| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that all its usages are removed, we can get rid of DEF_VEC_I (int).
gdb/ChangeLog:
* common/gdb_vecs.h (DEF_VEC_I (int)): Remove.
|
|
Simple replacement of VEC with std::vector.
gdb/ChangeLog:
* common/filestuff.c: Include <algorithm>.
(open_fds): Change type to std::vector<int>.
(do_mark_open_fd): Adjust.
(unmark_fd_no_cloexec): Adjust.
(do_close): Adjust.
|
|
common/common.m4 still had checks for termio.h/sgtty.h that are stale
now. Remove them.
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* common/common.m4 (GDB_AC_COMMON): No longer check termio.h nor
sgtty.h.
* config.in, configure: Regenerate.
gdb/gdbserver/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* config.in, configure: Regenerate.
|
|
This commit garbage collects the termio and sgtty support.
GDB's terminal handling code still has support for the old termio and
sgtty interfaces in addition to termios. However, I think it's pretty
safe to assume that for a long, long time, Unix-like systems provide
termios. GNU/Linux, Solaris, Cygwin, AIX, DJGPP, macOS and the BSDs
all have had termios.h for many years. Looking around the web, I
found discussions about FreeBSD folks trying to get rid of old sgtty.h
a decade ago:
https://lists.freebsd.org/pipermail/freebsd-hackers/2007-March/019983.html
So I think support for termio and sgtty in GDB is just dead code that
is never compiled anywhere and is just getting in the way. For
example, serial_noflush_set_tty_state and the raw<->cooked concerns
mentioned in inflow.c only exist because of sgtty (see
hardwire_noflush_set_tty_state).
Regtested on GNU/Linux.
Confirmed that I can still build Solaris, DJGPP and AIX GDB and that
the resulting GDBs still include the termios.h-guarded code.
Confirmed mingw-w64 GDB still builds and skips the termios.h-guarded
code.
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* Makefile.in (SER_HARDWIRE): Update comment.
(HFILES_NO_SRCDIR): Remove gdb_termios.h.
* common/gdb_termios.h: Delete file.
* common/job-control.c: Include termios.h and unistd.h instead of
gdb_termios.h.
(gdb_setpgid): Remove HAVE_TERMIOS || TIOCGPGRP preprocessor
check.
(have_job_control): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
Remove sgtty code.
* configure.ac: No longer check for termio.h and sgtty.h.
* configure: Regenerate.
* inflow.c: Include termios.h instead of gdb_termios.h. Replace
PROCESS_GROUP_TYPE checks with HAVE_TERMIOS_H checks throughout.
Replace PROCESS_GROUP_TYPE references with pid_t references
throughout.
(gdb_getpgrp): Delete.
(set_initial_gdb_ttystate): Use tcgetpgrp instead of gdb_getpgrp.
(child_terminal_inferior): Remove comment. Remove sgtty code.
(child_terminal_ours_1): Use tcgetpgrp directly instead of
gdb_getpgrp. Use serial_set_tty_state instead aof
serial_noflush_set_tty_state. Remove sgtty code.
* inflow.h: Include unistd.h instead of gdb_termios.h. Replace
PROCESS_GROUP_TYPE check with HAVE_TERMIOS_H check.
(inferior_process_group): Now returns pid_t.
* ser-base.c (ser_base_noflush_set_tty_state): Delete.
* ser-base.h (ser_base_noflush_set_tty_state): Delete.
* ser-event.c (serial_event_ops): Update.
* ser-go32.c (dos_noflush_set_tty_state): Delete.
(dos_ops): Update.
* ser-mingw.c (hardwire_ops, tty_ops, pipe_ops, tcp_ops): Update.
* ser-pipe.c (pipe_ops): Update.
* ser-tcp.c (tcp_ops): Update.
* ser-unix.c: Include termios.h instead of gdb_termios.h. Remove
HAVE_TERMIOS checks.
[HAVE_TERMIO] (struct hardwire_ttystate): Delete.
[HAVE_SGTTY] (struct hardwire_ttystate): Delete.
(get_tty_state, set_tty_state): Drop termio and sgtty code, and
assume termios.
(hardwire_noflush_set_tty_state): Delete.
(hardwire_print_tty_state, hardwire_drain_output)
(hardwire_flush_output, hardwire_flush_input)
(hardwire_send_break, hardwire_raw, hardwire_setbaudrate)
(hardwire_setstopbits, hardwire_setparity): Drop termio and sgtty
code, and assume termios.
(hardwire_ops): Update.
(_initialize_ser_hardwire): Remove HAVE_TERMIOS check.
* serial.c (serial_noflush_set_tty_state): Delete.
* serial.h (serial_noflush_set_tty_state): Delete.
(serial_ops::noflush_set_tty_state): Delete.
gdb/gdbserver/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* configure.ac: No longer check for termio.h and sgtty.h.
* configure: Regenerate.
* remote-utils.c: Include termios.h instead of gdb_termios.h.
(remote_open): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
Remove termio and sgtty code.
|
|
When compiling with clang or gcc 8, we see warnings like this:
/home/emaisin/src/binutils-gdb/gdb/arm-tdep.c:10013:13: error: comparison of 0 <= unsigned expression is always true [-Werror,-Wtautological-compare]
if (0 <= insn_op1 && 3 >= insn_op1)
~ ^ ~~~~~~~~
/home/emaisin/src/binutils-gdb/gdb/arm-tdep.c:11722:20: error: comparison of unsigned expression >= 0 is always true [-Werror,-Wtautological-compare]
else if (opB >= 0 && opB <= 2)
~~~ ^ ~
This is because an unsigned integer (opB in this case) will always be >=
0. It is still useful to keep both bounds of the range in the
expression, even if one is at the edge of the data type range. This
patch introduces a utility function in_inclusive_range that gets rid of
the warning while conveying that we are checking for a range.
Tested by rebuilding.
gdb/ChangeLog:
* common/common-utils.h (in_inclusive_range): New function.
* arm-tdep.c (arm_record_extension_space): Use
in_inclusive_range.
(thumb_record_ld_st_reg_offset): Use in_inclusive_range.
* cris-tdep.c (cris_spec_reg_applicable): Use
in_inclusive_range.
|
|
string_appendf is like string_printf, but instead of allocating a new
string, it appends to an existing string. This allows reusing a
std::string's memory buffer across several calls, for example.
gdb/ChangeLog:
2017-10-30 Pedro Alves <palves@redhat.com>
* common/common-utils.c (string_appendf, string_vappendf): New
functions.
* common/common-utils.h (string_appendf, string_vappendf): New
declarations.
* unittests/common-utils-selftests.c (string_appendf_func)
(test_appendf_func, string_vappendf_wrapper, string_appendf_tests)
(string_vappendf_tests): New functions.
(_initialize_common_utils_selftests): Register "string_appendf" and
"string_vappendf tests".
|
|
This patch adds support for handling format strings to both
floatformat_to_string and decimal_to_string, and then uses
those routines to implement ui_printf formatted printing.
There is already a subroutine printf_decfloat that ui_printf uses to
handle decimal FP. This is renamed to printf_floating and updated
to handle both binary and decimal FP. This includes the following
set of changes:
- printf_decfloat currently parses the format string again to determine
the intended target format. This seems superfluous since the common
parsing code in parse_format_string already did this, but then did
not pass the result on to its users. Fixed by splitting the decfloat_arg
argument class into three distinct classes, and passing them through.
- Now we can rename printf_decfloat to printf_floating and also call it
for the argument classes representing binary FP types.
- The code will now use the argclass to detect the type the value should
be printed at, and converts the input value to this type if necessary.
To remain compatible with current behavior, for binary FP the code
instead tries to re-interpret the input value as a FP type of the
same size if that exists. (Maybe this behavior is more confusing
than useful -- but this can be changed later if we want to ...)
- Finally, we can use floatformat_to_string / decimal_to_string passing
the format string to perform the formatted output using the desired
target FP type.
Note that we no longer generate different code depending on whether or not
the host supports "long double" -- this check is obsolete anyway since C++11
mandates "long double", and in any case a %lg format string is intended to
refer to the *target* long double type, not the host version.
Note also that formatted printing of DFP numbers may not work correctly,
since it attempts to use the host printf to do so (and makes unwarranted
assumptions about the host ABI while doing so!). This is no change to
the current behavior -- I simply moved the code from printf_decfloat to
the decimal_to_string routine in dfp.c. If we want to fix it in the
future, that is a more appropriate place anyway.
ChangeLog:
2017-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* common/format.h (enum argclass): Replace decfloat_arg by
dec32float_arg, dec64float_arg, and dec128float_arg.
* common/format.c (parse_format_string): Update to return
new decimal float argument classes.
* printcmd.c (printf_decfloat): Rename to ...
(printf_floating): ... this. Add argclass argument, and use it
instead of parsing the format string again. Add support for
binary floating-point values, using floatformat_to_string.
Convert value to the target format if it doesn't already match.
(ui_printf): Call printf_floating instead of printf_decfloat,
also for double_arg / long_double_arg. Pass argclass.
* dfp.c (decimal_to_string): Add format string argument.
* dfp.h (decimal_to_string): Likewise.
* doublest.c (floatformat_to_string): Add format string argument.
* doublest.h (floatformat_to_string): Likewise.
|
|
This patch gets rid of catch_exceptions / catch_exceptions_with_msg.
The latter is done mostly by getting rid of the three remaining
vestigial libgdb wrapper functions, which are really pointless
nowadays. This results in a good number of simplifications.
(I checked that Insight doesn't use those functions.)
The gdb.mi/mi-pthreads.exp change is necessary because this actually
fixes a bug, IMO -- the patch stops MI's -thread-select causing output
on the CLI stream.
I.e., before:
-thread-select 123456789
&"Thread ID 123456789 not known.\n"
^error,msg="Thread ID 123456789 not known."
(gdb)
After:
-thread-select 123456789
^error,msg="Thread ID 123456789 not known."
(gdb)
gdb/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* breakpoint.c (struct captured_breakpoint_query_args)
(do_captured_breakpoint_query, gdb_breakpoint_query): Delete.
(print_breakpoint): New.
* breakpoint.h (print_breakpoint): Declare.
* common/common-exceptions.h (enum return_reason): Remove
references to catch_exceptions.
* exceptions.c (catch_exceptions, catch_exceptions_with_msg):
Delete.
