aboutsummaryrefslogtreecommitdiff
path: root/gdb/arm-tdep.h
AgeCommit message (Collapse)AuthorFilesLines
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-11-23Normalize names of some source filesSimon Marchi1-1/+1
Most tdep/nat files are named: <cpu>-<os>-tdep.c <cpu>-<os>-nat.c A few files do not respect this scheme. This patch renames them so that they are consistent with the rest of the files. It builds fine with --enable-targets=all, but that doesn't test the nat files. I can only hope that my grep skill is good enough. gdb/ChangeLog: * Makefile.in (ALL_64_TARGET_OBS, ALL_TARGET_OBS, HFILES_NO_SRCDIR, ALLDEPFILES): Rename files. * alphabsd-nat.c: Rename to ... * alpha-bsd-nat.c: ... this, adjust include. * alphabsd-tdep.c: Rename to ... * alpha-bsd-tdep.c: ... this, adjust include. * alphabsd-tdep.h: Rename to ... * alpha-bsd-tdep.h: ... this, adjust include barrier and comment. * alphafbsd-tdep.c: Rename to ... * alpha-fbsd-tdep.c: ... this. * alphanbsd-tdep.c: Rename to ... * alpha-nbsd-tdep.c: ... this, adjust include. * alphaobsd-tdep.c: Rename to ... * alpha-obsd-tdep.c: ... this, adjust include. * amd64bsd-nat.c: Rename to ... * amd64-bsd-nat.c: ... this, adjust include. * amd64fbsd-nat.c: Rename to ... * amd64-fbsd-nat.c: ... this, adjust include. * amd64fbsd-tdep.c: Rename to ... * amd64-fbsd-tdep.c: ... this, adjust include. * amd64nbsd-nat.c: Rename to ... * amd64-nbsd-nat.c: ... this. * amd64nbsd-tdep.c: Rename to ... * amd64-nbsd-tdep.c: ... this. * amd64obsd-nat.c: Rename to ... * amd64-obsd-nat.c: ... this. * amd64obsd-tdep.c: Rename to ... * amd64-obsd-tdep.c: ... this. * amd64-tdep.h: Update comments. * armbsd-tdep.c: Rename to ... * arm-bsd-tdep.c: ... this. * armnbsd-nat.c: Rename to ... * arm-nbsd-nat.c: ... this. * armnbsd-tdep.c: Rename to ... * arm-nbsd-tdep.c: ... this. * armobsd-tdep.c: Rename to ... * arm-obsd-tdep.c: ... this. * arm-tdep.h: Update comments. * hppabsd-tdep.c: Rename to ... * hppa-bsd-tdep.c: ... this, adjust include. * hppabsd-tdep.h: Rename to ... * hppa-bsd-tdep.h: ... this, adjust include barrier and comment. * hppanbsd-nat.c: Rename to ... * hppa-nbsd-nat.c: ... this. * hppanbsd-tdep.c: Rename to ... * hppa-nbsd-tdep.c: ... this, adjust include. * hppaobsd-nat.c: Rename to ... * hppa-obsd-nat.c: ... this. * hppaobsd-tdep.c: Rename to ... * hppa-obsd-tdep.c: ... this, adjust include. * i386bsd-nat.c: Rename to ... * i386-bsd-nat.c: ... this, adjust include. * i386bsd-nat.h: Rename to ... * i386-bsd-nat.h: ... this, adjust include barrier and comment. * i386bsd-tdep.c: Rename to ... * i386-bsd-tdep.c: ... this. * i386fbsd-nat.c: Rename to ... * i386-fbsd-nat.c: ... this, adjust include. * i386fbsd-tdep.c: Rename to ... * i386-fbsd-tdep.c: ... this, adjust include. * i386fbsd-tdep.h: Rename to ... * i386-fbsd-tdep.h: ... this, adjust include barrier and comment. * i386gnu-nat.c: Rename to ... * i386-gnu-nat.c: ... this. * i386gnu-tdep.c: Rename to ... * i386-gnu-tdep.c: ... this. * i386nbsd-nat.c: Rename to ... * i386-nbsd-nat.c: ... this, adjust include. * i386nbsd-tdep.c: Rename to ... * i386-nbsd-tdep.c: ... this. * i386obsd-nat.c: Rename to ... * i386-obsd-nat.c: ... this, adjust include. * i386obsd-tdep.c: Rename to ... * i386-obsd-tdep.c: ... this. * i386v4-nat.c: Rename to ... * i386-v4-nat.c: ... this. * i386-tdep.h: Update comments. * m68k-tdep.h: Update comments. * m68kbsd-nat.c: Rename to ... * m68k-bsd-nat.c: ... this. * m68kbsd-tdep.c: Rename to ... * m68k-bsd-tdep.c: ... this. * m68klinux-nat.c: Rename to ... * m68k-linux-nat.c: ... this. * m68klinux-tdep.c: Rename to ... * m68k-linux-tdep.c: ... this. * m88kbsd-nat.c: Rename to ... * m88k-bsd-nat.c: ... this. * mipsnbsd-nat.c: Rename to ... * mips-nbsd-nat.c: ... this, adjust include. * mipsnbsd-tdep.c: Rename to ... * mips-nbsd-tdep.c: ... this, adjust include. * mipsnbsd-tdep.h: Rename to ... * mips-nbsd-tdep.h: ... this, adjust include barrier and comment. * mips64obsd-nat.c: Rename to ... * mips64-obsd-nat.c: ... this. * mips64obsd-tdep.c: Rename to ... * mips64-obsd-tdep.c: ... this. * ppcfbsd-nat.c: Rename to ... * ppc-fbsd-nat.c: ... this, adjust include. * ppcfbsd-tdep.c: Rename to ... * ppc-fbsd-tdep.c: ... this, adjust include. * ppcfbsd-tdep.h: Rename to ... * ppc-fbsd-tdep.h: ... this, adjust include barrier and comment. * ppcnbsd-nat.c: Rename to ... * ppc-nbsd-nat.c: ... this, adjust include. * ppcnbsd-tdep.c: Rename to ... * ppc-nbsd-tdep.c: ... this, adjust include. * ppcnbsd-tdep.h: Rename to ... * ppc-nbsd-tdep.h: ... this, adjust include barrier and comment. * ppcobsd-nat.c: Rename to ... * ppc-obsd-nat.c: ... this, adjust include. * ppcobsd-tdep.c: Rename to ... * ppc-obsd-tdep.c: ... this, adjust include. * ppcobsd-tdep.h: Rename to ... * ppc-obsd-tdep.h: ... this, adjust include barrier and comment. * shnbsd-nat.c: Rename to ... * sh-nbsd-nat.c: ... this. * shnbsd-tdep.c: Rename to ... * sh-nbsd-tdep.c: ... this. * sparcnbsd-nat.c: Rename to ... * sparc-nbsd-nat.c: ... this. * sparcnbsd-tdep.c: Rename to ... * sparc-nbsd-tdep.c: ... this. * sparcobsd-tdep.c: Rename to ... * sparc-obsd-tdep.c: ... this. * sparc64fbsd-nat.c: Rename to ... * sparc64-fbsd-nat.c: ... this. * sparc64fbsd-tdep.c: Rename to ... * sparc64-fbsd-tdep.c: ... this. * sparc64nbsd-nat.c: Rename to ... * sparc64-nbsd-nat.c: ... this. * sparc64nbsd-tdep.c: Rename to ... * sparc64-nbsd-tdep.c: ... this. * sparc64obsd-nat.c: Rename to ... * sparc64-obsd-nat.c: ... this. * sparc64obsd-tdep.c: Rename to ... * sparc64-obsd-tdep.c: ... this. * sparc64-tdep.h: Update comments. * vaxbsd-nat.c: Rename to ... * vax-bsd-nat.c: ... this. * vaxnbsd-tdep.c: Rename to ... * vax-nbsd-tdep.c: ... this. * vaxobsd-tdep.c: Rename to ... * vax-obsd-tdep.c: ... this. * x86bsd-nat.h: Rename to ... * x86-bsd-nat.h: ... this, adjust include barrier and comment. * x86bsd-nat.c: Rename to ... * x86-bsd-nat.c: ... this, adjust include. * configure.tgt: Update renamed files. * config/alpha/fbsd.mh: Update renamed files. * config/alpha/nbsd.mh: Update renamed files. * config/arm/nbsdelf.mh: Update renamed files. * config/djgpp/fnchange.lst: Update renamed files. * config/i386/fbsd.mh: Update renamed files. * config/i386/fbsd64.mh: Update renamed files. * config/i386/i386gnu.mh: Update renamed files. * config/i386/i386sol2.mh: Update renamed files. * config/i386/nbsd64.mh: Update renamed files. * config/i386/nbsdelf.mh: Update renamed files. * config/i386/obsd.mh: Update renamed files. * config/i386/obsd64.mh: Update renamed files. * config/i386/sol2-64.mh: Update renamed files. * config/m68k/linux.mh: Update renamed files. * config/m68k/nbsdelf.mh: Update renamed files. * config/m68k/obsd.mh: Update renamed files. * config/m88k/obsd.mh: Update renamed files. * config/mips/nbsd.mh: Update renamed files. * config/mips/obsd64.mh: Update renamed files. * config/pa/nbsd.mh: Update renamed files. * config/pa/obsd.mh: Update renamed files. * config/powerpc/fbsd.mh: Update renamed files. * config/powerpc/nbsd.mh: Update renamed files. * config/powerpc/obsd.mh: Update renamed files. * config/sh/nbsd.mh: Update renamed files. * config/sparc/fbsd.mh: Update renamed files. * config/sparc/nbsd64.mh: Update renamed files. * config/sparc/nbsdelf.mh: Update renamed files. * config/sparc/obsd64.mh: Update renamed files. * config/vax/nbsdelf.mh: Update renamed files. * config/vax/obsd.mh: Update renamed files.
2016-11-22Change gdbarch software_single_step frame_info to regcacheYao Qi1-1/+1
This patch changes gdbarch method software_single_step's parameter from "struct frame_info *" to "struct regcache *, IOW, software_single_step starts to use current regcache rather than current frame for software single. gdb: 2016-11-22 Yao Qi <yao.qi@linaro.org> * gdbarch.sh (software_single_step): Change parameter from frame_info to regcache. * gdbarch.c, gdbarch.h: Regenerated. * aarch64-tdep.c (aarch64_software_single_step): Change parameter from frame_info to regcache. Don't call get_current_regcache. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise. (alpha_software_single_step): Likewise. * alpha-tdep.h (alpha_software_single_step): Update declaration. * arm-linux-tdep.c (arm_linux_software_single_step): Likewise. * arm-tdep.c (arm_software_single_step): Likewise. * arm-tdep.h (arm_software_single_step): Likewise. * breakpoint.c (insert_single_step_breakpoint): Pass regcache to gdbarch_software_single_step. * cris-tdep.c (cris_software_single_step): Change parameter from frame_info to regcache. Don't call get_current_regcache. * mips-tdep.c (mips_software_single_step): Likewise. * mips-tdep.h (mips_software_single_step): Update declaration. * moxie-tdep.c (moxie_software_single_step): Likewise. * nios2-tdep.c (nios2_software_single_step): Likewise. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration. * rs6000-aix-tdep.c (rs6000_software_single_step): Likewise. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise. * s390-linux-tdep.c (s390_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * spu-tdep.c (spu_software_single_step): Likewise. * tic6x-tdep.c (tic6x_software_single_step): Likewise.
2016-11-08gdbarch software_single_step returns VEC (CORE_ADDR) *Yao Qi1-1/+1
This patch changes gdbarch method software_single_step to return a vector of addresses on which GDB should insert breakpoints, and don't insert breakpoints. Instead, the caller of gdbarch_software_single_step inserts breakpoints if the returned vector is not NULL. gdb: 2016-11-08 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_software_single_step): Return VEC (CORE_ADDR) *. Return NULL instead of 0. Don't call insert_single_step_breakpoint. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise. (alpha_software_single_step): Likewise. * alpha-tdep.h (alpha_software_single_step): Update declaration. * arm-linux-tdep.c (arm_linux_software_single_step): Return VEC (CORE_ADDR) *. Return NULL instead of 0. * arm-tdep.c (arm_software_single_step): Return NULL instead of 0. * arm-tdep.h (arm_software_single_step): Update declaration. * breakpoint.c (insert_single_step_breakpoints): New function. * breakpoint.h (insert_single_step_breakpoints): Declare. * cris-tdep.c (cris_software_single_step): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. * gdbarch.sh (software_single_step): Change it to return VEC (CORE_ADDR) *. * gdbarch.c, gdbarch.h: Regenerated. * infrun.c (maybe_software_singlestep): Adjust. * mips-tdep.c (mips_deal_with_atomic_sequence): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. (micromips_deal_with_atomic_sequence): Likewise. (deal_with_atomic_sequence): Likewise. (mips_software_single_step): Likewise. * mips-tdep.h (mips_software_single_step): Update declaration. * moxie-tdep.c (moxie_software_single_step): Likewise. * nios2-tdep.c (nios2_software_single_step): Likewise. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration. * record-full.c (record_full_resume): Adjust. (record_full_wait_1): Likewise. * rs6000-aix-tdep.c (rs6000_software_single_step): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Return VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint. * s390-linux-tdep.c (s390_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * spu-tdep.c (spu_software_single_step): Likewise. * tic6x-tdep.c (tic6x_software_single_step): Likewise.
2016-11-08Remove arm_insert_single_step_breakpointYao Qi1-2/+0
This patch is to remove arm_insert_single_step_breakpoint. gdb: 2016-11-08 Yao Qi <yao.qi@linaro.org> * arm-linux-tdep.c (arm_linux_software_single_step): Don't call arm_insert_single_step_breakpoint, call insert_single_step_breakpoint instead. * arm-tdep.c (arm_insert_single_step_breakpoint): Remove. (arm_software_single_step): Don't call arm_insert_single_step_breakpoint, call insert_single_step_breakpoint instead. * arm-tdep.h (arm_insert_single_step_breakpoint): Remove declaration.
