| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch implements IPv6 support for both GDB and gdbserver. Based
on my research, it is the fourth attempt to do that since 2006. Since
I used ideas from all of the previous patches, I also added their
authors's names on the ChangeLogs as a way to recognize their
efforts. For reference sake, you can find the previous attempts at:
https://sourceware.org/ml/gdb-patches/2006-09/msg00192.html
https://sourceware.org/ml/gdb-patches/2014-02/msg00248.html
https://sourceware.org/ml/gdb-patches/2016-02/msg00226.html
The basic idea behind the patch is to start using the new
'getaddrinfo'/'getnameinfo' calls, which are responsible for
translating names and addresses in a protocol-independent way. This
means that if we ever have a new version of the IP protocol, we won't
need to change the code again (or, at least, won't have to change the
majority of the code).
The function 'getaddrinfo' returns a linked list of possible addresses
to connect to. Dealing with multiple addresses proved to be a hard
task with the current TCP auto-retry mechanism implemented on
ser-tcp:net_open. For example, when gdbserver listened only on an
IPv4 socket:
$ ./gdbserver --once 127.0.0.1:1234 ./a.out
and GDB was instructed to try to connect to both IPv6 and IPv4
sockets:
$ ./gdb -ex 'target extended-remote localhost:1234' ./a.out
the user would notice a somewhat big delay before GDB was able to
connect to the IPv4 socket. This happened because GDB was trying to
connect to the IPv6 socket first, and had to wait until the connection
timed out before it tried to connect to the IPv4 socket.
For that reason, I had to rewrite the main loop and implement a new
method for handling multiple connections. After some discussion,
Pedro and I agreed on the following algorithm:
1) For each entry returned by 'getaddrinfo', we try to open a socket
and connect to it.
2.a) If we have a successful 'connect', we just use that connection.
2.b) If we don't have a successfull 'connect', but if we've got a
ECONNREFUSED (meaning the the connection was refused), we keep track
of this fact by using a flag.
2.c) If we don't have a successfull 'connect', but if we've got a
EINPROGRESS (meaning that the connection is in progress), we perform
a 'select' call on the socket until we have a result (either a
successful connection, or an error on the socket).
3) If tcp_auto_retry is true, and we haven't gotten a successful
connection, and at least one of our attempts failed with
ECONNREFUSED, then we wait a little bit (i.e., call
'wait_for_connect'), check to see if there was a
timeout/interruption (in which case we bail out), and then go back
to (1).
After multiple tests, I was able to connect without delay on the
scenario described above, and was also able to connect in all other
types of scenarios.
I also implemented some hostname parsing functions (along with their
corresponding unit tests) which are used to help GDB and gdbserver to
parse hostname strings provided by the user. These new functions are
living inside common/netstuff.[ch]. I've had to do that since IPv6
introduces a new URL scheme, which defines that square brackets can be
used to enclose the host part and differentiate it from the
port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some
time thinking about a reasonable way to interpret what the user wants,
and I came up with the following:
- If the user has provided a prefix that doesn't specify the protocol
version (i.e., "tcp:" or "udp:"), or if the user has not provided
any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when
dealing with 'getaddrinfo') *unless* the host starts with "[" (in
which case, assume it's an IPv6 host).
- If the user has provided a prefix that does specify the protocol
version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect
that.
This method doesn't follow strictly what RFC 2732 proposes (that
literal IPv6 addresses should be provided enclosed in "[" and "]")
because IPv6 addresses still can be provided without square brackets
in our case, but since we have prefixes to specify protocol versions I
think this is not an issue.
Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST'
testcase parameter, which makes it possible to specify the
hostname (without the port) to be used when testing GDB and
gdbserver. For example, to run IPv6 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]'
Or, to run IPv4 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1'
This required a few changes on the gdbserver-base.exp, and also a
minimal adjustment on gdb.server/run-without-local-binary.exp.
Finally, I've implemented a new testcase,
gdb.server/server-connect.exp, which is supposed to run on the native
host and perform various "smoke tests" using different connection
methods.
This patch has been regression-tested on BuildBot and locally, and
also built using a x86_64-w64-mingw32 GCC, and no problems were found.
gdb/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
'unittests/parse-connection-spec-selftests.c'.
(COMMON_SFILES): Add 'common/netstuff.c'.
(HFILES_NO_SRCDIR): Add 'common/netstuff.h'.
* NEWS (Changes since GDB 8.2): Mention IPv6 support.
* common/netstuff.c: New file.
* common/netstuff.h: New file.
* ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'.
(wait_for_connect): Update comment. New parameter
'gdb::optional<int> sock' instead of 'struct serial *scb'.
Use 'sock' directly instead of 'scb->fd'.
(try_connect): New function, with code from 'net_open'.
(net_open): Rewrite main loop to deal with multiple
sockets/addresses. Handle IPv6-style hostnames; implement
support for IPv6 connections.
* unittests/parse-connection-spec-selftests.c: New file.
gdb/gdbserver/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'.
(OBS): Add 'common/netstuff.o'.
(GDBREPLAY_OBS): Likewise.
* gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'.
(remote_open): Implement support for IPv6
connections.
* remote-utils.c: Include 'netstuff.h', 'filestuff.h'
and 'wspiapi.h'.
(handle_accept_event): Accept connections from IPv6 sources.
(remote_prepare): Handle IPv6-style hostnames; implement
support for IPv6 connections.
(remote_open): Implement support for printing connections from
IPv6 sources.
gdb/testsuite/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST'
parameter.
* boards/native-extended-gdbserver.exp: Do not set 'sockethost'
by default.
* boards/native-gdbserver.exp: Likewise.
* gdb.server/run-without-local-binary.exp: Improve regexp used
for detecting when a remote debugging connection succeeds.
* gdb.server/server-connect.exp: New file.
* lib/gdbserver-support.exp (gdbserver_default_get_comm_port):
Do not prefix the port number with ":".
(gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement
support for detecting and using it. Add '$debughost_gdbserver'
to the list of arguments used to start gdbserver. Handle case
when gdbserver cannot resolve a network name.
gdb/doc/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* gdb.texinfo (Remote Connection Commands): Add explanation
about new IPv6 support. Add new connection prefixes.
|
|
This patch gets rid of this warning on macOS:
CXX main.o
/Users/simark/src/binutils-gdb/gdb/main.c:492:27: error: 'sbrk' is deprecated [-Werror,-Wdeprecated-declarations]
lim_at_start = (char *) sbrk (0);
^
/usr/include/unistd.h:585:1: note: 'sbrk' has been explicitly marked deprecated here
__deprecated __WATCHOS_PROHIBITED __TVOS_PROHIBITED
^
/usr/include/sys/cdefs.h:176:37: note: expanded from macro '__deprecated'
#define __deprecated __attribute__((deprecated))
^
sbrk on macOS is not useful for our purposes, since sbrk(0) always
returns the same value. From what I read, brk/sbrk on macOS is just an
emulation, it always returns a pointer in a 4MB section reserved for
that.
So instead of letting users use "maint set per-command space on" and
print silly results, I think we should just disable that feature for
this platform (as we do for platforms that don't have sbrk).
I defined a HAVE_USEFUL_SBRK macro and used that instead of HAVE_SBRK.
gdb/ChangeLog:
* common/common-defs.h (HAVE_USEFUL_SBRK): Define.
* main.c: Use HAVE_USEFUL_SBRK instead of HAVE_SBRK.
* maint.c: Likewise.
* top.c: Likewise.
|
|
Remove ptid_equal in favor of using "==".
