aboutsummaryrefslogtreecommitdiff
path: root/gdb/buildsym-legacy.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-17Fix line table regressionTom Tromey1-1/+1
Simon pointed out a line table regression, and after a couple of false starts, I was able to reproduce it by hand using his instructions. The bug is that most of the code in do_mixed_source_and_assembly uses unrelocated addresses, but one spot does: pc = low; ... after the text offset has been removed. This patch fixes the problem by introducing a new type to represent unrelocated addresses in the line table. This prevents this sort of bug to some degree (it's still possible to manipulate a CORE_ADDR in a bad way, this is unavoidable). However, this did let the compiler flag a few spots in that function, and now it's not possible to compare an unrelocated address from a line table with an ordinary CORE_ADDR. Regression tested on x86-64 Fedora 36, though note this setup never reproduced the bug in the first place. I also tested it by hand on the disasm-optim test program.
2023-02-08Do not pass section index to end_compunit_symtabTom Tromey1-2/+2
Right now, the section index passed to end_compunit_symtab is always SECT_OFF_TEXT. Remove this parameter and simply always use SECT_OFF_TEXT.
2023-01-01Update copyright year range in header of all files managed by GDBJoel Brobecker1-1/+1
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023.
2022-04-04gdb/buildsym: Line record use a record flagLancelot SIX1-1/+1
Currently when recording a line entry (with buildsym_compunit::record_line), a boolean argument argument is used to indicate that the is_stmt flag should be set for this particular record. As a later commit will add support for new flags, instead of adding a parameter to record_line for each possible flag, transform the current is_stmt parameter into a enum flag. This flags parameter will allow greater flexibility in future commits. This enum flags type is not propagated into the linetable_entry type as this would require a lot of changes across the codebase for no practical gain (it currently uses a bitfield where each interesting flag only occupy 1 bit in the structure). Tested on x86_64-linux, no regression observed. Change-Id: I5d061fa67bdb34918742505ff983d37453839d6a
2022-04-04gdb: rename start_symtab/end_symtab to start_compunit_symtab/end_compunit_symtabSimon Marchi1-9/+10
It's a bit confusing because we have both "compunit_symtab" and "symtab" types, and many methods and functions containing "start_symtab" or "end_symtab", which actually deal with compunit_symtabs. I believe this comes from the time before compunit_symtab was introduced, where symtab did the job of both. Rename everything I found containing start_symtab or end_symtab to use start_compunit_symtab or end_compunit_symtab. Change-Id: If3849b156f6433640173085ad479b6a0b085ade2
2022-04-04gdb: remove some unused buildsym-legacy functionsSimon Marchi1-89/+0
Pretty much self-explanatory. Change-Id: I5b658d017cd891ecdd1df61075eacb0f44316935
2022-02-06gdb: remove COMPUNIT_DIRNAME macro, add getter/setterSimon Marchi1-1/+1
Add a getter and a setter for a compunit_symtab's dirname. Remove the corresponding macro and adjust all callers. Change-Id: If2f39b295fd26822586485e04a8b8b5aa5cc9b2e
2022-02-06gdb: remove COMPUNIT_OBJFILE macroSimon Marchi1-1/+1
Remove the macro, update all users to use the getter directly. Change-Id: I3f0fd6f4455d1c4ebd5da73b561eb18a979ef1f6
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker1-1/+1
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker1-1/+1
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-03-10gdb: Add support for tracking the DWARF line table is-stmt fieldAndrew Burgess1-1/+3
