aboutsummaryrefslogtreecommitdiff
path: root/gdb/NEWS
AgeCommit message (Collapse)AuthorFilesLines
2015-08-24Add "set remote multiprocess-extensions-packet" commandPedro Alves1-0/+4
Being able to force-disable the RSP multiprocess extensions is useful for testing. gdb/ChangeLog: 2015-08-24 Pedro Alves <palves@redhat.com> * NEWS (New commands): Mention set/show remote multiprocess-extensions-packet. * remote.c (remote_query_supported): Only tell the server to use the multiprocess extensions if the user hasn't force-disabled them with "set remote multiprocess-extensions-packet off". gdb/doc/ChangeLog: 2015-08-24 Pedro Alves <palves@redhat.com> * gdb.texinfo (Remote Configuration): Document the "set/show remote multiprocess-extensions-packet" commands.
2015-08-24Delete the remaining ROM monitor targetsPedro Alves1-0/+9
Ref: https://sourceware.org/ml/gdb/2015-07/msg00011.html All of these targets use gdb/monitor.c, which has bit rotted years ago (I'd guess around ~6), and nobody seems to have noticed: | target | source | |----------------+----------------------| | target dbug | gdb/dbug-rom.c | | target picobug | gdb/microblaze-rom.c | | target dink32 | gdb/dink32-rom.c | | target m32r | gdb/m32r-rom.c | | target mon2000 | gdb/m32r-rom.c | | target ppcbug | gdb/ppcbug-rom.c | This deletes them, along with finally removing monitor.c. A manual update will be done separately. gdb/ChangeLog: 2015-08-24 Pedro Alves <palves@redhat.com> * NEWS: Mention removed support for the various ROM monitors. * Makefile.in (ALL_TARGET_OBS): Remove dbug-rom.o, dink32-rom.o, ppcbug-rom.o, m32r-rom.o, dsrec.o and monitor.o from gdb_target_obs. * configure.tgt (h8300-*-*): Remove monitor.o and m32r-rom.o from gdb_target_obs. (m68*-*-*): Remove monitor.o dbug-rom.o and dsrec.o from gdb_target_obs. (microblaze*-linux-*): Remove microblaze-rom.o, monitor.o and dsrec.o from gdb_target_obs. (microblaze*-*-*): Remove microblaze-rom.o, monitor.o and dsrec.o from gdb_target_obs. (powerpc-*-lynx*178): Remove monitor.o and dsrec.o from gdb_target_obs. (powerpc*-*-*): Remove monitor.o, dsrec.o, ppcbug-rom.o and dink32-rom.o from gdb_target_obs. (sh*-*-linux*): Remove monitor.o and dsrec.o from gdb_target_obs. (sh*): Remove monitor.o and dsrec.o from gdb_target_obs. * dbug-rom.c, dink32-rom.c, dsrec.c, m32r-rom.c, microblaze-rom.c, monitor.c, monitor.h, ppcbug-rom.c, srec.h: Delete files.
2015-08-18gdb: Add debug tracing for bfd cache activity.Andrew Burgess1-0/+4
This patch adds a new debug flag bfd-cache, which when set to non-zero produces debugging log messages relating to gdb's bfd cache. gdb/ChangeLog: * gdb_bfd.c (debug_bfd_cache): New variable. (show_bfd_cache_debug): New function. (gdb_bfd_open): Add debug logging. (gdb_bfd_ref): Likewise. (gdb_bfd_unref): Likewise. (_initialize_gdb_bfd): Add new set/show command. * NEWS: Mention new command. gdb/doc/ChangeLog: * gdb.texinfo (File Caching): Document "set/show debug bfd-cache".
2015-08-18gdb: New maintenance command to disable bfd sharing.Andrew Burgess1-0/+4
In some rare maintainer cases it is desirable to be able to disable bfd sharing. This patch adds new commands maintenance set/show commands for bfd-sharing, allowing gdb's bfd cache to be turned off. gdb/ChangeLog: * gdb_bfd.c (bfd_sharing): New variable. (show_bfd_sharing): New function. (gdb_bfd_open): Check bfd_sharing variable. (_initialize_gdb_bfd): Add new set/show command. * NEWS: Mention new command. gdb/doc/ChangeLog: * gdb.texinfo (Maintenance Commands): Move documentation of "main info bfds" to... (File Caching): A New section. Outline bfd caching, and add new description for "main set/show bfd-sharing".
2015-08-14New /s modifier for the disassemble command.Doug Evans1-0/+7
The "source centric" /m option to the disassemble command is often unhelpful, e.g., in the presence of optimized code. This patch adds a /s modifier that is better. For one, /m only prints instructions from the originating source file, leaving out instructions from e.g., inlined functions from other files. gdb/ChangeLog: PR gdb/11833 * NEWS: Document new /s modifier for the disassemble command. * cli/cli-cmds.c (disassemble_command): Add support for /s. (_initialize_cli_cmds): Update online docs of disassemble command. * disasm.c: #include "source.h". (struct deprecated_dis_line_entry): Renamed from dis_line_entry. All uses updated. (dis_line_entry): New struct. (hash_dis_line_entry, eq_dis_line_entry): New functions. (allocate_dis_line_table): New functions. (maybe_add_dis_line_entry, line_has_code_p): New functions. (dump_insns): New arg end_pc. All callers updated. (do_mixed_source_and_assembly_deprecated): Renamed from do_mixed_source_and_assembly. All callers updated. (do_mixed_source_and_assembly): New function. (gdb_disassembly): Handle /s (DISASSEMBLY_SOURCE). * disasm.h (DISASSEMBLY_SOURCE_DEPRECATED): Renamed from DISASSEMBLY_SOURCE. All uses updated. (DISASSEMBLY_SOURCE): New macro. * mi/mi-cmd-disas.c (mi_cmd_disassemble): New modes 4,5. gdb/doc/ChangeLog: * gdb.texinfo (Machine Code): Update docs for mixed source/assembly disassembly. (GDB/MI Data Manipulation): Update docs for new disassembly modes. gdb/testsuite/ChangeLog: * gdb.mi/mi-disassemble.exp: Update. * gdb.base/disasm-optim.S: New file. * gdb.base/disasm-optim.c: New file. * gdb.base/disasm-optim.h: New file. * gdb.base/disasm-optim.exp: New file.
2015-08-11Explicit locations: documentation updatesKeith Seitz1-0/+4
This patch adds documentation for explicit locations to both the User Manual and gdb's online help system. gdb/ChangeLog: * NEWS: Mention explicit locations. * breakpoint.c [LOCATION_HELP_STRING]: New macro. [BREAK_ARGS_HELP]: Use LOCATION_HELP_STRING. (_initialize_breakpoint): Update documentation for "clear", "break", "trace", "strace", "ftrace", and "dprintf". gdb/doc/ChangeLog: * gdb.texinfo (Thread-Specific Breakpoints, Printing Source Lines): Use "location(s)"instead of "linespec(s)". (Specifying a Location): Rewrite. Add subsections describing linespec, address, and explicit locations. Add node/menu for each subsection. (Source and Machine Code, C Preprocessor Macros) (Create and Delete Trace points) (Extensions for Ada Tasks): Use "location(s)" instead of "linespec(s)". (Continuing at a Different Address): Remove "linespec" examples. Add reference to "Specify a Location" (The -break-insert Command): Rewrite. Add anchor. Add reference to appropriate manual section discussing locations. (The -dprintf-insert Command): Refer to -break-insert for specification of 'location'. gdb/testsuite/ChangeLog: * gdb.base/help.exp: Update help_breakpoint_text.
