aboutsummaryrefslogtreecommitdiff
path: root/gdb/NEWS
AgeCommit message (Collapse)AuthorFilesLines
2015-05-27Add set/show debug dwarf-line.Doug Evans1-0/+4
gdb/ChangeLog: * NEWS: Mention "set debug dwarf-line". * dwarf2read.c (dwarf_line_debug): New static global. (add_include_dir): Add debug dwarf-line support. (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto. (_initialize_dwarf2_read): New parameter "debug dwarf-line". gdb/doc/ChangeLog: * gdb.texinfo (Debugging Output): Mention set/show debug dwarf-line.
2015-05-26Rename dwarf2 to dwarf in "set debug" and maintenance commands.Doug Evans1-0/+20
gdb/ChangeLog: * NEWS: Add entries for command renamings. * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug. All uses updated. (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated. (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age. All uses updated. (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age. All callers updated. Fix spelling of DWARF in help text. (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist. All uses updated. (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist. All uses updated. (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated. (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated. (dwarf_always_disassemble): Renamed from dwarf_always_disassemble. All uses updated. (show_dwarf_always_disassemble): Renamed from show_dwarf2_always_disassemble. All callers updated. (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to "set/show dwarf max-cache-age". Rename "set/show dwarf2 always-disassemble" to "set/show dwarf always-disassemble". Rename "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename "set/show debug dwarf2-die" to "set/show debug dwarf-die". gdb/doc/ChangeLog: * gdb.texinfo (Debugging Output): Update for DWARF "set debug" command renamings. (Maintenance Commands): Update for DWARF "set debug" command renamings. gdb/testsuite/ChangeLog: * gdb.dwarf2/dw2-op-call.exp: Update. * gdb.dwarf2/dw4-sig-types.exp: Update. * gdb.dwarf2/implptr.exp: Update. * gdb.mi/mi-cmd-param-changed.exp: Update.
2015-05-26NEWS entry about aarch64-linux record/replay supportOmair Javaid1-0/+4
This patch adds the NEWS entry for aarch64-linux record replay support. It has been reviewed and approved. gdb: 2015-05-26 Omair Javaid <omair.javaid@linaro.org> * NEWS: Add a note on process record-replay support on aarch64*-linux* targets.
2015-05-22gdb: New 'tui enable' and 'tui disable' commands.Andrew Burgess1-0/+4
Add new commands to specifically enable and disable tui mode. This is in addition to the readline bindings, but might be easier for a user to discover if they accidentally end up in tui mode. gdb/ChangeLog: * NEWS: Mention 'tui enable' and 'tui disable'. * tui/tui.c (tui_enable_command): New function. (tui_disable_command): New function. (_initialize_tui): New function. gdb/doc/ChangeLog: * gdb.texinfo (TUI): Include 'tui enable' in the introduction. (TUI Commands): Add 'tui enable' and 'tui disable' details.
2015-05-16Add support for unbuffered and zero sized Guile ports.Doug Evans1-0/+4
gdb/ChangeLog * NEWS: Mention support for unbuffered Guile memory ports. * scm-ports.c (ioscm_memory_port): Update comments on end, size. (ioscm_lseek_address): Improve overflow calculation. (gdbscm_memory_port_fill_input): Add assert. (gdbscm_memory_port_write): Handle unbuffered ports. Handle large writes identical to Guile's fport_write. (gdbscm_memory_port_seek): Fix seeking past end check. (gdbscm_memory_port_close): Handle closing unbuffered port. (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports. (ioscm_init_memory_port): Handle unbuffered ports. (ioscm_reinit_memory_port): Ditto. (ioscm_init_memory_port): Update size calculation. (gdbscm_open_memory): Support zero sized ports. gdb/testsuite/ChangeLog * gdb.guile/scm-ports.c: New file. * gdb.guile/scm-ports.exp: Add memory port tests. gdb/doc/ChangeLog * guile.texi (Memory Ports in Guile): Document support for unbuffered memory ports.
2015-05-16compile: New 'compile print'Jan Kratochvil1-0/+3
It is planned the existing GDB command 'print' will be able to evaluate its expressions using the compiler. There will be some option to choose between the existing GDB evaluation and the compiler evaluation. But as an intermediate step this patch provides the expression printing feature as a new command. I can imagine it could be also called 'maintenance compile print' as in the future one should be able to use its functionality by the normal 'print' command. There was a discussion with Eli about the command name: https://sourceware.org/ml/gdb-patches/2015-03/msg00880.html As there were no other comments yet I haven't renamed it yet, before there is some confirmation about settlement on the final name. Support for the GDB '@' operator to create arrays has been submitted for GCC: [gcc patch] libcc1: '@' GDB array operator https://gcc.gnu.org/ml/gcc-patches/2015-03/msg01451.html gdb/ChangeLog 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com> Phil Muldoon <pmuldoon@redhat.com> * NEWS (Changes since GDB 7.9): Add compile print. * compile/compile-c-support.c (add_code_header, add_code_footer) (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE. * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE) (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE): New. * compile/compile-object-load.c: Include block.h. (get_out_value_type): New function. (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and OUT_VALUE_TYPE. * compile/compile-object-load.h (struct compile_module): Add fields out_value_addr and out_value_type. * compile/compile-object-run.c: Include valprint.h and compile.h. (struct do_module_cleanup): Add fields out_value_addr and out_value_type. (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE. (compile_object_run): Propagate out_value_addr and out_value_type. Pass OUT_VALUE_ADDR. * compile/compile.c: Include valprint.h. (compile_print_value, compile_print_command): New functions. (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE. (_initialize_compile): Update compile code help text. Install compile_print_command. * compile/compile.h (compile_print_value): New prototype. * defs.h (enum compile_i_scope_types): Add COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE. gdb/doc/ChangeLog 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.texinfo (Compiling and Injecting Code): Add compile print. gdb/testsuite/ChangeLog 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.compile/compile-print.c: New file. * gdb.compile/compile-print.exp: New file.
2015-05-13gdb/NEWS: Move "Xmethods can now specify a result type" to GDB 7.9.1 section.Joel Brobecker1-1/+6
As this change was ported to GDB 7.9.1, the NEWS entry is moved to a newly-created "Changes in GDB 7.9.1" section, matching the NEWS file which is going to be distributed with the GDB 7.9.1 release. gdb/ChangeLog: * NEWS: Create "Changes in GDB 7.9.1" section. Move news about Xmethods now being able to specify a result type to that new section.
2015-05-12Extended-remote fork event docsDon Breazeal1-0/+24
This patch contains the accumulated documentation changes for the rest of the extended-remote follow fork patchset. gdb/ChangeLog: * NEWS: Announce fork support in the RSP and support for fork debugging in extended mode. gdb/doc/ChangeLog: * gdb.texinfo (Forks): Note that fork debugging is supported in extended mode. (Remote Configuration): Add fork event features to table of packet settings. (Stop Reply Packets): Add fork events to list of stop reasons. (General Query Packets): Add fork events to tables of 'gdbfeatures' and 'stub features' supported in the qSupported packet, as well as to the list containing stub feature details.
2015-05-09[Python] Add methods reference_value and const_value to gdb.Value.Siva Chandra1-0/+3
gdb/ChangeLog: * NEWS (Python Scripting): Mention the new gdb.Value methods. * python/py-value.c (valpy_reference_value): New function. (valpy_const_value): Likewise. (value_object_methods): Add new methods. * value.c (make_cv_value): New function. * value.h (make_cv_value): Declare. gdb/doc/ChangeLog: * python.texi (Values From Inferior): Add descriptions of new methods gdb.Value.reference_value and gdb.Value.const_value. gdb/testsuite/ChangeLog: * gdb.python/py-xmethods.cc: Enhance test case. * gdb.python/py-xmethods.exp: New tests. * gdb.python/py-xmethods.py (A_indexoper): New xmethod worker function. (B_indexoper): Likewise. (global_dm_list) : Add new xmethod worker functions.
