aboutsummaryrefslogtreecommitdiff
path: root/gdb/config.in
AgeCommit message (Collapse)AuthorFilesLines
2000-03-28Fix typo in description of GETREGS.Andrew Cagney1-1/+1
2000-03-27Move default definition of HAVE_PTRACE_GETREGS to acconfig.h.Andrew Cagney1-17/+18
2000-03-052000-03-05 Mark Kettenis <kettenis@gnu.org>Mark Kettenis1-0/+3
Allow GDB to run on Linux 2.0 again. * config.in: Add HAVE_PTRACE_GETREGS. * configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS. * configure: Regenerated. * config/i386/nm-linux.h (CANNOT_FETCH_REGISTER, CANNOT_STORE_REGISTER): New defines. * i386-linux-nat.c (have_ptrace_getregs): New variable. (PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register, old_fetch_inferior_registers, CANNOT_STORE_REGISTER, store_register, old_store_inferior_registers): Copied over from `inptrace.c' as a temporary measure. (fetch_regs, store_regs, fetch_fpregs, store_fpregs): Conditionalize on HAVE_PTRACE_GETREGS. Define stubs if HAVE_PTRACE_GETREGS isn't defined. (fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails with EIO. (fetch_inferior_registers, store_inferior_registers): Fall back on the method use in `infptrace.c' (by calling old_fetch_inferior_registers and old_store_inferior_registers) if `have_ptrace_getregs' isn't set.
2000-02-162000-02-09 Mark Kettenis <kettenis@gnu.org>Mark Kettenis1-0/+11
* configure.in: Check for lwpid_t, psaddr_t, prgregset_t and prfpregset_t in <sys/procfs.h>. * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T. * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t, prgregset_t and prfpregset_t if they are not already present.
2000-01-06import gdb-2000-01-05 snapshotJason Molenda1-3/+3
1999-12-22import gdb-1999-12-21 snapshotJason Molenda1-0/+9
1999-12-07import gdb-1999-12-06 snapshotJason Molenda1-0/+3
1999-11-02import gdb-1999-11-01 snapshotJason Molenda1-2/+5
1999-10-05import gdb-1999-10-04 snapshotJason Molenda1-0/+3
1999-08-31import gdb-1999-08-30 snapshotJason Molenda1-0/+3
1999-08-16import gdb-1999-08-16 snapshotJason Molenda1-0/+3
1999-08-09import gdb-1999-08-09 snapshotJason Molenda1-3/+6
1999-05-11import gdb-1999-05-10Stan Shebs1-0/+3
1999-05-05import gdb-19990504 snapshotStan Shebs1-12/+3
1999-04-26import gdb-19990422 snapshotStan Shebs1-0/+10
1999-04-16Initial creation of sourceware repositorygdb-4_18-branchpointStan Shebs1-0/+325
1999-04-16Initial creation of sourceware repositoryStan Shebs1-307/+0
1999-02-091999-02-08 Jason Molenda (jsm@bugshack.cygnus.com)Jason Molenda1-3/+16
* gnu-regex.c: Check ENABLE_NLS instead of HAVE_LIBINTL_H. * configure.in: Don't check for libintl.h. * configure, config.in: Regenerated. Fixes a problem on debian systems, a conflict between the /usr/include/libintl.h and the routines that are actually linked in, up in ../intl.
1999-02-01Allow PPC users to select which PPC/RS6000 variant they're debuggingJim Blandy1-0/+4
at run-time. At the moment, the only thing this affects is the set of registers visible. * config/rs6000/tm-rs6000.h (REGISTER_NAME): Define this as a call to the function rs6000_register_name. (rs6000_register_name): Include extern decl. (NUM_REGS): Bump to 183. What's the right way to do this? (FIRST_UISA_SP_REGNUM, LAST_UISA_SP_REGNUM): Renamed from FIRST_SP_REGNUM, LAST_SP_REGNUM. (REGISTER_BYTES): Recompute this. * rs6000-tdep.c: Renamed all uses of FIRST_SP_REGNUM and LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with some concomitant formatting changes. #include "gdbcmd.h", so we can define commands here. (struct variant): New structure. (COMMON_UISA_REG_NAMES, PPC_UISA_SPR_NAMES, PPC_SEGMENT_REG_NAMES, PPC_32_OEA_SPR_NAMES, num_registers): New macros. (register_names_rs6000, register_names_uisa, register_names_403, register_names_403GC, register_names_505, register_names_860, register_names_601, register_names_602, register_names_603, register_names_604, register_names_750, variants): New variables. (rs6000_register_name, install_variant, find_variant_by_name, install_variant_by_name, list_variants, show_current_variant, set_processor, show_processor): New functions. (_initialize_rs6000_tdep): Define new commands `set processor' and `show processor', and call install_variant_by_name to set the default variant. * rs6000-nat.c: Renamed all uses of FIRST_SP_REGNUM and LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with some concomitant formatting changes. * configure.in: Accept the `--with-cpu' flag, to specify a default processor variant. * acconfig.h: Provide a blurb for TARGET_CPU_DEFAULT, which is set by configure's `--with-cpu' flag. * config.in, configure: Regenerated.
