aboutsummaryrefslogtreecommitdiff
path: root/gdb/btrace.h
AgeCommit message (Collapse)AuthorFilesLines
2019-07-09Rename common to gdbsupportTom Tromey1-2/+2
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-01-25Normalize includes to use common/Tom Tromey1-1/+1
This changes all includes to use the form "common/filename.h" rather than just "filename.h". This was written by a script. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * xtensa-linux-nat.c: Fix common/ includes. * xml-support.h: Fix common/ includes. * xml-support.c: Fix common/ includes. * x86-linux-nat.c: Fix common/ includes. * windows-nat.c: Fix common/ includes. * varobj.h: Fix common/ includes. * varobj.c: Fix common/ includes. * value.c: Fix common/ includes. * valops.c: Fix common/ includes. * utils.c: Fix common/ includes. * unittests/xml-utils-selftests.c: Fix common/ includes. * unittests/utils-selftests.c: Fix common/ includes. * unittests/unpack-selftests.c: Fix common/ includes. * unittests/tracepoint-selftests.c: Fix common/ includes. * unittests/style-selftests.c: Fix common/ includes. * unittests/string_view-selftests.c: Fix common/ includes. * unittests/scoped_restore-selftests.c: Fix common/ includes. * unittests/scoped_mmap-selftests.c: Fix common/ includes. * unittests/scoped_fd-selftests.c: Fix common/ includes. * unittests/rsp-low-selftests.c: Fix common/ includes. * unittests/parse-connection-spec-selftests.c: Fix common/ includes. * unittests/optional-selftests.c: Fix common/ includes. * unittests/offset-type-selftests.c: Fix common/ includes. * unittests/observable-selftests.c: Fix common/ includes. * unittests/mkdir-recursive-selftests.c: Fix common/ includes. * unittests/memrange-selftests.c: Fix common/ includes. * unittests/memory-map-selftests.c: Fix common/ includes. * unittests/lookup_name_info-selftests.c: Fix common/ includes. * unittests/function-view-selftests.c: Fix common/ includes. * unittests/environ-selftests.c: Fix common/ includes. * unittests/copy_bitwise-selftests.c: Fix common/ includes. * unittests/common-utils-selftests.c: Fix common/ includes. * unittests/cli-utils-selftests.c: Fix common/ includes. * unittests/array-view-selftests.c: Fix common/ includes. * ui-file.c: Fix common/ includes. * tui/tui-io.c: Fix common/ includes. * tracepoint.h: Fix common/ includes. * tracepoint.c: Fix common/ includes. * tracefile-tfile.c: Fix common/ includes. * top.h: Fix common/ includes. * top.c: Fix common/ includes. * thread.c: Fix common/ includes. * target/waitstatus.h: Fix common/ includes. * target/waitstatus.c: Fix common/ includes. * target.h: Fix common/ includes. * target.c: Fix common/ includes. * target-memory.c: Fix common/ includes. * target-descriptions.c: Fix common/ includes. * symtab.h: Fix common/ includes. * symfile.c: Fix common/ includes. * stap-probe.c: Fix common/ includes. * spu-linux-nat.c: Fix common/ includes. * sparc-nat.c: Fix common/ includes. * source.c: Fix common/ includes. * solib.c: Fix common/ includes. * solib-target.c: Fix common/ includes. * ser-unix.c: Fix common/ includes. * ser-tcp.c: Fix common/ includes. * ser-pipe.c: Fix common/ includes. * ser-base.c: Fix common/ includes. * selftest-arch.c: Fix common/ includes. * s12z-tdep.c: Fix common/ includes. * rust-exp.y: Fix common/ includes. * rs6000-aix-tdep.c: Fix common/ includes. * riscv-tdep.c: Fix common/ includes. * remote.c: Fix common/ includes. * remote-notif.h: Fix common/ includes. * remote-fileio.h: Fix common/ includes. * remote-fileio.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * record-btrace.c: Fix common/ includes. * python/python.c: Fix common/ includes. * python/py-type.c: Fix common/ includes. * python/py-inferior.c: Fix common/ includes. * progspace.h: Fix common/ includes. * producer.c: Fix common/ includes. * procfs.c: Fix common/ includes. * proc-api.c: Fix common/ includes. * printcmd.c: Fix common/ includes. * ppc-linux-nat.c: Fix common/ includes. * parser-defs.h: Fix common/ includes. * osdata.c: Fix common/ includes. * obsd-nat.c: Fix common/ includes. * nat/x86-linux.c: Fix common/ includes. * nat/x86-linux-dregs.c: Fix common/ includes. * nat/x86-dregs.h: Fix common/ includes. * nat/x86-dregs.c: Fix common/ includes. * nat/ppc-linux.c: Fix common/ includes. * nat/mips-linux-watch.h: Fix common/ includes. * nat/mips-linux-watch.c: Fix common/ includes. * nat/linux-waitpid.c: Fix common/ includes. * nat/linux-ptrace.h: Fix common/ includes. * nat/linux-ptrace.c: Fix common/ includes. * nat/linux-procfs.c: Fix common/ includes. * nat/linux-personality.c: Fix common/ includes. * nat/linux-osdata.c: Fix common/ includes. * nat/linux-namespaces.c: Fix common/ includes. * nat/linux-btrace.h: Fix common/ includes. * nat/linux-btrace.c: Fix common/ includes. * nat/fork-inferior.c: Fix common/ includes. * nat/amd64-linux-siginfo.c: Fix common/ includes. * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. * nat/aarch64-linux.c: Fix common/ includes. * nat/aarch64-linux-hw-point.h: Fix common/ includes. * nat/aarch64-linux-hw-point.c: Fix common/ includes. * namespace.h: Fix common/ includes. * mips-linux-tdep.c: Fix common/ includes. * minsyms.c: Fix common/ includes. * mi/mi-parse.h: Fix common/ includes. * mi/mi-main.c: Fix common/ includes. * mi/mi-cmd-env.c: Fix common/ includes. * memrange.h: Fix common/ includes. * memattr.c: Fix common/ includes. * maint.h: Fix common/ includes. * maint.c: Fix common/ includes. * main.c: Fix common/ includes. * machoread.c: Fix common/ includes. * location.c: Fix common/ includes. * linux-thread-db.c: Fix common/ includes. * linux-nat.c: Fix common/ includes. * linux-fork.c: Fix common/ includes. * inline-frame.c: Fix common/ includes. * infrun.c: Fix common/ includes. * inflow.c: Fix common/ includes. * inferior.h: Fix common/ includes. * inferior.c: Fix common/ includes. * infcmd.c: Fix common/ includes. * inf-ptrace.c: Fix common/ includes. * inf-child.c: Fix common/ includes. * ia64-linux-nat.c: Fix common/ includes. * i387-tdep.c: Fix common/ includes. * i386-tdep.c: Fix common/ includes. * i386-linux-tdep.c: Fix common/ includes. * i386-linux-nat.c: Fix common/ includes. * i386-go32-tdep.c: Fix common/ includes. * i386-fbsd-tdep.c: Fix common/ includes. * i386-fbsd-nat.c: Fix common/ includes. * guile/scm-type.c: Fix common/ includes. * guile/guile.c: Fix common/ includes. * go32-nat.c: Fix common/ includes. * gnu-nat.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbarch-selftests.c: Fix common/ includes. * gdb_usleep.c: Fix common/ includes. * gdb_select.h: Fix common/ includes. * gdb_bfd.c: Fix common/ includes. * gcore.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * findvar.c: Fix common/ includes. * fbsd-nat.c: Fix common/ includes. * event-top.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * dwarf2read.c: Fix common/ includes. * dwarf2loc.c: Fix common/ includes. * dwarf2-frame.c: Fix common/ includes. * dwarf-index-cache.c: Fix common/ includes. * dtrace-probe.c: Fix common/ includes. * disasm-selftests.c: Fix common/ includes. * defs.h: Fix common/ includes. * csky-tdep.c: Fix common/ includes. * cp-valprint.c: Fix common/ includes. * cp-support.h: Fix common/ includes. * cp-support.c: Fix common/ includes. * corelow.c: Fix common/ includes. * completer.h: Fix common/ includes. * completer.c: Fix common/ includes. * compile/compile.c: Fix common/ includes. * compile/compile-loc2c.c: Fix common/ includes. * compile/compile-cplus-types.c: Fix common/ includes. * compile/compile-cplus-symbols.c: Fix common/ includes. * command.h: Fix common/ includes. * cli/cli-dump.c: Fix common/ includes. * cli/cli-cmds.c: Fix common/ includes. * charset.c: Fix common/ includes. * build-id.c: Fix common/ includes. * btrace.h: Fix common/ includes. * btrace.c: Fix common/ includes. * breakpoint.h: Fix common/ includes. * breakpoint.c: Fix common/ includes. * ax.h: (enum agent_op): Fix common/ includes. * ax-general.c (struct aop_map): Fix common/ includes. * ax-gdb.c: Fix common/ includes. * auxv.c: Fix common/ includes. * auto-load.c: Fix common/ includes. * arm-tdep.c: Fix common/ includes. * arch/riscv.c: Fix common/ includes. * arch/ppc-linux-common.c: Fix common/ includes. * arch/i386.c: Fix common/ includes. * arch/arm.c: Fix common/ includes. * arch/arm-linux.c: Fix common/ includes. * arch/arm-get-next-pcs.c: Fix common/ includes. * arch/amd64.c: Fix common/ includes. * arch/aarch64.c: Fix common/ includes. * arch/aarch64-insn.c: Fix common/ includes. * arch-utils.c: Fix common/ includes. * amd64-windows-tdep.c: Fix common/ includes. * amd64-tdep.c: Fix common/ includes. * amd64-sol2-tdep.c: Fix common/ includes. * amd64-obsd-tdep.c: Fix common/ includes. * amd64-nbsd-tdep.c: Fix common/ includes. * amd64-linux-tdep.c: Fix common/ includes. * amd64-linux-nat.c: Fix common/ includes. * amd64-fbsd-tdep.c: Fix common/ includes. * amd64-fbsd-nat.c: Fix common/ includes. * amd64-dicos-tdep.c: Fix common/ includes. * amd64-darwin-tdep.c: Fix common/ includes. * agent.c: Fix common/ includes. * ada-lang.h: Fix common/ includes. * ada-lang.c: Fix common/ includes. * aarch64-tdep.c: Fix common/ includes. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * win32-low.c: Fix common/ includes. * win32-i386-low.c: Fix common/ includes. * tracepoint.c: Fix common/ includes. * thread-db.c: Fix common/ includes. * target.h: Fix common/ includes. * symbol.c: Fix common/ includes. * spu-low.c: Fix common/ includes. * server.h: Fix common/ includes. * server.c: Fix common/ includes. * remote-utils.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * nto-x86-low.c: Fix common/ includes. * notif.h: Fix common/ includes. * mem-break.h: Fix common/ includes. * lynx-low.c: Fix common/ includes. * lynx-i386-low.c: Fix common/ includes. * linux-x86-tdesc-selftest.c: Fix common/ includes. * linux-x86-low.c: Fix common/ includes. * linux-low.c: Fix common/ includes. * inferiors.h: Fix common/ includes. * i387-fp.c: Fix common/ includes. * hostio.c: Fix common/ includes. * hostio-errno.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbreplay.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * ax.c: (enum gdb_agent_op): Fix common/ includes.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-10-03Use unsigned as base type for some enumsTom Tromey1-1/+1
-fsanitize=undefined complains about using operator~ on various enum types that are used with DEF_ENUM_FLAGS_TYPE. This patch fixes these problems by explicitly setting the base type for these enums to unsigned. It also adds a static assert to enum_flags to ensure that future enums used this way have an unsigned underlying type. gdb/ChangeLog 2018-10-03 Tom Tromey <tom@tromey.com> * common/enum-flags.h (enum_flags::operator~): Add static assert. * symfile-add-flags.h (enum symfile_add_flag): Use unsigned as base type. * objfile-flags.h (enum objfile_flag): Use unsigned as base type. * gdbtypes.h (enum type_instance_flag_value): Use unsigned as base type. * c-lang.h (enum c_string_type_values): Use unsigned as base type. * btrace.h (enum btrace_thread_flag): Use unsigned as base type.
