| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After the previous patch, we end up with these two types with quite
similar, and potentially confusing names:
typedef gdb::unique_ptr<agent_expr> agent_expr_up;
/* Pointer to an agent_expr structure. */
typedef struct agent_expr *agent_expr_p;
The latter is only necessary to put agent_expr pointers in VECs. So
just eliminate it and use std::vector instead.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* ax.h (agent_expr_p): Delete.
(DEF_VEC_P (agent_expr_p)): Delete.
* breakpoint.c (build_target_condition_list)
(build_target_command_list): Adjust to use of std::vector.
(bp_location_dtor): Remove now unnecessary VEC_free calls.
* breakpoint.h: Include <vector>.
(struct bp_target_info) <conditions, tcommands>: Now
std::vector's.
* remote.c (remote_add_target_side_condition): bp_tgt->conditions
is now a std::vector; adjust.
(remote_add_target_side_commands, remote_insert_breakpoint):
bp_tgt->tcommands is now a std::vector; adjust.
|
|
This patch makes the gen_* functions return a unique_ptr instead of
raw pointer:
typedef gdb::unique_ptr<agent_expr> agent_expr_up;
and then adjusts the codebase throughout to stop using
make_cleanup_free_agent_expr.
The cond_bytecode and cmd_bytecode fields of struct bp_location are
owning pointers, so they're changed to be unique_ptr's instead of raw
pointers.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* ax-gdb.c (is_nontrivial_conversion): Use agent_expr_up.
(gen_trace_for_var, gen_trace_for_expr, gen_eval_for_expr)
(gen_trace_for_return_address, gen_printf): Use and return an
agent_expr_up. Don't use make_cleanup_free_agent_expr.
(agent_eval_command_one, maint_agent_printf_command): Use
agent_expr_up. Don't use make_cleanup_free_agent_expr.
* ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
(gen_trace_for_return_address, gen_eval_for_expr, gen_printf): Use
agent_expr_up.
* ax-general.c (new_agent_expr): Rename to ...
(agent_expr::agent_expr): ... this, and now a constructor.
(free_agent_expr): Rename to ...
(agent_expr::~agent_exp): ... this, and now a destructor.
(do_free_agent_expr_cleanup, make_cleanup_free_agent_expr):
Delete.
* ax.h (struct agent_expr): Add ctor/dtor.
(agent_expr_up): New typedef.
(new_agent_expr, free_agent_expr, make_cleanup_free_agent_expr):
Delete declarations.
* breakpoint.c (parse_cond_to_aexpr): Use and return an
agent_expr_up. Don't use make_cleanup_free_agent_expr.
(build_target_condition_list): Adjust to use agent_expr_up.
(parse_cmd_to_aexpr): Use and return an agent_expr_up. Don't use
make_cleanup_free_agent_expr.
(build_target_command_list): Adjust to use agent_expr_up.
(force_breakpoint_reinsertion): Adjust to use agent_expr_up.
(bp_location_dtor): Remove unnecessary free_agent_expr and xfree
calls.
* breakpoint.h (struct bp_target_info) <cond_bytecode,
cmd_bytecode>: Now agent_expr_up's.
* remote.c (remote_download_tracepoint): Adjust to use
agent_expr_up and remove use of make_cleanup_free_agent_expr.
* tracepoint.c (validate_actionline, collect_symbol): Adjust to
use agent_expr_up and remove uses of make_cleanup_free_agent_expr.
(collection_list::~collection_list): Call delete instead of
free_agent_expr.
(encode_actions_1): Adjust to use agent_expr_up and remove uses of
make_cleanup_free_agent_expr.
(add_aexpr): Change parameter type to agent_expr_up; Return a raw
agent_expr pointer.
|
|
This patch makes parse_expression and friends return a unique_ptr
instead of raw pointer [1]:
typedef gdb::unique_malloc_ptr<expression> expression_up;
and then adjusts the codebase throughout to stop using cleanups to
manage lifetime of expression pointers.
Whenever I found a structure owning an expression pointer, I made it
store a unique_ptr instead of a raw pointer, which then requires using
new/delete of the holding structure, instead of XNEW/xfree.
[1] - I'd like to set the rule that types named with an "_up" suffix
are unique_ptr typedefs.
Note I used gdb::unique_xmalloc_ptr instead of gdb::unique_ptr, simply
because we still use xmalloc instead of new to allocate expression
objects. Once that's changed, all we need to do is change the
expression_up typedef and the smart pointer will then call delete
instead of xfree.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_read_renaming_var_value): Use expression_up.
(struct ada_catchpoint_location) <excep_cond_expr>: Now an
expression_up.
(ada_catchpoint_location_dtor): Reset excep_cond_expr instead of
using xfree.
(create_excep_cond_exprs): Use expression_up and gdb::move.
(allocate_location_exception): Use new instead of XNEW.
(should_stop_exception): Likewise. Adjust to use expression_up.
(create_ada_exception_catchpoint): Use new instead of XNEW.
* ax-gdb.c (agent_eval_command_one): Use expression_up instead of
cleanups.
(maint_agent_printf_command): Use expression_up.
* break-catch-sig.c (create_signal_catchpoint): Use new instead of
XNEW.
* break-catch-syscall.c (create_syscall_event_catchpoint):
Likewise.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use new instead
of XCNEW. Use gdb::unique_ptr instead of cleanups.
* breakpoint.c (set_breakpoint_condition, update_watchpoint)
(parse_cmd_to_aexpr, watchpoint_check)
(bpstat_check_breakpoint_conditions, watchpoint_locations_match):
Adjust to use expression_up.
(init_bp_location): Adjust.
(free_bp_location): Use delete instead of xfree.
(set_raw_breakpoint_without_location, set_raw_breakpoint)
(add_solib_catchpoint, create_fork_vfork_event_catchpoint)
(new_single_step_breakpoint, create_breakpoint_sal): Use new
instead of XNEW.
(find_condition_and_thread): Adjust to use expression_up.
(create_breakpoint): Use new instead of XNEW.
(dtor_watchpoint): Don't xfree expression pointers, they're
unique_ptr's now.
(insert_watchpoint, remove_watchpoint): Adjust.
(watch_command_1): Use expression_up. Use new instead of XCNEW.
(catch_exec_command_1): Use new instead of XNEW.
(bp_location_dtor): Don't xfree expression pointers, they're
unique_ptr's now.
(base_breakpoint_allocate_location)
(strace_marker_create_breakpoints_sal): Use new instead of XNEW.
(delete_breakpoint): Use delete instead of xfree.
* breakpoint.h (struct bp_location) <cond>: Now an
unique_ptr<expression> instead of a raw pointer.
(struct watchpoint) <exp, cond_exp>: Likewise.
* cli/cli-script.c (execute_control_command): Use expression_up
instead of cleanups.
* dtrace-probe.c (dtrace_process_dof_probe): Use expression_up.
* eval.c (parse_and_eval_address, parse_and_eval_long)
(parse_and_eval, parse_to_comma_and_eval, parse_and_eval_type):
Use expression_up instead of cleanups.
* expression.h (expression_up): New typedef.
(parse_expression, parse_expression_with_language, parse_exp_1):
Change return type to expression_up.
* mi/mi-main.c (mi_cmd_data_evaluate_expression)
(print_variable_or_computed): Use expression_up.
* objc-lang.c (print_object_command): Use expression_up instead of
cleanups.
* parse.c (parse_exp_1, parse_exp_in_context)
(parse_exp_in_context_1, parse_expression)
(parse_expression_with_language): Return an expression_up instead
of a raw pointer.
(parse_expression_for_completion): Use expression_up.
* printcmd.c (struct display) <exp>: Now an expression_up instead
of a raw pointer.
(print_command_1, output_command_const, set_command, x_command):
Use expression_up instead of cleanups.
(display_command): Likewise. Use new instead of XNEW.
(free_display): Use delete instead of xfree.
(do_one_display): Adjust to use expression_up.
* remote.c (remote_download_tracepoint): Likewise.
* stack.c (return_command): Likewise.
* tracepoint.c (validate_actionline, encode_actions_1): Use
expression_up instead of cleanups.
* typeprint.c (whatis_exp, maintenance_print_type): Likewise.
* value.c (init_if_undefined_command): Likewise.
* varobj.c (struct varobj_root) <exp>: Now an expression_up
instead of a raw pointer.
(varobj_create): Adjust.
(varobj_set_value): Use an expression_up instead of cleanups.
(new_root_variable): Use new instead of XNEW.
(free_variable): Use delete instead of xfree.
(value_of_root_1): Use std::swap.
|
|
This is constification needed for next patch. Adjust
commands_command_1 to use std::string too because the "arg" parameter
is currently overwritten and then passed to make_cleanup. The
constification alone would trigger a compile error in the make_cleanup
call otherwise (passing const char * to void * parameter). Using
std::string gets rid of the cleanup in the first place, resulting in
simpler code.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* breakpoint.c (struct commands_info) <arg>: Constify.
(commands_command_1): Constify 'arg' parameter. Use std::string
and string_printf.
(commands_from_control_command): Constify 'arg' parameter.
(map_breakpoint_numbers): Constify 'args' parameter.
* breakpoint.h (commands_from_control_command): Constify 'arg'
parameter.
|
|
This patch changes gdbarch method software_single_step to return a
vector of addresses on which GDB should insert breakpoints, and don't
insert breakpoints. Instead, the caller of
gdbarch_software_single_step inserts breakpoints if the returned
vector is not NULL.
gdb:
2016-11-08 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Return
VEC (CORE_ADDR) *. Return NULL instead of 0. Don't call
insert_single_step_breakpoint.
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
(alpha_software_single_step): Likewise.
* alpha-tdep.h (alpha_software_single_step): Update declaration.
* arm-linux-tdep.c (arm_linux_software_single_step): Return
VEC (CORE_ADDR) *. Return NULL instead of 0.
* arm-tdep.c (arm_software_single_step): Return NULL instead of 0.
* arm-tdep.h (arm_software_single_step): Update declaration.
* breakpoint.c (insert_single_step_breakpoints): New function.
* breakpoint.h (insert_single_step_breakpoints): Declare.
* cris-tdep.c (cris_software_single_step): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
* gdbarch.sh (software_single_step): Change it to return
VEC (CORE_ADDR) *.
* gdbarch.c, gdbarch.h: Regenerated.
* infrun.c (maybe_software_singlestep): Adjust.
* mips-tdep.c (mips_deal_with_atomic_sequence): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
(micromips_deal_with_atomic_sequence): Likewise.
(deal_with_atomic_sequence): Likewise.
(mips_software_single_step): Likewise.
* mips-tdep.h (mips_software_single_step): Update declaration.
* moxie-tdep.c (moxie_software_single_step): Likewise.
* nios2-tdep.c (nios2_software_single_step): Likewise.
* ppc-tdep.h (ppc_deal_with_atomic_sequence): Update
declaration.
* record-full.c (record_full_resume): Adjust.
(record_full_wait_1): Likewise.
* rs6000-aix-tdep.c (rs6000_software_single_step): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
* s390-linux-tdep.c (s390_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* spu-tdep.c (spu_software_single_step): Likewise.
* tic6x-tdep.c (tic6x_software_single_step): Likewise.
|
|
This patch renames placed_size to kind.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
* breakpoint.h (struct bp_target_info) <placed_size>: Remove.
<kind>: New field.
Update all users.
|
|
This converts tid_range_parser and get_number_or_range to be classes.
The various tid_range_parser_* and get_number_or_range_* functions
become methods on the respective classes. Then it updates the users
to follow.
The rationale for the change is that this provides better
encapsulation. For example, this forced me to think of a better
interface between tid_range_parser and get_number_or_range, since the
former peeked into the latter's internals a bit too much. That ended
up resulting mostly in these two not-just-straight-1-1 changes:
void
-tid_range_parser_skip (struct tid_range_parser *parser)
+tid_range_parser::skip_range ()
{
...
- tid_range_parser_init (parser, parser->range_parser.end_ptr,
- parser->default_inferior);
+ m_range_parser.skip_range ();
+ init (m_range_parser.string (), m_default_inferior);
}
and:
/* If we successfully parsed a thread number or finished parsing a
thread range, switch back to assuming the next TID is
inferior-qualified. */
- if (parser->range_parser.end_ptr == NULL
- || parser->range_parser.string == parser->range_parser.end_ptr)
+ if (!m_range_parser.in_range ())
{
For the same reason (encapsulation), this moves the enum
tid_range_state definition to within the tid_parser class's scope,
since that is private implementation detail.
While at it, switch to use "bool" for booleans.
gdb/ChangeLog:
2016-10-13 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* tid-parse.h (tid_range_parser): New class.
(enum tid_range_state): Move into tid_range_parser's scope.
Remove TID_RANGE_ prefix from all values.
(tid_range_parser_get_tid, tid_range_parser_get_tid_range)
(tid_range_parser_star_range, tid_range_parser_finished)
(tid_range_parser_skip, tid_range_parser_qualified): Don't
declare.
(tid_is_in_list): Update comment.
* tid-parse.c (tid_range_parser::tid_range_parser): New.
(init, finished, get_string, skip, tid_is_qualified)
(get_tid_or_range, get_tid_range, get_tid, star_range): Rename;
turn into methods.
(tid_is_in_list): Adjust.
* cli/cli-utils.h (number_or_range_parser): New class.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Don't declare.
* cli/cli-utils.c
(number_or_range_parser::number_or_range_parser): New.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Rename; turn into methods.
(number_is_in_list): Adjust.
* breakpoint.c (map_breakpoint_numbers): Adjust. Use bool.
(trace_pass_command, get_tracepoint_by_number): Adjust.
* breakpoint.h (get_tracepoint_by_number): Adjust.
* inferior.c (detach_inferior_command, kill_inferior_command)
(remove_inferior_command): Adjust.
* linespec.c (decode_line_2): Adjust.
* memattr.c (mem_enable_command, mem_disable_command)
(mem_delete_command): Adjust.
* printcmd.c (map_display_numbers): Adjust.
* reverse.c (delete_bookmark_command, bookmarks_info): Adjust.
* thread.c (thread_apply_command): Adjust.
|
|
So the target knows whether we're detaching breakpoints.
Nothing uses the parameter in this patch yet.
gdb/ChangeLog:
2016-08-10 Pedro Alves <palves@redhat.com>
PR gdb/19187
* break-catch-sig.c (signal_catchpoint_remove_location): Adjust
interface.
* break-catch-syscall.c (remove_catch_syscall):
* breakpoint.c (enum remove_bp_reason): Moved to breakpoint.h.
(remove_breakpoint_1): Pass 'reason' down.
(remove_catch_fork, remove_catch_vfork, remove_catch_solib)
(remove_catch_exec, remove_watchpoint, remove_masked_watchpoint)
(base_breakpoint_remove_location, bkpt_remove_location)
(bkpt_probe_remove_location, bkpt_probe_remove_location): Adjust
interface.
* breakpoint.h (enum remove_bp_reason): Moved here from
breakpoint.c.
(struct breakpoint_ops) <remove_location>: Add 'reason' parameter.
* corelow.c (core_remove_breakpoint): New function.
(init_core_ops): Install it as to_remove_breakpoint method.