2015-05-06Make the "info dll" command available on all platform.Joel Brobecker1-0/+3
The "info dll", an alias of the "info sharedlibrary" command, is currently only defined in windows native versions. This patch makes it universally available by moving the alias declaration to solib.c, and adjusts the documentation accordingly. Making it universally available has two benefits: - Windows users moving to a Unix platforms are still able to use the same command for getting the list of shared libraries; - Unix to Windows cross debuggers now provide that command also. gdb/ChangeLog: * solib.c (_initialize_solib): Add "info dll" alias creation. * windows-nat.c (set_windows_aliases): Delete. (_initialize_windows_nat): Remove deprecated_init_ui_hook assignment. * NEWS: Add news entry about "info dll" now being available on all platforms. gdb/doc/ChangeLog: * gdb.texinfo (Files): Add "info dll" documentation. (Cygwin Native): Remove "info dll" documentation.
2015-04-29PR python/18285Doug Evans1-1/+1
gdb/ChangeLog: PR python/18285 * NEWS: Document new gdb.XMethodWorker.get_result_type method. * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle EVAL_AVOID_SIDE_EFFECTS for xmethods. * extension-priv.h (struct extension_language_ops) <get_xmethod_result_type>: New member. * extension.c (get_xmethod_result_type): New function. * extension.h (get_xmethod_result_type): Declare. * python/py-xmethods.c (get_result_type_method_name): New static global. (py_get_result_type_method_name): Ditto. (gdbpy_get_xmethod_result_type): New function. (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name. * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare. * python/python.c (python_extension_ops): Add gdbpy_get_xmethod_result_type. * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type. * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for xmethods. (value_x_unop): Ditto. * value.c (result_type_of_xmethod): New function. * value.h (result_type_of_xmethod): Declare. gdb/testsuite/ChangeLog: * gdb.python/py-xmethods.exp: Add ptype tests. * gdb.python/py-xmethods.py (E_method_char_worker): Add get_result_type method. gdb/doc/ChangeLog: * python.texi (Xmethod API) <gdb.XMethodWorker.get_result_type>: Document. (Writing an Xmethod): Add get_result_type to example.
2015-04-28Add gdb.Type.optimized_out method.Sasha Smundak1-0/+2
gdb/ChangeLog: * NEWS: Mention gdb.Type.optimized_out method. * python/py-type.c (typy_optimized_out): New function. gdb/doc/ChangeLog: * python.texi: New method documented. gdb/testsuite/ChangeLog: * gdb.python/py-type.exp: New test.
2015-04-27S390: Vector ABI supportAndreas Arnez1-0/+2
With the S390 vector ABI, vector registers are used for passing vector arguments and for returning a vector. Support this ABI in inferior function calls and when setting or retrieving a function's return value. gdb/ChangeLog: * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h". (enum s390_vector_abi_kind): New enum. (struct gdbarch_tdep)<vector_abi>: New field. (s390_effective_inner_type): Add parameter min_size. Stop unwrapping if the inner type is smaller than min_size. (s390_function_arg_float): Adjust call to s390_effective_inner_type. (s390_function_arg_vector): New function. (s390_function_arg_integer): Adjust comment. (struct s390_arg_state)<vr>: New field. (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector arguments according to vector ABI when appropriate. (s390_push_dummy_call): Initialize the argument state's field 'vr'. Adjust calls to s390_handle_arg. (s390_register_return_value): Handle vector return values. (s390_return_value): Apply the "register" return value convention to a vector when appropriate. (s390_gdbarch_init): Initialize tdep->vector_abi. * NEWS: Announce S390 vector ABI support.
2015-04-24gdb: Add support for dumping to verilog hex format.Andrew Burgess1-0/+2
Extend the gdb 'dump' command to allow creating output in verilog hex format. Add some tests to cover new functionality. As bfd does not currently support reading in verilog hex formats the tests only cover the 'dump' command, not the 'restore' command. gdb/ChangeLog: * cli/cli-dump.c (verilog_cmdlist): New variable. (dump_verilog_memory): New function. (dump_verilog_value): New function. (verilog_dump_command): New function. (_initialize_cli_dump): Add new commands to support verilog dump format. * NEWS: Add entry for "dump verilog". gdb/doc/ChangeLog: * gdb.texinfo (Dump/Restore Files): Add detail about verilog dump format. gdb/testsuite/ChangeLog: * gdb.base/dump.exp: Add *.verilog files to all_files list. Add new tests for verilog output.
2015-04-17Access executable from remote system when first inferior appearsGary Benson1-0/+6
This commit modifies remote_add_inferior to take an extra argument try_open_exec. If this is nonzero, remote_add_inferior will attempt to open this inferior's executable as the main executable if no main executable is open already. Callers are updated appropriately. With this commit, remote debugging can now be initiated using only a "target remote" or "target extended-remote" command; no "set sysroot" or "file" commands are required, e.g. bash$ gdb -q (gdb) target remote | gdbserver - /bin/sh Remote debugging using | gdbserver - /bin/sh Process /bin/sh created; pid = 32166 stdin/stdout redirected Remote debugging using stdio Reading symbols from target:/bin/bash... One testcase required updating as a result of this commit. The test checked that GDB's "info files" command does not crash if no main executable is open, and relied on GDB's inability to access the main executable over the remote protocol. The test was updated to inhibit this new behavior. gdb/ChangeLog: * remote.c (remote_add_inferior): New argument try_open_exec. If nonzero, attempt to open the inferior's executable file as the main executable if no main executable is open already. All callers updated. * NEWS: Mention that GDB now supports automatic location and retrieval of executable + files from remote targets. gdb/doc/ChangeLog: * gdb.texinfo (Connecting to a Remote Target): Mention that GDB can access program files from remote targets that support qXfer:exec-file:read and Host I/O packets. gdb/testsuite/ChangeLog: * gdb.server/server-exec-info.exp: Inhibit GDB from accessing the main executable over the remote protocol.
2015-04-17Implement remote_pid_to_exec_file using qXfer:exec-file:readGary Benson1-0/+4
This commit adds a new packet "qXfer:exec-file:read" to the remote protocol that can be used to obtain the pathname of the file that was executed to create a process on the remote system. Support for this packet is added to GDB and remote_ops.to_pid_to_exec_file is implemented using it. gdb/ChangeLog: * target.h (TARGET_OBJECT_EXEC_FILE): New enum value. * remote.c (PACKET_qXfer_exec_file): Likewise. (remote_protocol_features): Register the "qXfer:exec-file:read" feature. (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE. (remote_pid_to_exec_file): New function. (init_remote_ops): Initialize to_pid_to_exec_file. (_initialize_remote): Register new "set/show remote pid-to-exec-file-packet" command. * NEWS: Announce new qXfer:exec-file:read packet. gdb/doc/ChangeLog: * gdb.texinfo (Remote Configuration): Document the "set/show remote pid-to-exec-file-packet" command. (General Query Packets): Document the qXfer:exec-file:read qSupported features. Document the qXfer:exec-file:read packet.
2015-04-17Use gdb_sysroot for main executable on attachGary Benson1-0/+5
This commit updates exec_file_locate_attach to use exec_file_find to compute the full pathname of the main executable in some cases. The net effect of this is that the main executable's path will be prefixed with gdb_sysroot in the same way that shared library paths currently are. gdb/ChangeLog: * exec.c (solist.h): New include. (exec_file_locate_attach): Prefix absolute executable paths with gdb_sysroot if set. * NEWS: Mention that executable paths may be prepended with sysroot. gdb/doc/ChangeLog: * gdb.texinfo (set sysroot): Document that "set sysroot" also applies to executable paths if supplied to GDB as absolute.
