| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This changes find_and_open_script to return a
gdb::optional<open_script>, where open_script is a new type
encapsulating the two return values. The new type helps avoid
cleanups in the callers.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (find_and_open_script): Change return type.
Remove "streamp" and "full_path" parameters.
(source_script_with_search): Update.
* auto-load.c (source_script_file): Update.
* cli/cli-cmds.h (find_and_open_script): Change type.
(open_script): New struct.
|
|
This introduces gdb_file_up, a unique pointer holding a FILE*, and
then changes some code in gdb to use it. In particular
gdb_fopen_cloexec now returns a gdb_file_up. This allow removing some
cleanups.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* xml-support.c (xml_fetch_content_from_file): Update.
* ui-file.c (stdio_file::open): Update.
* tracefile-tfile.c (tfile_start): Update.
* remote.c (remote_file_put, remote_file_get): Update.
* nat/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_get_state, linux_proc_tid_get_name): Update.
* nat/linux-osdata.c (linux_common_core_of_thread): Update.
(command_from_pid, commandline_from_pid, linux_xfer_osdata_cpus)
(print_sockets, linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Update.
* nat/linux-btrace.c (linux_determine_kernel_start): Update.
* linux-nat.c (linux_proc_pending_signals): Update.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_file_up.
(file_closer): Remove.
* compile/compile.c (compile_to_object): Update.
* common/filestuff.h (struct gdb_file_deleter): New.
(gdb_file_up): New typedef.
(gdb_fopen_cloexec): Change return type.
* common/filestuff.c (gdb_fopen_cloexec): Return gdb_file_up.
* cli/cli-dump.c (fopen_with_cleanup): Remove.
(dump_binary_file, restore_binary_file): Update.
* auto-load.c (auto_load_objfile_script_1): Update.
|
|
Now, GDB is able to dynamically create i386-linux target descriptions
from features, instead of using pre-generated target descriptions. These
pre-generated target descriptions are no longer used by GDB (note that
they are still used by GDBserver).
This patch add a new maint command "maint check xml-descriptions" to test
dynamically generated tdesc are identical to these generated from xml files.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* cli/cli-cmds.c (maintenancechecklist): New variable.
* gdbcmd.h (maintenancechecklist): Declare it.
* i386-linux-tdep.c (_initialize_i386_linux_tdep) [GDB_SELF_TEST]:
Call i386_linux_read_description with different masks.
* maint.c (maintenance_check_command): New function.
(_initialize_maint_cmds): Call add_prefix_cmd.
* target-descriptions.c (tdesc_reg): override operator != and ==.
(tdesc_type): Likewise.
(tdesc_feature): Likewise.
(target_desc): Likewise.
[GDB_SELF_TEST] (selftests::record_xml_tdesc): New function.
(maintenance_check_xml_descriptions): New function.
(_initialize_target_descriptions) Add command "xml-descriptions".
* target-descriptions.h (selftests::record_xml_tdesc): Declare.
gdb/testsuite:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.gdb/unittest.exp: Invoke command
"maintenance check xml-descriptions".
gdb/doc:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Maintenance Commands): Document command
"maint check xml-descriptions".
|
|
One of the most annoying (to me) things about GDB's completion is when
you have overloads in your program, and you want to set a breakpoint
in one of them:
void function(int); // set breakpoint here.
void function(long);
(gdb) b -f func[TAB]
(gdb) b -f function( # ok, gdb completed as much as possible.
(gdb) b -f function([TAB] # show me the overloads, please.
<_all_ symbols in the program are shown...>
E.g., when debugging GDB, that'd be:
(gdb) b -f function([TAB]
(anonymous namespace)::get_global()::global pt_insn_get_offset@plt scm_new_port_table_entry
asprintf pt_pkt_alloc_decoder scm_new_port_table_entry@plt
asprintf@plt pt_pkt_alloc_decoder@plt scm_out_of_range
bt_ctf_get_char_array pt_pkt_sync_forward scm_out_of_range@plt
bt_ctf_get_char_array@plt pt_pkt_sync_forward@plt scm_putc
bt_ctf_get_uint64 pwrite scm_putc@plt
bt_ctf_get_uint64@plt pwrite@plt scm_reverse_x
bt_ctf_iter_read_event PyErr_Restore scm_reverse_x@plt
bt_ctf_iter_read_event@plt PyErr_Restore@plt scm_set_port_filename_x
<snip...>
Now that's a load of completely useless completions.
The reason GDB offers those is that the completer relies on readline
figuring out the completion word point in the input line based on the
language's word break characters, which include "(". So readline
tells the completer to complete on "", the string that is after '('.
Likewise, if you type "function(i[TAB]" to try to complete to "int",
you're out of luck. GDB shows you all the symbols in the program that
start with "i"... This makes sense for the expression completer, as
what you'd want to type is e.g., a global variable, say:
(gdb) print function(i[TAB]
but, it makes no sense when specifying a function name for a
breakpoint location.
To get around that limitation, users need to quote the function name,
like:
(gdb) b -f 'function([TAB]
function(int) function(long)
(gdb) b 'function(i[TAB]
(gdb) b 'function(int)' # now completes correctly!
Note that the quoting is only necessary for completion. Creating the
breakpoint does not require the quoting:
(gdb) b -f function(int) [RET]
Breakpoint 1 at ....
This patch removes this limitation.
(
Actually, it's a necessary patch, though not sufficient. That'll
start working correctly by the end of the series. With this patch, if try it,
you'll see:
(gdb) b -f function(i[TAB]
(gdb) b -f function
i.e., gdb strips everything after the "(". That's caused by some code
in symtab.c that'll be eliminated further down the series. These
patches are all unfortunately interrelated, which is also the reason
new tests only appear much later in the series.
But let's ignore that reality for the remainder of the description.
)
So... this patch gets rid of the need for quoting.
It does that by adding a way for a completer to control the exact
completion word point that readline should start the completion
request for, instead of letting readline try to figure it out using
the current language's word break chars array, and often failing.
In the case above, we want the completer to figure out that it's
completing a function name that starts with "function(i". It now
does.
It took me a while to figure out a way to ask readline to "use this
exact word point", and for a while I feared that it'd be impossible
with current readline (and having to rely on master readline for core
functionality is something I'd like to avoid very much). Eventually,
after several different attempts, I came up with what is described in
the comment above gdb_custom_word_point_brkchars in the patch.
With this patch, the handle_brkchars phase of the explicit location
completer advances the expected word point as it parses the input line
left to right, until it figures out exactly what we're completing,
instead of expecting readline to break the string using the word break
characters, and then having the completer heuristically fix up a bad
decision by parsing the input string backwards. This allows correctly
knowning that we're completing a symbol name after -function, complete
functions without quoting, etc.
Later, we'll make use of this same mechanims to implement a proper
linespec completer that avoids need for quoting too.
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_collect_symbol_completion_matches): Add
complete_symbol_mode parameter.
* cli/cli-cmds.c (complete_command): Get the completion result out
of the handle_brkchars tracker if used a custom word point.
* completer.c: Include "linespec.h".
(enum explicit_location_match_type) <MATCH_LINE>: New enumerator.
(advance_to_expression_complete_word_point): New.
(completion_tracker::completes_to_completion_word): New.
(complete_files_symbols): Pass down
complete_symbol_mode::EXPRESSION.
(explicit_options, probe_options): New.
(collect_explicit_location_matches): Complete on the
explictit_loc->foo instead of word. Use
linespec_complete_function. Handle MATCH_LINE. Handle offering
keyword and options completions.
(backup_text_ptr): Delete.
(skip_keyword): New.
(complete_explicit_location): Remove 'word' parameter. Add
language, quoted_arg_start and quoted_arg_end parameters.
Rewrite, parsing left to right.
(location_completer): Rewrite.
(location_completer_handle_brkchars): New function.
(symbol_completer): Pass down complete_symbol_mode::EXPRESSION.
(enum complete_line_internal_reason): Adjust comments.
(completion_tracker::discard_completions): New.
(completer_handle_brkchars_func_for_completer): Handle
location_completer.
(gdb_custom_word_point_brkchars)
(gdb_org_rl_basic_quote_characters): New.
(gdb_completion_word_break_characters_throw)
(completion_find_completion_word): Handle trackers that use a
custom word point.
(completion_tracker::advance_custom_word_point_by): New.
(completion_tracker::build_completion_result): Don't rely on
readline appending the quote char.
(gdb_rl_attempted_completion_function_throw): Handle trackers that
use a custom word point.
(gdb_rl_attempted_completion_function): Restore
rl_basic_quote_characters.
* completer.h (class completion_tracker): Extend intro comment.
(completion_tracker::set_quote_char)
(completion_tracker::quote_char)
(completion_tracker::set_use_custom_word_point)
(completion_tracker::use_custom_word_point)
(completion_tracker::custom_word_point)
(completion_tracker::set_custom_word_point)
(completion_tracker::advance_custom_word_point_by)
(completion_tracker::completes_to_completion_word)
(completion_tracker::discard_completions): New methods.
(completion_tracker::m_quote_char)
(completion_tracker::m_use_custom_word_point)
(completion_tracker::m_custom_word_point): New fields.
(advance_to_expression_complete_word_point): Declare.
* f-lang.c (f_collect_symbol_completion_matches): Add
complete_symbol_mode parameter.
* language.h (struct language_defn)
<la_collect_symbol_completion_matches>: Add complete_symbol_mode
parameter.
* linespec.c (linespec_keywords): Add NULL terminator. Make extern.
(linespec_complete_function): New function.
(linespec_lexer_lex_keyword): Adjust.
* linespec.h (linespec_keywords, linespec_complete_function): New
declarations.
* location.c (find_end_quote): New function.
(explicit_location_lex_one): Add explicit_completion_info
parameter. Save quoting info. Don't throw if being called for
completion. Don't handle Ada operators here.
(is_cp_operator, skip_op_false_positives, first_of)
(explicit_location_lex_one_function): New function.
(string_to_explicit_location): Replace 'dont_throw' parameter with
an explicit_completion_info pointer parameter. Handle it. Don't
use explicit_location_lex_one to lex function names. Use
explicit_location_lex_one_function instead.
* location.h (struct explicit_completion_info): New.
(string_to_explicit_location): Replace 'dont_throw' parameter with
an explicit_completion_info pointer parameter.
* symtab.c (default_collect_symbol_completion_matches_break_on):
Add complete_symbol_mode parameter. Handle LINESPEC mode.
(default_collect_symbol_completion_matches)
(collect_symbol_completion_matches): Add complete_symbol_mode
parameter.
(collect_symbol_completion_matches_type): Pass down
complete_symbol_mode::EXPRESSION.
(collect_file_symbol_completion_matches): Add complete_symbol_mode
parameter. Handle LINESPEC mode.
* symtab.h (complete_symbol_mode): New.
(default_collect_symbol_completion_matches_break_on)
(default_collect_symbol_completion_matches)
(collect_symbol_completion_matches)
(collect_file_symbol_completion_matches): Add complete_symbol_mode
parameter.
gdb/testsuite/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* gdb.linespec/ls-errs.exp (do_test): Adjust expected output.
|
|
The linespec/locations/completer testcase added later in the series
tests every completion with both TAB completion and the "complete"
command. This exposed problems in the "complete" command, around
determining the completion word point.
First, the complete command has a too-simple approximation of what
readline's TAB-completion code does to find the completion word point.
Unfortunately, readline doesn't expose the functionality it uses
internally, so to fix this this patch copies over the relevant code,
and adjusts it a bit to better fit the use cases we need it for.
(Specifically, our version avoids relying on the
rl_word_break_characters, etc. globals, and instead takes those as
arguments.)
A following patch will want to use this function for TAB-completion
too, but the "complete" command was a good excuse to split this to a
separate patch.
Then, notice how the complete_command does not call into the completer
for the command being completed to determine the right set of word
break characters. It always uses the default set. That is fixed by
having the "complete" command call into complete_line_internal for a
full handle_brkchars phase, just TAB-completion.
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (complete_command): Use a completion tracker
along with completion_find_completion_word for handle_brkchars
phase.
* completer.c (RL_QF_SINGLE_QUOTE, RL_QF_DOUBLE_QUOTE)
(RL_QF_BACKSLASH, RL_QF_OTHER_QUOTE): New.
(struct gdb_rl_completion_word_info): New.
(gdb_rl_find_completion_word): New.
(completion_find_completion_word): New.
* completer.h (completion_find_completion_word): Declare.
|
|
This patch reworks the whole completion machinery, and prepares it
for later enhancements.
Adds a new "completion_tracker" class that is meant to hold everything
about the state of the current completion operation.
This class now has the responsibility of tracking the list of
completion matches, and checking whether the max completions limit has
been reached. You can look at this as this patch starting out by
C++fying the existing "completion_tracker" in symtab.c (it's just an
htab_t typedef currently), moving it to completer.h/c, and then making
it a class/generalizing/enhancing it.
Unlike with the current tracking, completion_tracker now checks
whether the limit has been reached on each completion match list
insertion. This both simplifies the max-completions handling code
(maybe_add_completion_enum is gone, for example), and is a
prerequisite for follow up patches.
The current completion_tracker is only used for symbol completions,
and the symbol code gets at the current instance via globals. This
patch cleans that up by adding a completion_tracker reference to the
signature of the completion functions, and passing the tracker around
everywhere necessary.
Then, the patch changes how the completion match list is handed over
to readline. Currently, we're using the rl_completion_entry_function
readline entry point, and the patch switches to
rl_attempted_completion_function. A following patch will want to let
GDB itself decide the common completion prefix between all matches
(what readline calls the "lowest common denominator"), instead of
having readline compute it, and that's not possible with the
rl_completion_entry_function entry point. Also,
rl_attempted_completion_function lets GDB hand over the match list to
readline as an array in one go instead of passing down matches one by
one, so from that angle it's a nicer entry point anyway.
Lastly, the patch catches exceptions around the readline entry points,
because we can't let C++ exceptions cross readline. We handle that in
the readline input entry point, but the completion entry point isn't
guarded, so GDB can abort if completion throws. E.g., in current
master:
(gdb) b -function "fun<tab>
terminate called after throwing an instance of 'gdb_exception_RETURN_MASK_ERROR'
Aborted (core dumped)
This patch fixes that. This will be exercised in the new tests added
later on in the series.
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* ada-lang.c (symbol_completion_match): Adjust comments.
(symbol_completion_add): Replace vector parameter with
completion_tracker parameter. Use it.
(ada_make_symbol_completion_list): Rename to...
(ada_collect_symbol_completion_matches): ... this. Add
completion_tracker parameter and use it.
(ada_language_defn): Adjust.
* break-catch-syscall.c (catch_syscall_completer): Adjust
prototype and work with completion_tracker instead of VEC.
* breakpoint.c (condition_completer): Adjust prototype and work
with completion_tracker instead of VEC.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Adjust to renames.
* cli/cli-cmds.c (complete_command): Rework using
completion_tracker. Catch exceptions when completing.
* cli/cli-decode.c (integer_unlimited_completer)
(complete_on_cmdlist, complete_on_enum): Adjust prototype and work
with completion_tracker instead of VEC.
