| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ch-lang.c (chill_printstr chill_printchar) c-valprint.c (c_val_print)
ch-valprint.c (chill_val_print) expprint.c (print_subexp) f-lang.c
(f_printstr f_printchar emit_char) f-valprint.c (f_val_print) jv-lang.c
(java_printchar java_emit_char) jv-valprint.c (java_value_print
java_val_print) language.c (unk_lang_printchar unk_lang_printstr
unk_lang_emit_char) language.h (struct language_defn LA_PRINT_STRING
LA_EMIT_CHAR) m2-lang.c (m2_printstr m2_printchar emit_char) printcmd.c
(print_formatted) scm-lang.c (scm_printstr) valprint.c
(val_print_string) value.h (val_print_string): Add emit_char routines
to language_desc struct to allow finer control over language specific
character output issues. Add character width arg to printstr routines
to allow handling of wchar_t/Unicode strings. Fix c_printstr to handle
wide characters. Supply width argument to LA_PRINT_STRING and
val_print_string.
* jv-lang.c (java_object_type dynamics_objfile java_link_class_type
get_dynamics_objfile get_java_object_type) jv-lang.h
(get_java_object_type): Make lots of things static.
* expprint.c (dump_prefix_expression dump_subexp): Move opcode name
printing to common routine (op_name).
* (dump_subexp): Add support for OP_SCOPE.
|
|
the address of the virtual function.
From Peter Bloecher (Peter.Bloecher@eedn.ericsson.se).
* eval.c (evaluate_subexp_standard), valarith.c (value_x_unop):
Handle C++ operator *.
|
|
|
|
with 0 length. A sticky tag caused this fix from
revision 2.32 date: 1996/04/29 23:25:27; author: dawn;
state: Exp; lines: +1 -0 branches: 2.32.34;
to not make it into devo.
|
|
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
|
|
if we encounter a positive stack adjustment.
(find_proc_desc): If heuristic_fence_post is non-zero, use
heuristic_proc_start to determine the start of a function before
calling heuristic_proc_desc.
* coffread.c (coff_symtab_read): Change minimal symbol types
for C_LABEL symbols from mst_* to mst_file_*.
* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* configure.in: Handle error message from sun3 native ld when
configuring HLDFLAGS.
* configure: Regenerated with autoconf.
* c-valprint.c (c_value_print): Adjust value address by VALUE_OFFSET.
* cp-valprint.c (cp_print_value): Prevent gdb crashes by making sure
that the virtual base pointer from an user object still points to
accessible memory.
* dbxread.c (dbx_symfile_init): Initialize sym_stab_info to
clear the recently added header_files fields.
(dbx_symfile_finish): Free hfiles[i].vector to avoid storage leak.
|
|
with 0 length.
|
|
(read_one_struct_field): Support boolean bitfields.
* c-valprint.c (c_val_print): Print booleans properly.
|
|
* ch-exp.c: New file. Use recursive-descent.
Recognize labelled array tuples and powerset ranges.
* Makefile.in: Update for no longer using yacc for ch-exp.
* c-lang.c: Make various functions non-static.
* c-lang.h: Add bunches of prototypes.
* cp-valprint.c (cp_print_value_fields): Also take address.
(cp_print_value): Likewise. Use baselcass_offset.
* stabsread.c (current_symbol): New static variable.
(type_synonym_name): Remove.
(read_type): If copying, make copy be a TYPE_CODE_TYPEDEF.
(read_array_type): Don't need to handle undefined element type here.
(cleanup_undefined_types): Ditto.
(read_range_type): Look for Chill ranges.
* valops.c (value_assign): Fix case lval_internalvar - don't try
to assign into old value (which might be too small!).
(value_coerce_array): No longer need special VALUE_REPEATED handling.
(value_arg_coerce): Cleaner array->pointer decay mechanism.
(search_struct_field): Use baseclass_offset rather than
baseclass_addr.
(value_slice): Use get_discrete_bounds.
* value.h (COERCE_VARYING_ARRAY): Take type argumnt as well.
* values.c (baseclass_offset): Change parameter interface.
(baseclass_addr): Removed.
* c-typeprint.c, c-valprint.c, ch-valprint.c, values.c, valops.c:
Add check_typedef/CHECK_TYPEDEF as needed.
|
|
a value of that type; use that instead of setting VALUE_REPEATED.
