| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
This commit adds a completer for the "pipe" command. It can complete
"pipe"'s options, and the specified GDB command.
To make the completer aware of the "-d" option, this converts the
option processing to use gdb::option.
Tests included.
gdb/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
PR cli/24732
* cli/cli-cmds.c (struct pipe_cmd_opts): New.
(pipe_cmd_option_defs): New.
(make_pipe_cmd_options_def_group): New.
(pipe_command): Use gdb::option::process_options.
(pipe_command_completer): New function.
(_initialize_cli_cmds): Install completer for "pipe" command.
gdb/testsuite/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
PR cli/24732
* gdb.base/shell.exp: Load completion-support.exp.
Adjust expected error output. Add completion tests.
|
|
A following patch will make the "pipe" command use the gdb::option
framework for option processing. However, "pipe"'s only option today
is a string option, "-d DELIM", and gdb::option does not support
string options yet.
This commit adds support for string options, mapped to var_string.
For now, a string is parsed up until the first whitespace. I imagine
that we'll need to add support for quoting so that we could do:
(gdb) cmd -option 'some -string'
without gdb confusing the "-string" for an option.
This doesn't seem important for pipe, so I'm leaving it for another
day.
One thing I'm not happy with, is that the string data is managed as a
raw malloc-allocated char *, which means that we need to xfree it
manually. This is because var_string settings work that way too.
Although with var_string settings we're leaking the strings at gdb
exit, that was never really a problem. For options though, leaking is
undesirable.
I think we should tackle that for both settings and options at the
same time, so for now I'm just managing the malloced data manually.
It's a bit ugly in option_def_and_value, but at least that's hidden
from view.
For testing, this adds a new "-string" option to "maint
test-settings", and then tweaks gdb.base/options.exp to exercise it.
gdb/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
* cli/cli-option.c (union option_value) <string>: New field.
(struct option_def_and_value): Add ctor, move ctor, dtor and
use DISABLE_COPY_AND_ASSIGN.
(option_def_and_value::clear_value): New.
(parse_option, save_option_value_in_ctx, get_val_type_str)
(add_setshow_cmds_for_options): Handle var_string.
* cli-option.h (union option_def::var_address) <string>: New
field.
(struct string_option_def): New.
* maint-test-options.c (struct test_options_opts): Add default
ctor and use DISABLE_COPY_AND_ASSIGN.
<string_opt>: New field.
(test_options_opts::~test_options_opts): New.
(test_options_opts::dump): Also dump "-string".
(test_options_option_defs): Install "string.
gdb/testsuite/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
* gdb.base/options.exp (expect_none, expect_flag, expect_bool)
(expect_integer): Adjust to expect "-string".
(expect_string): New.
(all_options): Expect "-string".
(test-flag, test-boolean): Adjust to expect "-string".
(test-string): New proc.
(top level): Call it.
|
|
Currently, gdb::option::complete_options just discards any processed
option argument, because no completer needs that data.
When completing "pipe -d XXX gdbcmd XXX" however, the completer needs
to know about -d's argument (XXX), in order to know where input is
already past the gdb command and the delimiter.
In this commit, the fix for that is the factoring out of the
save_option_value_in_ctx function and calling it in complete_options.
For testing, this makes "maint show test-options-completion-result"
show the processed options too, like what the "maint test-options"
subcommands output when run. Then, of course, gdb.base/options.exp is
adjusted.
Doing this exposed a couple latent bugs, which is what the other gdb
changes in the patch are for:
- in the var_enum case, without the change, we'd end up with a null
enum argument, and print:
"-enum (null)"
- The get_ulongest change is necessary to avoid advancing PP in a
case where we end up throwing an error, e.g., when parsing "11x".
Without the change the operand pointer shown by "maint show
test-options-completion-result" would be left pointing at "x"
instead of "11x".
gdb/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
* cli/cli-option.c (parse_option) <var_enum>: Don't return an
option_value with a null enumeration.
(complete_options): Save the option values in the context.
(save_option_value_in_ctx): New, factored out from ...
(process_options): ... here.
* cli/cli-utils.c (get_ulongest): Don't advance PP until the end
of the function.
* maint-test-options.c (test_options_opts::dump): New, factored
out from ...
(maintenance_test_options_command_mode): ... here.
(maintenance_test_options_command_completion_result): Delete.
(maintenance_test_options_command_completion_text): Update
comment.
(maintenance_show_test_options_completion_result): Change
prototype. Just print
maintenance_test_options_command_completion_text.
(save_completion_result): New.
(maintenance_test_options_completer_mode): Pass options context to
complete_options, and then save a dump.
(_initialize_maint_test_options): Use add_cmd to install "maint
show test-options-completion-result".
gdb/testsuite/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
* gdb.base/options.exp (test-misc, test-flag, test-boolean)
(test-uinteger, test-enum): Adjust res_test_gdb_... calls to pass
the expected output in the success.
|
|
( See original discussion and prototype here:
https://sourceware.org/ml/gdb-patches/2019-05/msg00570.html )
(gdb) help with
Temporarily set SETTING to VALUE, run COMMAND, and restore SETTING.
Usage: with SETTING [VALUE] [-- COMMAND]
Usage: w SETTING [VALUE] [-- COMMAND]
With no COMMAND, repeats the last executed command.
SETTING is any setting you can change with the "set" subcommands.
E.g.:
with language pascal -- print obj
with print elements unlimited -- print obj
As can be seen above, the "with" command is just like "set", but
instead of setting the setting permanently, it sets the setting, runs
a command and then restores the setting.
(gdb) p g_s
$1 = {a = 1, b = 2, c = 3}
(gdb) with language ada -- print g_s
$2 = (a => 1, b => 2, c => 3)
Warning: the current language does not match this frame.
(gdb) show language
The current source language is "auto; currently c".
(gdb) with print elements 100 -- with print object on -- print 1
$3 = 1
You can shorten things a bit though, as long as unambiguous. So this:
(gdb) with print elements 100 -- with print object off -- print 1
is the same as:
(gdb) w p el 100 -- w p o 0 -- p 1
Note that the patch adds a "w" alias for "with", as "w" is not
currently taken:
(gdb) w
Ambiguous command "w": watch, wh, whatis, where, while, while-stepping, winheight, ws.
Let me know if you'd prefer to reserve "w" for one of the other
commands above. IMHO, this command will end up being used frequently
enough that it deserves the "w" shorthand.
A nice feature is that this is fully integrated with TAB-completion:
(gdb) with p[TAB]
pagination print prompt python
(gdb) with print [TAB]
address max-depth static-members
array max-symbolic-offset symbol
array-indexes null-stop symbol-filename
asm-demangle object symbol-loading
demangle pascal_static-members thread-events
elements pretty type
entry-values raw union
frame-arguments repeats vtbl
inferior-events sevenbit-strings
(gdb) with print [TAB]
(gdb) with print elements unlimited -- thread apply all -[TAB]
-ascending -c -q -s
(gdb) with print elements unlimited -- print -[TAB]
-address -max-depth -repeats -vtbl
-array -null-stop -static-members
-array-indexes -object -symbol
-elements -pretty -union
The main advantage of this new command compared to command options,
like the new "print -OPT", is that this command works with any
setting, and, it works nicely when you want to override a setting
while running a user-defined command, like:
(gdb) with print pretty -- usercmd
The disadvantage is that it isn't as compact or easy to type. I think
of command options and this command as complementary. I think that
even with this new command, it makes sense to continue developing the
command options in the direction of exposing most-oft-used settings as
command options.
Inspired by Philippe's "/" command proposal, if no command is
specified, then the last command is re-invoked, under the overridden
setting:
(gdb) p g_s
$1 = {a = 1, b = 2, c = 3}
(gdb) with language ada
$2 = (a => 1, b => 2, c => 3)
Warning: the current language does not match this frame.
Note: "with" requires "--" to separate the setting from the command.
It might be possible to do without that, but, I haven't tried it yet,
and I think that this can go in without it. We can always downgrade
to making "--" optional if we manage to make it work.
On to the patch itself, the implementation of the command is simpler
than one might expect. A few details:
- I factored out a bit from pipe_command into repeat_previous
directly, because otherwise I'd need to copy&paste the same code and
same error message in the with command.
- The parse_cli_var_uinteger / parse_cli_var_zuinteger_unlimited /
do_set_command changes are necessary since we can now pass an empty
string as argument.
- do_show_command was split in two, as a FIXME comment suggests, but
for a different reason: we need to get a string version of a "set"
command's value, and we already had code for that in
do_show_command. That code is now factored out to the new
get_setshow_command_value_string function.
- There's a new "maint with" command added too:
(gdb) help maint with
Like "with", but works with "maintenance set" variables.
Usage: maintenance with SETTING [VALUE] [-- COMMAND]
With no COMMAND, repeats the last executed command.
SETTING is any setting you can change with the "maintenance set"
subcommands.
"with" and "maint with" share 99% of the implementation.
This might be useful on its own, but it's also useful for testing,
since with this, we can use the "maint set/show test-settings"
settings for exercising the "with" machinery with all the command
type variants (all enum var_types). This is done in the new
gdb/base/with.exp testcase.
The documentation bits are originally based on Philippe's docs for the
"/" command, hence the attribution in the ChangeLog.
gdb/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "with" and "maint with".
* cli/cli-cmds.c (with_command_1, with_command_completer_1)
(with_command, with_command_completer): New.
(pipe_command): Adjust to new repeat_previous
interface.
(_initialize_cli_cmds): Install the "with" command and its "w"
alias.
* cli/cli-cmds.h (with_command_1, with_command_completer_1): New
declarations.
* cli/cli-setshow.c (parse_cli_var_uinteger)
(parse_cli_var_zuinteger_unlimited, do_set_command): Handle empty
argument strings for all var_types.
(get_setshow_command_value_string): New, factored out from ...
(do_show_command): ... this.
* cli/cli-setshow.h: Include <string>.
(get_setshow_command_value_string): Declare.
* command.h (repeat_previous): Now returns const char *. Adjust
comment.
* maint.c: Include "cli/cli-cmds.h".
(maintenance_with_cmd, maintenance_with_cmd_completer): New.
(_initialize_maint_cmds): Register the "maintenance with" command.
* top.c (repeat_previous): Move bits from pipe_command here:
Return the saved command line, if any; error out if there's no
command to relaunch.
gdb/doc/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command Settings): New node documenting the general
concept of settings, how to change them, and the new "with"
command.
(Maintenance Commands): Document "maint with".
gdb/testsuite/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
* gdb.base/with.c: New file.
* gdb.base/with.exp: New file.
|
|
alias_command does not detect that the prefixes of the alias command and the
aliased command are not matching: it is comparing the alias prefix
with itself, instead of comparing it with the aliased command prefix.
This causes either the alias command to silently do nothing,
or to have GDB asserting:
(gdb) alias assigne imprime limite-elements = set print elements
../../binutils-gdb/gdb/cli/cli-cmds.c:1552: internal-error: void alias_command(const char*, int): Assertion `c_command != NULL && c_command != (struct cmd_list_element *) -1' failed.
A problem internal to GDB has been detected,
Fix the logic, and update gdb.base/alias.exp to test these cases.
gdb/ChangeLog
2019-06-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (alias_command): Compare the alias prefix
with the command prefix.
gdb/testsuite/ChangeLog
2019-06-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/alias.exp: Test non matching/non existing prefixes.
|
|
I noticed some unnecessary casts of NULL. This removes all the
unnecessary ones, leaving only ones where we must ensure that NULL has
pointer type for passing through varargs.
I removed a couple of useless casts of 0 that I noticed while writing
this.
Tested by rebuilding.
gdb/ChangeLog
2019-06-16 Tom Tromey <tom@tromey.com>
* valops.c (value_cast, value_slice): Remove unnecessary cast.
* breakpoint.c (stopin_command, stopat_command)
(until_break_command, decode_location_default): Remove unnecessary
cast.
* utils.c (subset_compare): Remove unnecessary cast.
* ada-lang.c (ada_update_initial_language): Remove unnecessary
cast.
* linespec.c (decode_line_with_last_displayed): Remove unnecessary
cast.
* infcmd.c (path_command): Remove unnecessary cast.
* coffread.c (decode_type): Remove unnecessary cast.
* xcoffread.c (read_xcoff_symtab): Remove unnecessary cast.
* mipsread.c (mipscoff_symfile_read): Remove unnecessary cast.
* tui/tui-stack.c (tui_show_locator_content)
(tui_show_frame_info): Remove unnecessary cast.
* tui/tui-win.c (tui_scroll_forward_command)
(tui_scroll_backward_command, tui_set_focus, tui_set_win_height)
(parse_scrolling_args): Remove unnecessary cast.
* tui/tui-data.c (init_win_info, tui_del_window)
(tui_free_window, tui_del_data_windows, tui_free_data_content)
(free_content_elements): Remove unnecessary cast.
