-0/+1
2018-12-27Remove empty nm-fbsd.h header for FreeBSD/i386 native target.John Baldwin1-23/+0
gdb/ChangeLog: * config/i386/nm-fbsd.h: Remove file. * Makefile.in (HFILES_NO_SRCDIR): Remove config/i386/nm-fbsd.h. * configure.nat: Remove NAT_FILE for FreeBSD/i386.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker9-9/+9
gdb/ChangeLog: Update copyright year range in all GDB files
2018-01-02Yearly rotation of the gdb/ChangeLog fileJoel Brobecker1-0/+1
gdb/ChangeLog * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2017.
2017-09-06Correct shell compatibility issue detected with pkgsrc.Kamil Rytarowski1-1/+1
String comparison of in a POSIX bourne shell must be done with '=', not '=='. For example the NetBSD sh(1) does not support it. gdb/ChangeLog 2017-09-06 Kamil Rytarowski <n54@gmx.com> * config/djgpp/djconfig.sh: Correct shell portability issue.
2017-05-06Introduce "gdb/configure.nat" (and delete "gdb/config/*/*.mh" files)Sergio Durigan Junior56-441/+0
Due to my ongoing work to make it possible for gdbserver to start the inferior using the shell, I had to share the fork_inferior function under the "nat/" directory. In order to do that, I created a new file and put the function there; however, this meant that I now had to update some of the *.mh files (under "gdb/config") and add the new file as a dependency to be built natively. Bleh... After talking a bit to Pedro about this, the idea came up to write a new "gdb/configure.nat" file, a la "gdb/configure.tgt", which would concentrate all of the native settings for each host/system. I decided to tackle this issue. The patch is simple. All of the previous Makefile variables that were being declared inside the *.mh files are now inside "gdb/Makefile.in", and "gdb/configure" is responsible for AC_SUBST'ing them. The definitions of these variables were put inside "gdb/configure.nat", so now they're shell variables. For excerpts of Makefile code, one must create a file under "gdb/config/${gdb_cpu_host}" and reference it on the "nat_extra_makefile_frag" variable. It should now be easier to update the native dependencies of hosts in this single file. This has been tested on x86_64 without regressions. gdb/ChangeLog: 2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in: Remove "@host_makefile_frag@". Add variables NAT_FILE, NATDEPFILES, NAT_CDEPS, LOADLIBES, MH_CFLAGS, XM_CLIBS, NAT_GENERATED_FILES, HAVE_NATIVE_GCORE_HOST. Add "@nat_extra_makefile_frag@". (Makefile): Remove dependency on "@frags@". ($(GNULIB_BUILDDIR)/Makefile): Likewise. (data-directory/Makefile): Likewise. * config/aarch64/linux.mh: Deleted; moved contents to "gdb/configure.nat". * config/alpha/alpha-linux.mh: Likewise. * config/alpha/nbsd.mh: Likewise. * config/arm/linux.mh: Likewise. * config/arm/nbsdelf.mh: Likewise. * config/i386/cygwin.mh: Likewise. * config/i386/cygwin64.mh: Likewise. * config/i386/darwin.mh: Likewise. * config/i386/fbsd.mh: Likewise. * config/i386/fbsd64.mh: Likewise. * config/i386/go32.mh: Likewise. * config/i386/i386gnu.mh: Likewise. * config/i386/i386sol2.mh: Likewise. * config/i386/linux.mh: Likewise. * config/i386/linux64.mh: Likewise. * config/i386/mingw.mh: Likewise. * config/i386/mingw64.mh: Likewise. * config/i386/nbsd64.mh: Likewise. * config/i386/nbsdelf.mh: Likewise. * config/i386/nto.mh: Likewise. * config/i386/obsd.mh: Likewise. * config/i386/obsd64.mh: Likewise. * config/i386/sol2-64.mh: Likewise. * config/ia64/linux.mh: Likewise. * config/m32r/linux.mh: Likewise. * config/m68k/linux.mh: Likewise. * config/m68k/nbsdelf.mh: Likewise. * config/m68k/obsd.mh: Likewise. * config/m88k/obsd.mh: Likewise. * config/mips/fbsd.mh: Likewise. * config/mips/linux.mh: Likewise. * config/mips/nbsd.mh: Likewise. * config/mips/obsd64.mh: Likewise. * config/pa/linux.mh: Likewise. * config/pa/nbsd.mh: Likewise. * config/pa/obsd.mh: Likewise. * config/powerpc/aix.mh: Likewise. * config/powerpc/fbsd.mh: Likewise. * config/powerpc/linux.mh: Likewise. * config/powerpc/nbsd.mh: Likewise. * config/powerpc/obsd.mh: Likewise. * config/powerpc/ppc64-linux.mh: Likewise. * config/powerpc/spu-linux.mh: Likewise. * config/s390/linux.mh: Likewise. * config/sh/nbsd.mh: Likewise. * config/sparc/fbsd.mh: Likewise. * config/sparc/linux.mh: Likewise. * config/sparc/linux64.mh: Likewise. * config/sparc/nbsd64.mh: Likewise. * config/sparc/nbsdelf.mh: Likewise. * config/sparc/obsd64.mh: Likewise. * config/sparc/sol2.mh: Likewise. * config/tilegx/linux.mh: Likewise. * config/vax/nbsdelf.mh: Likewise. * config/vax/obsd.mh: Likewise. * config/xtensa/linux.mh: Likewise. * config/i386/i386gnu.mn: New file, with excerpts from "config/i386/i386gnu.mh". * configure: Regenerate. * configure.ac: Rewrite code to use "gdb/configure.nat" instead of *.mh files under "gdb/config". * configure.nat: New file, with contents from the "gdb/config/*/*.mh" files. gdb/doc/ChangeLog: 2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile: Remove "@host_makefile_frag@".
2017-04-04Remove support for FreeBSD/alpha.John Baldwin1-6/+0
FreeBSD last shipped a release for Alpha (6.3) in 2008. This also removes support for GNU/kFreeBSD on Alpha. gdb/ChangeLog: * Makefile.in (ALL_64_TARGET_OBS): Remove alpha-fbsd-tdep.o. (ALLDEPFILES): Remove alpha-fbsd-tdep.c * NEWS: Mention that support for FreeBSD/alpha was removed. * alpha-fbsd-tdep.c: Delete file. * config/alpha/fbsd.mh: Delete file. * configure.host: Delete alpha*-*-freebsd* and alpha*-*-kfreebsd*-gnu. * configure.tgt: Delete alpha*-*-freebsd* and alpha*-*-kfreebsd*-gnu.
