| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The new_objfile observer is currently used to indicate both when a new
objfile is added to program space (when passed non-nullptr) and when all
objfiles of a program space were just removed (when passed nullptr).
I think this is confusing (and Andrew apparently thinks so too [1]).
Add a new "all_objfiles_removed" observer to remove the second role from
"new_objfile".
Some existing users of new_objfile do nothing if the passed objfile is
nullptr. For them, we can simply drop the nullptr check. For others,
add a new all_objfiles_removed callback, and refactor things a bit to
keep the existing behavior as much as possible.
Some callbacks relied on current_program_space, and following
the refactoring now use either objfile->pspace or the pspace passed to
all_objfiles_removed. I think this should be relatively safe, and in
general a step in the right direction.
On the notify side, I found only one call site to change from
new_objfile to all_objfiles_removed, in clear_symtab_users. It is not
entirely clear to me that this is entirely correct. clear_symtab_users
appears to be called in spots that don't remove all objfiles
(functions finish_new_objfile, remove_symbol_file_command, reread_symbols,
do_module_cleanups). But I think that this patch at least makes the
current code clearer.
[1] https://gitlab.com/gnutools/binutils-gdb/-/commit/a0a031bce0527b1521788b5dad640e7883b3a252
Change-Id: Icb648f72862e056267f30f44dd439bd4ec766f13
Approved-By: Tom Tromey <tom@tromey.com>
|
|
Make the current_program_space references bubble up a bit.
Change-Id: Id047a48cc8d8a45504cdbb5960bafe3e7735d652
Approved-By: Tom Tromey <tom@tromey.com>
|
|
Use objfile->pspace instead of current_program_space in two spots.
Change-Id: Idf94fad486252d1250380f295e71b0fe76dce76c
Approved-By: Tom Tromey <tom@tromey.com>
|
|
This reverts commit 02601231fdd91a7bd4837ce202906ea2ce661489.
This commit was a refactoring to remove an xrealloc and simplify
utils.[ch]. However, it has a flaw -- it mishandles a substitution
like "$datadir/subdir".
I am backing out the patch in the interests of fixing the regression
before GDB 14. It can be reinstated (with modifications) later if we
like.
Regression tested on x86-64 Fedora 36.
|
|
This simplifies auto_load_expand_dir_vars to first split the string,
then do any needed substitutions. This was suggested by Simon, and is
much simpler than the current approach.
Then this patch also removes substitute_path_component, as it is no
longer called. This is nice because it helps with the long term goal
of removing utils.h.
Regression tested on x86-64 Fedora 36.
|
|
The crc calculated is 32 bits. Replace uses of unsigned long with
uint32_t. Also use bfd_byte* for buffers.
bfd/
* opncls.c (bfd_calc_gnu_debuglink_crc32): Use stdint types.
(bfd_get_debug_link_info_1, bfd_get_debug_link_info): Likewise.
(separate_debug_file_exists, bfd_follow_gnu_debuglink): Likewise.
(bfd_fill_in_gnu_debuglink_section): Likewise.
* bfd-in2.h: Regenerate.
gdb/
* auto-load.c (auto_load_objfile_script): Update type of
bfd_get_debug_link_info argument.
* symfile.c (find_separate_debug_file_by_debuglink): Likewise.
* gdb_bfd.c (get_file_crc): Update type of
bfd_calc_gnu_debuglink_crc32 argument.
|
|
Replace spaces with tabs in a bunch of places.
Change-Id: If0f87180f1d13028dc178e5a8af7882a067868b0
|
|
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
|
|
This changes struct objfile to use a gdb_bfd_ref_ptr. In addition to
removing some manual memory management, this fixes a use-after-free
that was introduced by the registry rewrite series. The issue there
was that, in some cases, registry shutdown could refer to memory that
had already been freed. This help fix the bug by delaying the
destruction of the BFD reference (and thus the per-bfd object) until
after the registry has been shut down.
|
|
This rewrites registry.h, removing all the macros and replacing it
with relatively ordinary template classes. The result is less code
than the previous setup. It replaces large macros with a relatively
straightforward C++ class, and now manages its own cleanup.
The existing type-safe "key" class is replaced with the equivalent
template class. This approach ended up requiring relatively few
changes to the users of the registry code in gdb -- code using the key
system just required a small change to the key's declaration.
All existing users of the old C-like API are now converted to use the
type-safe API. This mostly involved changing explicit deletion
functions to be an operator() in a deleter class.
The old "save/free" two-phase process is removed, and replaced with a
single "free" phase. No existing code used both phases.
The old "free" callbacks took a parameter for the enclosing container
object. However, this wasn't truly needed and is removed here as
well.
|
|
In our AMDGPU downstream port, we use styling in some logging output.
We noticed it stopped working after the gdb_printf changes. Making
timestamped_file implement can_emit_style_escape (returning the value of
the stream it wraps) fixes it. To show that it works, modify some
logging statements in auto-load.c to output style filenames. You can
see it in action by setting "set debug auto-load 1" and running a
program. We can incrementally add styling to other debug statements
throughout GDB, as needed.
Change-Id: I78a2fd1e078f80f2263251cf6bc53b3a9de9c17a
|
|
Now that filtered and unfiltered output can be treated identically, we
can unify the printf family of functions. This is done under the name
"gdb_printf". Most of this patch was written by script.
|
|
Remove "auto-load:" from a format string passed to auto_load_debug_printf.
It is unnecessary since this function will prefix the string with "[auto-load]"
when printing it.
|
|
If an auto-load script cannot be found and objfile is a separate
debuginfo whose filename does not match the name found in the parent
file's .gnu_debuglink section, then repeat the search using the
parent's filename where the last component is replaced with the
.gnu_debuglink name.
For example if the parent's filename is "/usr/lib/libxyz.so" and the
name in its .gnu_debuglink section is "libxyz.so.debug", then
if no auto-load script is otherwise found the search will be
repeated with the filename "/usr/lib/libxyz.so.debug".
This helps gdb locate auto-load scripts when debuginfo files do not have
the expected filename, such as when they are aquired from debuginfod.
|
|
I found a few spots where filename styling ought to be applied, but is
not.
|
|
This moves the gdb_regex convenience class to gdbsupport.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
The motivation is to reduce the number of places where unmanaged
pointers are returned from allocation type routines. All of the
callers are updated.
There should be no user visible changes after this commit.
|
|
String-like settings (var_string, var_filename, var_optional_filename,
var_string_noescape) currently take a pointer to a `char *` storage
variable (typically global) that holds the setting's value. I'd like to
"mordernize" this by changing them to use an std::string for storage.
An obvious reason is that string operations on std::string are often
easier to write than with C strings. And they avoid having to do any
manual memory management.
Another interesting reason is that, with `char *`, nullptr and an empty
string often both have the same meaning of "no value". String settings
are initially nullptr (unless initialized otherwise). But when doing
"set foo" (where `foo` is a string setting), the setting now points to
an empty string. For example, solib_search_path is nullptr at startup,
but points to an empty string after doing "set solib-search-path". This
leads to some code that needs to check for both to check for "no value".
Or some code that converts back and forth between NULL and "" when
getting or setting the value. I find this very error-prone, because it
is very easy to forget one or the other. With std::string, we at least
know that the variable is not "NULL". There is only one way of
representing an empty string setting, that is with an empty string.
I was wondering whether the distinction between NULL and "" would be
important for some setting, but it doesn't seem so. If that ever
happens, it would be more C++-y and self-descriptive to use
optional<string> anyway.