2015-04-11Remove --xdbJan Kratochvil1-0/+4
Pedro Alves: The commands that enables aren't even documented in the manual. Judging from that, I assume that only wdb users would ever really be using the --xdb switch. I think it's time to drop "support" for the --xdb switch too. I looked through the commands that that exposes, the only that looked potentially interesting was "go", but then it's just an alias for "tbreak+jump", which can easily be done with "define go...end". I'd rather free up the "go" name for something potentially more interesting (either run control, or maybe even unrelated, e.g., for golang). gdb/ChangeLog 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com> * NEWS (Changes since GDB 7.9): Add removed -xdb. * breakpoint.c (command_line_is_silent): Remove xdb_commands conditional. (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba and lb. * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and va. * cli/cli-decode.c (find_command_name_length): Remove xdb_commands conditional. * defs.h (xdb_commands): Remove declaration. * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc. * guile/scm-cmd.c (command_classes): Remove xdb from comment. * infcmd.c (run_no_args_command, go_command): Remove. (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr. * infrun.c (xdb_handle_command): Remove. (_initialize_infrun): Remove xdb_commands for lz and z. * main.c (xdb_commands): Remove variable. (captured_main): Remove "xdb" from long_options. (print_gdb_help): Remove --xdb from help. * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment. * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?. * stack.c (backtrace_full_command, args_plus_locals_info) (current_frame_command): Remove. (_initialize_stack): Remove xdb_commands for t, T and l. * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg. * thread.c (_initialize_thread): Remove xdb_commands condition. * tui/tui-layout.c (tui_toggle_layout_command) (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove. (_initialize_tui_layout): Remove xdb_commands for td and ts. * tui/tui-regs.c (tui_scroll_regs_forward_command) (tui_scroll_regs_backward_command): Remove. (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r. * tui/tui-win.c (tui_xdb_set_win_height_command): Remove. (_initialize_tui_win): Remove xdb_commands for U and w. * utils.c (pagination_on_command, pagination_off_command): Remove. (initialize_utils): Remove xdb_commands for am and sm. gdb/doc/ChangeLog 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.texinfo (Mode Options): Remove -xdb.
2015-04-02Document "target:" sysroot changesGary Benson1-0/+7
This commit documents the newly added "target:" sysroot feature. gdb/ChangeLog: * NEWS: Announce the new default sysroot of "target:". gdb/doc/ChangeLog: * gdb.texinfo (set sysroot): Document "target:".
2015-04-01Add support for writing unwinders in Python.Sasha Smundak1-0/+1
gdb/ChangeLog: * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o. (SUBDIR_PYTHON_SRCS): Add py-unwind.c. (py-unwind.o): New recipe. * NEWS: mention Python frame unwinding. * data-directory/Makefile.in (PYTHON_FILE_LIST): Add gdb/unwinder.py and gdb/command/unwinder.py * python/lib/gdb/__init__.py (packages): Add frame_unwinders list. (execute_unwinders): New function. * python/lib/gdb/command/unwinders.py: New file. * python/lib/gdb/unwinder.py: New file. * python/py-objfile.c (objfile_object): Add frame_unwinders field. (objfpy_dealloc): Decrement frame_unwinders reference count. (objfpy_initialize): Create frame_unwinders list. (objfpy_get_frame_unwinders): New function. (objfpy_set_frame_unwinders): Ditto. (objfile_getset): Add frame_unwinders attribute to Objfile. * python/py-progspace.c (pspace_object): Add frame_unwinders field. (pspy_dealloc): Decrement frame_unwinders reference count. (pspy_initialize): Create frame_unwinders list. (pspy_get_frame_unwinders): New function. (pspy_set_frame_unwinders): Ditto. (pspy_getset): Add frame_unwinders attribute to gdb.Progspace. * python/py-unwind.c: New file. * python/python-internal.h (pspy_get_name_unwinders): New prototype. (objpy_get_frame_unwinders): New prototype. (gdbpy_initialize_unwind): New prototype. * python/python.c (gdbpy_apply_type_printers): Call gdbpy_initialize_unwind. gdb/doc/ChangeLog: * doc/python.texi (Writing a Frame Unwinder in Python): Add section. gdb/testsuite/ChangeLog: * gdb.python/py-unwind-maint.c: New file. * gdb.python/py-unwind-maint.exp: New test. * gdb.python/py-unwind-maint.py: New file. * gdb.python/py-unwind.c: New file. * gdb.python/py-unwind.exp: New test. * gdb.python/py-unwind.py: New test.
2015-03-31Implement support for checking /proc/PID/coredump_filterSergio Durigan Junior1-0/+9
This patch, as the subject says, extends GDB so that it is able to use the contents of the file /proc/PID/coredump_filter when generating a corefile. This file contains a bit mask that is a representation of the different types of memory mappings in the Linux kernel; the user can choose to dump or not dump a certain type of memory mapping by enabling/disabling the respective bit in the bit mask. Currently, here is what is supported: bit 0 Dump anonymous private mappings. bit 1 Dump anonymous shared mappings. bit 2 Dump file-backed private mappings. bit 3 Dump file-backed shared mappings. bit 4 (since Linux 2.6.24) Dump ELF headers. bit 5 (since Linux 2.6.28) Dump private huge pages. bit 6 (since Linux 2.6.28) Dump shared huge pages. (This table has been taken from core(5), but you can also read about it on Documentation/filesystems/proc.txt inside the Linux kernel source tree). The default value for this file, used by the Linux kernel, is 0x33, which means that bits 0, 1, 4 and 5 are enabled. This is also the default for GDB implemented in this patch, FWIW. Well, reading the file is obviously trivial. The hard part, mind you, is how to determine the types of the memory mappings. For that, I extended the code of gdb/linux-tdep.c:linux_find_memory_regions_full and made it rely *much more* on the information gathered from /proc/<PID>/smaps. This file contains a "verbose dump" of the inferior's memory mappings, and we were not using as much information as we could from it. If you want to read more about this file, take a look at the proc(5) manpage (I will also write a blog post soon about everything I had to learn to get this patch done, and when I it is ready I will post it here). With Oleg Nesterov's help, we could improve the current algorithm for determining whether a memory mapping is anonymous/file-backed, private/shared. GDB now also respects the MADV_DONTDUMP flag and does not dump the memory mapping marked as so, and will always dump "[vsyscall]" or "[vdso]" mappings (just like the Linux kernel). In a nutshell, what the new code is doing is: - If the mapping is associated to a file whose name ends with " (deleted)", or if the file is "/dev/zero", or if it is "/SYSV%08x" (shared memory), or if there is no file associated with it, or if the AnonHugePages: or the Anonymous: fields in the /proc/PID/smaps have contents, then GDB considers this mapping to be anonymous. There is a special case in this, though: if the memory mapping is a file-backed one, but *also* contains "Anonymous:" or "AnonHugePages:" pages, then GDB considers this mapping to be *both* anonymous and file-backed, just like the Linux kernel does. What that means is simple: this mapping will be dumped if the user requested anonymous mappings *or* if the user requested file-backed mappings to be present in the corefile. It is worth mentioning that, from all those checks described above, the most fragile is the one to see if the file name ends with " (deleted)". This does not necessarily mean that the mapping is anonymous, because the deleted file associated with the mapping may have been a hard link to another file, for example. The Linux kernel checks to see if "i_nlink == 0", but GDB cannot easily do this check (as it has been discussed, GDB would need to run as root, and would need to check the contents of the /proc/PID/map_files/ directory in order to determine whether the deleted was a hardlink or not). Therefore, we made a compromise here, and we assume that if the file name ends with " (deleted)", then the mapping is indeed anonymous. FWIW, this is something the Linux kernel could do better: expose this information in a more direct way. - If we see the flag "sh" in the VmFlags: field (in /proc/PID/smaps), then certainly the memory mapping is shared (VM_SHARED). If we have access to the VmFlags, and we don't see the "sh" there, then certainly the mapping is private. However, older Linux kernels (see the code for more details) do not have the VmFlags field; in that case, we use another heuristic: if we see 'p' in the permission flags, then we assume that the mapping is private, even though the presence of the 's' flag there would mean VM_MAYSHARE, which means the mapping could still be private. This should work OK enough, however. Finally, it is worth mentioning that I added a new command, 'set use-coredump-filter on/off'. When it is 'on', it will read the coredump_filter' file (if it exists) and use its value; otherwise, it will use the default value mentioned above (0x33) to decide which memory mappings to dump. gdb/ChangeLog: 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Oleg Nesterov <oleg@redhat.com> PR corefiles/16092 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'. New enum identifying the various options of the coredump_filter file. (struct smaps_vmflags): New struct. (use_coredump_filter): New variable. (decode_vmflags): New function. (mapping_is_anonymous_p): Likewise. (dump_mapping_p): Likewise. (linux_find_memory_regions_full): New variables 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'. Removed variable 'modified'. Read /proc/<PID>/smaps file; improve parsing of its information. Implement memory mapping filtering based on its contents. (show_use_coredump_filter): New function. (_initialize_linux_tdep): New command 'set use-coredump-filter'. * NEWS: Mention the possibility of using the '/proc/PID/coredump_filter' file when generating a corefile. Mention new command 'set use-coredump-filter'. gdb/doc/ChangeLog: 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com> PR corefiles/16092 * gdb.texinfo (gcore): Mention new command 'set use-coredump-filter'. (set use-coredump-filter): Document new command. gdb/testsuite/ChangeLog: 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com> PR corefiles/16092 * gdb.base/coredump-filter.c: New file. * gdb.base/coredump-filter.exp: Likewise.
