aboutsummaryrefslogtreecommitdiff
path: root/gdb/config/i386
AgeCommit message (Collapse)AuthorFilesLines
2016-07-01Consolidate x86 debug register code for BSD native targets.John Baldwin6-7/+7
Move the debug register support code from amd64bsd-nat.c and i386bsd-nat.c into a shared x86bsd-nat.c. Instead of setting up x86_dr_low in amd64fbsd-nat.c and i386fbsd-nat.c, add a x86bsd_target function that creates a new target that inherits from inf_ptrace and sets up x86 debug registers if supported. In addition to initializing x86_dr_low, the x86bsd target installs a custom mourn_inferior target operation to clean up the x86 debug register state. Previously this was only done on amd64. Now it will be done for both i386 and amd64. The i386bsd_target and amd64bsd_target functions create targets that inherit from x86bsd rather than inf_ptrace. gdb/ChangeLog: * Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with 'x86bsd-nat.h'. * amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of 'amd64bsd-nat.h'. (amd64bsd_xsave_len): Rename and move to x86bsd-nat.c. (amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len' with 'x86bsd_xsave_len'. (amd64bsd_store_inferior_registers): Likewise. (amd64bsd_target): Inherit from x86bsd_target. (amd64bsd_dr_get): Rename and move to x86bsd-nat.c. (amd64bsd_dr_set): Likewise. (amd64bsd_dr_set_control): Likewise. (amd64bsd_dr_set_addr): Likewise. (amd64bsd_dr_get_addr): Likewise. (amd64bsd_dr_get_status): Likewise. (amd64bsd_dr_get_control): Likewise. * amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of 'amd64bsd-nat.h'. (super_mourn_inferior): Move to x86bsd-nat.c. (amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c. (amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with 'x86bsd_xsave_len'. (_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and mourn_inferior' target op. * config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o. * config/i386/fbsd64.mh: Likewise. * config/i386/nbsd64.mh: Likewise. * config/i386/nbsdelf.mh: Likewise. * config/i386/obsd.mh: Likewise. * config/i386/obsd64.mh: Likewise. * i386bsd-nat.c: Include 'x86bsd-nat.h'. (i386bsd_xsave_len): Rename and move to x86bsd-nat.c. (i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len' with 'x86bsd_xsave_len'. (i386bsd_store_inferior_registers): Likewise. (i386bsd_target): Inherit from x86bsd_target. (i386bsd_dr_get): Rename and move to x86bsd-nat.c. (i386bsd_dr_set): Likewise. (i386bsd_dr_set_control): Likewise. (i386bsd_dr_set_addr): Likewise. (i386bsd_dr_get_addr): Likewise. (i386bsd_dr_get_status): Likewise. (i386bsd_dr_get_control): Likewise. * i386bsd-nat.h (i386bsd_xsave_len): Remove. (i386bsd_dr_set_control): Remove. (i386bsd_dr_set_addr): Remove. (i386bsd_dr_get_addr): Remove. (i386bsd_dr_get_status): Remove. (i386bsd_dr_get_control): Remove. * i386fbsd-nat.c: Include 'x86bsd-nat.h'. (i386fbsd_read_description): Replace 'i386bsd_xsave_len' with 'x86bsd_xsave_len'. (_initialize_i386fbsd_nat): Remove x86 watchpoint setup and mourn_inferior' target op. * x86bsd-nat.c: New file. * x86bsd-nat.h: New file.
2016-02-02Merge gdb and gdbserver implementations for siginfoWalfred Tedeschi1-1/+1
Extract the compatible siginfo handling from amd64-linux-nat.c and gdbserver/linux-x86-low to a new file nat/amd64-linux-siginfo.c. 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com> gdb/ChangeLog: * nat/amd64-linux-siginfo.c: New file. * nat/amd64-linux-siginfo.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h. (amd64-linux-siginfo.o): New rule. * config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o. * amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include. (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo) (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo) (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid) (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status) (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band) (cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c. gdb/gdbserver/ChangeLog: * configure.srv (x86_64-*-linux*): Add amd64-linux-siginfo.o to srv_tgtobj. (i[34567]86-*-linux*): Add amd64-linux-siginfo.o to srv_tgtobj. * linux-x86-low.c [__x86_64__]: Include "nat/amd64-linux-siginfo.h". (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo) (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo) (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid) (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status) (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band) (cpt_si_fd, si_timerid, si_overrun): Move from nat/amd64-linux-siginfo.c. * Makefile.in (amd64-linux-siginfo.o:): New rule.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker3-3/+3
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-07-15Revert the previous 7 commits of: Validate binary before useJan Kratochvil2-2/+2
ddc98fbf2fd9e244a215a4d09e559180dc573a14 Create empty nat/linux-maps.[ch] and common/target-utils.[ch] 6e5b4429db0d66e2d0b27e1bcfe4709f3dae73ed Move gdb_regex* to common/ f7af1fcd759fa126612018a5916cf808df7bb8bc Prepare linux_find_memory_regions_full & co. for move 9904185cfde13d6c6849f1f042c8e3b74974cf08 Move linux_find_memory_regions_full & co. 700ca40f6fc1addd7238f4ab57f76c095ad3c99f gdbserver build-id attribute generator ca5268b6be265580b91ef75c1a1a9815f581ae42 Validate symbol file using build-id 0a94970d663a053c523f23ac0d71deb25a77f709 Tests for validate symbol file using build-id gdb/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 6 commits: Create empty nat/linux-maps.[ch] and common/target-utils.[ch]. Move gdb_regex* to common/ Prepare linux_find_memory_regions_full & co. for move Move linux_find_memory_regions_full & co. gdbserver build-id attribute generator Validate symbol file using build-id gdb/gdbserver/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 3 commits: Move gdb_regex* to common/ Move linux_find_memory_regions_full & co. gdbserver build-id attribute generator gdb/doc/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 2 commits: gdbserver build-id attribute generator Validate symbol file using build-id gdb/testsuite/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous commit: Tests for validate symbol file using build-id.
2015-07-15Create empty nat/linux-maps.[ch] and common/target-utils.[ch]Jan Kratochvil2-2/+2
Prepare new files for later move. gdb/ChangeLog 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com Jan Kratochvil <jan.kratochvil@redhat.com> Create empty nat/linux-maps.[ch] and common/target-utils.[ch]. * Makefile.in (HFILES_NO_SRCDIR); Add nat/linux-maps.h, common/target-utils.h. (COMMON_OBS): Add target-utils.o. (linux-maps.o, target-utils.o): New. * target/target-utils.c: New file. * target/target-utils.h: New file. * config/i386/linux.mh (NATDEPFILES): Add linux-maps.o. * config/i386/linux64.mh (NATDEPFILES): Ditto. * nat/linux-maps.c: New file. * nat/linux-maps.h: New file. gdb/gdbserver/ChangeLog 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com Jan Kratochvil <jan.kratochvil@redhat.com> Create empty nat/linux-maps.[ch] and common/target-utils.[ch]. * Makefile.in (OBS): Add target-utils.o. (linux-maps.o, target-utils.o): New. * configure.srv (srv_linux_obj): Add linux-maps.o.
2015-06-10Introduce nat/linux-namespaces.[ch]Gary Benson2-2/+2
This commit introduces new shared files nat/linux-namespaces.[ch] containing code to support Linux namespaces that will be used by both GDB and gdbserver. gdb/ChangeLog: * configure.ac (AC_CHECK_FUNCS): Add setns. * config.in: Regenerate. * configure: Likewise. * nat/linux-namespaces.h: New file. * nat/linux-namespaces.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h. (linux-namespaces.o): New rule. * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise. * config/powerpc/linux.mh (NATDEPFILES): Likewise. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/s390/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. gdb/gdbserver/ChangeLog: * configure.ac (AC_CHECK_FUNCS): Add setns. * config.in: Regenerate. * configure: Likewise. * Makefile.in (SFILES): Add nat/linux-namespaces.c. (linux-namespaces.o): New rule. * configure.srv (srv_linux_obj): Add linux-namespaces.o.
