aboutsummaryrefslogtreecommitdiff
path: root/gdb/acinclude.m4
AgeCommit message (Collapse)AuthorFilesLines
2024-01-10gdb: move libiberty.m4 to gdbsupportMike Frysinger1-1/+1
This is used by gdb, gdbsupport, and gdbserver. We want to use it in the sim tree too. Move it to gdbsupport which is meant as the common sharing space for these projects. Approved-By: Tom Tromey <tom@tromey.com>
2023-11-15Finalized intl-update patchesArsen Arsenovi?1-1/+2
* intl: Remove directory. Replaced with out-of-tree GNU gettext. * .gitignore: Add '/gettext*'. * configure.ac (host_libs): Replace intl with gettext. (hbaseargs, bbaseargs, baseargs): Split baseargs into {h,b}baseargs. (skip_barg): New flag. Skips appending current flag to bbaseargs. <library exemptions>: Exempt --with-libintl-{type,prefix} from target and build machine argument passing. * configure: Regenerate. * Makefile.def (host_modules): Replace intl module with gettext module. (configure-ld): Depend on configure-gettext. * Makefile.in: Regenerate. * src-release.sh: Remove references to the intl/ directory.
2023-03-07gdb: Fix GDB_AC_CHECK_BFD macro regressionRichard Purdie1-1/+1
Commit 5218fa9e8937b007d554f1e01c2e4ecdb9b7e271, "gdb: use libtool in GDB_AC_CHECK_BFD" dropped passing in existing LDFLAGS. In our environment, this caused the configure check "checking for ELF support in BFD" to stop working causing build failures as we need our LDFLAGS to be used for correct linking. That change also meant the code failed to match the comments. Add back the missing LDFLAGS preservation, fix our builds and match the comment. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Change-Id: Ie91509116fab29f95b9db1ff0b6ddc280d460112 Approved-By: Simon Marchi <simon.marchi@efficios.com> Reviewed-By: Jose E. Marchesi <jose.marchesi@oracle.com>
2022-11-15gdb: use libtool in GDB_AC_CHECK_BFDJose E. Marchesi1-3/+5
The GDB_AC_CHECK_BFD macro defined in gdb/acinclude.m4 uses the AC_LINK_IFELSE autoconf macro in order to link a simple program to check features of libbfd. If libbfd's link dependencies change, it was necessary to reflect them either in the definition of the macro, or as a consequence of checking for them with an autoconf macro resulting in an addition to LIBS. This patch modifies the definition of the GDB_CHECK_BFD macro in order to use libtool to perform the test link. This makes it possible to not have to list dependencies of libbfd (which are indirect to GDB) at all. After this patch: configure:28553: checking for ELF support in BFD configure:28573: ./libtool --quiet --mode=link gcc -o conftest \ -I../../gdb/../include -I../bfd \ -I../../gdb/../bfd -g -O2 \ -L../bfd -L../libiberty conftest.c -lbfd -liberty \ -lncursesw -lm -ldl >&5 configure:28573: $? = 0 configure:28583: result: yes Tests performed: - Configure --with-system-zlib and --without-system-zlib. - Check link dependencies of installed GDB with both --enable-shared and --disable-shared. - Run installed GDB in both cases. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2022-09-28Fix GDB build: ELF support check & -lzstdPedro Alves1-2/+2
GDB fails to build for me, on Ubuntu 20.04. I get: ... CXXLD gdb /usr/bin/ld: linux-tdep.o: in function `linux_corefile_thread(thread_info*, linux_corefile_thread_data*)': /home/pedro/gdb/binutils-gdb/src/gdb/linux-tdep.c:1831: undefined reference to `gcore_elf_build_thread_register_notes(gdbarch*, thread_info*, gdb_signal, bfd*, std::unique_ptr<char, gdb::xfree_deleter<char> >*, int*)' /usr/bin/ld: linux-tdep.o: in function `linux_make_corefile_notes(gdbarch*, bfd*, int*)': /home/pedro/gdb/binutils-gdb/src/gdb/linux-tdep.c:2117: undefined reference to `gcore_elf_make_tdesc_note(bfd*, std::unique_ptr<char, gdb::xfree_deleter<char> >*, int*)' collect2: error: ld returned 1 exit status make[2]: *** [Makefile:2149: gdb] Error 1 make[2]: Leaving directory '/home/pedro/gdb/binutils-gdb/build/gdb' make[1]: *** [Makefile:11847: all-gdb] Error 2 make[1]: Leaving directory '/home/pedro/gdb/binutils-gdb/build' make: *** [Makefile:1004: all] Error 2 Those undefined functions exist in gdb/gcore-elf.c, which is only included in the build if GDB's configure thinks that the target you're configuring for is an ELF target. GDB's configure thinks my system isn't ELF, which is incorrect. For the ELF support check, gdb/config.log shows: configure:17387: checking for ELF support in BFD configure:17407: gcc -o conftest -I/home/pedro/gdb/binutils-gdb/src/gdb/../include -I../bfd -I/home/pedro/gdb/binutils-gdb/src/gdb/../bfd -g3 -O0 -L../bfd -L../libiberty -lzstd conftest.c -lbfd -liberty -lz -lncursesw -lm -ldl >&5 /usr/bin/ld: ../bfd/libbfd.a(compress.o): in function `decompress_contents': /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:42: undefined reference to `ZSTD_decompress' /usr/bin/ld: /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:44: undefined reference to `ZSTD_isError' /usr/bin/ld: ../bfd/libbfd.a(compress.o): in function `bfd_compress_section_contents': /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:195: undefined reference to `ZSTD_compress' /usr/bin/ld: /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:198: undefined reference to `ZSTD_isError' collect2: error: ld returned 1 exit status configure:17407: $? = 1 ... configure:17417: result: no Note how above, in the gcc command line, "-lzstd" appears before "-lbfd". That explain the link failure. It should appear after, like -lz does. This commit fixes it, by moving ZSTD_LIBS from LDFLAGS to LIBS, next to -lz, in GDB_AC_CHECK_BFD, and regenerating gdb/configure. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29630 Change-Id: I1f4128dde634e8ea04c9002904f1005a8b3a6863
