| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently -break-insert always creates a wildmatching breakpoint, and
there's no way to ask for a fullname match. To address that, this
patch adds the equivalent of "break -qualified" to MI:
"-break-insert --qualified".
For the testcase, curiously, it doesn't look like we have _any_
testcase that tests a breakpoint with multiple locations, and, the
existing mi_create_breakpoint / mi_make_breakpoint procedures are only
good for breakpoints with a single location. This patch thus adds a
few new companion routines to mi-support.exp for breakpoints with
multiple locations: mi_create_breakpoint_multi,
mi_make_breakpoint_loc, mi_make_breakpoint_multi.
gdb/ChangeLog:
* NEWS: Document "-break-insert --qualified".
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Handle "--qualified".
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Breakpoint Commands): Document
"-break-insert --qualified" and "-dprintf-insert --qualified".
gdb/testsuite/ChangeLog:
* gdb.mi/mi-break-qualified.cc: New file.
* gdb.mi/mi-break-qualified.exp: New file.
* lib/mi-support.exp (mi_create_breakpoint_multi)
(mi_make_breakpoint_loc, mi_make_breakpoint_multi): New
procedures.
(mi_create_breakpoint_1): New, factored out from
mi_create_breakpoint.
|
|
gdb/ChangeLog:
* NEWS: Create a new section for the next release branch.
Rename the section of the current branch, now that it has
been cut.
|
|
A few changes have been made to make the register support simpler,
more flexible and extendible. The trigger for most of these changes
are the remarks [1] made earlier for v2 of this patch. The noticeable
improvements are:
- The arc XML target features are placed under gdb/features/arc
- There are two cores (based on ISA) and one auxiliary feature:
v1-core: ARC600, ARC601, ARC700
v2-core: ARC EM, ARC HS
aux: common in both
- The XML target features represent a minimalistic sane set of
registers irrespective of application (baremetal or linux).
- A concept of "feature" class has been introduced in the code.
The "feature" object is constructed from BFD and GDBARCH data.
It contains necessary information (ISA and register size) to
determine which XML target feature to use.
- A new structure (ARC_REGISTER_FEATURE) is added that allows
providing index, names, and the necessity of registers. This
simplifies the sanity checks and future extendibility.
- Documnetation has been updated to reflect ARC features better.
- Although the feature names has changed, there still exists
backward compatibility with older names through
find_obsolete_[core,aux]_names() functions.
The last two points were inspired from RiscV port.
[1]
https://sourceware.org/pipermail/gdb-patches/2020-May/168511.html
gdb/ChangeLog:
* arch/arc.h
(arc_gdbarch_features): New class to stir the selection of target XML.
(arc_create_target_description): Use FEATURES to choose XML target.
(arc_lookup_target_description): Use arc_create_target_description
to create _new_ target descriptions or return the already created
ones if the FEATURES is the same.
* arch/arc.c: Implementation of prototypes described above.
* gdb/arc-tdep.h (arc_regnum enum): Add more registers.
(arc_gdbarch_features_init): Initialize the FEATURES struct.
* arc-tdep.c (*_feature_name): Make feature names consistent.
(arc_register_feature): A new struct to hold information about
registers of a particular target/feature.
(arc_check_tdesc_feature): Check if XML provides registers in
compliance with ARC_REGISTER_FEATURE structs.
(arc_update_acc_reg_names): Add aliases for r58 and r59.
(determine_*_reg_feature_set): Which feature name to look for.
(arc_gdbarch_features_init): Given MACH and ABFD, initialize FEATURES.
(mach_type_to_arc_isa): Convert from a set of binutils machine types
to expected ISA enums to be used in arc_gdbarch_features structs.
* features/Makefile (FEATURE_XMLFILES): Add new files.
* gdb/features/arc/v1-aux.c: New file.
* gdb/features/arc/v1-aux.xml: Likewise.
* gdb/features/arc/v1-core.c: Likewise.
* gdb/features/arc/v1-core.xml: Likewise.
* gdb/features/arc/v2-aux.c: Likewise.
* gdb/features/arc/v2-aux.xml: Likewise.
* gdb/features/arc/v2-core.c: Likewise.
* gdb/features/arc/v2-core.xml: Likewise.
* NEWS (Changes since GDB 9): Announce obsolence of old feature names.
gdb/doc/ChangeLog:
* gdb.texinfo (Synopsys ARC): Update the documentation for ARC
Features.
gdb/testsuite/ChangeLog:
* gdb.arch/arc-tdesc-cpu.xml: Use new feature names.
|
|
Simon noticed that I managed to put this in the "Changes in GDB 9"
section by mistake instead of in the "Changes since GDB 9" section
where it belongs.
gdb/ChangeLog:
* NEWS: Move "Multi-target debugging support" item to the
"Changes since GDB 9" section.
|
|
This patch adds basic support for the eBPF target: tdep and build
machinery. The accompanying simulator is introduced in subsequent
patches.
gdb/ChangeLog:
2020-08-04 Weimin Pan <weimin.pan@oracle.com>
Jose E. Marchesi <jose.marchesi@oracle.com>
* configure.tgt: Add entry for bpf-*-*.
* Makefile.in (ALL_TARGET_OBS): Add bpf-tdep.o
(ALLDEPFILES): Add bpf-tdep.c.
* bpf-tdep.c: New file.
* MAINTAINERS: Add bpf target and maintainer.
gdb/doc/ChangeLog:
2020-08-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.texinfo (Contributors): Add information for the eBPF
support.
(BPF): New section.
|
|
gdb/ChangeLog:
* NEWS (New commands): Mention new command
"maintenance print core-file-backed-mappings".
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Add documentation for
new command "maintenance print core-file-backed-mappings".
|
|
gdb/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
* guile/scm-math.c (vlscm_integer_fits_p): Use 'uintmax_t'
and 'intmax_t' instead of 'scm_t_uintmax' and 'scm_t_intmax',
which are deprecated in Guile 3.0.
* configure.ac (try_guile_versions): Add "guile-3.0".
* configure (try_guile_versions): Regenerate.
* NEWS: Update entry.
gdb/testsuite/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
* gdb.guile/source2.scm: Add #f first argument to 'format'.
* gdb.guile/types-module.exp: Remove "ERROR:" from
regexps since Guile 3.0 no longer prints that.
gdb/doc/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
* doc/guile.texi (Guile Introduction): Mention Guile 3.0.
Change-Id: Iff116c2e40f334e4e0ca4e759a097bfd23634679
|
|
This primarily updates code that uses the I/O port API of Guile.
gdb/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
Doug Evans <dje@google.com>
PR gdb/21104
* guile/scm-ports.c (USING_GUILE_BEFORE_2_2): New macro.
(ioscm_memory_port)[read_buf_size, write_buf_size]: Wrap in #if
USING_GUILE_BEFORE_2_2.
(stdio_port_desc, memory_port_desc) [!USING_GUILE_BEFORE_2_2]:
Change type to 'scm_t_port_type *'.
(natural_buffer_size) [!USING_GUILE_BEFORE_2_2]: New variable.
(ioscm_open_port) [USING_GUILE_BEFORE_2_2]: Add 'stream'
parameter and honor it. Update callers.
(ioscm_open_port) [!USING_GUILE_BEFORE_2_2]: New function.
(ioscm_read_from_port, ioscm_write) [!USING_GUILE_BEFORE_2_2]: New
functions.
(ioscm_fill_input, ioscm_input_waiting, ioscm_flush): Wrap in #if
USING_GUILE_BEFORE_2_2.