* exec.c (exec_remove_breakpoint): New function.
(init_exec_ops): Install it as to_remove_breakpoint method.
* mem-break.c (memory_remove_breakpoint): Adjust interface.
* record-btrace.c (record_btrace_remove_breakpoint): Adjust
interface.
* record-full.c (record_full_remove_breakpoint)
(record_full_core_remove_breakpoint): Adjust interface.
* remote.c (remote_remove_breakpoint): Adjust interface.
* target-debug.h (target_debug_print_enum_remove_bp_reason): New
macro.
* target-delegates.c: Regenerate.
* target.c (target_remove_breakpoint): Add 'reason' parameter.
* target.h (struct target_ops) <to_remove_breakpoint>: Add
'reason' parameter.
(target_remove_breakpoint, memory_remove_breakpoint): Add 'reason'
parameter.
|
|
This patch adds a "pending" attribute to gdb.Breakpoint.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* NEWS: Update.
* python/py-breakpoint.c (bppy_get_pending): New function.
(breakpoint_object_getset): Add entry for "pending".
* breakpoint.h (pending_breakpoint_p): Declare.
* breakpoint.c (pending_breakpoint_p): New function.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* python.texi (Breakpoints In Python): Document
Breakpoint.pending.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* gdb.python/py-breakpoint.exp (test_bkpt_basic): Add "pending"
test.
(test_watchpoints): Likewise.
(test_bkpt_pending): New proc.
|
|
Currently, we always re-set all locations of all breakpoints. This
commit makes us re-set only locations of the current program space.
If we loaded symbols to a program space (e.g., "file" command or some
shared library was loaded), GDB must run through all breakpoints and
determine if any new locations need to be added to the breakpoint.
However, there's no reason to recreate locations for _other_ program
spaces, as those haven't changed.
Similarly, when we create a new inferior, through e.g., a fork, GDB
must run through all breakpoints and determine if any new locations
need to be added to the breakpoint. There's no reason to destroy the
locations of the parent inferior and other inferiors. We know those
won't change.
In addition to being inneficient, resetting breakpoints of inferiors
that are currently running is problematic, because:
- some targets can't read memory while the inferior is running.
- the inferior might exit while we're re-setting its breakpoints,
which may confuse prologue skipping.
I went through all the places where we call breakpoint_re_set, and it
seems to me that all can be changed to only re-set locations of the
current program space.
The patch that reversed threads order in "info threads" etc. happened
to make gdb.threads/fork-plus-thread.exp expose this problem when
testing on x86/-m32. The problem was latent and masked out by chance
by the code-cache:
https://sourceware.org/ml/gdb-patches/2016-01/msg00213.html
Tested on x86-64 F20, native (-m64/-m32) and extended-remote
gdbserver.
Fixes the regression discussed in the url above with --target_board=unix/-m32:
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (timeout)
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited)
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
gdb/ChangeLog:
2016-01-19 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
* break-catch-throw.c (re_set_exception_catchpoint): Pass the
current program space down to linespec decoding and breakpoint
location updating.
* breakpoint.c (parse_breakpoint_sals): Adjust calls to
decode_line_full.
(until_break_command): Adjust calls to decode_line_1.
(base_breakpoint_decode_location, bkpt_decode_location): Add
'search_pspace' parameter. Pass it along.
(bkpt_probe_create_sals_from_location): Adjust calls to
parse_probes.
(tracepoint_decode_location, tracepoint_probe_decode_location)
(strace_marker_decode_location): Add 'search_pspace' parameter.
Pass it along.
(all_locations_are_pending): Rewrite to take a breakpoint and
program space as arguments instead.
(hoist_existing_locations): New function.
(update_breakpoint_locations): Add 'filter_pspace' parameter. Use
hoist_existing_locations instead of always removing all locations,
and adjust to all_locations_are_pending change.
(location_to_sals): Add 'search_pspace' parameter. Pass it along.
Don't disable the breakpoint if there are other locations in
another program space.
(breakpoint_re_set_default): Adjust to pass down the current
program space as filter program space.
(decode_location_default): Add 'search_pspace' parameter and pass
it along.
(prepare_re_set_context): Don't switch program space here.
(breakpoint_re_set): Use save_current_space_and_thread instead of
save_current_program_space.
* breakpoint.h (struct breakpoint_ops) <decode_location>: Add
'search_pspace' parameter.
(update_breakpoint_locations): Add 'filter_pspace' parameter.
* cli/cli-cmds.c (edit_command, list_command): Adjust calls to
decode_line_1.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
program space as filter program space.
* linespec.c (struct linespec_state) <search_pspace>: New field.
(create_sals_line_offset, convert_explicit_location_to_sals)
(parse_linespec): Pass the search program space down.
(linespec_state_constructor): Add 'search_pspace' parameter.
Store it.
(linespec_parser_new): Add 'search_pspace' parameter and pass it
along.
(linespec_lex_to_end): Adjust.
(decode_line_full, decode_line_1): Add 'search_pspace' parameter
and pass it along.
(decode_line_with_last_displayed): Adjust.
(collect_symtabs_from_filename, symtabs_from_filename): New
'search_pspace' parameter. Use it.
(find_function_symbols): Pass the search program space down.
* linespec.h (decode_line_1, decode_line_full): Add
'search_pspace' parameter.
* probe.c (parse_probes_in_pspace): New function, factored out
from ...
(parse_probes): ... this. Add 'search_pspace' parameter and use
it.
* probe.h (parse_probes): Add pspace' parameter.
* python/python.c (gdbpy_decode_line): Adjust.
* tracepoint.c (scope_info): Adjust.
|
|
This commit changes GDB like this:
- Program received signal SIGINT, Interrupt.
+ Thread 1 "main" received signal SIGINT, Interrupt.
- Breakpoint 1 at 0x40087a: file threads.c, line 87.
+ Thread 3 "bar" hit Breakpoint 1 at 0x40087a: file threads.c, line 87.
... once the program goes multi-threaded. Until GDB sees a second
thread spawn, the output is still the same as before, per the
discussion back in 2012:
https://www.sourceware.org/ml/gdb/2012-11/msg00010.html
This helps non-stop mode, where you can't easily tell which thread hit
a breakpoint or received a signal:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 19362) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 19366) "foo" (running)
3 Thread 0x7ffff77bf700 (LWP 19367) "bar" (running)
(gdb)
Program received signal SIGUSR1, User defined signal 1.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
(gdb) b threads.c:87
Breakpoint 1 at 0x40087a: file threads.c, line 87.
(gdb)
Breakpoint 1, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
The best the user can do is run "info threads" and try to figure
things out.
It actually also affects all-stop mode, in case of "handle SIG print
nostop":
...
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
...
The above doesn't give any clue that these were different threads
getting the SIGUSR1 signal.
I initially thought of lowercasing "breakpoint" in
"Thread 3 hit Breakpoint 1"
but then after trying it I realized that leaving "Breakpoint"
uppercase helps the eye quickly find the relevant information. It's
also easier to implement not showing anything about threads until the
program goes multi-threaded this way.
Here's a larger example session in non-stop mode:
(gdb) c -a&
Continuing.
(gdb) interrupt -a
(gdb)
Thread 1 "main" stopped.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
Thread 2 "foo" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
Thread 3 "bar" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
b threads.c:87
Breakpoint 4 at 0x40087a: file threads.c, line 87.
(gdb) b threads.c:67
Breakpoint 5 at 0x400811: file threads.c, line 67.
(gdb) c -a&
Continuing.
(gdb)
Thread 3 "bar" hit Breakpoint 4, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
Thread 2 "foo" hit Breakpoint 5, thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) shell kill -SIGINT 31957
(gdb)
Thread 1 "main" received signal SIGINT, Interrupt.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) t 2
[Switching to thread 2, Thread 0x7ffff7fc0700 (LWP 31961)]
#0 thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
(gdb) catch syscall
Catchpoint 6 (any syscall)
(gdb) c&
Continuing.
(gdb)
Thread 2 "foo" hit Catchpoint 6 (call to syscall nanosleep), 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
I'll work on documentation next if this looks agreeable.
This patch applies on top of the star wildcards thread IDs series:
https://sourceware.org/ml/gdb-patches/2016-01/msg00291.html
For convenience, I've pushed this to the
users/palves/show-which-thread-caused-stop branch.
gdb/doc/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Mention that GDB displays the ID and name
of the thread that hit a breakpoint or received a signal.
gdb/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* NEWS: Mention that GDB now displays the ID and name of the
thread that hit a breakpoint or received a signal.
* break-catch-sig.c (signal_catchpoint_print_it): Use
maybe_print_thread_hit_breakpoint.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
(print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
(print_it_catch_exec, print_it_ranged_breakpoint)
(print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
Use maybe_print_thread_hit_breakpoint.
* breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
* gdbthread.h (show_thread_that_caused_stop): Declare.
* infrun.c (print_signal_received_reason): Print which thread
received signal.
* thread.c (show_thread_that_caused_stop): New function.
gdb/testsuite/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.base/async-shell.exp: Adjust expected output.
* gdb.base/dprintf-non-stop.exp: Adjust expected output.
* gdb.base/siginfo-thread.exp: Adjust expected output.
* gdb.base/watchpoint-hw-hit-once.exp: Adjust expected output.
* gdb.java/jnpe.exp: Adjust expected output.
* gdb.threads/clone-new-thread-event.exp: Adjust expected output.
* gdb.threads/continue-pending-status.exp: Adjust expected output.
* gdb.threads/leader-exit.exp: Adjust expected output.
* gdb.threads/manythreads.exp: Adjust expected output.
* gdb.threads/pthreads.exp: Adjust expected output.
* gdb.threads/schedlock.exp: Adjust expected output.
* gdb.threads/siginfo-threads.exp: Adjust expected output.
* gdb.threads/signal-command-multiple-signals-pending.exp: Adjust
expected output.
* gdb.threads/signal-delivered-right-thread.exp: Adjust expected
output.
* gdb.threads/sigthread.exp: Adjust expected output.
* gdb.threads/watchpoint-fork.exp: Adjust expected output.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
Before, on systems that did not support PTRACE_EVENT_CLONE, both GDB and
GDBServer coordinated with libthread_db.so to insert breakpoints at magic
locations in libpthread.so, in order to break at thread creation and
thread death.
Support for thread events was removed from GDBServer as patch:
https://sourceware.org/ml/gdb-patches/2015-11/msg00466.html
This patch removes support for thread events in GDB.
No regressions found on Ubuntu 14.04 x86_64.
gdb/ChangeLog:
* breakpoint.c (remove_thread_event_breakpoints): Remove.
* breakpoint.h (remove_thread_event_breakpoints): Remove
declaration.
* linux-nat.c (in_pid_list_p): Remove.
(lin_lwp_attach_lwp): Remove.
* linux-nat.h (lin_lwp_attach_lwp): Remove declaration.
* linux-thread-db.c (thread_db_use_events): Remove.
(struct thread_db_info) <td_create_bp_addr>: Remove.
<td_death_bp_addr>: Likewise.
<td_ta_event_addr_p>: Likewise.
<td_ta_set_event_p>: Likewise.
<td_ta_clear_event_p>: Likewise.
<td_ta_event_getmsg_p>: Likewise.
<td_thr_event_enable_p>: Likewise.
(attach_thread): Likewise.
(detach_thread): Likewise.
(have_threads_callback): Likewise.
(have_threads): Likewise.
(enable_thread_event): Likewise.
(enable_thread_event_reporting): Likewise.
(try_thread_db_load_1): Remove td_ta_event_addr, td_ta_set_event,
td_ta_clear_event, td_ta_event_getmsg, td_thr_event_enable
initializations.
(try_thread_db_load_1): Remove enable_thread_event_reporting call.
(disable_thread_event_reporting): Remove.
(record_thread): Adapt to thread_db_use_event removal.
(detach_thread): Remove.
(thread_db_detach): Adapt to thread_db_use_event removal.
(check_event): Remove.
(thread_db_wait): Adapt to thread events support removal.
(thread_db_mourn_inferior): Likewise.
(find_new_threads_callback): Likewise.
(find_new_threads_once): Likewise.
(thread_db_update_thread_list): Likewise.
|
|
Assuming displaced stepping is enabled, and a breakpoint is set in the
memory region of the scratch pad, things break. One of two cases can
happen:
#1 - The breakpoint wasn't inserted yet (all threads were stopped), so
after setting up the displaced stepping scratch pad with the
adjusted copy of the instruction we're trying to single-step, we
insert the breakpoint, which corrupts the scratch pad, and the
inferior executes the wrong instruction. (Example below.)
This is clearly unacceptable.
#2 - The breakpoint was already inserted, so setting up the displaced
stepping scratch pad overwrites the breakpoint. This is OK in
the sense that we already assume that no thread is going to
executes the code in the scratch pad range (after initial
startup) anyway.
This commit addresses both cases by simply punting on displaced
stepping if we have a breakpoint in the scratch pad range.
The #1 case above explains a few regressions exposed by the AS/NS
series on x86:
Running ./gdb.dwarf2/callframecfa.exp ...
FAIL: gdb.dwarf2/callframecfa.exp: set display for call-frame-cfa
FAIL: gdb.dwarf2/callframecfa.exp: step 1 for call-frame-cfa
FAIL: gdb.dwarf2/callframecfa.exp: step 2 for call-frame-cfa
FAIL: gdb.dwarf2/callframecfa.exp: step 3 for call-frame-cfa
FAIL: gdb.dwarf2/callframecfa.exp: step 4 for call-frame-cfa
Running ./gdb.dwarf2/typeddwarf.exp ...
FAIL: gdb.dwarf2/typeddwarf.exp: continue to breakpoint: continue to typeddwarf.c:53
FAIL: gdb.dwarf2/typeddwarf.exp: check value of x at typeddwarf.c:53
FAIL: gdb.dwarf2/typeddwarf.exp: check value of y at typeddwarf.c:53
FAIL: gdb.dwarf2/typeddwarf.exp: check value of z at typeddwarf.c:53
FAIL: gdb.dwarf2/typeddwarf.exp: continue to breakpoint: continue to typeddwarf.c:73
FAIL: gdb.dwarf2/typeddwarf.exp: check value of w at typeddwarf.c:73
FAIL: gdb.dwarf2/typeddwarf.exp: check value of x at typeddwarf.c:73
FAIL: gdb.dwarf2/typeddwarf.exp: check value of y at typeddwarf.c:73
FAIL: gdb.dwarf2/typeddwarf.exp: check value of z at typeddwarf.c:73
Enabling "maint set target-non-stop on" implies displaced stepping
enabled as well, and it's the latter that's to blame here. We can see
the same failures with "maint set target-non-stop off + set displaced
on".
Diffing (good/bad) gdb.log for callframecfa.exp shows:
@@ -99,29 +99,29 @@ Breakpoint 2 at 0x80481b0: file q.c, lin
continue
Continuing.