2016-02-11arm-tdep.c: Remove unused arm_displaced_step_copy_insnSimon Marchi1-3/+0
This function is never used, since it is superseded by arm_linux_displaced_step_copy_insn. gdb/ChangeLog: * arm-tdep.c (arm_displaced_step_copy_insn): Remove. (ARM displaced stepping support): Remove reference to arm_displaced_step_copy_insn in comment. * arm-tdep.h (arm_displaced_step_copy_insn): Remove. * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove reference to arm_displaced_step_copy_insn in comment.
2016-01-14[ARM] Remove field syscall_next_pc in struct gdbarch_tdepYao Qi1-7/+0
Field syscall_next_pc in struct gdbarch_tdep was to calculate the next pc of syscall instruction. On linux target, syscall_next_pc is set to arm_linux_syscall_next_pc, to do linux specific things. However, after we have struct arm_get_next_pcs_ops, we can do the same thing in struct arm_get_next_pcs_ops field syscall_next_pc, so syscall_next_pc in struct gdbarch_tdep is not needed any more. gdb: 2016-01-14 Yao Qi <yao.qi@linaro.org> * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc): Declare. (arm_linux_get_next_pcs_ops): Install arm_linux_get_next_pcs_syscall_next_pc. (arm_linux_syscall_next_pc): Change to ... (arm_linux_get_next_pcs_syscall_next_pc): ... it. (arm_linux_init_abi): Don't set tdep->syscall_next_pc. * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare. (arm_get_next_pcs_syscall_next_pc): Make it static. Don't call tdep->syscall_next_pc. * arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove. (arm_get_next_pcs_syscall_next_pc): Remove.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-12-18Support software single step on ARM in GDBServerAntoine Tremblay1-2/+16
This patch teaches GDBServer how to software single step on ARM linux by sharing code with GDB. The arm_get_next_pcs function in GDB is now shared with GDBServer. So that GDBServer can use the function to return the possible addresses of the next PC. A proper shared context was also needed so that we could share the code, this context is described in the arm_get_next_pcs structure. Testing : No regressions, tested on ubuntu 14.04 ARMv7 and x86. With gdbserver-{native,extended} / { -marm -mthumb } gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o, arm-linux.o. (ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c (arm-linux.o): New rule. (arm-get-next-pcs.o): New rule. * arch/arm-get-next-pcs.c: New file. * arch/arm-get-next-pcs.h: New file. * arch/arm-linux.h: New file. * arch/arm-linux.c: New file. * arm.c: Include common-regcache.c. (thumb_advance_itstate): Moved from arm-tdep.c. (arm_instruction_changes_pc): Likewise. (thumb_instruction_changes_pc): Likewise. (thumb2_instruction_changes_pc): Likewise. (shifted_reg_val): Likewise. * arm.h (submask): Move macro from arm-tdep.h (bit): Likewise. (bits): Likewise. (sbits): Likewise. (BranchDest): Likewise. (thumb_advance_itstate): Moved declaration from arm-tdep.h (arm_instruction_changes_pc): Likewise. (thumb_instruction_changes_pc): Likewise. (thumb2_instruction_changes_pc): Likewise. (shifted_reg_val): Likewise. * arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h arch/arm-linux.h. (arm_linux_get_next_pcs_ops): New struct. (ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT, ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT, ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack layout defines to arch/arm-linux.h. (arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c. (arm_linux_software_single_step): Adjust for arm_get_next_pcs implementation. * arm-tdep.c: Include arch/arm-get-next-pcs.h. (arm_get_next_pcs_ops): New struct. (submask): Move macro to arm.h. (bit): Likewise. (bits): Likewise. (sbits): Likewise. (BranchDest): Likewise. (thumb_instruction_changes_pc): Move to arm.c (thumb2_instruction_changes_pc): Likewise. (arm_instruction_changes_pc): Likewise. (shifted_reg_val): Likewise. (thumb_advance_itstate): Likewise. (thumb_get_next_pc_raw): Move to arm-get-next-pcs.c. (arm_get_next_pc_raw): Likewise. (arm_get_next_pc): Likewise. (thumb_deal_with_atomic_sequence_raw): Likewise. (arm_deal_with_atomic_sequence_raw): Likewise. (arm_deal_with_atomic_sequence): Likewise. (arm_get_next_pcs_read_memory_unsigned_integer): New function. (arm_get_next_pcs_addr_bits_remove): Likewise. (arm_get_next_pcs_syscall_next_pc): Likewise. (arm_get_next_pcs_is_thumb): Likewise. (arm_software_single_step): Adjust for arm_get_next_pcs implementation. * arm-tdep.h: (arm_get_next_pc): Remove declaration. (arm_get_next_pcs_read_memory_unsigned_integer): New declaration. (arm_get_next_pcs_addr_bits_remove): Likewise. (arm_get_next_pcs_syscall_next_pc): Likewise. (arm_get_next_pcs_is_thumb): Likewise. (arm_deal_with_atomic_sequence: Remove declaration. * common/gdb_vecs.h: Add CORE_ADDR vector definition. * configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o, arm-linux.o. (arm*-wince-pe): Add arm-get-next-pcs.o. (arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o, arm-get-next-pcs.o (arm*-*-netbsd*,arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o. (arm*-*-openbsd*): Likewise. (arm*-*-symbianelf*): Likewise. (arm*-*-*): Likewise. * symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h. gdb/gdbserver/ChangeLog: * Makefile.in (SFILES): Append arch/arm-linux.c, arch/arm-get-next-pcs.c. (arm-linux.o): New rule. (arm-get-next-pcs.o): New rule. * configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o. * linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved to linux-aarch32-low.c. (arm_eabi_breakpoint, arm_breakpoint): Likewise. (arm_breakpoint_len, thumb_breakpoint): Likewise. (thumb_breakpoint_len, thumb2_breakpoint): Likewise. (thumb2_breakpoint_len): Likewise. (arm_is_thumb_mode): Make non-static. * linux-aarch32-low.h (arm_abi_breakpoint): New macro. Moved from linux-aarch32-low.c. (arm_eabi_breakpoint, arm_breakpoint): Likewise. (arm_breakpoint_len, thumb_breakpoint): Likewise. (thumb_breakpoint_len, thumb2_breakpoint): Likewise. (thumb2_breakpoint_len): Likewise. (arm_is_thumb_mode): New declaration. * linux-arm-low.c: Include arch/arm-linux.h aarch/arm-get-next-pcs.h, sys/syscall.h. (get_next_pcs_ops): New struct. (get_next_pcs_addr_bits_remove): New function. (get_next_pcs_is_thumb): New function. (get_next_pcs_read_memory_unsigned_integer): Likewise. (arm_sigreturn_next_pc): Likewise. (get_next_pcs_syscall_next_pc): Likewise. (arm_gdbserver_get_next_pcs): Likewise. (struct linux_target_ops) <arm_gdbserver_get_next_pcs>: Initialize. * linux-low.h: Move CORE_ADDR vector definition to gdb_vecs.h. * server.h: Include gdb_vecs.h.