2015-03-31Add cpu information to the info os command on linux.Antoine Tremblay1-0/+4
This patch adds cpu information on linux based on /proc/cpuinfo as : cpus Listing of all cpus/cores on the system This patch also reorders the info os commands so that they are listed in alphabetical order. gdb/ChangeLog: * NEWS: Mention info os cpus support. * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function. (struct osdata_type): Add cpus entry, reorder the entries in alphabetical order. gdb/doc/ChangeLog: * gdb.texinfo (Operating System Auxiliary Information): Add info os cpus documentation, reorder the info os entries in alphabetical order.
2015-03-23GDB: Add set/show serial parity command.Yury Grechishchev1-0/+4
The "set serial parity" command allows the user to control which parity to use when communicating over a serial connection, rather than having the parity hardcoded to none. gdb/ChangeLog: * NEWS: Mention set/show serial parity command. * monitor.c (monitor_open): Call serial_setparity. * remote.c (remote_open_1): Likewise. * ser-base.c (ser_base_serparity): New function. * ser-base.h (ser_base_setparity): Add declaration. * ser-go32.c (dos_ops): Set "setparity" field. * ser-mingw.c (ser_windows_raw): Do not set state.fParity and state.Parity. (ser_windows_setparity): New function. (hardwire_ops): Add ser_windows_setparity. (tty_ops): Add NULL for setparity field. (pipe_ops): Add ser_base_setparity. (tcp_ops): Likewise. * ser-pipe.c (pipe_ops): Likewise. * ser-tcp.c (tcp_ops): Likewise. * ser-unix.c (hardwire_setparity): Add declaration. (hardwire_raw): Don't reset PARENB flag. (hardwire_setparity): New function. (hardwire_ops): Add hardwire_setparity. * serial.c (serial_setparity): New function. (serial_parity): New global. (parity_none, parity_odd, parity_even, parity_enums, parity): New static globals. (set_parity): New function. (_initialize_serial): Add set/show serial parity commands. * serial.h (GDBPARITY_NONE): Define. (GDBPARITY_ODD): Define. (GDBPARITY_EVEN): Define. (serial_setparity) Add declaration. (struct serial_ops): Add setparity field. * target.h (serial_parity): Add declaration. gdb/doc/ChangeLog: * gdb.texinfo (Remote configuration): Document "set/show serial parity" command.
2015-03-14NEWS: Remove HPUXJan Kratochvil1-0/+5
gdb/ChangeLog 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * NEWS: New Removed targets and native configurations.
2015-03-11Implement remote_bfd_iovec_statGary Benson1-0/+3
This commit adds a new packet "vFile:fstat:" to the remote protocol that can be used by to retrieve information about files that have been previously opened using vFile:open. vFile:fstat: support is added to GDB, and remote_bfd_iovec_stat is implemented using it. If vFile:fstat: is not supported by the remote GDB creates a dummy result by zeroing the supplied stat structure and setting its st_size field to INT_MAX. This mimics GDB's previous behaviour, with the exception that GDB did not previously zero the structure so all other fields would have been returned unchanged, which is to say very likely populated with random values from the stack. gdb/ChangeLog: * remote-fileio.h (remote_fileio_to_host_stat): New declaration. * remote-fileio.c (remote_fileio_to_host_uint): New function. (remote_fileio_to_host_ulong): Likewise. (remote_fileio_to_host_mode): Likewise. (remote_fileio_to_host_time): Likewise. (remote_fileio_to_host_stat): Likewise. * remote.c (PACKET_vFile_fstat): New enum value. (remote_protocol_features): Register the "vFile:fstat" feature. (remote_hostio_fstat): New function. (remote_bfd_iovec_stat): Use the above. (_initialize_remote): Register new "set/show remote hostio-fstat-packet" command. * symfile.c (separate_debug_file_exists): Update comment. * NEWS: Announce new vFile:fstat packet. gdb/doc/ChangeLog: * gdb.texinfo (Remote Configuration): Document the "set/show remote hostio-fstat-packet" command. (General Query Packets): Document the vFile:fstat qSupported features. (Host I/O Packets): Document the vFile:fstat packet.
2015-03-04remote+docs: software/hardware breakpoint trapsPedro Alves1-0/+10
This adjusts target remote to tell the core whether a trap was caused by a breakpoint. To that end, the patch teaches GDB about new RSP stop reasons "T05 swbreak" and "T05 hwbreak", that remote targets report back to GDB, similarly to how "T05 watch" indicates a stop caused by a watchpoint. Because targets that can report these events are expected to themselves adjust the PC after a software breakpoint, these new stop reasons must only be reported if the stub is talking to a GDB that understands them. Because of that, the use of the new stop reasons needs to be handshaked on initial connection, using the qSupported mechanism. GDB simply sends "swbreak+" in its qSupports query, and the stub reports back "swbreak+" too. Because these new stop reasons are required to fix a fundamental non-stop mode problem, this commit extends the remote non-stop intro section in the manual, documenting the events as required. To be clear, GDB will still cope with remote targets that don't support these new stop reasons; it will behave just like today. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons. * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>: Delete field. <stop_reason>: New field. (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values. (packet_set_cmd_state): New function. (remote_protocol_features): Register the "swbreak" and "hwbreak" features. (remote_query_supported): If not disabled with the corresponding "set remote foo-packet" command, report support for the swbreak and hwbreak features. (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete field. <stop_reason>: New field. (remote_parse_stop_reply): Handle "swbreak" and "hwbreak". (remote_wait_as): Adjust. (remote_stopped_by_sw_breakpoint) (remote_supports_stopped_by_sw_breakpoint) (remote_stopped_by_hw_breakpoint) (remote_supports_stopped_by_hw_breakpoint): New functions. (remote_stopped_by_watchpoint): New function. (init_remote_ops): Install them. (_initialize_remote): Register new "set/show remote swbreak-feature-packet" and "set/show remote swbreak-feature-packet" commands. gdb/doc/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * gdb.texinfo (Remote Configuration): Document the "set/show remote swbreak-feature-packet" and "set/show remote hwbreak-feature-packet" commands. (Packets) <Z0>: Add cross link to the "swbreak" stop reason's decription. (Stop Reply Packets): Document the swbreak and hwbreak stop reasons. (General Query Packets): Document the swbreak and hwbreak qSupported features. (Remote Non-Stop): Explain that swbreak and hwbreak are required.
