aboutsummaryrefslogtreecommitdiff
path: root/gdb/Makefile.in
AgeCommit message (Collapse)AuthorFilesLines
2019-10-23Fix opcodes includesTom Tromey1-1/+5
Now that gdb can unconditionally use a -I pointing at the top of the source tree, we can remove the ugly "../opcodes/" formulation that was needed earlier. This patch adds the -I and cleans up these includes. gdb/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * arc-tdep.c: Remove ".." from include. * frv-tdep.c: Remove ".." from include. * lm32-tdep.c: Remove ".." from include. * microblaze-tdep.c: Remove ".." from include. * or1k-tdep.h: Remove ".." from include. * s12z-tdep.c: Remove ".." from include. * Makefile.in (OPCODES_CFLAGS): Add comment. (TOP_CFLAGS): New variable. (INTERNAL_CFLAGS_BASE): Add TOP_CFLAGS. Change-Id: I21428726d55f9fab0c9da90b56f6664f258cf91a
2019-10-23Move readline to the readline/readline subdirectoryTom Tromey1-2/+2
readline turns out to be a bit of a stumbling block for the project to move gdbsupport (and then gdbserver) to the top-level. The issue is that readline headers are intended to be included with names like "readline/readline.h". To support this, gdb effectively adds a -I option pointing to the top-level source directory -- but, importantly, this option is not used when the system readline is used. For gdbsupport, a -I option like this would always be needed, but that in turn would break the system readline case. This was PR build/17077, fixed in commit a8a5dbcab8df0b3a9e04745d4fe8d64740acb323. Previously, we had discussed this on the gdb-patches list in terms of removing readline from the tree https://sourceware.org/ml/gdb-patches/2019-09/msg00317.html However, Eli expressed some concerns, and Joel did as well (off-list). Given those concerns, and the fact that a patch-free local readline is relatively new in gdb (it was locally patched for years), I changed my mind and decided to handle this situation by moving the readline sources down a level. That is, upstream readline is now in readline/readline, and the top-level readline directory just contains the minimal configury needed to build that. This fixes the problem because, when gdb unconditionally adds a -I$(top_srcdir), this will not find readline headers. A separate -I will be needed instead, which is exactly what's needed for --with-system-readline. gdb/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * Makefile.in (READLINE_DIR): Update. gdb/doc/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * Makefile.in (READLINE_DIR): Update. readline/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> Move old contents to readline/ subdirectory. * aclocal.m4, configure, configure.ac, .gitignore, Makefile.am, Makefile.in, README: New files. Change-Id: Ice156a2ee09ea68722b48f64d97146d7428ea9e4
2019-10-22Use libxxhash for hashing, if presentChristian Biesinger1-2/+6
XXHash is faster than htab_hash_string: ------------------------------------------------------------ Benchmark Time CPU Iterations ------------------------------------------------------------ BM_xxh3 11 ns 11 ns 65887249 BM_xxh32 19 ns 19 ns 36511877 BM_xxh64 16 ns 16 ns 42964585 BM_hash_string 182 ns 182 ns 3853125 BM_iterative_hash 77 ns 77 ns 9087638 Unfortunately, XXH3 is still experimental (see https://github.com/Cyan4973/xxHash#user-content-new-experimental-hash-algorithm) However, regular XXH64 is still a lot faster than htab_hash_string per my benchmark above. I used the following string for the benchmark: static constexpr char str[] = "_ZZZL13make_gdb_typeP7gdbarchP10tdesc_typeEN16gdb_type_creator19make_gdb_type_flagsEPK22tdesc_type_with_fieldsE19__PRETTY_FUNCTION__"; htab_hash_string is currently 4.35% + 7.98% (rehashing) of gdb startup when attaching to Chrome's content_shell. An additional 5.21% is spent in msymbol_hash, which does not use this hash function. Unfortunately, since it has to lowercase the string, it can't use this hash function. BM_msymbol_hash 52 ns 52 ns 13281495 It may be worth investigating if strlen+XXHash is still faster than htab_hash_string, which would make it easier to use in more places. Debian ships xxhash as libxxhash{0,-dev}. Fedora ships it as xxhash-devel. gdb/ChangeLog: 2019-10-22 Christian Biesinger <cbiesinger@google.com> * Makefile.in: Link with libxxhash. * config.in: Regenerate. * configure: Regenerate. * configure.ac: Search for libxxhash. * utils.c (fast_hash): Use xxhash if present. Change-Id: Icab218388b9f829522ed3977f04301ae6d4fc4ca
2019-10-21Fix creation of nm.h when configure is changedTom Tromey1-2/+7
My earlier patch -- commit c5adaa192 ("Fix creation of stamp-h by gdb's configure script") -- broke the creation of nm.h. In particular, configure removes nm.h, so if you touch configure and rebuild, nothing will re-create the link, breaking the build. This patch fixes the bug, and also updates configure.ac to use AC_CONFIG_LINKS, rather than the obsolete AC_LINK_FILES. Finally, I noticed that gcore is in generated_files in the Makefile.in. I think this is incorrect, as generated_files is only needed for files that can be the target of a #include. So, this patch removes it. gdb/ChangeLog 2019-10-21 Tom Tromey <tom@tromey.com> * configure.ac (nm.h): Conditionally create nm.h link. Subst NM_H. Use AC_CONFIG_LINKS. * configure: Rebuild. * Makefile.in (NM_H): New variable. (generated_files): Add NM_H. Remove gcore. (nm.h, stamp-nmh): New targets. Change-Id: I8dd539785d52455e85389425e4bb996c8a127a0e
2019-10-17Fix creation of stamp-h by gdb's configure scriptTom Tromey1-15/+3
I happened to notice that "make" would always print: CONFIG_HEADERS=config.h:config.in \ CONFIG_COMMANDS="default depdir" \ CONFIG_FILES= \ CONFIG_LINKS= \ /bin/sh config.status config.status: creating config.h config.status: config.h is unchanged on every rebuild. This seems to have changed due to an autoconf upgrade at some point in the past. In the autoconf gdb uses now, it works to use AC_CONFIG_HEADERS and then create the stamp file via the "commands" argument. This patch also fixes up Makefile.in to use the new-style config.status invocation. It's no longer necessary to pass the output file names via environment variables. gdb/ChangeLog 2019-10-17 Tom Tromey <tromey@adacore.com> * configure: Rebuild. * configure.ac: Use AC_CONFIG_HEADERS. Create stamp-h there, not in AC_CONFIG_FILES invocation. * Makefile.in (Makefile, data-directory/Makefile, stamp-h): Use new-style config.status invocation. gdb/gdbserver/ChangeLog 2019-10-17 Tom Tromey <tromey@adacore.com> * configure: Rebuild. * configure.ac: Use AC_CONFIG_HEADERS. Create stamp-h there, not in AC_CONFIG_FILES invocation. * Makefile.in (stamp-h, Makefile): Use new-style config.status invocation. Change-Id: Ia0530d1c5b9756812d29ddb8dc1062326155e61e
2019-10-16Create xml-builtin.h to declare xml_builtinsChristian Biesinger1-0/+1
xml-builtin.c only has character arrays and no dependencies, so this creates a simple header file for that purpose so that gdbserver can include that instead of re-declaring xml_builtin. Despite the name, feature_to_c.sh is already specific to xml_builtins (it hardcodes the variable name), so making it always output the include for xml-builtin.h seems fine. gdb/ChangeLog: 2019-10-16 Christian Biesinger <cbiesinger@google.com> * Makefile.in: Add xml-builtin.h. * features/feature_to_c.sh: Add an include for xml-builtin.h to ensure that the compiler checks that the types match. * xml-builtin.h: New file. * xml-support.c (fetch_xml_builtin): Add missing const. * xml-support.h: Remove declaration of xml_builtins. gdb/gdbserver/ChangeLog: 2019-10-16 Christian Biesinger <cbiesinger@google.com> * server.c: Include xml-builtin.h. (get_xml_features): Don't declare xml_builtins here. Change-Id: I806ef0851c43ead90b545a11794e41f5e5178436
2019-10-15gdb: Remove vec.{c,h} and update code to not include vec.hAndrew Burgess1-2/+0
Removes vec.c and vec.h from the source tree, and remove all the remaining includes of vec.h. There should be no user visible changes after this commit. I did have a few issues rebuilding GDB after applying this patch due to cached dependencies, I found that running this command in the build directory resolved my build issues without requiring a 'make clean': rm -fr gdb/gdbserver/gdbsupport/.deps/ gdb/ChangeLog: * Makefile.in: Remove references to vec.h and vec.c. * aarch64-tdep.c: No longer include vec.h. * ada-lang.c: Likewise. * ada-lang.h: Likewise. * arm-tdep.c: Likewise. * ax.h: Likewise. * breakpoint.h: Likewise. * charset.c: Likewise. * cp-support.h: Likewise. * dtrace-probe.c: Likewise. * dwarf2read.c: Likewise. * extension.h: Likewise. * gdb_bfd.c: Likewise. * gdbsupport/gdb_vecs.h: Likewise. * gdbsupport/vec.c: Remove. * gdbsupport/vec.h: Remove. * gdbthread.h: Likewise. * guile/scm-type.c: Likewise. * inline-frame.c: Likewise. * machoread.c: Likewise. * memattr.c: Likewise. * memrange.h: Likewise. * namespace.h: Likewise. * nat/linux-btrace.h: Likewise. * osdata.c: Likewise. * parser-defs.h: Likewise. * progspace.h: Likewise. * python/py-type.c: Likewise. * record-btrace.c: Likewise. * rust-exp.y: Likewise. * solib-target.c: Likewise. * stap-probe.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.h: Likewise. * varobj.c: Likewise. * varobj.h: Likewise. * xml-support.h: Likewise. gdb/gdbserver/ChangeLog: * Makefile.in: Remove references to vec.c. Change-Id: I0c91d7170bf1b5e992a387fcd9fe4f2abe343bb5