This commit brings support for the DWARF line table is_stmt field to GDB. The is_stmt field is used by the compiler when a single source line is split into multiple assembler instructions, especially if the assembler instructions are interleaved with instruction from other source lines. The compiler will set the is_stmt flag false from some instructions from the source lines, these instructions are not a good place to insert a breakpoint in order to stop at the source line. Instructions which are marked with the is_stmt flag true are a good place to insert a breakpoint for that source line. Currently GDB ignores all instructions for which is_stmt is false. This is fine in a lot of cases, however, there are some cases where this means the debug experience is not as good as it could be. Consider stopping at a random instruction, currently this instruction will be attributed to the last line table entry before this point for which is_stmt was true - as these are the only line table entries that GDB tracks. This can easily be incorrect in code with even a low level of optimisation. With is_stmt tracking in place, when stopping at a random instruction we now attribute the instruction back to the real source line, even when is_stmt is false for that instruction in the line table. When inserting breakpoints we still select line table entries for which is_stmt is true, so the breakpoint placing behaviour should not change. When stepping though code (at the line level, not the instruction level) we will still stop at instruction where is_stmt is true, I think this is more likely to be the desired behaviour. Instruction stepping is, of course, unchanged, stepping one instruction at a time, but we should now report more accurate line table information with each instruction step. The original motivation for this work was a patch posted by Bernd here: https://sourceware.org/ml/gdb-patches/2019-11/msg00792.html As part of that thread it was suggested that many issues would be resolved if GDB supported line table views, this isn't something I've attempted in this patch, though reading the spec, it seems like this would be a useful feature to support in GDB in the future. The spec is here: http://dwarfstd.org/ShowIssue.php?issue=170427.1 And Bernd gives a brief description of the benefits here: https://sourceware.org/ml/gdb-patches/2020-01/msg00147.html With that all said, I think that there is benefit to having proper is_stmt support regardless of whether we have views support, so I think we should consider getting this in first, and then building view support on top of this. The gdb.cp/step-and-next-inline.exp test is based off a test proposed by Bernd Edlinger in this message: https://sourceware.org/ml/gdb-patches/2019-12/msg00842.html gdb/ChangeLog: * buildsym-legacy.c (record_line): Pass extra parameter to record_line. * buildsym.c (buildsym_compunit::record_line): Take an extra parameter, reduce duplication in the line table, and record the is_stmt flag in the line table. * buildsym.h (buildsym_compunit::record_line): Add extra parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Ignore non-statement lines. * dwarf2/read.c (dwarf_record_line_1): Add extra parameter, pass this to the symtab builder. (dwarf_finish_line): Pass extra parameter to dwarf_record_line_1. (lnp_state_machine::record_line): Pass a suitable is_stmt flag through to dwarf_record_line_1. * infrun.c (process_event_stop_test): When stepping, don't stop at a non-statement instruction, and only refresh the step info when we land in the middle of a line's range. Also add an extra comment. * jit.c (jit_symtab_line_mapping_add_impl): Initialise is_stmt field. * record-btrace.c (btrace_find_line_range): Only record lines marked as is-statement. * stack.c (frame_show_address): Show the frame address if we are in a non-statement sal. * symmisc.c (dump_symtab_1): Print the is_stmt flag. (maintenance_print_one_line_table): Print a header for the is_stmt column, and include is_stmt information in the output. * symtab.c (find_pc_sect_line): Find lines marked as statements in preference to non-statements. (find_pcs_for_symtab_line): Prefer is-statement entries. (find_line_common): Likewise. * symtab.h (struct linetable_entry): Add is_stmt field. (struct symtab_and_line): Likewise. * xcoffread.c (arrange_linetable): Initialise is_stmt field when arranging the line table. gdb/testsuite/ChangeLog: * gdb.cp/step-and-next-inline.cc: New file. * gdb.cp/step-and-next-inline.exp: New file. * gdb.cp/step-and-next-inline.h: New file. * gdb.dwarf2/dw2-is-stmt.c: New file. * gdb.dwarf2/dw2-is-stmt.exp: New file. * gdb.dwarf2/dw2-is-stmt-2.c: New file. * gdb.dwarf2/dw2-is-stmt-2.exp: New file. * gdb.dwarf2/dw2-ranges-base.exp: Update line table pattern.