* command.h (struct completion_tracker): Forward declare.
(completer_ftype, completer_handle_brkchars_ftype): Change
types.
(complete_on_cmdlist, complete_on_enum): Adjust.
* completer.c: Include <algorithm>.
(struct gdb_completer_state): New.
(current_completion): New global.
(readline_line_completion_function): Delete.
(noop_completer, filename_completer)
(filename_completer_handle_brkchars, complete_files_symbols)
(linespec_location_completer): Adjust to work with a
completion_tracker instead of a VEC.
(string_or_empty): New.
(collect_explicit_location_matches): Adjust to work with a
completion_tracker instead of a VEC.
(explicit_location_completer): Rename to ...
(complete_explicit_location): ... this and adjust to work with a
completion_tracker instead of a VEC.
(location_completer): Adjust to work with a completion_tracker
instead of a VEC.
(add_struct_fields): Adjust to work with a completion_list instead
of VEC.
(expression_completer): Rename to ...
(complete_expression): ... this and adjust to work with a
completion_tracker instead of a VEC. Use complete_files_symbols.
(expression_completer): Reimplement on top of complete_expression.
(symbol_completer): Adjust to work with a completion_tracker
instead of a VEC.
(enum complete_line_internal_reason): Add describing comments.
(complete_line_internal_normal_command): Adjust to work with a
completion_tracker instead of a VEC.
(complete_line_internal): Rename to ...
(complete_line_internal_1): ... this and adjust to work with a
completion_tracker instead of a VEC. Assert TEXT is NULL in the
handle_brkchars phase.
(new_completion_tracker): Delete.
(complete_line_internal): Reimplement as TRY/CATCH wrapper around
complete_line_internal_1.
(free_completion_tracker): Delete.
(INITIAL_COMPLETION_HTAB_SIZE): New.
(completion_tracker::completion_tracker)
(completion_tracker::~completion_tracker): New.
(maybe_add_completion): Delete.
(completion_tracker::maybe_add_completion)
(completion_tracker::add_completion)
(completion_tracker::add_completions): New.
(throw_max_completions_reached_error): Delete.
(complete_line): Adjust to work with a completion_tracker instead
of a VEC. Don't create a completion_tracker_t or check for max
completions here.
(command_completer, command_completer_handle_brkchars)
(signal_completer, reg_or_group_completer_1)
(reg_or_group_completer, default_completer_handle_brkchars):
Adjust to work with a completion_tracker.
(gdb_completion_word_break_characters_throw): New.
(gdb_completion_word_break_characters): Reimplement.
(line_completion_function): Delete.
(completion_tracker::recompute_lowest_common_denominator)
(expand_preserving_ws)
(completion_tracker::build_completion_result)
(completion_result::completion_result)
(completion_result::completion_result)
(completion_result::~completion_result)
(completion_result::completion_result)
(completion_result::release_match_list, compare_cstrings)
(completion_result::sort_match_list)
(completion_result::reset_match_list)
(gdb_rl_attempted_completion_function_throw)
(gdb_rl_attempted_completion_function): New.
* completer.h (completion_list, struct completion_result)
(class completion_tracker): New.
(complete_line): Add completion_tracker parameter.
(readline_line_completion_function): Delete.
(gdb_rl_attempted_completion_function): New.
(noop_completer, filename_completer, expression_completer)
(location_completer, symbol_completer, command_completer)
(signal_completer, reg_or_group_completer): Update prototypes.
(completion_tracker_t, new_completion_tracker)
(make_cleanup_free_completion_tracker): Delete.
(enum maybe_add_completion_enum): Delete.
(maybe_add_completion): Delete.
(throw_max_completions_reached_error): Delete.
* corefile.c (complete_set_gnutarget): Adjust to work with a
completion_tracker instead of a VEC.
* cp-abi.c (cp_abi_completer): Adjust to work with a
completion_tracker instead of a VEC.
* d-lang.c (d_language_defn): Adjust.
* disasm.c (disassembler_options_completer): Adjust to work with a
completion_tracker instead of a VEC.
* f-lang.c (f_make_symbol_completion_list): Rename to ...
(f_collect_symbol_completion_matches): ... this. Adjust to work
with a completion_tracker instead of a VEC.
(f_language_defn): Adjust.
* go-lang.c (go_language_defn): Adjust.
* guile/scm-cmd.c (cmdscm_add_completion, cmdscm_completer):
Adjust to work with a completion_tracker instead of a VEC.
* infrun.c (handle_completer): Likewise.
* interps.c (interpreter_completer): Likewise.
* interps.h (interpreter_completer): Likewise.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Adjust.
* language.h (language_defn::la_make_symbol_completion_list):
Rename to ...
(language_defn::la_collect_symbol_completion_matches): ... this
and adjust to work with a completion_tracker instead of a VEC.
* m2-lang.c (m2_language_defn): Adjust.
* objc-lang.c (objc_language_defn): Adjust.
* opencl-lang.c (opencl_language_defn): Adjust.
* p-lang.c (pascal_language_defn): Adjust.
* python/py-cmd.c (cmdpy_completer_helper): Handle NULL word.
(cmdpy_completer_handle_brkchars, cmdpy_completer): Adjust to work
with a completion_tracker.
* rust-lang.c (rust_language_defn): Adjust.
* symtab.c (free_completion_list, do_free_completion_list)
(return_val, completion_tracker): Delete.
(completion_list_add_name, completion_list_add_symbol)
(completion_list_add_msymbol, completion_list_objc_symbol)
(completion_list_add_fields, add_symtab_completions): Add
completion_tracker parameter and use it.
(default_make_symbol_completion_list_break_on_1): Rename to...
(default_collect_symbol_completion_matches_break_on): ... this.
Add completion_tracker parameter and use it instead of allocating
a completion tracker here.
(default_make_symbol_completion_list_break_on): Delete old
implementation.
(default_make_symbol_completion_list): Delete.
(default_collect_symbol_completion_matches): New.
(make_symbol_completion_list): Delete.
(collect_symbol_completion_matches): New.
(make_symbol_completion_type): Rename to ...
(collect_symbol_completion_matches_type): ... this. Add
completion_tracker parameter and use it instead of VEC.
(make_file_symbol_completion_list_1): Rename to...
(collect_file_symbol_completion_matches): ... this. Add
completion_tracker parameter and use it instead of VEC.
(make_file_symbol_completion_list): Delete.
(add_filename_to_list): Use completion_list instead of a VEC.
(add_partial_filename_data::list): Now a completion_list.
(make_source_files_completion_list): Work with a completion_list
instead of a VEC.
* symtab.h: Include "completer.h".
(default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type, make_file_symbol_completion_list)
(make_source_files_completion_list): Delete.
(default_collect_symbol_completion_matches_break_on)
(default_collect_symbol_completion_matches)
(collect_symbol_completion_matches)
(collect_symbol_completion_matches_type)
(collect_file_symbol_completion_matches)
(make_source_files_completion_list): New.
* top.c (init_main): Don't install a rl_completion_entry_function
hook. Install a rl_attempted_completion_function hook instead.
* tui/tui-layout.c (layout_completer): Adjust to work with a
completion_tracker.
* tui/tui-regs.c (tui_reggroup_completer):
* tui/tui-win.c (window_name_completer, focus_completer)
(winheight_completer): Adjust to work with a completion_tracker.
* value.c: Include "completer.h".
(complete_internalvar): Adjust to work with a completion_tracker.
* value.h (complete_internalvar): Likewise.
|
|
This patch cleans up "completer_handle_brkchars" callback handling:
- Renames the function typedef to better match its intent:
completer_ftype_void -> completer_handle_brkchars_ftype
- Factors out common code in complete_line_internal handling the
"handle_brkchars" callback to a separate function.
- Centralizes all the "completer method" to "handle_brkchars method"
mapping in a single function.
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* cli/cli-decode.c (set_cmd_completer_handle_brkchars): Adjust to
renames.
* cli/cli-decode.h (struct cmd_list_element) <completer>: Move
comments to completer_ftype's declaration.
<completer_handle_brkchars>: Change type to
completer_handle_brkchars_ftype.
* command.h (completer_ftype): Add describing comment and give
names to parameters.
(completer_ftype_void): Rename to ...
(completer_handle_brkchars_ftype) ... this. Add describing comment.
(set_cmd_completer_handle_brkchars): Adjust.
* completer.c (filename_completer_handle_brkchars): New function.
(complete_line_internal_normal_command): New function, factored
out from ...
(complete_line_internal): ... here.
(command_completer_handle_brkchars)
(default_completer_handle_brkchars)
(completer_handle_brkchars_func_for_completer): New functions.
* completer.h (set_gdb_completion_word_break_characters): Delete
declaration.
(completer_handle_brkchars_func_for_completer): New declaration.
* python/py-cmd.c (cmdpy_completer_handle_brkchars): Adjust to use
completer_handle_brkchars_func_for_completer.
|
|
"make_symbol_completion_list_fn" is odly named when you look at a list
of "standard" completers, like the Python/Guile completer lists
adjusted by this patch. Rename / move it to completers.h/c, for
consistency.
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* completer.c (symbol_completer): New function, based on
make_symbol_completion_list_fn.
* completer.h (symbol_completer): New declaration.
* guile/scm-cmd.c (cmdscm_completers): Adjust.
* python/py-cmd.c (completers): Adjust.
* symtab.c (make_symbol_completion_list_fn): Delete.
* symtab.h (make_symbol_completion_list_fn): Delete.
* cli/cli-decode.c (add_cmd): Adjust.
|
|
fix last commit)
My last commit fixed a regression that happened when using
inline/multi-line commands for Python/Compile/Guile, but introduced
another regression: it is now not possible to use aliases for the
commands mentioned above. The fix is to almost revert the change I've
made and go back to using the 'struct cmd_list_element *', but at the
same time make sure that we advance the 'cmd_name' variable past all
the whitespace characters after the command name. If, after skipping
the whitespace, we encounter a '\0', it means that the command is not
inline. Otherwise, it is.
This patch also expands the testcase in order to check for aliases and
for trailing whitespace after the command name.
gdb/ChangeLog:
2017-06-30 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
PR cli/21688
* cli/cli-script.c (command_name_equals_not_inline): Remove function.
(process_next_line): New variable 'inline_cmd'.
Adjust 'if' clauses for "python", "compile" and "guile" to use
'command_name_equals' and check for '!inline_cmd'.
gdb/testsuite/ChangeLog:
2017-06-30 Sergio Durigan Junior <sergiodj@redhat.com>
PR cli/21688
* gdb.python/py-cmd.exp (test_python_inline_or_multiline): Add new
tests for alias commands and trailing whitespace.
|
|
This bug is a regression caused by the following commit:
604c4576fdcfc4e7c28f569b3748a1b6b4e0dbd4 is the first bad commit
commit 604c4576fdcfc4e7c28f569b3748a1b6b4e0dbd4
Author: Jerome Guitton <guitton@adacore.com>
Date: Tue Jan 10 15:15:53 2017 +0100
The problem happens because, on cli/cli-script.c:process_next_line,
GDB is not using the command line string to identify which command to
run, but it instead using the 'struct cmd_list_element *' that is
obtained by using the mentioned string. The problem with that is that
the 'struct cmd_list_element *' doesn't have any information on
whether the command issued by the user is a multi-line or inline one.
A multi-line command is a command that will necessarily be composed of
more than 1 line. For example:
(gdb) if 1
>python
>print ('hello')
>end
>end
As can be seen in the example above, the 'python' command actually
"opens" a new command line (represented by the change in the
indentation) that will then be used to enter Python code. OTOH, an
inline command is a command that is "self-contained" in a single line,
for example:
(gdb) if 1
>python print ('hello')
>end
This Python command is a one-liner, and therefore there is no other
Python code that can be entered for this same block. There is also no
change in the indentation.
So, the fix is somewhat simple: we have to revert the change and use
the full command line string passed to process_next_line in order to
identify whether we're dealing with a multi-line or an inline command.
This commit does just that. As can be seen, this regression also
affects other languages, like guile or the compile framework. To make
things clearer, I decided to create a new helper function responsible
for identifying a non-inline command.
Testcase is attached.
gdb/ChangeLog:
2017-06-30 Sergio Durigan Junior <sergiodj@redhat.com>
PR cli/21688
* cli/cli-script.c (command_name_equals_not_inline): New function.
(process_next_line): Adjust 'if' clauses for "python", "compile"
and "guile" to use command_name_equals_not_inline.
gdb/testsuite/ChangeLog:
2017-06-30 Sergio Durigan Junior <sergiodj@redhat.com>
PR cli/21688
* gdb.python/py-cmd.exp (test_python_inline_or_multiline): New
procedure. Call it.
|
|
In some cases we've been replacing heap-allocated gdb_byte buffers
managed with xmalloc/make_cleanup(xfree) with gdb::vector<gdb_byte>.
That usually pessimizes the code a little bit because std::vector
value-initializes elements (which for gdb_byte means
zero-initialization), while if you're creating a temporary buffer,
you're most certaintly going to fill it in with some data. An
alternative is to use
unique_ptr<gdb_byte[]> buf (new gdb_byte[size]);
but it looks like that's not very popular.
Recently, a use of obstacks in dwarf2read.c was replaced with
std::vector<gdb_byte> and that as well introduced a pessimization for
always memsetting the buffer when it's garanteed that the zeros will
be overwritten immediately. (see dwarf2read.c change in this patch to
find it.)
So here's a different take at addressing this issue "by design":
#1 - Introduce default_init_allocator<T>
I.e., a custom allocator that does default construction using default
initialization, meaning, no more zero initialization. That's the
default_init_allocation<T> class added in this patch.
See "Notes" at
<http://en.cppreference.com/w/cpp/container/vector/resize>.
#2 - Introduce def_vector<T>
I.e., a convenience typedef, because typing the allocator is annoying:
using def_vector<T> = std::vector<T, gdb::default_init_allocator<T>>;
#3 - Introduce byte_vector
Because gdb_byte vectors will be the common thing, add a convenience
"byte_vector" typedef:
using byte_vector = def_vector<gdb_byte>;
which is really the same as:
std::vector<gdb_byte, gdb::default_init_allocator<gdb_byte>>;
The intent then is to make "gdb::byte_vector" be the go-to for dynamic
byte buffers. So the less friction, the better.
#4 - Adjust current code to use it.
To set the example going forward. Replace std::vector uses and also
unique_ptr<byte[]> uses.
One nice thing is that with this allocator, for changes like these:
-std::unique_ptr<byte[]> buf (new gdb_byte[some_size]);
+gdb::byte_vector buf (some_size);
fill_with_data (buf.data (), buf.size ());
the generated code is the same as before. I.e., the compiler
de-structures the vector and gets rid of the unused "reserved vs size"
related fields.
The other nice thing is that it's easier to write
gdb::byte_vector buf (size);
than
std::unique_ptr<gdb_byte[]> buf (new gdb_byte[size]);
or even (C++14):
auto buf = std::make_unique<gdb_byte[]> (size); // zero-initializes...
#5 - Suggest s/std::vector<gdb_byte>/gdb::byte_vector/ going forward.