1999-01-06HP merge related changes; TUI stuff; new configs for 10.20 and 11.00; new files.David Taylor1-0/+3
1998-10-141998-10-14 Jason Molenda (jsm@bugshack.cygnus.com)Jason Molenda1-0/+3
* defs.h: Move _initialize_printcmd, _initialize_stack, _initialize_blockframe out of here and in to their respective .c files. * blockframe.c: Move _initialize_blockframe prototype to here. * printcmd.c: Move _initialize_printcmd prototype to here. * stack.c: Move _initialize_stack prototype to here. * source.c, symtab.h: Move _initialize_source prototype to the .c file. * values.c, value.h: Move _initialize_values prototype to the .c file. * gdbthread.h, thread.c: Move _initialize_thread prototype to the .c file. * breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype to the .c file. * abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c: Standardize comments for the prototype section of these files. * configure.in: Look in libc for wctype before looking for it in libc. The last one is to fix the GNU ld (~2.9.1) + Solaris 2.6 interaction problem where an empty stub library (libw) causes a core dump when we call vasprintf (e.g. `info br') in the final linked gdb.
1998-10-14 * sol-thread.c (ps_pstop, etc): simple test for proc_service.hFelix Lee1-0/+4
version didn't work for sol2.6; pushed it to autoconf. * configure.in (gdb_cv_proc_service_is_old): new test. * acconfig.h (PROC_SERVICE_IS_OLD): new define. * configure, config.in: regenerate.
1998-10-131998-10-12 Jason Molenda (jsm@bugshack.cygnus.com)Jason Molenda1-19/+0
* Makefile.in (AWK): Unused; remove. * configure.in: Remove unused autoconf checks for MINIX, memcpy, poll, select, strings.h. * config.in: Regenerated. * configure: Regenerated.
1998-10-131998-10-12 Jason Molenda (jsm@bugshack.cygnus.com)Jason Molenda1-0/+3
* configure.in: Check for sys/debugreg.h, asm/debugreg.h. * i386v-nat.c: Include asm/debugreg.h, sys/debugreg.h if it is not present. This is to work around a conflict where the Linux 2.1.x kernel and glibc 2.0.x are not in sync; including <sys/debugreg.h> will result in an error. With luck, these losers will get their act together and we can trash this hack in the near future.
1998-08-181998-08-18 Jason Molenda (jsm@bugshack.cygnus.com)Jason Molenda1-0/+24
* configure.in: Add more header files to AC_CHECK_HEADERS. * configure: Regenerated. * command.c: Include wait.h or sys/wait.h if present. * inftarg.c: Ditto. * core-aout.c: Include ptrace.h or sys/ptrace.h if present, based on autoconf test. * infptrace.c: Ditto. * expprint.c: Include ctype.h for isprint prototype. * i386aix-nat.c: Include sys/reg.h if autoconf says it is present. * i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if present, based on autoconf test. * utils.c: Include curses.h and term.h if present. (puts_debug): Change 'carriage_return' local variable to return_p to avoid name clash. * config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE, determine it with autoconf. * config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it with autoconf. * config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it with autoconf. * config/i386/nm-i386v.h: Ditto. * config/i386/nm-symmetry.h: Ditto. * config/m88k/xm-cxux.h: Ditto. * config/m88k/xm-dgux.h: Ditto. * config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary. * config/m68k/nm-delta68.h: Removed.