Actually, there's one spot where this distinction mattered, it's in
init_history, for the test gdb.base/gdbinit-history.exp. init_history
sets the history filename to the default ".gdb_history" if it sees that
the setting was never set - if history_filename is nullptr. If
history_filename is an empty string, it means the setting was explicitly
cleared, so it leaves it as-is. With the change to std::string, this
distinction doesn't exist anymore. This can be fixed by moving the code
that chooses a good default value for history_filename to
_initialize_top. This is ran before -ex commands are processed, so an
-ex command can then clear that value if needed (what
gdb.base/gdbinit-history.exp tests).
Another small improvement, in my opinion is that we can now easily
give string parameters initial values, by simply initializing the global
variables, instead of xstrdup-ing it in the _initialize function.
In Python and Guile, when registering a string-like parameter, we
allocate (with new) an std::string that is owned by the param_smob (in
Guile) and the parmpy_object (in Python) objects.
This patch started by changing all relevant add_setshow_* commands to
take an `std::string *` instead of a `char **` and fixing everything
that failed to build. That includes of course all string setting
variable and their uses.
string_option_def now uses an std::string also, because there's a
connection between options and settings (see
add_setshow_cmds_for_options).
The add_path function in source.c is really complex and twisted, I'd
rather not try to change it to work on an std::string right now.
Instead, I added an overload that copies the std:string to a `char *`
and back. This means more copying, but this is not used in a hot path
at all, so I think it is acceptable.
Change-Id: I92c50a1bdd8307141cdbacb388248e4e4fc08c93
Co-authored-by: Lancelot SIX <lsix@lancelotsix.com>
|
|
cmd_list_element can contain a pointer to data that can be set and / or
shown. This is achieved with the void* VAR member which points to the
data that can be accessed, while the VAR_TYPE member (of type enum
var_types) indicates how to interpret the data pointed to.
With this pattern, the user of the cmd_list_element needs to know what
is the storage type associated with a given VAR_TYPES in order to do
the proper casting. No automatic safeguard is available to prevent
miss-use of the pointer. Client code typically looks something like:
switch (c->var_type)
{
case var_zuinteger:
unsigned int v = *(unsigned int*) c->var;
...
break;
case var_boolean:
bool v = *(bool *) c->var;
...
break;
...
}
This patch proposes to add an abstraction around the var_types and void*
pointer pair. The abstraction is meant to prevent the user from having
to handle the cast and verify that the data is read or written as a type
that is coherent with the setting's var_type. This is achieved by
introducing the struct setting which exposes a set of templated get /
set member functions. The template parameter is the type of the
variable that holds the referred variable.
Using those accessors allows runtime checks to be inserted in order to
ensure that the data pointed to has the expected type. For example,
instantiating the member functions with bool will yield something
similar to:
const bool &get<bool> () const
{
gdb_assert (m_var_type == var_boolean);
gdb_assert (m_var != nullptr);
return *static_cast<bool *> (m_var);
}
void set<bool> (const bool &var)
{
gdb_assert (m_var_type == var_boolean);
gdb_assert (m_var != nullptr);
*static_cast<bool *> (m_var) = var;
}
Using the new abstraction, our initial example becomes:
switch (c->var_type)
{
case var_zuinteger:
unsigned int v = c->var->get<unsigned int> ();
...
break;
case var_boolean:
bool v = c->var->get<bool> ();
...
break;
...
}
While the call site is still similar, the introduction of runtime checks
help ensure correct usage of the data.
In order to avoid turning the bulk of add_setshow_cmd_full into a
templated function, and following a suggestion from Pedro Alves, a
setting can be constructed from a pre validated type erased reference to
a variable. This is what setting::erased_args is used for.
Introducing an opaque abstraction to describe a setting will also make
it possible to use callbacks to retrieve or set the value of the setting
on the fly instead of pointing to a static chunk of memory. This will
be done added in a later commit.
Given that a cmd_list_element may or may not reference a setting, the
VAR and VAR_TYPES members of the struct are replaced with a
gdb::optional<setting> named VAR.
Few internal function signatures have been modified to take into account
this new abstraction:
-The functions value_from_setting, str_value_from_setting and
get_setshow_command_value_string used to have a 'cmd_list_element *'
parameter but only used it for the VAR and VAR_TYPE member. They now
take a 'const setting &' parameter instead.
- Similarly, the 'void *' and a 'enum var_types' parameters of
pascm_param_value and gdbpy_parameter_value have been replaced with a
'const setting &' parameter.
No user visible change is expected after this patch.
Tested on GNU/Linux x86_64, with no regression noticed.
Co-authored-by: Simon Marchi <simon.marchi@polymtl.ca>
Change-Id: Ie1d08c3ceb8b30b3d7bf1efe036eb8acffcd2f34
|
|
Same idea as the previous patch, but for prefix instead of alias.
gdb/ChangeLog:
* cli/cli-decode.h (cmd_list_element) <is_prefix>: New, use it.
Change-Id: I76a9d2e82fc8d7429904424674d99ce6f9880e2b
|
|
While browsing this code, I found the name "prefixlist" really
confusing. I kept reading it as "list of prefixes". Which it isn't:
it's a list of sub-commands, for a prefix command. I think that
renaming it to "subcommands" would make things clearer.
gdb/ChangeLog:
* Rename "prefixlist" parameters to "subcommands" throughout.
* cli/cli-decode.h (cmd_list_element) <prefixlist>: Rename to...
<subcommands>: ... this.
* cli/cli-decode.c (lookup_cmd_for_prefixlist): Rename to...
(lookup_cmd_with_subcommands): ... this.
Change-Id: I150da10d03052c2420aa5b0dee41f422e2a97928
|
|
Previously, the prefixname field of struct cmd_list_element was manually
set for prefix commands. This seems verbose and error prone as it
required every single call to functions adding prefix commands to
specify the prefix name while the same information can be easily
generated.
Historically, this was not possible as the prefix field was null for
many commands, but this was fixed in commit
3f4d92ebdf7f848b5ccc9e8d8e8514c64fde1183 by Philippe Waroquiers, so
we can rely on the prefix field being set when generating the prefix
name.
This commit also fixes a use after free in this scenario:
* A command gets created via Python (using the gdb.Command class).
The prefix name member is dynamically allocated.
* An alias to the new command is created. The alias's prefixname is set
to point to the prefixname for the original command with a direct
assignment.
* A new command with the same name as the Python command is created.
* The object for the original Python command gets freed and its
prefixname gets freed as well.
* The alias is updated to point to the new command, but its prefixname
is not updated so it keeps pointing to the freed one.
gdb/ChangeLog:
* command.h (add_prefix_cmd): Remove the prefixname argument as
it can now be generated automatically. Update all callers.
(add_basic_prefix_cmd): Ditto.
(add_show_prefix_cmd): Ditto.
(add_prefix_cmd_suppress_notification): Ditto.
(add_abbrev_prefix_cmd): Ditto.
* cli/cli-decode.c (add_prefix_cmd): Ditto.
(add_basic_prefix_cmd): Ditto.
(add_show_prefix_cmd): Ditto.
(add_prefix_cmd_suppress_notification): Ditto.
(add_prefix_cmd_suppress_notification): Ditto.
(add_abbrev_prefix_cmd): Ditto.
* cli/cli-decode.h (struct cmd_list_element): Replace the
prefixname member variable with a method which generates the
prefix name at runtime. Update all code reading the prefix
name to use the method, and remove all code setting it.
* python/py-cmd.c (cmdpy_destroyer): Remove code to free the
prefixname member as it's now a method.
(cmdpy_function): Determine if the command is a prefix by
looking at prefixlist, not prefixname.
|
|
Without any explicit dependencies specified, the observers attached
to the 'gdb::observers::new_objfile' observable are always notified
in the order in which they have been attached.