2015-08-07Implement all-stop on top of a target running non-stop modePedro Alves1-0/+14
This finally implements user-visible all-stop mode running with the target_ops backend always in non-stop mode. This is a stepping stone towards finer-grained control of threads, being able to do interesting things like thread groups, associating groups with breakpoints, etc. From the user's perspective, all-stop mode is really just a special case of being able to stop and resume specific sets of threads, so it makes sense to do this step first. With this, even in all-stop, the target is no longer in charge of stopping all threads before reporting an event to the core -- the core takes care of it when it sees fit. For example, when "next"- or "step"-ing, we can avoid stopping and resuming all threads at each internal single-step, and instead only stop all threads when we're about to present the stop to the user. The implementation is almost straight forward, as the heavy lifting has been done already in previous patches. Basically, we replace checks for "set non-stop on/off" (the non_stop global), with calls to a new target_is_non_stop_p function. In a few places, if "set non-stop off", we stop all threads explicitly, and in a few other places we resume all threads explicitly, making use of existing methods that were added for teaching non-stop to step over breakpoints without displaced stepping. This adds a new "maint set target-non-stop on/off/auto" knob that allows both disabling the feature if we find problems, and force-enable it for development (useful when teaching a target about this. The default is "auto", which means the feature is enabled if a new target method says it should be enabled. The patch implements the method in linux-nat.c, just for illustration, because it still returns false. We'll need a few follow up fixes before turning it on by default. This is a separate target method from indicating regular non-stop support, because e.g., while e.g., native linux-nat.c is close to regression free with all-stop-non-stop (with following patches will fixing the remaining regressions), remote.c+gdbserver will still need more fixing, even though it supports "set non-stop on". Tested on x86_64 Fedora 20, native, with and without "set displaced off", and with and without "maint set target-non-stop on"; and also against gdbserver. gdb/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * NEWS: Mention "maint set/show target-non-stop". * breakpoint.c (update_global_location_list): Check target_is_non_stop_p instead of non_stop. * infcmd.c (attach_command_post_wait, attach_command): Likewise. * infrun.c (show_can_use_displaced_stepping) (can_use_displaced_stepping_p, start_step_over_inferior): Likewise. (internal_resume_ptid): New function. (resume): Use it. (proceed): Check target_is_non_stop_p instead of non_stop. If in all-stop mode but the target is always in non-stop mode, start all the other threads that are implicitly resumed too. (for_each_just_stopped_thread, fetch_inferior_event) (adjust_pc_after_break, stop_all_threads): Check target_is_non_stop_p instead of non_stop. (handle_inferior_event): Likewise. Handle detach-fork in all-stop with the target always in non-stop mode. (handle_signal_stop) <random signal>: Check target_is_non_stop_p instead of non_stop. (switch_back_to_stepped_thread): Check target_is_non_stop_p instead of non_stop. (keep_going_stepped_thread): Use internal_resume_ptid. (stop_waiting): If in all-stop mode, and the target is in non-stop mode, stop all threads. (keep_going_pass): Likewise, when starting a new in-line step-over sequence. * linux-nat.c (get_pending_status, select_event_lwp) (linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check target_is_non_stop_p instead of non_stop. (linux_nat_always_non_stop_p): New function. (linux_nat_stop): Check target_is_non_stop_p instead of non_stop. (linux_nat_add_target): Install linux_nat_always_non_stop_p. * target-delegates.c: Regenerate. * target.c (target_is_non_stop_p): New function. (target_non_stop_enabled, target_non_stop_enabled_1): New globals. (maint_set_target_non_stop_command) (maint_show_target_non_stop_command): New functions. (_initilize_target): Install "maint set/show target-non-stop" commands. * target.h (struct target_ops) <to_always_non_stop_p>: New field. (target_non_stop_enabled): New declaration. (target_is_non_stop_p): New declaration. gdb/doc/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * gdb.texinfo (Maintenance Commands): Document "maint set/show target-non-stop".
2015-08-07btrace: indicate speculative executionMarkus Metzger1-0/+3
Indicate speculatively executed instructions with a leading '?'. We use the space that is normally used for the PC prefix. In the case where the instruction at the current PC had been executed speculatively before, the PC prefix will be partially overwritten resulting in "?> ". As a side-effect, the /p modifier to omit the PC prefix in the "record instruction-history" command now uses a 3-space PC prefix " " in order to have enough space for the speculative execution indication. gdb/ * btrace.c (btrace_compute_ftrace_bts): Clear insn flags. (pt_btrace_insn_flags): New. (ftrace_add_pt): Call pt_btrace_insn_flags. * btrace.h (btrace_insn_flag): New. (btrace_insn) <flags>: New. * record-btrace.c (btrace_insn_history): Print insn prefix. * NEWS: Announce it. doc/ * gdb.texinfo (Process Record and Replay): Document prefixing of speculatively executed instructions in the "record instruction-history" command. testsuite/ * gdb.btrace/instruction_history.exp: Update. * gdb.btrace/tsx.exp: New. * gdb.btrace/tsx.c: New. * lib/gdb.exp (skip_tsx_tests, skip_btrace_pt_tests): New.
2015-07-15Revert the previous 7 commits of: Validate binary before useJan Kratochvil1-14/+0
ddc98fbf2fd9e244a215a4d09e559180dc573a14 Create empty nat/linux-maps.[ch] and common/target-utils.[ch] 6e5b4429db0d66e2d0b27e1bcfe4709f3dae73ed Move gdb_regex* to common/ f7af1fcd759fa126612018a5916cf808df7bb8bc Prepare linux_find_memory_regions_full & co. for move 9904185cfde13d6c6849f1f042c8e3b74974cf08 Move linux_find_memory_regions_full & co. 700ca40f6fc1addd7238f4ab57f76c095ad3c99f gdbserver build-id attribute generator ca5268b6be265580b91ef75c1a1a9815f581ae42 Validate symbol file using build-id 0a94970d663a053c523f23ac0d71deb25a77f709 Tests for validate symbol file using build-id gdb/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 6 commits: Create empty nat/linux-maps.[ch] and common/target-utils.[ch]. Move gdb_regex* to common/ Prepare linux_find_memory_regions_full & co. for move Move linux_find_memory_regions_full & co. gdbserver build-id attribute generator Validate symbol file using build-id gdb/gdbserver/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 3 commits: Move gdb_regex* to common/ Move linux_find_memory_regions_full & co. gdbserver build-id attribute generator gdb/doc/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous 2 commits: gdbserver build-id attribute generator Validate symbol file using build-id gdb/testsuite/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> Revert the previous commit: Tests for validate symbol file using build-id.
2015-07-15Validate symbol file using build-idJan Kratochvil1-0/+14
Consumer part of the "build-id" attribute. gdb/ChangeLog 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com Jan Kratochvil <jan.kratochvil@redhat.com> Validate symbol file using build-id. * NEWS (Changes since GDB 7.10): Add 'set validate-build-id' and 'show validate-build-id'. Add build-id attribute. * solib-darwin.c (_initialize_darwin_solib): Assign validate value. * solib-dsbt.c (_initialize_dsbt_solib): Ditto. * solib-frv.c (_initialize_frv_solib): Ditto. * solib-spu.c (set_spu_solib_ops): Ditto. * solib-svr4.c: Include rsp-low.h. (NOTE_GNU_BUILD_ID_NAME): New define. (svr4_validate): New function. (svr4_copy_library_list): Duplicate field build_id. (library_list_start_library): Parse 'build-id' attribute. (svr4_library_attributes): Add 'build-id' attribute. (_initialize_svr4_solib): Assign validate value. * solib-target.c (solib.h): Include. (_initialize_solib_target): Assign validate value. * solib.c (validate_build_id, show_validate_build_id): New. (solib_map_sections): Use ops->validate. (clear_so): Free build_id. (default_solib_validate): New function. (_initialize_solib): Add "validate-build-id". * solib.h (default_solib_validate): New declaration. * solist.h (struct so_list): New fields 'build_idsz' and 'build_id'. (target_so_ops): New field 'validate'. gdb/doc/ChangeLog 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.texinfo (Files): Add 'set validate-build-id' and 'show validate-build-id'.
2015-07-09Add NEWS entry for tracepoints support on aarch64-linuxPierre Langlois1-0/+2
gdb/ChangeLog: * NEWS: Mention support for tracepoints on aarch64-linux.