2022-09-26binutils, gdb: support zstd compressed debug sectionsFangrui Song1-1/+2
PR29397 PR29563: Add new configure option --with-zstd which defaults to auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support zstd compressed debug sections for most tools. * bfd: for addr2line, objdump --dwarf, gdb, etc * gas: support --compress-debug-sections=zstd * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd * objcopy: support ELFCOMPRESS_ZSTD input for --decompress-debug-sections and --compress-debug-sections=zstd * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd symbols, so gdb has to link against -lzstd in this patch. If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this is too heavyweight, so don't do it for now. ``` % ld/ld-new a.o ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... % ld/ld-new a.o --compress-debug-sections=zstd ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support % binutils/objcopy --compress-debug-sections=zstd a.o b.o binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support % binutils/objcopy b.o --decompress-debug-sections binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... ```
2022-01-13gdb: don't use -Wmissing-prototypes with g++Andrew Burgess1-0/+3
This commit aims to not make use of -Wmissing-prototypes when compiling with g++. Use of -Wmissing-prototypes was added with this commit: commit a0761e34f054767de6d6389929d27e9015fb299b Date: Wed Mar 11 15:15:12 2020 -0400 gdb: enable -Wmissing-prototypes warning Because clang can provide helpful warnings with this flag. Unfortunately, g++ doesn't accept this flag, and will give this warning: cc1plus: warning: command line option ‘-Wmissing-prototypes’ is valid for C/ObjC but not for C++ In theory the fact that this flag is not supported should be detected by the configure check in gdbsupport/warning.m4, but for users of ccache, this check doesn't work due to a long standing ccache issue: https://github.com/ccache/ccache/issues/738 The ccache problem is that -W... options are reordered on the command line, and so -Wmissing-prototypes is seen before -Werror. Usually this doesn't matter, but the above warning (about the flag not being valid) is issued before the -Werror flag is processed, and so is not fatal. There have been two previous attempts to fix this that I'm aware of. The first is: https://sourceware.org/pipermail/gdb-patches/2021-September/182148.html In this attempt, instead of just relying on a compile to check if a flag is valid, the proposal was to both compile and link. As linking doesn't go through ccache, we don't suffer from the argument reordering problem, and the link phase will correctly fail when using -Wmissing-prototypes with g++. The configure script will then disable the use of this flag. This approach was rejected, and the suggestion was to only add the -Wmissing-prototypes flag if we are compiling with gcc. The second attempt, attempts this approach, and can be found here: https://sourceware.org/pipermail/gdb-patches/2021-November/183076.html This attempt only adds the -Wmissing-prototypes flag is the value of GCC is not 'yes'. This feels like it is doing the right thing, unfortunately, the GCC flag is really a 'is gcc like' flag, not a strict, is gcc check. As such, GCC is set to 'yes' for clang, which would mean the flag was not included for clang or gcc. The entire point of the original commit was to add this flag for clang, so clearly the second attempt is not sufficient either. In this new attempt I have added gdbsupport/compiler-type.m4, this file defines AM_GDB_COMPILER_TYPE. This macro sets the variable GDB_COMPILER_TYPE to either 'gcc', 'clang', or 'unknown'. In future the list of values might be extended to cover other compilers, if this is ever useful. I've then modified gdbsupport/warning.m4 to only add the problematic -Wmissing-prototypes flag if GDB_COMPILER_TYPE is not 'gcc'. I've tested this with both gcc and clang and see the expected results, gcc no longer attempts to use the -Wmissing-prototypes flag, while clang continues to use it. When compiling using ccache, I am no longer seeing the warning.
2021-06-19gdb/gdbserver: switch to AC_CONFIG_MACRO_DIRSMike Frysinger1-37/+10
These dirs don't use automake, so use AC_CONFIG_MACRO_DIRS to specify ../config as a search dir for m4 macros. This allows removal of a lot of hand-written m4_include's from acinclude.m4 files, and simplifies use of `aclocal` or `autoreconf` as manual -I is not needed.
