| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
to char, since everything passed in and out of dcache is char or casted
to appropriate type anyway.
(dcache_alloc): Move assignment of db out of test and combine separate
tests into if-else.
(dcache_peek_byte): Change ptr from unsigned char* to char*.
(dcache_peek_byte): Remove now unnecessary cast in read_memory call.
(dcache_peek): Change cast of incoming data arg.
(dcache_poke): Change cast of addr of incoming data arg.
(dcache_info): Mask data passed to printf_filtered to lsbyte only.
(dcache_info): Change printf_filtered arg from "% 2x" to " %2x".
* target.c (debug_to_thread_alive): Change return type to int and
return zero, for type compatibility with other *_thread_alive funcs.
(cleanup_target): Change cast of ignore function to match type of the
to_thread_alive member.
* defs.h (error_hook): Add ATTR_NORETURN.
* defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
__attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
* remote.c (remote_wait): Cast first arg to strtol, strchr, and strncmp
to "const char *" from "unsigned char *".
(remote_wait): Cast arg to putpkt and strcpy from "unsigned char *" to
"char *".
(remote_wait): Change printf format for long arg from "%d" to "%ld".
(getpkt): Remove unused variable "bp".
(remote_fetch_word, remote_store_word): Ifdef out apparently unused
functions.
* breakpoint.c (watchpoint_check): Removed unused variables
"saved_level" and "saved_frame".
* valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and
default cases to switch for completeness.
* infrun.c (wait_for_inferior): Enclose "have_waited" label
in #ifdef that matches the one in which it is referenced.
* ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise
unused variable "state" in #ifdef that matches one in which it is
referenced.
* eval.c (evaluate_subexp_standard): Remove unused variable "var".
* eval.c (evaluate_subexp_standard): Remove unused variable "tmp_symbol".
* valarith.c (value_subscript): Remove unused variable "lowerbound",
which is redeclared in a nested scope prior to use.
* printcmd.c (print_frame_nameless_args): Use "%ld" to print long
arg, not "%d".
* {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
Remove unused static var "check_break_insn_size".
* buildsym.c (finish_block): Add other enum LOC_* and default
cases to switch for completeness.
ch-lang.c (type_lower_upper): Removed unused label "retry".
Add other enum TYPE_* and default cases to switch for completeness.
* f-typeprint.c (f_type_print_args): Ifdef out unused function
that may be used someday when Fortran support is complete.
* ch-valprint.c (chill_print_type_scalar): Add other enum
TYPE_* and default cases to switch for completeness.
(chill_val_print): Remove unused local var "high_bound" that
is redeclared in a nested scope prior to use.
(chill_var_print): Use "%ld" to print long arg, not "%d".
* regex.c (re_compile_fastmap, re_match_2): Add remaining enum types
and default to switches for completeness.
* minsyms.c (lookup_minimal_symbol_text): Delete unused variable
"trampoline_symbol".
(prim_record_minimal_symbol_and_info): Return NULL rather than trash.
* elfread.c (elf_symtab_read): Don't dereference NULL returns from
record_minimal_symbol_and_info.
* f-lang.c (saved_function_list_end): Ifdef out unused variable
that may be used someday.
* f-valprint.c (f_val_print): Remove unused local variable "straddr".
|
|
* eval.c (evaluate_subexp_standard): Remove unused variable.
(calc_f77_array_dims): Add parens to expression.
* f-exp.y (yylex): Add parens to expression, remove unused label.
* f-lang.h (calc_f77_array_dims): Declare.
* f-valprint.c (f_val_print): Remove unused variables.
|
|
print address for non-'s'-formats.
* ch-typeprint.c, ch-valprint.c: Use chill_varying_type instead
of chill_is_varying_struct.
|
|
BOOL from TYPE_NAME.
* ch-valprint.c (chill_print_type_scalar): New function, to handle
TYPE_CODE_RANGE better than print_type_scalar does.
(chill_val_print_array_elements): Use above new function.
|
|
* ch-typeprint.c, ch-valprint.c: Use TYPE_INDEX_TYPE.