* tui/tui-windata.c (tui_first_data_item_displayed): Remove
unnecessary cast.
* tui/tui-source.c (tui_set_source_content)
(tui_vertical_source_scroll): Remove unnecessary cast.
* tui/tui-layout.c (tui_default_win_height): Remove unnecessary
cast.
* tui/tui-io.c (tui_initialize_io): Remove unnecessary cast.
* tui/tui-regs.c (tui_display_registers_from)
(tui_display_register): Remove unnecessary cast.
* tui/tui-wingeneral.c (tui_refresh_win, tui_delete_win)
(tui_unhighlight_win, tui_highlight_win, tui_make_window)
(make_visible): Remove unnecessary cast.
* tui/tui-winsource.c (tui_erase_source_content)
(tui_update_breakpoint_info, tui_set_exec_info_content): Remove
unnecessary cast.
* ax-gdb.c (agent_command_1): Remove unnecessary cast.
* cli/cli-setshow.c (cmd_show_list): Remove unnecessary cast.
* stabsread.c (read_type, read_array_type, read_range_type):
Remove unnecessary cast.
* mdebugread.c (mdebug_build_psymtabs): Remove unnecessary cast.
(parse_symbol, parse_type, upgrade_type, parse_external)
(parse_partial_symbols, psymtab_to_symtab_1, cross_ref): Remove
unnecessary cast.
* gdb_bfd.c (gdb_bfd_map_section): Remove unnecessary cast.
|
|
PR gdb/24502 requests that the "set logging" log file not contain
style escape sequences emitted by gdb.
This seemed like a reasonable request to me, so this patch implements
filtering for the log file.
This also updates a comment in ui-style.h that I noticed while writing
the patch.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-14 Tom Tromey <tromey@adacore.com>
PR gdb/24502:
* ui-style.h (skip_ansi_escape): Update comment.
* ui-file.h (class no_terminal_escape_file): New class.
* ui-file.c (no_terminal_escape_file::write)
(no_terminal_escape_file::puts): New methods.
* cli/cli-logging.c (handle_redirections): Use
no_terminal_escape_file.
gdb/testsuite/ChangeLog
2019-06-14 Tom Tromey <tromey@adacore.com>
PR gdb/24502:
* gdb.base/style-logging.exp: New file.
|
|
With integer commands that support "unlimited", we currently fail to
notice junk after "unlimited":
(gdb) show print elements
Limit on string chars or array elements to print is 200.
(gdb) set print elements unlimited foo
(gdb) show print elements
Limit on string chars or array elements to print is unlimited.
This commit fixes that. After, we get:
(gdb) set print elements unlimited foo
Junk after "unlimited": foo
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* cli/cli-setshow.c (cli/cli-setshow.c): New parameter
'expression'. When parsing an expression, error out if there's
junk after "unlimited".
(parse_cli_var_uinteger, parse_cli_var_zuinteger_unlimited)
(do_set_command): Adjust calls to is_unlimited_literal.
gdb/testsuite/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* gdb.base/settings.exp (test-integer): Test junk after
"unlimited".
|
|
Now that "thread/frame apply" have been converted to the gdb::option
framework, these functions are no longer used.
For a while, I thought about keeping the unit tests, by making a local
version of parse_flags_qcs in the unit tests file. But all that would
really test that is used by GDB itself, is the validate_flags_qcs
function. So in the end, I went through all the unit tests, and
converted any that wasn't already covered to gdb.base/options.exp
tests. And those have all already been added in previous patches.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* cli/cli-utils.c (parse_flags, parse_flags_qcs): Delete.
* cli/cli-utils.h (parse_flags, parse_flags_qcs): Delete.
* unittests/cli-utils-selftests.c (test_parse_flags)
(test_parse_flags_qcs): Delete.
(test_cli_utils): Don't call deleted functions.
|
|
This adds support for '-'-style options to the "frame apply" family of
commands -- "frame apply COUNT", "frame apply level", "frame apply
all", "faas" and "tfaas".
The -q/-c/-s flags were already supported, -past-main/-past-entry is
new:
~~~
(gdb) help frame apply all
Apply a command to all frames.
Usage: frame apply all [OPTION]... COMMAND
Prints the frame location information followed by COMMAND output.
By default, an error raised during the execution of COMMAND
aborts "frame apply".
Options:
-q
Disables printing the frame location information.
-c
Print any error raised by COMMAND and continue.
-s
Silently ignore any errors or empty output produced by COMMAND.
-past-main [on|off]
Set whether backtraces should continue past "main".
Normally the caller of "main" is not of interest, so GDB will terminate
the backtrace at "main". Set this if you need to see the rest
of the stack trace.
-past-entry [on|off]
Set whether backtraces should continue past the entry point of a program.
Normally there are no callers beyond the entry point of a program, so GDB
will terminate the backtrace there. Set this if you need to see
the rest of the stack trace.
~~~
TAB completion of options is now supported. Also, TAB completion of
COMMAND in "frame apply all COMMAND" does the right thing now, making
use of complete_command, added by the previous patch. E.g.:
(gdb) thread apply all -ascending frame apply all -past-main print -[TAB]
-address -elements -pretty -symbol
-array -null-stop -repeats -union
-array-indexes -object -static-members -vtbl
(gdb) thread apply all -ascending frame apply all -past-main print glo[TAB]
global1 global2
The change to tfaas_command is necessary because otherwise you get
this:
(gdb) tfaas --
Unrecognized option at: frame apply all -s --
That's because the above is equivalent to:
(gdb) thread apply all -s frame apply all -s --
and the "--" instructs "thread apply" to consider everything up to
"--" as its command options. And from that view, "frame" is an
invalid option.
The change makes tfaas be equivalent to:
(gdb) thread apply all -s -- frame apply all -s --
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* cli/cli-utils.c (parse_flags_qcs): Use validate_flags_qcs.
(validate_flags_qcs): New.
* cli/cli-utils.h (struct qcs_flags): Change field types to int.
(validate_flags_qcs): Declare.
* stack.c (qcs_flag_option_def, fr_qcs_flags_option_defs): New.
(make_frame_apply_options_def_group): New.
(frame_apply_command_count): Process options with
gdb::option::process_options.
(frame_apply_completer): New.
(frame_apply_level_completer, frame_apply_all_completer)
(frame_apply_completer): New.
(_initialize_stack): Update help of "frame apply", "frame apply
level", "frame apply all" and "faas" to mention supported options
and install command completers.
* stack.h (frame_apply_all_completer): Declare.
* thread.c: Include "stack.h".
(tfaas_command): Add "--".
(_initialize_thread): Update help "tfaas" to mention supported
options and install command completer.
gdb/testsuite/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* gdb.base/options.exp (test-frame-apply): New.
(top level): Test print commands with different "frame apply"
prefixes.
|
|
A following patch will introduce options for the "backtrace" command,
based on some "set print" and "set backtrace" settings. There's one
setting in particular that is a bit annoying if we want to describe
the backtrace options and the settings commands using the same data
structures:
"set print raw frame-arguments"
The problem is that space between "raw" and "frame-arguments".
Calling the option
"bt -raw frame-arguments"
would be odd. So I'm calling the option
"bt -raw-frame-arguments"
instead.
And for consistency, this patch renames the set/show commands to:
"set print raw-frame-arguments"
"show print raw-frame-arguments"
I.e., dash instead of space. The old commands are left in place, but
marked deprecated.
We need to adjust a couple testcases, because the relevant tests use
gdb_test_no_output and the old commands are no longer silent:
(gdb) set print raw frame-arguments on
Warning: command 'set print raw frame-arguments' is deprecated.
Use 'set print raw-frame-arguments'.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* NEWS (Changed commands): Mention set/show print raw-frame-arguments,
and that "set/show print raw frame-arguments" are now deprecated.
* cli/cli-decode.c (add_setshow_boolean_cmd): Now returns the
command.
* command.h (add_setshow_boolean_cmd): Return cmd_list_element *.
* stack.c (_initialize_stack): Install "set/show print
raw-frame-arguments", and deprecate "set/show print raw
frame-arguments".
* valprint.c (_initialize_valprint): Deprecate "set/show print
raw".
gdb/doc/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Print Settings): Document "set/show print
raw-frame-arguments" instead of "set/show print raw
frame-arguments".
gdb/testsuite/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* gdb.guile/scm-frame-args.exp: Use "set print
raw-frame-arguments" instead of "set print raw frame-arguments".
* gdb.python/py-frame-args.exp: Likewise.
|
|
This commit adds a generic command options framework, that makes it
easy enough to add '-'-style options to commands in a uniform way,
instead of each command implementing option parsing in its own way.
Options are defined in arrays of option_def objects (for option
definition), and the same options definitions are used for supporting
TAB completion, and also for generating the relevant help fragment of
the "help" command. See the gdb::options::build_help function, which
returns a string with the result of replacing %OPTIONS% in a template
string with an auto-generated "help" string fragment for all the
passed-in options.
Since most options in GDB are in the form of "-OPT", with a single
dash, this is the format that the framework supports.
I like to think of gdb's "-OPT" as the equivalent to getopt's long
options format ("--OPT"), and gdb's "/" as the equivalent to getopt's
short options format. getopt's short options format allows mixing
several one-character options, like "ls -als", kind of similar to
gdb's "x /FMT" and "disassemble /MOD", etc. While with gdb's "-"
options, the option is expected to have a full name, and to be
abbreviatable. E.g., "watch -location", "break -function main", etc.
This patch only deals with "-" options. The above comment serves more
to disclose why I don't think we should support mixing several
unrelated options in a single "-" option invocation, like "thread
apply -qcs" instead of "thread apply -q -c -s".
The following patches will add uses of the infrastructure to several
key commands. Most notably, "print", "compile print", "backtrace",
"frame apply" and "thread apply". I tried to add options to several
commands in order to make sure the framework didn't leave that many
open holes open.
Options use the same type as set commands -- enum var_types. So
boolean options are var_boolean, enum options are var_enum, etc. The
idea is to share code between settings commands and command options.
The "print" options will be based on the "set print" commands, and
their names will be the same. Actually, their definitions will be the
same too. There is a function to create "set/show" commands from an
array for option definitions:
/* Install set/show commands for options defined in OPTIONS. DATA is
a pointer to the structure that holds the data associated with the
OPTIONS array. */
extern void add_setshow_cmds_for_options (command_class cmd_class, void *data,
gdb::array_view<const option_def> options,
struct cmd_list_element **set_list,
struct cmd_list_element **show_list);
That will be used by several following patches.
Other features:
- You can use the "--" delimiter to explicitly indicate end of
options. Several existing commands use this token sequence for
this effect already, so this just standardizes it.
- You can shorten option names, as long as unambiguous. Currently,
some commands allow this (e.g., break -function), while others do
not (thread apply all -ascending). As GDB allows abbreviating
command names and other things, it feels more GDB-ish to allow
abbreviating option names too, to me.
- For boolean options, 0/1 stands for off/on, just like with boolean
"set" commands.
- For boolean options, "true" is implied, just like with boolean "set
commands.
These are the option types supported, with a few examples:
- boolean options (var_boolean). The option's argument is optional.
(gdb) print -pretty on -- *obj
(gdb) print -pretty off -- *obj
(gdb) print -p -- *obj
(gdb) print -p 0 -- *obj
- flag options (like var_boolean, but no option argument (on/off))
(gdb) thread apply all -s COMMAND
- enum options (var_enum)
(gdb) bt -entry-values compact
(gdb) bt -e c
- uinteger options (var_uinteger)
(gdb) print -elements 100 -- *obj
(gdb) print -e 100 -- *obj
(gdb) print -elements unlimited -- *obj
(gdb) print -e u -- *obj
- zuinteger-unlimited options (var_zuinteger_unlimited)
(gdb) print -max-depth 100 -- obj
(gdb) print -max-depth -1 -- obj
(gdb) print -max-depth unlimited -- obj
Other var_types could be supported, of course. These were just the
types that I needed for the commands that I ported over, in the
following patches.
It was interesting (and unfortunate) to find that we need at least 3
different modes to cover the existing commands:
- Commands that require ending options with "--" if you specify any
option: "print" and "compile print".
- Commands that do not want to require "--", and want to error out if
you specify an unknown option (i.e., an unknown argument that starts
with '-'): "compile code" / "compile file".
- Commands that do not want to require "--", and want to process
unknown options themselves: "bt", because of "bt -COUNT",
"thread/frame apply", because "-" is a valid command.
The different behavior is encoded in the process_options_mode enum,
passed to process_options/complete_options.
For testing, this patch adds one representative maintenance command
for each of the process_options_mode values, that are used by the
testsuite to exercise the options framework:
(gdb) maint test-options require-delimiter
(gdb) maint test-options unknown-is-error
(gdb) maint test-options unknown-is-operand
and adds another command to help with TAB-completion testing:
(gdb) maint show test-options-completion-result
See their description at the top of the maint-test-options.c file.