2015-03-24Move low-level Linux x86 debug register code to a shared fileGary Benson2-2/+4
This commit moves the now-identical low-level Linux x86 debug register code from gdb/x86-linux-nat.c and gdb/gdbserver/linux-x86-low.c into a new shared file gdb/nat/x86-linux-dregs.c. gdb/ChangeLog: * nat/x86-linux-dregs.h: New file. * nat/x86-linux-dregs.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h. (x86-linux-dregs.o): New rule. * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o. * config/i386/linux64.mh (NATDEPFILES): Likewise. * x86-linux-nat.c: Include nat/x86-linux-dregs.h. (u_debugreg_offset): Moved to nat/x86-linux-dregs.c. (x86_linux_dr_get): Likewise. (x86_linux_dr_set): Likewise. (x86_linux_dr_get_addr): Likewise. (x86_linux_dr_get_control): Likewise. (x86_linux_dr_get_status): Likewise. (update_debug_registers_callback): Likewise. (x86_linux_dr_set_control): Likewise. (x86_linux_dr_set_addr): Likewise. (x86_linux_update_debug_registers): Likewise. gdb/gdbserver/ChangeLog: * Makefile.in (x86-linux-dregs.o): New rule. * configure.srv: Add x86-linux-dregs.o to relevant targets. * linux-x86-low.c: Include nat/x86-linux-dregs.h. (u_debugreg_offset): Moved to nat/x86-linux-dregs.c. (x86_linux_dr_get): Likewise. (x86_linux_dr_set): Likewise. (update_debug_registers_callback): Likewise. (x86_linux_dr_set_addr): Likewise. (x86_linux_dr_get_addr): Likewise. (x86_linux_dr_set_control): Likewise. (x86_linux_dr_get_control): Likewise. (x86_linux_dr_get_status): Likewise. (x86_linux_update_debug_registers): Likewise.
2015-03-24Make lwp_info.arch_private handling sharedGary Benson2-2/+2
This commit moves the code to handle lwp_info.arch_private for Linux x86 into a new shared file, nat/x86-linux.c. gdb/ChangeLog: * nat/x86-linux.h: New file. * nat/x86-linux.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h. (x86-linux.o): New rule. * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o. * config/i386/linux64.mh (NATDEPFILES): Likewise. * nat/linux-nat.h (struct arch_lwp_info): New forward declaration. (lwp_set_arch_private_info): New declaration. (lwp_arch_private_info): Likewise. * linux-nat.c (lwp_set_arch_private_info): New function. (lwp_arch_private_info): Likewise. * x86-linux-nat.c: Include nat/x86-linux.h. (arch_lwp_info): Removed structure. (update_debug_registers_callback): Use lwp_set_debug_registers_changed. (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed and lwp_set_debug_registers_changed. (x86_linux_new_thread): Use lwp_set_debug_registers_changed. gdb/gdbserver/ChangeLog: * Makefile.in (x86-linux.o): New rule. * configure.srv: Add x86-linux.o to relevant targets. * linux-low.c (lwp_set_arch_private_info): New function. (lwp_arch_private_info): Likewise. * linux-x86-low.c: Include nat/x86-linux.h. (arch_lwp_info): Removed structure. (update_debug_registers_callback): Use lwp_set_debug_registers_changed. (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed and lwp_set_debug_registers_changed. (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2015-01-15Move code to disable ASR to nat/Sergio Durigan Junior2-2/+2
This patch moves the shared code present on gdb/linux-nat.c:linux_nat_create_inferior and gdb/gdbserver/linux-low.c:linux_create_inferior to nat/linux-personality.c. This code is responsible for disabling address space randomization based on user setting, and using <sys/personality.h> to do that. I decided to put the prototype of the maybe_disable_address_space_randomization on nat/linux-osdata.h because it seemed the best place to put it. I regression-tested this patch on Fedora 20 x86_64, and found no regressions. gdb/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h. (linux-personality.o): New rule. * common/common-defs.h: Include <stdint.h>. * config/aarch64/linux.mh (NATDEPFILES): Include linux-personality.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise. * config/powerpc/linux.mh (NATDEPFILES): Likewise. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/s390/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. * defs.h: Remove #include <stdint.h> (moved to common/common-defs.h). * linux-nat.c: Include nat/linux-personality.h. Remove #include <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to nat/linux-personality.c). (linux_nat_create_inferior): Remove code to disable address space randomization (moved to nat/linux-personality.c). Create cleanup to disable address space randomization. * nat/linux-personality.c: New file. * nat/linux-personality.h: Likewise. gdb/gdbserver/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (SFILES): Add linux-personality.c. (linux-personality.o): New rule. * configure.srv (srv_linux_obj): Add linux-personality.o to the list of objects to be built. * linux-low.c: Include nat/linux-personality.h. (linux_create_inferior): Remove code to disable address space randomization (moved to ../nat/linux-personality.c). Create cleanup to disable address space randomization.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker3-3/+3
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-12-01Use core regset iterators on GNU HurdUlrich Weigand1-1/+1
Remove native-only core file handling on GNU Hurd. Instead, enable the x86 target generic core regset logic on the Hurd by providing an appropriate register offset map. Thanks to Samuel Thibault for testing! gdb/ * config/i386/i386gnu.mh (NATDEPFILES): Remove core-regset.o. * i386gnu-nat.c: Do not include <sys/procfs.h> or "gregset.h". (CREG_OFFSET, creg_offset, CREG_ADDR): Remove. (supply_gregset, supply_fpregset): Remove. * i386gnu-tdep.c (i386gnu_gregset_reg_offset): New variable. (i386gnu_init_abi): Set tdep->gregset_reg_offset, gregset_num_regs, and sizeof_gregset.
2014-11-19Don't set CC in config/i386/go32.mhYao Qi1-1/+0
I cross-compile gdb for msdosdjgpp (both target and host is i586-pc-msdosdjgpp), so the CC should be i586-pc-msdosdjgpp-gcc. However, CC is set incorrectly to gcc after config/i386/go32.mh is inlined into the Makefile. This patch is to remove the CC setting in config/i386/go32.mh. gdb: 2014-11-19 Yao Qi <yao@codesourcery.com> * config/i386/go32.mh (CC): Remove.
2014-09-16Add hardware watchpoint support for x86 GNU Hurd.Samuel Thibault1-1/+2
gdb/ * config/i386/i386gnu.mh (NATDEPFILES): Add x86-nat.o and x86-dregs.o. * gnu-nat.c (inf_threads): New function. * gnu-nat.h (inf_threads_ftype): New typedef. (inf_threads): New declaration. * i386gnu-nat.c: Include "x86-nat.h" and "inf-child.h". [i386_DEBUG_STATE] (i386_gnu_dr_get, i386_gnu_dr_set) (i386_gnu_dr_set_control_one, i386_gnu_dr_set_control) (i386_gnu_dr_set_addr_one, i386_gnu_dr_set_addr) (i386_gnu_dr_get_reg, i386_gnu_dr_get_addr, 386_gnu_dr_get_status) (i386_gnu_dr_get_control): New functions. (reg_addr): New structure. (_initialize_i386gnu_nat) [i386_DEBUG_STATE]: Initialize hardware i386 debugging register hooks. * NEWS: Mention this.