Note that this commit actually fixes a couple of bugs where the current
code is incorrectly using "std::vector::reserve(new_size)" and then
accessing the vector's internal buffer beyond the vector's size: see
dwarf2loc.c and charset.c. That's undefined behavior and may trigger
debug mode assertion failures. With default_init_allocator,
"resize()" behaves like "reserve()" performance wise, in that it
leaves new elements with unspecified values, but, it does that safely
without triggering undefined behavior when you access those values.
gdb/ChangeLog:
2017-06-14 Pedro Alves <palves@redhat.com>
* ada-lang.c: Include "common/byte-vector.h".
(ada_value_primitive_packed_val): Use gdb::byte_vector.
* charset.c (wchar_iterator::iterate): Resize the vector instead
of reserving it.
* common/byte-vector.h: Include "common/def-vector.h".
(wchar_iterator::m_out): Now a gdb::def_vector<gdb_wchar_t>.
* cli/cli-dump.c: Include "common/byte-vector.h".
(dump_memory_to_file, restore_binary_file): Use gdb::byte_vector.
* common/byte-vector.h: New file.
* common/def-vector.h: New file.
* common/default-init-alloc.h: New file.
* dwarf2loc.c: Include "common/byte-vector.h".
(rw_pieced_value): Use gdb::byte_vector, and resize the vector
instead of reserving it.
* dwarf2read.c: Include "common/byte-vector.h".
(data_buf::m_vec): Now a gdb::byte_vector.
* gdb_regex.c: Include "common/def-vector.h".
(compiled_regex::compiled_regex): Use gdb::def_vector<char>.
* mi/mi-main.c: Include "common/byte-vector.h".
(mi_cmd_data_read_memory): Use gdb::byte_vector.
* printcmd.c: Include "common/byte-vector.h".
(print_scalar_formatted): Use gdb::byte_vector.
* valprint.c: Include "common/byte-vector.h".
(maybe_negate_by_bytes, print_decimal_chars): Use
gdb::byte_vector.
|
|
This patch replaces compile_rx_or_error and make_regfree_cleanup with
a class that wraps a regex_t.
gdb/ChangeLog:
2017-06-07 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add gdb_regex.c.
(COMMON_OBS): Add gdb_regex.o.
* ada-lang.c (ada_add_standard_exceptions)
(ada_add_exceptions_from_frame, name_matches_regex)
(ada_add_global_exceptions, ada_exceptions_list_1): Change regex
parameter type to compiled_regex. Adjust.
(ada_exceptions_list): Use compiled_regex.
* break-catch-throw.c (exception_catchpoint::pattern): Now a
std::unique_ptr<compiled_regex>.
(exception_catchpoint::~exception_catchpoint): Remove regfree
call.
(check_status_exception_catchpoint): Adjust to use compiled_regex.
(handle_gnu_v3_exceptions): Adjust to use compiled_regex.
* breakpoint.c (solib_catchpoint::compiled): Now a
std::unique_ptr<compiled_regex>.
(solib_catchpoint::~solib_catchpoint): Remove regfree call.
(check_status_catch_solib): Adjust to use compiled_regex.
(add_solib_catchpoint): Adjust to use compiled_regex.
* cli/cli-cmds.c (apropos_command): Use compiled_regex.
* cli/cli-decode.c (apropos_cmd): Change regex parameter to
compiled_regex reference. Adjust to use it.
* cli/cli-decode.h: Remove struct re_pattern_buffer forward
declaration. Include "gdb_regex.h".
(apropos_cmd): Change regex parameter to compiled_regex reference.
* gdb_regex.c: New file.
* gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Delete
declarations.
(class compiled_regex): New.
* linux-tdep.c: Include "common/gdb_optional.h".
(struct mapping_regexes): New, factored out from
mapping_is_anonymous_p, and adjusted to use compiled_regex.
(mapping_is_anonymous_p): Use mapping_regexes wrapped in a
gdb::optional and remove cleanups. Adjust to compiled_regex.
* probe.c: Include "common/gdb_optional.h".
(collect_probes): Use compiled_regex and gdb::optional and remove
cleanups.
* skip.c: Include "common/gdb_optional.h".
(skiplist_entry::compiled_function_regexp): Now a
gdb::optional<compiled_regex>.
(skiplist_entry::compiled_function_regexp_is_valid): Delete field.
(free_skiplist_entry): Remove regfree call.
(compile_skip_regexp, skip_rfunction_p): Adjust to use
compiled_regex and gdb::optional.
* symtab.c: Include "common/gdb_optional.h".
(search_symbols): Use compiled_regex and gdb::optional.
* utils.c (do_regfree_cleanup, make_regfree_cleanup)
(get_regcomp_error, compile_rx_or_error): Delete. Some bits moved
to gdb_regex.c.
|
|
When we add alias command, we call add_alias_cmd and pass the alias name
and command name. This implicitly requires the command and its prefix
commands are already added to cmdlist. This may not be true, for example,
add_com_alias ("tty", "set inferior-tty", class_alias, 0);
"inferior-tty" command is added to setlist, but setlist may not be added
to cmdlist (It depends on the order of related _initialize_XXX functions
called) so that we can't find "set inferior-tty" from cmdlist.
This patch fixes this problem by passing cmd_list_element of "inferior-tty"
to add_alias_cmd, so that cmd_list_element of "inferior-tty" doesn't have
to be reachable from cmdlist at that moment.
gdb:
2017-05-17 Yao Qi <yao.qi@linaro.org>
* cli/cli-decode.c (add_alias_cmd): New function.
* command.h (add_alias_cmd): Declare.
* infcmd.c (_initialize_infcmd): Don't call add_com_alias,
instead call add_alias_cmd.
gdb/testsuite:
2017-05-17 Simon Marchi <simon.marchi@ericsson.com>
* gdb.base/set-inferior-tty.exp (test_set_inferior_tty): Add
argument command.
(top-level): Invoke test_set_inferior_tty.
|
|
This patch changes various places to use ui_out_emit_tuple,
eliminating a number of cleanups. This patch only tackles "easy"
cases, which are ones where the cleanups in question were
block-structured and did not involve any changes other than the
obvious replacement.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* record-btrace.c (record_btrace_insn_history)
(record_btrace_insn_history_range, record_btrace_call_history)
(record_btrace_call_history_range): Use ui_out_emit_tuple.
* thread.c (do_captured_list_thread_ids, print_thread_info_1): Use
ui_out_emit_tuple.
* stack.c (print_frame_info): Use ui_out_emit_tuple.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple.
* skip.c (skip_info): Use ui_out_emit_tuple.
* remote.c (show_remote_cmd): Use ui_out_emit_tuple.
* progspace.c (print_program_space): Use ui_out_emit_tuple.
* probe.c (info_probes_for_ops): Use ui_out_emit_tuple.
* osdata.c (info_osdata): Use ui_out_emit_tuple.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_tuple.
* mi/mi-main.c (print_one_inferior, list_available_thread_groups)
(output_register, mi_cmd_data_read_memory)
(mi_cmd_data_read_memory_bytes, mi_load_progress)
(mi_cmd_trace_frame_collected): Use ui_out_emit_tuple.
* mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one):
Use ui_out_emit_tuple.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use
ui_out_emit_tuple.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions)
(mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_tuple.
* inferior.c (print_inferior): Use ui_out_emit_tuple.
* gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple.
* disasm.c (do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly): Use ui_out_emit_tuple.
* cp-abi.c (list_cp_abis): Use ui_out_emit_tuple.
* cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple.
* breakpoint.c (print_one_breakpoint_location)
(print_one_breakpoint): Use ui_out_emit_tuple.
* auto-load.c (print_script, info_auto_load_cmd): Use
ui_out_emit_tuple.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple.
|
|
This changes a few more places to use scoped_restore, allowing some
cleanup removals.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (exec_direction_forward): Remove.
(exec_reverse_continue, mi_execute_command): Use scoped_restore.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Use
scoped_restore.
* guile/guile.c (guile_repl_command, guile_command)
(gdbscm_execute_gdb_command): Use scoped_restore.
* go-exp.y (go_parse): Use scoped_restore.
* d-exp.y (d_parse): Use scoped_restore.
* cli/cli-decode.c (cmd_func): Use scoped_restore.
* c-exp.y (c_parse): Use scoped_restore.
|
|
This introduces command_line_up, a unique_ptr for command_line
objects, and changes many places to use it. This removes a number of
cleanups.
Command lines are funny in that sometimes they are reference counted.
Once there is more C++-ification of some of the users, perhaps all of
these can be changed to use shared_ptr instead.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* tracepoint.c (actions_command): Update.
* python/python.c (python_command, python_interactive_command):
Update.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Update.
* guile/guile.c (guile_command): Update.
* defs.h (read_command_lines, read_command_lines_1): Return
command_line_up.
(command_lines_deleter): New struct.
(command_line_up): New typedef.
* compile/compile.c (compile_code_command)
(compile_print_command): Update.
* cli/cli-script.h (get_command_line, copy_command_lines): Return
command_line_up.
(make_cleanup_free_command_lines): Remove.
* cli/cli-script.c (get_command_line, read_command_lines_1)
(copy_command_lines): Return command_line_up.
(while_command, if_command, read_command_lines, define_command)
(document_command): Update.
(do_free_command_lines_cleanup, make_cleanup_free_command_lines):
Remove.
* breakpoint.h (breakpoint_set_commands): Change type of
"commands".
* breakpoint.c (breakpoint_set_commands): Change type of
"commands". Update.
(do_map_commands_command, update_dprintf_command_list)
(create_tracepoint_from_upload): Update.
|
|
This removes make_cleanup_delete_event_location and instead changes
the various location functions to return an event_location_up, a new
unique_ptr typedef.
This is largely straightforward, but be sure to examine the
init_breakpoint_sal change. I believe the code I deleted there is
dead, because "location != NULL" can never be true in that branch; but
you should double-check.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* tracepoint.c (scope_info): Update.
* spu-tdep.c (spu_catch_start): Update.
* python/python.c (gdbpy_decode_line): Update.
* python/py-finishbreakpoint.c (bpfinishpy_init): Update.
* python/py-breakpoint.c (bppy_init): Update.
* probe.c (parse_probes): Update.
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Update.
* location.h (event_location_deleter): New struct.
(event_location_up): New typedef.
(new_linespec_location, new_address_location, new_probe_location)
(new_explicit_location, copy_event_location)
(string_to_event_location, string_to_event_location_basic)
(string_to_explicit_location): Update return type.
(make_cleanup_delete_event_location): Remove.
* location.c (new_linespec_location, new_address_location)
(new_probe_location, new_explicit_location, copy_event_location):
Return event_location_up.
(delete_event_location_cleanup)
(make_cleanup_delete_event_location): Remove.
(string_to_explicit_location, string_to_event_location_basic)
(string_to_event_location): Return event_location_up.
* linespec.c (canonicalize_linespec, event_location_to_sals)
(decode_line_with_current_source)
(decode_line_with_last_displayed, decode_objc): Update.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Update.
* completer.c (location_completer): Update.
* cli/cli-cmds.c (edit_command, list_command): Update.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint)
(create_thread_event_breakpoint): Update.
(init_breakpoint_sal): Update. Remove some dead code.
(create_breakpoint_sal): Change type of "location". Update.
(create_breakpoints_sal, create_breakpoint, break_command_1)
(dprintf_command, break_range_command, until_break_command)
(init_ada_exception_breakpoint)
(strace_marker_create_sals_from_location)
(update_static_tracepoint, trace_command, ftrace_command)
(strace_command, create_tracepoint_from_upload): Update.
* break-catch-throw.c (re_set_exception_catchpoint): Update.
* ax-gdb.c (agent_command_1): Update.
|
|
This is the remainder boring constification that all looks more of less
borderline obvious IMO.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* ada-exp.y (yyerror): Constify.
* ada-lang.c (bound_name, get_selections)
(ada_variant_discrim_type)
(ada_variant_discrim_name, ada_value_struct_elt)
(ada_lookup_struct_elt_type, is_unchecked_variant)
(ada_which_variant_applies, standard_exc, ada_get_next_arg)
(catch_ada_exception_command_split)
(catch_ada_assert_command_split, catch_assert_command)
(ada_op_name): Constify.
* ada-lang.h (ada_yyerror, get_selections)
(ada_variant_discrim_name, ada_value_struct_elt): Constify.
* arc-tdep.c (arc_print_frame_cache): Constify.
* arm-tdep.c (arm_skip_stub): Constify.
* ax-gdb.c (gen_binop, gen_struct_ref_recursive, gen_struct_ref)
(gen_aggregate_elt_ref): Constify.
* bcache.c (print_bcache_statistics): Constify.
* bcache.h (print_bcache_statistics): Constify.
* break-catch-throw.c (catch_exception_command_1):
* breakpoint.c (struct ep_type_description::description):
Constify.
(add_solib_catchpoint): Constify.
(catch_fork_command_1): Add cast.
(add_catch_command): Constify.
* breakpoint.h (add_catch_command, add_solib_catchpoint):
Constify.
* bsd-uthread.c (bsd_uthread_state): Constify.
* buildsym.c (patch_subfile_names): Constify.
* buildsym.h (next_symbol_text_func, patch_subfile_names):
Constify.
* c-exp.y (yyerror): Constify.
(token::oper): Constify.
* c-lang.h (c_yyerror, cp_print_class_member): Constify.
* c-varobj.c (cplus_describe_child): Constify.
* charset.c (find_charset_names): Add cast.
(find_charset_names): Constify array and add const_cast.
* cli/cli-cmds.c (complete_command, cd_command): Constify.
(edit_command): Constify.
* cli/cli-decode.c (lookup_cmd): Constify.
* cli/cli-dump.c (dump_memory_command, dump_value_command):
Constify.
(struct dump_context): Constify.
(add_dump_command, restore_command): Constify.
* cli/cli-script.c (get_command_line): Constify.
* cli/cli-script.h (get_command_line): Constify.
* cli/cli-utils.c (check_for_argument): Constify.
* cli/cli-utils.h (check_for_argument): Constify.
* coff-pe-read.c (struct read_pe_section_data): Constify.
* command.h (lookup_cmd): Constify.
* common/print-utils.c (decimal2str): Constify.
* completer.c (gdb_print_filename): Constify.
* corefile.c (set_gnutarget): Constify.
* cp-name-parser.y (yyerror): Constify.
* cp-valprint.c (cp_print_class_member): Constify.
* cris-tdep.c (cris_register_name, crisv32_register_name):
Constify.
* d-exp.y (yyerror): Constify.
(struct token::oper): Constify.
* d-lang.h (d_yyerror): Constify.
* dbxread.c (struct header_file_location::name): Constify.
(add_old_header_file, add_new_header_file, last_function_name)
(dbx_next_symbol_text, add_bincl_to_list)
(find_corresponding_bincl_psymtab, set_namestring)
(find_stab_function_addr, read_dbx_symtab, start_psymtab)
(dbx_end_psymtab, read_ofile_symtab, process_one_symbol):
* defs.h (command_line_input, print_address_symbolic)
(deprecated_readline_begin_hook): Constify.