2017-03-07Remove use of the no longer needed -mminimal-toc option.Peter Bergner1-6/+0
* config/powerpc/ppc64-linux.mh (MH_CFLAGS): Delete.
2017-01-04Add native target for FreeBSD/mips.John Baldwin1-0/+3
This supports the o32 and n64 ABIs. gdb/ChangeLog: * Makefile.in (ALLDEPFILES): Add mips-fbsd-nat.c. * NEWS: Mention new FreeBSD/mips native configuration. * config/mips/fbsd.mh: New file. * configure.host: Add mips*-*-freebsd*. * mips-fbsd-nat.c: New file.
2017-01-01update copyright year range in GDB filesJoel Brobecker12-12/+12
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2017-01-01Rotate GDB main ChangeLog for 2017Joel Brobecker1-0/+1
This patch rotates the GDB main ChangeLog file as per our "Start of New Year Procedure". 2017-01-01 Joel Brobecker <brobecker@adacore.com> * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2016.
2016-12-08Hurd, C++: Mach/Hurd headers and MIG stubs are not yet fit for C++Thomas Schwinge1-0/+3
..., so handle these in "C" mode still: gdb/ * config/i386/i386gnu.mh (%_S.o %_U.o): Add "-x c" to "COMPILE.post". * gnu-nat.c: #include Mach/Hurd headers before all others. Wrap Mach/Hurd headers and MIG stubs' prototypes in 'extern "C"'. * i386-gnu-nat.c: Likewise.
2016-11-23Normalize names of some source filesSimon Marchi31-80/+80
Most tdep/nat files are named: <cpu>-<os>-tdep.c <cpu>-<os>-nat.c A few files do not respect this scheme. This patch renames them so that they are consistent with the rest of the files. It builds fine with --enable-targets=all, but that doesn't test the nat files. I can only hope that my grep skill is good enough. gdb/ChangeLog: * Makefile.in (ALL_64_TARGET_OBS, ALL_TARGET_OBS, HFILES_NO_SRCDIR, ALLDEPFILES): Rename files. * alphabsd-nat.c: Rename to ... * alpha-bsd-nat.c: ... this, adjust include. * alphabsd-tdep.c: Rename to ... * alpha-bsd-tdep.c: ... this, adjust include. * alphabsd-tdep.h: Rename to ... * alpha-bsd-tdep.h: ... this, adjust include barrier and comment. * alphafbsd-tdep.c: Rename to ... * alpha-fbsd-tdep.c: ... this. * alphanbsd-tdep.c: Rename to ... * alpha-nbsd-tdep.c: ... this, adjust include. * alphaobsd-tdep.c: Rename to ... * alpha-obsd-tdep.c: ... this, adjust include. * amd64bsd-nat.c: Rename to ... * amd64-bsd-nat.c: ... this, adjust include. * amd64fbsd-nat.c: Rename to ... * amd64-fbsd-nat.c: ... this, adjust include. * amd64fbsd-tdep.c: Rename to ... * amd64-fbsd-tdep.c: ... this, adjust include. * amd64nbsd-nat.c: Rename to ... * amd64-nbsd-nat.c: ... this. * amd64nbsd-tdep.c: Rename to ... * amd64-nbsd-tdep.c: ... this. * amd64obsd-nat.c: Rename to ... * amd64-obsd-nat.c: ... this. * amd64obsd-tdep.c: Rename to ... * amd64-obsd-tdep.c: ... this. * amd64-tdep.h: Update comments. * armbsd-tdep.c: Rename to ... * arm-bsd-tdep.c: ... this. * armnbsd-nat.c: Rename to ... * arm-nbsd-nat.c: ... this. * armnbsd-tdep.c: Rename to ... * arm-nbsd-tdep.c: ... this. * armobsd-tdep.c: Rename to ... * arm-obsd-tdep.c: ... this. * arm-tdep.h: Update comments. * hppabsd-tdep.c: Rename to ... * hppa-bsd-tdep.c: ... this, adjust include. * hppabsd-tdep.h: Rename to ... * hppa-bsd-tdep.h: ... this, adjust include barrier and comment. * hppanbsd-nat.c: Rename to ... * hppa-nbsd-nat.c: ... this. * hppanbsd-tdep.c: Rename to ... * hppa-nbsd-tdep.c: ... this, adjust include. * hppaobsd-nat.c: Rename to ... * hppa-obsd-nat.c: ... this. * hppaobsd-tdep.c: Rename to ... * hppa-obsd-tdep.c: ... this, adjust include. * i386bsd-nat.c: Rename to ... * i386-bsd-nat.c: ... this, adjust include. * i386bsd-nat.h: Rename to ... * i386-bsd-nat.h: ... this, adjust include barrier and comment. * i386bsd-tdep.c: Rename to ... * i386-bsd-tdep.c: ... this. * i386fbsd-nat.c: Rename to ... * i386-fbsd-nat.c: ... this, adjust include. * i386fbsd-tdep.c: Rename to ... * i386-fbsd-tdep.c: ... this, adjust include. * i386fbsd-tdep.h: Rename to ... * i386-fbsd-tdep.h: ... this, adjust include barrier and comment. * i386gnu-nat.c: Rename to ... * i386-gnu-nat.c: ... this. * i386gnu-tdep.c: Rename to ... * i386-gnu-tdep.c: ... this. * i386nbsd-nat.c: Rename to ... * i386-nbsd-nat.c: ... this, adjust include. * i386nbsd-tdep.c: Rename to ... * i386-nbsd-tdep.c: ... this. * i386obsd-nat.c: Rename to ... * i386-obsd-nat.c: ... this, adjust include. * i386obsd-tdep.c: Rename to ... * i386-obsd-tdep.c: ... this. * i386v4-nat.c: Rename to ... * i386-v4-nat.c: ... this. * i386-tdep.h: Update comments. * m68k-tdep.h: Update comments. * m68kbsd-nat.c: Rename to ... * m68k-bsd-nat.c: ... this. * m68kbsd-tdep.c: Rename to ... * m68k-bsd-tdep.c: ... this. * m68klinux-nat.c: Rename to ... * m68k-linux-nat.c: ... this. * m68klinux-tdep.c: Rename to ... * m68k-linux-tdep.c: ... this. * m88kbsd-nat.c: Rename to ... * m88k-bsd-nat.c: ... this. * mipsnbsd-nat.c: Rename to ... * mips-nbsd-nat.c: ... this, adjust include. * mipsnbsd-tdep.c: Rename to ... * mips-nbsd-tdep.c: ... this, adjust include. * mipsnbsd-tdep.h: Rename to ... * mips-nbsd-tdep.h: ... this, adjust include barrier and comment. * mips64obsd-nat.c: Rename to ... * mips64-obsd-nat.c: ... this. * mips64obsd-tdep.c: Rename to ... * mips64-obsd-tdep.c: ... this. * ppcfbsd-nat.c: Rename to ... * ppc-fbsd-nat.c: ... this, adjust include. * ppcfbsd-tdep.c: Rename to ... * ppc-fbsd-tdep.c: ... this, adjust include. * ppcfbsd-tdep.h: Rename to ... * ppc-fbsd-tdep.h: ... this, adjust include barrier and comment. * ppcnbsd-nat.c: Rename to ... * ppc-nbsd-nat.c: ... this, adjust include. * ppcnbsd-tdep.c: Rename to ... * ppc-nbsd-tdep.c: ... this, adjust include. * ppcnbsd-tdep.h: Rename to ... * ppc-nbsd-tdep.h: ... this, adjust include barrier and comment. * ppcobsd-nat.c: Rename to ... * ppc-obsd-nat.c: ... this, adjust include. * ppcobsd-tdep.c: Rename to ... * ppc-obsd-tdep.c: ... this, adjust include. * ppcobsd-tdep.h: Rename to ... * ppc-obsd-tdep.h: ... this, adjust include barrier and comment. * shnbsd-nat.c: Rename to ... * sh-nbsd-nat.c: ... this. * shnbsd-tdep.c: Rename to ... * sh-nbsd-tdep.c: ... this. * sparcnbsd-nat.c: Rename to ... * sparc-nbsd-nat.c: ... this. * sparcnbsd-tdep.c: Rename to ... * sparc-nbsd-tdep.c: ... this. * sparcobsd-tdep.c: Rename to ... * sparc-obsd-tdep.c: ... this. * sparc64fbsd-nat.c: Rename to ... * sparc64-fbsd-nat.c: ... this. * sparc64fbsd-tdep.c: Rename to ... * sparc64-fbsd-tdep.c: ... this. * sparc64nbsd-nat.c: Rename to ... * sparc64-nbsd-nat.c: ... this. * sparc64nbsd-tdep.c: Rename to ... * sparc64-nbsd-tdep.c: ... this. * sparc64obsd-nat.c: Rename to ... * sparc64-obsd-nat.c: ... this. * sparc64obsd-tdep.c: Rename to ... * sparc64-obsd-tdep.c: ... this. * sparc64-tdep.h: Update comments. * vaxbsd-nat.c: Rename to ... * vax-bsd-nat.c: ... this. * vaxnbsd-tdep.c: Rename to ... * vax-nbsd-tdep.c: ... this. * vaxobsd-tdep.c: Rename to ... * vax-obsd-tdep.c: ... this. * x86bsd-nat.h: Rename to ... * x86-bsd-nat.h: ... this, adjust include barrier and comment. * x86bsd-nat.c: Rename to ... * x86-bsd-nat.c: ... this, adjust include. * configure.tgt: Update renamed files. * config/alpha/fbsd.mh: Update renamed files. * config/alpha/nbsd.mh: Update renamed files. * config/arm/nbsdelf.mh: Update renamed files. * config/djgpp/fnchange.lst: Update renamed files. * config/i386/fbsd.mh: Update renamed files. * config/i386/fbsd64.mh: Update renamed files. * config/i386/i386gnu.mh: Update renamed files. * config/i386/i386sol2.mh: Update renamed files. * config/i386/nbsd64.mh: Update renamed files. * config/i386/nbsdelf.mh: Update renamed files. * config/i386/obsd.mh: Update renamed files. * config/i386/obsd64.mh: Update renamed files. * config/i386/sol2-64.mh: Update renamed files. * config/m68k/linux.mh: Update renamed files. * config/m68k/nbsdelf.mh: Update renamed files. * config/m68k/obsd.mh: Update renamed files. * config/m88k/obsd.mh: Update renamed files. * config/mips/nbsd.mh: Update renamed files. * config/mips/obsd64.mh: Update renamed files. * config/pa/nbsd.mh: Update renamed files. * config/pa/obsd.mh: Update renamed files. * config/powerpc/fbsd.mh: Update renamed files. * config/powerpc/nbsd.mh: Update renamed files. * config/powerpc/obsd.mh: Update renamed files. * config/sh/nbsd.mh: Update renamed files. * config/sparc/fbsd.mh: Update renamed files. * config/sparc/nbsd64.mh: Update renamed files. * config/sparc/nbsdelf.mh: Update renamed files. * config/sparc/obsd64.mh: Update renamed files. * config/vax/nbsdelf.mh: Update renamed files. * config/vax/obsd.mh: Update renamed files.