2020-11-28GDB: Fix detection of ELF support when configuring with ↵Alex Richardson1-0/+1
-Werror=implicit-function-declaration I am getting I'm sorry, Dave, I can't do that. Symbol format `elf64-littleriscv' unknown. errors after updating from GDB 8.3 to 10. Bisecting showed that since commit 1ff6de031241 ("bfd, ld: add CTF section linking"), bfd.h depends on strncmp() being present, so configuring with -Werror=implicit-function-declaration results in the check for ELF support in BFD failing: .../gdb/gdb/../bfd/elf-bfd.h: In function 'bfd_section_is_ctf': .../gdb/gdb/../bfd/elf-bfd.h:3086:10: error: implicit declaration of function 'strncmp' [-Werror=implicit-function-declaration] return strncmp (name, ".ctf", 4) == 0 && (name[4] == 0 || name[4] == '.'); gdb/ChangeLog: * acincludde.m4 (GDB_AC_CHECK_BFD): Include string.h in the test program. Change-Id: Iec5e21d454c2a544c44d65e23cfde552c424c18e
2020-10-31gdb: modernize acinclude.m4Simon Marchi1-16/+32
Run autoupdate, fix indentation for readability. gdb/ChangeLog: * acinclude.m4: Modernize. * configure: Re-generate. Change-Id: I8949f885326a3206f414776b63a1fdba197bb19a
2020-10-31gdb: use AC_PROG_CC_STDC instead of AM_PROG_CC_STDCSimon Marchi1-108/+0
`autoconf -Wall` notes that AM_PROG_CC_STDC is obsolete: Fixes this autoconf warning: configure.ac:40: warning: 'AM_PROG_CC_STDC': this macro is obsolete. configure.ac:40: You should simply use the 'AC_PROG_CC' macro instead. configure.ac:40: Also, your code should no longer depend upon 'am_cv_prog_cc_stdc', configure.ac:40: but upon 'ac_cv_prog_cc_stdc'. aclocal.m4:770: AM_PROG_CC_STDC is expanded from... configure.ac:40: the top level Since we build with a C++ compiler now, I don't think this is relevant. If you look at the messages removed from gdbsupport/aclocal.m4, it says that this functionality is now integrated in AC_PROG_CC, which we already call. So it might not even make a difference. We had a local version of AM_PROG_CC_STDC, in gdb/acinclude.m4 (only used by gdb/configure.ac), remove it. gdb/ChangeLog: * acinclude.m4 (AM_PROG_CC_STDC): Remove. * configure: Re-generate. * configure.ac: Remove AM_PROG_CC_STDC. gdbsupport/ChangeLog: * aclocal.m4: Re-generate. * configure: Re-generate. * configure.ac: Remove AM_PROG_CC_STDC. Change-Id: Ic824393598805d4f78cda9d119f8af46096e9c73
2020-10-25gdb: move ptrace.m4 to gdbsupportSimon Marchi1-1/+1
ptrace.m4, providing the GDB_AC_PTRACE autoconf macro, is used by gdb, gdbserver and gdbsupport. I think it would make sense to move it to gdbsupport. gdb/ChangeLog: * acinclude.m4: Update ptrace.m4 path. * ptrace.m4: Moved to gdbsupport. gdbserver/ChangeLog: * acinclude.m4: Update ptrace.m4 path. gdbsupport/ChangeLog: * Makefile.in: Re-generate. * acinclude.m4: Update ptrace.m4 path. * ptrace.m4: Move here. Change-Id: I849c149fd5dd8c3b2b0af38654fb353e3727871b
2020-06-26Fix --enable-libctf and --disable-staticNick Alcock1-0/+3
This fixes test runs and compilation when --disable-libctf, --disable-static, or --enable-shared are passed. Changes since v2: Use GCC_ENABLE and fix indentation. Fix prototype using 'void'. Use 'unsupported' and gdb_caching_proc. Changes since v3: Adapt to upstream changes providing skip_ctf_tests. Changes since v4: Adapt to upstream changes in the seven months (!) since I last looked at this. gdb/ChangeLog * configure.ac: Add --enable-libctf: handle --disable-static properly. * acinclude.m4: sinclude ../config/enable.m4. * Makefile.in (aclocal_m4_deps): Adjust accordingly. (LIBCTF): Substitute in. (CTF_DEPS): New, likewise. (CLIBS): libctf needs symbols from libbfd: move earlier. (CDEPS): Use CTF_DEPS, not LIBCTF, now LIBCTF can include rpath flags. * ctfread.c: Surround in ENABLE_LIBCTF. (elfctf_build_psymtabs) [!ENABLE_LIBCTF]: New stub. * configure: Regenerate. * config.in: Likewise. gdb/testsuite/ChangeLog * configure.ac: Add --enable-libctf. * aclocal.m4: sinclude ../config/enable.m4. * Makefile.in (site.exp): Add enable_libctf to site.exp. * lib/gdb.exp (skip_ctf_tests): Use it. * gdb.base/ctf-constvars.exp: Error message tweak. * gdb.base/ctf-ptype.exp: Likewise. * configure: Regenerate.
2020-03-12Move gdb/selftest.m4 to gdbsupport/selftest.m4Simon Marchi1-1/+1
The selftest.m4 file is used by gdb, gdbserver and gdbsupport, I think it belongs in gdbsupport. gdb/ChangeLog: * selftest.m4: Move to gdbsupport/. * acinclude.m4: Update path to selftest.m4. gdbserver/ChangeLog: * acinclude.m4: Update path to selftest.m4. gdbsupport/ChangeLog: * selftest.m4: Moved from gdb/. * acinclude.m4: Update path to selftest.m4.