2018-06-08Remove cleanups from btrace codeTom Tromey1-3/+0
This removes some cleanups from the btrace code by minorly C++-ifying struct btrace_data. gdb/ChangeLog 2018-06-08 Tom Tromey <tom@tromey.com> * common/btrace-common.h (struct btrace_data): Add constructor, destructor, move assignment operator. <empty, clear, fini>: New methods. <format>: Initialize. (btrace_data_init, btrace_data_fini, btrace_data_clear) (btrace_data_empty): Don't declare. * common/btrace-common.c (btrace_data_init): Remove. (btrace_data::fini): Rename from btrace_data_fini. (btrace_data::empty): Rename from btrace_data_empty. (btrace_data::clear): Rename from btrace_data_clear. Return bool. * btrace.h (make_cleanup_btrace_data): Don't declare. * btrace.c (btrace_add_pc, btrace_stitch_trace, btrace_clear) (parse_xml_btrace): Update. (do_btrace_data_cleanup, make_cleanup_btrace_data): Remove. (maint_btrace_clear_packet_history_cmd): Update. gdb/gdbserver/ChangeLog 2018-06-08 Tom Tromey <tom@tromey.com> * linux-low.c (linux_low_read_btrace): Update.
2018-04-13btrace: set/show record btrace cpuMarkus Metzger1-2/+4
Add new set/show commands to set the processor that is used for enabling errata workarounds when decoding branch trace. The general format is "<vendor>:<identifier>" but we also allow two special values "auto" and "none". The default is "auto", which is the current behaviour of having GDB determine the processor on which the trace was recorded. If that cpu is not known to the trace decoder, e.g. when using an old decoder on a new system, decode may fail with "unknown cpu". In most cases it should suffice to 'downgrade' decode to assume an older cpu. Unfortunately, we can't do this automatically. The other special value, "none", disables errata workarounds. gdb/ * NEWS (New options): announce set/show record btrace cpu. * btrace.c: Include record-btrace.h. (btrace_compute_ftrace_pt): Skip enabling errata workarounds if the vendor is unknown. (btrace_compute_ftrace_1): Add cpu parameter. Update callers. Maybe overwrite the btrace configuration's cpu. (btrace_compute_ftrace): Add cpu parameter. Update callers. (btrace_fetch): Add cpu parameter. Update callers. (btrace_maint_update_pt_packets): Call record_btrace_get_cpu. Maybe overwrite the btrace configuration's cpu. Skip enabling errata workarounds if the vendor is unknown. * python/py-record-btrace.c: Include record-btrace.h. (recpy_bt_begin, recpy_bt_end, recpy_bt_instruction_history) (recpy_bt_function_call_history): Call record_btrace_get_cpu. * record-btrace.c (record_btrace_cpu_state_kind): New. (record_btrace_cpu): New. (set_record_btrace_cpu_cmdlist): New. (record_btrace_get_cpu): New. (require_btrace_thread, record_btrace_info) (record_btrace_resume_thread): Call record_btrace_get_cpu. (cmd_set_record_btrace_cpu_none): New. (cmd_set_record_btrace_cpu_auto): New. (cmd_set_record_btrace_cpu): New. (cmd_show_record_btrace_cpu): New. (_initialize_record_btrace): Initialize set/show record btrace cpu commands. * record-btrace.h (record_btrace_get_cpu): New. testsuite/ * gdb.btrace/cpu.exp: New. doc/ * gdb.texinfo: Document set/show record btrace cpu.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-09-04btrace: Store btrace_insn in an std::vectorSimon Marchi1-5/+1
Because it contains a non-POD type field (flags), the type btrace_insn should be new'ed/delete'd. Replace the VEC (btrace_insn_s) in btrace_function with an std::vector. gdb/ChangeLog: * btrace.h (btrace_insn_s, DEF_VEC_O (btrace_insn_s)): Remove. (btrace_function) <insn>: Change type to use std::vector. * btrace.c (ftrace_debug, ftrace_call_num_insn, ftrace_find_call, ftrace_new_gap, ftrace_update_function, ftrace_update_insns, ftrace_compute_global_level_offset, btrace_stitch_bts, btrace_clear, btrace_insn_get, btrace_insn_end, btrace_insn_next, btrace_insn_prev): Adjust to change to std::vector. (ftrace_update_insns): Adjust to change to std::vector, change type of INSN parameter. (btrace_compute_ftrace_bts): Adjust call to ftrace_update_insns. * record-btrace.c (btrace_call_history_insn_range, btrace_compute_src_line_range, record_btrace_frame_prev_register): Adjust to change to std::vector. * python/py-record-btrace.c (recpy_bt_func_instructions): Adjust to change to std::vector.
2017-05-30btrace: Store function segments as objects.Tim Wiederhake1-8/+15
2017-05-30btrace: Replace struct btrace_function::segment.Tim Wiederhake1-11/+6
This used to hold a pair of pointers to the previous and next function segment that belong to this function call. Replace with a pair of indices into the vector of function segments.
2017-05-30btrace: Remove struct btrace_function::flow.Tim Wiederhake1-3/+0
This used to hold a pair of pointers to the previous and next function segment in execution flow order. It is no longer necessary as the previous and next function segments now are simply the previous and next elements in the vector of function segments.
2017-05-30btrace: Replace struct btrace_function::up.Tim Wiederhake1-2/+4
This used to hold a function segment pointer. Change it to hold an index into the vector of function segments instead.
