aboutsummaryrefslogtreecommitdiff
path: root/gdb/aarch64-linux-nat.c
AgeCommit message (Collapse)AuthorFilesLines
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-10-15aarch64 multi-arch part 6: HW breakpoint on unaligned addressYao Qi1-2/+6
Nowadays, both aarch64 GDB and linux kernel assumes that address for setting breakpoint should be 4-byte aligned. However that is not true after we support multi-arch, because thumb instruction can be at 2-byte aligned address. Patch http://lists.infradead.org/pipermail/linux-arm-kernel/2015-October/375141.html to linux kernel is to teach kernel to handle 2-byte aligned address for HW breakpoint, while this patch is to teach aarch64 GDB handle 2-byte aligned address. First of all, we call gdbarch_breakpoint_from_pc to get the instruction length rather than using hard-coded 4. Secondly, in GDBserver, we set length back to 2 if it is 3, because GDB encode 3 in it to indicate it is a 32-bit thumb breakpoint. Then we relax the address alignment check from 4-byte aligned to 2-byte aligned. This patch enables some tests (such as gdb.base/break-idempotent.exp, gdb.base/cond-eval-mode.exp, gdb.base/watchpoint-reuse-slot.exp,) and fixes many fails (such as gdb.base/hbreak2.exp) when the program is compiled in thumb mode on aarch64. Regression tested on aarch64-linux, both native and gdbserver. This is the last patch of multi-arch work. gdb: 2015-10-15 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Call gdbarch_breakpoint_from_pc to instruction length. (aarch64_linux_remove_hw_breakpoint): Likewise. * common/common-regcache.h (regcache_register_size): Declare. * nat/aarch64-linux-hw-point.c: Include "common-regcache.h". (aarch64_point_is_aligned): Set alignment to 2 for breakpoint if the process is 32bit, otherwise set alignment to 4. (aarch64_handle_breakpoint): Update comments. * regcache.c (regcache_register_size): New function. gdb/gdbserver: 2015-10-15 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (aarch64_insert_point): Set len to 2 if it is 3. (aarch64_remove_point): Likewise. * regcache.c (regcache_register_size): New function.
2015-09-18aarch64 multi-arch (part 3): get thread areaYao Qi1-14/+3
With the kernle fix <http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/356511.html>, aarch64 GDB is able to read the base of thread area of 32-bit arm program through NT_ARM_TLS. This patch is to teach both GDB and GDBserver to read the base of thread area correctly in the multi-arch case. A new function aarch64_ps_get_thread_area is added, and is shared between GDB and GDBserver. With this patch applied, the following fails in multi-arch testing (GDB is aarch64 but the test cases are arm) are fixed, -FAIL: gdb.threads/tls-nodebug.exp: thread local storage -FAIL: gdb.threads/tls-shared.exp: print thread local storage variable -FAIL: gdb.threads/tls-so_extern.exp: print thread local storage variable -FAIL: gdb.threads/tls-var.exp: print tls_var -FAIL: gdb.threads/tls.exp: first thread local storage -FAIL: gdb.threads/tls.exp: first another thread local storage -FAIL: gdb.threads/tls.exp: p a_thread_local -FAIL: gdb.threads/tls.exp: p file2_thread_local -FAIL: gdb.threads/tls.exp: p a_thread_local second time gdb: 2015-09-18 Yao Qi <yao.qi@linaro.org> * nat/aarch64-linux.c: Include elf/common.h, nat/gdb_ptrace.h, asm/ptrace.h and sys/uio.h. (aarch64_ps_get_thread_area): New function. * nat/aarch64-linux.h: Include gdb_proc_service.h. (aarch64_ps_get_thread_area): Declare. * aarch64-linux-nat.c (ps_get_thread_area): Call aarch64_ps_get_thread_area. gdb/gdbserver: 2015-09-18 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c: Don't include sys/uio.h. (ps_get_thread_area): Call aarch64_ps_get_thread_area.
2015-09-15Support single step by arch or targetYao Qi1-0/+9
Nowadays, GDB only knows whether architecture supports hardware single step or software single step (through gdbarch hook software_single_step), and for a given instruction or instruction sequence, GDB knows how to do single step (hardware or software). However, GDB doesn't know whether the target supports hardware single step. It is possible that the architecture doesn't support hardware single step, such as arm, but the target supports, such as simulator. This was discussed in this thread https://www.sourceware.org/ml/gdb/2009-12/msg00033.html before. I encounter this problem for aarch64 multi-arch support. When aarch64 debugs arm program, gdbarch is arm, so software single step is still used. However, the underneath linux kernel does support hardware single step, so IWBN to use it. This patch is to add a new target_ops hook to_can_do_single_step, and only use it in arm_linux_software_single_step to decide whether or not to use hardware single step. On the native aarch64 linux target, 1 is returned. On other targets, -1 is returned. On the remote target, if the target supports s and S actions in the vCont? reply, then target can do single step. However, old GDBserver will send s and S in the reply to vCont?, which will confuse new GDB. For example, old GDBserver on arm-linux will send s and S in the reply to vCont?, but it doesn't support hardware single step. On the other hand, new GDBserver, on arm-linux for example, will not send s and S in the reply to vCont?, but old GDB thinks it doesn't support vCont packet at all. In order to address this problem, I add a new qSupported feature vContSupported, which indicates GDB wants to know the supported actions in the reply to vCont?, and qSupported response contains vContSupported if the stub is able tell supported vCont actions in the reply of vCont?. If the patched GDB talks with patched GDBserver on x86, the RSP traffic is like this: -> $qSupported:...+;vContSupported+ <- ...+;vContSupported+ ... -> $vCont? <- vCont;c;C;t;s;S;r then, GDB knows the stub can do single step, and may stop using software single step even the architecture doesn't support hardware single step. If the patched GDB talks with patched GDBserver on arm, the last vCont? reply will become: <- vCont;c;C;t GDB thinks the target doesn't support single step, so it will use software single step. If the patched GDB talks with unpatched GDBserver, the RSP traffic is like this: -> $qSupported:...+;vContSupported+ <- ...+ ... -> $vCont? <- vCont;c;C;t;s;S;r although GDBserver returns s and S, GDB still thinks GDBserver may not support single step because it doesn't support vContSupported. If the unpatched GDB talks with patched GDBserver on x86, the RSP traffic is like: -> $qSupported:...+; <- ...+;vContSupported+ ... -> $vCont? <- vCont;c;C;t;s;S;r Since GDB doesn't sent vContSupported in the qSupported feature, GDBserver sends s and S regardless of the support of hardware single step. gdb: 2015-09-15 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_can_do_single_step): New function. (_initialize_aarch64_linux_nat): Install it to to_can_do_single_step. * arm-linux-tdep.c (arm_linux_software_single_step): Return 0 if target_can_do_single_step returns 1. * remote.c (struct vCont_action_support) <s, S>: New fields. (PACKET_vContSupported): New enum. (remote_protocol_features): New element for vContSupported. (remote_query_supported): Append "vContSupported+". (remote_vcont_probe): Remove support_s and support_S, use rs->supports_vCont.s and rs->supports_vCont.S instead. Disable vCont packet if c and C actions are not supported. (remote_can_do_single_step): New function. (init_remote_ops): Install it to to_can_do_single_step. (_initialize_remote): Call add_packet_config_cmd. * target.h (struct target_ops) <to_can_do_single_step>: New field. (target_can_do_single_step): New macro. * target-delegates.c: Re-generated. gdb/gdbserver: 2015-09-15 Yao Qi <yao.qi@linaro.org> * server.c (vCont_supported): New global variable. (handle_query): Set vCont_supported to 1 if "vContSupported+" matches. Append ";vContSupported+" to own_buf. (handle_v_requests): Append ";s;S" to own_buf if target supports hardware single step or vCont_supported is false. (capture_main): Set vCont_supported to zero. gdb/doc: 2015-09-15 Yao Qi <yao.qi@linaro.org> * gdb.texinfo (General Query Packets): Add vContSupported to tables of 'gdbfeatures' and 'stub features' supported in the qSupported packet, as well as to the list containing stub feature details.
2015-09-15aarch64 multi-arch support (part 2): siginfo fixupYao Qi1-0/+31
This patch is to fixup the siginfo_t when aarch64 gdb or gdbserver read from or write to the arm inferior. It is to convert the "struct siginfo_t" between aarch64 and arm, which is quite mechanical. gdb/gdbserver: 2015-09-15 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (aarch64_linux_siginfo_fixup): New function. (struct linux_target_ops the_low_target): Install aarch64_linux_siginfo_fixup. gdb: 2015-09-15 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_siginfo_fixup): New function. (_initialize_aarch64_linux_nat): Call linux_nat_set_siginfo_fixup. * nat/aarch64-linux.c (aarch64_compat_siginfo_from_siginfo): New function. (aarch64_siginfo_from_compat_siginfo): New function. * nat/aarch64-linux.h: Include signal.h. (compat_int_t, compat_uptr_t, compat_time_t): Typedef. (compat_timer_t, compat_clock_t): Likewise. (struct compat_timeval): New. (union compat_sigval): New. (struct compat_siginfo): New. (cpt_si_pid, cpt_si_uid, cpt_si_timerid): New macros. (cpt_si_overrun, cpt_si_status, cpt_si_utime): Likewise. (cpt_si_stime, cpt_si_ptr, cpt_si_addr): Likewise. (cpt_si_band, cpt_si_fd): Likewise.
