Age | Commit message (Collapse) | Author | Files | Lines |
|
This is sort of a continuation of Keith's parse_exp_1 constification
patch. It started out by undoing these bits:
@@ -754,9 +754,12 @@ validate_actionline (char **line, struct
tmp_p = p;
for (loc = t->base.loc; loc; loc = loc->next)
{
- p = tmp_p;
- exp = parse_exp_1 (&p, loc->address,
+ const char *q;
+
+ q = tmp_p;
+ exp = parse_exp_1 (&q, loc->address,
block_for_pc (loc->address), 1);
+ p = (char *) q;
and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).
That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.
I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.
I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.
The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-03-13 Pedro Alves <palves@redhat.com>
* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const. Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust. No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg". New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char. Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c". Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char. Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this. Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg". New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const. Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const. Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const. Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust. Don't frob the action string while splitting
it at commas. Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.
|
|
* cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
parameter VAR's type from "unsigned int" to "int".
* command.h (var_zuinteger_unlimited): Update its comments.
(add_setshow_zuinteger_unlimited_cmd): Update the declaration.
|
|
set command.
* command.h (add_setshow_string_noescape_cmd): Update.
* corefile.c (set_gnutarget_command): Remove trailing whitespace.
(complete_set_gnutarget): New function.
(_initialize_core): Set the "set gnutarget" completer.
gdb/testsuite
* gdb.base/completion.exp: Add "set gnutarget" test.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
There are a bunch of aliases that get used with help, but the current
command completion logic does not include those when doing completions.
Since the framework is already mostly in place, extend complete_on_cmdlist
slightly to pass down the ignore_help_classes flag like is done with the
existing lookup command logic.
Now you can do:
(gdb) help use<tab>
and get back:
(gdb) help user-defined
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
* cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): New.
Update comment to add_setshow_integer_cmd.
* cli/cli-setshow.c (do_set_command): Handle case
'var_zuinteger_unlimited'.
(do_show_command): Likewise.
* cli/cli-cmds.c (init_cmds): Call add_setshow_zuinteger_unlimited_cmd
for command 'remotetimeout'.
* command.h (enum var_types): New zuinteger_unlimited. Update comment
to var_integer.
* source.c (_initialize_source): Call add_setshow_zuinteger_unlimited_cmd
for command 'set listsize'.
gdb/doc/
* gdb.texinfo (List): Describe the meaning of 0 and -1 in
'set listsize'.
gdb/testsuite/
* gdb.base/list.exp (set_listsize): Don't set arg to "unlimited"
when it is less than 0.
|
|
* command.h, remote.c: Fix a typo in comment.
|
|
* breakpoint.c (catch_syscall_completer): Return a VEC.
* cli/cli-cmds.c (complete_command): Update.
* cli/cli-decode.c (complete_on_cmdlist): Return a VEC.
(complete_on_enum): Likewise.
* command.h: Include gdb_vecs.h.
(completer_ftype): Change return type.
(complete_on_cmdlist, complete_on_enum): Likewise.
* completer.c (noop_completer, filename_completer)
(location_completer): Return a VEC.
(add_struct_fields): Remove 'nextp' argument. Change 'output'
to a VEC.
(expression_completer, complete_line_internal, complete_line)
(command_completer): Return a VEC.
(gdb_completion_word_break_characters, line_completion_function):
Update.
* completer.h: Include gdb_vecs.h.
(complete_line, noop_completer, filename_completer)
(expression_completer, location_completer, command_completer):
Update.
* f-lang.c (f_word_break_characters): Return a VEC.
* interps.c (interpreter_completer): Return a VEC.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Return a VEC.
* python/py-cmd.c (cmdpy_completer): Return a VEC.
* symtab.c (free_completion_list): Take a VEC.
(return_val_size, return_val_index): Remove.
(return_val): Now a VEC.
(completion_list_add_name): Update.
(default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_list_fn, make_file_symbol_completion_list):
Return a VEC.
(add_filename_to_list): Update.
(struct add_partial_filename_data) <list_used, list_alloced>: Remove.
<list>: Now a VEC.
(maybe_add_partial_symtab_filename): Update.
(make_source_files_completion_list): Return a VEC.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_list_fn, make_file_symbol_completion_list)
(make_source_files_completion_list): Update.
|
|
* breakpoint.h: Include command.h.
(add_catch_command): Use completer_ftype.
* cli/cli-decode.c (set_cmd_completer): Use completer_ftype.
* cli/cli-decode.h (struct cmd_list_element) <completer>:
Use completer_ftype.
* command.h (completer_ftype): New typedef.
(set_cmd_completer): Use it.
* python/py-cmd.c (struct cmdpy_completer) <completer>: Use
completer_ftype.
|
|
Code cleanup: Make 1440 bytes of data segment read-only.
* arch-utils.c (endian_enum): Make it const char *const [].
* arm-tdep.c (fp_model_strings, arm_abi_strings, arm_mode_strings):
Likewise.
* breakpoint.c (always_inserted_enums): Likewise.
* cli/cli-cmds.c (script_ext_enums): Likewise.
* cli/cli-decode.c (add_setshow_enum_cmd, complete_on_enum): Make the
enumlist parameter const char *const *.
* cli/cli-decode.h (struct cmd_list_element): Make the enums field
const char *const *.
* command.h (complete_on_enum, add_setshow_enum_cmd): Make the enumlist
parameter const char *const *.
* cris-tdep.c (cris_modes): Make it const char *const [].
* filesystem.c (target_file_system_kinds): Likewise.
* i386-tdep.c (valid_flavors, valid_conventions): Likewise.
* infrun.c (follow_fork_mode_kind_names, follow_exec_mode_names)
(can_use_displaced_stepping_enum, scheduler_enums)
(exec_direction_names): Likewise.
* language.c (_initialize_language): Make the type_or_range_names and
case_sensitive_names variables const char *const [].
* mips-tdep.c (mips_abi_strings): Make it const char *const [].
* python/python.c (python_excp_enums): Likewise.
* remote.c (interrupt_sequence_modes): Likewise.
* rs6000-tdep.c (powerpc_vector_strings): Likewise.
* serial.c (logbase_enums): Likewise.
* sh-tdep.c (sh_cc_enum): Likewise.
* stack.c (print_frame_arguments_choices, print_entry_values_choices):
Likewise.