Docs/NEWS are in a patch later in the series.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_CLI_SRCS): Add cli/cli-option.c.
(COMMON_SFILES): Add maint-test-settings.c.
* cli/cli-decode.c (boolean_enums): New global, factored out from
...
(add_setshow_boolean_cmd): ... here.
* cli/cli-decode.h (boolean_enums): Declare.
* cli/cli-option.c: New file.
* cli/cli-option.h: New file.
* cli/cli-setshow.c (parse_cli_boolean_value(const char **)): New,
factored out from ...
(parse_cli_boolean_value(const char *)): ... this.
(is_unlimited_literal): Change parameter type to pointer to
pointer. Adjust and advance ARG pointer.
(parse_cli_var_uinteger, parse_cli_var_zuinteger_unlimited)
(parse_cli_var_enum): New, factored out from ...
(do_set_command): ... this. Adjust.
* cli/cli-setshow.h (parse_cli_boolean_value)
(parse_cli_var_uinteger, parse_cli_var_zuinteger_unlimited)
(parse_cli_var_enum): Declare.
* cli/cli-utils.c: Include "cli/cli-option.h".
(get_ulongest): New.
* cli/cli-utils.h (get_ulongest): Declare.
(check_for_argument): New overloads.
* maint-test-options.c: New file.
gdb/testsuite/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* gdb.base/options.c: New file.
* gdb.base/options.exp: New file.
|
|
While adding -OPT options to "frame apply level", I noticed that:
(gdb) frame apply level 0 -[TAB]
wasn't completing on the supported options. This commit fixes it.
We'll get instead:
(gdb) frame apply level 0 -
-c -past-entry -past-main -q -s
I added the isspace check because this case:
(gdb) frame apply level 0-
can't be an option.
Tests for this will be in a new gdb.base/options.exp file, in a
following patch. It will exercise all of:
(gdb) frame apply level 0-
(gdb) frame apply level 0 -
(gdb) frame apply level 0 --
(gdb) frame apply level 0 -- -
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* cli/cli-utils.c (number_or_range_parser::get_number): Do not
parse a range if "-" is at the end of the string.
|
|
We currently accept "o" with boolean/auto-boolean commands, taking it
to mean "on". But "o" is ambiguous, between "on" and "off". I can't
imagine why assuming the user wanted to type "on" is a good idea, it
might have been a typo.
This commit makes gdb error out. We now get:
(gdb) maint test-settings set boolean o
"on" or "off" expected.
(gdb) maint test-settings set auto-boolean o
"on", "off" or "auto" expected.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* cli/cli-setshow.c (parse_auto_binary_operation)
(parse_cli_boolean_value): Don't allow "o".
gdb/testsuite/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* gdb.base/settings.exp (test-boolean, test-auto-boolean): Check
that "o" is ambiguous.
|
|
The default command completer is symbol_completer, but it makes no
sense for a "show" command to complete on symbols, or anything else,
really.
I wonder whether we should instead make the default be no completer.
That seems like a much larger/complicated audit/change, so I'd like to
move forward with this version, as it'll be covered by tests. I
noticed this because a following patch will add a new
gdb.base/settings.exp testcase that exercises all sorts of details of
settings commands, including completing the show commands, using new
representative "maint test-settings <type or settings command>"
commands.
Also remove the completer for var_string and var_string_noescape
commands. No point in completing symbols when GDB is expecting a
string.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* cli/cli-decode.c (add_setshow_cmd_full): Remove "show"
completer.
(add_setshow_string_cmd, add_setshow_string_noescape_cmd): Remove
"set" completers.
|
|
With enum commands, we currently fail to notice junk after the value.
Currently:
(gdb) set print entry-values compact foo
(gdb) show print entry-values foo
Printing of function arguments at function entry is "compact".
After this fix:
(gdb) set print entry-values compact foo
Junk after item "compact": foo
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* cli/cli-setshow.c (do_set_command) <var_enum>: Detect junk
after item.
|
|
Currently we can abbreviate "on/off/enable/disable/yes/no" in boolean
settings,
(gdb) set non-stop of
(gdb) set non-stop en
we can abbreviate the items of enumeration commands,
(gdb) set print frame-arguments scal
(gdb) set scheduler-locking rep
but we cannot abbreviate "unlimited" in integer commands.
(gdb) set print elements u
No symbol "u" in current context.
This commit fixes that.
Testcases will be in gdb.base/settings.exp and gdb.base/options.exp,
in following patches.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* cli/cli-setshow.c (is_unlimited_literal): Allow abbreviations.
|
|
Basically every caller of check_for_argument needs to skip space after
the argument. This patch makes check_for_argument do it itself.
Suggested by Philippe Waroquiers.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Remove skip_spaces call.
* breakpoint.c (watch_maybe_just_location): Remove skip_spaces
call.
* cli/cli-cmds.c (apropos_command): Remove skip_spaces call.
* cli/cli-utils.c (extract_info_print_args): Remove skip_spaces
calls.
(check_for_argument): Skip spaces after argument.
|
|
ARI pointed out that a recent patch introduced a call to "warning"
with a string that ended in a newline:
https://sourceware.org/ml/gdb-patches/2019-06/msg00000.html
This is generally forbidden, I believe, because warning adds its own
newline.
This patch removes all of the trailing newlines I was able to find. I
searched for 'warning (.*\\n"' and then fixed the ones where the
newline appeared at the end of the string (some had internal
newlines).
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* m32c-tdep.c (m32c_m16c_address_to_pointer): Don't end warning
with a newline.
* guile/guile.c (handle_boot_error): Don't end warning with a
newline.
* cli/cli-cmds.c (exit_status_set_internal_vars): Don't end
warning with a newline.
* s12z-tdep.c (s12z_skip_prologue): Don't end warning with a
newline.
(s12z_frame_cache): Likewise.
* dwarf-index-cache.c (index_cache::store): Don't end warning with
a newline.
* solib-svr4.c (disable_probes_interface): Don't end warning with
a newline.
* nat/fork-inferior.c (fork_inferior): Don't end warning with a
newline.
* python/python.c (do_finish_initialization): Don't end warning
with a newline.
gdb/gdbserver/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* remote-utils.c (look_up_one_symbol, relocate_instruction): Don't
end warning with a newline.
* linux-s390-low.c (s390_get_wordsize): Don't end warning with a
newline.
* thread-db.c (attach_thread): Don't end warning with a newline.
(thread_db_notice_clone): Likewise.
* tracepoint.c (gdb_agent_helper_thread): Don't end warning with a
newline.
* linux-x86-low.c (x86_get_min_fast_tracepoint_insn_len): Don't
end warning with a newline.
|
|
Adds an utility function to make it shorter to write the common case
of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it
throughout.
Note: I tried to put this in common/common-utils.h near skip_spaces,
etc. but that is included in common/common-defs.h before
common/gdb_unique_ptr.h is included, so it would fail to compile
because gdb::unique_xmalloc_ptr isn't defined at that point yet. I
tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but
that doesn't work because gdb_unique_ptr.h depends on common-utils.h
for xfree.
gdb/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* common/gdb_unique_ptr.h (make_unique_xstrdup): New.
* ada-lang.c (catch_ada_completer): Use make_unique_xstrdup.
* breakpoint.c (condition_completer): Likewise.
* cli/cli-dump.c (scan_expression): Likewise.
* common/filestuff.c (mkdir_recursive): Likewise.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up)
* common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile)
(gdb_abspath): Likewise.
* compile/compile-cplus-types.c
(compile_cplus_instance::decl_name): Likewise.
* completer.c (complete_explicit_location):
(signal_completer, reg_or_group_completer_1): Likewise.
* cp-support.c (cp_remove_params_if_any): Likewise.
* fbsd-tdep.c (fbsd_core_vnode_path): Likewise.
* guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise.
* infcmd.c (strip_bg_char): Likewise.
* linespec.c (copy_token_string): Likewise.
* mi/mi-main.c (output_cores): Likewise.
* psymtab.c (psymtab_search_name):
* symfile.c (test_set_ext_lang_command): Likewise.
* target.c (target_fileio_read_stralloc): Likewise.
* tui/tui-regs.c (tui_reggroup_completer): Likewise.
* value.c (complete_internalvar): Likewise.
gdb/gdbserver/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* server.c (captured_main): Use make_unique_xstrdup.
|
|
The "help" command can output long list of command names or classes.
Use the title style to style the command names or classes to make
the output more readable.
Similarly, change "apropos" command to also style the command names.
It is sometimes unclear why "apropos REGEXP" lists some commands,
and then the user has to manually do 'help command' for all commands
listed by "apropos" to see more details about the matching commands.
=> Add an optional flag -v so that "apropos -v REGEXP":
* outputs the full documentation of matching commands.
* highlights the documentation parts matching REGEXP.
|
|
Have 'show style' and its subcommands using a style to style its output.
This allows the GDB user or developer to use 'show style' to visually see
with one command how all the current styles look like.
Add 2 new styles highlight style, title style and fputs_highlighted function.
Highlight style is used by fputs_highlighted to highlight the parts of
its char *STR argument that match a HIGHLIGHT regexp.
This (and the title style) will be used in a following patch.
|
|
The pipe command allows to run a GDB command, and pipe its output
to a shell command:
(gdb) help pipe
Send the output of a gdb command to a shell command.
Usage: | [COMMAND] | SHELL_COMMAND
Usage: | -d DELIM COMMAND DELIM SHELL_COMMAND
Usage: pipe [COMMAND] | SHELL_COMMAND
Usage: pipe -d DELIM COMMAND DELIM SHELL_COMMAND
Executes COMMAND and sends its output to SHELL_COMMAND.
The -d option indicates to use the string DELIM to separate COMMAND
from SHELL_COMMAND, in alternative to |. This is useful in
case COMMAND contains a | character.
With no COMMAND, repeat the last executed command
and send its output to SHELL_COMMAND.
(gdb)
For example:
(gdb) pipe print some_data_structure | grep -B3 -A3 something
The pipe character is defined as an alias for pipe command, so that
the above can be typed as:
(gdb) | print some_data_structure | grep -B3 -A3 something
If no GDB COMMAND is given, then the previous command is relaunched,
and its output is sent to the given SHELL_COMMAND.
This also defines convenience vars $_shell_exitcode and $_shell_exitsignal
to record the exit code and exit signal of the last shell command
launched by GDB e.g. by "shell", "pipe", ...
gdb/ChangeLog
2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (pipe_command): New function.
(_initialize_cli_cmds): Call add_com for pipe_command.
Define | as an alias for pipe.
(exit_status_set_internal_vars): New function.
(shell_escape): Call exit_status_set_internal_vars.
cli/cli-decode.c (find_command_name_length): Recognize | as
a single character command.
|
|
When building gdb on ubuntu 16.04 with gcc 5.4.0, and running the gdb
testsuite we run into:
...
FAIL: gdb.linespec/explicit.exp: complete after -line: \
cmd complete "b -line argument " (timeout)
...
The failure is reproducible outside the testsuite like this:
...
$ gdb -q build/gdb/testsuite/outputs/gdb.linespec/explicit/explicit \
-ex "complete b -line argument"
Reading symbols from \
build/gdb/testsuite/outputs/gdb.linespec/explicit/explicit...
terminate called after throwing an instance of 'std::length_error'
what(): basic_string::_M_create
Aborted (core dumped)
...
The problem is here in complete_command:
...
completion_result result = complete (arg, &word, "e_char);
std::string arg_prefix (arg, word - arg);
if (result.number_matches != 0)
...
The problem is that the word variable is not initialized when
result.number_matches == 0, but the variable is still used in the arg_prefix
initialization.
Fix this by guarding the arg_prefix initialization with the
'result.number_matches != 0' test.
Build and tested on x86_64-linux.
gdb/ChangeLog:
2019-05-21 Tom de Vries <tdevries@suse.de>
PR cli/24587
* cli/cli-cmds.c (complete_command): Fix use of unitialized variable.
|
|
Currently, when logging is enabled, output will be sent to both a
logfile and standard terminal output. The redirect option sends output
only to the logfile. This includes all debug output.
Add the option to redirect debug output seperately to normal
output, using the cli command:
set logging debugredirect on
By setting this and enabling logging, all output and debug will
be sent to the logfile. The user will still see all output but
no debug output.
This causes a change in behaviour for anyone currently using
logging redirect, as now only output will be redirected. Users
will have to issue the additional command above to also redirect
debug.
Expand ui-redirect.exp cover the changes.
gdb/ChangeLog:
* cli/cli-interp.c (struct saved_output_files): Add saved entry.
(cli_interp_base::set_logging): Check debug_redirect.
* cli/cli-interp.h (set_logging): Add debug_redirect parameter.
* cli/cli-logging.c (debug_redirect): Add static variable.
(pop_output_files): Add default param.
(handle_redirections): Print debug setting.
(show_logging_command): Likewise.
(_initialize_cli_logging): Add debugredirect command.
* interps.c (current_interp_set_logging): Add debug_redirect
parameter.