2020-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files.
2019-07-10Don't include gdbarch.h from defs.hTom Tromey1-0/+1
I touched symtab.h and was surprised to see how many files were rebuilt. I looked into it a bit, and found that defs.h includes gdbarch.h, which in turn includes many things. gdbarch.h is only needed by a minority ofthe files in gdb, so this patch removes the include from defs.h and updates the fallout. I did "wc -l" on the files in build/gdb/.deps; this patch reduces the line count from 139935 to 137030; so there are definitely future build-time savings here. Note that while I configured with --enable-targets=all, it's possible that some *-nat.c file needs an update. I could not test all of these. The buildbot caught a few problems along these lines. gdb/ChangeLog 2019-07-10 Tom Tromey <tom@tromey.com> * defs.h: Don't include gdbarch.h. * aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h, alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h, ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c, cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h, cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c, compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c, cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c, dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c, dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c, dwarf2expr.c, expression.h, f-lang.c, frame-base.c, frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h, go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c, i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c, linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c, mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c, objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c, parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c, record-btrace.c, record.h, regcache-dump.c, regcache.h, riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y, sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c, sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c, sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h, target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c, tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c, utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c, xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update. * s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
2019-04-06Revert the header-sorting patchTom Tromey1-2/+0
Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert.
2019-04-05Sort includes for files gdb/[a-f]*.[chyl].Tom Tromey1-0/+2
This patch sorts the include files for the files [a-f]*.[chyl]. The patch was written by a script. Tested by the buildbot. I will follow up with patches to sort the remaining files, by sorting a subset, testing them, and then checking them in. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> * ft32-tdep.c: Sort headers. * frv-tdep.c: Sort headers. * frv-linux-tdep.c: Sort headers. * frame.c: Sort headers. * frame-unwind.c: Sort headers. * frame-base.c: Sort headers. * fork-child.c: Sort headers. * findvar.c: Sort headers. * findcmd.c: Sort headers. * filesystem.c: Sort headers. * filename-seen-cache.h: Sort headers. * filename-seen-cache.c: Sort headers. * fbsd-tdep.c: Sort headers. * fbsd-nat.h: Sort headers. * fbsd-nat.c: Sort headers. * f-valprint.c: Sort headers. * f-typeprint.c: Sort headers. * f-lang.c: Sort headers. * extension.h: Sort headers. * extension.c: Sort headers. * extension-priv.h: Sort headers. * expprint.c: Sort headers. * exec.h: Sort headers. * exec.c: Sort headers. * exceptions.c: Sort headers. * event-top.c: Sort headers. * event-loop.c: Sort headers. * eval.c: Sort headers. * elfread.c: Sort headers. * dwarf2read.h: Sort headers. * dwarf2read.c: Sort headers. * dwarf2loc.c: Sort headers. * dwarf2expr.h: Sort headers. * dwarf2expr.c: Sort headers. * dwarf2-frame.c: Sort headers. * dwarf2-frame-tailcall.c: Sort