* dwarf2read.c (anonymous_struct_prefix, dwarf_bool_name):
Constify.
* event-top.c (handle_line_of_input): Constify and add cast.
* exceptions.c (catch_errors): Constify.
* exceptions.h (catch_errors): Constify.
* expprint.c (print_subexp_standard, op_string, op_name)
(op_name_standard, dump_raw_expression, dump_raw_expression):
* expression.h (op_name, op_string, dump_raw_expression):
Constify.
* f-exp.y (yyerror): Constify.
(struct token::oper): Constify.
(struct f77_boolean_val::name): Constify.
* f-lang.c (f_word_break_characters): Constify.
* f-lang.h (f_yyerror): Constify.
* fork-child.c (fork_inferior): Add cast.
* frv-tdep.c (struct gdbarch_tdep::register_names): Constify.
(new_variant): Constify.
* gdbarch.sh (pstring_ptr, pstring_list): Constify.
* gdbarch.c: Regenerate.
* gdbcore.h (set_gnutarget): Constify.
* go-exp.y (yyerror): Constify.
(token::oper): Constify.
* go-lang.h (go_yyerror): Constify.
* go32-nat.c (go32_sysinfo): Constify.
* guile/scm-breakpoint.c (gdbscm_breakpoint_expression): Constify.
* guile/scm-cmd.c (cmdscm_function): Constify.
* guile/scm-param.c (pascm_param_value): Constify.
* h8300-tdep.c (h8300_register_name, h8300s_register_name)
(h8300sx_register_name): Constify.
* hppa-tdep.c (hppa32_register_name, hppa64_register_name):
Constify.
* ia64-tdep.c (ia64_register_names): Constify.
* infcmd.c (construct_inferior_arguments): Constify.
(path_command, attach_post_wait): Constify.
* language.c (show_range_command, show_case_command)
(unk_lang_error): Constify.
* language.h (language_defn::la_error)
(language_defn::la_name_of_this): Constify.
* linespec.c (decode_line_2): Constify.
* linux-thread-db.c (thread_db_err_str): Constify.
* lm32-tdep.c (lm32_register_name): Constify.
* m2-exp.y (yyerror): Constify.
* m2-lang.h (m2_yyerror): Constify.
* m32r-tdep.c (m32r_register_names): Constify and make static.
* m68hc11-tdep.c (m68hc11_register_names): Constify.
* m88k-tdep.c (m88k_register_name): Constify.
* macroexp.c (appendmem): Constify.
* mdebugread.c (fdr_name, add_data_symbol, parse_type)
(upgrade_type, parse_external, parse_partial_symbols)
(mdebug_next_symbol_text, cross_ref, mylookup_symbol, new_psymtab)
(new_symbol): Constify.
* memattr.c (mem_info_command): Constify.
* mep-tdep.c (register_name_from_keyword): Constify.
* mi/mi-cmd-env.c (mi_cmd_env_path, _initialize_mi_cmd_env):
Constify.
* mi/mi-cmd-stack.c (list_args_or_locals): Constify.
* mi/mi-cmd-var.c (mi_cmd_var_show_attributes): Constify.
* mi/mi-main.c (captured_mi_execute_command): Constify and add
cast.
(mi_execute_async_cli_command): Constify.
* mips-tdep.c (mips_register_name): Constify.
* mn10300-tdep.c (register_name, mn10300_generic_register_name)
(am33_register_name, am33_2_register_name)
* moxie-tdep.c (moxie_register_names): Constify.
* nat/linux-osdata.c (osdata_type): Constify fields.
* nto-tdep.c (nto_parse_redirection): Constify.
* objc-lang.c (lookup_struct_typedef, lookup_objc_class)
(lookup_child_selector): Constify.
(objc_methcall::name): Constify.
* objc-lang.h (lookup_objc_class, lookup_child_selector)
(lookup_struct_typedef): Constify.
* objfiles.c (pc_in_section): Constify.
* objfiles.h (pc_in_section): Constify.
* p-exp.y (struct token::oper): Constify.
(yyerror): Constify.
* p-lang.h (pascal_yyerror): Constify.
* parser-defs.h (op_name_standard): Constify.
(op_print::string): Constify.
(exp_descriptor::op_name): Constify.
* printcmd.c (print_address_symbolic): Constify.
* psymtab.c (print_partial_symbols): Constify.
* python/py-breakpoint.c (stop_func): Constify.
(bppy_get_expression): Constify.
* python/py-cmd.c (cmdpy_completer::name): Constify.
(cmdpy_function): Constify.
* python/py-event.c (evpy_add_attribute)
(gdbpy_initialize_event_generic): Constify.
* python/py-event.h (evpy_add_attribute)
(gdbpy_initialize_event_generic): Constify.
* python/py-evts.c (add_new_registry): Constify.
* python/py-finishbreakpoint.c (outofscope_func): Constify.
* python/py-framefilter.c (get_py_iter_from_func): Constify.
* python/py-inferior.c (get_buffer): Add cast.
* python/py-param.c (parm_constant::name): Constify.
* python/py-unwind.c (fprint_frame_id): Constify.
* python/python.c (gdbpy_parameter_value): Constify.
* remote-fileio.c (remote_fio_func_map): Make 'name' const.
* remote.c (memory_packet_config::name): Constify.
(show_packet_config_cmd, remote_write_bytes)
(remote_buffer_add_string):
* reverse.c (exec_reverse_once): Constify.
* rs6000-tdep.c (variant::name, variant::description): Constify.
* rust-exp.y (rustyyerror): Constify.
* rust-lang.c (rust_op_name): Constify.
* rust-lang.h (rustyyerror): Constify.
* serial.h (serial_ops::name): Constify.
* sh-tdep.c (sh_sh_register_name, sh_sh3_register_name)
(sh_sh3e_register_name, sh_sh2e_register_name)
(sh_sh2a_register_name, sh_sh2a_nofpu_register_name)
(sh_sh_dsp_register_name, sh_sh3_dsp_register_name)
(sh_sh4_register_name, sh_sh4_nofpu_register_name)
(sh_sh4al_dsp_register_name): Constify.
* sh64-tdep.c (sh64_register_name): Constify.
* solib-darwin.c (lookup_symbol_from_bfd): Constify.
* spu-tdep.c (spu_register_name, info_spu_dma_cmdlist): Constify.
* stabsread.c (patch_block_stabs, read_type_number)
(ref_map::stabs, ref_add, process_reference)
(symbol_reference_defined, define_symbol, define_symbol)
(error_type, read_type, read_member_functions, read_cpp_abbrev)
(read_one_struct_field, read_struct_fields, read_baseclasses)
(read_tilde_fields, read_struct_type, read_array_type)
(read_enum_type, read_sun_builtin_type, read_sun_floating_type)
(read_huge_number, read_range_type, read_args, common_block_start)
(find_name_end): Constify.
* stabsread.h (common_block_start, define_symbol)
(process_one_symbol, symbol_reference_defined, ref_add):
* symfile.c (get_section_index, add_symbol_file_command):
* symfile.h (get_section_index): Constify.
* target-descriptions.c (tdesc_type::name): Constify.
(tdesc_free_type): Add cast.
* target.c (find_default_run_target):
(add_deprecated_target_alias, find_default_run_target)
(target_announce_detach): Constify.
(do_option): Constify.
* target.h (add_deprecated_target_alias): Constify.
* thread.c (print_thread_info_1): Constify.
* top.c (deprecated_readline_begin_hook, command_line_input):
Constify.
(init_main): Add casts.
* top.h (handle_line_of_input): Constify.
* tracefile-tfile.c (tfile_write_uploaded_tsv): Constify.
* tracepoint.c (tvariables_info_1, trace_status_mi): Constify.
(tfind_command): Rename to ...
(tfind_command_1): ... this and constify.
(tfind_command): New function.
(tfind_end_command, tfind_start_command): Adjust.
(encode_source_string): Constify.
* tracepoint.h (encode_source_string): Constify.
* tui/tui-data.c (tui_partial_win_by_name): Constify.
* tui/tui-data.h (tui_partial_win_by_name): Constify.
* tui/tui-source.c (tui_set_source_content_nil): Constify.
* tui/tui-source.h (tui_set_source_content_nil): Constify.
* tui/tui-win.c (parse_scrolling_args): Constify.
* tui/tui-windata.c (tui_erase_data_content): Constify.
* tui/tui-windata.h (tui_erase_data_content): Constify.
* tui/tui-winsource.c (tui_erase_source_content): Constify.
* tui/tui.c (tui_enable): Add cast.
* utils.c (defaulted_query): Constify.
(init_page_info): Add cast.
(puts_debug, subset_compare): Constify.
* utils.h (subset_compare): Constify.
* varobj.c (varobj_format_string): Constify.
* varobj.h (varobj_format_string): Constify.
* vax-tdep.c (vax_register_name): Constify.
* windows-nat.c (windows_detach): Constify.
* xcoffread.c (process_linenos, xcoff_next_symbol_text): Constify.
* xml-support.c (gdb_xml_end_element): Constify.
* xml-tdesc.c (tdesc_start_reg): Constify.
* xstormy16-tdep.c (xstormy16_register_name): Constify.
* xtensa-tdep.c (xtensa_find_register_by_name): Constify.
* xtensa-tdep.h (xtensa_register_t::name): Constify.
gdb/gdbserver/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* gdbreplay.c (sync_error): Constify.
* linux-x86-low.c (push_opcode): Constify.
|
|
The main motivation here is avoiding having to write a couple casts
like these:
if (!arg)
- arg = "";
+ arg = (char *) "";
in catch_exception_command_1 and catch_exec_command_1.
That requires making ep_parse_optional_if_clause and
check_for_argument take pointers to const strings. I then tried
propagating the resulting constification all the way, but that was
spiraling out of control, so instead I settled for keeping const and
non-const overloads.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* break-catch-throw.c (handle_gnu_v3_exceptions): Constify
'cond_string' parameter.
(extract_exception_regexp): Constify 'string' parameter.
(catch_exception_command_1): Constify.
* breakpoint.c (init_catchpoint)
(create_fork_vfork_event_catchpoint): Constify 'cond_string'
parameter.
(ep_parse_optional_if_clause, catch_fork_command_1)
(catch_exec_command_1): Constify.
* breakpoint.h (init_catchpoint): Constify 'cond_string'
parameter.
(ep_parse_optional_if_clause): Constify.
* cli/cli-utils.c (remove_trailing_whitespace)
(check_for_argument): Constify.
* cli/cli-utils.h (remove_trailing_whitespace): Constify and add
non-const overload.
(check_for_argument): Likewise.
|
|
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (shell_escape): Constify 'arg' parameter.
(shell_command): New function.
(make_command): Use std::string.
(init_cli_cmds): Register shell_command instead of shell_escape.
|
|
When defining a new macro, "command" is not recognized as an alias for
"commands":
(gdb) define breakmain
Type commands for definition of "breakmain".
End with a line saying just "end".
>break main
>command
>echo "IN MAIN\n"
>end
(gdb)
There is a special case for while-stepping, where 'ws' and 'stepping' are
recognized explicitely. Instead of adding more special cases, this change
uses cli-decode.
gdb/ChangeLog:
* cli/cli-decode.c (find_command_name_length): Make it extern.
* cli/cli-decode.h (find_command_name_length): Declare.
* cli/cli-script.c (command_name_equals, line_first_arg):
New functions.
(process_next_line): Use cli-decode to parse command names.
(build_command_line): Make args a constant pointer.
gdb/testsuite/ChangeLog:
* gdb.base/define.exp: Add test for command abbreviations
in define.
|
|
Case-insensitive search for command names is an obscure undocumented
feature, which seems to be unused, is not tested and not quite
consistent. Remove it.
gdb/ChangeLog:
* cli-decode.c (lookup_cmd_1, lookup_cmd_composition):
Remove case-insensitive search.
|
|
- The interp->data field disappears, since we can put data in the
interpreter directly now. The "init" method remains in place, but
it now returns void.
- A few places check if the interpreter method is NULL before calling
it, and also check whether the method returns true/false. For some
of those methods, all current implementations always return true.
In those cases, this commit makes the C++-fied method return void
instead and cleans up the callers.
Tested on x86_64 Fedora 23.
gdb/ChangeLog:
2017-02-03 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interp_base::cli_interp_base)
(cli_interp_base::~cli_interp_base): New.
(cli_interp): New struct.
(as_cli_interp): Cast the interp itself to cli_interp.
(cli_interpreter_pre_command_loop): Rename to ...
(cli_interp_base::pre_command_loop): ... this. Remove 'self'
parameter.
(cli_interpreter_init): Rename to ...
(cli_interp::init): ... this. Remove 'self' parameter. Use
boolean. Make extern.
(cli_interpreter_resume): Rename to ...
(cli_interp::resume): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_suspend): Rename to ...
(cli_interp::suspend): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_exec): Rename to ...
(cli_interp::exec): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_supports_command_editing): Rename to ...
(cli_interp_base::supports_command_editing): ... this. Remove
'interp' parameter. Make extern.
(cli_ui_out): Rename to ...
(cli_interp::interp_ui_out): ... this. Remove 'interp' parameter.
Make extern.
(cli_set_logging): Rename to ...
(cli_interp_base::set_logging): ... this. Remove 'interp'
parameter. Make extern.
(cli_interp_procs): Delete.
(cli_interp_factory): Adjust to use "new".
* cli/cli-interp.h: Include "interps.h".
(struct cli_interp_base): New struct.
* interps.c (struct interp): Delete. Fields moved to interps.h.
(interp_new): Delete.
(interp::interp, interp::~interp): New.
(interp_set): Use bool, and return void. Assume the interpreter
has suspend, init and resume methods, and that the all return
void.
(set_top_level_interpreter): interp_set returns void.
(interp_ui_out): Adapt.
(current_interp_set_logging): Adapt.
(interp_data): Delete.
(interp_pre_command_loop, interp_supports_command_editing): Adapt.
(interp_exec): Adapt.
(top_level_interpreter_data): Delete.
* interps.h (interp_init_ftype, interp_resume_ftype)
(interp_suspend_ftype, interp_exec_ftype)
(interp_pre_command_loop_ftype, interp_ui_out_ftype): Delete.
(class interp): New.
(interp_new): Delete.
(interp_set): Now returns void. Use bool.
(interp_data, top_level_interpreter_data): Delete.
* mi/mi-common.h: Include interps.h.
(class mi_interp): Inherit from interp. Define a ctor. Declare
init, resume, suspect, exec, interp_ui_out, set_logging and
pre_command_loop methods.
* mi/mi-interp.c (as_mi_interp): Cast the interp itself.
(mi_interpreter_init): Rename to ...
(mi_interp::init): ... this. Remove the 'interp' parameter, use
bool, return void and make extern. Adjust.
(mi_interpreter_resume): ... Rename to ...
(mi_interp::resume): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(mi_interpreter_suspend): ... Rename to ...
(mi_interp::suspend): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(mi_interpreter_exec): ... Rename to ...
(mi_interp::exec): ... this. Remove the 'data' parameter and make
extern. Adjust.