The new_objfile observer callback to auto-load scripts is attached in
'_initialize_auto_load'.
The new_objfile observer callback that propagates the new_objfile event
to the Python side is attached in 'gdbpy_initialize_inferior', which is
called via '_initialize_python'.
With '_initialize_python' happening before '_initialize_auto_load',
the consequence was that the new_objfile event was emitted on the Python
side before autoloaded scripts had been executed when a new objfile was
loaded.
As a result, trying to access the objfile's pretty printers (defined in
the autoloaded script) from a handler for the Python-side
'new_objfile' event would fail. Those would only be initialized later on
(when the 'auto_load_new_objfile' callback was called).
To make sure that the objfile passed to the Python event handler
is properly initialized (including its 'pretty_printers' member),
make sure that the 'auto_load_new_objfile' observer is notified
before the 'python_new_objfile' one that propagates the event
to the Python side.
To do this, make use of the mechanism to explicitly specify
dependencies between observers (introduced in a preparatory commit).
Add a corresponding testcase that involves a test library with an autoloaded
Python script and a handler for the Python 'new_objfile' event.
(The real world use case where I came across this issue was in an attempt
to extend handling for GDB pretty printers for dynamically loaded
objfiles in the Qt Creator IDE, s. [1] and [2] for more background.)
[1] https://bugreports.qt.io/browse/QTCREATORBUG-25339
[2] https://codereview.qt-project.org/c/qt-creator/qt-creator/+/333857/1
Tested on x86_64-linux (Debian testing).
gdb/ChangeLog:
* gdb/auto-load.c (_initialize_auto_load): 'Specify token
when attaching the 'auto_load_new_objfile' observer, so
other observers can specify it as a dependency.
* gdb/auto-load.h (struct token): Declare
'auto_load_new_objfile_observer_token' as token to be used
for the 'auto_load_new_objfile' observer.
* gdb/python/py-inferior.c (gdbpy_initialize_inferior): Make
'python_new_objfile' observer depend on 'auto_load_new_objfile'
observer, so it gets notified after the latter.
gdb/testsuite/ChangeLog:
* gdb.python/libpy-autoloaded-pretty-printers-in-newobjfile-event.so-gdb.py: New test.
* gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event-lib.cc: New test.
* gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event-lib.h: New test.
* gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event-main.cc: New test.
* gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event.exp: New test.
* gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event.py: New test.
Change-Id: I8275b3f4c3bec32e56dd7892f9a59d89544edf89
|
|
Give a name to each observer, this will help produce more meaningful
debug message.
gdbsupport/ChangeLog:
* observable.h (class observable) <struct observer> <observer>:
Add name parameter.
<name>: New field.
<attach>: Add name parameter, update all callers.
Change-Id: Ie0cc4664925215b8d2b09e026011b7803549fba0
|
|
Function file_is_auto_load_safe was taking a format string and varargs
just to output a debug print. This is probably because that function is
used in linux-thread-db.c and main.c, but debug_auto_load is static in
auto-load.c. I simplified that, making debug_auto_load visible outside
of auto-load.c, and making the callers of file_is_auto_load_safe output
the debug print themselves.
This file uses _() for internationalization of the debug messages. This
is not necessary, as these are mostly messages for GDB developers, and
it's not used in other files anyway. So I removed them.
The rest is pretty much standard.
gdb/ChangeLog:
* auto-load.h (debug_auto_load): Move here.
(auto_load_debug_printf): New.
* auto-load.c: Use auto_load_debug_printf.
(debug_auto_load): Move to header.
* linux-thread-db.c (try_thread_db_load): Use
auto_load_debug_printf.
* main.c (captured_main_1): Likewise.
Change-Id: I468dc2a1d24b7dbf171f55181a11abbfafe70ba1
|
|
I'm trying to enable clang's -Wmissing-variable-declarations warning.
This patch fixes all the obvious spots where we can simply add "static"
(at least, found when building on x86-64 Linux).
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_record_tdep): Make static.
* aarch64-tdep.c (tdesc_aarch64_list, aarch64_prologue_unwind,
aarch64_stub_unwind, aarch64_normal_base, ): Make static.
* arm-linux-tdep.c (arm_prologue_unwind): Make static.
* arm-tdep.c (struct frame_unwind): Make static.
* auto-load.c (auto_load_safe_path_vec): Make static.
* csky-tdep.c (csky_stub_unwind): Make static.
* gdbarch.c (gdbarch_data_registry): Make static.
* gnu-v2-abi.c (gnu_v2_abi_ops): Make static.
* i386-netbsd-tdep.c (i386nbsd_mc_reg_offset): Make static.
* i386-tdep.c (i386_frame_setup_skip_insns,
i386_tramp_chain_in_reg_insns, i386_tramp_chain_on_stack_insns):
Make static.
* infrun.c (observer_mode): Make static.
* linux-nat.c (sigchld_action): Make static.
* linux-thread-db.c (thread_db_list): Make static.
* maint-test-options.c (maintenance_test_options_list):
* mep-tdep.c (mep_csr_registers): Make static.
* mi/mi-cmds.c (struct mi_cmd_stats): Remove struct type name.
(stats): Make static.
* nat/linux-osdata.c (struct osdata_type): Make static.
* ppc-netbsd-tdep.c (ppcnbsd_reg_offsets): Make static.
* progspace.c (last_program_space_num): Make static.
* python/py-param.c (struct parm_constant): Remove struct type
name.
(parm_constants): Make static.
* python/py-record-btrace.c (btpy_list_methods): Make static.
* python/py-record.c (recpy_gap_type): Make static.
* record.c (record_goto_cmdlist): Make static.
* regcache.c (regcache_descr_handle): Make static.
* registry.h (DEFINE_REGISTRY): Make definition static.
* symmisc.c (std_in, std_out, std_err): Make static.
* top.c (previous_saved_command_line): Make static.
* tracepoint.c (trace_user, trace_notes, trace_stop_notes): Make
static.
* unittests/command-def-selftests.c (nr_duplicates,
nr_invalid_prefixcmd, lists): Make static.
* unittests/observable-selftests.c (test_notification): Make
static.
* unittests/optional/assignment/1.cc (counter): Make static.
* unittests/optional/assignment/2.cc (counter): Make static.
* unittests/optional/assignment/3.cc (counter): Make static.
* unittests/optional/assignment/4.cc (counter): Make static.
* unittests/optional/assignment/5.cc (counter): Make static.
* unittests/optional/assignment/6.cc (counter): Make static.
gdbserver/ChangeLog:
* ax.cc (bytecode_address_table): Make static.
* debug.cc (debug_file): Make static.
* linux-low.cc (stopping_threads): Make static.
(step_over_bkpt): Make static.
* linux-x86-low.cc (amd64_emit_ops, i386_emit_ops): Make static.
* tracepoint.cc (stop_tracing_bkpt, flush_trace_buffer_bkpt,
alloced_trace_state_variables, trace_buffer_ctrl,
tracing_start_time, tracing_stop_time, tracing_user_name,
tracing_notes, tracing_stop_note): Make static.
Change-Id: Ic1d8034723b7802502bda23770893be2338ab020
|
|
Bool-ify the return type of maybe_add_script_text and
maybe_add_script_file, the loaded parameter and related things.
gdb/ChangeLog:
* auto-load.c (struct loaded_script) <loaded>: Change to bool.
(maybe_add_script_file): Change return type to bool.
(maybe_add_script_text): Change return type and
loaded parameter to bool.
(source_script_file): Adjust.
(execute_script_contents): Adjust.
Change-Id: I59ab5862796fa7d154721b56e2ff8612ad5d734b
|
|
A previous patch missed those.
gdb/ChangeLog:
* auto-load.c (auto_load_objfile_script_1): Use bool.