2015-12-18Refactor arm_software_single_step to use regcacheAntoine Tremblay1-4/+5
This patch is in preparation for software single step support on ARM in GDBServer. It refactors arm_*_software_single_step and sub-functions to use regcache instead of frame to access registers so that the code can be shared more easily between GDB and GDBServer. Note also that since the intention is at some point to get rid of frame completely in that function, memory reads have also been replaced by read_memory_unsigned_integer rather than get_frame_memory_unsigned. No regressions, tested on ubuntu 14.04 ARMv7 and x86. With gdbserver-{native,extended} / { -marm -mthumb } gdb/ChangeLog: * arm-linux-tdep.c (arm_linux_sigreturn_next_pc_offset): New function. (arm_linux_sigreturn_next_pc): Likewise. (arm_linux_syscall_next_pc): Use regcache instead of frame. (arm_linux_software_single_step): Likewise. * arm-tdep.c (arm_is_thumb): New function. (shifted_reg_va): Use regcache instead of frame. (thumb_get_next_pc_raw): Likewise. (arm_get_next_pc_raw): Likewise. (arm_get_next_pc): Likewise. (thumb_deal_with_atomic_sequence_raw): Likewise. (arm_deal_with_atomic_sequence_raw): Likewise. (arm_deal_with_atomic_sequence): Likewise. (arm_software_single_step): Likewise. * arm-tdep.h (struct gdbarch_tdep): Use regcache for syscall_next_pc. (arm_get_next_pc): Use regcache. (arm_deal_with_atomic_sequence): Likewise. (arm_is_thumb): New declaration. * regcache.c (regcache_raw_get_unsigned): New function. * regcache.h (regcache_raw_get_unsigned): New function declaration.
2015-12-18Share some ARM target dependent code from GDB with GDBServerAntoine Tremblay1-29/+0
This patch is in preparation for software single stepping support on ARM it shares some functions and definitions that will be needed. No regressions, tested on ubuntu 14.04 ARMv7 and x86. With gdbserver-{native,extended} / { -marm -mthumb } Not tested: wince/bsd build. gdb/ChangeLog: * arch/arm.c (bitcount): Move from arm-tdep.c. (condition_true): Likewise. * arch/arm.h (Instruction Definitions): Move form arm-tdep.h. (condition_true): Move defenition from arm-tdep.h. (bitcount): Likewise. * arm-tdep.c (condition_true): Move to arch/arm.c. (bitcount): Likewise. * arm-tdep.h (Instruction Definitions): Move to arch/arm.h. * arm-wince-tdep.c: Include arch/arm.h. * armnbsd-tdep.c: Likewise.
2015-07-30Move ARM register numbers enum to arch/arm.hYao Qi1-38/+1
This patch moves ARM register numbers enum to arch/arm.h, so that it can used by GDBserver too. This patch also creates a new directory gdb/arch in which arch-specific or target-specific files are placed. gdb: 2015-07-30 Yao Qi <yao.qi@linaro.org> * arm-tdep.h (enum gdb_regnum): Move it to ... * arch/arm.h: ... here. New file. * Makefile.in (HFILES_NO_SRCDIR): Add arch/arm.h.
2015-05-28Remove global variable arm_linux_has_wmmx_registers in arm-linux-nat.cYao Qi1-0/+1
This patch is to remove the global variable arm_linux_has_wmmx_registers in arm-linux-nat.c, and add a new field have_wmmx_registers in 'struct gdbarch_tdep'. gdb: 2015-05-28 Yao Qi <yao.qi@linaro.org> * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove. (arm_linux_fetch_inferior_registers): Use tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers. (arm_linux_store_inferior_registers): Likewise. (arm_linux_read_description): Don't set arm_linux_has_wmmx_registers. * arm-tdep.c (arm_gdbarch_init): Set tdep->have_wmmx_registers according target descriptions. * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New field.
2015-05-28Remove global variable arm_linux_vfp_register_count in arm-linux-nat.cYao Qi1-1/+3
This patch is to remove the global variable arm_linux_vfp_register_count from arm-linux-nat.c. This global variable is set when native gdb looks for the right target description according HWCAP. However, 'struct gdbarch_tdep' has already had a field have_vfp_registers, which is a boolean about whether target has vfp registers or not. This patch converts this boolean field to a numeric counter to replace global variable arm_linux_vfp_register_count. gdb: 2015-05-28 Yao Qi <yao.qi@linaro.org> * arm-linux-nat.c (arm_linux_vfp_register_count): Remove. (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep instead of arm_linux_vfp_register_count. (store_vfp_regs): Likewise. (arm_linux_fetch_inferior_registers): Likewise. (arm_linux_store_inferior_registers): Likewise. (arm_linux_read_description): Don't set arm_linux_vfp_register_count. * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections): Adjust. * arm-tdep.c (arm_gdbarch_init): Add assert on vfp_register_count. * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename field to vfp_register_count. All users updated.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-09-30ARM: Migrate from 'regset_from_core_section' to 'iterate_over_regset_sections'Andreas Arnez1-3/+5
For ARM BSD targets, don't define the gdbarch method 'regset_from_core_section', but the iterator method instead. gdb/ChangeLog: * arm-tdep.h (armbsd_regset_from_core_section): Remove prototype. (armbsd_iterate_over_regset_sections): New prototype. * armbsd-tdep.c (armbsd_regset_from_core_section): Remove. (armbsd_iterate_over_regset_sections): New. * armobsd-tdep.c (armobsd_init_abi): Adjust gdbarch initialization.
2014-05-21ARM: Replace regset_alloc() invocations by static regset structures.Andreas Arnez1-3/+0
After removal of the regset_alloc invocations, the appropriate tdep fields become obsolete and are thus removed.
