| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* remote.h (remote_filename_p, remote_bfd_open): Add prototypes.
* remote.c (remote_bfd_iovec_open, remote_bfd_iovec_close,
remote_bfd_iovec_pread, remote_bfd_iovec_stat, remote_filename_p,
remote_bfd_open): New functions.
(remote_hostio_send_command): Fail safely if remote connection
is not set up.
* solist.h (solib_open): Remove prototype.
(solib_bfd_open): Add prototype.
* solib.c: Include "remote.h".
(solib_open): Remove, replace by ...
(solib_bfd_open): ... this new function. Handle remote BFDs.
(solib_map_sections): Replace solib_open by solib_bfd_open.
* solib-frv.c: Include "exceptions.h".
(enable_break2): Replace solib_open by solib_bfd_open.
* solib-svr4.c: Include "exceptions.h".
(enable_break): Replace solib_open by solib_bfd_open.
* symfile.c: Include "remote.h".
(build_id_verify): Handle remote BFDs.
(separate_debug_file_exists): Use BFD to access file. Handle
remote BFDs.
(symfile_bfd_open): Handle remote BFDs.
(reread_symbols): Handle remote BFDs.
* NEWS: Mention "remote:" argument prefix to "set sysroot".
doc/ChangeLog:
* gdb.texinfo (Commands to Specify Files): Document "remote:"
argument prefix to "set sysroot".
|
|
|
|
corresponding description of treatment of True and false to gdb.texinfo.
|
|
|
|
entry.
|
|
2008-08-12 Sandra Loosemore <sandra@codesourcery.com>
* gdb.texinfo (Remote Configuration): Document set remote noack-packet.
(Remote Protocol): Add Packet Acknowledgment to menu.
(Overview): Mention +/- can be disabled, and point to new section
where this is discussed in detail.
(General Query Packets): Document QStartNoAckMode packet, and
corresponding qSupported reply.
(Packet Acknowledgment): New section.
gdb/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
Add no-ack mode to the remote protocol --- optionally stop ACKing
packets and responses when we have a reliable communication
medium.
Based on Apple's GDB, by Jason Molenda <jmolenda@apple.com>
* remote.c (struct remote_state): Add noack_mode field.
(PACKET_QStartNoAckMode): New.
(remote_start_remote): Don't any outstanding packet here.
(remote_open_1): Clear noack_mode. Ack any outstanding packet
here. Activate noack mode if requested.
(remote_protocol_features): Add QStartNoAckMode.
(remote_open_1):
(putpkt_binary): Don't send ack in noack mode.
(read_frame): Don't recompute the checksum in noack mode.
(getpkt_sane): Skip sending ack if in noack mode.
(_initialize_remote): Add set/show remote noack mode.
* NEWS: Note the new features.
gdb/gdbserver/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
* remote-utils.c (noack_mode, transport_is_reliable): New globals.
(remote_open): Set or clear transport_is_reliable.
(putpkt_binary): Don't expect acks in noack mode.
(getpkt): Don't send ack/nac in noack mode.
* server.c (handle_general_set): Handle QStartNoAckMode.
(handle_query): If connected by tcp pass QStartNoAckMode+ in
qSupported.
(main): Reset noack_mode on every connection.
* server.h (noack_mode): Declare.
|
|
gdb/
2008-08-06 Vladimir Prus <vladimir@codesourcery.com>
Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Doug Evans <dje@google.com>
* Makefile.in (SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS,
SUBDIR_PYTHON_DEPS, SUBDIR_PYTHON_LDFLAGS, SUBDIR_PYTHON_CFLAGS,
PYTHON_CFLAGS): New.
(python_h, python_internal_h): New.
(cli-script.o): Depend on python.h
(python.o, python-utils.o): New.
* cli/cli-script.c (print_command_lines): Handle python_control.
(execute_control_command): Handle python_control.
(execute_control_command_untraced): New function.
(while_command): Call execute_control_command_untraced.
(if_command): Likewise.
(get_command_line): Remove static attribute.
(read_next_line): Handle "python".
(recurse_read_control_structure): Handle python_control.
(read_command_lines): Handle python_control.
Include python.h.
* cli/cli-script.h (get_command_line): Add prototype.
(execute_control_command_untraced): Likewise.
* configure.ac: Add --with-python.
* defs.h (enum command_control_type) <python_control>: New
constant.