(mi_interpreter_pre_command_loop): ... Rename to ...
(mi_interp::pre_command_loop): ... this. Remove the 'self'
parameter and make extern.
(mi_on_normal_stop_1): Adjust.
(mi_ui_out): Rename to ...
(mi_interp::interp_ui_out): ... this. Remove the 'interp'
parameter and make extern. Adjust.
(mi_set_logging): Rename to ...
(mi_interp::set_logging): ... this. Remove the 'interp'
parameter and make extern. Adjust.
(mi_interp_procs): Delete.
(mi_interp_factory): Adjust to use 'new'.
* mi/mi-main.c (mi_cmd_gdb_exit, captured_mi_execute_command)
(mi_print_exception, mi_execute_command, mi_load_progress):
Adjust.
* tui/tui-interp.c (tui_interp): New class.
(as_tui_interp): Return a tui_interp pointer.
(tui_on_normal_stop, tui_on_signal_received)
(tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
(tui_on_no_history, tui_on_user_selected_context_changed): Adjust
to use interp::interp_ui_out.
(tui_init): Rename to ...
(tui_interp::init): ... this. Remove the 'self' parameter, use
bool, return void and make extern. Adjust.
(tui_resume): Rename to ...
(tui_interp::resume): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(tui_suspend): Rename to ...
(tui_interp::suspend): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(tui_ui_out): Rename to ...
(tui_interp::interp_ui_out): ... this. Remove the 'self'
parameter, and make extern. Adjust.
(tui_exec): Rename to ...
(tui_interp::exec): ... this. Remove the 'data' parameter and
make extern.
(tui_interp_procs): Delete.
(tui_interp_factory): Use "new".
|
|
This patch gets rid of this hack in mi_set_logging:
/* The tee created already is based on gdb_stdout, which for MI
is a console and so we end up in an infinite loop of console
writing to ui_file writing to console etc. So discard the
existing tee (it hasn't been used yet, and MI won't ever use
it), and create one based on raw_stdout instead. */
By pushing down responsibility for the tee creation to the
interpreter. I.e., pushing the CLI bits out of handle_redirections
down to the CLI interpreter's set_logging_proc method.
This fixes a few leaks that I spotted, and then confirmed with
"valgrind --leak-check=full":
[...]
==21429== 56 (32 direct, 24 indirect) bytes in 1 blocks are definitely lost in loss record 30,243 of 34,980
==21429== at 0x4C29216: operator new(unsigned long) (vg_replace_malloc.c:334)
==21429== by 0x62D9A9: mi_set_logging(interp*, int, ui_file*, ui_file*) (mi-interp.c:1395)
==21429== by 0x810B8A: current_interp_set_logging(int, ui_file*, ui_file*) (interps.c:360)
==21429== by 0x61C537: handle_redirections(int) (cli-logging.c:162)
==21429== by 0x61C6EC: set_logging_on(char*, int) (cli-logging.c:190)
==21429== by 0x6163BE: do_cfunc(cmd_list_element*, char*, int) (cli-decode.c:105)
==21429== by 0x6193C1: cmd_func(cmd_list_element*, char*, int) (cli-decode.c:1913)
==21429== by 0x8DB790: execute_command(char*, int) (top.c:674)
==21429== by 0x632AE6: mi_execute_cli_command(char const*, int, char const*) (mi-main.c:2343)
==21429== by 0x6329BA: mi_cmd_execute(mi_parse*) (mi-main.c:2306)
==21429== by 0x631E19: captured_mi_execute_command(ui_out*, mi_parse*) (mi-main.c:1998)
==21429== by 0x632389: mi_execute_command(char const*, int) (mi-main.c:2163)
==21429==
[...]
==26635== 24 bytes in 1 blocks are definitely lost in loss record 20,740 of 34,995
==26635== at 0x4C29216: operator new(unsigned long) (vg_replace_malloc.c:334)
==26635== by 0x61C355: handle_redirections(int) (cli-logging.c:131)
==26635== by 0x61C6EC: set_logging_on(char*, int) (cli-logging.c:190)
==26635== by 0x6163BE: do_cfunc(cmd_list_element*, char*, int) (cli-decode.c:105)
==26635== by 0x6193C1: cmd_func(cmd_list_element*, char*, int) (cli-decode.c:1913)
==26635== by 0x8DB7BC: execute_command(char*, int) (top.c:674)
==26635== by 0x7B9132: command_handler(char*) (event-top.c:590)
==26635== by 0x7B94F7: command_line_handler(char*) (event-top.c:780)
==26635== by 0x7B8ABB: gdb_rl_callback_handler(char*) (event-top.c:213)
==26635== by 0x933CE9: rl_callback_read_char (callback.c:220)
==26635== by 0x7B89ED: gdb_rl_callback_read_char_wrapper_noexcept() (event-top.c:175)
==26635== by 0x7B8A49: gdb_rl_callback_read_char_wrapper(void*) (event-top.c:192)
One is fixed by transfering ownership of the log file to the tee. In
pseudo-patch, since the code was moved at the same time:
- out = new tee_file (curr_output, false, logfile.get (), false);
+ out = new tee_file (curr_output, false, logfile.get (), true);
The other is this bit in mi_set_logging:
else
{
+ delete mi->raw_stdout;
I tried to split the leak fixes to a smaller preparatory patch, but
that was difficult exactly because of the tee hack in
handle_redirections -> mi_set_logging.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (struct saved_output_files, saved_output):
Moved from cli/cli-logging.c.
(cli_set_logging): New function.
(cli_interp_procs): Install cli_set_logging.
* cli/cli-interp.h (make_logging_output, cli_set_logging):
Declare.
* cli/cli-logging.c (struct saved_output_files, saved_output):
Moved to cli/cli-interp.c.
(pop_output_files): Don't save outputs here.
(make_logging_output): New function.
(handle_redirections): Don't build tee nor save previous outputs
here.
* interps.c (current_interp_set_logging): Change prototype.
Assume there's always a set_logging_proc method installed.
* interps.h (interp_set_logging_ftype): Change prototype.
(current_interp_set_logging): Change prototype and adjust comment.
* mi/mi-interp.c (mi_set_logging): Change protototype. Adjust to
use make_logging_output.
* tui/tui-interp.c (tui_interp_procs): Install cli_set_logging.
|
|
This commit fixes a "-gdb-set logging redirect on" crash by not
handling "logging redirect on" on the fly.
Previous discussion here:
https://sourceware.org/ml/gdb-patches/2017-01/msg00467.html
Code for handling "logging redirect on" on the fly was added here:
https://sourceware.org/ml/gdb-patches/2010-08/msg00202.html
Meanwhile, MI gained support for logging, but flipping redirect "on"
on the fly was not considered. The result is that this sequence of
commands crashes GDB:
-gdb-set logging on
-gdb-set logging redirect on
Program received signal SIGSEGV, Segmentation fault.
0x00000000008dd7bc in gdb_flush (file=0x2a097f0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/ui-file.c:95
194 file->to_flush (file);
(top-gdb) bt
#0 0x00000000008dd7bc in gdb_flush(ui_file*) (file=0x2a097f0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/ui-file.c:95
#1 0x00000000007b5f34 in gdb_wait_for_event(int) (block=0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:752
#2 0x00000000007b52b6 in gdb_do_one_event() () at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:322
#3 0x00000000007b5362 in start_event_loop() () at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:371
#4 0x000000000082704a in captured_command_loop(void*) (data=0x0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:325
#5 0x00000000007b8d7c in catch_errors(int (*)(void*), void*, char*, return_mask) (func=0x827008 <captured_command_loop(void*)>, func_args=0x0, errstring=0x11dee51 "", mask=RETURN_MASK_ALL) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/exceptions.c:236
#6 0x000000000082839b in captured_main(void*) (data=0x7fffffffd820) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:1148
During symbol reading, cannot get low and high bounds for subprogram DIE at 24065.
#7 0x00000000008283c4 in gdb_main(captured_main_args*) (args=0x7fffffffd820) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:1158
#8 0x0000000000412d4d in main(int, char**) (argc=4, argv=0x7fffffffd928) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/gdb.c:32
The handling of redirect on the fly is not really a use case we need
to handle, IMO. Its inconsistent (other "set logging foo" commands
aren't handled on the fly), and complicates the code significantly.
Instead of complicating it further for MI, go back to the original
idea of warning, only:
https://sourceware.org/ml/gdb-patches/2010-08/msg00083.html
New test included.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* cli/cli-logging.c (maybe_warn_already_logging): New factored out
from ...
(set_logging_overwrite): ... here.
(logging_no_redirect_file): Delete.
(set_logging_redirect): Don't handle redirection on the fly.
Instead warn that "logging off" / "logging on" is necessary.
(pop_output_files): Delete references to logging_no_redirect_file.
(show_logging_command): Always speak in terms of what will happen
once logging is reenabled.
gdb/testsuite/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-logging.exp: Add "redirect while already logging"
tests.
|
|
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
|
|
The file_string parameter was added in 8f0eea0 (sorry, no title back
then) and has never actually been used.
gdb/ChangeLog:
* disasm.h (gdb_disassembly): Remove file_string parameter.
* disasm.c (gdb_disassembly): Likewise.
* cli/cli-cmds.c (print_disassembly): Adapt.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Likewise.
* stack.c (do_gdb_disassembly): Likewise.
|
|
gdb/ChangeLog:
* cli/cli-decode.c (lookup_cmd_1): Fix typo in comment.
|
|
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
|
|
All implementations of redirect/do_redirect in the ui_out subsystem
always return 0 (success). We can therefore clean it up and make them
return void.
gdb/ChangeLog:
* cli-out.c (cli_ui_out::do_redirect): Change return type to
void.
* cli-out.h (cli_ui_out::do_redirect): Likewise.
* mi/mi-out.c (mi_ui_out::do_redirect): Likewise.
* mi/mi-out.h (mi_ui_out::do_redirect): Likewise.
* ui-out.c (ui_out::redirect): Likewise.
* ui-out.h (ui_out::redirect, ui_out::do_redirect): Likewise.
* cli/cli-logging.c (set_logging_redirect): Update call site of
ui_out::redirect.
(handle_redirections): Likewise.
* scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* top.c (execute_command_to_string): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This patch finalizes the C++ conversion of the ui-out subsystem, by
turning the ui_out and ui_out_impl structures into a single class
hierarchy. ui_out functions are turned into virtual methods of that new
class, so as a result there are a lot of call sites to update.
In the previous version of the patchset, there were separate ui_out and
ui_out_impl classes, but it wasn't really useful and added boilerplate.
In this version there is simply an ui_out base class that is
extended for CLI, TUI and MI.
It's a bit hard to maintain a ChangeLog for such a big patch, I did my
best but I'm sure there are some missing or outdated info in there...
gdb/ChangeLog:
* ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header,
ui_out_table_body, ui_out_field_int, ui_out_field_fmt_int,
ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream,
ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text,
ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags,
ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect):
Remove, replace with a method in class ui_out.
(table_begin_ftype): Remove, replace with pure virtual method in
class ui_out.
(table_body_ftype): Likewise.
(table_end_ftype): Likewise.
(table_header_ftype): Likewise.
(ui_out_begin_ftype): Likewise.
(ui_out_end_ftype): Likewise.
(field_int_ftype): Likewise.
(field_skip_ftype): Likewise.
(field_string_ftype): Likewise.
(field_fmt_ftype): Likewise.
(spaces_ftype): Likewise.
(text_ftype): Likewise.
(message_ftype): Likewise.
(wrap_hint_ftype): Likewise.
(flush_ftype): Likewise.
(redirect_ftype): Likewise.
(data_destroy_ftype): Likewise.
(struct ui_out_impl): Remove, replace with class ui_out.
(ui_out_new): Remove.
(class ui_out): New class.
* ui-out.c (struct ui_out): Remove, replaced with class ui_out.
(current_level): Remove, replace with ui_out method.
(push_level): Likewise.
(pop_level): Likewise.
(uo_table_begin, uo_table_body, uo_table_end, uo_table_header,
uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt,
uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush,
uo_redirect, uo_field_string): Remove.
(ui_out_table_begin): Replace with ...
(ui_out::table_begin): ... this.
(ui_out_table_body): Replace with ...
(ui_out::table_body): ... this.
(ui_out_table_end): Replace with ...
(ui_out::table_end): ... this.
(ui_out_table_header): Replace with ...
(ui_out::table_header): ... this.
(ui_out_begin): Replace with ...
(ui_out::begin): ... this.
(ui_out_end): Replace with ...
(ui_out::end): ... this.
(ui_out_field_int): Replace with ...
(ui_out::field_int): ... this.
(ui_out_field_fmt_int): Replace with ...
(ui_out::field_fmt_int): ... this.
(ui_out_field_core_addr): Replace with ...
(ui_out::field_core_addr): ... this.
(ui_out_field_stream): Replace with ...
(ui_out::field_stream): ... this.
(ui_out_field_skip): Replace with ...
(ui_out::field_skip): ... this.
(ui_out_field_string): Replace with ...
(ui_out::field_string): ... this.
(ui_out_field_fmt): Replace with ...
(ui_out::field_fmt): ... this.
(ui_out_spaces): Replace with ...
(ui_out::spaces): ... this.
(ui_out_text): Replace with ...
(ui_out::text): ... this.
(ui_out_message): Replace with ...
(ui_out::message): ... this.
(ui_out_wrap_hint): Replace with ...
(ui_out::wrap_hint): ... this.
(ui_out_flush): Replace with ...
(ui_out::flush): ... this.
(ui_out_redirect): Replace with ...
(ui_out::redirect): ... this.
(ui_out_test_flags): Replace with ...
(ui_out::test_flags): ... this.
(ui_out_is_mi_like_p): Replace with ...
(ui_out::is_mi_like_p): ... this.
(verify_field): Replace with ...
(ui_out::verify_field): ... this.
(ui_out_query_field): Replace with ...
(ui_out::query_table_field): ... this.
(ui_out_data): Remove.
(ui_out_new): Remove, replace with ...
(ui_out::ui_out): ... this constructor.
(do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end,
do_cleanup_end, make_cleanup_ui_out_tuple_begin_end,
make_cleanup_ui_out_list_begin_end): Update fallouts of struct
ui_out -> class ui_out change.
* cli-out.c (cli_out_data): Remove.
(cli_uiout_dtor): Remove.
(cli_table_begin): Replace with ...
(cli_ui_out::do_table_begin): ... this new method.
(cli_table_body): Replace with ...
(cli_ui_out::do_table_body): ... this new method.
(cli_table_end): Replace with ...
(cli_ui_out::do_table_end): ... this new method.
(cli_table_header): Replace with ...
(cli_ui_out::do_table_header): ... this new method.
(cli_begin): Replace with ...
(cli_ui_out::do_begin): ... this new method.
(cli_end): Replace with ...
(cli_ui_out::do_end): ... this new method.
(cli_field_int): Replace with ...
(cli_ui_out::do_field_int): ... this new method.
(cli_field_skip): Replace with ...
(cli_ui_out::do_field_skip): ... this new method.
(cli_field_string): Replace with ...