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_equal): Remove.
* common/ptid.h (ptid_equal): Don't declare.
* ada-tasks.c: Update.
* breakpoint.c: Update.
* common/agent.c: Update.
* corelow.c: Update.
* darwin-nat-info.c: Update.
* darwin-nat.c: Update.
* dcache.c: Update.
* dtrace-probe.c: Update.
* dummy-frame.c: Update.
* fbsd-nat.c: Update.
* frame.c: Update.
* gdbthread.h: Update.
* gnu-nat.c: Update.
* go32-nat.c: Update.
* inf-loop.c: Update.
* inf-ptrace.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* inflow.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-thread-db.c: Update.
* mi/mi-cmd-var.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* nto-procfs.c: Update.
* ppc-linux-tdep.c: Update.
* procfs.c: Update.
* python/py-inferior.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* ravenscar-thread.c: Update.
* regcache.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* sol-thread.c: Update.
* solib.c: Update.
* target.c: Update.
* tui/tui-stack.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* windows-tdep.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* lynx-low.c: Update.
* mem-break.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* win32-low.c: Update.
|
|
This removes ptid_match in favor of the ptid_t::matches method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_match): Remove.
* common/ptid.h (ptid_match): Don't declare.
* fbsd-nat.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* linux-nat.c: Update.
* record-btrace.c: Update.
* regcache.c: Update.
* remote.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* server.c: Update.
|
|
This removes ptid_tid_p in favor of the ptid_t::tid_p method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_tid_p): Remove.
* common/ptid.h (ptid_tid_p): Don't declare.
* sol-thread.c: Update.
|
|
This removes ptid_lwp_p in favor of the ptid_t::lwp_p method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_lwp_p): Remove.
* common/ptid.h (ptid_lwp_p): Don't declare.
* fbsd-nat.c: Update.
* linux-nat.c: Update.
* nat/linux-procfs.c: Update.
* nat/x86-linux-dregs.c: Update.
* sol-thread.c: Update.
|
|
This removes ptid_is_pid in favor of the ptid_t::is_pid method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_is_pid): Remove.
* common/ptid.h (ptid_is_pid): Don't declare.
* infrun.c: Update.
* linux-nat.c: Update.
* mi/mi-interp.c: Update.
* remote.c: Update.
* thread.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
|
|
This removes ptid_get_tid in favor of calling the ptid_t::tid method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_get_tid): Remove.
* common/ptid.h (ptid_get_tid): Don't declare.
* ada-tasks.c: Update.
* aix-thread.c: Update.
* bsd-uthread.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* i386-darwin-nat.c: Update.
* infrun.c: Update.
* linux-tdep.c: Update.
* nto-procfs.c: Update.
* ppc-ravenscar-thread.c: Update.
* python/py-infthread.c: Update.
* ravenscar-thread.c: Update.
* sol-thread.c: Update.
* sparc-ravenscar-thread.c: Update.
* windows-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* target.c: Update.
|
|
This removes ptid_get_lwp in favor of calling the ptid_t::lwp method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_get_lwp): Remove.
* common/ptid.h (ptid_get_lwp): Don't declare.
* aarch64-linux-nat.c: Update.
* ada-tasks.c: Update.
* aix-thread.c: Update.
* amd64-linux-nat.c: Update.
* arm-linux-nat.c: Update.
* corelow.c: Update.
* fbsd-nat.c: Update.
* fbsd-tdep.c: Update.
* gnu-nat.c: Update.
* i386-cygwin-tdep.c: Update.
* i386-gnu-nat.c: Update.
* i386-linux-nat.c: Update.
* ia64-linux-nat.c: Update.
* inf-ptrace.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* mips-linux-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/aarch64-linux.c: Update.
* nat/linux-btrace.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nat/x86-linux-dregs.c: Update.
* obsd-nat.c: Update.
* ppc-fbsd-nat.c: Update.
* ppc-linux-nat.c: Update.
* procfs.c: Update.
* python/py-infthread.c: Update.
* ravenscar-thread.c: Update.
* remote.c: Update.
* s390-linux-nat.c: Update.
* sol-thread.c: Update.
* sol2-tdep.c: Update.
* spu-linux-nat.c: Update.
* x86-linux-nat.c: Update.
* xtensa-linux-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-mips-low.c: Update.
* lynx-low.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* thread-db.c: Update.
|
|
This removes ptid_get_pid in favor of calling the ptid_t::pid method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_get_pid): Remove.
* common/ptid.h (ptid_get_pid): Don't declare.
* aarch64-linux-nat.c: Update.
* ada-lang.c: Update.
* aix-thread.c: Update.
* alpha-bsd-nat.c: Update.
* amd64-fbsd-nat.c: Update.
* amd64-linux-nat.c: Update.
* arm-linux-nat.c: Update.
* arm-nbsd-nat.c: Update.
* auxv.c: Update.
* break-catch-syscall.c: Update.
* breakpoint.c: Update.
* bsd-uthread.c: Update.
* corelow.c: Update.
* ctf.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* fbsd-tdep.c: Update.
* gcore.c: Update.
* gnu-nat.c: Update.
* hppa-nbsd-nat.c: Update.
* hppa-obsd-nat.c: Update.
* i386-fbsd-nat.c: Update.
* ia64-linux-nat.c: Update.
* inf-ptrace.c: Update.
* infcmd.c: Update.
* inferior.c: Update.
* inferior.h: Update.
* inflow.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* m68k-bsd-nat.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* mips-linux-nat.c: Update.
* mips-nbsd-nat.c: Update.
* mips64-obsd-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/aarch64-linux.c: Update.
* nat/linux-btrace.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nat/x86-linux-dregs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* ppc-linux-nat.c: Update.
* ppc-nbsd-nat.c: Update.
* ppc-obsd-nat.c: Update.
* proc-service.c: Update.
* procfs.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* ravenscar-thread.c: Update.
* record.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* rs6000-nat.c: Update.
* s390-linux-nat.c: Update.
* sh-nbsd-nat.c: Update.
* sol-thread.c: Update.
* sparc-nat.c: Update.
* sparc64-tdep.c: Update.
* spu-linux-nat.c: Update.
* spu-tdep.c: Update.
* target-debug.h: Update.
* target.c: Update.
* thread.c: Update.
* tid-parse.c: Update.
* tracefile-tfile.c: Update.
* vax-bsd-nat.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* x86-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-mips-low.c: Update.
* lynx-low.c: Update.
* mem-break.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* tracepoint.c: Update.
|
|
This removes pid_to_ptid in favor of calling the ptid_t constructor
directly.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (pid_to_ptid): Remove.
* common/ptid.h (pid_to_ptid): Don't declare.
* aix-thread.c: Update.
* arm-linux-nat.c: Update.
* common/ptid.c: Update.
* common/ptid.h: Update.
* corelow.c: Update.
* ctf.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* fork-child.c: Update.
* gnu-nat.c: Update.
* go32-nat.c: Update.
* inf-ptrace.c: Update.
* infcmd.c: Update.
* inferior.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/fork-inferior.c: Update.
* nat/x86-linux-dregs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* procfs.c: Update.
* progspace.c: Update.
* remote.c: Update.
* rs6000-nat.c: Update.
* s390-linux-nat.c: Update.
* sol-thread.c: Update.
* spu-linux-nat.c: Update.
* target.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* windows-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-ppc-low.c: Update.
* linux-x86-low.c: Update.
* proc-service.c: Update.
* server.c: Update.
* spu-low.c: Update.
* thread-db.c: Update.