(execute_script_contents): Use bool.
Change-Id: I214bf7ed25af36ced375eb3ec5a403ded2fa572e
|
|
Make it and related functions return bool. Move function comments to
header where applicable.
gdb/ChangeLog:
* auto-load.h (auto_load_gdb_scripts_enabled): Return bool, move
comment here.
* auto-load.c (auto_load_gdb_scripts_enabled): Return bool, move
comment to header.
* extension-priv.h (struct extension_language_script_ops)
<auto_load_enabled>: Return bool.
* extension.h (ext_lang_auto_load_enabled): Return bool, move
comment here.
* extension.c (ext_lang_auto_load_enabled): Return bool, move
comment to header.
* guile/guile-header.h (gdbscm_auto_load_enabled): Return bool,
move comment here.
* guile/scm-auto-load.c (gdbscm_auto_load_enabled): Return bool,
move comment to header.
* python/python-header.h (gdbpy_auto_load_enabled): Return bool,
move comment here.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Return bool,
move comment to header.
Change-Id: I657a17d2dab77a36884a137ce9b23a2cc6d53140
|
|
Make it return bool and change the advice_printed to bool as well. Move
doc to header file.
gdb/ChangeLog:
* auto-load.h (file_is_auto_load_safe): Change return type to
bool, move comment here.
* auto-load.c (file_is_auto_load_safe): Change return type and
advice_printed to bool. Move comment to header.
Change-Id: Ia7395e7cea8880377800240833316e4be5251d49
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
This commit effectively changes the default location of the .gdbinit
file, while maintaining backward compatibility.
For non Apple hosts the .gdbinit file will now be looked for in the
following locations:
$XDG_CONFIG_HOME/gdb/gdbinit
$HOME/.config/gdb/gdbinit
$HOME/.gdbinit
On Apple hosts the search order is instead:
$HOME/Library/Preferences/gdb/gdbinit
$HOME/.gdbinit
I've performed an extensive rewrite of the documentation, moving all
information about initialization files and where to find them into a
new @node, text from other areas has been moved into this one
location, and other areas cross-reference to this new @node as much as
possible.
gdb/ChangeLog:
* NEWS: Mention changes to config file search path.
* main.c
gdb/doc/ChangeLog:
* gdb.texinfo (Mode Options): Descriptions of initialization files
has been moved to 'Initialization Files'.
(Startup): Likewise.
(Initialization Files): New node.
(gdb man): Update to mention alternative file paths.
(gdbinit man): Likewise.
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
Assigning the result of STRIP_DRIVE_SPEC to an std::string creates an
unnecessary copy of the string. STRIP_DRIVE_SPEC is defined as:
#define STRIP_DRIVE_SPEC(f) ((f) + 2)
So if it is passed a "const char *", it returns a "const char *". We
could use a "const char *" intermediary variable instead of an
std::string, or (as implemented in this patch) just use it directly in
the concatenation right after.
gdb/ChangeLog:
* auto-load.c (auto_load_objfile_script_1): Don't use
debugfile_holder as temporary variable when stripping drive
letter.
Change-Id: If2ccc7a156b22100754d9cdf6778ac7eeb93da4c
|
|
This changes auto-load.c to use htab_up, rather than manually calling
htab_delete.
gdb/ChangeLog
2020-09-17 Tom Tromey <tom@tromey.com>
* auto-load.c (struct auto_load_pspace_info)
<~auto_load_pspace_info, auto_load_pspace_info>: Remove.
<loaded_script_files, loaded_script_texts>: Change type to
htab_up.
(~auto_load_pspace_info) Remove.
(init_loaded_scripts_info, maybe_add_script_file)
(maybe_add_script_text, auto_load_info_scripts): Update.
|
|
Fixes this testsuite fail on Windows:
FAIL: gdb.base/auto-load.exp: print $script_loaded
Converts the debugfile path from c:/dir/file to /c/dir/file, so it can be
appended to the auto-load path.
gdb/ChangeLog:
2020-07-08 Hannes Domani <ssbssa@yahoo.de>
* auto-load.c (auto_load_objfile_script_1): Convert drive part
of debugfile path on Windows.
gdb/doc/ChangeLog:
2020-07-08 Hannes Domani <ssbssa@yahoo.de>
* gdb.texinfo: Document Windows drive conversion of
'set auto-load scripts-directory'.
|
|
Currently there are many prefix commands that do nothing but call
either help_list or cmd_show_list. I happened to notice that one such
call, for "set print type", used the wrong command list parameter,
causing incorrect output.
Rather than fix this bug in isolation, I decided to eliminate this
possibility by adding two new ways to add prefix commands, which
simply route the call to help_list or cmd_show_list, as appropriate.
This makes it impossible for a mismatch to occur.
In some cases, a bit of output was removed; however, I don't think
this output in general was very useful. It seemed redundant with
what's already printed by help_list. A representative example is this
hunk, removed from ada-lang.c:
- printf_unfiltered (_(\
-"\"set ada\" must be followed by the name of a setting.\n"));
This simplified the CLI style set/show commands quite a bit, and
allowed the deletion of a macro.
This also cleans up some unusual code in windows-tdep.c.
Tested on x86-64 Fedora 30. Note that I have no way to build the
go32-nat.c change.
gdb/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* auto-load.c (show_auto_load_cmd): Remove.
(auto_load_show_cmdlist_get): Use add_show_prefix_cmd.
* arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd.
(maintenance_print_arc_command): Remove.
* tui/tui-win.c (tui_command): Remove.
(tui_get_cmd_list): Use add_basic_prefix_cmd.
* tui/tui-layout.c (tui_layout_command): Remove.
(_initialize_tui_layout): Use add_basic_prefix_cmd.
* python/python.c (user_set_python, user_show_python): Remove.
(_initialize_python): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* guile/guile.c (set_guile_command, show_guile_command): Remove.
(install_gdb_commands): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_guile_command): Remove.
* dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove.
(_initialize_dwarf2_read): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Remove do_set and do_show parameters.
* cli/cli-style.c (set_style, show_style): Remove.
(_initialize_cli_style): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(cli_style_option::add_setshow_commands): Remove do_set and
do_show parameters.
(cli_style_option::add_setshow_commands): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
(STYLE_ADD_SETSHOW_COMMANDS): Remove macro.
(set_style_name): Remove.
* cli/cli-dump.c (dump_command, append_command): Remove.
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Remove.
(_initialize_cli_dump): Use add_basic_prefix_cmd.
* windows-tdep.c (w32_prefix_command_valid): Remove global.
(init_w32_command_list): Remove; move into ...
(_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Remove.
(_initialize_valprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* typeprint.c (set_print_type, show_print_type): Remove.
(_initialize_typeprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record.c (set_record_command, show_record_command): Remove.
(_initialize_record): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_command, show_command, set_debug, show_debug): Remove.
* top.h (set_history, show_history): Don't declare.
* top.c (set_history, show_history): Remove.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Remove.
(_initialize_target_descriptions): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* symtab.c (info_module_command): Remove.
(_initialize_symtab): Use add_basic_prefix_cmd.
* symfile.c (overlay_command): Remove.
(_initialize_symfile): Use add_basic_prefix_cmd.
* sparc64-tdep.c (info_adi_command): Remove.
(_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd.
* sh-tdep.c (show_sh_command, set_sh_command): Remove.
(_initialize_sh_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* serial.c (serial_set_cmd, serial_show_cmd): Remove.
(_initialize_serial): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove.
(_initialize_ser_tcp): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command)
(_initialize_rs6000_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* riscv-tdep.c (show_riscv_command, set_riscv_command)
(show_debug_riscv_command, set_debug_riscv_command): Remove.