* exceptions.h (catch_exceptions_ftype, catch_exceptions)
(catch_exception_ftype, catch_exceptions_with_msg): Delete.
* gdb.h: Delete.
* gdbthread.h (thread_select): Declare.
* mi/mi-cmd-break.c: Don't include gdb.h.
(breakpoint_notify): Use print_breakpoint.
* mi/mi-cmd-catch.c: Don't include gdb.h.
* mi/mi-interp.c: Don't include gdb.h.
(mi_print_breakpoint_for_event): New.
(mi_breakpoint_created, mi_breakpoint_modified): Use
mi_print_breakpoint_for_event.
* mi/mi-main.c: Don't include gdb.h.
(mi_cmd_thread_select): Parse the global thread ID here. Use
thread_select instead of gdb_thread_select.
(mi_cmd_thread_list_ids): Output "thread-ids" tuple here instead
of using gdb_list_thread_ids.
* remote-fileio.c (do_remote_fileio_request): Change type. Reply
FILEIO_ENOSYS here.
(remote_fileio_request): Use TRY/CATCH instead of
catch_exceptions.
* symfile-mem.c (struct symbol_file_add_from_memory_args)
(symbol_file_add_from_memory_wrapper): Delete.
(add_vsyscall_page): Use TRY/CATCH instead of catch_exceptions.
* thread.c: Don't include gdb.h.
(do_captured_list_thread_ids, gdb_list_thread_ids): Delete.
(thread_alive): Use thread_select.
(do_captured_thread_select): Delete, parts salvaged as ...
(thread_select): ... this new function.
(gdb_thread_select): Delete.
gdb/testsuite/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Don't
expect CLI output.
|
|
If you want to use catch_errors with a function with parameters, then
currently you have to manually write a "capture" struct wrapping the
arguments and marshall/unmarshall that.
https://sourceware.org/ml/gdb-patches/2017-09/msg00834.html proposed
adjusting catch_errors to use gdb::function_view, which would allow
passing lambdas with automatic captures. However, it seems like using
TRY/CATCH directly instead ends up producing clearer and easier to
debug code. This is what this commit does.
Note that removing catch_errors exposes further cleanup opportunities
around no longer having to follow catch_errors callback type, and also
removes a few cleanups.
I didn't do anything to save/restore current_uiout because I think
that should be the responsibility of the code that changes
current_uiout in the first place.
(Another approach could be to make catch_errors a variadic template
like:
template<typename Function, typename... Args>
int catch_errors (const char *errstring, return_mask mask,
Function &&func, Args... args);
and then with:
extern void function_with_args (int, int);
extern void function_with_no_args ();
calls to the above functions would be wrapped like this:
catch_errors ("some error happened", RETURN_MASK_ERROR,
function_with_args, arg1, arg2);
catch_errors ("some error happened", RETURN_MASK_ERROR,
function_with_no_args);
but I'm thinking that that doesn't improve much if at all either.)
gdb/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* breakpoint.c (breakpoint_cond_eval): Change return type to bool
and reverse logic.
(WP_DELETED, WP_VALUE_CHANGED, WP_VALUE_NOT_CHANGED, WP_IGNORE):
No longer macros. Instead ...
(enum wp_check_result): They're now values of this new
enumeration.
(watchpoint_check): Change return type to wp_check_result and
parameter type to bpstat.
(bpstat_check_watchpoint): Use TRY/CATCH instead of catch_errors.
(bpstat_check_breakpoint_conditions): Use TRY/CATCH instead of
catch_errors. Reverse logic of watchpoint_check call.
(breakpoint_re_set_one): Now returns void and takes a breakpoint
pointer as parameter.
(breakpoint_re_set): Use TRY/CATCH instead of catch_errors.
* common/common-exceptions.c (throw_exception_sjlj): Update
comments to avoid mentioning catch_errors.
* exceptions.c (catch_errors): Delete.
* exceptions.h: Update comments to avoid mentioning catch_errors.
(catch_errors_ftype, catch_errors): Delete.
* infrun.c (normal_stop): Use TRY/CATCH instead of catch_errors.
(hook_stop_stub): Delete.
(restore_selected_frame): Change return type to void, and
parameter type to const frame_id &.
(restore_infcall_control_state): Use TRY/CATCH instead of
catch_errors.
* main.c (captured_command_loop): Return void and remove
parameter. Remove references to catch_errors.
(captured_main): Use TRY/CATCH instead of catch_errors.
* objc-lang.c (objc_submethod_helper_data)
(find_objc_msgcall_submethod_helper): Delete.
(find_objc_msgcall_submethod): Use TRY/CATCH instead of
catch_errors.
* record-full.c (record_full_message): Return void.
(record_full_message_args, record_full_message_wrapper): Delete.
(record_full_message_wrapper_safe): Return bool and use TRY/CATCH
instead of catch_errors.
* solib-aix.c (solib_aix_open_symbol_file_object): Change
parameter type to int.
* solib-darwin.c (open_symbol_file_object): Ditto.
* solib-dsbt.c (open_symbol_file_object): Ditto.
* solib-frv.c (open_symbol_file_object): Ditto.
* solib-svr4.c (open_symbol_file_object): Ditto.
* solib-target.c (solib_target_open_symbol_file_object): Ditto.
* solib.c (update_solib_list): Use TRY/CATCH instead of
catch_errors.
* solist.h (struct target_so_ops) <open_symbol_file_object>:
Change type.
* symmisc.c (struct print_symbol_args): Remove.
(dump_symtab_1): Use TRY/CATCH instead of catch_errors.
(print_symbol): Change type.
* windows-nat.c (handle_load_dll, handle_unload_dll): Return void
and remove parameters.
(catch_errors): New.
(get_windows_debug_event): Adjust.
gdb/testsuite/ChangeLog:
2017-10-10 Pedro Alves <palves@redhat.com>
* lib/selftest-support.exp (selftest_setup): Update for
captured_command_loop's prototype change.
|
|
One spot in gdb uses a cleanup to free a splay tree. This patch
introduces a unique_ptr specialization for this case.
ChangeLog
2017-10-09 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (free_splay_tree): Remove.
(list_available_thread_groups): Use splay_tree_up.
* common/gdb_splay_tree.h: New file.
|
|
While we still have cleanups (i.e., make_cleanup & co), we must be
sure to add END_CATCH at the end of a TRY/CATCH/END_CATCH construct.
However, it's currently too easy to miss adding the END_CATCH, because
the code compiles anyway without it. I realized this when I noticed
that another patch I was working on missed several adding END_CATCH in
several new TRY/CATCH uses.
This commit fixes that by making TRY open a new scope that is only
closed by END_CATCH. This way, if you forget to add the END_CATCH,
then compilation fails due to the unbalanced curly braces.
This caught a couple places where we were missing END_CATCH in current
master, also fixed by the patch.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (complete_command): Add missing END_CATCH.
* common/common-exceptions.h (TRY): Open an outermost scope.
Expand intro comment.
(CATCH): Reindent.
(END_CATCH): Close the outermost scope.
* completer.c (complete_line_internal): Add missing END_CATCH.
|
|
This is the "natural" extension necessary for the "set cwd" command
(and the whole "set the inferior's cwd" logic) to work on gdbserver.
The idea here is to have a new remote packet, QSetWorkingDir (name
adopted from LLDB's extension to the RSP, as can be seen at
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>),
which sends an hex-encoded string representing the working directory
that the remote inferior will use. There is a slight difference from
the packet proposed by LLDB: GDB's version will accept empty
arguments, meaning that the user wants to clear the previously set
working directory for the inferior (i.e., "set cwd" without arguments
on GDB).
For UNIX-like targets this feature is already implemented on
nat/fork-inferior.c, and all gdbserver has to do is to basically
implement "set_inferior_cwd" and call it whenever such packet arrives.
For other targets, like Windows, it is possible to use the existing
"get_inferior_cwd" function and do the necessary steps to make sure
that the inferior will use the specified working directory.
Aside from that, the patch consists basically of updates to the
testcase (making it available on remote targets) and the
documentation.
No regressions found.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry about new
'set-cwd-on-gdbserver' feature.
(New remote packets): Add entry for QSetWorkingDir.
* common/common-inferior.h (set_inferior_cwd): New prototype.
* infcmd.c (set_inferior_cwd): Remove "static".
(show_cwd_command): Expand text to include remote debugging.
* remote.c: Add PACKET_QSetWorkingDir.
(remote_protocol_features) <QSetWorkingDir>: New entry for
PACKET_QSetWorkingDir.
(extended_remote_set_inferior_cwd): New function.
(extended_remote_create_inferior): Call
"extended_remote_set_inferior_cwd".
(_initialize_remote): Call "add_packet_config_cmd" for
QSetWorkingDir.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (set_inferior_cwd): New function.
* server.c (handle_general_set): Handle QSetWorkingDir packet.
(handle_query): Inform that QSetWorkingDir is supported.
* win32-low.c (create_process): Pass the inferior's cwd to
CreateProcess.
gdb/testsuite/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/set-cwd.exp: Make it available on
native-extended-gdbserver.
gdb/doc/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting your Program) <The working directory.>:
Mention remote debugging.
(Working Directory) <Your Program's Working Directory>:
Likewise.
(Connecting) <Remote Packet>: Add "set-working-dir"
and "QSetWorkingDir" to the table.
(Remote Protocol) <QSetWorkingDir>: New item, explaining the
packet.
|
|
This commit adds new "set/show cwd" commands, which are used to
set/show the current working directory of the inferior that will be
started.
The idea here is that "set cwd" will become the de facto way of
setting the inferior's cwd. Currently, the user can use "cd" for
that, but there are side effects: with "cd", GDB also switches to
another directory, and that can impact the loading of scripts and
other files. With "set cwd", we separate the logic into a new
command.
To maintain backward compatibility, if the user issues a "cd" command
but doesn't use "set cwd", then the inferior's cwd will still be
changed according to what the user specified. However, "set cwd" has
precedence over "cd", so it can always be used to override it.
"set cwd" works in the following way:
- If the user sets the inferior's cwd by using "set cwd", then this
directory is saved into current_inferior ()->cwd and is used when
the inferior is started (see below).
- If the user doesn't set the inferior's cwd by using "set cwd", but
rather use the "cd" command as before, then this directory is
inherited by the inferior because GDB will have chdir'd into it.