2017-05-30btrace: Remove struct btrace_thread_info::{begin,end}.Tim Wiederhake1-11/+3
These are no longer needed and might hold invalid addresses once we change the vector of function segment pointers into a vector of function segment objects where a reallocation of the vector changes the address of its elements.
2017-05-30btrace: Use function segment index in insn iterator.Tim Wiederhake1-4/+3
Remove FUNCTION pointer in struct btrace_insn_iterator and use an index into the list of function segments instead.
2017-05-30btrace: Use function segment index in call iterator.Tim Wiederhake1-4/+3
Remove FUNCTION pointer in struct btrace_call_iterator and use an index into the list of function segments instead.
2017-05-30btrace: Add btinfo to instruction interator.Tim Wiederhake1-0/+3
This will serve as the access path to the vector of function segments once the FUNCTION pointer in struct btrace_insn_iterator is removed.
2017-05-30btrace: Use std::vector in struct btrace_thread_information.Tim Wiederhake1-4/+3
2017-02-14btrace: Use binary search to find instruction.Tim Wiederhake1-0/+7
Currently, btrace_find_insn_by_number will iterate over all function call segments to find the one that contains the needed instruction. This linear search is too slow for the upcoming Python bindings that will use this function to access instructions. This patch introduces a vector in struct btrace_thread_info that holds pointers to all recorded function segments and allows to use binary search. The proper solution is to turn the underlying tree into a vector of objects and use indices for access. This requires more work. A patch set is currently being worked on and will be published later. Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com> gdb/ChangeLog: * btrace.c (btrace_fetch): Copy function call segments pointer into a vector. (btrace_clear): Clear the vector. (btrace_find_insn_by_number): Use binary search to find the correct function call segment. * btrace.h (brace_fun_p): New typedef. (struct btrace_thread_info) <functions>: New field. Change-Id: I8a7f67e80bfe4ff62c4192f74a2153a70bf2a035
2017-02-14btrace: Export btrace_decode_error function.Tim Wiederhake1-0/+5
Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com> gdb/ChangeLog: * record-btrace.c (btrace_ui_out_decode_error): Move most of it ... * btrace.c (btrace_decode_error): ... here. New function. * btrace.h (btrace_decode_error): New export. Change-Id: I2b4b43a55dbfd9f526a540d2ad52a6708f31feba
2017-02-14btrace: Count gaps as one instruction explicitly.Tim Wiederhake1-3/+6
This gives all instructions, including gaps, a unique number. Add a function to retrieve the error code if a btrace instruction iterator points to an invalid instruction. Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com> gdb/ChangeLog: * btrace.c (ftrace_call_num_insn, btrace_insn_get_error): New function. (ftrace_new_function, btrace_insn_number, btrace_insn_cmp, btrace_find_insn_by_number): Remove special case for gaps. * btrace.h (btrace_insn_get_error): New export. (btrace_insn_number, btrace_find_insn_by_number): Adjust comment. * record-btrace.c (btrace_insn_history): Print number for gaps. (record_btrace_info, record_btrace_goto): Handle gaps. Change-Id: I8eb0e48a95f4278522fea74ea13526bfe6898ecc
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-01-12Remove trademark acknowledgements throughoutPedro Alves1-1/+1
The GNU Coding Standards say: "Please do not include any trademark acknowledgements in GNU software packages or documentation." gdb/ChangeLog: 2016-01-12 Pedro Alves <palves@redhat.com> Remove use of the registered trademark symbol throughout. gdb/gdbserver/ChangeLog: 2016-01-12 Pedro Alves <palves@redhat.com> Remove use of the registered trademark symbol throughout. gdb/doc/ChangeLog: 2016-01-12 Pedro Alves <palves@redhat.com> Remove use of the registered trademark symbol throughout.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-11-17Type-safe wrapper for enum flagsPedro Alves1-3/+7
This patch fixes C++ build errors like this: /home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive] | COREFILTER_HUGETLB_PRIVATE); ^ This is a case of enums used as bit flags. Unlike "regular" enums, these values are supposed to be or'ed together. However, in C++, the type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to an enum variable without a cast. That means that this: enum foo_flags flags = 0; if (...) flags |= FOO_FLAG1; if (...) flags |= FOO_FLAG2; ... would have to be written as: enum foo_flags flags = (enum foo_flags) 0; if (...) flags = (enum foo_flags) (flags | FOO_FLAG1); if (...) flags = (enum foo_flags) (flags | FOO_FLAG2); which is ... ugly. Alternatively, we'd have to use an int for the variable's type, which isn't ideal either. This patch instead adds an "enum flags" class. "enum flags" are exactly the enums where the values are bits that are meant to be ORed together. This allows writing code like the below, while with raw enums this would fail to compile without casts to enum type at the assignments to 'f': enum some_flag { flag_val1 = 1 << 1, flag_val2 = 1 << 2, flag_val3 = 1 << 3, flag_val4 = 1 << 4, }; DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags) some_flags f = flag_val1 | flag_val2; f |= flag_val3; It's also possible to assign literal zero to an enum flags variable (meaning, no flags), dispensing either adding an awkward explicit "no value" value to the enumeration or the cast to assignments from 0. For example: some_flags f = 0; f |= flag_val3 | flag_val4; Note that literal integers other than zero do fail to compile: some_flags f = 1; // error C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that case. gdb/ChangeLog: 2015-11-17 Pedro Alves <palves@redhat.com> * btrace.h: Include common/enum-flags.h. (btrace_insn_flags): Define. (struct btrace_insn) <flags>: Change type. (btrace_function_flags): Define. (struct btrace_function) <flags>: Change type. (btrace_thread_flags): Define. (struct