| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PR gdb/10462
* cli/cli-decode.c (lookup_command): Show an error if there is no space
before argument.
2013-04-24 Muhammad Bilal <mbilal@codesourcery.com>
PR gdb/10462
* gdb.base/setshow.exp: Add test case.
|
|
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
|
|
* top.c (print_gdb_configuration): New function, displays the
details about GDB configure-time parameters.
(print_gdb_version): Mention "show configuration".
* cli/cli-cmds.c (show_configuration): New function.
(_initialize_cli_cmds): Add the "show configuration" command.
* main.c (captured_main) <print_configuration>: New static var.
<long_options>: Use it.
If --configuration was given, call print_gdb_configuration.
* doc/gdb.texinfo (Mode Options): Document '-configuration'.
(Help): Document "show configuration".
(Bug Reporting): Add requirements to include the configuration
details in bug reports.
|
|
Currently, several commands take "0" or "-1" to mean "unlimited".
"show" knows when to print "unlimited":
(gdb) show height
Number of lines gdb thinks are in a page is 45.
(gdb) set height 0
(gdb) show height
Number of lines gdb thinks are in a page is unlimited.
However, the user can't herself specify "unlimited" directly:
(gdb) set height unlimited
No symbol table is loaded. Use the "file" command.
(gdb)
This patch addresses that, by adjusting the set handler for all
integer/uinteger/zuinteger_unlimited commands to accept literal
"unlimited". It also installs a completer. Presently, we complete on
symbols by default, and at
<http://sourceware.org/ml/gdb-patches/2013-03/msg00864.html> I've
shown a WIP prototype that tried to keep that half working in these
commands. In the end, it turned out to be more complicated than
justifiable, IMO. It's super rare to want to pass the value of a
variable/symbol in the program to a GDB set/show knob. That'll still
work, it's just that we won't assist with completion anymore. This
patch just sticks with the simple, and completes on "unlimited", and
nothing else. This simplification means that
"set he<tab><tab>"
is all it takes to get to:
"set height unlimited"
The patch then goes through all integer/uinteger/zuinteger_unlimited
commands in the tree, and updates both the online help and the manual
to mention that "unlimited" is accepted in addition to 0/-1. In the
cases where the command had no online help text at all, this adds it.
I've tried to make the texts read in a way that "unlimited" is
suggested before "0" or "-1" is.
Tested on x86_64 Fedora 17.
gdb/
2013-04-10 Pedro Alves <palves@redhat.com>
* cli/cli-decode.c (integer_unlimited_completer): New function.
(add_setshow_integer_cmd, add_setshow_uinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
completer.
* cli/cli-setshow.c: Include "cli/cli-utils.h".
(is_unlimited_literal): New function.
(do_set_command): Handle literal "unlimited" arguments.
* frame.c (_initialize_frame) <set backtrace limit>: Document
"unlimited".
* printcmd.c (_initialize_printcmd) <set print
max-symbolic-offset>: Add help text.
* record-full.c (_initialize_record_full) <set record full
insn-number-max>: Likewise.
* record.c (_initialize_record) <set record
instruction-history-size, set record function-call-history-size>:
Add help text.
* ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
help text.
* tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
Likewise.
* source.c (_initialize_source) <set listsize>: Add help text.
* utils.c (initialize_utils) <set height, set width>: Likewise.
<set pagination>: Mention "set height unlimited".
* valprint.c (_initialize_valprint) <set print elements, set print
repeats>: Document "unlimited".
gdb/doc/
2013-04-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Process Record and Replay): Document that "set
record full insn-number-max", "set record
instruction-history-size" and "set record
function-call-history-size" accept "unlimited".
(Backtrace): Document that "set backtrace limit" accepts
"unlimited".
(List): Document that "set listsize" accepts "unlimited".
(Print Settings)" Document that "set print max-symbolic-offset",
"set print elements" and "set print repeats" accept "unlimited".
(Starting and Stopping Trace Experiments): Document that "set
trace-buffer-size" accepts "unlimited".
(Remote Configuration): Document that "set tcp connect-timeout"
accepts "unlimited".
(Command History): Document that "set history size" accepts
"unlimited".
(Screen Size): Document that "set height" and "set width" accepts
"unlimited". Adjust "set pagination"'s description to suggest
"set height unlimited" instead of "set height 0".
gdb/testsuite/
2013-04-10 Pedro Alves <palves@redhat.com>
* gdb.base/completion.exp: Test "set height", "set listsize" and
"set trace-buffer-size" completion.
* gdb.base/setshow.exp: Test "set height unlimited".
* gdb.trace/trace-buffer-size.exp: Test "set trace-buffer-size
unlimited".
|
|
target errors on "quit"
Gareth mentions in PR gdb/15275:
"The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing()
and therefore exits correctly."
It should, so to get out of tfind mode, as quit may detach instead of
kill, and we don't want to confuse the memory/register accesses
etc. of the detach process. So we should push down the disconnect
tracing bits at least to quit_force. But we can't as is, as that
would swallow the error thrown by answering "no" to:
Trace is running but will stop on detach; detach anyway? (y or n)
So to address that, we split disconnect_tracing in two. One part that
does the query, and another part that does the rest, and we make
quit_force call the latter.
Looking at quit_force, it does several things, some of which are a bit
independent of the others. It first kills/detaches, and then writes
history, and then runs the final cleanups. It seems better to me to
do each of these things even if the previous thing throws. E.g., as
is, if something throws while detaching, then we skip writing history.
Tested on x86_64 Fedora 17.
gdb/
2013-04-10 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (quit_command): Call query_if_trace_running
instead of disconnect_tracing.
* infcmd.c (detach_command, disconnect_command): Call
query_if_trace_running. Adjust.
* top.c: Include "tracepoint.h".
(quit_target): Delete. Contents moved ...