(cli_ui_out::do_field_string): ... this new method.
(cli_field_fmt): Replace with ...
(cli_ui_out::do_field_fmt): ... this new method.
(cli_spaces): Replace with ...
(cli_ui_out::do_spaces): ... this new method.
(cli_text): Replace with ...
(cli_ui_out::do_text): ... this new method.
(cli_message): Replace with ...
(cli_ui_out::do_message): ... this new method.
(cli_wrap_hint): Replace with ...
(cli_ui_out::do_wrap_hint): ... this new method.
(cli_flush): Replace with ...
(cli_ui_out::do_flush): ... this new method.
(cli_redirect): Replace with ...
(cli_ui_out::do_redirect): ... this new method.
(out_field_fmt): Replace with ...
(cli_ui_out::out_field_fmt): ... this new method.
(field_separator): Replace with ...
(cli_ui_out::field_separator): ... this new method.
(cli_out_set_stream): Replace with ...
(cli_ui_out::set_stream): ... this new method.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_ui_out_impl::cli_ui_out_impl): New constructor.
(cli_ui_out_impl::~cli_ui_out_impl): New destructor.
(cli_out_new): Change return type to cli_ui_out *, instantiate a
cli_ui_out.
* cli-out.h (cli_ui_out_data): Remove, replace with class
cli_ui_out.
(class cli_ui_out): New class.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_out_new): Change return type to cli_ui_out*.
(cli_out_set_stream): Remove.
* cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type
to cli_ui_out*.
(cli_interpreter_resume): Adapt.
(cli_interpreter_exec): Adapt.
* mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove.
(mi_ui_out_impl): Remove.
(mi_table_begin): Replace with ...
(mi_ui_out::do_table_begin): ... this.
(mi_table_body): Replace with ...
(mi_ui_out::do_table_body): ... this.
(mi_table_end): Replace with ...
(mi_ui_out::do_table_end): ... this.
(mi_table_header): Replace with ...
(mi_ui_out::do_table_header): ... this.
(mi_begin): Replace with ...
(mi_ui_out::do_begin): ... this.
(mi_end): Replace with ...
(mi_ui_out::do_end): ... this.
(mi_field_int): Replace with ...
(mi_ui_out::do_field_int): ... this.
(mi_field_skip): Replace with ...
(mi_ui_out::do_field_skip): ... this.
(mi_field_string): Replace with ...
(mi_ui_out::do_field_string): ... this.
(mi_field_fmt): Replace with ...
(mi_ui_out::do_field_fmt): ... this.
(mi_spaces): Replace with ...
(mi_ui_out::do_spaces): ... this.
(mi_text): Replace with ...
(mi_ui_out::do_text): ... this.
(mi_message): Replace with ...
(mi_ui_out::do_message): ... this.
(mi_wrap_hint): Replace with ...
(mi_ui_out::do_wrap_hint): ... this.
(mi_flush): Replace with ...
(mi_ui_out::do_flush): ... this.
(mi_redirect): Replace with ...
(mi_ui_out::do_redirect):
(field_separator): Replace with ...
(mi_ui_out::field_separator):
(mi_open): Replace with ...
(mi_ui_out::open): ... this.
(mi_close): Replace with ...
(mi_ui_out::close): ... this.
(mi_out_rewind): Replace with ...
(mi_ui_out::rewind): ... this.
(mi_out_put): Replace with ...
(mi_ui_out::put): ... this.
(mi_version): Replace with ...
(mi_ui_out::version): ... this.
(mi_out_data_ctor): Replace with ...
(mi_ui_out::mi_ui_out): ... this.
(mi_out_data_dtor): Replace with ...
(mi_ui_out::~mi_ui_out): ... this.
(mi_out_new): Change return type to mi_ui_out*, instantiate
an mi_ui_out object.
(as_mi_ui_out): New function.
(mi_version): Update fallouts of struct ui_out to class ui_out
transition.
(mi_out_put): Likewise.
(mi_out_rewind): Likewise.
* mi/mi-out.h (mi_out_new): Change return type to mi_ui_out*.
* tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl):
Remove.
(tui_field_int): Replace with ...
(tui_ui_out::do_field_int): ... this.
(tui_field_string): Replace with ...
(tui_ui_out::do_field_string): ... this.
(tui_field_fmt): Replace with ...
(tui_ui_out::do_field_fmt): ... this.
(tui_text): Replace with ...
(tui_ui_out::do_text): ... this.
(tui_out_new): Change return type to tui_ui_out*, instantiate
tui_ui_out object.
(tui_ui_out::tui_ui_out): New.
* tui/tui-out.h: New file.
* tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h.
* tui/tui-io.c: Include tui/tui-out.h.
(tui_old_uiout): Change type to cli_ui_out*.
(tui_setup_io): Use dynamic_cast.
* tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out*.
* tui/tui-interp.c (tui_resume): Adapt.
* ada-lang.c (print_it_exception): Update fallouts of struct
ui_out to class ui_out transition.
(print_one_exception): Likewise.
(print_mention_exception): Likewise.
* ada-tasks.c (print_ada_task_info): Likewise.
(info_task): Likewise.
(task_command): Likewise.
* auto-load.c (print_script): Likewise.
(auto_load_info_scripts): Likewise.
(info_auto_load_cmd): Likewise.
* break-catch-sig.c (signal_catchpoint_print_one): Likewise.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
(print_one_exception_catchpoint): Likewise.
(print_one_detail_exception_catchpoint): Likewise.
(print_mention_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise.
(print_solib_event): Likewise.
(watchpoint_check): Likewise.
(wrap_indent_at_field): Likewise.
(print_breakpoint_location): Likewise.
(output_thread_groups): Likewise.
(print_one_breakpoint_location): Likewise.
(breakpoint_1): Likewise.
(default_collect_info): Likewise.
(watchpoints_info): Likewise.
(print_it_catch_fork): Likewise.
(print_one_catch_fork): Likewise.
(print_it_catch_vfork): Likewise.
(print_one_catch_vfork): Likewise.
(print_it_catch_solib): Likewise.
(print_one_catch_solib): Likewise.
(print_it_catch_exec): Likewise.
(print_one_catch_exec): Likewise.
(mention): Likewise.
(print_it_ranged_breakpoint): Likewise.
(print_one_ranged_breakpoint): Likewise.
(print_one_detail_ranged_breakpoint): Likewise.
(print_mention_ranged_breakpoint): Likewise.
(print_it_watchpoint): Likewise.
(print_mention_watchpoint): Likewise.
(print_it_masked_watchpoint): Likewise.
(print_one_detail_masked_watchpoint): Likewise.
(print_mention_masked_watchpoint): Likewise.
(bkpt_print_it): Likewise.
(tracepoint_print_one_detail): Likewise.
(tracepoint_print_mention): Likewise.
(update_static_tracepoint): Likewise.
(tracepoints_info): Likewise.
(save_breakpoints): Likewise.
* cli/cli-cmds.c (complete_command): Likewise.
* cli/cli-logging.c (set_logging_redirect): Likewise.
(pop_output_files): Likewise.
(handle_redirections): Likewise.
* cli/cli-script.c (print_command_lines): Likewise.
* cli/cli-setshow.c (do_show_command): Likewise.
(cmd_show_list): Likewise.
* cp-abi.c (list_cp_abis): Likewise.
(show_cp_abi_cmd): Likewise.
* darwin-nat-info.c (darwin_debug_regions_recurse): Likewise.
* disasm.c (gdb_pretty_print_insn): Likewise.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
* gdb_bfd.c (print_one_bfd): Likewise.
(maintenance_info_bfds): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise.
* i386-tdep.c (i386_mpx_print_bounds): Likewise.
* infcmd.c (run_command_1): Likewise.
(print_return_value_1): Likewise.
* inferior.c (print_selected_inferior): Likewise.
(print_inferior): Likewise.
* infrun.c (print_end_stepping_range_reason): Likewise.
(print_signal_exited_reason): Likewise.
(print_exited_reason): Likewise.
(print_signal_received_reason): Likewise.
(print_no_history_reason): Likewise.
* interps.c (interp_set): Likewise.
* linespec.c (decode_line_full): Likewise.
* linux-thread-db.c (info_auto_load_libthread_db): Likewise.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise.
(mi_cmd_env_path): Likewise.
(mi_cmd_env_dir): Likewise.
(mi_cmd_inferior_tty_show): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise.
(print_partial_file_name): Likewise.
(mi_cmd_file_list_exec_source_files): Likewise.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise.
(mi_cmd_info_gdb_mi_command): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise.
(mi_cmd_stack_list_args): Likewise.
(list_arg_or_local): Likewise.
* mi/mi-cmd-var.c (print_varobj): Likewise.
(mi_cmd_var_create): Likewise.
(mi_cmd_var_delete): Likewise.
(mi_cmd_var_set_format): Likewise.
(mi_cmd_var_show_format): Likewise.
(mi_cmd_var_info_num_children): Likewise.
(mi_cmd_var_list_children): Likewise.
(mi_cmd_var_info_type): Likewise.
(mi_cmd_var_info_path_expression): Likewise.
(mi_cmd_var_info_expression): Likewise.
(mi_cmd_var_show_attributes): Likewise.
(mi_cmd_var_evaluate_expression): Likewise.
(mi_cmd_var_assign): Likewise.
(varobj_update_one): Likewise.
* mi/mi-interp.c (as_mi_interp): Likewise.
(mi_on_normal_stop_1): Likewise.
(mi_tsv_modified): Likewise.
(mi_breakpoint_created): Likewise.
(mi_breakpoint_modified): Likewise.
(mi_solib_loaded): Likewise.
(mi_solib_unloaded): Likewise.
(mi_command_param_changed): Likewise.
(mi_memory_changed): Likewise.
(mi_user_selected_context_changed): Likewise.
* mi/mi-main.c (print_one_inferior): Likewise.
(output_cores): Likewise.
(list_available_thread_groups): Likewise.
(mi_cmd_data_list_register_names): Likewise.
(mi_cmd_data_list_changed_registers): Likewise.
(output_register): Likewise.
(mi_cmd_data_evaluate_expression): Likewise.
(mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_list_features): Likewise.
(mi_cmd_list_target_features): Likewise.
(mi_cmd_add_inferior): Likewise.
(mi_execute_command): Likewise.
(mi_load_progress): Likewise.
(print_variable_or_computed): Likewise.
(mi_cmd_trace_frame_collected): Likewise.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise.
* osdata.c (info_osdata_command): Likewise.
* probe.c (gen_ui_out_table_header_info): Likewise.
(print_ui_out_not_applicables): Likewise.
(print_ui_out_info): Likewise.
(info_probes_for_ops): Likewise.
(enable_probes_command): Likewise.
(disable_probes_command): Likewise.
* progspace.c (print_program_space): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
* python/py-framefilter.c (py_print_type): Likewise.
(py_print_value): Likewise.
(py_print_single_arg): Likewise.
(enumerate_args): Likewise.
(enumerate_locals): Likewise.
(py_print_args): Likewise.
(py_print_frame): Likewise.
* record-btrace.c (btrace_ui_out_decode_error): Likewise.
(btrace_call_history_insn_range): Likewise.
(btrace_call_history_src_line): Likewise.
(btrace_call_history): Likewise.
* remote.c (show_remote_cmd): Likewise.
* skip.c (skip_info): Likewise.
* solib.c (info_sharedlibrary_command): Likewise.
* source.c (print_source_lines_base): Likewise.
* spu-tdep.c (info_spu_event_command): Likewise.
(info_spu_signal_command): Likewise.
(info_spu_mailbox_list): Likewise.
(info_spu_dma_cmdlist): Likewise.
(info_spu_dma_command): Likewise.
(info_spu_proxydma_command): Likewise.
* stack.c (print_stack_frame): Likewise.
(print_frame_arg): Likewise.
(read_frame_arg): Likewise.
(print_frame_args): Likewise.
(print_frame_info): Likewise.
(print_frame): Likewise.
* symfile.c (load_progress): Likewise.
(generic_load): Likewise.
(print_transfer_performance): Likewise.
* thread.c (do_captured_list_thread_ids): Likewise.
(print_thread_info_1): Likewise.
(restore_selected_frame): Likewise.
(do_captured_thread_select): Likewise.
(print_selected_thread_frame): Likewise.
* top.c (execute_command_to_string): Likewise.
* tracepoint.c (tvariables_info_1): Likewise.
(trace_status_mi): Likewise.
(tfind_1): Likewise.
(print_one_static_tracepoint_marker): Likewise.
(info_static_tracepoint_markers_command): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
(fputs_maybe_filtered): Likewise.
|
|
New in v2:
- A few adjustments / simplifications were possible now that we
require C++11:
. Use std::unique_ptr to make the user_args_stack std::vector own
its elements:
static std::vector<std::unique_ptr<user_args>> user_args_stack;
. use vector::emplace_back to construct elements directly in the
corresponding vectors.
. use std::to_string instead of adding a gdb::to_string
replacement.
- Now includes a test.
Docs/NEWS are unchanged from v1 and have already been approved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I recently wrote a user-defined command that could benefit from
supporting an unlimited number of arguments:
http://palves.net/list-active-signal-handlers-with-gdb/
E.g., 'info signal-dispositions 1 2 3 4 5 6 7 8 9 10 11'
However, we currently only support up to 10 arguments passed to
user-defined commands ($arg0..$arg9).
I can't find a good reason for that, other than "old code with hard
coded limits". This patch removes that limit and modernizes the code
along the way:
- Makes the user_args struct a real C++ class that uses std::vector
for storage.
- Removes the "next" pointer from within user_args and uses a
std::vector to maintain a stack instead.
- Adds a new RAII-based scoped_user_args_level class to help
push/pop user args in the stack instead of using a cleanup.
gdb/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* NEWS: Mention that user commands now accept an unlimited number
of arguments.
* cli/cli-script.c: Include <vector>.
(struct string_view): New type.
(MAXUSERARGS): Delete.
(struct user_args): Now a C++ class.
(user_args_stack): New.
(struct scoped_user_args_level): New type.
(execute_user_command): Use scoped_user_args_level.
(arg_cleanup): Delete.
(setup_user_args): Deleted, and refactored as ...
(user_args::user_args): ... this new constructor. Limit of number
of arguments removed.
(insert_user_defined_cmd_args): Defer to user_args_stack.
(user_args::insert_args): New, bits based on old
insert_user_defined_cmd_args with limit of number of arguments
eliminated.
gdb/doc/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (User-defined Commands): Limit on number of
arguments passed to user-defined commands removed; update.
gdb/testsuite/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* gdb.base/commands.exp (user_defined_command_manyargs_test): New
procedure.
(top level): Call it.
|
|
It'd be handy to be able to iterate over command arguments in
user-defined commands, in order to support optional arguments
($arg0..$argN).