2015-09-03[aarch64] Check region OK for HW watchpoint in GDBserverYao Qi1-32/+1
Nowadays, if user requests HW watchpoint to monitor a large memory area or unaligned area, aarch64 GDB will split into multiple aligned areas, and use multiple debugging registers to watch them. However, the registers are not updated in a transaction way. GDBserver doesn't revert updates in previous iterations if some debugging registers fail to update due to some reason, like no free debugging registers available, in the latter iteration. For example, if we have a char buf[34], and watch buf in gdb, (gdb) watch buf Hardware watchpoint 2: buf (gdb) c Continuing. infrun: clear_proceed_status_thread (Thread 13466) infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT) infrun: step-over queue now empty infrun: resuming [Thread 13466] for step-over Sending packet: $m410838,22#35...Packet received: 00000000000000000000000000000000000000000000000000000000000000000000 infrun: skipping breakpoint: stepping past insn at: 0x400524 infrun: skipping breakpoint: stepping past insn at: 0x400524 Sending packet: $Z2,410838,22#80...Packet received: E01 <----- [1] Packet Z2 (write-watchpoint) is supported Sending packet: $Z0,7fb7fe0a8c,4#43...Packet received: OK Warning: Could not insert hardware watchpoint 2. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. GDB receives E01 for Z2 packet [1] but GDBserver updates the debugging register status, insert_point (addr=0x00410838, len=34, type=hw-write-watchpoint): BREAKPOINTs: BP0: addr=0x0, ctrl=0x00000000, ref.count=0 BP1: addr=0x0, ctrl=0x00000000, ref.count=0 BP2: addr=0x0, ctrl=0x00000000, ref.count=0 BP3: addr=0x0, ctrl=0x00000000, ref.count=0 BP4: addr=0x0, ctrl=0x00000000, ref.count=0 BP5: addr=0x0, ctrl=0x00000000, ref.count=0 WATCHPOINTs: WP0: addr=0x410850, ctrl=0x00001ff5, ref.count=1 WP1: addr=0x410848, ctrl=0x00001ff5, ref.count=1 WP2: addr=0x410840, ctrl=0x00001ff5, ref.count=1 WP3: addr=0x410838, ctrl=0x00001ff5, ref.count=1 four debugging registers can not monitor 34-byte long area, so the last iteration of updating debugging register state fails but previous iterations succeed. This makes GDB think no HW watchpoint is inserted but some debugging registers are used. This problem was exposed by "watch buf" gdb.base/watchpoint.exp with aarch64 GDBserver debugging arm 32-bit program. The buf is 30-byte long but 4-byte aligned, and four debugging registers can't cover 34-byte (extend 4 bytes to be 8-byte aligned) area. However, this problem does exist on non-multi-arch debugging scenario as well. This patch moves code in aarch64_linux_region_ok_for_hw_watchpoint to aarch64_linux_region_ok_for_watchpoint in nat/aarch64-linux-hw-point.c. Then, checks with aarch64_linux_region_ok_for_watchpoint, like what we are doing in GDB. If the region is OK, call aarch64_handle_watchpoint. Regression tested on aarch64 with both 64-bit program and 32-bit program. Some fails in gdb.base/watchpoint.exp are fixed. gdb: 2015-09-03 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_region_ok_for_hw_watchpoint): Move code to aarch64_linux_region_ok_for_watchpoint. Call aarch64_linux_region_ok_for_watchpoint. * nat/aarch64-linux-hw-point.c (aarch64_linux_region_ok_for_watchpoint): New function. * nat/aarch64-linux-hw-point.h (aarch64_linux_region_ok_for_watchpoint): Declare it. gdb/gdbserver: 2015-09-03 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (aarch64_insert_point): Call aarch64_handle_watchpoint if aarch64_linux_region_ok_for_watchpoint returns true.
2015-08-26Replace some xmalloc-family functions with XNEW-family onesSimon Marchi1-1/+1
This patch is part of the make-gdb-buildable-in-C++ effort. The idea is to change some calls to the xmalloc family of functions to calls to the equivalents in the XNEW family. This avoids adding an explicit cast, so it keeps the code a bit more readable. Some of them also map relatively well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be possible to do scripted replacements if needed. I only changed calls that were obviously allocating memory for one or multiple "objects". Allocation of variable sizes (such as strings or buffer handling) will be for later (and won't use XNEW). - xmalloc (sizeof (struct foo)) -> XNEW (struct foo) - xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num) - xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo) - xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num) - xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num) - obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo) - obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num) - alloca (sizeof (struct foo)) -> XALLOCA (struct foo) - alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num) Some instances of xmalloc followed by memset to zero the buffer were replaced by XCNEW or XCNEWVEC. I regtested on x86-64, Ubuntu 14.04, but the patch touches many architecture-specific files. For those I'll have to rely on the buildbot or people complaining that I broke their gdb. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_add_process): Likewise. * aarch64-tdep.c (aarch64_gdbarch_init): Likewise. * ada-exp.y (write_ambiguous_var): Likewise. * ada-lang.c (resolve_subexp): Likewise. (user_select_syms): Likewise. (assign_aggregate): Likewise. (ada_evaluate_subexp): Likewise. (cache_symbol): Likewise. * addrmap.c (allocate_key): Likewise. (addrmap_create_mutable): Likewise. * aix-thread.c (sync_threadlists): Likewise. * alpha-tdep.c (alpha_push_dummy_call): Likewise. (alpha_gdbarch_init): Likewise. * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise. * arm-linux-nat.c (arm_linux_add_process): Likewise. * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise. * arm-tdep.c (push_stack_item): Likewise. (arm_displaced_step_copy_insn): Likewise. (arm_gdbarch_init): Likewise. (_initialize_arm_tdep): Likewise. * avr-tdep.c (push_stack_item): Likewise. * ax-general.c (new_agent_expr): Likewise. * block.c (block_initialize_namespace): Likewise. * breakpoint.c (alloc_counted_command_line): Likewise. (update_dprintf_command_list): Likewise. (parse_breakpoint_sals): Likewise. (decode_static_tracepoint_spec): Likewise. (until_break_command): Likewise. (clear_command): Likewise. (update_global_location_list): Likewise. (get_breakpoint_objfile_data) Likewise. * btrace.c (ftrace_new_function): Likewise. (btrace_set_insn_history): Likewise. (btrace_set_call_history): Likewise. * buildsym.c (add_symbol_to_list): Likewise. (record_pending_block): Likewise. (start_subfile): Likewise. (start_buildsym_compunit): Likewise. (push_subfile): Likewise. (end_symtab_get_static_block): Likewise. (buildsym_init): Likewise. * cli/cli-cmds.c (source_command): Likewise. * cli/cli-decode.c (add_cmd): Likewise. * cli/cli-script.c (build_command_line): Likewise. (setup_user_args): Likewise. (realloc_body_list): Likewise. (process_next_line): Likewise. (copy_command_lines): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (read_pe_exported_syms): Likewise. * coffread.c (coff_locate_sections): Likewise. (coff_symtab_read): Likewise. (coff_read_struct_type): Likewise. * common/cleanups.c (make_my_cleanup2): Likewise. * common/common-exceptions.c (throw_it): Likewise. * common/filestuff.c (make_cleanup_close): Likewise. * common/format.c (parse_format_string): Likewise. * common/queue.h (DEFINE_QUEUE_P): Likewise. * compile/compile-object-load.c (munmap_list_add): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (append_args): Likewise. * corefile.c (specify_exec_file_hook): Likewise. * cp-support.c (make_symbol_overload_list): Likewise. * cris-tdep.c (push_stack_item): Likewise. (cris_gdbarch_init): Likewise. * ctf.c (ctf_trace_file_writer_new): Likewise. * dbxread.c (init_header_files): Likewise. (add_new_header_file): Likewise. (init_bincl_list): Likewise. (dbx_end_psymtab): Likewise. (start_psymtab): Likewise. (dbx_end_psymtab): Likewise. * dcache.c (dcache_init): Likewise. * dictionary.c (dict_create_hashed): Likewise. (dict_create_hashed_expandable): Likewise. (dict_create_linear): Likewise. (dict_create_linear_expandable): Likewise. * dtrace-probe.c (dtrace_process_dof_probe): Likewise. * dummy-frame.c (register_dummy_frame_dtor): Likewise. * dwarf2-frame-tailcall.c (cache_new_ref1): Likewise. * dwarf2-frame.c (dwarf2_build_frame_info): Likewise. (decode_frame_entry_1): Likewise. * dwarf2expr.c (new_dwarf_expr_context): Likewise. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise. * dwarf2read.c (dwarf2_has_info): Likewise. (create_signatured_type_table_from_index): Likewise. (dwarf2_read_index): Likewise. (dw2_get_file_names_reader): Likewise. (create_all_type_units): Likewise. (read_cutu_die_from_dwo): Likewise. (init_tu_and_read_dwo_dies): Likewise. (init_cutu_and_read_dies): Likewise. (create_all_comp_units): Likewise. (queue_comp_unit): Likewise. (inherit_abstract_dies): Likewise. (read_call_site_scope): Likewise. (dwarf2_add_field): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (attr_to_dynamic_prop): Likewise. (abbrev_table_alloc_abbrev): Likewise. (abbrev_table_read_table): Likewise. (add_include_dir): Likewise. (add_file_name): Likewise. (dwarf_decode_line_header): Likewise. (dwarf2_const_value_attr): Likewise. (dwarf_alloc_block): Likewise. (parse_macro_definition): Likewise. (set_die_type): Likewise. (write_psymtabs_to_index): Likewise. (create_cus_from_index): Likewise. (dwarf2_create_include_psymtab): Likewise. (process_psymtab_comp_unit_reader): Likewise. (build_type_psymtab_dependencies): Likewise. (read_comp_units_from_section): Likewise. (compute_compunit_symtab_includes): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (load_partial_dies): Likewise. (dwarf2_symbol_mark_computed): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_read_minimal_symbols): Likewise. * environ.c (make_environ): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * event-loop.c (create_file_handler): Likewise. (create_async_signal_handler): Likewise. (create_async_event_handler): Likewise. (create_timer): Likewise. * exec.c (build_section_table): Likewise. * fbsd-nat.c (fbsd_remember_child): Likewise. * fork-child.c (fork_inferior): Likewise. * frv-tdep.c (new_variant): Likewise. * gdbarch.sh (gdbarch_alloc): Likewise. (append_name): Likewise. * gdbtypes.c (rank_function): Likewise. (copy_type_recursive): Likewise. (add_dyn_prop): Likewise. * gnu-nat.c (make_proc): Likewise. (make_inf): Likewise. (gnu_write_inferior): Likewise. * gnu-v3-abi.c (build_gdb_vtable_type): Likewise. (build_std_type_info_type): Likewise. * guile/scm-param.c (compute_enum_list): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * guile/scm-value.c (gdbscm_value_call): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise. (read_unwind_info): Likewise. * ia64-tdep.c (ia64_gdbarch_init): Likewise. * infcall.c (dummy_frame_context_saver_setup): Likewise. (call_function_by_hand_dummy): Likewise. * infcmd.c (step_once): Likewise. (finish_forward): Likewise. (attach_command): Likewise. (notice_new_inferior): Likewise. * inferior.c (add_inferior_silent): Likewise. * infrun.c (add_displaced_stepping_state): Likewise. (save_infcall_control_state): Likewise. (save_inferior_ptid): Likewise. (_initialize_infrun): Likewise. * jit.c (bfd_open_from_target_memory): Likewise. (jit_gdbarch_data_init): Likewise. * language.c (add_language): Likewise. * linespec.c (decode_line_2): Likewise. * linux-nat.c (add_to_pid_list): Likewise. (add_initial_lwp): Likewise. * linux-thread-db.c (add_thread_db_info): Likewise. (record_thread): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_analyze_prologue): Likewise. * macrocmd.c (macro_define_command): Likewise. * macroexp.c (gather_arguments): Likewise. * macroscope.c (sal_macro_scope): Likewise. * macrotab.c (new_macro_table): Likewise. * mdebugread.c (push_parse_stack): Likewise. (parse_partial_symbols): Likewise. (parse_symbol): Likewise. (psymtab_to_symtab_1): Likewise. (new_block): Likewise. (new_psymtab): Likewise. (mdebug_build_psymtabs): Likewise. (add_pending): Likewise. (elfmdebug_build_psymtabs): Likewise. * mep-tdep.c (mep_gdbarch_init): Likewise. * mi/mi-main.c (mi_execute_command): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (terminate_minimal_symbol_table): Likewise. * mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise. * nat/linux-btrace.c (linux_enable_bts): Likewise. (linux_enable_pt): Likewise. * nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise. (linux_xfer_osdata_processgroups): Likewise. * nios2-tdep.c (nios2_gdbarch_init): Likewise. * nto-procfs.c (procfs_meminfo): Likewise. * objc-lang.c (start_msglist): Likewise. (selectors_info): Likewise. (classes_info): Likewise. (find_methods): Likewise. * objfiles.c (allocate_objfile): Likewise. (update_section_map): Likewise. * osabi.c (gdbarch_register_osabi): Likewise. (gdbarch_register_osabi_sniffer): Likewise. * parse.c (start_arglist): Likewise. * ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise. (hwdebug_insert_point): Likewise. * printcmd.c (display_command): Likewise. (ui_printf): Likewise. * procfs.c (create_procinfo): Likewise. (load_syscalls): Likewise. (proc_get_LDT_entry): Likewise. (proc_update_threads): Likewise. * prologue-value.c (make_pv_area): Likewise. (pv_area_store): Likewise. * psymtab.c (extend_psymbol_list): Likewise. (init_psymbol_list): Likewise. (allocate_psymtab): Likewise. * python/py-inferior.c (add_thread_object): Likewise. * python/py-param.c (compute_enum_values): Likewise. * python/py-value.c (valpy_call): Likewise. * python/py-varobj.c (py_varobj_iter_next): Likewise. * python/python.c (ensure_python_env): Likewise. * record-btrace.c (record_btrace_start_replaying): Likewise. * record-full.c (record_full_reg_alloc): Likewise. (record_full_mem_alloc): Likewise. (record_full_end_alloc): Likewise. (record_full_core_xfer_partial): Likewise. * regcache.c (get_thread_arch_aspace_regcache): Likewise. * remote-fileio.c (remote_fileio_init_fd_map): Likewise. * remote-notif.c (remote_notif_state_allocate): Likewise. * remote.c (demand_private_info): Likewise. (remote_notif_stop_alloc_reply): Likewise. (remote_enable_btrace): Likewise. * reverse.c (save_bookmark_command): Likewise. * rl78-tdep.c (rl78_gdbarch_init): Likewise. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-nat.c (s390_insert_watchpoint): Likewise. * ser-go32.c (dos_get_tty_state): Likewise. (dos_copy_tty_state): Likewise. * ser-mingw.c (ser_windows_open): Likewise. (ser_console_wait_handle): Likewise. (ser_console_get_tty_state): Likewise. (make_pipe_state): Likewise. (net_windows_open): Likewise. * ser-unix.c (hardwire_get_tty_state): Likewise. (hardwire_copy_tty_state): Likewise. * solib-aix.c (solib_aix_new_lm_info): Likewise. * solib-dsbt.c (dsbt_current_sos): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (frv_current_sos): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_bfd_fopen): Likewise. * solib-svr4.c (lm_info_read): Likewise. (svr4_copy_library_list): Likewise. (svr4_default_sos): Likewise. * source.c (find_source_lines): Likewise. (line_info): Likewise. (add_substitute_path_rule): Likewise. * spu-linux-nat.c (spu_bfd_open): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stabsread.c (dbx_lookup_type): Likewise. (read_type): Likewise. (read_member_functions): Likewise. (read_struct_fields): Likewise. (read_baseclasses): Likewise. (read_args): Likewise. (_initialize_stabsread): Likewise. * stack.c (func_command): Likewise. * stap-probe.c (handle_stap_probe): Likewise. * symfile.c (addrs_section_sort): Likewise. (addr_info_make_relative): Likewise. (load_section_callback): Likewise. (add_symbol_file_command): Likewise. (init_filename_language_table): Likewise. * symtab.c (create_filename_seen_cache): Likewise. (sort_search_symbols_remove_dups): Likewise. (search_symbols): Likewise. * target.c (make_cleanup_restore_target_terminal): Likewise. * thread.c (new_thread): Likewise. (enable_thread_stack_temporaries): Likewise. (make_cleanup_restore_current_thread): Likewise. (thread_apply_all_command): Likewise. * tic6x-tdep.c (tic6x_gdbarch_init): Likewise. * top.c (gdb_readline_wrapper): Likewise. * tracefile-tfile.c (tfile_trace_file_writer_new): Likewise. * tracepoint.c (trace_find_line_command): Likewise. (all_tracepoint_actions_and_cleanup): Likewise. (make_cleanup_restore_current_traceframe): Likewise. (get_uploaded_tp): Likewise. (get_uploaded_tsv): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_alloc_content): Likewise. (tui_add_content_elements): Likewise. * tui/tui-disasm.c (tui_find_disassembly_address): Likewise. (tui_set_disassem_content): Likewise. * ui-file.c (ui_file_new): Likewise. (stdio_file_new): Likewise. (tee_file_new): Likewise. * utils.c (make_cleanup_restore_integer): Likewise. (add_internal_problem_command): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * valops.c (find_oload_champ): Likewise. * value.c (allocate_value_lazy): Likewise. (record_latest_value): Likewise. (create_internalvar): Likewise. * varobj.c (install_variable): Likewise. (new_variable): Likewise. (new_root_variable): Likewise. (cppush): Likewise. (_initialize_varobj): Likewise. * windows-nat.c (windows_make_so): Likewise. * x86-nat.c (x86_add_process): Likewise. * xcoffread.c (arrange_linetable): Likewise. (allocate_include_entry): Likewise. (process_linenos): Likewise. (SYMBOL_DUP): Likewise. (xcoff_start_psymtab): Likewise. (xcoff_end_psymtab): Likewise. * xml-support.c (gdb_xml_parse_attr_ulongest): Likewise. * xtensa-tdep.c (xtensa_register_type): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Likewise. (compile_bytecodes): Likewise. * dll.c (loaded_dll): Likewise. * event-loop.c (append_callback_event): Likewise. (create_file_handler): Likewise. (create_file_event): Likewise. * hostio.c (handle_open): Likewise. * inferiors.c (add_thread): Likewise. (add_process): Likewise. * linux-aarch64-low.c (aarch64_linux_new_process): Likewise. * linux-arm-low.c (arm_new_process): Likewise. (arm_new_thread): Likewise. * linux-low.c (add_to_pid_list): Likewise. (linux_add_process): Likewise. (handle_extended_wait): Likewise. (add_lwp): Likewise. (enqueue_one_deferred_signal): Likewise. (enqueue_pending_signal): Likewise. (linux_resume_one_lwp_throw): Likewise. (linux_resume_one_thread): Likewise. (linux_read_memory): Likewise. (linux_write_memory): Likewise. * linux-mips-low.c (mips_linux_new_process): Likewise. (mips_linux_new_thread): Likewise. (mips_add_watchpoint): Likewise. * linux-x86-low.c (initialize_low_arch): Likewise. * lynx-low.c (lynx_add_process): Likewise. * mem-break.c (set_raw_breakpoint_at): Likewise. (set_breakpoint): Likewise. (add_condition_to_breakpoint): Likewise. (add_commands_to_breakpoint): Likewise. (clone_agent_expr): Likewise. (clone_one_breakpoint): Likewise. * regcache.c (new_register_cache): Likewise. * remote-utils.c (look_up_one_symbol): Likewise. * server.c (queue_stop_reply): Likewise. (start_inferior): Likewise. (queue_stop_reply_callback): Likewise. (handle_target_event): Likewise. * spu-low.c (fetch_ppc_memory): Likewise. (store_ppc_memory): Likewise. * target.c (set_target_ops): Likewise. * thread-db.c (thread_db_load_search): Likewise. (try_thread_db_load_1): Likewise. * tracepoint.c (add_tracepoint): Likewise. (add_tracepoint_action): Likewise. (create_trace_state_variable): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtro): Likewise. (add_while_stepping_state): Likewise. * win32-low.c (child_add_thread): Likewise. (get_image_name): Likewise.
