aboutsummaryrefslogtreecommitdiff
path: root/gdb/config.in
AgeCommit message (Collapse)AuthorFilesLines
2015-07-02configure: check for libiptMarkus Metzger1-0/+3
Check for libipt, an Intel(R) Processor Trace decoder library. The sources can be found on github at: https://github.com/01org/processor-trace gdb/ * configure.ac: Check for libipt * configure: Regenerate. * config.in: Regenerate. * Makefile.in (LIBIPT): New. (CLIBS): Add $LIBIPT. * NEWS: document new configure options
2015-06-10Introduce nat/linux-namespaces.[ch]Gary Benson1-0/+3
This commit introduces new shared files nat/linux-namespaces.[ch] containing code to support Linux namespaces that will be used by both GDB and gdbserver. gdb/ChangeLog: * configure.ac (AC_CHECK_FUNCS): Add setns. * config.in: Regenerate. * configure: Likewise. * nat/linux-namespaces.h: New file. * nat/linux-namespaces.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h. (linux-namespaces.o): New rule. * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise. * config/powerpc/linux.mh (NATDEPFILES): Likewise. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/s390/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. gdb/gdbserver/ChangeLog: * configure.ac (AC_CHECK_FUNCS): Add setns. * config.in: Regenerate. * configure: Likewise. * Makefile.in (SFILES): Add nat/linux-namespaces.c. (linux-namespaces.o): New rule. * configure.srv (srv_linux_obj): Add linux-namespaces.o.
2015-03-31Add --with-system-zlib in gdbH.J. Lu1-3/+0
This patch adds --with-system-zlib and removes --with-zlib in gdb. * Makefile.in (ZLIB): New. (ZLIBINC): Likewise. (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC). (CLIBS): Add $(ZLIB). * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS. Add -lz to LIBS. * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>. * top.c (print_gdb_configuration): Remove --with-zlib and --without-zlib. * config.in: Regenerated. * configure: Likewise.
2015-03-13Use kinfo_getvmmap on FreeBSD to enumerate memory regions.John Baldwin1-0/+3
Use kinfo_getvmmap from libutil on FreeBSD to enumerate memory regions in a running process instead of /proc/<pid>/map. FreeBSD systems do not mount procfs by default, but kinfo_getvmmap uses a sysctl that is always available. Skip memory regions for devices as well as regions an application has requested to not be dumped via the MAP_NOCORE flag to mmap or MADV_NOCORE advice to madvise. gdb/ChangeLog: * configure.ac: AC_CHECK_LIB(util, kinfo_getvmmap). * configure: Regenerate. * config.in: Regenerate. * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't define. (fbsd_find_memory_regions): Use kinfo_getvmmap to enumerate memory regions if present.
2015-03-11[guile] Run finalizers from GDB threadAndy Wingo1-0/+3
gdb/ChangeLog: * guile/guile.c (_initialize_guile): Disable automatic finalization, if Guile offers us that possibility. * guile/guile.c (call_initialize_gdb_module): * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run finalizers in appropriate places. * config.in (HAVE_GUILE_MANUAL_FINALIZATION): New definition. * configure.ac (AC_TRY_LIBGUILE): Add a check for scm_set_automatic_finalization_enabled. * configure: Regenerated.
2015-02-27Create libiberty.m4, have GDB and GDBserver use itPedro Alves1-0/+45
Converting GDB to be a C++ program, I stumbled on 'basename' issues, like: src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char*)’ /usr/include/string.h:597:26: error: ambiguates old declaration ‘const char* basename(const char*)’ which I believe led to this bit in gold's configure.ac: dnl We have to check these in C, not C++, because autoconf generates dnl tests which have no type information, and current glibc provides dnl multiple declarations of functions like basename when compiling dnl with C++. AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp]) These checks IIUC intend to generate all the HAVE_DECL_FOO symbols that libiberty.h and ansidecl.h check. GDB is missing these checks currently, which results in the conflict shown above. This adds an m4 file that both GDB and GDBserver's configury use to pull in the autoconf checks that libiberty clients needs done in order to use these libiberty.h/ansidecl.h. gdb/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> * libiberty.m4: New file. * acinclude.m4: Include libiberty.m4. * configure.ac: Call libiberty_INIT. * config.in, configure: Regenerate. gdb/gdbserver/ 2015-02-27 Pedro Alves <palves@redhat.com> * acinclude.m4: Include libiberty.m4. * configure.ac: Call libiberty_INIT. * config.in, configure: Regenerate.
2015-01-14Detect 64-bit-ness in PowerPC Book III-EYao Qi1-0/+3
This patch is to teach both GDB and GDBServer to detect 64-bit inferior correctly. We find a problem that GDBServer is unable to detect on a e5500 core processor. Current GDBServer assumes that MSR is a 64-bit register, but MSR is a 32-bit register in Book III-E. This patch is to fix this problem by checking the right bit in MSR, in order to handle both Book III-S and Book III-E. In order to detect Book III-S and Book III-E, we check the PPC_FEATURE_BOOKE from the host's HWCAP (by getauxval on glibc >= 2.16. If getauxval doesn't exist, we implement the fallback by parsing /proc/self/auxv), because it should an invariant on the same machine cross different processes. In order to share code, I add nat/ppc-linux.c for both GDB and GDBserver side. gdb: 2015-01-14 Yao Qi <yao@codesourcery.com> * Makefile.in (ppc-linux.o): New rule. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o. * configure.ac: AC_CHECK_FUNCS(getauxval). * config.in: Re-generated. * configure: Re-generated. * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p): Declare. * nat/ppc-linux.c: New file. * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]: Call ppc64_64bit_inferior_p. gdb/gdbserver: 2015-01-14 Yao Qi <yao@codesourcery.com> * Makefile.in (SFILES): Add nat/ppc-linux.c. (ppc-linux.o): New rule. * configure.srv (powerpc*-*-linux*): Add ppc-linux.o. * configure.ac: AC_CHECK_FUNCS(getauxval). * config.in: Re-generated. * configure: Re-generated. * linux-ppc-low.c (ppc_arch_setup) [__powerpc64__]: Call ppc64_64bit_inferior_p
2014-12-17Fix MinGW compilationJan Kratochvil1-0/+3
On Sun, 14 Dec 2014 07:00:28 +0100, Yao Qi wrote: The build on mingw host is broken because mingw has no mkdtemp. ../../../git/gdb/compile/compile.c: In function 'get_compile_file_tempdir': ../../../git/gdb/compile/compile.c:194:3: error: implicit declaration of function 'mkdtemp' [-Werror=implicit-function-declaration] tempdir_name = mkdtemp (tname); ^ ../../../git/gdb/compile/compile.c:194:16: error: assignment makes pointer from integer without a cast [-Werror] tempdir_name = mkdtemp (tname); ^ cc1: all warnings being treated as errors In the end I have managed to test it by Wine myself: $ wine build_win32/gdb/gdb.exe -q build_win32/gdb/gdb.exe -ex start -ex 'compile code 1' -ex 'set confirm no' -ex quit [...] Temporary breakpoint 1, main (argc=1, argv=0x241418) at ../../gdb/gdb.c:29 29 args.argc = argc; Could not load libcc1.so: Module not found. Even if it managed to load libcc1.so (it needs host-dependent name libcc1.dll) then it would soon end up at least on: default_infcall_mmap: error (_("This target does not support inferior memory allocation by mmap.")); As currently there is only: linux-tdep.c: set_gdbarch_infcall_mmap (gdbarch, linux_infcall_mmap); While one could debug Linux targets from MS-Windows host I find it somehow overcomplicated now when we are trying to get it running at least on native Linux x86*. The 'compile' project needs a larger port effort to run on MS-Windows. gdb/ChangeLog 2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com> Fix MinGW compilation. * compile/compile.c (get_compile_file_tempdir): Call error if !HAVE_MKDTEMP. * config.in: Regenerate. * configure: Regenerate. * configure.ac (AC_CHECK_FUNCS): Add mkdtemp. gdb/testsuite/ChangeLog 2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com> Fix MinGW compilation. * gdb.compile/compile-ops.exp: Update untested message if !skip_compile_feature_tests. * gdb.compile/compile-setjmp.exp: Likewise. * gdb.compile/compile-tls.exp: Likewise. * gdb.compile/compile.exp: Likewise. * lib/gdb.exp (skip_compile_feature_tests): Check also "Command not supported on this host".