(quit_force): ... here. Wrap each stage of teardown in
TRY_CATCH. Call disconnect_tracing before detaching.
|
|
The range validation added by
http://sourceware.org/ml/gdb-patches/2013-03/msg00767.html
Changes things to allow setting the command to INT_MAX or UINT_MAX
directly, with signed and unsigned commands respectively. However,
that went a little bit too far, as in the cases of var_integer and
var_uinteger, those values are actually implementation detail. It's
better to not expose them in the interface, and have users assume
those values mean "unlimited" too, so to be safer to expand the range
of the commands in the future if we want to. Yes, it's pedantic, and
it's not likely users actually will do this, but MI frontends and
Python scripts might.
gdb/
2013-03-22 Pedro Alves <palves@redhat.com>
Yao Qi <yao@codesourcery.com>
Mark Kettenis <kettenis@gnu.org>
* cli/cli-setshow.c (do_set_command) <var_uinteger>:
Don't let the user set the value to UINT_MAX directly.
<var_integer>: Don't let the user set the value to INT_MAX
directly.
|
|
|
|
The range validation added by
http://sourceware.org/ml/gdb-patches/2013-03/msg00767.html
Changes things to allow setting the command to INT_MAX or UINT_MAX
directly, with signed and unsigned commands respectively. However,
that went a little bit too far, as in the cases of var_integer and
var_uinteger, those values are actually implementation detail. It's
better to not expose them in the interface, and have users assume
those values mean "unlimited" too, so to be safer to expand the range
of the commands in the future if we want to. Yes, it's pedantic, and
it's not likely users actually will do this, but MI frontends and
Python scripts might.
gdb/
2013-03-22 Pedro Alves <palves@redhat.com>
Yao Qi <yao@codesourcery.com>
Mark Kettenis <kettenis@gnu.org>
* cli/cli-setshow.c (do_set_command) <var_uinteger>:
Don't let the user set the value to UINT_MAX directly.
<var_integer>: Don't let the user set the value to INT_MAX
directly.
|
|
* NEWS: Add entry.
* event-top.c: #include "maint.h".
* main.c: #include "maint.h".
* maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
timeval-utils.h, maint.h, cli/cli-setshow.h.
(per_command_time, per_command_space): New static globals.
(per_command_symtab): New static global.
(per_command_setlist, per_command_showlist): New static globals.
(struct cmd_stats): Move here from utils.c.
(set_per_command_time): Renamed from set_display_time in utils.c
and moved here. All callers updated.
(set_per_command_space): Renamed from set_display_space in utils.c
and moved here. All callers updated.
(count_symtabs_and_blocks): New function.
(report_command_stats): Moved here from utils.c. Add support for
printing symtab stats. Only print data if enabled before command
executed.
(make_command_stats_cleanup): Ditto.
(sert_per_command_cmd, show_per_command_cmd): New functions.
(_initialize_maint_cmds): Add new commands
mt set per-command {space,time,symtab} {on,off}.
* maint.h: New file.
* top.c: #include "maint.h".
* utils.c (reset_prompt_for_continue_wait_time): New function.
(get_prompt_for_continue_wait_time): New function.
* utils.h (reset_prompt_for_continue_wait_time): Declare
(get_prompt_for_continue_wait_time): Declare.
(make_command_stats_cleanup): Moved to maint.h.
(set_display_time, set_display_space): Moved to maint.h and renamed
to set_per_command_time, set_per_command_space.
* cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
parse_binary_operation and made non-static. Don't call error,
just return an error marker. All callers updated.
* cli/cli-setshow.h (parse_cli_boolean_value): Declare.
doc/
* gdb.texinfo (Maintenance Commands): Add docs for
"mt set per-command {space,time,symtab} {on,off}".
testsuite/
* gdb.base/maint.exp: Update tests for per-command stats.
|
|
commands)
This is a regression from 7.5, introduced/exposed by:
http://sourceware.org/ml/gdb-patches/2012-07/msg00259.html
There are a series of issues with this code.
It does:
unsigned int val = parse_and_eval_long (arg);
^^^^^^^^^^^^
(unsigned, usually 32-bit) while parse_and_eval_long returns a LONGEST
(usually 64-bit), so we lose precision without noticing:
(gdb) set remote hardware-watchpoint-limit 0x100000000
(gdb) show remote hardware-watchpoint-limit 0x100000000
The maximum number of target hardware watchpoints is 0.
While at it, print the invalid number with plongest, so the user sees
what GDB thought the number was:
(gdb) set remote hardware-watchpoint-limit 0x100000000
integer 4294967296 out of range
So with "set remote hardware-watchpoint-limit -1", val ends converted
to 0xffffffff, which then fails the
else if (val >= INT_MAX)
error (_("integer %u out of range"), val);
test.
Looking at that INT_MAX check, we forbid INT_MAX itself, but we
shouldn't, as that does fit in 'int' -- we want to forbid values
_greater_ than INT_MAX (and less than INT_MIN, while at it):
(gdb) set remote hardware-watchpoint-limit 2147483647
integer 2147483647 out of range
The same problem is in the new var_zuinteger_unlimited code, which
also uses "int" for variable.
Also, when printing a 'signed int', we should use %d, not %u.
This adds a couple regression tests. Not completely thorough in checking
all kinds of invalid input; I'm saving more exaustive testing around
zXXinteger commands for something like new test-assisting commands
like "maint test cmd-zinteger -1", where testing would focus on the
command types, and thus be independent of particular user commands of
particular GDB features.
Tested on x86_64 Fedora 17.
gdb/
2013-03-20 Pedro Alves <palves@redhat.com>
PR gdb/15289
* cli/cli-setshow.c (do_set_command)
<var_uinteger, var_zuinteger>: Use LONGEST for variable holding
the result of parsing the command argument. Throw error if the
value is greater than UINT_MAX. Print the invalid value with
plongest.
<var_integer, var_zinteger>: Use LONGEST for variable holding the
result of parsing the command argument. Throw error if the value
is greater than INT_MAX, not greater or equal. Also throw error
if the value is less than INT_MIN. Print the invalid value with
plongest.
<var_zuinteger_unlimited>: Throw error if the value is greater
than INT_MAX, not greater or equal.