On Unix-like hosts, the way the directory is changed before the
inferior execution is by expanding the user set directory before the
fork, and then "chdir" after the call to fork/vfork on
"fork_inferior", but before the actual execution. On Windows, the
inferior cwd set by the user is passed directly to the CreateProcess
call, which takes care of the actual chdir for us.
This way, we'll make sure that GDB's cwd is not affected by the user
set cwd.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (New commands): Mention "set/show cwd".
* cli/cli-cmds.c (_initialize_cli_cmds): Mention "set cwd" on
"cd" command's help text.
* common/common-inferior.h (get_inferior_cwd): New prototype.
* infcmd.c (inferior_cwd_scratch): New global variable.
(set_inferior_cwd): New function.
(get_inferior_cwd): Likewise.
(set_cwd_command): Likewise.
(show_cwd_command): Likewise.
(_initialize_infcmd): Add "set/show cwd" commands.
* inferior.h (class inferior) <cwd>: New field.
* nat/fork-inferior.c: Include "gdb_tilde_expand.h".
(fork_inferior): Change inferior's cwd before its execution.
* windows-nat.c (windows_create_inferior): Pass inferior's cwd
to CreateProcess.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (current_inferior_cwd): New global variable.
(get_inferior_cwd): New function.
* inferiors.h (struct process_info) <cwd>: New field.
gdb/doc/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting your Program) <The working directory.>:
Mention new "set cwd" command.
(Working Directory) <Your Program's Working Directory>:
Rephrase to explain that "set cwd" exists and is the default
way to change the inferior's cwd.
gdb/testsuite/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/set-cwd.c: New file.
* gdb.base/set-cwd.exp: Likewise.
|
|
Currently, whenever we want to handle paths provided by the user and
perform tilde expansion on GDB, we rely on "tilde_expand", which comes
from readline. This was enough for our use cases so far, but the
situation will change when we start dealing with paths on gdbserver as
well, which is what the next patches implement.
Unfortunately it is not possible to use "tilde_expand" in this case
because gdbserver doesn't use readline. For that reason I decided to
implement a new "gdb_tilde_expand" function, which is basically a
wrapper for "glob" and its GNU extension, GLOB_TILDE_CHECK. With the
import of the "glob" module from gnulib, we're sure that "glob" always
supports this extension.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add gdb_tilde_expand.c.
(HFILES_NO_SRCDIR): Add gdb_tilde_expand.h.
(COMMON_OBS): Add gdb_tilde_expand.o.
* common/gdb_tilde_expand.c: New file.
* common/gdb_tilde_expand.h: Likewise.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add $(srcdir)/common/gdb_tilde_expand.c.
(OBS): Add gdb_tilde_expand.o.
|
|
This adds string_vprintf, a va_list variant of string_printf. This
will be used in later patches.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* unittests/common-utils-selftests.c (format): New function.
(string_vprintf_tests): New function.
(_initialize_common_utils_selftests): Register new tests.
* common/common-utils.c (string_vprintf): New function.
* common/common-utils.h (string_vprintf): Declare.
|
|
I ran into non-const unpack_varlen_hex while working on something
else, and decided to just fix it first. Ends up constifying a good
deal of remote packet parsing.
gdb/ChangeLog:
2017-09-29 Pedro Alves <palves@redhat.com>
* common/rsp-low.c (unpack_varlen_hex): Constify.
* common/rsp-low.h (unpack_varlen_hex): Constify.
* linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
Constify.
* remote.c (remote_set_permissions, read_ptid)
(remote_current_thread, remote_get_threads_with_qthreadinfo)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(stop_reply_extract_thread, remote_parse_stop_reply): Constify.
* tracepoint.c (parse_trace_status, parse_tracepoint_status)
(parse_tracepoint_definition, parse_tsv_definition)
(parse_static_tracepoint_marker_definition): Constify.
* tracepoint.h (parse_static_tracepoint_marker_definition)
(parse_trace_status, parse_tracepoint_status)
(parse_tracepoint_definition, parse_tsv_definition): Constify.
gdb/gdbserver/ChangeLog:
2017-09-29 Pedro Alves <palves@redhat.com>
* ax.c (gdb_parse_agent_expr): Constify.
* ax.h (gdb_parse_agent_expr): Constify.
* mem-break.c (add_breakpoint_condition, add_breakpoint_commands):
Constify.
* mem-break.h (add_breakpoint_condition, add_breakpoint_commands): Constify.
* remote-utils.c (hex_or_minus_one, read_ptid): Constify.
* remote-utils.h (read_ptid): Constify.
* server.c (handle_qxfer_exec_file, handle_query, handle_v_cont)
(process_point_options, process_serial_event): Constify.
* tracepoint.c (add_tracepoint_action, cmd_qtdp, cmd_qtdpsrc)
(cmd_qtdv, cmd_qtenable_disable, cmd_qtro, cmd_qtframe, cmd_qtp)
(cmd_qtbuffer): Constify.
|
|
We have many classes that copy cotr and assignment operator are deleted,
so this patch replaces these existing mechanical code with macro
DISABLE_COPY_AND_ASSIGN.
gdb:
2017-09-19 Yao Qi <yao.qi@linaro.org>
* annotate.h (struct annotate_arg_emitter): Use
DISABLE_COPY_AND_ASSIGN.
* common/refcounted-object.h (refcounted_object): Likewise.
* completer.h (struct completion_result): Likewise.
* dwarf2read.c (struct dwarf2_per_objfile): Likewise.
* filename-seen-cache.h (filename_seen_cache): Likewise.
* gdbcore.h (thread_section_name): Likewise.
* gdb_regex.h (compiled_regex): Likewise.
* gdbthread.h (scoped_restore_current_thread): Likewise.
* inferior.h (scoped_restore_current_inferior): Likewise.
* jit.c (jit_reader): Likewise.
* linespec.h (struct linespec_result): Likewise.
* mi/mi-parse.h (struct mi_parse): Likewise.
* nat/fork-inferior.c (execv_argv): Likewise.
* progspace.h (scoped_restore_current_program_space): Likewise.
* python/python-internal.h (class gdbpy_enter): Likewise.
* regcache.h (regcache): Likewise.
* target-descriptions.c (struct tdesc_reg): Likewise.
(struct tdesc_type): Likewise.
(struct tdesc_feature): Likewise.
* ui-out.h (ui_out_emit_type): Likewise.
|
|
This is a simple replacement, it allows removing some manual free'ing in
the callers.
gdb/ChangeLog:
* common/buffer.c (buffer_xml_printf): Adjust.
* common/xml-utils.c (xml_escape_text): Change return type to
std::string, update code accordingly.
* common/xml-utils.h (xml_escape_text): Change return type to
std::string.
* rs6000-aix-tdep.c (rs6000_aix_shared_library_to_xml): Adjust.
* windows-tdep.c (windows_xfer_shared_library): Adjust.
* unittests/xml-utils-selftests.c (test_xml_escape_text):
Adjust.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_qxfer_libraries_svr4): Adjust to change of
return type of xml_escape_text.
* server.c (emit_dll_description): Likewise.
|
|
With the growing number of selftests, I think it would be useful to be
able to run only a subset of the tests. This patch associates a name to
each registered selftest. It then allows doing something like:
(gdb) maintenance selftest aarch64
Running self-tests.
Running selftest aarch64-analyze-prologue.
Running selftest aarch64-process-record.
Ran 2 unit tests, 0 failed
or with gdbserver:
./gdbserver --selftest=aarch64
In both cases, only the tests that contain "aarch64" in their name are
ran. To help validate that the tests you want to run were actually ran,
it also prints a message with the test name before running each test.
Right now, all the arch-dependent tests are registered as a single test
of the selftests. To be able to filter those too, I made them
"first-class citizen" selftests. The selftest type is an interface,
with different implementations for "simple selftests" and "arch
selftests". The run_tests function simply iterates on that an invokes
operator() on each test.
I changed the tests data structure from a vector to a map, because
- it allows iterating in a stable (alphabetical) order
- it allows to easily verify if a test with a given name has been
registered, to avoid duplicates
There's also a new command "maintenance info selftests" that lists the
registered selftests.
gdb/ChangeLog:
* common/selftest.h (selftest): New struct/interface.
(register_test): Add name parameter, add new overload.
(run_tests): Add filter parameter.
(for_each_selftest_ftype): New typedef.
(for_each_selftest): New declaration.
* common/selftest.c (tests): Change type to
map<string, unique_ptr<selftest>>.
(simple_selftest): New struct.
(register_test): New function.
(register_test): Add name parameter and use it.
(run_tests): Add filter parameter and use it. Add prints.
Adjust to vector -> map change.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add names when
registering selftests.
* arm-tdep.c (_initialize_arm_tdep): Likewise.
* disasm-selftests.c (_initialize_disasm_selftests): Likewise.
* dwarf2-frame.c (_initialize_dwarf2_frame): Likewise.
* dwarf2loc.c (_initialize_dwarf2loc): Likewise.
* findvar.c (_initialize_findvar): Likewise.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Likewise.
* maint.c (maintenance_selftest): Update call to run_tests.
(maintenance_info_selftests): New function.
(_initialize_maint_cmds): Register "maintenance info selftests"
command. Update "maintenance selftest" doc.
* regcache.c (_initialize_regcache): Add names when registering
selftests.
* rust-exp.y (_initialize_rust_exp): Likewise.
* selftest-arch.c (gdbarch_selftest): New struct.
(gdbarch_tests): Remove.
(register_test_foreach_arch): Add name parameter. Call
register_test.
(tests_with_arch): Remove, move most content to
gdbarch_selftest::operator().
(_initialize_selftests_foreach_arch): Remove.
* selftest-arch.h (register_test_foreach_arch): Add name
parameter.
(run_tests_with_arch): New declaration.
* utils-selftests.c (_initialize_utils_selftests): Add names
when registering selftests.
* utils.c (_initialize_utils): Likewise.
* unittests/array-view-selftests.c
(_initialize_array_view_selftests): Likewise.
* unittests/environ-selftests.c (_initialize_environ_selftests):
Likewise.
* unittests/function-view-selftests.c
(_initialize_function_view_selftests): Likewise.
* unittests/offset-type-selftests.c
(_initialize_offset_type_selftests): Likewise.
* unittests/optional-selftests.c
(_initialize_optional_selftests): Likewise.
* unittests/scoped_restore-selftests.c
(_initialize_scoped_restore_selftests): Likewise.