2014-11-28Use canonicalize_file_name unconditionallyYao Qi1-6/+0
gdb: 2014-11-28 Yao Qi <yao@codesourcery.com> * configure.ac (AC_CHECK_FUNCS): Remove canonicalize_file_name and realpath. * config.in: Re-generated. * configure: Re-generated. * utils.c (gdb_realpath): Remove code calling realpath, canonicalize_file_name and pathconf. [!_WIN32]: Call canonicalize_file_name.
2014-11-28Use lstat unconditionallyYao Qi1-3/+0
Since lstat gnulib module is imported, we can use it unconditionally. lstat usage was introduced by this patch https://sourceware.org/ml/gdb-patches/2012-01/msg00390.html during the review, it was suggested to import gnulib lstat module, but we didn't do that. gdb: 2014-11-28 Yao Qi <yao@codesourcery.com> * configure.ac (AC_CHECK_FUNCS): Remove lstat. * config.in, configure: Regenerate. * symfile.c (find_separate_debug_file_by_debuglink): Remove code checking HAVE_LSTAT is defined.
2014-11-28Use readlink unconditionallyYao Qi1-3/+0
Since readlink module is imported, we can use it unconditionally. This patch is to remove configure checks and HAVE_READLINK checks in code. It was mentioned in the patch below [RFA/commit] gdbserver: return ENOSYS if readlink not supported. https://sourceware.org/ml/gdb-patches/2012-02/msg00148.html to use readlink in gdbserver, but we chose something simple at that moment. gdb: 2014-11-28 Yao Qi <yao@codesourcery.com> * configure.ac (AC_CHECK_FUNCS): Remove readlink. * config.in, configure: Re-generate. * inf-child.c (inf_child_fileio_readlink): Don't check HAVE_READLINK is defined. gdb/gdbserver: 2014-11-28 Yao Qi <yao@codesourcery.com> * configure.ac(AC_CHECK_FUNCS): Remove readlink. * config.in, configure: Re-generate. * hostio.c (handle_unlink): Remove code checking HAVE_READLINK is defined.
2014-09-08Fix for PR 17247: Block SIGCHLD while initializing Guile.Doug Evans1-6/+0
The problem here is that if a thread other than gdb's main thread gets a SIGCHLD (it's an asynchronous signal so the kernel will essentially pick a random thread) then gdb will hang if it is in sigsuspend when the SIGCHLD is delivered. The other thread will see the signal and the sigsuspend won't "wake up". Guile and libgc should be blocking SIGCHLD in their threads, but we need to work with Guile 2.0 and libgc 7.4. The problem first shows up in libgc 7.4 because it is the first release that enables multiple marker threads by default. gdb/ChangeLog: PR 17247 * guile.c: #include <signal.h>. (_initialize_guile): Block SIGCHLD while initializing Guile. Replaces the following, which is reverted. 2014-07-26 Doug Evans <xdje42@gmail.com> PR 17185 * configure.ac: Add check for header gc/gc.h. Add check for function setenv. * configure: Regenerate. * config.in: Regenerate. * guile/guile.c (_initialize_guile): Add workaround for libgc 7.4.0.
2014-08-19Fix --diable-shared --enable-plugins build breakageAlan Modra1-0/+3
Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files.
2014-07-26PR 17185Doug Evans1-0/+6
PR 17185 describes a problem with using gdb+guile with libgc 7.4.0. The symptom is a hang in sigsuspend. [The thread referenced in the PR has the details.] It's not clear what the right fix is, or even where the bug is yet. This patch applies the same workaround Guile has applied. There is no functionality or real performance loss with this, and Guile has been using it for awhile. * configure.ac: Add check for header gc/gc.h. Add check for function setenv. * configure: Regenerate. * config.in: Regenerate. * guile/guile.c (_initialize_guile): Add workaround for libgc 7.4.0.
2014-06-19Demangler crash handlerGary Benson1-0/+3
This commit wraps calls to the demangler with a segmentation fault handler. The first time a segmentation fault is caught a core file is generated and the user is prompted to file a bug and offered the choice to exit or to continue their GDB session. A maintainence option is provided to allow the user to disable the crash handler if required. gdb/ 2014-06-19 Gary Benson <gbenson@redhat.com> * configure.ac [AC_CHECK_FUNCS] <sigaltstack>: New check. * configure: Regenerate. * config.in: Likewise. * main.c (signal.h): New include. (setup_alternate_signal_stack): New function. (captured_main): Call the above. * cp-support.c (signal.h): New include. (catch_demangler_crashes): New flag. (SIGJMP_BUF): New define. (SIGSETJMP): Likewise. (SIGLONGJMP): Likewise. (gdb_demangle_jmp_buf): New static global. (gdb_demangle_attempt_core_dump): Likewise. (gdb_demangle_signal_handler): New function. (gdb_demangle): If catch_demangler_crashes is set, install the above signal handler before calling bfd_demangle, and restore the original signal handler afterwards. Display the offending symbol and call demangler_warning the first time a segmentation fault is caught. (_initialize_cp_support): New maint set/show command. gdb/doc/ 2014-06-19 Gary Benson <gbenson@redhat.com> * gdb.texinfo (Maintenance Commands): Document new "maint set/show catch-demangler-crashes" option.
2014-06-01guile: Allow compilation with Guile <= 2.0.5.Ludovic Courtès1-0/+3
gdb/ 2014-06-01 Ludovic Courtès <ludo@gnu.org> * configure.ac: When Guile is available, check for the availability of 'scm_new_smob'. * configure, config.h.in: Regenerate. * guile/guile-internal.h (scm_new_smob) [!HAVE_SCM_NEW_SMOB]: New function.