* value.h (struct value): Remove fields repetitions and repeated.
(VALUE_REPEATED, VALUE_REPETITIONS): Removed, no longer used.
* c-valprint.c, ch-valprint.c, eval.c, printcmd.c, valops.c,
value.h, values.c: Simplify, since now VALUE_REPEATED is never used.
* valprint.c (value_print_array_elemen): Removed never-used function.
|
|
|
|
that contains a static instance of the class.
* cp-valprint.c (dont_print_vb_obstack): Renamed from
dont_print_obstack, made static.
(dont_print_statmem_obstack): New obstack, controls printing
of static member classes.
(_initialize_cp_valprint): Initialize it.
(cp_print_static_field): New function, handles printing of
static members.
(cp_print_value_fields): New parameter dont_print_statmem to
handle recursive printing of static member classes, use
cp_print_static_field to handle printing of static members.
* c-valprint.c (cp_print_value_fields): Update prototype and
call to include additional dont_print_statmem parameter.
* c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused
extern declaration.
* alpha-tdep.c, findvar.c, infptrace.c: Include <string.h>.
* config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call
alpha_find_saved_regs if fi->saved_regs is still NULL.
* elfread.c (elf_symtab_read): Ensure that the filename field
of a minsym is nonempty. Ignore solib trampoline symbols from
the main symbol table, they might have a bogus value.
* procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
Fix typos in comments.
|
|
target type when suppressing `(char *)' output for strings.
|
|
(omeyer@i3.informatik.rwth-aachen.de).
* valprint.h, valprint.c (stop_print_at_null): New global.
* valprint.c (_initialize_valprint): New print set subcommand
"null-stop".
* c-valprint.c (c_val_print): If stop_print_at_null is on, and
printing a char array, adjust the number of chars to print.
|
|
(init.c): Add a comment.
(top.c): Remove explicit compile action.
* breakpoint.c (mention): Share code indicating location of
break/watchpoints, don't print address if addressprint is off.
* breakpoint.c, c-typeprint.c, c-valprint.c, energize.c, symtab.h
(demangle): Remove redundant declarations.
* eval.c: Remove redundant function declarations.
* objfiles.h: Cosmetic and grammatical improvements.
* TODO: Various updates.
|
|
but would print pointers and arrays in C syntax. Instead, call
a language-specific function. See ChangeLog for details.
|
|
* c-valprint.c (c_val_print): Add vtblprint support
when using thunks.
* cp-valprint.c (cp_is_vtbl_member): A vtable can be an array of
pointers (if using thunks) as well as array of structs (otherwise).
* cp-valprint.c (vtbl_ptr_name_old, vtbl_ptr_name): Move to global
level, and make the latter non-static (so define_symbol can use it).
* stabsread.c (define_symbol): If the type being defined is a
pointer type named "__vtbl_ptr_type", set the TYPE_NAME to that name.
* symtab.h (VTBL_PREFIX_P): Allow "_VT" as well as "_vt".
* values.c (value_virtual_fn_field): Handle thunks.
* values.c (value_headof): Minor efficiency hack.
* values.c (value_headof): Incomplete thunk support. FIXME.
|
|
* printcmd.c, defs.h (print_address_numeric), callers in
symmisc.c, symfile.c, stack.c, source.c, remote.c, infcmd.c,
cp-valprint.c, core.c, ch-valprint.c, c-valprint.c, breakpoint.c,
exec.c: New argument use_local.
* source.c (identify_source_line): Use filtered output. Use
print_address_numeric.
|
|
happened after a terminating '\0'.
* c-valprint.c (c_val_print): Never add 1 to return value from
val_print_string; just return what it returns.
|
|
cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
valarith.c, valops.c, valprint.c, value.h, values.c: Replace
value with value_ptr. This is for the ptx compiler.
* objfiles.h, target.h: Don't declare a "sec_ptr" field using a
"sec_ptr" typedef.
* symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
#if 0 i386_float_info.
* symm-tdep.c (round): Remove. Also remove sgttyb.
* symm-tdep.c: Remove lots of stuff which duplicates stuff from
i386-tdep.c. Remove register_addr and ptx_coff_regno_to_gdb.