* NEWS: Document "maintenance selftest" and "maint info
selftests".
gdb/gdbserver/ChangeLog:
* server.c (captured_main): Accept argument for --selftest.
Update run_tests call.
* linux-x86-tdesc-selftest.c (initialize_low_tdesc): Add names
when registering selftests.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Document filter parameter
of "maint selftest". Document "maint info selftests" command.
|
|
This renames a few functions -- skip_spaces_const,
skip_to_space_const, get_number_const, extract_arg_const -- to drop
the "_const" suffix and instead rely on overloading.
This makes future const fixes simpler by reducing the number of lines
that must be changed. I think it is also not any less clear, as all
these functions have the same interface as their non-const versions by
design. Furthermore there's an example of using an overload in-tree
already, namely check_for_argument.
This patch was largely created using some perl one-liners; then a few
fixes were applied by hand.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* common/common-utils.h (skip_to_space): Remove macro, redeclare
as function.
(skip_to_space): Rename from skip_to_space_const.
* common/common-utils.c (skip_to_space): New function.
(skip_to_space): Rename from skip_to_space_const.
* cli/cli-utils.h (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
* cli/cli-utils.c (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
(number_or_range_parser::get_number): Use ::get_number.
* aarch64-linux-tdep.c, ada-lang.c, arm-linux-tdep.c, ax-gdb.c,
break-catch-throw.c, breakpoint.c, cli/cli-cmds.c, cli/cli-dump.c,
cli/cli-script.c, cli/cli-setshow.c, compile/compile.c,
completer.c, demangle.c, disasm.c, findcmd.c, linespec.c,
linux-tdep.c, linux-thread-db.c, location.c, mi/mi-parse.c,
minsyms.c, nat/linux-procfs.c, printcmd.c, probe.c,
python/py-breakpoint.c, record.c, rust-exp.y, serial.c, stack.c,
stap-probe.c, tid-parse.c, tracepoint.c: Update all callers.
|
|
An array_view is an abstraction that provides a non-owning view over a
sequence of contiguous objects.
A way to put it is that array_view is to std::vector (and std::array
and built-in arrays with rank==1) like std::string_view is to
std::string.
The main intent of array_view is to use it as function input parameter
type, making it possible to pass in any sequence of contiguous
objects, irrespective of whether the objects live on the stack or heap
and what actual container owns them. Implicit construction from the
element type is supported too, making it easy to call functions that
expect an array of elements when you only have one element (usually on
the stack). For example:
struct A { .... };
void function (gdb::array_view<A> as);
std::vector<A> std_vec = ...;
std::array<A, N> std_array = ...;
A array[] = {...};
A elem;
function (std_vec);
function (std_array);
function (array);
function (elem);
Views can be either mutable or const. A const view is simply created
by specifying a const T as array_view template parameter, in which
case operator[] of non-const array_view objects ends up returning
const references. (Making the array_view itself const is analogous to
making a pointer itself be const. I.e., disables re-seating the
view/pointer.) Normally functions will pass around array_views by
value.
Uses of gdb::array_view (other than the ones in the unit tests) will
be added in a follow up patch.
gdb/ChangeLog
2017-09-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/array-view-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add array-view-selftests.o.
* common/array-view.h: New file.
* unittests/array-view-selftests.c: New file.
|
|
starting the inferior
This patch implements the ability to set/unset environment variables
on the remote target, mimicking what GDB already offers to the user.
There are two features present here: user-set and user-unset
environment variables.
User-set environment variables are only the variables that are
explicitly set by the user, using the 'set environment' command. This
means that variables that were already present in the environment when
starting GDB/GDBserver are not transmitted/considered by this feature.
User-unset environment variables are variables that are explicitly
unset by the user, using the 'unset environment' command.
The idea behind this patch is to store user-set and user-unset
environment variables in two separate sets, both part of gdb_environ.
Then, when extended_remote_create_inferior is preparing to start the
inferior, it will iterate over the two sets and set/unset variables
accordingly. Three new packets are introduced:
- QEnvironmentHexEncoded, which is used to set environment variables,
and contains an hex-encoded string in the format "VAR=VALUE" (VALUE
can be empty if the user set a variable with a null value, by doing
'set environment VAR=').
- QEnvironmentUnset, which is used to unset environment variables, and
contains an hex-encoded string in the format "VAR".
- QEnvironmentReset, which is always the first packet to be
transmitted, and is used to reset the environment, i.e., discard any
changes made by the user on previous runs.
The QEnvironmentHexEncoded packet is inspired on LLDB's extensions to
the RSP. Details about it can be seen here:
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>
I decided not to implement the QEnvironment packet because it is
considered deprecated by LLDB. This packet, on LLDB, serves the same
purpose of QEnvironmentHexEncoded, but sends the information using a
plain text, non-hex-encoded string.
The other two packets are new.
This patch also includes updates to the documentation, testsuite, and
unit tests, without introducing regressions.
gdb/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry mentioning new support
for setting/unsetting environment variables on the remote target.
(New remote packets): Add entries for QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
* common/environ.c (gdb_environ::operator=): Extend method to
handle m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::clear): Likewise.
(match_var_in_string): Change type of first parameter from 'char
*' to 'const char *'.
(gdb_environ::set): Extend method to handle
m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::unset): Likewise.
(gdb_environ::clear_user_set_env): New method.
(gdb_environ::user_set_envp): Likewise.
(gdb_environ::user_unset_envp): Likewise.
* common/environ.h (gdb_environ): Handle m_user_set_env_list and
m_user_unset_env_list on move constructor/assignment.
(unset): Add new default parameter 'update_unset_list = true'.
(clear_user_set_env): New method.
(user_set_envp): Likewise.
(user_unset_envp): Likewise.
(m_user_set_env_list): New std::set.
(m_user_unset_env_list): Likewise.
* common/rsp-low.c (hex2str): New function.
(bin2hex): New overload for bin2hex function.
* common/rsp-low.c (hex2str): New prototype.
(str2hex): New overload prototype.
* remote.c: Include "environ.h". Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
(remote_protocol_features): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(send_environment_packet): New function.
(extended_remote_environment_support): Likewise.
(extended_remote_create_inferior): Call
extended_remote_environment_support.
(_initialize_remote): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packet configs.
* unittests/environ-selftests.c (gdb_selftest_env_var):
New variable.
(test_vector_initialization): New function.
(test_init_from_host_environ): Likewise.
(test_reinit_from_host_environ): Likewise.
(test_set_A_unset_B_unset_A_cannot_find_A_can_find_B):
Likewise.
(test_unset_set_empty_vector): Likewise.
(test_vector_clear): Likewise.
(test_std_move): Likewise.
(test_move_constructor):
(test_self_move): Likewise.
(test_set_unset_reset): Likewise.
(run_tests): Rewrite in terms of the functions above.
gdb/gdbserver/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(handle_query): Inform remote that QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset are supported.
gdb/doc/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (set environment): Add @anchor. Explain that
environment variables set by the user are sent to GDBserver.
(unset environment): Likewise, but for unsetting variables.
(Connecting) <Remote Packet>: Add "environment-hex-encoded",
"QEnvironmentHexEncoded", "environment-unset", "QEnvironmentUnset",
"environment-reset" and "QEnvironmentReset" to the table.
(Remote Protocol) <QEnvironmentHexEncoded, QEnvironmentUnset,
QEnvironmentReset>: New item, explaining the packet.
gdb/testsuite/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/share-env-with-gdbserver.c: New file.
* gdb.base/share-env-with-gdbserver.exp: Likewise.
|
|
This patch uses GDB self test in GDBserver. The self tests are run if
GDBserver is started with option --selftest.
gdb:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* NEWS: Mention GDBserver's new option "--selftest".
* Makefile.in (SFILES): Remove selftest.c, add common/selftest.c.
* selftest.c: Move it to common/selftest.c.
* selftest.h: Move it to common/selftest.h.
* selftest-arch.c (reset): New function.
(tests_with_arch): Call reset.
gdb/gdbserver:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* Makefile.in (OBS): Add selftest.o.
* configure.ac: AC_DEFINE GDB_SELF_TEST if $development.
* configure, config.in: Re-generated.
* server.c: Include common/sefltest.h.
(captured_main): Handle option --selftest.
gdb/testsuite:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.server/unittest.exp: New.
gdb/doc:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Server): Document "--selftest".
|
|
Currently, if you try to use the array version of
gdb::unique_xmalloc_ptr (i.e., std::unique_ptr) in order to have
access to operator[], like:
gdb::unique_xmalloc_ptr<char[]> buf ((char *) xmalloc (10));
return buf[0];
then the build fails, like:
/usr/include/c++/5.3.1/bits/unique_ptr.h: In instantiation of ‘std::unique_ptr<_Tp [], _Dp>::~unique_ptr() [with _Tp = char; _Dp = gdb::xfree_deleter<char []>]’:
main.c:30:61: required from here
/usr/include/c++/5.3.1/bits/unique_ptr.h:484:17: error: no match for call to ‘(std::unique_ptr<char [], gdb::xfree_deleter<char []> >::deleter_type {aka gdb::xfree_deleter<char []>}) (char*&)’
get_deleter()(__ptr);
^
In file included from src/gdb/common/common-defs.h:92:0,
from src/gdb/defs.h:28,
from src/gdb/main.c:20:
src/gdb/common/gdb_unique_ptr.h:34:8: note: candidate: void gdb::xfree_deleter<T>::operator()(T*) const [with T = char []]
void operator() (T *ptr) const { xfree (ptr); }
^
src/gdb/common/gdb_unique_ptr.h:34:8: note: no known conversion for argument 1 from ‘char*’ to ‘char (*)[]’
Makefile:1911: recipe for target 'main.o' failed
make: *** [main.o] Error 1
The problem is that we're missing an xfree_deleter specialization for
arrays.
gdb/ChangeLog:
2017-08-10 Pedro Alves <palves@redhat.com>
* common/gdb_unique_ptr.h (xfree_deleter<T[]>): Define.
|
|
This introduces gdb_file_up, a unique pointer holding a FILE*, and
then changes some code in gdb to use it. In particular
gdb_fopen_cloexec now returns a gdb_file_up. This allow removing some
cleanups.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* xml-support.c (xml_fetch_content_from_file): Update.
* ui-file.c (stdio_file::open): Update.
* tracefile-tfile.c (tfile_start): Update.
* remote.c (remote_file_put, remote_file_get): Update.
