| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Without any explicit dependencies specified, the observers attached
to the 'gdb::observers::new_objfile' observable are always notified
in the order in which they have been attached.
The new_objfile observer callback to auto-load scripts is attached in
'_initialize_auto_load'.
The new_objfile observer callback that propagates the new_objfile event
to the Python side is attached in 'gdbpy_initialize_inferior', which is
called via '_initialize_python'.
With '_initialize_python' happening before '_initialize_auto_load',
the consequence was that the new_objfile event was emitted on the Python
side before autoloaded scripts had been executed when a new objfile was
loaded.
As a result, trying to access the objfile's pretty printers (defined in
the autoloaded script) from a handler for the Python-side
'new_objfile' event would fail. Those would only be initialized later on
(when the 'auto_load_new_objfile' callback was called).
To make sure that the objfile passed to the Python event handler
is properly initialized (including its 'pretty_printers' member),
make sure that the 'auto_load_new_objfile' observer is notified
before the 'python_new_objfile' one that propagates the event
to the Python side.
To do this, make use of the mechanism to explicitly specify
dependencies between observers (introduced in a preparatory commit).
Add a corresponding testcase that involves a test library with an autoloaded
Python script and a handler for the Python 'new_objfile' event.
(The real world use case where I came across this issue was in an attempt
to extend handling for GDB pretty printers for dynamically loaded
objfiles in the Qt Creator IDE, s. [1] and [2] for more background.)
[1] https://bugreports.qt.io/browse/QTCREATORBUG-25339
[2] https://codereview.qt-project.org/c/qt-creator/qt-creator/+/333857/1
Tested on x86_64-linux (Debian testing).
gdb/ChangeLog:
* gdb/auto-load.c (_initialize_auto_load): 'Specify token
when attaching the 'auto_load_new_objfile' observer, so
other observers can specify it as a dependency.
* gdb/auto-load.h (struct token): Declare
'auto_load_new_objfile_observer_token' as token to be used
for the 'auto_load_new_objfile' observer.
* gdb/python/py-inferior.c (gdbpy_initialize_inferior): Make
'python_new_objfile' observer depend on 'auto_load_new_objfile'
observer, so it gets notified after the latter.
gdb/testsuite/ChangeLog:
* gdb.python/libpy-autoloaded-pretty-printers-in-newobjfile-event.so-gdb.py: New test.
* gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event-lib.cc: New test.
* gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event-lib.h: New test.
* gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event-main.cc: New test.
* gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event.exp: New test.
* gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event.py: New test.
Change-Id: I8275b3f4c3bec32e56dd7892f9a59d89544edf89
|
|
Give a name to each observer, this will help produce more meaningful
debug message.
gdbsupport/ChangeLog:
* observable.h (class observable) <struct observer> <observer>:
Add name parameter.
<name>: New field.
<attach>: Add name parameter, update all callers.
Change-Id: Ie0cc4664925215b8d2b09e026011b7803549fba0
|
|
Function file_is_auto_load_safe was taking a format string and varargs
just to output a debug print. This is probably because that function is
used in linux-thread-db.c and main.c, but debug_auto_load is static in
auto-load.c. I simplified that, making debug_auto_load visible outside
of auto-load.c, and making the callers of file_is_auto_load_safe output
the debug print themselves.
This file uses _() for internationalization of the debug messages. This
is not necessary, as these are mostly messages for GDB developers, and
it's not used in other files anyway. So I removed them.
The rest is pretty much standard.
gdb/ChangeLog:
* auto-load.h (debug_auto_load): Move here.
(auto_load_debug_printf): New.
* auto-load.c: Use auto_load_debug_printf.
(debug_auto_load): Move to header.
* linux-thread-db.c (try_thread_db_load): Use
auto_load_debug_printf.
* main.c (captured_main_1): Likewise.
Change-Id: I468dc2a1d24b7dbf171f55181a11abbfafe70ba1
|
|
I'm trying to enable clang's -Wmissing-variable-declarations warning.
This patch fixes all the obvious spots where we can simply add "static"
(at least, found when building on x86-64 Linux).
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_record_tdep): Make static.
* aarch64-tdep.c (tdesc_aarch64_list, aarch64_prologue_unwind,
aarch64_stub_unwind, aarch64_normal_base, ): Make static.
* arm-linux-tdep.c (arm_prologue_unwind): Make static.
* arm-tdep.c (struct frame_unwind): Make static.
* auto-load.c (auto_load_safe_path_vec): Make static.
* csky-tdep.c (csky_stub_unwind): Make static.
* gdbarch.c (gdbarch_data_registry): Make static.
* gnu-v2-abi.c (gnu_v2_abi_ops): Make static.
* i386-netbsd-tdep.c (i386nbsd_mc_reg_offset): Make static.
* i386-tdep.c (i386_frame_setup_skip_insns,
i386_tramp_chain_in_reg_insns, i386_tramp_chain_on_stack_insns):
Make static.
* infrun.c (observer_mode): Make static.
* linux-nat.c (sigchld_action): Make static.
* linux-thread-db.c (thread_db_list): Make static.
* maint-test-options.c (maintenance_test_options_list):
* mep-tdep.c (mep_csr_registers): Make static.
* mi/mi-cmds.c (struct mi_cmd_stats): Remove struct type name.
(stats): Make static.
* nat/linux-osdata.c (struct osdata_type): Make static.
* ppc-netbsd-tdep.c (ppcnbsd_reg_offsets): Make static.
* progspace.c (last_program_space_num): Make static.
* python/py-param.c (struct parm_constant): Remove struct type
name.
(parm_constants): Make static.
* python/py-record-btrace.c (btpy_list_methods): Make static.
* python/py-record.c (recpy_gap_type): Make static.
* record.c (record_goto_cmdlist): Make static.
* regcache.c (regcache_descr_handle): Make static.
* registry.h (DEFINE_REGISTRY): Make definition static.
* symmisc.c (std_in, std_out, std_err): Make static.
* top.c (previous_saved_command_line): Make static.
* tracepoint.c (trace_user, trace_notes, trace_stop_notes): Make
static.
* unittests/command-def-selftests.c (nr_duplicates,
nr_invalid_prefixcmd, lists): Make static.
* unittests/observable-selftests.c (test_notification): Make
static.
* unittests/optional/assignment/1.cc (counter): Make static.
* unittests/optional/assignment/2.cc (counter): Make static.
* unittests/optional/assignment/3.cc (counter): Make static.
* unittests/optional/assignment/4.cc (counter): Make static.
* unittests/optional/assignment/5.cc (counter): Make static.
* unittests/optional/assignment/6.cc (counter): Make static.
gdbserver/ChangeLog:
* ax.cc (bytecode_address_table): Make static.
* debug.cc (debug_file): Make static.
* linux-low.cc (stopping_threads): Make static.
(step_over_bkpt): Make static.
* linux-x86-low.cc (amd64_emit_ops, i386_emit_ops): Make static.
* tracepoint.cc (stop_tracing_bkpt, flush_trace_buffer_bkpt,
alloced_trace_state_variables, trace_buffer_ctrl,
tracing_start_time, tracing_stop_time, tracing_user_name,
tracing_notes, tracing_stop_note): Make static.
Change-Id: Ic1d8034723b7802502bda23770893be2338ab020
|
|
Bool-ify the return type of maybe_add_script_text and
maybe_add_script_file, the loaded parameter and related things.
gdb/ChangeLog:
* auto-load.c (struct loaded_script) <loaded>: Change to bool.
(maybe_add_script_file): Change return type to bool.
(maybe_add_script_text): Change return type and
loaded parameter to bool.
(source_script_file): Adjust.
(execute_script_contents): Adjust.
Change-Id: I59ab5862796fa7d154721b56e2ff8612ad5d734b
|
|
A previous patch missed those.
gdb/ChangeLog:
* auto-load.c (auto_load_objfile_script_1): Use bool.
(execute_script_contents): Use bool.
Change-Id: I214bf7ed25af36ced375eb3ec5a403ded2fa572e
|
|
Make it and related functions return bool. Move function comments to
header where applicable.
gdb/ChangeLog:
* auto-load.h (auto_load_gdb_scripts_enabled): Return bool, move
comment here.
* auto-load.c (auto_load_gdb_scripts_enabled): Return bool, move
comment to header.
* extension-priv.h (struct extension_language_script_ops)
<auto_load_enabled>: Return bool.
* extension.h (ext_lang_auto_load_enabled): Return bool, move
comment here.
* extension.c (ext_lang_auto_load_enabled): Return bool, move
comment to header.
* guile/guile-header.h (gdbscm_auto_load_enabled): Return bool,
move comment here.
* guile/scm-auto-load.c (gdbscm_auto_load_enabled): Return bool,
move comment to header.
* python/python-header.h (gdbpy_auto_load_enabled): Return bool,
move comment here.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Return bool,
move comment to header.
Change-Id: I657a17d2dab77a36884a137ce9b23a2cc6d53140
|
|
Make it return bool and change the advice_printed to bool as well. Move
doc to header file.
gdb/ChangeLog:
* auto-load.h (file_is_auto_load_safe): Change return type to
bool, move comment here.
* auto-load.c (file_is_auto_load_safe): Change return type and
advice_printed to bool. Move comment to header.
Change-Id: Ia7395e7cea8880377800240833316e4be5251d49
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
This commit effectively changes the default location of the .gdbinit
file, while maintaining backward compatibility.
For non Apple hosts the .gdbinit file will now be looked for in the
following locations:
$XDG_CONFIG_HOME/gdb/gdbinit
$HOME/.config/gdb/gdbinit
$HOME/.gdbinit
On Apple hosts the search order is instead:
$HOME/Library/Preferences/gdb/gdbinit
$HOME/.gdbinit
I've performed an extensive rewrite of the documentation, moving all
information about initialization files and where to find them into a
new @node, text from other areas has been moved into this one
location, and other areas cross-reference to this new @node as much as
possible.
gdb/ChangeLog:
* NEWS: Mention changes to config file search path.
* main.c
gdb/doc/ChangeLog:
* gdb.texinfo (Mode Options): Descriptions of initialization files
has been moved to 'Initialization Files'.
(Startup): Likewise.
(Initialization Files): New node.
(gdb man): Update to mention alternative file paths.
(gdbinit man): Likewise.
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
Assigning the result of STRIP_DRIVE_SPEC to an std::string creates an
unnecessary copy of the string. STRIP_DRIVE_SPEC is defined as:
#define STRIP_DRIVE_SPEC(f) ((f) + 2)
So if it is passed a "const char *", it returns a "const char *". We
could use a "const char *" intermediary variable instead of an
std::string, or (as implemented in this patch) just use it directly in
the concatenation right after.
gdb/ChangeLog:
* auto-load.c (auto_load_objfile_script_1): Don't use
debugfile_holder as temporary variable when stripping drive
letter.
Change-Id: If2ccc7a156b22100754d9cdf6778ac7eeb93da4c
|
|
This changes auto-load.c to use htab_up, rather than manually calling
htab_delete.
gdb/ChangeLog
2020-09-17 Tom Tromey <tom@tromey.com>
* auto-load.c (struct auto_load_pspace_info)
<~auto_load_pspace_info, auto_load_pspace_info>: Remove.
<loaded_script_files, loaded_script_texts>: Change type to
htab_up.
(~auto_load_pspace_info) Remove.
(init_loaded_scripts_info, maybe_add_script_file)
(maybe_add_script_text, auto_load_info_scripts): Update.
|
|
Fixes this testsuite fail on Windows:
FAIL: gdb.base/auto-load.exp: print $script_loaded
Converts the debugfile path from c:/dir/file to /c/dir/file, so it can be
appended to the auto-load path.
gdb/ChangeLog:
2020-07-08 Hannes Domani <ssbssa@yahoo.de>
* auto-load.c (auto_load_objfile_script_1): Convert drive part
of debugfile path on Windows.
gdb/doc/ChangeLog:
2020-07-08 Hannes Domani <ssbssa@yahoo.de>
* gdb.texinfo: Document Windows drive conversion of
'set auto-load scripts-directory'.
|
|
Currently there are many prefix commands that do nothing but call
either help_list or cmd_show_list. I happened to notice that one such
call, for "set print type", used the wrong command list parameter,
causing incorrect output.
Rather than fix this bug in isolation, I decided to eliminate this
possibility by adding two new ways to add prefix commands, which
simply route the call to help_list or cmd_show_list, as appropriate.
This makes it impossible for a mismatch to occur.
In some cases, a bit of output was removed; however, I don't think
this output in general was very useful. It seemed redundant with
what's already printed by help_list. A representative example is this
hunk, removed from ada-lang.c:
- printf_unfiltered (_(\
-"\"set ada\" must be followed by the name of a setting.\n"));
This simplified the CLI style set/show commands quite a bit, and
allowed the deletion of a macro.
This also cleans up some unusual code in windows-tdep.c.
Tested on x86-64 Fedora 30. Note that I have no way to build the
go32-nat.c change.
gdb/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* auto-load.c (show_auto_load_cmd): Remove.
(auto_load_show_cmdlist_get): Use add_show_prefix_cmd.
* arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd.
(maintenance_print_arc_command): Remove.
* tui/tui-win.c (tui_command): Remove.
(tui_get_cmd_list): Use add_basic_prefix_cmd.
* tui/tui-layout.c (tui_layout_command): Remove.
(_initialize_tui_layout): Use add_basic_prefix_cmd.
* python/python.c (user_set_python, user_show_python): Remove.
(_initialize_python): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* guile/guile.c (set_guile_command, show_guile_command): Remove.
(install_gdb_commands): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_guile_command): Remove.
* dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove.
(_initialize_dwarf2_read): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Remove do_set and do_show parameters.
* cli/cli-style.c (set_style, show_style): Remove.
(_initialize_cli_style): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(cli_style_option::add_setshow_commands): Remove do_set and
do_show parameters.
(cli_style_option::add_setshow_commands): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
(STYLE_ADD_SETSHOW_COMMANDS): Remove macro.