* interps.h (set_logging): Add debug_redirect parameter.
(current_interp_set_logging): Likewise.
* mi/mi-common.h: Likewise.
* mi/mi-interp.c (mi_interp::set_logging): Likewise.
gdb/testsuite/ChangeLog:
* gdb.base/ui-redirect.exp: Add debug redirect tests.
|
|
Instead of using two bools to decide if the files should close when tee_file
is closed, make file one stay open and file two close. This simplifies the
use cases for it.
Inline the make_logging_output into the calling functions (the logic here
looks ugly in order to simplify a later change).
Expand ui-redirect.exp to cover the changes, similar to mi-logging.exp.
gdb/ChangeLog:
* cli/cli-interp.c (cli_interp_base::set_logging): Create tee_file
directly.
* cli/cli-interp.h (make_logging_output): Remove declaration.
* cli/cli-logging.c (make_logging_output): Remove function.
* mi/mi-interp.c (mi_interp::set_logging): Create tee_file
directly.
* ui-file.c (tee_file::tee_file): Remove bools.
(tee_file::~tee_file): Remove deletes.
* ui-file.h (tee_file): Remove bools.
gdb/testsuite/ChangeLog:
* gdb.base/ui-redirect.exp: Test redirection.
|
|
Extract completion logic from CLI complete_command() into a new
helper function complete().
gdb/Changelog:
* completer.h (complete): New function.
* completer.c (complete): Likewise.
* cli/cli-cmds.c: (complete_command): Update to use new complete()
function defined in completer.h.
|
|
This changes valid_command_p to return bool.
gdb/ChangeLog
2019-05-04 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (valid_command_p): Return bool.
|
|
This changes valid_user_defined_cmd_name_p to return bool.
gdb/ChangeLog
2019-05-04 Tom Tromey <tom@tromey.com>
* cli/cli-decode.c (valid_user_defined_cmd_name_p): Return bool.
* command.h (valid_user_defined_cmd_name_p): Channge return type.
|
|
This makes exception handling more efficient in a few spots, through
the use of const- and rvalue-references.
I wrote this patch by commenting out the gdb_exception copy
constructor and then examining the resulting error messages one by
one, introducing the use of std::move where appropriate.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* xml-support.c (struct gdb_xml_parser) <set_error>: Take an
rvalue reference.
(gdb_xml_start_element_wrapper, gdb_xml_end_element_wrapper)
(gdb_xml_parser::parse): Use std::move.
* python/python-internal.h (gdbpy_convert_exception): Take a const
reference.
* python/py-value.c (valpy_getitem, valpy_nonzero): Use
std::move.
* python/py-utils.c (gdbpy_convert_exception): Take a const
reference.
* python/py-inferior.c (infpy_write_memory, infpy_search_memory):
Use std::move.
* python/py-breakpoint.c (bppy_set_condition, bppy_set_commands):
Use std::move.
* mi/mi-main.c (mi_print_exception): Take a const reference.
* main.c (handle_command_errors): Take a const reference.
* linespec.c (parse_linespec): Use std::move.
* infcall.c (run_inferior_call): Use std::move.
(call_function_by_hand_dummy): Use std::move.
* exec.c (try_open_exec_file): Use std::move.
* exceptions.h (exception_print, exception_fprintf)
(exception_print_same): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Change parameters to
const reference.
* event-top.c (gdb_rl_callback_read_char_wrapper): Update.
* common/new-op.c: Use std::move.
* common/common-exceptions.h (struct gdb_exception): Add move
constructor.
(struct gdb_exception_error, struct gdb_exception_quit, struct
gdb_quit_bad_alloc): Change constructor to move constructor.
(throw_exception): Change parameter to rvalue reference.
* common/common-exceptions.c (throw_exception): Take rvalue
reference.
* cli/cli-interp.c (safe_execute_command): Use std::move.
* breakpoint.c (insert_bp_location, location_to_sals): Use
std::move.
|
|
Now that gdb_exception has a constructor, there's no need for
exception_none. This patch removes it.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* xml-support.c (gdb_xml_parser::gdb_xml_parser): Update.
* python/py-value.c (valpy_getitem, valpy_nonzero): Update.
* python/py-inferior.c (infpy_write_memory, infpy_search_memory):
Update.
* python/py-breakpoint.c (bppy_set_condition, bppy_set_commands):
Update.
* mi/mi-interp.c (mi_interp::exec): Update.
* linespec.c (parse_linespec): Update.
* infcall.c (run_inferior_call): Update.
* guile/scm-value.c (gdbscm_value_to_lazy_string): Update.
* guile/scm-symbol.c (gdbscm_lookup_symbol)
(gdbscm_lookup_global_symbol): Update.
* guile/scm-param.c (gdbscm_parameter_value): Update.
* guile/scm-frame.c (gdbscm_frame_read_register)
(gdbscm_frame_read_var): Update.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Update.
* exec.c (try_open_exec_file): Update.
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept)
(gdb_rl_callback_handler): Update.
* common/common-exceptions.h (exception_none): Don't declare.
* common/common-exceptions.c (exception_none): Don't define.
(struct catcher) <exception>: Update.
* cli/cli-interp.c (safe_execute_command): Update.
* breakpoint.c (insert_bp_location, location_to_sals): Update.
|
|
gdb/ChangeLog
2019-04-19 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (_initialize_cli_cmds): Move "shell" "!" alias
close to the add_com "shell".
|
|
This replaces throw_exception with "throw;" when possible. This was
written by script. The rule that is followed is that uses of the
form:
catch (... &name)
{
...
throw_exception (name);
}
... can be rewritten. This should always be safe, because exceptions
are caught by const reference, and therefore can't be modified in the
body of the catch.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* valops.c (value_rtti_indirect_type): Replace throw_exception
with throw.
* tracefile-tfile.c (tfile_target_open): Replace throw_exception
with throw.
* thread.c (thr_try_catch_cmd): Replace throw_exception with
throw.
* target.c (target_translate_tls_address): Replace throw_exception
with throw.
* stack.c (frame_apply_command_count): Replace throw_exception
with throw.
* solib-spu.c (append_ocl_sos): Replace throw_exception with
throw.
* s390-tdep.c (s390_frame_unwind_cache): Replace throw_exception
with throw.
* rs6000-tdep.c (rs6000_frame_cache)
(rs6000_epilogue_frame_cache): Replace throw_exception with throw.
* remote.c: Replace throw_exception with throw.
* record-full.c (record_full_message, record_full_wait_1)
(record_full_restore): Replace throw_exception with throw.
* record-btrace.c:
(get_thread_current_frame_id, record_btrace_start_replaying)
(cmd_record_btrace_bts_start, cmd_record_btrace_pt_start)
(cmd_record_btrace_start): Replace throw_exception with throw.
* parse.c (parse_exp_in_context_1): Replace throw_exception with
throw.
* linux-nat.c (detach_one_lwp, linux_resume_one_lwp)
(resume_stopped_resumed_lwps): Replace throw_exception with throw.
* linespec.c:
(find_linespec_symbols): Replace throw_exception with throw.
* infrun.c (displaced_step_prepare, resume): Replace
throw_exception with throw.
* infcmd.c (post_create_inferior): Replace throw_exception with
throw.
* inf-loop.c (inferior_event_handler): Replace throw_exception
with throw.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Replace throw_exception with throw.
* frame.c (frame_unwind_pc, get_prev_frame_if_no_cycle)
(get_prev_frame_always, get_frame_pc_if_available)
(get_frame_address_in_block_if_available, get_frame_language):
Replace throw_exception with throw.
* frame-unwind.c (frame_unwind_try_unwinder): Replace
throw_exception with throw.
* eval.c (fetch_subexp_value, evaluate_var_value)
(evaluate_funcall, evaluate_subexp_standard): Replace
throw_exception with throw.
* dwarf2loc.c (call_site_find_chain)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval):
Replace throw_exception with throw.
* dwarf2-frame.c (dwarf2_frame_cache): Replace throw_exception
with throw.
* darwin-nat.c (darwin_attach_pid): Replace throw_exception with
throw.
* cp-abi.c (baseclass_offset): Replace throw_exception with throw.
* completer.c (complete_line_internal): Replace throw_exception
with throw.
* compile/compile-object-run.c (compile_object_run): Replace
throw_exception with throw.
* cli/cli-script.c (process_next_line): Replace throw_exception
with throw.
* btrace.c (btrace_compute_ftrace_pt, btrace_compute_ftrace)
(btrace_enable, btrace_maint_update_pt_packets): Replace
throw_exception with throw.
* breakpoint.c (create_breakpoint, save_breakpoints): Replace
throw_exception with throw.
* break-catch-throw.c (re_set_exception_catchpoint): Replace
throw_exception with throw.
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Replace throw_exception with throw.
* aarch64-tdep.c (aarch64_make_prologue_cache)
(aarch64_make_stub_cache): Replace throw_exception with throw.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* linux-low.c (linux_detach_one_lwp): Replace throw_exception with
throw.
(linux_resume_one_lwp): Likewise.
|
|
This renames the gdb exception types. The old types were only needed
due to the macros in common-exception.h that are now gone.
The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem
needed, so this patch removes it entirely.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL):
Remove.
(gdb_exception_error): Rename from
gdb_exception_RETURN_MASK_ERROR.
(gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT.
(gdb_quit_bad_alloc): Update.
* aarch64-tdep.c: Update.
* ada-lang.c: Update.
* ada-typeprint.c: Update.
* ada-valprint.c: Update.
* amd64-tdep.c: Update.
* arch-utils.c: Update.
* break-catch-throw.c: Update.
* breakpoint.c: Update.
* btrace.c: Update.
* c-varobj.c: Update.
* cli/cli-cmds.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* common/common-exceptions.c: Update.
* common/new-op.c: Update.
* common/selftest.c: Update.
* compile/compile-c-symbols.c: Update.
* compile/compile-cplus-symbols.c: Update.
* compile/compile-object-load.c: Update.
* compile/compile-object-run.c: Update.
* completer.c: Update.
* corelow.c: Update.
* cp-abi.c: Update.
* cp-support.c: Update.
* cp-valprint.c: Update.
* darwin-nat.c: Update.
* disasm-selftests.c: Update.
* dtrace-probe.c: Update.
* dwarf-index-cache.c: Update.
* dwarf-index-write.c: Update.
* dwarf2-frame-tailcall.c: Update.
* dwarf2-frame.c: Update.
* dwarf2loc.c: Update.
* dwarf2read.c: Update.
* eval.c: Update.
* event-loop.c: Update.
* event-top.c: Update.
* exec.c: Update.
* f-valprint.c: Update.
* fbsd-tdep.c: Update.
* frame-unwind.c: Update.
* frame.c: Update.
* gdbtypes.c: Update.
* gnu-v3-abi.c: Update.
* guile/guile-internal.h: Update.
* guile/scm-block.c: Update.
* guile/scm-breakpoint.c: Update.
* guile/scm-cmd.c: Update.
* guile/scm-disasm.c: Update.
* guile/scm-frame.c: Update.
* guile/scm-lazy-string.c: Update.
* guile/scm-math.c: Update.
* guile/scm-param.c: Update.
* guile/scm-ports.c: Update.
* guile/scm-pretty-print.c: Update.
* guile/scm-symbol.c: Update.
* guile/scm-symtab.c: Update.
* guile/scm-type.c: Update.
* guile/scm-value.c: Update.
* i386-linux-tdep.c: Update.
* i386-tdep.c: Update.
* inf-loop.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* jit.c: Update.
* language.c: Update.
* linespec.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* main.c: Update.
* mi/mi-cmd-break.c: Update.
* mi/mi-cmd-stack.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* objc-lang.c: Update.
* p-valprint.c: Update.
* parse.c: Update.
* ppc-linux-tdep.c: Update.
* printcmd.c: Update.
* python/py-arch.c: Update.
* python/py-breakpoint.c: Update.
* python/py-cmd.c: Update.
* python/py-finishbreakpoint.c: Update.
* python/py-frame.c: Update.
* python/py-framefilter.c: Update.
* python/py-gdb-readline.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* python/py-lazy-string.c: Update.
* python/py-linetable.c: Update.
* python/py-objfile.c: Update.
* python/py-param.c: Update.
* python/py-prettyprint.c: Update.
* python/py-progspace.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* python/py-symbol.c: Update.
* python/py-type.c: Update.
* python/py-unwind.c: Update.
* python/py-utils.c: Update.
* python/py-value.c: Update.
* python/python.c: Update.
* record-btrace.c: Update.
* record-full.c: Update.
* remote-fileio.c: Update.
* remote.c: Update.
* riscv-tdep.c: Update.
* rs6000-aix-tdep.c: Update.
* rs6000-tdep.c: Update.
* rust-exp.y: Update.
* rust-lang.c: Update.
* s390-tdep.c: Update.
* selftest-arch.c: Update.
* solib-dsbt.c: Update.