* win32-low.c: Update.
|
|
This removes ptid_build in favor of simply calling the ptid_t
constructor directly.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.h (ptid_build): Don't declare.
* common/ptid.c (ptid_build): Remove.
* aix-thread.c: Update.
* bsd-kvm.c: Update.
* bsd-uthread.c: Update.
* common/agent.c: Update.
* common/ptid.c: Update.
* common/ptid.h: Update.
* corelow.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* gnu-nat.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-thread-db.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* proc-service.c: Update.
* procfs.c: Update.
* ravenscar-thread.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* sol-thread.c: Update.
* target.c: Update.
* windows-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* lynx-low.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* spu-low.c: Update.
* thread-db.c: Update.
* win32-low.c: Update.
|
|
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
|
|
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
|
|
gdb/
* common/common-regcache.h (raw_compare): New function.
* regcache.c (regcache::raw_compare): Likewise.
* regcache.h (regcache::raw_compare): New declaration.
gdbserver/
* regcache.c (regcache::raw_compare): New function.
* regcache.h (regcache::raw_compare): New declaration.
|
|
A purely virtual class containing functions from gdb/regcache.h
Both the gdb regcache structures and gdbserver regcache inherit
directly from reg_buffer_common. This will allow for common
functions which require the use of a regcache.
gdb/
* common/common-regcache.h (reg_buffer_common): New structure.
* regcache.c (reg_buffer::invalidate): Move from detached_regcache.
(reg_buffer::raw_supply): Likewise.
(reg_buffer::raw_supply_integer): Likewise.
(reg_buffer::raw_supply_zeroed): Likewise.
(reg_buffer::raw_collect): Likewise.
(reg_buffer::raw_collect_integer): Likewise.
* regcache.h (reg_buffer::invalidate): Move from detached_regcache.
(reg_buffer::raw_supply): Likewise.
(reg_buffer::raw_supply_integer): Likewise.
(reg_buffer::raw_supply_zeroed): Likewise.
(reg_buffer::raw_collect): Likewise.
(reg_buffer::raw_collect_integer): Likewise.
gdbserver/
* regcache.c (new_register_cache): Use new.
(free_register_cache): Use delete.
(register_data): Use const.
(supply_register): Move body inside regcache.
(regcache::raw_supply): New override function.
(collect_register): Move body inside regcache.
(regcache::raw_collect): New override function.
(regcache::get_register_status): New override function.
* regcache.h (struct regcache): Inherit from reg_buffer_common.
|
|
The type of reg_buffer::m_register_status is an array of signed char,
probably to ensure that each element takes up only one byte. Instead,
since we use C++11, we can force the underlying type of register_status
to be signed char and use the enum type.
gdb/ChangeLog:
* common/common-regcache.h (enum register_status): Add
underlying type "signed char".
* regcache.h (reg_buffer) <m_register_status>: Change type to
register_status *.
* regcache.c (reg_buffer::reg_buffer): Alocate arrays of
register_status instead of signed char.
(reg_buffer::save): Use REG_UNKNOWN instead of 0.
(reg_buffer::get_register_status): Remove cast.
(readable_regcache::raw_read): Remove cast.
(readable_regcache::cooked_read): Remove cast.
|
|
This removes some cleanups from the btrace code by minorly C++-ifying
struct btrace_data.
gdb/ChangeLog
2018-06-08 Tom Tromey <tom@tromey.com>
* common/btrace-common.h (struct btrace_data): Add constructor,
destructor, move assignment operator.
<empty, clear, fini>: New methods.
<format>: Initialize.
(btrace_data_init, btrace_data_fini, btrace_data_clear)
(btrace_data_empty): Don't declare.
* common/btrace-common.c (btrace_data_init): Remove.
(btrace_data::fini): Rename from btrace_data_fini.
(btrace_data::empty): Rename from btrace_data_empty.
(btrace_data::clear): Rename from btrace_data_clear. Return
bool.
* btrace.h (make_cleanup_btrace_data): Don't declare.
* btrace.c (btrace_add_pc, btrace_stitch_trace, btrace_clear)
(parse_xml_btrace): Update.
(do_btrace_data_cleanup, make_cleanup_btrace_data): Remove.
(maint_btrace_clear_packet_history_cmd): Update.
gdb/gdbserver/ChangeLog
2018-06-08 Tom Tromey <tom@tromey.com>
* linux-low.c (linux_low_read_btrace): Update.
|
|
The DEF_ENUM_FLAGS_TYPE macro should be used with a trailing
semicolon, but the example in the comment lacks one.
gdb/ChangeLog:
2018-06-05 David Malcolm <dmalcolm@redhat.com>
* common/enum-flags.h: Add trailing semicolon to example in
comment.
|
|
Move gdb/common/diagnostics.h to include/diagnostics.h so that it can
be used in binutils.
gdb/
* ada-lex.l: Include "diagnostics.h" instead of
"common/diagnostics.h".
* unittests/environ-selftests.c: Likewise.
* common/diagnostics.h: Moved to ../include.
include/
* diagnostics.h: Moved from ../gdb/common/diagnostics.h.
|
|
This commit fixes a set of -Wmaybe-uninitialized warnings in GDB and
GDBserver, seen with GCC 7.3.1 on F27 at -O2. Specifically, all of
these:
src/gdb/breakpoint.c:5040:4: warning: ‘e’ may be used uninitialized in this function [-Wmaybe-uninitialized]
src/gdb/cli/cli-cmds.c:277:71: warning: ‘tracker’ may be used uninitialized in this function [-Wmaybe-uninitialized]
src/gdb/cli/cli-cmds.c:302:22: warning: ‘word’ may be used uninitialized in this function [-Wmaybe-uninitialized]
src/gdb/gdbserver/server.c:1895:7: warning: ‘result’ may be used uninitialized in this function [-Wmaybe-uninitialized]
src/gdb/gdbserver/server.c:1966:7: warning: ‘result’ may be used uninitialized in this function [-Wmaybe-uninitialized]
For example, looking at one of the gdbserver ones in more detail:
../../../src/gdb/gdbserver/server.c: In function ‘int handle_qxfer_btrace_conf(const char*, gdb_byte*, const gdb_byte*, ULONGEST, LONGEST)’:
../../../src/gdb/gdbserver/server.c:1966:7: warning: ‘result’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (result != 0)
^~
In this case (like the others), the 'result' variable is assigned in
both TRY and CATCH blocks:
TRY
{
result = target_read_btrace_conf (thread->btrace, &cache);
if (result != 0)
memcpy (own_buf, cache.buffer, cache.used_size);
}
CATCH (exception, RETURN_MASK_ERROR)
{
sprintf (own_buf, "E.%s", exception.message);
result = -1;
}
END_CATCH
if (result != 0)
return -3;
so it would seem like the warning is bogus.
However, END_CATCH is really a catch block in disguise, and that path
indeed does not initialize the variable:
#define END_CATCH \
catch (...) \
{ \
exception_rethrow (); \
} \
}
exception_rethrow does not return normally (it rethrows the current
exception after running cleanups), but the compiler can not see that.
If it could return normally, then indeed 'result' could be used
uninitialized if the TRY block threw some non-gdb exception, which
would be caught by END_CATCH.
The fix it to let the compiler know that the exception_rethrow does
not return normally, using ATTRIBUTE_NORETURN.
gdb/ChangeLog:
2018-05-30 Pedro Alves <palves@redhat.com>
* common/common-exceptions.h (exception_rethrow): Use
ATTRIBUTE_NORETURN.
|
|
The const_char_ptr is no longer used, so it can be removed.