(_initialize_riscv_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* remote.c (remote_command, set_remote_cmd): Remove.
(_initialize_remote): Use add_basic_prefix_cmd.
* record-full.c (set_record_full_command)
(show_record_full_command): Remove.
(_initialize_record_full): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record-btrace.c (cmd_set_record_btrace)
(cmd_show_record_btrace, cmd_set_record_btrace_bts)
(cmd_show_record_btrace_bts, cmd_set_record_btrace_pt)
(cmd_show_record_btrace_pt): Remove.
(_initialize_record_btrace): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Remove.
(_initialize_ravenscar): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (show_mips_command, set_mips_command)
(_initialize_mips_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_check_command, maintenance_print_command)
(maintenance_set_cmd, maintenance_show_cmd): Remove.
(_initialize_maint_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_per_command_cmd): Remove.
* maint-test-settings.c (maintenance_set_test_settings_cmd):
Remove.
(maintenance_show_test_settings_cmd): Remove.
(_initialize_maint_test_settings): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint-test-options.c (maintenance_test_options_command):
Remove.
(_initialize_maint_test_options): Use add_basic_prefix_cmd.
* macrocmd.c (macro_command): Remove
(_initialize_macrocmd): Use add_basic_prefix_cmd.
* language.c (set_check, show_check): Remove.
(_initialize_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* infcmd.c (unset_command): Remove.
(_initialize_infcmd): Use add_basic_prefix_cmd.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove.
(_initialize_i386_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* go32-nat.c (go32_info_dos_command): Remove.
(_initialize_go32_nat): Use add_basic_prefix_cmd.
* cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd)
(do_show_prefix_cmd, add_show_prefix_cmd): New functions.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove.
(_initialize_frame): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* dcache.c (set_dcache_command, show_dcache_command): Remove.
(_initialize_dcache): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cp-support.c (maint_cplus_command): Remove.
(_initialize_cp_support): Use add_basic_prefix_cmd.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd, _initialize_btrace): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
* breakpoint.c (save_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd.
* arm-tdep.c (set_arm_command, show_arm_command): Remove.
(_initialize_arm_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd)
(set_ada_command, show_ada_command): Remove.
(_initialize_ada_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare.
gdb/testsuite/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
Update tests.
* gdb.btrace/cpu.exp: Update tests.
* gdb.base/maint.exp: Update tests.
* gdb.base/default.exp: Update tests.
* gdb.base/completion.exp: Update tests.
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This adds more uses of styled_string, changing gdb to style some
output that was previously left unstyled.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* stack.c (print_frame, info_frame_command_core): Use
styled_string.
* linux-thread-db.c (try_thread_db_load_1)
(try_thread_db_load_from_pdir_1): Use styled_string.
* auto-load.c (file_is_auto_load_safe, execute_script_contents)
(auto_load_section_scripts, info_auto_load_local_gdbinit)
(maybe_print_unsupported_script_warning)
(maybe_print_script_not_found_warning): Use styled_string.
* ada-lang.c (user_select_syms): Use styled_string.
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
This is for add_setshow_boolean_cmd as well as the gdb::option interface.
gdb/ChangeLog:
2019-09-17 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_ignore_descriptive_types_p): Change to bool.
(print_signatures): Likewise.
(trust_pad_over_xvs): Likewise.
* arch/aarch64-insn.c (aarch64_debug): Likewise.
* arch/aarch64-insn.h (aarch64_debug): Likewise.
* arm-linux-nat.c (arm_apcs_32): Likewise.
* arm-linux-tdep.c (arm_apcs_32): Likewise.
* arm-nbsd-nat.c (arm_apcs_32): Likewise.
* arm-tdep.c (arm_debug): Likewise.
(arm_apcs_32): Likewise.
* auto-load.c (debug_auto_load): Likewise.
(auto_load_gdb_scripts): Likewise.
(global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* auto-load.h (global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* breakpoint.c (disconnected_dprintf): Likewise.
(breakpoint_proceeded): Likewise.
(automatic_hardware_breakpoints): Likewise.
(always_inserted_mode): Likewise.
(target_exact_watchpoints): Likewise.
(_initialize_breakpoint): Update.
* breakpoint.h (target_exact_watchpoints): Change to bool.
* btrace.c (maint_btrace_pt_skip_pad): Likewise.
* cli/cli-cmds.c (trace_commands): Likewise.
* cli/cli-cmds.h (trace_commands): Likewise.
* cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument
to bool*.
* cli/cli-logging.c (logging_overwrite): Change to bool.
(logging_redirect): Likewise.
(debug_redirect): Likewise.
* cli/cli-option.h (option_def) <boolean>: Change return type to bool*.
(struct boolean_option_def) <get_var_address_cb_>: Change return type
to bool.
<boolean_option_def>: Update.
(struct flag_option_def): Change default type of Context to bool
from int.
<flag_option_def>: Change return type of var_address_cb_ to bool*.
* cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*.
(get_setshow_command_value_string): Likewise.
* cli/cli-style.c (cli_styling): Change to bool.
(source_styling): Likewise.
* cli/cli-style.h (source_styling): Likewise.
(cli_styling): Likewise.
* cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change
to bool.
* command.h (var_types): Update comment.
(add_setshow_boolean_cmd): Change int* var argument to bool*.
* compile/compile-cplus-types.c (debug_compile_cplus_types): Change to
bool.
(debug_compile_cplus_scopes): Likewise.
* compile/compile-internal.h (compile_debug): Likewise.
* compile/compile.c (compile_debug): Likewise.
(struct compile_options) <raw>: Likewise.
* cp-support.c (catch_demangler_crashes): Likewise.
* cris-tdep.c (usr_cmd_cris_version_valid): Likewise.
(usr_cmd_cris_dwarf2_cfi): Likewise.
* csky-tdep.c (csky_debug): Likewise.
* darwin-nat.c (enable_mach_exceptions): Likewise.
* dcache.c (dcache_enabled_p): Likewise.
* defs.h (info_verbose): Likewise.
* demangle.c (demangle): Likewise.
(asm_demangle): Likewise.
* dwarf-index-cache.c (debug_index_cache): Likewise.
* dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2read.c (check_physname): Likewise.
(use_deprecated_index_sections): Likewise.
(dwarf_always_disassemble): Likewise.
* eval.c (overload_resolution): Likewise.
* event-top.c (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* event-top.h (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* exec.c (write_files): Likewise.
* fbsd-nat.c (debug_fbsd_lwp): Likewise
(debug_fbsd_nat): Likewise.
* frame.h (struct frame_print_options) <print_raw_frame_arguments>:
Likewise.
(struct set_backtrace_options) <backtrace_past_main>: Likewise.
<backtrace_past_entry> Likewise.
* gdb-demangle.h (demangle): Likewise.
(asm_demangle): Likewise.
* gdb_bfd.c (bfd_sharing): Likewise.
* gdbcore.h (write_files): Likewise.
* gdbsupport/common-debug.c (show_debug_regs): Likewise.
* gdbsupport/common-debug.h (show_debug_regs): Likewise.
* gdbthread.h (print_thread_events): Likewise.
* gdbtypes.c (opaque_type_resolution): Likewise.
(strict_type_checking): Likewise.
* gnu-nat.c (gnu_debug_flag): Likewise.
* guile/scm-auto-load.c (auto_load_guile_scripts): Likewise.
* guile/scm-param.c (pascm_variable): Add boolval.
(add_setshow_generic): Update.
(pascm_param_value): Update.
(pascm_set_param_value_x): Update.
* hppa-tdep.c (hppa_debug): Change to bool..
* infcall.c (may_call_functions_p): Likewise.