(do_show_command) <var_integer, var_zinteger,
var_zuinteger_unlimited>: Use %d for printing int, not %u.
gdb/testsuite/
2013-03-20 Pedro Alves <palves@redhat.com>
PR gdb/15289
* gdb.base/remote.exp: Test
"set remote hardware-watchpoint-limit -1",
"set remote hardware-breakpoint-limit -1",
"set remote hardware-watchpoint-limit 2147483647" and
"set remote hardware-breakpoint-limit 2147483647".
|
|
This is sort of a continuation of Keith's parse_exp_1 constification
patch. It started out by undoing these bits:
@@ -754,9 +754,12 @@ validate_actionline (char **line, struct
tmp_p = p;
for (loc = t->base.loc; loc; loc = loc->next)
{
- p = tmp_p;
- exp = parse_exp_1 (&p, loc->address,
+ const char *q;
+
+ q = tmp_p;
+ exp = parse_exp_1 (&q, loc->address,
block_for_pc (loc->address), 1);
+ p = (char *) q;
and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).
That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.
I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.
I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.
The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-03-13 Pedro Alves <palves@redhat.com>
* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const. Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust. No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg". New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char. Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c". Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char. Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this. Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg". New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const. Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const. Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const. Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust. Don't frob the action string while splitting
it at commas. Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.
|
|
pointer to expression string to parse_exp_1.
(create_excep_cond_exprs): Likewise.
* ax-gdb.c (agent_eval_command_one): Likewise.
(maint_agent_printf_command): Likewise.
Constify much of the string handling/parsing.
* breakpoint.c (set_breakpoint_condition): Pass const
pointer to expression string to parse_exp_1.
(update_watchpoint): Likewise.
(parse_cmd_to_aexpr): Constify string handling.
Pass const pointer to parse_exp_1.
(init_breakpoint_sal): Pass const pointer to parse_exp_1.
(find_condition_and_thread): Likewise.
Make TOK const.
(watch_command_1): Make "arg" const.
Constify string handling.
Copy the expression string instead of changing the input
string.
(update_breakpoint_location): Pass const pointer to
parse_exp_1.
* eval.c (parse_and_eval_address): Make "exp" const.
(parse_to_comma_and_eval): Make "expp" const.
(parse_and_eval): Make "exp" const.
* expression.h (parse_expression): Make argument const.
(parse_exp_1): Make first argument const.
* findcmd.c (parse_find_args): Treat "args" as const.
* linespec.c (parse_linespec): Pass const pointer to
linespec_expression_to_pc.
(linespec_expression_to_pc): Make "exp_ptr" const.
* parse.c (parse_exp_1): Make "stringptr" const.
Make a copy of the expression to pass to parse_exp_in_context until
this whole interface can be constified.
(parse_expression): Make "string" const.
* printcmd.c (ui_printf): Treat "arg" as const.
Handle const strings.
* tracepoint.c (validate_actionline): Pass const pointer to
all calls to parse_exp_1.
(encode_actions_1): Likewise.
* value.h (parse_to_comma_and_eval): Make argument const.
(parse_and_eval_address): Likewise.
(parse_and_eval): Likewise.
* varobj.c (varobj_create): Pass const pointer to parse_exp_1.
(varobj_set_value): Likewise.
* cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
constify string handling.
Pass const pointers to parse_and_eval_address and
parse_to_comman_and_eval.
* cli/cli-utils.c (skip_to_space): Rename to ...
(skip_to_space_const): ... this. Handle const strings.
* cli/cli-utils.h (skip_to_space): Turn into macro which invokes
skip_to_space_const.
(skip_to_space_const): Declare.
* common/format.c (parse_format_string): Make "arg" const.
Handle const strings.
* common/format.h (parse_format_string): Make "arg" const.
* gdbserver/ax.c (ax_printf): Make "format" const.
* python/python.c (gdbpy_parse_and_eval): Do not make a copy
of the expression string.
|
|
(trace_pass_command): Likewise.
* cli/cli-cmds.c: Include cli/cli-utils.h.
(source_command): Use skip-spaces.
(disassemble_command): Likewise.
* findcmd.c: Include cli/cli-utils.h.
(parse_find_args): Use skip_spaces.
* go32-nat.c: Include cli/cli-utils.h.
(go32_sldt): Use skip_spaces.
(go32_sgdt): Likewise.
(go32_sidt): Likewise.
(go32_pde): Likewise.
(go32_pte): Likewise.
(go32_pte_for_address): Likewise.
* infcmd.c: Include cli/cli-utils.h.
(registers_info): Use skip_spaces.
* linux-tdep.c (read_mapping): Use skip_spaces_const.
(linux_info_proc): Likewise.
* linux-thread-db.c: Include cli/cli-utils.h.
(info_auto_load_libthread_db): Use skip_spaces_const.
* m32r-rom.c: Include cli/cli-utils.h.
(m32r_upload_command): Use skip_spaces.
* maint.c: Include cli/cli-utils.h.
(maintenance_translate_address): Use skip_spaces.
* mi/mi-parse.c: Include cli/cli-utils.h.
(mi_parse_argv): Use skip_spaces.
(mi_parse): Likewise.
* minsyms.c: Include cli/cli-utils.h.
(msymbol_hash_iw): Use skip_spaces_const.
* objc-lang.c: Include cli/cli-utils.h.
(parse_selector): Use skip_spaces.
(parse_method): Likewise.
* python/python.c: Include cli/cli-utils.h.
(python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
(python_command)[HAVE_PYTHON]: Likewise.
(python_interactive_command)[!HAVE_PYTHON]: Likewise.
* remote-m32r-sdi.c: Include cli/cli-utils.h.
(m32r_load): Use skip_spaces.
* serial.c: Include cli/cli-utils.h.
(serial_open): Use skip_spaces_const.
* stack.c: Include cli/cli-utils.h.
(parse_frame_specification_1): Use skip_spaces_const.
* symfile.c: Include cli/cli-utils.h.