ChangeLog
2018-05-29 Tom Tromey <tom@tromey.com>
* objc-lang.h: Don't include cp-support.h.
* common/gdb_vecs.h (const_char_ptr): Remove typedef. Don't
declare VEC.
|
|
I realized after pushing that I made a copy-pasto, I had:
# define HAVE_IS_TRIVIALLY_COPYABLE 1
instead of
# define HAVE_IS_TRIVIALLY_CONSTRUCTIBLE 1
with the consequence that IsMallocable was always std::true_type (and
was therefore not enforcing anything). Fixing that mistake triggered a
build failure:
/home/simark/src/binutils-gdb/gdb/objfiles.c:150:12: required from here
/home/simark/src/binutils-gdb/gdb/common/poison.h:228:3: error: static assertion failed: Trying to use XOBNEW with a non-POD data type.
I am not sure why I did not see this when I originally wrote the patch
(but I saw and fixed other failures). In any case, I swapped XOBNEW
with obstack_new to get rid of it.
Regtested on the buildbot.
gdb/ChangeLog:
* common/traits.h (HAVE_IS_TRIVIALLY_COPYABLE): Rename the wrong
instance to...
(HAVE_IS_TRIVIALLY_CONSTRUCTIBLE): ... this.
* objfiles.c (get_objfile_bfd_data): Allocate
objfile_per_bfd_storage with obstack_new when allocating on
obstack.
|
|
Since we use obstacks with objects that are not default constructible,
we sometimes need to manually call the constructor by hand using
placement new:
foo *f = obstack_alloc (obstack, sizeof (foo));
f = new (f) foo;
It's possible to use allocate_on_obstack instead, but there are types
that we sometimes want to allocate on an obstack, and sometimes on the
regular heap. This patch introduces a utility to make this pattern
simpler if allocate_on_obstack is not an option:
foo *f = obstack_new<foo> (obstack);
Right now there's only one usage (in tdesc_data_init).
To help catch places where we would forget to call new when allocating
such an object on an obstack, this patch also poisons some other methods
of allocating an instance of a type on an obstack:
- OBSTACK_ZALLOC/OBSTACK_CALLOC
- XOBNEW/XOBNEW
- GDBARCH_OBSTACK_ZALLOC/GDBARCH_OBSTACK_CALLOC
Unfortunately, there's no way to catch wrong usages of obstack_alloc.
By pulling on that string though, it tripped on allocating struct
template_symbol using OBSTACK_ZALLOC. The criterion currently used to
know whether it's safe to "malloc" an instance of a struct is whether it
is a POD. Because it inherits from struct symbol, template_symbol is
not a POD. This criterion is a bit too strict however, it should still
safe to allocate memory for a template_symbol and memset it to 0. We
didn't use is_trivially_constructible as the criterion in the first
place only because it is not available in gcc < 5. So here I considered
two alternatives:
1. Relax that criterion to use std::is_trivially_constructible and add a
bit more glue code to make it work with gcc < 5
2. Continue pulling on the string and change how the symbol structures
are allocated and initialized
I managed to do both, but I decided to go with #1 to keep this patch
simpler and more focused. When building with a compiler that does not
have is_trivially_constructible, the check will just not be enforced.
gdb/ChangeLog:
* common/traits.h (HAVE_IS_TRIVIALLY_COPYABLE): Define if
compiler supports std::is_trivially_constructible.
* common/poison.h: Include obstack.h.
(IsMallocable): Define to is_trivially_constructible if the
compiler supports it, define to true_type otherwise.
(xobnew): New.
(XOBNEW): Redefine.
(xobnewvec): New.
(XOBNEWVEC): Redefine.
* gdb_obstack.h (obstack_zalloc): New.
(OBSTACK_ZALLOC): Redefine.
(obstack_calloc): New.
(OBSTACK_CALLOC): Redefine.
(obstack_new): New.
* gdbarch.sh: Include gdb_obstack in gdbarch.h.
(gdbarch_obstack): New declaration in gdbarch.h, definition in
gdbarch.c.
(GDBARCH_OBSTACK_CALLOC, GDBARCH_OBSTACK_ZALLOC): Use
obstack_calloc/obstack_zalloc.
(gdbarch_obstack_zalloc): Remove.
* target-descriptions.c (tdesc_data_init): Use obstack_new.
|
|
I noticed that the printf command did not recognize the \e escape
sequence, used amongst other things to use colors:
(gdb) printf "This is \e[32mgreen\e[m!\n"
Unrecognized escape character \e in format string.
This patch makes format_pieces recognize it, which makes that command
print the expected result in glorious color.
I wrote a really simple unit test for format_pieces.
format_pieces::operator[] is unused so I removed it. I added
format_piece::operator==, which is needed to compare vectors of
format_piece.
gdb/ChangeLog:
PR cli/14975
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/format_pieces-selftests.c.
* common/format.h (format_piece) <operator==>: New.
(format_pieces) <operator[]>: Remove.
* common/format.c (format_pieces::format_pieces): Handle \e.
* unittests/format_pieces-selftests.c: New.
|
|
For GNU/Linux on x86-64, if the target is using the xsave format for
passing the floating-point information from the inferior then there
currently exists a bug relating to the x87 control registers, and the
mxcsr register.
The xsave format allows different floating-point features to be lazily
enabled, a bit in the xsave format tells GDB which floating-point
features have been enabled, and which have not.
Currently in GDB, when reading the floating point state, we check the
xsave bit flags, if the feature is enabled then we read the feature
from the xsave buffer, and if the feature is not enabled, then we
supply the default value from within GDB.
Within GDB, when writing the floating point state, we first fetch the
xsave state from the target and then, for any feature that is not yet
enabled, we write the default values into the xsave buffer. Next we
compare the regcache value with the value in the xsave buffer, and, if
the value has changed we update the value in the xsave buffer, and
mark the feature enabled in the xsave bit flags.
The problem then, is that the x87 control registers were not following
this pattern. We assumed that these registers were always written out
by the kernel, and we always wrote them out to the xsave buffer (but
didn't enabled the feature). The result of this is that if the kernel
had not yet enabled the x87 feature then within GDB we would see
random values for the x87 floating point control registers, and if the
user tried to modify one of these register, that modification would be
lost.
Finally, the mxcsr register was also broken in the same way as the x87
control registers. The added complexity with this case is that the
mxcsr register is part of both the avx and sse floating point feature
set. When reading or writing this register we need to check that at
least one of these features is enabled.
This bug was present in native GDB, and within gdbserver. Both are
fixed with this commit.
gdb/ChangeLog:
* common/x86-xstate.h (I387_FCTRL_INIT_VAL): New constant.
(I387_MXCSR_INIT_VAL): New constant.
* amd64-tdep.c (amd64_supply_xsave): Only read state from xsave
buffer if it was supplied by the inferior.
* i387-tdep.c (i387_supply_fsave): Use I387_MXCSR_INIT_VAL.
(i387_xsave_get_clear_bv): New function.
(i387_supply_xsave): Only read x87 control registers from the
xsave buffer if the feature is enabled, and the state will have
been written, otherwise, provide a suitable default.
(i387_collect_xsave): Pre-clear all registers in xsave buffer,
including x87 control registers. Update control registers if they
have changed from the default value, and mark features as enabled
as required.
* i387-tdep.h (i387_xsave_get_clear_bv): Declare.
gdb/gdbserver/ChangeLog:
* i387-fp.c (i387_cache_to_xsave): Only write x87 control
registers to the cache if their values have changed.