(coerce_float_to_double_p): Likewise.
(unwind_on_signal_p): Likewise.
(unwind_on_terminating_exception_p): Likewise.
* infcmd.c (startup_with_shell): Likewise.
* inferior.c (print_inferior_events): Likewise.
* inferior.h (startup_with_shell): Likewise.
(print_inferior_events): Likewise.
* infrun.c (step_stop_if_no_debug): Likewise.
(detach_fork): Likewise.
(debug_displaced): Likewise.
(disable_randomization): Likewise.
(non_stop): Likewise.
(non_stop_1): Likewise.
(observer_mode): Likewise.
(observer_mode_1): Likewise.
(set_observer_mode): Update.
(sched_multi): Change to bool.
* infrun.h (debug_displaced): Likewise.
(sched_multi): Likewise.
(step_stop_if_no_debug): Likewise.
(non_stop): Likewise.
(disable_randomization): Likewise.
* linux-tdep.c (use_coredump_filter): Likewise.
(dump_excluded_mappings): Likewise.
* linux-thread-db.c (auto_load_thread_db): Likewise.
(check_thread_db_on_load): Likewise.
* main.c (captured_main_1): Update.
* maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt,
xx2_opt, boolean_opt>: Change to bool.
* maint-test-settings.c (maintenance_test_settings_boolean): Likewise.
* maint.c (maintenance_profile_p): Likewise.
(per_command_time): Likewise.
(per_command_space): Likewise.
(per_command_symtab): Likewise.
* memattr.c (inaccessible_by_default): Likewise.
* mi/mi-main.c (mi_async): Likewise.
(mi_async_1): Likewise.
* mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise.
* nat/fork-inferior.h (startup_with_shell): Likewise.
* nat/linux-namespaces.c (debug_linux_namespaces): Likewise.
* nat/linux-namespaces.h (debug_linux_namespaces): Likewise.
* nios2-tdep.c (nios2_debug): Likewise.
* or1k-tdep.c (or1k_debug): Likewise.
* parse.c (parser_debug): Likewise.
* parser-defs.h (parser_debug): Likewise.
* printcmd.c (print_symbol_filename): Likewise.
* proc-api.c (procfs_trace): Likewise.
* python/py-auto-load.c (auto_load_python_scripts): Likewise.
* python/py-param.c (union parmpy_variable): Add "bool boolval" field.
(set_parameter_value): Update.
(add_setshow_generic): Update.
* python/py-value.c (copy_py_bool_obj): Change argument from int*
to bool*.
* python/python.c (gdbpy_parameter_value): Cast to bool* instead of
int*.
* ravenscar-thread.c (ravenscar_task_support): Change to bool.
* record-btrace.c (record_btrace_target::store_registers): Update.
* record-full.c (record_full_memory_query): Change to bool.
(record_full_stop_at_limit): Likewise.
* record-full.h (record_full_memory_query): Likewise.
* remote-notif.c (notif_debug): Likewise.
* remote-notif.h (notif_debug): Likewise.
* remote.c (use_range_stepping): Likewise.
(interrupt_on_connect): Likewise.
(remote_break): Likewise.
* ser-tcp.c (tcp_auto_retry): Likewise.
* ser-unix.c (serial_hwflow): Likewise.
* skip.c (debug_skip): Likewise.
* solib-aix.c (solib_aix_debug): Likewise.
* spu-tdep.c (spu_stop_on_load_p): Likewise.
(spu_auto_flush_cache_p): Likewise.
* stack.c (struct backtrace_cmd_options) <full, no_filters, hide>:
Likewise.
(struct info_print_options) <quiet>: Likewise.
* symfile-debug.c (debug_symfile): Likewise.
* symfile.c (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symfile.h (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symtab.c (basenames_may_differ): Likewise.
(struct filename_partial_match_opts) <dirname, basename>: Likewise.
(struct info_print_options) <quiet, exclude_minsyms>: Likewise.
(struct info_types_options) <quiet>: Likewise.
* symtab.h (demangle): Likewise.
(basenames_may_differ): Likewise.
* target-dcache.c (stack_cache_enabled_1): Likewise.
(code_cache_enabled_1): Likewise.
* target.c (trust_readonly): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
(auto_connect_native_target): Likewise.
(target_stop_and_wait): Update.
(target_async_permitted): Change to bool.
(target_async_permitted_1): Likewise.
(may_write_registers_1): Likewise.
(may_write_memory_1): Likewise.
(may_insert_breakpoints_1): Likewise.
(may_insert_tracepoints_1): Likewise.
(may_insert_fast_tracepoints_1): Likewise.
(may_stop_1): Likewise.
* target.h (target_async_permitted): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
* thread.c (struct info_threads_opts) <show_global_ids>: Likewise.
(make_thread_apply_all_options_def_group): Change argument from int*
to bool*.
(thread_apply_all_command): Update.
(print_thread_events): Change to bool.
* top.c (confirm): Likewise.
(command_editing_p): Likewise.
(history_expansion_p): Likewise.
(write_history_p): Likewise.
(info_verbose): Likewise.
* top.h (confirm): Likewise.
(history_expansion_p): Likewise.
* tracepoint.c (disconnected_tracing): Likewise.
(circular_trace_buffer): Likewise.
* typeprint.c (print_methods): Likewise.
(print_typedefs): Likewise.
* utils.c (debug_timestamp): Likewise.
(sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* utils.h (sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* valops.c (overload_resolution): Likewise.
* valprint.h (struct value_print_options) <prettyformat_arrays,
prettyformat_structs, vtblprint, unionprint, addressprint, objectprint,
stop_print_at_null, print_array_indexes, deref_ref, static_field_print,
pascal_static_field_print, raw, summary, symbol_print, finish_print>:
Likewise.
* windows-nat.c (new_console): Likewise.
(cygwin_exceptions): Likewise.
(new_group): Likewise.
(debug_exec): Likewise.
(debug_events): Likewise.
(debug_memory): Likewise.
(debug_exceptions): Likewise.
(useshell): Likewise.
* windows-tdep.c (maint_display_all_tib): Likewise.
* xml-support.c (debug_xml): Likewise.
|
|
This simplifies memory management. I've also changed some global variables
to std::string accordingly (which store the result of these functions),
but not all because some are used with add_setshow_optional_filename_cmd
which requires a char*.
gdb/ChangeLog:
2019-09-11 Christian Biesinger <cbiesinger@google.com>
* auto-load.c (auto_load_expand_dir_vars): Update.
* defs.h (gdb_datadir): Change to std::string.
(python_libdir): Likewise.
(relocate_gdb_directory): Change return type to std::string.
* guile/guile.c (gdbscm_data_directory): Update.
(initialize_scheme_side): Update.
* jit.c (jit_reader_dir): Change to std::string.
(jit_reader_load_command): Update.
* main.c (gdb_datadir): Change to std::string.
(python_libdir): Likewise.
(set_gdb_data_directory): Update.
(relocate_path): Change to return std::string.
(relocate_gdb_directory): Change to return std::string.
(relocate_gdbinit_path_maybe_in_datadir): Update.
(captured_main_1): Update.
* python/python.c (do_start_initialization): Update.
* top.c (show_gdb_datadir): Update.
* xml-syscall.c (xml_init_syscalls_info): Update.
(init_syscalls_info): Update.
|
|
I noticed that init_cli_cmds only installs a command, and so doesn't
need to be handled specially. This patch merges it into
_initialize_cli_cmds.
The help text is constructed dynamically, which is sometimes an
indication that special treatment is needed; but in this case it is
just to insert the value of "gdbinit", which is created at
compile-time and not modified; so this doesn't affect the result.