2020-02-11Move gdb/warning.m4 to gdbsupportSimon Marchi1-1/+1
This file is used by gdbsupport, gdbserver and gdb, so I think it belongs in gdbsupport. Move it there and update the references the various acinclude.m4 files. gdbsupport/ChangeLog: * warning.m4: Move here, from gdb/warning.m4. * acinclude.m4: Update warning.m4 path. * Makefile.in: Re-generate. gdbserver/ChangeLog: * acinclude.m4: Update warning.m4 path. gdb/ChangeLog: * acinclude: Update warning.m4 path. * warning.m4: Move to gdbsupport.
2020-01-14Move gdbsupport to the top levelTom Tromey1-1/+1
This patch moves the gdbsupport directory to the top level. This is the next step in the ongoing project to move gdbserver to the top level. The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport". This patch then adds a build system to gdbsupport and wires it into the top level. Then it changes gdb to use the top-level build. gdbserver, on the other hand, is not yet changed. It still does its own build of gdbsupport. ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport. * MAINTAINERS: Add gdbsupport. * configure: Rebuild. * configure.ac (configdirs): Add gdbsupport. * gdbsupport: New directory, move from gdb/gdbsupport. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * nat/x86-linux-dregs.c: Include configh.h. * nat/linux-ptrace.c: Include configh.h. * nat/linux-btrace.c: Include configh.h. * defs.h: Include config.h, bfd.h. * configure.ac: Don't source common.host. (CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files. * configure: Rebuild. * acinclude.m4: Update path. * Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables. (CONFIG_SRC_SUBDIR): Remove gdbsupport. (INTERNAL_CFLAGS_BASE): Add INCSUPPORT. (CLIBS): Add LIBSUPPORT. (CDEPS): Likewise. (COMMON_SFILES): Remove gdbsupport files. (HFILES_NO_SRCDIR): Likewise. (stamp-version): Update path to create-version.sh. (ALLDEPFILES): Remove gdbsupport files. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * server.h: Include config.h. * gdbreplay.c: Include config.h. * configure: Rebuild. * configure.ac: Don't source common.host. * acinclude.m4: Update path. * Makefile.in (INCSUPPORT): New variable. (INCLUDE_CFLAGS): Add INCSUPPORT. (SFILES): Update paths. (version-generated.c): Update path to create-version.sh. (gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * common-defs.h: Add GDBSERVER case. Update includes. * acinclude.m4, aclocal.m4, config.in, configure, configure.ac, Makefile.am, Makefile.in, README: New files. * Moved from ../gdb/gdbsupport/ Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2020-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files.
2019-11-26Add configure check for std::threadTom Tromey1-0/+2
This adds a configure check for std::thread. This is needed because std::thread is not available on some systems, like some versions of mingw and DJGPP. This also adds configury to make sure that a threaded gdb links against the correct threading library (-lpthread or the like), and passes the right flags (e.g., -pthread) to the compilations. Note that this also links gdbserver against the thread library. This is not strictly necessary at this point in the series, but a later patch will change gdbsupport to use pthread_sigmask, at which point this will be needed. gdb/ChangeLog 2019-11-26 Tom Tromey <tom@tromey.com> * acinclude.m4: Include ax_pthread.m4. * Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables. (INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS. (CLIBS): Use PTHREAD_LIBS. (aclocal_m4_deps): Add ax_pthread.m4. * config.in, configure: Rebuild. * gdbsupport/common.m4 (GDB_AC_COMMON): Check for std::thread. gdb/gdbserver/ChangeLog 2019-11-26 Tom Tromey <tom@tromey.com> * Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables. (INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS. (GDBSERVER_LIBS): Use PTHREAD_LIBS. * acinclude.m4: Include ax_pthread.m4. * config.in, configure: Rebuild. Change-Id: I00ec55db6077f2615421a93461fc3be57e916aa0
2019-10-23Use m4_include, not sinclude in .m4 filesTom Tromey1-22/+22
Pedro pointed out that sinclude does not error if a file is missing. This patch changes gdb to only use m4_include, which seems more correct. gdb/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * configure: Rebuild. * acinclude.m4: Use m4_include, not sinclude. gdb/gdbserver/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * configure: Rebuild. * acinclude.m4: Use m4_include, not sinclude. gdb/testsuite/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * configure: Rebuild. * aclocal.m4: Use m4_include, not sinclude. Change-Id: I970362e0af7875f9f72796401126acf0ff6dba11
2019-08-06[PR build/24886] disable glibc mcheck supportFrank Ch. Eigler1-3/+0
This patch drops gdb's configury support for glibc's mcheck function. It has been observed to cause false abort()s, because it is thread-unsafe yet interposes every malloc/free operation. So if any library transitively used by gdb also uses threads, then these functions can easily corrupt their own checking data. These days, gcc ASAN and valgrind provide high quality checking, and mcheck is apparently itself being slowly deprecated. So, let's stop linking to it. Attached patch drops the autoconf/Makefile machinery for both gdb and gdbserver. No testsuite-visible impact. IMHO not worth mentioning in NEWS. See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939 gdb/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * libmcheck.m4: Remove. * acinclude.m4: Don't include it. * Makefile.in: Don't distribute it. * top.c (print_gdb_configuration): Don't mention it. gdb/gdbserver/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * acinclude.m4: Don't include it.