* solib-frv.c: Update.
* solib-spu.c: Update.
* solib-svr4.c: Update.
* solib.c: Update.
* sparc64-linux-tdep.c: Update.
* stack.c: Update.
* symfile-mem.c: Update.
* symmisc.c: Update.
* target.c: Update.
* thread.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* tui/tui.c: Update.
* typeprint.c: Update.
* unittests/cli-utils-selftests.c: Update.
* unittests/parse-connection-spec-selftests.c: Update.
* valops.c: Update.
* valprint.c: Update.
* value.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* xml-support.c: Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* gdbreplay.c: Update.
* linux-low.c: Update.
* server.c: Update.
|
|
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
|
|
This changes the exception's "message" member to be a shared_ptr
wrapping a std::string. This allows removing the stack of exception
messages, because now exceptions will self-destruct when needed. This
also adds a noexcept copy constructor and operator= to gdb_exception,
plus a "what" method.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c (gdb_xml_parser::parse): Update.
* x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update.
* value.c (show_convenience): Update.
* unittests/cli-utils-selftests.c (test_number_or_range_parser)
(test_parse_flags_qcs): Update.
* thread.c (thr_try_catch_cmd): Update.
* target.c (target_translate_tls_address): Update.
* stack.c (print_frame_arg, read_frame_local, read_frame_arg)
(info_frame_command_core, frame_apply_command_count): Update.
* rust-exp.y (rust_lex_exception_test): Update.
* riscv-tdep.c (riscv_print_one_register_info): Update.
* remote.c (remote_target::enable_btrace): Update.
* record-btrace.c (record_btrace_enable_warn): Update.
* python/py-utils.c (gdbpy_convert_exception): Update.
* printcmd.c (do_one_display, print_variable_and_value): Update.
* mi/mi-main.c (mi_print_exception): Update.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT.
* mi/mi-cmd-stack.c (list_arg_or_local): Update.
* linux-nat.c (linux_nat_target::attach): Update.
* linux-fork.c (class scoped_switch_fork_info): Update.
* infrun.c (displaced_step_prepare): Update.
* infcall.c (call_function_by_hand_dummy): Update.
* guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update.
* gnu-v3-abi.c (print_one_vtable): Update.
* frame.c (get_prev_frame_always): Update.
* f-valprint.c (info_common_command_for_block): Update.
* exec.c (try_open_exec_file): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Update.
* dwarf2-frame.c (dwarf2_build_frame_info): Update.
* dwarf-index-cache.c (index_cache::store)
(index_cache::lookup_gdb_index): Update.
* darwin-nat.c (maybe_cache_shell): Update.
* cp-valprint.c (cp_print_value_fields): Update.
* compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol)
(gcc_cplus_symbol_address): Update.
* compile/compile-c-symbols.c (gcc_convert_symbol)
(gcc_symbol_address, generate_c_for_for_one_variable): Update.
* common/selftest.c: Update.
* common/common-exceptions.h (struct gdb_exception) <message>: Now
a std::string.
(exception_try_scope_entry, exception_try_scope_exit): Don't
declare.
(struct exception_try_scope): Remove.
(TRY): Don't use exception_try_scope.
(struct gdb_exception): Add constructor, operator=.
<what>: New method.
(struct gdb_exception_RETURN_MASK_ALL)
(struct gdb_exception_RETURN_MASK_ERROR)
(struct gdb_exception_RETURN_MASK_QUIT): Add constructor.
(struct gdb_quit_bad_alloc): Update.
* common/common-exceptions.c (exception_none): Change
initializer.
(struct catcher) <state, exception>: Initialize inline.
<prev>: Remove member.
(current_catcher): Remove.
(catchers): New global.
(exceptions_state_mc_init): Simplify.
(catcher_pop): Remove.
(exceptions_state_mc, exceptions_state_mc_catch): Update.
(try_scope_depth, exception_try_scope_entry)
(exception_try_scope_exit): Remove.
(throw_exception_sjlj): Update.
(exception_messages, exception_messages_size): Remove.
(throw_it): Simplify.
(gdb_exception_sliced_copy): Remove.
(throw_exception_cxx): Update.
* cli/cli-script.c (script_from_file): Update.
* breakpoint.c (insert_bp_location, update_breakpoint_locations):
Update.
* ada-valprint.c (ada_val_print): Update.
* ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr)
(create_excep_cond_exprs): Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c (handle_btrace_general_set, handle_qxfer_btrace)
(handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup)
(captured_main, main): Update.
* gdbreplay.c (main): Update.
|
|
This adds "set style source" (and "show style source") commands. This
gives the user control over whether source code is highlighted.
gdb/ChangeLog
2019-03-14 Tom Tromey <tromey@adacore.com>
* NEWS: Add item for "style sources" commands.
* source-cache.c (source_cache::get_source_lines): Check
source_styling.
* cli/cli-style.c (source_styling): New global.
(_initialize_cli_style): Add "style sources" commands.
(show_style_sources): New function.
* cli/cli-style.h (source_styling): Declare.
gdb/doc/ChangeLog
2019-03-14 Tom Tromey <tromey@adacore.com>
* gdb.texinfo (Output Styling): Document "set style source" and
"show style source".
gdb/testsuite/ChangeLog
2019-03-14 Tom Tromey <tromey@adacore.com>
* gdb.base/style.exp: Add "set style sources" test.
|
|
When the user toggles "set style enabled", the TUI should react by
redrawing the source window, if necessary. This patch implements this
behavior.
No test because the TUI is generally not tested.
This version of the patch incorporates Pedro's patch to provide a
clean way to force the TUI to update the source window's contents.
gdb/ChangeLog
2019-03-14 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@adacore.com>
* tui/tui-winsource.h (tui_refill_source_window): Declare.
* tui/tui-winsource.c (tui_refill_source_window): New function,
from...
(tui_horizontal_source_scroll): ... here. Move some logic.
* cli/cli-style.c (set_style_enabled): Notify new observable.
* tui/tui-hooks.c (tui_redisplay_source): New function.
(tui_attach_detach_observers): Attach or detach
tui_redisplay_source.
* observable.h (source_styling_changed): New observable.
* observable.c: Define source_styling_changed observable.
|
|
gdb/ChangeLog:
2019-03-08 Eli Zaretskii <eliz@gnu.org>
PR/24315
* utils.c (can_emit_style_escape) [_WIN32]: Don't disable styling
on MS-Windows if $TERM is not defined.
* cli/cli-style.c: Set cli_styling to 1 in the MinGW build.
* posix-hdep.c (gdb_console_fputs):
* mingw-hdep.c (rgb_to_16colors, gdb_console_fputs): New
functions.
* ui-file.h (gdb_console_fputs): Add prototype.
* ui-file.c (stdio_file::puts): Call gdb_console_fputs, and fall
back to fputs only if the former returns zero.
|
|
A customer noticed some mildly odd MI output, where CLI output was
split into multiple MI strings at unusual boundaries, like this:
~"$1 = (b => true"
~", p => 0x407260"
This is technically correct according to the MI spec, but still
unusual, in that there's no particular reason for the string to be
split where it is.
I tracked this down to a call to gdb_flush in generic_val_print.
Then, I went through all calls to gdb_flush and removed the ones I
thought were superfluous. In particular:
* Any call in the value-printing code;
* Likewise the type-printing code (just a single call); and
* Any call that immediately followed a printf that obviously
ended with a newline, my belief being that gdb's standard output
streams are line buffered (by inheriting the behavior from stdio)
Regression tested on x86-64 Fedora 29.
I didn't add a new test case. I tend to think we don't necessarily
want to specify this behavior in the tests. Let me know what you
think of this.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat_target::attach)
(windows_nat_target::detach): Don't call gdb_flush.
* valprint.c (generic_val_print, val_print, val_print_string):
Don't call gdb_flush.
* utils.c (defaulted_query): Don't call gdb_flush.
* typeprint.c (print_type_scalar): Don't call gdb_flush.
* target.c (target_announce_detach): Don't call gdb_flush.
* sparc64-tdep.c (adi_print_versions): Don't call gdb_flush.
* remote.c (extended_remote_target::attach): Don't call
gdb_flush.
* procfs.c (procfs_target::detach): Don't call gdb_flush.
* printcmd.c (do_examine): Don't call gdb_flush.
(info_display_command): Don't call gdb_flush.
* p-valprint.c (pascal_val_print): Don't call gdb_flush.
* nto-procfs.c (nto_procfs_target::attach): Don't call gdb_flush.
* memattr.c (info_mem_command): Don't call gdb_flush.
* mdebugread.c (mdebug_build_psymtabs): Don't call gdb_flush.
* m2-valprint.c (m2_val_print): Don't call gdb_flush.
* infrun.c (follow_exec, handle_command): Don't call gdb_flush.
* inf-ptrace.c (inf_ptrace_target::attach): Don't call gdb_flush.
* hppa-tdep.c (unwind_command): Don't call gdb_flush.
* gnu-nat.c (gnu_nat_target::attach): Don't call gdb_flush.
(gnu_nat_target::detach): Don't call gdb_flush.
* f-valprint.c (f_val_print): Don't call gdb_flush.
* darwin-nat.c (darwin_nat_target::attach): Don't call gdb_flush.
* cli/cli-script.c (read_command_lines): Don't call gdb_flush.
* cli/cli-cmds.c (shell_escape, print_disassembly): Don't call
gdb_flush.
* c-valprint.c (c_val_print): Don't call gdb_flush.
* ada-valprint.c (ada_print_scalar): Don't call gdb_flush.
|
|
Errors that happen in nested sourced files (when a sourced file sources
another file) lead to a wrong error message, or use-after-free.
For example, if I put this in "a.gdb":
command_that_doesnt_exist
and this in "b.gdb":
source a.gdb
and try to "source b.gdb" in GDB, the result may look like this:
(gdb) source b.gdb
b.gdb:1: Error in sourced command file:
_that_doesnt_exist:1: Error in sourced command file:
Undefined command: "command_that_doesnt_exist". Try "help".
Notice the wrong file name where "a.gdb" should be. The exact result
may differ, depending on the feelings of the memory allocator.
What happens is:
- The "source a.gdb" command is saved by command_line_append_input_line
in command_line_input's static buffer.
- Since we are sourcing a file, the script_from_file function stores the
script name (a.gdb) in the source_file_name global. However, it doesn't
do a copy, it just saves a pointer to command_line_input's static buffer.
- The "command_that_doesnt_exist" command is saved by
command_line_append_input_line in command_line_input's static buffer.
Depending on what xrealloc does, source_file_name may now point to
freed memory, or at the minimum the data it was pointing to was
overwritten.
- When the error is handled in script_from_file, we dererence
source_file_name to print the name of the file in which the error
occured.
To fix it, I made source_file_name an std::string, so that keeps a copy of
the file name instead of pointing to a buffer with a too small
lifetime.
With this patch, the expected filename is printed, and no use-after-free
occurs:
(gdb) source b.gdb
b.gdb:1: Error in sourced command file:
a.gdb:1: Error in sourced command file:
Undefined command: "command_that_doesnt_exist". Try "help".
I passed explicit template parameters to make_scoped_restore
(<std::string, const std::string &>), so that the second parameter is
passed by reference and avoid a copy.
It was not as obvious as I first thought to change gdb.base/source.exp
to test this, because source commands inside sourced files are
interpreted relative to GDB's current working directory, not the
directory of the currently sourced file. As a workaround, I moved the
snippet that tests errors after the snippet that adds the source
directory to the search path. This way, the "source source-error-1.gdb"
line in source-error.exp manages to find the file.