This version also removes the "gdbinit" global. There's no need for
it, as GDBINIT can be used instead. Note, though, that the help text
in question must still be dynamically constructed, in order to be
i18n-friendly.
gdb/ChangeLog
2019-07-11 Tom Tromey <tromey@adacore.com>
* main.c (get_init_files): Use GDBINIT, not gdbinit.
* auto-load.c (file_is_auto_load_safe): Use GDBINIT, not gdbinit.
* top.h (gdbinit): Don't declare.
* cli/cli-cmds.c (init_cli_cmds): Remove, merging contents
into...
(_initialize_cli_cmds): ...here. Use GDBINIT, not gdbinit.
* top.c (gdb_init): Don't call init_cli_cmds.
(gdbinit): Remove.
* cli/cli-cmds.h (init_cli_cmds): Don't declare.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
This changes auto-load.c to use the type-safe registry API. It also
changes a couple of types to "bool", removing uses of "FALSE".
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* auto-load.c (struct auto_load_pspace_info): Add destructor and
initializers.
<unsupported_script_warning_printed,
script_not_found_warning_printed>: Now bool.
(auto_load_pspace_data): Change type.
(~auto_load_pspace_info): Rename from
auto_load_pspace_data_cleanup.
(get_auto_load_pspace_data, init_loaded_scripts_info)
(clear_section_scripts, maybe_print_unsupported_script_warning)
(maybe_print_script_not_found_warning, _initialize_auto_load):
Update.
|
|
Andreas Schwab and John Baldwin pointed out some bugs in the header
sorting patch; and I noticed that the output was not correct when
limited to a subset of files (a bug in my script).
So, I'm reverting the patch. I may try again after fixing the issues
pointed out.
gdb/ChangeLog
2019-04-05 Tom Tromey <tom@tromey.com>
Revert the header-sorting patch.
* ft32-tdep.c: Revert.
* frv-tdep.c: Revert.
* frv-linux-tdep.c: Revert.
* frame.c: Revert.
* frame-unwind.c: Revert.
* frame-base.c: Revert.
* fork-child.c: Revert.
* findvar.c: Revert.
* findcmd.c: Revert.
* filesystem.c: Revert.
* filename-seen-cache.h: Revert.
* filename-seen-cache.c: Revert.
* fbsd-tdep.c: Revert.
* fbsd-nat.h: Revert.
* fbsd-nat.c: Revert.
* f-valprint.c: Revert.
* f-typeprint.c: Revert.
* f-lang.c: Revert.
* extension.h: Revert.
* extension.c: Revert.
* extension-priv.h: Revert.
* expprint.c: Revert.
* exec.h: Revert.
* exec.c: Revert.
* exceptions.c: Revert.
* event-top.c: Revert.
* event-loop.c: Revert.
* eval.c: Revert.
* elfread.c: Revert.
* dwarf2read.h: Revert.
* dwarf2read.c: Revert.
* dwarf2loc.c: Revert.
* dwarf2expr.h: Revert.
* dwarf2expr.c: Revert.
* dwarf2-frame.c: Revert.
* dwarf2-frame-tailcall.c: Revert.
* dwarf-index-write.h: Revert.
* dwarf-index-write.c: Revert.
* dwarf-index-common.c: Revert.
* dwarf-index-cache.h: Revert.
* dwarf-index-cache.c: Revert.
* dummy-frame.c: Revert.
* dtrace-probe.c: Revert.
* disasm.h: Revert.
* disasm.c: Revert.
* disasm-selftests.c: Revert.
* dictionary.c: Revert.
* dicos-tdep.c: Revert.
* demangle.c: Revert.
* dcache.h: Revert.
* dcache.c: Revert.
* darwin-nat.h: Revert.
* darwin-nat.c: Revert.
* darwin-nat-info.c: Revert.
* d-valprint.c: Revert.
* d-namespace.c: Revert.
* d-lang.c: Revert.
* ctf.c: Revert.
* csky-tdep.c: Revert.
* csky-linux-tdep.c: Revert.
* cris-tdep.c: Revert.
* cris-linux-tdep.c: Revert.
* cp-valprint.c: Revert.
* cp-support.c: Revert.
* cp-namespace.c: Revert.
* cp-abi.c: Revert.
* corelow.c: Revert.
* corefile.c: Revert.
* continuations.c: Revert.
* completer.h: Revert.
* completer.c: Revert.
* complaints.c: Revert.
* coffread.c: Revert.
* coff-pe-read.c: Revert.
* cli-out.h: Revert.
* cli-out.c: Revert.
* charset.c: Revert.
* c-varobj.c: Revert.
* c-valprint.c: Revert.
* c-typeprint.c: Revert.
* c-lang.c: Revert.
* buildsym.c: Revert.
* buildsym-legacy.c: Revert.
* build-id.h: Revert.
* build-id.c: Revert.
* btrace.c: Revert.
* bsd-uthread.c: Revert.
* breakpoint.h: Revert.
* breakpoint.c: Revert.
* break-catch-throw.c: Revert.
* break-catch-syscall.c: Revert.
* break-catch-sig.c: Revert.
* blockframe.c: Revert.
* block.c: Revert.
* bfin-tdep.c: Revert.
* bfin-linux-tdep.c: Revert.
* bfd-target.c: Revert.
* bcache.c: Revert.
* ax-general.c: Revert.
* ax-gdb.h: Revert.
* ax-gdb.c: Revert.
* avr-tdep.c: Revert.
* auxv.c: Revert.
* auto-load.c: Revert.
* arm-wince-tdep.c: Revert.
* arm-tdep.c: Revert.
* arm-symbian-tdep.c: Revert.
* arm-pikeos-tdep.c: Revert.
* arm-obsd-tdep.c: Revert.
* arm-nbsd-tdep.c: Revert.
* arm-nbsd-nat.c: Revert.
* arm-linux-tdep.c: Revert.
* arm-linux-nat.c: Revert.
* arm-fbsd-tdep.c: Revert.
* arm-fbsd-nat.c: Revert.
* arm-bsd-tdep.c: Revert.
* arch-utils.c: Revert.
* arc-tdep.c: Revert.
* arc-newlib-tdep.c: Revert.
* annotate.h: Revert.
* annotate.c: Revert.
* amd64-windows-tdep.c: Revert.
* amd64-windows-nat.c: Revert.
* amd64-tdep.c: Revert.
* amd64-sol2-tdep.c: Revert.
* amd64-obsd-tdep.c: Revert.
* amd64-obsd-nat.c: Revert.
* amd64-nbsd-tdep.c: Revert.
* amd64-nbsd-nat.c: Revert.
* amd64-nat.c: Revert.
* amd64-linux-tdep.c: Revert.
* amd64-linux-nat.c: Revert.
* amd64-fbsd-tdep.c: Revert.
* amd64-fbsd-nat.c: Revert.
* amd64-dicos-tdep.c: Revert.
* amd64-darwin-tdep.c: Revert.
* amd64-bsd-nat.c: Revert.
* alpha-tdep.c: Revert.
* alpha-obsd-tdep.c: Revert.
* alpha-nbsd-tdep.c: Revert.
* alpha-mdebug-tdep.c: Revert.
* alpha-linux-tdep.c: Revert.
* alpha-linux-nat.c: Revert.
* alpha-bsd-tdep.c: Revert.
* alpha-bsd-nat.c: Revert.
* aix-thread.c: Revert.
* agent.c: Revert.
* addrmap.c: Revert.
* ada-varobj.c: Revert.
* ada-valprint.c: Revert.
* ada-typeprint.c: Revert.
* ada-tasks.c: Revert.
* ada-lang.c: Revert.
* aarch64-tdep.c: Revert.
* aarch64-ravenscar-thread.c: Revert.