2015-07-06Update NEWS post GDB 7.10 branch creation.Joel Brobecker1-1/+3
gdb/ChangeLog: * NEWS: Create a new section for the next release branch. Rename the section of the current branch, now that it has been cut.
2015-07-02btrace: maintenance commandsMarkus Metzger1-0/+17
Add maintenance commands that help debugging the btrace record target. The following new commands are added: maint info btrace Print information about branch tracing internals. maint btrace packet-history Print the raw branch tracing data. maint btrace clear-packet-history Discard the stored raw branch tracing data. maint btrace clear Discard all branch tracing data. It will be fetched and processed anew by the next "record" command. maint set|show btrace pt skip-pad Set and show whether PAD packets are skipped when computing the packet history. gdb/ * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h. (maint_btrace_cmdlist, maint_btrace_set_cmdlist) (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist) (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad) (btrace_maint_clear): New. (btrace_fetch, btrace_clear): Call btrace_maint_clear. (pt_print_packet, btrace_maint_decode_pt) (btrace_maint_update_pt_packets, btrace_maint_update_packets) (btrace_maint_print_packets, get_uint, get_context_size, no_chunk) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd) (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd) (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd) (maint_info_btrace_cmd, _initialize_btrace): New. * btrace.h (btrace_pt_packet, btrace_pt_packet_s) (btrace_maint_packet_history, btrace_maint_info): New. (btrace_thread_info) <maint>: New. * NEWS: Announce it. doc/ * gdb.texinfo (Maintenance Commands): Document "maint btrace" commands.
2015-07-02btrace: support Intel(R) Processor TraceMarkus Metzger1-0/+19
Adds a new command "record btrace pt" to configure the kernel to use Intel(R) Processor Trace instead of Branch Trace Strore. The "record btrace" command chooses the tracing format automatically. Intel(R) Processor Trace support requires Linux 4.1 and libipt. gdb/ * NEWS: Announce new commands "record btrace pt" and "record pt". Announce new options "set|show record btrace pt buffer-size". * btrace.c: Include "rsp-low.h". Include "inttypes.h". (btrace_add_pc): Add forward declaration. (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback) (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt) (btrace_compute_ftrace_pt): New. (btrace_compute_ftrace): Support BTRACE_FORMAT_PT. (check_xml_btrace_version): Update version check. (parse_xml_raw, parse_xml_btrace_pt_config_cpu) (parse_xml_btrace_pt_raw, parse_xml_btrace_pt) (btrace_pt_config_cpu_attributes, btrace_pt_config_children) (btrace_pt_children): New. (btrace_children): Add support for "pt". (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New. (btrace_conf_children): Add support for "pt". * btrace.h: Include "intel-pt.h". (btrace_pt_error): New. * common/btrace-common.c (btrace_format_string, btrace_data_fini) (btrace_data_empty): Support BTRACE_FORMAT_PT. * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT. (struct btrace_config_pt): New. (struct btrace_config)<pt>: New. (struct btrace_data_pt_config, struct btrace_data_pt): New. (struct btrace_data)<pt>: New. * features/btrace-conf.dtd (btrace-conf)<pt>: New. (pt): New. * features/btrace.dtd (btrace)<pt>: New. (pt, pt-config, cpu): New. * nat/linux-btrace.c (perf_event_read, perf_event_read_all) (perf_event_pt_event_type, kernel_supports_pt) (linux_supports_pt): New. (linux_supports_btrace): Support BTRACE_FORMAT_PT. (linux_enable_bts): Free tinfo on error. (linux_enable_pt): New. (linux_enable_btrace): Support BTRACE_FORMAT_PT. (linux_disable_pt): New. (linux_disable_btrace): Support BTRACE_FORMAT_PT. (linux_fill_btrace_pt_config, linux_read_pt): New. (linux_read_btrace): Support BTRACE_FORMAT_PT. * nat/linux-btrace.h (struct btrace_tinfo_pt): New. (struct btrace_target_info)<pt>: New. * record-btrace.c (set_record_btrace_pt_cmdlist) (show_record_btrace_pt_cmdlist): New. (record_btrace_print_pt_conf): New. (record_btrace_print_conf): Support BTRACE_FORMAT_PT. (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT. (cmd_record_btrace_pt_start): New. (cmd_record_btrace_start): Support BTRACE_FORMAT_PT. (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New. (_initialize_record_btrace): Add new commands. * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New. (remote_protocol_features): Add "Qbtrace:pt". Add "Qbtrace-conf:pt:size". (remote_supports_btrace): Support BTRACE_FORMAT_PT. (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size. (remote_enable_btrace): Support BTRACE_FORMAT_PT. (_initialize_remote): Add new commands. gdbserver/ * linux-low.c: Include "rsp-low.h" (linux_low_encode_pt_config, linux_low_encode_raw): New. (linux_low_read_btrace): Support BTRACE_FORMAT_PT. (linux_low_btrace_conf): Support BTRACE_FORMAT_PT. (handle_btrace_enable_pt): New. (handle_btrace_general_set): Support "pt". (handle_btrace_conf_general_set): Support "pt:size". doc/ * gdb.texinfo (Process Record and Replay): Spell out that variables and registers are not available during btrace replay. Describe the new "record btrace pt" command. Describe the new "set|show record btrace pt buffer-size" options. (General Query Packets): Describe the new Qbtrace:pt and Qbtrace-conf:pt:size packets. Expand "bts" to "Branch Trace Store". Update the branch trace DTD.
2015-07-02configure: check for libiptMarkus Metzger1-0/+11
Check for libipt, an Intel(R) Processor Trace decoder library. The sources can be found on github at: https://github.com/01org/processor-trace gdb/ * configure.ac: Check for libipt * configure: Regenerate. * config.in: Regenerate. * Makefile.in (LIBIPT): New. (CLIBS): Add $LIBIPT. * NEWS: document new configure options
2015-06-26Add option to remove duplicate command history entriesPatrick Palka1-0/+4
This patch implements the new option "history remove-duplicates", which controls the removal of duplicate history entries ("off" by default). The motivation for this option is to be able to reduce the prevalence of basic commands such as "up" and "down" in the history file. These common commands crowd out more unique commands in the history file (when the history file has a fixed size), and they make navigation of the history file via ^P, ^N and ^R more inconvenient. The option takes an integer denoting the number of history entries to look back at for a history entry that is a duplicate of the latest one. "history remove-duplicates 1" is equivalent to bash's ignoredups option, and "history remove-duplicates unlimited" is equivalent to bash's erasedups option. [ I decided to go with this integer approach instead of a tri-state enum because it's slightly more flexible and seemingly more intuitive than leave/erase/ignore. ] gdb/ChangeLog: * NEWS: Mention the new option "history remove-duplicates". * top.c (history_remove_duplicates): New static variable. (show_history_remove_duplicates): New static function. (gdb_add_history): Conditionally remove duplicate history entries. (init_main): Add "history remove-duplicates" option. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Document the new option "history remove-duplicates". gdb/testsuite/ChangeLog: * gdb.base/history-duplicates.exp: New test.
2015-06-19Remove special support in gdb for Sun's version of stabs.Doug Evans1-0/+2
Discussion: https://sourceware.org/ml/gdb-patches/2015-05/msg00169.html gdb/ChangeLog: * NEWS: Mention Sun's version of stabs is no longer supported. * elfread.c (free_elfinfo): Delete. All uses updated. (elfstab_offset_sections): Delete. All uses updated. * gdb-stabs.h (stab_section_info): Delete. All uses updated. * psympriv.h (partial_symtab) <section_offsets>: Delete. All uses updated. * psymtab.c (start_psymtab_common): Delete arg section_offsets. All callers updated. gdb/doc/ChangeLog: * stabs.texinfo (ELF Linker Relocation): Mention Sun stabs is no longer supported.