* python/python-internal.h: New file.
* python/python.c: New file.
* python/python.h: New file.
* python/python-utils.c: New file.
* NEWS: Mention Python scripting support and its new commands.
gdb/doc/
2008-08-06 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Extending GDB): New chapter.
(Sequences): Demoted chapter, now a section under the new
Extending GDB chapter.
(Python): New section.
gdb/testsuite/
2008-08-06 Tom Tromey <tromey@redhat.com>
* gdb.python/python.exp: New file.
|
|
PR gdb/855:
* NEWS: Add entry for macro commands.
* Makefile.in (macrocmd.o): Add gdb_string.h.
* macroscope.h (user_macro_scope): Declare.
(default_macro_scope): Update documentation.
(macro_user_macros): Declare.
* c-lang.c (c_preprocess_and_parse): Always attempt macro lookup.
Use user_macro_scope.
(null_macro_lookup): Remove.
* macrotab.h (macro_callback_fn): Declare.
(macro_for_each): Likewise.
(macro_allow_redefinitions): Likewise.
* macrotab.c (foreach_macro): New function
(macro_for_each): Likewise.
(struct macro_table) <redef_ok>: New field.
(macro_allow_redefinitions): New function.
(new_macro_table): Update.
(macro_define_function): Likewise.
(macro_define_object): Likewise.
* macroscope.c (user_macro_scope): New function.
(default_macro_scope): Use it.
(macro_user_macros): New global.
(standard_macro_lookup): Look in macro_user_macros.
(_initialize_macroscope): New function.
* macroexp.h (macro_is_whitespace, macro_is_digit,
macro_is_identifier_nondigit): Declare.
* macroexp.c (macro_is_whitespace): Rename. No longer static.
(macro_is_digit): Likewise.
(macro_is_identifier_nondigit): Likewise.
(get_identifier): Update.
(get_pp_number): Likewise.
(get_token): Likewise.
* macrocmd.c (skip_ws): New function.
(extract_identifier): Likewise.
(free_macro_definition_ptr): Likewise.
(user_macros): Remove.
(macro_define_command): Implement.
(_initialize_macrocmd): Update.
(macro_undef_command): Implement.
(print_one_macro): New function.
(macro_list_command): Implement.
gdb/doc
* gdb.texinfo (Macros): Update. Use @code rather than @command.
gdb/testsuite
* gdb.base/macscp.exp: Add macro tests.
|
|
* NEWS: Document new option.
* symfile.h (print_symbol_loading): Declare.
* symfile.c (print_symbol_loading): New global.
(symbol_file_add_with_addrs_or_offsets): Only print "Reading symbols
from ..." if print_symbol_loading.
(_initialize_symfile): Add set/show print symbol-loading.
* solib.c (solib_read_symbols): Only print "Loaded symbols for ..."
if print_symbol_loading.
* doc/gdb.texinfo: Document "set print symbol-loading on|off".
|
|
|
|
* NEWS (New commands): Mention "set disable-randomization".
* configure.ac: Add check for HAVE_PERSONALITY and
HAVE_DECL_ADDR_NO_RANDOMIZE.
* configure, config.in: Regenerate.
* linux-nat.c [HAVE_PERSONALITY]: New include <sys/personality.h>.
[HAVE_PERSONALITY] [!HAVE_DECL_ADDR_NO_RANDOMIZE]: Set
ADDR_NO_RANDOMIZE.
(disable_randomization, show_disable_randomization)
(set_disable_randomization): New.
(linux_nat_create_inferior) [HAVE_PERSONALITY]: New variables
PERSONALITY_ORIG and PERSONALITY_SET. Disable randomization upon the
variable DISABLE_RANDOMIZATION.
(_initialize_linux_nat): Call ADD_SETSHOW_BOOLEAN_CMD for the variable
DISABLE_RANDOMIZATION.
gdb/doc/
* gdb.texinfo (Starting): Document "set disable-randomization".
gdb/testsuite/
* gdb.base/randomize.exp, gdb.base/randomize.c: New files.
|
|
completer for set to filename_completer.
NEWS: Mention it.
|
|
reply packet.
* remote.c (remote_wait): Remove undocumented S AA p PID support.
|
|
of remote packet list.
|
|
* value.h (evaluate_subexpression_type, extract_field_op):
Declare.