* aarch64-newlib-tdep.c: Revert.
* aarch64-linux-tdep.c: Revert.
* aarch64-linux-nat.c: Revert.
* aarch64-fbsd-tdep.c: Revert.
* aarch64-fbsd-nat.c: Revert.
* aarch32-linux-nat.c: Revert.
|
|
This patch sorts the include files for the files [a-f]*.[chyl].
The patch was written by a script.
Tested by the buildbot.
I will follow up with patches to sort the remaining files, by sorting
a subset, testing them, and then checking them in.
gdb/ChangeLog
2019-04-05 Tom Tromey <tom@tromey.com>
* ft32-tdep.c: Sort headers.
* frv-tdep.c: Sort headers.
* frv-linux-tdep.c: Sort headers.
* frame.c: Sort headers.
* frame-unwind.c: Sort headers.
* frame-base.c: Sort headers.
* fork-child.c: Sort headers.
* findvar.c: Sort headers.
* findcmd.c: Sort headers.
* filesystem.c: Sort headers.
* filename-seen-cache.h: Sort headers.
* filename-seen-cache.c: Sort headers.
* fbsd-tdep.c: Sort headers.
* fbsd-nat.h: Sort headers.
* fbsd-nat.c: Sort headers.
* f-valprint.c: Sort headers.
* f-typeprint.c: Sort headers.
* f-lang.c: Sort headers.
* extension.h: Sort headers.
* extension.c: Sort headers.
* extension-priv.h: Sort headers.
* expprint.c: Sort headers.
* exec.h: Sort headers.
* exec.c: Sort headers.
* exceptions.c: Sort headers.
* event-top.c: Sort headers.
* event-loop.c: Sort headers.
* eval.c: Sort headers.
* elfread.c: Sort headers.
* dwarf2read.h: Sort headers.
* dwarf2read.c: Sort headers.
* dwarf2loc.c: Sort headers.
* dwarf2expr.h: Sort headers.
* dwarf2expr.c: Sort headers.
* dwarf2-frame.c: Sort headers.
* dwarf2-frame-tailcall.c: Sort headers.
* dwarf-index-write.h: Sort headers.
* dwarf-index-write.c: Sort headers.
* dwarf-index-common.c: Sort headers.
* dwarf-index-cache.h: Sort headers.
* dwarf-index-cache.c: Sort headers.
* dummy-frame.c: Sort headers.
* dtrace-probe.c: Sort headers.
* disasm.h: Sort headers.
* disasm.c: Sort headers.
* disasm-selftests.c: Sort headers.
* dictionary.c: Sort headers.
* dicos-tdep.c: Sort headers.
* demangle.c: Sort headers.
* dcache.h: Sort headers.
* dcache.c: Sort headers.
* darwin-nat.h: Sort headers.
* darwin-nat.c: Sort headers.
* darwin-nat-info.c: Sort headers.
* d-valprint.c: Sort headers.
* d-namespace.c: Sort headers.
* d-lang.c: Sort headers.
* ctf.c: Sort headers.
* csky-tdep.c: Sort headers.
* csky-linux-tdep.c: Sort headers.
* cris-tdep.c: Sort headers.
* cris-linux-tdep.c: Sort headers.
* cp-valprint.c: Sort headers.
* cp-support.c: Sort headers.
* cp-namespace.c: Sort headers.
* cp-abi.c: Sort headers.
* corelow.c: Sort headers.
* corefile.c: Sort headers.
* continuations.c: Sort headers.
* completer.h: Sort headers.
* completer.c: Sort headers.
* complaints.c: Sort headers.
* coffread.c: Sort headers.
* coff-pe-read.c: Sort headers.
* cli-out.h: Sort headers.
* cli-out.c: Sort headers.
* charset.c: Sort headers.
* c-varobj.c: Sort headers.
* c-valprint.c: Sort headers.
* c-typeprint.c: Sort headers.
* c-lang.c: Sort headers.
* buildsym.c: Sort headers.
* buildsym-legacy.c: Sort headers.
* build-id.h: Sort headers.
* build-id.c: Sort headers.
* btrace.c: Sort headers.
* bsd-uthread.c: Sort headers.
* breakpoint.h: Sort headers.
* breakpoint.c: Sort headers.
* break-catch-throw.c: Sort headers.
* break-catch-syscall.c: Sort headers.
* break-catch-sig.c: Sort headers.
* blockframe.c: Sort headers.
* block.c: Sort headers.
* bfin-tdep.c: Sort headers.
* bfin-linux-tdep.c: Sort headers.
* bfd-target.c: Sort headers.
* bcache.c: Sort headers.
* ax-general.c: Sort headers.
* ax-gdb.h: Sort headers.
* ax-gdb.c: Sort headers.
* avr-tdep.c: Sort headers.
* auxv.c: Sort headers.
* auto-load.c: Sort headers.
* arm-wince-tdep.c: Sort headers.
* arm-tdep.c: Sort headers.
* arm-symbian-tdep.c: Sort headers.
* arm-pikeos-tdep.c: Sort headers.
* arm-obsd-tdep.c: Sort headers.
* arm-nbsd-tdep.c: Sort headers.
* arm-nbsd-nat.c: Sort headers.
* arm-linux-tdep.c: Sort headers.
* arm-linux-nat.c: Sort headers.
* arm-fbsd-tdep.c: Sort headers.
* arm-fbsd-nat.c: Sort headers.
* arm-bsd-tdep.c: Sort headers.
* arch-utils.c: Sort headers.
* arc-tdep.c: Sort headers.
* arc-newlib-tdep.c: Sort headers.
* annotate.h: Sort headers.
* annotate.c: Sort headers.
* amd64-windows-tdep.c: Sort headers.
* amd64-windows-nat.c: Sort headers.
* amd64-tdep.c: Sort headers.
* amd64-sol2-tdep.c: Sort headers.
* amd64-obsd-tdep.c: Sort headers.
* amd64-obsd-nat.c: Sort headers.
* amd64-nbsd-tdep.c: Sort headers.
* amd64-nbsd-nat.c: Sort headers.
* amd64-nat.c: Sort headers.
* amd64-linux-tdep.c: Sort headers.
* amd64-linux-nat.c: Sort headers.
* amd64-fbsd-tdep.c: Sort headers.
* amd64-fbsd-nat.c: Sort headers.
* amd64-dicos-tdep.c: Sort headers.
* amd64-darwin-tdep.c: Sort headers.
* amd64-bsd-nat.c: Sort headers.
* alpha-tdep.c: Sort headers.
* alpha-obsd-tdep.c: Sort headers.
* alpha-nbsd-tdep.c: Sort headers.
* alpha-mdebug-tdep.c: Sort headers.
* alpha-linux-tdep.c: Sort headers.
* alpha-linux-nat.c: Sort headers.
* alpha-bsd-tdep.c: Sort headers.
* alpha-bsd-nat.c: Sort headers.
* aix-thread.c: Sort headers.
* agent.c: Sort headers.
* addrmap.c: Sort headers.
* ada-varobj.c: Sort headers.
* ada-valprint.c: Sort headers.
* ada-typeprint.c: Sort headers.
* ada-tasks.c: Sort headers.
* ada-lang.c: Sort headers.
* aarch64-tdep.c: Sort headers.
* aarch64-ravenscar-thread.c: Sort headers.
* aarch64-newlib-tdep.c: Sort headers.
* aarch64-linux-tdep.c: Sort headers.
* aarch64-linux-nat.c: Sort headers.
* aarch64-fbsd-tdep.c: Sort headers.
* aarch64-fbsd-nat.c: Sort headers.
* aarch32-linux-nat.c: Sort headers.
|
|
|