I thought I could make it work with "eval", but alas, it doesn't work
currently. E.g., with:
define test
set $i = 0
while $i < $argc
eval "print $arg%d", $i
set $i = $i + 1
end
end
we get:
(gdb) test 1
$1 = void
(gdb) test 1 2 3
$2 = void
$3 = void
$4 = void
(gdb)
The problem is that "eval" doesn't do user-defined command arguments
substitution after expanding its own argument. This patch fixes that,
which makes the example above work:
(gdb) test 1
$1 = 1
(gdb) test 1 2 3
$2 = 1
$3 = 2
$4 = 3
(gdb)
New test included, similar the above, but also exercises expanding
$argc.
I think this is likely to simplify many scripts out there, so I'm
adding an example to the manual and mentioning it in NEWS as well.
gdb/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* NEWS: Mention "eval" expands user-defined command arguments.
* cli/cli-script.c (execute_control_command): Adjust to rename.
(insert_args): Rename to ...
(insert_user_defined_cmd_args): ... this, and make extern.
* cli/cli-script.h (insert_user_defined_cmd_args): New
declaration.
* printcmd.c: Include "cli/cli-script.h".
(eval_command): Call insert_user_defined_cmd_args.
gdb/doc/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* gdb.texinfo (Define): Add example of using "eval" to process a
variable number of arguments.
(Output) <eval>: Add anchor.
gdb/testsuite/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* gdb.base/commands.exp (user_defined_command_args_eval): New
procedure.
(top level): Call it.
|
|
Now that we require C++11, use std::unique_ptr and std::move directly.
gdb/ChangeLog:
2016-11-15 Pedro Alves <palves@redhat.com>
* ada-lang.c (create_excep_cond_exprs): Use std::move instead of
gdb::move.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use
std::unique_ptr instead of gdb::unique_ptr.
* breakpoint.c (watch_command_1): Use std::move instead of
gdb::move.
* cli/cli-dump.c (dump_memory_to_file, restore_binary_file): Use
std::unique_ptr instead of gdb::unique_ptr.
* dtrace-probe.c (dtrace_process_dof_probe): Use std::move instead
of gdb::move.
* elfread.c (elf_read_minimal_symbols): Use std::unique_ptr
instead of gdb::unique_ptr.
* mi/mi-main.c (mi_cmd_data_read_memory): Use std::unique_ptr
instead of gdb::unique_ptr.
* parse.c (parse_expression_for_completion): Use std::move instead
of gdb::move.
* printcmd.c (display_command): std::move instead of gdb::move.
|
|
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* cli/cli-setshow.c (do_show_command): Adjust to use
ui_file_as_string and std::string.
|
|
This patch makes parse_expression and friends return a unique_ptr
instead of raw pointer [1]:
typedef gdb::unique_malloc_ptr<expression> expression_up;
and then adjusts the codebase throughout to stop using cleanups to
manage lifetime of expression pointers.
Whenever I found a structure owning an expression pointer, I made it
store a unique_ptr instead of a raw pointer, which then requires using
new/delete of the holding structure, instead of XNEW/xfree.
[1] - I'd like to set the rule that types named with an "_up" suffix
are unique_ptr typedefs.
Note I used gdb::unique_xmalloc_ptr instead of gdb::unique_ptr, simply
because we still use xmalloc instead of new to allocate expression
objects. Once that's changed, all we need to do is change the
expression_up typedef and the smart pointer will then call delete
instead of xfree.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_read_renaming_var_value): Use expression_up.
(struct ada_catchpoint_location) <excep_cond_expr>: Now an
expression_up.
(ada_catchpoint_location_dtor): Reset excep_cond_expr instead of
using xfree.
(create_excep_cond_exprs): Use expression_up and gdb::move.
(allocate_location_exception): Use new instead of XNEW.
(should_stop_exception): Likewise. Adjust to use expression_up.
(create_ada_exception_catchpoint): Use new instead of XNEW.
* ax-gdb.c (agent_eval_command_one): Use expression_up instead of
cleanups.
(maint_agent_printf_command): Use expression_up.
* break-catch-sig.c (create_signal_catchpoint): Use new instead of
XNEW.
* break-catch-syscall.c (create_syscall_event_catchpoint):
Likewise.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use new instead
of XCNEW. Use gdb::unique_ptr instead of cleanups.
* breakpoint.c (set_breakpoint_condition, update_watchpoint)
(parse_cmd_to_aexpr, watchpoint_check)
(bpstat_check_breakpoint_conditions, watchpoint_locations_match):
Adjust to use expression_up.
(init_bp_location): Adjust.
(free_bp_location): Use delete instead of xfree.
(set_raw_breakpoint_without_location, set_raw_breakpoint)
(add_solib_catchpoint, create_fork_vfork_event_catchpoint)
(new_single_step_breakpoint, create_breakpoint_sal): Use new
instead of XNEW.
(find_condition_and_thread): Adjust to use expression_up.
(create_breakpoint): Use new instead of XNEW.
(dtor_watchpoint): Don't xfree expression pointers, they're
unique_ptr's now.
(insert_watchpoint, remove_watchpoint): Adjust.
(watch_command_1): Use expression_up. Use new instead of XCNEW.
(catch_exec_command_1): Use new instead of XNEW.
(bp_location_dtor): Don't xfree expression pointers, they're
unique_ptr's now.
(base_breakpoint_allocate_location)
(strace_marker_create_breakpoints_sal): Use new instead of XNEW.
(delete_breakpoint): Use delete instead of xfree.
* breakpoint.h (struct bp_location) <cond>: Now an
unique_ptr<expression> instead of a raw pointer.
(struct watchpoint) <exp, cond_exp>: Likewise.
* cli/cli-script.c (execute_control_command): Use expression_up
instead of cleanups.
* dtrace-probe.c (dtrace_process_dof_probe): Use expression_up.
* eval.c (parse_and_eval_address, parse_and_eval_long)
(parse_and_eval, parse_to_comma_and_eval, parse_and_eval_type):
Use expression_up instead of cleanups.
* expression.h (expression_up): New typedef.
(parse_expression, parse_expression_with_language, parse_exp_1):
Change return type to expression_up.
* mi/mi-main.c (mi_cmd_data_evaluate_expression)
(print_variable_or_computed): Use expression_up.
* objc-lang.c (print_object_command): Use expression_up instead of
cleanups.
* parse.c (parse_exp_1, parse_exp_in_context)
(parse_exp_in_context_1, parse_expression)
(parse_expression_with_language): Return an expression_up instead
of a raw pointer.
(parse_expression_for_completion): Use expression_up.
* printcmd.c (struct display) <exp>: Now an expression_up instead
of a raw pointer.
(print_command_1, output_command_const, set_command, x_command):
Use expression_up instead of cleanups.
(display_command): Likewise. Use new instead of XNEW.
(free_display): Use delete instead of xfree.
(do_one_display): Adjust to use expression_up.
* remote.c (remote_download_tracepoint): Likewise.
* stack.c (return_command): Likewise.
* tracepoint.c (validate_actionline, encode_actions_1): Use
expression_up instead of cleanups.
* typeprint.c (whatis_exp, maintenance_print_type): Likewise.
* value.c (init_if_undefined_command): Likewise.
* varobj.c (struct varobj_root) <exp>: Now an expression_up
instead of a raw pointer.
(varobj_create): Adjust.
(varobj_set_value): Use an expression_up instead of cleanups.
(new_root_variable): Use new instead of XNEW.
(free_variable): Use delete instead of xfree.
(value_of_root_1): Use std::swap.
|
|
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (execute_control_command): Use std::string
instead of cleanups.
(locate_arg): Constify return type.
(insert_args): Constify paremeter. Simplify using std::string.
Return a std::string.
|
|
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (execute_control_command): Assume insert_args
never returns NULL.
(insert_args): Assume xmalloc never returns NULL.
|
|
This replaces a couple of uses of xmalloc with gdb::unique_ptr, also
removing a couple of cleanups.
2016-10-21 Tom Tromey <tom@tromey.com>
* cli/cli-dump.c (dump_memory_to_file): Use gdb::unique_ptr.
(restore_binary_file): Likewise.
|
|
This removes make_cleanup_restore_current_ui by converting the last
use. The last use was in a few functions used to iterate over all
UIs. This patch replaces these functions with a class, and arranges
for the class destructor to do the needed cleanup.
2016-10-21 Tom Tromey <tom@tromey.com>
* tui/tui-interp.c (tui_on_normal_stop, tui_on_signal_received)
(tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
(tui_on_no_history, tui_on_user_selected_context_changed):
Update.
* top.h (switch_thru_all_uis): New class.
(SWITCH_THRU_ALL_UIS): Rewrite.
(make_cleanup_restore_current_ui, switch_thru_all_uis_init)
(switch_thru_all_uis_cond, switch_thru_all_uis_next): Don't
declare.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_record_changed, mi_inferior_added, mi_inferior_appeared)
(mi_inferior_exit, mi_inferior_removed, mi_on_signal_received)
(mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited)
(mi_on_no_history, mi_on_normal_stop, mi_traceframe_changed)
(mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
(mi_breakpoint_created, mi_breakpoint_deleted)
(mi_breakpoint_modified, mi_output_running_pid, mi_on_resume)
(mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
(mi_memory_changed, mi_user_selected_context_changed): Update.
* infrun.c (all_uis_check_sync_execution_done)
(all_uis_on_sync_execution_starting, normal_stop): Update.
* event-top.c (restore_ui_cleanup)
(make_cleanup_restore_current_ui, switch_thru_all_uis_init)
(switch_thru_all_uis_cond, switch_thru_all_uis_next): Remove.
* cli/cli-interp.c (cli_on_normal_stop, cli_on_signal_received)
(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
(cli_on_no_history, cli_on_user_selected_context_changed):
Update.
* breakpoint.c (watchpoint_check): Update.
|
|
This patch replaces many (but not all) uses of
make_cleanup_restore_integer with a simple RAII-based template class.
It also removes the similar restore_execution_direction cleanup in
favor of this new class. Subsequent patches will replace other
similar cleanups with this class.
The class is typically instantiated using make_scoped_restore. This
allows for template argument deduction.
2016-10-21 Tom Tromey <tom@tromey.com>
* common/scoped_restore.h: New file.
* utils.h: Include scoped_restore.h.
* top.c (execute_command_to_string): Use scoped_restore.
* python/python.c (python_interactive_command): Use
scoped_restore.
(python_command, execute_gdb_command): Likewise.
* printcmd.c (do_one_display): Use scoped_restore.
* mi/mi-main.c (exec_continue): Use scoped_restore.
* mi/mi-cmd-var.c (mi_cmd_var_assign): Use scoped_restore.
* linux-fork.c (checkpoint_command): Use scoped_restore.
* infrun.c (restore_execution_direction): Remove.
(fetch_inferior_event): Use scoped_restore.
* compile/compile.c (compile_file_command): Use
scoped_restore.
(compile_code_command, compile_print_command): Likewise.
* cli/cli-script.c (execute_user_command): Use
scoped_restore.
(while_command, if_command, script_from_file): Likewise.
* arm-tdep.c (arm_insert_single_step_breakpoint): Use
scoped_restore.
|
|
This converts tid_range_parser and get_number_or_range to be classes.
The various tid_range_parser_* and get_number_or_range_* functions
become methods on the respective classes. Then it updates the users
to follow.
The rationale for the change is that this provides better
encapsulation. For example, this forced me to think of a better
interface between tid_range_parser and get_number_or_range, since the
former peeked into the latter's internals a bit too much. That ended
up resulting mostly in these two not-just-straight-1-1 changes:
void
-tid_range_parser_skip (struct tid_range_parser *parser)
+tid_range_parser::skip_range ()
{
...
- tid_range_parser_init (parser, parser->range_parser.end_ptr,
- parser->default_inferior);
+ m_range_parser.skip_range ();
+ init (m_range_parser.string (), m_default_inferior);
}
and:
/* If we successfully parsed a thread number or finished parsing a
thread range, switch back to assuming the next TID is
inferior-qualified. */
- if (parser->range_parser.end_ptr == NULL
- || parser->range_parser.string == parser->range_parser.end_ptr)
+ if (!m_range_parser.in_range ())
{
For the same reason (encapsulation), this moves the enum
tid_range_state definition to within the tid_parser class's scope,
since that is private implementation detail.
While at it, switch to use "bool" for booleans.
gdb/ChangeLog:
2016-10-13 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* tid-parse.h (tid_range_parser): New class.
(enum tid_range_state): Move into tid_range_parser's scope.
Remove TID_RANGE_ prefix from all values.
(tid_range_parser_get_tid, tid_range_parser_get_tid_range)
(tid_range_parser_star_range, tid_range_parser_finished)
(tid_range_parser_skip, tid_range_parser_qualified): Don't
declare.
(tid_is_in_list): Update comment.
* tid-parse.c (tid_range_parser::tid_range_parser): New.
(init, finished, get_string, skip, tid_is_qualified)
(get_tid_or_range, get_tid_range, get_tid, star_range): Rename;
turn into methods.
(tid_is_in_list): Adjust.
* cli/cli-utils.h (number_or_range_parser): New class.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Don't declare.
* cli/cli-utils.c
(number_or_range_parser::number_or_range_parser): New.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Rename; turn into methods.
(number_is_in_list): Adjust.
* breakpoint.c (map_breakpoint_numbers): Adjust. Use bool.
(trace_pass_command, get_tracepoint_by_number): Adjust.
* breakpoint.h (get_tracepoint_by_number): Adjust.
* inferior.c (detach_inferior_command, kill_inferior_command)
(remove_inferior_command): Adjust.
* linespec.c (decode_line_2): Adjust.
* memattr.c (mem_enable_command, mem_disable_command)
(mem_delete_command): Adjust.
* printcmd.c (map_display_numbers): Adjust.
* reverse.c (delete_bookmark_command, bookmarks_info): Adjust.
* thread.c (thread_apply_command): Adjust.
|
|
With this patch, when an inferior, thread or frame is explicitly
selected by the user, notifications will appear on all CLI and MI UIs.
When a GDB console is integrated in a front-end, this allows the
front-end to follow a selection made by the user ont he CLI, and it
informs the user about selection changes made behind the scenes by the
front-end.
This patch addresses PR gdb/20487.
In order to communicate frame changes to the front-end, this patch adds
a new field to the =thread-selected event for the selected frame. The
idea is that since inferior/thread/frame can be seen as a composition,
it makes sense to send them together in the same event. The vision
would be to eventually send the inferior information as well, if we find
that it's needed, although the "=thread-selected" event would be
ill-named for that job.
Front-ends need to handle this new field if they want to follow the
frame selection changes that originate from the console. The format of
the frame attribute is the same as what is found in the *stopped events.
Here's a detailed example for each command and the events they generate:
thread
------
1. CLI command:
thread 1.3
MI event:
=thread-selected,id="3",frame={...}
2. MI command:
-thread-select 3
CLI event:
[Switching to thread 1.3 ...]
3. MI command (CLI-in-MI):
thread 1.3
MI event/reply:
&"thread 1.3\n"
~"#0 child_sub_function () ...
=thread-selected,id="3",frame={level="0",...}
^done
frame
-----
1. CLI command:
frame 1
MI event:
=thread-selected,id="3",frame={level="1",...}
2. MI command:
-stack-select-frame 1
CLI event:
#1 0x00000000004007f0 in child_function...