* nat/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_get_state, linux_proc_tid_get_name): Update.
* nat/linux-osdata.c (linux_common_core_of_thread): Update.
(command_from_pid, commandline_from_pid, linux_xfer_osdata_cpus)
(print_sockets, linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Update.
* nat/linux-btrace.c (linux_determine_kernel_start): Update.
* linux-nat.c (linux_proc_pending_signals): Update.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_file_up.
(file_closer): Remove.
* compile/compile.c (compile_to_object): Update.
* common/filestuff.h (struct gdb_file_deleter): New.
(gdb_file_up): New typedef.
(gdb_fopen_cloexec): Change return type.
* common/filestuff.c (gdb_fopen_cloexec): Return gdb_file_up.
* cli/cli-dump.c (fopen_with_cleanup): Remove.
(dump_binary_file, restore_binary_file): Update.
* auto-load.c (auto_load_objfile_script_1): Update.
|
|
gdb/ChangeLog:
* buffer.h (buffer_finish): Fix spelling mistakes.
|
|
clang has a too aggressive (or broken, depends on how you want to see
it) -Wunused-function warning, which is triggered by the functions
defined by DEF_VEC_* but not used in the current source file. Normally,
it won't warn about unused static inline functions defined in header
files, because it's expected that a source file won't use all functions
defined in a header file it includes. However, if the DEF_VEC_* macro
is used in a source file, it considers those functions as defined in the
source file, which leads it to think that we should remove those
functions. It is therefore missing a check to see whether those
functions are resulting from macro expansion. A bug already exists for
that:
https://bugs.llvm.org//show_bug.cgi?id=22712
It's quite easy to silence this warning in a localized way, that is in
the DEF_VEC_* macros.
gdb/ChangeLog:
* common/diagnostics.h: Define macros for GCC.
(DIAGNOSTIC_IGNORE_UNUSED_FUNCTION): New macro.
* common/vec.h: Include diagnostics.h.
(DIAGNOSTIC_IGNORE_UNUSED_VEC_FUNCTION): New macro.
(DEF_VEC_I, DEF_VEC_P, DEF_VEC_O): Ignore -Wunused-function
warning.
|
|
Some older versions of flex (such as the one shipped with macOS) generate
code that use the register keyword, which clang warns about. This patch
makes the compiler ignore those warnings for the portion of the code
generated by flex.
gdb/ChangeLog:
* common/diagnostics.h (DIAGNOSTIC_IGNORE_DEPRECATED_REGISTER):
New macro.
* ada-lex.l: Ignore deprecated register warnings.
|
|
gdb_environ::unset iterates using '.end () - 1' now, instead of '.cend
() - 1'. This obvious patch updates the comment.
gdb/ChangeLog:
2017-06-22 Sergio Durigan Junior <sergiodj@redhat.com>
* common/environ.c (gdb_environ::unset): Update comment.
|
|
clang gives this warning:
..../gdb/unittests/environ-selftests.c:139:7: error: explicitly moving variable of type 'gdb_environ' to itself [-Werror,-Wself-move]
env = std::move (env);
~~~ ^ ~~~
Ignoring the warning locally is the right thing to do, since it warns
about behavior we want to unit test, while an explicit self-move in
real code would likely be a mistake that we'd want to catch.
To avoid cluttering the code with preprocessor conditionals, this
commit adds the file common/diagnostics.h, in which we can put macros
used to control compiler diagnostics.
GCC enhancement request here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81159
gdb/ChangeLog:
2017-06-22 Pedro Alves <palves@redhat.com>
Simon Marchi <simon.marchi@ericsson.com>
* unittests/environ-selftests.c (run_tests): Ignore -Wself-move
warning.
* common/diagnostics.h: New file.
|
|
We have several copies of this common idiom under gdb/ currently.
This commit moves them / factors them out to gdb/common/preprocessor.h.
gdb/ChangeLog:
2017-06-22 Pedro Alves <palves@redhat.com>
* common/agent.h: Include "common/preprocessor.h".
(STRINGIZE_1, STRINGIZE): Delete.
(IPA_SYM): Use STRINGIFY instead.
* common/preprocessor.h (STRINGIFY_1, STRINGIFY): New.
* compile/compile-c-support.c: Include "common/preprocessor.h".
(STR, STRINGIFY): Delete.
* ia64-libunwind-tdep.c: Include "common/preprocessor.h".
(STRINGIFY2, STRINGIFY): Delete.
|
|
gdb/ChangeLog:
2017-06-22 Pedro Alves <palves@redhat.com>
* common/agent.h: Add include guards.
|
|
breakage on early versions of libstdc++)
Even though C++11 supports modifying containers using a const_iterator
(e.g., calling the 'erase' method of a std::vector), early versions of
libstdc++ did not implement that. Some of our buildslaves are using
these versions (e.g., the AArch64 buildslave uses gcc 4.8.8), and my
previous commit causes a breakage on them. The solution is simple:
just use a normal iterator, without const.
gdb/ChangeLog:
2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com>
* common/environ.c (gdb_environ::unset): Use '::iterator' instead
of '::const_iterator'.
|
|
As part of the preparation necessary for my upcoming task, I'd like to
propose that we turn gdb_environ into a class. The approach taken
here is simple: the class gdb_environ contains everything that is
needed to manipulate the environment variables. These variables are
stored in an std::vector<char *>, which can be converted to a 'char
**' and passed as argument to functions that need it.
The usage has not changed much. As per Pedro's suggestion, this class
uses a static factory method initialization. This means that when an
instance is created, it is initially empty. When needed, it has to be
initialized using the static method 'from_host_environ'.
As mentioned before, this is a preparation for an upcoming work that I
will be posting in the next few weeks or so. For that work, I'll
probably create another data structure that will contain all the
environment variables that were set by the user using the 'set
environment' command, because I'll need access to them. This will be
much easier with the class-ification of gdb_environ.
As noted, this has been regression-tested with the new version of
environ.exp and no regressions were found.
gdb/ChangeLog:
2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
'unittests/environ-selftests.c'.
(SUBDIR_UNITTESTS_OBS): Add 'environ-selftests.o'.
* charset.c (find_charset_names): Declare object 'iconv_env'.
Update code to use 'iconv_env' object. Remove call to
'free_environ'.
* common/environ.c: Include <utility>.
(make_environ): Delete function.
(free_environ): Delete function.
(gdb_environ::clear): New function.
(gdb_environ::operator=): New function.
(gdb_environ::get): Likewise.
(environ_vector): Delete function.
(set_in_environ): Delete function.
(gdb_environ::set): New function.
(unset_in_environ): Delete function.
(gdb_environ::unset): New function.
(gdb_environ::envp): Likewise.
* common/environ.h: Include <vector>.
(struct gdb_environ): Delete; transform into...
(class gdb_environ): ... this class.
(free_environ): Delete prototype.
(init_environ, get_in_environ, set_in_environ, unset_in_environ,
environ_vector): Likewise.
* infcmd.c (run_command_1): Update code to call
'envp' from 'gdb_environ' class.
(environment_info): Update code to call methods from 'gdb_environ'
class.
(unset_environment_command): Likewise.
(path_info): Likewise.
(path_command): Likewise.
* inferior.c (inferior::~inferior): Delete call to 'free_environ'.
(inferior::inferior): Initialize 'environment' using the host's
information.
* inferior.h: Remove forward declaration of 'struct gdb_environ'.
Include "environ.h".
(class inferior) <environment>: Change type from 'struct
gdb_environ' to 'gdb_environ'.
* mi/mi-cmd-env.c (mi_cmd_env_path): Update code to call
methods from 'gdb_environ' class.
* solib.c (solib_find_1): Likewise
* unittests/environ-selftests.c: New file.
gdb/gdbserver/ChangeLog:
2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com>
* linux-low.c (linux_create_inferior): Adjust code to access the
environment information via 'gdb_environ' class.
* lynx-low.c (lynx_create_inferior): Likewise.
* server.c (our_environ): Make it an instance of 'gdb_environ'.
(get_environ): Return a pointer to 'our_environ'.
(captured_main): Initialize 'our_environ'.
* server.h (get_environ): Adjust prototype.
* spu-low.c (spu_create_inferior): Adjust code to access the
environment information via 'gdb_environ' class.
|
|
In some cases we've been replacing heap-allocated gdb_byte buffers
managed with xmalloc/make_cleanup(xfree) with gdb::vector<gdb_byte>.
That usually pessimizes the code a little bit because std::vector
value-initializes elements (which for gdb_byte means
zero-initialization), while if you're creating a temporary buffer,
you're most certaintly going to fill it in with some data. An
alternative is to use
unique_ptr<gdb_byte[]> buf (new gdb_byte[size]);
but it looks like that's not very popular.
Recently, a use of obstacks in dwarf2read.c was replaced with
std::vector<gdb_byte> and that as well introduced a pessimization for
always memsetting the buffer when it's garanteed that the zeros will
be overwritten immediately. (see dwarf2read.c change in this patch to
find it.)
So here's a different take at addressing this issue "by design":
#1 - Introduce default_init_allocator<T>
I.e., a custom allocator that does default construction using default
initialization, meaning, no more zero initialization. That's the
default_init_allocation<T> class added in this patch.
See "Notes" at
<http://en.cppreference.com/w/cpp/container/vector/resize>.
#2 - Introduce def_vector<T>
I.e., a convenience typedef, because typing the allocator is annoying:
using def_vector<T> = std::vector<T, gdb::default_init_allocator<T>>;
#3 - Introduce byte_vector
Because gdb_byte vectors will be the common thing, add a convenience
"byte_vector" typedef:
using byte_vector = def_vector<gdb_byte>;
which is really the same as:
std::vector<gdb_byte, gdb::default_init_allocator<gdb_byte>>;
The intent then is to make "gdb::byte_vector" be the go-to for dynamic
byte buffers. So the less friction, the better.
#4 - Adjust current code to use it.
To set the example going forward. Replace std::vector uses and also
unique_ptr<byte[]> uses.
One nice thing is that with this allocator, for changes like these:
-std::unique_ptr<byte[]> buf (new gdb_byte[some_size]);
+gdb::byte_vector buf (some_size);
fill_with_data (buf.data (), buf.size ());
the generated code is the same as before. I.e., the compiler
de-structures the vector and gets rid of the unused "reserved vs size"
related fields.