(ioscm_init_gdb_stdio_port) [!USING_GUILE_BEFORE_2_2]: Use
'ioscm_read_from_port'. Call 'scm_set_port_read_wait_fd'.
(ioscm_init_stdio_buffers) [!USING_GUILE_BEFORE_2_2]: New function.
(gdbscm_stdio_port_p) [!USING_GUILE_BEFORE_2_2]: Use 'SCM_PORTP'
and 'SCM_PORT_TYPE'.
(gdbscm_memory_port_end_input, gdbscm_memory_port_seek)
(ioscm_reinit_memory_port): Wrap in #if USING_GUILE_BEFORE_2_2.
(gdbscm_memory_port_read, gdbscm_memory_port_write)
(gdbscm_memory_port_seek, gdbscm_memory_port_close)
[!USING_GUILE_BEFORE_2_2]: New functions.
(gdbscm_memory_port_print): Remove use of 'SCM_PTOB_NAME'.
(ioscm_init_memory_port_type) [!USING_GUILE_BEFORE_2_2]: Use
'gdbscm_memory_port_read'.
Wrap 'scm_set_port_end_input', 'scm_set_port_flush', and
'scm_set_port_free' calls in #if USING_GUILE_BEFORE_2_2.
(gdbscm_get_natural_buffer_sizes) [!USING_GUILE_BEFORE_2_2]: New
function.
(ioscm_init_memory_port): Remove.
(ioscm_init_memory_port_stream): New function
(ioscm_init_memory_port_buffers) [USING_GUILE_BEFORE_2_2]: New
function.
(gdbscm_memory_port_read_buffer_size) [!USING_GUILE_BEFORE_2_2]:
Return scm_from_uint (0).
(gdbscm_set_memory_port_read_buffer_size_x)
[!USING_GUILE_BEFORE_2_2]: Call 'scm_setvbuf'.
(gdbscm_memory_port_write_buffer_size) [!USING_GUILE_BEFORE_2_2]:
Return scm_from_uint (0).
(gdbscm_set_memory_port_write_buffer_size_x)
[!USING_GUILE_BEFORE_2_2]: Call 'scm_setvbuf'.
* configure.ac (try_guile_versions): Add "guile-2.2".
* configure: Regenerate.
* NEWS: Add entry.
gdb/testsuite/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
* gdb.guile/scm-error.exp ("source $remote_guile_file_1"): Relax
error regexp to match on Guile 2.2.
gdb/doc/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
* guile.texi (Memory Ports in Guile): Mark
'memory-port-read-buffer-size',
'set-memory-port-read-buffer-size!',
'memory-port-write-buffer-size',
'set-memory-port-read-buffer-size!' as deprecated.
* doc/guile.texi (Guile Introduction): Clarify which Guile
versions are supported.
Change-Id: Ib119b10a2787446e0ae482a5e1b36d809c44bb31
|
|
Add a new method gdb.Architecture.register_groups which returns a new
object of type gdb.RegisterGroupsIterator. This new iterator then
returns objects of type gdb.RegisterGroup.
Each gdb.RegisterGroup object just wraps a single reggroup pointer,
and (currently) has just one read-only property 'name' that is a
string, the name of the register group.
As with the previous commit (adding gdb.RegisterDescriptor) I made
gdb.RegisterGroup an object rather than just a string in case we want
to add additional properties in the future.
gdb/ChangeLog:
* NEWS: Mention additions to Python API.
* python/py-arch.c (archpy_register_groups): New function.
(arch_object_methods): Add 'register_groups' method.
* python/py-registers.c (reggroup_iterator_object): New struct.
(reggroup_object): New struct.
(gdbpy_new_reggroup): New function.
(gdbpy_reggroup_to_string): New function.
(gdbpy_reggroup_name): New function.
(gdbpy_reggroup_iter): New function.
(gdbpy_reggroup_iter_next): New function.
(gdbpy_new_reggroup_iterator): New function
(gdbpy_initialize_registers): Register new types.
(reggroup_iterator_object_type): Define new Python type.
(gdbpy_reggroup_getset): New static global.
(reggroup_object_type): Define new Python type.
* python/python-internal.h
gdb/testsuite/ChangeLog:
* gdb.python/py-arch-reg-groups.exp: New file.
gdb/doc/ChangeLog:
* gdb.texi (Registers): Add @anchor for 'info registers
<reggroup>' command.
* python.texi (Architectures In Python): Document new
register_groups method.
(Registers In Python): Document two new object types related to
register groups.
|
|
This commit adds a new method gdb.Architecture.registers that returns
an object of the new type gdb.RegisterDescriptorIterator. This
iterator returns objects of the new type gdb.RegisterDescriptor.
A RegisterDescriptor is not a way to read the value of a register,
this is already covered by Frame.read_register, a RegisterDescriptor
is simply a way to discover from Python, which registers are
available for a given architecture.
I did consider just returning a string, the name of each register,
instead of a RegisterDescriptor, however, I'm aware that it we don't
want to break the existing Python API in any way, so if I return just
a string now, but in the future we want more information about a
register then we would have to add a second API to get that
information. By going straight to a descriptor object now, it is easy
to add additional properties in the future should we wish to.
Right now the only property of a register that a user can access is
the name of the register.
In future we might want to be able to ask the register about is
register groups, or its type.
gdb/ChangeLog:
* Makefile.in (SUBDIR_PYTHON_SRCS): Add py-registers.c
* python/py-arch.c (archpy_registers): New function.
(arch_object_methods): Add 'registers' method.
* python/py-registers.c: New file.
* python/python-internal.h
(gdbpy_new_register_descriptor_iterator): Declare.
(gdbpy_initialize_registers): Declare.
* python/python.c (do_start_initialization): Call
gdbpy_initialize_registers.
* NEWS: Mention additions to the Python API.
gdb/testsuite/ChangeLog:
* gdb.python/py-arch-reg-names.exp: New file.
gdb/doc/ChangeLog:
* python.texi (Python API): Add new section the menu.
(Frames In Python): Add new @anchor.
(Architectures In Python): Document new registers method.
(Registers In Python): New section.
|
|
It could be useful to determine the architecture of a frame being
unwound during the frame unwind process, that is, before we have a
gdb.Frame, but when we only have a gdb.PendingFrame.
The PendingFrame already has a pointer to the gdbarch internally, this
commit just exposes an 'architecture' method to Python, and has this
return a gdb.Architecture object (list gdb.Frame.architecture does).
gdb/ChangeLog:
* NEWS: Mention new Python API method.
* python/py-unwind.c (pending_framepy_architecture): New function.
(pending_frame_object_methods): Add architecture method.
gdb/testsuite/ChangeLog:
* gdb.python/py-unwind.py (TestUnwinder::__call__): Add test for
gdb.PendingFrame.architecture method.
gdb/doc/ChangeLog:
* python.texi (Unwinding Frames in Python): Document
PendingFrame.architecture method.
|
|
This commit adds a new maintenance command that dumps the current
target description as an XML document. This is a maintenance command
as I currently only see this being useful for GDB developers, or for
people debugging a new remote target.
By default the command will print whatever the current target
description is, whether this was delivered by the remote, loaded by
the user from a file, or if it is a built in target within GDB.
The command can also take an optional filename argument. In this case
GDB loads a target description from the file, and then reprints it.
This could be useful for testing GDB's parsing of target descriptions,
or to check that GDB can successfully parse a particular XML
description.