2014-09-02Rename 32- and 64-bit Intel files from "i386" to "x86"Gary Benson10-10/+10
This commit renames nine files that contain code used by both 32- and 64-bit Intel ports such that their names are prefixed with "x86" rather than "i386". All types, functions and variables within these files are likewise renamed such that their names are prefixed with "x86" rather than "i386". This makes GDB follow the convention used by gdbserver such that 32-bit Intel code lives in files called "i386-*", 64-bit Intel code lives in files called "amd64-*", and code for both 32- and 64-bit Intel lives in files called "x86-*". This commit only renames OS-independent files. The Linux ports of both GDB and gdbserver now follow the i386/amd64/x86 convention fully. Some ports still use the old convention where "i386" in file/function/ type/variable names can mean "32-bit only" or "32- and 64-bit" but I don't want to touch ports I can't fully test except where absolutely necessary. gdb/ChangeLog: * i386-nat.h: Renamed as... * x86-nat.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * i386-nat.c: Renamed as... * x86-nat.c: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * common/i386-xstate.h: Renamed as... * common/x86-xstate.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * nat/i386-cpuid.h: Renamed as... * nat/x86-cpuid.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * nat/i386-gcc-cpuid.h: Renamed as... * nat/x86-gcc-cpuid.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * nat/i386-dregs.h: Renamed as... * nat/x86-dregs.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * nat/i386-dregs.c: Renamed as... * nat/x86-dregs.c: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. gdb/gdbserver/ChangeLog: * i386-low.h: Renamed as... * x86-low.h: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated. * i386-low.c: Renamed as... * x86-low.c: New file. All type, function and variable name prefixes changed from "i386_" to "x86_". All references updated.
2014-07-11Move duplicated code into new filesGary Benson2-1/+2
This commit moves the duplicated code in {i386,amd64}-linux-nat.c into the new files x86-linux-nat.[ch]. Additionally, a new file i386-linux-nat.h was required to expose a value required by the 32-bit code in x86-linux-nat.c. gdb/ 2014-07-11 Gary Benson <gbenson@redhat.com> * i386-linux-nat.h: New file. * x86-linux-nat.h: Likewise. * x86-linux-nat.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add the above new headers. * config/i386/linux.mh (NATDEPFILES): Add x86-linux-nat.o. * config/i386/linux64.mh (NATDEPFILES): Likewise. * amd64-linux-nat.c (x86-linux-nat.h): New include. (PTRACE_GETREGSET): Now in x86-linux-nat.h. (PTRACE_SETREGSET): Likewise. (arch_lwp_info): Now in x86-linux-nat.c. (have_ptrace_getregset): Now in x86-linux-nat.h. (x86_linux_dr_get): Now in x86-linux-nat.c. (x86_linux_dr_set): Likewise. (x86_linux_dr_get_addr): Likewise. (x86_linux_dr_get_control): Likewise. (x86_linux_dr_get_status): Likewise. (update_debug_registers_callback): Likewise. (x86_linux_dr_set_control): Likewise. (x86_linux_dr_set_addr): Likewise. (x86_linux_prepare_to_resume): Likewise. (x86_linux_new_thread): Likewise. (x86_linux_new_fork): Likewise. (x86_linux_get_thread_area): Likewise. (super_post_startup_inferior): Likewise. (x86_linux_child_post_startup_inferior): Likewise. (AMD64_LINUX_USER64_CS): Likewise. (AMD64_LINUX_X32_DS): Likewise. (x86_linux_read_description): Likewise. (x86_linux_enable_btrace): Likewise. (x86_linux_disable_btrace): Likewise. (x86_linux_teardown_btrace): Likewise. (x86_linux_read_btrace): Likewise. (x86_linux_create_target): Likewise. (x86_linux_add_target): Likewise. * i386-linux-nat.c (x86-linux-nat.h): New include. (PTRACE_GETREGSET): Now in x86-linux-nat.h. (PTRACE_SETREGSET): Likewise. (arch_lwp_info): Now in x86-linux-nat.c. (have_ptrace_getregset): Now in x86-linux-nat.h. (x86_linux_dr_get): Now in x86-linux-nat.c. (x86_linux_dr_set): Likewise. (x86_linux_dr_get_addr): Likewise. (x86_linux_dr_get_control): Likewise. (x86_linux_dr_get_status): Likewise. (update_debug_registers_callback): Likewise. (x86_linux_dr_set_control): Likewise. (x86_linux_dr_set_addr): Likewise. (x86_linux_prepare_to_resume): Likewise. (x86_linux_new_thread): Likewise. (x86_linux_new_fork): Likewise. (x86_linux_get_thread_area): Likewise. (super_post_startup_inferior): Likewise. (x86_linux_child_post_startup_inferior): Likewise. (AMD64_LINUX_USER64_CS): Likewise. (AMD64_LINUX_X32_DS): Likewise. (x86_linux_read_description): Likewise. (x86_linux_enable_btrace): Likewise. (x86_linux_disable_btrace): Likewise. (x86_linux_teardown_btrace): Likewise. (x86_linux_read_btrace): Likewise. (x86_linux_create_target): Likewise. (x86_linux_add_target): Likewise.
2014-06-19Create nat/i386-dregs.cGary Benson10-10/+10
This commit moves code to be shared from i386-{nat,low}.[ch] into a new file, nat/i386-dregs.c. gdb/ 2014-06-19 Gary Benson <gbenson@redhat.com> * nat/i386-dregs.c: New file. * Makefile.in (i386-dregs.o): New rule. * config/i386/cygwin.mh (NATDEPFILES): Add i386-dregs.o. * config/i386/cygwin64.mh (NATDEPFILES): Likewise. * config/i386/darwin.mh (NATDEPFILES): Likewise. * config/i386/fbsd.mh (NATDEPFILES): Likewise. * config/i386/fbsd64.mh (NATDEPFILES): Likewise. * config/i386/go32.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/i386/mingw.mh (NATDEPFILES): Likewise. * config/i386/mingw64.mh (NATDEPFILES): Likewise. * i386-nat.h (debug_hw_points): New declaration. * i386-nat.c (breakpoint.h): Remove include. (command.h): Likewise. (target.h): Likewise. (gdb_assert.h): Likewise. (debug_hw_points): Made nonstatic. (debug_printf): Now in i386-dregs.c. (TARGET_HAS_DR_LEN_8): Likewise. (DR_CONTROL_SHIFT): Likewise. (DR_CONTROL_SIZE): Likewise. (DR_RW_EXECUTE): Likewise. (DR_RW_WRITE): Likewise. (DR_RW_READ): Likewise. (DR_RW_IORW): Likewise. (DR_LEN_1): Likewise. (DR_LEN_2): Likewise. (DR_LEN_4): Likewise. (DR_LEN_8): Likewise. (DR_LOCAL_ENABLE_SHIFT): Likewise. (DR_GLOBAL_ENABLE_SHIFT): Likewise. (DR_ENABLE_SIZE): Likewise. (DR_LOCAL_SLOWDOWN): Likewise. (DR_GLOBAL_SLOWDOWN): Likewise. (DR_CONTROL_RESERVED): Likewise. (I386_DR_CONTROL_MASK): Likewise. (I386_DR_VACANT): Likewise. (I386_DR_LOCAL_ENABLE): Likewise. (I386_DR_GLOBAL_ENABLE): Likewise. (I386_DR_DISABLE): Likewise. (I386_DR_SET_RW_LEN): Likewise. (I386_DR_GET_RW_LEN): Likewise. (I386_DR_WATCH_HIT): Likewise. (i386_wp_op_t): Likewise. (i386_show_dr): Likewise. (i386_length_and_rw_bits): Likewise. (i386_insert_aligned_watchpoint): Likewise. (i386_remove_aligned_watchpoint): Likewise. (i386_handle_nonaligned_watchpoint): Likewise. (i386_update_inferior_debug_regs): Likewise. (i386_insert_watchpoint): Use i386_dr_insert_watchpoint. (i386_remove_watchpoint): Use i386_dr_remove_watchpoint. (i386_region_ok_for_watchpoint): Use i386_dr_region_ok_for_watchpoint. (i386_stopped_data_address): Use i386_dr_stopped_data_address. gdb/gdbserver/ 2014-06-19 Gary Benson <gbenson@redhat.com> * Makefile.in (i386-dregs.o): New rule. * configure.srv: Add i386-dregs.o to all targets using i386-low.o. * i386-low.c (target.h): Remove include. (TARGET_HAS_DR_LEN_8): Now in i386-dregs.c. (DR_CONTROL_SHIFT): Likewise. (DR_CONTROL_SIZE): Likewise. (DR_RW_EXECUTE): Likewise. (DR_RW_WRITE): Likewise. (DR_RW_READ): Likewise. (DR_RW_IORW): Likewise. (DR_LEN_1): Likewise. (DR_LEN_2): Likewise. (DR_LEN_4): Likewise. (DR_LEN_8): Likewise. (DR_LOCAL_ENABLE_SHIFT): Likewise. (DR_GLOBAL_ENABLE_SHIFT): Likewise. (DR_ENABLE_SIZE): Likewise. (DR_LOCAL_SLOWDOWN): Likewise. (DR_GLOBAL_SLOWDOWN): Likewise. (DR_CONTROL_RESERVED): Likewise. (I386_DR_CONTROL_MASK): Likewise. (I386_DR_VACANT): Likewise. (I386_DR_LOCAL_ENABLE): Likewise. (I386_DR_GLOBAL_ENABLE): Likewise. (I386_DR_DISABLE): Likewise. (I386_DR_SET_RW_LEN): Likewise. (I386_DR_GET_RW_LEN): Likewise. (I386_DR_WATCH_HIT): Likewise. (i386_wp_op_t): Likewise. (i386_show_dr): Likewise. (i386_length_and_rw_bits): Likewise. (i386_insert_aligned_watchpoint): Likewise. (i386_remove_aligned_watchpoint): Likewise. (i386_handle_nonaligned_watchpoint): Likewise. i386_update_inferior_debug_regs(): Likewise. (i386_dr_insert_watchpoint): Likewise. (i386_dr_remove_watchpoint): Likewise. (i386_dr_region_ok_for_watchpoint): Likewise. (i386_dr_stopped_data_address): Likewise. (i386_dr_stopped_by_watchpoint): Likewise.