The other nice thing is that it's easier to write
gdb::byte_vector buf (size);
than
std::unique_ptr<gdb_byte[]> buf (new gdb_byte[size]);
or even (C++14):
auto buf = std::make_unique<gdb_byte[]> (size); // zero-initializes...
#5 - Suggest s/std::vector<gdb_byte>/gdb::byte_vector/ going forward.
Note that this commit actually fixes a couple of bugs where the current
code is incorrectly using "std::vector::reserve(new_size)" and then
accessing the vector's internal buffer beyond the vector's size: see
dwarf2loc.c and charset.c. That's undefined behavior and may trigger
debug mode assertion failures. With default_init_allocator,
"resize()" behaves like "reserve()" performance wise, in that it
leaves new elements with unspecified values, but, it does that safely
without triggering undefined behavior when you access those values.
gdb/ChangeLog:
2017-06-14 Pedro Alves <palves@redhat.com>
* ada-lang.c: Include "common/byte-vector.h".
(ada_value_primitive_packed_val): Use gdb::byte_vector.
* charset.c (wchar_iterator::iterate): Resize the vector instead
of reserving it.
* common/byte-vector.h: Include "common/def-vector.h".
(wchar_iterator::m_out): Now a gdb::def_vector<gdb_wchar_t>.
* cli/cli-dump.c: Include "common/byte-vector.h".
(dump_memory_to_file, restore_binary_file): Use gdb::byte_vector.
* common/byte-vector.h: New file.
* common/def-vector.h: New file.
* common/default-init-alloc.h: New file.
* dwarf2loc.c: Include "common/byte-vector.h".
(rw_pieced_value): Use gdb::byte_vector, and resize the vector
instead of reserving it.
* dwarf2read.c: Include "common/byte-vector.h".
(data_buf::m_vec): Now a gdb::byte_vector.
* gdb_regex.c: Include "common/def-vector.h".
(compiled_regex::compiled_regex): Use gdb::def_vector<char>.
* mi/mi-main.c: Include "common/byte-vector.h".
(mi_cmd_data_read_memory): Use gdb::byte_vector.
* printcmd.c: Include "common/byte-vector.h".
(print_scalar_formatted): Use gdb::byte_vector.
* valprint.c: Include "common/byte-vector.h".
(maybe_negate_by_bytes, print_decimal_chars): Use
gdb::byte_vector.
|
|
Hi,
This bug is related to:
<https://sourceware.org/ml/gdb-patches/2017-06/msg00216.html>
On stringify_argv, we have to check if args[0] is not NULL before
stringifying anything, otherwise we might do the wrong thing when
trimming the "ret" string in the end. args[0] will be NULL when no
arguments are passed to the inferior that will be started.
Checked in as obvious.
gdb/ChangeLog:
2017-06-08 Sergio Durigan Junior <sergiodj@redhat.com>
* common/common-utils.c (stringify_argv): Check for "arg[0] !=
NULL".
|
|
This is the most important (and the biggest, sorry) patch of the
series. It moves fork_inferior from gdb/fork-child.c to
nat/fork-inferior.c and makes all the necessary adjustments to both
GDB and gdbserver to make sure everything works OK.
There is no "most important change" with this patch; all changes are
made in a progressive way, making sure that gdbserver had the
necessary features while not breaking GDB at the same time.
I decided to go ahead and implement a partial support for starting the
inferior with a shell on gdbserver, although the full feature comes in
the next patch. The user won't have the option to disable the
startup-with-shell, and also won't be able to change which shell
gdbserver will use (other than setting the $SHELL environment
variable, that is).
Everything is working as expected, and no regressions were present
during the tests.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/common-inferior.h"
and "nat/fork-inferior.h".
* common/common-inferior.h: New file, with contents from
"gdb/inferior.h".
* commom/common-utils.c: Include "common-utils.h".
(stringify_argv): New function.
* common/common-utils.h (stringify_argv): New prototype.
* configure.nat: Add "fork-inferior.o" as a dependency for
"*linux*", "fbsd*" and "nbsd*" hosts.
* corefile.c (get_exec_file): Update comment.
* darwin-nat.c (darwin_ptrace_him): Call "gdb_startup_inferior"
instead of "startup_inferior".
(darwin_create_inferior): Call "add_thread_silent" after
"fork_inferior".
* fork-child.c: Cleanup unnecessary includes.
(SHELL_FILE): Move to "common/common-fork-child.c".
(environ): Likewise.
(exec_wrapper): Initialize.
(get_exec_wrapper): New function.
(breakup_args): Move to "common/common-fork-child.c"; rename to
"breakup_args_for_exec".
(escape_bang_in_quoted_argument): Move to
"common/common-fork-child.c".
(saved_ui): New variable.
(prefork_hook): New function.
(postfork_hook): Likewise.
(postfork_child_hook): Likewise.
(gdb_startup_inferior): Likewise.
(fork_inferior): Move to "common/common-fork-child.c". Update
function to support gdbserver.
(startup_inferior): Likewise.
* gdbcore.h (get_exec_file): Remove declaration.
* gnu-nat.c (gnu_create_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* inf-ptrace.c: Include "nat/fork-inferior.h" and "utils.h".
(inf_ptrace_create_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* inferior.h: Include "common-inferior.h".
(trace_start_error): Move to "common/common-utils.h".
(trace_start_error_with_name): Likewise.
(fork_inferior): Move prototype to "nat/fork-inferior.h".
(startup_inferior): Likewise.
(gdb_startup_inferior): New prototype.
* nat/fork-inferior.c: New file, with contents from "fork-child.c".
* nat/fork-inferior.h: New file.
* procfs.c (procfs_init_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* target.h (target_terminal_init): Move prototype to
"target/target.h".
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* target/target.h (target_terminal_init): New prototype, moved
from "target.h".
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* utils.c (gdb_flush_out_err): New function.
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add "nat/fork-inferior.o".
* configure: Regenerate.
* configure.srv (srv_linux_obj): Add "fork-child.o" and
"fork-inferior.o".
(i[34567]86-*-lynxos*): Likewise.
(spu*-*-*): Likewise.
* fork-child.c: New file.
* linux-low.c: Include "common-inferior.h", "nat/fork-inferior.h"
and "environ.h".
(linux_ptrace_fun): New function.
(linux_create_inferior): Adjust function prototype to reflect
change on "target.h". Adjust function code to use
"fork_inferior".
(linux_request_interrupt): Delete "signal_pid".
* lynx-low.c: Include "common-inferior.h" and "nat/fork-inferior.h".
(lynx_ptrace_fun): New function.
(lynx_create_inferior): Adjust function prototype to reflect
change on "target.h". Adjust function code to use
"fork_inferior".
* nto-low.c (nto_create_inferior): Adjust function prototype and
code to reflect change on "target.h". Update comments.
* server.c: Include "common-inferior.h", "nat/fork-inferior.h",
"common-terminal.h" and "environ.h".
(terminal_fd): Moved to fork-child.c.
(old_foreground_pgrp): Likewise.
(restore_old_foreground_pgrp): Likewise.
(last_status): Make it global.
(last_ptid): Likewise.
(our_environ): New variable.
(startup_with_shell): Likewise.
(program_name): Likewise.
(program_argv): Rename to...
(program_args): ...this.
(wrapper_argv): New variable.
(start_inferior): Delete function.
(get_exec_wrapper): New function.
(get_exec_file): Likewise.
(get_environ): Likewise.
(prefork_hook): Likewise.
(post_fork_inferior): Likewise.
(postfork_hook): Likewise.
(postfork_child_hook): Likewise.
(handle_v_run): Update code to deal with arguments coming from the
remote host. Update calls from "start_inferior" to
"create_inferior".
(captured_main): Likewise. Initialize environment variable. Call
"have_job_control".
* server.h (post_fork_inferior): New prototype.
(get_environ): Likewise.
(last_status): Declare.
(last_ptid): Likewise.
(signal_pid): Likewise.
* spu-low.c: Include "common-inferior.h" and "nat/fork-inferior.h".
(spu_ptrace_fun): New function.
(spu_create_inferior): Adjust function prototype to reflect change
on "target.h". Adjust function code to use "fork_inferior".
* target.c (target_terminal_init): New function.
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* target.h: Include <vector>.
(struct target_ops) <create_inferior>: Update prototype.
(create_inferior): Update macro.
* utils.c (gdb_flush_out_err): New function.
* win32-low.c (win32_create_inferior): Adjust function prototype
and code to reflect change on "target.h".
gdb/testsuite/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.server/non-existing-program.exp: Update regex in order to
reflect the fact that gdbserver is now using fork_inferior (with a
shell) to startup the inferior.
|
|
GDB and gdbserver now share 'switch_to_thread' because of
fork_inferior. To make things clear, I created a new file name
common/common-gdbthread.h, and left the implementation specific to
each part.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/common-gdbthread.h".
* common/common-gdbthread.h: New file, with parts from
"gdb/gdbthread.h".
* gdbthread.h: Include "common-gdbthread.h".
(switch_to_thread): Moved to "common/common-gdbthread.h".
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (switch_to_thread): New function.
|
|
This commit moves a few bits responsible for dealing with inferior job
control from GDB to common/, which makes them available to gdbserver.
This is necessary for the upcoming patches that will share
fork_inferior et al between GDB and gdbserver.
We move some parts of gdb/terminal.h to gdb/common/common-terminal.h,
especifically the code that checks terminal features and that are used
to set job_control accordingly.
After sharing parts of gdb/terminal.h, we also to share the two
functions on gdb/inflow.c that are going to be needed by the
fork_inferior rework. They are 'gdb_setpgid' and the new
'have_job_control'. I've also taken the opportunity to give a more
meaningful name to "inflow.c" on common/. Now it is called
"job-control.c" (thanks Pedro for the suggestion).
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "common/job-control.c".
(HFILES_NO_SRCDIR): Add "common/job-control.h".
(COMMON_OBS): Add "job-control.o".
* common/job-control.c: New file, with contents from
"gdb/inflow.c".
* common/job-control.h: New file, with contents from "terminal.h".
* fork-child.c: Include "job-control.h".
* inflow.c: Include "job-control.h".
(gdb_setpgid): Move to "common/common-inflow.c".
(_initialize_inflow): Move setting of "job_control" to
"handle_job_control".
* terminal.h (job_control): Moved to "common/common-terminal.h".
(gdb_setpgid): Likewise.
* top.c: Include "job_control.h".
* utils.c: Likewise.
(job_control): Moved to "job-control.c".