2016-07-01Consolidate x86 debug register code for BSD native targets.John Baldwin6-7/+7
Move the debug register support code from amd64bsd-nat.c and i386bsd-nat.c into a shared x86bsd-nat.c. Instead of setting up x86_dr_low in amd64fbsd-nat.c and i386fbsd-nat.c, add a x86bsd_target function that creates a new target that inherits from inf_ptrace and sets up x86 debug registers if supported. In addition to initializing x86_dr_low, the x86bsd target installs a custom mourn_inferior target operation to clean up the x86 debug register state. Previously this was only done on amd64. Now it will be done for both i386 and amd64. The i386bsd_target and amd64bsd_target functions create targets that inherit from x86bsd rather than inf_ptrace. gdb/ChangeLog: * Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with 'x86bsd-nat.h'. * amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of 'amd64bsd-nat.h'. (amd64bsd_xsave_len): Rename and move to x86bsd-nat.c. (amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len' with 'x86bsd_xsave_len'. (amd64bsd_store_inferior_registers): Likewise. (amd64bsd_target): Inherit from x86bsd_target. (amd64bsd_dr_get): Rename and move to x86bsd-nat.c. (amd64bsd_dr_set): Likewise. (amd64bsd_dr_set_control): Likewise. (amd64bsd_dr_set_addr): Likewise. (amd64bsd_dr_get_addr): Likewise. (amd64bsd_dr_get_status): Likewise. (amd64bsd_dr_get_control): Likewise. * amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of 'amd64bsd-nat.h'. (super_mourn_inferior): Move to x86bsd-nat.c. (amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c. (amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with 'x86bsd_xsave_len'. (_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and mourn_inferior' target op. * config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o. * config/i386/fbsd64.mh: Likewise. * config/i386/nbsd64.mh: Likewise. * config/i386/nbsdelf.mh: Likewise. * config/i386/obsd.mh: Likewise. * config/i386/obsd64.mh: Likewise. * i386bsd-nat.c: Include 'x86bsd-nat.h'. (i386bsd_xsave_len): Rename and move to x86bsd-nat.c. (i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len' with 'x86bsd_xsave_len'. (i386bsd_store_inferior_registers): Likewise. (i386bsd_target): Inherit from x86bsd_target. (i386bsd_dr_get): Rename and move to x86bsd-nat.c. (i386bsd_dr_set): Likewise. (i386bsd_dr_set_control): Likewise. (i386bsd_dr_set_addr): Likewise. (i386bsd_dr_get_addr): Likewise. (i386bsd_dr_get_status): Likewise. (i386bsd_dr_get_control): Likewise. * i386bsd-nat.h (i386bsd_xsave_len): Remove. (i386bsd_dr_set_control): Remove. (i386bsd_dr_set_addr): Remove. (i386bsd_dr_get_addr): Remove. (i386bsd_dr_get_status): Remove. (i386bsd_dr_get_control): Remove. * i386fbsd-nat.c: Include 'x86bsd-nat.h'. (i386fbsd_read_description): Replace 'i386bsd_xsave_len' with 'x86bsd_xsave_len'. (_initialize_i386fbsd_nat): Remove x86 watchpoint setup and mourn_inferior' target op. * x86bsd-nat.c: New file. * x86bsd-nat.h: New file.
2016-02-02Merge gdb and gdbserver implementations for siginfoWalfred Tedeschi1-1/+1
Extract the compatible siginfo handling from amd64-linux-nat.c and gdbserver/linux-x86-low to a new file nat/amd64-linux-siginfo.c. 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com> gdb/ChangeLog: * nat/amd64-linux-siginfo.c: New file. * nat/amd64-linux-siginfo.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h. (amd64-linux-siginfo.o): New rule. * config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o. * amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include. (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo) (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo) (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid) (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status) (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band) (cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c. gdb/gdbserver/ChangeLog: * configure.srv (x86_64-*-linux*): Add amd64-linux-siginfo.o to srv_tgtobj. (i[34567]86-*-linux*): Add amd64-linux-siginfo.o to srv_tgtobj. * linux-x86-low.c [__x86_64__]: Include "nat/amd64-linux-siginfo.h". (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo) (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo) (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid) (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status) (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band) (cpt_si_fd, si_timerid, si_overrun): Move from nat/amd64-linux-siginfo.c. * Makefile.in (amd64-linux-siginfo.o:): New rule.
2016-01-21Fix regression introduced in "break *<EXPR>" by explicit location patches.Joel Brobecker1-0/+2
A relatively recent patch support for explicit locations, and part of that patch cleaned up the way we parse breakpoint locations. Unfortunatly, a small regression crept in for "*<EXPR>" breakpoint locations. In particular, on PIE programs, one can see the issue by doing the following, with any program: (gdb) b *main Breakpoint 1 at 0x51a: file hello.c, line 3. (gdb) run Starting program: /[...]/hello Error in re-setting breakpoint 1: Warning: Cannot insert breakpoint 1. Cannot access memory at address 0x51a Warning: Cannot insert breakpoint 1. Cannot access memory at address 0x51a Just for the record, this regression was introduced by: commit a06efdd6effd149a1d392df8d62824e44872003a Date: Tue Aug 11 17:09:35 2015 -0700 Subject: Explicit locations: introduce address locations What happens is that the patch makes the implicit assumption that the address computed the first time is static, as if it was designed to only support litteral expressions (Eg. "*0x1234"). This allows the shortcut of not re-computing the breakpoint location's address when re-setting breakpoints. However, this does not work in general, as demonstrated in the example above. This patch plugs that hole simply by saving the original expression used to compute the address as part of the address location, so as to then re-evaluate that expression during breakpoint re-set. gdb/ChangeLog: * location.h (new_address_location): Add new parameters "addr_string" and "addr_string_len". (get_address_string_location): Add declaration. * location.c (new_address_location): Add new parameters "addr_string" and "addr_string_len". If not NULL, store a copy of the addr_string in the new location as well. (get_address_string_location): New function. (string_to_event_location): Update call to new_address_location. * linespec.c (event_location_to_sals) <ADDRESS_LOCATION>: Save the event location in the parser's state before passing it to convert_address_location_to_sals. * breakpoint.c (create_thread_event_breakpoint): Update call to new_address_location. (init_breakpoint_sal): Get the event location's string, if any, and use it to update call to new_address_location. * python/py-finishbreakpoint.c (bpfinishpy_init): Update call to new_address_location. * spu-tdep.c (spu_catch_start): Likewise. * config/djgpp/fnchange.lst: Add entries for gdb/testsuite/gdb.base/break-fun-addr1.c and gdb/testsuite/gdb.base/break-fun-addr2.c. gdb/testsuite/ChangeLog: * gdb.base/break-fun-addr.exp: New file. * gdb.base/break-fun-addr1.c: New file. * gdb.base/break-fun-addr2.c: New file.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker12-12/+12
gdb/ChangeLog: Update year range in copyright notice of all files.
2016-01-01Rotate the GDB ChangeLogJoel Brobecker1-0/+1
Per GDB the "Start of New Year Procedure", this patch - renames the current ChangeLog into ChangeLog-2015; - starts a new ChangeLog file. gdb/ChangeLog: * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.