It is worth noting that the XML description printed will not be an
exact copy of the document fed into GDB. For example this minimal
input file:
<target>
<feature name="abc">
<reg name="r1" bitsize="32"/>
</feature>
</target>
Will produce this output:
(gdb) maint print xml-tdesc path/to/file.xml
<?xml version="1.0"?>
<!DOCTYPE target SYSTEM "gdb-target.dtd">
<target>
<feature name="abc">
<reg name="r1" bitsize="32" type="int" regnum="0"/>
</feature>
</target>
Notice that GDB filled in both the 'type' and 'regnum' fields of the
<reg>. I think this is actually a positive as it means we get to
really understand how GDB processed the document, if GDB made some
assumptions that differ to those the user expected then hopefully this
will bring those issues to the users attention.
To implement this I have tweaked the output produced by the
print_xml_feature which is defined within the gdbsupport/ directory.
The changes I have made to this class are:
1. The <architecture>...</architecture> tags are now not produced if
the architecture name is NULL.
2. The <osabi>...</osabi> tags get a newline at the end.
3. And, the whole XML document is indented using white space in a
nested fashion (as in the example output above).
I think that these changes should be fine, the print_xml_feature class
is used:
1. In gdbserver to generate an XML document to send as the target
description to GDB.
2. In GDB as part of a self-check function, a target_desc is
converted to XML then parsed back into a target_desc. We then check
the before and after target_desc objects are the same.
3. In the new 'maint print xml-tdesc' command.
In all of these use cases adding the extra white space should be fine.
gdbsupport/ChangeLog:
* tdesc.cc (print_xml_feature::visit_pre): Use add_line to add
output content, and call indent as needed in all overloaded
variants.
(print_xml_feature::visit_post): Likewise.
(print_xml_feature::visit): Likewise.
(print_xml_feature::add_line): Two new overloaded functions.
* tdesc.h (print_xml_feature::indent): New member function.
(print_xml_feature::add_line): Two new overloaded member
functions.
(print_xml_feature::m_depth): New member variable.
gdb/ChangeLog:
* target-descriptions.c (tdesc_architecture_name): Protect against
NULL pointer dereference.
(maint_print_xml_tdesc_cmd): New function.
(_initialize_target_descriptions): Register new 'maint print
xml-tdesc' command and give it the filename completer.
* NEWS: Mention new 'maint print xml-tdesc' command.
gdb/testsuite/ChangeLog:
* gdb.xml/tdesc-reload.c: New file.
* gdb.xml/tdesc-reload.exp: New file.
* gdb.xml/maint-xml-dump-01.xml: New file.
* gdb.xml/maint-xml-dump-02.xml: New file.
* gdb.xml/maint-xml-dump.exp: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Document new 'maint print
xml-desc' command.
|
|
gdb/ChangeLog
2020-06-22 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention change to the alias command.
gdb/doc/ChangeLog
2020-06-22 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command aliases default args): New node documenting
how to use default args for a command using aliases.
(Aliases): Document the new 'DEFAULT-ARGS...' option.
(Help): Update help aliases text and describe when full alias
definition is provided.
|
|
gdb/ChangeLog:
* NEWS: Mention removed GDBserver host support.
Change-Id: Ib9e212e525d12ac7f3f9b5c056adc5bf9c4d52cd
|
|
Fix a few typos in gdb/NEWS.
gdb/ChangeLog:
2020-06-05 Tom de Vries <tdevries@suse.de>
* NEWS: Fix typos.
|
|
This reverts commit eca1f90cf47a2edc1a1cd22e12c6c0f3b900654e. Several
changes were requested, and it seemed simplest to revert it.
gdb/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
Revert commit eca1f90c:
* NEWS: Remove entry for completion styling.
* completer.c (_rl_completion_prefix_display_length): Move
declaration later.
(gdb_fnprint): Revert.
(gdb_display_match_list_1): Likewise.
* cli/cli-style.c (completion_prefix_style)
(completion_difference_style, completion_suffix_style): Remove.
(_initialize_cli_style): Revert.
* cli/cli-style.h (completion_prefix_style)
(completion_difference_style, completion_suffix_style): Don't
declare.
gdb/doc/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Output Styling): Don't mention completion styling.
(Editing): Don't mention readline completion styling.
gdb/testsuite/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Remove completion styling test.
* lib/gdb-utils.exp (style): Remove completion styles.
|
|
Readline has a styling feature for completion -- if it is enabled, the
common prefix of completions will be displayed in a different style.
This doesn't work in gdb, because gdb implements its own completer.
This patch implements the feature. However, it doesn't directly use
the Readline feature, because gdb can do a bit better: it can let the
user control the styling using the existing mechanisms.
This version incorporates an Emacs idea, via Eli: style the prefix,
the "difference character", and the suffix differently.
gdb/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* NEWS: Add entry for completion styling.
* completer.c (_rl_completion_prefix_display_length): Move
declaration earlier.
(gdb_fnprint): Use completion_style.
(gdb_display_match_list_1): Likewise.
* cli/cli-style.c (completion_prefix_style)
(completion_difference_style, completion_suffix_style): New
globals.
(_initialize_cli_style): Register new globals.
* cli/cli-style.h (completion_prefix_style)
(completion_difference_style, completion_suffix_style): Declare.
gdb/doc/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Output Styling): Mention completion styling.
(Editing): Mention readline completion styling.
gdb/testsuite/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add completion styling test.
* lib/gdb-utils.exp (style): Add completion styles.
|
|
The patch makes GDB do exec-file-mismatch validation by comparing
build IDs instead of the current method of comparing filenames.
Currently, the exec-file-mismatch feature simply compares filenames to
decide whether the exec file loaded in gdb and the exec file the
target reports is running match. This causes false positives when
remote debugging, because it'll often be the case that the paths in
the host and the target won't match. And of course misses the case of
the files having the same name but being actually different files
(e.g., different builds).
This also broke many testcases when running against gdbserver, causing
tests to be skipped like (here native-extended-gdbserver):
(gdb) run
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink-filelink
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink-filelink
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink"? (y or n) UNTESTED: gdb.base/argv0-symlink.exp: could not run to main
or to fail like (here native-gdbserver):
(gdb) spawn /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/../../gdbserver/gdbserver --once localhost:2346 /home/pedro/gdb/binutils-gdb/build/gdb/te
stsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x
Process /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x created; pid = 20040
Listening on port 2346
target remote localhost:2346
Remote debugging using localhost:2346
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/temp/19968/skip_btrace_tests-19968.x
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x"? (y or n) Quit
(gdb) UNSUPPORTED: gdb.btrace/buffer-size.exp: target does not support record-btrace
The former case is about GDB not realizing the two files are the same,
because one of the them is a symlink to the other. The latter case is
about GDB realizing that one file is a copy of the other.
Over the years, the toolchain has settled on build ID matching being
the canonical method to match core dumps to executables, and
executables with no debug info to their debug info.
This patch makes us use build IDs to match the running image of a
binary with its version loaded in gdb, which may or may not have debug
info. This is very much like the core dump/executable matching.
The change to gdb_bfd_open is necessary to get rid of the "transfers
from remote targets can be slow" warning when we open the remote file
to read its build ID:
(gdb) r
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/break/break
Reading /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/break/break
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink"? (y or n)
While trying this out, I was worried that bfd would read a lot of
stuff from the binary in order to extract the build ID, making it
potentially slow, but turns out we don't read all that much. Maybe a
couple hundred bytes, and most of it seemingly is the read-ahead
cache. So I'm not worried about that. Otherwise I'd consider whether
a new qXfer:buildid:read would be better. But I'm happy that we
seemingly don't need to worry about it.
gdb/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* NEWS (set exec-file-mismatch): Adjust entry.
* exec.c: Include "build-id.h".
(validate_exec_file): Try to match build IDs instead of filenames.