2019-10-07gdb: CTF supportWeimin Pan1-2/+7
This patch adds the CTF (Compact Ansi-C Type Format) support in gdb. Two submissions on which this gdb work depends were posted earlier in May: * On the binutils mailing list - adding libctf which creates, updates, reads, and manipulates the CTF data. * On the gcc mailing list - expanding gcc to directly emit the CFT data with a new command line option -gt. CTF is a reduced form of debugging information whose main purpose is to describe the type of C entities such as structures, unions, typedefs and function arguments at the global scope only. It does not contain debug information about source lines, location expressions, or local variables. For more information on CTF, see the documentation in the libdtrace-ctf source tree, available here: <https://raw.githubusercontent.com/oracle/libdtrace-ctf/master/doc/ctf-format>. This patch expands struct elfinfo by adding the .ctf section, which contains CTF debugging info, and modifies elf_symfile_read() to read it. If both DWARF and CTF exist in a program, only DWARF will be read. CTF data will be read only when there is no DWARF. The two-stage symbolic reading and setting strategy, partial and full, was used. File ctfread.c contains functions to transform CTF data into gdb's internal symbol table structures by iterately reading entries from CTF sections of "data objects", "function info", "variable info", and "data types" when setting up either partial or full symbol table. If the ELF symbol table is available, e.g. not stripped, the CTF reader will associate the found type information with these symbol entries. Due to the proximity between DWARF and CTF (CTF being a much simplified subset of DWARF), some DWARF implementation was reused to support CTF. Test cases ctf-constvars.exp, ctf-cvexpr.exp, ctf-ptype.exp, and ctf-whatis.exp have been added to verify the correctness of this support. This patch has missing features and limitations which we will add and address in the future patches. gdb/ChangeLog +2019-10-07 Weimin Pan <weimin.pan@oracle.com> + + * gdb/ctfread.c: New file. + * gdb/ctfread.h: New file. + * gdb/elfread.c: Include ctfread.h. + (struct elfinfo text_p): New member ctfsect. + (elf_locate_sections): Mark CTF section. + (elf_symfile_read): Call elfctf_build_psymtabs. + * gdb/Makefile.in (LIBCTF): Add. + (CLIBS): Use it. + (CDEPS): Likewise. + (DIST): Add ctfread.c. + * Makefile.def (dependencies): Add all-libctf to all-gdb + * Makefile.in: Add "all-gdb: maybe-all-libctf" + gdb/testsuite/ChangeLog +2019-10-07 Weimin Pan <weimin.pan@oracle.com> + + * gdb.base/ctf-whatis.exp: New file. + * gdb.base/ctf-whatis.c: New file. + * gdb.base/ctf-ptype.exp: New file. + * gdb.base/ctf-ptype.c: New file. + * gdb.base/ctf-constvars.exp: New file. + * gdb.base/ctf-constvars.c: New file. + * gdb.base/ctf-cvexpr.exp: New file. +
2019-10-07Renaming of ctf (the trace format) filesWeimin Pan1-2/+2
2019-10-02Fix type of startup_with_shell in gdbserverTom Tromey1-0/+1
startup_with_shell was changed to be of "bool" type, but I noticed that the definition in gdbserver disagreed. This disagreement caused some regressions on a big-endian machine. This patch removes the redundant declaration and definition of startup_with_shell and ensures that such clashes will be diagnosed. This moves the declaration to common-inferior.h, and introduces a new common-inferior.c, as suggested by Pedro. gdb/ChangeLog 2019-10-02 Tom Tromey <tromey@adacore.com> * Makefile.in (COMMON_SFILES): Add common-inferior.c. * gdbsupport/common-inferior.c: New file. * infcmd.c (startup_with_shell): Don't define. * nat/fork-inferior.h (startup_with_shell): Don't declare. * gdbsupport/common-inferior.h (startup_with_shell): Declare. * inferior.h (startup_with_shell): Don't declare. gdb/gdbserver/ChangeLog 2019-10-02 Tom Tromey <tromey@adacore.com> * Makefile.in (SFILES): Add common-inferior.c. (OBS): Add common-inferior.o. * server.c (startup_with_shell): Don't define.
2019-09-26Remove gdb_usleep.cTom Tromey1-2/+0
I noticed that gdb_usleep is unused, so this patch removes it. gdb/ChangeLog 2019-09-26 Tom Tromey <tom@tromey.com> * Makefile.in (COMMON_SFILES): Remove gdb_usleep.c. (HFILES_NO_SRCDIR): Remove gdb_usleep.h. * gdb_usleep.h: Remove. * gdb_usleep.c: Remove. * utils.c: Don't include gdb_usleep.h.
2019-09-20Remove Cell Broadband Engine debugging supportUlrich Weigand1-9/+0
This patch implements removal of Cell/B.E. support, including - Support for the spu-*-* target - Support for native stand-alone SPU debugging - Support for integrated debugging of combined PPU/SPU applications - Remote debugging (gdbserver) support for all the above. The patch also removes the TARGET_OBJECT_SPU target object type, as this is available only on Cell/B.E. targets, including - Native Linux support - Core file support (including core file generation) - Remote target support, including removal of the qXfer:spu:read and qXfer:spu:write remote protocal packets and associated support in gdbserver. gdb/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * NEWS: Mention that Cell/B.E. debugging support was removed. * MAINTAINERS: Remove spu target. * config/djgpp/fnchange.lst: Remove entries for removed files. * Makefile.in (ALL_TARGET_OBS): Remove solib-spu.o, spu-multiarch.o, and spu-tdep.o. (HFILES_NO_SRCDIR): Remove solib-spu.h and spu-tdep.h. (ALLDEPFILES): Remove solib-spu.c, spu-linux-nat.c, spu-multiarch.c, and spu-tdep.c. * spu-linux-nat.c: Remove file. * spu-multiarch.c: Remove file. * spu-tdep.c: Remove file. * spu-tdep.h: Remove file. * solib-spu.c: Remove file. * solib-spu.h: Remove file. * configure.host (powerpc64*-*-linux*): Remove Cell/B.E. support. * configure.nat (spu-linux): Remove. * configure.tgt (powerpc*-*-linux*): Remove solib-spu.o and solib-multiarch.o from gdb_target_obs. (spu*-*-*): Remove. * arch/ppc-linux-common.h (struct ppc_linux_features): Remove "cell" feature flag. (ppc_linux_no_features): Update. * arch/ppc-linux-common.c (ppc_linux_match_description): Remove Cell/B.E. support. * arch/ppc-linux-tdesc.h (tdesc_powerpc_cell32l): Remove declaration. (tdesc_powerpc_cell64l): Likewise. * nat/ppc-linux.h (PPC_FEATURE_CELL): Remove. * ppc-linux-nat.c (ppc_linux_nat_target::read_description): Remove Cell/B.E. support. * ppc-linux-tdep.h: Do not include "solib-spu.h" or "spu-tdep.h". Do not include "features/rs6000/powerpc-cell32l.c" or "features/rs6000/powerpc-cell64l.c". (ppc_linux_spu_section): Remove. (ppc_linux_core_read_description): Remove Cell/B.E. support. (spe_context_objfile, spe_context_lm_addr, spe_context_offset, spe_context_cache_ptid, spe_context_cache_ptid): Remove. (ppc_linux_spe_context_lookup): Remove. (ppc_linux_spe_context_inferior_created): Remove. (ppc_linux_spe_context_solib_loaded): Remove. (ppc_linux_spe_context_solib_unloaded): Remove. (ppc_linux_spe_context): Remove. (struct ppu2spu_cache): Remove. (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register): Remove. (struct ppu2spu_data): Remove. (ppu2spu_unwind_register, ppu2spu_sniffer, ppu2spu_dealloc_cache, ppu2spu_unwind): Remove. (ppc_linux_init_abi): Remove Cell/B.E. support. * rs6000-tdep.h (rs6000_gdbarch_init): Remove Cell/B.E. support. * features/Makefile (rs6000/powerpc-cell32l-expedite): Remove. (rs6000/powerpc-cell64l-expedite): Likewise (WHICH): Remove rs6000/powerpc-cell32l and rs6000/powerpc-cell64l. (XMLTOC): Remove rs6000/powerpc-cell32l.xml and rs6000/powerpc-cell64l.xml. * features/rs6000/powerpc-cell32l.xml: Remove. * features/rs6000/powerpc-cell64l.xml: Likewise. * features/rs6000/powerpc-cell32l.c: Remove generated file. * features/rs6000/powerpc-cell64l.c: Likewise. * regformats/rs6000/powerpc-cell32l.dat: Remove generated file. * regformats/rs6000/powerpc-cell64l.dat: Likewise. * regformats/reg-spu.dat: Remove. * target.h (enum target_object): Remove TARGET_OBJECT_SPU. * corelow.c (struct spuid_list): Remove. (add_to_spuid_list): Remove. (core_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * remote.c (PACKET_qXfer_spu_read, PACKET_qXfer_spu_write): Remove. (remote_protocol_features): Remove associated entries. (_initialize_remote): No longer initialize them. (remote_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * linux-nat.c (SPUFS_MAGIC): Remove. (linux_proc_xfer_spu): Remove. (spu_enumerate_spu_ids): Remove. (linux_nat_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * linux-tdep.c (-linux_spu_make_corefile_notes): Remove. (linux_make_corefile_notes): No