For reference, here is what ASAN reports when use-after-free occurs:
(gdb) source b.gdb
=================================================================
==18498==ERROR: AddressSanitizer: heap-use-after-free on address 0x60c000019847 at pc 0x7f1d3645de8e bp 0x7ffdcb892e50 sp 0x7ffdcb8925c8
READ of size 6 at 0x60c000019847 thread T0
#0 0x7f1d3645de8d in printf_common /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors_format.inc:546
#1 0x7f1d36477175 in __interceptor_vasprintf /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:1525
#2 0x5632eaffa277 in xstrvprintf(char const*, __va_list_tag*) /home/simark/src/binutils-gdb/gdb/common/common-utils.c:122
#3 0x5632eaff96d1 in throw_it /home/simark/src/binutils-gdb/gdb/common/common-exceptions.c:351
#4 0x5632eaff98df in throw_verror(errors, char const*, __va_list_tag*) /home/simark/src/binutils-gdb/gdb/common/common-exceptions.c:379
#5 0x5632eaff9a2a in throw_error(errors, char const*, ...) /home/simark/src/binutils-gdb/gdb/common/common-exceptions.c:394
#6 0x5632eafca21a in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1553
#7 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569
#8 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605
#9 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664
#10 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106
#11 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892
#12 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630
#13 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583
#14 0x5632ebf3cf09 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:425
#15 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547
#16 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569
#17 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605
#18 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664
#19 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106
#20 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892
#21 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630
#22 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583
#23 0x5632eb3b2f87 in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/simark/src/binutils-gdb/gdb/event-top.c:770
#24 0x5632eb3b0fe1 in gdb_rl_callback_handler /home/simark/src/binutils-gdb/gdb/event-top.c:213
#25 0x5632ec1c8729 in rl_callback_read_char /home/simark/src/binutils-gdb/readline/callback.c:220
#26 0x5632eb3b0b8f in gdb_rl_callback_read_char_wrapper_noexcept /home/simark/src/binutils-gdb/gdb/event-top.c:175
#27 0x5632eb3b0da1 in gdb_rl_callback_read_char_wrapper /home/simark/src/binutils-gdb/gdb/event-top.c:192
#28 0x5632eb3b2186 in stdin_event_handler(int, void*) /home/simark/src/binutils-gdb/gdb/event-top.c:511
#29 0x5632eb3aa6a9 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733
#30 0x5632eb3aaf41 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859
#31 0x5632eb3a88ea in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:347
#32 0x5632eb3a89bf in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371
#33 0x5632eb76fbfc in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:330
#34 0x5632eb772ea8 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1176
#35 0x5632eb773071 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1192
#36 0x5632eabfe7f9 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
#37 0x7f1d3554f222 in __libc_start_main (/usr/lib/libc.so.6+0x24222)
#38 0x5632eabfe5dd in _start (/home/simark/build/binutils-gdb/gdb/gdb+0x195d5dd)
0x60c000019847 is located 7 bytes inside of 128-byte region [0x60c000019840,0x60c0000198c0)
freed by thread T0 here:
#0 0x7f1d36502491 in __interceptor_realloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:105
#1 0x5632eaff9f47 in xrealloc /home/simark/src/binutils-gdb/gdb/common/common-utils.c:62
#2 0x5632eaff6b44 in buffer_grow(buffer*, char const*, unsigned long) /home/simark/src/binutils-gdb/gdb/common/buffer.c:40
#3 0x5632eb3b271d in command_line_append_input_line /home/simark/src/binutils-gdb/gdb/event-top.c:614
#4 0x5632eb3b28c6 in handle_line_of_input(buffer*, char const*, int, char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:654
#5 0x5632ebf402a6 in command_line_input(char const*, char const*) /home/simark/src/binutils-gdb/gdb/top.c:1252
#6 0x5632ebf3cee9 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:422
#7 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547
#8 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569
#9 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605
#10 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664
#11 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106
#12 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892
#13 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630
#14 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583
#15 0x5632ebf3cf09 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:425
#16 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547
#17 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569
#18 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605
#19 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664
#20 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106
#21 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892
#22 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630
#23 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583
#24 0x5632eb3b2f87 in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/simark/src/binutils-gdb/gdb/event-top.c:770
#25 0x5632eb3b0fe1 in gdb_rl_callback_handler /home/simark/src/binutils-gdb/gdb/event-top.c:213
#26 0x5632ec1c8729 in rl_callback_read_char /home/simark/src/binutils-gdb/readline/callback.c:220
#27 0x5632eb3b0b8f in gdb_rl_callback_read_char_wrapper_noexcept /home/simark/src/binutils-gdb/gdb/event-top.c:175
#28 0x5632eb3b0da1 in gdb_rl_callback_read_char_wrapper /home/simark/src/binutils-gdb/gdb/event-top.c:192
#29 0x5632eb3b2186 in stdin_event_handler(int, void*) /home/simark/src/binutils-gdb/gdb/event-top.c:511
previously allocated by thread T0 here:
#0 0x7f1d36502491 in __interceptor_realloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:105
#1 0x5632eaff9f47 in xrealloc /home/simark/src/binutils-gdb/gdb/common/common-utils.c:62
#2 0x5632eaff6b44 in buffer_grow(buffer*, char const*, unsigned long) /home/simark/src/binutils-gdb/gdb/common/buffer.c:40
#3 0x5632eb3b271d in command_line_append_input_line /home/simark/src/binutils-gdb/gdb/event-top.c:614
#4 0x5632eb3b28c6 in handle_line_of_input(buffer*, char const*, int, char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:654
#5 0x5632ebf402a6 in command_line_input(char const*, char const*) /home/simark/src/binutils-gdb/gdb/top.c:1252
#6 0x5632ebf3cee9 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:422
#7 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547
#8 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569
#9 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605
#10 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664
#11 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106
#12 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892
#13 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630
#14 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583
#15 0x5632eb3b2f87 in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/simark/src/binutils-gdb/gdb/event-top.c:770
#16 0x5632eb3b0fe1 in gdb_rl_callback_handler /home/simark/src/binutils-gdb/gdb/event-top.c:213
#17 0x5632ec1c8729 in rl_callback_read_char /home/simark/src/binutils-gdb/readline/callback.c:220
#18 0x5632eb3b0b8f in gdb_rl_callback_read_char_wrapper_noexcept /home/simark/src/binutils-gdb/gdb/event-top.c:175
#19 0x5632eb3b0da1 in gdb_rl_callback_read_char_wrapper /home/simark/src/binutils-gdb/gdb/event-top.c:192
#20 0x5632eb3b2186 in stdin_event_handler(int, void*) /home/simark/src/binutils-gdb/gdb/event-top.c:511
#21 0x5632eb3aa6a9 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733
#22 0x5632eb3aaf41 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859
#23 0x5632eb3a88ea in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:347
#24 0x5632eb3a89bf in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371
#25 0x5632eb76fbfc in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:330
#26 0x5632eb772ea8 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1176
#27 0x5632eb773071 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1192
#28 0x5632eabfe7f9 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
#29 0x7f1d3554f222 in __libc_start_main (/usr/lib/libc.so.6+0x24222)
SUMMARY: AddressSanitizer: heap-use-after-free /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors_format.inc:546 in printf_common
gdb/ChangeLog:
* top.h (source_file_name): Change to std::string.
* top.c (source_file_name): Likewise.
(command_line_input): Adjust.
* cli/cli-script.c (script_from_file): Adjust.
gdb/testsuite/ChangeLog:
* gdb.base/source.exp: Move "error in sourced script" code to
the end.
* gdb.base/source-error.gdb: Move contents to
source-error-1.gdb. Add new code to source source-error-1.gdb.
* gdb.base/source-error-1.gdb: New file, from previous
source-error.gdb.
|
|
This C++-ifies struct thread_fsm, replacing the "ops" structure with
virtual methods, and changing all the implementations to derive from
thread_fsm.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* thread.c (thread_cancel_execution_command): Update.
* thread-fsm.h (struct thread_fsm): Add constructor, destructor,
methods.
(struct thread_fsm_ops): Remove.
(thread_fsm_ctor, thread_fsm_delete, thread_fsm_clean_up)
(thread_fsm_should_stop, thread_fsm_return_value)
(thread_fsm_set_finished, thread_fsm_finished_p)
(thread_fsm_async_reply_reason, thread_fsm_should_notify_stop):
Don't declare.
* mi/mi-interp.c (mi_on_normal_stop_1): Update.
* infrun.c (clear_proceed_status_thread)
(clean_up_just_stopped_threads_fsms, fetch_inferior_event)
(print_stop_event): Update.
* infcmd.c (struct step_command_fsm): Inherit from thread_fsm.
Add constructor.
(step_command_fsm_ops): Remove.
(new_step_command_fsm): Remove.
(step_1): Update.
(step_command_fsm::should_stop): Rename from
step_command_fsm_should_stop.
(step_command_fsm::clean_up): Rename from
step_command_fsm_clean_up.
(step_command_fsm::do_async_reply_reason): Rename from
step_command_fsm_async_reply_reason.
(struct until_next_fsm): Inherit from thread_fsm. Add
constructor.
(until_next_fsm_ops): Remove.
(new_until_next_fsm): Remove.
(until_next_fsm::should_stop): Rename from
until_next_fsm_should_stop.
(until_next_fsm::clean_up): Rename from until_next_fsm_clean_up.
(until_next_fsm::do_async_reply_reason): Rename from
until_next_fsm_async_reply_reason.
(struct finish_command_fsm): Inherit from thread_fsm. Add
constructor. Change type of breakpoint.
(finish_command_fsm_ops): Remove.
(new_finish_command_fsm): Remove.
(finish_command_fsm::should_stop): Rename from
finish_command_fsm_should_stop.
(finish_command_fsm::clean_up): Rename from
finish_command_fsm_clean_up.
(finish_command_fsm::return_value): Rename from
finish_command_fsm_return_value.
(finish_command_fsm::do_async_reply_reason): Rename from
finish_command_fsm_async_reply_reason.
(finish_command): Update.
* infcall.c (struct call_thread_fsm): Inherit from thread_fsm.
Add constructor.
(call_thread_fsm_ops): Remove.
(call_thread_fsm::call_thread_fsm): Rename from
new_call_thread_fsm.
(call_thread_fsm::should_stop): Rename from
call_thread_fsm_should_stop.
(call_thread_fsm::should_notify_stop): Rename from
call_thread_fsm_should_notify_stop.
(run_inferior_call, call_function_by_hand_dummy): Update.
* cli/cli-interp.c (should_print_stop_to_console): Update.
* breakpoint.c (struct until_break_fsm): Inherit from thread_fsm.
Add constructor. Change type of location_breakpoint,
caller_breakpoint.
(until_break_fsm_ops): Remove.
(new_until_break_fsm): Remove.
(until_break_fsm::should_stop): Rename from
until_break_fsm_should_stop.
(until_break_fsm::clean_up): Rename from
until_break_fsm_clean_up.
(until_break_fsm::do_async_reply_reason): Rename from
until_break_fsm_async_reply_reason.
(until_break_command): Update.
* thread-fsm.c: Remove.
* Makefile.in (COMMON_SFILES): Remove thread-fsm.c.
|
|
While working on my other scripts to deal with gdb headers, I noticed
that some files were missing include guards. I wrote a script to add
the missing ones, but found that using the obvious names for the
guards ran into clashes -- for example, gdb/nat/linux-nat.h used
"LINUX_NAT_H", but this was also the script's choice for
gdb/linux-nat.h.
So, I changed the script to normalize all include guards in gdb. This
patch is the result.
As usual the script is available here:
https://github.com/tromey/gdb-refactoring-scripts
Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the
buildbot.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* yy-remap.h: Add include guard.
* xtensa-tdep.h: Add include guard.
* xcoffread.h: Rename include guard.
* varobj-iter.h: Add include guard.
* tui/tui.h: Rename include guard.
* tui/tui-winsource.h: Rename include guard.
* tui/tui-wingeneral.h: Rename include guard.
* tui/tui-windata.h: Rename include guard.
* tui/tui-win.h: Rename include guard.
* tui/tui-stack.h: Rename include guard.
* tui/tui-source.h: Rename include guard.
* tui/tui-regs.h: Rename include guard.
* tui/tui-out.h: Rename include guard.
* tui/tui-layout.h: Rename include guard.
* tui/tui-io.h: Rename include guard.
* tui/tui-hooks.h: Rename include guard.
* tui/tui-file.h: Rename include guard.
* tui/tui-disasm.h: Rename include guard.
* tui/tui-data.h: Rename include guard.
* tui/tui-command.h: Rename include guard.
* tic6x-tdep.h: Add include guard.
* target/waitstatus.h: Rename include guard.
* target/wait.h: Rename include guard.
* target/target.h: Rename include guard.
* target/resume.h: Rename include guard.
* target-float.h: Rename include guard.
* stabsread.h: Add include guard.
* rs6000-tdep.h: Add include guard.
* riscv-fbsd-tdep.h: Add include guard.
* regformats/regdef.h: Rename include guard.
* record.h: Rename include guard.
* python/python.h: Rename include guard.
* python/python-internal.h: Rename include guard.
* python/py-stopevent.h: Rename include guard.
* python/py-ref.h: Rename include guard.
* python/py-record.h: Rename include guard.
* python/py-record-full.h: Rename include guard.
* python/py-record-btrace.h: Rename include guard.
* python/py-instruction.h: Rename include guard.
* python/py-events.h: Rename include guard.
* python/py-event.h: Rename include guard.
* procfs.h: Add include guard.
* proc-utils.h: Add include guard.
* p-lang.h: Add include guard.
* or1k-tdep.h: Rename include guard.
* observable.h: Rename include guard.
* nto-tdep.h: Rename include guard.
* nat/x86-linux.h: Rename include guard.
* nat/x86-linux-dregs.h: Rename include guard.
* nat/x86-gcc-cpuid.h: Add include guard.
* nat/x86-dregs.h: Rename include guard.
* nat/x86-cpuid.h: Rename include guard.
* nat/ppc-linux.h: Rename include guard.
* nat/mips-linux-watch.h: Rename include guard.
* nat/linux-waitpid.h: Rename include guard.
* nat/linux-ptrace.h: Rename include guard.