-Breakpoint 2, func (arg=77) at q.c:2
+Breakpoint 2, func (arg=52301) at q.c:2
2 in q.c
(gdb) PASS: gdb.dwarf2/callframecfa.exp: continue to breakpoint: continue to breakpoint for call-frame-cfa
display arg
-1: arg = 77
-(gdb) PASS: gdb.dwarf2/callframecfa.exp: set display for call-frame-cfa
+1: arg = 52301
+(gdb) FAIL: gdb.dwarf2/callframecfa.exp: set display for call-frame-cfa
The problem is here, when setting up the func call:
Breakpoint 1, main (argc=-13345, argv=0x0) at q.c:7
7 in q.c
(gdb) disassemble
Dump of assembler code for function main:
0x080481bb <+0>: push %ebp
0x080481bc <+1>: mov %esp,%ebp
0x080481be <+3>: sub $0x4,%esp
=> 0x080481c1 <+6>: movl $0x4d,(%esp)
0x080481c8 <+13>: call 0x80481b0 <func>
0x080481cd <+18>: leave
0x080481ce <+19>: ret
End of assembler dump.
(gdb) disassemble /r
Dump of assembler code for function main:
0x080481bb <+0>: 55 push %ebp
0x080481bc <+1>: 89 e5 mov %esp,%ebp
0x080481be <+3>: 83 ec 04 sub $0x4,%esp
=> 0x080481c1 <+6>: c7 04 24 4d 00 00 00 movl $0x4d,(%esp)
0x080481c8 <+13>: e8 e3 ff ff ff call 0x80481b0 <func>
0x080481cd <+18>: c9 leave
0x080481ce <+19>: c3 ret
End of assembler dump.
Note the breakpoint at main is set at 0x080481c1. Right at the
instruction that sets up func's argument. Executing that instruction
should write 0x4d to the address pointed at by $esp. However, if we
stepi, the program manages to write 52301/0xcc4d there instead (0xcc
is int3, the x86 breakpoint instruction), because the breakpoint
address is 4 bytes inside the scratch pad location, which is
0x080481bd:
(gdb) p 0x080481c1 - 0x080481bd
$1 = 4
IOW, instead of executing:
"c7 04 24 4d 00 00 00" [ movl $0x4d,(%esp) ]
the inferior executes:
"c7 04 24 4d cc 00 00" [ movl $0xcc4d,(%esp) ]
gdb/ChangeLog:
2015-10-30 Pedro Alves <palves@redhat.com>
* breakpoint.c (breakpoint_in_range_p)
(breakpoint_location_address_range_overlap): New functions.
* breakpoint.h (breakpoint_in_range_p): New declaration.
* infrun.c (displaced_step_prepare_throw): If there's a breakpoint
in the scratch pad range, don't displaced step.
|
|
This adds an object oriented replacement for the "struct continuation"
mechanism, and converts the stepping commands (step, next, stepi,
nexti) and the "finish" commands to use it.
It adds a new thread "class" (struct thread_fsm) that contains the
necessary info and callbacks to manage the state machine of a thread's
execution command.
This allows getting rid of some hacks. E.g., in fetch_inferior_event
and normal_stop we no longer need to know whether a thread is doing a
multi-step (e.g., step N). This effectively makes the
intermediate_continuations unused -- they'll be garbage collected in a
separate patch. (They were never a proper abstraction, IMO. See how
fetch_inferior_event needs to check step_multi before knowing whether
to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.)
The target async vs !async uiout hacks in mi_on_normal_stop go away
too.
print_stop_event is no longer called from normal_stop. Instead it is
now called from within each interpreter's normal_stop observer. This
clears the path to make each interpreter print a stop event the way it
sees fit. Currently we have some hacks in common code to
differenciate CLI vs TUI vs MI around this area.
The "finish" command's FSM class stores the return value plus that
value's position in the value history, so that those can be printed to
both MI and CLI's streams. This fixes the CLI "finish" command when
run from MI -- it now also includes the function's return value in the
CLI stream:
(gdb)
~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n"
~"35\t}\n"
+~"Value returned is $1 = 0\n"
*stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0"
-FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output
+PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_OBS): Add thread-fsm.o.
* breakpoint.c (handle_jit_event): Print debug output.
(bpstat_what): Split event callback handling to ...
(bpstat_run_callbacks): ... this new function.
(momentary_bkpt_print_it): No longer handle bp_finish here.
* breakpoint.h (bpstat_run_callbacks): Declare.
* gdbthread.h (struct thread_info) <step_multi>: Delete field.
<thread_fsm>: New field.
(thread_cancel_execution_command): Declare.
* infcmd.c: Include thread-fsm.h.
(struct step_command_fsm): New.
(step_command_fsm_ops): New global.
(new_step_command_fsm, step_command_fsm_prepare): New functions.
(step_1): Adjust to use step_command_fsm_prepare and
prepare_one_step.
(struct step_1_continuation_args): Delete.
(step_1_continuation): Delete.
(step_command_fsm_should_stop): New function.
(step_once): Delete.
(step_command_fsm_clean_up, step_command_fsm_async_reply_reason)
(prepare_one_step): New function, based on step_once.
(until_next_command): Remove step_multi reference.
(struct return_value_info): New.
(print_return_value): Rename to ...
(print_return_value_1): ... this. New struct return_value_info
parameter. Adjust.
(print_return_value): Reimplement as wrapper around
print_return_value_1.
(struct finish_command_fsm): New.
(finish_command_continuation): Delete.
(finish_command_fsm_ops): New global.
(new_finish_command_fsm, finish_command_fsm_should_stop): New
functions.
(finish_command_fsm_clean_up, finish_command_fsm_return_value):
New.
(finish_command_continuation_free_arg): Delete.
(finish_command_fsm_async_reply_reason): New.
(finish_backward, finish_forward): Change symbol parameter to a
finish_command_fsm. Adjust.
(finish_command): Create a finish_command_fsm. Adjust.
* infrun.c: Include "thread-fsm.h".
(clear_proceed_status_thread): Delete the thread's FSM.
(infrun_thread_stop_requested_callback): Cancel the thread's
execution command.
(clean_up_just_stopped_threads_fsms): New function.
(fetch_inferior_event): Handle the event_thread's should_stop
method saying the command isn't done yet.
(process_event_stop_test): Run breakpoint callbacks here.
(print_stop_event): Rename to ...
(print_stop_location): ... this.
(restore_current_uiout_cleanup): New function.
(print_stop_event): Reimplement.
(normal_stop): No longer notify the end_stepping_range observers
here handle "step N" nor "finish" here. No longer call
print_stop_event here.
* infrun.h (struct return_value_info): Forward declare.
(print_return_value): Declare.
(print_stop_event): Change prototype.
* thread-fsm.c: New file.
* thread-fsm.h: New file.
* thread.c: Include "thread-fsm.h".
(thread_cancel_execution_command): New function.
(clear_thread_inferior_resources): Call it.
* cli/cli-interp.c (cli_on_normal_stop): New function.
(cli_interpreter_init): Install cli_on_normal_stop as normal_stop
observer.
* mi/mi-interp.c: Include "thread-fsm.h".
(restore_current_uiout_cleanup): Delete.
(mi_on_normal_stop): If the thread has an FSM associated, and it
finished, ask it for the async-reply-reason to print. Always call
print_stop_event here, regardless of the top-level interpreter.
Check bpstat_what to tell whether an asynchronous breakpoint hit
triggered.
* tui/tui-interp.c (tui_on_normal_stop): New function.
(tui_init): Install tui_on_normal_stop as normal_stop observer.
gdb/testsuite/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-cli.exp: Add CLI finish tests.
|
|
This patch converts the code base to use the new struct event_location
API being introduced. This patch preserves the current functionality and
adds no new features.
The "big picture" API usage introduced by this patch may be illustrated
with a simple exmaple. Where previously developers would write:
void
my_command (char *arg, int from_tty)
{
create_breakpoint (..., arg, ...);
...
}
one now uses:
void
my_command (char *arg, int from_tty)
{
struct event_locaiton *location;
struct cleanup *back_to;
location = string_to_event_locaiton (&arg, ...);
back_to = make_cleanup_delete_event_location (location);
create_breakpoint (..., location, ...);
do_cleanups (back_to);
}
Linespec-decoding functions (now called location-decoding) such as
decode_line_full no longer skip argument pointers over processed input.
That functionality has been moved into string_to_event_location as
demonstrated above.
gdb/ChangeLog
* ax-gdb.c: Include location.h.
(agent_command_1) Use linespec location instead of address
string.
* break-catch-throw.c: Include location.h.
(re_set_exception_catchpoint): Use linespec locations instead
of address strings.
* breakpoint.c: Include location.h.
(create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, update_breakpoints_after_exec):
Use linespec location instead of address string.
(print_breakpoint_location): Use locations and
event_location_to_string.
Print extra_string for pending locations for non-MI streams.
(print_one_breakpoint_location): Use locations and
event_location_to_string.
(init_raw_breakpoint_without_location): Initialize b->location.
(create_thread_event_breakpoint): Use linespec location instead of
address string.
(init_breakpoint_sal): Likewise.
Only save extra_string if it is non-NULL and not the empty string.
Use event_location_to_string instead of `addr_string'.
Constify `p' and `endp'.
Use skip_spaces_const/skip_space_const instead of non-const versions.
Copy the location into the breakpoint.
If LOCATION is NULL, save the breakpoint address as a linespec location
instead of an address string.
(create_breakpoint_sal): Change `addr_string' parameter to a struct
event_location. All uses updated.
(create_breakpoints_sal): Likewise for local variable `addr_string'.
(parse_breakpoint_sals): Use locations instead of address strings.
Remove check for empty linespec with conditional.
Refactor.
(decode_static_tracepoint_spec): Make argument const and update
function.
(create_breakpoint): Change `arg' to a struct event_location and
rename.
Remove `copy_arg' and `addr_start'.
If EXTRA_STRING is empty, set it to NULL.
Don't populate `canonical' for pending breakpoints.
Pass `extra_string' to find_condition_and_thread.
Clear `extra_string' if `rest' was NULL.
Do not error with "garbage after location" if setting a dprintf
breakpoint.
Copy the location into the breakpoint instead of an address string.
(break_command_1): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Check against `arg_cp' for a probe linespec.
(dprintf_command): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Throw an exception if no format string was specified.
(print_recreate_ranged_breakpoint): Use event_location_to_string
instead of address strings.
(break_range_command, until_break_command)
(init_ada_exception_breakpoint): Use locations instead
of address strings.
(say_where): Print out extra_string for pending locations.
(base_breakpoint_dtor): Delete `location' and `location_range_end' of
the breakpoint.
(base_breakpoint_create_sals_from_location): Use struct event_location
instead of address string.
Remove `addr_start' and `copy_arg' parameters.
(base_breakpoint_decode_location): Use struct event_location instead of
address string.
(bkpt_re_set): Use locations instead of address strings.
Use event_location_empty_p to check for unset location.
(bkpt_print_recreate): Use event_location_to_string instead of
an address string.
Print out extra_string for pending locations.
(bkpt_create_sals_from_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location): Use struct event_location
instead of address string.
(bkpt_probe_decode_location): Use struct event_location instead of
address string.
(tracepoint_print_recreate): Use event_location_to_string to
recreate the tracepoint.
(tracepoint_create_sals_from_location, tracepoint_decode_location)
(tracepoint_probe_create_sals_from_location)
(tracepoint_probe_decode_location): Use struct event_location
instead of address string.
(dprintf_print_recreate): Use event_location_to_string to recreate
the dprintf.
(dprintf_re_set): Remove check for valid/missing format string.
(strace_marker_create_sals_from_location)
(strace_marker_create_breakpoints_sal, strace_marker_decode_location)
(update_static_tracepoint): Use struct event_location instead of
address string.
(location_to_sals): Likewise.
Pass `extra_string' to find_condition_and_thread.
For newly resolved pending breakpoint locations, clear the location's
string representation.
Assert that the breakpoint's condition string is NULL when
condition_not_parsed.
(breakpoint_re_set_default, create_sals_from_location_default)
(decode_location_default, trace_command, ftrace_command)
(strace_command, create_tracepoint_from_upload): Use locations
instead of address strings.
* breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
Use struct event_location instead of address string.
Update all uses.
<decode_location>: Likewise.
(struct breakpoint) <addr_string>: Change to struct event_location
and rename `location'.
<addr_string_range_end>: Change to struct event_location and rename
`location_range_end'.
(create_breakpoint): Use struct event_location instead of address
string.
* cli/cli-cmds.c: Include location.h.
(edit_command, list_command): Use locations instead of address strings.
* elfread.c: Include location.h.
(elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
* guile/scm-breakpoint.c: Include location.h.
(bpscm_print_breakpoint_smob): Use event_location_to_string.
(gdbscm_register_breakpoint): Use locations instead of address
strings.
* linespec.c: Include location.h.
(struct ls_parser) <stream>: Change to const char *.
(PARSER_STREAM): Update.
(lionespec_lexer_lex_keyword): According to find_condition_and_thread,
keywords must be followed by whitespace.
(canonicalize_linespec): Save a linespec location into `canonical'.
Save a canonical linespec into `canonical'.
(parse_linespec): Change `argptr' to const char * and rename `arg'.
All uses updated.
Update function description.
(linespec_parser_new): Initialize `parser'.
Update initialization of parsing stream.
(event_location_to_sals): New function.
(decode_line_full): Change `argptr' to a struct event_location and
rename it `location'.
Use locations instead of address strings.
Call event_location_to_sals instead of parse_linespec.
(decode_line_1): Likewise.
(decode_line_with_current_source, decode_line_with_last_displayed)
Use locations instead of address strings.
(decode_objc): Likewise.
Change `argptr' to const char * and rename `arg'.
(destroy_linespec_result): Delete the linespec result's location
instead of freeing the address string.
* linespec.h (struct linespec_result) <addr_string>: Change to
struct event_location and rename to ...
<location>: ... this.
(decode_line_1, decode_line_full): Change `argptr' to struct
event_location. All callers updated.
* mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
(mi_cmd_break_insert_1): Use locations instead of address strings.
Throw an error if there was "garbage" at the end of the specified
linespec.
* probe.c: Include location.h.
(parse_probes): Change `argptr' to struct event_location.
Use event locations instead of address strings.
* probe.h (parse_probes): Change `argptr' to struct event_location.
* python/py-breakpoint.c: Include location.h.
(bppy_get_location): Constify local variable `str'.
Use event_location_to_string.
(bppy_init): Use locations instead of address strings.
* python/py-finishbreakpoint.c: Include location.h.
(bpfinishpy_init): Remove local variable `addr_str'.
Use locations instead of address strings.
* python/python.c: Include location.h.
(gdbpy_decode_line): Use locations instead of address strings.
* remote.c: Include location.h.
(remote_download_tracepoint): Use locations instead of address
strings.
* spu-tdep.c: Include location.h.
(spu_catch_start): Remove local variable `buf'.
Use locations instead of address strings.
* tracepoint.c: Include location.h.
(scope_info): Use locations instead of address strings.
(encode_source_string): Constify parameter `src'.
* tracepoint.h (encode_source_string): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/dprintf-pending.exp: Update dprintf "without format"
test.
Add tests for missing ",FMT" and ",".
|
|
This patch renames all occurrances of "addr_string" and "address
string" in the breakpoint/linespec APIs. This will emphasize the
change from address strings used in setting breakpoints (et al) to the
new locations-based API introduced in subsequent patches.
gdb/ChangeLog:
* breakpoint.h (struct breakpoint_ops) <create_sals_from_address>:
Renamed to create_sals_from_location.