(i387_xsave_to_cache): Provide default values for x87 control
registers when these features are available, but disabled.
* regcache.c (supply_register_by_name_zeroed): New function.
* regcache.h (supply_register_by_name_zeroed): Declare new
function.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-init-x87-values.S: New file.
* gdb.arch/amd64-init-x87-values.exp: New file.
|
|
Some unaligned watchpoints were currently missed.
On old kernels as specified in
kernel RFE: aarch64: ptrace: BAS: Support any contiguous range (edit)
https://sourceware.org/bugzilla/show_bug.cgi?id=20207
after this patch some other unaligned watchpoints will get reported as false
positives.
With new kernels all the watchpoints should work exactly.
There may be a regresion that it now less merges watchpoints so that with
multiple overlapping watchpoints it may run out of the 4 hardware watchpoint
registers. But as discussed in the original thread GDB needs some generic
watchpoints merging framework to be used by all the target specific code.
Even current FSF GDB code does not merge it perfectly. Also with the more
precise watchpoints one can technically merge them less. And I do not think
it matters too much to improve mergeability only for old kernels.
Still even on new kernels some better merging logic would make sense.
There remains one issue:
kernel-4.15.14-300.fc27.armv7hl
FAIL: gdb.base/watchpoint-unaligned.exp: continue
FAIL: gdb.base/watchpoint-unaligned.exp: continue
(gdb) continue
Continuing.
Unexpected error setting watchpoint: Invalid argument.
(gdb) FAIL: gdb.base/watchpoint-unaligned.exp: continue
But that looks as a kernel bug to me.
(1) It is not a regression by this patch.
(2) It is unrelated to this patch.
gdb/ChangeLog
2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/19806 and support for PR external/20207.
* NEWS: Mention Aarch64 watchpoint improvements.
* aarch64-linux-nat.c (aarch64_linux_stopped_data_address): Fix missed
watchpoints and PR external/20207 watchpoints.
* nat/aarch64-linux-hw-point.c
(kernel_supports_any_contiguous_range): New.
(aarch64_watchpoint_offset): New.
(aarch64_watchpoint_length): Support PR external/20207 watchpoints.
(aarch64_point_encode_ctrl_reg): New parameter offset, new asserts.
(aarch64_point_is_aligned): Support PR external/20207 watchpoints.
(aarch64_align_watchpoint): New parameters aligned_offset_p and
next_addr_orig_p. Support PR external/20207 watchpoints.
(aarch64_downgrade_regs): New.
(aarch64_dr_state_insert_one_point): New parameters offset and
addr_orig.
(aarch64_dr_state_remove_one_point): Likewise.
(aarch64_handle_breakpoint): Update caller.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Support addr_orig and
aligned_offset.
(aarch64_linux_set_debug_regs): Remove const from state. Call
aarch64_downgrade_regs.
(aarch64_show_debug_reg_state): Print also dr_addr_orig_wp.
* nat/aarch64-linux-hw-point.h (DR_CONTROL_LENGTH): Rename to ...
(DR_CONTROL_MASK): ... this.
(struct aarch64_debug_reg_state): New field dr_addr_orig_wp.
(unsigned int aarch64_watchpoint_offset): New prototype.
(aarch64_linux_set_debug_regs): Remove const from state.
* utils.c (align_up, align_down): Move to ...
* common/common-utils.c (align_up, align_down): ... here.
* utils.h (align_up, align_down): Move to ...
* common/common-utils.h (align_up, align_down): ... here.
gdb/gdbserver/ChangeLog
2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* linux-aarch64-low.c (aarch64_stopped_data_address):
Likewise.
gdb/testsuite/ChangeLog
2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/19806 and support for PR external/20207.
* gdb.base/watchpoint-unaligned.c: New file.
* gdb.base/watchpoint-unaligned.exp: New file.
|
|
This removes both copies of do_closedir_cleanup in favor of a new
unique_ptr specialization.
Tested by the buildbot, though I'm not sure that these code paths are
exercised there.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* nto-procfs.c (do_closedir_cleanup): Remove.
(procfs_pidlist): Use gdb_dir_up.
* procfs.c (do_closedir_cleanup): Remove.
(proc_update_threads): Use gdb_dir_up.
* common/filestuff.h (struct gdb_dir_deleter): New.
(gdb_dir_up): New typedef.
|
|
I noticed a common pattern with gdb::ref_ptr, where callers would
"incref" and then create a new wrapper object, like:
Py_INCREF (obj);
gdbpy_ref<> ref (obj);
The ref_ptr constructor intentionally does not acquire a new
reference, but it seemed to me that it would be reasonable to add a
static member function that does so.
In this patch I chose to call the function "new_reference". I
considered "acquire_reference" as well, but "new" seemed less
ambiguous than "acquire" to me.
ChangeLog
2018-04-30 Tom Tromey <tom@tromey.com>
* common/gdb_ref_ptr.h (ref_ptr::new_reference): New static
method.
|
|
gdb/
* common/tdesc.h (tdesc_create_feature): Remove xml filename
parameter.
* features/aarch64-core.c (create_feature_aarch64_core):
Regenerate.
* features/aarch64-fpu.c (create_feature_aarch64_fpu):
Likewise.
* features/i386/32bit-avx.c (create_feature_i386_32bit_avx):
Likewise.
* features/i386/32bit-avx512.c
(create_feature_i386_32bit_avx512): Likewise.
* features/i386/32bit-core.c (create_feature_i386_32bit_core):
Likewise.
* features/i386/32bit-linux.c (create_feature_i386_32bit_linux):
Likewise.
* features/i386/32bit-mpx.c (create_feature_i386_32bit_mpx):
Likewise.
* features/i386/32bit-pkeys.c (create_feature_i386_32bit_pkeys):
Likewise.
* features/i386/32bit-sse.c (create_feature_i386_32bit_sse):
Likewise.
* features/i386/64bit-avx.c (create_feature_i386_64bit_avx):
Likewise.
* features/i386/64bit-avx512.c
(create_feature_i386_64bit_avx512): Likewise.
* features/i386/64bit-core.c (create_feature_i386_64bit_core):
Likewise.
* features/i386/64bit-linux.c (create_feature_i386_64bit_linux):
Likewise.
* features/i386/64bit-mpx.c (create_feature_i386_64bit_mpx):
Likewise.
* features/i386/64bit-pkeys.c (create_feature_i386_64bit_pkeys):
Likewise.
* features/i386/64bit-segments.c
(create_feature_i386_64bit_segments): Likewise.
* features/i386/64bit-sse.c (create_feature_i386_64bit_sse):
Likewise.
* features/i386/x32-core.c
(create_feature_i386_x32_core): Likewise.
* features/tic6x-c6xp.c (create_feature_tic6x_c6xp): Likewise.
* features/tic6x-core.c (create_feature_tic6x_core): Likewise.
* features/tic6x-gp.c (create_feature_tic6x_gp): Likewise.
* target-descriptions.c: In generated code, don't pass xml
filename.
gdbserver/
* tdesc.c: Remove xml parameter.
|
|
Add a print_xml_feature visitor class which turns a
target description into xml. Both gdb and gdbserver can do this.
gdb/
* common/tdesc.c (print_xml_feature::visit_pre): Add xml parsing.
(print_xml_feature::visit_post): Likewise.
(print_xml_feature::visit): Likewise.
* common/tdesc.h (tdesc_get_features_xml): Use const tdesc.
(print_xml_feature): Add new class.