* gdb_bfd.c (struct gdb_bfd_open_closure): New.
(gdb_bfd_iovec_fileio_open): Adjust to use gdb_bfd_open_closure
and pass down 'warn_if_slow'.
(gdb_bfd_open): Add 'warn_if_slow' parameter. Use
gdb_bfd_open_closure to pass it down.
* gdb_bfd.h (gdb_bfd_open): Add 'warn_if_slow' parameter.
gdb/doc/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Attach): Update exec-file-mismatch description to
mention build IDs.
(Separate Debug Files): Add "build id" anchor.
|
|
gdb/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention changes to help and apropos.
gdb/doc/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Help): Document the help and apropos changes.
(Aliases): Document new meaning of -a abbreviation flag.
|
|
Now that Python code can create TUI windows, it seemed appropriate to
allow Python commands to appear in the "TUI" help class. This patch
adds this capability.
gdb/ChangeLog
2020-04-28 Tom Tromey <tom@tromey.com>
* NEWS: Update.
* python/py-cmd.c (gdbpy_initialize_commands): Add COMMAND_TUI.
(cmdpy_init): Allow class_tui.
gdb/doc/ChangeLog
2020-04-28 Tom Tromey <tom@tromey.com>
* python.texi (Commands In Python): Document gdb.COMMAND_TUI.
|
|
This changes the gdb Python API to add support for dynamic types. In
particular, this adds an attribute to gdb.Type, and updates some
attributes to reflect dynamic sizes and field offsets.
There's still no way to get the dynamic type from one of its concrete
instances. This could perhaps be added if needed.
gdb/ChangeLog
2020-04-24 Tom Tromey <tromey@adacore.com>
PR python/23662:
* python/py-type.c (convert_field): Handle
FIELD_LOC_KIND_DWARF_BLOCK.
(typy_get_sizeof): Handle TYPE_HAS_DYNAMIC_LENGTH.
(typy_get_dynamic): Nw function.
(type_object_getset): Add "dynamic".
* NEWS: Add entry.
gdb/doc/ChangeLog
2020-04-24 Tom Tromey <tromey@adacore.com>
PR python/23662:
* python.texi (Types In Python): Document new features.
gdb/testsuite/ChangeLog
2020-04-24 Tom Tromey <tromey@adacore.com>
PR python/23662:
* gdb.ada/variant.exp: Add Python checks.
* gdb.rust/simple.exp: Add dynamic type checks.
|
|
Replace "the the" by "the".
gdb/ChangeLog:
2020-03-06 Tom de Vries <tdevries@suse.de>
* NEWS: Fix "the the".
* ctfread.c: Same.
gdb/doc/ChangeLog:
2020-03-06 Tom de Vries <tdevries@suse.de>
* gdb.texinfo: Fix "the the".
gdb/testsuite/ChangeLog:
2020-03-06 Tom de Vries <tdevries@suse.de>
* README: Fix "the the".
* gdb.base/dprintf.exp: Same.
|
|
For WOW64 processes, the Wow64* variants of SuspendThread,
GetThreadContext, SetThreadContext, and GetThreadSelectorEntry have to
be used instead.
And instead of EnumProcessModules, EnumProcessModulesEx with
LIST_MODULES_32BIT is necessary.
gdb/ChangeLog:
2020-03-04 Hannes Domani <ssbssa@yahoo.de>
* NEWS: Mention support for WOW64 processes.
* amd64-windows-nat.c (amd64_mappings): Rename and remove static.
(amd64_windows_segment_register_p): Remove static.
(_initialize_amd64_windows_nat): Update.
* configure.nat <windows> (NATDEPFILES): Add i386-windows-nat.o.
* i386-windows-nat.c (context_offset): Update.
(i386_mappings): Rename and remove static.
(i386_windows_segment_register_p): Remove static.
(_initialize_i386_windows_nat): Update.
* windows-nat.c (STATUS_WX86_BREAKPOINT): New macro.
(STATUS_WX86_SINGLE_STEP): New macro.
(EnumProcessModulesEx): New macro.
(Wow64SuspendThread): New macro.
(Wow64GetThreadContext): New macro.
(Wow64SetThreadContext): New macro.
(Wow64GetThreadSelectorEntry): New macro.
(windows_set_context_register_offsets): Add static.
(windows_set_segment_register_p): Likewise.
(windows_add_thread): Adapt for WOW64 processes.
(windows_fetch_one_register): Likewise.
(windows_nat_target::fetch_registers): Likewise.
(windows_store_one_register): Likewise.
(display_selector): Likewise.
(display_selectors): Likewise.
(handle_exception): Likewise.
(windows_continue): Likewise.
(windows_nat_target::resume): Likewise.
(windows_add_all_dlls): Likewise.
(do_initial_windows_stuff): Likewise.
(windows_nat_target::attach): Likewise.
(windows_get_exec_module_filename): Likewise.
(windows_nat_target::create_inferior): Likewise.
(windows_xfer_siginfo): Likewise.
(_initialize_loadable): Initialize Wow64SuspendThread,
Wow64GetThreadContext, Wow64SetThreadContext,
Wow64GetThreadSelectorEntry and EnumProcessModulesEx.
* windows-nat.h (windows_set_context_register_offsets):
Remove declaration.
(windows_set_segment_register_p): Likewise.
(i386_windows_segment_register_p): Add declaration.
(amd64_windows_segment_register_p): Likewise.
|
|
This commit aims to give a cleaner mechanism by which the user can
prevent GDB from trying to load any previous command history.
Currently the user can change the path to the history file, either
using a command line flag, or by setting the GDBHISTFILE environment
variable, and if the path is set to a non-existent file, then
obviously GDB wont load any command history. However, this feels like
a bit of a bodge, I'd like to add an official mechanism by which we
can disable command history loading.
Why would we want to prevent command history loading? The specific
use case I have is GDB starting with a CWD that is a network mounted
directory, and there is no command history present. Still GDB will
access the network in order to check for the file. In my particular
use case I'm actually starting a large number of GDB instances in
parallel, all in the same network mounted directory, the large number
of network accesses looking for this file introduces a noticeable
delay at GDB startup.
The approach I'm proposing here is a slight adjustment to the current
rules for setting up the history filename. Currently, if a user does
this, they see an error:
(gdb) set history filename
Argument required (filename to set it to.).
However, if a user does this:
$ GDBHISTFILE= gdb --quiet
(gdb) set history save on
(gdb) q
warning: Could not rename -gdb18416~ to : No such file or directory
So, we already have a bug in this area. My plan is to allow the empty
filename to be accepted, and for this to mean, neither load, nor save
the command history.
This does mean that we now have two mechanisms to prevent saving the
command history:
(gdb) set history filename
or
(gdb) set history save off
But the only way to prevent loading the command history is to set the
filename to the empty string _before_ you get to a GDB prompt, either
using a command line option, or the environment variable.
I've updated some of the show commands, for example this session:
(gdb) set history filename
(gdb) show history filename
There is no filename currently set for recording the command history in.
(gdb) show history save
Saving of the history record on exit is off.
(gdb) set history save on
(gdb) show history save
Saving of the history is disabled due to the value of 'history filename'.
(gdb) set history filename /tmp/hist
(gdb) show history save
Saving of the history record on exit is on.
I've updated the manual, and added some tests.
gdb/ChangeLog:
* NEWS: Mention new behaviour of the history filename.
* top.c (write_history_p): Add comment.
(show_write_history_p): Add header comment, give a different
message when history writing is on, but the history filename is
empty.
(history_filename): Add comment.
(history_filename_empty): New function.
(show_history_filename): Add header comment, give a different
message when the filename is empty.