* symtab.c (multiple_symbols_modes): Likewise.
* tui/tui-win.c (tui_border_kind_enums, tui_border_mode_enums):
Likewise.
* utils.c (internal_problem_modes): Likewise.
|
|
* cli/cli-decode.h: Add comments.
(CMD_LIST_AMBIGUOUS): Moved to command.h
(add_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd)
(set_cmd_cfunc, set_cmd_sfunc, set_cmd_completer, cmd_cfunc_eq)
(set_cmd_context, get_cmd_context, lookup_cmd, lookup_cmd_1)
(deprecate_cmd, deprecated_cmd_warning, lookup_cmd_composition)
(add_com, add_com_alias, add_info, add_info_alias)
(complete_on_cmdlist, complete_on_enum, help_list): Remove
declarations.
* command.h: Add and adjust comments.
(CMD_LIST_AMBIGUOUS): Moved here.
(help_cmd, help_cmd_list): Delete declarations.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
* NEWS: Mention new command.
* command.h (valid_user_defined_cmd_name_p): Declare.
* defs.h (make_cleanup_dyn_string_delete): Declare.
* utils.c: #include "dyn-string.h".
(do_dyn_string_delete, make_cleanup_dyn_string_delete): New functions.
* cli/cli-cmds.c: #include "dyn-string.h".
(argv_to_dyn_string, valid_command_p, alias_command): New functions.
(init_cli_cmds): Add new command.
* cli/cli-decode.c (valid_user_defined_cmd_name_p): New function.
doc/
* gdb.texinfo (Extending GDB): Document alias command.
testsuite/
* gdb.base/alias.exp: Add tests for alias command.
|
|
* command.h (enum command_class): New class 'no_set_class', for
"show" commands without a corresponding "set" command.
* value.c (_initialize_values): Use 'no_set_class' for "show values".
* copying.c (_initialize_copying): Ditto for "show copying" and
"show warranty".
* cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
"show version".
* cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
which there is no corresponding "set" command (eg. "show copying").
|
|
* python/python.c (execute_gdb_command): Call
prevent_dont_repeat.
* top.c (suppress_dont_repeat): New global.
(dont_repeat): Use it.
(prevent_dont_repeat): New function.
* command.h (prevent_dont_repeat): Declare.
|
|
* addrmap.c: Shorten lines of >= 80 columns.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* ax-gdb.c: Ditto.
* ax-general.c: Ditto.
* bcache.c: Ditto.
* blockframe.c: Ditto.
* breakpoint.c: Ditto.
* buildsym.c: Ditto.
* c-lang.c: Ditto.
* c-typeprint.c: Ditto.
* charset.c: Ditto.
* coffread.c: Ditto.
* command.h: Ditto.
* corelow.c: Ditto.
* cp-abi.c: Ditto.
* cp-namespace.c: Ditto.
* cp-support.c: Ditto.
* dbug-rom.c: Ditto.
* dbxread.c: Ditto.
* defs.h: Ditto.
* dfp.c: Ditto.
* dfp.h: Ditto.
* dictionary.c: Ditto.
* disasm.c: Ditto.
* doublest.c: Ditto.
* dwarf2-frame.c: Ditto.
* dwarf2expr.c: Ditto.
* dwarf2loc.c: Ditto.
* dwarf2read.c: Ditto.
* elfread.c: Ditto.
* eval.c: Ditto.
* event-loop.c: Ditto.
* event-loop.h: Ditto.
* exceptions.h: Ditto.
* exec.c: Ditto.
* expprint.c: Ditto.
* expression.h: Ditto.
* f-lang.c: Ditto.
* f-valprint.c: Ditto.
* findcmd.c: Ditto.
* frame-base.c: Ditto.
* frame-unwind.c: Ditto.
* frame-unwind.h: Ditto.
* frame.c: Ditto.
* frame.h: Ditto.
* gcore.c: Ditto.
* gdb-stabs.h: Ditto.
* gdb_assert.h: Ditto.
* gdb_dirent.h: Ditto.
* gdb_obstack.h: Ditto.
* gdbcore.h: Ditto.
* gdbtypes.c: Ditto.
* gdbtypes.h: Ditto.
* inf-ttrace.c: Ditto.
* infcall.c: Ditto.
* infcmd.c: Ditto.
* inflow.c: Ditto.
* infrun.c: Ditto.
* inline-frame.h: Ditto.
* language.c: Ditto.
* language.h: Ditto.
* libunwind-frame.c: Ditto.
* libunwind-frame.h: Ditto.
* linespec.c: Ditto.
* linux-nat.c: Ditto.
* linux-nat.h: Ditto.
* linux-thread-db.c: Ditto.
* machoread.c: Ditto.
* macroexp.c: Ditto.
* macrotab.c: Ditto.
* main.c: Ditto.
* maint.c: Ditto.
* mdebugread.c: Ditto.
* memattr.c: Ditto.
* minsyms.c: Ditto.
* monitor.c: Ditto.
* monitor.h: Ditto.
* objfiles.c: Ditto.
* objfiles.h: Ditto.
* osabi.c: Ditto.
* p-typeprint.c: Ditto.
* p-valprint.c: Ditto.
* parse.c: Ditto.
* printcmd.c: Ditto.
* proc-events.c: Ditto.
* procfs.c: Ditto.
* progspace.c: Ditto.
* progspace.h: Ditto.
* psympriv.h: Ditto.
* psymtab.c: Ditto.
* record.c: Ditto.
* regcache.c: Ditto.
* regcache.h: Ditto.
* remote-fileio.c: Ditto.
* remote.c: Ditto.
* ser-mingw.c: Ditto.
* ser-tcp.c: Ditto.
* ser-unix.c: Ditto.
* serial.c: Ditto.
* serial.h: Ditto.
* solib-frv.c: Ditto.
* solib-irix.c: Ditto.
* solib-osf.c: Ditto.
* solib-pa64.c: Ditto.
* solib-som.c: Ditto.
* solib-sunos.c: Ditto.
* solib-svr4.c: Ditto.
* solib-target.c: Ditto.
* solib.c: Ditto.
* somread.c: Ditto.
* source.c: Ditto.
* stabsread.c: Ditto.
* stabsread.c: Ditto.
* stack.c: Ditto.
* stack.h: Ditto.
* symfile-mem.c: Ditto.
* symfile.c: Ditto.