2014-02-09Add Guile as an extension language.Doug Evans1-0/+3
* NEWS: Mention Guile scripting. * Makefile.in (SUBDIR_GUILE_OBS): New variable. (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables. (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS. (CLIBS): Add GUILE_LIBS. (install-guile): New rule. (guile.o): New rule. (scm-arch.o, scm-auto-load.o, scm-block.o): New rules. (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules. (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules. (scm-math.o, scm-objfile.o, scm-ports.o): New rules. (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules. (scm-string.o, scm-symbol.o, scm-symtab.o): New rules. (scm-type.o, scm-utils.o, scm-value.o): New rules. * configure.ac: New option --with-guile. * configure: Regenerate. * config.in: Regenerate. * auto-load.c: Remove #include "python/python.h". Add #include "gdb/section-scripts.h". (source_section_scripts): Handle Guile scripts. (_initialize_auto_load): Add name of Guile objfile script to scripts-directory help text. * breakpoint.c (condition_command): Tweak comment to include Scheme. * breakpoint.h (gdbscm_breakpoint_object): Add forward decl. (struct breakpoint): New member scm_bp_object. * defs.h (enum command_control_type): New value guile_control. * cli/cli-cmds.c: Remove #include "python/python.h". Add #include "extension.h". (show_user): Update comment. (_initialize_cli_cmds): Update help text for "show user". Update help text for max-user-call-depth. * cli/cli-script.c: Remove #include "python/python.h". Add #include "extension.h". (multi_line_command_p): Add guile_control. (print_command_lines): Handle guile_control. (execute_control_command, recurse_read_control_structure): Ditto. (process_next_line): Recognize "guile" commands. * disasm.c (gdb_disassemble_info): Make non-static. * disasm.h: #include "dis-asm.h". (struct gdbarch): Add forward decl. (gdb_disassemble_info): Declare. * extension.c: #include "guile/guile.h". (extension_languages): Add guile. (get_ext_lang_defn): Handle EXT_LANG_GDB. * extension.h (enum extension_language): New value EXT_LANG_GUILE. * gdbtypes.c (get_unsigned_type_max): New function. (get_signed_type_minmax): New function. * gdbtypes.h (get_unsigned_type_max): Declare. (get_signed_type_minmax): Declare. * guile/README: New file. * guile/guile-internal.h: New file. * guile/guile.c: New file. * guile/guile.h: New file. * guile/scm-arch.c: New file. * guile/scm-auto-load.c: New file. * guile/scm-block.c: New file. * guile/scm-breakpoint.c: New file. * guile/scm-disasm.c: New file. * guile/scm-exception.c: New file. * guile/scm-frame.c: New file. * guile/scm-gsmob.c: New file. * guile/scm-iterator.c: New file. * guile/scm-lazy-string.c: New file. * guile/scm-math.c: New file. * guile/scm-objfile.c: New file. * guile/scm-ports.c: New file. * guile/scm-pretty-print.c: New file. * guile/scm-safe-call.c: New file. * guile/scm-string.c: New file. * guile/scm-symbol.c: New file. * guile/scm-symtab.c: New file. * guile/scm-type.c: New file. * guile/scm-utils.c: New file. * guile/scm-value.c: New file. * guile/lib/gdb.scm: New file. * guile/lib/gdb/boot.scm: New file. * guile/lib/gdb/experimental.scm: New file. * guile/lib/gdb/init.scm: New file. * guile/lib/gdb/iterator.scm: New file. * guile/lib/gdb/printing.scm: New file. * guile/lib/gdb/types.scm: New file. * data-directory/Makefile.in (GUILE_SRCDIR): New variable. (VPATH): Add $(GUILE_SRCDIR). (GUILE_DIR): New variable. (GUILE_INSTALL_DIR, GUILE_FILES): New variables. (all): Add stamp-guile dependency. (stamp-guile): New rule. (clean-guile, install-guile, uninstall-guile): New rules. (install-only): Add install-guile dependency. (uninstall): Add uninstall-guile dependency. (clean): Add clean-guile dependency. doc/ * Makefile.in (GDB_DOC_FILES): Add guile.texi. * gdb.texinfo (Auto-loading): Add set/show auto-load guile-scripts. (Extending GDB): New menu entries Guile, Multiple Extension Languages. (Guile docs): Include guile.texi. (objfile-gdbdotext file): Add objfile-gdb.scm. (dotdebug_gdb_scripts section): Mention Guile scripts. (Multiple Extension Languages): New node. * guile.texi: New file. testsuite/ * configure.ac (AC_OUTPUT): Add gdb.guile. * configure: Regenerate. * lib/gdb-guile.exp: New file. * lib/gdb.exp (get_target_charset): New function. * gdb.base/help.exp: Update expected output from "apropos apropos". * gdb.guile/Makefile.in: New file. * gdb.guile/guile.exp: New file. * gdb.guile/scm-arch.c: New file. * gdb.guile/scm-arch.exp: New file. * gdb.guile/scm-block.c: New file. * gdb.guile/scm-block.exp: New file. * gdb.guile/scm-breakpoint.c: New file. * gdb.guile/scm-breakpoint.exp: New file. * gdb.guile/scm-disasm.c: New file. * gdb.guile/scm-disasm.exp: New file. * gdb.guile/scm-equal.c: New file. * gdb.guile/scm-equal.exp: New file. * gdb.guile/scm-error.exp: New file. * gdb.guile/scm-error.scm: New file. * gdb.guile/scm-frame-args.c: New file. * gdb.guile/scm-frame-args.exp: New file. * gdb.guile/scm-frame-args.scm: New file. * gdb.guile/scm-frame-inline.c: New file. * gdb.guile/scm-frame-inline.exp: New file. * gdb.guile/scm-frame.c: New file. * gdb.guile/scm-frame.exp: New file. * gdb.guile/scm-generics.exp: New file. * gdb.guile/scm-gsmob.exp: New file. * gdb.guile/scm-iterator.c: New file. * gdb.guile/scm-iterator.exp: New file. * gdb.guile/scm-math.c: New file. * gdb.guile/scm-math.exp: New file. * gdb.guile/scm-objfile-script-gdb.in: New file. * gdb.guile/scm-objfile-script.c: New file. * gdb.guile/scm-objfile-script.exp: New file. * gdb.guile/scm-objfile.c: New file. * gdb.guile/scm-objfile.exp: New file. * gdb.guile/scm-ports.exp: New file. * gdb.guile/scm-pretty-print.c: New file. * gdb.guile/scm-pretty-print.exp: New file. * gdb.guile/scm-pretty-print.scm: New file. * gdb.guile/scm-section-script.c: New file. * gdb.guile/scm-section-script.exp: New file. * gdb.guile/scm-section-script.scm: New file. * gdb.guile/scm-symbol.c: New file. * gdb.guile/scm-symbol.exp: New file. * gdb.guile/scm-symtab-2.c: New file. * gdb.guile/scm-symtab.c: New file. * gdb.guile/scm-symtab.exp: New file. * gdb.guile/scm-type.c: New file. * gdb.guile/scm-type.exp: New file. * gdb.guile/scm-value-cc.cc: New file. * gdb.guile/scm-value-cc.exp: New file. * gdb.guile/scm-value.c: New file. * gdb.guile/scm-value.exp: New file. * gdb.guile/source2.scm: New file. * gdb.guile/types-module.cc: New file. * gdb.guile/types-module.exp: New file.
2013-11-18don't check for stddef.hTom Tromey1-3/+0
gdb already unconditionally includes stddef.h in many places. I think there is no reason to check for its existence. Also, Zack Weinberg's header file survey agrees: http://hacks.owlfolio.org/header-survey/ This patch removes the configure check and the inclusion guards. It also removes a redundant inclusion that I noticed in defs.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't check for stddef.h. * defs.h: Unconditionally include stddef.h. Remove duplicate inclusion.