2019-07-09Rename common to gdbsupportTom Tromey1-1/+1
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-10-10Add parameter to allow enabling/disabling selftests via configureSergio Durigan Junior1-0/+3
This is a follow-up of: https://sourceware.org/ml/gdb-patches/2018-08/msg00347.html Instead of going throttle and always enabling our selftests (even in non-development builds), this patch is a bit more conservative and introduces a configure option ("--enable-unit-tests") that allows the user to choose whether she wants unit tests in the build or not. Note that the current behaviour is retained: if no option is provided, GDB will have selftests included in a development build, and will *not* have selftests included in a non-development build. The rationale for having this option is still the same: due to the many racy testcases and random failures we see when running the GDB testsuite, it is unfortunately not possible to perform a full test when one is building a downstream package. As the Fedora GDB maintainer and one of the Debian GDB uploaders, I feel like this situation could be improved by, at least, executing our selftests after the package has been built. This patch introduces no regressions to our build. OK? gdb/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * README (`configure' options): Add documentation for new "--enable-unit-tests" option. * acinclude.m4: Include "selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * maint.c (maintenance_selftest): Update message informing that selftests have been disabled. (maintenance_info_selftests): Likewise. * selftest.m4: New file. gdb/gdbserver/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * acinclude.m4: Include "../selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * configure.srv: Use "$enable_unittests" instead of "$development" when checking whether unit tests have been enabled. * server.c (captured_main): Update message informing that selftests have been disabled. gdb/testsuite/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.gdb/unittest.exp: Update expected message informing that selftests have been disabled. * gdb.server/unittest.exp: Likewise. squash! Add parameter to allow enabling/disabling selftests via configure
2018-10-03Add --enable-ubsanTom Tromey1-0/+3
This adds --enable-ubsan to gdb's configure. By default it is enabled in development mode, and disabled otherwise. This passes both -fsanitize=undefined and -fno-sanitize-recover=undefined to compilations, so that undefined behavior violations will be sure to cause test failures. gdb/ChangeLog 2018-10-03 Tom Tromey <tom@tromey.com> * README: Mention --enable-ubsan. * NEWS: Mention --enable-ubsan. * acinclude.m4: Include sanitize.m4. * configure: Rebuild. * configure.ac: Call AM_GDB_UBSAN. * sanitize.m4: New file. gdb/doc/ChangeLog 2018-10-03 Tom Tromey <tom@tromey.com> * gdb.texinfo (Configure Options): Document --enable-ubsan.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-10-28gdb: Require C++11Pedro Alves1-0/+2
Use AX_CXX_COMPILE_STDCXX to detect if the compiler supports C++11, and if -std=xxx switches are necessary to enable C++11. We need to tweak AX_CXX_COMPILE_STDCXX a bit though. Pristine upstream AX_CXX_COMPILE_STDCXX appends -std=gnu++11 to CXX directly. That doesn't work for us, because the top level Makefile passes CXX down to subdirs, and that overrides whatever gdb/Makefile may set CXX to. The result would be that a make invocation from the build/gdb/ directory would use "g++ -std=gnu++11" as expected, while a make invocation at the top level would not. So instead of having AX_CXX_COMPILE_STDCXX set CXX directly, tweak it to AC_SUBST a separate variable -- CXX_DIALECT -- and use '$(CXX) (CXX_DIALECT)' to compile/link. Confirmed that this enables C++11 starting with gcc 4.8, the first gcc release with full C++11 support. Also confirmed that configure errors out gracefully with older GCC releases: checking whether /opt/gcc-4.7/bin/g++ supports C++11 features by default... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++0x... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++0x... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with +std=c++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -h std=c++11... no configure: error: *** A compiler with support for C++11 language features is required. Makefile:9451: recipe for target 'configure-gdb' failed make[1]: *** [configure-gdb] Error 1 make[1]: Leaving directory '/home/pedro/brno/pedro/gdb/mygit/cxx-convertion/build-gcc-4.7' If we need to revert back to making C++11 optional, all that's necessary is to change the "mandatory" to "optional" in configure.ac and regenerate configure (both gdb and gdbserver). gdb/ChangeLog: 2016-10-28 Pedro Alves <palves@redhat.com> * Makefile.in (CXX_DIALECT): Get from configure. (COMPILE.pre, CC_LD): Append $(CXX_DIALECT). (FLAGS_TO_PASS): Pass CXX_DIALECT. * acinclude.m4: Include ax_cxx_compile_stdcxx.m4. * ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP. * configure.ac: Call AX_CXX_COMPILE_STDCXX. * config.in: Regenerate. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2016-10-28 Pedro Alves <palves@redhat.com> * Makefile.in (CXX_DIALECT): Get from configure. (COMPILE.pre, CC_LD): Append $(CXX_DIALECT). * acinclude.m4: Include ../ax_cxx_compile_stdcxx.m4. * configure.ac: Call AX_CXX_COMPILE_STDCXX. * config.in: Regenerate. * configure: Regenerate.