(set_ext_lang_command): Use skip_spaces.
* symtab.c: Include cli/cli-utils.h.
(rbreak_command): Use skip_spaces.
* thread.c (thread_name_command): Use skip_spaces.
* tracepoint.c (validate_actionline): Use skip_spaces.
(encode_actions_1): Likewise.
(trace_find_range_command): Likewise.
(trace_find_outside_command): Likewise.
(trace_dump_actions): Likewise.
|
|
* cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
parameter VAR's type from "unsigned int" to "int".
* command.h (var_zuinteger_unlimited): Update its comments.
(add_setshow_zuinteger_unlimited_cmd): Update the declaration.
|
|
* cli/cli-decode.c (help_cmd): Remove the declaration of
"cmdlist".
(help_all): Likewise.
|
|
While writing the previous patch, I noticed that we're not consistent
with the (C) in the copyright header. The maintainers manual prefers
having it, though also says it's optional. We have over 10x more
files with (C) than without in gdb's code, so I spent a few minutes
grepping and fixing. Funny enough, the testsuite has it backwards.
I'll leave that for another time.
gdb/
2013-02-12 Pedro Alves <palves@redhat.com>
* amd64-darwin-tdep.c: Add (C) after Copyright.
* cli/cli-cmds.h: Ditto.
* cli/cli-decode.c: Ditto.
* cli/cli-decode.h: Ditto.
* cli/cli-dump.c: Ditto.
* cli/cli-dump.h: Ditto.
* cli/cli-interp.c: Ditto.
* cli/cli-logging.c: Ditto.
* cli/cli-script.c: Ditto.
* cli/cli-script.h: Ditto.
* cli/cli-setshow.c: Ditto.
* cli/cli-setshow.h: Ditto.
* cli/cli-utils.c: Ditto.
* cli/cli-utils.h: Ditto.
* config/alpha/nm-osf3.h: Ditto.
* config/djgpp/djconfig.sh: Ditto.
* config/i386/nm-fbsd.h: Ditto.
* config/i386/nm-i386gnu.h: Ditto.
* config/nm-linux.h: Ditto.
* config/nm-nto.h: Ditto.
* config/rs6000/nm-rs6000.h: Ditto.
* config/sparc/nm-sol2.h: Ditto.
* darwin-nat-info.c: Ditto.
* dfp.c: Ditto.
* dfp.h: Ditto.
* gdb-demangle.h: Ditto.
* i386-darwin-nat.c: Ditto.
* i386-darwin-tdep.c: Ditto.
* linux-fork.h: Ditto.
* m32c-tdep.c: Ditto.
* microblaze-linux-tdep.c: Ditto.
* microblaze-rom.c: Ditto.
* microblaze-tdep.c: Ditto.
* microblaze-tdep.h: Ditto.
* mips-linux-tdep.h: Ditto.
* ppc-ravenscar-thread.c: Ditto.
* ppc-ravenscar-thread.h: Ditto.
* prologue-value.c: Ditto.
* prologue-value.h: Ditto.
* ravenscar-thread.c: Ditto.
* ravenscar-thread.h: Ditto.
* sparc-ravenscar-thread.c: Ditto.
* sparc-ravenscar-thread.h: Ditto.
* tilegx-linux-tdep.c: Ditto.
* unwind_stop_reasons.def: Ditto.
* windows-nat.h: Ditto.
* xtensa-linux-tdep.c: Ditto.
* xtensa-xtregs.c: Ditto.
* regformats/regdat.sh: Ditto.
* regformats/regdef.h: Ditto.
gdb/gdbserver/
2013-02-12 Pedro Alves <palves@redhat.com>
* linux-xtensa-low.c: Ditto.
* xtensa-xtregs.c: Ditto.
|
|
disassemble command.
doc/
* gdb.texinfo (Machine Code): Clarify argument to disassemble
command.
|
|
* ada-lang.c (user_select_syms): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
(clear_command): New variable sal_fullname, initialize it. Replace
compare_filenames_for_search by filename_cmp with sal_fullname.
(say_where, update_static_tracepoint): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
Likewise.
* dwarf2read.c: Include source.h.
(fixup_go_packaging): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* linespec.c (add_sal_to_sals): Rename variable filename to fullname.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(create_sals_line_offset, convert_linespec_to_sals): New variable
fullname, initialize it, replace symtab->filename reference by the
variable.
* linux-fork.c: Include source.h.
(info_checkpoints_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* macroscope.c (sal_macro_scope): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* mdebugread.c: Include source.h.
(psymtab_to_symtab_1): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* printcmd.c: Include source.h.
(build_address_symbolic): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* psymtab.c (partial_map_symtabs_matching_filename)
(read_psymtabs_with_fullname): Call compare_filenames_for_search also
with psymtab_to_fullname.
* python/py-symtab.c (stpy_str): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(stpy_get_filename): New variable filename, initialize it, use instead
of symtab->filename refererences.
(salpy_str): Make variable filename const char *. Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
* skip.c: Include source.h and filenames.h.
(skip_file_command): Remove const from the symtab variable. Replace
symtab->filename refererences by symtab_to_fullname call.
(function_name_is_marked_for_skip): New variables searched_for_fullname
and fullname. Use them to search also with symtab's fullname.
* source.c (find_source_lines): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(print_source_lines_base): New variable filename, use it instead of
symtab->filename. Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(line_info, forward_search_command): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
(reverse_search_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls. New variable filename for it.
* stack.c (frame_info): Likewise.
* symmisc.c: Include source.h.
(dump_objfile, dump_symtab_1, maintenance_print_symbols)
(maintenance_info_symtabs): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* symtab.c (iterate_over_some_symtabs): Call
compare_filenames_for_search also with symtab_to_fullname.
(lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
(find_line_symtab): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(file_matches): Replace filename_cmp by compare_filenames_for_search.
(print_symbol_info): Make the last parameter const char *. New
variable s_filename. Use it in the function.
(symtab_symbol_info): Make the last_filename variable const char *.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(rbreak_command): New variable fullname. Use it. Replace
symtab->filename refererence by symtab_to_filename_for_display call.