1998-06-10Wed Jun 10 14:06:05 1998 Jason Molenda (crash@bugshack.cygnus.com)Jason Molenda1-0/+24
* configure.in: Add some tests for gnu-regex.c's benefit. See if btowc() function is provided in C library. * configure, config.in: Regenerated. * Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c if necessary. * btowc.c: New file. * gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris' benefit. Drop namespace preserving defines for now. Mods based on the modifications used in GNU grep 2.2 to make gnu-regex.c compile on other OSes.
1998-04-23Thu Apr 23 12:52:21 1998 Philippe De Muyter <phdm@macqel.be>Jason Molenda1-0/+3
* configure.in (strerror): Check if function must be declared. * acconfig.h (NEED_DECLARATION_STRERROR): New define slot. * gdb_string.h (strerror): Function declaration issued if NEED_DECLARATION_STRERROR. * configure, config.in : Files regenerated.
1998-04-23 * config.in: Rebuilt.Tom Tromey1-1/+98
* acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT, HAVE_LC_MESSAGES): Define.
1998-04-22Humoring RMS by saying "GNU/Linux" instead of just "Linux"Stan Shebs1-1/+1
1998-01-14 * configure.in (--with-mmalloc): Add new configure arg to use theFred Fish1-0/+9
mmalloc package. Default is to not use it. (START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not the string "2". * acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef. * configure: Regenerated. * config.in: Regenerated. * Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove. (MMALLOC): Set using configure. (MMALLOC_CFLAGS): Set using configure. * config/i386/tm-linux.h (sys_quotactl): Define to 1 rather than just defining it. * mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC. * utils.c (NO_MMALLOC): Use USE_MMALLOC instead. * objfiles.c: ditto. * defs.h: ditto. * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove. * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove. * config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove. * config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove. * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove. * gdbserver/Makefile.in (MMALLOC_*): Remove. * config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove. * config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1997-12-15(Mostly from Gavin Koch)Andrew Cagney1-0/+6
In dwarf2read.c, if the ABI is 32 bit and 64 bit addresses are encountered discard the most significant 32 bits. Use CORE_ADDR for address variables instead of long. Add more explicit tx49 configur target. Check/use sigaction/SA_RESTART in remote-sim.c
1997-05-08Part II of getting GdbTk's stop button to always work.Andrew Cagney1-0/+3
1997-03-13 * configure: Regenerated.Tom Tromey1-13/+20
* configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM. * config.in: Regenerated. * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl, HAVE_HPUX_THREAD_SUPPORT): Define. * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT, TCL_ALL_EVENTS. * configure: Regenerated. * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in LIBS.
1996-12-01 Add support for Irix 6.2 native O32 and N32 ABI.Peter Schauer1-0/+3
* config.in, configure.in, configure: Check for <objlist.h>. * configure.tgt: Handle mips*-sgi-irix6* like irix5 for now. * cp-valprint.c (cp_print_value_fields): Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the address of a static member. * dwarf2read.c: Turn warnings and recoverable errors into complaints, add new complaints where appropriate. gcc -Wall cleanup. (struct line_head): Change line_base from char to int to avoid problems with compilers whose plain char is represented by an unsigned char. (struct partial_die_info): Add is_declaration field. (dwarf2_tmp_obstack): New obstack for allocating temporary storage used during symbol reading. (cu_header_offset): New variable for resolving relative reference dies. (optimized_out, basereg, islocal, frame_base_reg, frame_base_offset): New interface variables for decode_locdesc. (struct dwarf2_pinfo): New structure for communication between psymtab and symtab reading, passed via pst->read_symtab_private. (dwarf2_has_info, dwarf2_build_psymtabs): Accept objects files without line number sections. (dwarf2_build_psymtabs_hard): Initialize temporary obstack for symbol reading. Allocate and initialize pst->read_symtab_private. Relocate pst->textlow and pst->texthigh with baseaddr. (scan_partial_symbols): Do not add DW_AT_declaration symbols to the partial symbol table. Add file scope enumerator symbols to the partial symbol table. Fix typo