2015-08-25Move aarch64_linux_prepare_to_resume to nat/aarch64-linux.cYao Qi1-1/+2
gdb: 2015-08-25 Yao Qi <yao.qi@linaro.org> * Makefile.in (aarch64-liunx.o): New rule. (HFILES_NO_SRCDIR): Add aarch64-linux.h. * config/aarch64/linux.mh (NAT_FILE): Add aarch64-linux.o. * aarch64-linux-nat.c: Include nat/aarch64-linux.h. * aarch64-linux-nat.c (aarch64_get_debug_reg_state): Make it extern. (aarch64_linux_prepare_to_resume): Move it nat/aarch64-linux.c. * nat/aarch64-linux-hw-point.h (aarch64_debug_reg_state): Declare * nat/aarch64-linux.c: New file. * nat/aarch64-linux.h: New file. gdb/gdbserver: 2015-08-25 Yao Qi <yao.qi@linaro.org> * Makefile.in (aarch64-linux.o): New rule. * configure.srv (aarch64*-*-linux*): Append aarch64-linux.o to srv_tgtobj. * linux-aarch64-low.c: Include nat/aarch64-linux.h. (aarch64_init_debug_reg_state): Make it extern. (aarch64_linux_prepare_to_resume): Remove.
2015-07-17Move common aarch64 HW breakpoint/watchpoint code to nat/Yao Qi1-1/+1
When I look at test fails related to watchpoint on aarch64-linux, I find there are some code duplicates between GDB and GDBserver. This patch is to move some of them to a nat/aarch64-linux-hw-point.{h,c}. The only change I do is about the dr_changed_t typedef, which was ULONGEST in GDB and 'unsigned long long' in GDBserver. Each bit of dr_changed_t represents a status of each HW breakpoint or watchpoint register, and the max number of HW breakpoint or watchpoint registers is 16, so the width of 'unsigned long long' is sufficient. gdb: 2015-07-17 Yao Qi <yao.qi@linaro.org> * Makefile.in (HFILES_NO_SRCDIR): Add nat/aarch64-linux-hw-point.h. (aarch64-linux-hw-point.o): New rule. * nat/aarch64-linux-hw-point.h: New file. * nat/aarch64-linux-hw-point.c: New file. * aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h. (AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h. (AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise. (AARCH64_HWP_ALIGNMENT): Likewise. (AARCH64_HWP_MAX_LEN_PER_REG): Likewise. (AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise. (AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise. (DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise. (DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise. (aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise. (struct aarch64_debug_reg_state): Likewise. (struct arch_lwp_info): Likewise. (aarch64_linux_set_debug_regs): Likewise. (aarch64_notify_debug_reg_change): Remove static. (aarch64_align_watchpoint): Likewise. (DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise. (aarch64_watchpoint_length): Likewise. (aarch64_point_encode_ctrl_reg): Likewise (aarch64_point_is_aligned): Likewise. (aarch64_dr_state_insert_one_point): Likewise. (aarch64_dr_state_remove_one_point): Likewise. (aarch64_handle_breakpoint): Likewise. (aarch64_handle_aligned_watchpoint): Likewise. (aarch64_handle_unaligned_watchpoint): Likewise. (aarch64_handle_watchpoint): Likewise. * config/aarch64/linux.mh (NAT_FILE): Add aarch64-linux-hw-point.o. gdb/gdbserver: 2015-07-17 Yao Qi <yao.qi@linaro.org> * Makefile.in (aarch64-linux-hw-point.o): New rule. * configure.srv (srv_tgtobj): Append aarch64-linux-hw-point.o. * linux-aarch64-low.c: Include nat/aarch64-linux-hw-point.h. (AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h. (AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise. (AARCH64_HWP_ALIGNMENT): Likewise. (AARCH64_HWP_MAX_LEN_PER_REG): Likewise. (AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise. (aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise. (AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise. (DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise. (DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise. (struct aarch64_debug_reg_state): Likewise. (struct arch_lwp_info): Likewise. (aarch64_align_watchpoint): Likewise. (DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise. (aarch64_watchpoint_length): Likewise. (aarch64_point_encode_ctrl_reg): Likewise (aarch64_point_is_aligned): Likewise. (aarch64_align_watchpoint): Likewise. (aarch64_linux_set_debug_regs): (aarch64_dr_state_insert_one_point): Likewise. (aarch64_dr_state_remove_one_point): Likewise. (aarch64_handle_breakpoint): Likewise. (aarch64_handle_aligned_watchpoint): Likewise. (aarch64_handle_unaligned_watchpoint): Likewise. (aarch64_handle_watchpoint): Likewise.
2015-07-15Revert the previous 7 commits of: Validate binary before useJan Kratochvil2-2/+2
ddc98fbf2fd9e244a215a4d09e559180dc573a14 Create empty nat/linux-maps.[ch] and common/target-utils.[ch] 6e5b4429db0d66e2d0b27e1bcfe4709f3dae73ed Move gdb_regex* to common/ f7af1fcd759fa126612018a5916cf808df7bb8bc Prepare linux_find_memory_regions_full & co. for move 9904185cfde13d6c6849f1f042c8e3b74974cf08 Move linux_find_memory_regions_full & co. 700ca40f6fc1addd7238f4ab57f76c095ad3c99f gdbserver build-id attribute generator ca5268b6be265580b91ef75c1a1a9815f581ae42 Validate symbol file using build-id 0a94970d663a053c523f23ac0d71deb25a77f709 Tests for validate symbol file using build-id gdb/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 6 commits: Create empty nat/linux-maps.[ch] and common/target-utils.[ch]. Move gdb_regex* to common/ Prepare linux_find_memory_regions_full & co. for move Move linux_find_memory_regions_full & co. gdbserver build-id attribute generator Validate symbol file using build-id gdb/gdbserver/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 3 commits: Move gdb_regex* to common/ Move linux_find_memory_regions_full & co. gdbserver build-id attribute generator gdb/doc/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 2 commits: gdbserver build-id attribute generator Validate symbol file using build-id gdb/testsuite/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous commit: Tests for validate symbol file using build-id.