* ch-valprint.c (chill_val_print): Pass index type directly
(instead of its TYPE_TARGET_TYPE) to print_type_scalar.
* stabsread.c (read_type): Don't set TYPE_FLAG_TARGET_STUB
if the index type is a stub.
|
|
but would print pointers and arrays in C syntax. Instead, call
a language-specific function. See ChangeLog for details.
|
|
A Chill version of val_print_array_elements, it prints the
array index labels, in additions ot the array element values.
(chill_val_print): Use the new function.
|
|
* breakpoint.c (watchpoint_check): Remove unused variable b.
* stack.c (print_frame_info): Move sp and buf inside #if.
* eval.c (evaluate_subexp): Remove unused variables pp,
mangle_ptr, ptr, and mangle_tstr.
* valarith.c (value_x_binop): Remove unused variables mangle_tstr
and mangle_ptr.
* symtab.c (lookup_symtab): Put variable copy inside #if.
(decode_line_1): Put variable q1 inside #if 0.
* target.h: Declare target_link.
* infrun.c (wait_for_inferior): Remove unused variables signame.
* remote.c (remote_resume): Remove unused variable name.
* c-exp.y (parse_number): Parenthesize operand of shift.
* dbxread.c (record_minimal_symbol): Parenthesize operand of &&
(this is a semantic change, the warning seems to have detected a bug).
* dbxread.c (end_psymtab): Move variable p1 inside #if.
* coffread.c: Move variable temptype inside #if.
* ch-typeprint.c (chill_type_print_base): Remove unused variable
name.
* ch-valprint.c: #include typeprint.h and ch-lang.h.
(chill_val_print): Remove unused variable in_range.
(chill_val_print): Remove statement "length > TYPE_LENGTH (type);".
(chill_val_print): Add default case for switch.
* stabsread.h: Declare stabsect_build_psymtabs.
* os9kread.c (read_minimal_symbols): Make this return void.
(os9k_symfile_read): Remove unused variables stb_exist and val.
(os9k_symfile_init): Remove unused variable val.
(fill_sym): Remove unused variable id.
(read_os9k_psymtab): Put variable back_to inside #if 0. Remove
unused variable nsl.
Remove unused variable symfile_bfd.
#if 0 unused variables lbrac_unmatched_complaint and
lbrac_mismatch_complaint.
Remove declaration for non-existent function os9k_next_symbol_text.
* annotate.c, annotate.h: New files, containing a function for
each annotation which outputs it.
* Move breakpoints_changed from breakpoint.c to annotate.c.
* breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c,
printcmd.c, source.c, stack.c, utils.c, valprint.c:
Use annotate.c functions to output annotations.
* Makefile.in (OBS): Add annotate.o.
|
|
* printcmd.c, defs.h (print_address_numeric), callers in
symmisc.c, symfile.c, stack.c, source.c, remote.c, infcmd.c,
cp-valprint.c, core.c, ch-valprint.c, c-valprint.c, breakpoint.c,
exec.c: New argument use_local.
* source.c (identify_source_line): Use filtered output. Use
print_address_numeric.
|
|
cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
valarith.c, valops.c, valprint.c, value.h, values.c: Replace
value with value_ptr. This is for the ptx compiler.
* objfiles.h, target.h: Don't declare a "sec_ptr" field using a
"sec_ptr" typedef.
* symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
#if 0 i386_float_info.
* symm-tdep.c (round): Remove. Also remove sgttyb.
* symm-tdep.c: Remove lots of stuff which duplicates stuff from
i386-tdep.c. Remove register_addr and ptx_coff_regno_to_gdb.
* i386-tdep.c (i386_frame_find_saved_regs): Put in
I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
someday.
* config/i386/nm-symmetry.h: Change KERNEL_U_ADDR. Move
stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
symm-nat.c. Define CHILD_WAIT and declare child_wait().
* config/i386/tm-symmetry.h: Remove call function stuff; stuff in
tm-i386v.h is apparently OK.
* config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
HAVE_TERMIO. Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
USE_O_NOCTTY.
|
|
Change comments regarding TYPE_CODE_BOOL.