* regformats/regdat.sh: Null xmltarget on feature targets.
* target-descriptions.c (struct target_desc): Add xmltarget.
(maintenance_check_tdesc_xml_convert): Add unittest function.
(tdesc_get_features_xml): Add function to get xml.
(maintenance_check_xml_descriptions): Test xml generation.
* xml-tdesc.c (string_read_description_xml): Add function.
* xml-tdesc.h (string_read_description_xml): Add declaration.
gdbserver/
* gdb/gdbserver/server.c (get_features_xml): Remove cast.
* tdesc.c (void target_desc::accept): Fill in function.
(tdesc_get_features_xml): Remove old xml creation.
(print_xml_feature::visit_pre): Add xml vistor.
* tdesc.h (struct target_desc): Make xmltarget mutable.
(tdesc_get_features_xml): Remove declaration.
|
|
gdb/
* common/tdesc.h (tdesc_architecture_name): Add new declaration.
(tdesc_osabi_name): Likewise.
* target-descriptions.c (tdesc_architecture_name): Add new function.
(tdesc_osabi_name): Likewise.
gdbserver/
* tdesc.c (tdesc_architecture_name): Add new function.
(tdesc_osabi_name): Likewise.
(tdesc_get_features_xml): Use new functions.
|
|
gdb/
* common/tdesc.c (tdesc_predefined_type): Move to here.
(tdesc_named_type): Likewise.
(tdesc_create_vector): Likewise.
(tdesc_create_struct): Likewise.
(tdesc_set_struct_size): Likewise.
(tdesc_create_union): Likewise.
(tdesc_create_flags): Likewise.
(tdesc_create_enum): Likewise.
(tdesc_add_field): Likewise.
(tdesc_add_typed_bitfield): Likewise.
(tdesc_add_bitfield): Likewise.
(tdesc_add_flag): Likewise.
(tdesc_add_enum_value): Likewise.
* common/tdesc.h (struct tdesc_type_builtin): Likewise.
(struct tdesc_type_vector): Likewise.
(struct tdesc_type_field): Likewise.
(struct tdesc_type_with_fields): Likewise.
(tdesc_create_enum): Add declaration.
(tdesc_add_typed_bitfield): Likewise.
(tdesc_add_enum_value): Likewise.
* target-descriptions.c (tdesc_type_field): Move from here.
(tdesc_type_builtin): Likewise.
(tdesc_type_vector): Likewise.
(tdesc_type_with_fields): Likewise.
(tdesc_predefined_types): Likewise.
(tdesc_named_type): Likewise.
(tdesc_create_vector): Likewise.
(tdesc_create_struct): Likewise.
(tdesc_set_struct_size): Likewise.
(tdesc_create_union): Likewise.
(tdesc_create_flags): Likewise.
(tdesc_create_enum): Likewise.
(tdesc_add_field): Likewise.
(tdesc_add_typed_bitfield): Likewise.
(tdesc_add_bitfield): Likewise.
(tdesc_add_flag): Likewise.
(tdesc_add_enum_value): Likewise.
* gdb/target-descriptions.h (tdesc_create_enum): Likewise.
(tdesc_add_typed_bitfield): Likewise.
(tdesc_add_enum_value): Likewise.
gdbserver/
* tdesc.c (tdesc_create_flags): Remove.
(tdesc_add_flag): Likewise.
(tdesc_named_type): Likewise.
(tdesc_create_union): Likewise.
(tdesc_create_struct): Likewise.
(tdesc_create_vector): Likewise.
(tdesc_add_bitfield): Likewise.
(tdesc_add_field): Likewise.
(tdesc_set_struct_size): Likewise.
|
|
gdb/
* common/tdesc.c (tdesc_feature::accept): Move to here.
(tdesc_feature::operator==): Likewise.
(tdesc_create_reg): Likewise.
* common/tdesc.h (tdesc_type_kind): Likewise.
(struct tdesc_type): Likewise.
(struct tdesc_feature): Likewise.
* regformats/regdat.sh: Create a feature.
* target-descriptions.c (tdesc_type_kind): Move from here.
(tdesc_type): Likewise.
(tdesc_type_up): Likewise.
(tdesc_feature): Likewise.
(tdesc_create_reg): Likewise.
gdbserver/
* tdesc.c (~target_desc): Remove implictly deleted items.
(init_target_desc): Iterate all features.
(tdesc_get_features_xml): Use vector.
(tdesc_create_feature): Create feature.
* tdesc.h (tdesc_feature) Remove
(target_desc): Add features.
|
|
gdb/
* Makefile.in: Add arch/tdesc.c
* common/tdesc.c: New file.
* common/tdesc.h (tdesc_element_visitor): Move to here.
(tdesc_element): Likewise.
(tdesc_reg): Likewise.
(tdesc_reg_up): Likewise.
* regformats/regdef.h (reg): Add offset to constructors.
* target-descriptions.c (tdesc_element_visitor): Move from here.
(tdesc_element): Likewise.
(tdesc_reg): Likewise.
(tdesc_reg_up): Likewise.
gdbserver/
* Makefile.in: Add common/tdesc.c
* tdesc.c (init_target_desc): init all reg_defs from register vector.
(tdesc_create_reg): Create tdesc_reg.
* tdesc.h (tdesc_feature): Add register vector.
|
|
Add some selftests for these two functions. To to make it easier to
compare sequences of ranges, add operator== and operator!= to compare
two gdb::array_view, and add operator== in struct range.
gdb/ChangeLog:
* value.c: Include "selftest.h" and "common/array-view.h".
(struct range) <operator ==>: New.
(test_ranges_contain): New.
(check_ranges_vector): New.
(test_insert_into_bit_range_vector): New.
(_initialize_values): Register selftests.
* common/array-view.h (operator==, operator!=): New.
|
|
This patch replaces VEC(inline_state) with std::vector<inline_state> and
adjusts the code that uses it.
gdb/ChangeLog:
* common/gdb_vecs.h (unordered_remove): Add overload that takes
an iterator.
* inline-frame.c: Include <algorithm>.
(struct inline_state): Add constructor.
(inline_state_s): Remove.
(DEF_VEC_O(inline_state_s)): Remove.
(inline_states): Change type to std::vector.
(find_inline_frame_state): Adjust to std::vector.
(allocate_inline_frame_state): Remove.
(clear_inline_frame_state): Adjust to std::vector.
(skip_inline_frames): Adjust to std::vector.
|
|
We had a few times the need for a data structure that does essentially
what C++17's std::string_view does, which is to give an std::string-like
interface (only the read-only operations) to an arbitrary character
buffer.
This patch adapts the files copied from libstdc++ by the previous patch
to integrate them with GDB. Here's a summary of the changes:
* Remove things related to wstring_view, u16string_view and
u32string_view (I don't think we need them, but we can always add them
later).
* Remove usages of _GLIBCXX_BEGIN_NAMESPACE_VERSION and
_GLIBCXX_END_NAMESPACE_VERSION.
* Put the code in the gdb namespace. I had to add a few "std::" in
front of std type usages.
* Change __throw_out_of_range_fmt() for error().
* Make gdb::string_view an alias of std::string_view when building
with >= c++17.
* Remove a bunch of constexpr, because they are not valid in c++11
(e.g. they are not a single return line).
* Use std::common_type<_Tp>::type instead of std::common_type_t<_Tp>,
because c++11 doesn't have the later.
* Remove the #pragma GCC system_header, since that silences some
warnings that we might want to have if we're doing something not
correctly.