2015-07-15Create empty nat/linux-maps.[ch] and common/target-utils.[ch]Jan Kratochvil2-2/+2
Prepare new files for later move. gdb/ChangeLog 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com Jan Kratochvil <jan.kratochvil@redhat.com> Create empty nat/linux-maps.[ch] and common/target-utils.[ch]. * Makefile.in (HFILES_NO_SRCDIR); Add nat/linux-maps.h, common/target-utils.h. (COMMON_OBS): Add target-utils.o. (linux-maps.o, target-utils.o): New. * target/target-utils.c: New file. * target/target-utils.h: New file. * config/i386/linux.mh (NATDEPFILES): Add linux-maps.o. * config/i386/linux64.mh (NATDEPFILES): Ditto. * nat/linux-maps.c: New file. * nat/linux-maps.h: New file. gdb/gdbserver/ChangeLog 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com Jan Kratochvil <jan.kratochvil@redhat.com> Create empty nat/linux-maps.[ch] and common/target-utils.[ch]. * Makefile.in (OBS): Add target-utils.o. (linux-maps.o, target-utils.o): New. * configure.srv (srv_linux_obj): Add linux-maps.o.
2015-07-07Native debug arm program by aarch64 GDBYao Qi1-1/+1
This patch is to let aarch64 GDB debug 32-bit arm program natively. In each function for fetching and storing registers, GDB will check gdbarch_bfd_arch_info (gdbarch)->bits_per_word, if it is 32, call the corresponding aarch32 functions in aarch32-linux-nat.c, otherwise fall back to aarch64 code to fetch and store registers. aarch64_linux_read_description has to return the right target description, but we don't have gdbarch available there, so GDB fetches auxv and gets AT_PHENT, in order to determine whether the target is 32-bit or 64-bit. I learned this trick from solib-svr4.c. gdb: 2015-07-07 Yao Qi <yao.qi@linaro.org> * aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from arm-linux-nat.c. * aarch64-linux-nat.c: Include aarch32-linux-nat.h and elf/external.h. (fetch_gregs_from_thread): Call aarch32_gp_regcache_supply if target is 32-bit. (store_gregs_to_thread): Call aarch32_gp_regcache_collect if target is 32-bit. (fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply if target is 32-bit. (store_fpregs_to_thread): Call aarch32_vfp_regcache_collect if target is 32-bit. (tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (aarch64_linux_read_description): Return the right target description. * arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h. * config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o. * configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and arm-linux-tdep.o
2015-07-07New aarch32-linux-nat.cYao Qi1-1/+1
This patch is to move all the code about transferring regcache <-> byte buffer for arm (aarch32) to a separate file aarch32-linux-nat.c. Then, in the following patch, aarch64 code can use it to do multi-arch debugging. This is a refactory patch. gdb: 2015-07-07 Yao Qi <yao.qi@linaro.org> * aarch32-linux-nat.c: New file. * aarch32-linux-nat.h: New file. * arm-linux-nat.c: Include aarch32-linux-nat.h. (fetch_regs): Move code to aarch32-linux-nat.c. Call aarch32_gp_regcache_supply. (store_regs): Move code to aarch32-linux-nat.c. Call aarch32_gp_regcache_collect. (fetch_vfp_regs): Move code to aarch32-linux-nat.c. Call aarch32_vfp_regcache_supply. (store_vfp_regs): Move code to aarch32-linux-nat.c. Call aarch32_vfp_regcache_collect. * config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
2015-06-10Introduce nat/linux-namespaces.[ch]Gary Benson18-19/+21
This commit introduces new shared files nat/linux-namespaces.[ch] containing code to support Linux namespaces that will be used by both GDB and gdbserver. gdb/ChangeLog: * configure.ac (AC_CHECK_FUNCS): Add setns. * config.in: Regenerate. * configure: Likewise. * nat/linux-namespaces.h: New file. * nat/linux-namespaces.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h. (linux-namespaces.o): New rule. * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise. * config/powerpc/linux.mh (NATDEPFILES): Likewise. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/s390/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. gdb/gdbserver/ChangeLog: * configure.ac (AC_CHECK_FUNCS): Add setns. * config.in: Regenerate. * configure: Likewise. * Makefile.in (SFILES): Add nat/linux-namespaces.c. (linux-namespaces.o): New rule. * configure.srv (srv_linux_obj): Add linux-namespaces.o.
2015-03-24Move low-level Linux x86 debug register code to a shared fileGary Benson2-2/+4
This commit moves the now-identical low-level Linux x86 debug register code from gdb/x86-linux-nat.c and gdb/gdbserver/linux-x86-low.c into a new shared file gdb/nat/x86-linux-dregs.c. gdb/ChangeLog: * nat/x86-linux-dregs.h: New file. * nat/x86-linux-dregs.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h. (x86-linux-dregs.o): New rule. * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o. * config/i386/linux64.mh (NATDEPFILES): Likewise. * x86-linux-nat.c: Include nat/x86-linux-dregs.h. (u_debugreg_offset): Moved to nat/x86-linux-dregs.c. (x86_linux_dr_get): Likewise. (x86_linux_dr_set): Likewise. (x86_linux_dr_get_addr): Likewise. (x86_linux_dr_get_control): Likewise. (x86_linux_dr_get_status): Likewise. (update_debug_registers_callback): Likewise. (x86_linux_dr_set_control): Likewise. (x86_linux_dr_set_addr): Likewise. (x86_linux_update_debug_registers): Likewise. gdb/gdbserver/ChangeLog: * Makefile.in (x86-linux-dregs.o): New rule. * configure.srv: Add x86-linux-dregs.o to relevant targets. * linux-x86-low.c: Include nat/x86-linux-dregs.h. (u_debugreg_offset): Moved to nat/x86-linux-dregs.c. (x86_linux_dr_get): Likewise. (x86_linux_dr_set): Likewise. (update_debug_registers_callback): Likewise. (x86_linux_dr_set_addr): Likewise. (x86_linux_dr_get_addr): Likewise. (x86_linux_dr_set_control): Likewise. (x86_linux_dr_get_control): Likewise. (x86_linux_dr_get_status): Likewise. (x86_linux_update_debug_registers): Likewise.