longer call it. * regcache.c (cooked_read_test): Remove bfd_arch_spu special case. (cooked_write_test): Likewise. gdb/doc/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * doc/gdb.texinfo (Remote Configuration): Remove documentation for qXfer:spu:read and qXfer:spu:write. (General Query Packets): Likewise. (Cell Broadband Engine SPU architecture): Remove subsection. gdb/gdbserver/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * configure.srv (ipa_ppc_linux_regobj): Remove powerpc-cell32l-ipa.o and powerpc-cell64l-ipa.o. (powerpc*-*-linux*): Remove powerpc-cell32l.o and powerpc-cell64l.o from srv_regobj. Remove rs6000/powerpc-cell32l.xml and rs6000/powerpc-cell64l.xml from srv_xmlfiles. (spu*-*-*): Remove. * spu-low.c: Remove file. * linux-ppc-low.c (INSTR_SC, NR_spu_run): Remove. (parse_spufs_run): Remove. (ppc_get_pc): Remove Cell/B.E. support. (ppc_set_pc): Likewise. (ppc_breakpoint_at): Likewise. (ppc_arch_setup): Likewise. (ppc_get_ipa_tdesc_idx): Do not handle tdesc_powerpc_cell64l or tdesc_powerpc_cell32l. (initialize_low_arch): Do not call init_registers_powerpc_cell64l or init_registers_powerpc_cell32l. * linux-ppc-ipa.c (get_ipa_tdesc): Do not handle PPC_TDESC_CELL. (initialize_low_tracepoint): Do not call init_registers_powerpc_cell64l or init_registers_powerpc_cell32l. * linux-ppc-tdesc-init.h (PPC_TDESC_CELL): Mark as unused. (init_registers_powerpc_cell32l): Remove prototype. (init_registers_powerpc_cell64l): Likewise. * target.h (struct target_ops): Remove qxfer_spu member. * server.c (handle_qxfer_spu): Remove. (qxfer_packets): Remove entry for "spu". (handle_query): No longer support qXfer:spu:read or qXfer:spu:write. * linux-low.c (SPUFS_MAGIC): Remove. (spu_enumerate_spu_ids): Remove. (linux_qxfer_spu): Remove. (linux_target_ops): Remove qxfer_spu member. * lynx-low.c (lynx_target_ops): Remove qxfer_spu member. * nto-low.c (nto_target_ops): Remove qxfer_spu member. * win32-low.c (win32_target_ops): Remove qxfer_spu member. gdb/testsuite/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * gdb.arch/spu-info.exp: Remove file. * gdb.arch/spu-info.c: Remove file. * gdb.arch/spu-ls.exp: Remove file. * gdb.arch/spu-ls.c: Remove file. * gdb.asm/asm-source.exp: Remove support for spu*-*-*. * gdb.asm/spu.inc: Remove file. * gdb.base/dump.exp: Remove support for spu*-*-*. * gdb.base/stack-checking.exp: Likewise. * gdb.base/overlays.exp: Likewise. * gdb.base/ovlymgr.c: Likewise. * gdb.base/spu.ld: Remove file. * gdb.cp/bs15503.exp: Remove support for spu*-*-*. * gdb.cp/cpexprs.exp: Likewise. * gdb.cp/exception.exp: Likewise. * gdb.cp/gdb2495.exp: Likewise. * gdb.cp/mb-templates.exp: Likewise. * gdb.cp/pr9167.exp: Likewise. * gdb.cp/userdef.exp: Likewise. * gdb.xml/tdesc-regs.exp: Remove support for spu*-*-*. * gdb.cell: Remove directory. * lib/cell.exp: Remove file.
2019-08-23Move gdb-dlfcn.[ch] to gdbsupport/Sergio Durigan Junior1-2/+2
I need to use 'gdb_dlopen' inside 'gdbsupport/', but it's not yet supported there. This commit moves 'gdb-dlfcn.[ch]' to 'gdbsupport/', which makes it available also on gdbserver. gdb/ChangeLog: 2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com> * configure.ac: Don't check for 'dlfcn.h' (moved to gdbsupport/common.m4). * Makefile.in (COMMON_SFILES): Move 'gdb-dlfcn.c' to 'gdbsupport/'. (HFILES_NO_SRCDIR): Likewise, for 'gdb-dlfcn.h'. * compile/compile-c-support.c: Include 'gdbsupport/gdb-dlfcn.h'. * gdbsupport/common.m4: Check for 'dlfcn.h'. * gdb-dlfcn.c: Move to... * gdbsupport/gdb-dlfcn.c: ... here. * gdb-dlfcn.h: Move to... * gdbsupport/gdb-dlfcn.h: ... here. gdb/gdbserver/ChangeLog: 2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (SFILES): Add 'gdbsupport/gdb-dlfcn.c'. (OBS): Add 'gdbsupport/gdb-dlfcn.o'. * config.in: Regenerate. * configure: Regenerate.
2019-08-07Add a selftest that checks documentation invariants.Philippe Waroquiers1-0/+1
Several approaches were discussed (mail or irc) to verify the invariants of the GDB help documentation : checking with apropos ., modifying add_cmd to do the check and output a warning, implement maintenance check-doc. A selftest was finally chosen as: * this can be run on demand, including by users if they want to check user defined commands. * it does not interact with the normal behaviour of apropos, define, python, ... (such as output warnings when a user defines a command help that does not respect the doc). * when the selftest runs, it checks the user defined and python defined commands currently defined. gdb/ChangeLog * unittests/help-doc-selftests.c: New file. * Makefile.in: Add the new file.
2019-08-06[PR build/24886] disable glibc mcheck supportFrank Ch. Eigler1-1/+0
This patch drops gdb's configury support for glibc's mcheck function. It has been observed to cause false abort()s, because it is thread-unsafe yet interposes every malloc/free operation. So if any library transitively used by gdb also uses threads, then these functions can easily corrupt their own checking data. These days, gcc ASAN and valgrind provide high quality checking, and mcheck is apparently itself being slowly deprecated. So, let's stop linking to it. Attached patch drops the autoconf/Makefile machinery for both gdb and gdbserver. No testsuite-visible impact. IMHO not worth mentioning in NEWS. See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939 gdb/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * libmcheck.m4: Remove. * acinclude.m4: Don't include it. * Makefile.in: Don't distribute it. * top.c (print_gdb_configuration): Don't mention it. gdb/gdbserver/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * acinclude.m4: Don't include it.
2019-07-19Arm: Add read_description read funcs and use in GDBAlan Hayward1-0/+5
Switch the Arm target to get target descriptions via arm_read_description and aarch32_read_description, in the same style as other feature targets. Add an enum to specify the different types - this will also be of use to gdbserver in a later patch. Under the hood return the same existing pre-feature target descriptions. gdb/ChangeLog: * Makefile.in: Add new files. * aarch32-tdep.c: New file. * aarch32-tdep.h: New file. * aarch64-linux-nat.c (aarch64_linux_nat_target::read_description): Call aarch32_read_description. * arch/aarch32.c: New file. * arch/aarch32.h: New file. * arch/arm.c (arm_create_target_description) (arm_create_mprofile_target_description): New function. * arch/arm.h (arm_fp_type, arm_m_profile_type): New enum. (arm_create_target_description) (arm_create_mprofile_target_description): New declaration. * arm-fbsd-tdep.c (arm_fbsd_read_description_auxv): Call read_description functions. * arm-linux-nat.c (arm_linux_nat_target::read_description): Likewise. * arm-linux-tdep.c (arm_linux_core_read_description): Likewise. * arm-tdep.c (tdesc_arm_list): New variable. (arm_register_g_packet_guesses): Call create description functions. (arm_read_description) (arm_read_mprofile_description): New function. * arm-tdep.h (arm_read_description) (arm_read_mprofile_description): Add declaration. * configure.tgt: Add new files.
2019-07-17Rearrange TUI data window codeTom Tromey1-1/+0
An earlier patch caused tui-windata.h to be essentially empty. And, other earlier patches implemented TUI data window methods in any spot that happened to be convenient at the time. This patch rearranges all the data window code to be somewhat more organized. It moves tui_data_window to tui-regs.h, and moves the implementation of all methods to tui-regs.c. It then removes tui-windata.h and tui-windata.c. It also removes the "structuring" comments from tui-regs.c; these are not the usual gdb style, and were out of date anyhow. Finally, it moves _initialize_tui_regs to the end of the file, per the usual gdb convention. gdb/ChangeLog 2019-07-17 Tom Tromey <tom@tromey.com> * tui/tui.c: Update. * tui/tui-wingeneral.c (tui_data_window::refresh_window): Move to tui-regs.c. * tui/tui-windata.h: Remove file. * tui/tui-windata.c: Remove file. * tui/tui-win.c (tui_data_window::set_new_height) (tui_data_window::do_make_visible_with_new_height): Move to tui-regs.c. * tui/tui-regs.h (struct tui_data_window): Move from tui-data.h. * tui/tui-regs.c: Remove "structuring" comments. (tui_data_window::first_data_item_displayed) (tui_data_window::delete_data_content_windows) (tui_data_window::erase_data_content) (tui_data_window::display_all_data) (tui_data_window::refresh_all) (tui_data_window::do_scroll_vertical) (tui_data_window::clear_detail, tui_data_window::set_new_height) (tui_data_window::do_make_visible_with_new_height) (tui_data_window::refresh_window): Move from elsewhere. (_initialize_tui_regs): Move to end of file. * tui/tui-layout.c: Update. * tui/tui-hooks.c: Update. * tui/tui-data.h (struct tui_data_window): Move to tui-regs.h. * tui/tui-data.c (tui_data_window::clear_detail): Move to tui-regs.c. * Makefile.in (SUBDIR_TUI_SRCS): Remove tui-windata.c.