in highpc computation. If we didn't find a lowpc, set it to highpc to avoid complaints from `maint check. (add_partial_symbol): Relocate symbol values with baseaddr. Add static DW_TAG_subprogram and DW_TAG_variable symbols to the minimal symbol table. Obtain symbol values for DW_TAG_variable symbols from the location descriptor, skip symbols with missing location desciptors. Skip symbols for aggregate types without children. Handle enumerator symbols. (dwarf2_psymtab_to_symtab): Issue symbol reading message if verbose. (psymtab_to_symtab_1): Set local variables from pst->read_symtab_private, set cu_header_offset and baseaddr. Initialize temporary obstack for symbol reading, initialize buildsym and add a cleanup to really_free_pendings. Relocate highpc with baseaddr when calling end_symtab. If the compilation is from a C file generated by language preprocessors, do not set the symtab language if it was already deduced by start_subfile. Removed verbose sorting symbol table message. (process_die): Handle DW_TAG_ptr_to_member_type and DW_TAG_reference_type. Use read_subroutine_type to get the function type for DW_TAG_subprogram before calling read_func_scope. (read_file_scope): Initialize file name to <unknown>, start_subfile expects a non-NULL name. If we didn't find a lowpc, set it to highpc to avoid complaints from finish_symbol. Relocate lowpc and highpc with baseaddr. Get rid of Irix6.2 native cc compile machine prefix in comp_dir. Zero out ftypes for each new compilation unit (may be different language or different objfile). Accept compilation units without line number information, pass comp_dir to decode_lines. (read_func_scope): Initialize function name to <unknown> to avoid core dumps when DW_AT_name is missing. Relocate lowpc and highpc with baseaddr. Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations. Pass function type to new_symbol. (read_lexical_block_scope): Relocate lowpc and highpc with baseaddr. (read_structure_scope): Set TYPE_TAG_NAME, not TYPE_NAME. Handle DW_TAG_class_type. Copy fields to type_obstack, release temporary storage for fields. Don't add symbol if die is a stub die and has no children. Handle C++ static member fields. (read_enumeration): Set TYPE_TAG_NAME, not TYPE_NAME. Copy fields to type_obstack, release temporary storage for fields. Let new_symbol handle the symbol creation for enumerators instead of handcrafting a symbol. Determine signedness of enum type from enumerators. (dwarf_read_array_type): Handle variable length arrays. Use lookup_pointer_type instead of handcrafting a type. Create array type only if a DW_TAG_subrange_type was found. (read_tag_pointer_type, read_tag_reference_type): Use lookup_pointer_type and lookup_reference_type instead of handcrafting a type. (read_tag_ptr_to_member_type): New function to handle DW_TAG_ptr_to_member_type. (read_subroutine_type): Handle parameter dies. Use lookup_function_type instead of handcrafting a type. (read_typedef): Allocate a TYPE_CODE_TYPEDEF type for the typedef. (read_base_type): If the type has a name, use init_type to create a new type instead of second guessing a fundamental type. (read_comp_unit): Reset die reference table before building a new one. (dwarf2_read_section): Read section contents into psymbol_obstack. (dwarf2_read_abbrevs): Handle unterminated abbreviations for a compile unit gracefully. (read_partial_die): Zero partial die before reading its info. Handle DW_AT_declaration. Fix typo in handling of DW_FORM_block4. (read_full_die): Fix typo in handling of DW_FORM_block4. (read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes): New routines to get signed values from a buffer. (read_n_bytes, read_string): Allocate storage from the temporary obstack. If the host char size permits it, return pointer to buffer instead of allocating storage. (set_cu_language): Handle DW_LANG_Mips_Assembler. (dwarf_attr): Return NULL if reference die for DW_AT_specification or DW_AT_abstract_origin die is not found. (record_minimal_symbol): Removed, replaced with a direct call to prim_record_minimal_symbol, it now handles saving the string itself. (convert_locdesc): Removed, partial symtab reading now uses decode_locdesc. (dwarf_attr): Use dwarf2_get_ref_die_offset to get the absolute offset for the die reference. (dwarf_decode_lines): Complain if the line section info is missing. Use read_1_signed_byte to extract lh.line_base to avoid problems with compilers whose plain char is represented by an unsigned char. Add cleanups for allocated temporary storage. Start a subfile