* nat/linux-procfs.h: Rename include guard.
* nat/linux-osdata.h: Rename include guard.
* nat/linux-nat.h: Rename include guard.
* nat/linux-namespaces.h: Rename include guard.
* nat/linux-btrace.h: Rename include guard.
* nat/glibc_thread_db.h: Rename include guard.
* nat/gdb_thread_db.h: Rename include guard.
* nat/gdb_ptrace.h: Rename include guard.
* nat/fork-inferior.h: Rename include guard.
* nat/amd64-linux-siginfo.h: Rename include guard.
* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
* nat/aarch64-linux.h: Rename include guard.
* nat/aarch64-linux-hw-point.h: Rename include guard.
* mn10300-tdep.h: Add include guard.
* mips-linux-tdep.h: Add include guard.
* mi/mi-parse.h: Rename include guard.
* mi/mi-out.h: Rename include guard.
* mi/mi-main.h: Rename include guard.
* mi/mi-interp.h: Rename include guard.
* mi/mi-getopt.h: Rename include guard.
* mi/mi-console.h: Rename include guard.
* mi/mi-common.h: Rename include guard.
* mi/mi-cmds.h: Rename include guard.
* mi/mi-cmd-break.h: Rename include guard.
* m2-lang.h: Add include guard.
* location.h: Rename include guard.
* linux-record.h: Rename include guard.
* linux-nat.h: Add include guard.
* linux-fork.h: Add include guard.
* i386-darwin-tdep.h: Rename include guard.
* hppa-linux-offsets.h: Add include guard.
* guile/guile.h: Rename include guard.
* guile/guile-internal.h: Rename include guard.
* gnu-nat.h: Rename include guard.
* gdb-stabs.h: Rename include guard.
* frv-tdep.h: Add include guard.
* f-lang.h: Add include guard.
* event-loop.h: Add include guard.
* darwin-nat.h: Rename include guard.
* cp-abi.h: Rename include guard.
* config/sparc/nm-sol2.h: Rename include guard.
* config/nm-nto.h: Rename include guard.
* config/nm-linux.h: Add include guard.
* config/i386/nm-i386gnu.h: Rename include guard.
* config/djgpp/nl_types.h: Rename include guard.
* config/djgpp/langinfo.h: Rename include guard.
* compile/gcc-cp-plugin.h: Add include guard.
* compile/gcc-c-plugin.h: Add include guard.
* compile/compile.h: Rename include guard.
* compile/compile-object-run.h: Rename include guard.
* compile/compile-object-load.h: Rename include guard.
* compile/compile-internal.h: Rename include guard.
* compile/compile-cplus.h: Rename include guard.
* compile/compile-c.h: Rename include guard.
* common/xml-utils.h: Rename include guard.
* common/x86-xstate.h: Rename include guard.
* common/version.h: Rename include guard.
* common/vec.h: Rename include guard.
* common/tdesc.h: Rename include guard.
* common/selftest.h: Rename include guard.
* common/scoped_restore.h: Rename include guard.
* common/scoped_mmap.h: Rename include guard.
* common/scoped_fd.h: Rename include guard.
* common/safe-iterator.h: Rename include guard.
* common/run-time-clock.h: Rename include guard.
* common/refcounted-object.h: Rename include guard.
* common/queue.h: Rename include guard.
* common/ptid.h: Rename include guard.
* common/print-utils.h: Rename include guard.
* common/preprocessor.h: Rename include guard.
* common/pathstuff.h: Rename include guard.
* common/observable.h: Rename include guard.
* common/netstuff.h: Rename include guard.
* common/job-control.h: Rename include guard.
* common/host-defs.h: Rename include guard.
* common/gdb_wait.h: Rename include guard.
* common/gdb_vecs.h: Rename include guard.
* common/gdb_unlinker.h: Rename include guard.
* common/gdb_unique_ptr.h: Rename include guard.
* common/gdb_tilde_expand.h: Rename include guard.
* common/gdb_sys_time.h: Rename include guard.
* common/gdb_string_view.h: Rename include guard.
* common/gdb_splay_tree.h: Rename include guard.
* common/gdb_setjmp.h: Rename include guard.
* common/gdb_ref_ptr.h: Rename include guard.
* common/gdb_optional.h: Rename include guard.
* common/gdb_locale.h: Rename include guard.
* common/gdb_assert.h: Rename include guard.
* common/filtered-iterator.h: Rename include guard.
* common/filestuff.h: Rename include guard.
* common/fileio.h: Rename include guard.
* common/environ.h: Rename include guard.
* common/common-utils.h: Rename include guard.
* common/common-types.h: Rename include guard.
* common/common-regcache.h: Rename include guard.
* common/common-inferior.h: Rename include guard.
* common/common-gdbthread.h: Rename include guard.
* common/common-exceptions.h: Rename include guard.
* common/common-defs.h: Rename include guard.
* common/common-debug.h: Rename include guard.
* common/cleanups.h: Rename include guard.
* common/buffer.h: Rename include guard.
* common/btrace-common.h: Rename include guard.
* common/break-common.h: Rename include guard.
* cli/cli-utils.h: Rename include guard.
* cli/cli-style.h: Rename include guard.
* cli/cli-setshow.h: Rename include guard.
* cli/cli-script.h: Rename include guard.
* cli/cli-interp.h: Rename include guard.
* cli/cli-decode.h: Rename include guard.
* cli/cli-cmds.h: Rename include guard.
* charset-list.h: Add include guard.
* buildsym-legacy.h: Rename include guard.
* bfin-tdep.h: Add include guard.
* ax.h: Rename include guard.
* arm-linux-tdep.h: Add include guard.
* arm-fbsd-tdep.h: Add include guard.
* arch/xtensa.h: Rename include guard.
* arch/tic6x.h: Add include guard.
* arch/i386.h: Add include guard.
* arch/arm.h: Rename include guard.
* arch/arm-linux.h: Rename include guard.
* arch/arm-get-next-pcs.h: Rename include guard.
* arch/amd64.h: Add include guard.
* arch/aarch64-insn.h: Rename include guard.
* arch-utils.h: Rename include guard.
* annotate.h: Add include guard.
* amd64-darwin-tdep.h: Rename include guard.
* aarch64-linux-tdep.h: Add include guard.
* aarch64-fbsd-tdep.h: Add include guard.
* aarch32-linux-nat.h: Add include guard.
gdb/gdbserver/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* x86-tdesc.h: Rename include guard.
* x86-low.h: Add include guard.
* wincecompat.h: Rename include guard.
* win32-low.h: Add include guard.
* utils.h: Rename include guard.
* tracepoint.h: Rename include guard.
* tdesc.h: Rename include guard.
* target.h: Rename include guard.
* server.h: Rename include guard.
* remote-utils.h: Rename include guard.
* regcache.h: Rename include guard.
* nto-low.h: Rename include guard.
* notif.h: Add include guard.
* mem-break.h: Rename include guard.
* lynx-low.h: Add include guard.
* linux-x86-tdesc.h: Add include guard.
* linux-s390-tdesc.h: Add include guard.
* linux-ppc-tdesc-init.h: Add include guard.
* linux-low.h: Add include guard.
* linux-aarch64-tdesc.h: Add include guard.
* linux-aarch32-low.h: Add include guard.
* inferiors.h: Rename include guard.
* i387-fp.h: Rename include guard.
* hostio.h: Rename include guard.
* gdbthread.h: Rename include guard.
* gdb_proc_service.h: Rename include guard.
* event-loop.h: Rename include guard.
* dll.h: Rename include guard.
* debug.h: Rename include guard.
* ax.h: Rename include guard.
|
|
This changes all includes to use the form "common/filename.h" rather
than just "filename.h". This was written by a script.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* xtensa-linux-nat.c: Fix common/ includes.
* xml-support.h: Fix common/ includes.
* xml-support.c: Fix common/ includes.
* x86-linux-nat.c: Fix common/ includes.
* windows-nat.c: Fix common/ includes.
* varobj.h: Fix common/ includes.
* varobj.c: Fix common/ includes.
* value.c: Fix common/ includes.
* valops.c: Fix common/ includes.
* utils.c: Fix common/ includes.
* unittests/xml-utils-selftests.c: Fix common/ includes.
* unittests/utils-selftests.c: Fix common/ includes.
* unittests/unpack-selftests.c: Fix common/ includes.
* unittests/tracepoint-selftests.c: Fix common/ includes.
* unittests/style-selftests.c: Fix common/ includes.
* unittests/string_view-selftests.c: Fix common/ includes.
* unittests/scoped_restore-selftests.c: Fix common/ includes.
* unittests/scoped_mmap-selftests.c: Fix common/ includes.
* unittests/scoped_fd-selftests.c: Fix common/ includes.
* unittests/rsp-low-selftests.c: Fix common/ includes.
* unittests/parse-connection-spec-selftests.c: Fix common/
includes.
* unittests/optional-selftests.c: Fix common/ includes.
* unittests/offset-type-selftests.c: Fix common/ includes.
* unittests/observable-selftests.c: Fix common/ includes.
* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
* unittests/memrange-selftests.c: Fix common/ includes.
* unittests/memory-map-selftests.c: Fix common/ includes.
* unittests/lookup_name_info-selftests.c: Fix common/ includes.
* unittests/function-view-selftests.c: Fix common/ includes.
* unittests/environ-selftests.c: Fix common/ includes.
* unittests/copy_bitwise-selftests.c: Fix common/ includes.
* unittests/common-utils-selftests.c: Fix common/ includes.
* unittests/cli-utils-selftests.c: Fix common/ includes.
* unittests/array-view-selftests.c: Fix common/ includes.
* ui-file.c: Fix common/ includes.
* tui/tui-io.c: Fix common/ includes.
* tracepoint.h: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* tracefile-tfile.c: Fix common/ includes.
* top.h: Fix common/ includes.
* top.c: Fix common/ includes.
* thread.c: Fix common/ includes.
* target/waitstatus.h: Fix common/ includes.
* target/waitstatus.c: Fix common/ includes.
* target.h: Fix common/ includes.
* target.c: Fix common/ includes.
* target-memory.c: Fix common/ includes.
* target-descriptions.c: Fix common/ includes.
* symtab.h: Fix common/ includes.
* symfile.c: Fix common/ includes.
* stap-probe.c: Fix common/ includes.
* spu-linux-nat.c: Fix common/ includes.
* sparc-nat.c: Fix common/ includes.
* source.c: Fix common/ includes.
* solib.c: Fix common/ includes.
* solib-target.c: Fix common/ includes.
* ser-unix.c: Fix common/ includes.
* ser-tcp.c: Fix common/ includes.
* ser-pipe.c: Fix common/ includes.
* ser-base.c: Fix common/ includes.
* selftest-arch.c: Fix common/ includes.
* s12z-tdep.c: Fix common/ includes.
* rust-exp.y: Fix common/ includes.
* rs6000-aix-tdep.c: Fix common/ includes.
* riscv-tdep.c: Fix common/ includes.
* remote.c: Fix common/ includes.
* remote-notif.h: Fix common/ includes.
* remote-fileio.h: Fix common/ includes.
* remote-fileio.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* record-btrace.c: Fix common/ includes.
* python/python.c: Fix common/ includes.
* python/py-type.c: Fix common/ includes.
* python/py-inferior.c: Fix common/ includes.
* progspace.h: Fix common/ includes.
* producer.c: Fix common/ includes.
* procfs.c: Fix common/ includes.
* proc-api.c: Fix common/ includes.
* printcmd.c: Fix common/ includes.
* ppc-linux-nat.c: Fix common/ includes.
* parser-defs.h: Fix common/ includes.
* osdata.c: Fix common/ includes.
* obsd-nat.c: Fix common/ includes.
* nat/x86-linux.c: Fix common/ includes.
* nat/x86-linux-dregs.c: Fix common/ includes.
* nat/x86-dregs.h: Fix common/ includes.
* nat/x86-dregs.c: Fix common/ includes.
* nat/ppc-linux.c: Fix common/ includes.
* nat/mips-linux-watch.h: Fix common/ includes.
* nat/mips-linux-watch.c: Fix common/ includes.
* nat/linux-waitpid.c: Fix common/ includes.
* nat/linux-ptrace.h: Fix common/ includes.
* nat/linux-ptrace.c: Fix common/ includes.
* nat/linux-procfs.c: Fix common/ includes.
* nat/linux-personality.c: Fix common/ includes.
* nat/linux-osdata.c: Fix common/ includes.
* nat/linux-namespaces.c: Fix common/ includes.
* nat/linux-btrace.h: Fix common/ includes.
* nat/linux-btrace.c: Fix common/ includes.
* nat/fork-inferior.c: Fix common/ includes.
* nat/amd64-linux-siginfo.c: Fix common/ includes.
* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
* nat/aarch64-linux.c: Fix common/ includes.
* nat/aarch64-linux-hw-point.h: Fix common/ includes.