2014-01-15gdb: ARM: Adds support for recording system call instructionsOmair Javaid1-2/+2
gdb/ChangeLog: 2014-01-15 Omair Javaid <omair.javaid@linaro.org> * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h". (struct arm_linux_record_tdep): Declare. (arm_canonicalize_syscall): New function. (arm_all_but_pc_registers_record): New function. (arm_linux_syscall_record): New function. (arm_linux_init_abi): Add syscall recording constructs. * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall decoding. (arm_record_coproc_data_proc): Update arm syscall decoding. * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove. <arm_syscall_record>: New field. * configure.tgt (arm*-*-linux*): Add linux-record.o to gdb_target_obs.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-04-19-Wpointer-sign: char -> gdb_byte.Pedro Alves1-3/+3
-Wpointer-sign catches all these cases across the codebase that should be using gdb_byte for raw target bytes. I think these are all obvious, hence I've collapsed into a single patch. gdb/ 2013-04-19 Pedro Alves <palves@redhat.com> * aarch64-tdep.c (aarch64_default_breakpoint): Change type to gdb_byte[]. (aarch64_breakpoint_from_pc): Change return type to gdb_byte *. * ada-lang.c (ada_value_assign): Use gdb_byte. * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[]. (alphanbsd_sigtramp_offset): Use gdb_byte. * arm-linux-tdep.c (arm_linux_arm_le_breakpoint) (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint) (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint) (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint) (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[]. * arm-tdep.c (arm_stub_unwind_sniffer) (arm_displaced_init_closure): Use gdb_byte. (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint) (arm_default_thumb_le_breakpoint) (arm_default_thumb_be_breakpoint): Change type to gdb_byte[]. * arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint, thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *. * arm-wince-tdep.c (arm_wince_le_breakpoint) (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[]. * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint) (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint) (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[]. * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint) (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[]. * cris-tdep.c (push_stack_item, cris_push_dummy_call) (cris_store_return_value, cris_extract_return_value): Use gdb_byte. (constraint): Change type of parameter to char * from signed char*. Use gdb_byte. * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type of local buffer to gdb_byte *. * dwarf2read.c (read_index_from_section): Use gdb_byte. (create_dwp_hash_table): Change type of locals to gdb_byte *. (add_address_entry): Change type of local buffer to gdb_byte[]. * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr) (frv_push_dummy_call): Use gdb_byte. * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code) (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide) (hppa_hpux_supply_save_state): Use gdb_byte. * hppa-tdep.c (hppa32_push_dummy_call) (hppa64_convert_code_addr_to_fptr): Use gdb_byte. * ia64-tdep.c (extract_bit_field, replace_bit_field) (slotN_contents, replace_slotN_contents): Change type of parameter to gdb_byte *. (fetch_instruction, ia64_pseudo_register_write) (ia64_register_to_value, ia64_value_to_register) (ia64_extract_return_value, ia64_store_return_value) (ia64_push_dummy_call): Use gdb_byte. * m32c-tdep.c (m32c_return_value): Remove cast. * m68hc11-tdep.c (m68hc11_pseudo_register_write) (m68hc11_push_dummy_call, m68hc11_store_return_value): Use gdb_byte. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte. * mn10300-tdep.c (mn10300_store_return_value) (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use gdb_byte. * moxie-tdep.c (moxie_process_readu): Use gdb_byte. (moxie_process_record): Remove casts. * ppc-ravenscar-thread.c (supply_register_at_address) (ppc_ravenscar_generic_store_registers): Use gdb_byte. * ravenscar-thread.c (get_running_thread_id): Use gdb_byte. * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte. * remote-mips.c (mips_xfer_memory): Use gdb_byte. * remote.c (compare_sections_command): Use gdb_byte. * score-tdep.c (score7_free_memblock): Change type of parameter to gdb_byte *. * sh-tdep.c (sh_justify_value_in_reg): Change return type to gdb_byte *. Use gdb_byte. (sh_push_dummy_call_fpu): Use gdb_byte. (sh_extract_return_value_nofpu, sh_extract_return_value_fpu) (sh_store_return_value_nofpu, sh_store_return_value_fpu) (sh_register_convert_to_virtual, sh_register_convert_to_raw): Change parameter type to 'gdb_byte *'. Use gdb_byte. (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte. * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte. (sh64_store_return_value, sh64_register_convert_to_virtual): Change parameter type to 'gdb_byte *'. Use gdb_byte. (sh64_pseudo_register_write): Use gdb_byte. * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'. * solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte buffer. (irix_current_sos): Use gdb_byte. * solib-som.c (som_current_sos): Use gdb_byte. * sparc-ravenscar-thread.c (supply_register_at_address) (sparc_ravenscar_generic_store_registers): Use gdb_byte. * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'. * spu-tdep.c (spu_get_overlay_table): Use gdb_byte. * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to 'gdb_byte *'. * tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to 'gdb_byte *'. * tracepoint.c (tfile_fetch_registers): Use gdb_byte. * xstormy16-tdep.c (xstormy16_extract_return_value) (xstormy16_store_return_value): Change parameter type to 'gdb_byte *'. Adjust. (xstormy16_push_dummy_call): Use gdb_byte. * xtensa-tdep.c (xtensa_scan_prologue, call0_ret) (call0_analyze_prologue, execute_code): Use gdb_byte.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-04-26 * arm-tdep.h (VFP_REGISTER_SIZE): Define.Jonathan Larmour1-0/+4
* features/arm-with-m-vfp-d16.xml: New file. Describes Cortex-M with VFPv4-sp-d16 FPU register layout. * features/Makefile (WHICH): Add arm-with-m-vfp-d16. * features/arm-with-m-vfp-d16.c: New. Generated from above. * arm-tdep.c: Include arm-with-m-vfp-d16.c. (arm-register_g_packet_guesses): Add vfp-d16 guess. (_initialise_arm_tdep): Initialize arm-with-m-vfp-d16 tdesc.
2012-03-27 * arm-linux-tdep.c (arm_linux_init_abi): CallPawandeep Oza1-0/+5
set_gdbarch_process_record. Initialize `arm_swi_record' field. * arm-tdep.c (arm_process_record): New function. (deallocate_reg_mem): New function. (decode_insn): New function. (thumb_record_branch): New function. (thumb_record_ldm_stm_swi(): New function. (thumb_record_misc): New function. (thumb_record_ld_st_stack): New function. (thumb_record_ld_st_imm_offset): New function. (thumb_record_ld_st_reg_offset(): New function. (thumb_record_add_sub_cmp_mov): New function. (thumb_record_shift_add_sub): New function. (arm_record_coproc_data_proc): New function. (arm_record_coproc): New function. (arm_record_b_bl): New function. (arm_record_ld_st_multiple): New function. (arm_record_ld_st_reg_offset): New function. (arm_record_ld_st_imm_offset): New function. (arm_record_data_proc_imm): New function. (arm_record_data_proc_misc_ld_str): New function. (arm_record_extension_space): New function. (arm_record_strx): New function. (sbo_sbz): New function. (struct insn_decode_record): New structure for arm insn record. (REG_ALLOC): New macro for reg allocations. (MEM_ALLOC): New macro for memory allocations. * arm-tdep.h (struct gdbarch_tdep): New field 'arm_swi_record'
2012-01-04Copyright year update in most files of the GDB Project.Joel Brobecker1-2/+1
gdb/ChangeLog: Copyright year update in most files of the GDB Project.
2011-12-07 * arm-tdep.h (arm_deal_with_atomic_sequence): Add prototype.Ulrich Weigand1-0/+1
* arm-tdep.c (thumb_deal_with_atomic_sequence_raw): New function. (arm_deal_with_atomic_sequence_raw): Likewise. (arm_deal_with_atomic_sequence): Likewise. (arm_software_single_step): Call it. * arm-linux-tdep.c (arm_linux_software_single_step): Likewise.
2011-06-15 * arm-linux-tdep.c: Include "auxv.h".Ulrich Weigand1-1/+8
(AT_HWCAP): Define. (ARM_LINUX_SIZEOF_VFP): Define. (arm_linux_supply_vfp): New function. (arm_linux_collect_vfp): Likewise. (arm_linux_regset_from_core_section): Handle .reg-arm-vfp sections. (arm_linux_fpa_regset_sections): New variable. (arm_linux_vfp_regset_sections): Likewise. (arm_linux_core_read_description): New function. (arm_linux_init_abi): Install arm_linux_core_read_description and arm_linux_fpa_regset_sections or arm_linux_vfp_regset_sections as appropriate for the architecture. * arm-tdep.h (struct gdbarch_tdep): Add member "vfpregset". (tdesc_arm_with_m): Declare. (tdesc_arm_with_iwmmxt): Likewise. (tdesc_arm_with_vfpv2): Likewise. (tdesc_arm_with_vfpv3): Likewise. (tdesc_arm_with_neon): Likewise. * arm-linux-nat.c: Move features/*.c includes ... * arm-tdep.c: ... here. * arm-linux-nat.c (arm_linux_read_description): Move initializing target description data structures ... * arm-tdep.c (_initialize_arm_tdep): ... here. * arm-linux-nat.c (HWCAP_VFP, HWCAP_IWMMXT, HWCAP_NEON, HWCAP_VFPv3, HWCAP_VFPv3D16): Move definitions ... * arm-linux-tdep.h: ... here.