<decode_linespec>: Renamed to decode_location.
Update all callers.
* breakpoint.c (create_sals_from_address_default): Renamed to ...
(create_sals_from_location_default): ... this.
(addr_string_to_sals): Renamed to ...
(location_to_sals): ... this.
(decode_linespec_default): Renamed to ...
(decode_location_default): ... this.
(base_breakpoint_create_sals_from_address): Renamed to ...
(base_breakpoint_create_sals_from_location): ... this.
(bkpt_create_sals_from_address): Renamed to ...
(bkpt_create_sals_from_location): ... this.
(bkpt_decode_linespec): Renamed to ...
(bkpt_decode_location): ... this.
(bkpt_probe_create_sals_from_address): Renamed to ...
(bkpt_probe_create_sals_from_location): ... this.
(tracepoint_create_sals_from_address): Renamed to ...
(tracepoint_create_sals_from_location): ... this.
(tracepoint_decode_linespec): Renamed to ...
(tracepoint_decode_location): ... this.
(tracepoint_probe_create_sals_from_address): Renamed to ...
(tracepoint_probe_create_sals_from_location): ... this.
(tracepoint_probe_decode_linespec): Renamed to ...
(tracepoint_probe_decode_location): ... this.
(strace_marker_create_sals_from_address): Renamed to ...
(strace_marker_create_sals_from_location): ... this.
(decode_linespec_default): Renamed to ...
(decode_location_default): ... this.
|
|
make_breakpoint_permanent is no longer used anywhere and can be
safely removed.
gdb/ChangeLog:
2015-06-17 Luis Machado <lgustavo@codesourcery.com>
* breakpoint.c (make_breakpoint_permanent): Remove unused
function.
* breakpoint.h (make_breakpoint_permanent): Remove declaration.
|
|
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
* breakpoint.h (set_breakpoint_condition): Update declaration.
|
|
This commit implements the 'breakpoint_find_if' function, which allows
code external to gdb/breakpoint.c to iterate through the list of
'struct breakpoint *'. This is needed in order to create the
'gdb/break-catch-syscall.c' file, because one of its functions
(catching_syscall_number) needs to do this iteration.
My first thought was to share the ALL_BREAKPOINTS* macros on
gdb/breakpoint.h, but they use a global variable local to
gdb/breakpoint.c, and I did not want to share that variable. So, in
order to keep the minimal separation, I decided to implement this
way of iterating through the existing 'struct breakpoint *'.
This function was based on BFD's bfd_sections_find_if. If the
user-provided function returns 0, the iteration proceeds. Otherwise,
the iteration stops and the function returns the 'struct breakpoint *'
that is being processed. This means that the return value of this
function can be either NULL or a pointer to a 'struct breakpoint'.
gdb/ChangeLog:
2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
* breakpoint.c (breakpoint_find_if): New function.
* breakpoint.h (breakpoint_find_if): New prototype.
|
|
The moribund locations heuristics are problematic. This patch teaches
GDB about targets that can reliably tell whether a trap was caused by
a software or hardware breakpoint, and thus don't need moribund
locations, thus bypassing all the problems that mechanism has.
The non-stop-fair-events.exp test is frequently failing currently.
E.g., see https://sourceware.org/ml/gdb-testers/2015-q1/msg03148.html.
The root cause is a fundamental problem with moribund locations. For
example, the stepped_breakpoint logic added by af48d08f breaks in this
case (which is what happens with that test):
- Step thread A, no breakpoint is set at PC.
- The kernel doesn't schedule thread A yet.
- Insert breakpoint at A's PC, for some reason (e.g., a step-resume
breakpoint for thread B).
- Kernel finally schedules thread A.
- thread A's stepped_breakpoint flag is not set, even though it now
stepped a breakpoint instruction.
- adjust_pc_after_break gets the PC wrong, because PC == PREV_PC, but
stepped_breakpoint is not set.
We needed the stepped_breakpoint logic to workaround moribund
locations, because otherwise adjust_pc_after_break could apply an
adjustment when it shouldn't just because there _used_ to be a
breakpoint at PC (a moribund breakpoint location). For example, on
x86, that's wrong if the thread really hasn't executed an int3, but
instead executed some other 1-byte long instruction. Getting the PC
adjustment wrong of course leads to the inferior executing the wrong
instruction.
Other problems with moribund locations are:
- if a true SIGTRAP happens to be raised when the program is
executing the PC that used to have a breakpoint, GDB will assume
that is a trap for a breakpoint that has recently been removed, and
thus we miss reporting the random signal to the user.
- to minimize that, we get rid of moribund location after a while.
That while is defined as just a certain number of events being
processed. That number of events sometimes passes by before a
delayed breakpoint is processed, and GDB confuses the trap for a
random signal, thus reporting the random trap. Once the user
resumes the thread, the program crashes because the PC was not
adjusted...
The fix for all this is to bite the bullet and get rid of heuristics
and instead rely on the target knowing accurately what caused the
SIGTRAP. The target/kernel/stub is in the best position to know what
that, because it can e.g. consult priviledged CPU flags GDB has no
access to, or by knowing which exception vector entry was called when
the instruction trapped, etc. Most debug APIs I've seen to date
report breakpoint hits as a distinct event in some fashion. For
example, on the Linux kernel, whether a breakpoint was executed is
exposed to userspace in the si_code field of the SIGTRAP's siginfo.
On Windows, the debug API reports a EXCEPTION_BREAKPOINT exception
code.
We needed to keep around deleted breakpoints in an on-the-side list
(the moribund locations) for two main reasons:
- Know that a SIGTRAP actually is a delayed event for a hit of a
breakpoint that was removed before the event was processed, and
thus should not be reported as a random signal.
- So we still do the decr_pc_after_break adjustment in that case, so
that the thread is resumed at the correct address.
In the new model, if GDB processes an event the target tells is a
breakpoint trap, and GDB doesn't find the corresponding breakpoint in
its breakpoint tables, it means that event is a delayed event for a
breakpoint that has since been removed, and thus the event should be
ignored.
For the decr_pc_after_after issue, it ends up being much simpler that
on targets that can reliably tell whether a breakpoint trapped, for
the breakpoint trap to present the PC already adjusted. Proper
multi-threading support already implies that targets needs to be doing
decr_pc_after_break adjustment themselves, otherwise for example, in
all-stop if two threads hit a breakpoint simultaneously, and the user
does "info threads", he'll see the non-event thread that hit the
breakpoint stopped at the wrong PC.
This way (target adjusts) also ends up eliminating the need for some
awkward re-incrementing of the PC in the record-full and Linux targets
that we do today, and the need for the target_decr_pc_after_break
hook.
If the target always adjusts, then there's a case where GDB needs to
re-increment the PC. Say, on x86, an "int3" instruction that was
explicitly written in the program traps. In this case, GDB should
report a random SIGTRAP signal to the user, with the PC pointing at
the instruction past the int3, just like if GDB was not debugging the
program. The user may well decide to pass the SIGTRAP to the program
because the program being debugged has a SIGTRAP handler that handles
its own breakpoints, and expects the PC to be unadjusted.
Tested on x86-64 Fedora 20.
gdb/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* breakpoint.c (need_moribund_for_location_type): New function.
(bpstat_stop_status): Don't skipping checking moribund locations
of breakpoint types which the target tell caused a stop.
(program_breakpoint_here_p): New function, factored out from ...
(bp_loc_is_permanent): ... this.
(update_global_location_list): Don't create a moribund location if
the target supports reporting stops of the type of the removed
breakpoint.
* breakpoint.h (program_breakpoint_here_p): New declaration.
* infrun.c (adjust_pc_after_break): Return early if the target has
already adjusted the PC. Add comments.
(handle_signal_stop): If nothing explains a signal, and the target
tells us the stop was caused by a software breakpoint, check if
there's a breakpoint instruction in the memory. If so, adjust the
PC before presenting the stop to the user. Otherwise, ignore the
trap. If nothing explains a signal, and the target tells us the
stop was caused by a hardware breakpoint, ignore the trap.
* target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
to_supports_stopped_by_hw_breakpoint>: New fields.
(target_stopped_by_sw_breakpoint)
(target_supports_stopped_by_sw_breakpoint)
(target_stopped_by_hw_breakpoint)
(target_supports_stopped_by_hw_breakpoint): Define.
* target-delegates.c: Regenerate.
|
|
Building GDB in C++, we get:
src/gdb/breakpoint.h:529:8: error: use of enum ‘print_stop_action’ without previous declaration
We can't forward declare enums in C++.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* breakpoint.h (enum print_stop_action): Move further up in the
file.
|
|
Running the testsuite with a series that reimplements user-visible
all-stop behavior on top of a target running in non-stop mode revealed
problems related to event starvation avoidance.
For example, I see
gdb.threads/signal-while-stepping-over-bp-other-thread.exp failing.
What happens is that GDB core never gets to see the signal event. It
ends up processing the events for the same threads over an over,
because Linux's waitpid(-1, ...) returns that first task in the task
list that has an event, starving threads on the tail of the task list.
So I wrote a non-stop mode test originally inspired by
signal-while-stepping-over-bp-other-thread.exp, to stress this
independently of all-stop on top of non-stop. Fixing it required the
changes described below. The test will be added in a following
commit.
1) linux-nat.c has code in place that picks an event LWP at random out
of all that have had events. This is because on the kernel side,
"waitpid(-1, ...)" just walks the task list linearly looking for the
first that had an event. But, this code is currently only used in
all-stop mode. So with a multi-threaded program that has multiple
events triggering debug events in parallel, GDB ends up starving some
threads.
To make the event randomization work in non-stop mode too, the patch
makes us pull out all the already pending events on the kernel side,
with waitpid, before deciding which LWP to report to the core.
There's some code in linux_wait that takes care of leaving events
pending if they were for LWPs the caller is not interested in. The
patch moves that to linux_nat_filter_event, so that we only have one
place that leaves events pending. With that in place, conceptually,
the flow is simpler and more normalized:
#1 - walk the LWP list looking for an LWP with a pending event to report.
#2 - if no pending event, pull events out of the kernel, and store
them in the LWP structures as pending.
#3- goto #1.
2) Then, currently the event randomization code only considers SIGTRAP
(or trap-like) events. That means that if e.g., have have multiple
threads stepping in parallel that hit a breakpoint that needs stepping
over, and one gets a signal, the signal may end up never getting
processed, because GDB will always be giving priority to the SIGTRAPs.
The patch fixes this by making the randomization code consider all
kinds of pending events.
3) If multiple threads hit a breakpoint, we report one of those, and
"cancel" the others. Cancelling means decrementing the PC, and
discarding the event. If the next time the LWP is resumed the
breakpoint is still installed, the LWP should hit it again, and we'll
report the hit then. The problem I found is that this delays threads
from advancing too much, with the kernel potentially ending up
scheduling the same threads over and over, and others not advancing.
So the patch switches away from cancelling the breakpoints, and
instead remembering that the LWP had stopped for a breakpoint. If on
resume the breakpoint is still installed, we report it. If it's no
longer installed, we discard the pending event then. This is actually
how GDBserver used to handle this before d50171e4 (Teach linux
gdbserver to step-over-breakpoints), but with the difference that back
then we'd delay adjusting the PC until resuming, which made it so that
"info threads" could wrongly see threads with unadjusted PCs.
gdb/
2015-01-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (hardware_breakpoint_inserted_here_p): New
function.
* breakpoint.h (hardware_breakpoint_inserted_here_p): New
declaration.
* linux-nat.c (linux_nat_status_is_event): Move higher up in file.
(linux_resume_one_lwp): Store the thread's PC. Adjust to clear
stop_reason.
(check_stopped_by_watchpoint): New function.
(save_sigtrap): Reimplement.
(linux_nat_stopped_by_watchpoint): Adjust.
(linux_nat_lp_status_is_event): Delete.
(stop_wait_callback): Only call save_sigtrap after storing the
pending status.
(status_callback): If the thread had been stopped for a breakpoint
that has since been removed, discard the event and resume the LWP.
(count_events_callback, select_event_lwp_callback): Use
lwp_status_pending_p instead of linux_nat_lp_status_is_event.
(cancel_breakpoint): Rename to ...
(check_stopped_by_breakpoint): ... this. Record whether the LWP
stopped for a software breakpoint or hardware breakpoint.
(select_event_lwp): Only give preference to the stepping LWP in
all-stop mode. Adjust comments.
(stop_and_resume_callback): Remove references to new_pending_p.
(linux_nat_filter_event): Likewise. Leave exit events of the
leader thread pending here. Handle signal short circuiting here.
Only call save_sigtrap after storing the pending waitstatus.
(linux_nat_wait_1): Remove 'retry' label. Remove references to
new_pending. Don't handle leaving events the caller is not
interested in pending here, nor handle signal short-circuiting
here. Also give equal priority to all LWPs that have had events
in non-stop mode. If reporting a software breakpoint event,
unadjust the LWP's PC.
* linux-nat.h (enum lwp_stop_reason): New.
(struct lwp_info) <stop_pc>: New field.
(struct lwp_info) <stopped_by_watchpoint>: Delete field.
(struct lwp_info) <stop_reason>: New field.
* x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
"permanent"-ness is currently a property of the breakpoint. But, it
should actually be an implementation detail of a _location_. Consider
this bit in infrun.c:
/* Normally, by the time we reach `resume', the breakpoints are either
removed or inserted, as appropriate. The exception is if we're sitting
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
if (breakpoint_here_p (aspace, pc) == permanent_breakpoint_here)
{
if (gdbarch_skip_permanent_breakpoint_p (gdbarch))
gdbarch_skip_permanent_breakpoint (gdbarch, regcache);
else
error (_("\
The program is stopped at a permanent breakpoint, but GDB does not know\n\
how to step past a permanent breakpoint on this architecture. Try using\n\
a command like `return' or `jump' to continue execution."));
}
This will wrongly skip a non-breakpoint instruction if we have a
multiple location breakpoint where the whole breakpoint was set to
"permanent" because one of the locations happened to be permanent,
even if the one GDB is resuming from is not.
Related, because the permanent breakpoints are only marked as such in
init_breakpoint_sal, we currently miss marking momentary breakpoints
as permanent. A test added by a following patch trips on that.
Making permanent-ness be per-location, and marking locations as such
in add_location_to_breakpoint, the natural place to do this, fixes
this issue...
... and then exposes a latent issue with mark_breakpoints_out. It's
clearing the inserted flag of permanent breakpoints. This results in
assertions failing like this:
Breakpoint 1, main () at testsuite/gdb.base/callexit.c:32
32 return 0;
(gdb) call callexit()
[Inferior 1 (process 15849) exited normally]
gdb/breakpoint.c:12854: internal-error: allegedly permanent breakpoint is not actually inserted
A problem internal to GDB has been detected,
further debugging may prove unreliable.
The call dummy breakpoint, which is a momentary breakpoint, is set on
top of a manually inserted breakpoint instruction, and so is now
rightfully marked as a permanent breakpoint. See "Write a legitimate
instruction at the point where the infcall breakpoint is going to be
inserted." comment in infcall.c.