2015-03-02S390: Add vector register support to gdbAndreas Arnez1-0/+3
Recognize S/390 targets with the new vector feature and present their vector registers appropriately: as 32 new 128-bit wide registers v0-v31, where the first 16 embed the floating point registers f0-f15. Each of the full registers v0-v15 is modelled as a pseudo register. gdb/ChangeLog: * s390-linux-nat.c (have_regset_vxrs): New static variable. (s390_linux_fetch_inferior_registers): Handle vector registers, if present. (s390_linux_store_inferior_registers): Likewise. (s390_get_hwcap): Remove function. Embed its logic... (s390_read_description): ...here. Yield a target description with vector registers if applicable. * s390-linux-tdep.c: Include "features/s390-vx-linux64.c", "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and "features/s390x-tevx-linux64.c". (struct gdbarch_tdep) <v0_full_regnum>: New field. (s390_dwarf_regmap): Add vector registers. Remove bogus entries for "GNU/Linux-specific registers". (s390_dwarf_reg_r0l): New enum value. (s390_dwarf_reg_to_regnum): Support vector registers. (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers of GPR lower halves. (regnum_is_vxr_full): New function. (s390_register_name): New function. (s390_pseudo_register_name): Handle v0-v15, which are composed of f0-f15 and v0l-v15l. (s390_pseudo_register_type): Likewise. (s390_pseudo_register_read): Likewise. (s390_pseudo_register_write): Likewise. (s390_value_from_register): Account for the fact that values are placed left-justified in vector registers. (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to the vector reggroup and omit them from the general reggroup. (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps. (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets. (s390_iterate_over_regset_sections): Add iterations for the two new vector regsets. (s390_core_read_description): Yield a target description with vector registers if applicable. (s390_gdbarch_init): Handle target descriptions with vector registers. Add "register_name" gdbarch method. (_initialize_s390_tdep): Call new tdesc initialization functions. * s390-linux-tdep.h (HWCAP_S390_VX): New macro. (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM) (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM) (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM) (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM) (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM) (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM) (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM) (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM) (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM) (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM) (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM) (S390_V30_REGNUM, S390_V31_REGNUM): New macros. (S390_NUM_REGS): Adjust value. (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare. (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64) (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise. * NEWS: Announce S/390 vector register support.
2015-02-17Announce the DTrace USDT probes support in NEWS.Jose E. Marchesi1-0/+3
This patch simply adds a small entry to `Changes since GDB 7.8' announcing the support for dtrace probes. gdb/ChangeLog: 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> * NEWS: Announce the support for DTrace SDT probes.
2015-02-09record-btrace: add bts buffer size configuration optionMarkus Metzger1-0/+14
Allow the size of the branch trace ring buffer to be defined by the user. The specified buffer size will be used when BTS tracing is enabled for new threads. The obtained buffer size may differ from the requested size. The actual buffer size for the current thread is shown in the "info record" command. Bigger buffers mean longer traces, but also longer processing time. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (parse_xml_btrace_conf_bts): Add size. (btrace_conf_bts_attributes): New. (btrace_conf_children): Add attributes. * common/btrace-common.h (btrace_config_bts): New. (btrace_config)<bts>: New. (btrace_config): Update comment. * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts): Use config. * features/btrace-conf.dtd: Increment version. Add size attribute to bts element. * record-btrace.c (set_record_btrace_bts_cmdlist, show_record_btrace_bts_cmdlist): New. (record_btrace_adjust_size, record_btrace_print_bts_conf, record_btrace_print_conf, cmd_set_record_btrace_bts, cmd_show_record_btrace_bts): New. (record_btrace_info): Call record_btrace_print_conf. (_initialize_record_btrace): Add commands. * remote.c: Add PACKET_Qbtrace_conf_bts_size enum. (remote_protocol_features): Add Qbtrace-conf:bts:size packet. (btrace_sync_conf): Synchronize bts size. (_initialize_remote): Add Qbtrace-conf:bts:size packet. * NEWS: Announce new commands and new packets. doc/ * gdb.texinfo (Branch Trace Configuration Format): Add size. (Process Record and Replay): Describe new set|show commands. (General Query Packets): Describe Qbtrace-conf:bts:size packet. testsuite/ * gdb.btrace/buffer-size: New. gdbserver/ * linux-low.c (linux_low_btrace_conf): Print size. * server.c (handle_btrace_conf_general_set): New. (hanle_general_set): Call handle_btrace_conf_general_set. (handle_query): Report Qbtrace-conf:bts:size as supported.
2015-02-09record btrace: add configuration structMarkus Metzger1-0/+9
Add a struct to describe the branch trace configuration and use it for enabling branch tracing. The user will be able to set configuration fields for each tracing format to be used for new threads. The actual configuration that is active for a given thread will be shown in the "info record" command. At the moment, the configuration struct only contains a format field that is set to the only available format. The format is the only configuration option that can not be set via set commands. It is given as argument to the "record btrace" command when starting recording. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (XMLFILES): Add btrace-conf.dtd. * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. (x86_linux_btrace_conf): New. (x86_linux_create_target): Initialize to_btrace_conf. * nat/linux-btrace.c (linux_enable_btrace): Update parameters. Check format. Split into this and ... (linux_enable_bts): ... this. (linux_btrace_conf): New. (perf_event_skip_record): Renamed into ... (perf_event_skip_bts_record): ... this. Updated users. (linux_disable_btrace): Split into this and ... (linux_disable_bts): ... this. (linux_read_btrace): Check format. * nat/linux-btrace.h (linux_enable_btrace): Update parameters. (linux_btrace_conf): New. (btrace_target_info)<ptid>: Moved. (btrace_target_info)<conf>: New. (btrace_target_info): Split into this and ... (btrace_tinfo_bts): ... this. Updated users. * btrace.c (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) (btrace_conf_children, btrace_conf_attributes) (btrace_conf_elements): New. * btrace.h (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf): New. * common/btrace-common.h (btrace_config): New. * feature/btrace-conf.dtd: New. * record-btrace.c (record_btrace_conf): New. (record_btrace_cmdlist): New. (record_btrace_enable_warn, record_btrace_open): Pass &record_btrace_conf. (record_btrace_info): Print recording format. (cmd_record_btrace_bts_start): New. (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. (_initialize_record_btrace): Add "record btrace bts" subcommand. Add "record bts" alias command. * remote.c (remote_state)<btrace_config>: New. (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. (remote_protocol_features): Add qXfer:btrace-conf:read. (remote_open_1): Call remote_btrace_reset. (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. (btrace_target_info)<conf>: New. (btrace_sync_conf, btrace_read_config): New. (remote_enable_btrace): Update parameters. Call btrace_sync_conf and btrace_read_conf. (remote_btrace_conf): New. (init_remote_ops): Initialize to_btrace_conf. (_initialize_remote): Add qXfer:btrace-conf packet. * target.c (target_enable_btrace): Update parameters. (target_btrace_conf): New. * target.h (target_enable_btrace): Update parameters. (target_btrace_conf): New. (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. (target_ops)<to_enable_btrace>: Update parameters and comment. (target_ops)<to_btrace_conf>: New. * target-delegates: Regenerate. * target-debug.h (target_debug_print_const_struct_btrace_config_p) (target_debug_print_const_struct_btrace_target_info_p): New. NEWS: Announce new command and new packet. doc/ * gdb.texinfo (Process Record and Replay): Describe the "record btrace bts" command. (General Query Packets): Describe qXfer:btrace-conf:read packet. (Branch Trace Configuration Format): New. gdbserver/ * linux-low.c (linux_low_enable_btrace): Update parameters. (linux_low_btrace_conf): New. (linux_target_ops)<to_btrace_conf>: Initialize. * server.c (current_btrace_conf): New. (handle_btrace_enable): Rename to ... (handle_btrace_enable_bts): ... this. Pass &current_btrace_conf to target_enable_btrace. Update comment. Update users. (handle_qxfer_btrace_conf): New. (qxfer_packets): Add btrace-conf entry. (handle_query): Report qXfer:btrace-conf:read as supported packet. * target.h (target_ops)<enable_btrace>: Update parameters and comment. (target_ops)<read_btrace_conf>: New. (target_enable_btrace): Update parameters. (target_read_btrace_conf): New. testsuite/ * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2015-01-31Add max-completions parameter, and implement tab-completion limiting.Gary Benson1-0/+7
This commit adds a new exception, MAX_COMPLETIONS_REACHED_ERROR, to be thrown whenever the completer has generated too many candidates to be useful. A new user-settable variable, "max_completions", is added to control this behaviour. A top-level completion limit is added to complete_line_internal, as the final check to ensure the user never sees too many completions. An additional limit is added to default_make_symbol_completion_list_break_on, to halt time-consuming symbol table expansions. gdb/ChangeLog: PR cli/9007 PR cli/11920 PR cli/15548 * cli/cli-cmds.c (complete_command): Notify user if max-completions reached. * common/common-exceptions.h (enum errors) <MAX_COMPLETIONS_REACHED_ERROR>: New value. * completer.h (get_max_completions_reached_message): New declaration. (max_completions): Likewise. (completion_tracker_t): New typedef. (new_completion_tracker): New declaration. (make_cleanup_free_completion_tracker): Likewise. (maybe_add_completion_enum): New enum. (maybe_add_completion): New declaration. (throw_max_completions_reached_error): Likewise. * completer.c (max_completions): New global variable. (new_completion_tracker): New function. (free_completion_tracker): Likewise. (make_cleanup_free_completion_tracker): Likewise. (maybe_add_completions): Likewise. (throw_max_completions_reached_error): Likewise. (complete_line): Remove duplicates and limit result to max_completions entries. (get_max_completions_reached_message): New function. (gdb_display_match_list): Handle max_completions. (_initialize_completer): New declaration and function. * symtab.c: Include completer.h. (completion_tracker): New static variable. (completion_list_add_name): Call maybe_add_completion. (default_make_symbol_completion_list_break_on_1): Renamed from default_make_symbol_completion_list_break_on. Maintain completion_tracker across calls to completion_list_add_name. (default_make_symbol_completion_list_break_on): New function. * top.c (init_main): Set rl_completion_display_matches_hook. * tui/tui-io.c: Include completer.h. (tui_old_rl_display_matches_hook): New static global. (tui_rl_display_match_list): Notify user if max-completions reached. (tui_setup_io): Save/restore rl_completion_display_matches_hook. * NEWS (New Options): Mention set/show max-completions. gdb/doc/ChangeLog: * gdb.texinfo (Command Completion): Document new "set/show max-completions" option. gdb/testsuite/ChangeLog: * gdb.base/completion.exp: Disable completion limiting for existing tests. Add new tests to check completion limiting. * gdb.linespec/ls-errs.exp: Disable completion limiting.