btrace_thread_info) <flags>: Change type. * c-exp.y (token_flags): Rename to ... (token_flag): ... this. (token_flags): Define. (struct token) <flags>: Change type. * common/enum-flags.h: New file. * compile/compile-c-types.c (convert_qualified): Change type of 'quals' local. * compile/compile-internal.h: Include "common/enum-flags.h". (gcc_qualifiers_flags): Define. * completer.c (enum reg_completer_targets): Rename to ... (enum reg_completer_target): ... this. (reg_completer_targets): Define. (reg_or_group_completer_1): Change type of 'targets' parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Change type of 'psl_flags' local. (do_mixed_source_and_assembly): Change type of 'psl_flags' local. * infrun.c: Include "common/enum-flags.h". (enum step_over_what): Rename to ... (enum step_over_what_flag): ... this. (step_over_what): Change type. (start_step_over): Change type of 'step_what' local. (thread_still_needs_step_over): Now returns a step_over_what. Adjust. (keep_going_pass_signal): Change type of 'step_what' local. * linux-tdep.c: Include "common/enum-flags.h". (enum filterflags): Rename to ... (enum filter_flag): ... this. (filter_flags): Define. (dump_mapping_p): Change type of 'filterflags' parameter. (linux_find_memory_regions_full): Change type of 'filterflags' local. (linux_find_memory_regions_full): Pass the address of an unsigned int to sscanf instead of the address of an enum. * record-btrace.c (btrace_print_lines): Change type of local 'psl_flags'. (btrace_call_history): Replace 'flags' parameter with 'int_flags' parameter. Adjust. (record_btrace_call_history, record_btrace_call_history_range) (record_btrace_call_history_from): Rename 'flags' parameter to 'int_flags'. Use record_print_flags. * record.h: Include "common/enum-flags.h". (record_print_flags): Define. * source.c: Include "common/enum-flags.h". (print_source_lines_base, print_source_lines): Change type of flags parameter. * symtab.h: Include "common/enum-flags.h". (enum print_source_lines_flags): Rename to ... (enum print_source_lines_flag): ... this. (print_source_lines_flags): Define. (print_source_lines): Change prototype.
2015-09-18btrace: support to_stopMarkus Metzger1-1/+4
Add support for the to_stop target method to the btrace record target. gdb/ * btrace.h (enum btrace_thread_flag) <BTHR_STOP>: New. * record-btrace (record_btrace_resume_thread): Clear BTHR_STOP. (record_btrace_find_thread_to_move): Also accept threads that have BTHR_STOP set. (btrace_step_stopped_on_request, record_btrace_stop): New. (record_btrace_step_thread): Support BTHR_STOP. (record_btrace_wait): Also clear BTHR_STOP when stopping other threads. (init_record_btrace_ops): Initialize to_stop.
2015-08-07btrace: indicate speculative executionMarkus Metzger1-0/+10
Indicate speculatively executed instructions with a leading '?'. We use the space that is normally used for the PC prefix. In the case where the instruction at the current PC had been executed speculatively before, the PC prefix will be partially overwritten resulting in "?> ". As a side-effect, the /p modifier to omit the PC prefix in the "record instruction-history" command now uses a 3-space PC prefix " " in order to have enough space for the speculative execution indication. gdb/ * btrace.c (btrace_compute_ftrace_bts): Clear insn flags. (pt_btrace_insn_flags): New. (ftrace_add_pt): Call pt_btrace_insn_flags. * btrace.h (btrace_insn_flag): New. (btrace_insn) <flags>: New. * record-btrace.c (btrace_insn_history): Print insn prefix. * NEWS: Announce it. doc/ * gdb.texinfo (Process Record and Replay): Document prefixing of speculatively executed instructions in the "record instruction-history" command. testsuite/ * gdb.btrace/instruction_history.exp: Update. * gdb.btrace/tsx.exp: New. * gdb.btrace/tsx.c: New. * lib/gdb.exp (skip_tsx_tests, skip_btrace_pt_tests): New.
2015-07-02btrace: maintenance commandsMarkus Metzger1-0/+63
Add maintenance commands that help debugging the btrace record target. The following new commands are added: maint info btrace Print information about branch tracing internals. maint btrace packet-history Print the raw branch tracing data. maint btrace clear-packet-history Discard the stored raw branch tracing data. maint btrace clear Discard all branch tracing data. It will be fetched and processed anew by the next "record" command. maint set|show btrace pt skip-pad Set and show whether PAD packets are skipped when computing the packet history. gdb/ * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h. (maint_btrace_cmdlist, maint_btrace_set_cmdlist) (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist) (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad) (btrace_maint_clear): New. (btrace_fetch, btrace_clear): Call btrace_maint_clear. (pt_print_packet, btrace_maint_decode_pt) (btrace_maint_update_pt_packets, btrace_maint_update_packets) (btrace_maint_print_packets, get_uint, get_context_size, no_chunk) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd) (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd) (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd) (maint_info_btrace_cmd, _initialize_btrace): New. * btrace.h (btrace_pt_packet, btrace_pt_packet_s) (btrace_maint_packet_history, btrace_maint_info): New. (btrace_thread_info) <maint>: New. * NEWS: Announce it. doc/ * gdb.texinfo (Maintenance Commands): Document "maint btrace" commands.
2015-07-02btrace: store raw btrace dataMarkus Metzger1-0/+3
Store the raw branch trace data that has been read from the target. This data can be used for maintenance commands as well as for generating a core file for the "record save" command. gdb/ * btrace.c (btrace_fetch): Append the new trace data. (btrace_clear): Clear the stored trace data. * btrace.h (btrace_thread_info) <data>: New. * common/btrace-common.h (btrace_data_clear) (btrace_data_append): New. * common/btrace-common.c (btrace_data_clear) (btrace_data_append): New.