Re. make_breakpoint_permanent. That's only called by solib-pa64.c.
Permanent breakpoints were actually originally invented for HP-UX [1].
I believe that that call (the only one in the tree) is unnecessary
nowadays, given that nowadays the core breakpoints code analyzes the
instruction under the breakpoint to automatically detect whether it's
setting a breakpoint on top of a breakpoint instruction in the
program. I know close to nothing about HP-PA/HP-UX, though.
[1] https://sourceware.org/ml/gdb-patches/1999-q3/msg00245.html, and
https://sourceware.org/ml/gdb-patches/1999-q3/msg00242.html
In addition to the per-location issue, "permanent breakpoints" are
currently always displayed as enabled=='n':
(gdb) b main
Breakpoint 3 at 0x40053c: file ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S, line 29.
(gdb) info breakpoints
Num Type Disp Enb Address What
3 breakpoint keep n 0x000000000040053c ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S:29
But OTOH they're always enabled; there's no way to disable them...
In turn, this means that if one adds commands to such a breakpoint,
they're _always_ run:
(gdb) start
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.arch/i386-permbkpt
...
Temporary breakpoint 1, main () at ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S:29
29 int3
(gdb) b main
Breakpoint 2 at 0x40053c: file ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S, line 29.
(gdb) info breakpoints
Num Type Disp Enb Address What
2 breakpoint keep n 0x000000000040053c ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S:29
(gdb) commands
Type commands for breakpoint(s) 2, one per line.
End with a line saying just "end".
>echo "hello!"
>end
(gdb) disable 2
(gdb) start
The program being debugged has been started already.
Start it from the beginning? (y or n) y
Temporary breakpoint 3 at 0x40053c: file ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S, line 29.
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.arch/i386-permbkpt
Breakpoint 2, main () at ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S:29
29 int3
"hello!"(gdb)
IMO, one should be able to disable such a breakpoint, and GDB should
then behave just like if the user hadn't created the breakpoint in the
first place (that is, report a SIGTRAP).
By making permanent-ness a property of the location, and eliminating
the bp_permanent enum enable_state state ends up fixing that as well.
No tests are added for these changes yet; they'll be added in a follow
up patch, as skipping permanent breakpoints is currently broken and
trips on an assertion in infrun.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2014-11-12 Pedro Alves <palves@redhat.com>
Mark locations as permanent, not the whole breakpoint.
* breakpoint.c (remove_breakpoint_1, remove_breakpoint): Adjust.
(mark_breakpoints_out): Don't mark permanent breakpoints as
uninserted.
(breakpoint_init_inferior): Use mark_breakpoints_out.
(breakpoint_here_p): Adjust.
(bpstat_stop_status, describe_other_breakpoints): Remove handling
of permanent breakpoints.
(make_breakpoint_permanent): Mark each location as permanent,
instead of marking the breakpoint.
(add_location_to_breakpoint): If the location is permanent, mark
it as such, and as inserted.
(init_breakpoint_sal): Don't make the breakpoint permanent here.
(bp_location_compare, update_global_location_list): Adjust.
(update_breakpoint_locations): Don't make the breakpoint permanent
here.
(disable_breakpoint, enable_breakpoint_disp): Don't skip permanent
breakpoints.
* breakpoint.h (enum enable_state) <bp_permanent>: Delete field.
(struct bp_location) <permanent>: New field.
* guile/scm-breakpoint.c (bpscm_enable_state_to_string): Remove
reference to bp_permanent.
|
|
Used to be necessary for the thread-hop code, but that's gone now.
Nothing uses this anymore.
gdb/
2014-11-04 Pedro Alves <palves@redhat.com>
* breakpoint.c (breakpoint_thread_match): Delete function.
* breakpoint.h (breakpoint_thread_match): Delete declaration.
|
|
This patch finally makes each thread have its own set of single-step
breakpoints. This paves the way to have multiple threads software
single-stepping, though this patch doesn't flip that switch on yet.
That'll be done on a subsequent patch.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (single_step_breakpoints): Delete global.
(insert_single_step_breakpoint): Adjust to store the breakpoint
pointer in the current thread.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Delete functions.
(breakpoint_has_location_inserted_here): Make extern.
(single_step_breakpoint_inserted_here_p): Adjust to walk the
breakpoint list.
* breakpoint.h (breakpoint_has_location_inserted_here): New
declaration.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Remove declarations.
* gdbthread.h (struct thread_control_state)
<single_step_breakpoints>: New field.
(delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New declarations.
* infrun.c (follow_exec): Also clear the single-step breakpoints.
(singlestep_breakpoints_inserted_p, singlestep_ptid)
(singlestep_pc): Delete globals.
(infrun_thread_ptid_changed): Remove references to removed
globals.
(resume_cleanups): Delete the current thread's single-step
breakpoints.
(maybe_software_singlestep): Remove references to removed globals.
(resume): Adjust to use thread_has_single_step_breakpoints_set and
delete_single_step_breakpoints.
(init_wait_for_inferior): Remove references to removed globals.
(delete_thread_infrun_breakpoints): Delete the thread's
single-step breakpoints too.
(delete_just_stopped_threads_infrun_breakpoints): Don't delete
single-step breakpoints here.
(delete_stopped_threads_single_step_breakpoints): New function.
(adjust_pc_after_break): Adjust to use
thread_has_single_step_breakpoints_set.
(handle_inferior_event): Remove references to removed globals.
Use delete_stopped_threads_single_step_breakpoints.
(handle_signal_stop): Adjust to per-thread single-step
breakpoints. Swap test order to do cheaper tests first.
(switch_back_to_stepped_thread): Extend debug output. Remove
references to removed globals.
* record-full.c (record_full_wait_1): Adjust to per-thread
single-step breakpoints.
* thread.c (delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New functions.
(clear_thread_inferior_resources): Also delete the thread's
single-step breakpoints.
|
|
There are no users of deprecated_{insert,remove}_raw_breakpoint left.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (regular_breakpoint_inserted_here_p): Inline ...
(breakpoint_inserted_here_p): ... here. Remove special case for
software single-step breakpoints.
(find_non_raw_software_breakpoint_inserted_here): Inline ...
(software_breakpoint_inserted_here_p): ... here. Remove special
case for software single-step breakpoints.
(bp_target_info_copy_insertion_state)
(deprecated_insert_raw_breakpoint)
(deprecated_remove_raw_breakpoint): Delete functions.
* breakpoint.h (deprecated_insert_raw_breakpoint)
(deprecated_remove_raw_breakpoint): Remove declarations.
|
|
This patch makes single-step breakpoints "real" breakpoints on the
global location list.
There are several benefits to this:
- It removes the currently limitation that only 2 single-step
breakpoints can be inserted. See an example here of a discussion
around a case that wants more than 2, possibly unbounded:
https://sourceware.org/ml/gdb-patches/2014-03/msg00663.html
- makes software single-step work on read-only code regions.
The logic to convert a software breakpoint to a hardware breakpoint
if the memory map says the breakpoint address is in read only memory
is in insert_bp_location. Because software single-step breakpoints
bypass all that go and straight to target_insert_breakpoint, we
can't software single-step over read only memory. This patch
removes that limitation, and adds a test that makes sure that works,
by forcing a code region to read-only with "mem LOW HIGH ro" and
then stepping through that.
- Fixes PR breakpoints/9649
This is an assertion failure in insert_single_step_breakpoint in
breakpoint.c, because we may leave stale single-step breakpoints
behind on error.
The tests for stepping through read-only regions exercise the root
cause of the bug, which is that we leave single-step breakpoints
behind if we fail to insert any single-step breakpoint. Deleting
the single-step breakpoints in resume_cleanups,
delete_just_stopped_threads_infrun_breakpoints, and
fetch_inferior_event fixes this. Without that, we'd no longer hit
the assertion, as that code is deleted, but we'd instead run into
errors/warnings trying to insert/remove the stale breakpoints on
next resume.
- Paves the way to have multiple threads software single-stepping at
the same time, leaving update_global_location_list to worry about
duplicate locations.
- Makes the moribund location machinery aware of software single-step
breakpoints, paving the way to enable software single-step on
non-stop, instead of forcing serialized displaced stepping for all
single steps.
- It's generaly cleaner.
We no longer have to play games with single-step breakpoints
inserted at the same address as regular breakpoints, like we
recently had to do for 7.8. See this discussion:
https://sourceware.org/ml/gdb-patches/2014-06/msg00052.html.
Tested on x86_64 Fedora 20, on top of my 'single-step breakpoints on
x86' series.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* breakpoint.c (single_step_breakpoints, single_step_gdbarch):
Delete array globals.
(single_step_breakpoints): New global.
(breakpoint_xfer_memory): Remove special handling for single-step
breakpoints.
(update_breakpoints_after_exec): Delete bp_single_step
breakpoints.
(detach_breakpoints): Remove special handling for single-step
breakpoints.
(breakpoint_init_inferior): Delete bp_single_step breakpoints.
(bpstat_stop_status): Add comment.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(adjust_breakpoint_address, init_bp_location): Handle
bp_single_step.
(new_single_step_breakpoint): New function.
(set_momentary_breakpoint, bkpt_remove_location): Remove special
handling for single-step breakpoints.
(insert_single_step_breakpoint, single_step_breakpoints_inserted)
(remove_single_step_breakpoints, cancel_single_step_breakpoints):
Rewrite.
(detach_single_step_breakpoints, find_single_step_breakpoint):
Delete functions.
(breakpoint_has_location_inserted_here): New function.
(single_step_breakpoint_inserted_here_p): Rewrite.
* breakpoint.h: Remove FIXME.
(enum bptype) <bp_single_step>: New enum value.
(insert_single_step_breakpoint): Update comment.
* infrun.c (resume_cleanups)
(delete_step_thread_step_resume_breakpoint): Remove single-step
breakpoints.
(fetch_inferior_event): Install a cleanup that removes infrun
breakpoints.
(switch_back_to_stepped_thread) <expect thread advanced also>:
Clear step-over info.
gdb/testsuite/
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
* gdb.base/breakpoint-in-ro-region.exp
(probe_target_hardware_step): New procedure.
(top level): Probe hardware stepping and hardware breakpoint
support. Test stepping through a read-only region, with both
"breakpoint auto-hw" on and off and both "always-inserted" on and
off.
|
|
This change:
commit b775012e845380ed4c7421a1b87caf7bfae39f5f
Author: Luis Machado <luisgpm@br.ibm.com>
Date: Fri Feb 24 15:10:59 2012 +0000
2012-02-24 Luis Machado <lgustavo@codesourcery.com>
* remote.c (remote_supports_cond_breakpoints): New forward
declaration.
[...]
changed the way breakpoints are inserted and removed such that
`insert_bp_location' can now be called with the breakpoint being handled
already in place, while previously the call was only ever made for
breakpoints that have not been put in place. This in turn caused an
issue for software breakpoints and targets for which a breakpoint's
`placed_address' may not be the same as the original requested address.
The issue is `insert_bp_location' overwrites the previously adjusted
value in `placed_address' with the original address, that is only
replaced back with the correct adjusted address later on when
`gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window
where the value in `placed_address' does not correspond to data stored
in `shadow_contents', leading to incorrect instruction bytes being
supplied when `one_breakpoint_xfer_memory' is called to supply the
instruction overlaid by the breakpoint.
And this is exactly what happens on the MIPS target with software
breakpoints placed in microMIPS code. In this case not only
`placed_address' is not the original address because of the ISA bit, but
`mips_breakpoint_from_pc' has to read the original instruction to
determine which one of the two software breakpoint instruction encodings
to choose as well. The 16-bit encoding is used to replace 16-bit
instructions and similarly the 32-bit one is used with 32-bit
instructions, to satisfy branch delay slot size requirements.
The mismatch between `placed_address' and the address data in
`shadow_contents' has been obtained from leads to the wrong encoding
being used in some cases, which in the case of a 32-bit software
breakpoint instruction replacing a 16-bit instruction causes corruption
to the adjacent following instruction and leads the debug session astray
if execution reaches there e.g. with a jump.
To address this problem I made the change below, that adds a
`reqstd_address' field to `struct bp_target_info' and leaves
`placed_address' unchanged once it has been set. This ensures data in
`shadow_contents' is always consistent with `placed_address'.
This approach also has this good side effect that all the places that
examine the breakpoint's address see a consistent value, either
`reqstd_address' or `placed_address', as required. Currently some
places see either the original or the adjusted address in
`placed_address', depending on whether they have been called before
`gdbarch_remote_breakpoint_from_pc' or afterwards. This is in
particular true for subsequent calls to
`gdbarch_remote_breakpoint_from_pc' itself, e.g. from
`one_breakpoint_xfer_memory'. This is also important for places like
`find_single_step_breakpoint' where a breakpoint's address is compared
to the raw value of $pc.
* breakpoint.h (bp_target_info): Add `reqstd_address' member,
update comments.
* breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address'
for the breakpoint's address. Don't preinitialize `placed_size'.
(insert_bp_location): Set `reqstd_address' rather than
`placed_address'.
(bp_target_info_copy_insertion_state): Also copy `placed_address'.
(bkpt_insert_location): Use `reqstd_address' for the breakpoint's
address.
(bkpt_remove_location): Likewise.
(deprecated_insert_raw_breakpoint): Likewise.
(deprecated_remove_raw_breakpoint): Likewise.
(find_single_step_breakpoint): Likewise.
* mem-break.c (default_memory_insert_breakpoint): Use
`reqstd_address' for the breakpoint's address. Don't set
`placed_address' or `placed_size' if breakpoint contents couldn't
have been determined.
* remote.c (remote_insert_breakpoint): Use `reqstd_address' for
the breakpoint's address.
(remote_insert_hw_breakpoint): Likewise. Don't set
`placed_address' or `placed_size' if breakpoint couldn't have been
set.
* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use
`reqstd_address' for the breakpoint's address.
* arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise.
* ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise.
* microblaze-linux-tdep.c
(microblaze_linux_memory_remove_breakpoint): Likewise.
* monitor.c (monitor_insert_breakpoint): Likewise.
* nto-procfs.c (procfs_insert_breakpoint): Likewise.
(procfs_insert_hw_breakpoint): Likewise.
* ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise.
* remote-mips.c (mips_insert_breakpoint): Likewise.
* x86-nat.c (x86_insert_hw_breakpoint): Likewise.
|
|
Commit a25a5a45 (Fix "breakpoint always-inserted off"; remove
"breakpoint always-inserted auto") regressed non-stop remote
debugging.
This was exposed by mi-nsintrall.exp intermittently failing with a
spurious SIGTRAP.
The problem is that when debugging with "target remote", new threads
the target has spawned but have never reported a stop aren't visible
to GDB until it explicitly resyncs its thread list with the target's.
For example, in a program like this:
int
main (void)
{
pthread_t child_thread;
pthread_create (&child_thread, NULL, child_function, NULL);
return 0; <<<< set breakpoint here
}
If the user sets a breakpoint at the "return" statement, and runs the
program, when that breakpoint hit is reported, GDB is only aware of
the main thread. So if we base the decision to remove or insert
breakpoints from the target based on whether all the threads we know
about are stopped, we'll miss that child_thread is running, and thus
we'll remove breakpoints from the target, even through they should
still remain inserted, otherwise child_thread will miss them.