* language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
regardless of the language.
(value_true): Just call value_logical_not regardless of language.
* coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
* language.h: Improve comment for la_builtin_type_vector.
* m2-lang.c (_initialize_m2_language): Don't add any fields to
builtin_type_m2_bool.
|
|
various miscellaneous things discovered in the process:
* printcmd.c, defs.h (print_address_numeric): New function.
* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
Use it.
* utils.c, defs.h (gdb_print_address): New function.
* expprint (dump_expression), gdbtypes.h: Use it.
* breakpoint.c (describe_other_breakpoints),
symmisc.c (dump_symtab, print_symbol):
Use filtered not unfiltered I/O.
(remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
just run gdb under a debugger for this (and it had problems with
printing addresses, how to print b->shadow, etc.).
* buildsym.c (make_blockvector), core.c (memory_error),
exec.c (print_section_info), maint.c (print_section_table),
mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Add comments saying code is broken. Marked with "FIXME-32x64".
* dbxread.c (process_one_symbol), partial-stab.h (default),
remote-vx.c (vx_run_files_info):
Don't cast int being passed to local_hex_string.
* symmisc.c (print_symbol): Don't cast long being passed to %lx.
* symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
only being a long.
* symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
and LOC_LOCAL.
* printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
* source.c: Include <sys/types.h> regardless of USG.
|
|
* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
Use extract_unsigned_integer to get the address of a reference.
|
|
* ch-lang.c (chill_is_varying_struct), ch-lang.h: New function.
* ch-lang.c (chill_printstr): Use double quotes, not single quotes.
* ch-typeprint.c (chill_type_print_base): Handle TYPE_CODE_BITSTRING.
Improve printing of TYPE_CODE_STRING, TYPE_CODE_SET, and
TYPE_CODE_STRUCT (including checking chill_is_varying_struct).
Print TYPE_DUMMY_RANGE by printing its TYPE_TARGET_TYPE.
Handle TYPE_CODE_ENUM.
* ch-valprint.c (chill_val_print): Handle TYPE_CODE_BITSTRING.
For TYPE_CODE_STRING, never print address. Handle VARYING strings.
* gdbtypes.c (force_to_range_type): New.
* gdbtypes.c (create_set_type): Make work, following Chill layout.
* gdbtypes.h (TYPE_LOW_BOUND, TYPE_HIGH_BOUND, TYPE_DUMMY_RANGE): New.
* stabsread.c (read_type): Distinguish string and bitstring from
char-array and set.
* valarith.c (value_subscript), valops.c (value_coerce_array):
Handle STRINGs as well as ARRAYs.
* valarith.c (value_bit_index): Fix think. Use new macros.
|
|
* ch-exp.y (operand_2): Implement 'Element IN PowerSet'.
* ch-typeprint.c (chill_type_print_base): Handle POWERSETs.
* ch-valprint.c (chill_val_print): Handle TYPE_CODE_SET.
* eval.c (evaluate_subexp): Implement BINOP_IN.
* expression.h (enum exp_opcode): Added BINOP_IN.
* gdbtypes.c (create_set_type), gdbtypes.h: New function.
* stabsread.c (read_type): If 'S', create a set type.
* valarith.c (value_bit_index, value_in), value.h: New functions,
for indexing in SETs.
|
|
without interpreting that to mean "adjustable."
* ch-valprint.c (chill_val_print): Handle RANGE types.
* ch-typeprint.c (chill_type_print_base): Handle BOOL.
Handle variant records. Handle RANGE types.
|
|
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
|
|
which no longer occur.
gcc -Wall lint:
* findvar.c (symbol_read_needs_frame), corelow.c (ignore),
inflow.c (gdb_has_a_terminal): Make sure to return a value.
* regex.h: Declare re_set_syntax.
* printcmd.c: Include valprint.h.
* infcmd.c, exec.c, maint.c, core.c: Include language.h.
* maint.c: Include expression.h.
* infrun.c, fork-child.c, corelow.c, inflow.c: Include thread.h.
* inftarg.c: Include command.h.