* i386-tdep.c (i386_frame_find_saved_regs): Put in
I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
someday.
* config/i386/nm-symmetry.h: Change KERNEL_U_ADDR. Move
stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
symm-nat.c. Define CHILD_WAIT and declare child_wait().
* config/i386/tm-symmetry.h: Remove call function stuff; stuff in
tm-i386v.h is apparently OK.
* config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
HAVE_TERMIO. Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
USE_O_NOCTTY.
|
|
various miscellaneous things discovered in the process:
* printcmd.c, defs.h (print_address_numeric): New function.
* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
Use it.
* utils.c, defs.h (gdb_print_address): New function.
* expprint (dump_expression), gdbtypes.h: Use it.
* breakpoint.c (describe_other_breakpoints),
symmisc.c (dump_symtab, print_symbol):
Use filtered not unfiltered I/O.
(remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
just run gdb under a debugger for this (and it had problems with
printing addresses, how to print b->shadow, etc.).
* buildsym.c (make_blockvector), core.c (memory_error),
exec.c (print_section_info), maint.c (print_section_table),
mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Add comments saying code is broken. Marked with "FIXME-32x64".
* dbxread.c (process_one_symbol), partial-stab.h (default),
remote-vx.c (vx_run_files_info):
Don't cast int being passed to local_hex_string.
* symmisc.c (print_symbol): Don't cast long being passed to %lx.
* symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
only being a long.
* symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
and LOC_LOCAL.
* printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
* source.c: Include <sys/types.h> regardless of USG.
|
|
* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
Use extract_unsigned_integer to get the address of a reference.
|
|
|
|
ChangeLog symtab.c c-valprint.c
* symtab (decode_line_1): fix a bug when position char is not
set correctly.
* c-valprint (c_val_print): handle vtbl printing when vtbl is not
set up yet.
|
|
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
|
|
c-valprint.c
Log messages:
* c-valprint.c: to fix virtual table print bug (pr2695)
|
|
* symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES.
Clean up problems with targets and hosts that have 64 bit longs
and pointers and 32 bit ints.
* breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c,
ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c,
expprint.c, gdbtypes.c, infcmd.c, language.c, language.h,
m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h,
printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Change all printf formats from %x to %lx if outputting an address.
Change la_*_format to use long format.
local_hex_string, local_hex_string_custom now take an unsigned long
argument, change all callers.
* coffread.c (read_coff_symtab): Remove superfluous cast for
complaint output.
* dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int.
* findvar.c, value.h (write_register): Change register value to long.
* gdbtypes.h (struct type): Change `bitsize' to long as
TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer.
* inferior.h (struct inferior_status): Change type of stop_pc to
CORE_ADDR.
* language.h (local_octal_string, local_octal_string_custom):
Remove prototype, the functions are neither defined nor used.
* mipsread.c (parse_symbol): Use temporary variable for bitsize as
f->bitsize is a long now.
* objfiles.c (add_to_objfile_sections, build_objfile_section_table):
Use unsigned long casts instead of int for abusing sections_end
pointer as integer.
* stack.c (parse_frame_specification): Change type of `args' to
CORE_ADDR for SETUP_ARBITRARY_FRAME.
* printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE.
* mipsread.c (parse_type): Alpha cc now supports the t->continued
bit, update algorithm to match the way the compiler uses it.
|
|
|
|
arrays.
|
|
* stabsread.c: Type -16 is 4 bytes.
|
|
* c-valprint.c (c_val_print): For array of chars printed with
string syntax, don't print the address of the array. From
bothner@cygnus.com.
* c-exp.y (yylex): Recognize '.' as indicating a floating point
number regardless of the radix. From wilson@cygnus.com.
* valprint.c (set_input_radix_1, set_output_radix_1): New
prototypes and functions that do the actual radix setting work.
* valprint.c (set_radix, set_output_radix, set_input_radix):
Rewrite to use set_input_radix_1 and set_output_radix_1.
* valprint.c (initialize_valprint): Enable commands to
independently set and show input and output radices.
* valprint.c (show_radix): New prototype and function that
handles separate input and output radices.
|
|
when compiling with gcc, but disable it for now. See comment.