2016-09-05gdb/: Require a C++ compilerPedro Alves1-3/+0
This removes all support for building gdb & gdbserver with a C compiler from gdb & gdbserver's build machinery. gdb/ChangeLog: 2016-09-05 Pedro Alves <palves@redhat.com> * NEWS: Mention that a C++ compiler is now required. * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove. (COMPILE.pre, CC_LD): Use CXX directly. (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly. * acinclude.m4: Don't include build-with-cxx.m4. * build-with-cxx.m4: Delete file. * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call. * warning.m4: Assume $enable_build_with_cxx is yes. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2016-09-05 Pedro Alves <palves@redhat.com> * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove. (COMPILE.pre, CC_LD): Use CXX directly. (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly. * acinclude.m4: Don't include build-with-cxx.m4. * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call. * configure: Regenerate.
2016-01-11gdb: split out warnings helpersMike Frysinger1-0/+3
This will allow the sim tree to use the same set of warnings. The new code in warning.m4 is exactly the same (other than the AC_DEFUN wrapping).
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-08-06Yaakov Selkowitz: fixes for in-tree libiconvDJ Delorie1-125/+2
* Makefile.def (libiconv): Define bootstrap=true. Mark pdf/html/info as missing. (configure-gcc): Depend on all-libiconv. (all-gcc): Ditto. (configure-libcpp): Ditto. (all-libcpp): Ditto. (configure-intl): Ditto. (all-intl): Ditto. * Makefile.in: Regenerate. binutils/ * configure: Regenerate. gdb/ * Makefile.in (LIBICONV): Define. (CLIBS): Add LIBICONV. * acinclude.m4: Use config/iconv.m4 instead of custom AM_ICONV. * configure: Regenerate.
2015-07-24make gdbserver use the same ptrace autoconf checks as gdbPedro Alves1-0/+3
This factors the ptrace checks out of gdb's configure.ac to a new ptrace.m4 file, and then makes gdbserver's configure.ac source it too. gdb/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * acinclude.m4: Include ptrace.m4. * configure.ac: Call GDB_AC_PTRACE and move ptrace checks ... * ptrace.m4: ... to this new file. gdb/gdbserver/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * acinclude.m4: Include ../ptrace.m4. * configure.ac: Call GDB_AC_PTRACE. * config.in, configure: Regenerate.
2015-04-09Replace $zlibdir with $ZLIBDIR in LDFLAGSH.J. Lu1-1/+2
* acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir. Replace $zlibdir with $ZLIBDIR in LDFLAGS. * configure: Regenerated.
2015-03-31Add --with-system-zlib in gdbH.J. Lu1-2/+2
This patch adds --with-system-zlib and removes --with-zlib in gdb. * Makefile.in (ZLIB): New. (ZLIBINC): Likewise. (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC). (CLIBS): Add $(ZLIB). * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS. Add -lz to LIBS. * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>. * top.c (print_gdb_configuration): Remove --with-zlib and --without-zlib. * config.in: Regenerated. * configure: Likewise.
2015-02-27Add --enable-build-with-cxx configure switchPedro Alves1-0/+3
This new option, disabled by default for now, allows specifying whether to build GDB, GDBserver, and friends with a C++ (98/03) compiler. The name of the switch should be familiar to those who followed GCC's own C++ conversion process. . Adding -fpermissive to COMPILER in C++ mode (see the new build-with-cxx.m4 file) makes errors like these be warnings instead: gdb/infrun.c:6597:1: error: initializing argument 1 of ‘void sig_print_info(gdb_signal)’ [-fpermissive] sig_print_info (enum gdb_signal oursig) ^ gdb/infrun.c: In function ‘void do_restore_infcall_suspend_state_cleanup(void*)’: gdb/infrun.c:7164:39: error: invalid conversion from ‘void*’ to ‘infcall_suspend_state*’ [-fpermissive] restore_infcall_suspend_state (state); ^ so that the compiler carries on compiling the file. -Werror still catches the warnings, so nothing is lost, only our lifes are made easier by concentrating on getting other more important things out of the way first. There's no way to quiet those warnings. Until they're all fixed, when building in C++ mode, -Werror is disabled by default. . Adding -Wno-narrowing suppresses thousands of instances of this warning: gdb/arm-linux-tdep.c:439:1: error: narrowing conversion of ‘-1’ from ‘int’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing] gdb/arm-linux-tdep.c:439:1: error: narrowing conversion of ‘-1l’ from ‘LONGEST {aka long int}’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing] gdb/arm-linux-tdep.c:450:1: error: narrowing conversion of ‘-1’ from ‘int’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing] We can defer handling those until we target