The break-while-running.exp test actually should also be exposing this
thread-list-out-of-synch problem. That test sets a breakpoint while
the main thread is stopped, but other threads are running. Because
other threads are running, the breakpoint is supposed to be inserted
immediately. But, unless something forces a refetch of the thread
list, like, e.g., "info threads", GDB won't be aware of the other
threads that had been spawned by the main thread, and so won't insert
new or old breakpoints in the target. And it turns out that the test
is exactly doing an explicit "info threads", masking out the
problem... This commit adjust the test to exercise the case of not
issuing "info threads". The test then fails without the GDB fix.
In the ni-nsintrall.exp case, what happens is that several threads hit
the same breakpoint, and when the first thread reports the stop,
because GDB wasn't aware other threads exist, all threads known to GDB
are found stopped, so GDB removes the breakpoints from the target.
The other threads follow up with SIGTRAPs too for that same
breakpoint, which has already been removed. For the first few
threads, the moribund breakpoints machinery suppresses the SIGTRAPs,
but after a few events (precisely '3 * thread_count () + 1' at the
time the breakpoint was removed, see update_global_location_list), the
moribund breakpoint machinery is no longer aware of the removed
breakpoint, and the SIGTRAP is reported as a spurious stop.
The fix is naturally then to stop assuming that if no thread in the
list is executing, then the target is fully stopped. We can't know
that until we fully sync the thread list. Because updating the thread
list on every stop would be too much RSP traffic, I chose instead to
update it whenever we're about to present a stop to the user.
Actually updating the thread list at that point happens to be an item
I had added to the local/remote parity wiki page a while ago:
Native GNU/Linux debugging adds new threads to the thread list as
the program creates them "The [New Thread foo] messages". Remote
debugging can't do that, and it's arguable whether we shouldn't even
stop native debugging from doing that, as it hinders inferior
performance. However, a related issue is that with remote targets
(and gdbserver), even after the program stops, the user still needs
to do "info threads" to pull an updated thread list. This, should
most likely be addressed, so that GDB pulls the list itself, perhaps
just before presenting a stop to the user.
With that in place, the need to delay "Program received signal FOO"
was actually caught by the manythreads.exp test. Without that bit, I
was getting:
[Thread 0x7ffff7f13700 (LWP 4499) exited]
[New Thread 0x7ffff7f0b700 (LWP 4500)]
^C
Program received signal SIGINT, Interrupt.
[New Thread 0x7ffff7f03700 (LWP 4501)] <<< new output
[Switching to Thread 0x7ffff7f0b700 (LWP 4500)]
__GI___nptl_death_event () at events.c:31
31 {
(gdb) FAIL: gdb.threads/manythreads.exp: stop threads 1
That is, I was now getting "New Thread" lines after the "Program
received signal" line, and the test doesn't expect them. As the
number of new threads discovered before and after the "Program
received signal" output is unbounded, it's much nicer to defer
"Program received signal" until after synching the thread list, thus
close to the "switching to thread" output and "current frame/source"
info:
[Thread 0x7ffff7863700 (LWP 7647) exited]
^C[New Thread 0x7ffff786b700 (LWP 7648)]
Program received signal SIGINT, Interrupt.
[Switching to Thread 0x7ffff7fc4740 (LWP 6243)]
__GI___nptl_create_event () at events.c:25
25 {
(gdb) PASS: gdb.threads/manythreads.exp: stop threads 1
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-02 Pedro Alves <palves@redhat.com>
* breakpoint.c (breakpoints_should_be_inserted_now): Use
threads_are_executing.
* breakpoint.h (breakpoints_should_be_inserted_now): Add
describing comment.
* gdbthread.h (threads_are_executing): Declare.
(handle_signal_stop) <random signals>: Don't print about the
signal here if stopping.
(end_stepping_range): Don't notify observers here.
(normal_stop): Update the thread list. If stopped by a random
signal or a stepping range ended, notify observers.
* thread.c (threads_executing): New global.
(init_thread_list): Clear 'threads_executing'.
(set_executing): Set or clear 'threads_executing'.
(threads_are_executing): New function.
(update_threads_executing): New function.
(update_thread_list): Use it.
gdb/testsuite/
2014-10-02 Pedro Alves <palves@redhat.com>
* gdb.threads/break-while-running.exp (test): Add new
'update_thread_list' argument. Skip "info threads" if false.
(top level): Add new 'update_thread_list' axis.
|
|
By default, GDB removes all breakpoints from the target when the
target stops and the prompt is given back to the user. This is useful
in case GDB crashes while the user is interacting, as otherwise,
there's a higher chance breakpoints would be left planted on the
target.
But, as long as any thread is running free, we need to make sure to
keep breakpoints inserted, lest a thread misses a breakpoint. With
that in mind, in preparation for non-stop mode, we added a "breakpoint
always-inserted on" mode. This traded off the extra crash protection
for never having threads miss breakpoints, and in addition is more
efficient if there's a ton of breakpoints to remove/insert at each
user command (e.g., at each "step").
When we added non-stop mode, and for a period, we required users to
manually set "always-inserted on" when they enabled non-stop mode, as
otherwise GDB removes all breakpoints from the target as soon as any
thread stops, which means the other threads still running will miss
breakpoints. The test added by this patch exercises this.
That soon revealed a nuisance, and so later we added an extra
"breakpoint always-inserted auto" mode, that made GDB behave like
"always-inserted on" when non-stop was enabled, and "always-inserted
off" when non-stop was disabled. "auto" was made the default at the
same time.
In hindsight, this "auto" setting was unnecessary, and not the ideal
solution. Non-stop mode does depends on breakpoints always-inserted
mode, but only as long as any thread is running. If no thread is
running, no breakpoint can be missed. The same is true for all-stop
too. E.g., if, in all-stop mode, and the user does:
(gdb) c&
(gdb) b foo
That breakpoint at "foo" should be inserted immediately, but it
currently isn't -- currently it'll end up inserted only if the target
happens to trip on some event, and is re-resumed, e.g., an internal
breakpoint triggers that doesn't cause a user-visible stop, and so we
end up in keep_going calling insert_breakpoints. The test added by
this patch also covers this.
IOW, no matter whether in non-stop or all-stop, if the target fully
stops, we can remove breakpoints. And no matter whether in all-stop
or non-stop, if any thread is running in the target, then we need
breakpoints to be immediately inserted. And then, if the target has
global breakpoints, we need to keep breakpoints even when the target
is stopped.
So with that in mind, and aiming at reducing all-stop vs non-stop
differences for all-stop-on-stop-of-non-stop, this patch fixes
"breakpoint always-inserted off" to not remove breakpoints from the
target until it fully stops, and then removes the "auto" setting as
unnecessary. I propose removing it straight away rather than keeping
it as an alias, unless someone complains they have scripts that need
it and that can't adjust.
Tested on x86_64 Fedora 20.
gdb/
2014-09-22 Pedro Alves <palves@redhat.com>
* NEWS: Mention merge of "breakpoint always-inserted" modes "off"
and "auto" merged.
* breakpoint.c (enum ugll_insert_mode): New enum.
(always_inserted_mode): Now a plain boolean.
(show_always_inserted_mode): No longer handle AUTO_BOOLEAN_AUTO.
(breakpoints_always_inserted_mode): Delete.
(breakpoints_should_be_inserted_now): New function.
(insert_breakpoints): Pass UGLL_INSERT to
update_global_location_list instead of calling
insert_breakpoint_locations manually.
(create_solib_event_breakpoint_1): New, factored out from ...
(create_solib_event_breakpoint): ... this.
(create_and_insert_solib_event_breakpoint): Use
create_solib_event_breakpoint_1 instead of calling
insert_breakpoint_locations manually.
(update_global_location_list): Change parameter type from boolean
to enum ugll_insert_mode. All callers adjusted. Adjust to use
breakpoints_should_be_inserted_now and handle UGLL_INSERT.
(update_global_location_list_nothrow): Change parameter type from
boolean to enum ugll_insert_mode.
(_initialize_breakpoint): "breakpoint always-inserted" option is
now a boolean command. Update help text.
* breakpoint.h (breakpoints_always_inserted_mode): Delete declaration.
(breakpoints_should_be_inserted_now): New declaration.
* infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>:
Remove breakpoints_always_inserted_mode check.
(normal_stop): Adjust to use breakpoints_should_be_inserted_now.
* remote.c (remote_start_remote): Likewise.
gdb/doc/
2014-09-22 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Set Breaks): Document that "set breakpoint
always-inserted off" is the default mode now. Delete
documentation of "set breakpoint always-inserted auto".
gdb/testsuite/
2014-09-22 Pedro Alves <palves@redhat.com>
* gdb.threads/break-while-running.exp: New file.
* gdb.threads/break-while-running.c: New file.
|
|
PR 12526 reports that -location watchpoints against bitfield arguments
trigger false positives when bits around the bitfield, but not the
bitfield itself, are modified.
This happens because -location watchpoints naturally operate at the
byte level, not at the bit level. When the address of a bitfield
lvalue is taken, information about the bitfield (i.e. its offset and
size) is lost in the process.
This information must first be retained throughout the lifetime of the
-location watchpoint. This patch achieves this by adding two new
fields to the watchpoint struct: val_bitpos and val_bitsize. These
fields are set when a watchpoint is first defined in watch_command_1.
They are both equal to zero if the watchpoint is not a -location
watchpoint or if the argument is not a bitfield.
Then these bitfield parameters are used inside update_watchpoint and
watchpoint_check to extract the actual value of the bitfield from the
watchpoint address, with the help of a local helper function
extract_bitfield_from_watchpoint_value.
Finally when creating a HW breakpoint pointing to a bitfield, we
optimize the address and length of the breakpoint. By skipping over
the bytes that don't cover the bitfield, this step reduces the
frequency at which a read watchpoint for the bitfield is triggered.
It also reduces the number of times a false-positive call to
check_watchpoint is triggered for a write watchpoint.
gdb/
PR breakpoints/12526
* breakpoint.h (struct watchpoint): New fields val_bitpos and
val_bitsize.
* breakpoint.c (watch_command_1): Use these fields to retain
bitfield information.
(extract_bitfield_from_watchpoint_value): New function.
(watchpoint_check): Use it.
(update_watchpoint): Use it. Optimize the address and length of a
HW watchpoint pointing to a bitfield.
* value.h (unpack_value_bitfield): New prototype.
* value.c (unpack_value_bitfield): Make extern.
gdb/testsuite/
PR breakpoints/12526
* gdb.base/watch-bitfields.exp: New file.
* gdb.base/watch-bitfields.c: New file.
|
|
The IRIX support wants to set a breakpoint to be hit when the startup
phase is complete, which is where shared libraries have been mapped
in. AFAIU, for most IRIX ports, that location is the entry point.
For MIPS IRIX however, GDB needs to set a breakpoint earlier, in
__dbx_link, as explained by:
#ifdef SYS_syssgi
/* On mips-irix, we need to stop the inferior early enough during
the startup phase in order to be able to load the shared library
symbols and insert the breakpoints that are located in these shared
libraries. Stopping at the program entry point is not good enough
because the -init code is executed before the execution reaches
that point.
So what we need to do is to insert a breakpoint in the runtime
loader (rld), more precisely in __dbx_link(). This procedure is
called by rld once all shared libraries have been mapped, but before
the -init code is executed. Unfortuantely, this is not straightforward,
as rld is not part of the executable we are running, and thus we need
the inferior to run until rld itself has been mapped in memory.
For this, we trace all syssgi() syscall exit events. Each time
we detect such an event, we iterate over each text memory maps,
get its associated fd, and scan the symbol table for __dbx_link().
When found, we know that rld has been mapped, and that we can insert
the breakpoint at the symbol address. Once the dbx_link() breakpoint
has been inserted, the syssgi() notifications are no longer necessary,
so they should be canceled. */
proc_trace_syscalls_1 (pi, SYS_syssgi, PR_SYSEXIT, FLAG_SET, 0);
#endif
The loop in irix_solib_create_inferior_hook then runs until whichever
breakpoint is hit first, the one set by solib-irix.c or the one set by
procfs.c.
Note the comment in disable_break talks about __dbx_init, but I think
that's a typo for __dbx_link:
- /* Note that it is possible that we have stopped at a location that
- is different from the location where we inserted our breakpoint.
- On mips-irix, we can actually land in __dbx_init(), so we should
- not check the PC against our breakpoint address here. See procfs.c
- for more details. */
This looks very much like referring to the loop in
irix_solib_create_inferior_hook stopping at __dbx_link instead of at
the entry point.
What this patch does is convert these deprecated raw breakpoints to
standard solib_event breakpoints. When the first solib-event
breakpoint is hit, we delete all solib-event breakpoints. We do that
in the so_ops->handle_event hook.
This allows getting rid of the loop in irix_solib_create_inferior_hook
completely, which should allow properly handling signals and other
events in the early startup phase, like in SVR4.
Built on x86_64 Fedora 20 with --enable-targets=all (builds
solib-irix.c).
Joel tested that with an earlier version of this patch "info shared"
after starting a program gave the same list of shared libraries as
before.
gdb/ChangeLog:
2014-09-12 Pedro Alves <palves@redhat.com>
* breakpoint.c (remove_solib_event_breakpoints_at_next_stop)
(create_and_insert_solib_event_breakpoint): New functions.
* breakpoint.h (create_and_insert_solib_event_breakpoint)
(remove_solib_event_breakpoints_at_next_stop): New declarations.
* procfs.c (dbx_link_bpt_addr, dbx_link_bpt): Delete globals.
(remove_dbx_link_breakpoint): Delete function.
(insert_dbx_link_bpt_in_file): Use
create_and_insert_solib_event_breakpoint instead of
deprecated_insert_raw_breakpoint.
(procfs_wait): Don't check whether we hit __dbx_link here.
(procfs_mourn_inferior): Don't delete the __dbx_link breakpoint
here.
* solib-irix.c (base_breakpoint): Delete global.
(disable_break): Delete function.
(enable_break): Use create_solib_event_breakpoint
instead of deprecated_insert_raw_breakpoint.
(irix_solib_handle_event): New function.
(irix_solib_create_inferior_hook): Don't run the target or disable
the mapping-complete breakpoint here.
(_initialize_irix_solib): Install irix_solib_handle_event as
so_ops->handle_event hook.
|
|
This patch changes a few more spots to use either cmd_sfunc_ftype or
cmd_cfunc_ftype, as appropriate. This is a bit cleaner.
Tested by rebuilding.
2014-07-01 Tom Tromey <tromey@redhat.com>
* breakpoint.c (add_catch_command): Use cmd_sfunc_ftype.
* breakpoint.h (add_catch_command): Use cmd_sfunc_ftype.
* cli/cli-decode.c (cmd_cfunc_eq, add_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, add_info, add_com): Use cmd_cfunc_ftype.
* command.h (cmd_cfunc_ftype): Move earlier.
(add_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, cmd_cfunc_eq)
(add_com, add_info): Use cmd_cfunc_ftype.
|
|
This patch is to add ptid into dummy_frame and extend frame_id to
dummy_frame_id (which has a ptid field). With this change, GDB uses
dummy_frame_id (thread ptid and frame_id) to find the dummy frames.