2013-11-18remove gdb_dirent.hTom Tromey1-15/+0
This removes gdb_dirent.h and updates the code to use dirent.h instead. It also removes the now-useless configure checks. 2013-11-18 Tom Tromey <tromey@redhat.com> * common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT. * common/gdb_dirent.h: Remove. * common/filestuff.c: Use dirent.h. * common/linux-osdata.c: Use dirent.h. (NAMELEN): Define. * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT. * linux-fork.c: Use dirent.h * linux-nat.c: Use dirent.h. * nto-procfs.c: Use dirent.h. * procfs.c: Use dirent.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT.
2013-11-08fix a comment in configure.acTom Tromey1-2/+1
My grepping around showed that HAVE_MULTIPLE_PROC_FDS is only ever mentioned in a comment in configure.ac. Since the macro is long dead, let's remove the last mention. 2013-11-08 Tom Tromey <tromey@redhat.com> * configure: Rebuild. * configure.ac: Remove mentions of HAVE_MULTIPLE_PROC_FDS.
2013-11-08gdb configure updatesTom Tromey1-23/+0
Now that the configury needed for the "common" and "target" directories is in common.m4, some code in gdb's configure.ac is redundant. I ran this script after making an "ID" file using mkid: sed -n 's/^.*\(HAVE_[A-Z0-9_]*\).*$/\1/p' config.in | while read x; do echo ===== $x gid $x | egrep -v '^(testsuite|gnulib|common|target|gdbserver)/' done This finds all the spots using HAVE_ defines, and, more importantly, makes it clear which defines aren't used in the main parts of gdb. From this I came up with this patch to remove all the unused bits. There are a few that are subtly used -- for example the configure script sometimes checks internal configure cache variables, meaning some checks cannot be removed. 2013-11-08 Tom Tromey <tromey@redhat.com> * configure, config.in: Rebuild. * configure.ac: Remove unused configury.
2013-11-08remove link.h checksTom Tromey1-21/+0
The removal of solib-sunos.c also removed the last user of various macros defined by configure. This patch removes the corresponding configure code. 2013-11-08 Tom Tromey <tromey@redhat.com> * configure, config.in: Rebuild. * configure.ac: Remove all link.h-related checks.
2013-08-22 Unify ptrace options discovery code and make both GDB andLuis Machado1-0/+3
gdbserver use it. gdb/ * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-nat.h and nat/linux-waitpid.h. (linux-waitpid.o): New object file rule. * common/linux-ptrace.c: Include nat/linux-waitpid.h. (current_ptrace_options): Moved from linux-nat.c. (linux_ptrace_test_ret_to_nx): Use type casts for ptrace parameters. (linux_fork_to_function): New function. (linux_grandchild_function): Likewise. (linux_child_function): Likewise. (linux_check_ptrace_features): New function, heavily based on linux-nat.c:linux_test_for_tracefork. (linux_enable_event_reporting): New function. (ptrace_supports_feature): Likewise. (linux_supports_tracefork): Likewise. (linux_supports_traceclone): Likewise. (linux_supports_tracevforkdone): Likewise. (linux_supports_tracesysgood): Likewise. * common/linux-ptrace.h (HAS_NOMMU): Moved from gdbserver/linux-low.c. (linux_enable_event_reporting): New declaration. (linux_supports_tracefork): Likewise. (linux_supports_traceclone): Likewise. (linux_supports_tracevforkdone): Likewise. (linux_supports_tracesysgood): Likewise. * config.in (PTRACE_TYPE_ARG4): Regenerate. * config/aarch64/linux.mh (NATDEPFILES): Add linux-waitpid.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise.. * config/powerpc/linux.mh (NATDEPFILES): Likewise.. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. * configure.ac (AC_CACHE_CHECK): Add void * to the list of ptrace's 4th argument's types. Check the type of PTRACE_TYPE_ARG4. * configure: Regenerate. * linux-nat.c: Include nat/linux-nat.h and nat/linux-waitpid.h. (SYSCALL_SIGTRAP): Moved to nat/linux-nat.h. (linux_supports_tracefork_flag): Remove. (linux_supports_tracesysgood_flag): Likewise. (linux_supports_tracevforkdone_flag): Likewise. (current_ptrace_options): Moved to common/linux-ptrace.c. (linux_tracefork_child): Remove. (my_waitpid): Remove. (linux_test_for_tracefork): Renamed to linux_check_ptrace_features and moved to common/linux-ptrace.c. (linux_test_for_tracesysgood): Remove. (linux_supports_tracesysgood): Remove. (linux_supports_tracefork): Remove. (linux_supports_tracevforkdone): Remove. (linux_enable_tracesysgood): Remove. (linux_enable_event_reporting): Remove. (linux_init_ptrace): New function. (linux_child_post_attach): Call linux_init_ptrace. (linux_child_post_startup_inferior): Call linux_init_ptrace. (linux_child_follow_fork): Call linux_supports_tracefork and linux_supports_tracevforkdone. (linux_child_insert_fork_catchpoint): Call linux_supports_tracefork. (linux_child_insert_vfork_catchpoint): Likewise. (linux_child_set_syscall_catchpoint): Call linux_supports_tracesysgood. (lin_lwp_attach_lwp): Call linux_supports_tracefork. * nat/linux-nat.h: New file. * nat/linux-waitpid.c: New file. * nat/linux-waitpid.h: New file. gdb/gdbserver/ * Makefile.in: Explain why ../target and ../nat are not listed as include file search paths. (linux-waitpid.o): New object file rule. * configure.srv (srv_native_linux_obj): New variable. Replace all occurrences of linux native object files with $srv_native_linux_obj. * linux-low.c: Include nat/linux-nat.h and nat/linux-waitpid.h. (HAS_NOMMU): Move defining logic to common/linux-ptrace.c. (linux_enable_event_reporting): Remove declaration. (my_waitpid): Moved to common/linux-waitpid.c. (linux_wait_for_event): Pass ptid when calling linux_enable_event_reporting. (linux_supports_tracefork_flag): Remove. (linux_enable_event_reporting): Likewise. (linux_tracefork_grandchild): Remove. (STACK_SIZE): Moved to common/linux-ptrace.c. (linux_tracefork_child): Remove. (linux_test_for_tracefork): Remove. (linux_look_up_symbols): Call linux_supports_traceclone. (initialize_low): Remove call to linux_test_for_tracefork. * linux-low.h (PTRACE_TYPE_ARG3): Move to common/linux-ptrace.h. (PTRACE_TYPE_ARG4): Likewise. Include linux-ptrace.h.
2013-08-072013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>Ulrich Weigand1-0/+3
Ulrich Weigand <uweigand@de.ibm.com> * gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64 is defined. * rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb. (rs6000_ptrace32): Call ptrace64 instead of ptrace if present. (rs6000_ptrace64): Call ptace64 instead of ptracex if present. * configure.ac: Check for ptrace64. * configure, config.in: Regenerate.
2013-07-01Reimplement DJGPP's .gdbinit -> gdb.ini renaming.Pedro Alves1-0/+3
This simplifies the .gdbinit filename selection logic. We have a GDBINIT_FILENAME define that supposedly configurations would override, but none do so. Instead, the only configuration that wants a different file name instead of ".gdbinit", djgpp, does a strcpy over the gdbinit global array. This means the array needs to be sized, and the code that does that is doing the usual 'PATH_MAX/FILENAME_MAX/fallback constant/etc.' mess. Instead of all that, it's much simpler to have configure specificy the .gdbinit filename. As bonus, we can then make the "gdbinit" global array const. gdb/ 2013-07-01 Pedro Alves <palves@redhat.com> * configure.ac (GDBINIT): Define, depending on host. * go32-nat.c (init_go32_ops): Don't override gdbinit here. * top.c (PATH_MAX): Delete fallback definition. (GDBINIT_FILENAME): Delete. (gdbinit): Reimplement as const char array set to the GDBINIT string constant. * top.h (gdbinit): Make const.