2015-01-31Add symbol lookup cache.Doug Evans1-0/+15
gdb/ChangeLog: Add symbol lookup cache. * NEWS: Document new options and commands. * symtab.c (symbol_cache_key): New static global. (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros. (SYMBOL_LOOKUP_FAILED): New macro. (symbol_cache_slot_state): New enum. (block_symbol_cache): New struct. (symbol_cache): New struct. (new_symbol_cache_size, symbol_cache_size): New static globals. (hash_symbol_entry, eq_symbol_entry): New functions. (symbol_cache_byte_size, resize_symbol_cache): New functions. (make_symbol_cache, free_symbol_cache): New functions. (get_symbol_cache, symbol_cache_cleanup): New function. (set_symbol_cache_size, set_symbol_cache_size_handler): New functions. (symbol_cache_lookup, symbol_cache_clear_slot): New function. (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions. (symbol_cache_flush, symbol_cache_dump): New functions. (maintenance_print_symbol_cache): New function. (maintenance_flush_symbol_cache): New function. (symbol_cache_stats): New function. (maintenance_print_symbol_cache_statistics): New function. (symtab_new_objfile_observer): New function. (symtab_free_objfile_observer): New function. (lookup_static_symbol, lookup_global_symbol): Use symbol cache. (_initialize_symtab): Init symbol_cache_key. New parameter maint symbol-cache-size. New maint commands print symbol-cache, print symbol-cache-statistics, flush-symbol-cache. Install new_objfile, free_objfile observers. gdb/doc/ChangeLog: * gdb.texinfo (Symbols): Document new commands "maint print symbol-cache", "maint print symbol-cache-statistics", "maint flush-symbol-cache". Document new option "maint set symbol-cache-size".
2015-01-31Add support for inlining scripts into .debug_gdb_scripts.Doug Evans1-0/+5
include/gdb/ChangeLog: * section-scripts.h: Remove "future extension" comment. (SECTION_SCRIPT_ID_PYTHON_TEXT): New macro. (SECTION_SCRIPT_ID_SCHEME_TEXT): New macro. gdb/ChangeLog: * NEWS: Mention inlined scripts in .debug_gdb_scripts section. * auto-load.c: #include ctype.h. (struct auto_load_pspace_info): Replace member loaded_scripts with new members loaded_script_files, loaded_script_texts. (auto_load_pspace_data_cleanup): Update. (init_loaded_scripts_info): Update. (get_auto_load_pspace_data_for_loading): Update. (maybe_add_script_file): Renamed from maybe_add_script. All callers updated. (maybe_add_script_text): New function. (clear_section_scripts): Update. (source_script_file, execute_script_contents): New functions. (source_section_scripts): Add support for SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT. (print_scripts): New function. (auto_load_info_scripts): Also print inlined scripts. (maybe_print_unsupported_script_warning): Renamed from unsupported_script_warning_print. All callers updated. (maybe_print_script_not_found_warning): Renamed from script_not_found_warning_print. All callers updated. * extension-priv.h (struct extension_language_script_ops): New member objfile_script_executor. * extension.c (ext_lang_objfile_script_executor): New function. * extension.h (objfile_script_executor_func): New typedef. (ext_lang_objfile_script_executor): Declare. * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare. * guile/guile.c (guile_extension_script_ops): Update. * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function. * python/python.c (python_extension_script_ops): Update. (gdbpy_execute_objfile_script): New function. gdb/doc/ChangeLog: * gdb.texinfo (dotdebug_gdb_scripts section): Update docs to distinguish script files vs inlined scripts. * python.texi (Python Auto-loading): Ditto. gdb/testsuite/ChangeLog: * gdb.guile/scm-section-script.c: Add duplicate inlined section script entries. Duplicate file section script entries. * gdb.guile/scm-section-script.exp: Add tests for duplicate entries, inlined entries. Add test for safe-path rejection. * gdb.python/py-section-script.c: Add duplicate inlined section script entries. Duplicate file section script entries. * gdb.python/py-section-script.exp: Add tests for duplicate entries, inlined entries. Add test for safe-path rejection.
2015-01-30Add producer string to output of info source.Doug Evans1-0/+4
gdb/ChangeLog: * NEWS: "info source" command now display producer string if present. * source.c (source_info): Print producer string if present. gdb/doc/ChangeLog: * gdb.texinfo (Symbols) <info source>: Output now contains producer string if present.
2015-01-27Add gdb.Objfile.username.Doug Evans1-0/+6
gdb/ChangeLog: * NEWS: Mention gdb.Objfile.username. * python/py-objfile.c (objfpy_get_username): New function. (objfile_getset): Add "username". gdb/doc/ChangeLog: * python.texi (Objfiles In Python): Document Objfile.username. gdb/testsuite/ChangeLog: * gdb.python/py-objfile.exp: Add tests for objfile.username. Add test for objfile.filename, objfile.username after objfile has been unloaded.
2015-01-22Sort threads for thread apply allJan Kratochvil1-0/+5
downstream Fedora request: Please make it easier to find the backtrace of the crashing thread https://bugzilla.redhat.com/show_bug.cgi?id=1024504 Currently after loading a core file GDB prints: Core was generated by `./threadcrash1'. Program terminated with signal SIGSEGV, Segmentation fault. 8 *(volatile int *)0=0; (gdb) _ there is nowhere seen which of the threads had crashed. In reality GDB always numbers that thread as #1 and it is the current thread that time. But after dumping all the info into a file for later analysis it is no longer obvious. 'thread apply all bt' even puts the thread #1 to the _end_ of the output!!! I find maybe as good enough and with no risk of UI change flamewar to just sort the threads by their number. Currently they are printed as they happen in the internal GDB list which has no advantage. Printing thread #1 as the first one with assumed 'thread apply all bt' (after the core file is loaded) should make the complaint resolved I guess. On Thu, 15 Jan 2015 20:29:07 +0100, Doug Evans wrote: No objection to sorting the list, but if thread #1 is the important one, then a concern could be it'll have scrolled off the screen (such a concern has been voiced in another thread in another context), and if not lost (say it's in an emacs buffer) one would still have to scroll back to see it. So one *could* still want #1 to be last. Do we want an option to choose the sort direction? gdb/ChangeLog 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com> * NEWS (Changes since GDB 7.9): Add 'thread apply all' option '-ascending'. * thread.c (tp_array_compar_ascending, tp_array_compar): New. (thread_apply_all_command): Parse CMD for tp_array_compar_ascending. Sort tp_array using tp_array_compar. (_initialize_thread): Extend thread_apply_all_command help. gdb/doc/ChangeLog 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.texinfo (Threads): Describe -ascending for thread apply all.