2011-04-072011-04-07 Yao Qi <yao@codesourcery.com>Yao Qi1-2/+1
* arm-linux-tdep.c (arm_linux_copy_svc): Remove parameters INSN and TO. * arm-tdep.c (cleanup_svc): Handle variable instruction size. (arm_copy_svc): Remove parameters INSN and TO. (decode_svc_copro): Update caller. * arm-tdep.h (struct displaced_step_closure): Remove parameters from function pointer `copy_svc_os'.
2011-04-01 * arm-tdep.h (struct address_space): Add forward declaration.Pedro Alves1-0/+1
2011-04-01gdb/Ulrich Weigand1-0/+2
* arm-tdep.h (arm_insert_single_step_breakpoint): Add prototype. * arm-tdep.c (arm_override_mode): New global. (arm_pc_is_thumb): Respect arm_override_mode. Remove single-step execution mode heuristics. (thumb_get_next_pc_raw): Remove INSERT_BKTP argument; always insert second single-step breakpoint if needed, using arm_insert_single_step_breakpoint. (arm_get_next_pc_raw): Remove INSERT_BKTP argument. Only handle ARM execution mode, do not call thumb_get_next_pc_raw. (arm_get_next_pc): Encode execution mode in return value. Call either arm_get_next_pc_raw or thumb_get_next_pc_raw. (arm_insert_single_step_breakpoint): New function. (arm_software_single_step): Call it. * arm-linux-tdep.c (arm_linux_sigreturn_return_addr): Add IS_THUMB argument to return execution mode of sigreturn target. (arm_linux_syscall_next_pc): Use it. (arm_linux_copy_svc): Update call. (arm_linux_software_single_step): Call arm_insert_single_step_breakpoint. gdb/testsuite/ * gdb.arch/thumb-singlestep.S: New file. * gdb.arch/thumb-singlestep.exp: Likewise.
2011-03-082011-03-08 Yao Qi <yao@codesourcery.com>Yao Qi1-1/+2
* arm-tdep.c: Remove prototype declaration displaced_in_arm_mode. (displaced_read_reg): Add `dsc' parameter, remove `from' parameter. Use cached result instead of calling displaced_in_arm_mode again. (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter. (displaced_write_reg, copy_preload, copy_preload_reg): Callers update. (cleanup_copro_load_store, copy_copro_load_store): Likewise. (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise. (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise. (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise. (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise. (cleanup_block_load_all, cleanup_block_store_pc): Likewise. (cleanup_block_load_pc, copy_block_xfer): Likewise. * arm-linux-tdep.c (arm_linux_copy_svc): Callers update. (arm_catch_kernel_helper_return): Likewise. * gdb/arm-tdep.h : Update function declarations.
2011-03-022011-03-02 Yao Qi <yao@codesourcery.com>Yao Qi1-0/+11
* arm-tdep.h (struct displaced_step_closure): Add two new fields is_thumb and insn_size. * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset on both ARM and Thumb mode. (arm_process_displaced_insn): Set is_thumb and insn_size. (arm_displaced_init_closure): Handle both 16-bit and 32-bit. (arm_displaced_step_fixup): Likewise.
2011-03-01 * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define.Ulrich Weigand1-0/+3
(arm_linux_restart_syscall_init): Handle both on-stack and in-kernel versions of the trampoline. Handle Thumb vs. ARM addresses. (arm_kernel_linux_restart_syscall_tramp_frame): New global. (arm_linux_init_abi): Install it. * arm-tdep.c (arm_psr_thumb_bit): Make global. * arm-tdep.c (arm_psr_thumb_bit): Add prototype.
2011-02-21ChangeLog:Ulrich Weigand1-0/+4
* arm-linux-nat.c: Include "observer.h" and "gdbthread.h". (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define. (struct arm_linux_hwbp_cap): New type. (arm_linux_get_hwbp_cap): New function. (arm_linux_get_hw_breakpoint_count): Likewise. (arm_linux_get_hw_watchpoint_count): Likewise. (arm_linux_can_use_hw_breakpoint): Likewise. (arm_hwbp_type): New type. (arm_hwbp_control_t): Likewise. (struct arm_linux_hw_breakpoint): Likewise. (struct arm_linux_thread_points): Likewise. (arm_threads): New global variable. (arm_linux_find_breakpoints_by_tid): New function. (arm_hwbp_control_initialize): Likewise. (arm_hwbp_control_is_enabled): Likewise. (arm_hwbp_control_disable): Likewise. (arm_linux_hw_breakpoint_initialize): Likewise. (arm_linux_get_hwbp_type): Likewise. (arm_linux_hw_watchpoint_initialize): Likewise. (arm_linux_hw_breakpoint_equal): Likewise. (arm_linux_insert_hw_breakpoint1): Likewise. (arm_linux_remove_hw_breakpoint1): Likewise. (arm_linux_insert_hw_breakpoint): Likewise. (arm_linux_remove_hw_breakpoint): Likewise. (arm_linux_region_ok_for_hw_watchpoint): Likewise. (arm_linux_insert_watchpoint): Likewise. (arm_linux_remove_watchpoint): Likewise. (arm_linux_stopped_data_address): Likewise. (arm_linux_stopped_by_watchpoint): Likewise. (arm_linux_watchpoint_addr_within_range): Likewise. (arm_linux_new_thread): Likewise. (arm_linux_thread_exit): Likewise. (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint related target callbacks. Register arm_linux_new_thread and arm_linux_thread_exit. * arm-tdep.h (arm_pc_is_thumb): Add prototype. * arm-tdep.c (arm_pc_is_thumb): Make global. (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint. testsuite/ChangeLog: * lib/gdb.exp (skip_hw_breakpoint_tests): Add arm*-*-* target. (skip_hw_watchpoint_tests): Likewise. (skip_hw_watchpoint_multi_tests): Likewise.
2011-02-182011-02-18 Yao Qi <yao@codesourcery.com>Yao Qi1-3/+2
* gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ... (arm_process_displaced_insn): .. here. Remove parameter INSN. (thumb_process_displaced_insn): New. * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update call to arm_process_displaced_insn. * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn.
2011-01-072011-01-07 Michael Snyder <msnyder@vmware.com>Michael Snyder1-1/+1
* ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-01run copyright.sh for 2011.Joel Brobecker1-1/+1
2010-08-302010-08-30 Yao Qi <yao@codesourcery.com>Yao Qi1-0/+5
* arm-linux-tdep.c (arm_linux_sigreturn_return_addr): New. (arm_linux_syscall_next_pc): New. (arm_linux_copy_svc): Use arm_linux_sigreturn_return_addr instead. (arm_linux_init_abi): Initialize syscall_next_pc. * arm-tdep.c (thumb_get_next_pc_raw): Get next pc of SWI in Thumb mode. (arm_get_next_pc_raw): Get next pc of SWI in ARM mode. * arm-tdep.h (struct gdbarch_tdep): Add a function pointer syscall_next_pc. Declare arm_frame_is_thumb.