2013-05-23common/filestuff.c: No sockets on DJGPP.Pedro Alves1-0/+3
Building gdb with --host=i586-pc-msdosdjgpp ends up with: i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c ../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory There are no sockets on djgpp. This #ifdef's out the bits in the file that use sockets, depending on whether winsock or sys/socket.h is available. As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split into separate files, and which to use is selected by configure.ac: dnl Figure out which of the many generic ser-*.c files the _host_ supports. SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o" case ${host} in *go32* ) SER_HARDWIRE=ser-go32.o ;; *djgpp* ) SER_HARDWIRE=ser-go32.o ;; *mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;; esac AC_SUBST(SER_HARDWIRE) ... I considered splitting filestuff.c similarly. But I quickly gave up on the idea, as it looked like a lot more complication over this approach, for no real gain. Plus, there are uses of these functions outside the ser*.c framework. gdbserver's configure.ac is already checking for sys/socket.h. gdb/ 2013-05-23 Pedro Alves <palves@redhat.com> * common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS. [HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS. (socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec): Only define if HAVE_SOCKETS is defined. * configure.ac: Check for sys/socket.h. * config.in, configure: Regenerate.
2013-04-22 PR gdb/7912:Tom Tromey1-3/+6
* Makefile.in (SFILES): Add filestuff.c (COMMON_OBS): Add filestuff.o. (filestuff.o): New target. * auto-load.c (auto_load_objfile_script_1): Use gdb_fopen_cloexec. * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec. * cli/cli-cmds.c (shell_escape): Call close_most_fds. * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec. * common/agent.c (gdb_connect_sync_socket): Use gdb_socket_cloexec. * common/filestuff.c: New file. * common/filestuff.h: New file. * common/linux-osdata.c (linux_common_core_of_thread) (command_from_pid, commandline_from_pid, print_source_lines) (linux_xfer_osdata_shm, linux_xfer_osdata_sem) (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use gdb_fopen_cloexec. * common/linux-procfs.c (linux_proc_get_int) (linux_proc_pid_has_state): Use gdb_fopen_cloexec. * config.in, configure: Rebuild. * configure.ac: Don't check for sys/socket.h. Check for fdwalk, pipe2. * corelow.c (core_open): Use gdb_open_cloexec. * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec. * fork-child.c (fork_inferior): Call close_most_fds. * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec. * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec. * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals): Use gdb_fopen_cloexec. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use gdb_open_cloexec. (linux_async_pipe): Use gdb_pipe_cloexec. * remote-fileio.c (remote_fileio_func_open): Use gdb_open_cloexec. * remote.c (remote_file_put, remote_file_get): Use gdb_fopen_cloexec. * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec, close_most_fds. * ser-tcp.c (net_open): Use gdb_socket_cloexec. * ser-unix.c (hardwire_open): Use gdb_open_cloexec. * solib.c (solib_find): Use gdb_open_cloexec. * source.c (openp, find_and_open_source): Use gdb_open_cloexec. * tracepoint.c (tfile_start): Use gdb_fopen_cloexec. (tfile_open): Use gdb_open_cloexec. * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec. * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec. * xml-support.c (xml_fetch_content_from_file): Use gdb_fopen_cloexec. * main.c (captured_main): Call notice_open_fds. gdbserver * Makefile.in (SFILES): Add filestuff.c. (OBS): Add filestuff.o. (filestuff.o): New target. * config.in, configure: Rebuild. * configure.ac: Check for fdwalk, pipe2.
2013-04-12gdb/Jan Kratochvil1-1/+1
* config.in: Regenerate.
2013-04-10gdb/Yao Qi1-0/+3
2013-04-10 Hui Zhu <hui@codesourcery.com> Yao Qi <yao@codesourcery.com> * configure.ac: Check libbabeltrace is installed. * config.in: Regenerate. * configure: Regenerate. * Makefile.in (LIBBABELTRACE): New. (CLIBS): Add LIBBABELTRACE. * ctf.c: Include "exec.h". (CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros. (CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros. (ctf_save_metadata_header): Define new type aliases in metadata. (ctf_write_header): Define event type "tsv_def" and "tp_def" in metadata. Start a new faked packet for trace status. (ctf_write_status): Write trace status to CTF. (ctf_write_uploaded_tsv): Write TSV to CTF. (ctf_write_uploaded_tp): Write tracepoint definition to CTF. (ctf_write_definition_end): End the faked packet. (ctx, ctf_iter, trace_dirname): New. (start_pos): New variable. (ctf_destroy, ctf_open_dir, ctf_open): New. (SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New macros. (ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New. (ctf_fetch_registers, ctf_xfer_partial): New. (ctf_get_trace_state_variable_value): New. (ctf_get_tpnum_from_frame_event): New. (ctf_get_traceframe_address): New. (ctf_trace_find, ctf_has_stack): New. (ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New. (ctf_get_trace_status, ctf_read_status): New. (_initialize_ctf): New. * tracepoint.c (get_tracepoint_number): New (get_uploaded_tsv): Remove 'static'. (struct traceframe_info, trace_regblock_size): Move it to ... * tracepoint.h: ... here. (get_tracepoint_number): Declare it. (get_uploaded_tsv): Declare it. * NEWS: Mention new configure option. gdb/doc/ 2013-04-10 Yao Qi <yao@codesourcery.com> * gdb.texinfo (Trace Files): Add "target ctf". gdb/testsuite/ 2013-04-10 Yao Qi <yao@codesourcery.com> * gdb.trace/actions.exp: Save trace data to CTF. Change to ctf target if GDB supports, read CTF data in ctf target, and check the actions of tracepoints. * gdb.trace/while-stepping.exp: Likewise. * gdb.trace/report.exp: Test GDB saves trace data to CTF format and read CTF trace file if GDB supports. * gdb.trace/tstatus.exp: Save trace data to CTF. If ctf target is supported, change to ctf target, read trace data and check output of command "tstatus". * gdb.trace/tsv.exp: Save trace frame to CTF. If GDB supports, read CTF data by target ctf and call check_tsv.
2012-12-09gdb/Jan Kratochvil1-3/+0
* configure.ac (CC_HAS_LONG_LONG): Replace by AC_MSG_ERROR. * defs.h (LONGEST, ULONGEST): Remove conditionalization for CC_HAS_LONG_LONG. * dwarf2-frame.c (DW64_CIE_ID): Likewise. * dwarf2read.c (extract_cu_value): Remove the function. (create_cus_from_index_list): Make the return type void, inline the extract_cu_value caller, include new gdb_static_assert. (create_cus_from_index): Make the return type void, update the function comment, update the create_cus_from_index_list caller. (create_signatured_type_table_from_index): Make the return type void, inline the extract_cu_value caller, include new gdb_static_assert. (dwarf2_read_index): Update the create_cus_from_index and create_signatured_type_table_from_index caller. * printcmd.c (ui_printf): Remove conditionalizations for CC_HAS_LONG_LONG. * config.in: Regenerate. * configure: Regenerate. gdb/doc/ * gdbint.texinfo (Host Definition): Remove CC_HAS_LONG_LONG.