(set_style_name): Remove.
* cli/cli-dump.c (dump_command, append_command): Remove.
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Remove.
(_initialize_cli_dump): Use add_basic_prefix_cmd.
* windows-tdep.c (w32_prefix_command_valid): Remove global.
(init_w32_command_list): Remove; move into ...
(_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Remove.
(_initialize_valprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* typeprint.c (set_print_type, show_print_type): Remove.
(_initialize_typeprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record.c (set_record_command, show_record_command): Remove.
(_initialize_record): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_command, show_command, set_debug, show_debug): Remove.
* top.h (set_history, show_history): Don't declare.
* top.c (set_history, show_history): Remove.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Remove.
(_initialize_target_descriptions): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* symtab.c (info_module_command): Remove.
(_initialize_symtab): Use add_basic_prefix_cmd.
* symfile.c (overlay_command): Remove.
(_initialize_symfile): Use add_basic_prefix_cmd.
* sparc64-tdep.c (info_adi_command): Remove.
(_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd.
* sh-tdep.c (show_sh_command, set_sh_command): Remove.
(_initialize_sh_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* serial.c (serial_set_cmd, serial_show_cmd): Remove.
(_initialize_serial): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove.
(_initialize_ser_tcp): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command)
(_initialize_rs6000_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* riscv-tdep.c (show_riscv_command, set_riscv_command)
(show_debug_riscv_command, set_debug_riscv_command): Remove.
(_initialize_riscv_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* remote.c (remote_command, set_remote_cmd): Remove.
(_initialize_remote): Use add_basic_prefix_cmd.
* record-full.c (set_record_full_command)
(show_record_full_command): Remove.
(_initialize_record_full): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record-btrace.c (cmd_set_record_btrace)
(cmd_show_record_btrace, cmd_set_record_btrace_bts)
(cmd_show_record_btrace_bts, cmd_set_record_btrace_pt)
(cmd_show_record_btrace_pt): Remove.
(_initialize_record_btrace): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Remove.
(_initialize_ravenscar): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (show_mips_command, set_mips_command)
(_initialize_mips_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_check_command, maintenance_print_command)
(maintenance_set_cmd, maintenance_show_cmd): Remove.
(_initialize_maint_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_per_command_cmd): Remove.
* maint-test-settings.c (maintenance_set_test_settings_cmd):
Remove.
(maintenance_show_test_settings_cmd): Remove.
(_initialize_maint_test_settings): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint-test-options.c (maintenance_test_options_command):
Remove.
(_initialize_maint_test_options): Use add_basic_prefix_cmd.
* macrocmd.c (macro_command): Remove
(_initialize_macrocmd): Use add_basic_prefix_cmd.
* language.c (set_check, show_check): Remove.
(_initialize_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* infcmd.c (unset_command): Remove.
(_initialize_infcmd): Use add_basic_prefix_cmd.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove.
(_initialize_i386_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* go32-nat.c (go32_info_dos_command): Remove.
(_initialize_go32_nat): Use add_basic_prefix_cmd.
* cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd)
(do_show_prefix_cmd, add_show_prefix_cmd): New functions.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove.
(_initialize_frame): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* dcache.c (set_dcache_command, show_dcache_command): Remove.
(_initialize_dcache): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cp-support.c (maint_cplus_command): Remove.
(_initialize_cp_support): Use add_basic_prefix_cmd.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd, _initialize_btrace): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
* breakpoint.c (save_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd.
* arm-tdep.c (set_arm_command, show_arm_command): Remove.
(_initialize_arm_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd)
(set_ada_command, show_ada_command): Remove.
(_initialize_ada_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare.
gdb/testsuite/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
Update tests.
* gdb.btrace/cpu.exp: Update tests.
* gdb.base/maint.exp: Update tests.
* gdb.base/default.exp: Update tests.
* gdb.base/completion.exp: Update tests.
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This adds more uses of styled_string, changing gdb to style some
output that was previously left unstyled.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* stack.c (print_frame, info_frame_command_core): Use
styled_string.
* linux-thread-db.c (try_thread_db_load_1)
(try_thread_db_load_from_pdir_1): Use styled_string.
* auto-load.c (file_is_auto_load_safe, execute_script_contents)
(auto_load_section_scripts, info_auto_load_local_gdbinit)
(maybe_print_unsupported_script_warning)
(maybe_print_script_not_found_warning): Use styled_string.
* ada-lang.c (user_select_syms): Use styled_string.
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
This is for add_setshow_boolean_cmd as well as the gdb::option interface.
gdb/ChangeLog:
2019-09-17 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_ignore_descriptive_types_p): Change to bool.
(print_signatures): Likewise.
(trust_pad_over_xvs): Likewise.
* arch/aarch64-insn.c (aarch64_debug): Likewise.
* arch/aarch64-insn.h (aarch64_debug): Likewise.
* arm-linux-nat.c (arm_apcs_32): Likewise.
* arm-linux-tdep.c (arm_apcs_32): Likewise.
* arm-nbsd-nat.c (arm_apcs_32): Likewise.
* arm-tdep.c (arm_debug): Likewise.
(arm_apcs_32): Likewise.
* auto-load.c (debug_auto_load): Likewise.
(auto_load_gdb_scripts): Likewise.
(global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* auto-load.h (global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* breakpoint.c (disconnected_dprintf): Likewise.
(breakpoint_proceeded): Likewise.
(automatic_hardware_breakpoints): Likewise.
(always_inserted_mode): Likewise.
(target_exact_watchpoints): Likewise.
(_initialize_breakpoint): Update.
* breakpoint.h (target_exact_watchpoints): Change to bool.
* btrace.c (maint_btrace_pt_skip_pad): Likewise.
* cli/cli-cmds.c (trace_commands): Likewise.
* cli/cli-cmds.h (trace_commands): Likewise.
* cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument
to bool*.
* cli/cli-logging.c (logging_overwrite): Change to bool.
(logging_redirect): Likewise.
(debug_redirect): Likewise.
* cli/cli-option.h (option_def) <boolean>: Change return type to bool*.
(struct boolean_option_def) <get_var_address_cb_>: Change return type
to bool.
<boolean_option_def>: Update.
(struct flag_option_def): Change default type of Context to bool
from int.
<flag_option_def>: Change return type of var_address_cb_ to bool*.
* cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*.
(get_setshow_command_value_string): Likewise.
* cli/cli-style.c (cli_styling): Change to bool.
(source_styling): Likewise.
* cli/cli-style.h (source_styling): Likewise.
(cli_styling): Likewise.
* cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change
to bool.
* command.h (var_types): Update comment.
(add_setshow_boolean_cmd): Change int* var argument to bool*.
* compile/compile-cplus-types.c (debug_compile_cplus_types): Change to
bool.
(debug_compile_cplus_scopes): Likewise.
* compile/compile-internal.h (compile_debug): Likewise.
* compile/compile.c (compile_debug): Likewise.
(struct compile_options) <raw>: Likewise.
* cp-support.c (catch_demangler_crashes): Likewise.
* cris-tdep.c (usr_cmd_cris_version_valid): Likewise.
(usr_cmd_cris_dwarf2_cfi): Likewise.
* csky-tdep.c (csky_debug): Likewise.
* darwin-nat.c (enable_mach_exceptions): Likewise.
* dcache.c (dcache_enabled_p): Likewise.
* defs.h (info_verbose): Likewise.
* demangle.c (demangle): Likewise.
(asm_demangle): Likewise.
* dwarf-index-cache.c (debug_index_cache): Likewise.
* dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2read.c (check_physname): Likewise.
(use_deprecated_index_sections): Likewise.
(dwarf_always_disassemble): Likewise.
* eval.c (overload_resolution): Likewise.
* event-top.c (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* event-top.h (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* exec.c (write_files): Likewise.
* fbsd-nat.c (debug_fbsd_lwp): Likewise
(debug_fbsd_nat): Likewise.
* frame.h (struct frame_print_options) <print_raw_frame_arguments>:
Likewise.
(struct set_backtrace_options) <backtrace_past_main>: Likewise.
<backtrace_past_entry> Likewise.
* gdb-demangle.h (demangle): Likewise.
(asm_demangle): Likewise.
* gdb_bfd.c (bfd_sharing): Likewise.
* gdbcore.h (write_files): Likewise.
* gdbsupport/common-debug.c (show_debug_regs): Likewise.
* gdbsupport/common-debug.h (show_debug_regs): Likewise.
* gdbthread.h (print_thread_events): Likewise.
* gdbtypes.c (opaque_type_resolution): Likewise.
(strict_type_checking): Likewise.
* gnu-nat.c (gnu_debug_flag): Likewise.
* guile/scm-auto-load.c (auto_load_guile_scripts): Likewise.
* guile/scm-param.c (pascm_variable): Add boolval.
(add_setshow_generic): Update.
(pascm_param_value): Update.
(pascm_set_param_value_x): Update.
* hppa-tdep.c (hppa_debug): Change to bool..
* infcall.c (may_call_functions_p): Likewise.
(coerce_float_to_double_p): Likewise.
(unwind_on_signal_p): Likewise.
(unwind_on_terminating_exception_p): Likewise.
* infcmd.c (startup_with_shell): Likewise.
* inferior.c (print_inferior_events): Likewise.
* inferior.h (startup_with_shell): Likewise.
(print_inferior_events): Likewise.
* infrun.c (step_stop_if_no_debug): Likewise.
(detach_fork): Likewise.
(debug_displaced): Likewise.
(disable_randomization): Likewise.
(non_stop): Likewise.
(non_stop_1): Likewise.
(observer_mode): Likewise.
(observer_mode_1): Likewise.
(set_observer_mode): Update.
(sched_multi): Change to bool.
* infrun.h (debug_displaced): Likewise.
(sched_multi): Likewise.
(step_stop_if_no_debug): Likewise.
(non_stop): Likewise.
(disable_randomization): Likewise.
* linux-tdep.c (use_coredump_filter): Likewise.
(dump_excluded_mappings): Likewise.
* linux-thread-db.c (auto_load_thread_db): Likewise.
(check_thread_db_on_load): Likewise.
* main.c (captured_main_1): Update.
* maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt,
xx2_opt, boolean_opt>: Change to bool.
* maint-test-settings.c (maintenance_test_settings_boolean): Likewise.
* maint.c (maintenance_profile_p): Likewise.
(per_command_time): Likewise.
(per_command_space): Likewise.
(per_command_symtab): Likewise.
* memattr.c (inaccessible_by_default): Likewise.
* mi/mi-main.c (mi_async): Likewise.
(mi_async_1): Likewise.
* mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise.
* nat/fork-inferior.h (startup_with_shell): Likewise.
* nat/linux-namespaces.c (debug_linux_namespaces): Likewise.
* nat/linux-namespaces.h (debug_linux_namespaces): Likewise.
* nios2-tdep.c (nios2_debug): Likewise.
* or1k-tdep.c (or1k_debug): Likewise.
* parse.c (parser_debug): Likewise.
* parser-defs.h (parser_debug): Likewise.
* printcmd.c (print_symbol_filename): Likewise.
* proc-api.c (procfs_trace): Likewise.
* python/py-auto-load.c (auto_load_python_scripts): Likewise.
* python/py-param.c (union parmpy_variable): Add "bool boolval" field.
(set_parameter_value): Update.
(add_setshow_generic): Update.
* python/py-value.c (copy_py_bool_obj): Change argument from int*
to bool*.
* python/python.c (gdbpy_parameter_value): Cast to bool* instead of
int*.
* ravenscar-thread.c (ravenscar_task_support): Change to bool.
* record-btrace.c (record_btrace_target::store_registers): Update.
* record-full.c (record_full_memory_query): Change to bool.
(record_full_stop_at_limit): Likewise.
* record-full.h (record_full_memory_query): Likewise.
* remote-notif.c (notif_debug): Likewise.
* remote-notif.h (notif_debug): Likewise.
* remote.c (use_range_stepping): Likewise.
(interrupt_on_connect): Likewise.
(remote_break): Likewise.
* ser-tcp.c (tcp_auto_retry): Likewise.
* ser-unix.c (serial_hwflow): Likewise.
* skip.c (debug_skip): Likewise.
* solib-aix.c (solib_aix_debug): Likewise.
* spu-tdep.c (spu_stop_on_load_p): Likewise.
(spu_auto_flush_cache_p): Likewise.
* stack.c (struct backtrace_cmd_options) <full, no_filters, hide>:
Likewise.
(struct info_print_options) <quiet>: Likewise.
* symfile-debug.c (debug_symfile): Likewise.
* symfile.c (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symfile.h (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symtab.c (basenames_may_differ): Likewise.
(struct filename_partial_match_opts) <dirname, basename>: Likewise.
(struct info_print_options) <quiet, exclude_minsyms>: Likewise.
(struct info_types_options) <quiet>: Likewise.
* symtab.h (demangle): Likewise.
(basenames_may_differ): Likewise.
* target-dcache.c (stack_cache_enabled_1): Likewise.
(code_cache_enabled_1): Likewise.
* target.c (trust_readonly): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
(auto_connect_native_target): Likewise.
(target_stop_and_wait): Update.
(target_async_permitted): Change to bool.
(target_async_permitted_1): Likewise.
(may_write_registers_1): Likewise.
(may_write_memory_1): Likewise.
(may_insert_breakpoints_1): Likewise.
(may_insert_tracepoints_1): Likewise.
(may_insert_fast_tracepoints_1): Likewise.
(may_stop_1): Likewise.
* target.h (target_async_permitted): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
* thread.c (struct info_threads_opts) <show_global_ids>: Likewise.
(make_thread_apply_all_options_def_group): Change argument from int*
to bool*.
(thread_apply_all_command): Update.
(print_thread_events): Change to bool.
* top.c (confirm): Likewise.
(command_editing_p): Likewise.
(history_expansion_p): Likewise.
(write_history_p): Likewise.
(info_verbose): Likewise.
* top.h (confirm): Likewise.
(history_expansion_p): Likewise.