2015-06-17Tweak the handling of $GDBHISTSIZE edge cases [PR gdb/16999]Patrick Palka1-1/+3
When GDB reads a nonsensical value for the GDBHISTSIZE environment variable, i.e. one that is non-numeric or negative, GDB then sets its history size to 0. This behavior is annoying and also inconsistent with the behavior of bash. This patch makes the behavior of invalid GDBHISTSIZE consistent with how bash handles HISTSIZE. When we encounter a null or out-of-range GDBHISTSIZE (outside of [0, INT_MAX]) we now set the history size to unlimited instead of 0. When we encounter a non-numeric GDBHISTSIZE we do nothing. gdb/ChangeLog: PR gdb/16999 * NEWS: Mention new GDBHISTSIZE behavior. * top.c (init_history): For null or out-of-range GDBHISTSIZE, set history size to unlimited. Ignore non-numeric GDBHISTSIZE. gdb/doc/ChangeLog: PR gdb/16999 * gdb.texinfo (Command History): Mention new GDBHISTSIZE behavior. gdb/testsuite/ChangeLog: PR gdb/16999 * gdb.base/gdbhistsize-history.exp: New test.
2015-06-17Read $GDBHISTSIZE instead of $HISTSIZEPatrick Palka1-0/+4
The HISTSIZE environment variable is generally expected to be read by shells, not by applications. Some distros for example globally export HISTSIZE in /etc/profile -- with the intention that it only affects shells -- and by doing so it renders useless GDB's own mechanism for setting the history size via .gdbinit. Also, annoyances may arise when HISTSIZE is not interpreted the same way by the shell and by GDB, e.g. PR gdb/16999. That can always be fixed on a shell-by-shell basis but it may be impossible to be consistent with the behavior of all shells at once. Finally it just makes sense to not confound shell environment variables with application environment variables. gdb/ChangeLog: * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE. * top.c (init_history): Read from GDBHISTSIZE instead of HISTSIZE. (init_main): Refer to GDBHISTSIZE instead of HISTSIZE. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Replace occurrences of HISTSIZE with GDBHISTSIZE. gdb/testsuite/ChangeLog: * gdb.base/gdbinit-history.exp: Replace occurrences of HISTSIZE with GDBHISTSIZE. * gdb.base/readline.exp: Likewise.
2015-06-13gdb: Rework command completion on 'tui reg'.Andrew Burgess1-0/+3
We previously specified a few known register groups for the 'tui reg' command. Other register groups could be accessed, but only by using the 'tui reg next' command and cycling through all the groups. This commit removes the hard coded sub-commands of 'tui reg' and instead adds dynamic completion of sub-commands based on the architecturally defined register groups, giving immediate access to all available register groups. There is still the 'next' and 'prev' commands for cycling through the register groups if that's wanted. The new code maintains the ability to only enter partial names for register groups, which is something we got for free when using the standard sub-command mechanism. The register (and register group) completer has been changed to use get_current_arch rather than using the architecture of the currently selected frame. When the target is running, this is equivalent, however, when the target is not running, using get_current_arch will provide results from the default architecture. gdb/ChangeLog: * completer.c: Add arch-utils.h include. (enum reg_completer_targets): New enum. (reg_or_group_completer_1): New function containing old reg_or_group_completer, add and use new parameter to control what is completed on. Use get_current_arch rather than architecture of currently selected frame. (reg_or_group_completer): Call new reg_or_group_completer_1. (reggroup_completer): Call new reg_or_group_completer_1. * completer.h (reggroup_completer): Add declaration. * tui/tui-regs.c: Add 'completer.h' include. (tui_reg_next_command): Renamed to... (tui_reg_next): ...this. Adjust parameters and return rather than display new group. (tui_reg_prev_command): Renamed to... (tui_reg_prev): ...this. Adjust parameters and return rather than display new group. (tui_reg_float_command): Delete. (tui_reg_general_command): Delete. (tui_reg_system_command): Delete. (tui_reg_command): Rewrite to perform switching of register group. Add header comment. (tuireglist): Remove. (tui_reggroup_completer): New function. (_initialize_tui_regs): Remove 'tui reg' sub-commands, update creation of 'tui reg' command. * NEWS: Add comment about 'tui reg' changes. gdb/doc/ChangeLog: * gdb.texinfo (TUI Commands): Bring all 'tui reg' commands into a single table entry.
2015-06-10Announce new container-awareness features for GNU/Linux systemsGary Benson1-0/+7
This commit announces the newly added ability to directly access executable and shared library files when attaching to processes running in containers on GNU/Linux systems. gdb/ChangeLog: * NEWS: Announce support for direct access of executable and shared library files when attaching to inferiors in containers on GNU/Linux systems.
2015-06-10Implement multiple-filesystem support for remote targetsGary Benson1-0/+6
This commit allows GDB to access executables and shared libraries on remote targets where the remote stub does not share a common filesystem with the inferior(s). A new packet "vFile:setfs" is added to the remote protocol and the three remote hostio functions with filename arguments are modified to send "vFile:setfs" packets as necessary. gdb/ChangeLog: * remote.c (struct remote_state) <fs_pid>: New field. (new_remote_state): Initialize the above. (PACKET_vFile_setfs): New enum value. (remote_hostio_set_filesystem): New function. (remote_hostio_open): Call the above. (remote_hostio_unlink): Likewise. (remote_hostio_readlink): Likewise. (_initialize_remote): Register new "set/show remote hostio-setfs-packet" command. * NEWS: Announce new vFile:setfs packet. gdb/doc/ChangeLog: * gdb.texinfo (Remote Configuration): Document the "set/show remote hostio-setfs-packet" command. (Host I/O Packets): Document the vFile:setfs packet.
2015-06-10Implement mount namespace support for native Linux targetsGary Benson1-0/+4
This commit allows GDB to access executables and shared libraries on native Linux targets where GDB and the inferior have different mount namespaces. gdb/ChangeLog: * linux-nat.c (nat/linux-namespaces.h): New include. (fileio.h): Likewise. (linux_nat_filesystem_is_local): New function. (linux_nat_fileio_pid_of): Likewise. (linux_nat_fileio_open): Likewise. (linux_nat_fileio_readlink): Likewise. (linux_nat_fileio_unlink): Likewise. (linux_nat_add_target): Initialize to_filesystem_is_local, to_fileio_open, to_fileio_readlink and to_fileio_unlink. (_initialize_linux_nat): New "set/show debug linux-namespaces" commands. * NEWS: Mention new "set/show debug linux-namespaces" commands. gdb/doc/ChangeLog: * gdb.texinfo (Debugging Output): Document the "set/show debug linux-namespaces" command.
2015-06-10Add support for bound table in the Intel MPX context.Walfred Tedeschi1-0/+4
Intel(R) Memory protection bound information are located in register to be tested using the MPX new instructions. Since the number of bound registers are limited a table is used to provide storage for bounds during run-time. In order to investigate the contents of the MPX bound table two new commands are added to GDB. "show mpx bound" and "set mpx bound" are used to display and set values on the MPX bound table. 2015-04-20 Walfred Tedeschi <walfred.tedeschi@intel.com> Mircea Gherzan <mircea.gherzan@intel.com> * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32, MPX_BT_MASK_32): New macros. (i386_mpx_set_bounds): New function that implements the command "set-mpx-bound". (i386_mpx_enabled) Helper function to test MPX availability. (i386_mpx_bd_base) Helper function to calculate the base directory address. (i386_mpx_get_bt_entry) Helper function to access a bound table entry. (i386_mpx_print_bounds) Effectively display bound information. (_initialize_i386_tdep): Qdd new commands to commands "set mpx" and "show mpx". (_initialize_i386_tdep): Add "bound" to the commands "show mpx" and "set mpx" commands. (mpx_set_cmdlist and mpx_show_cmdlist): list for the new prefixed "set mpx" and "show mpx" commands. * NEWS: List new commands for MPX support. testsuite: * gdb.arch/i386-mpx-map.c: New file. * gdb.arch/i386-mpx-map.exp: New File. doc: * gdb.texinfo (i386): Add documentation about "show mpx bound" and "set mpx bound".