2015-03-24Make lwp_info.arch_private handling sharedGary Benson2-2/+2
This commit moves the code to handle lwp_info.arch_private for Linux x86 into a new shared file, nat/x86-linux.c. gdb/ChangeLog: * nat/x86-linux.h: New file. * nat/x86-linux.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h. (x86-linux.o): New rule. * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o. * config/i386/linux64.mh (NATDEPFILES): Likewise. * nat/linux-nat.h (struct arch_lwp_info): New forward declaration. (lwp_set_arch_private_info): New declaration. (lwp_arch_private_info): Likewise. * linux-nat.c (lwp_set_arch_private_info): New function. (lwp_arch_private_info): Likewise. * x86-linux-nat.c: Include nat/x86-linux.h. (arch_lwp_info): Removed structure. (update_debug_registers_callback): Use lwp_set_debug_registers_changed. (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed and lwp_set_debug_registers_changed. (x86_linux_new_thread): Use lwp_set_debug_registers_changed. gdb/gdbserver/ChangeLog: * Makefile.in (x86-linux.o): New rule. * configure.srv: Add x86-linux.o to relevant targets. * linux-low.c (lwp_set_arch_private_info): New function. (lwp_arch_private_info): Likewise. * linux-x86-low.c: Include nat/x86-linux.h. (arch_lwp_info): Removed structure. (update_debug_registers_callback): Use lwp_set_debug_registers_changed. (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed and lwp_set_debug_registers_changed. (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2015-03-20Remove gdb.hpJan Kratochvil1-2/+2
gdb/ChangeLog 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com> * config/djgpp/README: Remove gdb.hp. gdb/testsuite/ChangeLog 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (ALL_SUBDIRS): Remove gdb.hp. * README: Remove HP-UX and gdb.hp. (configuration): * configure: Regenerate. * configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile, gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile, gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile, gdb.hp/gdb.defects/Makefile. * gdb.hp/Makefile.in: File deleted. * gdb.hp/gdb.aCC/Makefile.in: File deleted. * gdb.hp/gdb.aCC/optimize.c: File deleted. * gdb.hp/gdb.aCC/optimize.exp: File deleted. * gdb.hp/gdb.aCC/run.c: File deleted. * gdb.hp/gdb.aCC/watch-cmd.exp: File deleted. * gdb.hp/gdb.base-hp/Makefile.in: File deleted. * gdb.hp/gdb.base-hp/callfwmall.c: File deleted. * gdb.hp/gdb.base-hp/callfwmall.exp: File deleted. * gdb.hp/gdb.base-hp/dollar.c: File deleted. * gdb.hp/gdb.base-hp/dollar.exp: File deleted. * gdb.hp/gdb.base-hp/genso-thresh.c: File deleted. * gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted. * gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted. * gdb.hp/gdb.base-hp/pxdb.c: File deleted. * gdb.hp/gdb.base-hp/pxdb.exp: File deleted. * gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted. * gdb.hp/gdb.base-hp/reg-pa64.s: File deleted. * gdb.hp/gdb.base-hp/reg.exp: File deleted. * gdb.hp/gdb.base-hp/reg.s: File deleted. * gdb.hp/gdb.base-hp/sized-enum.c: File deleted. * gdb.hp/gdb.base-hp/sized-enum.exp: File deleted. * gdb.hp/gdb.base-hp/so-thresh.exp: File deleted. * gdb.hp/gdb.base-hp/so-thresh.mk: File deleted. * gdb.hp/gdb.base-hp/so-thresh.sh: File deleted. * gdb.hp/gdb.compat/Makefile.in: File deleted. * gdb.hp/gdb.compat/average.c: File deleted. * gdb.hp/gdb.compat/sum.c: File deleted. * gdb.hp/gdb.compat/xdb.c: File deleted. * gdb.hp/gdb.compat/xdb0.c: File deleted. * gdb.hp/gdb.compat/xdb0.h: File deleted. * gdb.hp/gdb.compat/xdb1.c: File deleted. * gdb.hp/gdb.compat/xdb1.exp: File deleted. * gdb.hp/gdb.compat/xdb2.exp: File deleted. * gdb.hp/gdb.compat/xdb3.exp: File deleted. * gdb.hp/gdb.defects/Makefile.in: File deleted. * gdb.hp/gdb.defects/bs14602.c: File deleted. * gdb.hp/gdb.defects/bs14602.exp: File deleted. * gdb.hp/gdb.defects/solib-d.c: File deleted. * gdb.hp/gdb.defects/solib-d.exp: File deleted. * gdb.hp/gdb.defects/solib-d1.c: File deleted. * gdb.hp/gdb.defects/solib-d2.c: File deleted. * gdb.hp/gdb.objdbg/Makefile.in: File deleted. * gdb.hp/gdb.objdbg/objdbg01.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted. * gdb.hp/gdb.objdbg/objdbg02.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg03.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg04.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted. * gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted. * gdb.hp/gdb.objdbg/tools/symaddr: File deleted. * gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted. * gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted. * gdb.hp/tools/odump: File deleted.
2015-03-13Remove HPUXJan Kratochvil3-8/+0
IIUC it is a pre-requisite for IPv6 support, some UNICes do not support getaddrinfo required for IPv6. But coincidentally such UNICes are no longer really supported by GDB. Therefore it was concluded we can remove all such UNICes and then we can implement IPv6 easily with getaddrinfo. In mail Re: getaddrinfo available on all GDB hosts? [Re: [PATCH v2] Add IPv6 support for remote TCP connections] Message-ID: <20140211034157.GG5485@adacore.com> https://sourceware.org/ml/gdb-patches/2014-02/msg00333.html Joel said: So I chose HP-UX first for this patch. gdb/ChangeLog 2014-10-16 Jan Kratochvil <jan.kratochvil@redhat.com> Remove HPUX. * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o. (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o. (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and ia64-hpux-tdep.h, solib-ia64-hpux.h. (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c, ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c. * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and hppa-hpux-tdep.c. * config/ia64/hpux.mh: Remove file. * config/pa/hpux.mh: Remove file. * configure: Rebuilt. * configure.ac (dlgetmodinfo, somread.o): Remove. * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete. (ia64-*-hpux*): Remove its float format exception. * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete. * hppa-hpux-nat.c: Remove file. * hppa-hpux-tdep.c: Remove file. * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private): Move them here from hppa-tdep.h (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static. (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception. * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private): Move them to hppa-tdep.c. (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove declarations. * ia64-hpux-nat.c: Remove file. * ia64-hpux-tdep.c: Remove file. * ia64-hpux-tdep.h: Remove file. * inf-ttrace.c: Remove file. * inf-ttrace.h: Remove file. * solib-ia64-hpux.c: Remove file. * solib-ia64-hpux.h: Remove file. * solib-pa64.c: Remove file. * solib-pa64.h: Remove file. * solib-som.c: Remove file. * solib-som.h: Remove file. * somread.c: Remove file.