* tracepoint.c (disconnected_tracing): Likewise.
(circular_trace_buffer): Likewise.
* typeprint.c (print_methods): Likewise.
(print_typedefs): Likewise.
* utils.c (debug_timestamp): Likewise.
(sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* utils.h (sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* valops.c (overload_resolution): Likewise.
* valprint.h (struct value_print_options) <prettyformat_arrays,
prettyformat_structs, vtblprint, unionprint, addressprint, objectprint,
stop_print_at_null, print_array_indexes, deref_ref, static_field_print,
pascal_static_field_print, raw, summary, symbol_print, finish_print>:
Likewise.
* windows-nat.c (new_console): Likewise.
(cygwin_exceptions): Likewise.
(new_group): Likewise.
(debug_exec): Likewise.
(debug_events): Likewise.
(debug_memory): Likewise.
(debug_exceptions): Likewise.
(useshell): Likewise.
* windows-tdep.c (maint_display_all_tib): Likewise.
* xml-support.c (debug_xml): Likewise.
|
|
This simplifies memory management. I've also changed some global variables
to std::string accordingly (which store the result of these functions),
but not all because some are used with add_setshow_optional_filename_cmd
which requires a char*.
gdb/ChangeLog:
2019-09-11 Christian Biesinger <cbiesinger@google.com>
* auto-load.c (auto_load_expand_dir_vars): Update.
* defs.h (gdb_datadir): Change to std::string.
(python_libdir): Likewise.
(relocate_gdb_directory): Change return type to std::string.
* guile/guile.c (gdbscm_data_directory): Update.
(initialize_scheme_side): Update.
* jit.c (jit_reader_dir): Change to std::string.
(jit_reader_load_command): Update.
* main.c (gdb_datadir): Change to std::string.
(python_libdir): Likewise.
(set_gdb_data_directory): Update.
(relocate_path): Change to return std::string.
(relocate_gdb_directory): Change to return std::string.
(relocate_gdbinit_path_maybe_in_datadir): Update.
(captured_main_1): Update.
* python/python.c (do_start_initialization): Update.
* top.c (show_gdb_datadir): Update.
* xml-syscall.c (xml_init_syscalls_info): Update.
(init_syscalls_info): Update.
|
|
I noticed that init_cli_cmds only installs a command, and so doesn't
need to be handled specially. This patch merges it into
_initialize_cli_cmds.
The help text is constructed dynamically, which is sometimes an
indication that special treatment is needed; but in this case it is
just to insert the value of "gdbinit", which is created at
compile-time and not modified; so this doesn't affect the result.
This version also removes the "gdbinit" global. There's no need for
it, as GDBINIT can be used instead. Note, though, that the help text
in question must still be dynamically constructed, in order to be
i18n-friendly.
gdb/ChangeLog
2019-07-11 Tom Tromey <tromey@adacore.com>
* main.c (get_init_files): Use GDBINIT, not gdbinit.
* auto-load.c (file_is_auto_load_safe): Use GDBINIT, not gdbinit.
* top.h (gdbinit): Don't declare.
* cli/cli-cmds.c (init_cli_cmds): Remove, merging contents
into...
(_initialize_cli_cmds): ...here. Use GDBINIT, not gdbinit.
* top.c (gdb_init): Don't call init_cli_cmds.
(gdbinit): Remove.
* cli/cli-cmds.h (init_cli_cmds): Don't declare.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
This changes auto-load.c to use the type-safe registry API. It also
changes a couple of types to "bool", removing uses of "FALSE".
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* auto-load.c (struct auto_load_pspace_info): Add destructor and
initializers.
<unsupported_script_warning_printed,
script_not_found_warning_printed>: Now bool.
(auto_load_pspace_data): Change type.
(~auto_load_pspace_info): Rename from
auto_load_pspace_data_cleanup.
(get_auto_load_pspace_data, init_loaded_scripts_info)
(clear_section_scripts, maybe_print_unsupported_script_warning)
(maybe_print_script_not_found_warning, _initialize_auto_load):
Update.
|
|
Andreas Schwab and John Baldwin pointed out some bugs in the header
sorting patch; and I noticed that the output was not correct when
limited to a subset of files (a bug in my script).
So, I'm reverting the patch. I may try again after fixing the issues
pointed out.
gdb/ChangeLog
2019-04-05 Tom Tromey <tom@tromey.com>
Revert the header-sorting patch.
* ft32-tdep.c: Revert.
* frv-tdep.c: Revert.
* frv-linux-tdep.c: Revert.
* frame.c: Revert.
* frame-unwind.c: Revert.
* frame-base.c: Revert.
* fork-child.c: Revert.
* findvar.c: Revert.
* findcmd.c: Revert.
* filesystem.c: Revert.
* filename-seen-cache.h: Revert.
* filename-seen-cache.c: Revert.
* fbsd-tdep.c: Revert.
* fbsd-nat.h: Revert.
* fbsd-nat.c: Revert.
* f-valprint.c: Revert.
* f-typeprint.c: Revert.
* f-lang.c: Revert.
* extension.h: Revert.
* extension.c: Revert.
* extension-priv.h: Revert.
* expprint.c: Revert.
* exec.h: Revert.
* exec.c: Revert.
* exceptions.c: Revert.
* event-top.c: Revert.
* event-loop.c: Revert.
* eval.c: Revert.
* elfread.c: Revert.
* dwarf2read.h: Revert.
* dwarf2read.c: Revert.
* dwarf2loc.c: Revert.
* dwarf2expr.h: Revert.
* dwarf2expr.c: Revert.
* dwarf2-frame.c: Revert.
* dwarf2-frame-tailcall.c: Revert.
* dwarf-index-write.h: Revert.
* dwarf-index-write.c: Revert.
* dwarf-index-common.c: Revert.
* dwarf-index-cache.h: Revert.
* dwarf-index-cache.c: Revert.
* dummy-frame.c: Revert.
* dtrace-probe.c: Revert.
* disasm.h: Revert.
* disasm.c: Revert.
* disasm-selftests.c: Revert.
* dictionary.c: Revert.
* dicos-tdep.c: Revert.
* demangle.c: Revert.
* dcache.h: Revert.
* dcache.c: Revert.
* darwin-nat.h: Revert.
* darwin-nat.c: Revert.
* darwin-nat-info.c: Revert.
* d-valprint.c: Revert.
* d-namespace.c: Revert.
* d-lang.c: Revert.
* ctf.c: Revert.
* csky-tdep.c: Revert.
* csky-linux-tdep.c: Revert.
* cris-tdep.c: Revert.
* cris-linux-tdep.c: Revert.
* cp-valprint.c: Revert.
* cp-support.c: Revert.
* cp-namespace.c: Revert.
* cp-abi.c: Revert.
* corelow.c: Revert.
* corefile.c: Revert.
* continuations.c: Revert.
* completer.h: Revert.
* completer.c: Revert.
* complaints.c: Revert.
* coffread.c: Revert.
* coff-pe-read.c: Revert.
* cli-out.h: Revert.
* cli-out.c: Revert.
* charset.c: Revert.
* c-varobj.c: Revert.
* c-valprint.c: Revert.
* c-typeprint.c: Revert.
* c-lang.c: Revert.
* buildsym.c: Revert.
* buildsym-legacy.c: Revert.
* build-id.h: Revert.
* build-id.c: Revert.
* btrace.c: Revert.
* bsd-uthread.c: Revert.
* breakpoint.h: Revert.
* breakpoint.c: Revert.
* break-catch-throw.c: Revert.
* break-catch-syscall.c: Revert.
* break-catch-sig.c: Revert.
* blockframe.c: Revert.
* block.c: Revert.
* bfin-tdep.c: Revert.
* bfin-linux-tdep.c: Revert.
* bfd-target.c: Revert.
* bcache.c: Revert.
* ax-general.c: Revert.
* ax-gdb.h: Revert.
* ax-gdb.c: Revert.
* avr-tdep.c: Revert.
* auxv.c: Revert.
* auto-load.c: Revert.
* arm-wince-tdep.c: Revert.
* arm-tdep.c: Revert.
* arm-symbian-tdep.c: Revert.
* arm-pikeos-tdep.c: Revert.
* arm-obsd-tdep.c: Revert.
* arm-nbsd-tdep.c: Revert.
* arm-nbsd-nat.c: Revert.
* arm-linux-tdep.c: Revert.
* arm-linux-nat.c: Revert.
* arm-fbsd-tdep.c: Revert.
* arm-fbsd-nat.c: Revert.
* arm-bsd-tdep.c: Revert.
* arch-utils.c: Revert.
* arc-tdep.c: Revert.
* arc-newlib-tdep.c: Revert.
* annotate.h: Revert.
* annotate.c: Revert.
* amd64-windows-tdep.c: Revert.
* amd64-windows-nat.c: Revert.
* amd64-tdep.c: Revert.
* amd64-sol2-tdep.c: Revert.
* amd64-obsd-tdep.c: Revert.
* amd64-obsd-nat.c: Revert.
* amd64-nbsd-tdep.c: Revert.
* amd64-nbsd-nat.c: Revert.
* amd64-nat.c: Revert.
* amd64-linux-tdep.c: Revert.
* amd64-linux-nat.c: Revert.
* amd64-fbsd-tdep.c: Revert.
* amd64-fbsd-nat.c: Revert.
* amd64-dicos-tdep.c: Revert.
* amd64-darwin-tdep.c: Revert.
* amd64-bsd-nat.c: Revert.
* alpha-tdep.c: Revert.
* alpha-obsd-tdep.c: Revert.
* alpha-nbsd-tdep.c: Revert.
* alpha-mdebug-tdep.c: Revert.
* alpha-linux-tdep.c: Revert.
* alpha-linux-nat.c: Revert.
* alpha-bsd-tdep.c: Revert.
* alpha-bsd-nat.c: Revert.
* aix-thread.c: Revert.
* agent.c: Revert.
* addrmap.c: Revert.
* ada-varobj.c: Revert.
* ada-valprint.c: Revert.
* ada-typeprint.c: Revert.
* ada-tasks.c: Revert.
* ada-lang.c: Revert.
* aarch64-tdep.c: Revert.
* aarch64-ravenscar-thread.c: Revert.
* aarch64-newlib-tdep.c: Revert.
* aarch64-linux-tdep.c: Revert.
* aarch64-linux-nat.c: Revert.
* aarch64-fbsd-tdep.c: Revert.
* aarch64-fbsd-nat.c: Revert.
* aarch32-linux-nat.c: Revert.
|
|
This patch sorts the include files for the files [a-f]*.[chyl].
The patch was written by a script.
Tested by the buildbot.
I will follow up with patches to sort the remaining files, by sorting
a subset, testing them, and then checking them in.
gdb/ChangeLog
2019-04-05 Tom Tromey <tom@tromey.com>
* ft32-tdep.c: Sort headers.
* frv-tdep.c: Sort headers.
* frv-linux-tdep.c: Sort headers.
* frame.c: Sort headers.
* frame-unwind.c: Sort headers.
* frame-base.c: Sort headers.
* fork-child.c: Sort headers.
* findvar.c: Sort headers.
* findcmd.c: Sort headers.
* filesystem.c: Sort headers.
* filename-seen-cache.h: Sort headers.
* filename-seen-cache.c: Sort headers.
* fbsd-tdep.c: Sort headers.
* fbsd-nat.h: Sort headers.
* fbsd-nat.c: Sort headers.
* f-valprint.c: Sort headers.
* f-typeprint.c: Sort headers.
* f-lang.c: Sort headers.
* extension.h: Sort headers.
* extension.c: Sort headers.
* extension-priv.h: Sort headers.
* expprint.c: Sort headers.
* exec.h: Sort headers.
* exec.c: Sort headers.
* exceptions.c: Sort headers.
* event-top.c: Sort headers.
* event-loop.c: Sort headers.
* eval.c: Sort headers.
* elfread.c: Sort headers.
* dwarf2read.h: Sort headers.
* dwarf2read.c: Sort headers.
* dwarf2loc.c: Sort headers.
* dwarf2expr.h: Sort headers.
* dwarf2expr.c: Sort headers.
* dwarf2-frame.c: Sort headers.
* dwarf2-frame-tailcall.c: Sort headers.
* dwarf-index-write.h: Sort headers.
* dwarf-index-write.c: Sort headers.
* dwarf-index-common.c: Sort headers.
* dwarf-index-cache.h: Sort headers.
* dwarf-index-cache.c: Sort headers.
* dummy-frame.c: Sort headers.
* dtrace-probe.c: Sort headers.
* disasm.h: Sort headers.
* disasm.c: Sort headers.
* disasm-selftests.c: Sort headers.
* dictionary.c: Sort headers.
* dicos-tdep.c: Sort headers.
* demangle.c: Sort headers.
* dcache.h: Sort headers.
* dcache.c: Sort headers.
* darwin-nat.h: Sort headers.
* darwin-nat.c: Sort headers.
* darwin-nat-info.c: Sort headers.
* d-valprint.c: Sort headers.
* d-namespace.c: Sort headers.
* d-lang.c: Sort headers.
* ctf.c: Sort headers.
* csky-tdep.c: Sort headers.
* csky-linux-tdep.c: Sort headers.
* cris-tdep.c: Sort headers.
* cris-linux-tdep.c: Sort headers.
* cp-valprint.c: Sort headers.
* cp-support.c: Sort headers.
* cp-namespace.c: Sort headers.
* cp-abi.c: Sort headers.
* corelow.c: Sort headers.
* corefile.c: Sort headers.
* continuations.c: Sort headers.
* completer.h: Sort headers.
* completer.c: Sort headers.
* complaints.c: Sort headers.
* coffread.c: Sort headers.
* coff-pe-read.c: Sort headers.
* cli-out.h: Sort headers.
* cli-out.c: Sort headers.
* charset.c: Sort headers.
* c-varobj.c: Sort headers.
* c-valprint.c: Sort headers.
* c-typeprint.c: Sort headers.
* c-lang.c: Sort headers.