2015-05-27Add set/show debug dwarf-line.Doug Evans1-0/+4
gdb/ChangeLog: * NEWS: Mention "set debug dwarf-line". * dwarf2read.c (dwarf_line_debug): New static global. (add_include_dir): Add debug dwarf-line support. (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto. (_initialize_dwarf2_read): New parameter "debug dwarf-line". gdb/doc/ChangeLog: * gdb.texinfo (Debugging Output): Mention set/show debug dwarf-line.
2015-05-26Rename dwarf2 to dwarf in "set debug" and maintenance commands.Doug Evans1-0/+20
gdb/ChangeLog: * NEWS: Add entries for command renamings. * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug. All uses updated. (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated. (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age. All uses updated. (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age. All callers updated. Fix spelling of DWARF in help text. (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist. All uses updated. (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist. All uses updated. (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated. (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated. (dwarf_always_disassemble): Renamed from dwarf_always_disassemble. All uses updated. (show_dwarf_always_disassemble): Renamed from show_dwarf2_always_disassemble. All callers updated. (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to "set/show dwarf max-cache-age". Rename "set/show dwarf2 always-disassemble" to "set/show dwarf always-disassemble". Rename "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename "set/show debug dwarf2-die" to "set/show debug dwarf-die". gdb/doc/ChangeLog: * gdb.texinfo (Debugging Output): Update for DWARF "set debug" command renamings. (Maintenance Commands): Update for DWARF "set debug" command renamings. gdb/testsuite/ChangeLog: * gdb.dwarf2/dw2-op-call.exp: Update. * gdb.dwarf2/dw4-sig-types.exp: Update. * gdb.dwarf2/implptr.exp: Update. * gdb.mi/mi-cmd-param-changed.exp: Update.
2015-05-26NEWS entry about aarch64-linux record/replay supportOmair Javaid1-0/+4
This patch adds the NEWS entry for aarch64-linux record replay support. It has been reviewed and approved. gdb: 2015-05-26 Omair Javaid <omair.javaid@linaro.org> * NEWS: Add a note on process record-replay support on aarch64*-linux* targets.
2015-05-22gdb: New 'tui enable' and 'tui disable' commands.Andrew Burgess1-0/+4
Add new commands to specifically enable and disable tui mode. This is in addition to the readline bindings, but might be easier for a user to discover if they accidentally end up in tui mode. gdb/ChangeLog: * NEWS: Mention 'tui enable' and 'tui disable'. * tui/tui.c (tui_enable_command): New function. (tui_disable_command): New function. (_initialize_tui): New function. gdb/doc/ChangeLog: * gdb.texinfo (TUI): Include 'tui enable' in the introduction. (TUI Commands): Add 'tui enable' and 'tui disable' details.
2015-05-16Add support for unbuffered and zero sized Guile ports.Doug Evans1-0/+4
gdb/ChangeLog * NEWS: Mention support for unbuffered Guile memory ports. * scm-ports.c (ioscm_memory_port): Update comments on end, size. (ioscm_lseek_address): Improve overflow calculation. (gdbscm_memory_port_fill_input): Add assert. (gdbscm_memory_port_write): Handle unbuffered ports. Handle large writes identical to Guile's fport_write. (gdbscm_memory_port_seek): Fix seeking past end check. (gdbscm_memory_port_close): Handle closing unbuffered port. (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports. (ioscm_init_memory_port): Handle unbuffered ports. (ioscm_reinit_memory_port): Ditto. (ioscm_init_memory_port): Update size calculation. (gdbscm_open_memory): Support zero sized ports. gdb/testsuite/ChangeLog * gdb.guile/scm-ports.c: New file. * gdb.guile/scm-ports.exp: Add memory port tests. gdb/doc/ChangeLog * guile.texi (Memory Ports in Guile): Document support for unbuffered memory ports.
2015-05-16compile: New 'compile print'Jan Kratochvil1-0/+3
It is planned the existing GDB command 'print' will be able to evaluate its expressions using the compiler. There will be some option to choose between the existing GDB evaluation and the compiler evaluation. But as an intermediate step this patch provides the expression printing feature as a new command. I can imagine it could be also called 'maintenance compile print' as in the future one should be able to use its functionality by the normal 'print' command. There was a discussion with Eli about the command name: https://sourceware.org/ml/gdb-patches/2015-03/msg00880.html As there were no other comments yet I haven't renamed it yet, before there is some confirmation about settlement on the final name. Support for the GDB '@' operator to create arrays has been submitted for GCC: [gcc patch] libcc1: '@' GDB array operator https://gcc.gnu.org/ml/gcc-patches/2015-03/msg01451.html gdb/ChangeLog 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com> Phil Muldoon <pmuldoon@redhat.com> * NEWS (Changes since GDB 7.9): Add compile print. * compile/compile-c-support.c (add_code_header, add_code_footer) (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE. * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE) (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE): New. * compile/compile-object-load.c: Include block.h. (get_out_value_type): New function. (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and OUT_VALUE_TYPE. * compile/compile-object-load.h (struct compile_module): Add fields out_value_addr and out_value_type. * compile/compile-object-run.c: Include valprint.h and compile.h. (struct do_module_cleanup): Add fields out_value_addr and out_value_type. (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE. (compile_object_run): Propagate out_value_addr and out_value_type. Pass OUT_VALUE_ADDR. * compile/compile.c: Include valprint.h. (compile_print_value, compile_print_command): New functions. (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE. (_initialize_compile): Update compile code help text. Install compile_print_command. * compile/compile.h (compile_print_value): New prototype. * defs.h (enum compile_i_scope_types): Add COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE. gdb/doc/ChangeLog 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.texinfo (Compiling and Injecting Code): Add compile print. gdb/testsuite/ChangeLog 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.compile/compile-print.c: New file. * gdb.compile/compile-print.exp: New file.
2015-05-13gdb/NEWS: Move "Xmethods can now specify a result type" to GDB 7.9.1 section.Joel Brobecker1-1/+6
As this change was ported to GDB 7.9.1, the NEWS entry is moved to a newly-created "Changes in GDB 7.9.1" section, matching the NEWS file which is going to be distributed with the GDB 7.9.1 release. gdb/ChangeLog: * NEWS: Create "Changes in GDB 7.9.1" section. Move news about Xmethods now being able to specify a result type to that new section.
2015-05-12Extended-remote fork event docsDon Breazeal1-0/+24
This patch contains the accumulated documentation changes for the rest of the extended-remote follow fork patchset. gdb/ChangeLog: * NEWS: Announce fork support in the RSP and support for fork debugging in extended mode. gdb/doc/ChangeLog: * gdb.texinfo (Forks): Note that fork debugging is supported in extended mode. (Remote Configuration): Add fork event features to table of packet settings. (Stop Reply Packets): Add fork events to list of stop reasons. (General Query Packets): Add fork events to tables of 'gdbfeatures' and 'stub features' supported in the qSupported packet, as well as to the list containing stub feature details.
2015-05-09[Python] Add methods reference_value and const_value to gdb.Value.Siva Chandra1-0/+3
gdb/ChangeLog: * NEWS (Python Scripting): Mention the new gdb.Value methods. * python/py-value.c (valpy_reference_value): New function. (valpy_const_value): Likewise. (value_object_methods): Add new methods. * value.c (make_cv_value): New function. * value.h (make_cv_value): Declare. gdb/doc/ChangeLog: * python.texi (Values From Inferior): Add descriptions of new methods gdb.Value.reference_value and gdb.Value.const_value. gdb/testsuite/ChangeLog: * gdb.python/py-xmethods.cc: Enhance test case. * gdb.python/py-xmethods.exp: New tests. * gdb.python/py-xmethods.py (A_indexoper): New xmethod worker function. (B_indexoper): Likewise. (global_dm_list) : Add new xmethod worker functions.