2012-11-282012-11-28 Markus Metzger <markus.t.metzger@intel.com>Markus Metzger1-0/+3
gdb/ * configure.ac: Check for linux/perf_event.h. * config.in: Regenerated. * configure: Regenerated. gdb/gdbserver/ * configure.ac: Check for linux/perf_event.h. * config.in: Regenerated. * configure: Regenerated.
2012-11-262012-11-26 Alexander Larsson <alexl@redhat.com>Tom Tromey1-0/+3
Jan Kratochvil <jan.kratochvil@redhat.com> Tom Tromey <tromey@redhat.com> * NEWS: Mention mini debuginfo feature. * minidebug.c: New file. * configure.ac: Check for lzma. * configure, config.in: Rebuild. * Makefile.in (LIBLZMA): New variable. (CLIBS): Include LIBLZMA. (SFILES): Mention minidebug.c. (COMMON_OBS): Mention minidebug.o. * symfile.c (read_symbols): New function. (syms_from_objfile, reread_symbols): Call it. * symfile.h (find_separate_debug_file_in_section): Declare. doc * gdb.texinfo (MiniDebugInfo): New node. (GDB Files): Update. testsuite * gdb.base/gnu-debugdata.exp: New file. * gdb.base/gnu-debugdata.c: New file. * lib/gdb.exp (gdb_file_cmd): Handle LZMA warning. (gdb_unload): Return 0 on success.
2012-11-15 * configure.ac (AC_HEADER_STAT): Remove.Pierre Muller1-3/+0
* gdb_stat.h (STAT_MACROS_BROKEN): Remove macro use and corresponding code. * configure: Regenerate. * config.in: Regenerate.
2012-11-14 * configure, config.in: Rebuild.Tom Tromey1-6/+0
* configure.ac: Don't check for ctype.h, time.h. * expprint.c: Don't use HAVE_CTYPE_H.
2012-07-02gdb/Jan Kratochvil1-3/+0
* config.in: Regenerate. * configure: Regenerate. * configure.ac: Remove check for gnu/libc-version.h. * linux-thread-db.c <HAVE_GNU_LIBC_VERSION_H>: Remove include of gnu/libc-version.h. (enable_thread_event_reporting) <HAVE_GNU_LIBC_VERSION_H>: Remove variables libc_version, libc_major and libc_minor. Replace sscanf by inferior_has_bug. Extend the comment.
2012-06-26Use PTRACE_PEEKUSER to get fs_base/gs_baseH.J. Lu1-0/+6
* amd64-linux-nat.c: Include <sys/user.h>. (ps_get_thread_area): Use PTRACE_PEEKUSER to get fs_base/gs_base if HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE or HAVE_STRUCT_USER_REGS_STRUCT_GS_BASE is defined. * configure.ac: Check if the fs_base and gs_base members of `struct user_regs_struct' exist. * config.in: Regenerated. * configure: Likewise.
2012-06-01gdb/Jan Kratochvil1-0/+3
* configure.ac (development): Define new variable. Call AC_CHECK_LIB for mcheck if $development. (ERROR_ON_WARNING): Enable it by default only if $development. * config.in: Regenerate. * configure: Regenerate.
2012-05-11gdb/Jan Kratochvil1-0/+3
Implement multi-component --with-auto-load-dir. * NEWS (set auto-load scripts-directory, --with-auto-load-dir): New entries. (--with-auto-load-safe-path): Update the default value description. * auto-load.c (auto_load_dir, set_auto_load_dir, show_auto_load_dir): New. (auto_load_objfile_script): Add DEBUG_AUTO_LOAD output. Remove GDB_DATADIR NULL check. Replace GDB_DATADIR/auto-load by AUTO_LOAD_DIR. Support $ddir and multiple components in it. (_initialize_auto_load): Initialize also auto_load_dir. Install new "set auto-load scripts-directory". * config.in: Regenerate. * configure: Regenerate. * configure.ac (--with-auto-load-dir): New configure option. (--auto-load-safe-path): Change the default to --with-auto-load-dir. gdb/doc/ Implement multi-component --with-auto-load-dir. * gdb.texinfo (Auto-loading): New references for 'set auto-load scripts-directory' and 'show auto-load scripts-directory'. (Auto-loading safe path): Describe the new default. Move $ddir substituation reference to 'objfile-gdb.py file'. (objfile-gdb.py file): Describe script-name alias. Change real-name to script-name. Describe new 'set auto-load scripts-directory' and 'show auto-load scripts-directory'.
2012-05-11gdb/Jan Kratochvil1-3/+3
Provide $ddir substitution for --with-auto-load-safe-path. * NEWS (--with-auto-load-safe-path, --without-auto-load-safe-path): New entries. * auto-load.c: Include observer.h. (auto_load_safe_path_vec_update): Call substitute_path_component for each component. New variable ddir_subst. (auto_load_gdb_datadir_changed): New function. (set_auto_load_safe_path): Rename DEFAULT_AUTO_LOAD_SAFE_PATH to AUTO_LOAD_SAFE_PATH. New comment. (_initialize_auto_load): Rename DEFAULT_AUTO_LOAD_SAFE_PATH to AUTO_LOAD_SAFE_PATH. Install auto_load_gdb_datadir_changed. * config.in: Regenerate. * configure: Regenerate. * configure.ac (--auto-load-safe-path): Rename DEFAULT_AUTO_LOAD_SAFE_PATH to AUTO_LOAD_SAFE_PATH. Default to GDB_DATADIR/auto-load. * defs.h (substitute_path_component): New declaration. * top.c: Include observer.h. (set_gdb_datadir): New function. (init_main): Install it for "set data-directory". * utils.c (substitute_path_component): New function. gdb/doc/ Provide $ddir substitution for --with-auto-load-safe-path. * gdb.texinfo (Auto-loading): Replace /usr/local by $ddir/auto-load. (Auto-loading safe path): Likewise. Mention the default value, $ddir substitution, --with-auto-load-safe-path and --without-auto-load-safe-path. * observer.texi (gdb_datadir_changed): New.