* printcmd.c (_initialize_printcmd): Use expression_completer for
'p', 'inspect', 'call'.
* parser-defs.h (parse_field_expression): Declare.
* parse.c: Include exceptions.h.
(in_parse_field, expout_last_struct): New globals.
(mark_struct_expression): New function.
(prefixify_expression): Return int.
(prefixify_subexp): Return int. Use expout_last_struct.
(parse_exp_1): Update.
(parse_exp_in_context): Add 'out_subexp' argument. Handle
in_parse_field.
(parse_field_expression): New function.
* expression.h (parse_field_expression): Declare.
(in_parse_field): Likewise.
* eval.c (evaluate_subexpression_type): New function.
(extract_field_op): Likewise.
* completer.h (expression_completer): Declare.
* completer.c (expression_completer): New function.
(count_struct_fields, add_struct_fields): New functions.
* c-exp.y (yyparse): Redefine.
(COMPLETE): New token.
(exp): New productions.
(saw_name_at_eof, last_was_structop): New globals.
(yylex): Return COMPLETE when needed. Recognize in_parse_field.
(c_parse): New function.
* breakpoint.c (_initialize_breakpoint): Use expression_completer
for watch, awatch, and rwatch.
* Makefile.in (parse.o): Depend on exceptions_h.
gdb/testsuite
* gdb.base/break1.c (struct some_struct): New struct.
(values): New global.
* gdb.base/completion.exp: Add field name completion test.
gdb/doc
* gdb.texinfo (Completion): Add field name example.
|
|
|
|
|
|
* NEWS: Document find command and qSearch:memory packet.
* Makefile.in (SFILES): Add findcmd.c.
(COMMON_OBJS): Add findcmd.o.
(findcmd.o): New rule.
* findcmd.c: New file.
* target.h (target_ops): New member to_search_memory.
(simple_search_memory): Declare.
(target_search_memory): Declare.
* target.c (simple_search_memory): New fn.
(target_search_memory): New fn.
* remote.c (PACKET_qSearch_memory): New packet kind.
(remote_search_memory): New fn.
(init_remote_ops): Init to_search_memory.
(init_extended_remote_ops): Ditto.
(_initialize_remote): Add qSearch:memory packet config command.
* gdbserver/server.h (decode_search_memory_packet): Declare.
* gdbserver/remote-utils.c (decode_search_memory_packet): New fn.
* gdbserver/server.c (handle_search_memory_1): New fn.
(handle_search_memory): New fn.
(handle_query): Process qSearch:memory packets.
* doc/gdb.texinfo: Document "find" command, qSearch:memory packet.
* testsuite/gdb.base/find.exp: New file.
* testsuite/gdb.base/find.c: New file.
|
|
* cli/cli-cmds.c (print_disassembly): New function.
(disassemble_current_function): New function
(disassemble_command): Recognize /m modifier, print mixed
source+assembly.
(init_cli_cmds): Update disassemble help text.
* gdb.texinfo (disassemble): Document /m modifier.
|
|
(arm_force_mode_string, arm_show_fallback_mode)
(arm_show_force_mode): New.
(arm_pc_is_thumb): Honor fallback-mode and force-mode. Use
arm_frame_is_thumb.
(_initialize_arm_tdep): Add "set arm fallback-mode"
and "set arm force-mode".
* NEWS: Document new commands.
* gdb.texinfo (ARM): Document set/show arm fallback-mode
and set/show arm force-mode.
|
|
Pedro Alves <pedro@codesourcery.com>
Based on work by Jan Kratochvil <jan.kratochvil@redhat.com> and Jeff
Johnston <jjohnstn@redhat.com>.
* NEWS: Mention attach to stopped process fix.
* infcmd.c (detach_command, disconnect_command): Discard the thread
list.
* infrun.c (handle_inferior_event): Do not ignore non-SIGSTOP while
attaching. Use signal_stop_state.
(signal_stop_state): Check stop_soon.
* linux-nat.c (kill_lwp): Declare earlier.
(pid_is_stopped, linux_nat_post_attach_wait): New.
(lin_lwp_attach_lwp): Use linux_nat_post_attach_wait. Update
comments.
(linux_nat_attach): Use linux_nat_post_attach_wait.
(detach_callback, linux_nat_detach): Improve handling for signalled
processes.
(linux_nat_pid_to_str): Always print out the LWP ID if it differs
from the process ID.