headers. * dwarf-index-write.h: Sort headers. * dwarf-index-write.c: Sort headers. * dwarf-index-common.c: Sort headers. * dwarf-index-cache.h: Sort headers. * dwarf-index-cache.c: Sort headers. * dummy-frame.c: Sort headers. * dtrace-probe.c: Sort headers. * disasm.h: Sort headers. * disasm.c: Sort headers. * disasm-selftests.c: Sort headers. * dictionary.c: Sort headers. * dicos-tdep.c: Sort headers. * demangle.c: Sort headers. * dcache.h: Sort headers. * dcache.c: Sort headers. * darwin-nat.h: Sort headers. * darwin-nat.c: Sort headers. * darwin-nat-info.c: Sort headers. * d-valprint.c: Sort headers. * d-namespace.c: Sort headers. * d-lang.c: Sort headers. * ctf.c: Sort headers. * csky-tdep.c: Sort headers. * csky-linux-tdep.c: Sort headers. * cris-tdep.c: Sort headers. * cris-linux-tdep.c: Sort headers. * cp-valprint.c: Sort headers. * cp-support.c: Sort headers. * cp-namespace.c: Sort headers. * cp-abi.c: Sort headers. * corelow.c: Sort headers. * corefile.c: Sort headers. * continuations.c: Sort headers. * completer.h: Sort headers. * completer.c: Sort headers. * complaints.c: Sort headers. * coffread.c: Sort headers. * coff-pe-read.c: Sort headers. * cli-out.h: Sort headers. * cli-out.c: Sort headers. * charset.c: Sort headers. * c-varobj.c: Sort headers. * c-valprint.c: Sort headers. * c-typeprint.c: Sort headers. * c-lang.c: Sort headers. * buildsym.c: Sort headers. * buildsym-legacy.c: Sort headers. * build-id.h: Sort headers. * build-id.c: Sort headers. * btrace.c: Sort headers. * bsd-uthread.c: Sort headers. * breakpoint.h: Sort headers. * breakpoint.c: Sort headers. * break-catch-throw.c: Sort headers. * break-catch-syscall.c: Sort headers. * break-catch-sig.c: Sort headers. * blockframe.c: Sort headers. * block.c: Sort headers. * bfin-tdep.c: Sort headers. * bfin-linux-tdep.c: Sort headers. * bfd-target.c: Sort headers. * bcache.c: Sort headers. * ax-general.c: Sort headers. * ax-gdb.h: Sort headers. * ax-gdb.c: Sort headers. * avr-tdep.c: Sort headers. * auxv.c: Sort headers. * auto-load.c: Sort headers. * arm-wince-tdep.c: Sort headers. * arm-tdep.c: Sort headers. * arm-symbian-tdep.c: Sort headers. * arm-pikeos-tdep.c: Sort headers. * arm-obsd-tdep.c: Sort headers. * arm-nbsd-tdep.c: Sort headers. * arm-nbsd-nat.c: Sort headers. * arm-linux-tdep.c: Sort headers. * arm-linux-nat.c: Sort headers. * arm-fbsd-tdep.c: Sort headers. * arm-fbsd-nat.c: Sort headers. * arm-bsd-tdep.c: Sort headers. * arch-utils.c: Sort headers. * arc-tdep.c: Sort headers. * arc-newlib-tdep.c: Sort headers. * annotate.h: Sort headers. * annotate.c: Sort headers. * amd64-windows-tdep.c: Sort headers. * amd64-windows-nat.c: Sort headers. * amd64-tdep.c: Sort headers. * amd64-sol2-tdep.c: Sort headers. * amd64-obsd-tdep.c: Sort headers. * amd64-obsd-nat.c: Sort headers. * amd64-nbsd-tdep.c: Sort headers. * amd64-nbsd-nat.c: Sort headers. * amd64-nat.c: Sort headers. * amd64-linux-tdep.c: Sort headers. * amd64-linux-nat.c: Sort headers. * amd64-fbsd-tdep.c: Sort headers. * amd64-fbsd-nat.c: Sort headers. * amd64-dicos-tdep.c: Sort headers. * amd64-darwin-tdep.c: Sort headers. * amd64-bsd-nat.c: Sort headers. * alpha-tdep.c: Sort headers. * alpha-obsd-tdep.c: Sort headers. * alpha-nbsd-tdep.c: Sort headers. * alpha-mdebug-tdep.c: Sort headers. * alpha-linux-tdep.c: Sort headers. * alpha-linux-nat.c: Sort headers. * alpha-bsd-tdep.c: Sort headers. * alpha-bsd-nat.c: Sort headers. * aix-thread.c: Sort headers. * agent.c: Sort headers. * addrmap.c: Sort headers. * ada-varobj.c: Sort headers. * ada-valprint.c: Sort headers. * ada-typeprint.c: Sort headers. * ada-tasks.c: Sort headers. * ada-lang.c: Sort headers. * aarch64-tdep.c: Sort headers. * aarch64-ravenscar-thread.c: Sort headers. * aarch64-newlib-tdep.c: Sort headers. * aarch64-linux-tdep.c: Sort headers. * aarch64-linux-nat.c: Sort headers. * aarch64-fbsd-tdep.c: Sort headers. * aarch64-fbsd-nat.c: Sort headers. * aarch32-linux-nat.c: Sort headers.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-07-22Simple unused variable removalsTom Tromey1-2/+0