* coredep.c: Include value.h.
* c-exp.y, m2-exp.y, ch-exp.y: Include bfd.h, symfile.h and objfiles.h.
* ch-typeprint.c: Include typeprint.h.
* ch-valprint.c: Include c-lang.h.
* nlmread.c: Include buildsym.h.
* environ.c: Include gdbcore.h. Only include defs.h once.
(set_in_environ): Cast const char * to char * when passing to
set_gnutarget.
Remove unused variables:
* printcmd.c (printf_command): args_to_vprintf.
* coffread.c (coff_symfile_init): strsection.
Move variables to within the #ifdefs where they are used:
* symtab.c (gdb_mangle_name): opname.
* inftarg.c (child_attach): pid and exec_file.
* inftarg.c (child_detach): siggnal.
* objfiles.c (allocate_objfile): mapto, md, and fd.
* objfiles.c (free_objfile): mmfd.
* infrun.c (wait_for_inferior): Include BPSTAT_WHAT_LAST in switch.
* infrun.c (wait_for_inferior): Remove unused same_pid label.
* inferior.h: Declare set_sigint_trap and clear_sigint_trap.
* parser-defs.h: Declare write_exp_elt_block.
* stabsread.h: Declare elfstab_offset_sections and
coffstab_build_psymtabs.
|
|
* symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES.
Clean up problems with targets and hosts that have 64 bit longs
and pointers and 32 bit ints.
* breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c,
ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c,
expprint.c, gdbtypes.c, infcmd.c, language.c, language.h,
m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h,
printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Change all printf formats from %x to %lx if outputting an address.
Change la_*_format to use long format.
local_hex_string, local_hex_string_custom now take an unsigned long
argument, change all callers.
* coffread.c (read_coff_symtab): Remove superfluous cast for
complaint output.
* dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int.
* findvar.c, value.h (write_register): Change register value to long.
* gdbtypes.h (struct type): Change `bitsize' to long as
TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer.
* inferior.h (struct inferior_status): Change type of stop_pc to
CORE_ADDR.
* language.h (local_octal_string, local_octal_string_custom):
Remove prototype, the functions are neither defined nor used.
* mipsread.c (parse_symbol): Use temporary variable for bitsize as
f->bitsize is a long now.
* objfiles.c (add_to_objfile_sections, build_objfile_section_table):
Use unsigned long casts instead of int for abusing sections_end
pointer as integer.
* stack.c (parse_frame_specification): Change type of `args' to
CORE_ADDR for SETUP_ARBITRARY_FRAME.
* printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE.
* mipsread.c (parse_type): Alpha cc now supports the t->continued
bit, update algorithm to match the way the compiler uses it.
|
|
|
|
address, not addr.
* hppah-nat.c (store_inferior_registers): Don't print i in cases
where we aren't using it.
|
|
UNOP_IND, UNOP_CAST, UNOP_ADDR, STRUCOP_STRUCT, OP_TYPE.
* ch-typeprint.c (chill_print_type): Move support
for TYPE_CODE_ARRAY and TYPE_CODE_STRING from here ...
* ch-typeprint.c (chill_type_print_base): ... here.
* ch-typeprint.c (chill_type_print_base): Improve
support for PTR, REF, and FUNC types.
* ch-valprint.c: Prefer H'%x format to 0x%s.
* ch-valprint.c (chill_val_print): Add support for printing
TYPE_CODE_REF (return for LOC parameters and variables).
Use c_val_print to print random types (including ENUM).
* ch-valprint,c (chill_print_value_fields): Make
output look more like Chill tuples.
* stabsread.c (read_struct_type): Factor common code.
|
|
* utils.c (fprintf_symbol_filtered): New function which combines
the functionality of fputs_demangled and fprint_symbol. Uses a
caller provided language parameter to select the appropriate
demangler, and caller provided args to pass to the demangler.
* defs.h (fputs_demangled, fprint_symbol): Remove prototypes.
* defs.h (fprintf_symbol_filtered): Add prototype.
* c-typeprint.c (cp_type_print_method_args): Replace calls to
fputs_demangled with call to fprintf_symbol_filtered.