2015-01-13Update NEWS post GDB 7.9 branch creation.Joel Brobecker1-1/+3
gdb/ChangeLog: * NEWS: Create a new section for the next release branch. Rename the section of the current branch, now that it has been cut.
2015-01-11Temporarily revert symbol lookup cache.Doug Evans1-13/+0
clear_symtab_users calls breakpoint_re_set before observer_notify_new_objfile(NULL), and thus symbol lookup done during breakpoint_re_set will see a stale cache. Presumably we just need to move the call to observer_notify_new_objfile(NULL) to before breakpoint_re_set, but need to check for other such issues, and 7.9 is scheduled to branch tomorrow. Reverts commits: b2fb95e006c29e2cbe4b30523879fe3640f906ad 400678a494713abf8f7ea2367f213109a2c4b886 d98b9ccbccf36563dad92f6093a93655b38bc51b 77087adf50cedf78cc216ac6eb3b2863839d713c gdb/ChangeLog: * symtab.c (eq_symbol_entry): Use SYMBOL_SEARCH_NAME and symbol_matches_domain for symbol comparisons. * symtab.c (symbol_cache_mark_found): Improve function comment. Rename parameter objfile to objfile_context. (symbol_cache_mark_not_found): Improve function comment. Add symbol lookup cache. * NEWS: Document new options and commands. * symtab.c (symbol_cache_key): New static global. (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros. (SYMBOL_LOOKUP_FAILED): New macro. (symbol_cache_slot_state): New enum. (block_symbol_cache): New struct. (symbol_cache): New struct. (new_symbol_cache_size, symbol_cache_size): New static globals. (hash_symbol_entry, eq_symbol_entry): New functions. (symbol_cache_byte_size, resize_symbol_cache): New functions. (make_symbol_cache, free_symbol_cache): New functions. (get_symbol_cache, symbol_cache_cleanup): New function. (set_symbol_cache_size, set_symbol_cache_size_handler): New functions. (symbol_cache_lookup, symbol_cache_clear_slot): New function. (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions. (symbol_cache_flush, symbol_cache_dump): New functions. (maintenance_print_symbol_cache): New function. (maintenance_flush_symbol_cache): New function. (symbol_cache_stats): New function. (maintenance_print_symbol_cache_statistics): New function. (symtab_new_objfile_observer): New function. (symtab_free_objfile_observer): New function. (lookup_static_symbol, lookup_global_symbol): Use symbol cache. (_initialize_symtab): Init symbol_cache_key. New parameter maint symbol-cache-size. New maint commands print symbol-cache, print symbol-cache-statistics, flush-symbol-cache. Install new_objfile, free_objfile observers. gdb/doc/ChangeLog: * gdb.texinfo (Symbols): Document new commands "maint print symbol-cache", "maint print symbol-cache-statistics", "maint flush-symbol-cache". Document new option "maint set symbol-cache-size".
2015-01-11PR gdb/15830Doug Evans1-0/+6
gdb/ChangeLog: PR gdb/15830 * NEWS: The "maint demangle" command is renamed as "demangle". * demangle.c: #include cli/cli-utils.h, language.h. (demangle_command): New function. (_initialize_demangle): Add new command "demangle". * maint.c (maintenance_demangle): Stub out. (_initialize_maint_cmds): Update help text for "maint demangle", and mark as deprecated. gdb/doc/ChangeLog: * gdb.texinfo (Debugging C Plus Plus): Mention "demangle". (Symbols): Ditto. (Maintenance Commands): Delete docs for "maint demangle". gdb/testsuite/ChangeLog: * gdb.base/maint.exp: Remove references to "maint demangle". * gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle". Add tests for explicitly specifying language to demangle. * gdb.dlang/demangle.exp: Ditto.
2015-01-10Add symbol lookup cache.Doug Evans1-0/+13
gdb/ChangeLog: Add symbol lookup cache. * NEWS: Document new options and commands. * symtab.c (symbol_cache_key): New static global. (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros. (SYMBOL_LOOKUP_FAILED): New macro. (symbol_cache_slot_state): New enum. (block_symbol_cache): New struct. (symbol_cache): New struct. (new_symbol_cache_size, symbol_cache_size): New static globals. (hash_symbol_entry, eq_symbol_entry): New functions. (symbol_cache_byte_size, resize_symbol_cache): New functions. (make_symbol_cache, free_symbol_cache): New functions. (get_symbol_cache, symbol_cache_cleanup): New function. (set_symbol_cache_size, set_symbol_cache_size_handler): New functions. (symbol_cache_lookup, symbol_cache_clear_slot): New function. (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions. (symbol_cache_flush, symbol_cache_dump): New functions. (maintenance_print_symbol_cache): New function. (maintenance_flush_symbol_cache): New function. (symbol_cache_stats): New function. (maintenance_print_symbol_cache_statistics): New function. (symtab_new_objfile_observer): New function. (symtab_free_objfile_observer): New function. (lookup_static_symbol, lookup_global_symbol): Use symbol cache. (_initialize_symtab): Init symbol_cache_key. New parameter maint symbol-cache-size. New maint commands print symbol-cache, print symbol-cache-statistics, flush-symbol-cache. Install new_objfile, free_objfile observers. doc/ChangeLog: * gdb.texinfo (Symbols): Document new commands "maint print symbol-cache", "maint print symbol-cache-statistics", "maint flush-symbol-cache". Document new option "maint set symbol-cache-size".
2014-12-31Remove "add-shared-symbol-files", "dll-symbols" and "assf" commands doc.Joel Brobecker1-0/+4
This patch removes documentation from some commands whose support has been recently removed. gdb/ChangeLog: * NEWS: Document removal of "dll-symbols", "add-shared-symbol-files" and "assf" commands. gdb/doc/ChangeLog: * gdb.texinfo (Files): Remove documentation of the "add-shared-symbol-files" and "assf" commands. (Cygwin Native): Remove documentation of the "dll-symbols" command.
2014-12-19MIPS SDE OS ABI supportYao Qi1-0/+4
This patch is to add SDE OS ABI support in GDB, which has been used in codesourcery gdb tree for some years. gdb: 2014-12-19 Maciej W. Rozycki <macro@codesourcery.com> Nigel Stephens <nigel@mips.com> Chris Dearman <chris@mips.com> Luis Machado <lgustavo@codesourcery.com> * Makefile.in (ALL_TARGET_OBS): Add mips-sde-tdep.o. (ALLDEPFILES): Add mips-sde-tdep.c. * mips-sde-tdep.c: New file containg SDE specific code. * configure.tgt (mips*-sde*-elf*): Add mips-sde-dep.o to gdb_target_obs. * defs.h (gdb_osabi): Add GDB_OSABI_SDE. * osabi.c (gdb_osabi_names): Add SDE. * NEWS: Mention the change.
2014-12-17New parameter "debug symbol-lookup".Doug Evans1-0/+6
gdb/ChangeLog: New parameter "debug symbol-lookup". * NEWS: Mention it. * cp-namespace.c (cp_lookup_symbol_imports_or_template): Add debug output. (cp_lookup_symbol_namespace, cp_lookup_symbol_nonlocal): Ditto. (cp_lookup_nested_symbol): Ditto. * language.c (language_lookup_primitive_type_by_name): Add debug output. * minsyms.c (lookup_minimal_symbol): Add debug output. * objfiles.c (objfile_debug_name): Moved here, and renamed ... * symfile-debug.c (debug_objfile_name): ... from here. All callers updated. * objfiles.h (objfile_debug_name): Declare. * symtab.h (symbol_lookup_debug): Declare. * symtab.c (symbol_lookup_debug): New global. (lookup_language_this): Add debug output. (lookup_symbol_aux, lookup_symbol_in_block): Ditto. (lookup_symbol_in_objfile_symtabs, lookup_symbol_via_quick_fns): Ditto. (lookup_symbol_in_static_block, lookup_symbol_in_objfile): Ditto. (_initialize_symtab): Add new parameter "debug symbol-lookup". gdb/doc/ChangeLog: * gdb.texinfo (Debugging Output): Document "debug symbol-lookup".