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILE): Add "common/job-control.c".
(OBS): Add "job-control.o".
|
|
gdb/ChangeLog:
* common/gdb_vecs.h (DEF_VEC_I (CORE_ADDR)): Remove.
|
|
Ref: https://sourceware.org/ml/gdb-patches/2017-04/msg00660.html
Simply skip the poisoning on older compilers.
gdb/ChangeLog:
2017-04-25 Pedro Alves <palves@redhat.com>
* common/poison.h [!HAVE_IS_TRIVIALLY_COPYABLE] (IsRelocatable)
(BothAreRelocatable, memcopy, memmove): Don't define.
* common/traits.h (__has_feature, HAVE_IS_TRIVIALLY_COPYABLE): New
macros.
|
|
This patch catches invalid initialization of non-POD types with
memset, at compile time.
This is what I used to catch the problems fixed by the previous
patches in the series:
$ make -k 2>&1 | grep "deleted function"
src/gdb/breakpoint.c:951:53: error: use of deleted function ‘void* memset(T*, int, size_t) [with T = bp_location; <template-parameter-1-2> = void; size_t = long unsigned int]’
src/gdb/breakpoint.c:7325:32: error: use of deleted function ‘void* memset(T*, int, size_t) [with T = bp_location; <template-parameter-1-2> = void; size_t = long unsigned int]’
src/gdb/btrace.c:1153:42: error: use of deleted function ‘void* memset(T*, int, size_t) [with T = btrace_insn; <template-parameter-1-2> = void; size_t = long unsigned int]’
...
gdb/ChangeLog:
2017-04-25 Pedro Alves <palves@redhat.com>
* common/common-defs.h: Include "common/poison.h".
* common/function-view.h: (Not, Or, Requires): Move to traits.h
and adjust.
* common/poison.h: New file.
* common/traits.h: Include <type_traits>.
(Not, Or, Requires): New, moved from common/function-view.h.
|
|
The delete-memcpy-with-non-trivial-types patch exposed many instances
of this problem:
src/gdb/btrace.h: In function ‘btrace_insn_s* VEC_btrace_insn_s_quick_insert(VEC_btrace_insn_s*, unsigned int, const btrace_insn_s*, const char*, unsigned int)’:
src/gdb/common/vec.h:948:62: error: use of deleted function ‘void* memmove(T*, const U*, size_t) [with T = btrace_insn; U = btrace_insn; <template-parameter-1-3> = void; size_t = long unsigned int]’
memmove (slot_ + 1, slot_, (vec_->num++ - ix_) * sizeof (T)); \
^
src/gdb/common/vec.h:436:1: note: in expansion of macro ‘DEF_VEC_FUNC_O’
DEF_VEC_FUNC_O(T) \
^
src/gdb/btrace.h:84:1: note: in expansion of macro ‘DEF_VEC_O’
DEF_VEC_O (btrace_insn_s);
^
[...]
src/gdb/common/vec.h:1060:31: error: use of deleted function ‘void* memcpy(T*, const U*, size_t) [with T = btrace_insn; U = btrace_insn; <template-parameter-1-3> = void; size_t = long unsigned int]’
sizeof (T) * vec2_->num); \
^
src/gdb/common/vec.h:437:1: note: in expansion of macro ‘DEF_VEC_ALLOC_FUNC_O’
DEF_VEC_ALLOC_FUNC_O(T) \
^
src/gdb/btrace.h:84:1: note: in expansion of macro ‘DEF_VEC_O’
DEF_VEC_O (btrace_insn_s);
^
So, VECs (given it's C roots) rely on memcpy/memcpy of VEC elements to
be well defined, in order to grow/reallocate its internal elements
array. This means that we can only put trivially copyable types in
VECs. E.g., if a type requires using a custom copy/move ctor to
relocate, then we can't put it in a VEC (so we use std::vector
instead). But, as shown above, we're violating that requirement.
btrace_insn is currently not trivially copyable, because it contains
an enum_flags field, and that is itself not trivially copyable. This
patch corrects that, by simply removing the user-provided copy
constructor and assignment operator. The compiler-generated versions
work just fine.
Note that std::vector relies on std::is_trivially_copyable too to know
whether it can reallocate its elements with memcpy/memmove instead of
having to call copy/move ctors and dtors, so if we have types in
std::vectors that weren't trivially copyable because of enum_flags,
this will make such vectors more efficient.
gdb/ChangeLog:
2017-04-25 Pedro Alves <palves@redhat.com>
* common/enum-flags.h (enum_flags): Don't implement copy ctor and
assignment operator.
|
|
This patch fixes an internal error exposed by a test that does
something like:
define kill-and-remove
kill inferiors 2
remove-inferiors 2
end
# Start one inferior.
start
# Start another inferior.
add-inferior 2
inferior 2
start
# Kill and remove inferior 1 while inferior 2 is selected.
thread apply 1.1 kill-and-remove
The internal error looks like this:
Thread 1.1 (Thread 0x7ffff7fc2700 (LWP 20677)):
[Switching to inferior 1 [process 20677] (gdb/testsuite/outputs/gdb.threads/threadapply/threadapply)]
[Switching to thread 1.1 (Thread 0x7ffff7fc2700 (LWP 20677))]
#0 main () at src/gdb/testsuite/gdb.threads/threadapply.c:38
38 for (i = 0; i < NUM; i++)
src/gdb/inferior.c:66: internal-error: void set_current_inferior(inferior*): Assertion `inf != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/threadapply.exp: kill_and_remove_inferior: try kill-and-remove: thread apply 1.1 kill-and-remove (GDB internal error)
There are several problems around this area of the code. One is that
in do_restore_current_thread_cleanup, we do a look up of inferior by
ptid, which can find the wrong inferior if the previously selected
inferior exited and some other inferior was started with a reused pid
(rare, but still...).
The other problem is that the "remove-inferiors" command rejects
attempts to remove the current inferior, but when we get to
"remove-inferiors" in a "thread apply THR remove-inferiors 2" command,
the current inferior is the inferior of thread THR, not the previously
selected inferior, so if the previously selected inferior was inferior
2, that command still manages to wipe it, and then gdb restores the
old selected inferior, which is now a dangling pointer...
So the fix here is:
- Make make_cleanup_restore_current_thread store a pointer to the
previously selected inferior directly, and use it directly instead
of doing ptid look ups.
- Add a refcount to inferiors, very similar to thread_info's refcount,
that is incremented/decremented by
make_cleanup_restore_current_thread, and checked before deleting an
inferior. To avoid duplication, a new refcounted_object type is
added, that both thread_info and inferior inherit from.
gdb/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* common/refcounted-object.h: New file.
* gdbthread.h: Include "common/refcounted-object.h".
(thread_info): Inherit from refcounted_object and add comments.
(thread_info::incref, thread_info::decref)
(thread_info::m_refcount): Delete.
(thread_info::deletable): Use the refcounted_object::refcount()
method.
* inferior.c (current_inferior_): Add comment.
(set_current_inferior): Increment/decrement refcounts.
(prune_inferiors, remove_inferior_command): Skip inferiors marked
not-deletable instead of comparing with the current inferior.
(initialize_inferiors): Increment the initial inferior's refcount.
* inferior.h (struct inferior): Forward declare.
Include "common/refcounted-object.h".
(current_inferior, set_current_inferior): Move declaration to
before struct inferior's definition, and fix comment.
(inferior): Inherit from refcounted_object. Add comments.
* thread.c (switch_to_thread_no_regs): Reference the thread's
inferior pointer directly instead of doing a ptid lookup.
(switch_to_no_thread): New function.
(switch_to_thread(thread_info *)): New function, factored out
from ...
(switch_to_thread(ptid_t)): ... this.
(restore_current_thread): Delete.
(current_thread_cleanup): Remove 'inf_id' and 'was_removable'
fields, and add 'inf' field.
(do_restore_current_thread_cleanup): Check whether old->inf is
alive instead of looking up an inferior by ptid. Use
switch_to_thread and switch_to_no_thread.
(restore_current_thread_cleanup_dtor): Use old->inf directly
instead of lookup up an inferior by id. Decref the inferior.
Don't restore 'removable'.
(make_cleanup_restore_current_thread): Same the inferior pointer
in old, instead of the inferior number. Incref the inferior.
Don't save/clear 'removable'.
gdb/testsuite/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* gdb.threads/threadapply.exp (kill_and_remove_inferior): New
procedure.
(top level): Call it.
* lib/gdb.exp (gdb_define_cmd): New procedure.
|
|
I left making inferior::detaching a bool to a separate patch, because
doing that makes a make_cleanup_restore_integer call in
infrun.c:prepare_for_detach no longer compile (passing a 'bool *' when
an 'int *' is expected). Since we want to get rid of cleanups anyway,
I looked at converting that to a scoped_restore. However,
prepare_for_detach wants to discard the cleanup on success, and
scoped_restore doesn't have an equivalent for that. So I added one --
I called it "release()" because it seems like a natural fit in the way
standard components call similarly-spirited methods, and, it's also
what the proposal for a generic scope guard calls it too, AFAICS:
http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2014/n4189.pdf
I've added some scoped_guard unit tests, while at it.
gdb/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/scoped_restore-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add scoped_restore-selftests.o.
* common/scoped_restore.h (scoped_restore_base): Make "class".
(scoped_restore_base::release): New public method.
(scoped_restore_base::scoped_restore_base): New protected ctor.
(scoped_restore_base::m_saved_var): New protected field.
(scoped_restore_tmpl::scoped_restore_tmpl(T*)): Initialize the
scoped_restore_base base class instead of m_saved_var directly.
(scoped_restore_tmpl::scoped_restore_tmpl(T*, T2)): Likewise.
(scoped_restore_tmpl::scoped_restore_tmpl(const
scoped_restore_tmpl<T>&)): Likewise.
(scoped_restore_tmpl::~scoped_restore_tmpl): Use the saved_var
method.
(scoped_restore_tmpl::saved_var): New method.
(scoped_restore_tmpl::m_saved_var): Delete.
* inferior.h (inferior::detaching): Now a bool.
* infrun.c (prepare_for_detach): Use a scoped_restore instead of a
cleanup.