* symfile.h: Ditto.
* symmisc.c: Ditto.
* symtab.c: Ditto.
* symtab.h: Ditto.
* target-descriptions.c: Ditto.
* target-memory.c: Ditto.
* target.c: Ditto.
* target.h: Ditto.
* terminal.h: Ditto.
* thread.c: Ditto.
* top.c: Ditto.
* tracepoint.c: Ditto.
* tracepoint.h: Ditto.
* ui-file.c: Ditto.
* ui-file.h: Ditto.
* ui-out.h: Ditto.
* user-regs.c: Ditto.
* user-regs.h: Ditto.
* utils.c: Ditto.
* valarith.c: Ditto.
* valops.c: Ditto.
* valprint.c: Ditto.
* valprint.h: Ditto.
* value.c: Ditto.
* varobj.c: Ditto.
* varobj.h: Ditto.
* vec.h: Ditto.
* xcoffread.c: Ditto.
* xcoffsolib.c: Ditto.
* xcoffsolib.h: Ditto.
* xml-syscall.c: Ditto.
* xml-tdesc.c: Ditto.
|
|
|
|
* charset.c: Comment cleanup and long line wrapping.
* charset.h: Ditto.
* c-lang.c: Ditto.
* c-lang.h: Ditto.
* coff-pe-read.c: Ditto.
* coff-pe-read.h: Ditto.
* coffread.c: Ditto.
* command.h: Ditto.
* complaints.c: Ditto.
* complaints.h: Ditto.
* completer.c: Ditto.
* completer.h: Ditto.
* corefile.c: Ditto.
* corelow.c: Ditto.
* core-regset.c: Ditto.
* cp-abi.c: Ditto.
* cp-abi.h: Ditto.
* cp-namespace.c: Ditto.
* cp-support.c: Ditto.
* cp-support.h: Ditto.
* cp-valprint.c: Ditto.
* cp-typeprint.c: Ditto.
* c-valprint.c: Ditto.
|
|
* command.h: Comment clean-up.
* cli/cli-cmds.c: Ditto.
* cli/cli-cmds.h: Ditto.
* cli/cli-decode.c: Ditto.
* cli/cli-decode.h: Ditto.
* cli/cli-dump.c: Ditto.
* cli/cli-interp.c: Ditto.
* cli/cli-logging.c: Ditto.
* cli/cli-script.c: Ditto.
* cli/cli-setshow.c: Ditto.
* cli/cli-setshow.h: Ditto.
|
|
* cli/cli-cmds.h (error_no_arg): Remove. Move the comment ...
* command.h (error_no_arg): ... here. Remove NORETURN, change
ATTR_NORETURN to ATTRIBUTE_NORETURN.
* defs.h (NORETURN, ATTR_NORETURN): Remove.
(perror_with_name, verror, error, error_stream, vfatal, fatal)
(internal_verror, internal_error, nomem): Remove NORETURN, change
ATTR_NORETURN to ATTRIBUTE_NORETURN.
* exceptions.c (throw_exception, deprecated_throw_reason, throw_verror)
(throw_vfatal, throw_error): Remove NORETURN.
(throw_it): Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN.
* exceptions.h (throw_exception, throw_verror, throw_vfatal)
(throw_error, deprecated_throw_reason): Remove NORETURN, change
ATTR_NORETURN to ATTRIBUTE_NORETURN.
* linespec.c (cplusplus_error): Remove NORETURN, change ATTR_NORETURN
to ATTRIBUTE_NORETURN for prototype, for the definition only remove
NORETURN.
* remote-mips.c (mips_error): Change NORETURN to ATTRIBUTE_NORETURN.
* remote-sim.c (gdb_os_error): Change ATTR_NORETURN to
ATTRIBUTE_NORETURN.
* target.c (tcomplain): Likewise.
* target.h (noprocess): Remove NORETURN, change ATTR_NORETURN to
ATTRIBUTE_NORETURN.
* utils.c (verror, error, vfatal, fatal, error_stream, internal_verror)
(internal_error, perror_with_name, nomem): Remove NORETURN.
* xml-support.h (gdb_xml_error): Change ATTR_NORETURN to
ATTRIBUTE_NORETURN.
gdb/doc/
* gdbint.texinfo (Host Definition): Remove items NORETURN and
ATTR_NORETURN.
|
|
Automatic update by copyright.sh.
|
|
* target.h (struct target_ops): New methods to_get_bookmark
and to_goto_bookmark.
(target_get_bookmark): New macro.
(target_goto_bookmark): New macro.
* target.c (dummy_get_bookmark): New function, default implementation.
(dummy_goto_bookmark): New function, default implementation.
(update_current_target): Inherit new methods.
* record.c (record_get_bookmark): New function.
(record_goto_bookmark): New function.
(init_record_ops): Set to_get_bookmark and to_goto_bookmark methods.
* reverse.c (struct bookmark): New type.
(save_bookmark_command): New function (command).
(delete_bookmark_command): New function (command).
(goto_bookmark_command): New function (command).
(bookmarks_info): New function (command).
(_initialize_reverse): Add new bookmark commands.
* command.h (enum command_class): Add class_bookmark.
* NEWS: Mention bookmark commands.
|
|
* language.c (set_language_command): Strip whitespace.
(set_type_command): Likewise.
(set_range_command): Likewise.
* language.c (language_completer): New function.
(range_or_type_completer): New function.
(case_completer): New function.
(_initialize_language): Set completers.
* cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
command.
(add_setshow_string_noescape_cmd): Likewise.
(add_setshow_integer_cmd): Likewise.
(add_setshow_uinteger_cmd): Likewise.
(add_setshow_zinteger_cmd): Likewise.
(add_setshow_zuinteger_cmd): Likewise.
* command.h (add_setshow_string_cmd,
add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
|
|
* language.c (language_completer): New function.
(range_or_type_completer): New function.
(case_completer): New function.
(_initialize_language): Set completers.
* cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
command.
(add_setshow_string_noescape_cmd): Likewise.
(add_setshow_integer_cmd): Likewise.
(add_setshow_uinteger_cmd): Likewise.
(add_setshow_zinteger_cmd): Likewise.
(add_setshow_zuinteger_cmd): Likewise.
* command.h (add_setshow_string_cmd,
add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
|
|
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* cli/cli-decode.c (deprecated_add_set_cmd): Delete.