* tracepoint.c (set_traceframe_context, trace_find_line_command)
(print_one_static_tracepoint_marker): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* tui/tui-source.c (tui_set_source_content): New variables filename and
s_filename. Replace symtab->filename refererences by this variable.
Replace other symtab->filename refererences by
symtab_to_filename_for_display calls.
|
|
Replace xfullpath calls by gdb_realpath calls.
* cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
function comment.
* dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
Remove it from the iterate_over_some_symtabs call.
(dw2_map_symtabs_matching_filename): Remove parameter full_path.
Remove it from the dw2_map_expand_apply calls, remove a block handling
it.
* psymtab.c (partial_map_expand_apply): Remove parameter full_path.
Remove it from the iterate_over_some_symtabs call.
(partial_map_symtabs_matching_filename): Remove parameter full_path.
Remove it from the partial_map_expand_apply calls, remove a block
handling it. Drop gdb_realpath call and cleanups from the real_path
handling.
* source.c (openp): Drop the comment part about xfullpath. Replace
xfullpath calls by gdb_realpath calls.
(find_and_open_source): Replace xfullpath call by gdb_realpath call.
* symfile.h (struct quick_symbol_functions): Remove parameter full_path
from method map_symtabs_matching_filename and its comment.
* symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
gdb_realpath call.
* symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
remove it also from the function comment, remove a block handling it.
Drop gdb_realpath call and cleanups from the real_path handling.
(iterate_over_symtabs): Drop variable full_path and its use.
* symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
* utils.c (xfullpath): Remove.
* utils.h (xfullpath): Remove.
gdb/testsuite/
* gdb.gdb/xfullpath.exp: Replace xfullpath calls by gdb_realpath calls.
|
|
* charset.c (intermediate_encoding): Remove unused i.
* completer.c (signal_completer): Remove unused i.
* continuations.c (discard_my_continuations_1): Remove unused
continuation_ptr.
* corelow.c (core_close): Remove unuseD name.
(get_core_siginfo): Remove unused pid.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
i, cps.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
(loclist_describe_location): Remove unused first.
* event-top.c (command_line_handler): Remove unused got_eof.
* exec.c (exec_close_1): Remove unused need_symtab_cleanup.
(resize_section_table): Remove unused old_value.
* gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
* gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
* i386-tdep.c (i386_process_record): Remove unused rex.
* infcmd.c (get_return_value): Remove unused uiout.
* jv-lang.c (type_from_class): Remove unused is_array.
* jv-valprint.c (java_val_print): Remove unused i.
* linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
* linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
* m2-typeprint.c (m2_print_type): Remove unused code.
* macroexp.c (get_character_constant): Remove unused body_start.
(macro_stringify): Remove unused result.
* objc-lang.c (find_methods): Remove unused gdbarch.
* objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
* regcache.c (regcache_cooked_read): Remove unused gdbarch.
* stack.c (print_frame_args): Remove unused summary.
* thread.c (thread_apply_command): Remove unused p.
* valarith.c (value_x_unop): Remove unused mangle_ptr.
* valops.c (search_struct_method): Remove unused skip.
* valprint.c (generic_val_print): Remove unused byte_order.
* varobj.c (varobj_update): Remove unused changed.
* cli/cli-cmds.c (complete_command): Remove unused next_item.
(alias_command): Remove unused c.
* mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
* mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
format.
(mi_cmd_data_write_memory): Remove unused word_format.
(mi_cmd_data_write_memory_bytes): Remove unused r.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
p_start, p_end.
* python/python.c (_initialize_python): Remove unused cmd_name, cmd.
* tui/tui-disasm.c (tui_set_disassem_content): Remove unused
line_width.
Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00766.html
|
|
set command.
* command.h (add_setshow_string_noescape_cmd): Update.
* corefile.c (set_gnutarget_command): Remove trailing whitespace.
(complete_set_gnutarget): New function.
(_initialize_core): Set the "set gnutarget" completer.
gdb/testsuite
* gdb.base/completion.exp: Add "set gnutarget" test.
|
|
gdb/ChangeLog:
* cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* ada-lang.c (is_known_support_routine): New variable fullname. Use
access call to verify the symtab_to_fullname result.
* breakpoint.c (print_breakpoint_location, update_static_tracepoint):
Remove NULL check of symtab_to_fullname result.
* cli/cli-cmds.c (edit_command): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* python/py-symtab.c (stpy_fullname): Likewise.
* source.c (symtab_to_fullname): Update function comment. Rename
variable r to fd, move it to inner block. Always provide non-NULL
result.
(print_source_lines_base): Remove NULL check of symtab_to_fullname
result.
* stack.c (print_frame): Likewise.
* symtab.c (iterate_over_some_symtabs, find_line_symtab, sources_info):
Likewise.
* tracepoint.c (print_one_static_tracepoint_marker): Likewise.
gdb/doc/
* gdb.texinfo (GDB/MI Data Manipulation) (fullname): Make it always
present.
(GDB/MI File Commands) (-file-list-exec-source-files): Make the
fullname output always present.
gdb/testsuite/
* gdb.mi/mi-fullname-deleted.exp: New file.
|
|
|
|
"define", "while", and "if" commands.
* cli/cli-script.c (while_command, if_command, define_command)
(document_command): Now static.
(_initialize_cli_script): New function.
* cli/cli-script.h (while_command, if_command, define_command)
(document_command): Don't declare.
|
|
(init_cli_cmds): Move most code into new function.
|
|
* cli/cli-decode.c (add_alias_cmd): Make a copy of doc field
if flags contains DOC_ALLOCATED.
(add_setshow_cmd_full): Add DOC_ALLOCATED to set and show
flags.
(delete_cmd): Handle DOC_ALLOCATED flag.
* cli/cli-decode.h (DOC_ALLOCATED): New macro for use
in flags filed of struct cmd_list_element.