* cp-valprint.c (demangle.h): Include
* cp-valprint.c (cp_print_value_fields): Replace calls to
fprint_symbol with calls to fprintf_symbol_filtered.
* printcmd.c (print_frame_args): Replace call to fprint_symbol
with call to fprintf_symbol_filtered.
* stack.c (print_frame_info, frame_info): Add language variable
to pass to fprintf_symbol_demangled and initialize it from the
symbol's language. Replace calls to fputs_demangled with calls
to fprintf_symbol_filtered.
* symtab.c (find_methods): Replace call to fputs_demangled with
call to fprintf_symbol_filtered.
**** start-sanitize-chill ****
* ch-valprint.c (demangle.h): Include.
* ch-valprint.c (chill_print_value_fields): Replace call to
fprint_symbol with call to new fprintf_symbol_filtered.
**** end-sanitize-chill ****
|
|
* ch-typeprint.c (chill_print_type_base): Name changed to
chill_type_print_base to match pattern for C and C++ names.
* ch-typeprint.c (chill_print_type): Change "char" to "CHAR"
to be consistent with other usages.
* ch-typeprint.c (chill_type_print_base): Add support for
printing Chill STRUCT types.
* ch-valprint.c: Include values.h.
* ch-valprint.c (chill_print_value_fields): New function and
prototype for printing Chill STRUCT values.
* ch-valprint.c (chill_val_print): Fix call to val_print_string
that was being called with two args instead of three.
* ch-valprint.c (chill_val_print): Call chill_print_value_fields
to print Chill STRUCT values.
**** end-sanitize-chill ****
|
|
of array constants using the obvious syntax.
* c-valprint.c (c_val_print): Set printed string length.
* dwarfread.c (read_tag_string_type): New prototype and
function that handles TAG_string_type DIEs.
* dwarfread.c (process_dies): Add case for TAG_string_type
that calls new read_tag_string_type function.
* expprint.c (print_subexp): Add support for OP_ARRAY.
* gdbtypes.c (create_range_type, create_array_type): Inherit
objfile from the index type.
**** start-sanitize-chill ****
* ch-typeprint.c (chill_print_type): Add case for
TYPE_CODE_STRING.
* ch-valprint.c (chill_val_print): Fix case for
TYPE_CODE_STRING.
**** end-sanitize-chill ****
|
|
constants with an explicit null byte terminator. OP_STRING is
now used for real string types.
* c-lang.c (builtin_type_*): Move declarations to lang.c since
they are used by all languages.
* c-lang.c (_initialize_c_language): Move initializations of
builtin_type_* to lang.c.
* c-typeprint.c (c_type_print_varspec_prefix,
c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed
to TYPE_CODE_STRING.
* c-valprint.c (c_val_print): Change the way character arrays
are printed as strings to be consistent with the way strings
are printed when pointer-to-char types are dereferenced.
Remove test of print_max before calling val_print_string, which
now does it's own test.
* eval.c (evaluate_subexp): Add case for OP_ARRAY.
* expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY.
* expression.h (enum exp_opcode): Add OP_ARRAY and document.
* gdbtypes.c (builtin_type_*): Add declarations moved from
c-lang.c.
* gdbtypes.c (create_string_type): New function to create real
string types.
* gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY
renamed to TYPE_CODE_STRING.
* gdbtypes.c (_initialize_gdbtypes): Add initializations of
builtin_type_* types moved from c-lang.c.
* gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed
to TYPE_CODE_STRING.
* gdbtypes.h (builtin_type_string): Add extern declaration.
* gdbtypes.h (create_string_type): Add prototype.
* m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY
renamed to TYPE_CODE_STRING.
* m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to
TYPE_CODE_STRING.
* mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY
renamed to TYPE_CODE_STRING.
* parse.c (length_of_subexp, prefixify_subexp): Add case for
OP_ARRAY.
* printcmd.c (print_formatted): Recognize TYPE_CODE_STRING.
* typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed
to TYPE_CODE_STRING.