* unittests/scoped_restore-selftests.c: New file.
|
|
Currently we can't use gdb::optional<T> as function return type,
because gdb::optional's copy ctor is deleted. For example, with:
gdb::optional<int> function ()
{
gdb::optional<int> opt;
....
return opt;
we get:
src/gdb/foo.c: In function ‘gdb::optional<int> foo()’:
src/gdb/foo.c:75:10: error: use of deleted function ‘gdb::optional<T>::optional(const gdb::optional<T>&) [with T = int]’
return opt;
^
In file included from src/gdb/foo.c:68:0:
src/gdb/common/gdb_optional.h:53:3: note: declared here
optional (const optional &other) = delete;
^
I started by fixing that, and then ran into another missing feature,
also fixed by this patch.
The next feature I'm missing most from gdb::optional<T> compared to
std::optional<T> is construction/move/assignment from a T, instead of
having to default construct an gdb::optional and then use
optional::emplace(....).
For example:
gdb::optional<std::string> function ()
{
gdb::optional<std::string> opt;
std::string str;
...
opt.emplace (std::move (str));
return opt;
vs
gdb::optional<std::string> function ()
{
std::string str;
...
return str;
The copy/move ctor/assign methods weren't initialy implemented because
std::optional supports construction from a type U if U is convertible
to T too, and has rules to decide whether the ctors are
explicit/implicit based on that, and rules for whether the ctor should
be trivial or not, etc., which leads to a much more complicated
implementation.
If we stick to supporting copy/move construction/assignment of/to an
optional<T> from exactly only optional<T> and T, then all that
conversion-related complication disappears, and we still gain
convenience in most use cases.
The patch also makes emplace return a reference to the constructor
object, per C++17 std::optional, and adds a reset method, againt
because std::optional has one and it's trivial to support it. These
two changes are a requirement of the gdb::optional unit testing patch
that will follow.
gdb/ChangeLog:
2017-04-18 Pedro Alves <palves@redhat.com>
* common/gdb_optional.h: Include common/traits.h.
(in_place_t): New type.
(in_place): New constexpr variable.
(optional::optional): Remove member initialization of
m_instantiated.
(optional::optional(in_place_t...)): New constructor.
(optional::~optional): Use reset.
(optional::optional(const optional&)): New.
(optional::optional(const optional&&)): New.
(optional::optional(T &)): New.
(optional::optional(T &&)): New.
(operator::operator=(const optional &)): New.
(operator::operator=(optional &&)): New.
(operator::operator= (const T &))
(operator::operator= (T &&))
(operator::emplace (Args &&... args)): Return a T&. Use reset.
(operator::reset): New.
(operator::m_instantiated):: Add in-class initializer.
* common/traits.h: Include <type_traits>.
(struct And): New types.
|
|
As requested, I'm sending this as a separate patch because it is ready
to be included as-is.
The idea here is that both gdb/terminal.h and gdb/gdbserver/terminal.h
share the same code, which is responsible for setting a bunch of
defines on based on the presence of termios.h and a few other headers.
This simple patch just moves this common code to common/gdb_termios.h
and makes the necessary adjustments on both GDB and gdbserver so that
they can use this new header. It also implements the some header
checks on common/common.m4.
As a bonus, gdb/gdbserver/terminal.h can be removed because it's now
empty.
Built on x86_64, no regressions found.
gdb/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/gdb_termios.h".
* common/common.m4: Check headers 'termios.h', 'termio.h' and
'sgtty.h'.
* common/gdb_termios.h: New file, with parts of "terminal.h".
* inflow.c: Include "gdb_termios.h".
* ser-unix.c: Include "gdb_termios.h".
* terminal.h: Move terminal-related defines to
"common/gdb_termios.h".
gdb/gdbserver/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* remote-utils.c: Include "gdb_termios.h" instead of
"terminal.h".
* terminal.h: Delete file.
|
|
As a preparation for the next patch, which will move fork_inferior
from GDB to common/ (and therefore share it with gdbserver), it is
interesting to convert a few functions to C++.
This patch touches functions related to parsing command-line arguments
to the inferior (see gdb/fork-child.c:breakup_args), the way the
arguments are stored on fork_inferior (using std::vector instead of
char **), and the code responsible for dealing with argv also on
gdbserver.
I've taken this opportunity and decided to constify a few arguments to
fork_inferior/create_inferior as well, in order to make the code
cleaner. And now, on gdbserver, we're using xstrdup everywhere and
aren't checking for memory allocation failures anymore, as requested
by Pedro:
<https://sourceware.org/ml/gdb-patches/2017-03/msg00191.html>
Message-Id: <025ebdb9-90d9-d54a-c055-57ed2406b812@redhat.com>
Pedro Alves wrote:
> On the "== NULL" check: IIUC, the old NULL check was there to
> handle strdup returning NULL due to out-of-memory.
> See NULL checks and comments further above in this function.
> Now that you're using a std::vector, that doesn't work or make
> sense any longer, since if push_back fails to allocate space for
> its internal buffer (with operator new), our operator new replacement
> (common/new-op.c) calls malloc_failure, which aborts gdbserver.
>
> Not sure it makes sense to handle out-of-memory specially in
> the gdb/rsp-facing functions nowadays (maybe git blame/log/patch
> submission for that code shows some guidelines). Maybe (or, probably)
> it's OK to stop caring about it, but then we should consistently remove
> left over code, by using xstrdup instead and remove the NULL checks.
IMO this refactoring was very good to increase the readability of the
code as well, because some parts of the argument handling were
unnecessarily confusing before.
gdb/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* common/common-utils.c (free_vector_argv): New function.
* common/common-utils.h: Include <vector>.
(free_vector_argv): New prototype.
* darwin-nat.c (darwin_create_inferior): Rewrite function
prototype in order to constify "exec_file" and accept a
"std::string" for "allargs".
* fork-child.c: Include <vector>.
(breakup_args): Rewrite function, using C++.
(fork_inferior): Rewrite function header, constify "exec_file_arg"
and accept "std::string" for "allargs". Update the code to
calculate "argv" based on "allargs". Update calls to "exec_fun"
and "execvp".
* gnu-nat.c (gnu_create_inferior): Rewrite function prototype in
order to constify "exec_file" and accept a "std::string" for
"allargs".
* go32-nat.c (go32_create_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_create_inferior): Likewise.
* infcmd.c (run_command_1): Constify "exec_file". Use
"std::string" for inferior arguments.
* inferior.h (fork_inferior): Update prototype.
* linux-nat.c (linux_nat_create_inferior): Rewrite function
prototype in order to constify "exec_file" and accept a
"std::string" for "allargs".
* nto-procfs.c (procfs_create_inferior): Likewise.
* procfs.c (procfs_create_inferior): Likewise.
* remote-sim.c (gdbsim_create_inferior): Likewise.
* remote.c (extended_remote_run): Update code to accept
"std::string" as argument.
(extended_remote_create_inferior): Rewrite function prototype in
order to constify "exec_file" and accept a "std::string" for
"allargs".
* rs6000-nat.c (super_create_inferior): Likewise.
(rs6000_create_inferior): Likewise.
* target.h (struct target_ops) <to_create_inferior>: Likewise.
* windows-nat.c (windows_create_inferior): Likewise.
gdb/gdbserver/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c: Include <vector>.
<program_argv, wrapper_argv>: Convert to std::vector.
(start_inferior): Rewrite function to use C++.
(handle_v_run): Likewise. Update code that calculates the argv
based on the vRun packet; use C++.
(captured_main): Likewise.
|
|
I grew a bit tired of using ptid_get_{lwp,pid,tid} and friends, so I decided to
make it a bit easier to use by making it a proper class. The fields are now
private, so it's not possible to change a ptid_t field by mistake.
The new methods of ptid_t map to existing functions/practice like this:
ptid_t (pid, lwp, tid) -> ptid_build (pid, lwp, tid)
ptid_t (pid) -> pid_to_ptid (pid)
ptid.is_pid () -> ptid_is_pid (ptid)
ptid == other -> ptid_equal (ptid, other)
ptid != other -> !ptid_equal (ptid, other)
ptid.pid () -> ptid_get_pid (ptid)
ptid.lwp_p () -> ptid_lwp_p (ptid)
ptid.lwp () -> ptid_get_lwp (ptid)
ptid.tid_p () -> ptid_tid_p (ptid)
ptid.tid () -> ptid_get_tid (ptid)
ptid.matches (filter) -> ptid_match (ptid, filter)
I've replaced the implementation of the existing functions with calls to
the new methods. People are encouraged to gradually switch to using the
ptid_t methods instead of the functions (or we can change them all in
one pass eventually).
Also, I'm not sure if it's worth it (because of ptid_t's relatively
small size), but I have made the functions and methods take ptid_t
arguments by const reference instead of by value.
gdb/ChangeLog:
* common/ptid.h (struct ptid): Change to...
(class ptid_t): ... this.
<ptid_t>: New constructors.
<pid, lwp_p, lwp, tid_p, tid, is_pid, operator==, operator!=,
matches>: New methods.
<make_null, make_minus_one>: New static methods.
<pid>: Rename to...
<m_pid>: ...this.
<lwp>: Rename to...
<m_lwp>: ...this.
<tid>: Rename to...
<m_tid>: ...this.
(ptid_build, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal,
ptid_is_pid, ptid_lwp_p, ptid_tid_p, ptid_match): Take ptid arguments
as references, move comment to class ptid_t.
* common/ptid.c (null_ptid, minus_one_ptid): Initialize with
ptid_t static methods.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_tid,
ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p, ptid_match):
Take ptid arguments as references, implement using ptid_t methods.
* unittests/ptid-selftests.c: New file.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/ptid-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add unittests/ptid-selftests.o.
gdb/gdbserver/ChangeLog:
* server.c (handle_v_cont): Initialize thread_resume::thread
with null_ptid.
|
|
The calls to ptid_equal in ptid_lwp_p and ptid_tid_p that compare the
argument to minus_one_ptid and null_ptid are not necessary. The calls
in question are:
if (ptid_equal (minus_one_ptid, ptid)
|| ptid_equal (null_ptid, ptid))
return 0;
minus_one_ptid is { .pid = -1, .lwp = 0, .tid = 0 }
null_ptid is { .pid = 0, .lwp = 0, .tid = 0 }
If the ptid argument is either of them, the statements
return (ptid_get_lwp (ptid) != 0);
and
return (ptid_get_tid (ptid) != 0);
will yield the same result (0/false).
gdb/ChangeLog:
* common/ptid.c (ptid_lwp_p, ptid_tid_p): Remove comparison with
minus_one_ptid and null_ptid.
|