3. MI command (CLI-in-MI):
frame 1
MI event/reply:
&"frame 1\n"
~"#1 0x00000000004007f9 in ..."
=thread-selected,id="3",frame={level="1"...}
^done
inferior
--------
Inferior selection events only go from the console to MI, since there's
no way to select the inferior in pure MI.
1. CLI command:
inferior 2
MI event:
=thread-selected,id="3"
Note that if the user selects an inferior that is not started or exited,
the MI doesn't receive a notification. Since there is no threads to
select, the =thread-selected event does not apply...
2. MI command (CLI-in-MI):
inferior 2
MI event/reply:
&"inferior 2\n"
~"[Switching to inferior 2 ...]"
=thread-selected,id="4",frame={level="0"...}
^done
Internal implementation detail: this patch makes it possible to suppress
notifications caused by a CLI command, like what is done in mi-interp.c.
This means that it's now possible to use the
add_com_suppress_notification function to register a command with some
event suppressed. It is used to implement the select-frame command in
this patch.
The function command_notifies_uscc_observer was added to extract
the rather complicated logical expression from the if statement. It is
also now clearer what that logic does: if the command used by the user
already notifies the user_selected_context_changed observer, there is
not need to notify it again. It therefore protects again emitting the
event twice.
No regressions, tested on ubuntu 14.04 x86 with target boards unix and
native-extended-gdbserver.
gdb/ChangeLog:
YYYY-MM-DD Antoine Tremblay <antoine.tremblay@ericsson.com>
YYYY-MM-DD Simon Marchi <simon.marchi@ericsson.com>
PR gdb/20487
* NEWS: Mention new frame field of =thread-selected event.
* cli/cli-decode.c (add_cmd): Initialize c->suppress_notification.
(add_com_suppress_notification): New function definition.
(cmd_func): Set and restore the suppress_notification flag.
* cli/cli-deicode.h (struct cmd_list_element)
<suppress_notification>: New field.
* cli/cli-interp.c (cli_suppress_notification): New global variable.
(cli_on_user_selected_context_changed): New function.
(_initialize_cli_interp): Attach to user_selected_context_changed
observer.
* command.h (struct cli_suppress_notification): New structure.
(cli_suppress_notification): New global variable declaration.
(add_com_suppress_notification): New function declaration.
* defs.h (enum user_selected_what_flag): New enum.
(user_selected_what): New enum flag type.
* frame.h (print_stack_frame_to_uiout): New function declaration.
* gdbthread.h (print_selected_thread_frame): New function declaration.
* inferior.c (print_selected_inferior): New function definition.
(inferior_command): Remove printing of inferior/thread/frame switch
notifications, notify user_selected_context_changed observer.
* inferior.h (print_selected_inferior): New function declaration.
* mi/mi-cmds.c (struct mi_cmd): Add user_selected_context
suppression to stack-select-frame and thread-select commands.
* mi/mi-interp.c (struct mi_suppress_notification)
<user_selected_context>: Initialize.
(mi_user_selected_context_changed): New function definition.
(_initialize_mi_interp): Attach to user_selected_context_changed.
* mi/mi-main.c (mi_cmd_thread_select): Print thread selection reply.
(mi_execute_command): Handle notification suppression. Notify
user_selected_context_changed observer on thread change instead of printing
event directly. Don't send it if command already sends the notification.
(command_notifies_uscc_observer): New function.
(mi_cmd_execute): Don't handle notification suppression.
* mi/mi-main.h (struct mi_suppress_notification)
<user_selected_context>: New field.
* stack.c (print_stack_frame_to_uiout): New function definition.
(select_frame_command): Notify user_selected_context_changed
observer.
(frame_command): Call print_selected_thread_frame if there's no frame
change or notify user_selected_context_changed observer if there is.
(up_command): Notify user_selected_context_changed observer.
(down_command): Likewise.
(_initialize_stack): Suppress user_selected_context notification for
command select-frame.
* thread.c (thread_command): Notify
user_selected_context_changed if the thread has changed, print
thread info directly if it hasn't.
(do_captured_thread_select): Do not print thread switch event.
(print_selected_thread_frame): New function definition.
* tui/tui-interp.c (tui_on_user_selected_context_changed):
New function definition.
(_initialize_tui_interp): Attach to user_selected_context_changed
observer.
gdb/doc/ChangeLog:
PR gdb/20487
* gdb.texinfo (Context management): Update mention of frame
change notifications.
(gdb/mi Async Records): Document frame field in
=thread-select event.
* observer.texi (GDB Observers): New user_selected_context_changed
observer.
gdb/testsuite/ChangeLog:
PR gdb/20487
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Adapt
=thread-select-event check.
|
|
This patch changes some code in cli-cmds.c to use std::string rather
than dyn-string, removing some cleanups. Since this was the last use
of dyn-string in gdb, this patch also removes
make_cleanup_dyn_string_delete.
2016-09-23 Tom Tromey <tom@tromey.com>
* utils.h (make_cleanup_dyn_string_delete): Remove declaration.
* utils.c: Don't include dyn-string.h.
(do_dyn_string_delete, make_cleanup_dyn_string_delete): Remove.
* cli/cli-cmds.c: Include <string>. Don't include dyn-string.h.
(argv_to_string): Rename. Change return type to std::string.
(alias_command): Use std::string.
|
|
This fixes PR gdb/20604. The bug here is that passing an invalid
expression to "quit" -- e.g., "quit()" -- causes gdb to enter a
non-functioning state.
The immediate problem is that quit_force resets the terminal before
evaluating the expression. However, it seemed to me that it doesn't
really make sense to pass the quit_force argument to kill_or_detach
(which passes it to to_detach), first because conflating the exit
status for "quit" and the signal to pass when detaching doesn't make
sense, and second because to_detach implementations generally only
accept a constant here, while "quit" accepts an expression. So, I
removed that.
As an aside, I think the "detach SIGNO" functionality is not
documented.
Built and regtested on x86-64 Fedora 24.
2016-09-21 Tom Tromey <tom@tromey.com>
PR gdb/20604:
* top.h (quit_force): Update.
* top.c (quit_force): Changed type of first argument. Don't
evaluate expression. Pass NULL to kill_or_detach.
* cli/cli-cmds.c (quit_command): Evaluate "args".
2016-09-21 Tom Tromey <tom@tromey.com>
PR gdb/20604:
* gdb.base/quit.exp: New file.
|
|
Otherwise including <string> or some other C++ header is broken.
E.g.:
In file included from /opt/gcc/include/c++/7.0.0/bits/char_traits.h:39:0,
from /opt/gcc/include/c++/7.0.0/string:40,
from /home/pedro/gdb/mygit/cxx-convertion/src/gdb/infrun.c:68:
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
min(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:265:56: error: macro "max" passed 3 arguments, but takes just 2
max(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
In file included from .../src/gdb/infrun.c:21:0:
To the best of my grepping abilities, I believe I adjusted all min/max
calls.
gdb/ChangeLog:
2016-09-16 Pedro Alves <palves@redhat.com>
* defs.h (min, max): Delete.
* aarch64-tdep.c: Include <algorithm> and use std::min and
std::max throughout.
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64-windows-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* ctf.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* environ.c: Likewise.
* exec.c: Likewise.
* f-exp.y: Likewise.
* findcmd.c: Likewise.
* ft32-tdep.c: Likewise.
* gcore.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* linux-thread-db.c: Likewise.
* lm32-tdep.c: Likewise.
* m32r-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* memrange.c: Likewise.
* minidebug.c: Likewise.
* mips-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* nds32-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* parse.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* probe.c: Likewise.
* record-btrace.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* rx-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-linux-tdep.c: Likewise.
* ser-tcp.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* source.c: Likewise.
* sparc-tdep.c: Likewise.
* symfile.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* xtensa-tdep.c: Likewise.
* cli/cli-cmds.c: Likewise.
* compile/compile-object-load.c: Likewise.
|
|
This commit makes each UI have its own "stdin" stream pointer. This
is used to determine whether the "from_tty" argument to
execute_command, etc. should be true.
Related, this commit makes input_from_terminal_p take an UI parameter,
and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only
returns info on gdb's own main/primary terminal (the real stdin).
However, the places that call input_from_terminal_p really want to
know is whether the command came from an interactive tty. This patch
thus renames input_from_terminal_p to input_interactive_p for clarity,
and then makes input_interactive_p check for "set interactive" itself,
along with ISATTY, instead of calling gdb_has_a_terminal. Actually,
quit_force wants to call input_interactive_p _after_ stdin is closed,
we can't call ISATTY that late. So instead we save the result of
ISATTY in a field of the UI.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
(read_command_lines): Use input_interactive_p instead of
input_from_terminal_p.
* defs.h (struct ui): Forward declare.
(input_from_terminal_p): Rename to ...
(input_interactive_p): ... this.
* event-top.c (stdin_event_handler): Pass 0 as from_tty argument
to quit_command.
(command_handler): Adjust to per-UI stdin.
(handle_line_of_input): Adjust to per-UI stdin and use
input_interactive_p instead of ISATTY and input_from_terminal_p.
(gdb_readline_no_editing_callback): Adjust to per-UI stdin.
(command_line_handler): Always pass true as "from_tty" parameter
of handle_line_of_input and execute_command.
(async_sigterm_handler): Pass 0 as from_tty argument to
quit_command.
* inflow.c (interactive_mode, show_interactive_mode): Moved to ...
(gdb_has_a_terminal): Don't check interactive_mode here.
(_initialize_inflow): Don't install "set interactive-mode" here.
* main.c (captured_command_loop): Adjust to per-UI stdin.
* mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
stdin.
* top.c (new_ui): Save the stdin stream and whether it's a tty.
(dont_repeat): Adjust to per-UI stdin.
(command_line_input): Adjust to per-UI stdin and to use
input_interactive_p.
(quit_force): Write history if any UI supports interactive input.
(interactive_mode, show_interactive_mode): Move here, from
inflow.c.
(input_from_terminal_p): Rename to ...
(input_interactive_p): ... this, and check the "interactive_mode"
global instead of calling gdb_has_a_terminal.
(_initialize_top): Install "set interactive-mode" here.
* top.h (struct ui) <stdin_stream, input_interactive_p>: New
fields.
* utils.c (quit): Pass 0 as from_tty argument to quit_force.
(defaulted_query): Adjust to per-UI stdin and to use
input_interactive_p.
|
|
Currently when a "step", "next", etc. finishes, the current source
line is printed on all console UIs.
This patch makes the CLI and TUI interpreters reuse MI's logic to only
emit console output related to a synchronous command on the
console-like interpreter that started the command in the first place.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_on_normal_stop): Bail out early if there's
nothing to print. Use should_print_stop_to_console.
* tui/tui-interp.c (tui_on_normal_stop): Likewise.
|
|
I noticed that if we step into an inline function, step_1 never
reaches proceed, and thus nevers sets the thread's
tp->control.command_interp. Because of that,
should_print_stop_to_console fails to determine that is should print
stop output to the console.
The fix is to set the thread's command_interp earlier. However, I
realized that we can move that field to the thread_fsm, given that its
lifetime is exactly the same as thread_fsm. So the patch plumbs all
fsms constructors to take the command interp and store it in the
thread_fsm.
We can see the fix in action, with e.g., the gdb.opt/inline-cmds.exp
test, and issuing a step when stopped at line 67:
&"s\n"
^running
*running,thread-id="all"
(gdb)
~"67\t result = func2 ();\n"
*stopped,reason="end-stepping-range",frame={addr="0x00000000004004d0",func="main",args=[],file="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",line="67"},thread-id="1",stopped-threads="all",core="0"
(gdb)
s
&"s\n"
^running
*running,thread-id="all"
(gdb)
+ ~"func2 () at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c:67\n"
+ ~"67\t result = func2 ();\n"
*stopped,reason="end-stepping-range",frame={addr="0x00000000004004d0",func="func2",args=[],file="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",line="67"},thread-id="1",stopped-threads="all",core="0"
(gdb)
(The inline-cmds.exp command is adjusted to exercise this.)
(Due to the follow_fork change, this also fixes "next N" across a fork
with "set follow-fork child" with "set detach-on-fork on". Commands
that rely on internal breakpoints, like "finish" will still require
more work to migrate breakpoints etc. to the child thread.)
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* breakpoint.c (new_until_break_fsm): Add 'cmd_interp' parameter.
(until_break_fsm_should_stop, until_break_fsm_clean_up): Add
thread parameter.
(until_break_command): Pass command interpreter to thread fsm
ctor.
* cli/cli-interp.c (should_print_stop_to_console): Adjust.
* gdbthread.h (struct thread_control_state) <command_interp>:
Delete field.
* infcall.c (new_call_thread_fsm): Add 'cmd_interp' parameter.
Pass it down.
(call_thread_fsm_should_stop): Add thread parameter.
(call_function_by_hand_dummy): Pass command interpreter to thread
fsm ctor. Pass thread pointer to fsm clean up method.
* infcmd.c: Include interps.h.
(struct step_command_fsm) <thread>: Delete field.
(new_step_command_fsm): Add 'cmd_interp' parameter. Pass it down.
(step_command_fsm_prepare): Remove references to fsm's thread
field.
(step_1): Pass command interpreter to thread
fsm ctor. Pass thread pointer to fsm clean up method.
(step_command_fsm_should_stop, step_command_fsm_clean_up): Add
thread parameter and use it.
(new_until_next_fsm): Add 'cmd_interp' parameter. Pass it down.
(until_next_fsm_should_stop, until_next_fsm_clean_up): Add thread
parameter and use it.
(until_next_command): Pass command interpreter to thread fsm ctor.
(struct finish_command_fsm) <thread>: Delete field.
(finish_command_fsm_ops): Add NULL slot for should_notify_stop.
(new_finish_command_fsm): Add 'cmd_interp' parameter and pass it
down. Remove thread parameter and adjust.
(finish_command_fsm_should_stop, finish_command_fsm_clean_up): Add
thread parameter and use it.
(finish_command): Pass command interpreter to thread fsm ctor.
Don't pass thread.
* infrun.c (follow_fork): Move thread fsm to child fork instead of
command interpreter, only.
(clear_proceed_status_thread): Remove reference to command_interp.
(proceed): Don't record the thread's command interpreter.
(clean_up_just_stopped_threads_fsms): Pass thread to fsm clean_up
method.
(fetch_inferior_event): Pass thread to fsm should_stop method.
* thread-fsm.c (thread_fsm_ctor): Add 'cmd_interp' parameter.
Store it.
(thread_fsm_clean_up, thread_fsm_should_stop): Add thread
parameter and pass it down.
* thread-fsm.h (struct thread_fsm) <command_interp>: New field.
(struct thread_fsm_ops) <clean_up, should_stop>: Add thread
parameter.
(thread_fsm_ctor): Add 'cmd_interp' parameter.
(thread_fsm_clean_up, thread_fsm_should_stop): Add thread
parameter.
* thread.c (thread_cancel_execution_command): Pass thread to
thread fsm clean_up method.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.opt/inline-cmds.c: Add "set mi break here" marker.
* gdb.opt/inline-cmds.exp: Add MI tests.
|