2015-05-06Make the "info dll" command available on all platform.Joel Brobecker1-0/+3
The "info dll", an alias of the "info sharedlibrary" command, is currently only defined in windows native versions. This patch makes it universally available by moving the alias declaration to solib.c, and adjusts the documentation accordingly. Making it universally available has two benefits: - Windows users moving to a Unix platforms are still able to use the same command for getting the list of shared libraries; - Unix to Windows cross debuggers now provide that command also. gdb/ChangeLog: * solib.c (_initialize_solib): Add "info dll" alias creation. * windows-nat.c (set_windows_aliases): Delete. (_initialize_windows_nat): Remove deprecated_init_ui_hook assignment. * NEWS: Add news entry about "info dll" now being available on all platforms. gdb/doc/ChangeLog: * gdb.texinfo (Files): Add "info dll" documentation. (Cygwin Native): Remove "info dll" documentation.
2015-04-29PR python/18285Doug Evans1-1/+1
gdb/ChangeLog: PR python/18285 * NEWS: Document new gdb.XMethodWorker.get_result_type method. * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle EVAL_AVOID_SIDE_EFFECTS for xmethods. * extension-priv.h (struct extension_language_ops) <get_xmethod_result_type>: New member. * extension.c (get_xmethod_result_type): New function. * extension.h (get_xmethod_result_type): Declare. * python/py-xmethods.c (get_result_type_method_name): New static global. (py_get_result_type_method_name): Ditto. (gdbpy_get_xmethod_result_type): New function. (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name. * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare. * python/python.c (python_extension_ops): Add gdbpy_get_xmethod_result_type. * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type. * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for xmethods. (value_x_unop): Ditto. * value.c (result_type_of_xmethod): New function. * value.h (result_type_of_xmethod): Declare. gdb/testsuite/ChangeLog: * gdb.python/py-xmethods.exp: Add ptype tests. * gdb.python/py-xmethods.py (E_method_char_worker): Add get_result_type method. gdb/doc/ChangeLog: * python.texi (Xmethod API) <gdb.XMethodWorker.get_result_type>: Document. (Writing an Xmethod): Add get_result_type to example.
2015-04-28Add gdb.Type.optimized_out method.Sasha Smundak1-0/+2
gdb/ChangeLog: * NEWS: Mention gdb.Type.optimized_out method. * python/py-type.c (typy_optimized_out): New function. gdb/doc/ChangeLog: * python.texi: New method documented. gdb/testsuite/ChangeLog: * gdb.python/py-type.exp: New test.
2015-04-27S390: Vector ABI supportAndreas Arnez1-0/+2
With the S390 vector ABI, vector registers are used for passing vector arguments and for returning a vector. Support this ABI in inferior function calls and when setting or retrieving a function's return value. gdb/ChangeLog: * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h". (enum s390_vector_abi_kind): New enum. (struct gdbarch_tdep)<vector_abi>: New field. (s390_effective_inner_type): Add parameter min_size. Stop unwrapping if the inner type is smaller than min_size. (s390_function_arg_float): Adjust call to s390_effective_inner_type. (s390_function_arg_vector): New function. (s390_function_arg_integer): Adjust comment. (struct s390_arg_state)<vr>: New field. (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector arguments according to vector ABI when appropriate. (s390_push_dummy_call): Initialize the argument state's field 'vr'. Adjust calls to s390_handle_arg. (s390_register_return_value): Handle vector return values. (s390_return_value): Apply the "register" return value convention to a vector when appropriate. (s390_gdbarch_init): Initialize tdep->vector_abi. * NEWS: Announce S390 vector ABI support.
2015-04-24gdb: Add support for dumping to verilog hex format.Andrew Burgess1-0/+2
Extend the gdb 'dump' command to allow creating output in verilog hex format. Add some tests to cover new functionality. As bfd does not currently support reading in verilog hex formats the tests only cover the 'dump' command, not the 'restore' command. gdb/ChangeLog: * cli/cli-dump.c (verilog_cmdlist): New variable. (dump_verilog_memory): New function. (dump_verilog_value): New function. (verilog_dump_command): New function. (_initialize_cli_dump): Add new commands to support verilog dump format. * NEWS: Add entry for "dump verilog". gdb/doc/ChangeLog: * gdb.texinfo (Dump/Restore Files): Add detail about verilog dump format. gdb/testsuite/ChangeLog: * gdb.base/dump.exp: Add *.verilog files to all_files list. Add new tests for verilog output.
2015-04-17Access executable from remote system when first inferior appearsGary Benson1-0/+6
This commit modifies remote_add_inferior to take an extra argument try_open_exec. If this is nonzero, remote_add_inferior will attempt to open this inferior's executable as the main executable if no main executable is open already. Callers are updated appropriately. With this commit, remote debugging can now be initiated using only a "target remote" or "target extended-remote" command; no "set sysroot" or "file" commands are required, e.g. bash$ gdb -q (gdb) target remote | gdbserver - /bin/sh Remote debugging using | gdbserver - /bin/sh Process /bin/sh created; pid = 32166 stdin/stdout redirected Remote debugging using stdio Reading symbols from target:/bin/bash... One testcase required updating as a result of this commit. The test checked that GDB's "info files" command does not crash if no main executable is open, and relied on GDB's inability to access the main executable over the remote protocol. The test was updated to inhibit this new behavior. gdb/ChangeLog: * remote.c (remote_add_inferior): New argument try_open_exec. If nonzero, attempt to open the inferior's executable file as the main executable if no main executable is open already. All callers updated. * NEWS: Mention that GDB now supports automatic location and retrieval of executable + files from remote targets. gdb/doc/ChangeLog: * gdb.texinfo (Connecting to a Remote Target): Mention that GDB can access program files from remote targets that support qXfer:exec-file:read and Host I/O packets. gdb/testsuite/ChangeLog: * gdb.server/server-exec-info.exp: Inhibit GDB from accessing the main executable over the remote protocol.
2015-04-17Implement remote_pid_to_exec_file using qXfer:exec-file:readGary Benson1-0/+4
This commit adds a new packet "qXfer:exec-file:read" to the remote protocol that can be used to obtain the pathname of the file that was executed to create a process on the remote system. Support for this packet is added to GDB and remote_ops.to_pid_to_exec_file is implemented using it. gdb/ChangeLog: * target.h (TARGET_OBJECT_EXEC_FILE): New enum value. * remote.c (PACKET_qXfer_exec_file): Likewise. (remote_protocol_features): Register the "qXfer:exec-file:read" feature. (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE. (remote_pid_to_exec_file): New function. (init_remote_ops): Initialize to_pid_to_exec_file. (_initialize_remote): Register new "set/show remote pid-to-exec-file-packet" command. * NEWS: Announce new qXfer:exec-file:read packet. gdb/doc/ChangeLog: * gdb.texinfo (Remote Configuration): Document the "set/show remote pid-to-exec-file-packet" command. (General Query Packets): Document the qXfer:exec-file:read qSupported features. Document the qXfer:exec-file:read packet.
2015-04-17Use gdb_sysroot for main executable on attachGary Benson1-0/+5
This commit updates exec_file_locate_attach to use exec_file_find to compute the full pathname of the main executable in some cases. The net effect of this is that the main executable's path will be prefixed with gdb_sysroot in the same way that shared library paths currently are. gdb/ChangeLog: * exec.c (solist.h): New include. (exec_file_locate_attach): Prefix absolute executable paths with gdb_sysroot if set. * NEWS: Mention that executable paths may be prepended with sysroot. gdb/doc/ChangeLog: * gdb.texinfo (set sysroot): Document that "set sysroot" also applies to executable paths if supplied to GDB as absolute.