* valops.c (allocate_space_in_inferior): New function and
prototype, using code ripped out of value_string.
* valops.c (value_string): Rewritten to use new function
allocate_space_in_inferior, but temporarily disabled until some
other support is in place.
* valops.c (value_array): New function to create array constants.
* valprint.c (val_print_string): Add comment to document use,
complete rewrite to fix several small buglets.
* value.h (value_array): Add prototype.
* value.h (val_print_string): Change prototype to match rewrite.
**** start-sanitize-chill ****
* ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING.
* ch-exp.y (match_character_literal): Disable recognition of
control sequence form of character literals and document why.
**** end-sanitize-chill ****
|
|
* c-valprint.c (c_val_print): Extract code for printing methods
and move it to cp_print_class_method in cp-valprint.c.
* c-valprint.c (c_val_print): Extract code to print strings and
move it to val_print_string in valprint.c.
* cp-valprint.c (cp_print_class_method): New function using
code extracted from c_val_print.
* valprint.c (val_print_string): New function using code
extracted from c_val_print.
* value.h (val_print_string): Add prototype.
**** start-sanitize-chill ****
* ch-exp.y (CHARACTER_STRING_LITERAL): Set correct token type.
* ch-exp.y (literal): Add action for CHARACTER_STRING_LITERAL.
* ch-exp.y (tempbuf, tempbufsize, tempbufindex, GROWBY_MIN_SIZE,
CHECKBUF, growbuf_by_size): New variables, macros, and support
functions for implementing a dynamically expandable temp buffer.
* ch-exp.y (match_string_literal): New lexer function.
* ch-exp.y (match_bitstring_literal): Dynamic buffer code
removed and replaced with new CHECKBUF macro.
* ch-exp.y (yylex): Call match_string_literal when appropriate.
* ch-valprint.c (ch_val_print): Add code for TYPE_CODE_PTR.
**** end-sanitize-chill ****
|
|
about dependency on target byte ordering.
**** start-sanitize-chill ****
* ch-exp.y (value_array_slice): Fix typo.
* ch-valprint.c (chill_val_print): Remove C'ism that arrays of
byte sized ints are assumed to be char strings and printed with
string syntax. In chill, arrays of chars and arrays of
bytes/ubytes are distinquishable, and printed appropriately.
**** end-sanitize-chill ****
|
|
* Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c,
m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c.
* Makefile.in (HFILES): Add valprint.h.
* Makefile.in (OBS): Add typeprint.o, c-typeprint.o,
m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o.
* typeprint.c, typeprint.h: New files for language independent
type printing functions.
* c-typeprint.c, m2-typeprint.c: New files for language dependent
type printing functions and definitions.
* valprint.h: New include file for language independent value
printing definitions.
* c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language
dependent value printing functions.
* c-exp.y (production ptype): Add range_type variable and use new
create_range_type function.
* c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab),
infcmd.c (path_var_name), language.c (unk_op_print_tab),
m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent
"const static" to ANSI-conformant "static const".
* c-exp.y (c_create_fundamental_type): Remove unused nbytes.
* c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type,
and c_val_print.
* c-lang.h (c_print_type, c_val_print): Add prototypes.
* coffread.c (decode_type): Add range_type variable and call to
new create_range_type function.
* complaints.c (complain): Remove unused val variable.
* complaints.c (_initialize_complaints): Make it void.
* convex-tdep.c (value_of_trapped_internalvar): Add range_type
variable and call new create_range_type function.
* defs.h (enum val_prettyprint): Move enum from value.h to here
so we can avoid having to include value.h just for prototypes that
need the enum (thanks ANSI).
* dwarfread.c (struct_type): Local anonymous_size variable is
only used if !BITS_BIG_ENDIAN.
* dwarfread.c (decode_subscript_data_item): Add rangetype
variable and call new create_range_type function.
* elfread.c (elf_symfile_read): Remove unused dbx and text_sect
variables.
* eval.c (evaluate_subexp): Remove unused local variable name
and the statement with no side effects that initializes it.
* expprint.c (print_subexp): Change local_printstr to
LA_PRINT_STRING.