2012-04-192012-04-19 Pedro Alves <palves@redhat.com>Pedro Alves1-260/+23
gdb/ * Makefile.in (GNULIB_BUILDDIR): New. (LIBGNU, INCGNU, GNULIB_H): Adjust. (SUBDIRS): Add $(GNULIB_BUILDDIR). (CLEANDIRS). Remove gnulib/import. (REQUIRED_SUBDIRS): Replace gnulib/import with $(GNULIB_BUILDDIR). (all-lib): Ditto. (distclean): Remove the $(GNULIB_BUILDDIR) directory. (gnulib/import/Makefile): Replace gnulib/import with $(GNULIB_BUILDDIR). Set CONFIG_FILES to just Makefile. (ACLOCAL_AMFLAGS): Remove '-I gnulib/import/m4'. (aclocal_m4_deps): Remove the gnulib dependencies. Add acx_configure_dir.m4. * acinclude.m4: Include acx_configure_dir.m4. * acx_configure_dir.m4: New file. * aclocal.m4: Regenerate. * configure.ac: Remove gl_EARLY, gl_INIT and AM_INIT_AUTOMAKE calls. Configure gnulib using ACX_CONFIGURE_DIR. (GNULIB): New variable. (GNULIB_STDINT_H): Adjust. (AC_OUTPUT): Don't output gnulib/Makefile. * gdb/defs.h: Include build-gnulib/config.h. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate. * gnulib/Makefile.in: New file. * gnulib/configure.ac: New file. * gnulib/aclocal.m4: New file. * gnulib/config.in: New file. * gnulib/configure: New file. * gnulib/: Re-run gnulib-tool to adjust. gdb/gdbserver/ * Makefile.in (GNULIB_BUILDDIR): New. (LIBGNU, INCGNU, GNULIB_H): Adjust. (SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): New. (all, install-only, uninstall, clean-info, all-lib, clean): No longer pass GNULIB_FLAGS_TO_PASS. Use subdir_do. (maintainer-clean realclean distclean): Use subdir_do. (subdir_do): New. (gnulib/import/Makefile): Adjust. Replace gnulib/import with $(GNULIB_BUILDDIR). Don't pass argument to config.status. * acinclude.m4: Include acx_configure_dir.m4. * configure.ac: Remove gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE calls. Call AC_PROG_RANLIB. Configure gnulib using ACX_CONFIGURE_DIR. (GNULIB): New. (GNULIB_STDINT_H): Adjust. (AC_OUTPUT): Don't output gnulib/Makefile anymore. * gdbreplay.c: Include build-gnulib/config.h. * server.h: Likewise. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate.
2012-04-182012-04-18 Pedro Alves <palves@redhat.com>Pedro Alves1-72/+43
Update gnulib from latest git. (639ea5ae15e39fe48d43e04864b2997301e4b969) * gnulib/Makefile.am: Update. * gnulib/dummy.c: Update. * gnulib/extra/arg-nonnull.h: Update. * gnulib/extra/c++defs.h: Update. * gnulib/extra/update-copyright: Update. * gnulib/extra/warn-on-use.h: Update. * gnulib/inttypes.in.h: Update. * gnulib/m4/00gnulib.m4: Update. * gnulib/m4/extensions.m4: Update. * gnulib/m4/gnulib-cache.m4: Update. * gnulib/m4/gnulib-common.m4: Update. * gnulib/m4/gnulib-comp.m4: Update. * gnulib/m4/gnulib-tool.m4: Update. * gnulib/m4/include_next.m4: Update. * gnulib/m4/inttypes-pri.m4: Update. * gnulib/m4/inttypes.m4: Update. * gnulib/m4/longlong.m4: Update. * gnulib/m4/memchr.m4: Update. * gnulib/m4/memmem.m4: Update. * gnulib/m4/mmap-anon.m4: Update. * gnulib/m4/multiarch.m4: Update. * gnulib/m4/onceonly.m4: Update. * gnulib/m4/stddef_h.m4: Update. * gnulib/m4/stdint.m4: Update. * gnulib/m4/string_h.m4: Update. * gnulib/m4/warn-on-use.m4: Update. * gnulib/m4/wchar_h.m4: Update. * gnulib/m4/wchar_t.m4: Update. * gnulib/m4/wint_t.m4: Update. * gnulib/memchr.c: Update. * gnulib/memmem.c: Update. * gnulib/stddef.in.h: Update. * gnulib/stdint.in.h: Update. * gnulib/str-two-way.h: Update. * gnulib/string.in.h: Update. * gnulib/wchar.in.h: Update. * gnulib/extra/arg-nonnull.h: Delete. * gnulib/extra/c++defs.h: Delete. * gnulib/extra/warn-on-use.h: Delete. * gnulib/m4/wchar_h.m4: Delete. * gnulib/m4/wint_t.m4: Delete. * gnulib/wchar.in.h: Delete. * gnulib/extra/snippets/arg-nonnull.h: New. * gnulib/extra/snippets/c++defs.h: New. * gnulib/extra/snippets/warn-on-use.h: New. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate. * gnulib/Makefile.in: Regenerate. * gdbserver/aclocal.m4: Regenerate. * gdbserver/config.in: Regenerate. * gdbserver/configure: Regenerate.
2012-04-17gdb/Jan Kratochvil1-0/+3
New option "set auto-load safe-path". * NEWS: New commands "set auto-load safe-path" and "show auto-load safe-path". * auto-load.c: Include gdb_vecs.h, readline/tilde.h and completer.h. (auto_load_safe_path, auto_load_safe_path_vec) (auto_load_safe_path_vec_update, set_auto_load_safe_path) (show_auto_load_safe_path, add_auto_load_safe_path, filename_is_in_dir) (filename_is_in_auto_load_safe_path_vec, file_is_auto_load_safe): New. (source_gdb_script_for_objfile): New variable is_safe. Call file_is_auto_load_safe. Return if it is not. (struct loaded_script): New field loaded. (maybe_add_script): Add parameter loaded. Initialize SLOT with it. (print_script): Use LOADED indicator instead of FULL_PATH. Change output "Missing" to "No". (_initialize_auto_load): New variable cmd. Initialize auto_load_safe_path. Register "set auto-load safe-path", "show auto-load safe-path" and "add-auto-load-safe-path". * auto-load.h (maybe_add_script): Add parameter loaded. (file_is_auto_load_safe): New declaration. * config.in: Regenerate. * configure: Regenerate. * configure.ac: New parameters --with-auto-load-safe-path and --without-auto-load-safe-path. * linux-thread-db.c (try_thread_db_load_from_pdir_1) (try_thread_db_load_from_dir): Check file_is_auto_load_safe first. * main.c (captured_main): Check file_is_auto_load_safe for LOCAL_GDBINIT. * python/py-auto-load.c (gdbpy_load_auto_script_for_objfile): New variable is_safe. Call file_is_auto_load_safe. Return if it is not. (source_section_scripts): Call file_is_auto_load_safe. Return if it is not. gdb/doc/ New option "set auto-load safe-path". * gdb.texinfo (Auto-loading): Extend the "show auto-load" and "info auto-load" examples for safe-path. Put there also references for "set auto-load safe-path" and "show auto-load safe-path". New menu item for Auto-loading safe path. (Auto-loading safe path): New node. (Python Auto-loading): Update the expected output from "Missing" to "No". gdb/testsuite/ New option "set auto-load safe-path". * gdb.python/py-objfile-script.exp (set auto-load safe-path): New. * gdb.python/py-section-script.exp (set auto-load safe-path): New.
2012-04-14gdb/Yao Qi1-0/+41
Import gnulib module inttypes from git (250b80067c1e1d8faa0c42fb572f721975b929c5) * Makefile.in (HFILES_NO_SRCDIR): Add gnulib/inttypes.in.h. (aclocal_m4_deps): Add gnulib/m4/inttypes.m4 and gnulib/m4/inttypes-pri.m4 * aclocal.m4, config.in, configure: Regenerated. * gnulib/Makefile.am: Update. * gnulib/Makefile.in: Update. * gnulib/m4/gnulib-cache.m4: Update. * gnulib/m4/gnulib-comp.m4: Update. * gnulib/inttypes.in.h: New. * gnulib/m4/inttypes-pri.m4: New. * gnulib/m4/inttypes.m4: New. gdb/gdbserver/ Import gnulib module inttypes. * aclocal.m4, config.in, configure: Regenerated.