C++11. . Adding -Wno-sign-compare suppresses thousands of instances of this warning: gdb/linux-record.c:1763:32: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (tmpulongest == tdep->fcntl_F_GETLK64) ^ . Adding -Wno-write-strings suppresses thousands of instances of this warning: gdb/mi/mi-cmd-var.c: In function ‘void mi_cmd_var_show_attributes(char*, char**, int)’: gdb/mi/mi-cmd-var.c:514:12: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings] attstr = "editable"; ^ gdb/mi/mi-cmd-var.c:516:12: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings] attstr = "noneditable"; ^ For now, it's best to hide these warnings from view until we're '-fpermissive'-clean, and can thus start building with -Werror. The C compiler has always managed to build working GDBs with these issues in the code, so a C++ compiler should too. gdb/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> * Makefile.in (COMPILER): New, get it from autoconf. (COMPILE.pre, CC_LD): Use COMPILER. (CXX): Get from autoconf instead. (CXX_FOR_TARGET): Default to g++ instead of gcc. * acinclude.m4: Include build-with-cxx.m4. * build-with-cxx.m4: New file. * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX. Disable -Werror by default if building in C++ mode. (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode. Run supported-warning-flags tests with the C++ compiler. Save/restore CXXFLAGS too. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> * Makefile.in (COMPILER): New, get it from autoconf. (CXX): Get from autoconf instead. (COMPILE.pre): Use COMPILER. (CC-LD): Rename to ... (CC_LD): ... this. Use COMPILER. (gdbserver$(EXEEXT), gdbreplay$(EXEEXT), $(IPA_LIB)): Adjust. (CXX_FOR_TARGET): Default to g++ instead of gcc. * acinclude.m4: Include build-with-cxx.m4. * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX. Disable -Werror by default if building in C++ mode. (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and -Wno-narrowing in C++ mode. Run supported-warning-flags tests with the C++ compiler. Save/restore CXXFLAGS too. * configure: Regenerate.
2015-02-27Create libiberty.m4, have GDB and GDBserver use itPedro Alves1-0/+3
Converting GDB to be a C++ program, I stumbled on 'basename' issues, like: src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char*)’ /usr/include/string.h:597:26: error: ambiguates old declaration ‘const char* basename(const char*)’ which I believe led to this bit in gold's configure.ac: dnl We have to check these in C, not C++, because autoconf generates dnl tests which have no type information, and current glibc provides dnl multiple declarations of functions like basename when compiling dnl with C++. AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp]) These checks IIUC intend to generate all the HAVE_DECL_FOO symbols that libiberty.h and ansidecl.h check. GDB is missing these checks currently, which results in the conflict shown above. This adds an m4 file that both GDB and GDBserver's configury use to pull in the autoconf checks that libiberty clients needs done in order to use these libiberty.h/ansidecl.h. gdb/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> * libiberty.m4: New file. * acinclude.m4: Include libiberty.m4. * configure.ac: Call libiberty_INIT. * config.in, configure: Regenerate. gdb/gdbserver/ 2015-02-27 Pedro Alves <palves@redhat.com> * acinclude.m4: Include libiberty.m4. * configure.ac: Call libiberty_INIT. * config.in, configure: Regenerate.
2015-02-18Factorize target program transformations in the GDB_AC_TRANSFORM macro.Jose E. Marchesi1-0/+3
This patch introduces a new M4 macro GDB_AC_TRANSFORM to avoid repeating the common idiom which is the transformation of target program names, i.e. from gdb to sparc64-linux-gnu-gdb. It also makes gdb/configure.ac and gdb/testsuite/configure.ac to use the new macro. gdb/ChangeLog: 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com> * configure: Regenerated. * configure.ac: Use GDB_AC_TRANSFORM. * Makefile.in (aclocal_m4_deps): Added transform.m4. * acinclude.m4: sinclude transform.m4. * transform.m4: New file. (GDB_AC_TRANSFORM): New macro. gdb/testsuite/ChangeLog: 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com> * configure: Regenerated. * configure.ac: Use GDB_AC_TRANSFORM. * aclocal.m4: sinclude ../transform.m4.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-09-09PR guile/17367Doug Evans1-2/+2
gdb/ChangeLog: * acinclude.m4 (GDB_GUILE_PROGRAM_NAMES): Pass guile version as last parameter to pkg-config, not first. * configure.ac: Pass --with-guile provided pkg-config path to GDB_GUILE_PROGRAM_NAMES. * configure: Regenerate.
2014-08-19Fix --diable-shared --enable-plugins build breakageAlan Modra1-4/+0
Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files.