* nat/aarch64-linux-hw-point.c: Fix common/ includes.
* namespace.h: Fix common/ includes.
* mips-linux-tdep.c: Fix common/ includes.
* minsyms.c: Fix common/ includes.
* mi/mi-parse.h: Fix common/ includes.
* mi/mi-main.c: Fix common/ includes.
* mi/mi-cmd-env.c: Fix common/ includes.
* memrange.h: Fix common/ includes.
* memattr.c: Fix common/ includes.
* maint.h: Fix common/ includes.
* maint.c: Fix common/ includes.
* main.c: Fix common/ includes.
* machoread.c: Fix common/ includes.
* location.c: Fix common/ includes.
* linux-thread-db.c: Fix common/ includes.
* linux-nat.c: Fix common/ includes.
* linux-fork.c: Fix common/ includes.
* inline-frame.c: Fix common/ includes.
* infrun.c: Fix common/ includes.
* inflow.c: Fix common/ includes.
* inferior.h: Fix common/ includes.
* inferior.c: Fix common/ includes.
* infcmd.c: Fix common/ includes.
* inf-ptrace.c: Fix common/ includes.
* inf-child.c: Fix common/ includes.
* ia64-linux-nat.c: Fix common/ includes.
* i387-tdep.c: Fix common/ includes.
* i386-tdep.c: Fix common/ includes.
* i386-linux-tdep.c: Fix common/ includes.
* i386-linux-nat.c: Fix common/ includes.
* i386-go32-tdep.c: Fix common/ includes.
* i386-fbsd-tdep.c: Fix common/ includes.
* i386-fbsd-nat.c: Fix common/ includes.
* guile/scm-type.c: Fix common/ includes.
* guile/guile.c: Fix common/ includes.
* go32-nat.c: Fix common/ includes.
* gnu-nat.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbarch-selftests.c: Fix common/ includes.
* gdb_usleep.c: Fix common/ includes.
* gdb_select.h: Fix common/ includes.
* gdb_bfd.c: Fix common/ includes.
* gcore.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* findvar.c: Fix common/ includes.
* fbsd-nat.c: Fix common/ includes.
* event-top.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* dwarf2read.c: Fix common/ includes.
* dwarf2loc.c: Fix common/ includes.
* dwarf2-frame.c: Fix common/ includes.
* dwarf-index-cache.c: Fix common/ includes.
* dtrace-probe.c: Fix common/ includes.
* disasm-selftests.c: Fix common/ includes.
* defs.h: Fix common/ includes.
* csky-tdep.c: Fix common/ includes.
* cp-valprint.c: Fix common/ includes.
* cp-support.h: Fix common/ includes.
* cp-support.c: Fix common/ includes.
* corelow.c: Fix common/ includes.
* completer.h: Fix common/ includes.
* completer.c: Fix common/ includes.
* compile/compile.c: Fix common/ includes.
* compile/compile-loc2c.c: Fix common/ includes.
* compile/compile-cplus-types.c: Fix common/ includes.
* compile/compile-cplus-symbols.c: Fix common/ includes.
* command.h: Fix common/ includes.
* cli/cli-dump.c: Fix common/ includes.
* cli/cli-cmds.c: Fix common/ includes.
* charset.c: Fix common/ includes.
* build-id.c: Fix common/ includes.
* btrace.h: Fix common/ includes.
* btrace.c: Fix common/ includes.
* breakpoint.h: Fix common/ includes.
* breakpoint.c: Fix common/ includes.
* ax.h:
(enum agent_op): Fix common/ includes.
* ax-general.c (struct aop_map): Fix common/ includes.
* ax-gdb.c: Fix common/ includes.
* auxv.c: Fix common/ includes.
* auto-load.c: Fix common/ includes.
* arm-tdep.c: Fix common/ includes.
* arch/riscv.c: Fix common/ includes.
* arch/ppc-linux-common.c: Fix common/ includes.
* arch/i386.c: Fix common/ includes.
* arch/arm.c: Fix common/ includes.
* arch/arm-linux.c: Fix common/ includes.
* arch/arm-get-next-pcs.c: Fix common/ includes.
* arch/amd64.c: Fix common/ includes.
* arch/aarch64.c: Fix common/ includes.
* arch/aarch64-insn.c: Fix common/ includes.
* arch-utils.c: Fix common/ includes.
* amd64-windows-tdep.c: Fix common/ includes.
* amd64-tdep.c: Fix common/ includes.
* amd64-sol2-tdep.c: Fix common/ includes.
* amd64-obsd-tdep.c: Fix common/ includes.
* amd64-nbsd-tdep.c: Fix common/ includes.
* amd64-linux-tdep.c: Fix common/ includes.
* amd64-linux-nat.c: Fix common/ includes.
* amd64-fbsd-tdep.c: Fix common/ includes.
* amd64-fbsd-nat.c: Fix common/ includes.
* amd64-dicos-tdep.c: Fix common/ includes.
* amd64-darwin-tdep.c: Fix common/ includes.
* agent.c: Fix common/ includes.
* ada-lang.h: Fix common/ includes.
* ada-lang.c: Fix common/ includes.
* aarch64-tdep.c: Fix common/ includes.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* win32-low.c: Fix common/ includes.
* win32-i386-low.c: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* thread-db.c: Fix common/ includes.
* target.h: Fix common/ includes.
* symbol.c: Fix common/ includes.
* spu-low.c: Fix common/ includes.
* server.h: Fix common/ includes.
* server.c: Fix common/ includes.
* remote-utils.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* nto-x86-low.c: Fix common/ includes.
* notif.h: Fix common/ includes.
* mem-break.h: Fix common/ includes.
* lynx-low.c: Fix common/ includes.
* lynx-i386-low.c: Fix common/ includes.
* linux-x86-tdesc-selftest.c: Fix common/ includes.
* linux-x86-low.c: Fix common/ includes.
* linux-low.c: Fix common/ includes.
* inferiors.h: Fix common/ includes.
* i387-fp.c: Fix common/ includes.
* hostio.c: Fix common/ includes.
* hostio-errno.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbreplay.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* ax.c:
(enum gdb_agent_op): Fix common/ includes.
|
|
I wrote a little script to detect duplicate or commented-out #includes
and ran it on gdb. This patch is the result. Tested by rebuilding.
gdb/ChangeLog
2019-01-21 Tom Tromey <tom@tromey.com>
* ui-out.c: Fix includes.
* tui/tui-source.c: Fix includes.
* target.c: Fix includes.
* remote.c: Fix includes.
* regcache.c: Fix includes.
* python/py-block.c: Fix includes.
* printcmd.c: Fix includes.
* or1k-tdep.c: Fix includes.
* mi/mi-main.c: Fix includes.
* m32r-tdep.c: Fix includes.
* csky-tdep.c: Fix includes.
* compile/compile-cplus-types.c: Fix includes.
* cli/cli-interp.c: Fix includes.
gdb/gdbserver/ChangeLog
2019-01-21 Tom Tromey <tom@tromey.com>
* tracepoint.c: Fix includes.
* remote-utils.c: Fix includes.
* linux-x86-low.c: Fix includes.
gdb/stubs/ChangeLog
2019-01-21 Tom Tromey <tom@tromey.com>
* ia64vms-stub.c: Fix includes.
|
|
Currently, the behaviour is:
(gdb) show style
(gdb) set style
(gdb) show style address
(gdb) set style address
(gdb)
With this patch, the behaviour is:
(gdb) show style
style address background: The "address" background color is: none
style address foreground: The "address" foreground color is: blue
style address intensity: The "address" display intensity is: normal
enabled: CLI output styling is enabled.
style filename background: The "filename" background color is: none
style filename foreground: The "filename" foreground color is: green
style filename intensity: The "filename" display intensity is: normal
style function background: The "function" background color is: none
style function foreground: The "function" foreground color is: yellow
style function intensity: The "function" display intensity is: normal
style variable background: The "variable" background color is: none
style variable foreground: The "variable" foreground color is: cyan
style variable intensity: The "variable" display intensity is: normal
(gdb) set style
"set style" must be followed by an appropriate subcommand.
List of set style subcommands:
set style address -- Address display styling
set style enabled -- Set whether CLI styling is enabled
set style filename -- Filename display styling
set style function -- Function name display styling
set style variable -- Variable name display styling
Type "help set style" followed by set style subcommand name for full documentation.
Type "apropos word" to search for commands related to "word".
Command name abbreviations are allowed if unambiguous.
(gdb) show style address
background: The "filename" background color is: none
foreground: The "filename" foreground color is: green
intensity: The "filename" display intensity is: normal
(gdb) set style address
List of set style address subcommands:
set style address background -- Set the background color for this property
set style address foreground -- Set the foreground color for this property
set style address intensity -- Set the display intensity color for this property
Type "help set style address" followed by set style address subcommand name for full documentation.
Type "apropos word" to search for commands related to "word".
Command name abbreviations are allowed if unambiguous.
(gdb)
gdb/ChangeLog
* cli/cli-style.h (class cli_style_option): <add_setshow_commands>
Remove arg prefixname, add do_set and do_show.
Add member functions set_list and show_list.
* cli/cli-style.c (class cli_style_option): Update accordingly.
(style_set_list): Move to file scope.
(style_show_list): Likewise.
(set_style): Call help_list.
(show_style): Call cmd_show_list.
(_initialize_cli_style): New macro STYLE_ADD_SETSHOW_COMMANDS.
Update to use the new macro.
|
|
When printing source lines with calls to print_source_lines we need to
pass a start line number and an end line number. The end line number
is calculated by calling get_lines_to_list and adding this value to
the start line number. For example this code from list_command:
print_source_lines (cursal.symtab, first,
first + get_lines_to_list (), 0);
The problem is that get_lines_to_list returns a value based on the
GDB setting `set listsize LISTSIZE`. By default LISTSIZE is 10,
however, its also possible to set LISTSIZE to unlimited, in which
case get_lines_to_list will return INT_MAX.
As the parameter signature for print_source_lines is:
void print_source_lines (struct symtab *, int, int,
print_source_lines_flags);
and `first` in the above code is an `int`, then when LISTSIZE is
`unlimited` the above code will result in signed integer overflow,
which is undefined.
The solution in this patch is a new class source_lines_range that can
be constructed from a single line number and a direction (forward or
backward). The range is then constructed from the line number and the
value of get_lines_to_list.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Pass a source_lines_range to
print_source_lines.
* source.c (print_source_lines_base): Update line number check.
(print_source_lines): New function.
(source_lines_range::source_lines_range): New function.
* source.h (class source_lines_range): New class.
(print_source_lines): New declaration.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
The layout for 'help set address|variable' is strange, e.g.:
(gdb) help set style address
style address
List of show Address display styling
Configure address colors and display intensity subcommands:
show Address display styling
Configure address colors and display intensity background -- Set the background color for this property
show Address display styling
Configure address colors and display intensity foreground -- Set the foreground color for this property
show Address display styling
Configure address colors and display intensity intensity -- Set the display intensity color for this property
Type "help show Address display styling
Configure address colors and display intensity" followed by show Address display styling
Configure address colors and display intensity subcommand name for full documentation.
Type "apropos word" to search for commands related to "word".
Command name abbreviations are allowed if unambiguous.
(gdb)
The help for 'set style function|filename' gives help for 'Show':
(gdb) help set style filename
Filename display styling
Configure filename colors and display intensity.
List of show style filename subcommands:
show style filename background -- Set the background color for this property
show style filename foreground -- Set the foreground color for this property
show style filename intensity -- Set the display intensity color for this property
The help for 'show style function|filename' is equally strange, as it speaks
about commands, instead of sub commands:
(gdb) help show style filename
Filename display styling
Configure filename colors and display intensity.
List of commands:
background -- Show the background color for this property
foreground -- Show the foreground color for this property
intensity -- Show the display intensity color for this property
Type "help" followed by command name for full documentation.
Type "apropos word" to search for commands related to "word".
Command name abbreviations are allowed if unambiguous.
(gdb)
This patch fixes all this.
Note that the 'set style' and 'show style' have the same prefix_doc:
(gdb) help show style
Style-specific settings
Configure various style-related variables, such as colors
...
(gdb) help set style
Style-specific settings
Configure various style-related variables, such as colors
...
Other similar commands (such as set|show history) have typically
a more specific prefix:
(gdb) help show history
Generic command for showing command history parameters.
...
(gdb) help set history
Generic command for setting command history parameters.
...
This could be fixed by having set_prefix_doc and show_prefix_doc instead of
the single prefix_doc argument to cli_style_option::add_setshow_commands.
That could be improved if deemed better.
2018-12-29 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-style.c (cli_style_option::add_setshow_commands):
Initialize m_set_prefix with "set", instead of re-assigning
m_show_prefix. Use m_set_prefix for set_list and m_show_prefix
for show_list.
(_initialize_cli_style): Correct the order of arguments in
variable_name_style.add_setshow_commands and
address_style.add_setshow_commands calls.
|