* buildsym.c: Sort headers.
* buildsym-legacy.c: Sort headers.
* build-id.h: Sort headers.
* build-id.c: Sort headers.
* btrace.c: Sort headers.
* bsd-uthread.c: Sort headers.
* breakpoint.h: Sort headers.
* breakpoint.c: Sort headers.
* break-catch-throw.c: Sort headers.
* break-catch-syscall.c: Sort headers.
* break-catch-sig.c: Sort headers.
* blockframe.c: Sort headers.
* block.c: Sort headers.
* bfin-tdep.c: Sort headers.
* bfin-linux-tdep.c: Sort headers.
* bfd-target.c: Sort headers.
* bcache.c: Sort headers.
* ax-general.c: Sort headers.
* ax-gdb.h: Sort headers.
* ax-gdb.c: Sort headers.
* avr-tdep.c: Sort headers.
* auxv.c: Sort headers.
* auto-load.c: Sort headers.
* arm-wince-tdep.c: Sort headers.
* arm-tdep.c: Sort headers.
* arm-symbian-tdep.c: Sort headers.
* arm-pikeos-tdep.c: Sort headers.
* arm-obsd-tdep.c: Sort headers.
* arm-nbsd-tdep.c: Sort headers.
* arm-nbsd-nat.c: Sort headers.
* arm-linux-tdep.c: Sort headers.
* arm-linux-nat.c: Sort headers.
* arm-fbsd-tdep.c: Sort headers.
* arm-fbsd-nat.c: Sort headers.
* arm-bsd-tdep.c: Sort headers.
* arch-utils.c: Sort headers.
* arc-tdep.c: Sort headers.
* arc-newlib-tdep.c: Sort headers.
* annotate.h: Sort headers.
* annotate.c: Sort headers.
* amd64-windows-tdep.c: Sort headers.
* amd64-windows-nat.c: Sort headers.
* amd64-tdep.c: Sort headers.
* amd64-sol2-tdep.c: Sort headers.
* amd64-obsd-tdep.c: Sort headers.
* amd64-obsd-nat.c: Sort headers.
* amd64-nbsd-tdep.c: Sort headers.
* amd64-nbsd-nat.c: Sort headers.
* amd64-nat.c: Sort headers.
* amd64-linux-tdep.c: Sort headers.
* amd64-linux-nat.c: Sort headers.
* amd64-fbsd-tdep.c: Sort headers.
* amd64-fbsd-nat.c: Sort headers.
* amd64-dicos-tdep.c: Sort headers.
* amd64-darwin-tdep.c: Sort headers.
* amd64-bsd-nat.c: Sort headers.
* alpha-tdep.c: Sort headers.
* alpha-obsd-tdep.c: Sort headers.
* alpha-nbsd-tdep.c: Sort headers.
* alpha-mdebug-tdep.c: Sort headers.
* alpha-linux-tdep.c: Sort headers.
* alpha-linux-nat.c: Sort headers.
* alpha-bsd-tdep.c: Sort headers.
* alpha-bsd-nat.c: Sort headers.
* aix-thread.c: Sort headers.
* agent.c: Sort headers.
* addrmap.c: Sort headers.
* ada-varobj.c: Sort headers.
* ada-valprint.c: Sort headers.
* ada-typeprint.c: Sort headers.
* ada-tasks.c: Sort headers.
* ada-lang.c: Sort headers.
* aarch64-tdep.c: Sort headers.
* aarch64-ravenscar-thread.c: Sort headers.
* aarch64-newlib-tdep.c: Sort headers.
* aarch64-linux-tdep.c: Sort headers.
* aarch64-linux-nat.c: Sort headers.
* aarch64-fbsd-tdep.c: Sort headers.
* aarch64-fbsd-nat.c: Sort headers.
* aarch32-linux-nat.c: Sort headers.
|
|
|
|
This changes all includes to use the form "common/filename.h" rather
than just "filename.h". This was written by a script.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* xtensa-linux-nat.c: Fix common/ includes.
* xml-support.h: Fix common/ includes.
* xml-support.c: Fix common/ includes.
* x86-linux-nat.c: Fix common/ includes.
* windows-nat.c: Fix common/ includes.
* varobj.h: Fix common/ includes.
* varobj.c: Fix common/ includes.
* value.c: Fix common/ includes.
* valops.c: Fix common/ includes.
* utils.c: Fix common/ includes.
* unittests/xml-utils-selftests.c: Fix common/ includes.
* unittests/utils-selftests.c: Fix common/ includes.
* unittests/unpack-selftests.c: Fix common/ includes.
* unittests/tracepoint-selftests.c: Fix common/ includes.
* unittests/style-selftests.c: Fix common/ includes.
* unittests/string_view-selftests.c: Fix common/ includes.
* unittests/scoped_restore-selftests.c: Fix common/ includes.
* unittests/scoped_mmap-selftests.c: Fix common/ includes.
* unittests/scoped_fd-selftests.c: Fix common/ includes.
* unittests/rsp-low-selftests.c: Fix common/ includes.
* unittests/parse-connection-spec-selftests.c: Fix common/
includes.
* unittests/optional-selftests.c: Fix common/ includes.
* unittests/offset-type-selftests.c: Fix common/ includes.
* unittests/observable-selftests.c: Fix common/ includes.
* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
* unittests/memrange-selftests.c: Fix common/ includes.
* unittests/memory-map-selftests.c: Fix common/ includes.
* unittests/lookup_name_info-selftests.c: Fix common/ includes.
* unittests/function-view-selftests.c: Fix common/ includes.
* unittests/environ-selftests.c: Fix common/ includes.
* unittests/copy_bitwise-selftests.c: Fix common/ includes.
* unittests/common-utils-selftests.c: Fix common/ includes.
* unittests/cli-utils-selftests.c: Fix common/ includes.
* unittests/array-view-selftests.c: Fix common/ includes.
* ui-file.c: Fix common/ includes.
* tui/tui-io.c: Fix common/ includes.
* tracepoint.h: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* tracefile-tfile.c: Fix common/ includes.
* top.h: Fix common/ includes.
* top.c: Fix common/ includes.
* thread.c: Fix common/ includes.
* target/waitstatus.h: Fix common/ includes.
* target/waitstatus.c: Fix common/ includes.
* target.h: Fix common/ includes.
* target.c: Fix common/ includes.
* target-memory.c: Fix common/ includes.
* target-descriptions.c: Fix common/ includes.
* symtab.h: Fix common/ includes.
* symfile.c: Fix common/ includes.
* stap-probe.c: Fix common/ includes.
* spu-linux-nat.c: Fix common/ includes.
* sparc-nat.c: Fix common/ includes.
* source.c: Fix common/ includes.
* solib.c: Fix common/ includes.
* solib-target.c: Fix common/ includes.
* ser-unix.c: Fix common/ includes.
* ser-tcp.c: Fix common/ includes.
* ser-pipe.c: Fix common/ includes.
* ser-base.c: Fix common/ includes.
* selftest-arch.c: Fix common/ includes.
* s12z-tdep.c: Fix common/ includes.
* rust-exp.y: Fix common/ includes.
* rs6000-aix-tdep.c: Fix common/ includes.
* riscv-tdep.c: Fix common/ includes.
* remote.c: Fix common/ includes.
* remote-notif.h: Fix common/ includes.
* remote-fileio.h: Fix common/ includes.
* remote-fileio.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* record-btrace.c: Fix common/ includes.
* python/python.c: Fix common/ includes.
* python/py-type.c: Fix common/ includes.
* python/py-inferior.c: Fix common/ includes.
* progspace.h: Fix common/ includes.
* producer.c: Fix common/ includes.
* procfs.c: Fix common/ includes.
* proc-api.c: Fix common/ includes.
* printcmd.c: Fix common/ includes.
* ppc-linux-nat.c: Fix common/ includes.
* parser-defs.h: Fix common/ includes.
* osdata.c: Fix common/ includes.
* obsd-nat.c: Fix common/ includes.
* nat/x86-linux.c: Fix common/ includes.
* nat/x86-linux-dregs.c: Fix common/ includes.
* nat/x86-dregs.h: Fix common/ includes.
* nat/x86-dregs.c: Fix common/ includes.
* nat/ppc-linux.c: Fix common/ includes.
* nat/mips-linux-watch.h: Fix common/ includes.
* nat/mips-linux-watch.c: Fix common/ includes.
* nat/linux-waitpid.c: Fix common/ includes.
* nat/linux-ptrace.h: Fix common/ includes.
* nat/linux-ptrace.c: Fix common/ includes.
* nat/linux-procfs.c: Fix common/ includes.
* nat/linux-personality.c: Fix common/ includes.
* nat/linux-osdata.c: Fix common/ includes.
* nat/linux-namespaces.c: Fix common/ includes.
* nat/linux-btrace.h: Fix common/ includes.
* nat/linux-btrace.c: Fix common/ includes.
* nat/fork-inferior.c: Fix common/ includes.
* nat/amd64-linux-siginfo.c: Fix common/ includes.
* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
* nat/aarch64-linux.c: Fix common/ includes.
* nat/aarch64-linux-hw-point.h: Fix common/ includes.
* nat/aarch64-linux-hw-point.c: Fix common/ includes.
* namespace.h: Fix common/ includes.
* mips-linux-tdep.c: Fix common/ includes.
* minsyms.c: Fix common/ includes.
* mi/mi-parse.h: Fix common/ includes.
* mi/mi-main.c: Fix common/ includes.
* mi/mi-cmd-env.c: Fix common/ includes.
* memrange.h: Fix common/ includes.
* memattr.c: Fix common/ includes.
* maint.h: Fix common/ includes.
* maint.c: Fix common/ includes.
* main.c: Fix common/ includes.
* machoread.c: Fix common/ includes.
* location.c: Fix common/ includes.
* linux-thread-db.c: Fix common/ includes.
* linux-nat.c: Fix common/ includes.
* linux-fork.c: Fix common/ includes.
* inline-frame.c: Fix common/ includes.
* infrun.c: Fix common/ includes.
* inflow.c: Fix common/ includes.
* inferior.h: Fix common/ includes.
* inferior.c: Fix common/ includes.
* infcmd.c: Fix common/ includes.
* inf-ptrace.c: Fix common/ includes.
* inf-child.c: Fix common/ includes.
* ia64-linux-nat.c: Fix common/ includes.
* i387-tdep.c: Fix common/ includes.
* i386-tdep.c: Fix common/ includes.
* i386-linux-tdep.c: Fix common/ includes.
* i386-linux-nat.c: Fix common/ includes.
* i386-go32-tdep.c: Fix common/ includes.
* i386-fbsd-tdep.c: Fix common/ includes.
* i386-fbsd-nat.c: Fix common/ includes.
* guile/scm-type.c: Fix common/ includes.
* guile/guile.c: Fix common/ includes.
* go32-nat.c: Fix common/ includes.
* gnu-nat.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbarch-selftests.c: Fix common/ includes.
* gdb_usleep.c: Fix common/ includes.
* gdb_select.h: Fix common/ includes.
* gdb_bfd.c: Fix common/ includes.
* gcore.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* findvar.c: Fix common/ includes.
* fbsd-nat.c: Fix common/ includes.
* event-top.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* dwarf2read.c: Fix common/ includes.
* dwarf2loc.c: Fix common/ includes.
* dwarf2-frame.c: Fix common/ includes.
* dwarf-index-cache.c: Fix common/ includes.
* dtrace-probe.c: Fix common/ includes.
* disasm-selftests.c: Fix common/ includes.
* defs.h: Fix common/ includes.
* csky-tdep.c: Fix common/ includes.
* cp-valprint.c: Fix common/ includes.
* cp-support.h: Fix common/ includes.
* cp-support.c: Fix common/ includes.
* corelow.c: Fix common/ includes.
* completer.h: Fix common/ includes.
* completer.c: Fix common/ includes.
* compile/compile.c: Fix common/ includes.
* compile/compile-loc2c.c: Fix common/ includes.
* compile/compile-cplus-types.c: Fix common/ includes.
* compile/compile-cplus-symbols.c: Fix common/ includes.
* command.h: Fix common/ includes.
* cli/cli-dump.c: Fix common/ includes.
* cli/cli-cmds.c: Fix common/ includes.
* charset.c: Fix common/ includes.
* build-id.c: Fix common/ includes.
* btrace.h: Fix common/ includes.
* btrace.c: Fix common/ includes.
* breakpoint.h: Fix common/ includes.
* breakpoint.c: Fix common/ includes.
* ax.h:
(enum agent_op): Fix common/ includes.
* ax-general.c (struct aop_map): Fix common/ includes.
* ax-gdb.c: Fix common/ includes.
* auxv.c: Fix common/ includes.
* auto-load.c: Fix common/ includes.
* arm-tdep.c: Fix common/ includes.
* arch/riscv.c: Fix common/ includes.
* arch/ppc-linux-common.c: Fix common/ includes.
* arch/i386.c: Fix common/ includes.
* arch/arm.c: Fix common/ includes.
* arch/arm-linux.c: Fix common/ includes.
* arch/arm-get-next-pcs.c: Fix common/ includes.
* arch/amd64.c: Fix common/ includes.
* arch/aarch64.c: Fix common/ includes.
* arch/aarch64-insn.c: Fix common/ includes.
* arch-utils.c: Fix common/ includes.
* amd64-windows-tdep.c: Fix common/ includes.
* amd64-tdep.c: Fix common/ includes.
* amd64-sol2-tdep.c: Fix common/ includes.
* amd64-obsd-tdep.c: Fix common/ includes.
* amd64-nbsd-tdep.c: Fix common/ includes.
* amd64-linux-tdep.c: Fix common/ includes.
* amd64-linux-nat.c: Fix common/ includes.
* amd64-fbsd-tdep.c: Fix common/ includes.
* amd64-fbsd-nat.c: Fix common/ includes.
* amd64-dicos-tdep.c: Fix common/ includes.
* amd64-darwin-tdep.c: Fix common/ includes.
* agent.c: Fix common/ includes.