* command.h (deprecated_add_set_cmd): Delete declaration.
* gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
'set debug gnu-nat' and 'show debug gnu-nat'.
* i386-nat.c (_initialize_i386_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
* mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
gdb/doc/
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo: Document 'set/show debug gnu-nat'. Replace 'maint
show-debug-regs' docs by 'maint set show-debug-regs' and 'maint
show show-debug-regs' docs.
|
|
2009-02-06 Tom Tromey <tromey@redhat.com>
* Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
(SUBDIR_PYTHON_SRCS): Add python-cmd.c.
(python-cmd.o): New target.
* cli/cli-decode.c (set_cmd_completer): Add self parameter to
completer prototype.
(add_cmd): Initialize destroyer member of cmd_list_element. Use
make_symbol_completion_list_fn as completer.
(delete_cmd): Call destroyer if one is set.
* cli/cli-decode.h (cmd_list_element): Add cmd parameter to
completer member. Add destroyer member.
(set_cmd_completer): Add self parameter to
completer prototype.
* command.h (set_cmd_completer): Add cmd parameter to
completer prototype.
* completer.c (noop_completer, filename_completer,
location_completer, expression_completer, command_completer): Adapt
to new completer prototype.
(complete_line_internal): Pass new parameter to completer function.
* completer.h (noop_completer, filename_completer,
location_completer, expression_completer, command_completer): Adapt
prototypes to new completer prototype.
* interps.c (interpreter_completer): Adapt to new completer
prototype.
* python/python-cmd.c: New file.
* python/python-internal.h (gdbpy_initialize_commands): Add
prototype.
(gdbpy_doc_cst): Add forward declaration.
* python/python.c (gdbpy_doc_cst): Declare.
(_initialize_python): Call gdbpy_initialize_commands. Initialize
gdbpy_doc_cst.
* symtab.c (make_symbol_completion_list_fn): New function.
* symtab.h (make_symbol_completion_list_fn): Add prototype.
gdb/doc/
2009-02-06 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Python API): Add entry for Commands In Python.
(Commands In Python): New node.
gdb/testsuite/
2009-02-06 Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.python/python-cmd.exp: New file.
|
|
* cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
* cli/cli-setshow.c (do_setshow_command): Handle it.
* command.h (enum var_types): Add var_zuinteger.
(add_setshow_zuinteger_cmd): Declare.
* valprint.c (_initialize_valprint): Change the set input-radix
and set output-radix commands to zuinteger type.
2009-01-23 Pedro Alves <pedro@codesourcery.com>
* gdb.base/radix.exp: Add tests to ensure that that set
input-radix 0 and set output-radix 0 are really rejected.
|
|
|
|
PR gdb/1815:
* cli/cli-decode.c (delete_cmd): Forward declare.
(delete_cmd): Now static. Change return type. Remove command
from alias chain. Rewrite.
(add_cmd): Initialize new fields. Update cmd_pointer on all
aliases.
(add_alias_cmd): Put command on alias chain.
* command.h (delete_cmd): Don't declare.
* cli/cli-decode.h (delete_cmd): Don't declare.
(struct cmd_list_element) <aliases, alias_chain>: New fields.
gdb/testsuite
* gdb.base/commands.exp (redefine_backtrace_test): New proc.
Call it.
|
|
|
|
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
|
|
|
|
|
|
* arm-tdep.c:
* ia64-tdep.c:
* i386-tdep.c:
* hpread.c:
* hppa-tdep.c:
* hppa-hpux-tdep.c:
* gnu-nat.c:
* gdbtypes.c:
* gdbarch.h:
* gdbarch.c:
* eval.c:
* dwarf2read.c:
* dbxread.c:
* copying:
* symfile.c:
* stabsread.c:
* sh64-tdep.c:
* sh-tdep.c:
* s390-tdep.c:
* rs6000-tdep.c:
* remote.c:
* remote-mips.c:
* mips-tdep.c:
* mdebugread.c:
* linux-nat.c:
* infrun.c:
* xcoffread.c:
* win32-nat.c:
* valops.c:
* utils.c:
* tracepoint.c:
* target.c:
* symtab.c:
* c-exp.y:
* ada-valprint.c:
* ada-typeprint.c:
* ada-lex.l:
* ada-lang.h:
* ada-lang.c:
* ada-exp.y:
* alphafbsd-tdep.c:
* alphabsd-tdep.h:
* alphabsd-tdep.c:
* alphabsd-nat.c:
* alpha-tdep.h:
* alpha-tdep.c:
* alpha-osf1-tdep.c:
* alpha-nat.c:
* alpha-mdebug-tdep.c:
* alpha-linux-tdep.c:
* alpha-linux-nat.c:
* aix-thread.c:
* abug-rom.c:
* arch-utils.c:
* annotate.h:
* annotate.c:
* amd64obsd-tdep.c:
* amd64obsd-nat.c:
* amd64nbsd-tdep.c:
* amd64nbsd-nat.c:
* amd64fbsd-tdep.c:
* amd64fbsd-nat.c:
* amd64bsd-nat.c:
* amd64-tdep.h:
* amd64-tdep.c:
* amd64-sol2-tdep.c:
* amd64-nat.h:
* amd64-nat.c:
* amd64-linux-tdep.c:
* amd64-linux-nat.c:
* alphanbsd-tdep.c:
* block.h:
* block.c:
* bfd-target.h:
* bfd-target.c:
* bcache.h:
* bcache.c:
* ax.h:
* ax-general.c:
* ax-gdb.h:
* ax-gdb.c:
* avr-tdep.c:
* auxv.h:
* auxv.c:
* armnbsd-tdep.c:
* armnbsd-nat.c:
* arm-tdep.h:
* arm-linux-nat.c:
* arch-utils.h:
* charset.c:
* call-cmds.h:
* c-valprint.c:
* c-typeprint.c:
* c-lang.h:
* c-lang.c:
* buildsym.h:
* buildsym.c:
* bsd-uthread.h:
* bsd-uthread.c:
* bsd-kvm.h:
* bsd-kvm.c:
* breakpoint.h:
* core-regset.c:
* core-aout.c:
* completer.h:
* completer.c:
* complaints.h:
* complaints.c:
* command.h:
* coffread.c:
* coff-solib.h:
* coff-solib.c:
* coff-pe-read.h:
* coff-pe-read.c:
* cli-out.h:
* cli-out.c:
* charset.h:
* dink32-rom.c:
* dictionary.h:
* dictionary.c:
* demangle.c:
* defs.h:
* dcache.h:
* dcache.c:
* d10v-tdep.c:
* cpu32bug-rom.c:
* cp-valprint.c:
* cp-support.h:
* cp-support.c:
* cp-namespace.c:
* cp-abi.h:
* cp-abi.c:
* corelow.c:
* corefile.c:
* environ.c:
* elfread.c:
* dwarfread.c:
* dwarf2loc.c:
* dwarf2expr.h:
* dwarf2expr.c:
* dwarf2-frame.h:
* dwarf2-frame.c:
* dve3900-rom.c:
* dummy-frame.h:
* dummy-frame.c:
* dsrec.c:
* doublest.h:
* doublest.c:
* disasm.h:
* disasm.c:
* fork-child.c:
* findvar.c:
* fbsd-nat.h:
* fbsd-nat.c:
* f-valprint.c:
* f-typeprint.c:
* f-lang.h:
* f-lang.c:
* expression.h:
* expprint.c:
* exec.h:
* exec.c:
* exceptions.h:
* exceptions.c:
* event-top.h:
* event-top.c:
* event-loop.h:
* event-loop.c:
* gdb.c:
* gdb-stabs.h:
* gdb-events.h:
* gdb-events.c:
* gcore.c:
* frv-tdep.h:
* frv-tdep.c:
* frv-linux-tdep.c:
* frame.h:
* frame.c:
* frame-unwind.h:
* frame-unwind.c:
* frame-base.h:
* frame-base.c:
* gdb_vfork.h:
* gdb_thread_db.h:
* gdb_string.h:
* gdb_stat.h:
* gdb_regex.h:
* gdb_ptrace.h:
* gdb_proc_service.h:
* gdb_obstack.h:
* gdb_locale.h:
* gdb_dirent.h:
* gdb_curses.h:
* gdb_assert.h:
* gdbarch.sh:
* gdb.h:
* hpux-thread.c:
* hppabsd-nat.c:
* hppa-tdep.h:
* hpacc-abi.c:
* h8300-tdep.c:
* gregset.h:
* go32-nat.c:
* gnu-v3-abi.c:
* gnu-v2-abi.h:
* gnu-v2-abi.c:
* gnu-nat.h:
* glibc-tdep.c:
* gdbtypes.h:
* gdbcore.h:
* gdbcmd.h:
* i386nbsd-tdep.c:
* i386nbsd-nat.c:
* i386gnu-tdep.c:
* i386gnu-nat.c:
* i386fbsd-tdep.c:
* i386fbsd-nat.c:
* i386bsd-tdep.c:
* i386bsd-nat.h:
* i386bsd-nat.c:
* i386-tdep.h:
* i386-sol2-nat.c:
* i386-nto-tdep.c:
* i386-nat.c:
* i386-linux-tdep.h:
* i386-linux-tdep.c:
* i386-linux-nat.c:
* i386-cygwin-tdep.c:
* inf-ttrace.c:
* inf-ptrace.h:
* inf-ptrace.c:
* inf-loop.h:
* inf-loop.c:
* inf-child.h:
* inf-child.c:
* ia64-tdep.h:
* ia64-linux-nat.c:
* i387-tdep.h:
* i387-tdep.c:
* i386v4-nat.c:
* i386v-nat.c:
* i386obsd-tdep.c:
* i386obsd-nat.c:
* kod.c:
* jv-valprint.c:
* jv-typeprint.c:
* jv-lang.h:
* jv-lang.c:
* irix5-nat.c:
* iq2000-tdep.c:
* interps.h:
* interps.c:
* inftarg.c:
* inflow.h:
* inflow.c:
* inferior.h:
* infcmd.c:
* infcall.h:
* infcall.c:
* inf-ttrace.h:
* m32r-tdep.h:
* m32r-tdep.c:
* m32r-rom.c:
* m32r-linux-tdep.c:
* m32r-linux-nat.c:
* m2-valprint.c:
* m2-typeprint.c:
* m2-lang.h:
* m2-lang.c:
* lynx-nat.c:
* linux-thread-db.c:
* linux-nat.h:
* linespec.c:
* libunwind-frame.h:
* libunwind-frame.c:
* language.h:
* language.c:
* macroexp.c:
* macrocmd.c:
* m88kbsd-nat.c:
* m88k-tdep.h:
* m88k-tdep.c:
* m68klinux-tdep.c:
* m68klinux-nat.c:
* m68kbsd-tdep.c:
* m68kbsd-nat.c:
* m68k-tdep.h:
* m68k-tdep.c:
* mips-linux-nat.c:
* mips-irix-tdep.c:
* minsyms.c:
* memattr.h:
* memattr.c:
* mem-break.c:
* mdebugread.h:
* main.h:
* main.c:
* macrotab.h:
* macrotab.c:
* macroscope.h:
* macroscope.c:
* macroexp.h:
* nbsd-tdep.c:
* mt-tdep.c:
* monitor.h:
* monitor.c:
* mn10300-tdep.h:
* mn10300-tdep.c:
* mn10300-linux-tdep.c:
* mipsv4-nat.c:
* mipsread.c:
* mipsnbsd-tdep.h:
* mipsnbsd-tdep.c:
* mipsnbsd-nat.c:
* mips64obsd-tdep.c:
* mips64obsd-nat.c:
* mips-tdep.h:
* mips-mdebug-tdep.c:
* mips-linux-tdep.c:
* osabi.h:
* osabi.c:
* ocd.h:
* ocd.c:
* observer.c:
* objfiles.h:
* objfiles.c:
* objc-lang.h:
* objc-lang.c:
* objc-exp.y:
* nto-tdep.h:
* nto-tdep.c:
* nto-procfs.c:
* nlmread.c:
* nbsd-tdep.h:
* ppcobsd-tdep.c:
* ppcobsd-nat.c:
* ppcnbsd-tdep.h:
* ppcnbsd-tdep.c:
* ppcnbsd-nat.c:
* ppcbug-rom.c:
* ppc-tdep.h:
* ppc-sysv-tdep.c:
* ppc-linux-tdep.c:
* ppc-linux-nat.c:
* ppc-bdm.c:
* parser-defs.h:
* parse.c:
* p-valprint.c:
* p-typeprint.c:
* p-lang.h:
* p-lang.c:
* remote-fileio.h:
* remote-fileio.c:
* remote-est.c:
* remote-e7000.c:
* regset.h:
* regset.c:
* reggroups.h:
* reggroups.c:
* regcache.h:
* regcache.c:
* proc-why.c:
* proc-service.c:
* proc-events.c:
* printcmd.c:
* ppcobsd-tdep.h:
* sentinel-frame.h:
* sentinel-frame.c:
* scm-valprint.c:
* scm-tags.h:
* scm-lang.h:
* scm-lang.c:
* scm-exp.c:
* s390-tdep.h:
* rom68k-rom.c:
* remote.h:
* remote-utils.c:
* remote-st.c:
* remote-sim.c:
* remote-sds.c:
* remote-rdp.c:
* remote-rdi.c:
* remote-hms.c:
* sim-regno.h:
* shnbsd-tdep.h:
* shnbsd-tdep.c:
* shnbsd-nat.c:
* sh-tdep.h:
* serial.h:
* serial.c:
* ser-unix.h:
* ser-unix.c:
* ser-tcp.c:
* ser-pipe.c:
* ser-go32.c:
* ser-e7kpc.c:
* ser-base.h:
* ser-base.c:
* solib.c:
* solib-svr4.h:
* solib-svr4.c:
* solib-sunos.c:
* solib-som.h:
* solib-som.c:
* solib-pa64.h:
* solib-pa64.c:
* solib-osf.c:
* solib-null.c:
* solib-legacy.c:
* solib-irix.c:
* solib-frv.c:
* solib-aix5.c:
* sol-thread.c:
* sparc64-linux-tdep.c:
* sparc64-linux-nat.c:
* sparc-tdep.h:
* sparc-tdep.c:
* sparc-sol2-tdep.c:
* sparc-sol2-nat.c:
* sparc-nat.h:
* sparc-nat.c:
* sparc-linux-tdep.c:
* sparc-linux-nat.c:
* source.h:
* source.c:
* somread.c:
* solist.h:
* solib.h:
* std-regs.c:
* stack.h:
* stack.c:
* stabsread.h:
* sparcobsd-tdep.c:
* sparcnbsd-tdep.c:
* sparcnbsd-nat.c:
* sparc64obsd-tdep.c:
* sparc64nbsd-tdep.c:
* sparc64nbsd-nat.c:
* sparc64fbsd-tdep.c:
* sparc64fbsd-nat.c:
* sparc64-tdep.h:
* sparc64-tdep.c:
* sparc64-sol2-tdep.c:
* sparc64-nat.c:
* ui-file.c:
* typeprint.h:
* typeprint.c:
* tramp-frame.h:
* tramp-frame.c:
* trad-frame.h:
* trad-frame.c:
* tracepoint.h:
* top.c:
* tobs.inc:
* thread.c:
* terminal.h:
* target.h:
* symfile.h:
* stop-gdb.c:
* vaxbsd-nat.c:
* vax-tdep.h:
* vax-tdep.c:
* vax-nat.c:
* varobj.h:
* varobj.c:
* value.h:
* value.c:
* valprint.h:
* valprint.c:
* v850-tdep.c:
* uw-thread.c:
* user-regs.c:
* ui-out.h:
* ui-out.c:
* ui-file.h:
* xcoffsolib.h:
* xcoffsolib.c:
* wrapper.c:
* wince.c:
* wince-stub.h:
* wince-stub.c:
* vaxobsd-tdep.c:
* vaxnbsd-tdep.c:
* gdb_gcore.sh:
* copying.c:
* configure.ac:
* aclocal.m4:
* acinclude.m4:
* reply_mig_hack.awk:
* observer.sh:
* gdb_mbuild.sh:
* arm-linux-tdep.c:
* blockframe.c:
* dbug-rom.c:
* environ.h:
* dwarf2loc.h:
* gdb-events.sh:
* glibc-tdep.h:
* gdb_wait.h:
* gdbthread.h:
* i386-sol2-tdep.c:
* hppabsd-tdep.c:
* hppa-linux-nat.c:
* hppa-hpux-nat.c:
* ia64-linux-tdep.c:
* infptrace.c:
* linespec.h:
* maint.c:
* mips-mdebug-tdep.h:
* remote-m32r-sdi.c:
* s390-nat.c:
* rs6000-nat.c:
* remote-utils.h:
* sh3-rom.c:
* sh-linux-tdep.c:
* top.h:
* symtab.h:
* symmisc.c:
* symfile-mem.c:
* srec.h:
* user-regs.h:
* version.h:
* valarith.c:
* xstormy16-tdep.c:
* wrapper.h:
* Makefile.in:
* f-exp.y:
* cris-tdep.c:
* cp-name-parser.y:
* procfs.c:
* proc-utils.h:
* proc-flags.c:
* proc-api.c:
* p-exp.y:
* m68hc11-tdep.c:
* m2-exp.y:
* kod.h:
* kod-cisco.c:
* jv-exp.y:
* hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF
address.
|
|
* command.h (add_setshow_integer_cmd): Make VAR an integer.
* cli/cli-decode.c (add_setshow_integer_cmd): Update to match.
* valops.c (value_string): Add a cast.
* eval.c (evaluate_subexp_standard): Use gdb_byte for byte buffers.
* breakpoint.c (re_enable_breakpoints_in_shlibs): Use gdb_byte for
byte buffers.
* target.h (struct target_ops): For to_insert_hw_breakpoint and
to_remove_hw_breakpoint use gdb_byte for byte buffer parameters.
* breakpoint.h (struct bp_location): Make shadow_contents a
gdb_byte buffer.
* cli/cli-setshow.c (do_setshow_command): Fix cast.
* cli/cli-dump.c (restore_section_callback)
(restore_binary_file): Use gdb_byte for byte buffers.
* proc-service.c (ps_ptwrite, ps_ptread, ps_pdwrite): Fix casts.
(ps_xfer_memory): Use gdb_byte for byte buffers.
* tracepoint.c (mem2hex): Use gdb_byte for byte buffers, and char
for string buffers.
* ser-tcp.c (net_open): Make len a socklen_t.
|
|
* command.h (deprecated_add_set_cmd): Rename add_set_cmd.
* cli/cli-decode.h (add_set_cmd): Delete declaration.