2010-08-24 * arm-tdep.c: Include features/arm-with-m.c.Daniel Jacobowitz1-0/+3
(arm_psr_thumb_bit): New. Update all uses of CPSR_T to call this function. (arm_pc_is_thumb): Add a gdbarch argument. Update all callers. Check is_m after force-mode. (arm_gdbarch_init): Check the binary before the target description. Add check for M profile attribute. If we have an M-profile device, but no target register description, use arm-with-m. Recognize the new org.gnu.gdb.arm.m-profile feature and its xpsr register. (_initialize_arm_tdep): Call initialize_tdesc_arm_with_m. * arm-tdep.h (XPSR_T): Define. (struct gdbarch_tdep): Add is_m member. * features/arm-m-profile.xml, features/arm-with-m.c, features/arm-with-m.xml: New files. doc/ * gdb.texinfo (ARM Features): Document org.gnu.gdb.arm.m-profile.
2010-04-122010-04-12 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>Richard Earnshaw1-0/+1
* arm-tdep.h (gdb_regnum): Add ARM_FPSCR_REGNUM * arm-linux-nat.c (arm_linux_vfp_register_count): New variable. (fetch_vfp_registers): New function to fetch VFP registers. (store_vfp_registers): New function to store VFP registers. (arm_linux_fetch_inferior_registers): Add support for VFP registers. (arm_linux_store_inferior_registers): Likewise. (arm_linux_read_description): Likewise. (_initialize_arm_linux_nat): Delay initialising iWMMX tdesc until we need it.
2010-02-01 * arm-linux-tdep.c (arm_linux_thumb2_be_breakpoint)Daniel Jacobowitz1-1/+8
(arm_linux_thumb2_le_breakpoint): New constants. (arm_linux_init_abi): Set thumb2_breakpoint and thumb2_breakpoint_size. * arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions. (thumb_get_next_pc): Add a comment. Rename IT to ITSTATE. Implement support for single stepping through IT blocks if a 32-bit Thumb breakpoint instruction is available. (arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction is available, use it when needed. (arm_remote_breakpoint_from_pc): New function. (arm_gdbarch_init): Register arm_remote_breakpoint_from_pc. * arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint comment. Add thumb2_breakpoint and thumb2_breakpoint_size. gdbserver/ * linux-arm-low.c (thumb_breakpoint_len): Delete. (thumb2_breakpoint): New. (arm_breakpoint_at): Check for Thumb-2 breakpoints. testsuite/ * gdb.arch/thumb2-it.S, gdb.arch/thumb2-it.exp: New files.
2010-01-01Update copyright year in most headers.Joel Brobecker1-1/+2
Automatic update by copyright.sh.
2009-07-30 * arm-linux-tdep.c (arch-utils.h, inferior.h, gdbthread.h, symfile.h):Julian Brown1-0/+102
Include files. (arm_linux_cleanup_svc, arm_linux_copy_svc): New. (cleanup_kernel_helper_return, arm_catch_kernel_helper_return): New. (arm_linux_displaced_step_copy_insn): New. (arm_linux_init_abi): Initialise displaced stepping callbacks. * arm-tdep.c (DISPLACED_STEPPING_ARCH_VERSION): New macro. (ARM_NOP): New. (displaced_read_reg, displaced_in_arm_mode, branch_write_pc) (bx_write_pc, load_write_pc, alu_write_pc, displaced_write_reg) (insn_references_pc, copy_unmodified, cleanup_preload, copy_preload) (copy_preload_reg, cleanup_copro_load_store, copy_copro_load_store) (cleanup_branch, copy_b_bl_blx, copy_bx_blx_reg, cleanup_alu_imm) (copy_alu_imm, cleanup_alu_reg, copy_alu_reg) (cleanup_alu_shifted_reg, copy_alu_shifted_reg, cleanup_load) (cleanup_store, copy_extra_ld_st, copy_ldr_str_ldrb_strb) (cleanup_block_load_all, cleanup_block_store_pc) (cleanup_block_load_pc, copy_block_xfer, cleanup_svc, copy_svc) (copy_undef, copy_unpred): New. (decode_misc_memhint_neon, decode_unconditional) (decode_miscellaneous, decode_dp_misc, decode_ld_st_word_ubyte) (decode_media, decode_b_bl_ldmstm, decode_ext_reg_ld_st) (decode_svc_copro, arm_process_displaced_insn) (arm_displaced_init_closure, arm_displaced_step_copy_insn) (arm_displaced_step_fixup): New. (arm_gdbarch_init): Initialise max insn length field. * arm-tdep.h (DISPLACED_TEMPS, DISPLACED_MODIFIED_INSNS): New macros. (displaced_step_closure, pc_write_style): New. (arm_displaced_init_closure, displaced_read_reg) (arm_process_displaced_insn, arm_displaced_init_closure) (displaced_read_reg, displaced_write_reg, arm_displaced_step_copy_insn) (arm_displaced_step_fixup): Add prototypes.
2009-07-28 * NEWS: Mention ARM VFP support.Daniel Jacobowitz1-0/+11
* target-descriptions.c (tdesc_register_type): Make public. (tdesc_unnumbered_register): New function. (tdesc_register_reggroup_p): Allow missing pseudo_register_reggroup_p. * target-descriptions.h (tdesc_register_type): Declare. (tdesc_unnumbered_register): Declare. * arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions. (arm_push_dummy_call): Use arm_neon_quad_write. (arm_neon_double_type, arm_neon_quad_type): New functions. (arm_register_type): Handle VFP and NEON registers. Override the types of double-precision registers for NEON. Disable FPA registers if they are not present. (arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers. (arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read. (arm_register_name): Handle VFP single and NEON quad registers. (arm_pseudo_read, arm_pseudo_write): New functions. (arm_gdbarch_init): Check for VFP and NEON in the target description. Assign numbers to double-precision registers. Register VFP and NEON pseudo registers. Remove a shadowed "i" variable. * arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and ARM_D31_REGNUM. (struct gdbarch_tdep): Add have_neon_pseudos, have_neon, have_vfp_registers, have_vfp_pseudos, neon_double_type, and neon_quad_type. * features/Makefile: Make expedite settings only architecture specific. (WHICH): Add new ARM descriptions. * features/arm-with-neon.xml, features/arm-with-vfpv2.c, features/arm-with-vfpv3.c, features/arm-vfpv2.xml, features/arm-vfpv3.xml, features/arm-with-vfpv2.xml, features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files. * regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat, regformats/arm-with-vfpv3.dat: Generate. doc/ * gdb.texinfo (ARM Features): Document org.gnu.gdb.arm.vfp and org.gnu.gdb.arm.neon. gdbserver/ * linux-low.c (linux_write_memory): Update debugging output. * Makefile.in (clean): Add new descriptions. (arm-with-vfpv2.o, arm-with-vfpv2.c, arm-with-vfpv3.o) (arm-with-vfpv3.c, arm-with-neon.o, arm-with-neon.c): New rules. * configure.srv: Add new files for arm*-*-linux*. * linux-arm-low.c: Add new declarations. (PTRACE_GETVFPREGS, PTRACE_SETVFPREGS): Define if undefined. (arm_hwcap, HWCAP_VFP, HWCAP_IWMMXT, HWCAP_NEON, HWCAP_VFPv3) (HWCAP_VFPv3D16): New. (arm_fill_wmmxregset, arm_store_wmmxregset): Check HWCAP_IWMMXT instead of __IWMMXT__. (arm_fill_vfpregset, arm_store_vfpregset, arm_get_hwcap) (arm_arch_setup): New. (target_regsets): Remove #ifdef. Add VFP regset. (the_low_target): Use arm_arch_setup. testsuite/ * gdb.base/float.exp: Handle VFP registers.