2015-07-02btrace: support Intel(R) Processor TraceMarkus Metzger1-0/+19
Adds a new command "record btrace pt" to configure the kernel to use Intel(R) Processor Trace instead of Branch Trace Strore. The "record btrace" command chooses the tracing format automatically. Intel(R) Processor Trace support requires Linux 4.1 and libipt. gdb/ * NEWS: Announce new commands "record btrace pt" and "record pt". Announce new options "set|show record btrace pt buffer-size". * btrace.c: Include "rsp-low.h". Include "inttypes.h". (btrace_add_pc): Add forward declaration. (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback) (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt) (btrace_compute_ftrace_pt): New. (btrace_compute_ftrace): Support BTRACE_FORMAT_PT. (check_xml_btrace_version): Update version check. (parse_xml_raw, parse_xml_btrace_pt_config_cpu) (parse_xml_btrace_pt_raw, parse_xml_btrace_pt) (btrace_pt_config_cpu_attributes, btrace_pt_config_children) (btrace_pt_children): New. (btrace_children): Add support for "pt". (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New. (btrace_conf_children): Add support for "pt". * btrace.h: Include "intel-pt.h". (btrace_pt_error): New. * common/btrace-common.c (btrace_format_string, btrace_data_fini) (btrace_data_empty): Support BTRACE_FORMAT_PT. * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT. (struct btrace_config_pt): New. (struct btrace_config)<pt>: New. (struct btrace_data_pt_config, struct btrace_data_pt): New. (struct btrace_data)<pt>: New. * features/btrace-conf.dtd (btrace-conf)<pt>: New. (pt): New. * features/btrace.dtd (btrace)<pt>: New. (pt, pt-config, cpu): New. * nat/linux-btrace.c (perf_event_read, perf_event_read_all) (perf_event_pt_event_type, kernel_supports_pt) (linux_supports_pt): New. (linux_supports_btrace): Support BTRACE_FORMAT_PT. (linux_enable_bts): Free tinfo on error. (linux_enable_pt): New. (linux_enable_btrace): Support BTRACE_FORMAT_PT. (linux_disable_pt): New. (linux_disable_btrace): Support BTRACE_FORMAT_PT. (linux_fill_btrace_pt_config, linux_read_pt): New. (linux_read_btrace): Support BTRACE_FORMAT_PT. * nat/linux-btrace.h (struct btrace_tinfo_pt): New. (struct btrace_target_info)<pt>: New. * record-btrace.c (set_record_btrace_pt_cmdlist) (show_record_btrace_pt_cmdlist): New. (record_btrace_print_pt_conf): New. (record_btrace_print_conf): Support BTRACE_FORMAT_PT. (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT. (cmd_record_btrace_pt_start): New. (cmd_record_btrace_start): Support BTRACE_FORMAT_PT. (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New. (_initialize_record_btrace): Add new commands. * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New. (remote_protocol_features): Add "Qbtrace:pt". Add "Qbtrace-conf:pt:size". (remote_supports_btrace): Support BTRACE_FORMAT_PT. (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size. (remote_enable_btrace): Support BTRACE_FORMAT_PT. (_initialize_remote): Add new commands. gdbserver/ * linux-low.c: Include "rsp-low.h" (linux_low_encode_pt_config, linux_low_encode_raw): New. (linux_low_read_btrace): Support BTRACE_FORMAT_PT. (linux_low_btrace_conf): Support BTRACE_FORMAT_PT. (handle_btrace_enable_pt): New. (handle_btrace_general_set): Support "pt". (handle_btrace_conf_general_set): Support "pt:size". doc/ * gdb.texinfo (Process Record and Replay): Spell out that variables and registers are not available during btrace replay. Describe the new "record btrace pt" command. Describe the new "set|show record btrace pt buffer-size" options. (General Query Packets): Describe the new Qbtrace:pt and Qbtrace-conf:pt:size packets. Expand "bts" to "Branch Trace Store". Update the branch trace DTD.
2015-03-04record-full/record-btrace: software/hardware breakpoint trapPedro Alves1-0/+4
This adjusts the record targets to tell the core whether a trap was caused by a breakpoint. Targets that can do this should report breakpoint traps with the PC already adjusted, so this removes the re-incrementing record-full was doing. These targets need to be adjusted before process_stratum targets beneath are, otherwise target_supports_stopped_by_sw_breakpoint, etc. would fall through to the target beneath while recording/replaying, and the core would get confused. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * btrace.h: Include target/waitstatus.h. (struct btrace_thread_info) <stop_reason>: New field. * record-btrace.c (record_btrace_step_thread): Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_btrace_decr_pc_after_break): Delete. (record_btrace_stopped_by_sw_breakpoint) (record_btrace_supports_stopped_by_sw_breakpoint) (record_btrace_stopped_by_hw_breakpoint) (record_btrace_supports_stopped_by_hw_breakpoint): New functions. (init_record_btrace_ops): Install them. * record-full.c (record_full_hw_watchpoint): Delete and replace with ... (record_full_stop_reason): ... this throughout. (record_full_exec_insn): Adjust. (record_full_wait_1): Adjust. No longer re-increment the PC. (record_full_wait_1): Adjust. Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_full_stopped_by_watchpoint): Adjust. (record_full_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_stopped_by_hw_breakpoint) (record_full_supports_stopped_by_hw_breakpoint): New functions. (init_record_full_ops, init_record_full_core_ops): Install them. * record.c (record_check_stopped_by_breakpoint): New function. * record.h: Include target/waitstatus.h. (record_check_stopped_by_breakpoint): New declaration.
2015-03-03btrace: compute line range when printingMarkus Metzger1-3/+0
The "record function-call-history" command prints the range of source lines for a function segment when given the /l modifier. This information is computed for the entire execution history when processing the recorded branch trace. To speed up the initial trace processing, we compute the information when we print a function segment and only if requested. The computation is fast enough (due to the limited scope) that it is not worth storing the data in struct btrace_function, anymore. gdb/ * btrace.h (btrace_function) <lbegin, lend>: Remove. * btrace.c (ftrace_debug): Do not print the line range. (ftrace_skip_file, ftrace_update_lines): Remove. (ftrace_new_function): Remove lbegin and lend initialization. (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines. * record-btrace.c (btrace_compute_src_line_range): New. (btrace_call_history_src_line): Call btrace_compute_src_line_range.