* ada-lang.h: Fix common/ includes.
* ada-lang.c: Fix common/ includes.
* aarch64-tdep.c: Fix common/ includes.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* win32-low.c: Fix common/ includes.
* win32-i386-low.c: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* thread-db.c: Fix common/ includes.
* target.h: Fix common/ includes.
* symbol.c: Fix common/ includes.
* spu-low.c: Fix common/ includes.
* server.h: Fix common/ includes.
* server.c: Fix common/ includes.
* remote-utils.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* nto-x86-low.c: Fix common/ includes.
* notif.h: Fix common/ includes.
* mem-break.h: Fix common/ includes.
* lynx-low.c: Fix common/ includes.
* lynx-i386-low.c: Fix common/ includes.
* linux-x86-tdesc-selftest.c: Fix common/ includes.
* linux-x86-low.c: Fix common/ includes.
* linux-low.c: Fix common/ includes.
* inferiors.h: Fix common/ includes.
* i387-fp.c: Fix common/ includes.
* hostio.c: Fix common/ includes.
* hostio-errno.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbreplay.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* ax.c:
(enum gdb_agent_op): Fix common/ includes.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
As reported by Jan, we get this error when building with -D_GLIBCXX_DEBUG:
/usr/include/c++/7/debug/safe_iterator.h:297:
Error: attempt to increment a singular iterator.
Objects involved in the operation:
iterator "this" @ 0x0x7fffffffd140 {
type = __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<char, gdb::xfree_deleter<char> >*, std::__cxx1998::vector<std::unique_ptr<char, gdb::xfree_deleter<char> >, std::allocator<std::unique_ptr<char, gdb::xfree_deleter<char> > > > >, std::__debug::vector<std::unique_ptr<char, gdb::xfree_deleter<char> >, std::allocator<std::unique_ptr<char, gdb::xfree_deleter<char> > > > > (mutable iterator);
state = singular;
references sequence with type 'std::__debug::vector<std::unique_ptr<char, gdb::xfree_deleter<char> >, std::allocator<std::unique_ptr<char, gdb::xfree_deleter<char> > > >' @ 0x0x265db40
}
The bug was introduced by commit
commit e80aaf6183c6692ecc167bf26cbdc53f8f1a55f0
Author: Simon Marchi <simon.marchi@polymtl.ca>
Date: Fri Mar 2 23:22:06 2018 -0500
Make delim_string_to_char_ptr_vec return an std::vector
The problem is that we iterate using a range-based for on a vector to
which we push in the loop. Pushing to the vector invalidates the
iterator used in the loop. Instead, change the code to iterate by index
as was done in the previous code.
gdb/ChangeLog:
* auto-load.c (auto_load_safe_path_vec_update): Iterate by
index.
|
|
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
|
|
This replaces some manual string manipulation in
auto_load_objfile_script_1 with std::string, simplifying the code and
allowing the removal of some cleanups.
Tested by the buildbot.
2018-03-17 Tom Tromey <tom@tromey.com>
* auto-load.c (auto_load_objfile_script_1): Use std::string.
|
|
This patch makes delim_string_to_char_ptr_vec and all related functions
use std::vector of gdb::unique_xmalloc_ptr. This allows getting rid of
make_cleanup_free_char_ptr_vec. Returning a vector of
unique_xmalloc_ptr instead of std::string allows to minimize the impacts
on the calling code. We can evaluate later whether we could/should
return a vector of std::strings instead.
gdb/ChangeLog:
* common/gdb_vecs.h (make_cleanup_free_char_ptr_vec): Remove.
(delim_string_to_char_ptr_vec): Return std::vector of
gdb::unique_xmalloc_ptr.
(dirnames_to_char_ptr_vec_append): Take std::vector of
gdb::unique_xmalloc_ptr.
(dirnames_to_char_ptr_vec): Return std::vector of
gdb::unique_xmalloc_ptr.
* common/gdb_vecs.c (delim_string_to_char_ptr_vec_append):
Take std::vector of gdb::unique_xmalloc_ptr, adjust the code.
(delim_string_to_char_ptr_vec): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(dirnames_to_char_ptr_vec_append): Take an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(dirnames_to_char_ptr_vec): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
* auto-load.c (auto_load_safe_path_vec): Change type to
std::vector of gdb::unique_xmalloc_ptr.
(auto_load_expand_dir_vars): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(auto_load_safe_path_vec_update): Adjust.
(filename_is_in_auto_load_safe_path_vec): Adjust.
(auto_load_objfile_script_1): Adjust.
* build-id.c (build_id_to_debug_bfd): Adjust.
* linux-thread-db.c (thread_db_load_search): Adjust.
* source.c (add_path): Adjust.
(openp): Adjust.
* symfile.c (find_separate_debug_file): Adjust.
* utils.c (do_free_char_ptr_vec): Remove.
(make_cleanup_free_char_ptr_vec): Remove.
gdb/gdbserver/ChangeLog:
* server.c (parse_debug_format_options): Adjust to
delim_string_to_char_ptr_vec changes.
* thread-db.c (thread_db_load_search): Adjust to
dirnames_to_char_ptr_vec changes.
|
|
This commit moves the path manipulation routines found on utils.c to a
new common/pathstuff.c, and updates the Makefile.in's accordingly.
The routines moved are "gdb_realpath", "gdb_realpath_keepfile" and
"gdb_abspath".
This will be needed because gdbserver will have to call "gdb_abspath"
on my next patch, which implements a way to expand the path of the
inferior provided by the user in order to allow specifying just the
binary name when starting gdbserver, like:
$ gdbserver :1234 a.out
With the recent addition of the startup-with-shell feature on
gdbserver, this scenario doesn't work anymore if the user doesn't have
the current directory listed in the PATH variable.
I had to do a minor adjustment on "gdb_abspath" because we don't have
access to "tilde_expand" on gdbserver, so now the function is using
"gdb_tilde_expand" instead. Otherwise, the code is the same.
Regression tested on the BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (COMMON_SFILES): Add "common/pathstuff.c".
(HFILES_NO_SRCDIR): Add "common/pathstuff.h".
* auto-load.c: Include "common/pathstuff.h".
* common/common-def.h (current_directory): Move here.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up): New
function.
* common/gdb_tilde_expand.h (gdb_tilde_expand_up): New
prototype.
* common/pathstuff.c: New file.
* common/pathstuff.h: New file.
* compile/compile.c: Include "common/pathstuff.h".
* defs.h (current_directory): Move to "common/common-defs.h".
* dwarf2read.c: Include "common/pathstuff.h".
* exec.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* linux-thread-db.c: Likewise.
* main.c: Likewise.
* nto-tdep.c: Likewise.
* objfiles.c: Likewise.
* source.c: Likewise.
* symtab.c: Likewise.
* utils.c: Include "common/pathstuff.h".
(gdb_realpath): Move to "common/pathstuff.c".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
* utils.h (gdb_realpath): Move to "common/pathstuff.h".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "$(srcdir)/common/pathstuff.c".
(OBJS): Add "pathstuff.o".
* server.c (current_directory): New global variable.
(captured_main): Initialize "current_directory".
|
|
This changes auto_load_section_scripts to use gdb::unique_xmalloc_ptr,
allowing the removal of a cleanup.
2018-02-09 Tom Tromey <tom@tromey.com>
* auto-load.c (auto_load_section_scripts): Use
gdb::unique_xmalloc_ptr.
|
|
This changes execute_script_contents to use a std::string, allowing
the removal of a cleanup.
2018-02-09 Tom Tromey <tom@tromey.com>
* auto-load.c (execute_script_contents): Use std::string.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
This patch removes some unused variables, found with -Wunused. I have
not removed everything reported by -Wunused, because some expressions
such as
struct type *arg_type = check_typedef (value_type);
in bfin-tdep.c could have an unexpected but important side-effect. I
removed others that I considered more low-risk, such as:
struct gdbarch *gdbarch = get_objfile_arch (objfile);
I tested building with Python 2/Python 3/no Python, with/without expat,
with/without libipt and with/without babeltrace.
gdb/ChangeLog:
* ada-lang.c (ada_collect_symbol_completion_matches): Remove
unused variables.
(ada_is_redundant_range_encoding): Likewise.
* ada-varobj.c (ada_varobj_get_value_of_array_variable):
Likewise.
* alpha-tdep.c (alpha_software_single_step): Likewise.
* arm-tdep.c (_initialize_arm_tdep): Likewise.
* auto-load.c (info_auto_load_cmd): Likewise.
* break-catch-syscall.c (insert_catch_syscall): Likewise.
(remove_catch_syscall): Likewise.
* breakpoint.c (condition_completer): Likewise.
(clear_command): Likewise.
(update_breakpoint_locations): Likewise.
* btrace.c (btrace_disable): Likewise.
(btrace_teardown): Likewise.
(btrace_maint_update_pt_packets): Likewise.
(maint_btrace_clear_cmd): Likewise.
* cli/cli-decode.c (lookup_cmd_1): Likewise.
(lookup_cmd_composition): Likewise.
* cli/cli-dump.c (scan_filename): Likewise.
(restore_command): Likewise.
* compile/compile-loc2c.c (compute_stack_depth): Likewise.
* compile/compile-object-load.c (compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (compile_to_object): Likewise.
* completer.c (filename_completer): Likewise.
(complete_files_symbols): Likewise.
(complete_expression): Likewise.
* corelow.c (core_open): Likewise.
* ctf.c (ctf_start): Likewise.
(ctf_write_status): Likewise.
(ctf_write_uploaded_tsv): Likewise.
(ctf_write_definition_end): Likewise.
(ctf_open_dir): Likewise.
(ctf_xfer_partial): Likewise.
(ctf_trace_find): Likewise.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Likewise.
* dwarf2loc.c (allocate_piece_closure): Likewise.
(indirect_pieced_value): Likewise.
(dwarf2_evaluate_loc_desc_full): Likewise.
* dwarf2read.c (dw2_expand_marked_cus): Likewise.
(dw2_expand_symtabs_matching): Likewise.
(dw2_map_symbol_filenames): Likewise.
(read_and_check_comp_unit_head): Likewise.
(read_cutu_die_from_dwo): Likewise.
(lookup_dwo_unit): Likewise.
(read_comp_units_from_section): Likewise.
(dwarf2_compute_name): Likewise.
(handle_DW_AT_stmt_list): Likewise.
(create_cus_hash_table): Likewise.
(create_dwp_v2_section): Likewise.
(dwarf2_rnglists_process): Likewise.
(dwarf2_ranges_process): Likewise.
(dwarf2_record_block_ranges): Likewise.
(is_vtable_name): Likewise.
(read_formatted_entries): Likewise.
(skip_form_bytes): Likewise.
* elfread.c (elf_symtab_read): Likewise.
* exec.c (exec_file_command): Likewise.
* f-valprint.c (f_val_print): Likewise.
(info_common_command_for_block): Likewise.
* guile/guile.c (initialize_scheme_side): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-cmd.c (cmdscm_completer): Likewise.
(gdbscm_register_command_x): Likewise.
* guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
* guile/scm-param.c (gdbscm_parameter_value): Likewise.
* guile/scm-ports.c (file_port_magic): Likewise.
* guile/scm-pretty-print.c (ppscm_search_pp_list): Likewise.
(ppscm_pretty_print_one_value): Likewise.
(ppscm_print_children): Likewise.
* guile/scm-string.c (gdbscm_string_to_argv): Likewise.
* guile/scm-symtab.c (gdbscm_sal_symtab): Likewise.
* guile/scm-type.c (gdbscm_type_next_field_x): Likewise.
* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
* i386-tdep.c (i386_register_reggroup_p): Likewise.
* infcmd.c (run_command_1): Likewise.
(until_next_fsm_clean_up): Likewise.
* linespec.c (linespec_complete): Likewise.
(find_label_symbols): Likewise.
* m2-valprint.c (m2_val_print): Likewise.
* memattr.c (require_user_regions): Likewise.
(lookup_mem_region): Likewise.
(disable_mem_command): Likewise.
(mem_delete): Likewise.
* mep-tdep.c (mep_register_name): Likewise.
(mep_analyze_prologue): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Likewise.
* mi/mi-interp.c (mi_on_sync_execution_done): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* microblaze-linux-tdep.c (microblaze_linux_init_abi): Likewise.
* minidebug.c (lzma_open): Likewise.
* minsyms.c (lookup_minimal_symbol): Likewise.
* mips-linux-tdep.c (mips64_fill_fpregset): Likewise.
* mips-tdep.c (mips_stub_frame_sniffer): Likewise.
(mips_o64_return_value): Likewise.
(mips_single_step_through_delay): Likewise.
(_initialize_mips_tdep): Likewise.
* nios2-tdep.c (nios2_push_dummy_call): Likewise.
(nios2_software_single_step): Likewise.
* parse.c (find_minsym_type_and_address): Likewise.
* psymtab.c (psym_relocate): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
(gdbpy_breakpoint_modified): Likewise.
* python/py-infevents.c (create_inferior_call_event_object):
Likewise.
* python/py-record-btrace.c (btpy_list_item): Likewise.
* python/py-type.c (typy_str): Likewise.
* python/py-value.c (valpy_call): Likewise.
* python/python.c (do_start_initialization): Likewise.
* record-btrace.c (record_btrace_insn_history_range): Likewise.
(record_btrace_call_history_range): Likewise.
(record_btrace_record_method): Likewise.
(record_btrace_xfer_partial): Likewise.
(btrace_get_frame_function): Likewise.
* record-full.c (record_full_open): Likewise.
* record.c (get_context_size): Likewise.
* registry.h (DEFINE_REGISTRY): Likewise.
* remote-fileio.c (remote_fileio_request): Likewise.
* remote.c (remote_update_thread_list): Likewise.
(remote_check_symbols): Likewise.
(remote_commit_resume): Likewise.
(remote_interrupt): Likewise.
(remote_insert_breakpoint): Likewise.
(compare_sections_command): Likewise.
* rust-exp.y (super_name): Likewise.