2014-03-01Enable rhreads support on OpenBSD/i386.Mark Kettenis1-1/+1
gdb/ChangeLog: * i386obsd-nat.c: Include "obsd-nat.h". (_initialize_i386obsd_nat): Call obsd_add_target instead of add_target. * config/i386/obsd.mh (NATDEPFILES): Add obsd-nat.o.
2014-03-01Enable rthreads support on OpenBSD/amd64.Mark Kettenis1-1/+1
gdb/ChangeLog: * amd64obsd-nat.c (_initialize_amd64obsd_nat): Call obsd_add_target instead of add_target. * config/i386/obsd64.mh (NATDEPFILES): Add obsd-nat.o.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker3-3/+3
2013-09-24Remove a.out NetBSD and OpenBSD hostsJan Kratochvil2-12/+0
gdb/ 2013-09-21 Jan Kratochvil <jan.kratochvil@redhat.com> Remove a.out NetBSD and OpenBSD hosts. * NEWS (Removed native configurations): New. * config/arm/nbsdaout.mh: Remove. * config/i386/nbsdaout.mh: Remove. * config/i386/obsdaout.mh: Remove. * config/m68k/nbsdaout.mh: Remove. * config/sparc/nbsdaout.mh: Remove. * config/vax/nbsdaout.mh: Remove. * configure.host (arm*-*-netbsd*, i[34567]86-*-netbsd*) (i[34567]86-*-openbsd[0-2].*, i[34567]86-*-openbsd3.[0-3]) (m68*-*-netbsd*, sparc-*-netbsd*, vax-*-netbsd*): Add them to obsolete error. (arm*-*-netbsd*, i[34567]86-*-netbsd*, i[34567]86-*-openbsd[0-2].*) (i[34567]86-*-openbsd3.[0-3], m68*-*-netbsd*, sparc-*-netbsdaout*) (sparc-*-netbsd*, vax-*-netbsd*): Remove.
2013-08-22 Unify ptrace options discovery code and make both GDB andLuis Machado2-2/+3
gdbserver use it. gdb/ * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-nat.h and nat/linux-waitpid.h. (linux-waitpid.o): New object file rule. * common/linux-ptrace.c: Include nat/linux-waitpid.h. (current_ptrace_options): Moved from linux-nat.c. (linux_ptrace_test_ret_to_nx): Use type casts for ptrace parameters. (linux_fork_to_function): New function. (linux_grandchild_function): Likewise. (linux_child_function): Likewise. (linux_check_ptrace_features): New function, heavily based on linux-nat.c:linux_test_for_tracefork. (linux_enable_event_reporting): New function. (ptrace_supports_feature): Likewise. (linux_supports_tracefork): Likewise. (linux_supports_traceclone): Likewise. (linux_supports_tracevforkdone): Likewise. (linux_supports_tracesysgood): Likewise. * common/linux-ptrace.h (HAS_NOMMU): Moved from gdbserver/linux-low.c. (linux_enable_event_reporting): New declaration. (linux_supports_tracefork): Likewise. (linux_supports_traceclone): Likewise. (linux_supports_tracevforkdone): Likewise. (linux_supports_tracesysgood): Likewise. * config.in (PTRACE_TYPE_ARG4): Regenerate. * config/aarch64/linux.mh (NATDEPFILES): Add linux-waitpid.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise.. * config/powerpc/linux.mh (NATDEPFILES): Likewise.. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. * configure.ac (AC_CACHE_CHECK): Add void * to the list of ptrace's 4th argument's types. Check the type of PTRACE_TYPE_ARG4. * configure: Regenerate. * linux-nat.c: Include nat/linux-nat.h and nat/linux-waitpid.h. (SYSCALL_SIGTRAP): Moved to nat/linux-nat.h. (linux_supports_tracefork_flag): Remove. (linux_supports_tracesysgood_flag): Likewise. (linux_supports_tracevforkdone_flag): Likewise. (current_ptrace_options): Moved to common/linux-ptrace.c. (linux_tracefork_child): Remove. (my_waitpid): Remove. (linux_test_for_tracefork): Renamed to linux_check_ptrace_features and moved to common/linux-ptrace.c. (linux_test_for_tracesysgood): Remove. (linux_supports_tracesysgood): Remove. (linux_supports_tracefork): Remove. (linux_supports_tracevforkdone): Remove. (linux_enable_tracesysgood): Remove. (linux_enable_event_reporting): Remove. (linux_init_ptrace): New function. (linux_child_post_attach): Call linux_init_ptrace. (linux_child_post_startup_inferior): Call linux_init_ptrace. (linux_child_follow_fork): Call linux_supports_tracefork and linux_supports_tracevforkdone. (linux_child_insert_fork_catchpoint): Call linux_supports_tracefork. (linux_child_insert_vfork_catchpoint): Likewise. (linux_child_set_syscall_catchpoint): Call linux_supports_tracesysgood. (lin_lwp_attach_lwp): Call linux_supports_tracefork. * nat/linux-nat.h: New file. * nat/linux-waitpid.c: New file. * nat/linux-waitpid.h: New file. gdb/gdbserver/ * Makefile.in: Explain why ../target and ../nat are not listed as include file search paths. (linux-waitpid.o): New object file rule. * configure.srv (srv_native_linux_obj): New variable. Replace all occurrences of linux native object files with $srv_native_linux_obj. * linux-low.c: Include nat/linux-nat.h and nat/linux-waitpid.h. (HAS_NOMMU): Move defining logic to common/linux-ptrace.c. (linux_enable_event_reporting): Remove declaration. (my_waitpid): Moved to common/linux-waitpid.c. (linux_wait_for_event): Pass ptid when calling linux_enable_event_reporting. (linux_supports_tracefork_flag): Remove. (linux_enable_event_reporting): Likewise. (linux_tracefork_grandchild): Remove. (STACK_SIZE): Moved to common/linux-ptrace.c. (linux_tracefork_child): Remove. (linux_test_for_tracefork): Remove. (linux_look_up_symbols): Call linux_supports_traceclone. (initialize_low): Remove call to linux_test_for_tracefork. * linux-low.h (PTRACE_TYPE_ARG3): Move to common/linux-ptrace.h. (PTRACE_TYPE_ARG4): Likewise. Include linux-ptrace.h.