2014-07-26PR guile/17146Doug Evans1-0/+72
* acinclude.m4 (GDB_GUILE_PROGRAM_NAMES): New macro. (GDB_GUILD_TARGET_FLAG, GDB_TRY_GUILD): New macros. * configure.ac: Try to use guild to compile an scm file, if it fails then disable guile support. * configure: Regenerate. * data-directory/Makefile.in (GUILE_SOURCE_FILES): Renamed from GUILE_FILE_LIST. (GUILE_COMPILED_FILES): New variable. (GUILE_FILES) Update. (GUILD, GUILD_TARGET_FLAG, GUILD_COMPILE_FLAGS): New variables. (stamp-guile): Compile scm files. * guile/guile.c (boot_guile_support): New function. (standard_throw_args_p): New function. (print_standard_throw_error, print_throw_error): New functions. (handle_boot_error): New function. (initialize_scheme_side): Rewrite to call boot_guile_support. * guile/lib/gdb/boot.scm: Update %load-compiled-path. Load gdb.go. * guile/lib/gdb/init.scm (%silence-compiler-warnings%): New function.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-11-08introduce common.m4Tom Tromey1-0/+2
It has bothered me for a while that files in common/ use macros defined via autoconf checks, but rely on each configure.ac doing the proper checks independently. This patch introduces common/common.m4 which consolidates the checks assumed by code in common. The rule I propose is that if something is needed or used by common, it should be checked for by common.m4. However, if the check is also needed by gdb or gdbserver, then it should be duplicated there. Built and regtested on x86-64 Fedora 18 (though this is hardly the most strenuous case) and using the Fedora 18 mingw cross compilers. I also examined the config.in diffs to ensure that symbols did not go missing. 2013-11-08 Tom Tromey <tromey@redhat.com> * acinclude.m4: Include common.m4. * common/common.m4: New file. * configure, config.in: Rebuild. * configure.ac: Use GDB_AC_COMMON. 2013-11-08 Tom Tromey <tromey@redhat.com> * acinclude.m4: Include common.m4, codeset.m4. * configure, config.in: Rebuild. * configure.ac: Use GDB_AC_COMMON.
2013-07-03On mainline/development, also link GDBserver with -lmcheck.Pedro Alves1-0/+3
This factors --enable-libmcheck related bits from GDB's configure.ac and makes GDBserver use them too. Specifically, the 'development' global is moved to a separate script to it can be sourced by both GDB and GDBserver, and the --enable-libmcheck/--disable-libmcheck bits proper are moved to a new m4 file. I started out by defining 'development' in the m4 file, but in the end decided against it, as a separate script has the advantage that changing it in release branches does not require regenerating configure, unlike today. I had also started out by making the new GDB_AC_LIBMCHECK itself handle the yes/no default fallback depending on release/developement, but since I had split out 'development' to a separate script, and, GDB needs the python checks anyway (hence we'd need to do the python checks in gdb's configure.ac, and pass in a 'default lmcheck yes/no' parameter to GDB_AC_LIBMCHECK anyway), I ended up keeping GDB_AC_LIBMCHECK isolated from the 'development' global. IOW, it's the caller's business to handle it. Tested on x86_64 Fedora 17. Built GDB and GDBserver with and without --enable-libmcheck, and observed --enable-libmcheck overrides the disablement of -lmcheck caused by python supporting threads, and that GDBserver links with -lmcheck when expected. Also observed that changing the 'development' global, and issuing "make" triggers a relink, and '-lmcheck' is included or not from the link accordingly. gdb/ 2013-07-03 Pedro Alves <palves@redhat.com> * Makefile.in (config.status): Depend on development.sh. (aclocal_m4_deps): Add libmcheck.m4. * acinclude.m4: Include libmcheck.m4. * configure.ac: Source development.sh instead of setting 'development' here. --enable-libmcheck/--disable-libmcheck code factored out to GDB_AC_LIBMCHECK. Run it. * development.sh: New file. * libmcheck.m4: New file. * configure: Regenerate. gdb/gdbserver/ 2013-07-03 Pedro Alves <palves@redhat.com> * Makefile.in (config.status): Depend on development.sh. * acinclude.m4: Include libmcheck.m4. * configure: Regenerate.
2013-05-17Replace hardcoded -ldl with check for availabilityH.J. Lu1-1/+1
2013-05-17 Pavel Chupin <pavel.v.chupin@intel.com> * acinclude.m4: Add check for dlopen in libdl. * configure.ac: Ditto. * configure: Regenerate.
2013-01-172013-01-17 Pedro Alves <palves@redhat.com>Pedro Alves1-2/+15
* acinclude.m4: Include ../config/plugins.m4, ../config/largefile.m4 and ../config/lead-dot.m4. Add comments. * Makefile.in (aclocal_m4_deps): Update. * aclocal.m4: Renegerate.
2013-01-02 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.Tom Tromey1-0/+34
* configure.ac: Use GDB_AC_CHECK_BFD. * configure: Rebuild.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-2/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-12-19update copyright notices in various GDB files.Joel Brobecker1-3/+1
Update some files in GDB that were accidently left with a GPL v2 copyright header. Update some files where the copyright notice still provides the old contact info, using the approach for providing the FSF's contact info. gdb/ChangeLog: * acinclude.m4: Update contact info in copyright notice. gdb/doc/ChangeLog: * refcard.tex: Update copyright notice to GPL v3 or later. Update contact info. gdb/testsuite/ChangeLog: * dg-extract-results.sh: Update contact info in copyright notice. * gdb.arch/mips-octeon-bbit.exp: Update copyright notice to GPL v3 or later. Update contact info. * gdb.fortran/logical.f90, gdb.threads/watchpoint-fork-child.c, gdb.threads/watchpoint-fork-mt.c, gdb.threads/watchpoint-fork-parent.c, gdb.threads/watchpoint-fork-st.c, gdb.threads/watchpoint-fork.h: Likewise.
2012-12-13 * acinclude.m4 (CY_AC_C_WORKS): Remove.Tom Tromey1-25/+1
generated by cgit v1.1 at 2024-11-24 17:22:56 +0000