* cli/cli-decode.c (deprecated_add_set_cmd): Rename add_set_cmd.
* i386-nat.c (_initialize_i386_nat): Update call.
* valprint.c (_initialize_valprint): Update comment.
* gnu-nat.c (_initialize_gnu_nat): Update call.
|
|
* cli/cli-decode.c (add_set_enum_cmd): Delete function.
(deprecated_add_show_from_set): Delete function.
* command.h (add_set_enum_cmd): Delete declaration.
(deprecated_add_show_from_set): Delete declaration.
* cli/cli-decode.h (add_set_enum_cmd): Delete declaration.
(deprecated_add_show_from_set): Delete declaration.
* arm-tdep.c (_initialize_arm_tdep): Update comment.
* kod.c (kod_set_os): Simplify.
* infrun.c (set_schedlock_func): Simplify.
* cli/cli-dump.c (add_dump_command): Update comment.
|
|
* cli/cli-decode.c (add_setshow_optional_filename_cmd): New
function.
* cli/cli-setshow.c (deprecated_show_value_hack)
(do_setshow_command): Handle var_optional_filename.
* command.h (enum var_types): Add var_optional_filename.
(add_setshow_optional_filename_cmd): Declare.
* infcmd.c (notice_args_read): Use.
|
|
* cli/cli-decode.c (add_setshow_integer_cmd): New function.
* command.h (add_setshow_integer_cmd): Declare.
* cli/cli-cmds.c: Update.
|
|
* cli/cli-decode.c (add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete
fprint_setshow parameter.
* command.h (fprint_setshow_ftype): Delete.
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete
fprint_setshow parameter.
* aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update.
* complaints.c, cris-tdep.c, dwarf2read.c, frame.c: Update.
* hppa-tdep.c, infcall.c, m32r-rom.c, maint.c: Update.
* mips-tdep.c, nto-tdep.c, observer.c, remote-rdi.c: Update
* remote.c, target.c, cli/cli-logging.c: Update.
|
|
* cli/cli-decode.c (add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete
fprint_setshow parameter.
* command.h (fprint_setshow_ftype): Delete.
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete
fprint_setshow parameter.
* aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update.
* complaints.c, cris-tdep.c, dwarf2read.c, frame.c: Update.
* hppa-tdep.c, infcall.c, m32r-rom.c, maint.c: Update.
* mips-tdep.c, nto-tdep.c, observer.c, remote-rdi.c: Update
* remote.c, target.c, cli/cli-logging.c: Update.
|
|
Merge setshow print and show parameters.
* command.h (show_value_ftype): Define.
(deprecated_show_value_hack): Declare.
(add_setshow_enum_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_filename_cmd)
(add_setshow_string_cmd, add_setshow_uinteger_cmd)
(add_setshow_zinteger_cmd): Change type of show_func to
show_value_ftype.
* cli/cli-decode.h (struct cmd_list_element): Replace
fprint_setshow with show_value_func.
* cli/cli-decode.c (add_setshow_cmd_full): Update show_func
parameter. Set show_value_func. Do not set cmd_sfunc.
(add_setshow_enum_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_filename_cmd)
(add_setshow_string_cmd, add_setshow_uinteger_cmd)
(add_setshow_zinteger_cmd): Update.
* complaints.c (complaints_show_value): Replace
fprint_setshow_complaints.
(_initialize_complaints): Update.
* mips-tdep.c (show_mask_address): Update.
* arm-tdep.c (show_fp_model): Update.
* cli/cli-setshow.c (do_setshow_command): Call show_value_func
instead of fprint_setshow. Use deprecated_show_value_hack.
(deprecated_show_value_hack): New function.
* remote.c (add_packet_config_cmd, show_remote_cmd):
(show_remote_protocol_P_packet_cmd)
(show_remote_protocol_P_packet_cmd)
(show_remote_protocol_Z_access_wp_packet_cmd)
(show_remote_protocol_Z_hardware_bp_packet_cmd)
(show_remote_protocol_Z_packet_cmd)
(show_remote_protocol_Z_read_wp_packet_cmd)
(show_remote_protocol_Z_software_bp_packet_cmd)
(show_remote_protocol_Z_write_wp_packet_cmd)
(show_remote_protocol_binary_download_cmd)
(show_remote_protocol_p_packet_cmd)
(show_remote_protocol_qPart_auxv_packet_cmd)
(show_remote_protocol_qSymbol_packet_cmd)
(show_remote_protocol_vcont_packet_cmd): Update.
|
|
* cli/cli-decode.c (add_setshow_enum_cmd, add_setshow_cmd_full)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Replace
print string parameter with fprint_setshow function.
* command.h (fprint_setshow_ftype): Define. Update declarations.
* cli/cli-setshow.c (do_setshow_command): When fprint_setshow is
available, use that.
* cli/cli-decode.h (struct cmd_list_element): Add field
fprint_setshow.
* complaints.c (fprint_setshow_complaints): New function.
(_initialize_complaints): Pass to add_setshow_zinteger_cmd.
* hppa-tdep.c (_initialize_hppa_tdep): Replace "print" parameter
with NULL.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
* m32r-rom.c (_initialize_m32r_rom): Ditto.
* cris-tdep.c (_initialize_cris_tdep): Ditto.
* arm-tdep.c (_initialize_arm_tdep): Ditto.
* remote-rdi.c (_initialize_remote_rdi): Ditto.
* alpha-tdep.c (_initialize_alpha_tdep): Ditto.
* dwarf2read.c (_initialize_dwarf2_read): Ditto.
* frame.c (_initialize_frame): Ditto.
* target.c (initialize_targets): Ditto.
* maint.c (_initialize_maint_cmds): Ditto.
* observer.c (_initialize_observer): Ditto.
* infcall.c (_initialize_infcall): Ditto.
* breakpoint.c (_initialize_breakpoint): Ditto.
* cli/cli-logging.c (_initialize_cli_logging): Ditto.
* remote.c (add_packet_config_cmd, _initialize_remote): Ditto.
|
|
* cli/cli-decode.c (add_setshow_enum_cmd): Drop set_result and
show_result parameters.
* mips-tdep.c (_initialize_mips_tdep): Update calls.
* command.h: Update declaration.
* arm-tdep.c (_initialize_arm_tdep, _initialize_arm_tdep): Update
calls.
|
|
Committed by Andrew Cagney.