2015-08-25Move aarch64_linux_new_thread to nat/aarch64-linux.cYao Qi1-13/+0
This patch moves aarch64_linux_new_thread in GDB and GDBserver to nat/aarch64-linux.c. gdb: 2015-08-25 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_new_thread): Move it to ... * nat/aarch64-linux.c (aarch64_linux_new_thread): ... here. * nat/aarch64-linux.h (aarch64_linux_new_thread): Declare. gdb/gdbserver: 2015-08-25 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (aarch64_linux_new_thread): Remove.
2015-08-25Move aarch64_linux_prepare_to_resume to nat/aarch64-linux.cYao Qi1-42/+2
gdb: 2015-08-25 Yao Qi <yao.qi@linaro.org> * Makefile.in (aarch64-liunx.o): New rule. (HFILES_NO_SRCDIR): Add aarch64-linux.h. * config/aarch64/linux.mh (NAT_FILE): Add aarch64-linux.o. * aarch64-linux-nat.c: Include nat/aarch64-linux.h. * aarch64-linux-nat.c (aarch64_get_debug_reg_state): Make it extern. (aarch64_linux_prepare_to_resume): Move it nat/aarch64-linux.c. * nat/aarch64-linux-hw-point.h (aarch64_debug_reg_state): Declare * nat/aarch64-linux.c: New file. * nat/aarch64-linux.h: New file. gdb/gdbserver: 2015-08-25 Yao Qi <yao.qi@linaro.org> * Makefile.in (aarch64-linux.o): New rule. * configure.srv (aarch64*-*-linux*): Append aarch64-linux.o to srv_tgtobj. * linux-aarch64-low.c: Include nat/aarch64-linux.h. (aarch64_init_debug_reg_state): Make it extern. (aarch64_linux_prepare_to_resume): Remove.
2015-08-25Make aarch64_linux_prepare_to_resume the same on GDB and GDBserverYao Qi1-3/+4
gdb: 2015-08-25 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_prepare_to_resume): Use lwp_arch_private_info and ptid_of_lwp. gdb/gdbserver: 2015-08-25 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (aarch64_linux_prepare_to_resume): Use lwp_arch_private_info and ptid_of_lwp.
2015-08-25Move debug_reg_change_callback and aarch64_notify_debug_reg_change to ↵Yao Qi1-85/+0
nat/aarch64-linux-hw-point.c gdb: 2015-08-25 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (struct arch64_dr_update_callback_param): Move it to nat/aarch64-linux-hw-point.c. (debug_reg_change_callback): Likewise. (aarch64_notify_debug_reg_change): :Likewise. * nat/aarch64-linux-hw-point.c: Include nat/linux-nat.h. (aarch64_dr_update_callback_param): New. (debug_reg_change_callback): New function. (aarch64_notify_debug_reg_change): Likewise. * nat/aarch64-linux-hw-point.h (aarch64_notify_debug_reg_change): Remove the declaration. gdb/gdbserver: 2015-08-25 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (struct arch64_dr_update_callback_param): Remove. (debug_reg_change_callback): Remove. (aarch64_notify_debug_reg_change): Remove.
2015-08-25Make debug_reg_change_callback the same on GDB and GDBserverYao Qi1-1/+1
This patch makes function debug_reg_change_callback in GDB and GDBserver look the same, so that the following patch can move them to nat/aarch64-linux-hw-point.c. gdb: 2015-08-25 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (debug_reg_change_callback): Use ptid_of_lwp to get ptid of lwp. gdb/gdbserver: 2015-08-25 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (debug_reg_change_callback): Use ptid_of_lwp to get ptid of lwp.
2015-08-25Make aarch64_notify_debug_reg_change the same on GDB and GDBserverYao Qi1-1/+1
gdb: 2015-08-25 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_notify_debug_reg_change): Call current_lwp_ptid. gdb/gdbserver: 2015-08-25 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (aarch64_notify_debug_reg_change): Call current_lwp_ptid.
2015-08-25Use debug_printf in debug_reg_change_callbackYao Qi1-12/+9
gdb: 2015-08-25 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (debug_reg_change_callback): Use debug_printf. gdb/gdbserver: 2015-08-25 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (debug_reg_change_callback): Use debug_printf.
2015-08-25Get pid rather than lwpidYao Qi1-1/+1
We print PID rather than LWPID in the debug output, so we need call ptid_get_pid in debug_reg_change_callback. gdb: 2015-08-25 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (debug_reg_change_callback): Call ptid_get_pid rather than ptid_get_lwp.
2015-08-05Remove get_thread_idYao Qi1-21/+5
This patch removes get_thread_id from aarch64-linux-nat.c, arm-linux-nat.c and xtensa-linux-nat.c. get_thread_id was added in this commit below in 2000, 41c49b06c471443d3baf2eaa2463a315f9b5edca https://sourceware.org/ml/gdb-patches/2000-04/msg00398.html which predates the ptid_t stuff added into GDB. Nowadays, lwpid of inferior_ptid is only zero when the inferior is created (in fork-child.c:fork_inferior) and its lwpid will be set after linux_nat_wait_1 gets the first event. After that, lwpid of inferior_ptid is not zero for linux-nat target, then we can use ptid_get_lwp, so this function isn't needed anymore. Even when GDB attaches to a process, the lwp of inferior_ptid isn't zero, see linux-nat.c:linux_nat_attach, /* The ptrace base target adds the main thread with (pid,0,0) format. Decorate it with lwp info. */ ptid = ptid_build (ptid_get_pid (inferior_ptid), ptid_get_pid (inferior_ptid), 0); Note that linux_nat_xfer_partial shifts lwpid to pid for inferior_ptid temperately for calling linux_ops->to_xfer_partial, but all the affected functions in this patch are not called in linux_ops->to_xfer_partial. I think we can safely remove get_thread_id for all linux native targets. Regression tested on arm-linux and aarch64-linux. Unable to build native GDB and test it on xtensa-linux. gdb: 2015-08-05 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (get_thread_id): Remove. (debug_reg_change_callback): Call ptid_get_lwp instead of get_thread_id. (fetch_gregs_from_thread): Likewise. (store_gregs_to_thread): Likewise. (fetch_fpregs_from_thread): Likewise. (store_fpregs_to_thread): Likewise. (aarch64_linux_get_debug_reg_capacity): Likewise. * arm-linux-nat.c (get_thread_id): Remove. (GET_THREAD_ID): Update macro to use ptid_get_lwp. * xtensa-linux-nat.c (get_thread_id): Remove. (GET_THREAD_ID): Update macro to use ptid_get_lwp. * arm-linux-nat.c (get_thread_id): Remove. (GET_THREAD_ID): Remove. (fetch_fpregs): Call ptid_get_lwp instead of GET_THREAD_ID. (store_fpregs, fetch_regs, store_regs): Likewise. (fetch_wmmx_regs, store_wmmx_regs): Likewise. (fetch_vfp_regs, store_vfp_regs): Likewise. (arm_linux_read_description): Likewise. (arm_linux_get_hwbp_cap): Likewise. * xtensa-linux-nat.c (get_thread_id): Remove. (GET_THREAD_ID): Remove. (fetch_gregs, store_gregs): Call ptid_get_lwp instead of GET_THREAD_ID.