* Makefile.in (infcmd.o): Update.
2008-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
Daniel Jacobowitz <dan@codesourcery.com>
* gdb.threads/attach-into-signal.c, gdb.threads/attach-into-signal.exp,
gdb.threads/attach-stopped.c, gdb.threads/attach-stopped.exp,
gdb.threads/attachstop-mt.c, gdb.threads/attachstop-mt.exp: New.
|
|
Register a vector of bp_location_p.
* breakpoint.c (always_inserted_mode)
(show_always_inserted_mode): New.
(unlink_locations_from_global_list): Remove.
(update_global_location_list)
(update_global_location_list_nothrow): New.
(update_watchpoint): Don't free locations.
(should_insert_location): New.
(insert_bp_location): Use should_insert_location.
(insert_breakpoint_locations): Copied from
insert_breakpoints.
(insert_breakpoint): Use insert_breakpoint_locations.
(bpstat_stop_status): Call update_global_location_list
when disabling breakpoint.
(allocate_bp_location): Don't add to bp_location_chain.
(set_raw_breakpoint)
(create_longjmp_breakpoint, enable_longjmp_breakpoint)
(disable_longjmp_breakpoint, create_overlay_event_breakpoint)
(enable_overlay_breakpoints, disable_overlay_breakpoints)
(set_longjmp_resume_breakpoint)
(enable_watchpoints_after_interactive_call_stop)
(disable_watchpoints_before_interactive_call_start)
(create_internal_breakpoint)
(create_fork_vfork_event_catchpoint)
(create_exec_event_catchpoint, set_momentary_breakpoint)
(create_breakpoints, break_command_1, watch_command_1)
(create_exception_catchpoint)
(handle_gnu_v3_exceptions)
(disable_breakpoint, breakpoint_re_set_one)
(create_thread_event_breakpoint, create_solib_event_breakpoint)
(create_ada_exception_breakpoint): : Don't call check_duplicates.
Call update_global_location_list.
(delete_breakpoint): Don't remove locations and don't
try to reinsert them. Call update_global_location_list.
(update_breakpoint_locations): Likewise.
(restore_always_inserted_mode): New.
(update_breakpoints_after_exec): Temporary disable
always inserted mode.
* Makefile.in: Update dependencies.
* infrun.c (proceed): Remove breakpoints while stepping
over breakpoint.
(handle_inferior_event): Don't remove or insert
breakpoints.
* linux-fork.c (checkpoint_command): Remove breakpoints
before fork and insert after.
(linux_fork_context): Remove breakpoints before switch
and insert after.
* target.c (target_disconnect, target_detach): Remove
breakpoints from target.
|
|
|
|
--------------
* gdb.texinfo (Set SH Calling convention): New @item.
(Show SH Calling convention): Ditto.
ChangeLog:
----------
* NEWS: Add information on calling convention and new SH CLI options.
* sh-tdep.c (sh_cc_gcc): New static string.
(sh_cc_renesas): Ditto.
(sh_cc_enum): New static string array.
(sh_active_calling_convention): New static string pointer denoting
active user chosen ABI.
(sh_is_renesas_calling_convention): New function to return function
specific ABI, or user choice if necessary.
(sh_use_struct_convention): Rename first argument and turn around its
meaning. Check for renesas ABI and return accordingly.
(sh_use_struct_convention_nofpu): New function.
(sh_next_flt_argreg): Get function type as third parameter. Check
for renesas ABI and choose floating registers accordingly.
(sh_push_dummy_call_fpu): Check for ABI and choose argument slot and
struct return slot accordingly.
(sh_push_dummy_call_nofpu): Ditto.
(sh_return_value_nofpu): Call sh_use_struct_convention_nofpu from here.
Evaluate ABI and give to sh_use_struct_convention_nofpu.
(sh_return_value_fpu): Evaluate ABI and give to
sh_use_struct_convention.
(show_sh_command): New function.
(set_sh_command): Ditto.
(_initialize_sh_tdep): Initialize `set/show sh calling-convention
CLI command.
* gdbarch.sh (return_value): Add func_type argument.
* gdbarch.c: Regenerate.
* gdbarch.h: Ditto.
* eval.c (evaluate_subexp_standard): Rename local variable value_type to
val_type so as not to collide with value_type function. Call
using_struct_return with additional function type argument.