* gdbtypes.c (create_range_type): New function that creates
a range type using code fragments from object file readers as
an example of what has to be initialized.
* gdbtypes.c (create_array_type): Removed index_type, low_bound,
and high_bound parameters, replaced with a single range_type
parameter. Change function body to use passed in range_type
rather than handcrafting one.
* gdbtypes.h (create_range_type): Add prototype.
* gdbtypes.h (create_array_type): Change prototype parameters.
* infrun.c (normal_stop): Remove unused local variables tem and c.
* infrun.c (hook_stop_stub): Return 0 rather than random value.
* language.c (unk_lang_print_type, unk_lang_val_print): Add
stub functions that call error if called.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Add initializers unk_lang_print_type and
unk_lang_val_print.
* language.h (struct language_defn): Reformat for larger
comments, add la_print_type and la_val_print members. Add
LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar
to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING.
* m2-lang.c (m2_create_fundamental_type): Remove unused local
variable nbytes.
* m2-lang.c (m2_language_defn): Add initializers m2_print_type
and m2_val_print.
* m2-lang.h (m2_print_type, m2_val_print): Add prototypes.
* main.c (execute_command): Remove unused local variable cmdlines.
* main.c (echo_command), stabsread.c (read_type), printcmd.c
(clear_displays), symmisc.c (block_depth), values.c
(clear_value_history):
Make testing of truth value of assignment result explicit.
* mipsread.c (upgrade_type): Update FIXME to include future use
of create_range_type.
* printcmd.c (ptype_command, ptype_eval, whatis_command,
whatis_exp, maintenance_print_type): Move prototypes and functions
to new typeprint.c.
* printcmd.c (_initialize_printcmd): Move add_com calls for
ptype_command and whatis_command to new typeprint.c.
* ser-bsd.c (serial_open): Remove unused variable sgttyb.
* source.c (find_source_lines): Local variable c only used
when LSEEK_NOT_LINEAR is defined.
* stabsread.c (read_array_type): Use new create_range_type
function.
* stabsread.c (read_range_type): Add new index_type variable and
call new create_range_type function rather than handcrafting
range types.
* symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE.
* symtab.c (typedef_print usages): Use c_typedef_print, renamed.
* symtab.c (type_print_base usages): Use c_type_print_base.
* symtab.c (type_print_varspec_prefix usages): Use
c_type_print_varspec_prefix.
* symtab.c (type_print_method_args usages): Use
cp_type_print_method_args.
* valprint.c: Completely ripped apart and the fragments used
to create c-valprint.c, cp-valprint.c, m2-valprint.c, and
valprint.h. Remaining stuff is language independent.
* value.h (struct fn_field): Forward declare for prototypes.
* value.h (type_print_1): Remove prototype.
* value.h (enum val_prettyprint): Moved to defs.h.
* value.h (typedef_print): Prototype renamed to c_typedef_print.
* value.h (baseclass_offset): Add prototype.
**** start-sanitize-chill ****
* Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c.
* Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o.
* ch-typeprint.c: New file for language dependent type printing.
* ch-valprint.c: New file for language dependent value printing.
* ch-exp.y (parse_number): Remove prototype and stub function.
* ch-exp.y (decode_integer_literal): Removed unused digits and
temp variables.
* ch-exp.y (convert_float): Completely ifdef out for now.
* ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5),
ch-lang.c (chill_op_print_tab):
Change from ANSI-obsolescent "const static" to ANSI-conformant
"static const".
* ch-exp.y (yylex): Add unhandled storage class enumeration
literals to switch statement for completeness.
* ch-lang.c (chill_create_fundamental_types): Remove unused
nbytes variable. Change dummy type to 2 bytes to match int.
Handle FT_VOID types gratuituously added to chill DWARF by
compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR
type rather than a one byte TYPE_CODE_INT type.
* ch-lang.c (chill_language_defn): Add chill_print_type and
chill_val_print.
* ch-lang.h (chill_print_type, chill_val_print): Add prototypes.
**** end-sanitize-chill ****
|