2015-07-31Mostly trivial enum fixesSimon Marchi1-3/+6
This is a patch I extracted from Pedro's C++ branch. It contains the most trivial enum fixes, where an integer type/value was used instead of the appropriate enum type/value. It fixes many C++ errors, since in C++ you can't mix integers and enums implicitely. Regardless of the C++ conversion, I think this is a good cleanup to make use of the appropriate enum types. Regression-tested on native x86_64. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum type or value instead of integer. (aarch64_linux_insert_watchpoint): Likewise. (aarch64_linux_remove_watchpoint): Likewise. * ada-lang.c (ada_op_print_tab): Likewise. * amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise. (amd64_linux_syscall_record_common): Likewise. * arch-utils.c (target_byte_order_user): Likewise. (default_byte_order): Likewise. * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise. (arm_linux_get_hwbp_type): Likewise. (arm_linux_hw_watchpoint_initialize): Likewise. (arm_linux_insert_watchpoint): Likewise. * arm-linux-tdep.c (arm_canonicalize_syscall): Likewise. (arm_linux_syscall_record): Likewise. * breakpoint.c (update_watchpoint): Likewise. (breakpoint_here_p): Likewise. (bpstat_print): Likewise. (enable_breakpoint_disp): Likewise. * c-lang.c (c_op_print_tab): Likewise. * cli/cli-decode.c (add_info_alias): Likewise. * d-lang.c (d_op_print_tab): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * f-exp.y (dot_ops): Likewise. (f77_keywords): Likewise. * f-lang.c (f_op_print_tab): Likewise. * go-lang.c (go_op_print_tab): Likewise. * guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise. * guile/scm-cmd.c (gdbscm_make_command): Likewise. * guile/scm-param.c (gdbscm_make_parameter): Likewise. * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise. * guile/scm-string.c (struct scm_to_stringn_data): Likewise. (struct scm_from_stringn_data): Likewise. * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise. * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise. (ia64_linux_remove_watchpoint): Likewise. (ia64_linux_can_use_hw_breakpoint): Likewise. * infrun.c (print_stop_event): Likewise. * jv-lang.c (java_op_print_tab): Likewise. * linux-nat.c (linux_proc_xfer_partial): Likewise. * linux-nat.h (struct lwp_info): Likewise. * linux-thread-db.c (enable_thread_event): Likewise. * m2-lang.c (m2_op_print_tab): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise. (mi_cmd_stack_list_variables): Likewise. * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise. * mi/mi-out.c (mi_table_begin): Likewise. (mi_table_header): Likewise. * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise. (mips_linux_insert_watchpoint): Likewise. (mips_linux_remove_watchpoint): Likewise. * nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise. * nat/mips-linux-watch.h (struct mips_watchpoint): Likewise. (mips_linux_watch_type_to_irw): Likewise. * nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise. (procfs_insert_hw_watchpoint): Likewise. (procfs_remove_hw_watchpoint): Likewise. (procfs_hw_watchpoint): Likewise. (procfs_can_use_hw_breakpoint): Likewise. (procfs_remove_hw_watchpoint): Likewise. (procfs_insert_hw_watchpoint): Likewise. * p-lang.c (pascal_op_print_tab): Likewise. * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise. * ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise. * procfs.c (procfs_can_use_hw_breakpoint): Likewise. (procfs_insert_watchpoint): Likewise. (procfs_remove_watchpoint): Likewise. * psymtab.c (recursively_search_psymtabs): Likewise. * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise. (m32r_insert_watchpoint): Likewise. * remote-mips.c (mips_can_use_watchpoint): Likewise. (mips_insert_watchpoint): Likewise. (mips_remove_watchpoint): Likewise. * remote.c (watchpoint_to_Z_packet): Likewise. (remote_insert_watchpoint): Likewise. (remote_remove_watchpoint): Likewise. (remote_check_watch_resources): Likewise. * s390-linux-nat.c (s390_insert_watchpoint): Likewise. (s390_remove_watchpoint): Likewise. (s390_can_use_hw_breakpoint): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise. * target.h (struct target_ops): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue): Likewise. * ui-out.c (struct ui_out_hdr): Likewise. (append_header_to_list): Likewise. (get_next_header): Likewise. (verify_field): Likewise. (ui_out_begin): Likewise. (ui_out_field_int): Likewise. (ui_out_field_fmt_int): Likewise. (ui_out_field_skip): Likewise. (ui_out_field_string): Likewise. (ui_out_field_fmt): Likewise. * varobj.c (new_variable): Likewise. * x86-nat.c (x86_insert_watchpoint): Likewise. (x86_remove_watchpoint): Likewise. (x86_can_use_hw_breakpoint): Likewise. * xtensa-tdep.h (struct gdbarch_tdep): Likewise. * inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to previously anonymous enumeration type.. * linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall value. * target-debug.h (target_debug_print_enum_target_hw_bp_type): New. (target_debug_print_enum_bptype): New. * target-delegates.c: Regenerate.
2015-07-24Linux: sys/ptrace.h -> nat/gdb_ptrace.h everywherePedro Alves1-1/+1
So that we pick the enum __ptrace_request fix everywhere. gdb/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * aarch64-linux-nat.c: Include nat/gdb_ptrace.h instead of sys/ptrace.h. * alpha-linux-nat.c: Likewise. * amd64-linux-nat.c: Likewise. * arm-linux-nat.c: Likewise. * hppa-linux-nat.c: Likewise. * i386-linux-nat.c: Likewise. * ia64-linux-nat.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * m32r-linux-nat.c: Likewise. * m68klinux-nat.c: Likewise. * mips-linux-nat.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-ptrace.h * nat/mips-linux-watch.c: Likewise. * nat/x86-linux-dregs.c: Likewise. * ppc-linux-nat.c: Likewise. * s390-linux-nat.c: Likewise. * spu-linux-nat.c: Likewise. * tilegx-linux-nat.c: Likewise. * x86-linux-nat.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.c: Likewise.om> * linux-aarch64-low.c: Include nat/gdb_ptrace.h instead of sys/ptrace.h. * linux-arm-low.c: Likewise. * linux-cris-low.c: Likewise. * linux-crisv32-low.c: Likewise. * linux-low.c: Likewise. * linux-m68k-low.c: Likewise. * linux-mips-low.c: Likewise. * linux-nios2-low.c: Likewise. * linux-s390-low.c: Likewise. * linux-sparc-low.c: Likewise. * linux-tic6x-low.c: Likewise. * linux-tile-low.c: Likewise. * linux-x86-low.c: Likewise.
2015-07-23Return zero in aarch64_linux_can_use_hw_breakpoint if target doesn't support ↵Yao Qi1-8/+21
HW watchpoint/breakpoint Nowadays aarch64_linux_can_use_hw_breakpoint always return one, but it can be smarter, say, if GDB knows target doesn't support HW watchpoint or breakpoint because HW watchpoint/breakpoint is disabled in linux kernel, for example, it can safely return zero. gdb: 2015-07-23 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): If TYPE is watchpoint, return zero if aarch64_num_wp_regs is zero. If TYPE is breakpoint, return zero if arch64_num_bp_regs is zero.
2015-07-21Move aarch64_linux_get_debug_reg_capacity to nat/aarch64-linux-hw-point.cYao Qi1-56/+1
There are also some duplication on getting HW watchpoint/breakpoint registers info between GDB and GDBserver. This patch moves them to nat/aarch64-linux-hw-point.c. Note that ENABLE_NLS is not defined in GDBserver, so it should be OK to use _( markup. gdb: 2015-07-21 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Move it to nat/aarch64-linux-hw-point.c. (aarch64_linux_child_post_startup_inferior): Update. * nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity): New function. * nat/aarch64-linux-hw-point.h (aarch64_linux_get_debug_reg_capacity): Declare it. gdb/gdbserver: 2015-07-21 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (aarch64_arch_setup): Remove code and call aarch64_linux_get_debug_reg_capacity.