2019-07-09Rename common to gdbsupportTom Tromey1-73/+73
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-06-14Move gnulib to top levelTom Tromey1-31/+4
This patch moves the gdb/gnulib subdirectory to the top level. It adjusts the top-level build system to build gnulib when necessary, and changes gdb to use this. However, gdbserver still builds its own copy of gnulib, just from the new source location. A small hack was needed to ensure that gnulib is only built when gdb is enabled. The Makefile only provides an ordering -- the directory must be mentioned in configdirs to actually be compiled at all. Most of the patch is just a "git mv" of gnulib, though a few minor path adjustments were needed in some files there. Tested by the buildbot. ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * MAINTAINERS: Add gnulib. * gnulib: New directory, move from gdb/gnulib. * configure.ac (host_libs): Add gnulib. * configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * gnulib: Move directory to top-level. * configure.ac: Don't configure gnulib. * configure: Rebuild. * common/common-defs.h: Use new path to gnulib. * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib. (GNULIB_H): Remove. (INCGNU): Look in new gnulib location. (HFILES_NO_SRCDIR): Remove gnulib files. (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib. (generated_files): Remove GNULIB_H. ($(LIBGNU), all-lib): Remove targets. (distclean): Don't mention GNULIB_BUILDDIR. ($(GNULIB_BUILDDIR)/Makefile): Remove target. gdb/gdbserver/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * configure.ac: Use new path to gnulib. * configure: Rebuild. * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path to gnulib. gnulib/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * update-gnulib.sh: Adjust paths. * Makefile.in: Adjust paths. * configure.ac: Adjust paths. Use ACX_LARGEFILE. * configure: Rebuild.
2019-06-13Introduce generic command options frameworkPedro Alves1-0/+2
This commit adds a generic command options framework, that makes it easy enough to add '-'-style options to commands in a uniform way, instead of each command implementing option parsing in its own way. Options are defined in arrays of option_def objects (for option definition), and the same options definitions are used for supporting TAB completion, and also for generating the relevant help fragment of the "help" command. See the gdb::options::build_help function, which returns a string with the result of replacing %OPTIONS% in a template string with an auto-generated "help" string fragment for all the passed-in options. Since most options in GDB are in the form of "-OPT", with a single dash, this is the format that the framework supports. I like to think of gdb's "-OPT" as the equivalent to getopt's long options format ("--OPT"), and gdb's "/" as the equivalent to getopt's short options format. getopt's short options format allows mixing several one-character options, like "ls -als", kind of similar to gdb's "x /FMT" and "disassemble /MOD", etc. While with gdb's "-" options, the option is expected to have a full name, and to be abbreviatable. E.g., "watch -location", "break -function main", etc. This patch only deals with "-" options. The above comment serves more to disclose why I don't think we should support mixing several unrelated options in a single "-" option invocation, like "thread apply -qcs" instead of "thread apply -q -c -s". The following patches will add uses of the infrastructure to several key commands. Most notably, "print", "compile print", "backtrace", "frame apply" and "thread apply". I tried to add options to several commands in order to make sure the framework didn't leave that many open holes open. Options use the same type as set commands -- enum var_types. So boolean options are var_boolean, enum options are var_enum, etc. The idea is to share code between settings commands and command options. The "print" options will be based on the "set print" commands, and their names will be the same. Actually, their definitions will be the same too. There is a function to create "set/show" commands from an array for option definitions: /* Install set/show commands for options defined in OPTIONS. DATA is a pointer to the structure that holds the data associated with the OPTIONS array. */ extern void add_setshow_cmds_for_options (command_class cmd_class, void *data, gdb::array_view<const option_def> options, struct cmd_list_element **set_list, struct cmd_list_element **show_list); That will be used by several following patches. Other features: - You can use the "--" delimiter to explicitly indicate end of options. Several existing commands use this token sequence for this effect already, so this just standardizes it. - You can shorten option names, as long as unambiguous. Currently, some commands allow this (e.g., break -function), while others do not (thread apply all -ascending). As GDB allows abbreviating command names and other things, it feels more GDB-ish to allow abbreviating option names too, to me. - For boolean options, 0/1 stands for off/on, just like with boolean "set" commands. - For boolean options, "true" is implied, just like with boolean "set commands. These are the option types supported, with a few examples: - boolean options (var_boolean). The option's argument is optional. (gdb) print -pretty on -- *obj (gdb) print -pretty off -- *obj (gdb) print -p -- *obj (gdb) print -p 0 -- *obj - flag options (like var_boolean, but no option argument (on/off)) (gdb) thread apply all -s COMMAND - enum options (var_enum) (gdb) bt -entry-values compact (gdb) bt -e c - uinteger options (var_uinteger) (gdb) print -elements 100 -- *obj (gdb) print -e 100 -- *obj (gdb) print -elements unlimited -- *obj (gdb) print -e u -- *obj - zuinteger-unlimited options (var_zuinteger_unlimited) (gdb) print -max-depth 100 -- obj (gdb) print -max-depth -1 -- obj (gdb) print -max-depth unlimited -- obj Other var_types could be supported, of course. These were just the types that I needed for the commands that I ported over, in the following patches. It was interesting (and unfortunate) to find that we need at least 3 different modes to cover the existing commands: - Commands that require ending options with "--" if you specify any option: "print" and "compile print". - Commands that do not want to require "--", and want to error out if you specify an unknown option (i.e., an unknown argument that starts with '-'): "compile code" / "compile file". - Commands that do not want to require "--", and want to process unknown options themselves: "bt", because of "bt -COUNT", "thread/frame apply", because "-" is a valid command. The different behavior is encoded in the process_options_mode enum, passed to process_options/complete_options. For testing, this patch adds one representative maintenance command for each of the process_options_mode values, that are used by the testsuite to exercise the options framework: (gdb) maint test-options require-delimiter (gdb) maint test-options unknown-is-error (gdb) maint test-options unknown-is-operand and adds another command to help with TAB-completion testing: (gdb) maint show test-options-completion-result See their description at the top of the maint-test-options.c file. Docs/NEWS are in a patch later in the series. gdb/ChangeLog: 2019-06-13 Pedro Alves <palves@redhat.com> * Makefile.in (SUBDIR_CLI_SRCS): Add cli/cli-option.c. (COMMON_SFILES): Add maint-test-settings.c. * cli/cli-decode.c (boolean_enums): New global, factored out from ... (add_setshow_boolean_cmd): ... here. * cli/cli-decode.h (boolean_enums): Declare. * cli/cli-option.c: New file. * cli/cli-option.h: New file. * cli/cli-setshow.c (parse_cli_boolean_value(const char **)): New, factored out from ... (parse_cli_boolean_value(const char *)): ... this. (is_unlimited_literal): Change parameter type to pointer to pointer. Adjust and advance ARG pointer. (parse_cli_var_uinteger, parse_cli_var_zuinteger_unlimited) (parse_cli_var_enum): New, factored out from ... (do_set_command): ... this. Adjust. * cli/cli-setshow.h (parse_cli_boolean_value) (parse_cli_var_uinteger, parse_cli_var_zuinteger_unlimited) (parse_cli_var_enum): Declare. * cli/cli-utils.c: Include "cli/cli-option.h". (get_ulongest): New. * cli/cli-utils.h (get_ulongest): Declare. (check_for_argument): New overloads. * maint-test-options.c: New file. gdb/testsuite/ChangeLog: 2019-06-13 Pedro Alves <palves@redhat.com> * gdb.base/options.c: New file. * gdb.base/options.exp: New file.
2019-06-13New set/show testing framework (gdb.base/settings.exp)Pedro Alves1-0/+1
This commit adds new representative commands for all types of settings commands supported by gdb (enum var_types), and then uses them to exercise settings parsing and completion. (gdb) maint test-settings s[TAB] set show (gdb) maint test-settings set [TAB] auto-boolean integer uinteger boolean optional-filename zinteger enum string zuinteger filename string-noescape zuinteger-unlimited (gdb) maint test-settings set enum [TAB] xxx yyy zzz etc. This is basically unit testing, except that it goes fully via GDB. It must be done this way in order to exercise TAB completion properly, which must go via readline. gdb/ChangeLog: 2019-06-13 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add maint-test-settings.c. * NEWS: Mention maint test-settings KIND. * maint-test-settings.c: New file. gdb/doc/ChangeLog: 2019-06-13 Pedro Alves <palves@redhat.com> * gdb.texinfo (Maintenance Commands): Document "maint test-settings" commands. gdb/testsuite/ChangeLog: 2019-06-13 Pedro Alves <palves@redhat.com> * gdb.base/settings.c: New file. * gdb.base/settings.exp: New file.
2019-06-11Move gdb's xmalloc and friends to new fileTom Tromey1-0/+1
When "common" becomes a library, linking will cause a symbol clash, because "xmalloc" and some related symbols are defined in that library, libiberty, and readline. To work around this problem, this patch moves the clashing symbols to a new file, which is then compiled separately for both gdb and gdbserver. gdb/ChangeLog 2019-06-11 Tom Tromey <tom@tromey.com> * common/common-utils.c (xmalloc, xrealloc, xcalloc) (xmalloc_failed): Move to alloc.c. * alloc.c: New file. * Makefile.in (COMMON_SFILES): Add alloc.c. gdb/gdbserver/ChangeLog 2019-06-11 Tom Tromey <tom@tromey.com> * Makefile.in (SFILES): Add alloc.c. (OBS): Add alloc.o. (IPA_OBJS): Add alloc-ipa.o. (alloc-ipa.o): New target. (%.o: ../%.c): New pattern rule.