2015-03-05Enable rthreads support on OpenBSD/hppaMark Kettenis1-1/+1
gdb/ 2015-03-05 Mark Kettenis <kettenis@gnu.org> * hppabsd-nat.c: Remove file. * hppaobsd-nat.c: New file. * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add hppaobsd-nat.c. * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with hppaobsd-nat.o.
2015-01-15Move code to disable ASR to nat/Sergio Durigan Junior18-14/+23
This patch moves the shared code present on gdb/linux-nat.c:linux_nat_create_inferior and gdb/gdbserver/linux-low.c:linux_create_inferior to nat/linux-personality.c. This code is responsible for disabling address space randomization based on user setting, and using <sys/personality.h> to do that. I decided to put the prototype of the maybe_disable_address_space_randomization on nat/linux-osdata.h because it seemed the best place to put it. I regression-tested this patch on Fedora 20 x86_64, and found no regressions. gdb/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h. (linux-personality.o): New rule. * common/common-defs.h: Include <stdint.h>. * config/aarch64/linux.mh (NATDEPFILES): Include linux-personality.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise. * config/powerpc/linux.mh (NATDEPFILES): Likewise. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/s390/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. * defs.h: Remove #include <stdint.h> (moved to common/common-defs.h). * linux-nat.c: Include nat/linux-personality.h. Remove #include <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to nat/linux-personality.c). (linux_nat_create_inferior): Remove code to disable address space randomization (moved to nat/linux-personality.c). Create cleanup to disable address space randomization. * nat/linux-personality.c: New file. * nat/linux-personality.h: Likewise. gdb/gdbserver/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (SFILES): Add linux-personality.c. (linux-personality.o): New rule. * configure.srv (srv_linux_obj): Add linux-personality.o to the list of objects to be built. * linux-low.c: Include nat/linux-personality.h. (linux_create_inferior): Remove code to disable address space randomization (moved to ../nat/linux-personality.c). Create cleanup to disable address space randomization.
2015-01-14Detect 64-bit-ness in PowerPC Book III-EYao Qi1-1/+1
This patch is to teach both GDB and GDBServer to detect 64-bit inferior correctly. We find a problem that GDBServer is unable to detect on a e5500 core processor. Current GDBServer assumes that MSR is a 64-bit register, but MSR is a 32-bit register in Book III-E. This patch is to fix this problem by checking the right bit in MSR, in order to handle both Book III-S and Book III-E. In order to detect Book III-S and Book III-E, we check the PPC_FEATURE_BOOKE from the host's HWCAP (by getauxval on glibc >= 2.16. If getauxval doesn't exist, we implement the fallback by parsing /proc/self/auxv), because it should an invariant on the same machine cross different processes. In order to share code, I add nat/ppc-linux.c for both GDB and GDBserver side. gdb: 2015-01-14 Yao Qi <yao@codesourcery.com> * Makefile.in (ppc-linux.o): New rule. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o. * configure.ac: AC_CHECK_FUNCS(getauxval). * config.in: Re-generated. * configure: Re-generated. * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p): Declare. * nat/ppc-linux.c: New file. * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]: Call ppc64_64bit_inferior_p. gdb/gdbserver: 2015-01-14 Yao Qi <yao@codesourcery.com> * Makefile.in (SFILES): Add nat/ppc-linux.c. (ppc-linux.o): New rule. * configure.srv (powerpc*-*-linux*): Add ppc-linux.o. * configure.ac: AC_CHECK_FUNCS(getauxval). * config.in: Re-generated. * configure: Re-generated. * linux-ppc-low.c (ppc_arch_setup) [__powerpc64__]: Call ppc64_64bit_inferior_p
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker12-12/+12
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-01-01Yearly gdb/ChangeLog rotation.Joel Brobecker1-0/+1
This patch renames gdb/'s ChangeLog to ChangeLog-2014 and creates a new one for 2015. config/djgpp/fnchange.lst is updated accordingly. gdb/ChangeLog: * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
2014-12-03Use core regset iterators on Sparc SolarisUlrich Weigand1-1/+1
Remove native-only core file handling on Sparc Solaris. Instead, enable the sparc target generic core regset logic on Solaris by providing appropriate register offset maps. Thanks to Joel Brobecker for testing! gdb/ * config/sparc/sol2.mh (NATDEPFILES): Remove core-regset.o. * sparc-sol2-tdep.c: Include "regset.h". (sparc32_sol2_supply_core_gregset): New function. (sparc32_sol2_collect_core_gregset): Likewise. (sparc32_sol2_supply_core_fpregset): Likewise. (sparc32_sol2_collect_core_fpregset): Likewise. (sparc32_sol2_gregset, sparc32_sol2_fpregset): New variables. (sparc32_sol2_init_abi): Set tdep->gregset/sizeof_gregset and tdep->fpregset/sizeof_fpregset. * sparc64-sol2-tdep.c: Include "regset.h". (sparc64_sol2_supply_core_gregset): New function. (sparc64_sol2_collect_core_gregset): Likewise. (sparc64_sol2_supply_core_fpregset): Likewise. (sparc64_sol2_collect_core_fpregset): Likewise. (sparc64_sol2_gregset, sparc64_sol2_fpregset): New variables. (sparc64_sol2_init_abi): Set tdep->gregset/sizeof_gregset and tdep->fpregset/sizeof_fpregset.
2014-12-01Use core regset iterators on GNU HurdUlrich Weigand1-1/+1
Remove native-only core file handling on GNU Hurd. Instead, enable the x86 target generic core regset logic on the Hurd by providing an appropriate register offset map. Thanks to Samuel Thibault for testing! gdb/ * config/i386/i386gnu.mh (NATDEPFILES): Remove core-regset.o. * i386gnu-nat.c: Do not include <sys/procfs.h> or "gregset.h". (CREG_OFFSET, creg_offset, CREG_ADDR): Remove. (supply_gregset, supply_fpregset): Remove. * i386gnu-tdep.c (i386gnu_gregset_reg_offset): New variable. (i386gnu_init_abi): Set tdep->gregset_reg_offset, gregset_num_regs, and sizeof_gregset.
generated by cgit v1.1 at 2024-12-26 23:35:19 +0000