2015-07-17Move common aarch64 HW breakpoint/watchpoint code to nat/Yao Qi1-598/+2
When I look at test fails related to watchpoint on aarch64-linux, I find there are some code duplicates between GDB and GDBserver. This patch is to move some of them to a nat/aarch64-linux-hw-point.{h,c}. The only change I do is about the dr_changed_t typedef, which was ULONGEST in GDB and 'unsigned long long' in GDBserver. Each bit of dr_changed_t represents a status of each HW breakpoint or watchpoint register, and the max number of HW breakpoint or watchpoint registers is 16, so the width of 'unsigned long long' is sufficient. gdb: 2015-07-17 Yao Qi <yao.qi@linaro.org> * Makefile.in (HFILES_NO_SRCDIR): Add nat/aarch64-linux-hw-point.h. (aarch64-linux-hw-point.o): New rule. * nat/aarch64-linux-hw-point.h: New file. * nat/aarch64-linux-hw-point.c: New file. * aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h. (AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h. (AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise. (AARCH64_HWP_ALIGNMENT): Likewise. (AARCH64_HWP_MAX_LEN_PER_REG): Likewise. (AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise. (AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise. (DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise. (DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise. (aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise. (struct aarch64_debug_reg_state): Likewise. (struct arch_lwp_info): Likewise. (aarch64_linux_set_debug_regs): Likewise. (aarch64_notify_debug_reg_change): Remove static. (aarch64_align_watchpoint): Likewise. (DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise. (aarch64_watchpoint_length): Likewise. (aarch64_point_encode_ctrl_reg): Likewise (aarch64_point_is_aligned): Likewise. (aarch64_dr_state_insert_one_point): Likewise. (aarch64_dr_state_remove_one_point): Likewise. (aarch64_handle_breakpoint): Likewise. (aarch64_handle_aligned_watchpoint): Likewise. (aarch64_handle_unaligned_watchpoint): Likewise. (aarch64_handle_watchpoint): Likewise. * config/aarch64/linux.mh (NAT_FILE): Add aarch64-linux-hw-point.o. gdb/gdbserver: 2015-07-17 Yao Qi <yao.qi@linaro.org> * Makefile.in (aarch64-linux-hw-point.o): New rule. * configure.srv (srv_tgtobj): Append aarch64-linux-hw-point.o. * linux-aarch64-low.c: Include nat/aarch64-linux-hw-point.h. (AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h. (AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise. (AARCH64_HWP_ALIGNMENT): Likewise. (AARCH64_HWP_MAX_LEN_PER_REG): Likewise. (AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise. (aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise. (AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise. (DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise. (DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise. (struct aarch64_debug_reg_state): Likewise. (struct arch_lwp_info): Likewise. (aarch64_align_watchpoint): Likewise. (DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise. (aarch64_watchpoint_length): Likewise. (aarch64_point_encode_ctrl_reg): Likewise (aarch64_point_is_aligned): Likewise. (aarch64_align_watchpoint): Likewise. (aarch64_linux_set_debug_regs): (aarch64_dr_state_insert_one_point): Likewise. (aarch64_dr_state_remove_one_point): Likewise. (aarch64_handle_breakpoint): Likewise. (aarch64_handle_aligned_watchpoint): Likewise. (aarch64_handle_unaligned_watchpoint): Likewise. (aarch64_handle_watchpoint): Likewise.
2015-07-17Pass aarch64_debug_reg_state to functionsYao Qi1-32/+24
Some functions on handling HW watchpoint in GDB and GDBserver looks the same except the code getting debug register state from current inferior. In GDB, we get debug register state like this: state = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid)); while in GDBserver, we get debug register state like this: state = aarch64_get_debug_reg_state (); This patch is to move two lines above out of some functions, and pass aarch64_debug_reg_state to these functions, in this way, these functions are the same, and can be moved to a common place. gdb: 2015-07-17 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_handle_breakpoint): Add argument state and don't call aarch64_get_debug_reg_state. All callers update. (aarch64_linux_insert_hw_breakpoint): Call aarch64_get_debug_reg_state earlier. (aarch64_linux_remove_hw_breakpoint): Likewise. (aarch64_handle_aligned_watchpoint): Add argument state and don't call aarch64_get_debug_reg_state. All callers update. (aarch64_handle_unaligned_watchpoint): Likewise. (aarch64_handle_watchpoint): Add argument state. (aarch64_linux_insert_watchpoint): Call aarch64_get_debug_reg_state earlier. (aarch64_linux_remove_watchpoint): Likewise. gdb/gdbserver: 2015-07-17 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (aarch64_handle_breakpoint): Add argument state and don't aarch64_get_debug_reg_state. All callers update. (aarch64_handle_aligned_watchpoint): Likewise. (aarch64_handle_unaligned_watchpoint): Likewise. (aarch64_handle_watchpoint): Likewise. (aarch64_insert_point): Call aarch64_get_debug_reg_state earlier. (aarch64_remove_point): Likewise.
2015-07-17Use debug_printf to print debug messageYao Qi1-21/+19
Some functions in aarch64-linux-nat.c and linux-aarch64-low.c looks the same except for the code printing debug message. In GDB, we use fprintf_unfiltered (gdb_stdlog, ...) while in GDBserver, we use fprintf (stderr, ...). This patch is to change them to use debug_printf so that these functions are the same, and I can move them to a common place in the following patch. gdb: 2015-07-17 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_show_debug_reg_state): Use debug_printf. (aarch64_handle_unaligned_watchpoint): Likewise. gdb/gdbserver: 2015-07-17 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (aarch64_show_debug_reg_state): Use debug_printf. (aarch64_handle_unaligned_watchpoint): Likewise.
2015-07-17int -> enum target_hw_bp_type in aarch64-linux-nat.cYao Qi1-7/+10
This patch is to use 'enum target_hw_bp_type' instead of int for breakpoint type, in order to make some functions in GDB and GDBserver looks similar. gdb: 2015-07-17 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_dr_state_insert_one_point): Change argument type's type to 'enum target_hw_bp_type'. (aarch64_dr_state_remove_one_point): Likewise. (aarch64_handle_breakpoint): Likewise. (aarch64_linux_insert_hw_breakpoint): Likewise. (aarch64_linux_remove_hw_breakpoint): Likewise. (aarch64_handle_aligned_watchpoint): Likewise.
2015-07-17Call ptid_get_pid instead of get_thread_id in ↵Yao Qi1-1/+1
aarch64_linux_get_debug_reg_capacity aarch64_linux_get_debug_reg_capacity is called by aarch64_linux_child_post_startup_inferior, and argument ptid is created in inf-ptrace.c:inf_ptrace_create_inferior, /* On some targets, there must be some explicit actions taken after the inferior has been started up. */ target_post_startup_inferior (pid_to_ptid (pid)); so in aarch64_linux_get_debug_reg_capacity, we can get pid by ptid_get_pid, and don't need to use get_thread_id. gdb: 2015-07-17 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Call ptid_get_pid instead of get_thread_id.
2015-07-09Pass ptid to aarch64_linux_get_debug_reg_capacityYao Qi1-4/+5
This patch is to pass ptid to aarch64_linux_get_debug_reg_capacity, and stop using global variable inferior_ptid. gdb: 2015-07-09 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Add argument ptid. Update comments. Caller update.
2015-07-07Native debug arm program by aarch64 GDBYao Qi1-37/+163
This patch is to let aarch64 GDB debug 32-bit arm program natively. In each function for fetching and storing registers, GDB will check gdbarch_bfd_arch_info (gdbarch)->bits_per_word, if it is 32, call the corresponding aarch32 functions in aarch32-linux-nat.c, otherwise fall back to aarch64 code to fetch and store registers. aarch64_linux_read_description has to return the right target description, but we don't have gdbarch available there, so GDB fetches auxv and gets AT_PHENT, in order to determine whether the target is 32-bit or 64-bit. I learned this trick from solib-svr4.c. gdb: 2015-07-07 Yao Qi <yao.qi@linaro.org> * aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from arm-linux-nat.c. * aarch64-linux-nat.c: Include aarch32-linux-nat.h and elf/external.h. (fetch_gregs_from_thread): Call aarch32_gp_regcache_supply if target is 32-bit. (store_gregs_to_thread): Call aarch32_gp_regcache_collect if target is 32-bit. (fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply if target is 32-bit. (store_fpregs_to_thread): Call aarch32_vfp_regcache_collect if target is 32-bit. (tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (aarch64_linux_read_description): Return the right target description. * arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h. * config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o. * configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and arm-linux-tdep.o
2015-07-02Fix typo in aarch64_linux_insert_hw_breakpointYao Qi1-1/+1
It should be "insert_hw_breakpoint" rather than "insert_hw_watchpoint". gdb: 2015-07-02 Yao Qi <yao.qi@linaro.org> * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix typo in the debugging message.