for the first file in the state machine. Fix off by one problem with dirs.dirs access. Use comp_dir when directory index is 0. Support multiple sequences (from Jason Merrill <jason@cygnus.com>). (dwarf2_start_subfile): Try to keep line numbers from identical absolute and relative file names in a common subfile. (new_symbol): Allocate symbol and symbol name on the symbol_obstack. Set SYMBOL_LINE from DW_AT_decl_line if present. Set SYMBOL_TYPE from passed type if not NULL. Change DW_TAG_variable symbol types with missing type entries to a sensible type. Handle optimized_out, offreg and islocal storage classes. Add external symbols with type information whose address isn't known as LOC_UNRESOLVED symbols. Synthesize typedefs for C++ classes, structs, unions and enumerations. Handle DW_TAG_enumerator symbols, complain for unrecognized symbol tags. (die_type): A missing DW_AT_type represents a void type. Use dwarf2_get_ref_die_offset to get the absolute offset for the die reference. (die_containing_type): New function to build type from DW_AT_containing_type attribut. (read_type_die): Handle DW_TAG_ptr_to_member_type. Treat DW_TAG_subprogram like DW_TAG_subroutine_type. (dwarf_base_type): Fix typo with creation of FT_UNSIGNED_SHORT fundamental type. (create_name): Removed, symbol name allocation is now done in new_symbol. (dump_die): Use print_address_numeric to print a CORE_ADDR. (dwarf2_empty_die_ref_table): New function to clear the die reference table. (dwarf2_get_ref_die_offset): New function to get the absolute die offset from a die reference attribute. (decode_locdesc): Complete rewrite using a stack, code mostly borrowed from dwarfread.c:locval. (dwarf_alloc_type): Removed, replaced by direct calls to alloc_type. (dwarf_alloc_block): Allocate block on temporary obstack. * elfread.c (elf_symtab_read): When handling Irix dynamic symbols, skip section name symbols and relocate all others. (elf_symfile_read): Build dwarf2 psymtab even if offset is non-zero. * irix5-nat.c (fetch_core_registers): Handle core_reg_sect from N32 executables. Call registers_fetched after extracting the registers. (obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR): New definitions to enable support of O32 and N32 format objlists. (struct so_list): New members offset, so_name and lmstart to eliminate dependencies from the objlist format used. (solib_map_sections, symbol_add_stub, solib_add, info_sharedlibrary_command, solib_address, clear_solib): Use so_name and LM_OFFSET. (first_link_map_member): Rewrite to enable support of O32 and N32 format objlists. (next_link_map_member, xfer_link_map_member): New functions to support O32 and N32 format objlists. (find_solib): Use first_link_map_member, next_link_map_member and xfer_link_map_member. (solib_create_inferior_hook): Use TARGET_SIGNAL_* instead of host signal numbers. * mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators): Pass CORE_ADDR variant to add_psymbol_to_list. * mips-tdep.c (heuristic_proc_desc): Stop examining the prologue if we encounter a positive stack adjustment. Handle `move $30,$sp'. Handle `sd reg,offset($sp)' for 32 bit ABIs. * symmisc.c (dump_msymbols, print_partial_symbols): Use print_address_numeric to print a SYMBOL_VALUE_ADDRESS. (dump_symtab): Print compilation directory if it is not NULL. * valops.c (search_struct_field, value_struct_elt_for_reference): Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the address of a static member.
1996-10-08 * Makefile.in: Add rule for hpux-thread.o (needs special headerStu Grossman1-0/+9
files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-08-21 * aclocal.m4: Include ../bfd/aclocal.m4.Ian Lance Taylor1-0/+15
* configure.in: Add stdlib.h to AC_CHECK_HEADERS. Call BFD_NEED_DECLARATION on malloc, realloc, and free. * acconfig.h: Add NEED_DECLARATION_MALLOC, NEED_DECLARATION_REALLOC, and NEED_DECLARATION_FREE. * configure, config.in: Rebuild. * defs.h: Include <stddef.h> and <stdlib.h> based on HAVE_*_H rather than __STDC__. Only declare malloc, realloc, and free if NEED_DECLARATION_* is defined.
1996-08-02changes for new tcl/tk:Tom Tromey1-3/+0
* gdbtk.c (mainWindow): Deleted. (cleanup_init): Don't destroy main window. (gdbtk_init): Main window now created by Tk_Init. * configure.in: Most X checks now handled automatically by Tk. Use new macros to find Tcl/Tk. * aclocal.m4: New version for new Tcl/Tk; from Don Libes. * config.in, configure: Regenerated. * Makefile.in (TCL, TCL_CFLAGS, TK, TK_CFLAGS, X11_CFLAGS, X11_LDFLAGS, X11_LIBS): Changed for new Tcl and Tk.