(lex_string): Likewise.
(convert_ast_to_type): Likewise.
(convert_ast_to_expression): Likewise.
* rust-lang.c (rust_print_struct_def): Likewise.
(rust_print_type): Likewise.
(rust_evaluate_subexp): Likewise.
* rx-tdep.c (rx_register_type): Likewise.
* ser-event.c (serial_event_clear): Likewise.
* serial.c (serial_open): Likewise.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
* symfile.c (section_is_overlay): Likewise.
(overlay_unmapped_address): Likewise.
(overlay_mapped_address): Likewise.
(simple_overlay_update_1): Likewise.
(simple_overlay_update): Likewise.
* symtab.c (symbol_find_demangled_name): Likewise.
(search_symbols): Likewise.
* target-descriptions.c (tdesc_predefined_type): Likewise.
* target.c (target_commit_resume): Likewise.
* thread.c (print_selected_thread_frame): Likewise.
* top.c (new_ui_command): Likewise.
(gdb_readline_no_editing): Likewise.
* tracefile-tfile.c (tfile_open): Likewise.
* tracepoint.c (create_tsv_from_upload): Likewise.
* utils.c (quit): Likewise.
(defaulted_query): Likewise.
* valarith.c (value_concat): Likewise.
* xml-syscall.c (xml_list_syscalls_by_group): Likewise.
* xml-tdesc.c (target_fetch_description_xml): Likewise.
* xtensa-tdep.c (xtensa_pseudo_register_read): Likewise.
(xtensa_pseudo_register_write): Likewise.
gdb/gdbserver/ChangeLog:
* regcache.c (registers_to_string): Remove unused variable.
|
|
This constifies the add_setshow_* family of functions, and then fixes
up the fallout. The bulk of this patch was written by script.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* ada-lang.c (catch_ada_exception_command): Constify.
(catch_assert_command): Constify.
* break-catch-throw.c (catch_catch_command, catch_throw_command)
(catch_rethrow_command): Constify.
(catch_exception_command_1): Constify.
* breakpoint.h (add_catch_command): Constify.
* break-catch-syscall.c (catch_syscall_command_1): Constify.
(catch_syscall_split_args): Constify.
* break-catch-sig.c (catch_signal_command): Constify.
(catch_signal_split_args): Constify.
* cli/cli-decode.h (struct cmd_list_element) <function>: Use
cmd_const_sfunc_ftype.
* cli/cli-decode.c (add_setshow_cmd_full): Constify.
(add_setshow_enum_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_filename_cmd)
(add_setshow_string_cmd, struct cmd_list_element)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd):
Constify.
(set_cmd_sfunc): Constify.
(empty_sfunc): Constify.
* command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_filename_cmd)
(add_setshow_string_cmd, add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Constify.
(set_cmd_sfunc): Constify.
(cmd_sfunc_ftype): Remove.
* compile/compile.c (set_compile_args): Constify.
* infrun.c (set_disable_randomization): Constify.
* infcmd.c (set_args_command, set_cwd_command): Constify.
* breakpoint.c (set_condition_evaluation_mode): Constify.
(add_catch_command): Constify.
(catch_fork_command_1, catch_exec_command_1)
(catch_load_command_1, catch_unload_command_1): Constify.
(catch_load_or_unload): Constify.
* guile/scm-param.c (pascm_set_func): Constify.
(add_setshow_generic): Constify.
* python/py-param.c (get_set_value): Constify.
* top.h (set_verbose): Constify.
* tui/tui-win.c (tui_set_var_cmd): Constify.
* mi/mi-main.c (set_mi_async_command): Constify.
* cli/cli-logging.c (set_logging_overwrite)
(set_logging_redirect): Constify.
* value.c (set_max_value_size): Constify.
* valprint.c (set_input_radix, set_output_radix): Constify.
* utils.c (set_width_command, set_height_command): Constify.
* typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify.
* tracepoint.c (set_disconnected_tracing)
(set_circular_trace_buffer, set_trace_buffer_size)
(set_trace_user, set_trace_notes, set_trace_stop_notes): Constify.
* top.c (set_history_size_command, set_verbose, set_editing)
(set_gdb_datadir, set_history_filename): Constify.
* target.c (set_targetdebug, maint_set_target_async_command)
(maint_set_target_non_stop_command, set_target_permissions)
(set_write_memory_permission): Constify.
(open_target): Constify.
* target-descriptions.c (set_tdesc_filename_cmd): Constify.
* target-dcache.c (set_stack_cache, set_code_cache): Constify.
* symtab.c (set_symbol_cache_size_handler): Constify.
* symfile.c (set_ext_lang_command): Constify.
* symfile-debug.c (set_debug_symfile): Constify.
* source.c (set_directories_command): Constify.
* solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify.
* serial.c (set_parity): Constify.
* rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify.
* remote.c (set_remote_exec_file, set_remotebreak)
(set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify.
* record.c (set_record_insn_history_size)
(set_record_call_history_size): Constify.
* record-full.c (set_record_full_insn_max_num): Constify.
* proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify.
* osabi.c (set_osabi): Constify.
* mips-tdep.c (set_mips64_transfers_32bit_regs)
(reinit_frame_cache_sfunc, mips_abi_update): Constify.
* maint.c (maintenance_set_profile_cmd): Constify.
* linux-thread-db.c (set_libthread_db_search_path): Constify.
* language.c (set_language_command, set_range_command)
(set_case_command): Constify.
* infrun.c (set_non_stop, set_observer_mode)
(set_stop_on_solib_events, set_schedlock_func)
(set_exec_direction_func): Constify.
* infcmd.c (set_inferior_tty_command): Constify.
* disasm.c (set_disassembler_options_sfunc): Constify.
* demangle.c (set_demangling_command): Constify.
* dcache.c (set_dcache_size, set_dcache_line_size): Constify.
* cris-tdep.c (set_cris_version, set_cris_mode)
(set_cris_dwarf2_cfi): Constify.
* corefile.c (set_gnutarget_command): Constify.
* charset.c (set_host_charset_sfunc, set_target_charset_sfunc)
(set_target_wide_charset_sfunc): Constify.
* breakpoint.c (update_dprintf_commands): Constify.
* auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify.
* arm-tdep.c (set_fp_model_sfunc, arm_set_abi)
(set_disassembly_style_sfunc): Constify.
* arch-utils.c (set_endian, set_architecture): Constify.
* alpha-tdep.c (reinit_frame_cache_sfunc): Constify.
* agent.c (set_can_use_agent): Constify.
|
|
This removes cmd_cfunc_ftype and the non-const overload of add_cmd;
then fixes up the fallout.
For the most part this patch is straightforward. There are a few
files (go32-nat.c, windows-nat.c, and gnu-nat.c) that I could not
compile; so I made a best effort there.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* go32-nat.c (go32_sysinfo, go32_sldt, go32_sgdt, go32_sidt)
(go32_pde, go32_pte, go32_pte_for_address): Constify.
* gnu-nat.c (_parse_bool_arg, show_thread_default_pause_cmd)
(set_thread_default_pause_cmd, set_thread_default_run_cmd)
(show_thread_default_run_cmd, set_thread_default_detach_sc_cmd)
(parse_int_arg, show_thread_default_detach_sc_cmd)
(set_signals_cmd, show_signals_cmd, set_sig_thread_cmd)
(show_sig_thread_cmd, set_stopped_cmd, show_stopped_cmd)
(set_exceptions_cmd, show_exceptions_cmd, set_task_pause_cmd)
(show_task_pause_cmd, set_task_detach_sc_cmd)
(show_task_detach_sc_cmd, set_task_exc_port_cmd)
(set_noninvasive_cmd, set_thread_pause_cmd)
(show_thread_pause_cmd, set_thread_run_cmd, show_thread_run_cmd)
(set_thread_detach_sc_cmd, show_thread_detach_sc_cmd)
(set_thread_exc_port_cmd, thread_takeover_sc_cmd): Constify.
* windows-nat.c (display_selectors): Constify.
* cli/cli-decode.h (struct cmd_list_element) <function>: Remove
non-const "cfunc".
* cli/cli-decode.c (set_cmd_cfunc): Remove non-const overload.
(cmd_cfunc_eq): Likewise.
(struct cmd_list_element): Likewise.
(do_cfunc): Remove.
(cli_user_command_p): Update.
* command.h (add_cmd): Remove non-const overload.
(cmd_cfunc_ftype): Remove typedef.
(cmd_cfunc_eq): Remove non-const overload.
* value.c (show_values): Constify.
* thread.c (thread_apply_all_command): Constify.
* symfile.c (load_command): Constify.
* source.c (directory_command): Constify.
* maint.c (maintenance_internal_error)
(maintenance_demangler_warning, maintenance_space_display)
(maintenance_print_architecture, maintenance_translate_address)
(maintenance_info_selftests, maintenance_internal_warning):
Constify.
* breakpoint.c (disable_trace_command, enable_trace_command):
Constify.
* auto-load.c (info_auto_load_local_gdbinit, add_auto_load_dir):
Constify.
(add_auto_load_safe_path): Constify.
* guile/scm-auto-load.c (info_auto_load_guile_scripts): Constify.
* top.h (show_commands): Constify.
* linux-thread-db.c (info_auto_load_libthread_db): Constify.
* sparc64-tdep.c (adi_examine_command): Constify.
(adi_assign_command): Constify.
|
|
This patch constifies add_info and updates all the info commands. The
bulk of this patch was written using a script; and then I did a manual
pass to fix up the remaining compilation errors.
I could not compile every changed file; in particular nto-procfs.c,
gnu-nat.c, and darwin-nat-info.c; but I at least tried to check the
correctness by inspection.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* frame.h (info_locals_command, info_args_command): Constify.
* auto-load.h (auto_load_info_scripts): Constify.
* inferior.h (registers_info): Constify.
* copying.c: Rebuild.
* copying.awk: Constify generated commands.
* auto-load.c (auto_load_info_scripts)
(info_auto_load_gdb_scripts): Constify.
* cli/cli-decode.c (struct cmd_list_element): Take a
cmd_const_cfunc_ftype.
* command.h (add_info): Take a cmd_const_cfunc_ftype.
* tui/tui-win.c (tui_all_windows_info): Constify.
* python/py-auto-load.c (info_auto_load_python_scripts):
Constify.
* cli/cli-cmds.c (show_command): Remove non-const overload.
* tracepoint.c (info_tvariables_command, info_scope_command):
Constify.
(info_static_tracepoint_markers_command): Constify.
* thread.c (info_threads_command): Constify.
(print_thread_info_1): Constify.
* target.c (info_target_command): Constify.
* symtab.c (info_sources_command, info_functions_command)
(info_types_command): Constify.
(info_variables_command): Remove non-const overload.
* symfile.c (info_ext_lang_command): Constify.
* stack.c (info_frame_command, info_locals_command)
(info_args_command): Constify.
(backtrace_command): Remove non-const overload.
* source.c (info_source_command, info_line_command): Constify.
* solib.c (info_sharedlibrary_command): Constify.
* skip.c (info_skip_command): Constify.
* ser-go32.c (info_serial_command): Constify.
* reverse.c (info_bookmarks_command): Constify.
* printcmd.c (info_symbol_command, info_address_command)
(info_display_command): Constify.
* osdata.c (info_osdata_command): Constify.
* objc-lang.c (info_selectors_command, info_classes_command):
Constify.
* nto-procfs.c (procfs_pidlist, procfs_meminfo): Constify.
* memattr.c (info_mem_command): Constify.
* macrocmd.c (info_macro_command, info_macros_command): Constify.
* linux-fork.c (info_checkpoints_command): Constify.
* infrun.c (info_signals_command): Constify.
* inflow.c (info_terminal_command): Constify.
* inferior.c (info_inferiors_command): Constify.
(print_inferior): Constify.
* infcmd.c (info_program_command, info_all_registers_command)
(info_registers_command, info_vector_command)
(info_float_command): Constify.
(registers_info): Constify.
* gnu-nat.c (info_send_rights_cmd, info_recv_rights_cmd)
(info_port_sets_cmd, info_dead_names_cmd, info_port_rights_cmd):
Constify.
* f-valprint.c (info_common_command): Constify.
* dcache.c (info_dcache_command): Constify.
(dcache_info_1): Constify.
* darwin-nat-info.c (info_mach_tasks_command)
(info_mach_task_command, info_mach_ports_command)
(info_mach_port_command, info_mach_threads_command)
(info_mach_thread_command, info_mach_regions_command)
(info_mach_regions_recurse_command, info_mach_region_command)
(info_mach_exceptions_command): Constify.
(get_task_from_args): Constify.
* cp-support.c (info_vtbl_command): Constify.
* breakpoint.c (info_watchpoints_command)
(info_tracepoints_command): Constify.
(info_breakpoints_command): Remove non-const overload.
* avr-tdep.c (avr_io_reg_read_command): Constify.
* auxv.c (info_auxv_command): Constify.
* ada-tasks.c (info_tasks_command): Constify.
(info_task): Constify.
* ada-lang.c (info_exceptions_command): Constify.
|
|
Direct replacement with std::vector. This allows removing a cleanup as
well.
Regtested on the buildbot.
gdb/ChangeLog:
* auto-load.c: Don't include gdb_vecs.h, include algorithm.
(loaded_script_ptr): Remove typedef.
(DEF_VEC_P (loaded_script_ptr)): Remove.
(struct collect_matching_scripts_data): Add constructor.
<scripts_p>: Change type to (pointer to) std::vector.
(collect_matching_scripts_data): Adjust.
(sort_scripts_by_name): Make suitable for std::sort.
(print_scripts): Don't sort vector, adjust to std::vector.
(auto_load_info_scripts): Sort vectors, adjust to std::vector.
|
|
This changes add_prefix_cmd to accept a const-taking function as an
argument; then fixes up all the callers.
In a couple of spots I had to add a non-const overload of a function,
because the function is passed to two different command-adding
"constructors". These overloads are temporary; once constification is
complete they can be removed.