* Remove operator ""sv. It would need a lot of work to make all
supported compilers happy, and we can easily live without it.
* Remove operator<<. It is implemented using __ostream_insert (a
libstdc++ internal). Bringing it in might be possible, but I don't
think that would be worth the effort, since we don't really use
streams at the moment.
* Replace internal libstdc++ asserts ( __glibcxx_assert and
__glibcxx_requires_string_len) with gdb_assert.
* Remove hash helpers, because they use libstdc++ internal functions.
If we need them we always import them later.
The string_view class in cli/cli-script.c is removed and its usage
replaced with the new gdb::string_view.
gdb/ChangeLog:
* common/gdb_string_view.h: Remove libstdc++ implementation
details, adjust to gdb reality.
* common/gdb_string_view.tcc: Likewise.
* cli/cli-script.c (struct string_view): Remove.
(user_args) <m_args>: Change element type to gdb::string_view.
(user_args::insert_args): Adjust.
|
|
This patch copies the following files from libstdc++ (commit
02a4441f002c):
${gcc}/libstdc++-v3/include/experimental/string_view
-> ${binutils-gdb}/gdb/common/gdb_string_view.h
${gcc}/libstdc++-v3/include/experimental/bits/string_view.tcc
-> ${binutils-gdb}/gdb/common/gdb_string_view.tcc
The local modifications are done in the following patch in order to make
it easier to review them.
gdb/ChangeLog:
* common/gdb_string_view.h: New file.
* common/gdb_string_view.tcc: New file.
|
|
This patch started by changing target_read_alloc_1 to return a
byte_vector, to avoid manual memory management (in target_read_alloc_1
and in the callers). To communicate failures to the callers, it
actually returns a gdb::optional<gdb::byte_vector>.
Adjusting target_read_stralloc was a bit more tricky, since it wants to
return a buffer of char, and not gdb_byte. Since you can't just cast a
gdb::byte_vector into a gdb::def_vector<char>, I made
target_read_alloc_1 templated, so both versions (that return vectors of
gdb_byte and char) are generated. Since target_read_stralloc now
returns a gdb::char_vector instead of a gdb::unique_xmalloc_ptr<char>, a
few callers need to be adjusted.
gdb/ChangeLog:
* common/byte-vector.h (char_vector): New type.
* target.h (target_read_alloc): Return
gdb::optional<byte_vector>.
(target_read_stralloc): Return gdb::optional<char_vector>.
(target_get_osdata): Return gdb::optional<char_vector>.
* target.c (target_read_alloc_1): Templatize. Replacement
manual memory management with vector.
(target_read_alloc): Change return type, adjust.
(target_read_stralloc): Change return type, adjust.
(target_get_osdata): Change return type, adjust.
* auxv.c (struct auxv_info) <length>: Remove.
<data>: Change type to gdb::optional<byte_vector>.
(auxv_inferior_data_cleanup): Free auxv_info with delete.
(get_auxv_inferior_data): Allocate auxv_info with new, adjust.
(target_auxv_search): Adjust.
(fprint_target_auxv): Adjust.
* avr-tdep.c (avr_io_reg_read_command): Adjust.
* linux-tdep.c (linux_spu_make_corefile_notes): Adjust.
(linux_make_corefile_notes): Adjust.
* osdata.c (get_osdata): Adjust.
* remote.c (remote_get_threads_with_qxfer): Adjust.
(remote_memory_map): Adjust.
(remote_traceframe_info): Adjust.
(btrace_read_config): Adjust.
(remote_read_btrace): Adjust.
(remote_pid_to_exec_file): Adjust.
* solib-aix.c (solib_aix_get_library_list): Adjust.
* solib-dsbt.c (decode_loadmap): Don't free buf.
(dsbt_get_initial_loadmaps): Adjust.
* solib-svr4.c (svr4_current_sos_via_xfer_libraries): Adjust.
* solib-target.c (solib_target_current_sos): Adjust.
* tracepoint.c (sdata_make_value): Adjust.
* xml-support.c (xinclude_start_include): Adjust.
(xml_fetch_content_from_file): Adjust.
* xml-support.h (xml_fetch_another): Change return type.
(xml_fetch_content_from_file): Change return type.
* xml-syscall.c (xml_init_syscalls_info): Adjust.
* xml-tdesc.c (file_read_description_xml): Adjust.
(fetch_available_features_from_target): Change return type.
(target_fetch_description_xml): Adjust.
(target_read_description_xml): Adjust.
|
|
Now that all instances of VEC(char_ptr) are gone, we can remove the
typedef. There is just one usage left, that is trivial to replace.
Tested by rebuilding on an enable-targets=all build.
gdb/ChangeLog:
* common/gdb_vecs.h (char_ptr): Remove.
* tracepoint.c (encode_actions_1): Remove usage of char_ptr.
|
|
This is a straightforward replacement, no change in behavior are
intended/expected.
This is the last usage of VEC(char_ptr), so it can now be removed.
gdb/ChangeLog:
* guile/scm-utils.c (gdbscm_parse_function_args): Replace VEC
with std::vector.
* common/gdb_vecs.h (DEF_VEC_P (char_ptr)): Remove.
|
|
This patch replaces VEC(static_tracepoint_marker_p) with std::vector,
and does some c++ification around that. I thought a new overload of
hex2str was useful, so I added it as well as corresponding unit tests.
I also added an overload of ui_out::field_string that takes an
std::string directly.
gdb/ChangeLog:
* tracepoint.h (struct static_tracepoint_marker): Initialize
fields, define default constructor, move constructor and move
assignment, disable the rest.
<str_id, extra>: Make std::string.
(release_static_tracepoint_marker): Remove.
(free_current_marker): Remove.
* tracepoint.c (free_current_marker): Remove.
(parse_static_tracepoint_marker_definition): Adjust to
std::string, use new hex2str overload.
(release_static_tracepoint_marker): Remove.
(print_one_static_tracepoint_marker): Get marker by reference
and adjust to std::string.
(info_static_tracepoint_markers_command): Adjust to std::vector
changes
* target.h (static_tracepoint_marker_p): Remove typedef.
(DEF_VEC_P(static_tracepoint_marker_p)): Remove.
(struct target_ops) <to_static_tracepoint_marker_at>: Return
bool.
<to_static_tracepoint_markers_by_strid>: Return std::vector.
* target-debug.h
(target_debug_print_VEC_static_tracepoint_marker_p_p): Remove.
(target_debug_print_std_vector_static_tracepoint_marker): New.
(target_debug_print_struct_static_tracepoint_marker_p): Rename
to...
(target_debug_print_static_tracepoint_marker_p): ... this.
* target-delegates.c: Re-generate.
* breakpoint.h (struct tracepoint) <static_trace_marker_id>:
Make std::string.
* breakpoint.c (init_breakpoint_sal): Adjust to std::string.
(decode_static_tracepoint_spec): Adjust to std::vector.
(tracepoint_print_one_detail): Adjust to std::string.
(strace_marker_decode_location): Adjust to std::string.
(update_static_tracepoint): Adjust to std::string, remove call
to release_static_tracepoint_marker.
* linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
Adjust to std::vector.
* remote.c (remote_static_tracepoint_marker_at): Return bool.
(remote_static_tracepoint_markers_by_strid): Adjust to
std::vector.
* common/rsp-low.h (hex2str): New overload with explicit count
of bytes.
* common/rsp-low.c (hex2str): New overload with explicit count
of bytes.
* unittests/rsp-low-selftests.c (test_hex2str): New function.
(_initialize_rsp_low_selftests): Add test_hex2str test.