Currently, dummy frames are looked up by frame_id, which isn't
accurate in non-stop or multi-process mode. The test case
gdb.multi/dummy-frame-restore.exp shows the problem and this patch can
fix it.
Test dummy-frame-restore.exp makes two inferiors stop at
different functions, say, inferior 1 stops at f1 while inferior 2
stops at f2. Set a breakpoint to a function, do the inferior call
in two inferiors, and GDB has two dummy frames of the same frame_id.
When the inferior call is finished, GDB will look up a dummy frame
from its stack/list and restore the inferior's regcache. Two
inferiors are finished in different orders, the inferiors' states are
restored differently, which is wrong. Running dummy-frame-restore.exp
under un-patched GDB, we'll get two fails:
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 2
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 1
With this patch applied, GDB will choose the correct dummy_frame to
restore for a given inferior, because ptid is considered when looking up
dummy frames. Two fails above are fixed.
Regression tested on x86_64-linux, both native and gdbserver.
gdb:
2014-06-27 Yao Qi <yao@codesourcery.com>
* breakpoint.c (check_longjmp_breakpoint_for_call_dummy):
Change parameter type to 'struct thread_info *'. Caller
updated.
* breakpoint.h (check_longjmp_breakpoint_for_call_dummy):
Update declaration.
* dummy-frame.c (struct dummy_frame_id): New.
(dummy_frame_id_eq): New function.
(struct dummy_frame) <id>: Change its type to 'struct
dummy_frame_id'.
(dummy_frame_push): Add parameter ptid and save it in
dummy_frame_id.
(pop_dummy_frame_bpt): Use ptid of dummy_frame instead of
inferior_ptid.
(pop_dummy_frame): Assert that the ptid of dummy_frame equals
to inferior_ptid.
(lookup_dummy_frame): Change parameter type to 'struct
dummy_frame_id *'. Callers updated. Call dummy_frame_id_eq
instead of frame_id_eq.
(dummy_frame_pop): Add parameter ptid. Callers updated.
Update comments. Compose dummy_frame_id and pass it to
lookup_dummy_frame.
(dummy_frame_discard): Add parameter ptid.
(dummy_frame_sniffer): Compose dummy_frame_id and call
dummy_frame_id_eq instead of frame_id_eq.
(fprint_dummy_frames): Print ptid.
* dummy-frame.h: Remove comments.
(dummy_frame_push): Add ptid in declaration.
(dummy_frame_pop, dummy_frame_discard): Likewise.
gdb/testsuite:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.multi/dummy-frame-restore.exp: New.
* gdb.multi/dummy-frame-restore.c: New.
gdb/doc:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Maintenance Commands): Update the output of
'maint print dummy-frames' command.
|
|
Even with deferred_step_ptid out of the way, GDB can still lose
watchpoints.
If a watchpoint triggers and the PC points to an address where a
thread-specific breakpoint for another thread is set, the thread-hop
code triggers, and we lose the watchpoint:
if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
{
int thread_hop_needed = 0;
struct address_space *aspace =
get_regcache_aspace (get_thread_regcache (ecs->ptid));
/* Check if a regular breakpoint has been hit before checking
for a potential single step breakpoint. Otherwise, GDB will
not see this breakpoint hit when stepping onto breakpoints. */
if (regular_breakpoint_inserted_here_p (aspace, stop_pc))
{
if (!breakpoint_thread_match (aspace, stop_pc, ecs->ptid))
thread_hop_needed = 1;
^^^^^^^^^^^^^^^^^^^^^
}
And on software single-step targets, even without a thread-specific
breakpoint in the way, here in the thread-hop code:
else if (singlestep_breakpoints_inserted_p)
{
...
if (!ptid_equal (singlestep_ptid, ecs->ptid)
&& in_thread_list (singlestep_ptid))
{
/* If the PC of the thread we were trying to single-step
has changed, discard this event (which we were going
to ignore anyway), and pretend we saw that thread
trap. This prevents us continuously moving the
single-step breakpoint forward, one instruction at a
time. If the PC has changed, then the thread we were
trying to single-step has trapped or been signalled,
but the event has not been reported to GDB yet.
There might be some cases where this loses signal
information, if a signal has arrived at exactly the
same time that the PC changed, but this is the best
we can do with the information available. Perhaps we
should arrange to report all events for all threads
when they stop, or to re-poll the remote looking for
this particular thread (i.e. temporarily enable
schedlock). */
CORE_ADDR new_singlestep_pc
= regcache_read_pc (get_thread_regcache (singlestep_ptid));
if (new_singlestep_pc != singlestep_pc)
{
enum gdb_signal stop_signal;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: unexpected thread,"
" but expected thread advanced also\n");
/* The current context still belongs to
singlestep_ptid. Don't swap here, since that's
the context we want to use. Just fudge our
state and continue. */
stop_signal = ecs->event_thread->suspend.stop_signal;
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
ecs->ptid = singlestep_ptid;
ecs->event_thread = find_thread_ptid (ecs->ptid);
ecs->event_thread->suspend.stop_signal = stop_signal;
stop_pc = new_singlestep_pc;
}
else
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: unexpected thread\n");
thread_hop_needed = 1;
stepping_past_singlestep_breakpoint = 1;
saved_singlestep_ptid = singlestep_ptid;
}
}
}
we either end up with thread_hop_needed, ignoring the watchpoint
SIGTRAP, or switch to the stepping thread, again ignoring that the
SIGTRAP could be for some other event.
The new test added by this patch exercises both paths.
So the fix is similar to the deferred_step_ptid fix -- defer the
thread hop to _after_ the SIGTRAP had a change of passing through the
regular bpstat handling. If the wrong thread hits a breakpoint, we'll
just end up with BPSTAT_WHAT_SINGLE, and if nothing causes a stop,
keep_going starts a step-over.
Most of the stepping_past_singlestep_breakpoint mechanism is really
not necessary -- setting the thread to step over a breakpoint with
thread->trap_expected is sufficient to keep all other threads locked.
It's best to still keep the flag in some form though, because when we
get to keep_going, the software single-step breakpoint we need to step
over is already gone -- an optimization done by a follow up patch will
check whether a step-over is still be necessary by looking to see
whether the breakpoint is still there, and would find the thread no
longer needs a step-over, while we still want it.
Special care is still needed to handle the case of PC of the thread we
were trying to single-step having changed, like in the old code. We
can't just keep_going and re-step it, as in that case we can over-step
the thread (if it was already done with the step, but hasn't reported
it yet, we'd ask it to step even further). That's now handled in
switch_back_to_stepped_thread. As bonus, we're now using a technique
that doesn't lose signals, unlike the old code -- we now insert a
breakpoint at PC, and resume, which either reports the breakpoint
immediately, or any pending signal.
Tested on x86_64 Fedora 17, against pristine mainline, and against a
branch that implements software single-step on x86.
gdb/
2014-03-20 Pedro Alves <palves@redhat.com>
* breakpoint.c (single_step_breakpoint_inserted_here_p): Make
extern.
* breakpoint.h (single_step_breakpoint_inserted_here_p): Declare.
* infrun.c (saved_singlestep_ptid)
(stepping_past_singlestep_breakpoint): Delete.
(resume): Remove stepping_past_singlestep_breakpoint handling.
(proceed): Store the prev_pc of the stepping thread too.
(init_wait_for_inferior): Adjust. Clear singlestep_ptid and
singlestep_pc.
(enum infwait_states): Delete infwait_thread_hop_state.
(struct execution_control_state) <hit_singlestep_breakpoint>: New
field.
(handle_inferior_event): Adjust.
(handle_signal_stop): Delete stepping_past_singlestep_breakpoint
handling and the thread-hop code. Before removing single-step
breakpoints, check whether the thread hit a single-step breakpoint
of another thread. If it did, the trap is not a random signal.
(switch_back_to_stepped_thread): If the event thread hit a
single-step breakpoint, unblock it before switching to the
stepping thread. Handle the case of the stepped thread having
advanced already.
(keep_going): Handle the case of the current thread moving past a
single-step breakpoint.
gdb/testsuite/
2014-03-20 Pedro Alves <palves@redhat.com>
* gdb.threads/step-over-trips-on-watchpoint.c: New file.
* gdb.threads/step-over-trips-on-watchpoint.exp: New file.
|
|
Say the program is stopped at a breakpoint, and the user sets a
watchpoint. When the program is next resumed, GDB will first step
over the breakpoint, as explained in the manual:
@value {GDBN} normally ignores breakpoints when it resumes
execution, until at least one instruction has been executed. If it
it did not do this, you would be unable to proceed past a breakpoint
without first disabling the breakpoint. This rule applies whether
or not the breakpoint already existed when your program stopped.
However, GDB currently also removes watchpoints, catchpoints, etc.,
and that means that the first instruction off the breakpoint does not
trigger the watchpoint, catchpoint, etc.
testsuite/gdb.base/watchpoint.exp has a kfail for this.
The PR proposes installing watchpoints only when stepping over a
breakpoint, but that misses catchpoints, etc.
A better fix would instead work from the opposite direction -- remove
only real breakpoints, leaving all other kinds of breakpoints
inserted.
But, going further, it's really a waste to constantly remove/insert
all breakpoints when stepping over a single breakpoint (generating a
pair of RSP z/Z packets for each breakpoint), so the fix goes a step
further and makes GDB remove _only_ the breakpoint being stepped over,
leaving all others installed. This then has the added benefit of
reducing breakpoint-related RSP traffic substancialy when there are
many breakpoints set.
gdb/
2014-03-20 Pedro Alves <palves@redhat.com>
PR breakpoints/7143
* breakpoint.c (should_be_inserted): Don't insert breakpoints that
are being stepped over.
(breakpoint_address_match): Make extern.
* breakpoint.h (breakpoint_address_match): New declaration.
* inferior.h (stepping_past_instruction_at): New declaration.
* infrun.c (struct step_over_info): New type.
(step_over_info): New global.
(set_step_over_info, clear_step_over_info)
(stepping_past_instruction_at): New functions.
(handle_inferior_event): Clear the step-over info when
trap_expected is cleared.
(resume): Remove now stale comment.
(clear_proceed_status): Clear step-over info.
(proceed): Adjust step-over handling to set or clear the step-over
info instead of removing all breakpoints.
(handle_signal_stop): When setting up a thread-hop, don't remove
breakpoints here.
(stop_stepping): Clear step-over info.
(keep_going): Adjust step-over handling to set or clear step-over
info and then always inserting breakpoints, instead of removing
all breakpoints when stepping over one.
gdb/testsuite/
2014-03-20 Pedro Alves <palves@redhat.com>
PR breakpoints/7143
* gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead
of gdb_test_multiple.
* gdb.cp/annota2.exp: Remove kfail for gdb/38.
* gdb.cp/annota3.exp: Remove kfail for gdb/38.
|
|
This patch is to remove parameter optional_p as it is always true,
in order to simplify get_tracepoint_by_number.
'optional_p' was added by this change,
1999-11-18 Tom Tromey <tromey@cygnus.com>
* tracepoint.h (get_tracepoint_by_number): Updated
declaration.
* tracepoint.c (trace_pass_command): Better error message.
Fixed logic when `all' not specified.
(get_tracepoint_by_number): Added `optional_p' argument. Fixed
all callers.
but after this patch,
FYI: remove `static's from cli-utils.c
https://sourceware.org/ml/gdb-patches/2011-03/msg00636.html
'optional_p' passed to get_tracepoint_by_number become always true.
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
* breakpoint.c (get_tracepoint_by_number): Remove argument
optional_p. All callers updated. Adjust comments. Update
output message.
* breakpoint.h (get_tracepoint_by_number): Update declaration.
|
|
This changes the probes to be independent of the program space.
After this, when a probe's address is needed, it is determined by
applying offsets at the point of use.
This introduces a bound_probe object, similar to bound minimal
symbols. Objects of this type are used when it's necessary to pass a
probe and its corresponding objfile.
This removes the backlink from probe to objfile, which was primarily
used to fetch the architecture to use.
This adds a get_probe_address function which calls a probe method to
compute the probe's relocated address. Similarly, it adds an objfile
parameter to the semaphore methods so they can do the relocation
properly as well.
2014-03-03 Tom Tromey <tromey@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use bound probes.
* breakpoint.c (create_longjmp_master_breakpoint): Use
get_probe_address.
(add_location_to_breakpoint, bkpt_probe_insert_location)
(bkpt_probe_remove_location): Update.
* breakpoint.h (struct bp_location) <probe>: Now a bound_probe.
* elfread.c (elf_symfile_relocate_probe): Remove.
(elf_probe_fns): Update.
(insert_exception_resume_breakpoint): Change type of "probe"
parameter to bound_probe.
(check_exception_resume): Update.
* objfiles.c (objfile_relocate1): Don't relocate probes.
* probe.c (bound_probe_s): New typedef.
(parse_probes): Use get_probe_address. Set sal's objfile.
(find_probe_by_pc): Return a bound_probe.
(collect_probes): Return a VEC(bound_probe_s).
(compare_probes): Update.
(gen_ui_out_table_header_info): Change type of "probes"
parameter. Update.
(info_probes_for_ops): Update.
(get_probe_address): New function.
(probe_safe_evaluate_at_pc): Update.
* probe.h (struct probe_ops) <get_probe_address>: New field.
<set_semaphore, clear_semaphore>: Add objfile parameter.
(struct probe) <objfile>: Remove field.
<arch>: New field.
<address>: Update comment.
(struct bound_probe): New.
(find_probe_by_pc): Return a bound_probe.
(get_probe_address): Declare.
* solib-svr4.c (struct probe_and_action) <address>: New field.
(hash_probe_and_action, equal_probe_and_action): Update.
(register_solib_event_probe): Add address parameter.
(solib_event_probe_at): Update.
(svr4_create_probe_breakpoints): Add objfile parameter. Use
get_probe_address.
* stap-probe.c (struct stap_probe) <sem_addr>: Update comment.
(stap_get_probe_address): New function.
(stap_can_evaluate_probe_arguments, compute_probe_arg)
(compile_probe_arg): Update.
(stap_set_semaphore, stap_clear_semaphore): Compute semaphore's
address.
(handle_stap_probe): Don't relocate the probe.
(stap_relocate): Remove.
(stap_gen_info_probes_table_values): Update.
(stap_probe_ops): Remove stap_relocate.
* symfile-debug.c (debug_sym_relocate_probe): Remove.
(debug_sym_probe_fns): Update.
* symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove.
* symtab.c (init_sal): Use memset.
* symtab.h (struct symtab_and_line) <objfile>: New field.
* tracepoint.c (start_tracing, stop_tracing): Update.
|
|
* NEWS: Mention Guile scripting.
* Makefile.in (SUBDIR_GUILE_OBS): New variable.
(SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
(SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
(INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
(CLIBS): Add GUILE_LIBS.
(install-guile): New rule.
(guile.o): New rule.
(scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
(scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
(scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
(scm-math.o, scm-objfile.o, scm-ports.o): New rules.
(scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
(scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
(scm-type.o, scm-utils.o, scm-value.o): New rules.