2013-07-01Normalize on PATH_MAX instead of MAXPATHLEN throughout.Pedro Alves1-4/+0
With the pathmax gnulib module in place, we can use PATH_MAX consistently throughout, instead of the current mixbag of PATH_MAX and MAXPATHLEN uses. It's no longer necessary to include sys/param.h (supposedly, I can't check all ports touched here) for MAXPATHLEN. Don't remove sys/param.h from GDB's configure.ac, as later tests in the file use HAVE_SYS_PARAM_H checks. Tested on x86_64 Fedora 17. Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp. gdb/ 2013-07-01 Pedro Alves <palves@redhat.com> * defs.h: Include "pathmax.h". * utils.c: Don't include sys/param.h. (gdb_realpath): Remove code that checks for MAXPATHLEN. * solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX instead of MAXPATHLEN. * solib-sunos.c: Don't include sys/param.h. * xcoffread.c: Don't include sys/param.h. * bsd-kvm.c: Don't include sys/param.h. * darwin-nat.c: Don't include sys/param.h. (darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * darwin-nat-info.c: Don't include sys/param.h. * fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * i386obsd-nat.c: Don't include sys/param.h. * inf-child.c: Don't include sys/param.h. (inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN. * linux-fork.c: Don't include sys/param.h. (fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN. * linux-nat.c: Don't include sys/param.h. (linux_child_pid_to_exec_file, linux_proc_pending_signals) (linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN. * m68klinux-nat.c: Don't include sys/param.h. * nbsd-nat.c: Don't include sys/param.h. (nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * ppc-linux-nat.c: Don't include sys/param.h. * rs6000-nat.c: Don't include sys/param.h. * spu-linux-nat.c. Don't include sys/param.h. * windows-nat.c: Don't include sys/param.h. * xtensa-linux-nat.c: Don't include sys/param.h. * config/i386/nm-fbsd.h: Don't include sys/param.h. gdb/gdbserver/ 2013-07-01 Pedro Alves <palves@redhat.com> * server.h: Include "pathmax.h". * linux-low.c: Don't include sys/param.h. (linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of MAXPATHLEN. * win32-low.c: Don't include sys/param.h. (win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN.
2013-04-11gdb/Jan Kratochvil5-0/+5
* Makefile.in (HAVE_NATIVE_GCORE_TARGET): New. (generated_files): Add gcore. (install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or HAVE_NATIVE_GCORE_HOST. (gcore): New. * NEWS (Changes since GDB 7.6): Mention newly installed gcore. * config/alpha/alpha-osf3.mh, config/i386/fbsd.mh, config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh, config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh, config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh: Add HAVE_NATIVE_GCORE_HOST. * configure: Regenerate. * configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it. New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME. New AC_CONFIG_FILES for gcore. * configure.tgt: Add gdb_have_gcore to the initial comment. Set gdb_have_gcore. * gdb_gcore.sh: Rename to ... * gcore.in: ... here. Remove gcore.sh comment. Use GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME substitutions. gdb/doc/ * Makefile.in (MAN1S): Add gcore.1. Remove "Host, target, and site specific Makefile fragments" comment. (@host_makefile_frag@, HAVE_NATIVE_GCORE_TARGET): New. (install-man1, uninstall-man1): Conditionalize gcore.1. (gcore.1): New. * gdb.texinfo (Man Pages): Add gcore man. (gcore man): New node.
2013-03-11Install the btrace target ops for i386-linux-nat and amd64-linux-nat.Markus Metzger2-2/+3
gdb/ * amd64-linux-nat.c: Include btrace.h and linux-btrace.h. (amd64_linux_enable_btrace): New. (amd64_linux_disable_btrace): New. (amd64_linux_teardown_btrace): New. (_initialize_amd64_linux_nat): Initialize btrace ops. * i386-linux.nat.c: Include btrace.h and linux-btrace.h. (i386_linux_enable_btrace): New. (i386_linux_disable_btrace): New. (i386_linux_teardown_btrace): New. (_initialize_i386_linux_nat): Initialize btrace ops. * config/i386/linux.mh: Add linux-btrace.o. * config/i386/linux64.mh: Add linux-btrace.o.
2013-03-05 * configure.host: Add x86_64-*-cygwin* as host.Corinna Vinschen1-0/+20
* configure.tgt: Add x86_64-*-cygwin* as target. * config/i386/cygwin64.mh: New file. * gdbserver/configure.srv: Add x86_64-*-cygwin* as target.
2013-02-12Consistent use of (C) after "Copyright".Pedro Alves2-2/+2
While writing the previous patch, I noticed that we're not consistent with the (C) in the copyright header. The maintainers manual prefers having it, though also says it's optional. We have over 10x more files with (C) than without in gdb's code, so I spent a few minutes grepping and fixing. Funny enough, the testsuite has it backwards. I'll leave that for another time. gdb/ 2013-02-12 Pedro Alves <palves@redhat.com> * amd64-darwin-tdep.c: Add (C) after Copyright. * cli/cli-cmds.h: Ditto. * cli/cli-decode.c: Ditto. * cli/cli-decode.h: Ditto. * cli/cli-dump.c: Ditto. * cli/cli-dump.h: Ditto. * cli/cli-interp.c: Ditto. * cli/cli-logging.c: Ditto. * cli/cli-script.c: Ditto. * cli/cli-script.h: Ditto. * cli/cli-setshow.c: Ditto. * cli/cli-setshow.h: Ditto. * cli/cli-utils.c: Ditto. * cli/cli-utils.h: Ditto. * config/alpha/nm-osf3.h: Ditto. * config/djgpp/djconfig.sh: Ditto. * config/i386/nm-fbsd.h: Ditto. * config/i386/nm-i386gnu.h: Ditto. * config/nm-linux.h: Ditto. * config/nm-nto.h: Ditto. * config/rs6000/nm-rs6000.h: Ditto. * config/sparc/nm-sol2.h: Ditto. * darwin-nat-info.c: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * gdb-demangle.h: Ditto. * i386-darwin-nat.c: Ditto. * i386-darwin-tdep.c: Ditto. * linux-fork.h: Ditto. * m32c-tdep.c: Ditto. * microblaze-linux-tdep.c: Ditto. * microblaze-rom.c: Ditto. * microblaze-tdep.c: Ditto. * microblaze-tdep.h: Ditto. * mips-linux-tdep.h: Ditto. * ppc-ravenscar-thread.c: Ditto. * ppc-ravenscar-thread.h: Ditto. * prologue-value.c: Ditto. * prologue-value.h: Ditto. * ravenscar-thread.c: Ditto. * ravenscar-thread.h: Ditto. * sparc-ravenscar-thread.c: Ditto. * sparc-ravenscar-thread.h: Ditto. * tilegx-linux-tdep.c: Ditto. * unwind_stop_reasons.def: Ditto. * windows-nat.h: Ditto. * xtensa-linux-tdep.c: Ditto. * xtensa-xtregs.c: Ditto. * regformats/regdat.sh: Ditto. * regformats/regdef.h: Ditto. gdb/gdbserver/ 2013-02-12 Pedro Alves <palves@redhat.com> * linux-xtensa-low.c: Ditto. * xtensa-xtregs.c: Ditto.