(struct cmd_list_element): Document new flag item.
|
|
Replace sprintf function calls for char arrays by
calls to xsnprintf calls.
* arm-tdep.c (arm_push_dummy_call): Replace sprintf by xsnprintf.
(arm_dwarf_reg_to_regnum, arm_return_value): Ditto.
(arm_neon_quad_read, arm_pseudo_read): Ditto.
(arm_neon_quad_write, arm_pseudo_write): Ditto.
* breakpoint.c (condition_completer): Ditto.
(create_tracepoint_from_upload): Ditto.
* dwarf2read.c (file_full_name): Ditto.
* gcore.c (gcore_command): Ditto.
* gnu-nat.c (proc_string, gnu_pid_to_str): Ditto.
* go32-nat.c (go32_sysinfo): Ditto.
* interps.c (interp_set): Ditto.
* m32c-tdep.c (make_types): Ditto.
* ppc-linux-nat.c (fetch_register, store_register): Ditto.
* remote-m32r-sdi.c (m32r_open): Ditto.
* sol-thread.c (td_err_string): Ditto.
(td_state_string, solaris_pid_to_str): Ditto.
* symtab.c (gdb_mangle_name): Ditto.
* cli/cli-script.c (execute_control_command): Ditto.
(define_command, document_command): Ditto.
* tui/tui-io.c (tui_rl_display_match_list): Ditto.
* tui/tui-stack.c (tui_make_status_line): Ditto.
* tui/tui-win.c (tui_update_gdb_sizes): Ditto.
|
|
There are a bunch of aliases that get used with help, but the current
command completion logic does not include those when doing completions.
Since the framework is already mostly in place, extend complete_on_cmdlist
slightly to pass down the ignore_help_classes flag like is done with the
existing lookup command logic.
Now you can do:
(gdb) help use<tab>
and get back:
(gdb) help user-defined
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
(get_target_gdbarch): Rename to target_gdbarch.
* gdbarch.c, gdbarch.h: Rebuild.
* ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c,
arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c,
darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c,
filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c,
ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c,
mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c,
mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c,
nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c,
procfs.c, progspace.c, ravenscar-thread.c, record.c,
remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c,
rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c,
solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c,
solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c,
spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c,
target-descriptions.c, target.c, target.h, tracepoint.c,
windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c,
common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/python.c: Update.
|
|
* symtab.c (iterate_over_some_symtabs): Constify.
* source.h (symtab_to_fullname): Return 'const char *'.
* source.c (symtab_to_fullname): Return 'const char *'.
* python/py-symtab.c (stpy_fullname): Constify.
* cli/cli-cmds.c (edit_command): Constify.
* breakpoint.c (print_breakpoint_location)
(update_static_tracepoint): Constify.
|
|
Fix disassemble without parameters in tailcall frame.
* cli/cli-cmds.c (disassemble_current_function): Use
get_frame_address_in_block.
gdb/testsuite/
Fix disassemble without parameters in tailcall frame.
* gdb.arch/amd64-entry-value.exp (down, disassemble): New tests.
|
|
* cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): New.
Update comment to add_setshow_integer_cmd.
* cli/cli-setshow.c (do_set_command): Handle case
'var_zuinteger_unlimited'.
(do_show_command): Likewise.
* cli/cli-cmds.c (init_cmds): Call add_setshow_zuinteger_unlimited_cmd
for command 'remotetimeout'.
* command.h (enum var_types): New zuinteger_unlimited. Update comment
to var_integer.
* source.c (_initialize_source): Call add_setshow_zuinteger_unlimited_cmd
for command 'set listsize'.
gdb/doc/
* gdb.texinfo (List): Describe the meaning of 0 and -1 in
'set listsize'.
gdb/testsuite/
* gdb.base/list.exp (set_listsize): Don't set arg to "unlimited"
when it is less than 0.
|
|
* cli/cli-cmds.c (max_user_call_depth): Add 'unsigned'.
(init_cmds): Call add_setshow_uinteger_cmd for command
'max-user-call-depth'.
* cli/cli-script.c (execute_user_command): Add 'unsigned' to the
declaration of 'max_user_call_depth'.
* frame.c (backtrace_limit): Add 'unsigned'.
(_initialize_frame): Call add_setshow_uinteger_cmd for command
'limit'.
* remote.c (remoteaddresssize): Add 'unsigned'.
(remote_address_masked): Change local var 'address_size' to
'unsigned'.
(_initialize_remote): Call add_setshow_uinteger_cmd for
'remoteaddresssize'.
* top.c (history_size): Add 'unsigned'.
(show_commands): Change local variables to 'unsigned'.
(set_history_size_command): Don't check history_size is negative.
Adjust the condition to call unstifle_history and set history_size
to UNIT_MAX.
|
|
* cli/cli-decode.c (print_doc_line): Keep skipping '.' and ',' not
followed by a whitespace.
|
|
|
|
* cli/cli-decode.c (set_cmd_prefix): New.
(lookup_cmd_for_prefixlist): New.
(add_prefix_cmd): Call set_cmd_prefix and update field 'prefix'
of each cmd_list_element in *prefixlist.
(add_setshow_cmd_full): set_cmd_prefix.
(add_alias_cmd): Likewise.
* cli/cli-decode.h (struct cmd_list_element) <prefix>: New field.
Declare 'auto_boolean_enums'.
* cli/cli-setshow.c: Include "observer.h".
(notify_command_param_changed_p): New.
(add_setshow_auto_boolean_cmd): Move auto_boolean_enums out.
Remove 'static'.
(do_setshow_command): Split it to ...
(do_set_command, do_show_command): ... them. New.
(do_set_command): Call observer_notify_command_param_changed if
notify_command_param_changed_p returns true.
(cmd_show_list): Caller update.
* auto-load.c (set_auto_load_cmd): Likewise.
* remote.c (show_remote_cmd): Likewise.
* cli/cli-setshow.h: Update declarations.
* top.c (execute_command): Call do_set_command and do_show_command.
* NEWS: Mention new MI notification.