* defs.h (LONGEST): Define as either "long" or "long long"
based on CC_HAS_LONG_LONG.
* defs.h (longest_to_int): Use CC_HAS_LONG_LONG to control
how longest_to_int is defined.
* c-valprint.c (c_val_print): Call print_longest.
* expprint.c (dump_expression): Use PRINTF_HAS_LONG_LONG
instead of LONG_LONG.
* {printcmd.c, gdbtypes.h} (LONG_LONG): Replace usages with
CC_HAS_LONG_LONG.
* printcmd.c (print_scalar_formatted): Call print_longest
and let it figure out what to do for PRINTF_HAS_LONG_LONG.
* typeprint.c (print_type_scalar): Call print_longest and let
it figure out what to do for PRINTF_HAS_LONG_LONG.
* valprint.c (val_print_type_code_int): Call print_longest
and let it figure out what to do for PRINTF_HAS_LONG_LONG.
* stabsread.c (LONG_LONG): Replace usages with CC_HAS_LONG_LONG.
* value.h (struct value): Replace usage of LONG_LONG with
CC_HAS_LONG_LONG.
* value.h (print_longest): Add prototype.
* values.c (LONG_LONG): Replace usages with CC_HAS_LONG_LONG.
* values.c (unpack_double): Collapse code that was unnecessarily
dependent on CC_HAS_LONG_LONG. Use LONGEST instead of direct types.
* values.c (value_from_longest): Remove dependency on
CC_HAS_LONG_LONG and just use LONGEST.
* solib.c (solib_map_sections): Use bfd_get_filename
to access filename field.
* solib.c (clear_solib): Save filename and free it later, after
bfd_close, since bfd_close may reference it. Use bfd_get_filename
to access the field.
* config/convex/xm-convex.h (LONG_LONG): Replace with
CC_HAS_LONG_LONG. Add define for PRINTF_HAS_LONG_LONG.
* doc/gdbint.texinfo (LONG_LONG): Replace with CC_HAS_LONG_LONG.
Add PRINTF_HAS_LONG_LONG references.
|
|
so that it only happens on big-endian targets; so that it only
happens if the short or char argument is aligned on an int
boundary; and so that it changes the location, rather than the
type, of the argument. These changes tend to parallel similar
(old) changes in stabsread.c.
* coffread.c (coff_read_enum_type): Use the specified size for
enums, don't assume that they are int-sized.
* c-valprint.c (c_val_print): Don't assume enums are the same as
ints.
|
|
of array constants using the obvious syntax.
* c-valprint.c (c_val_print): Set printed string length.
* dwarfread.c (read_tag_string_type): New prototype and
function that handles TAG_string_type DIEs.
* dwarfread.c (process_dies): Add case for TAG_string_type
that calls new read_tag_string_type function.
* expprint.c (print_subexp): Add support for OP_ARRAY.
* gdbtypes.c (create_range_type, create_array_type): Inherit
objfile from the index type.
**** start-sanitize-chill ****
* ch-typeprint.c (chill_print_type): Add case for
TYPE_CODE_STRING.
* ch-valprint.c (chill_val_print): Fix case for
TYPE_CODE_STRING.
**** end-sanitize-chill ****
|
|
constants with an explicit null byte terminator. OP_STRING is
now used for real string types.
* c-lang.c (builtin_type_*): Move declarations to lang.c since
they are used by all languages.
* c-lang.c (_initialize_c_language): Move initializations of
builtin_type_* to lang.c.
* c-typeprint.c (c_type_print_varspec_prefix,
c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed
to TYPE_CODE_STRING.
* c-valprint.c (c_val_print): Change the way character arrays
are printed as strings to be consistent with the way strings
are printed when pointer-to-char types are dereferenced.
Remove test of print_max before calling val_print_string, which
now does it's own test.
* eval.c (evaluate_subexp): Add case for OP_ARRAY.
* expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY.
* expression.h (enum exp_opcode): Add OP_ARRAY and document.
* gdbtypes.c (builtin_type_*): Add declarations moved from
c-lang.c.
* gdbtypes.c (create_string_type): New function to create real
string types.
* gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY
renamed to TYPE_CODE_STRING.
* gdbtypes.c (_initialize_gdbtypes): Add initializations of
builtin_type_* types moved from c-lang.c.
* gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed
to TYPE_CODE_STRING.
* gdbtypes.h (builtin_type_string): Add extern declaration.
* gdbtypes.h (create_string_type): Add prototype.
* m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY
renamed to TYPE_CODE_STRING.
* m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to
TYPE_CODE_STRING.
* mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY
renamed to TYPE_CODE_STRING.
* parse.c (length_of_subexp, prefixify_subexp): Add case for
OP_ARRAY.
* printcmd.c (print_formatted): Recognize TYPE_CODE_STRING.
* typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed
to TYPE_CODE_STRING.
* valops.c (allocate_space_in_inferior): New function and
prototype, using code ripped out of value_string.
* valops.c (value_string): Rewritten to use new function
allocate_space_in_inferior, but temporarily disabled until some
other support is in place.
* valops.c (value_array): New function to create array constants.
* valprint.c (val_print_string): Add comment to document use,
complete rewrite to fix several small buglets.
* value.h (value_array): Add prototype.
* value.h (val_print_string): Change prototype to match rewrite.
**** start-sanitize-chill ****
* ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING.
* ch-exp.y (match_character_literal): Disable recognition of
control sequence form of character literals and document why.
**** end-sanitize-chill ****
|
|
* c-valprint.c (c_val_print): Extract code for printing methods
and move it to cp_print_class_method in cp-valprint.c.
* c-valprint.c (c_val_print): Extract code to print strings and
move it to val_print_string in valprint.c.
* cp-valprint.c (cp_print_class_method): New function using
code extracted from c_val_print.
* valprint.c (val_print_string): New function using code
extracted from c_val_print.
* value.h (val_print_string): Add prototype.
**** start-sanitize-chill ****
* ch-exp.y (CHARACTER_STRING_LITERAL): Set correct token type.
* ch-exp.y (literal): Add action for CHARACTER_STRING_LITERAL.
* ch-exp.y (tempbuf, tempbufsize, tempbufindex, GROWBY_MIN_SIZE,
CHECKBUF, growbuf_by_size): New variables, macros, and support
functions for implementing a dynamically expandable temp buffer.
* ch-exp.y (match_string_literal): New lexer function.
* ch-exp.y (match_bitstring_literal): Dynamic buffer code
removed and replaced with new CHECKBUF macro.
* ch-exp.y (yylex): Call match_string_literal when appropriate.
* ch-valprint.c (ch_val_print): Add code for TYPE_CODE_PTR.
**** end-sanitize-chill ****
|
|
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
language_unknown.
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
completion_list_add_name.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE): New macros.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
appropriate.
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
demangling.
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
deduce_language_from_filename.
|
|
* Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c,
m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c.
* Makefile.in (HFILES): Add valprint.h.
* Makefile.in (OBS): Add typeprint.o, c-typeprint.o,
m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o.
* typeprint.c, typeprint.h: New files for language independent
type printing functions.
* c-typeprint.c, m2-typeprint.c: New files for language dependent
type printing functions and definitions.
* valprint.h: New include file for language independent value
printing definitions.
* c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language
dependent value printing functions.
* c-exp.y (production ptype): Add range_type variable and use new
create_range_type function.
* c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab),
infcmd.c (path_var_name), language.c (unk_op_print_tab),
m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent
"const static" to ANSI-conformant "static const".
* c-exp.y (c_create_fundamental_type): Remove unused nbytes.
* c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type,
and c_val_print.
* c-lang.h (c_print_type, c_val_print): Add prototypes.
* coffread.c (decode_type): Add range_type variable and call to
new create_range_type function.
* complaints.c (complain): Remove unused val variable.
* complaints.c (_initialize_complaints): Make it void.
* convex-tdep.c (value_of_trapped_internalvar): Add range_type
variable and call new create_range_type function.
* defs.h (enum val_prettyprint): Move enum from value.h to here
so we can avoid having to include value.h just for prototypes that
need the enum (thanks ANSI).
* dwarfread.c (struct_type): Local anonymous_size variable is
only used if !BITS_BIG_ENDIAN.
* dwarfread.c (decode_subscript_data_item): Add rangetype
variable and call new create_range_type function.
* elfread.c (elf_symfile_read): Remove unused dbx and text_sect
variables.