2019-04-04Move type stack handling to a new classTom Tromey1-0/+2
This introduces a new "type_stack" class, and moves all the parser type stack handling to this class. Parsers that wish to use this facility must now instantiate this class somehow. I chose this approach because a minority of the existing parsers require this. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * type-stack.h: New file. * type-stack.c: New file. * parser-defs.h (enum type_pieces, union type_stack_elt): Move to type-stack.h. (insert_into_type_stack, insert_type, push_type, push_type_int) (insert_type_address_space, pop_type, pop_type_int) (pop_typelist, pop_type_stack, append_type_stack) (push_type_stack, get_type_stack, push_typelist) (follow_type_instance_flags, follow_types): Don't declare. * parse.c (type_stack): Remove global. (parse_exp_in_context): Update. (insert_into_type_stack, insert_type, push_type, push_type_int) (insert_type_address_space, pop_type, pop_type_int) (pop_typelist, pop_type_stack, append_type_stack) (push_type_stack, get_type_stack, push_typelist) (follow_type_instance_flags, follow_types): Remove (moved to type-stack.c). * f-exp.y (type_stack): New global. Update rules. (push_kind_type, f_parse): Update. * d-exp.y (type_stack): New global. Update rules. (d_parse): Update. * c-exp.y (struct c_parse_state) <type_stack>: New member. Update rules. * Makefile.in (COMMON_SFILES): Add type-stack.c. (HFILES_NO_SRCDIR): Add type-stack.h.
2019-02-12Add a new function child_path.John Baldwin1-0/+1
child_path returns a pointer to the first component in a child path that comes after a parent path. This does not depend on trying to stat() the paths since they may describe remote paths but instead relies on filename parsing. The function requires that the child path describe a filename that contains at least one component below the parent path and returns a pointer to the first component. gdb/ChangeLog: * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add unittests/child-path-selftests.c. * common/pathstuff.c (child_path): New function. * common/pathstuff.h (child_path): New prototype. * unittests/child-path-selftests.c: New file.
2019-02-07C++-ify struct thread_fsmTom Tromey1-1/+0
This C++-ifies struct thread_fsm, replacing the "ops" structure with virtual methods, and changing all the implementations to derive from thread_fsm. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * thread.c (thread_cancel_execution_command): Update. * thread-fsm.h (struct thread_fsm): Add constructor, destructor, methods. (struct thread_fsm_ops): Remove. (thread_fsm_ctor, thread_fsm_delete, thread_fsm_clean_up) (thread_fsm_should_stop, thread_fsm_return_value) (thread_fsm_set_finished, thread_fsm_finished_p) (thread_fsm_async_reply_reason, thread_fsm_should_notify_stop): Don't declare. * mi/mi-interp.c (mi_on_normal_stop_1): Update. * infrun.c (clear_proceed_status_thread) (clean_up_just_stopped_threads_fsms, fetch_inferior_event) (print_stop_event): Update. * infcmd.c (struct step_command_fsm): Inherit from thread_fsm. Add constructor. (step_command_fsm_ops): Remove. (new_step_command_fsm): Remove. (step_1): Update. (step_command_fsm::should_stop): Rename from step_command_fsm_should_stop. (step_command_fsm::clean_up): Rename from step_command_fsm_clean_up. (step_command_fsm::do_async_reply_reason): Rename from step_command_fsm_async_reply_reason. (struct until_next_fsm): Inherit from thread_fsm. Add constructor. (until_next_fsm_ops): Remove. (new_until_next_fsm): Remove. (until_next_fsm::should_stop): Rename from until_next_fsm_should_stop. (until_next_fsm::clean_up): Rename from until_next_fsm_clean_up. (until_next_fsm::do_async_reply_reason): Rename from until_next_fsm_async_reply_reason. (struct finish_command_fsm): Inherit from thread_fsm. Add constructor. Change type of breakpoint. (finish_command_fsm_ops): Remove. (new_finish_command_fsm): Remove. (finish_command_fsm::should_stop): Rename from finish_command_fsm_should_stop. (finish_command_fsm::clean_up): Rename from finish_command_fsm_clean_up. (finish_command_fsm::return_value): Rename from finish_command_fsm_return_value. (finish_command_fsm::do_async_reply_reason): Rename from finish_command_fsm_async_reply_reason. (finish_command): Update. * infcall.c (struct call_thread_fsm): Inherit from thread_fsm. Add constructor. (call_thread_fsm_ops): Remove. (call_thread_fsm::call_thread_fsm): Rename from new_call_thread_fsm. (call_thread_fsm::should_stop): Rename from call_thread_fsm_should_stop. (call_thread_fsm::should_notify_stop): Rename from call_thread_fsm_should_notify_stop. (run_inferior_call, call_function_by_hand_dummy): Update. * cli/cli-interp.c (should_print_stop_to_console): Update. * breakpoint.c (struct until_break_fsm): Inherit from thread_fsm. Add constructor. Change type of location_breakpoint, caller_breakpoint. (until_break_fsm_ops): Remove. (new_until_break_fsm): Remove. (until_break_fsm::should_stop): Rename from until_break_fsm_should_stop. (until_break_fsm::clean_up): Rename from until_break_fsm_clean_up. (until_break_fsm::do_async_reply_reason): Rename from until_break_fsm_async_reply_reason. (until_break_command): Update. * thread-fsm.c: Remove. * Makefile.in (COMMON_SFILES): Remove thread-fsm.c.
2019-01-25Don't use -I for common subdirectoryTom Tromey1-1/+1
This changes the Makefiles to remove the -I for the common/ subdirectory. This will enforce the rule that includes must use the 'common/filename.h' form. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * Makefile.in (GDB_CFLAGS): Don't add -I for common. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * Makefile.in (INCLUDE_CFLAGS): Don't add -I for common.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-12-28Highlight source code using GNU Source HighlightTom Tromey1-2/+10
This changes gdb to highlight source using GNU Source Highlight, if it is available. This affects the output of the "list" command and also the TUI source window. No new test because I didn't see a way to make it work when Source Highlight is not found. gdb/ChangeLog 2018-12-28 Tom Tromey <tom@tromey.com> * utils.h (can_emit_style_escape): Declare. * utils.c (can_emit_style_escape): No longer static. * cli/cli-style.c (set_style_enabled): New function. (_initialize_cli_style): Use it. * tui/tui-winsource.c (tui_show_source_line): Use tui_puts. (tui_alloc_source_buffer): Change how source lines are allocated. * tui/tui-source.c (copy_source_line): New function. (tui_set_source_content): Use source cache. * tui/tui-io.h (tui_puts): Update. * tui/tui-io.c (tui_puts_internal): Add window parameter. (tui_puts): Likewise. (tui_redisplay_readline): Update. * tui/tui-data.c (free_content_elements): Change how source window contents are freed. * source.c (forget_cached_source_info): Clear the source cache. (print_source_lines_base): Use the source cache. * source-cache.h: New file. * source-cache.c: New file. * configure.ac: Check for GNU Source Highlight library. * configure: Update. * config.in: Update. * Makefile.in (SRCHIGH_LIBS, SRCHIGH_CFLAGS): New variables. (INTERNAL_CFLAGS_BASE): Add SRCHIGH_CFLAGS. (CLIBS): Add SRCHIGH_LIBS. (COMMON_SFILES): Add source-cache.c. (HFILES_NO_SRCDIR): Add source-cache.h.
2018-12-28Add output styles to gdbTom Tromey1-0/+2
This adds some output styling to the CLI. A style is currently a foreground color, a background color, and an intensity (dim or bold). (This list could be expanded depending on terminal capabilities.) A style can be applied while printing. For ui-out, this is done by passing the style constant as an argument. For low-level cases, fprintf_styled and fputs_styled are provided. Users can control the style via a number of new set/show commands. In the interest of not typing many nearly-identical documentation strings, I automated this. On the down side, this is not very i18n-friendly. I've chose some default colors to use. I think it would be good to enable this by default, so that when users start the new gdb, they will see the new feature. Stylizing is done if TERM is set and is not "dumb". This could be improved when the TUI is available by using the curses has_colors call. That is, the lowest layer could call this without committing to using curses everywhere; see my other patch for TUI colorizing. I considered adding a new "set_style" method to ui_file. However, because the implementation had to interact with the pager code, I didn't take this approach. But, one idea might be to put the isatty check there and then have it defer to the lower layers. gdb/ChangeLog 2018-12-28 Tom Tromey <tom@tromey.com> * utils.h (set_output_style, fprintf_styled) (fputs_styled): Declare. * utils.c (applied_style, desired_style): New globals. (emit_style_escape, set_output_style): New function. (prompt_for_continue): Emit style escapes. (fputs_maybe_filtered): Likewise. (fputs_styled, fprintf_styled): New functions. * ui-out.h (enum class ui_out_style_kind): New. (class ui_out) <field_string, field_stream, do_field_string>: Add style parameter. * ui-out.c (ui_out::field_stream, ui_out::field_string): Add style parameter. * tui/tui-out.h (class tui_ui_out) <do_field_string>: Add style parameter. * tui/tui-out.c (tui_ui_out::do_field_string): Add style parameter. (tui_ui_out::do_field_string): Update. * tracepoint.c (print_one_static_tracepoint_marker): Style output. * stack.c (print_frame_info, print_frame): Style output. * source.c (print_source_lines_base): Style output. * skip.c (info_skip_command): Style output. * record-btrace.c (btrace_call_history_src_line): Style output. (btrace_call_history): Likewise. * python/py-framefilter.c (py_print_frame): Style output. * mi/mi-out.h (class mi_ui_out) <do_field_string>: Add style parameter. * mi/mi-out.c (mi_ui_out::do_table_header) (mi_ui_out::do_field_int): Update. (mi_ui_out::do_field_string): Update. * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Style output. * cli/cli-style.h: New file. * cli/cli-style.c: New file. * cli-out.h (class cli_ui_out) <do_field_string>: Add style parameter. * cli-out.c (cli_ui_out::do_table_header) (cli_ui_out::do_field_int, cli_ui_out::do_field_skip): Update. (cli_ui_out::do_field_string): Add style parameter. Style the output. * breakpoint.c (print_breakpoint_location): Style output. (update_static_tracepoint): Likewise. * Makefile.in (SUBDIR_CLI_SRCS): Add cli-style.c. (HFILES_NO_SRCDIR): Add cli-style.h. gdb/testsuite/ChangeLog 2018-12-28 Tom Tromey <tom@tromey.com> * gdb.base/style.exp: New file. * gdb.base/style.c: New file.