* mi/mi-interp.c: Declare mi_command_param_changed.
(mi_interpreter_init): Attach mi_command_param_changed to
observer command_param_changed.
(mi_command_param_changed): New.
Remove mi_suppress_breakpoint_notifications.
Define global variable mi_suppress_notification.
(mi_breakpoint_created): Update.
(mi_breakpoint_deleted): Likewise.
(mi_breakpoint_modified): Likewise.
* mi/mi-main.c (mi_cmd_execute): Likewise. Check command
'gdb-set' and set mi_suppress_notification.
* mi/mi-main.h: (mi_suppress_notification): New struct.
gdb/doc/
* observer.texi: New observer command_param_changed.
* gdb.texinfo (GDB/MI Async Records): Doc for '=cmd-param-changed'.
gdb/testsuite/
* gdb.mi/mi-cmd-param-changed.exp: New.
* gdb.mi/mi-cli.exp: Update for MI notification "=cmd-param-changed".
* gdb.mi/mi-var-rtti.exp, gdb.mi/mi2-cli.exp: Likewise.
* gdb.mi/mi2-prompt.exp: Likewise.
|
|
* cli/cli-cmds.c (enablebreaklist): Move it to breakpoint.c.
(skiplist): Move it to skip.c.
(init_cmd_lists): Remove code setting enablebreaklist and
skiplist to NULL.
* breakpoint.c (enablebreaklist): Moved from cli/cli-cmds.c.
* cli/cli-cmds.h: Remove declaration of enablebreaklist and
skiplist.
* gdbcmd.h: Likewise.
* skip.c (_initialize_step_skip): Move 'skiplist' from
cli/cli-cmds.c.
|
|
* cli/cli-dump.c: Add 'static' to some cmd_list_element variables.
* gnu-nat.c, symfile.c: Likewise.
|
|
* cli/cli-cmds.c (list_command): Filter 'sals_end'.
|
|
2012-08-06 Nathaniel Flath <flat0103@gmail.com>
* NEWS: New entry for 'cd' default parameters.
* cli/cli-cmds.c (cd_command): Replace error_no_arg by DIR assignment.
gdb/doc/
2012-08-06 Nathaniel Flath <flat0103@gmail.com>
* gdb.texinfo (Working Directory): Added information about new
default argument for 'cd' command.
|
|
immediate_quit.
(print_objfile_statistics): Likewise.
(maintenance_print_symbols): Likewise.
(maintenance_print_msymbols): Likewise.
(maintenance_print_objfiles): Likewise.
* psymtab.c (print_partial_symbols): Call QUIT.
(maintenance_print_psymbols): Likewise. Don't modify
immediate_quit.
* copying.c (show_copying_command): Don't modify immediate_quit.
(show_warranty_command): Likewise.
* cli/cli-cmds.c (show_version): Don't modify immediate_quit.
|
|
* cli/cli-setshow.c (do_setshow_command): Handle case 'var_uinteger'
and 'var_zuninteger' together. Handle case 'var_integer' and
'var_zinteger' together.
|
|
(bfd_openw_with_cleanup): Use gdb_bfd_openw.
* corelow.c (core_open): Use gdb_bfd_fopen.
* dsrec.c (load_srec): Use gdb_bfd_openr.
* exec.c (exec_file_attach): Use gdb_bfd_fopen.
* gcore.c (gcore_memory_sections): Use gdb_bfd_openw.
* gdb_bfd.c (gdb_bfd_fopen, gdb_bfd_openr, gdb_bfd_openw)
(gdb_bfd_openr_iovec, gdb_bfd_openr_next_archived_file)
(gdb_bfd_fdopenr): New functions.
* gdb_bfd.h (gdb_bfd_fopen, gdb_bfd_openr, gdb_bfd_openw)
(gdb_bfd_openr_iovec, gdb_bfd_openr_next_archived_file)
(gdb_bfd_fdopenr): Declare.
* jit.c (bfd_open_from_target_memory): Use gdb_bfd_openr_iovec.
* m32-rom.c (m32r_load, m32r_upload_command): Use gdb_bfd_openr.
* machoread.c (macho_symfile_read_all_oso): Use gdb_bfd_openr,
gdb_bfd_openr_next_archived_file.
(macho_check_dsym): Use gdb_bfd_openr.
(macho_add_oso_symfile): Don't call gdb_bfd_stash_filename.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_fdopenr.
* remote-m32r-sdi.c (m32r_load): Use gdb_bfd_openr.
* remote-mips.c (mips_load_srec, pmon_load_fast): Use
gdb_bfd_openr.
* remote.c (remote_bfd_open): Use gdb_bfd_openr_iovec.
* rs6000-nat.c (add_vmap): Use gdb_bfd_openr, gdb_bfd_fdopenr,
gdb_bfd_openr_next_archived_file.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Use gdb_bfd_openr.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use
gdb_bfd_openr.
* solib-spu.c (spu_bfd_fopen): Use gdb_bfd_openr_iovec.
* solib.c (solib_bfd_fopen): Use gdb_bfd_fopen.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_openr_iovec.
* symfile.c (bfd_open_maybe_remote): Use gdb_bfd_openr.
(symfile_bfd_open): Use gdb_bfd_fopen.
(generic_load): Use gdb_bfd_openr.
* windows-nat.c (windows_make_so): Use gdb_bfd_openr.
|
|
* cli/cli-dump.c (bfd_openr_with_cleanup)
(bfd_openw_with_cleanup): Update.
* corelow.c (core_open): Update.
* dsrec.c (load_srec): Update.
* exec.c (exec_file_attach): Update.
* gcore.c (create_gcore_bfd): Update.
* gdb_bfd.c (gdb_bfd_ref): Return void.
(gdb_bfd_open): Update.
* gdb_bfd.h (gdb_bfd_ref): Return void.
Update comments.
* jit.c (jit_bfd_try_read_symtab): Update.
* m32r-rom.c (m32r_load, m32r_upload_command): Update.
* machoread.c (macho_symfile_read_all_oso): Update.