* infcall.c (call_function_by_hand): Call using_struct_return and
gdbarch_return_value with additional function type argument.
* infcmd.c (print_return_value): Take addition func_type argument.
Call gdbarch_return_value with additional function type argument.
(finish_command_continuation): Call print_return_value with additional
function type argument.
(finish_command): Ditto.
* sparc-tdep.c (sparc32_push_dummy_code): Call using_struct_return with
additional function type argument.
* stack.c (return_command): Call using_struct_return and
gdbarch_return_value with additional function type argument.
* value.c (using_struct_return): Take additional function type argument.
* value.h (using_struct_return): Accommodate declaration.
* alpha-tdep.c (alpha_return_value): Add func_type argument.
* amd64-tdep.c (amd64_return_value): Ditto.
* arm-tdep.c (arm_return_value): Ditto.
* avr-tdep.c (avr_return_value): Ditto.
* cris-tdep.c (cris_return_value): Ditto.
* frv-tdep.c (frv_return_value): Ditto.
* h8300-tdep.c (h8300_return_value): Ditto.
(h8300h_return_value): Ditto.
* hppa-tdep.c (hppa32_return_value): Ditto.
(hppa64_return_value): Ditto.
* i386-tdep.c (i386_return_value): Ditto.
* ia64-tdep.c (ia64_return_value): Ditto.
* iq2000-tdep.c (iq2000_return_value): Ditto.
* m32c-tdep.c (m32c_return_value): Ditto.
* m32r-tdep.c (m32r_return_value): Ditto.
* m68hc11-tdep.c (m68hc11_return_value): Ditto.
* m68k-tdep.c (m68k_return_value): Ditto.
(m68k_svr4_return_value): Ditto.
* m88k-tdep.c (m88k_return_value): Ditto.
* mep-tdep.c (mep_return_value): Ditto.
* mips-tdep.c (mips_eabi_return_value): Ditto.
(mips_n32n64_return_value): Ditto.
(mips_o32_return_value): Ditto.
(mips_o64_return_value): Ditto.
* mn10300-tdep.c (mn10300_return_value): Ditto.
* mt-tdep.c (mt_return_value): Ditto.
* ppc-linux-tdep.c (ppc_linux_return_value): Ditto.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Ditto.
(ppc_sysv_abi_broken_return_value): Ditto.
(ppc64_sysv_abi_return_value): Ditto.
* ppc-tdep.h (ppc_sysv_abi_return_value): Ditto.
(ppc_sysv_abi_broken_return_value): Ditto.
(ppc64_sysv_abi_return_value): Ditto.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Ditto.
* rs6000-tdep.c (rs6000_return_value): Ditto.
* s390-tdep.c (s390_return_value): Ditto.
* score-tdep.c (score_return_value): Ditto.
* sh-tdep.c (sh_return_value_nofpu): Ditto.
(sh_return_value_fpu): Ditto.
* sh64-tdep.c (sh64_return_value): Ditto.
* sparc-tdep.c (sparc32_return_value): Ditto.
* sparc64-tdep.c (sparc64_return_value): Ditto.
* spu-tdep.c (spu_return_value): Ditto.
* v850-tdep.c (v850_return_value): Ditto.
* vax-tdep.c (vax_return_value): Ditto.
* xstormy16-tdep.c (xstormy16_return_value): Ditto.
* xtensa-tdep.c (xtensa_return_value): Ditto.
* gdbtypes.h (struct type): Add calling_convention member.
* dwarf2read.c (read_subroutine_type): Add calling convention read
from DW_AT_calling_convention attribute to function type.
|
|
* doc/gdb.texinfo (Requirements): Add an optional requirement
on zlib.
* doc/gdbint.texinfo (Debugging File Formats): Add new
subsection for Compressed DWARF 2.
|
|
|
|
of "library". Add "section" element and describe its attributes.
* solib-target.c (struct lm_info): Add section_bases member.
(library_list_start_segment): Error out if seen a section element.
(library_list_start_section): New.
(library_list_end_library): New.
(solib_target_free_library_list): Free section_bases.
(section_attributes): New.
(library_children): Make "segment" optional. Add "section" child.
(library_list_children): Register library_list_end_library.
(solib_target_relocate_section_addresses): Handle section bases.