2009-07-02 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,Ulrich Weigand1-0/+3
builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext, builtin_type_ia64_spill, builtin_type_ia64_quad): Remove. (init_float_type, init_complex_type): Add prototypes. * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double, builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext, builtin_type_ia64_spill, builtin_type_ia64_quad): Remove. (_initialize_gdbtypes): Do not initialize them. (build_flt): Rename to ... (init_float_type): ... this. Make global. (build_complex): Rename to ... (init_complex_type): ... this. Make global. Remove BIT argument. (gdbtypes_post_init): Update calls. * ada-lang.c (ada_language_arch_info): Use init_float_type. * jv-lang.c (build_java_types): Likewise. * m2-lang.c (build_m2_types): Likewise. * f-lang.c (build_fortran_types): Use init_float_type and init_complex_type. * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead of using builtin_type_ieee_single, builtin_type_ieee_double, or builtin_type_arm_ext. * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member. * ia64-tdep.c (builtin_type_ia64_ext): Remove. (_initialize_ia64_tdep): Do not initialize it. (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext): Move up. (ia64_ext_type): New function. (ia64_register_reggroup_p, ia64_convert_register_p, ia64_register_to_value, ia64_value_to_register, ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type instead of builtin_type_ia64_ext. * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member. (i387_ext_type): Add prototype. * i386-tdep.c (i387_ext_type): New function. (i386_extract_return_value, i386_store_return_value, i386_register_type): Use it instead of builtin_type_i387_ext. * amd64-tdep.c (amd64_register_type): Likewise. * i387-tdep.c (print_i387_value, i387_register_to_value, i387_value_to_register): Likewise. (print_i387_value, print_i387_ext): Add GDBARCH argument. (print_i387_ext, i387_print_float_info): Pass to subroutines. * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member. * m68k-tdep.c (m68881_ext_type): New function. (m68k_register_type, m68k_convert_register_p): Use it instead of builtin_type_m68881_ext. * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member. * arm-tdep.c (arm_ext_type): New function. (arm_register_type): Use it instead of builtin_type_arm_ext. * alpha-tdep.c (alpha_register_type): Use builtin types instead of builtin_type_ieee_double. * mips-tdep.c (mips_float_register_type, mips_double_register_type): Remove. (mips_register_type): Use builtin types instead of builtin_type_ieee_single and builtin_type_ieee_double. (mips_print_fp_register): Use builtin types instead of mips_float_register_type and mips_double_register_type. * hppa-tdep.c (hppa32_register_type, hppa64_register_type): Use builtin types instead of builtin_type_ieee_single and builtin_type_ieee_double.
2009-04-22 * arm-linux-nat.c (fetch_register, store_register): UseKazu Hirata1-1/+0
ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM. * arm-linux-tdep.c (arm_linux_supply_gregset, arm_linux_collect_gregset): Likewise. * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New. * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
2009-01-03 Updated copyright notices for most files.Joel Brobecker1-1/+1
2008-05-03 * alpha-tdep.h (ALPHA_REGISTER_BYTES): Delete.Daniel Jacobowitz1-5/+0
* arm-tdep.h (STATUS_REGISTER_SIZE): Delete. * breakpoint.c (args_for_catchpoint_enable, current_exception_event): Delete. * c-typeprint.c (c_type_print_base): Delete handling of template instantiations. * cp-support.h (METHOD_PTR_IS_VIRTUAL, METHOD_PTR_FROM_VOFFSET) (METHOD_PTR_TO_VOFFSET): Delete. * defs.h (QUIT_FIXME): Delete. * f-lang.h (DEFAULT_DOTMAIN_NAME_IN_MF77, DEFAULT_MAIN_NAME_IN_MF77) (DEFAULT_DOTMAIN_NAME_IN_XLF_BUGGY, DEFAULT_DOTMAIN_NAME_IN_XLF): Delete. * gdbtypes.h (struct cplus_struct_type): Delete is_inlined, ninstantiations, and instantiations. (TYPE_INSTANTIATIONS, TYPE_NINSTANTIATIONS, TYPE_INSTANTIATION) (TYPE_FN_FIELD_INLINED): Delete. * srec.h (SREC_BINARY): Delete. * symtab.c (symbol_init_demangled_name): Delete. * symtab.h (SYMBOL_INIT_DEMANGLED_NAME, symbol_init_demangled_name) (SYMBOL_OBJFILE, struct exception_event_record, CURRENT_EXCEPTION_KIND) (CURRENT_EXCEPTION_CATCH_SAL, CURRENT_EXCEPTION_CATCH_LINE) (CURRENT_EXCEPTION_CATCH_FILE, CURRENT_EXCEPTION_CATCH_PC) (CURRENT_EXCEPTION_THROW_SAL, CURRENT_EXCEPTION_THROW_LINE) (CURRENT_EXCEPTION_THROW_FILE, CURRENT_EXCEPTION_THROW_PC): Delete. * target.h (enum thread_control_capabilities): Delete tc_switch. (target_can_switch_threads): Delete.
2008-05-01 * arm-linux-tdep.h (ARM_CPSR_REGNUM): Delete definition.Daniel Jacobowitz1-0/+3
* arm-tdep.c (arm_frame_is_thumb): New. (arm_pc_is_thumb): Clarify comment. (thumb_analyze_prologue): Remove PC special case. (thumb_scan_prologue): Take a block_addr argument. Use it for find_pc_partial_function. Remove unused variables. (arm_scan_prologue): Use arm_frame_is_thumb. Use the block address for find_pc_partial_function. Remove PC special case. (arm_prologue_prev_register): Add special handling for PC and CPSR. (arm_dwarf2_prev_register, arm_dwarf2_frame_init_reg): New. (arm_get_next_pc): Use arm_frame_is_thumb. (arm_write_pc): Use CPSR_T instead of 0x20. (arm_gdbarch_init): Call dwarf2_frame_set_init_reg. * arm-tdep.h (enum gdb_regnum): Add ARM_CPSR_REGNUM. (CPSR_T): Define. * dwarf2-frame.c (dwarf2_frame_prev_register): Handle DWARF2_FRAME_REG_FN. * dwarf2-frame.h (enum dwarf2_frame_reg_rule): Add DWARF2_FRAME_REG_FN. (struct dwarf2_frame_state_reg): Add FN to loc union. * gdb.arch/thumb-prologue.exp: Do not expect a saved PC.
2008-01-01 Updated copyright notices for most files.Daniel Jacobowitz1-1/+1
2007-11-152007-11-15 Markus Deuling <deuling@de.ibm.com>Markus Deuling1-5/+0
* arm-tdep.c (arm_prologue_this_id): Replace LOWEST_PC by its expression and use get_frame_arch to replace current_gdbarch by frame's architecture. *arm-tdep.h (LOWEST_PC): Remove
generated by cgit v1.1 at 2024-11-22 12:09:34 +0000