2018-12-28Introduce ui_file_styleTom Tromey1-0/+3
This introduces the new ui_file_style class and various helpers. This class represents a terminal style and provides methods for parsing and emitting the corresponding ANSI terminal escape sequences. gdb/ChangeLog 2018-12-28 Tom Tromey <tom@tromey.com> * unittests/style-selftests.c: New file. * ui-style.c: New file. * ui-style.h: New file. * ui-file.h: Include ui-style.h. * Makefile.in (COMMON_SFILES): Add ui-style.c. (HFILES_NO_SRCDIR): Add ui-style.h. (SUBDIR_UNITTESTS_SRCS): Add style-selftests.c.
2018-12-27Build gdb "nat" files in subdirectoryTom Tromey1-6/+3
This moves the various "nat" object files into the nat/ subdirectory. This allows for the removal of a pattern rule from the gdb Makefile, which is a small cleanup. I made the configure.nat change in a (semi-) automated way, hopefully meaning that it is more likely to be correct than had I done it by hand. Eventually I would like for the various configure scripts to only mention source files, and let the Makefile compute the object file names. gdb/ChangeLog 2018-12-27 Tom Tromey <tom@tromey.com> * configure.nat (NATDEPFILES): Use nat/ prefix. * Makefile.in (CONFIG_SRC_SUBDIR): Add nat. (%.o: ${srcdir}/nat/%.c): Remove rule. (INIT_FILES): Do not filter out NATDEPFILES.
2018-12-27Make init.c depend on source filesTom Tromey1-24/+11
I noticed that init.c depends on the object files that go into gdb. Because init.c actually only requires the contents of the corresponding source files, this unnecessarily serializes the step that builds init.c. This patch changes gdb's Makefile to make init.c depend on the source files. This also simplifies the rule to build init.c. gdb/ChangeLog 2018-12-27 Tom Tromey <tom@tromey.com> * Makefile.in (INIT_FILES): Redefine. (stamp-init): Remove sed, tr invocations. Use for loop. Don't set LANG or LC_ALL.
2018-12-27Remove gdbtypes special case from init.c ruleTom Tromey1-15/+1
The rule to make init.c has a special case for gdbtypes, with a long explanatory comment. All of this is obsolete, as the globals referred to by the comment no longer exist. This patch simplifies the rule. gdb/ChangeLog 2018-12-27 Tom Tromey <tom@tromey.com> * Makefile.in (stamp-init): Remove gdbtypes special case.
2018-12-27Remove empty nm-fbsd.h header for FreeBSD/i386 native target.John Baldwin1-1/+0
gdb/ChangeLog: * config/i386/nm-fbsd.h: Remove file. * Makefile.in (HFILES_NO_SRCDIR): Remove config/i386/nm-fbsd.h. * configure.nat: Remove NAT_FILE for FreeBSD/i386.
2018-12-14Minor gdb/Makefile.in cleanupsTom Tromey1-7/+1
This removes an IMO not very useful comment in gdb/Makefile.in about "alloca". It also removes INFOFILES, which I think probably has not been useful since whenever the manual was moved into a subdirectory. gdb/ChangeLog 2018-12-14 Tom Tromey <tom@tromey.com> * Makefile.in: Remove "alloca" comment. (INFOFILES): Remove. (local-maintainer-clean): Don't use INFOFILES.
2018-12-08gdb/or1k: Add linux debugging supportStafford Horne1-0/+1
Up until now OpenRISC GDB only has supported bare metal debugging. This patch adds linux userspace debugging and core dump analysis support. The changes are loosely based on nios2 and riscv implementations. This was tested with linux 4.20 core dumps for executables linked against musl libc. bfd/ChangeLog: * elf32-or1k.c (or1k_grok_prstatus): New function. (or1k_grok_psinfo): Likewise. gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add or1k-linux-tdep.o. * configure.tgt: Add or1k*-*-linux*. * or1k-linux-tdep.c: New file. * or1k-tdep.c (or1k_gdbarch_init): Call gdbarch_init_osabi.
2018-11-30Introduce process_stratum_targetPedro Alves1-0/+1
This adds a base class that all process_stratum targets inherit from. default_thread_address_space/default_thread_architecture only make sense for process_stratum targets, so they are transformed to process_stratum_target methods/overrides. gdb/ChangeLog: 2018-11-30 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add process-stratum-target.c. * bsd-kvm.c: Include "process-stratum-target.h". (bsd_kvm_target): Now inherits from process_stratum_target. (bsd_kvm_target::bsd_kvm_target): Default it. * corelow.c: Include "process-stratum-target.h". (core_target): Now inherits from process_stratum_target. (core_target::core_target): Don't set to_stratum here. * inf-child.c (inf_child_target::inf_child_target): Delete. * inf-child.h: Include "process-stratum-target.h". (inf_child_target): Inherit from process_stratum_target. (inf_child_target) <inf_child_target>: Default it. <can_async_p, supports_non_stop, supports_disable_randomization>: Delete overrides. * process-stratum-target.c: New file. * process-stratum-target.h: New file. * remote-sim.c: Include "process-stratum-target.h". (gdbsim_target): Inherit from process_stratum_target. <gdbsim_target>: Default it. * remote.c: Include "process-stratum-target.h". (remote_target): Inherit from process_stratum_target. <remote_target>: Default it. * target.c (default_thread_address_space) (default_thread_architecture): Delete. * target.h (target_ops) <thread_architecture>: Now returns NULL by default. <thread_address_space>: Ditto. * test-target.h: Include "process-stratum-target.h" instead of "target.h". (test_target_ops): Inherit from process_stratum_target. <test_target_ops>: Default it. * tracefile.c (tracefile_target::tracefile_target): Delete. * tracefile.h: Include "process-stratum-target.h". (tracefile_target): Inherit from process_stratum_target. <tracefile_target>: Default it. * target-delegates.c: Regenerate.
2018-11-30Move test_target_ops to a separate filePedro Alves1-0/+1
There's no need to have all target.h users seeing this type. Also helps with a follow up patch. gdb/ChangeLog: 2018-11-30 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add test-target.c. * gdbarch-selftests.c: Include "test-target.h". * regcache.c: Include "test-target.h". * target.c (test_target_info, test_target_ops::info): Move to ... * test-target.c: ... this new file. * target.h (test_target_ops): Move to ... * test-target.h: ... this new file.