(init_history): Compare history_filename against nullptr, and only
read history if the filename is not empty.
(set_history_filename): Add header comment, and only make
non-empty filenames absolute.
(init_main): Make the filename argument to 'set history filename'
optional.
gdb/doc/ChangeLog:
* gdb.texinfo (Command History): Extend description for
GDBHISTFILE and GDBHISTSIZE, add detail about the filename for
'set history filename' being optional. Describe the effect of an
empty history filename on 'set history save on'.
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Remove test of 'set history filename'.
* gdb.base/gdbinit-history.exp: Add tests for setting the history
filename to the empty string.
* lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE
and GDBHISTSIZE.
Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
|
|
debuginfod is a lightweight web service that indexes ELF/DWARF debugging
resources by build-id and serves them over HTTP.
This patch enables GDB to query debuginfod servers for separate debug
files and source code when it is otherwise not able to find them.
GDB can be built with debuginfod using the --with-debuginfod configure
option.
This requires that libdebuginfod be installed and found at configure time.
debuginfod is packaged with elfutils, starting with version 0.178.
For more information see https://sourceware.org/elfutils/.
Tested on x86_64 Fedora 31.
gdb/ChangeLog:
2020-02-26 Aaron Merey <amerey@redhat.com>
* Makefile.in: Handle optional debuginfod support.
* NEWS: Update.
* README: Add --with-debuginfod summary.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle optional debuginfod support.
* debuginfod-support.c: debuginfod helper functions.
* debuginfod-support.h: Ditto.
* doc/gdb.texinfo: Add --with-debuginfod to configure options
summary.
* dwarf2/read.c (dwarf2_get_dwz_file): Query debuginfod servers
when a dwz file cannot be found.
* elfread.c (elf_symfile_read): Query debuginfod servers when a
debuginfo file cannot be found.
* source.c (open_source_file): Query debuginfod servers when a
source file cannot be found.
* top.c (print_gdb_configuration): Include
--{with,without}-debuginfod in the output.
gdb/testsuite/ChangeLog:
2020-02-26 Aaron Merey <amerey@redhat.com>
* gdb.debuginfod: New directory for debuginfod tests.
* gdb.debuginfod/main.c: New test file.
* gdb.debuginfod/fetch_src_and_symbols.exp: New tests.
|
|
This patch adds support for writing new TUI windows in Python.
2020-02-22 Tom Tromey <tom@tromey.com>
* NEWS: Add entry for gdb.register_window_type.
* tui/tui-layout.h (window_factory): New typedef.
(tui_register_window): Declare.
* tui/tui-layout.c (saved_tui_windows): New global.
(tui_apply_current_layout): Use it.
(tui_register_window): New function.
* python/python.c (do_start_initialization): Call
gdbpy_initialize_tui.
(python_GdbMethods): Add "register_window_type" function.
* python/python-internal.h (gdbpy_register_tui_window)
(gdbpy_initialize_tui): Declare.
* python/py-tui.c: New file.
* Makefile.in (SUBDIR_PYTHON_SRCS): Add py-tui.c.
gdb/doc/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* python.texi (Python API): Add menu item.
(TUI Windows In Python): New node.
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.python/tui-window.exp: New file.
* gdb.python/tui-window.py: New file.
Change-Id: I85fbfb923a1840450a00a7dce113a05d7f048baa
|
|
This changes the TUI layout engine to add horizontal splitting. Now,
windows can be side-by-side.
A horizontal split is defined using the "-horizontal" parameter to
"tui new-layout".
This also adds the first "winheight" test to the test suite. One open
question is whether we want a new "winwidth" command, now that
horizontal layouts are possible. This is easily done using the
generic layout code.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
PR tui/17850:
* tui/tui-win.c (tui_gen_win_info::max_width): New method.
* tui/tui-layout.h (class tui_layout_base) <get_sizes>: Add
"height" argument.
(class tui_layout_window) <get_sizes>: Likewise.
(class tui_layout_split) <tui_layout_split>: Add "vertical"
argument.
<get_sizes>: Add "height" argument.
<m_vertical>: New field.
* tui/tui-layout.c (tui_layout_split::clone): Update.
(tui_layout_split::get_sizes): Add "height" argument.
(tui_layout_split::adjust_size, tui_layout_split::apply): Update.
(tui_new_layout_command): Parse "-horizontal".
(_initialize_tui_layout): Update help string.
(tui_layout_split::specification): Add "-horizontal" when needed.
* tui/tui-layout.c (tui_layout_window::get_sizes): Add "height"
argument.
* tui/tui-data.h (struct tui_gen_win_info) <max_width, min_width>:
New methods.
gdb/doc/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
PR tui/17850:
* gdb.texinfo (TUI Commands): Document horizontal layouts.
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
PR tui/17850:
* gdb.tui/new-layout.exp: Add horizontal layout and winheight
tests.
Change-Id: I38b35e504f34698578af86686be03c0fefd954ae
|
|
This adds a new command, "tui new-layout". This command can be used
to define a new TUI window layout.
The command is used like:
(gdb) tui new-layout name src 1 regs 1 status 0 cmd 1
The first argument is the name of the layout. In this example, it is
"name", so the new layout could be seen by "layout name".
Subsequent arguments come in pairs, where the first item in a pair is
the name of a window, and the second item in a pair is the window's
weight. A weight is just an integer -- a window's allocated size is
proportional to the total of the weights given. So, in the above
example, all windows will have the same size (the status windows's
weight does not matter, because it has fixed height).
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* NEWS: Add "tui new-layout" item.
* tui/tui-layout.c (add_layout_command): Return cmd_list_element.
Add new-layout command to help text.
(validate_window_name): New function.
(tui_new_layout_command): New function.
(_initialize_tui_layout): Register "new-layout".
(tui_layout_window::specification): New method.
(tui_layout_window::specification): New method.
* tui/tui-layout.h (class tui_layout_base) <specification>: New
method.
(class tui_layout_window) <specification>: New method.
(class tui_layout_split) <specification>: New method.
gdb/doc/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.texinfo (TUI Overview): Mention user layouts.
(TUI Commands): Document "tui new-layout".
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.tui/new-layout.exp: New file.
Change-Id: Id7c3ace20ab1e8924f8f4ad788f40210f58a5c05
|
|
Implement RISC-V/Linux support for both RV64 and RV32 systems, including
XML target description handling based on features determined, GPR and
FPR regset support including dynamic sizing of the latter, and software
breakpoint handling. Define two NT_FPREGSET regsets of a different size
matching the FPR sizes supported for generic `gdbserver' code to pick
from according to what the OS supplies.
Also handle a glibc bug where ELF_NFPREG is defined in terms of NFPREG,
however NFPREG is nowhere defined.
2020-02-19 Maciej W. Rozycki <macro@wdc.com>
Andrew Burgess <andrew.burgess@embecosm.com>
gdb/
* NEWS: Mention RISC-V GNU/Linux GDBserver support.
gdbserver/
* linux-riscv-low.cc: New file.
* Makefile.in (SFILES): Add linux-riscv-low.cc, arch/riscv.c,
and nat/riscv-linux-tdesc.c.
* configure.srv <riscv*-*-linux*> (srv_tgtobj)
(srv_linux_regsets, srv_linux_usrregs, srv_linux_thread_db):
Define.
|
|
Uses the $_siginfo convenience variable to show the last exception.
The type looks like this:
(gdb) pt $_siginfo
type = struct EXCEPTION_RECORD {
DWORD ExceptionCode;
DWORD ExceptionFlags;
struct EXCEPTION_RECORD *ExceptionRecord;
PVOID ExceptionAddress;
DWORD NumberParameters;
ULONG_PTR ExceptionInformation[15];
}
EXCEPTION_RECORD is documented at [1].