* configure.ac: New option --with-guile.
* configure: Regenerate.
* config.in: Regenerate.
* auto-load.c: Remove #include "python/python.h". Add #include
"gdb/section-scripts.h".
(source_section_scripts): Handle Guile scripts.
(_initialize_auto_load): Add name of Guile objfile script to
scripts-directory help text.
* breakpoint.c (condition_command): Tweak comment to include Scheme.
* breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
(struct breakpoint): New member scm_bp_object.
* defs.h (enum command_control_type): New value guile_control.
* cli/cli-cmds.c: Remove #include "python/python.h". Add #include
"extension.h".
(show_user): Update comment.
(_initialize_cli_cmds): Update help text for "show user". Update help
text for max-user-call-depth.
* cli/cli-script.c: Remove #include "python/python.h". Add #include
"extension.h".
(multi_line_command_p): Add guile_control.
(print_command_lines): Handle guile_control.
(execute_control_command, recurse_read_control_structure): Ditto.
(process_next_line): Recognize "guile" commands.
* disasm.c (gdb_disassemble_info): Make non-static.
* disasm.h: #include "dis-asm.h".
(struct gdbarch): Add forward decl.
(gdb_disassemble_info): Declare.
* extension.c: #include "guile/guile.h".
(extension_languages): Add guile.
(get_ext_lang_defn): Handle EXT_LANG_GDB.
* extension.h (enum extension_language): New value EXT_LANG_GUILE.
* gdbtypes.c (get_unsigned_type_max): New function.
(get_signed_type_minmax): New function.
* gdbtypes.h (get_unsigned_type_max): Declare.
(get_signed_type_minmax): Declare.
* guile/README: New file.
* guile/guile-internal.h: New file.
* guile/guile.c: New file.
* guile/guile.h: New file.
* guile/scm-arch.c: New file.
* guile/scm-auto-load.c: New file.
* guile/scm-block.c: New file.
* guile/scm-breakpoint.c: New file.
* guile/scm-disasm.c: New file.
* guile/scm-exception.c: New file.
* guile/scm-frame.c: New file.
* guile/scm-gsmob.c: New file.
* guile/scm-iterator.c: New file.
* guile/scm-lazy-string.c: New file.
* guile/scm-math.c: New file.
* guile/scm-objfile.c: New file.
* guile/scm-ports.c: New file.
* guile/scm-pretty-print.c: New file.
* guile/scm-safe-call.c: New file.
* guile/scm-string.c: New file.
* guile/scm-symbol.c: New file.
* guile/scm-symtab.c: New file.
* guile/scm-type.c: New file.
* guile/scm-utils.c: New file.
* guile/scm-value.c: New file.
* guile/lib/gdb.scm: New file.
* guile/lib/gdb/boot.scm: New file.
* guile/lib/gdb/experimental.scm: New file.
* guile/lib/gdb/init.scm: New file.
* guile/lib/gdb/iterator.scm: New file.
* guile/lib/gdb/printing.scm: New file.
* guile/lib/gdb/types.scm: New file.
* data-directory/Makefile.in (GUILE_SRCDIR): New variable.
(VPATH): Add $(GUILE_SRCDIR).
(GUILE_DIR): New variable.
(GUILE_INSTALL_DIR, GUILE_FILES): New variables.
(all): Add stamp-guile dependency.
(stamp-guile): New rule.
(clean-guile, install-guile, uninstall-guile): New rules.
(install-only): Add install-guile dependency.
(uninstall): Add uninstall-guile dependency.
(clean): Add clean-guile dependency.
doc/
* Makefile.in (GDB_DOC_FILES): Add guile.texi.
* gdb.texinfo (Auto-loading): Add set/show auto-load guile-scripts.
(Extending GDB): New menu entries Guile, Multiple Extension Languages.
(Guile docs): Include guile.texi.
(objfile-gdbdotext file): Add objfile-gdb.scm.
(dotdebug_gdb_scripts section): Mention Guile scripts.
(Multiple Extension Languages): New node.
* guile.texi: New file.
testsuite/
* configure.ac (AC_OUTPUT): Add gdb.guile.
* configure: Regenerate.
* lib/gdb-guile.exp: New file.
* lib/gdb.exp (get_target_charset): New function.
* gdb.base/help.exp: Update expected output from "apropos apropos".
* gdb.guile/Makefile.in: New file.
* gdb.guile/guile.exp: New file.
* gdb.guile/scm-arch.c: New file.
* gdb.guile/scm-arch.exp: New file.
* gdb.guile/scm-block.c: New file.
* gdb.guile/scm-block.exp: New file.
* gdb.guile/scm-breakpoint.c: New file.
* gdb.guile/scm-breakpoint.exp: New file.
* gdb.guile/scm-disasm.c: New file.
* gdb.guile/scm-disasm.exp: New file.
* gdb.guile/scm-equal.c: New file.
* gdb.guile/scm-equal.exp: New file.
* gdb.guile/scm-error.exp: New file.
* gdb.guile/scm-error.scm: New file.
* gdb.guile/scm-frame-args.c: New file.
* gdb.guile/scm-frame-args.exp: New file.
* gdb.guile/scm-frame-args.scm: New file.
* gdb.guile/scm-frame-inline.c: New file.
* gdb.guile/scm-frame-inline.exp: New file.
* gdb.guile/scm-frame.c: New file.
* gdb.guile/scm-frame.exp: New file.
* gdb.guile/scm-generics.exp: New file.
* gdb.guile/scm-gsmob.exp: New file.
* gdb.guile/scm-iterator.c: New file.
* gdb.guile/scm-iterator.exp: New file.
* gdb.guile/scm-math.c: New file.
* gdb.guile/scm-math.exp: New file.
* gdb.guile/scm-objfile-script-gdb.in: New file.
* gdb.guile/scm-objfile-script.c: New file.
* gdb.guile/scm-objfile-script.exp: New file.
* gdb.guile/scm-objfile.c: New file.
* gdb.guile/scm-objfile.exp: New file.
* gdb.guile/scm-ports.exp: New file.
* gdb.guile/scm-pretty-print.c: New file.
* gdb.guile/scm-pretty-print.exp: New file.
* gdb.guile/scm-pretty-print.scm: New file.
* gdb.guile/scm-section-script.c: New file.
* gdb.guile/scm-section-script.exp: New file.
* gdb.guile/scm-section-script.scm: New file.
* gdb.guile/scm-symbol.c: New file.
* gdb.guile/scm-symbol.exp: New file.
* gdb.guile/scm-symtab-2.c: New file.
* gdb.guile/scm-symtab.c: New file.
* gdb.guile/scm-symtab.exp: New file.
* gdb.guile/scm-type.c: New file.
* gdb.guile/scm-type.exp: New file.
* gdb.guile/scm-value-cc.cc: New file.
* gdb.guile/scm-value-cc.exp: New file.
* gdb.guile/scm-value.c: New file.
* gdb.guile/scm-value.exp: New file.
* gdb.guile/source2.scm: New file.
* gdb.guile/types-module.cc: New file.
* gdb.guile/types-module.exp: New file.
|
|
|
|
* breakpoint.h (gdbpy_breakpoint_object): Renamed from
breakpoint_object. All uses updated.
* python/python-internal.h (gdbpy_breakpoint_object): Renamed from
breakpoint_object. All uses updated.
* python.c (*): All uses of breakpoint_object updated.
* python.h (*): All uses of breakpoint_object updated.
* python/py-breakpoint.c (*): All uses of breakpoint_object updated.
* python/py-finishbreakpoint.c (*): Ditto.
|
|
After the previous patch, there's actually no breakpoint type that
returns BPSTAT_SIGNAL_HIDE, so we can go back to having
bpstat_explains_signal return a boolean. The signal hiding actually
disappears.
gdb/
2013-11-14 Pedro Alves <palves@redhat.com>
* break-catch-sig.c (signal_catchpoint_explains_signal): Adjust to
return a boolean.
* breakpoint.c (bpstat_explains_signal): Adjust to return a
boolean.
(explains_signal_watchpoint, base_breakpoint_explains_signal):
Adjust to return a boolean.
* breakpoint.h (enum bpstat_signal_value): Delete.
(struct breakpoint_ops) <explains_signal>: New returns a boolean.
(bpstat_explains_signal): Likewise.
* infrun.c (handle_inferior_event) <random signal checks>:
bpstat_explains_signal now returns a boolean - adjust. No longer
consider hiding signals.
|
|
This patch introduces two new GDB/MI commands implementing the equivalent
of the "catch exception" and "catch assert" GDB/CLI commands.
gdb/ChangeLog:
* breakpoint.h (init_ada_exception_breakpoint): Add parameter
"enabled".
* breakpoint.c (init_ada_exception_breakpoint): Add parameter
"enabled". Set B->ENABLE_STATE accordingly.
* ada-lang.h (ada_exception_catchpoint_kind): Move here from
ada-lang.c.
(create_ada_exception_catchpoint): Add declaration.
* ada-lang.c (ada_exception_catchpoint_kind): Move to ada-lang.h.
(create_ada_exception_catchpoint): Make non-static. Add new
parameter "disabled". Use it in call to
init_ada_exception_breakpoint.
(catch_ada_exception_command): Add parameter "enabled" in call
to create_ada_exception_catchpoint.
(catch_assert_command): Likewise.
* mi/mi-cmds.h (mi_cmd_catch_assert, mi_cmd_catch_exception):
Add declarations.
* mi/mi-cmds.c (mi_cmds): Add the "catch-assert" and
"catch-exception" commands.
* mi/mi-cmd-catch.c: Add #include "ada-lang.h".
(mi_cmd_catch_assert, mi_cmd_catch_exception): New functions.
|
|
* breakpoint.h: Include break-common.h.
(enum target_hw_bp_type): Move to ...
* common/break-common.h: ... here. New.
gdb/gdbserver/
* i386-low.c: Include break-common.h.
(enum target_hw_bp_type): Remove.
|
|
* breakpoint.h (struct breakpoint_ops) <create_breakpoints_sal>:
Remove parameter 'lsal'.
* breakpoint.c (create_breakpoint): Move local variable 'lsal'
to inner block. Caller update.
(base_breakpoint_create_breakpoints_sal): Update.
(bkpt_create_breakpoints_sal): Likewise.
(tracepoint_create_breakpoints_sal): Likewise.
(strace_marker_create_breakpoints_sal): Get 'lsal' from the
element 0 of vector 'canonical->sals'.
|
|
Hui Zhu <hui@codesourcery.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/15075
PR breakpoints/15434
* breakpoint.c (bpstat_stop_status): Call
b->ops->after_condition_true.
(update_dprintf_command_list): Don't append "continue" command
to the command list of dprintf breakpoint.
(base_breakpoint_after_condition_true): New function.
(base_breakpoint_ops): Add base_breakpoint_after_condition_true.
(dprintf_after_condition_true): New function.
(initialize_breakpoint_ops): Set dprintf_after_condition_true.
* breakpoint.h (breakpoint_ops): Add after_condition_true.
2013-06-25 Yao Qi <yao@codesourcery.com>
Hui Zhu <hui@codesourcery.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/15075
PR breakpoints/15434
* gdb.base/dprintf-next.c: New file.
* gdb.base/dprintf-next.exp: New file.
* gdb.base/dprintf-non-stop.c: New file.
* gdb.base/dprintf-non-stop.exp: New file.
* gdb.base/dprintf.exp: Don't check "continue" in the output
of "info breakpoints".
* gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify):
Don't check "continue" in script field.
|
|
This fixes PR cli/15603.
The bug here is that when a software watchpoint is being used, gdb
will stop responding to C-c. This is a regression caused by the
"catch signal" patch.
The problem is that software watchpoints always end up on the bpstat
list. However, this makes bpstat_explains_signal return
BPSTAT_SIGNAL_HIDE, causing infrun to think that the signal is not a
"random signal".
The fix is to change bpstat_explains_signal to handle this better. I
chose to do it in a "clean API" way, by passing the signal value to
bpstat_explains_signal and then adding an explains_signal method for
watchpoints, which handles the specifics.
Built and regtested on x86-64 Fedora 18.
New test case included.
* break-catch-sig.c (signal_catchpoint_explains_signal): Add 'sig'
argument.
* breakpoint.c (bpstat_explains_signal): Add 'sig' argument.
Special case signals other than GDB_SIGNAL_TRAP.
(explains_signal_watchpoint): New function.
(base_breakpoint_explains_signal): Add 'sig' argument.
(initialize_breakpoint_ops): Set 'explains_signal' method for
watchpoints.
* breakpoint.h (struct breakpoint_ops) <explains_signal>: Add
signal argument.
(bpstat_explains_signal): Likewise.
* infrun.c (handle_syscall_event, handle_inferior_event): Update.
* gdb.base/random-signal.c: New file.
* gdb.base/random-signal.exp: New file.
|
|
* breakpoint.h (handle_solib_event): Moved function declaration
to solib.h.
* breakpoint.c (handle_solib_event): Moved function to solib.c.
(bpstat_stop_status): Pass new argument to handle_solib_event.
* solib.h (update_solib_breakpoints): New function declaration.
(handle_solib_event): Moved function declaration from
breakpoint.h.
* solib.c (update_solib_breakpoints): New function.
(handle_solib_event): Moved function from breakpoint.c.
Updated to call solib_ops->handle_event if not NULL.
* solist.h (target_so_ops): New fields "update_breakpoints" and
"handle_event".
* infrun.c (set_stop_on_solib_events): New function.
(_initialize_infrun): Use the above for "set
stop-on-solib-events".
(handle_inferior_event): Pass new argument to handle_solib_event.
* solib-svr4.c (probe.h): New include.
(svr4_free_library_list): New forward declaration.
(probe_action): New enum.
(probe_info): New struct.
(probe_info): New static variable.
(NUM_PROBES): New definition.
(svr4_info): New fields "using_xfer", "probes_table" and
"solib_list".
(free_probes_table): New function.
(free_solib_list): New function.
(svr4_pspace_data_cleanup): Free probes table and solib list.
(svr4_copy_library_list): New function.
(svr4_current_sos_via_xfer_libraries): New parameter "annex".
(svr4_read_so_list): New parameter "prev_lm".
(svr4_current_sos_direct): Renamed from "svr4_current_sos".
(svr4_current_sos): New function.
(probe_and_action): New struct.
(hash_probe_and_action): New function.
(equal_probe_and_action): Likewise.
(register_solib_event_probe): Likewise.
(solib_event_probe_at): Likewise.
(solib_event_probe_action): Likewise.
(solist_update_full): Likewise.
(solist_update_incremental): Likewise.
(disable_probes_interface_cleanup): Likewise.
(svr4_handle_solib_event): Likewise.
(svr4_update_solib_event_breakpoint): Likewise.
(svr4_update_solib_event_breakpoints): Likewise.
(svr4_create_solib_event_breakpoints): Likewise.
(enable_break): Free probes table before creating breakpoints.
Use svr4_create_solib_event_breakpoints to create breakpoints.
(svr4_solib_create_inferior_hook): Free the solib list.
(_initialize_svr4_solib): Initialise
svr4_so_ops.handle_solib_event and svr4_so_ops.update_breakpoints.
|