* ada-valprint.c, aix-thread.c, alpha-nat.c: I18n markup.
* alphabsd-nat.c, alphanbsd-tdep.c, amd64-linux-nat.c: I18n markup.
* amd64-tdep.c, amd64bsd-nat.c, amd64fbsd-nat.c: I18n markup.
* arch-utils.c, arm-linux-nat.c, arm-tdep.c: I18n markup.
* armnbsd-nat.c, armnbsd-tdep.c, auxv.c, avr-tdep.c: I18n markup.
* aix-thread.c (_initialize_aix_thread): Get rid of the
deprecated_add_show_from_set call.
* alpha-tdep.c (_initialize_alpha_tdep): Ditto.
* arm-tdep.c (_initialize_arm_tdep): Ditto.
* command.h (add_setshow_enum_cmd): Add arguments for returning
new list elements.
* cli/cli-decode.c (add_setshow_enum_cmd): Ditto.
* mips-tdep.c (_initialize_mips_tdep): Modify calls to
add_setshow_enum_cmd.
|
|
* cli/cli-decode.c (add_setshow_enum_cmd): New function.
* command.h (add_setshow_enum_cmd): Declare.
* mips-tdep.c (_initialize_mips_tdep): Use add_setshow_enum_cmd.
|
|
* cli/cli-decode.c (add_setshow_cmd): Delete function.
(add_setshow_cmd_full): Make static.
* command.h (add_setshow_cmd, add_setshow_cmd_full): Delete.
(add_setshow_filename_cmd, add_setshow_string_cmd): Declare.
* cli/cli-decode.c (add_setshow_filename_cmd)
(add_setshow_string_cmd): New functions.
* nto-tdep.c (_initialize_nto_tdep): Update. Fix parameters.
* mips-tdep.c (_initialize_mips_tdep): Update.
* m32r-rom.c (_initialize_m32r_rom): Update. Update copyright.
* cli/cli-logging.c (_initialize_cli_logging): Update.
* complaints.c (_initialize_complaints): Update.
* remote.c (_initialize_remote): Update.
|
|
* cli/cli-decode.c (add_setshow_zinteger_cmd)
(add_setshow_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_cmd_full): Add help_doc and
print parameters. Make string parameters constant.
* command.h: Update. Update copyright.
* remote.c (add_packet_config_cmd, _initialize_remote): Ditto.
* observer.c (_initialize_observer): Ditto.
* frame.c (_initialize_frame): Ditto.
* complaints.c (_initialize_complaints): Ditto.
* maint.c (_initialize_maint_cmds): Ditto.
* target.c (initialize_targets): Ditto.
* cli/cli-logging.c (_initialize_cli_logging): Ditto.
* infcall.c (_initialize_infcall): Ditto.
* arm-tdep.c (_initialize_arm_tdep): Ditto.
* m32r-rom.c (_initialize_m32r_rom): Ditto.
* remote-rdi.c (_initialize_remote_rdi): Ditto.
* d10v-tdep.c (_initialize_d10v_tdep): Ditto.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
|
|
* cli/cli-decode.c (deprecated_add_show_from_set): Deprecate.
* xcoffsolib.c (_initialize_xcoffsolib): Update.
* wince.c (_initialize_wince): Update.
* win32-nat.c (_initialize_win32_nat): Update.
* varobj.c (_initialize_varobj): Update.
* valops.c (_initialize_valops): Update.
* utils.c (initialize_utils, initialize_utils): Update.
* tui/tui-win.c (_initialize_tui_win): Update.
* top.c (init_main): Update.
* symfile.c (_initialize_symfile): Update.
* source.c (_initialize_source): Update.
* somsolib.c (_initialize_som_solib): Update.
* solib.c (_initialize_solib): Update.
* solib-frv.c (_initialize_frv_solib): Update.
* serial.c (_initialize_serial): Update.
* ser-go32.c (_initialize_ser_dos, _initialize_ser_dos): Update.
* remote.c (_initialize_remote, _initialize_remote): Update.
* remote-vx.c (_initialize_vx): Update.
* remote-utils.c (_initialize_sr_support): Update.
* remote-sds.c (_initialize_remote_sds): Update.
* remote-mips.c (_initialize_remote_mips): Update.
* remote-e7000.c (_initialize_remote_e7000): Update.
* proc-api.c (_initialize_proc_api): Update.
* printcmd.c: Update.
* parse.c (_initialize_parse): Update.
* pa64solib.c (_initialize_pa64_solib): Update.
* p-valprint.c (_initialize_pascal_valprint): Update.
* monitor.c (_initialize_remote_monitors): Update.
* mips-tdep.c (_initialize_mips_tdep): Update.
* mcore-tdep.c (_initialize_mcore_tdep): Update.
* maint.c (_initialize_maint_cmds): Update.
* lin-lwp.c (_initialize_lin_lwp): Update.
* language.c (_initialize_language): Update.
* kod.c (_initialize_kod): Update.
* infrun.c (set_schedlock_func, _initialize_infrun): Update.
* i386-tdep.c (_initialize_i386_tdep): Update.
* gdbtypes.c (build_gdbtypes, _initialize_gdbtypes): Update.
* gdbarch.sh: Update.
* gdbarch.c: Re-generate.
* gdb-events.sh: Update.
* gdb-events.c: Re-generate.
* frame.c (_initialize_frame): Update.
* exec.c: Update.
* demangle.c (_initialize_demangler): Update.
* dcache.c (_initialize_dcache): Update.
* cris-tdep.c (_initialize_cris_tdep, cris_version_update): Update.
* cp-valprint.c (_initialize_cp_valprint): Update.
* corefile.c (_initialize_core): Update.
* command.h: Update.
* cli/cli-decode.h: Update.
* cli/cli-cmds.c (init_cli_cmds): Update.
* charset.c (_initialize_charset): Update.
* breakpoint.c (_initialize_breakpoint): Update.
* arm-tdep.c (_initialize_arm_tdep_initialize_arm_tdep): Update.
* alpha-tdep.c (_initialize_alpha_tdep): Update.
* aix-thread.c (_initialize_aix_thread): Update.
|
|
* cli/cli-decode.c (add_setshow_zinteger_cmd): New function.
* command.h (add_setshow_zinteger_cmd): Declare.
|