2015-02-17Fix GDB build fail on Aarch64 when -fno-common is enabledMaxim Ostapenko1-3/+0
Current trunk GDB (and gdb-7.8.1 too) fails to build on Aarch64 when -fno-common is enabled. It fails during link stage due to multiple definition of `tdesc_aarch64': ... [ 199s] aarch64-linux-nat.o: In function `initialize_tdesc_aarch64': [ 199s] /home/abuild/rpmbuild/BUILD/gdb-7.8.1/gdb/features/aarch64.c:11: multiple definition of `tdesc_aarch64' [ 199s] aarch64-tdep.o:/home/abuild/rpmbuild/BUILD/gdb-7.8.1/gdb/objfiles.h:540: first defined here [ 199s] aarch64-linux-nat.o: In function `initialize_tdesc_aarch64': [ 199s] /home/abuild/rpmbuild/BUILD/gdb-7.8.1/gdb/features/aarch64.c:11: multiple definition of `tdesc_aarch64' [ 199s] aarch64-tdep.o:/home/abuild/rpmbuild/BUILD/gdb-7.8.1/gdb/objfiles.h:540: first defined here [ 199s] collect2: error: ld returned 1 exit status [ 199s] make[2]: *** [gdb] Error 1 ... This happens because struct target_desc *tdesc_aarch64 is defined in gdb/features/aarch64.c, which is included by two files (gdb/aarch64-linux-nat.c and gdb/aarch64-tdep.c). gdb/Changelog 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com> PR gdb/17984 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore. (aarch64_linux_read_description): Remove initialize_tdesc_aarch64 call. * aarch64-tdep.h (tdesc_aarch64): Declare.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-10-03Avoid software breakpoint's instruction shadow inconsistencyMaciej W. Rozycki1-2/+2
This change: commit b775012e845380ed4c7421a1b87caf7bfae39f5f Author: Luis Machado <luisgpm@br.ibm.com> Date: Fri Feb 24 15:10:59 2012 +0000 2012-02-24 Luis Machado <lgustavo@codesourcery.com> * remote.c (remote_supports_cond_breakpoints): New forward declaration. [...] changed the way breakpoints are inserted and removed such that `insert_bp_location' can now be called with the breakpoint being handled already in place, while previously the call was only ever made for breakpoints that have not been put in place. This in turn caused an issue for software breakpoints and targets for which a breakpoint's `placed_address' may not be the same as the original requested address. The issue is `insert_bp_location' overwrites the previously adjusted value in `placed_address' with the original address, that is only replaced back with the correct adjusted address later on when `gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window where the value in `placed_address' does not correspond to data stored in `shadow_contents', leading to incorrect instruction bytes being supplied when `one_breakpoint_xfer_memory' is called to supply the instruction overlaid by the breakpoint. And this is exactly what happens on the MIPS target with software breakpoints placed in microMIPS code. In this case not only `placed_address' is not the original address because of the ISA bit, but `mips_breakpoint_from_pc' has to read the original instruction to determine which one of the two software breakpoint instruction encodings to choose as well. The 16-bit encoding is used to replace 16-bit instructions and similarly the 32-bit one is used with 32-bit instructions, to satisfy branch delay slot size requirements. The mismatch between `placed_address' and the address data in `shadow_contents' has been obtained from leads to the wrong encoding being used in some cases, which in the case of a 32-bit software breakpoint instruction replacing a 16-bit instruction causes corruption to the adjacent following instruction and leads the debug session astray if execution reaches there e.g. with a jump. To address this problem I made the change below, that adds a `reqstd_address' field to `struct bp_target_info' and leaves `placed_address' unchanged once it has been set. This ensures data in `shadow_contents' is always consistent with `placed_address'. This approach also has this good side effect that all the places that examine the breakpoint's address see a consistent value, either `reqstd_address' or `placed_address', as required. Currently some places see either the original or the adjusted address in `placed_address', depending on whether they have been called before `gdbarch_remote_breakpoint_from_pc' or afterwards. This is in particular true for subsequent calls to `gdbarch_remote_breakpoint_from_pc' itself, e.g. from `one_breakpoint_xfer_memory'. This is also important for places like `find_single_step_breakpoint' where a breakpoint's address is compared to the raw value of $pc. * breakpoint.h (bp_target_info): Add `reqstd_address' member, update comments. * breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address' for the breakpoint's address. Don't preinitialize `placed_size'. (insert_bp_location): Set `reqstd_address' rather than `placed_address'. (bp_target_info_copy_insertion_state): Also copy `placed_address'. (bkpt_insert_location): Use `reqstd_address' for the breakpoint's address. (bkpt_remove_location): Likewise. (deprecated_insert_raw_breakpoint): Likewise. (deprecated_remove_raw_breakpoint): Likewise. (find_single_step_breakpoint): Likewise. * mem-break.c (default_memory_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. Don't set `placed_address' or `placed_size' if breakpoint contents couldn't have been determined. * remote.c (remote_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. (remote_insert_hw_breakpoint): Likewise. Don't set `placed_address' or `placed_size' if breakpoint couldn't have been set. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use `reqstd_address' for the breakpoint's address. * arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise. * ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise. * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint): Likewise. * nto-procfs.c (procfs_insert_breakpoint): Likewise. (procfs_insert_hw_breakpoint): Likewise. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint): Likewise. * x86-nat.c (x86_insert_hw_breakpoint): Likewise.
2014-09-11Introduce show_debug_regsGary Benson1-17/+13
This commit adds a new global flag show_debug_regs to common-debug.h to replace the flag debug_hw_points used by gdbserver and by the Linux x86 and AArch64 ports, and to replace the flag maint_show_dr used by the Linux MIPS port. Note that some debug printing in the AArch64 port was enabled only if debug_hw_points > 1 but no way to set debug_hw_points to values other than 0 and 1 was provided; that code was effectively dead. This commit enables all debug printing if show_debug_regs is nonzero, so the AArch64 output will be more verbose than previously. gdb/ChangeLog: * common/common-debug.h (show_debug_regs): Declare. * common/common-debug.c (show_debug_regs): Define. * aarch64-linux-nat.c (debug_hw_points): Don't define. Replace all uses with show_debug_regs. Replace all uses that considered debug_hw_points as a multi-value integer with straight boolean uses. * x86-nat.c (debug_hw_points): Don't define. Replace all uses with show_debug_regs. * nat/x86-dregs.c (debug_hw_points): Don't declare. Replace all uses with show_debug_regs. * mips-linux-nat.c (maint_show_dr): Don't define. Replace all uses with show_debug_regs. gdb/gdbserver/ChangeLog: * server.h (debug_hw_points): Don't declare. * server.c (debug_hw_points): Don't define. Replace all uses with show_debug_regs. * linux-aarch64-low.c (debug_hw_points): Don't define. Replace all uses with show_debug_regs.
2014-08-21gdb: Fix aarch64 native build issue caused by use of LONGESTWill Newton1-1/+1
Recent gdb code refactor changes LONGEST from a macro to a typedef, thus the use of it in aarch64-linux-nat.c is no longer valid. 2014-08-21 Bin Cheng <bin.cheng@arm.com> * aarch64-linux-nat.c (dr_changed_t): Change the type from unsigned LONGEST to ULONGEST.
2014-08-07AARCH64 Linux: Fill 'collect_regset' in regset structures.Andreas Arnez1-26/+12
In order to provide 'collect_regset' support, the generic function regcache_collect_regset is exploited. Since this requires writing appropriate register maps, these can be used for supply_regset as well.
2014-05-22Include asm/ptrace.h in aarch64-linux-nat.cRamana Radhakrishnan1-0/+1
A recent change to glibc removed asm/ptrace.h from user.h for AArch64. This meant that cross-native builds of gdb using trunk glibc broke because aarch64-linux-nat.c because user_hwdebug_state couldn't be found. Fixed by including asm/ptrace.h like other ports. 2014-05-22 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com> * aarch64-linux-nat.c (asm/ptrace.h): Include.
2014-02-19Add target_ops argument to to_post_startup_inferiorTom Tromey1-3/+5
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_post_startup_inferior>: Add argument. (target_post_startup_inferior): Add argument. * target.c (debug_to_post_startup_inferior): Add argument. (update_current_target): Update. * spu-linux-nat.c (spu_child_post_startup_inferior): Add 'self' argument. * linux-nat.c (linux_child_post_startup_inferior): Add 'self' argument. * inf-ptrace.c (inf_ptrace_post_startup_inferior): Add 'self' argument. * inf-child.c (inf_child_post_startup_inferior): Add 'self' argument. * i386-linux-nat.c (i386_linux_child_post_startup_inferior): Add 'self' argument. (super_post_startup_inferior): Likewise. * amd64-linux-nat.c (amd64_linux_child_post_startup_inferior): Add 'self' argument. (super_post_startup_inferior): Likewise. * aarch64-linux-nat.c (aarch64_linux_child_post_startup_inferior): Add 'self' argument. (super_post_startup_inferior): Likewise.
2014-02-19Add target_ops argument to to_region_ok_for_hw_watchpointTom Tromey1-1/+2
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>: Add argument. (target_region_ok_for_hw_watchpoint): Add argument. * target.c (debug_to_region_ok_for_hw_watchpoint): Add argument. (default_region_ok_for_hw_watchpoint): Add argument. * spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Add argument. * s390-linux-nat.c (s390_region_ok_for_hw_watchpoint): Add 'self' argument. * remote.c (remote_region_ok_for_hw_watchpoint): Add 'self' argument. * procfs.c (procfs_region_ok_for_hw_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): Add 'self' argument. * i386-nat.c (i386_region_ok_for_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_region_ok_for_hw_watchpoint): Add 'self' argument.
2014-02-19Add target_ops argument to to_insert_watchpointTom Tromey1-1/+2
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_insert_watchpoint>: Add argument. (target_insert_watchpoint): Add argument. * target.c (debug_to_insert_watchpoint): Add argument. (update_current_target): Update. * s390-linux-nat.c (s390_insert_watchpoint): Add 'self' argument. * remote.c (remote_insert_watchpoint): Add 'self' argument. * remote-mips.c (mips_insert_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_insert_watchpoint): Add 'self' argument. * procfs.c (procfs_insert_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Add 'self' argument. * nto-procfs.c (procfs_insert_hw_watchpoint): Add 'self' argument. (procfs_insert_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_insert_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_insert_watchpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Add 'self' argument. * i386-nat.c (i386_insert_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_insert_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_insert_watchpoint): Add 'self' argument.