Example:
Program received signal SIGSEGV, Segmentation fault.
main () at crasher.c:4
4 *(int*)0x123 = 0;
(gdb) p $_siginfo
$1 = {
ExceptionCode = 3221225477,
ExceptionFlags = 0,
ExceptionRecord = 0x0,
ExceptionAddress = 0x401632 <main+18>,
NumberParameters = 2,
ExceptionInformation = {1, 291, 0 <repeats 13 times>}
}
(gdb) p/x $_siginfo.ExceptionCode
$2 = 0xc0000005
(gdb) p/x $_siginfo.ExceptionInformation[1]
$3 = 0x123
And 0xc0000005 is the value of EXCEPTION_ACCESS_VIOLATION.
[1] https://docs.microsoft.com/en-us/windows/win32/api/winnt/ns-winnt-exception_record
gdb/ChangeLog:
2020-02-09 Hannes Domani <ssbssa@yahoo.de>
* NEWS: Mention $_siginfo support for Windows.
* windows-nat.c (handle_exception): Set siginfo_er.
(windows_nat_target::mourn_inferior): Reset siginfo_er.
(windows_xfer_siginfo): New function.
(windows_nat_target::xfer_partial): Call windows_xfer_siginfo.
* windows-tdep.c (struct windows_gdbarch_data): New struct.
(init_windows_gdbarch_data): New function.
(get_windows_gdbarch_data): New function.
(windows_get_siginfo_type): New function.
(windows_init_abi): Register windows_get_siginfo_type.
(_initialize_windows_tdep): Register init_windows_gdbarch_data.
gdbserver/ChangeLog:
2020-02-09 Hannes Domani <ssbssa@yahoo.de>
* win32-low.c (win32_clear_inferiors): Reset siginfo_er.
(handle_exception): Set siginfo_er.
(win32_xfer_siginfo): New function.
|
|
Mention in NEWS the new option and the set/show commands.
Document in gdb.texinfo the new option and the set/show commands.
gdb/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention the new option and the set/show commands.
gdb/doc/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Attach): Document the new option and the
set/show commands.
(Connecting): Reference the exec-file-mismatch option.
|
|
This commit documents the new multi-target features in both NEWS and
user manual.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* NEWS: Mention multi-target debugging, "info connections", and
"add-inferior -no-connection".
gdb/doc/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Say "current inferior not connected"
instead of "GDB not connected".
(Inferiors and Programs): Rename node to ...
(Inferiors Connections and Programs): ... this. Update all
references. Talk about multiple target connections. Update "info
inferiors" info to mention the connections column. Describe "info
connections". Document "add-inferior -no-connection".
* guile.texi, python.texi: Update cross references.
|
|
gdb/ChangeLog
2020-01-06 Eli Zaretskii <eliz@gnu.org>
* NEWS: Mention the recent fix of $_exitsignal on MS-Windows.
|
|
Now that we enabled it by default, this change adds a NEWS entry for it.
gdb/ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention that multithreaded symbol loading is now on by
default.
Change-Id: Ic344596a3b1b6e612a0071a50df49588b833c15d
|
|
gdb/ChangeLog:
* NEWS: Create a new section for the next release branch.
Rename the section of the current branch, now that it has
been cut.
|
|
The option framework documentation was speaking about a 'print -raw'
option, but this option does not exist.
This patch implements -raw-values option that tells to ignore the
active pretty printers when printing a value.
As we already have -raw-frame-arguments, I thought -raw-values
was more clear, in particular to differentiate
set print raw-values and set print raw-frame-arguments.
gdb/doc/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command Options): Use -p and -pretty in the example,
as -r is ambiguous. Update the print - TAB TAB completion result.
(Data): Document new option -raw-values. Use -p and -pretty in the
example, as -r is ambiguous.
(Print Settings): Document set print raw values.
(Pretty-Printer Commands): Document interaction between enabled
pretty printers and -raw-values/-raw-frame-arguments.
gdb/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Document -raw-values option and the related setting commands.
* printcmd.c (print_command_parse_format): Do not set opts->raw off,
only set it on when /r is given.
* valprint.c (value_print_option_defs): New element raw-values.
* Makefile.in: Add the new file.
gdb/testsuite/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/options.exp: Add -raw-values in the print completion list.
* gdb.python/py-prettyprint.exp: Add tests for -raw-values.
|
|
Two new MI command -symbol-info-module-variables and
-symbol-info-module-functions, which are the equivalent of the CLI
command 'info module variables' and 'info module functions'. These
return information about functions and variables within Fortran
modules.
gdb/ChangeLog:
* mi/mi-cmds.c (mi_cmds): Add -symbol-info-module-functions and
-symbol-info-module-variables entries.
* mi/mi-cmds.h (mi_cmd_symbol_info_module_functions): Declare.
(mi_cmd_symbol_info_module_variables): Declare.
* mi/mi-symbol-cmds.c
(module_symbol_search_iterator): New typedef.
(output_module_symbols_in_single_module_and_file): New function.
(output_module_symbols_in_single_module): New function.
(mi_info_module_functions_or_variables): New function.
(mi_cmd_symbol_info_module_functions): New function.
(mi_cmd_symbol_info_module_variables): New function.
* NEWS: Mention new MI command.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (GDB/MI Symbol Query): Document new MI command
-symbol-info-module-functions and -symbol-info-module-variables.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-fortran-modules.exp: Add additional tests for
-symbol-info-module-functions and -symbol-info-module-variables.
Change-Id: Ic96f12dd14bd7e34774c3cde008fec30a4055bfe
|
|
This adds the ability to change the color of the TUI borders, both
ordinary and active. Unlike other styling options, this doesn't allow
setting the intensity, because that is already done by the TUI in a
different way.
gdb/ChangeLog
2019-12-01 Tom Tromey <tom@tromey.com>
* NEWS: Document new settings.
* tui/tui-wingeneral.c (box_win): Apply appropriate border style.
* tui/tui-win.c (_initialize_tui_win): Add border style
observers.
* tui/tui-io.h (tui_apply_style): Declare.
* tui/tui-io.c (tui_apply_style): Rename from apply_style. No
longer static.
(apply_ansi_escape, tui_set_reverse_mode): Update.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Add "skip_intensity" parameter.
<changed>: New member.
<do_set_value>: Declare.
(tui_border_style, tui_active_border_style): Declare.
* cli/cli-style.c (tui_border_style, tui_active_border_style): New
globals.
(cli_style_option): Initialize "changed".
(cli_style_option::do_set_value): New function.
(cli_style_option::add_setshow_commands): Add "skip_intensity"
parameter. Update.
(STYLE_ADD_SETSHOW_COMMANDS): Add "SKIP" parameter.
(_initialize_cli_style): Update. Create TUI border style
commands.
gdb/doc/ChangeLog
2019-12-01 Tom Tromey <tom@tromey.com>
* gdb.texinfo (TUI Configuration): Mention TUI border styles.
(Output Styling): Document new settings.
Change-Id: Id13e2af0af2a0bde61282752f2c379db3220c9fc
|
|
The source window currently uses a field width of 6 for line numbers,
and it further aligns to the next tab stop. This seemed a bit
wasteful of horizontal space to me, so I changed that in an earlier
patch.
However, that change wasn't universally popular. This patch instead
adds the option to use less horizontal space in the TUI source window.
gdb/ChangeLog
2019-12-01 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (tui_copy_source_line): Add "ndigits"
parameter.