2013-01-02 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.Tom Tromey1-1/+1
* configure.ac: Check for Mach-O support in BFD. Update CONFIG_OBS. * configure: Rebuild.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker2-3/+2
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-03-13gdb/Jan Kratochvil2-2/+2
* Makefile.in (linux-ptrace.o): New. * common/linux-procfs.c (linux_proc_pid_is_zombie): New, from linux-nat.c. * common/linux-procfs.h (linux_proc_pid_is_zombie): New declaration. * common/linux-ptrace.c: New file. * config/alpha/alpha-linux.mh (NATDEPFILES): Add linux-ptrace.o. * config/arm/linux.mh: Likewise. * config/i386/linux.mh: Likewise. * config/i386/linux64.mh: Likewise. * config/ia64/linux.mh: Likewise. * config/m32r/linux.mh: Likewise. * config/m68k/linux.mh: Likewise. * config/mips/linux.mh: Likewise. * config/pa/linux.mh: Likewise. * config/powerpc/linux.mh: Likewise. * config/powerpc/ppc64-linux.mh: Likewise. * config/powerpc/spu-linux.mh: Likewise. * config/s390/s390.mh: Likewise. * config/sparc/linux.mh: Likewise. * config/sparc/linux64.mh: Likewise. * config/xtensa/linux.mh: Likewise. * linux-nat.c (linux_lwp_is_zombie): Remove, move it to common/linux-procfs.c. (wait_lwp): Rename linux_lwp_is_zombie to linux_proc_pid_is_zombie. gdb/gdbserver/ * Makefile.in (linux-ptrace.o): New. * configure.srv (arm*-*-linux*, bfin-*-*linux*, crisv32-*-linux*) (cris-*-linux*, i[34567]86-*-linux*, ia64-*-linux*, m32r*-*-linux*) (m68*-*-linux*, m68*-*-uclinux*, mips*-*-linux*, powerpc*-*-linux*) (s390*-*-linux*, sh*-*-linux*, sparc*-*-linux*, tic6x-*-uclinux) (x86_64-*-linux*, xtensa*-*-linux*): Add linux-ptrace.o to SRV_TGTOBJ of these targets. * linux-low.c (linux_attach_lwp_1): Remove redundent else clause.
2012-02-092012-02-09 Valery Khromov <valery.khromov@gmail.com>Pedro Alves1-1/+1
PR gdb/12953 * Makefile.in (HFILES_NO_SRCDIR): Add amd64bsd-nat.h. * amd64bsd-nat.c: Add support for debug registers (adapted from i386bsd-nat.c). [HAVE_PT_GETDBREGS] (amd64bsd_dr_get, amd64bsd_dr_set) (amd64bsd_dr_set_control, amd64bsd_dr_set_addr) (amd64bsd_dr_get_addr, amd64bsd_dr_get_status) (amd64bsd_dr_get_control): New functions. * amd64bsd-nat.h: New file (adapted from i386bsd-nat.h). * amd64fbsd-nat.c: Include "amd64bsd-nat.h", "i386-nat.h". [HAVE_PT_GETDBREGS] (_initialize_amd64fbsd_nat): Add hardware watchpoints initialization. * config/i386/fbsd64.mh (NATDEPFILES): Add i386-nat.o.
2012-01-10gdb/Jan Kratochvil1-1/+1
Fix duplicate .o files after omitting libbfd.a. * Makefile.in (ALL_TARGET_OBS): Remove corelow.o. (SFILES): Add corelow.c. (COMMON_OBS): Add corelow.o. (ALLDEPFILES): Remove corelow.c. * config/alpha/alpha-linux.mh (NATDEPFILES): Remove corelow.o. * config/alpha/alpha-osf3.mh: Likewise. * config/alpha/fbsd.mh: Likewise. * config/arm/nbsdaout.mh: Likewise. * config/arm/nbsdelf.mh: Likewise. * config/i386/i386gnu.mh: Likewise. * config/ia64/hpux.mh: Likewise. * config/ia64/linux.mh: Likewise. * config/m32r/linux.mh: Likewise. * config/m68k/linux.mh: Likewise. * config/mips/irix5.mh: Likewise. * config/mips/irix6.mh: Likewise. * config/pa/hpux.mh: Likewise. * config/pa/linux.mh: Likewise. * config/powerpc/aix.mh: Likewise. * config/sparc/linux.mh: Likewise. * config/sparc/linux64.mh: Likewise. * config/sparc/sol2.mh: Likewise. * config/vax/vax.mh: Likewise. * configure.tgt (alpha*-*-freebsd* alpha*-*-kfreebsd*-gnu) (alpha*-*-netbsd*, alpha*-*-knetbsd*-gnu, alpha*-*-openbsd*) (am33_2.0*-*-linux*, arm*-wince-pe, arm*-*-mingw32ce*, arm*-*-linux*) (arm*-*-openbsd*, cris*, frv-*-*, hppa*-*-hpux*, hppa*-*-netbsd*) (hppa*-*-openbsd*, i[34567]86-*-dicos*, i[34567]86-*-freebsd*) (i[34567]86-*-kfreebsd*-gnu, i[34567]86-*-netbsd*) (i[34567]86-*-knetbsd*-gnu, i[34567]86-*-openbsd*, i[34567]86-*-nto*) (i[34567]86-*-solaris2.1[0-9]*, x86_64-*-solaris2.1[0-9]*) (i[34567]86-*-solaris*, i[34567]86-*-linux*, i[34567]86-*-cygwin*) (i[34567]86-*-mingw32*, m68*-*-netbsd*, m68*-*-knetbsd*-gnu) (m68*-*-openbsd*, m88*-*-openbsd*, microblaze*-linux-*) (microblaze*-*-linux*, mips*-*-linux*, mips*-*-netbsd*) (mips*-*-knetbsd*-gnu, mips64*-*-openbsd*, powerpc-*-netbsd*) (powerpc-*-knetbsd*-gnu, powerpc-*-openbsd*, powerpc-*-linux*) (powerpc64-*-linux*, s390*-*-*, score-*-*, sh*-*-linux*) (sh*-*-netbsdelf*, sh*-*-knetbsd*-gnu, sh*-*-openbsd*) (sparc*-*-freebsd*, sparc*-*-kfreebsd*-gnu, sparc-*-netbsd*) (sparc-*-knetbsd*-gnu, sparc64-*-netbsd*, sparc64-*-knetbsd*-gnu) (sparc-*-openbsd*, sparc64-*-openbsd*, tic6x-*-*linux, vax-*-netbsd*) (vax-*-knetbsd*-gnu, vax-*-openbsd*, x86_64-*-dicos*, x86_64-*-linux*) (x86_64-*-freebsd*, x86_64-*-kfreebsd*-gnu, x86_64-*-netbsd*) (x86_64-*-knetbsd*-gnu, x86_64-*-openbsd*, xtensa*-*-linux*): Remove corelow.o from gdb_target_obs. * corefile.c (core_target): Update the comment on NULL value. (core_file_command): Replace error by gdb_assert on CORE_TARGET. * corelow.c (sniff_core_bfd): Call error instead of warning on zero MATCHES. Drop YUMMY set on NULL. (core_close): Do not call exit_inferior_silent on zero PID. Do not reclaim CORE_DATA if it is already NULL.
2012-01-09gdb/Jan Kratochvil2-2/+2
Partially fix duplicate .o files after omitting libbfd.a. * config/alpha/alpha-osf3.mh (NATDEPFILES): Remove solib.o. * config/i386/nbsdaout.mh (NATDEPFILES): Remove solib.o. * config/i386/obsdaout.mh (NATDEPFILES): Remove solib.o. * config/m68k/nbsdaout.mh (NATDEPFILES): Remove solib.o. * config/m68k/obsd.mh (NATDEPFILES): Remove solib.o. * config/powerpc/aix.mh (NATDEPFILES): Remove xcoffread.o. * config/vax/nbsdaout.mh (NATDEPFILES): Remove solib.o.
2012-01-04Copyright year update in most files of the GDB Project.Joel Brobecker2-4/+3
gdb/ChangeLog: Copyright year update in most files of the GDB Project.