2015-04-11Remove --xdbJan Kratochvil1-0/+4
Pedro Alves: The commands that enables aren't even documented in the manual. Judging from that, I assume that only wdb users would ever really be using the --xdb switch. I think it's time to drop "support" for the --xdb switch too. I looked through the commands that that exposes, the only that looked potentially interesting was "go", but then it's just an alias for "tbreak+jump", which can easily be done with "define go...end". I'd rather free up the "go" name for something potentially more interesting (either run control, or maybe even unrelated, e.g., for golang). gdb/ChangeLog 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com> * NEWS (Changes since GDB 7.9): Add removed -xdb. * breakpoint.c (command_line_is_silent): Remove xdb_commands conditional. (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba and lb. * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and va. * cli/cli-decode.c (find_command_name_length): Remove xdb_commands conditional. * defs.h (xdb_commands): Remove declaration. * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc. * guile/scm-cmd.c (command_classes): Remove xdb from comment. * infcmd.c (run_no_args_command, go_command): Remove. (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr. * infrun.c (xdb_handle_command): Remove. (_initialize_infrun): Remove xdb_commands for lz and z. * main.c (xdb_commands): Remove variable. (captured_main): Remove "xdb" from long_options. (print_gdb_help): Remove --xdb from help. * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment. * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?. * stack.c (backtrace_full_command, args_plus_locals_info) (current_frame_command): Remove. (_initialize_stack): Remove xdb_commands for t, T and l. * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg. * thread.c (_initialize_thread): Remove xdb_commands condition. * tui/tui-layout.c (tui_toggle_layout_command) (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove. (_initialize_tui_layout): Remove xdb_commands for td and ts. * tui/tui-regs.c (tui_scroll_regs_forward_command) (tui_scroll_regs_backward_command): Remove. (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r. * tui/tui-win.c (tui_xdb_set_win_height_command): Remove. (_initialize_tui_win): Remove xdb_commands for U and w. * utils.c (pagination_on_command, pagination_off_command): Remove. (initialize_utils): Remove xdb_commands for am and sm. gdb/doc/ChangeLog 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.texinfo (Mode Options): Remove -xdb.
2015-04-02Document "target:" sysroot changesGary Benson1-0/+7
This commit documents the newly added "target:" sysroot feature. gdb/ChangeLog: * NEWS: Announce the new default sysroot of "target:". gdb/doc/ChangeLog: * gdb.texinfo (set sysroot): Document "target:".
2015-04-01Add support for writing unwinders in Python.Sasha Smundak1-0/+1
gdb/ChangeLog: * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o. (SUBDIR_PYTHON_SRCS): Add py-unwind.c. (py-unwind.o): New recipe. * NEWS: mention Python frame unwinding. * data-directory/Makefile.in (PYTHON_FILE_LIST): Add gdb/unwinder.py and gdb/command/unwinder.py * python/lib/gdb/__init__.py (packages): Add frame_unwinders list. (execute_unwinders): New function. * python/lib/gdb/command/unwinders.py: New file. * python/lib/gdb/unwinder.py: New file. * python/py-objfile.c (objfile_object): Add frame_unwinders field. (objfpy_dealloc): Decrement frame_unwinders reference count. (objfpy_initialize): Create frame_unwinders list. (objfpy_get_frame_unwinders): New function. (objfpy_set_frame_unwinders): Ditto. (objfile_getset): Add frame_unwinders attribute to Objfile. * python/py-progspace.c (pspace_object): Add frame_unwinders field. (pspy_dealloc): Decrement frame_unwinders reference count. (pspy_initialize): Create frame_unwinders list. (pspy_get_frame_unwinders): New function. (pspy_set_frame_unwinders): Ditto. (pspy_getset): Add frame_unwinders attribute to gdb.Progspace. * python/py-unwind.c: New file. * python/python-internal.h (pspy_get_name_unwinders): New prototype. (objpy_get_frame_unwinders): New prototype. (gdbpy_initialize_unwind): New prototype. * python/python.c (gdbpy_apply_type_printers): Call gdbpy_initialize_unwind. gdb/doc/ChangeLog: * doc/python.texi (Writing a Frame Unwinder in Python): Add section. gdb/testsuite/ChangeLog: * gdb.python/py-unwind-maint.c: New file. * gdb.python/py-unwind-maint.exp: New test. * gdb.python/py-unwind-maint.py: New file. * gdb.python/py-unwind.c: New file. * gdb.python/py-unwind.exp: New test. * gdb.python/py-unwind.py: New test.
2015-03-31Implement support for checking /proc/PID/coredump_filterSergio Durigan Junior1-0/+9
This patch, as the subject says, extends GDB so that it is able to use the contents of the file /proc/PID/coredump_filter when generating a corefile. This file contains a bit mask that is a representation of the different types of memory mappings in the Linux kernel; the user can choose to dump or not dump a certain type of memory mapping by enabling/disabling the respective bit in the bit mask. Currently, here is what is supported: bit 0 Dump anonymous private mappings. bit 1 Dump anonymous shared mappings. bit 2 Dump file-backed private mappings. bit 3 Dump file-backed shared mappings. bit 4 (since Linux 2.6.24) Dump ELF headers. bit 5 (since Linux 2.6.28) Dump private huge pages. bit 6 (since Linux 2.6.28) Dump shared huge pages. (This table has been taken from core(5), but you can also read about it on Documentation/filesystems/proc.txt inside the Linux kernel source tree). The default value for this file, used by the Linux kernel, is 0x33, which means that bits 0, 1, 4 and 5 are enabled. This is also the default for GDB implemented in this patch, FWIW. Well, reading the file is obviously trivial. The hard part, mind you, is how to determine the types of the memory mappings. For that, I extended the code of gdb/linux-tdep.c:linux_find_memory_regions_full and made it rely *much more* on the information gathered from /proc/<PID>/smaps. This file contains a "verbose dump" of the inferior's memory mappings, and we were not using as much information as we could from it. If you want to read more about this file, take a look at the proc(5) manpage (I will also write a blog post soon about everything I had to learn to get this patch done, and when I it is ready I will post it here). With Oleg Nesterov's help, we could improve the current algorithm for determining whether a memory mapping is anonymous/file-backed, private/shared. GDB now also respects the MADV_DONTDUMP flag and does not dump the memory mapping marked as so, and will always dump "[vsyscall]" or "[vdso]" mappings (just like the Linux kernel). In a nutshell, what the new code is doing is: - If the mapping is associated to a file whose name ends with " (deleted)", or if the file is "/dev/zero", or if it is "/SYSV%08x" (shared memory), or if there is no file associated with it, or if the AnonHugePages: or the Anonymous: fields in the /proc/PID/smaps have contents, then GDB considers this mapping to be anonymous. There is a special case in this, though: if the memory mapping is a file-backed one, but *also* contains "Anonymous:" or "AnonHugePages:" pages, then GDB considers this mapping to be *both* anonymous and file-backed, just like the Linux kernel does. What that means is simple: this mapping will be dumped if the user requested anonymous mappings *or* if the user requested file-backed mappings to be present in the corefile. It is worth mentioning that, from all those checks described above, the most fragile is the one to see if the file name ends with " (deleted)". This does not necessarily mean that the mapping is anonymous, because the deleted file associated with the mapping may have been a hard link to another file, for example. The Linux kernel checks to see if "i_nlink == 0", but GDB cannot easily do this check (as it has been discussed, GDB would need to run as root, and would need to check the contents of the /proc/PID/map_files/ directory in order to determine whether the deleted was a hardlink or not). Therefore, we made a compromise here, and we assume that if the file name ends with " (deleted)", then the mapping is indeed anonymous. FWIW, this is something the Linux kernel could do better: expose this information in a more direct way. - If we see the flag "sh" in the VmFlags: field (in /proc/PID/smaps), then certainly the memory mapping is shared (VM_SHARED). If we have access to the VmFlags, and we don't see the "sh" there, then certainly the mapping is private. However, older Linux kernels (see the code for more details) do not have the VmFlags field; in that case, we use another heuristic: if we see 'p' in the permission flags, then we assume that the mapping is private, even though the presence of the 's' flag there would mean VM_MAYSHARE, which means the mapping could still be private. This should work OK enough, however. Finally, it is worth mentioning that I added a new command, 'set use-coredump-filter on/off'. When it is 'on', it will read the coredump_filter' file (if it exists) and use its value; otherwise, it will use the default value mentioned above (0x33) to decide which memory mappings to dump. gdb/ChangeLog: 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Oleg Nesterov <oleg@redhat.com> PR corefiles/16092 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'. New enum identifying the various options of the coredump_filter file. (struct smaps_vmflags): New struct. (use_coredump_filter): New variable. (decode_vmflags): New function. (mapping_is_anonymous_p): Likewise. (dump_mapping_p): Likewise. (linux_find_memory_regions_full): New variables 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'. Removed variable 'modified'. Read /proc/<PID>/smaps file; improve parsing of its information. Implement memory mapping filtering based on its contents. (show_use_coredump_filter): New function. (_initialize_linux_tdep): New command 'set use-coredump-filter'. * NEWS: Mention the possibility of using the '/proc/PID/coredump_filter' file when generating a corefile. Mention new command 'set use-coredump-filter'. gdb/doc/ChangeLog: 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com> PR corefiles/16092 * gdb.texinfo (gcore): Mention new command 'set use-coredump-filter'. (set use-coredump-filter): Document new command. gdb/testsuite/ChangeLog: 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com> PR corefiles/16092 * gdb.base/coredump-filter.c: New file. * gdb.base/coredump-filter.exp: Likewise.