* tui/tui-winsource.c (tui_copy_source_line): Add "ndigits"
parameter.
* tui/tui-win.h (compact_source): Declare.
* tui/tui-win.c (compact_source): New global.
(tui_set_compact_source, tui_show_compact_source): New functions.
(_initialize_tui_win): Add "compact-source" setting.
* tui/tui-source.c (tui_source_window::set_contents): Handle
compact_source setting.
* tui/tui-disasm.c (tui_disasm_window::set_contents): Update.
* NEWS: Document new setting.
gdb/doc/ChangeLog
2019-12-01 Tom Tromey <tom@tromey.com>
* gdb.texinfo (TUI Configuration): Document new setting.
Change-Id: I46ce9a68b12c9c79332d510f9c14b3c84b7efadd
|
|
gdb/ChangeLog
2019-11-30 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention define-prefix. Tell that command names can now
contain a . character.
gdb/doc/ChangeLog
2019-11-30 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Define): Indicate that user-defined prefix can
be used in 'define' command. Document 'define-prefix' command.
|
|
Just to let people know that this is available and how to use it.
Also updates the description of the setting to say the default is 0.
gdb/ChangeLog:
2019-11-26 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention the new multithreaded symbol loading.
Change-Id: I263add6aae03b523f0870ad4d1e972eada4b382a
|
|
Add '-symbol-info-modules', an MI version of the CLI 'info modules'
command.
gdb/ChangeLog:
* mi/mi-cmds.c (mi_cmds): Add 'symbol-info-modules' entry.
* mi/mi-cmds.h (mi_cmd_symbol_info_modules): Declare.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_info_modules): New function.
* NEWS: Mention new MI command.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-fortran-modules-2.f90: New file.
* gdb.mi/mi-fortran-modules.exp: New file.
* gdb.mi/mi-fortran-modules.f90: New file.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (GDB/MI Symbol Query): Document new MI command
-symbol-info-modules.
Change-Id: Ibc618010d1d5f36ae8a8baba4fb9d9d724e62b0f
|
|
Add new MI commands -symbol-info-functions, -symbol-info-variables,
and -symbol-info-types which correspond to the CLI commands 'info
functions', 'info variables', and 'info types' respectively.
gdb/ChangeLog:
* mi/mi-cmds.c (mi_cmds): Add '-symbol-info-functions',
'-symbol-info-types', and '-symbol-info-variables'.
* mi/mi-cmds.h (mi_cmd_symbol_info_functions): Declare.
(mi_cmd_symbol_info_types): Declare.
(mi_cmd_symbol_info_variables): Declare.
* mi/mi-symbol-cmds.c: Add 'source.h' and 'mi-getopt.h' includes.
(output_debug_symbol): New function.
(output_nondebug_symbol): New function.
(mi_symbol_info): New function.
(mi_info_functions_or_variables): New function.
(mi_cmd_symbol_info_functions): New function.
(mi_cmd_symbol_info_types): New function.
(mi_cmd_symbol_info_variables): New function.
* NEWS: Mention new commands.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-sym-info-1.c: New file.
* gdb.mi/mi-sym-info-2.c: New file.
* gdb.mi/mi-sym-info.exp: New file.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (GDB/MI Symbol Query): Document new MI command
-symbol-info-functions, -symbol-info-types, and
-symbol-info-variables.
Change-Id: Ic2fc6a6750bbce91cdde2344791014e5ef45642d
|
|
This adds maint commands to control the number of worker threads that
gdb can use.
2019-11-26 Tom Tromey <tom@tromey.com>
* NEWS: Add entry.
* maint.c (_initialize_maint_cmds): Add "worker-threads" maint
commands. Call update_thread_pool_size.
(update_thread_pool_size, maintenance_set_worker_threads): New
functions.
(n_worker_threads): New global.
gdb/doc/ChangeLog
2019-11-26 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document new maint
commands.
Change-Id: I4fb514faa05879d8afe62c77036a4469d57dca2a
|
|
While debugging, i felt the need to adjust the truncation length of remote
packets so i could see more or less data as needed. The default is currently
set to 512 bytes.
This patch makes this option adjustable through the new "set debug
remote-packet-max-chars" command. It can be set to unlimited if we want to
completely disable truncation.
Update on v5:
- Adjusted function and variable documentation, NEWS entry and GDB manual.
gdb/ChangeLog:
2019-11-25 Luis Machado <luis.machado@linaro.org>
* NEWS (New Commands): Mention "set debug remote-packet-max-chars".
* remote.c (REMOTE_DEBUG_MAX_CHAR): Remove.
(remote_packet_max_chars): New static global.
(show_remote_packet_max_chars): New function.
(remote_target::putpkt_binary): Adjust to use new
remote_packet_max_chars option.
(remote_target::getpkt_or_notif_sane_1): Likewise.
(_initialize_remote): Register new remote-packet-max-chars option.
gdb/doc/ChangeLog:
2019-11-25 Luis Machado <luis.machado@linaro.org>
* gdb.texinfo (Debugging Output): Document set debug
remote-packet-max-chars.
Change-Id: I2e871b37bfcaa6376537c3fe3db8f016dd806a7c
|
|
As Sergio pointed out, the TUI resizing tests are flaky. Debugging
this showed three main problems.
1. expect's "stty" command processes its arguments one-by-one. So,
rather than requesting a single resize, it sends two separate resize
requests (one for rows and one for columns). This means gdb sees two
SIGWINCH signals and resizes the terminal twice.
I consider this a bug in expect, but I couldn't readily see how to
report a bug; and anyway the fix wouldn't propagate very quickly.
This patch works around this problem by explicitly doing two separate
resizes (so it will be robust if expect ever does change); and then by
waiting for each resize to complete before continuing.
2. gdb uses curses to drive the console rendering. Currently the test
suite looks for terminal text insertion sequences to decide when a
command has completed. However, it turns out that, sometimes, curses
can output things in non-obvious ways. I didn't debug into curses but
I guess this can happen due to output optimizations. No matter the
reason, sometimes the current approach of only tracking text
insertions is not enough to detect that gdb has finished rendering.
This patch fixes this problem by arranging to detect the termination
output after any curses command, not just insertion.
3. Detecting when a resize has completed is tricky. In fact, I could
not find a way to reliably do this.
This patch fixes this problem by adding a special maint
"tui-resize-message" setting to gdb. When this is enabled, gdb will
print a message after each SIGWINCH has been fully processed. The
test suite enables this mode and then waits for the message in order
to know when control can be returned to the calling test.
This patch also adds a timeout, to avoid the situation where the
terminal code fails to notice a change for some reason. This lets the
test at least try to continue.
gdb/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (resize_message): New global.
(show_tui_resize_message): New function.
(tui_async_resize_screen): Print message if requested.
(_initialize_tui_win): Add tui-resize-message setting.
* NEWS: Add entry for new commands.
gdb/doc/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document new command.
gdb/testsuite/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* lib/tuiterm.exp (_accept): Add wait_for parameter. Check output
after any command. Expect prompt after WAIT_FOR is seen.
(enter_tui): Enable resize messages.
(command): Expect command in output.
(get_line): Avoid error when cursor appears to be off-screen.
(dump_screen): Include screen size in title.
(_do_resize): New proc, from "resize".
(resize): Rewrite. Do resize in two steps.
* gdb.tui/empty.exp (layouts): Fix entries.
(check_boxes): Remove xfail.
(check_text): Dump screen on failure.
Change-Id: I420e0259cb99b21adcd28f671b99161eefa7a51d
|
|
If gdb.lookup_static_symbol is going to return a single symbol then it
makes sense (I think) for it to return a context sensitive choice of
symbol, that is the global static symbol that would be visible to the
program at that point.