* eval.c (evaluate_subexp): Remove unused local variable name
and the statement with no side effects that initializes it.
* expprint.c (print_subexp): Change local_printstr to
LA_PRINT_STRING.
* gdbtypes.c (create_range_type): New function that creates
a range type using code fragments from object file readers as
an example of what has to be initialized.
* gdbtypes.c (create_array_type): Removed index_type, low_bound,
and high_bound parameters, replaced with a single range_type
parameter. Change function body to use passed in range_type
rather than handcrafting one.
* gdbtypes.h (create_range_type): Add prototype.
* gdbtypes.h (create_array_type): Change prototype parameters.
* infrun.c (normal_stop): Remove unused local variables tem and c.
* infrun.c (hook_stop_stub): Return 0 rather than random value.
* language.c (unk_lang_print_type, unk_lang_val_print): Add
stub functions that call error if called.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Add initializers unk_lang_print_type and
unk_lang_val_print.
* language.h (struct language_defn): Reformat for larger
comments, add la_print_type and la_val_print members. Add
LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar
to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING.
* m2-lang.c (m2_create_fundamental_type): Remove unused local
variable nbytes.
* m2-lang.c (m2_language_defn): Add initializers m2_print_type
and m2_val_print.
* m2-lang.h (m2_print_type, m2_val_print): Add prototypes.
* main.c (execute_command): Remove unused local variable cmdlines.
* main.c (echo_command), stabsread.c (read_type), printcmd.c
(clear_displays), symmisc.c (block_depth), values.c
(clear_value_history):
Make testing of truth value of assignment result explicit.
* mipsread.c (upgrade_type): Update FIXME to include future use
of create_range_type.
* printcmd.c (ptype_command, ptype_eval, whatis_command,
whatis_exp, maintenance_print_type): Move prototypes and functions
to new typeprint.c.
* printcmd.c (_initialize_printcmd): Move add_com calls for
ptype_command and whatis_command to new typeprint.c.
* ser-bsd.c (serial_open): Remove unused variable sgttyb.
* source.c (find_source_lines): Local variable c only used
when LSEEK_NOT_LINEAR is defined.
* stabsread.c (read_array_type): Use new create_range_type
function.
* stabsread.c (read_range_type): Add new index_type variable and
call new create_range_type function rather than handcrafting
range types.
* symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE.
* symtab.c (typedef_print usages): Use c_typedef_print, renamed.
* symtab.c (type_print_base usages): Use c_type_print_base.
* symtab.c (type_print_varspec_prefix usages): Use
c_type_print_varspec_prefix.
* symtab.c (type_print_method_args usages): Use
cp_type_print_method_args.
* valprint.c: Completely ripped apart and the fragments used
to create c-valprint.c, cp-valprint.c, m2-valprint.c, and
valprint.h. Remaining stuff is language independent.
* value.h (struct fn_field): Forward declare for prototypes.
* value.h (type_print_1): Remove prototype.
* value.h (enum val_prettyprint): Moved to defs.h.
* value.h (typedef_print): Prototype renamed to c_typedef_print.
* value.h (baseclass_offset): Add prototype.
**** start-sanitize-chill ****
* Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c.
* Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o.
* ch-typeprint.c: New file for language dependent type printing.
* ch-valprint.c: New file for language dependent value printing.
* ch-exp.y (parse_number): Remove prototype and stub function.
* ch-exp.y (decode_integer_literal): Removed unused digits and
temp variables.
* ch-exp.y (convert_float): Completely ifdef out for now.
* ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5),
ch-lang.c (chill_op_print_tab):
Change from ANSI-obsolescent "const static" to ANSI-conformant
"static const".
* ch-exp.y (yylex): Add unhandled storage class enumeration
literals to switch statement for completeness.
* ch-lang.c (chill_create_fundamental_types): Remove unused
nbytes variable. Change dummy type to 2 bytes to match int.
Handle FT_VOID types gratuituously added to chill DWARF by
compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR
type rather than a one byte TYPE_CODE_INT type.
* ch-lang.c (chill_language_defn): Add chill_print_type and
chill_val_print.
* ch-lang.h (chill_print_type, chill_val_print): Add prototypes.
**** end-sanitize-chill ****
|