This patch holds all the straightforward unused variable deletions. gdb/ChangeLog 2018-07-22 Tom Tromey <tom@tromey.com> * guile/scm-value.c (gdbscm_value_call): Remove unused variables. * guile/scm-math.c (vlscm_unop_gdbthrow, vlscm_binop_gdbthrow) (vlscm_convert_typed_value_from_scheme): Remove unused variable. * buildsym-legacy.c (get_macro_table): Remove unused variable. * stack.c (frame_apply_level_command): Remove unused variable. * tic6x-tdep.c (tic6x_push_dummy_call): Remove unused variable. * sparc64-tdep.c (adi_examine_command): Remove unused variable. * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Remove unused variable. * nios2-tdep.c (nios2_push_dummy_call): Remove unused variable. * mep-tdep.c (mep_push_dummy_call): Remove unused variable. * ada-lang.c (ada_lookup_symbol_list_worker): Remove unused variable. * amd64-tdep.c (amd64_supply_xsave): Remove unused variable. * arm-tdep.c (arm_record_data_proc_misc_ld_str): Remove unused variable. * breakpoint.c (check_no_tracepoint_commands, update_watchpoint): Remove unused variable. * cli/cli-script.c (recurse_read_control_structure): Remove unused variable. * common/tdesc.c (print_xml_feature::visit): Remove unused variable. * compile/compile-object-load.c (store_regs): Remove unused variables. * complaints.c (clear_complaints): Remove unused variable. * corelow.c (core_target_open): Remove unused variable. * fbsd-tdep.c (fbsd_core_info_proc_status): Remove unused variable. * guile/scm-frame.c (gdbscm_frame_read_var): Remove unused variable. * guile/scm-symtab.c (stscm_print_sal_smob): Remove unused variable. * guile/scm-type.c (gdbscm_field_baseclass_p): Remove unused variable. * guile/scm-utils.c (gdbscm_parse_function_args): Remove unused variable. * hppa-tdep.c (hppa_stub_frame_unwind_cache): Remove unused variable. * ia64-tdep.c (examine_prologue): Remove unused variable. * infcall.c (run_inferior_call): Remove unused variable. * inferior.c (exit_inferior): Remove unused variable. * infrun.c (infrun_thread_ptid_changed): Remove unused variable. * linespec.c (decode_line_2): Remove unused variable. * linux-nat.c (super_close): Remove. * linux-tdep.c (linux_info_proc): Remove unused variable. * mi/mi-main.c (mi_execute_command): Remove unused variable. * microblaze-linux-tdep.c (microblaze_linux_sigtramp_cache): Remove unused variable. * parse.c (find_minsym_type_and_address): Remove unused variable. * printcmd.c (info_symbol_command, printf_floating): Remove unused variable. * python/py-breakpoint.c (bppy_set_commands): Remove unused variable. * python/py-unwind.c (unwind_infopy_dealloc): Remove unused variables. * record-btrace.c (record_btrace_target::store_registers): Remove unused variable. (cmd_show_record_btrace_cpu): Remove unused variable. * riscv-tdep.c (riscv_register_reggroup_p) (riscv_push_dummy_call, riscv_return_value): Remove unused variable. * rust-exp.y (literal): Remove unused variable. * rust-lang.c (rust_evaluate_subexp) <OP_RUST_ARARAY>: Remove unused variable. <STRUCTOP_ANONYMOUS>: Likewise. * s390-linux-tdep.c (s390_linux_init_abi_31) (s390_linux_init_abi_64): Remove unused variable. * ser-ming2.c (ser_windows_read_prim, pipe_select_thread) (file_select_thread, net_windows_open, _initialize_ser_windows): Remove unused variables. * symtab.c (find_pc_sect_line): Remove unused variable. * target-memory.c (compute_garbled_blocks): Remove unused variable. (target_write_memory_blocks): Remove unused variable. * target.c (target_stack::unpush): Remove unused variables. * tracepoint.c (start_tracing, all_tracepoint_actions) (merge_uploaded_trace_state_variables) (print_one_static_tracepoint_marker): Remove unused variable. * unittests/basic_string_view/element_access/char/1.cc (test01): Remove unused variable. * windows-nat.c (windows_continue, windows_add_all_dlls) (do_initial_windows_stuff, windows_nat_target::create_inferior): Remove unused variables.