2011-08-24Move common linux procfs code to common/Luis Machado2-2/+3
2011-07-212011-07-22 Kwok Cheung Yeung <kcy@codesourcery.com>Kwok Yeung2-2/+3
gdb/ * defs.h: Add guard against inclusion in gdbserver. (struct ptid, ptid_t): Move to common/ptid.h. (xfree, xzalloc, xasprintf, xvasprintf, xstrprintf, xstrvprintf, xsnprintf, internal_error): Move to common/common-utils.h. (nomem): Delete. * gdb_assert.h: Move into common/ sub-directory. * gdb_locale.h: Ditto. * gdb_dirent.h: Ditto. * inferior.h (minus_one_ptid, null_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Move into common/ptid.h. * xml-support.c (xml_escape_text): Move into common/xml-utils.c. (gdb_xml_create_parser_and_cleanup_1, xml_fetch_context_from_file): Change nomem to malloc_failure. * xml-support.h (xml_escape_text): Move into common/xml-utils.h. * utils.c (nomem): Rename to malloc_failure. (xmalloc, xzalloc, xrealloc, xcalloc, xfree, xstrprintf, xasprintf, xvasprintf, xstrvprintf, xsnprintf): Move to common/common-utils.c. (gdb_buildargv): Change nomem to malloc_failure. * infrun.c (null_ptid, minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Move into common/ptid.c. (initialize_infrun): Delete initialization of null_ptid and minus_one_ptid. * linux-nat.c (linux_nat_xfer_osdata): Defer to linux_common_xfer_osdata. * Makefile.in (SFILES): Add common/common-utils.c, common/xml-utils.c, common/ptid.c and common/buffer.c. (HFILES_NO_SRCDIR): Add common/common-utils.h, common/xml-utils.h, common/ptid.h, common/buffer.h and common/linux-osdata.h. (COMMON_OBS): Add xml-utils.o, common-utils.o, buffer.o and ptid.o. (common-utils.o, xml-utils.o, ptid.o, buffer.o, linux-osdata.o): New rules. * common/gdb_assert.h: New. * common/gdb_dirent.h: New. * common/gdb_locale.h: New. * common/buffer.c: New. * common/buffer.h: New. * common/ptid.c: New. * common/ptid.h: New. * common/xml-utils.c: New. * common/xml-utils.h: New. * common/common-utils.c: New. * common/common-utils.h: New. * common/linux-osdata.c: New. * common/linux-osdata.h: New. * config/alpha/alpha-linux.mh (NATDEPFILES): Add linux-osdata.o. * config/arm/linux.mh (NATDEPFILES): Ditto. * config/i386/linux.mh (NATDEPFILES): Ditto. * config/i386/linux64.mh (NATDEPFILES): Ditto. * config/ia64/linux.mh (NATDEPFILES): Ditto. * config/m32r/linux.mh (NATDEPFILES): Ditto. * config/m68k/linux.mh (NATDEPFILES): Ditto. * config/mips/linux.mh (NATDEPFILES): Ditto. * config/pa/linux.mh (NATDEPFILES): Ditto. * config/powerpc/linux.mh (NATDEPFILES): Ditto. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Ditto. * config/s390/s390.mh (NATDEPFILES): Ditto. * config/sparc/linux.mh (NATDEPFILES): Ditto. * config/sparc/linux64.mh (NATDEPFILES): Ditto. * config/xtensa/linux.mh (NATDEPFILES): Ditto. gdbserver/ * linux-low.c (compare_ints, unique, list_threads, show_process, linux_core_of_thread): Delete. (linux_target_ops): Change linux_core_of_thread to linux_common_core_of_thread. (linux_qxfer_osdata): Defer to linux_common_xfer_osdata. * utils.c (malloc_failure): Change type of argument. (xmalloc, xrealloc, xcalloc, xsnprintf): Delete. * Makefile.in (SFILES): Add common/common-utils.c, common/xml-utils.c, common/linux-osdata.c, common/ptid.c and common/buffer.c. (OBS): Add xml-utils.o, common-utils.o, ptid.o and buffer.o. (IPA_OBJS): Add common-utils-ipa.o. (ptid_h, linux_osdata_h): New macros. (server_h): Add common/common-utils.h, common/xml-utils.h, common/buffer.h, common/gdb_assert.h, common/gdb_locale.h and common/ptid.h. (common-utils-ipa.o, common-utils.o, xml-utils.o, linux-osdata.o, ptid.o, buffer.o): New rules. (linux-low.o): Add common/linux-osdata.h as a dependency. * configure.srv (srv_tgtobj): Add linux-osdata.o to Linux targets. * configure.ac: Add AC_HEADER_DIRENT check. * config.in: Regenerate. * configure: Regenerate. * remote-utils.c (xml_escape_text): Delete. (buffer_grow, buffer_free, buffer_init, buffer_finish, buffer_xml_printf): Move to common/buffer.c. * server.c (main): Remove call to initialize_inferiors. * server.h (struct ptid, ptid_t, minus_one_ptid, null_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid, initialize_inferiors, xml_escape_text, internal_error, gdb_assert, gdb_assert_fail): Delete. (struct buffer, buffer_grow, buffer_free, buffer_init, buffer_finish, buffer_xml_printf, buffer_grow_str, buffer_grow_str0): Move to common/buffer.h. * inferiors.c (null_ptid, minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid, initialize_inferiors): Delete.
2011-01-01run copyright.sh for 2011.Joel Brobecker2-2/+2
2010-06-11 * gregset.h (GDB_FPXREGSET_T): Remove.Ulrich Weigand2-33/+1
(gdb_fpxregset_t): Likewise. (supply_fpxregset): Remove prototype. (fill_fpxregset): Likewise. * i386-linux-nat.c (supply_fpxregset): Remove. (fill_fpxregset): Likewise. (fetch_fpxregs): Inline supply_fpxregset call. (store_fpxregs): Inline fill_fpxregset call. * config/i386/linux.mh: Set NAT_FILE to config/nm-linux.h. * config/i386/nm-linux.h: Remove file.
2010-05-28gdb/Jan Kratochvil2-2/+4
* Makefile.in (RDYNAMIC): New. (SFILES): Add proc-service.list. * config/alpha/alpha-linux.mh (NAT_CDEPS): New. (LOADLIBES): Replace -rdynamic by $(RDYNAMIC). * config/arm/linux.mh: Likewise. * config/i386/linux.mh: Likewise. * config/i386/linux64.mh: Likewise. * config/ia64/linux.mh: Likewise. * config/m32r/linux.mh: Likewise. * config/m68k/linux.mh: Likewise. * config/mips/linux.mh: Likewise. * config/pa/linux.mh: Likewise. * config/powerpc/linux.mh: Likewise. * config/powerpc/ppc64-linux.mh: Likewise. * config/s390/s390.mh: Likewise. * config/sparc/linux.mh: Likewise. * config/sparc/linux64.mh: Likewise. * config/xtensa/linux.mh: Likewise. * configure.ac: New RDYNAMIC on native host and GCC. (solaris*): Replace -Wl,-export-dynamic by $RDYNAMIC. * configure: Regenerate. * proc-service.list: New. gdb/gdbserver/ * Makefile.in (SFILES): Add $(srcdir)/proc-service.list. (CDEPS): New. * configure.ac (RDYNAMIC): New AC_MSG_CHECKING wrapping. Test also -Wl,--dynamic-list. * configure: Regenerate. * proc-service.list: New.
2010-04-26 Removal of config/i386/nm-i386sol2.h native configuration file.Pierre Muller3-24/+0
* config/i386/nm-i386sol2.h: Remove file. * config/i386/i386sol2.mh: Remove NAT_FILE definition. * config/i386/sol2-64.mh: Idem. * config/djgpp/fnchange.lst: Idem. * Makefile.in (HFILES_NO_SRCDIR): Remove reference to that file.
2010-04-26 PR breakpoints/11531.Pierre Muller1-10/+0
* config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS): Remove macro definition and related comment. * infrun.c (CANNOT_STEP_HW_WATCHPOINTS): Remove macro. (resume): Remove code and comment related to this macro. doc ChangeLog entry: * gdbint.texinfo (CANNOT_STEP_HW_WATCHPOINTS): Remove explanation of macro deleted from GDB code.
2010-01-01Update copyright year in most headers.Joel Brobecker4-4/+5
Automatic update by copyright.sh.