2015-03-31Add cpu information to the info os command on linux.Antoine Tremblay1-0/+4
This patch adds cpu information on linux based on /proc/cpuinfo as : cpus Listing of all cpus/cores on the system This patch also reorders the info os commands so that they are listed in alphabetical order. gdb/ChangeLog: * NEWS: Mention info os cpus support. * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function. (struct osdata_type): Add cpus entry, reorder the entries in alphabetical order. gdb/doc/ChangeLog: * gdb.texinfo (Operating System Auxiliary Information): Add info os cpus documentation, reorder the info os entries in alphabetical order.
2015-03-23GDB: Add set/show serial parity command.Yury Grechishchev1-0/+4
The "set serial parity" command allows the user to control which parity to use when communicating over a serial connection, rather than having the parity hardcoded to none. gdb/ChangeLog: * NEWS: Mention set/show serial parity command. * monitor.c (monitor_open): Call serial_setparity. * remote.c (remote_open_1): Likewise. * ser-base.c (ser_base_serparity): New function. * ser-base.h (ser_base_setparity): Add declaration. * ser-go32.c (dos_ops): Set "setparity" field. * ser-mingw.c (ser_windows_raw): Do not set state.fParity and state.Parity. (ser_windows_setparity): New function. (hardwire_ops): Add ser_windows_setparity. (tty_ops): Add NULL for setparity field. (pipe_ops): Add ser_base_setparity. (tcp_ops): Likewise. * ser-pipe.c (pipe_ops): Likewise. * ser-tcp.c (tcp_ops): Likewise. * ser-unix.c (hardwire_setparity): Add declaration. (hardwire_raw): Don't reset PARENB flag. (hardwire_setparity): New function. (hardwire_ops): Add hardwire_setparity. * serial.c (serial_setparity): New function. (serial_parity): New global. (parity_none, parity_odd, parity_even, parity_enums, parity): New static globals. (set_parity): New function. (_initialize_serial): Add set/show serial parity commands. * serial.h (GDBPARITY_NONE): Define. (GDBPARITY_ODD): Define. (GDBPARITY_EVEN): Define. (serial_setparity) Add declaration. (struct serial_ops): Add setparity field. * target.h (serial_parity): Add declaration. gdb/doc/ChangeLog: * gdb.texinfo (Remote configuration): Document "set/show serial parity" command.
2015-03-14NEWS: Remove HPUXJan Kratochvil1-0/+5
gdb/ChangeLog 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * NEWS: New Removed targets and native configurations.
2015-03-11Implement remote_bfd_iovec_statGary Benson1-0/+3
This commit adds a new packet "vFile:fstat:" to the remote protocol that can be used by to retrieve information about files that have been previously opened using vFile:open. vFile:fstat: support is added to GDB, and remote_bfd_iovec_stat is implemented using it. If vFile:fstat: is not supported by the remote GDB creates a dummy result by zeroing the supplied stat structure and setting its st_size field to INT_MAX. This mimics GDB's previous behaviour, with the exception that GDB did not previously zero the structure so all other fields would have been returned unchanged, which is to say very likely populated with random values from the stack. gdb/ChangeLog: * remote-fileio.h (remote_fileio_to_host_stat): New declaration. * remote-fileio.c (remote_fileio_to_host_uint): New function. (remote_fileio_to_host_ulong): Likewise. (remote_fileio_to_host_mode): Likewise. (remote_fileio_to_host_time): Likewise. (remote_fileio_to_host_stat): Likewise. * remote.c (PACKET_vFile_fstat): New enum value. (remote_protocol_features): Register the "vFile:fstat" feature. (remote_hostio_fstat): New function. (remote_bfd_iovec_stat): Use the above. (_initialize_remote): Register new "set/show remote hostio-fstat-packet" command. * symfile.c (separate_debug_file_exists): Update comment. * NEWS: Announce new vFile:fstat packet. gdb/doc/ChangeLog: * gdb.texinfo (Remote Configuration): Document the "set/show remote hostio-fstat-packet" command. (General Query Packets): Document the vFile:fstat qSupported features. (Host I/O Packets): Document the vFile:fstat packet.
2015-03-04remote+docs: software/hardware breakpoint trapsPedro Alves1-0/+10
This adjusts target remote to tell the core whether a trap was caused by a breakpoint. To that end, the patch teaches GDB about new RSP stop reasons "T05 swbreak" and "T05 hwbreak", that remote targets report back to GDB, similarly to how "T05 watch" indicates a stop caused by a watchpoint. Because targets that can report these events are expected to themselves adjust the PC after a software breakpoint, these new stop reasons must only be reported if the stub is talking to a GDB that understands them. Because of that, the use of the new stop reasons needs to be handshaked on initial connection, using the qSupported mechanism. GDB simply sends "swbreak+" in its qSupports query, and the stub reports back "swbreak+" too. Because these new stop reasons are required to fix a fundamental non-stop mode problem, this commit extends the remote non-stop intro section in the manual, documenting the events as required. To be clear, GDB will still cope with remote targets that don't support these new stop reasons; it will behave just like today. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons. * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>: Delete field. <stop_reason>: New field. (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values. (packet_set_cmd_state): New function. (remote_protocol_features): Register the "swbreak" and "hwbreak" features. (remote_query_supported): If not disabled with the corresponding "set remote foo-packet" command, report support for the swbreak and hwbreak features. (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete field. <stop_reason>: New field. (remote_parse_stop_reply): Handle "swbreak" and "hwbreak". (remote_wait_as): Adjust. (remote_stopped_by_sw_breakpoint) (remote_supports_stopped_by_sw_breakpoint) (remote_stopped_by_hw_breakpoint) (remote_supports_stopped_by_hw_breakpoint): New functions. (remote_stopped_by_watchpoint): New function. (init_remote_ops): Install them. (_initialize_remote): Register new "set/show remote swbreak-feature-packet" and "set/show remote swbreak-feature-packet" commands. gdb/doc/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * gdb.texinfo (Remote Configuration): Document the "set/show remote swbreak-feature-packet" and "set/show remote hwbreak-feature-packet" commands. (Packets) <Z0>: Add cross link to the "swbreak" stop reason's decription. (Stop Reply Packets): Document the swbreak and hwbreak stop reasons. (General Query Packets): Document the swbreak and hwbreak qSupported features. (Remote Non-Stop): Explain that swbreak and hwbreak are required.
generated by cgit v1.1 at 2025-01-10 21:36:14 +0000