1996-07-28 * configure.in: Add test for "long long" support.Fred Fish1-0/+6
* configure: Regenerate with autoconf. * acconfig.h: Add CC_HAS_LONG_LONG * config.in: Regenerate with autoheader. * config/mips/tm-mips64.h (FORCE_LONG_LONG): Remove * config/sparc/tm-sp64.h (CC_HAS_LONG_LONG): Remove. * config/mips/tm-vr4300el.h (CC_HAS_LONG_LONG): Remove. * config/mips/tm-vr4300.h (CC_HAS_LONG_LONG): Remove. * config/mips/xm-irix5.h (CC_HAS_LONG_LONG): Remove (PRINTF_HAS_LONG_LONG): Remove. (FORCE_LONG_LONG): Remove. * config/powerpc/xm-aix.h (UINT_MAX): Undef and use gdb's version. * config/convex/xm-convex.h (CC_HAS_LONG_LONG): Remove (PRINTF_HAS_LONG_LONG): Remove. * config/xm-nbsd.h (CC_HAS_LONG_LONG): Remove. (PRINTF_HAS_LONG_LONG): Remove. * config/pa/tm-hppa.h (GET_FIELD): Put parens around subtraction inside shift. Put parens around subtraction in operand of bitwise and. (struct frame_info): Forward declare if __STDC__ defined. (frame_saved_regs): Ditto. (struct value): Ditto. (struct type): Ditto. (struct inferior_status): Ditto. (init_extra_frame_info): Add prototype. (skip_prologue): Ditto. (frameless_function_invocation): Ditto. (frame_chain): Ditto. (frame_chain_valid): Ditto. (saved_pc_after_call): Ditto. (hppa_fix_call_dummy): Ditto. (hppa_push_arguments): Ditto. (pa_do_registers_info): Ditto. (in_solib_call_trampoline): Ditto. (in_solib_return_trampoline): Ditto. (push_dummy_frame): Ditto. * convex-tdep.c (decout): Use print_longest rather than fprintf_filtered. * defs.h: Remove use of FORCE_LONG_LONG and __GNUC__ to set CC_HAS_LONG_LONG. (INT_MIN): Fix so it works correctly when assigned to a long long. * valprint.c (longest_to_int): Rewrite to remove dependence on INT_MIN and INT_MAX. (print_longest): Rewrite the code that falls back to synthesized hex output when LONGEST value is not representable as in a long and printf doesn't support printing long longs. * ch-valprint.c (chill_val_print): Cast 2nd arg of chill_print_type_scalar to LONGEST. chill_print_type_scalar): Make static and add prototype. * hppa-tdep.c (get_field): Ifdef out unused function. (set_field): Ditto. (extract_3): Ditto. (extract_5_store): Ditto. (extract_11): Ditto. (extract_12): Ditto. (deposit_17): Ditto. (extract_14): Convert to static and add prototype. (deposit_14): Ditto. (extract_21): Ditto. (deposit_21): Ditto. (extract_17): Ditto. (extract_5r_store): Ditto. (extract_5R_store): Ditto. (extract_5_load): Ditto. (find_proc_framesize): Ditto. (find_dummy_frame_regs): Ditto. (sign_extend): Ditto. (find_unwind_entry): Add prototype. (find_return_regnum): Ditto. (unwind_command): Ditto. (find_dummy_frame_regs): Add parens around subtraction in operand of bitwise-and. (skip_prologue): Add parens around operands of logical-and inside operand of logical-or. (sign_extend): Add parens around operands of subtraction inside operand of shift. (low_sign_extend): Ditto. * top.c (filename_completer): Convert old style decl of filename_completion_function into prototype. * f-lang.c (patch_common_entries): Ifdef out unused function. * stabsread.c (read_cfront_baseclasses): Remove unused local variable "msg_noterm". (resolve_cfront_continuation): Remove unused local variable "fip". (read_type): Remove unused variable xtypenums. (read_cfront_static_fields): Remove unused variable "i". (read_cfront_static_fields): Remove unused variable "nfields". (read_cfront_member_functions): Add missing comment terminator. (read_cfront_static_fields): Return 1 rather than random value. (read_cfront_baseclasses): Ditto. (read_cfront_baseclasses): Ditto. (read_cfront_baseclasses): Ditto. * somsolib.c (som_solib_create_inferior_hook): Remove unused variable "u". (som_solib_create_inferior_hook): Remove unused variable shadow_contents. (language.h): Add for needed prototypes. (som_solib_sharedlibrary_command): Add prototype. * hpread.c: (hpread_read_array_type): Add prototype. * somread.c (hpread_build_pysmtabs): Add prototype. (hpread_symfile_finish): Ditto. (hpread_symfile_init): Ditto. * hppah-nat.c (fetch_register): Convert old style decl to prototype. (gdbcore.h): Include for needed prototypes. (fetch_register): Remove unused variable "mess". * remote-pa.c (get_offsets): Ifdef out unused function. (remote_start_remote): Remove unused variable "timeout". (boot_board): Add prototype. (reaad_frame): Add prototype. (getpkt): Remove unused variable "bp". (remote_kill): Add prototype. (remote_mourn): Add prototype. (remote_insert_breakpoint): Add prototype. (remote_remove_breakpoint): Add prototype. * valops.c (value_push): Only use if PUSH_ARGUMENTS is not defined. * infcmd.c (do_registers_info): Only need prototype if DO_REGISTERS_INFO is not defined. (breakpoint_auto_delete_contents): Only need if CALL_DUMMY_BREAKPOINT_OFFSET is defined.