2012-03-08gdb/Jan Kratochvil1-3/+0
* libunwind-frame.c: Rename to ... * ia64-libunwind-tdep.c: ... here. * libunwind-frame.h: Rename to ... * ia64-libunwind-tdep.h: ... here. * Makefile.in (HFILES_NO_SRCDIR): Rename libunwind-frame.h to ia64-libunwind-tdep.h. (ALLDEPFILES): Rename libunwind-frame.c to ia64-libunwind-tdep.c. * README (--with-libunwind): Rename to ... (--with-libunwind-ia64): ... here, note it is ia64 specific now. * config.in: Regenerate. * configure: Regenerate. * configure.ac: New option --with-libunwind-ia64, make the AS_HELP_STRING ia64 specific. Deprecate option --with-libunwind. Remove AC_DEFINE for HAVE_LIBUNWIND. * ia64-libunwind-tdep.c: Make the file top comment ia64 specific. Rename libunwind-frame.h #include to ia64-libunwind-tdep.h. Rename libunwind-frame in the general comment. * ia64-libunwind-tdep.h: Make the file top comment ia64 specific. Rename symbol LIBUNWIND_FRAME_H to IA64_TDEP_LIBUNWIND_FRAME_H. Move forward declarations inside #ifndef. Rename libunwind-frame in the general comment. * ia64-tdep.c: Rename libunwind-frame.h #include to ia64-libunwind-tdep.h. (ia64_gdb2uw_regnum, ia64_uw2gdb_regnum, ia64_is_fpreg) (ia64_libunwind_descr): Rename libunwind-frame to ia64-libunwind-tdep in these function comments. * ia64-tdep.h: Rename libunwind-frame.h #include to ia64-libunwind-tdep.h. * ia64-vms-tdep.c (ia64_vms_libunwind_descr): Rename libunwind-frame to ia64-libunwind-tdep in that data comment.
2012-03-03gdb:Yao Qi1-0/+6
* common/agent.c: New. * common/agent.h: New. * configure.ac: Add `sys/socket.h' and `sys/un.h' to AC_CHECK_HEADERS. * configure, configh.in: Regenerated. gdb/gdbserver: * Makefile.in (OBS): Add agent.o. Add new rule for agent.o. Track dependence of tracepoint.c on agent.h. * tracepoint.c (run_inferior_command_1): (run_inferior_command): Call agent_run_command. (gdb_ust_connect_sync_socket): Deleted. Move it to common/agent.c. (resume_thread, stop_thread): Likewise. (gdb_ust_socket_init): Renamed to ... (gdb_agent_socket_init): ... New. (gdb_ust_thread): Renamed to ... (gdb_agent_helper_thread): ... New. (gdb_ust_init): Move some code to ... (gdb_agent_init): ... here. New. [HAVE_UST]: Call gdb_ust_init. (initialize_tracepoint_ftlib): Call gdb_agent_init. * configure.ac: Add `sys/un.h' to AC_CHECK_HEADERS. * config.in, configure: Regenerated.
2012-02-212012-02-21 Tristan Gingold <gingold@adacore.com>Pedro Alves1-3/+0
Pedro Alves <palves@redhat.com> * ia64-tdep.c: Do not include libunwind-ia64.h. * libunwind-frame.h: Remove #ifdef HAVE_LIBUNWIND_H guard. Include libunwind-ia64.h instead of libunwind.h. * configure.ac (--with-libunwind, $enable_libunwind): Don't check for libunwind.h existence. * configure, config.in: Regenerate.
2012-01-20ChangeLog:Ulrich Weigand1-0/+3
* configure.ac [AC_CHECK_FUNCS]: Check for readlink. * config.in, configure: Regenerate. * target.h (struct target_ops): Add to_fileio_readlink. (target_fileio_readlink): Add prototype. * target.c (target_fileio_readlink): New function. * inf-child.c: Conditionally include <sys/param.h>. (inf_child_fileio_readlink): New function. (inf_child_target): Install it. * remote.c (PACKET_vFile_readlink): New enum value. (remote_hostio_readlink): New function. (init_remote_ops): Install it. (_initialize_remote): Handle vFile:readlink packet type. doc/ChangeLog: * gdb.texinfo (Remote Configuration): Document "set remote hostio-readlink-packet" command. (General Query Packets): Document vFile:readlink packet. gdbserver/ChangeLog: * hostio.c (handle_readlink): New function. (handle_vFile): Call it to handle "vFile:readlink" packets.
2012-01-202012-01-20 Pedro Alves <palves@redhat.com>Ulrich Weigand1-0/+6
Ulrich Weigand <ulrich.weigand@linaro.org> * configure.ac [AC_CHECK_FUNCS]: Check for pread and pwrite. * config.in, configure: Regenerate. * target.h (struct target_ops): Add to_fileio_open, to_fileio_pwrite, to_fileio_pread, to_fileio_close, to_fileio_unlink. (target_fileio_open): Add prototype. (target_fileio_pwrite): Likewise. (target_fileio_pread): Likewise. (target_fileio_close): Likewise. (target_fileio_unlink): Likewise. (target_fileio_read_alloc): Likewise. (target_fileio_read_stralloc): Likewise. * target.c: Include "gdb/fileio.h". (target_read_stralloc): Accept trailing, but not embedded NUL bytes. (default_fileio_target): New function. (target_fileio_open): Likewise. (target_fileio_pwrite): Likewise. (target_fileio_pread): Likewise. (target_fileio_close): Likewise. (target_fileio_unlink): Likewise. (target_fileio_close_cleanup): Likewise. (target_fileio_read_alloc_1): Likewise. (target_fileio_read_alloc): Likewise. (target_fileio_read_stralloc): Likewise. * inf-child.c: Include "gdb/fileio.h", <sys/types.h>, <sys/stat.h>, <fcntl.h>, and <unistd.h>. (inf_child_fileio_open_flags_to_host): New function. (inf_child_errno_to_fileio_error): Likewise. (inf_child_fileio_open): Likewise. (inf_child_fileio_pwrite): Likewise. (inf_child_fileio_pread): Likewise. (inf_child_fileio_close): Likewise. (inf_child_fileio_unlink): Likewise. (inf_child_target): Install to_fileio routines. * remote.c (init_remote_ops): Install to_fileio routines.
2012-01-182012-01-18 Paul Pluzhnikov <ppluzhnikov@google.com>Paul Pluzhnikov1-0/+3
Jan Kratochvil <jan.kratochvil@redhat.com> PR gdb/9538 * symfile.c (find_separate_debug_file): New function. (terminate_after_last_dir_separator): Likewise. (find_separate_debug_file_by_debuglink): Also try realpath. * configure.ac (AC_CHECK_FUNCS): Add lstat. * configure: Regenerate. * config.in: Regenerate. testsuite/ChangeLog: 2012-01-18 Paul Pluzhnikov <ppluzhnikov@google.com> PR gdb/9538 * gdb.base/sepdebug.exp: New test.
2012-01-18 * Makefile.in (TARGET_SYSTEM_ROOT, TARGET_SYSTEM_ROOT_DEFINE): Delete.Doug Evans1-0/+9
(main.o): Remove rule. * configure.ac (BINDIR): Define with AC_DEFINE_DIR. (--with-sysroot): Rewrite. * configure: Regenerate. * config.in: Regenerate.
generated by cgit v1.1 at 2024-12-23 14:22:01 +0000