* NEWS: Mention new qXfer:libraries:read section offsets support.
doc/
* gdb.texinfo (Library List Format): Update to mention the
possibility to pass section addresses instead of segment
addresses.
|
|
* NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
argument. Gather all gdbserver features together.
* fork-child.c (exec_wrapper): New variable.
(fork_inferior): Use it.
(startup_inferior): Skip an extra trap if using "set exec-wrapper".
(unset_exec_wrapper_command, _initialize_fork_child): New.
* gdb.texinfo (Starting): Document "set exec-wrapper".
(Server): Document gdbserver --wrapper.
* server.c (wrapper_argv): New.
(start_inferior): Handle wrapper_argv. If set, expect an extra
trap.
(gdbserver_usage): Document --wrapper.
(main): Parse --wrapper.
|
|
(update_watchpoint): Set and clear val_valid. Use
fetch_watchpoint_value. Handle unreadable values on the
value chain. Correct check for user-requested array watchpoints.
(breakpoint_init_inferior): Clear val_valid.
(watchpoint_value_print): New function.
(print_it_typical): Use it. Do not free or clear old_val. Print
watchpoints even if old_val == NULL.
(watchpoint_check): Use fetch_watchpoint_value. Check for values
becoming readable or unreadable.
(watch_command_1): Use fetch_watchpoint_value. Set val_valid.
(do_enable_watchpoint): Likewise.
* breakpoint.h (struct breakpoint): Update comment for val. Add
val_valid.
* NEWS: Mention watchpoints on inaccessible memory.
* gdb.base/watchpoint.c (global_ptr, func4): New.
(main): Call func4.
* gdb.base/watchpoint.exp: Call test_inaccessible_watchpoint.
(test_inaccessible_watchpoint): New.
* gdb.texinfo (Set Watchpoints): Mention watchpoints on
unreadable memory. Delete obsolete SPARClite reference.
|
|
(vfprintf_unfiltered): Print timestamps if requested.
(show_debug_timestamp): New.
(initialize_utils): Register "set debug timestamp".
* NEWS: Mention "set debug timestamp". Add GDB 6.8 section.
* gdb.texinfo (Debugging Output): Document "set debug timestamp".
|
|
|
|
|
|
* NEWS (New native configurations): Xtensa GNU/Linux.
(New targets): Xtensa GNU/Linux.
* Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
xtensa-linux-tdep.o
(ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
(xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
* configure.tgt (xtensa*-*-linux*): New entry.
* xtensa-config.c (xtensa_tdep): New variable.
(xtensa_config_byte_order, xtensa_config_tdep): Removed.
(rmap): Change format based on new macro XTREG.
(XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
* xtensa-linux-nat.c: New.
* xtensa-linux-tdep.c: New.
* xtensa-xtregs.c: New.
* xtensa-tdep.h (xtensa_elf_gregset_t): Update.
(XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
(XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
(xtensa_register_t): New field coprocessor.
(XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
* xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write):
Update to handle privileged registers.
(xtensa_supply_gregset) Remove exccause and excvaddr registers.
(xtensa_push_dummy_call): Set windowstart register correctly.
(call0_analyze_prologue): Initialize xtensa_default_isa.
(xtensa_derive_tdep): New.
(xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
Call xtensa_derive_tdep().
* config/xtensa/linux.mh: New.
* regformats/reg-xtensa.dat: New.
|
|
|
|
|
|
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
|
|
* NEWS: Mention exec tracing support.
* inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
exec events.
* infcmd.c (kill_if_already_running, detach_command)
(disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
* infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
(follow_exec): Do not check may_follow_exec. Do not mourn and push
targets. Apply the sysroot path to the loaded executable. Use
no_shared_libraries.
* linux-nat.c (linux_child_follow_fork): Print fork following
messages if verbose.
(kill_wait_callback): Kill again before waiting a second time.
* symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
no_shared_libraries.
* gdb.base/foll-exec.exp: Update header. Skip on remote targets.
Run on GNU/Linux.
(do_exec_tests): Check for systems which do not support catchpoints.
Do not match START.
* gdb.base/foll-fork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_fork_catchpoints): New.
(explicit_fork_child_follow, catch_fork_child_follow)
(tcatch_fork_parent_follow): Update expected messages.
(do_fork_tests): Use check_fork_catchpoints.
* gdb.base/foll-vfork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_vfork_catchpoints): New.