* unittests/tracepoint-selftests.c
(test_parse_static_tracepoint_marker_definition): Adjust to
std::string.
|
|
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
|
|
[This patch should go on top of "linux_qxfer_libraries_svr4: Use
std::string", I should have sent them together as a series.]
I noticed that linux_qxfer_libraries_svr4 used xml_escape_text, which
returns an std::string. That string is then copied into a larger
buffer. It would be more efficient if we had a version of
xml_escape_text which appended to an existing string instead of
returning a new one. This is what this patch does.
I manually verified that the output of linux_qxfer_libraries_svr4 didn't
change before/after the patch.
gdb/ChangeLog:
* common/xml-utils.c (xml_escape_text): Move code to...
(xml_escape_text_append): ... this new function.
* common/xml-utils.h (xml_escape_text_append): New declaration.
* unittests/xml-utils-selftests.c (test_xml_escape_text_append):
New function.
(_initialize_xml_utils): register test_xml_escape_text_append as
a selftest.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_qxfer_libraries_svr4): Use
xml_escape_text_append.
|
|
This patch replaces two VEC(tp_t) with std::vector<thread_info *>, which
allows to remove two cleanups. To make it easier to map the old code to
the new code, I added the ordered_remove and unordered_remove functions,
which operate on std::vector and do the same as VEC's
ordered_remove/unordered_remove.
gdb/ChangeLog:
* record-btrace.c (record_btrace_maybe_mark_async_event): Change
parameter types to std::vector. Use bool.
(record_btrace_wait): Replace VEC(tp_t) with
std::vector<thread_info *>.
* common/gdb_vecs.h (unordered_remove, ordered_remove): New.
|
|
Nothing is using it anymore.
gdb/ChangeLog:
* common/gdb_vecs.c (free_char_ptr_vec): Remove.
* common/gdb_vecs.h (free_char_ptr_vec): Remove.
|
|
This patch makes delim_string_to_char_ptr_vec and all related functions
use std::vector of gdb::unique_xmalloc_ptr. This allows getting rid of
make_cleanup_free_char_ptr_vec. Returning a vector of
unique_xmalloc_ptr instead of std::string allows to minimize the impacts
on the calling code. We can evaluate later whether we could/should
return a vector of std::strings instead.
gdb/ChangeLog:
* common/gdb_vecs.h (make_cleanup_free_char_ptr_vec): Remove.
(delim_string_to_char_ptr_vec): Return std::vector of
gdb::unique_xmalloc_ptr.
(dirnames_to_char_ptr_vec_append): Take std::vector of
gdb::unique_xmalloc_ptr.
(dirnames_to_char_ptr_vec): Return std::vector of
gdb::unique_xmalloc_ptr.
* common/gdb_vecs.c (delim_string_to_char_ptr_vec_append):
Take std::vector of gdb::unique_xmalloc_ptr, adjust the code.
(delim_string_to_char_ptr_vec): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(dirnames_to_char_ptr_vec_append): Take an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(dirnames_to_char_ptr_vec): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
* auto-load.c (auto_load_safe_path_vec): Change type to
std::vector of gdb::unique_xmalloc_ptr.
(auto_load_expand_dir_vars): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(auto_load_safe_path_vec_update): Adjust.
(filename_is_in_auto_load_safe_path_vec): Adjust.
(auto_load_objfile_script_1): Adjust.
* build-id.c (build_id_to_debug_bfd): Adjust.
* linux-thread-db.c (thread_db_load_search): Adjust.
* source.c (add_path): Adjust.
(openp): Adjust.
* symfile.c (find_separate_debug_file): Adjust.
* utils.c (do_free_char_ptr_vec): Remove.
(make_cleanup_free_char_ptr_vec): Remove.
gdb/gdbserver/ChangeLog:
* server.c (parse_debug_format_options): Adjust to
delim_string_to_char_ptr_vec changes.
* thread-db.c (thread_db_load_search): Adjust to
dirnames_to_char_ptr_vec changes.
|
|
on mingw*)
commit b4987c956dfa44ca9fd8552f63e15f5fa094b2a4
Author: Sergio Durigan Junior <sergiodj@redhat.com>
Date: Fri Feb 9 18:44:59 2018 -0500
Create new common/pathstuff.[ch]
Introduced a regression when compiling for mingw*:
/gdb/common/pathstuff.c: In function 'gdb::unique_xmalloc_ptr<char>
gdb_realpath(const char*)':
/gdb/common/pathstuff.c:56:14: error: 'MAX_PATH' was not declared in this scope
char buf[MAX_PATH];
^
/gdb/common/pathstuff.c:57:5: error: 'DWORD' was not declared in this scope
DWORD len = GetFullPathName (filename, MAX_PATH, buf, NULL);
^
/gdb/common/pathstuff.c:57:11: error: expected ';' before 'len'
DWORD len = GetFullPathName (filename, MAX_PATH, buf, NULL);
^
/gdb/common/pathstuff.c:63:9: error: 'len' was not declared in this scope
if (len > 0 && len < MAX_PATH)
^
/gdb/common/pathstuff.c:64:54: error: 'buf' was not declared in this scope
return gdb::unique_xmalloc_ptr<char> (xstrdup (buf));
^
make[2]: *** [pathstuff.o] Error 1
The proper fix is to conditionally include "<windows.h>". This commit
does that, without introducing any regressions as per tests made by
our BuildBot.
gdb/ChangeLog:
2018-03-01 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/22907
* common/pathstuff.c: Conditionally include "<windows.h>".
|
|
Simon mentioned on IRC that, after the startup-with-shell feature has
been implemented on gdbserver, it is not possible to specify a
filename-only binary, like:
$ gdbserver :1234 a.out
/bin/bash: line 0: exec: a.out: not found
During startup program exited with code 127.
Exiting
This happens on systems where the current directory "." is not listed
in the PATH environment variable. Although including "." in the PATH
variable is a possible workaround, this can be considered a regression
because before startup-with-shell it was possible to use only the
filename (due to reason that gdbserver used "exec*" directly).
The idea of the patch is to verify if the program path provided by the
user (or by the remote protocol) contains a directory separator
character. If it doesn't, it means we're dealing with a filename-only
binary, so we call "gdb_abspath" to properly expand it and transform
it into a full path. Otherwise, we leave the program path untouched.
This mimicks the behaviour seen on GDB (look at "openp" and
"attach_inferior", for example).
I am also submitting a testcase which exercises the scenario described
above. This test requires gdbserver to be executed in a different CWD
than the original, so I also created a helper function, "with_cwd" (on
testsuite/lib/gdb.exp), which takes care of cd'ing into and out of the
specified dir.
Built and regtested on BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simon.marchi@polymtl.ca>
* common/common-utils.c: Include "sys/stat.h".
(is_regular_file): Move here from "source.c"; change return
type to "bool".
* common/common-utils.h (is_regular_file): New prototype.
* common/pathstuff.c (contains_dir_separator): New function.
* common/pathstuff.h (contains_dir_separator): New prototype.
* source.c: Don't include "sys/stat.h".
(is_regular_file): Move to "common/common-utils.c".
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c: Include "filenames.h" and "pathstuff.h".
(program_name): Delete variable.
(program_path): New anonymous class.
(get_exec_wrapper): Use "program_path" instead of
"program_name".
(handle_v_run): Likewise.
(captured_main): Likewise.
(process_serial_event): Likewise.
gdb/testsuite/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.server/abspath.exp: New file.
* lib/gdb.exp (with_cwd): New procedure.
|