2018-07-20Remove some unused buildsym functionsTom Tromey1-38/+0
Now that the DWARF reader uses the builder-based API, we can remove a few "legacy" functions that were only ever called by it. gdb/ChangeLog 2018-07-20 Tom Tromey <tom@tromey.com> * buildsym-legacy.h (augment_type_symtab): Don't declare. (end_expandable_symtab): Likewise. (end_symtab_get_static_block): Likewise. (end_symtab_from_static_block): Likewise. * buildsym-legacy.c (augment_type_symtab): Remove. (end_expandable_symtab): Remove. (end_symtab_get_static_block): Remove. (end_symtab_from_static_block): Remove.
2018-07-20Parameterize cp_scan_for_anonymous_namespacesTom Tromey1-0/+9
This changes cp_scan_for_anonymous_namespaces to use the buildsym_compunit API, rather than the function-based API. gdb/ChangeLog 2018-07-20 Tom Tromey <tom@tromey.com> * stabsread.c (define_symbol): Update. * buildsym-legacy.h (get_buildsym_compunit): Declare. * dwarf2read.c (new_symbol): Update. * cp-support.h (cp_scan_for_anonymous_namespaces): Update. * cp-namespace.c: Include buildsym.h. (cp_scan_for_anonymous_namespaces): Add "compunit" parameter. * buildsym-legacy.c (get_buildsym_compunit): New function.
2018-07-20Introduce buildsym-legacy.hTom Tromey1-0/+377
This introduces a new header, buildsym-legacy.h, and changes all the symbol readers to use it. The idea is to put the function-based interface, that relies on the buildsym_compunit global, into a separate header. Then when a symbol reader is updated to use the new interface, it can simply not include buildsym-legacy.h, so it's easy to be sure that the new API is used everywhere. gdb/ChangeLog 2018-07-20 Tom Tromey <tom@tromey.com> * xcoffread.c: Include buildsym-legacy.h. * windows-nat.c: Include buildsym-legacy.h. * stabsread.c: Include buildsym-legacy.h. * mdebugread.c: Include buildsym-legacy.h. * buildsym-legacy.h: New file. * buildsym-legacy.c: New file, from buildsym.c. * go32-nat.c: Include buildsym-legacy.h. * dwarf2read.c: Include buildsym-legacy.h. * dbxread.c: Include buildsym-legacy.h. * cp-namespace.c: Include buildsym-legacy.h. * coffread.c: Include buildsym-legacy.h. * buildsym.h: Move some contents to buildsym-legacy.h. * buildsym.c: Include buildsym-legacy.h. Move many functions to buildsym-legacy.c. * Makefile.in (HFILES_NO_SRCDIR): Add buildsym-legacy.h.
generated by cgit v1.1 at 2024-11-19 12:49:09 +0000