2009-10-262009-10-26 Michael Snyder <msnyder@vmware.com>Hui Zhu6-6/+6
Hui Zhu <teawater@gmail.com> * Makefile.in (SFILES): Add gcore.c. (COMMON_OBS): Add gcore.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Delete gcore.o. * config/alpha/fbsd.mh (NATDEPFILES): Ditto. * config/arm/linux.mh (NATDEPFILES): Ditto. * config/i386/fbsd.mh (NATDEPFILES): Ditto. * config/i386/fbsd64.mh (NATDEPFILES): Ditto. * config/i386/i386sol2.mh (NATDEPFILES): Ditto. * config/i386/linux.mh (NATDEPFILES): Ditto. * config/i386/linux64.mh (NATDEPFILES): Ditto. * config/i386/sol2-64.mh (NATDEPFILES): Ditto. * config/ia64/linux.mh (NATDEPFILES): Ditto. * config/m32r/linux.mh (NATDEPFILES): Ditto. * config/m68k/linux.mh (NATDEPFILES): Ditto. * config/mips/linux.mh (NATDEPFILES): Ditto. * config/pa/linux.mh (NATDEPFILES): Ditto. * config/powerpc/linux.mh (NATDEPFILES): Ditto. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Ditto. * config/s390/s390.mh (NATDEPFILES): Ditto. * config/sparc/fbsd.mh (NATDEPFILES): Ditto. * config/sparc/linux.mh (NATDEPFILES): Ditto. * config/sparc/linux64.mh (NATDEPFILES): Ditto. * config/sparc/sol2.mh (NATDEPFILES): Ditto. * config/xtensa/linux.mh (NATDEPFILES): Ditto. * target.c (dummy_find_memory_regions): Change output. (dummy_make_corefile_notes): Ditto.
2009-07-072009-07-07 Tristan Gingold <gingold@adacore.com>Tristan Gingold1-7/+1
* config/i386/darwin.mh (NATDEPFILES): Remove excServer.o. Remove excServer.c target. Remove _all target. * darwin.defs: Removed.
2009-06-072009-06-07 Pedro Alves <pedro@codesourcery.com>Pedro Alves1-2/+0
* procfs.h: New. * proc-utils.h (procfs_first_available): Don't declare here. * sol-thread.c: Include procfs.h instead of sys/procfs.h and proc-utils.h. * procfs.c: Include procfs.h. (procfs_target): Make it public. Don't register procfs_can_use_hw_breakpoint here. (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS. (procfs_can_use_hw_breakpoint): Remove check of TARGET_HAS_HARDWARE_WATCHPOINTS. (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint here. (_initialize_procfs): Don't add the procfs target here. * i386-sol2-nat.c: Include target.h and procfs.h. (_initialize_amd64_sol2_nat): Install the procfs target here, customized with watchpoints support. * irix5-nat.c: Include target.h. (_initialize_core_irix5): Rename to ... (_initialize_irix5_nat): ... this. Install the procfs target here, customized with watchpoints support. * alpha-nat.c: Include procfs.h. (_initialize_core_alpha): Rename to... (_initialize_alpha_nat): ... this. Install the procfs target here, customized with watchpoints support. * sparc-sol2-nat.c: Include target.h and procfs.h. (_initialize_sparc_sol2_nat): New. * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete. * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete. * config/mips/irix5.mh (NAT_FILE): Delete. * config/mips/irix6.mh (NAT_FILE): Delete. * config/mips/nm-irix5.h: Delete. 2009-06-07 Pedro Alves <pedro@codesourcery.com> * gdbint.texinfo (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete all references.
2009-05-24 * symfile.c (add_shared_symbol_files_command): RemovePierre Muller5-42/+0
prototype and function. (_initialize _symfile): Move "add-shared-symbol-files" command and "assf" alias. * windows-nat.c (_initialize_windows_nat): to here. Change "add-shared-symbol-files" to alias. * config/i386/cygwin.mh: Remove NAT_FILE. * config/i386/mingw.mh: Remove NAT_FILE. * config/i386/mingw64.mh: Remove NAT_FILE. * config/i386/nm-cygwin.h: Remove file. * config/i386/nm-cygwin64.h: Remove file.
2009-05-14 Remove all i386 debug register low level macros in config nm files.Pierre Muller9-244/+1
(I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove. (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove. (I386_USE_GENERIC_WATCHPOIINTS): Remove. * i386-nat.h: New file (adapted from config/i386/nm-i386.h). (struct i386_dr_low_type): New type. (i386_dr_low): New global variable. * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro. (i386_insert_aligned_watchpoint): Replace i386 dr low macros by i386_dr_low struct variable fields. (i386_remove_aligned_watchpoint): Likewise. (i386_stopped_data_address): Likewise. (i386_stopped_by_hwbp): Likewise. (show_debug_regs_command_added): New static variable. (add_show_debug_regs_command): New static function. (i386_use_watchpoints): Call add_show_debug_regs_command if not done. (i386_set_debug_register_length): New function. (_initialize_i386_nat): Delete. * amd64-linux-nat.c: Include "i386-nat.h". (amd64_linux_dr_set_control): Change to static. (amd64_linux_dr_get_status): Change to static. (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise. (_initialize_amd64_linux_nat): Set i386_dr_low variable fields. * go32-nat.c: Include "i386-nat.h". (go32_set_addr): Change to static. (go32_set_dr7): Change to static. Change arg type to unisgned long. (go32_get_dr6): Change to static. Change return type to unisnged long. (init_go32_ops): Set i386_dr_low variable fields. * i386-linux-nat.c: Include "i386-nat.h". (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static. (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem. (_initialize_i386_linux_nat): Set i386_dr_low variable fields. * i386bsd-nat.h: Declare functions used for i386_dr_low fields in i386fbsd-nat.c. * i386fbsd-nat.c: Include "i386-nat.h". (_initialize_i386fbsd_nat): Set i386_dr_low variable fields. * windows-nat.c: Include "i386-nat.h". (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes. Change to static. (cygwin_get_dr6): Change return type to unisnged long. (cygwin_set_dr7): Change arg type to unisgned long. (init_windows_ops): Set i386_dr_low function fields. * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call i386_set_debug_register_length. * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise. * config/i386/nm-cygwin.h: Remove all I386_* macros. * config/i386/nm-cygwin64.h: Likewise. * config/i386/nm-fbsd.h: Likewise. * config/i386/nm-linux.h: Likewise. * config/i386/nm-i386.h: Remove completely. * config/i386/nm-go32.h: Remove completely. * config/i386/nm-linux64.h: Remove completely. * config/i386/go32.mh (NAT_FILE): Remove entry. * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
2009-05-06 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)Pedro Alves1-24/+0
(procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New functions. (procfs_stopped_by_watchpoint): Made static, ptid argument removed. (_initialize_procfs): Register new watchpoint related target functions. * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT) (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT) (HAVE_CONTINUABLE_WATCHPOINT): Delete. (target_insert_watchpoint, target_remove_watchpoint): Delete. (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete declarations. * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT) (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. (target_insert_watchpoint, target_remove_watchpoint): Delete. (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete declarations. * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT) (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete. (target_insert_watchpoint, target_remove_watchpoint): Delete. (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete declarations.
2009-04-19 Set default host and target charsets in the DJGPP port.Eli Zaretskii1-1/+3
* config/djgpp/config.sed (am_cv_langinfo_codeset) (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes" in all configure scripts that define ac_cv_env_CPP_value. * go32-nat.c (dos_codepage, nl_langinfo): New functions. Include langinfo.h. * config/djgpp/nl_types.h: New file. * config/djgpp/langinfo.h: New file. * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
2009-03-26 * config/i386/nm-i386.h: Remove code withinPierre Muller7-62/+3
I386_WATCHPOINTS_IN_TARGET_VECTOR conditional. * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR macro. * config/i386/nm-cygwin64.h: Ditto. * config/i386/nm-fbsd.h: Ditto. * config/i386/nm-go32.h: Ditto. * config/i386/nm-linux.h: Ditto. * config/i386/nm-linux64.h: Ditto.
2009-02-20 * Extend use of i386_use_watchpoints to all i386 native filesPierre Muller4-0/+4
using hardware watchpoints. go32-nat.c (init_go32_ops): Call i386_use_watchpoints. i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto. windows-nat.c (init_windows_ops): Ditto. config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR. config/i386/nm-cygwin64.h: Ditto. config/i386/nm-fbsd.h: Ditto. config/i386/nm-go32.h: Ditto.
generated by cgit v1.1 at 2024-12-27 19:29:57 +0000