2018-11-22Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.Pedro Alves1-0/+1
As preparation for multi-target, this patch makes each inferior have its own thread list. This isn't absolutely necessary for multi-target, but simplifies things. It originally stemmed from the desire to eliminate the init_thread_list calls sprinkled around, plus it makes it more efficient to iterate over threads of a given inferior (no need to always iterate over threads of all inferiors). We still need to iterate over threads of all inferiors in a number of places, which means we'd need adjust the ALL_THREADS / ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros to have an extra for loop, like: #define ALL_THREADS (thr, inf) \ for (inf = inferior_list; inf; inf = inf->next) \ for (thr = inf->thread_list; thr; thr = thr->next) causes problems with code that does "break" or "continue" within the ALL_THREADS loop body. Plus, we need to declare the extra "inf" local variable in order to pass it as temporary variable to ALL_THREADS (etc.) It gets even trickier when we consider extending the macros to filter out threads matching a ptid_t and a target. The macros become tricker to read/write. Been there. An alternative (which was my next attempt), is to replace the ALL_THREADS etc. iteration style with for_each_all_threads, for_each_non_exited_threads, etc. functions which would take a callback as parameter, which would usually be passed a lambda. However, I did not find that satisfactory at all, because the resulting code ends up a little less natural / more noisy to read, write and debug/step-through (due to use of lambdas), and in many places where we use "continue;" to skip to the next thread now need to use "return;". (I ran into hard to debug bugs caused by a continue/return confusion.) I.e., before: ALL_NON_EXITED_THREADS (tp) { if (tp->not_what_I_want) continue; // do something } would turn into: for_each_non_exited_thread ([&] (thread_info *tp) { if (tp->not_what_I_want) return; // do something }); Lastly, the solution I settled with was to replace the ALL_THREADS / ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges and iterators, such that you can instead naturaly iterate over threads/inferiors using range-for, like e.g,.: // all threads, including THREAD_EXITED threads. for (thread_info *tp : all_threads ()) { .... } // all non-exited threads. for (thread_info *tp : all_non_exited_threads ()) { .... } // all non-exited threads of INF inferior. for (thread_info *tp : inf->non_exited_threads ()) { .... } The all_non_exited_threads() function takes an optional filter ptid_t as parameter, which is quite convenient when we need to iterate over threads matching that filter. See e.g., how the set_executing/set_stop_requested/finish_thread_state etc. functions in thread.c end up being simplified. Most of the patch thus is about adding the infrustructure for allowing the above. Later on when we get to actual multi-target, these functions/ranges/iterators will gain a "target_ops *" parameter so that e.g., we can iterate over all threads of a given target that match a given filter ptid_t. The only entry points users needs to be aware of are the all_threads/all_non_exited_threads etc. functions seen above. Thus, those functions are declared in gdbthread.h/inferior.h. The actual iterators/ranges are mainly "internals" and thus are put out of view in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That keeps the gdbthread.h/inferior.h headers quite a bit more readable. A common/safe-iterator.h header is added which adds a template that can be used to build "safe" iterators, which are forward iterators that can be used to replace the ALL_THREADS_SAFE macro and other instances of the same idiom in future. There's a little bit of shuffling of code between gdbthread.h/thread.c/inferior.h in the patch. That is necessary in order to avoid circular dependencies between the gdbthread.h/inferior.h headers. As for the init_thread_list calls sprinkled around, they're all eliminated by this patch, and a new, central call is added to inferior_appeared. Note how also related to that, there's a call to init_wait_for_inferior in remote.c that is eliminated. init_wait_for_inferior is currently responsible for discarding skipped inline frames, which had to be moved elsewhere. Given that nowadays we always have a thread even for single-threaded processes, the natural place is to delete a frame's inline frame info when we delete the thread. I.e., from clear_thread_inferior_resources. gdb/ChangeLog: 2018-11-22 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add thread-iter.c. * breakpoint.c (breakpoints_should_be_inserted_now): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (print_one_breakpoint_location): Replace ALL_INFERIORS with all_inferiors. * bsd-kvm.c: Include inferior.h. * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * common/filtered-iterator.h: New. * common/safe-iterator.h: New. * corelow.c (core_target_open): Don't call init_thread_list here. * darwin-nat.c (thread_info_from_private_thread_info): Replace ALL_THREADS with all_threads. * fbsd-nat.c (fbsd_nat_target::resume): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fbsd-tdep.c (fbsd_make_corefile_notes): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fork-child.c (postfork_hook): Don't call init_thread_list here. * gdbarch-selftests.c (register_to_value_test): Adjust. * gdbthread.h: Don't include "inferior.h" here. (struct inferior): Forward declare. (enum step_over_calls_kind): Moved here from inferior.h. (thread_info::deletable): Definition moved to thread.c. (find_thread_ptid (inferior *, ptid_t)): Declare. (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete. Include "thread-iter.h". (all_threads, all_non_exited_threads, all_threads_safe): New. (any_thread_p): Declare. (thread_list): Delete. * infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (proceed_after_attach_callback): Delete. (proceed_after_attach): Take an inferior pointer instead of an integer PID. Adjust to use range-for. (attach_post_wait): Pass down inferior pointer instead of pid. Use range-for instead of ALL_NON_EXITED_THREADS. (detach_command): Remove init_thread_list call. * inferior-iter.h: New. * inferior.c (struct delete_thread_of_inferior_arg): Delete. (delete_thread_of_inferior): Delete. (delete_inferior, exit_inferior_1): Use range-for with inf->threads_safe() instead of iterate_over_threads. (inferior_appeared): Call init_thread_list here. (discard_all_inferiors): Use all_non_exited_inferiors. (find_inferior_id, find_inferior_pid): Use all_inferiors. (iterate_over_inferiors): Use all_inferiors_safe. (have_inferiors, number_of_live_inferiors): Use all_non_exited_inferiors. (number_of_inferiors): Use all_inferiors and std::distance. (print_inferior): Use all_inferiors. * inferior.h: Include gdbthread.h. (enum step_over_calls_kind): Moved to gdbthread.h. (struct inferior) <thread_list>: New field. <threads, non_exited_threads, threads_safe>: New methods. (ALL_INFERIORS): Delete. Include "inferior-iter.h". (ALL_NON_EXITED_INFERIORS): Delete. (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New functions. * inflow.c (child_interrupt, child_pass_ctrlc): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * infrun.c (follow_exec): Use all_threads_safe. (clear_proceed_status, proceed): Use all_non_exited_threads. (init_wait_for_inferior): Don't clear inline frame state here. (infrun_thread_stop_requested, for_each_just_stopped_thread): Use all_threads instead of ALL_NON_EXITED_THREADS. (random_pending_event_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use a lambda for repeated code. (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (handle_no_resumed): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use all_inferiors instead of ALL_INFERIORS. (restart_threads, switch_back_to_stepped_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with all_inferiors. (kill_unfollowed_fork_children): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-tdep.c (linux_make_corefile_notes): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-thread-db.c (thread_db_target::update_thread_list): Replace ALL_INFERIORS with all_inferiors. (thread_db_target::thread_handle_to_thread_info): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * mi/mi-interp.c (multiple_inferiors_p): New. (mi_on_resume_1): Simplify using all_non_exited_threads and multiple_inferiors_p. * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * nto-procfs.c (nto_procfs_target::open): Don't call init_thread_list here. * record-btrace.c (record_btrace_target_open) (record_btrace_target::stop_recording) (record_btrace_target::close) (record_btrace_target::record_is_replaying) (record_btrace_target::resume, record_btrace_target::wait) (record_btrace_target::record_stop_replaying): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * record-full.c (record_full_wait_1): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * regcache.c (cooked_read_test): Remove reference to global thread_list. * remote-sim.c (gdbsim_target::create_inferior): Don't call init_thread_list here. * remote.c (remote_target::update_thread_list): Use all_threads_safe instead of ALL_NON_EXITED_THREADS. (remote_target::process_initial_stop_replies): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::open_1): Don't call init_thread_list here. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::commit_resume) (remote_target::remove_new_fork_children): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::kill_new_fork_children): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove init_thread_list and init_wait_for_inferior calls. (remote_target::remote_btrace_maybe_reopen) (remote_target::thread_handle_to_thread_info): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * target.c (target_terminal::restore_inferior) (target_terminal_is_ours_kind): Replace ALL_INFERIORS with all_non_exited_inferiors. * thread-iter.c: New file. * thread-iter.h: New file. * thread.c: Include "inline-frame.h". (thread_list): Delete. (clear_thread_inferior_resources): Call clear_inline_frame_state. (init_thread_list): Use all_threads_safe instead of ALL_THREADS_SAFE. Adjust to per-inferior thread lists. (new_thread): Adjust to per-inferior thread lists. (add_thread_silent): Pass inferior to find_thread_ptid. (thread_info::deletable): New, moved from the header. (delete_thread_1): Adjust to per-inferior thread lists. (find_thread_global_id): Use inf->threads(). (find_thread_ptid): Use find_inferior_ptid and pass inferior to find_thread_ptid. (find_thread_ptid(inferior*, ptid_t)): New overload. (iterate_over_threads): Use all_threads_safe. (any_thread_p): New. (thread_count): Use all_threads and std::distance. (live_threads_count): Use all_non_exited_threads and std::distance. (valid_global_thread_id): Use all_threads. (in_thread_list): Use find_thread_ptid. (first_thread_of_inferior): Adjust to per-inferior thread lists. (any_thread_of_inferior, any_live_thread_of_inferior): Use inf->non_exited_threads(). (prune_threads, delete_exited_threads): Use all_threads_safe. (thread_change_ptid): Pass inferior pointer to find_thread_ptid. (set_resumed, set_running): Use all_non_exited_threads. (is_thread_state, is_stopped, is_exited, is_running) (is_executing): Delete. (set_executing, set_stop_requested, finish_thread_state): Use all_non_exited_threads. (print_thread_info_1): Use all_inferiors and all_threads. (thread_apply_all_command): Use all_non_exited_threads. (thread_find_command): Use all_threads. (update_threads_executing): Use all_non_exited_threads. * tid-parse.c (parse_thread_id): Use inf->threads. * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-21gdb/riscv: Add target description supportAndrew Burgess1-0/+2
This commit adds target description support for riscv. I've used the split feature approach for specifying the architectural features, and the CSR feature is auto-generated from the riscv-opc.h header file. If the target doesn't provide a suitable target description then GDB will build one by looking at the bfd headers. This commit does not implement target description creation for the Linux or FreeBSD native targets, both of these will need to add read_description methods into their respective target classes, which probe the target features, and then call riscv_create_target_description to build a suitable target description. Until this is done Linux and FreeBSD will get the same default target description based on the bfd that bare-metal targets get. I've only added feature descriptions for 32 and 64 bit registers, 128 bit registers (for RISC-V) are not supported in the reset of GDB yet. This commit removes the special reading of the MISA register in order to establish the target features, this was only used for figuring out the f-register size, and even that wasn't done consistently. We now rely on the target to tell us what size of registers it has (or look in the BFD as a last resort). The result of this is that we should now support RV64 targets with 32-bit float, though I have not extensively tested this combination yet. * Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o. (HFILES_NO_SRCDIR): Add arch/riscv.h. * arch/riscv.c: New file. * arch/riscv.h: New file. * configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into this list, and add arch/riscv.o. * features/Makefile: Add riscv features. * features/riscv/32bit-cpu.c: New file. * features/riscv/32bit-cpu.xml: New file. * features/riscv/32bit-csr.c: New file. * features/riscv/32bit-csr.xml: New file. * features/riscv/32bit-fpu.c: New file. * features/riscv/32bit-fpu.xml: New file. * features/riscv/64bit-cpu.c: New file. * features/riscv/64bit-cpu.xml: New file. * features/riscv/64bit-csr.c: New file. * features/riscv/64bit-csr.xml: New file. * features/riscv/64bit-fpu.c: New file. * features/riscv/64bit-fpu.xml: New file. * features/riscv/rebuild-csr-xml.sh: New file. * riscv-tdep.c: Add 'arch/riscv.h' include. (riscv_gdb_reg_names): Delete. (csr_reggroup): New global. (struct riscv_register_alias): Delete. (struct riscv_register_feature): New structure. (riscv_register_aliases): Delete. (riscv_xreg_feature): New global. (riscv_freg_feature): New global. (riscv_virtual_feature): New global. (riscv_csr_feature): New global. (riscv_create_csr_aliases): New function. (riscv_read_misa_reg): Delete. (riscv_has_feature): Delete. (riscv_isa_xlen): Simplify, just return cached xlen. (riscv_isa_flen): Simplify, just return cached flen. (riscv_has_fp_abi): Update for changes in struct gdbarch_tdep. (riscv_register_name): Update to make use of tdesc_register_name. Look up xreg and freg names in the new globals riscv_xreg_feature and riscv_freg_feature. Don't supply csr aliases here. (riscv_fpreg_q_type): Delete. (riscv_register_type): Use tdesc_register_type in almost all cases, override the returned type in a few specific cases only. (riscv_print_one_register_info): Handle errors reading registers. (riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for registers that are otherwise unknown to GDB. Also check the csr_reggroup. (riscv_print_registers_info): Remove assert about upper register number, and use gdbarch_register_reggroup_p instead of short-cutting. (riscv_find_default_target_description): New function. (riscv_check_tdesc_feature): New function. (riscv_add_reggroups): New function. (riscv_setup_register_aliases): New function. (riscv_init_reggroups): New function. (_initialize_riscv_tdep): Add calls to setup CSR aliases, and setup register groups. Register new riscv debug variable. * riscv-tdep.h: Add 'arch/riscv.h' include. (struct gdbarch_tdep): Remove abi union, and add riscv_gdbarch_features field. Remove cached quad floating point type, and provide initialisation for double type field. * target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to the list of targets using the feature based target descriptions. * NEWS: Mention target description support. gdb/doc/ChangeLog: * gdb.texinfo (Standard Target Features): Add RISC-V Features sub-section.