(vfork_parent_follow_to_bp, tcatch_vfork_then_child_follow): Update
expected messages.
(do_vfork_and_exec_tests): Use check_fork_catchpoints.
|
|
* hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
(hppabsd_gregset): Move to ...
(hppabsd_regset_from_core_section): Rename
hppaobsd_regset_from_core_section and move to ...
(hppabsd_find_global_pointer): Update comment.
(hppabsd_init_abi): Make global. Do not register
hppabsd_regset_from_core_section.
(hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
move to ...
(_initialize_hppabsd_tdep): Move to ...
* hppaobsd-tdep.c: ... here. New file.
* hppnbsd-tdep.c: New file.
* hppnbsd-nat.c: New file.
* Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
(ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
(hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
(hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
* configure.host (hppa*-*-netbsd*): New entry.
* configure.tgt (hppa*-*-netbsd*): New entry.
(hppa*-*-openbsd*): Update.
* NEWS (New native configuration): Mention NetBSD/hppa.
(New targets): Mention NetBSD/hppa.
|
|
* NEWS: Mention --pid and --core command line behaviour changes.
gdb/doc/
* gdb.texinfo (File Options): Remove mention of the attempt to
open a core file with the -p option. Don't list -c as a valid
option to attach to a process.
|
|
function bodies.
|
|
(PACKET_vFile_open, PACKET_vFile_pread, PACKET_vFile_pwrite)
(PACKET_vFile_close, PACKET_vFile_unlink): New constants.
(remote_buffer_add_string, remote_buffer_add_bytes)
(remote_buffer_add_int, remote_hostio_parse_result)
(remote_hostio_send_command, remote_hostio_open, remote_hostio_pwrite)
(remote_hostio_pread, remote_hostio_close, remote_hostio_unlink)
(remote_fileio_errno_to_host, remote_hostio_error, fclose_cleanup)
(remote_hostio_close_cleanup, remote_file_put, remote_file_get)
(remote_file_delete, remote_put_command, remote_get_command)
(remote_delete_command, remote_command): New functions.
(_initialize_remote): Register new packets and commands.
* Makefile.in (gdb_fileio_h): New variable.
(remote.o): Update.
(SUBDIR_MI_OBS): Add mi-cmd-target.o.
(SUBDIR_MI_SRCS): Add mi/mi-cmd-target.c.
(mi-cmd-target.o): New rule.
* mi/mi-cmd-target.c: New file.
* mi/mi-cmds.c (mi_cmds): Add target-file-delete, target-file-get,
and target-file-put.
* mi/mi-cmds.h (mi_cmd_target_file_get, mi_cmd_target_file_put)
(mi_cmd_target_file_delete): Declare.
* remote.h (remote_file_put, remote_file_get, remote_file_delete):
Declare.
* NEWS: Describe new file transfer support.
* gdb.texinfo (Debugging Programs with Multiple Processes): Correct
formatting.
(Remote Debugging): Add File Transfer section.
(Remote Configuration): Document Host I/O packets.
(GDB/MI): Add GDB/MI File Transfer Commands section.
(Remote Protocol): Add Host I/O Packets section.
(Packets): Add vFile.
* Makefile.in (OBS): Add hostio.o.
(hostio.o): New rule.
* server.h (handle_vFile): Declare.
* hostio.c: New file.
* server.c (handle_v_requests): Take packet_len and new_packet_len
for binary packets. Call handle_vFile.
(main): Update call to handle_v_requests.
* gdb.server/file-transfer.exp, gdb.server/transfer.txt,
gdb.mi/mi-file-transfer.exp: New.
|
|
Collect gdb_target_obs of multiple targets into TARGET_OBS.
Call configure.tgt multiple times, using $targ as operand.
* configure.tgt: Operate on $targ instead of $target.
* configure: Regenerate.
* Makefile.in (ALL_TARGET_OBS): Define.
* NEWS: Mention --enable-targets option.
|
|
|
|
|
|
|
|
|
|
|
|
* ppc-tdep.h: Remove ppc_spr constants.
(struct gdbarch_tdep): Remove regs, ppc_sr0_regnum, and
ppc_builtin_type_vec128 members.