1996-06-13 * config.in: Regenerated.Tom Tromey1-3/+3
* acconfig.h (HAVE_THREAD_DB_LIB): Added entry. * configure: Regenerated. * aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to avoid name clashes with SunOS headers.
1996-05-14 * Makefile.in config.in configure configure.inStu Grossman1-0/+3
config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh config/sparc/tm-sun4sol2.h: Use autoconf to config Solaris thread and pthread support, since pre-2.5 systems don't come with libthread_db.so.1. * procfs.c (info_proc): Use int instead of id_t. Old versions of Irix don't see to define this.
1996-04-13 * README: Update for 4.16 release.Fred Fish1-0/+3
* configure.in (AC_CHECK_FUNCS): Also check for sbrk. * configure: Regenerate with autoconf. * config.in: Regenerate with autoheader. * main.c (main): Only use sbrk() when HAVE_SBRK is defined. * top.c (command_loop): Ditto.
1996-04-12 From: Miles Bader <miles@gnu.ai.mit.edu>Fred Fish1-0/+3
* configure.in (AC_CHECK_HEADERS): check for endian.h. Use AC_CHECK_TOOL to find AR & RANLIB. Add AC_PROG_AWK. Add host & target cases for i[345]86-*-gnu*. * config.in: Regenerate with autoheader. * configure: Regenerate with autoconf. * Makefile.in (AR, AWK): Set from corresponding autoconf substs. (init.c): Don't scan mig-generated files. * defs.h (endian.h): Include if HAVE_ENDIAN_H defined. * config/nm-m3.h (ATTACH_NO_WAIT): Define. * infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT" rather than "#ifndef MACH".
1996-04-05 * configure.in: Check for setpgid function.Fred Fish1-0/+3
* config.in: Regenerate with autoheader. * configure: Regenerate with autoconf. * inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL if it is actually defined. (gdb_setpgid): Use HAVE_SETPGID. * ch-exp.c: Change include of <string.h> to "gdb_string.h". * c-exp.y: Ditto. * f-exp.y: Ditto. * m2-exp.y: Ditto. * c-exp.y: Include <ctype.h>. * serial.c: Ditto. * config/m68k/nm-news.h: Add typedef for pid_t which is apparently missing from <sys/types.h>. Enclose entire file in NM_NEWS_H ifndef and define when included. * config/mips/nm-news-mips.h: Ditto. * config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Change name of temporary variable.
1996-03-31 * configure.in: Check whether printf family supports printingFred Fish1-0/+3
long doubles or not and define PRINTF_HAS_LONG_DOUBLE if so. * acconfig.h: Provide default undef for PRINTF_HAS_LONG_DOUBLE. * configure: Regenerate. * valprint.c (print_floating): Use PRINTF_HAS_LONG_DOUBLE. * c-exp.y (parse_number): Use PRINTF_HAS_LONG_DOUBLE. * configure.in: Fix have_gregset and have_fpregset autoconf variable names so that they match the pattern required to cache them.
1996-03-21 * config.in: Rename from config.h.in.Ian Lance Taylor1-0/+78
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in. Change CONFIG_HEADERS test in AC_OUTPUT accordingly. * configure: Rebuild. * Makefile.in (stamp-h): Depend upon config.in, not config.h.in. Set CONFIG_HEADERS to config.h:config.in. The file name config.h.in can be used on DOS filesystems.
generated by cgit v1.1 at 2024-12-22 18:20:19 +0000