2018-11-15Move copy_bitwise unittests to own unittest fileJoel Brobecker1-0/+1
Now that copy_bitwise has been made public, and considering that its implementation could move to a different file again in the future, this patch moves its unittest to its own file in gdb/unittests. gdb/ChangeLog: * unittests/copy_bitwise-selftests.c: New file. * utils.c (selftests::bits_to_str, selftests::check_copy_bitwise) (selftests::copy_bitwise_tests): Delete, moving this code to unittests/copy_bitwise-selftests.c instead. (_initialize_utils): Do not register copy_bitwise tests. * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add unittests/copy_bitwise-selftests.c. Tested on x86_64-linux using the official testsuite, but also by verifying that "maintenance selftests" still runs the copy_bitwise tests.
2018-11-02(Ada) Add ravenscar tasking support on AArch64Joel Brobecker1-0/+3
This patch adds support for debugging Ravenscar tasks, similar to what is done for ppc and sparc. gdb/ChangeLog: * aarch64-ravenscar-thread.h, aarch64-ravenscar-thread.c: New files. * aarch64-tdep.c: #include "aarch64-ravenscar-thread.h". (aarch64_gdbarch_init): Add call to register_aarch64_ravenscar_ops. * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-ravenscar-thread.o. (HFILES_NO_SRCDIR): Add aarch64-ravenscar-thread.h. (ALLDEPFILES): Add aarch64-ravenscar-thread.c. * configure.tgt (cpu_obs) [aarch64*-*-*]: Add ravenscar-thread.o and aarch64-ravenscar-thread.o. * NEWS: Add entry documenting Ravenscar tasking support on AArch64 ELF.
2018-11-01arm-pikeos: software single stepJerome Guitton1-0/+1
On ARM, PikeOS does not support hardware single step, causing various semi-random errors when trying to next/step over some user code. So this patch changes this target to use software-single-step instead. The challenge is that, up to now, the PikeOS target was in all respects identical to a baremetal target as far as GDB was concerned, meaning we were using the baremetal osabi for this target too. This is no longer possible, and we need to introduce a new OSABI variant. Unfortunately, there isn't anything in the object file that would allow us to differentiate between the two platforms. So we have to rely on a heuristic instead, where we look for some known symbols that are required in a PikeOS application (these symbols are expected to be defined by the default linker script, and correspond to routines used to allocate the application stack). For the long run, the hope is that the stub implementation provided by PikeOS is enhanced so that it includes vContSupported+ to the $qSupported query, and then that the reply to the "vCont?" query only return support for "continue" operations (thus exclusing "step" operations). We could then use that information to reliably determine at connection time that the target does not support single-stepping and therefore automatically turn software single-stepping automatically based on it. gdb/ChangeLog: * defs.h (enum gdb_osabi): Add GDB_OSABI_PIKEOS. * osabi.c (gdb_osabi_names): Add name for GDB_OSABI_PIKEOS. * arm-pikeos-tdep.c: New file. * configure.tgt: Add arm-pikeos-tdep.o to the case of ARM embedded system. * Makefile.in (ALL_TARGET_OBS): Add arm-pikeos-tdep.o. Tested on arm-pikeos and arm-elf using AdaCore's testsuite. We also evaluated it on armhf-linux as a cross platform.
2018-10-27Move mkdir_recursive to common/filestuff.cTom Tromey1-0/+1
This moves mkdir_recursive from dwarf-index-cache.c to common/filestuff.c, and also changes it to return a boolean that says whether or not it worked. gdb/ChangeLog 2018-10-27 Tom Tromey <tom@tromey.com> * unittests/mkdir-recursive-selftests.c: New file. * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add unittests/mkdir-recursive-selftests.c. * dwarf-index-cache.c (mkdir_recursive): Move to common/filestuff.c. (index_cache::store): Check return value of mkdir_recursive. (create_dir_and_check, test_mkdir_recursive): Move to new file. (_initialize_index_cache): Don't register test. * common/filestuff.h (mkdir_recursive): Declare. * common/filestuff.c (mkdir_recursive): Move from dwarf-index-cache.c. Return bool.
2018-10-23GDB: New target s12zJohn Darrington1-0/+1
gdb/ * configure.tgt: Add configuration for s12z. * s12z-tdep.c: New file. * NEWS: Mention new target.
2018-10-08Add native target for FreeBSD/riscv.John Baldwin1-0/+1
gdb/ChangeLog: * Makefile.in (ALLDEPFILES): Add riscv-fbsd-nat.c. * NEWS: Mention new FreeBSD/riscv native configuration. * configure.host: Add riscv*-*-freebsd*. * configure.nat: Likewise. * riscv-fbsd-nat.c: New file. gdb/doc/ChangeLog: * gdb.texinfo (Contributors): Add SRI International and University of Cambridge for FreeBSD/riscv.
2018-10-08Add FreeBSD/riscv architecture.John Baldwin1-0/+3
Support for collecting and supplying general purpose and floating point register sets is provided along with signal frame unwinding. FreeBSD only supports RV64 currently, so while some provision is made for RV32 in the general-purpose register set, the changes have only been tested on RV64. gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add riscv-fbsd-tdep.o. (HFILES_NO_SRCDIR): Add riscv-fbsd-tdep.h. (ALLDEPFILES): Add riscv-fbsd-tdep.c. * NEWS: Mention new FreeBSD/riscv target. * configure.tgt: Add riscv*-*-freebsd*. * riscv-fbsd-tdep.c: New file. * riscv-fbsd-tdep.h: New file.
2018-10-06Do not accidentally include in-tree readline headersTom Tromey1-2/+1
PR build/17077 points out that when --with-system-readline is given, gdb will still pick up the in-tree readline headers. Normally this is not a big problem, because readline is very stable and so the ABI does not change much; but it is clearly a bug to do this, and could bite at some point. The basic problem is that OPCODES_CFLAGS uses -I$(OPCODES_SRC)/.. so that #include "opcodes/..." works. However, this also makes it so the This patch fixes the problem in a mildly hacky way: remove the offending -I option, and change gdb to use #include "../opcodes/..." instead. This continues to make it clear where the header comes from, without allowing incorrect behavior. Tested by rebuilding and then looking at the *.Po files. gdb/ChangeLog 2018-10-06 Tom Tromey <tom@tromey.com> PR build/17077: * Makefile.in (OPCODES_CFLAGS): Remove "-I$(OPCODES_SRC)/..". * arc-tdep.c, frv-tdep.c, lm32-tdep.c, mep-tdep.c, microblaze-tdep.c, or1k-tdep.h: Use ../opcodes, not opcodes, in #include.
2018-10-02Allow remote debugging over a Unix local domain socket.John Darrington1-0/+1
Extend the "target remote" and "target extended-remote" commands such that if the filename provided is a Unix local domain (AF_UNIX) socket, then it'll be treated as such, instead of trying to open it as if it were a character device. gdb/ChangeLog: * NEWS: Mention changed commands. * ser-uds.c: New file. * configure.ac (SER_HARDWIRE): Add ser-uds.o. * configure: Regenerate. * Makefile.in: Add new file. * serial.c (serial_open): Check if filename is a socket and lookup the appropriate interface accordingly. gdb/doc/ChangeLog: * gdb.texinfo (Remote Connection Commands): Describe the changes to target remote and target extended-remote relating to Unix domain sockets.
2018-10-01Move duplicated code to common/gdb_proc_service.hGary Benson1-0/+1
This commit moves now-identical code from gdb/gdb_proc_service.h and gdb/gdbserver/gdb_proc_service.h into the new shared file gdb/common/gdb_proc_service.h. gdb/ChangeLog: * common/gdb_proc_service.h: New file, factored out from... * gdb_proc_service.h: Moved common code to the above file. * Makefile.in (HFILES_NO_SRCDIR): Add the above new file. gdb/gdbserver/ChangeLog: * gdb_proc_service.h: Moved common code to common/gdb_proc_service.h.
generated by cgit v1.1 at 2024-12-04 08:43:19 +0000