(macho_check_dsym): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* remote-m32r-sdi.c (m32r_load): Update.
* remote-mips.c (mips_load_srec, pmon_load_fast): Update.
* rs6000-nat.c (add_vmap): Update.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-spu.c (spu_bfd_open): Update.
* solib.c (solib_bfd_fopen, solib_read_symbols): Update.
* spu-linux-nat.c (spu_bfd_open): Update.
* symfile.c (bfd_open_maybe_remote, symfile_bfd_open)
(generic_load): Update.
* windows-nat.c (windows_make_so): Update.
|
|
* cli/cli-setshow.c (do_setshow_command): Don't check pointer is
NULL for xfree.
|
|
and case 'var_optional_filename' together.
* infcmd.c (_initialize_infcmd): Call add_setshow_string_noescape_cmd
instead of add_setshow_optional_filename_cmd for setshow command
'args'. Set completer for 'set args'.
gdb/testsuite:
* gdb.base/setshow.exp: Test 'set args ~'.
|
|
make_cleanup_bfd_close.
* defs.h (make_cleanup_bfd_unref): Rename from
make_cleanup_bfd_close.
* cli/cli-dump.c (bfd_openr_with_cleanup): Update.
(bfd_openw_with_cleanup): Update.
* corelow.c (core_open): Update.
* dsrec.c (load_srec): Update.
* m32r-rom.c (m32r_load, m32r_upload_command): Update.
* remote-m32r-sdi.c (m32r_load): Update.
* remote-mips.c (mips_load_srec): Update.
(pmon_load_fast): Update.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Update.
(darwin_bfd_open): Update.
* solib.c (solib_bfd_fopen): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Update.
(symfile_bfd_open): Update.
(generic_load): Update.
|
|
gdb_bfd_unref.
(free_dwo_file): Use gdb_bfd_unref.
* cli/cli-dump.c: Include gdb_bfd.h.
(bfd_openw_with_cleanup): Use gdb_bfd_ref.
(bfd_openr_with_cleanup): Likewise.
* windows-nat.c (windows_make_so): Use gdb_bfd_ref,
gdb_bfd_unref.
* utils.c: Include gdb_bfd.h.
(do_bfd_close_cleanup): Use gdb_bfd_unref.
* symfile.c: Include gdb_bfd.h.
(separate_debug_file_exists): Use gdb_bfd_unref.
(bfd_open_maybe_remote): Use gdb_bfd_ref.
(symfile_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
(generic_load): Use gdb_bfd_ref.
(reread_symbols): Use gdb_bfd_unref.
* symfile-mem.c: Include gdb_bfd.h.
(symbol_file_add_from_memory): Use make_cleanup_bfd_close.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
* solib.c: Include gdb_bfd.h.
(solib_bfd_fopen): Use gdb_bfd_ref.
(solib_bfd_open): Use gdb_bfd_unref.
(free_so_symbols): Use gdb_bfd_unref.
(reload_shared_libraries_1): Use gdb_bfd_unref.
* solib-spu.c: Include gdb_bfd.h.
(spu_bfd_fopen): Use gdb_bfd_ref, gdb_bfd_unref.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_ref,
gdb_bfd_unref.
* solib-frv.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-dsbt.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-darwin.c: Include gdb_bfd.h.
(darwin_solib_get_all_image_info_addr_at_init): Use gdb_bfd_ref,
gdb_bfd_unref.
(darwin_bfd_open): Use gdb_bfd_unref.
* rs6000-nat.c (add_vmap): Use gdb_bfd_ref, gdb_bfd_unref.
* remote-mips.c: Include gdb_bfd.h.
(mips_load_srec): Use gdb_bfd_ref.
(pmon_load_fast): Use gdb_bfd_ref.
* remote-m32r-sdi.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
* record.c: Include gdb_bfd.h.
(record_save_cleanups): Use gdb_bfd_unref.
(cmd_record_save): Use gdb_bfd_unref.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_ref,
gdb_bfd_unref.
* objfiles.h (gdb_bfd_close_or_warn): Remove.
(gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.h.
* objfiles.c: Include gdb_bfd.h.
(free_objfile): Use gdb_bfd_unref.
(gdb_bfd_close_or_warn, gdb_bfd_ref, gdb_bfd_unref): Move to
gdb_bfd.c.
* machoread.c (macho_add_oso_symfile): Use gdb_bfd_unref.
(macho_symfile_read_all_oso): Use gdb_bfd_ref, gdb_bfd_unref.
(macho_check_dsym): Likewise.
* m32r-rom.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
(m32r_upload_command): Use gdb_bfd_ref.
* jit.c: Include gdb_bfd.h.
(jit_bfd_try_read_symtab): Use gdb_bfd_ref, gdb_bfd_unref.
* gdb_bfd.h: New file.
* gdb_bfd.c: New file.
* gcore.c: Include gdb_bfd.h.
(create_gcore_bfd): Use gdb_bfd_ref.
(do_bfd_delete_cleanup): Use gdb_bfd_unref.
(gcore_command): Use gdb_bfd_unref.
* exec.c: Include gdb_bfd.h.
(exec_close): Use gdb_bfd_unref.
(exec_close_1): Use gdb_bfd_unref.
(exec_file_attach): Use gdb_bfd_ref.
* elfread.c: Include gdb_bfd.h.
(build_id_verify): Use gdb_bfd_unref.
* dsrec.c: Include gdb_bfd.h.
(load_srec): Use gdb_bfd_ref.
* corelow.c: Include gdb_bfd.h.
(core_close): Use gdb_bfd_unref.
(core_open): Use gdb_bfd_ref.
* bfd-target.c: Include gdb_bfd.h.
(target_bfd_xclose): Use gdb_bfd_unref.
(target_bfd_reopen): Use gdb_bfd_ref.
* Makefile.in (SFILES): Add gdb_bfd.c.
(HFILES_NO_SRCDIR): Add gdb_bfd.h.
(COMMON_OBS): Add gdb_bfd.o.
|