This patch also fixes a typo I happened to notice while constifying.
Note that this touches a couple of files (gnu-nat.c and go32-nat.c)
that I can't build. So, while I made a best-effort there, I am not
certain they will still compile.
Tested by rebuilding.
gdb/ChangeLog
2017-10-11 Tom Tromey <tom@tromey.com>
* gdbthread.h (thread_command): Constify.
* inferior.h (detach_command): Constify.
* top.h (set_history, show_history): Constify.
* arm-tdep.c (set_arm_command, show_arm_command): Constify.
* serial.c (serial_set_cmd, serial_show_cmd): Constify.
* bsd-kvm.c (bsd_kvm_cmd): Constify.
* printcmd.c (set_command): Constify.
(non_const_set_command): New function.
* dcache.c (set_dcache_command, show_dcache_command): Constify.
* breakpoint.c (enable_command, disable_command, delete_command)
(catch_command, tcatch_command, set_breakpoint_cmd)
(show_breakpoint_cmd): Constify.
* macrocmd.c (macro_command): Constify.
* infcmd.c (unset_command, kill_command, detach_command)
(info_proc_cmd): Constify.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Constify.
* auto-load.c (show_auto_load_cmd, set_auto_load_cmd)
(info_auto_load_cmd): Constify.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Constify.
* ada-lang.c (set_ada_command, show_ada_command)
(maint_set_ada_cmd, maint_show_ada_cmd): Constify.
* guile/guile.c (set_guile_command, show_guile_command)
(info_guile_command): Constify.
* tui/tui-win.c (tui_command, set_tui_cmd, show_tui_cmd):
Constify.
* skip.c (skip_command): Constify.
* compile/compile.c (_initialize_compile): Constify.
* dwarf2read.c (set_dwarf_cmd, show_dwarf_cmd): Constify.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd): Constify.
* remote.c (set_remote_cmd, show_remote_cmd, remote_command):
Constify.
* python/python.c (user_show_python, user_set_python): Constify.
* mips-tdep.c (set_mips_command, show_mips_command)
(set_mipsfpu_command): Constify.
* record-btrace.c (cmd_record_btrace_start)
(cmd_set_record_btrace, cmd_show_record_btrace)
(cmd_set_record_btrace_bts, cmd_show_record_btrace_bts)
(cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): Constify.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command):
Constify.
* symfile.c (overlay_command): Constify.
* spu-tdep.c (set_spu_command, show_spu_command): Constify.
* cli/cli-logging.c (set_logging_command, show_logging_command):
Constify.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Constify.
* cli/cli-decode.c (struct cmd_list_element): Change type of
"fun".
* cli/cli-cmds.c (info_command, show_command, set_debug)
(show_debug): Constify.
(show_command): Add non-const overload.
* top.c (set_history, show_history): Constify.
* sh-tdep.c (set_sh_command, show_sh_command): Constify.
* command.h (add_prefix_cmd): Accept a cmd_const_cfunc_ftype.
* target.c (target_command): Constify.
* sparc64-tdep.c (info_adi_command): Constify.
* record-full.c (cmd_record_full_start): Constify.
(set_record_full_command): Constify. Fix typo.
(show_record_full_command): Constify.
* thread.c (thread_command, thread_apply_command): Constify.
* memattr.c (dummy_cmd): Constify.
* value.c (function_command): Constify.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Constify.
* probe.c (info_probes_command): Constify.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Constify.
* gnu-nat.c (set_task_cmd, show_task_cmd, set_thread_cmd)
(show_thread_cmd, set_thread_default_cmd)
(show_thread_default_cmd): Constify.
(check_empty): Constify.
* tracepoint.c (tfind_command): Constify.
* cp-support.c (maint_cplus_command): Constify.
* windows-tdep.c (info_w32_command): Constify.
* record.c (cmd_record_start, set_record_command)
(show_record_command, info_record_command, cmd_record_goto):
Constify.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Constify.
* utils.c (set_internal_problem_cmd, show_internal_problem_cmd):
Constify.
(add_internal_problem_command): Remove casts.
* arc-tdep.c (maintenance_print_arc_command): Constify.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Constify.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd)
(maintenance_show_cmd, set_per_command_cmd)
(show_per_command_cmd, maintenance_check_command): Constify.
* language.c (set_check, show_check): Constify.
* typeprint.c (show_print_type, set_print_type): Constify.
* go32-nat.c (go32_info_dos_command): Constify.
|
|
These prototypes were required when compiling GDB as C but are not
required for C++.
gdb/ChangeLog:
* aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat
prototype.
* aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep
prototype.
* aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep
prototype.
* aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype.
* ada-exp.y: Remove _initialize_ada_exp prototype.
* ada-lang.c: Remove _initialize_ada_language prototype.
* ada-tasks.c: Remove _initialize_tasks prototype.
* addrmap.c: Remove _initialize_addrmap prototype.
* agent.c: Remove _initialize_agent prototype.
* aix-thread.c: Remove _initialize_aix_thread prototype.
* alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype.
* alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype.
* alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep
prototype.
* alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype.
* alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype.
* alpha-tdep.c: Remove _initialize_alpha_tdep prototype.
* amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep
prototype.
* amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep
prototype.
* amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype.
* amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype.
* amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype.
* amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep
prototype.
* amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype.
* amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype.
* amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype.
* amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype.
* amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* amd64-tdep.c: Remove _initialize_amd64_tdep prototype.
* amd64-windows-nat.c: Remove _initialize_amd64_windows_nat
prototype.
* amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep
prototype.
* annotate.c: Remove _initialize_annotate prototype.
* arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype.
* arc-tdep.c: Remove _initialize_arc_tdep prototype.
* arch-utils.c: Remove _initialize_gdbarch_utils prototype.
* arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype.
* arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype.
* arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype.
* arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype.
* arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep
prototype.
* arm-tdep.c: Remove _initialize_arm_tdep prototype.
* arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype.
* auto-load.c: Remove _initialize_auto_load prototype.
* auxv.c: Remove _initialize_auxv prototype.
* avr-tdep.c: Remove _initialize_avr_tdep prototype.
* ax-gdb.c: Remove _initialize_ax_gdb prototype.
* bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype.
* bfin-tdep.c: Remove _initialize_bfin_tdep prototype.
* break-catch-sig.c: Remove _initialize_break_catch_sig prototype.
* break-catch-syscall.c: Remove _initialize_break_catch_syscall
prototype.
* break-catch-throw.c: Remove _initialize_break_catch_throw
prototype.
* breakpoint.c: Remove _initialize_breakpoint prototype.
* bsd-uthread.c: Remove _initialize_bsd_uthread prototype.
* btrace.c: Remove _initialize_btrace prototype.
* charset.c: Remove _initialize_charset prototype.
* cli/cli-cmds.c: Remove _initialize_cli_cmds prototype.
* cli/cli-dump.c: Remove _initialize_cli_dump prototype.
* cli/cli-interp.c: Remove _initialize_cli_interp prototype.
* cli/cli-logging.c: Remove _initialize_cli_logging prototype.
* cli/cli-script.c: Remove _initialize_cli_script prototype.
* coff-pe-read.c: Remove _initialize_coff_pe_read prototype.
* coffread.c: Remove _initialize_coffread prototype.
* compile/compile.c: Remove _initialize_compile prototype.
* complaints.c: Remove _initialize_complaints prototype.
* completer.c: Remove _initialize_completer prototype.
* copying.awk: Remove _initialize_copying prototype.
* copying.c: Regenerate.
* core-regset.c: Remove _initialize_core_regset prototype.
* corefile.c: Remove _initialize_core prototype.
* corelow.c: Remove _initialize_corelow prototype.
* cp-abi.c: Remove _initialize_cp_abi prototype.
* cp-namespace.c: Remove _initialize_cp_namespace prototype.
* cp-support.c: Remove _initialize_cp_support prototype.
* cp-valprint.c: Remove _initialize_cp_valprint prototype.
* cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype.
* cris-tdep.c: Remove _initialize_cris_tdep prototype.
* ctf.c: Remove _initialize_ctf prototype.
* d-lang.c: Remove _initialize_d_language prototype.
* darwin-nat-info.c: Remove _initialize_darwin_info_commands
prototype.
* darwin-nat.c: Remove _initialize_darwin_inferior prototype.
* dbxread.c: Remove _initialize_dbxread prototype.
* dcache.c: Remove _initialize_dcache prototype.
* demangle.c: Remove _initialize_demangler prototype.
* disasm-selftests.c: Remove _initialize_disasm_selftests
prototype.
* disasm.c: Remove _initialize_disasm prototype.
* dtrace-probe.c: Remove _initialize_dtrace_probe prototype.
* dummy-frame.c: Remove _initialize_dummy_frame prototype.
* dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame
prototype.
* dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype.
* dwarf2expr.c: Remove _initialize_dwarf2expr prototype.
* dwarf2loc.c: Remove _initialize_dwarf2loc prototype.
* dwarf2read.c: Remove _initialize_dwarf2_read prototype.
* elfread.c: Remove _initialize_elfread prototype.
* exec.c: Remove _initialize_exec prototype.
* extension.c: Remove _initialize_extension prototype.
* f-lang.c: Remove _initialize_f_language prototype.
* f-valprint.c: Remove _initialize_f_valprint prototype.
* fbsd-nat.c: Remove _initialize_fbsd_nat prototype.
* fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype.
* filesystem.c: Remove _initialize_filesystem prototype.
* findcmd.c: Remove _initialize_mem_search prototype.
* fork-child.c: Remove _initialize_fork_child prototype.
* frame-base.c: Remove _initialize_frame_base prototype.
* frame-unwind.c: Remove _initialize_frame_unwind prototype.
* frame.c: Remove _initialize_frame prototype.
* frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype.
* frv-tdep.c: Remove _initialize_frv_tdep prototype.
* ft32-tdep.c: Remove _initialize_ft32_tdep prototype.
* gcore.c: Remove _initialize_gcore prototype.
* gdb_bfd.c: Remove _initialize_gdb_bfd prototype.
* gdbarch.c: Regenerate.
* gdbarch.sh: Remove _initialize_gdbarch prototype.
* gdbtypes.c: Remove _initialize_gdbtypes prototype.
* gnu-nat.c: Remove _initialize_gnu_nat prototype.
* gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype.
* gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype.
* go-lang.c: Remove _initialize_go_language prototype.
* go32-nat.c: Remove _initialize_go32_nat prototype.
* guile/guile.c: Remove _initialize_guile prototype.
* h8300-tdep.c: Remove _initialize_h8300_tdep prototype.
* hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype.
* hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype.
* hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype.
* hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype.
* hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype.
* hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype.
* hppa-tdep.c: Remove _initialize_hppa_tdep prototype.
* i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype.
* i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep
prototype.
* i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep
prototype.
* i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype.
* i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype.
* i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype.
* i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype.
* i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype.
* i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype.
* i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype.
* i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype.
* i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype.
* i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype.
* i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype.
* i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype.
* i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype.
* i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* i386-tdep.c: Remove _initialize_i386_tdep prototype.
* i386-windows-nat.c: Remove _initialize_i386_windows_nat
prototype.
* ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame
prototype.
* ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype.
* ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype.
* ia64-tdep.c: Remove _initialize_ia64_tdep prototype.
* ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype.
* infcall.c: Remove _initialize_infcall prototype.
* infcmd.c: Remove _initialize_infcmd prototype.
* inferior.c: Remove _initialize_inferiors prototype.
* inflow.c: Remove _initialize_inflow prototype.
* infrun.c: Remove _initialize_infrun prototype.
* interps.c: Remove _initialize_interpreter prototype.
* iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype.
* jit.c: Remove _initialize_jit prototype.
* language.c: Remove _initialize_language prototype.
* linux-fork.c: Remove _initialize_linux_fork prototype.
* linux-nat.c: Remove _initialize_linux_nat prototype.
* linux-tdep.c: Remove _initialize_linux_tdep prototype.
* linux-thread-db.c: Remove _initialize_thread_db prototype.
* lm32-tdep.c: Remove _initialize_lm32_tdep prototype.
* m2-lang.c: Remove _initialize_m2_language prototype.
* m32c-tdep.c: Remove _initialize_m32c_tdep prototype.
* m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype.
* m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype.
* m32r-tdep.c: Remove _initialize_m32r_tdep prototype.
* m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype.
* m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-tdep.c: Remove _initialize_m68k_tdep prototype.
* m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* machoread.c: Remove _initialize_machoread prototype.
* macrocmd.c: Remove _initialize_macrocmd prototype.
* macroscope.c: Remove _initialize_macroscope prototype.
* maint.c: Remove _initialize_maint_cmds prototype.
* mdebugread.c: Remove _initialize_mdebugread prototype.
* memattr.c: Remove _initialize_mem prototype.
* mep-tdep.c: Remove _initialize_mep_tdep prototype.
* mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype.
* mi/mi-cmds.c: Remove _initialize_mi_cmds prototype.
* mi/mi-interp.c: Remove _initialize_mi_interp prototype.
* mi/mi-main.c: Remove _initialize_mi_main prototype.
* microblaze-linux-tdep.c: Remove
_initialize_microblaze_linux_tdep prototype.
* microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype.
* mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype.
* mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype.
* mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype.
* mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype.
* mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype.
* mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype.
* mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype.
* mips-tdep.c: Remove _initialize_mips_tdep prototype.
* mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype.
* mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep
prototype.
* mipsread.c: Remove _initialize_mipsread prototype.
* mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep
prototype.
* mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype.
* moxie-tdep.c: Remove _initialize_moxie_tdep prototype.
* msp430-tdep.c: Remove _initialize_msp430_tdep prototype.
* mt-tdep.c: Remove _initialize_mt_tdep prototype.
* nds32-tdep.c: Remove _initialize_nds32_tdep prototype.
* nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep
prototype.
* nios2-tdep.c: Remove _initialize_nios2_tdep prototype.
* nto-procfs.c: Remove _initialize_procfs prototype.
* nto-tdep.c: Remove _initialize_nto_tdep prototype.
* objc-lang.c: Remove _initialize_objc_language prototype.
* objfiles.c: Remove _initialize_objfiles prototype.
* observer.c: Remove observer_test_first_notification_function,
observer_test_second_notification_function,
observer_test_third_notification_function, and
_initialize_observer prototypes.
* opencl-lang.c: Remove _initialize_opencl_language prototypes.
* osabi.c: Remove _initialize_gdb_osabi prototype.
* osdata.c: Remove _initialize_osdata prototype.
* p-valprint.c: Remove _initialize_pascal_valprint prototype.
* parse.c: Remove _initialize_parse prototype.
* ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype.
* ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype.
* ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype.
* ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype.
* ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype.
* ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype.
* ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype.
* ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype.
* printcmd.c: Remove _initialize_printcmd prototype.
* probe.c: Remove _initialize_probe prototype.
* proc-api.c: Remove _initialize_proc_api prototype.
* proc-events.c: Remove _initialize_proc_events prototype.
* proc-service.c: Remove _initialize_proc_service prototype.
* procfs.c: Remove _initialize_procfs prototype.
* psymtab.c: Remove _initialize_psymtab prototype.
* python/python.c: Remove _initialize_python prototype.
* ravenscar-thread.c: Remove _initialize_ravenscar prototype.
* record-btrace.c: Remove _initialize_record_btrace prototype.
* record-full.c: Remove _initialize_record_full prototype.
* record.c: Remove _initialize_record prototype.
* regcache.c: Remove _initialize_regcache prototype.
* reggroups.c: Remove _initialize_reggroup prototype.
* remote-notif.c: Remove _initialize_notif prototype.
* remote-sim.c: Remove _initialize_remote_sim prototype.
* remote.c: Remove _initialize_remote prototype.
* reverse.c: Remove _initialize_reverse prototype.
* rl78-tdep.c: Remove _initialize_rl78_tdep prototype.
* rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype.
* rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep
prototype.
* rs6000-nat.c: Remove _initialize_rs6000_nat prototype.
* rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype.
* rust-exp.y: Remove _initialize_rust_exp prototype.
* rx-tdep.c: Remove _initialize_rx_tdep prototype.
* s390-linux-nat.c: Remove _initialize_s390_nat prototype.
* s390-linux-tdep.c: Remove _initialize_s390_tdep prototype.
* score-tdep.c: Remove _initialize_score_tdep prototype.
* selftest-arch.c: Remove _initialize_selftests_foreach_arch
prototype.
* ser-go32.c: Remove _initialize_ser_dos prototype.
* ser-mingw.c: Remove _initialize_ser_windows prototype.
* ser-pipe.c: Remove _initialize_ser_pipe prototype.
* ser-tcp.c: Remove _initialize_ser_tcp prototype.
* ser-unix.c: Remove _initialize_ser_hardwire prototype.
* serial.c: Remove _initialize_serial prototype.
* sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype.
* sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype.
* sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype.
* sh-tdep.c: Remove _initialize_sh_tdep prototype.
* skip.c: Remove _initialize_step_skip prototype.
* sol-thread.c: Remove _initialize_sol_thread prototype.
* solib-aix.c: Remove _initialize_solib_aix prototype.
* solib-darwin.c: Remove _initialize_darwin_solib prototype.
* solib-dsbt.c: Remove _initialize_dsbt_solib prototype.
* solib-frv.c: Remove _initialize_frv_solib prototype.
* solib-spu.c: Remove _initialize_spu_solib prototype.
* solib-svr4.c: Remove _initialize_svr4_solib prototype.
* solib-target.c: Remove _initialize_solib_target prototype.
* solib.c: Remove _initialize_solib prototype.
* source.c: Remove _initialize_source prototype.
* sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype.
* sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep
prototype.
* sparc-nat.c: Remove _initialize_sparc_nat prototype.
* sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype.
* sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype.
* sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep
prototype.
* sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype.
* sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype.
* sparc-tdep.c: Remove _initialize_sparc_tdep prototype.
* sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat
prototype.
* sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep
prototype.
* sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat
prototype.
* sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep
prototype.
* sparc64-nat.c: Remove _initialize_sparc64_nat prototype.
* sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat
prototype.
* sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep
prototype.
* sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat
prototype.
* sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep
prototype.
* sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep
prototype.
* spu-linux-nat.c: Remove _initialize_spu_nat prototype.
* spu-multiarch.c: Remove _initialize_spu_multiarch prototype.
* spu-tdep.c: Remove _initialize_spu_tdep prototype.
* stabsread.c: Remove _initialize_stabsread prototype.
* stack.c: Remove _initialize_stack prototype.
* stap-probe.c: Remove _initialize_stap_probe prototype.
* std-regs.c: Remove _initialize_frame_reg prototype.
* symfile-debug.c: Remove _initialize_symfile_debug prototype.
* symfile-mem.c: Remove _initialize_symfile_mem prototype.
* symfile.c: Remove _initialize_symfile prototype.
* symmisc.c: Remove _initialize_symmisc prototype.
* symtab.c: Remove _initialize_symtab prototype.
* target-dcache.c: Remove _initialize_target_dcache prototype.
* target-descriptions.c: Remove _initialize_target_descriptions
prototype.
* thread.c: Remove _initialize_thread prototype.
* tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep
prototype.
* tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype.
* tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype.
* tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep
prototype.
* tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype.
* tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype.
* tracefile.c: Remove _initialize_tracefile prototype.
* tracepoint.c: Remove _initialize_tracepoint prototype.
* tui/tui-hooks.c: Remove _initialize_tui_hooks prototype.
* tui/tui-interp.c: Remove _initialize_tui_interp prototype.
* tui/tui-layout.c: Remove _initialize_tui_layout prototype.
* tui/tui-regs.c: Remove _initialize_tui_regs prototype.
* tui/tui-stack.c: Remove _initialize_tui_stack prototype.
* tui/tui-win.c: Remove _initialize_tui_win prototype.
* tui/tui.c: Remove _initialize_tui prototype.
* typeprint.c: Remove _initialize_typeprint prototype.
* user-regs.c: Remove _initialize_user_regs prototype.
* utils.c: Remove _initialize_utils prototype.
* v850-tdep.c: Remove _initialize_v850_tdep prototype.
* valarith.c: Remove _initialize_valarith prototype.
* valops.c: Remove _initialize_valops prototype.
* valprint.c: Remove _initialize_valprint prototype.
* value.c: Remove _initialize_values prototype.
* varobj.c: Remove _initialize_varobj prototype.
* vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype.
* vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype.
* vax-tdep.c: Remove _initialize_vax_tdep prototype.
* windows-nat.c: Remove _initialize_windows_nat,
_initialize_check_for_gdb_ini, and _initialize_loadable
prototypes.
* windows-tdep.c: Remove _initialize_windows_tdep prototype.
* xcoffread.c: Remove _initialize_xcoffread prototype.
* xml-support.c: Remove _initialize_xml_support prototype.
* xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype.
* xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat
prototype.
* xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep
prototype.
* xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype.
|
|
This changes gdb_realpath to return a unique_xmalloc_ptr and fixes up
the callers. This allows removing some cleanups. This change by
itself caused xfullpath.exp to fail; and attempting to fix that ran
into various problems (like .get() being optimized out); so this patch
also rewrites xfullpath.exp to be a C++ selftest instead.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* exec.c (exec_file_attach): Update.
* linux-thread-db.c (try_thread_db_load): Update.
* guile/scm-safe-call.c (gdbscm_safe_source_script): Update.
* utils.c (gdb_realpath): Change return type.
(gdb_realpath_keepfile): Update.
(gdb_realpath_check_trailer, gdb_realpath_tests): New functions.
(_initialize_utils): Register the new self test.
* source.c (openp): Update.
(find_and_open_source): Update.
* nto-tdep.c (nto_find_and_open_solib): Update.
* main.c (set_gdb_data_directory): Update.
(captured_main_1): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update
(dw2_map_symbol_filenames): Update.
* auto-load.c (auto_load_safe_path_vec_update): Update.
(filename_is_in_auto_load_safe_path_vec): Change type of
"filename_realp".
(auto_load_objfile_script): Update.
(file_is_auto_load_safe): Update. Use std::string.
* utils.h (gdb_realpath): Return a gdb::unique_xmalloc_ptr.
testsuite/ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* gdb.gdb/xfullpath.exp: Remove.
|
|
This changes find_and_open_script to return a
gdb::optional<open_script>, where open_script is a new type
encapsulating the two return values. The new type helps avoid
cleanups in the callers.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (find_and_open_script): Change return type.
Remove "streamp" and "full_path" parameters.
(source_script_with_search): Update.
* auto-load.c (source_script_file): Update.
* cli/cli-cmds.h (find_and_open_script): Change type.
(open_script): New struct.
|
|
This introduces gdb_file_up, a unique pointer holding a FILE*, and
then changes some code in gdb to use it. In particular
gdb_fopen_cloexec now returns a gdb_file_up. This allow removing some
cleanups.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* xml-support.c (xml_fetch_content_from_file): Update.
* ui-file.c (stdio_file::open): Update.
* tracefile-tfile.c (tfile_start): Update.
* remote.c (remote_file_put, remote_file_get): Update.
* nat/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_get_state, linux_proc_tid_get_name): Update.
* nat/linux-osdata.c (linux_common_core_of_thread): Update.
(command_from_pid, commandline_from_pid, linux_xfer_osdata_cpus)
(print_sockets, linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Update.
* nat/linux-btrace.c (linux_determine_kernel_start): Update.
* linux-nat.c (linux_proc_pending_signals): Update.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_file_up.
(file_closer): Remove.
* compile/compile.c (compile_to_object): Update.
* common/filestuff.h (struct gdb_file_deleter): New.
(gdb_file_up): New typedef.
(gdb_fopen_cloexec): Change return type.
* common/filestuff.c (gdb_fopen_cloexec): Return gdb_file_up.
* cli/cli-dump.c (fopen_with_cleanup): Remove.
(dump_binary_file, restore_binary_file): Update.
* auto-load.c (auto_load_objfile_script_1): Update.
|
|
This introduces ui_out_emit_table, similar to the other existing
ui_out RAII classes, and then uses it in a number of places. This
replaces some cleanups.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* tracepoint.c (tvariables_info_1): Use ui_out_emit_table.
(info_static_tracepoint_markers_command): Likewise.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_table.
* skip.c (skip_info): Use ui_out_emit_table.
* progspace.c (print_program_space): Use ui_out_emit_table.
* osdata.c (info_osdata): Use ui_out_emit_table.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Use
ui_out_emit_table.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_table.
* inferior.c (print_inferior): Use ui_out_emit_table.
* gdb_bfd.c (maintenance_info_bfds): Use ui_out_emit_table.
* breakpoint.c (breakpoint_1): Use ui_out_emit_table.
* auto-load.c (auto_load_info_scripts): Use ui_out_emit_table.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_table.
* ui-out.h (class ui_out_emit_table): New.
|
|
This patch changes various places to use ui_out_emit_tuple,
eliminating a number of cleanups. This patch only tackles "easy"
cases, which are ones where the cleanups in question were
block-structured and did not involve any changes other than the
obvious replacement.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* record-btrace.c (record_btrace_insn_history)
(record_btrace_insn_history_range, record_btrace_call_history)
(record_btrace_call_history_range): Use ui_out_emit_tuple.
* thread.c (do_captured_list_thread_ids, print_thread_info_1): Use
ui_out_emit_tuple.
* stack.c (print_frame_info): Use ui_out_emit_tuple.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple.
* skip.c (skip_info): Use ui_out_emit_tuple.
* remote.c (show_remote_cmd): Use ui_out_emit_tuple.
* progspace.c (print_program_space): Use ui_out_emit_tuple.
* probe.c (info_probes_for_ops): Use ui_out_emit_tuple.
* osdata.c (info_osdata): Use ui_out_emit_tuple.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_tuple.
* mi/mi-main.c (print_one_inferior, list_available_thread_groups)
(output_register, mi_cmd_data_read_memory)
(mi_cmd_data_read_memory_bytes, mi_load_progress)
(mi_cmd_trace_frame_collected): Use ui_out_emit_tuple.
* mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one):
Use ui_out_emit_tuple.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use
ui_out_emit_tuple.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions)
(mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_tuple.
* inferior.c (print_inferior): Use ui_out_emit_tuple.
* gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple.
* disasm.c (do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly): Use ui_out_emit_tuple.
* cp-abi.c (list_cp_abis): Use ui_out_emit_tuple.
* cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple.
* breakpoint.c (print_one_breakpoint_location)
(print_one_breakpoint): Use ui_out_emit_tuple.
* auto-load.c (print_script, info_auto_load_cmd): Use
ui_out_emit_tuple.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple.
|
|
$ gdb rustc
Reading symbols from rustc...Reading symbols from /usr/lib/debug/usr/bin/rustc.debug...done.
done.
warning: Invalid entry in .debug_gdb_scripts section
/usr/bin/rustc
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[15] .debug_gdb_scripts PROGBITS 00000000000008ed 0008ed 000022 00 AMS 0 0 1
/usr/lib/debug/usr/bin/rustc.debug
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[15] .debug_gdb_scripts NOBITS 00000000000008ed 000280 000022 00 AMS 0 0 1
There remains questionable whether bfd_get_section_by_name() should not return
an error for !SEC_LOAD but I haven't investigated that.
gdb/ChangeLog
2017-03-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* auto-load.c (auto_load_section_scripts): Check SEC_HAS_CONTENTS.
gdb/testsuite/ChangeLog
2017-03-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-section-script.exp (sepdebug): New testcases.
|