2015-02-09record-btrace: indicate gapsMarkus Metzger1-6/+34
Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2015-02-09btrace: extend struct btrace_insnMarkus Metzger1-0/+22
Add the instruction's size as well as a coarse classification to struct btrace_insn. Use the information in ftrace_update_function and ftrace_find_call. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (btrace_insn_class): New. (btrace_insn) <size, iclass>: New. * btrace.c (ftrace_find_call): Update parameters. Update users. Use instruction classification. (ftrace_new_return): Update parameters. Update users. (ftrace_update_function): Update parameters. Update users. Use instruction classification. (ftrace_update_insns): Update parameters. Update users. (ftrace_classify_insn): New. (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add TRY_CATCH around call to gdb_insn_length.
2015-02-09record btrace: add configuration structMarkus Metzger1-1/+10
Add a struct to describe the branch trace configuration and use it for enabling branch tracing. The user will be able to set configuration fields for each tracing format to be used for new threads. The actual configuration that is active for a given thread will be shown in the "info record" command. At the moment, the configuration struct only contains a format field that is set to the only available format. The format is the only configuration option that can not be set via set commands. It is given as argument to the "record btrace" command when starting recording. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (XMLFILES): Add btrace-conf.dtd. * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. (x86_linux_btrace_conf): New. (x86_linux_create_target): Initialize to_btrace_conf. * nat/linux-btrace.c (linux_enable_btrace): Update parameters. Check format. Split into this and ... (linux_enable_bts): ... this. (linux_btrace_conf): New. (perf_event_skip_record): Renamed into ... (perf_event_skip_bts_record): ... this. Updated users. (linux_disable_btrace): Split into this and ... (linux_disable_bts): ... this. (linux_read_btrace): Check format. * nat/linux-btrace.h (linux_enable_btrace): Update parameters. (linux_btrace_conf): New. (btrace_target_info)<ptid>: Moved. (btrace_target_info)<conf>: New. (btrace_target_info): Split into this and ... (btrace_tinfo_bts): ... this. Updated users. * btrace.c (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) (btrace_conf_children, btrace_conf_attributes) (btrace_conf_elements): New. * btrace.h (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf): New. * common/btrace-common.h (btrace_config): New. * feature/btrace-conf.dtd: New. * record-btrace.c (record_btrace_conf): New. (record_btrace_cmdlist): New. (record_btrace_enable_warn, record_btrace_open): Pass &record_btrace_conf. (record_btrace_info): Print recording format. (cmd_record_btrace_bts_start): New. (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. (_initialize_record_btrace): Add "record btrace bts" subcommand. Add "record bts" alias command. * remote.c (remote_state)<btrace_config>: New. (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. (remote_protocol_features): Add qXfer:btrace-conf:read. (remote_open_1): Call remote_btrace_reset. (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. (btrace_target_info)<conf>: New. (btrace_sync_conf, btrace_read_config): New. (remote_enable_btrace): Update parameters. Call btrace_sync_conf and btrace_read_conf. (remote_btrace_conf): New. (init_remote_ops): Initialize to_btrace_conf. (_initialize_remote): Add qXfer:btrace-conf packet. * target.c (target_enable_btrace): Update parameters. (target_btrace_conf): New. * target.h (target_enable_btrace): Update parameters. (target_btrace_conf): New. (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. (target_ops)<to_enable_btrace>: Update parameters and comment. (target_ops)<to_btrace_conf>: New. * target-delegates: Regenerate. * target-debug.h (target_debug_print_const_struct_btrace_config_p) (target_debug_print_const_struct_btrace_target_info_p): New. NEWS: Announce new command and new packet. doc/ * gdb.texinfo (Process Record and Replay): Describe the "record btrace bts" command. (General Query Packets): Describe qXfer:btrace-conf:read packet. (Branch Trace Configuration Format): New. gdbserver/ * linux-low.c (linux_low_enable_btrace): Update parameters. (linux_low_btrace_conf): New. (linux_target_ops)<to_btrace_conf>: Initialize. * server.c (current_btrace_conf): New. (handle_btrace_enable): Rename to ... (handle_btrace_enable_bts): ... this. Pass &current_btrace_conf to target_enable_btrace. Update comment. Update users. (handle_qxfer_btrace_conf): New. (qxfer_packets): Add btrace-conf entry. (handle_query): Report qXfer:btrace-conf:read as supported packet. * target.h (target_ops)<enable_btrace>: Update parameters and comment. (target_ops)<read_btrace_conf>: New. (target_enable_btrace): Update parameters. (target_read_btrace_conf): New. testsuite/ * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2015-02-09btrace: add struct btrace_dataMarkus Metzger1-2/+4
Add a structure to hold the branch trace data and an enum to describe the format of that data. So far, only BTS is supported. Also added a NONE format to indicate that no branch trace data is available. This will make it easier to support different branch trace formats in the future. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (SFILES): Add common/btrace-common.c. (COMMON_OBS): Add common/btrace-common.o. (btrace-common.o): Add build rules. * btrace.c (parse_xml_btrace): Update parameters. (parse_xml_btrace_block): Set format field. (btrace_add_pc, btrace_fetch): Use struct btrace_data. (do_btrace_data_cleanup, make_cleanup_btrace_data): New. (btrace_compute_ftrace): Split into this and... (btrace_compute_ftrace_bts): ...this. (btrace_stitch_trace): Split into this and... (btrace_stitch_bts): ...this. * btrace.h (parse_xml_btrace): Update parameters. (make_cleanup_btrace_data): New. * common/btrace-common.c: New. * common/btrace-common.h: Include common-defs.h. (btrace_block_s): Update comment. (btrace_format): New. (btrace_format_string): New. (btrace_data_bts): New. (btrace_data): New. (btrace_data_init, btrace_data_fini, btrace_data_empty): New. * remote.c (remote_read_btrace): Update parameters. * target.c (target_read_btrace): Update parameters. * target.h (target_read_btrace): Update parameters. (target_ops)<to_read_btrace>: Update parameters. * x86-linux-nat.c (x86_linux_read_btrace): Update parameters. * target-delegates.c: Regenerate. * target-debug (target_debug_print_struct_btrace_data_p): New. * nat/linux-btrace.c (linux_read_btrace): Split into this and... (linux_read_bts): ...this. * nat/linux-btrace.h (linux_read_btrace): Update parameters. gdbserver/ * Makefile.in (SFILES): Add common/btrace-common.c. (OBS): Add common/btrace-common.o. (btrace-common.o): Add build rules. * linux-low: Include btrace-common.h. (linux_low_read_btrace): Use struct btrace_data. Call btrace_data_init and btrace_data_fini.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-01-16record-btrace: add (reverse-)stepping supportMarkus Metzger1-0/+22
Provide to_resume and to_wait target methods for the btrace record target to allow reverse stepping and replay support. Replay is limited in the sense that only stepping and source correlation are supported. We do not record data and thus can not show variables. Non-stop mode is not working. Do not allow record-btrace in non-stop mode. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (btrace_thread_flag): New. (struct btrace_thread_info) <flags>: New. * record-btrace.c (record_btrace_resume_thread) (record_btrace_find_thread_to_move, btrace_step_no_history) (btrace_step_stopped, record_btrace_start_replaying) (record_btrace_step_thread, record_btrace_decr_pc_after_break) (record_btrace_find_resume_thread): New. (record_btrace_resume, record_btrace_wait): Extend. (record_btrace_can_execute_reverse): New. (record_btrace_open): Fail in non-stop mode. (record_btrace_set_replay): Split into this, ... (record_btrace_stop_replaying): ... this, ... (record_btrace_clear_histories): ... and this. (init_record_btrace_ops): Init to_can_execute_reverse. * NEWS: Announce it. testsuite/ * gdb.btrace/delta.exp: Check reverse stepi. * gdb.btrace/tailcall.exp: Update. Add stepping tests. * gdb.btrace/finish.exp: New. * gdb.btrace/next.exp: New. * gdb.btrace/nexti.exp: New. * gdb.btrace/record_goto.c: Add comments. * gdb.btrace/step.exp: New. * gdb.btrace/stepi.exp: New. * gdb.btrace/multi-thread-step.c: New. * gdb.btrace/multi-thread-step.exp: New. * gdb.btrace/rn-dl-bind.c: New. * gdb.btrace/rn-dl-bind.exp: New. * gdb.btrace/data.c: New. * gdb.btrace/data.exp: New. * gdb.btrace/Makefile.in (EXECUTABLES): Add new. doc/ * gdb.texinfo: Document limited reverse/replay support for target record-btrace.
2014-01-16record-btrace: show trace from enable locationMarkus Metzger1-0/+4
The btrace record target shows the branch trace from the location of the first branch destination. This is the first BTS records. After adding incremental updates, we can now add a dummy record for the current PC when we enable tracing so we show the trace from the location where branch tracing has been enabled. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.c: Include regcache.h. (btrace_add_pc): New. (btrace_enable): Call btrace_add_pc. (btrace_is_empty): New. * btrace.h (btrace_is_empty): New. * record-btrace.c (require_btrace, record_btrace_info): Call btrace_is_empty. testsuite/ * gdb.btrace/Makefile.in (EXECUTABLES): Add delta. * gdb.btrace/exception.exp: Update. * gdb.btrace/instruction_history.exp: Update. * gdb.btrace/record_goto.exp: Update. * gdb.btrace/tailcall.exp: Update. * gdb.btrace/unknown_functions.exp: Update. * gdb.btrace/delta.exp: New.
2014-01-16btrace: add replay position to btrace thread infoMarkus Metzger1-0/+6
Add a branch trace instruction iterator pointing to the current replay position to the branch trace thread info struct. Free the iterator when btrace is cleared. Start at the replay position for the instruction and function-call histories. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (replay) <replay>: New. (btrace_is_replaying): New. * btrace.c (btrace_clear): Free replay iterator. (btrace_is_replaying): New. * record-btrace.c (record_btrace_is_replaying): New. (record_btrace_info): Print insn number if replaying. (record_btrace_insn_history): Start at replay position. (record_btrace_call_history): Start at replay position. (init_record_btrace_ops): Init to_record_is_replaying.
2014-01-16btrace: change branch trace data structureMarkus Metzger1-34/+203
The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-03-11Define the xml document style for transferring branch trace data.Markus Metzger1-0/+3
Add a function to parse a btrace xml document into a vector of branch trace blocks. gdb/ * features/btrace.dtd: New file. * Makefile.in (XMLFILES): Add btrace.dtd. * btrace.h (parse_xml_btrace): New declaration. * btrace.c: Include xml-support.h. (parse_xml_btrace): New function. (parse_xml_btrace_block): New function. (block_attributes): New struct. (btrace_attributes): New struct. (btrace_children): New struct. (btrace_elements): New struct.
2013-03-11Add branch trace information to struct thread_info.Markus Metzger1-0/+139
Add functions to enable, disable, clear, and fetch a thread's branch trace. gdb/ * target.h: Include btrace.h. (struct target_ops) <to_supports_btrace, to_enable_btrace, to_disable_btrace, to_teardown_btrace, to_read_btrace>: New. * target.c (target_supports_btrace): New function. (target_enable_btrace): New function. (target_disable_btrace): New function. (target_teardown_btrace): New function. (target_read_btrace): New function. * btrace.h: New file. * btrace.c: New file. * Makefile.in: Add btrace.c. * gdbthread.h: Include btrace.h. (struct thread_info): Add btrace field. * thread.c: Include btrace.h. (clear_thread_inferior_resources): Call target_teardown_btrace. * common/btrace-common.h: New file.
generated by cgit v1.1 at 2024-11-22 00:28:08 +0000