However, if the user of the python API wants to instead get a
consistent set of global static symbols, no matter where they stop,
then they have to instead consider all global static symbols with a
given name - there could be many. That is what this new API function
offers, it returns a list (possibly empty) of all global static
symbols matching a given name (and optionally a given symbol domain).
gdb/ChangeLog:
* python/py-symbol.c (gdbpy_lookup_static_symbols): New
function.
* python/python-internal.h (gdbpy_lookup_static_symbols):
Declare new function.
* python/python.c (python_GdbMethods): Add
gdb.lookup_static_symbols method.
* NEWS: Mention gdb.lookup_static_symbols.
gdb/testsuite/ChangeLog:
* gdb.python/py-symbol.exp: Add test for
gdb.lookup_static_symbols.
gdb/doc/ChangeLog:
* python.texi (Symbols In Python): Add documentation for
gdb.lookup_static_symbols.
Change-Id: I1153b0ae5bcbc43b3dcf139043c7a48bf791e1a3
|
|
Here's the patch corresponding to the Solaris 10 obsoletion announcement
https://sourceware.org/ml/gdb/2019-10/msg00008.html
Right now it doesn't remove any code, but obviates the need to test on
that ancient platform. Besides, some of the patches I have in my queue
would require different solutions for Solaris 10 and 11.
There are a few comment-only references that I've kept since they are
still correct as is, even when GDB doesn't support Solaris 10 any
longer. The only code fragment I've left in is support for
/proc/<pid/path/a.out in procfs.c (procfs_target::pid_to_exec_file):
while current Solaris 11 updates provide /proc/<pid>/execname, that
wasn't present in Solaris 11.0 and still isn't in current Illumos and I
didn't want to make live harder for them.
Tested on i386-pc-solaris2.10 (obsolete configuration rejected) and
x86_64-pc-linux-gnu x sparc64-solaris2.10 (likewise)
resp. x86_64-pc-linux-gnu x sparcv9-solaris2.11 (still builds; I'm using
the sparcv9 form for 64-bit SPARC customary on Solaris in the
MAINTAINERS file now).
* NEWS (Changes since GDB 8.3): Document Solaris 10 removal.
* configure.host: Mark *-*-solaris2.10* obsolete.
* configure.tgt: Mark Solaris < 11 obsolete.
* MAINTAINERS (Target Instruction Set Architectures) <sparc>:
Update target triplet.
|
|
This patch adds two new commands "info module functions" and "info
module variables". These commands list all of the functions and
variables grouped by module and then by file.
For example:
(gdb) info module functions
All functions in all modules:
Module "mod1":
File /some/path/gdb/testsuite/gdb.fortran/info-types.f90:
35: void mod1::__copy_mod1_M1t1(Type m1t1, Type m1t1);
25: void mod1::sub_m1_a(integer(kind=4));
31: integer(kind=4) mod1::sub_m1_b(void);
Module "mod2":
File /some/path/gdb/testsuite/gdb.fortran/info-types.f90:
41: void mod2::sub_m2_a(integer(kind=4), logical(kind=4));
49: logical(kind=4) mod2::sub_m2_b(real(kind=4));
The new commands take set of flags that allow the output to be
filtered, the user can filter by variable/function name, type, or
containing module.
As GDB doesn't currently track the relationship between a module and
the variables or functions within it in the symbol table, so I filter
based on the module prefix in order to find the functions or variables
in each module. What this makes clear is that a user could get this
same information using "info variables" and simply provide the prefix
themselves, for example:
(gdb) info module functions -m mod1 _a
All functions matching regular expression "_a",
in all modules matching regular expression "mod1":
Module "mod1":
File /some/path/gdb/testsuite/gdb.fortran/info-types.f90:
25: void mod1::sub_m1_a(integer(kind=4));
Is similar to:
(gdb) info functions mod1::.*_a.*
All functions matching regular expression "mod1::.*_a":
File /some/path/gdb/testsuite/gdb.fortran/info-types.f90:
25: void mod1::sub_m1_a(integer(kind=4));
The benefits I see for a separate command are that the user doesn't
have to think (or know) about the module prefix format, nor worry
about building a proper regexp. The user can also easily scan across
modules without having to build complex regexps.
The new function search_module_symbols is extern in this patch despite
only being used within symtab.c, this is because a later patch in this
series will also be using this function from outside symtab.c.
This patch is a new implementation of an idea originally worked on by
Mark O'Connor, Chris January, David Lecomber, and Xavier Oro from ARM.
gdb/ChangeLog:
* symtab.c (info_module_cmdlist): New variable.
(info_module_command): New function.
(search_module_symbols): New function.
(info_module_subcommand): New function.
(struct info_modules_var_func_options): New struct.
(info_modules_var_func_options_defs): New variable.
(make_info_modules_var_func_options_def_group): New function.
(info_module_functions_command): New function.
(info_module_variables_command): New function.
(info_module_var_func_command_completer): New function.
(_initialize_symtab): Register new 'info module functions' and
'info module variables' commands.
* symtab.h (typedef symbol_search_in_module): New typedef.
(search_module_symbols): Declare new function.
* NEWS: Mention new commands.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new 'info module variables' and
'info module functions' commands.
gdb/testsuite/ChangeLog:
* gdb.fortran/info-modules.exp: Update expected results, and add
additional tests for 'info module functinos', and 'info module
variables'.
* gdb.fortran/info-types.exp: Update expected results.
* gdb.fortran/info-types.f90: Extend testcase with additional
module variables and functions.
Change-Id: I8c2960640e2e101b77eff54027d687e21ec22e2b
|
|
Add a new command 'info modules' that lists all of the modules GDB
knows about from the debug information.
A module is a debugging entity in the DWARF defined with
DW_TAG_module, currently Fortran is known to use this tag for its
modules. I'm not aware of any other language that currently makes use
of DW_TAG_module.
The output style is similar to the 'info type' output:
(gdb) info modules
All defined modules:
File info-types.f90:
16: mod1
24: mod2
(gdb)
Where the user is told the file the module is defined in and, on the
left hand side, the line number at which the module is defined along
with the name of the module.
This patch is a new implementation of an idea originally worked on by
Mark O'Connor, Chris January, David Lecomber, and Xavier Oro from ARM.
gdb/ChangeLog:
* dwarf2read.c (dw2_symtab_iter_next): Handle MODULE_DOMAIN.
(dw2_expand_marked_cus): Handle MODULES_DOMAIN.
(dw2_debug_names_iterator::next): Handle MODULE_DOMAIN and
MODULES_DOMAIN.
(scan_partial_symbols): Only create partial module symbols for non
declarations.
* psymtab.c (recursively_search_psymtabs): Handle MODULE_DOMAIN
and MODULES_DOMAIN.
* symtab.c (search_domain_name): Likewise.
(search_symbols): Likewise.
(print_symbol_info): Likewise.
(symtab_symbol_info): Likewise.
(info_modules_command): New function.
(_initialize_symtab): Register 'info modules' command.
* symtab.h (enum search_domain): Add MODULES_DOMAIN.
* NEWS: Mention new 'info modules' command.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new 'info modules' command.
gdb/testsuite/ChangeLog:
* gdb.fortran/info-modules.exp: New file.
* gdb.fortran/info-types.exp: Build with new file.
* gdb.fortran/info-types.f90: Include and use new module.
* gdb.fortran/info-types-2.f90: New file.
Change-Id: I2b781dd5a06bcad04620ccdc45f01a0f711adfad
|