2014-12-16Move NEWS entries to the right sectionYao Qi1-10/+8
gdb: 2014-12-16 Yao Qi <yao@codesourcery.com> * NEWS: Move some entries to "Changes since GDB 7.8" section.
2014-12-12the "compile" commandTom Tromey1-0/+19
This final patch adds the new "compile" command and subcommands, and all the machinery needed to make it work. A shared library supplied by gcc is used for all communications with gcc. Types and most aspects of symbols are provided directly by gdb to the compiler using this library. gdb provides some information about the user's code using plain text. Macros are emitted this way, and DWARF location expressions (and bounds for VLA) are compiled to C code. This hybrid approach was taken because, on the one hand, it is better to provide global declarations and such on demand; but on the other hand, for local variables, translating DWARF location expressions to C was much simpler than exporting a full compiler API to gdb -- the same result, only easier to implement, understand, and debug. In the ordinary mode, the user's expression is wrapped in a dummy function. After compilation, gdb inserts the resulting object code into the inferior, then calls this function. Access to local variables is provided by noting which registers are used by location expressions, and passing a structure of register values into the function. Writes to registers are supported by copying out these values after the function returns. This approach was taken so that we could eventually implement other more interesting features based on this same infrastructure; for example, we're planning to investigate inferior-side breakpoint conditions. gdb/ChangeLog 2014-12-12 Phil Muldoon <pmuldoon@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Tom Tromey <tromey@redhat.com> * NEWS: Update. * symtab.h (struct symbol_computed_ops) <generate_c_location>: New field. * p-lang.c (pascal_language_defn): Update. * opencl-lang.c (opencl_language_defn): Update. * objc-lang.c (objc_language_defn): Update. * m2-lang.c (m2_language_defn): Update. * language.h (struct language_defn) <la_get_compile_instance, la_compute_program>: New fields. * language.c (unknown_language_defn, auto_language_defn) (local_language_defn): Update. * jv-lang.c (java_language_defn): Update. * go-lang.c (go_language_defn): Update. * f-lang.c (f_language_defn): Update. * dwarf2loc.h (dwarf2_compile_property_to_c): Declare. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): New functions. (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update. * defs.h (enum compile_i_scope_types): New. (enum command_control_type) <compile_control>: New constant. (struct command_line) <control_u>: New field. * d-lang.c (d_language_defn): Update. * compile/compile.c: New file. * compile/compile-c-support.c: New file. * compile/compile-c-symbols.c: New file. * compile/compile-c-types.c: New file. * compile/compile.h: New file. * compile/compile-internal.h: New file. * compile/compile-loc2c.c: New file. * compile/compile-object-load.c: New file. * compile/compile-object-load.h: New file. * compile/compile-object-run.c: New file. * compile/compile-object-run.h: New file. * cli/cli-script.c (multi_line_command_p, print_command_lines) (execute_control_command, process_next_line) (recurse_read_control_structure): Handle compile_control. * c-lang.h (c_get_compile_context, c_compute_program): Declare. * c-lang.c (c_language_defn, cplus_language_defn) (asm_language_defn, minimal_language_defn): Update. * ada-lang.c (ada_language_defn): Update. * Makefile.in (SUBDIR_GCC_COMPILE_OBS, SUBDIR_GCC_COMPILE_SRCS): New variables. (SFILES): Add SUBDIR_GCC_COMPILE_SRCS. (HFILES_NO_SRCDIR): Add compile.h. (COMMON_OBS): Add SUBDIR_GCC_COMPILE_OBS. (INIT_FILES): Add SUBDIR_GCC_COMPILE_SRCS. (compile.o, compile-c-types.o, compile-c-symbols.o) (compile-object-load.o, compile-object-run.o, compile-loc2c.o) (compile-c-support.o): New targets. gdb/doc/ChangeLog 2014-12-12 Phil Muldoon <pmuldoon@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.texinfo (Altering): Update. (Compiling and Injecting Code): New node. gdb/testsuite/ChangeLog 2014-12-12 Phil Muldoon <pmuldoon@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Tom Tromey <tromey@redhat.com> * configure.ac: Add gdb.compile/. * configure: Regenerate. * gdb.compile/Makefile.in: New file. * gdb.compile/compile-ops.exp: New file. * gdb.compile/compile-ops.c: New file. * gdb.compile/compile-tls.c: New file. * gdb.compile/compile-tls.exp: New file. * gdb.compile/compile-constvar.S: New file. * gdb.compile/compile-constvar.c: New file. * gdb.compile/compile-mod.c: New file. * gdb.compile/compile-nodebug.c: New file. * gdb.compile/compile-setjmp-mod.c: New file. * gdb.compile/compile-setjmp.c: New file. * gdb.compile/compile-setjmp.exp: New file. * gdb.compile/compile-shlib.c: New file. * gdb.compile/compile.c: New file. * gdb.compile/compile.exp: New file. * lib/gdb.exp (skip_compile_feature_tests): New proc.
2014-12-12New python function gdb.lookup_objfile.Doug Evans1-0/+1
gdb/ChangeLog: * NEWS: Mention gdb.lookup_objfile. * python/python.c (GdbMethods): Add lookup_objfile. * python/python-internal.h (gdbpy_lookup_objfile): Declare. * python/py-objfile.c: #include "symtab.h". (objfpy_build_id_ok, objfpy_build_id_matches): New functions. (objfpy_lookup_objfile_by_name): New function. (objfpy_lookup_objfile_by_build_id): New function. (gdbpy_lookup_objfile): New function. gdb/doc/ChangeLog: * python.texi (Objfiles In Python): Document gdb.lookup_objfile. gdb/testsuite/ChangeLog: * lib/gdb-python.exp (get_python_valueof): New function. * gdb.python/py-objfile.exp: Add tests for gdb.lookup_objfile.
2014-12-12Add new GDB command "maint print user-registers"Andreas Arnez1-0/+3
This adds a command for listing the "user" registers. So far GDB offered no means of determining the set of user registers and omitted them from all other register listings. gdb/ChangeLog: * user-regs.c: Include "arch-utils.h", "command.h", and "cli/cli-cmds.h". (maintenance_print_user_registers): New. (_initialize_user_regs): Register new "maint print user-registers" subcommand. * NEWS: Mention new GDB command "maint print user-registers". gdb/doc/ChangeLog: * gdb.texinfo: Document "maint print user-registers".
2014-12-08New "owner" attribute for gdb.Objfile.Doug Evans1-0/+1
gdb/ChangeLog: * NEWS: Mention gdb.Objfile.owner. * python/py-objfile.c (objfpy_get_owner): New function. (objfile_getset): Add "owner". gdb/doc/ChangeLog: * python.texi (Objfiles In Python): Document Objfile.owner. gdb/testsuite/ChangeLog: * gdb.python/py-objfile.exp: Add tests for objfile.owner.
2014-12-04New python method gdb.Objfile.add_separate_debug_file.Doug Evans1-0/+1
gdb/ChangeLog: * NEWS: Mention gdb.Objfile.add_separate_debug_file. * python/py-objfile.c (objfpy_add_separate_debug_file): New function. (objfile_getset): Add "add_separate_debug_file". gdb/doc/ChangeLog: * python.texi (Objfiles In Python): Document Objfile.add_separate_debug_file. gdb/testsuite/ChangeLog: * gdb.python/py-objfile.exp: Add tests for objfile.add_separate_debug_file.
2014-12-04New python attribute gdb.Objfile.build_id.Doug Evans1-0/+2
gdb/ChangeLog: * NEWS: Mention gdb.Objfile.build_id. * build-id.c (build_id_bfd_get): Make non-static. * build-id.h (build_id_bfd_get): Add declaration. * python/py-objfile.c: #include "build-id.h", "elf-bfd.h". (OBJFPY_REQUIRE_VALID): New macro. (objfpy_get_build_id): New function. (objfile_getset): Add "build_id". * utils.c (make_hex_string): New function. * utils.h (make_hex_string): Add declaration. gdb/doc/ChangeLog: * python.texi (Objfiles In Python): Document Objfile.build_id. gdb/testsuite/ChangeLog: * lib/gdb.exp (get_build_id): New function. (build_id_debug_filename_get): Rewrite to use it. * gdb.python/py-objfile.exp: Add test for objfile.build_id.