(PPC_R0_REGNUM, PPC_F0_REGNUM, PPC_PC_REGNUM, PPC_MSR_REGNUM)
(PPC_CR_REGNUM, PPC_LR_REGNUM, PPC_CTR_REGNUM, PPC_XER_REGNUM)
(PPC_FPSCR_REGNUM, PPC_MQ_REGNUM, PPC_SPE_UPPER_GP0_REGNUM)
(PPC_SPE_ACC_REGNUM, PPC_SPE_FSCR_REGNUM, PPC_VR0_REGNUM)
(PPC_VSCR_REGNUM, PPC_VRSAVE_REGNUM, PPC_NUM_REGS): New constants.
* rs6000-tdep.c: Include preparsed descriptions.
(init_sim_regno_table): Do not iterate over pseudo registers.
Look up segment registers by name. Use sim_spr_register_name
for SPRs.
(rs6000_register_sim_regno): Call init_sim_regno_table here.
(rs6000_builtin_type_vec128): Delete.
(rs6000_register_name): Only handle SPE pseudo registers and upper
halves. Call tdesc_register_name for everything else.
(rs6000_register_type): Delete. Replace with...
(rs6000_pseudo_register_type): ...this new function. Only handle
SPE pseudo registers.
(rs6000_register_reggroup_p): Delete. Replace with...
(rs6000_pseudo_register_reggroup_p): ...this new function. Only
handle SPE pseudo registers.
(rs6000_convert_register_p): Use ppc_fp0_regnum instead of
"struct reg".
(rs6000_register_to_value, rs6000_value_to_register): Remove check
of reg->fpr.
(e500_register_reggroup_p): Delete.
(STR, R, R4, R8, R16, F, P8, R32, R64, R0, A4, S, S4, SN4, S64)
(COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_UISA_NOFP_SPRS)
(PPC_SEGMENT_REGS, PPC_OEA_SPRS, PPC_ALTIVEC_REGS, PPC_SPE_GP_REGS)
(PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): Delete macros.
(registers_powerpc, registers_403, registers_403GC, registers_505)
(registers_860, registers_601, registers_602, registers_603)
(registers_604, registers_750, registers_7400, registers_e500): Delete
variables.
(struct variant): Delete nregs, npregs, num_tot_regs, and regs. Add
tdesc.
(tot_num_registers, num_registers, num_pseudo_registers): Delete.
(variants): Delete outdated comment. Use standard target descriptions
instead of "struct reg" arrays.
(init_variants): Delete.
(rs6000_gdbarch_init): Do not guess word size from the BFD
architecture if we have a target description. Select a variant
before creating a new architecture. Use the variant's target
description if the target did not define a register layout.
Validate target-supplied registers. Reject mismatches. Use
fixed register numbers and new constants instead of magic
numbers. Call set_gdbarch_ps_regnum. Call tdesc_use_registers.
(_initialize_rs6000_tdep): Initialize the preparsed target
descriptions.
* target-descriptions.c (tdesc_predefined_types): Add int128 and
uint128.
(tdesc_find_register_early): New function.
(tdesc_numbered_register): Use it.
(tdesc_register_size): New function.
(tdesc_use_registers): Take a target_desc argument. Do not use
gdbarch_target_desc.
* target-descriptions.h (tdesc_use_registers): Update prototype
and comment.
(tdesc_register_size): New prototype.
* Makefile.in (powerpc_32_c, powerpc_403_c, powerpc_403gc_c)
(powerpc_505_c, powerpc_601_c, powerpc_602_c, powerpc_603_c)
(powerpc_604_c, powerpc_64_c, powerpc_7400_c, powerpc_750_c)
(powerpc_860_c, powerpc_e500_c, rs6000_c): New macros.
(rs6000-tdep.o): Update.
* arm-tdep.c (arm_gdbarch_init): Update call to tdesc_use_registers.
* m68k-tdep.c (m68k_gdbarch_init): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* gdb.texinfo (Predefined Target Types): Add int128
and uint128.
(Standard Target Features): Add PowerPC features.
* gdb.xml/tdesc-regs.exp: Add PowerPC support.
* sim-ppc.h (sim_spr_register_name): New prototype.
* gdb-sim.c (regnum2spr): Rename to...
(sim_spr_register_name): ... this. Make global.
|
|
news. Mention XML support for M68K in GDB 6.7.
|
|
support for breakpoints at multiple locations.
* gdb.texinfo (Setting Breakpoints): Revise
documentation for pending breakpoints. Document
breakpoints with multiple locations.
|