2014-02-19Add target_ops argument to to_remove_watchpointTom Tromey1-1/+2
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_remove_watchpoint>: Add argument. (target_remove_watchpoint): Add argument. * target.c (debug_to_remove_watchpoint): Add argument. (update_current_target): Update. * s390-linux-nat.c (s390_remove_watchpoint): Add 'self' argument. * remote.c (remote_remove_watchpoint): Add 'self' argument. * remote-mips.c (mips_remove_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_remove_watchpoint): Add 'self' argument. * procfs.c (procfs_remove_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_remove_watchpoint): Add 'self' argument. * nto-procfs.c (procfs_remove_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_remove_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_remove_watchpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_remove_watchpoint): Add 'self' argument. * i386-nat.c (i386_remove_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_remove_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_remove_watchpoint): Add 'self' argument.
2014-02-19Add target_ops argument to to_remove_hw_breakpointTom Tromey1-1/+2
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_remove_hw_breakpoint>: Add argument. (target_remove_hw_breakpoint): Add argument. * target.c (debug_to_remove_hw_breakpoint): Add argument. (update_current_target): Update. * remote.c (remote_remove_hw_breakpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_remove_hw_breakpoint): Add 'self' argument. * i386-nat.c (i386_remove_hw_breakpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_remove_hw_breakpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_remove_hw_breakpoint): Add 'self' argument.
2014-02-19Add target_ops argument to to_insert_hw_breakpointTom Tromey1-1/+2
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_insert_hw_breakpoint>: Add argument. (target_insert_hw_breakpoint): Add argument. * target.c (debug_to_insert_hw_breakpoint): Add argument. (update_current_target): Update. * remote.c (remote_insert_hw_breakpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Add 'self' argument. * nto-procfs.c (procfs_insert_hw_breakpoint): Add 'self' argument. * i386-nat.c (i386_insert_hw_breakpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_insert_hw_breakpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Add 'self' argument.
2014-02-19Add target_ops argument to to_can_use_hw_breakpointTom Tromey1-1/+2
2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <to_can_use_hw_breakpoint>: Add argument. (target_can_use_hardware_watchpoint): Add argument. * target.c (debug_to_can_use_hw_breakpoint): Add argument. (update_current_target): Update. * spu-linux-nat.c (spu_can_use_hw_breakpoint): Add 'self' argument. * s390-linux-nat.c (s390_can_use_hw_breakpoint): Add 'self' argument. * remote.c (remote_check_watch_resources): Add 'self' argument. * remote-mips.c (mips_can_use_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Add 'self' argument. * procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Add 'self' argument. * nto-procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_can_use_hw_breakpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_can_use_hw_breakpoint): Add 'self' argument. * ia64-hpux-nat.c (ia64_hpux_can_use_hw_breakpoint): Add 'self' argument. * i386-nat.c (i386_can_use_hw_breakpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Add 'self' argument.
2014-02-19add "this" pointers to more target APIsTom Tromey1-2/+2
A subsequent pass introduces delegation helper functions to the target API. This delegation is much cleaner if the target_ops pointer is directly available at delegation time. This patch adds the "this" pointer to various to_* methods for this purpose. This updates a number of ports which I am unable to test. Please give them a look-over. Any possible problem here is trivial, though, as all that is required is adding an argument to a function. 2014-02-19 Tom Tromey <tromey@redhat.com> * aarch64-linux-nat.c (aarch64_linux_stopped_by_watchpoint): Add 'ops' argument. * arm-linux-nat.c (arm_linux_stopped_by_watchpoint): Add 'ops' argument. * i386-nat.c (i386_stopped_by_watchpoint): Add 'ops' argument. * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Add 'ops' argument. * inf-ttrace.c (inf_ttrace_stopped_by_watchpoint): Add 'ops' argument. * linux-nat.c (save_sigtrap): Update. (linux_nat_stopped_by_watchpoint, linux_nat_is_async_p) (linux_nat_can_async_p, linux_nat_async): Add 'ops' argument. (linux_nat_close): Update. * mips-linux-nat.c (mips_linux_stopped_by_watchpoint): Add 'ops' argument. * ppc-linux-nat.c (ppc_linux_stopped_by_watchpoint): Add 'ops' argument. * procfs.c (procfs_stopped_by_watchpoint): Add 'ops' argument. * record-full.c (record_full_beneath_to_stopped_by_watchpoint) (record_full_beneath_to_async, tmp_to_stopped_by_watchpoint) (tmp_to_async): Add 'ops' argument. (record_full_stopped_by_watchpoint, record_full_async) (record_full_can_async_p, record_full_is_async_p): Add 'ops' argument. * remote-m32r-sdi.c (m32r_insert_breakpoint, m32r_remove_breakpoint) (m32r_stopped_by_watchpoint): Add 'ops' argument. * remote-mips.c (mips_stopped_by_watchpoint): Add 'ops' argument. * remote.c (remote_stopped_by_watchpoint_p, remote_can_async_p) (remote_is_async_p, remote_async): Add 'ops' argument. (remote_stopped_data_address): Update. * s390-nat.c (s390_stopped_by_watchpoint): Add 'ops' argument. * target.c (update_current_target) (find_default_can_async_p, find_default_is_async_p): Update. (init_dummy_target): Update. (debug_to_stopped_by_watchpoint): Add 'ops' argument. * target.h (struct target_ops) <to_stopped_by_watchpoint, to_can_async_p, to_is_async_p, to_async>: Add 'ops' argument. (target_can_async_p, target_is_async_p, target_async) (target_stopped_by_watchpoint): Update.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-12-18gdb/Yufeng Zhang1-1/+4
* aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Set iov.iov_len with the real length in use. gdb/gdbserver/ * linux-aarch64-low.c (aarch64_linux_set_debug_regs): Set iov.iov_len with the real length in use.
2013-09-30 * aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid.Luis Machado1-3/+3
Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove. Replace BUILD_THREAD with ptid_build. Replace BUILD_LWP with ptid_build. Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * alphabsd-nat.c: Replace PIDGET with ptid_get_pid. * amd64-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * amd64bsd-nat.c: Replace PIDGET with ptid_get_pid. * arm-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * armnbsd-nat.c: Replace PIDGET with ptid_get_pid. * auxv.c: Likewise. * breakpoint.c: Likewise. * common/ptid.c (ptid_is_pid): Condense check for null_ptid and minus_one_ptid. (ptid_lwp_p): New function. (ptid_tid_p): New function. * common/ptid.h: Update comments for accessors. (ptid_lwp_p): New prototype. (ptid_tid_p): New prototype. * defs.h (PIDGET, TIDGET, MERGEPID): Do not define. * gcore.c: Replace PIDGET with ptid_get_pid. * gdbthread.h: Likewise. * gnu-nat.c: Likewise. * hppa-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * hppabsd-nat.c: Replace PIDGET with ptid_get_pid. * hppanbsd-nat.c: Likewise. * i386-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * i386bsd-nat.c: Replace PIDGET with ptid_get_pid. * ia64-linux-nat.c: Replace PIDGET with ptid_get_pid. * infcmd.c: Likewise. * inferior.h: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Replace PIDGET with ptid_get_pid. Replace GET_PID with ptid_get_pid. Replace is_lwp with ptid_lwp_p. Replace GET_LWP with ptid_get_lwp. Replace BUILD_LWP with ptid_build.
2013-09-122013-09-12 Andrew Pinski <apinski@cavium.com>Andrew Pinski1-0/+1
* aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Zero out regs.
2013-02-142013-02-14 Pedro Alves <palves@redhat.com>Yufeng Zhang1-68/+141
Yufeng Zhang <yufeng.zhang@arm.com> * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete. (aarch64_inferior_data, struct aarch64_inferior_data): Delete. (struct aarch64_process_info): New. (aarch64_process_list): New global. (aarch64_find_process_pid, aarch64_add_process) (aarch64_process_info_get): New functions. (aarch64_inferior_data_get): Delete. (aarch64_process_info_get): New function. (aarch64_forget_process): New function. (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement. (aarch64_linux_prepare_to_resume): Pass the lwp's pid to aarch64_get_debug_reg_state. (aarch64_notify_debug_reg_change): Use iterate_over_lwps instead of linux_nat_iterate_watchpoint_lwps. (aarch64_linux_new_fork): New function. (aarch64_linux_child_post_startup_inferior): Use aarch64_forget_process instead of aarch64_init_debug_reg_state. (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint) (aarch64_linux_remove_hw_breakpoint) (aarch64_handle_aligned_watchpoint) (aarch64_handle_unaligned_watchpoint) (aarch64_linux_insert_watchpoint) (aarch64_linux_remove_watchpoint) (aarch64_linux_stopped_data_address): Adjust to pass the current process id to aarch64_debug_reg_state. (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as linux_nat_new_fork hook, and aarch64_forget_process as linux_nat_forget_process hook; remove the call to register_inferior_data_with_cleanup.
2013-02-13ARI fix: Replace %llx with %s and phex().Marcus Shawcroft1-14/+16
2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com> * aarch64-linux-nat.c (debug_reg_change_callback) (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with %s and phex().
2013-02-13ARI fix: Replace long long with LONGEST.Marcus Shawcroft1-1/+1
* aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long with LONGEST.
generated by cgit v1.1 at 2024-11-22 10:02:30 +0000