aboutsummaryrefslogtreecommitdiff
path: root/gdb/Makefile.in
AgeCommit message (Collapse)AuthorFilesLines
2001-07-10* mcore-rom.c: Include "serial.h".Andrew Cagney1-1/+1
* Makefile.in (mcore-rom.o): Depends on "serial.h".
2001-07-10m88k builds. Tweek remote-bug.c to include "serial.h".Andrew Cagney1-1/+1
2001-07-10* remote-utils.h (struct serial): Declare as opaque. RemoveAndrew Cagney1-1/+1
include of "serial.h". * Makefile.in (remote_utils_h): Update. * monitor.h (struct serial): Declare as opaque. Remove include of "serial.h". (struct monitor_ops): Replace serial_t with `struct serial *'. * monitor.c (monitor_desc): Ditto.
2001-07-08* ser-mac.c: Make obsolete.Andrew Cagney1-1/+1
* Makefile.in (ser-mac.o): Ditto.
2001-06-28Exterminate ser-ocd.c.Andrew Cagney1-3/+1
2001-06-10Add missing $(ui_out_h) dependencies.Andrew Cagney1-9/+11
2001-05-26 * Makefile.in (osfsolib.c, osfsolib.o): Rename to solib-osf.c andNicholas Duffek1-3/+3
solib-osf.o. * config/alpha/alpha-osf1.mh (NATDEPFILES): Replace osfsolib.o with solib-osf.o and solib.o. * config/alpha/alpha-osf2.mh: Likewise. * config/alpha/alpha-osf3.mh: Likewise. * solib-osf.c: New file, renamed and largely rewritten from osfsolib.c.
2001-05-22Add support for the GNU V3 C++ ABI.Jim Blandy1-3/+5
(Includes changes by Dan Berlin.) * gnu-v3-abi.c: New file. * minsyms.c: #include "value.h" and "cp-abi.h". (install_minimal_symbols): Check the minimal symbol table for symbols that look mangled in the V3 style, and select the V3 ABI if we find any. * Makefile.in (SFILES): Add gnu-v3-abi.c. (COMMON_OBS): Add gnu-v3-abi.o. (gnu-v3-abi.o): Add new rule. (minsyms.o): Depend on $(cp_abi_h) and $(value_h).
2001-05-12* Makefile.in (gnu-v2-abi.o): Add $(demangle_h) to list ofJim Blandy1-2/+2
dependencies. Reorder dependencies to match #includes in file, for easier verification.
2001-05-12Replace Makefile.in:VERSION with the file version.in.Andrew Cagney1-8/+8
2001-05-10Fix -Werror problem with mi-main.c.Andrew Cagney1-1/+1
2001-05-10 * Makefile.in (SUBDIR_GDBTK_OBS): Add gdbtk-bp.o, gdbtk-register.oKeith Seitz1-10/+38
and gdbtk-stack.o. (SUBDIR_GDBTK_SRCS): Ditto for the sources. (gdbtk-bp.o): New rule. (gdbtk-register.o): New rule. (gdbtk-stack.o): New rule. (gdbtk-cmds.o): Update dependencies. (gdbtk.o): Ditto. (gdbtk-hooks.o): Ditto. (gdbtk-varobj.o): Ditto.
2001-05-09* Makefile.in (mn10300-tdep.o): New rule.Jim Blandy1-117/+122
* Makefile.in (gdb_string_h): Define. Use it throughout. Some rules were already using this, even though it isn't defined.
2001-05-09* Makefile.in (obstack_h, target_h): Define; these are alreadyJim Blandy1-0/+3
used elsewhere, but have been expanding to the empty string. (memattr_h): Define; needed by target_h.
2001-05-012001-05-01 Michael Snyder <msnyder@redhat.com>Michael Snyder1-0/+10
* Makefile.in: Add rules for thread-db.o, lin-lwp.o, proc-service.o.
2001-04-27(Changes from Daniel Berlin, with revisions by Jim Blandy.)Jim Blandy1-12/+24
Abstract out operations specific to particular C++ ABI's, and invoke them through a function table. This removes the C++ ABI dependencies scattered throughout the code, and allows us to cleanly add support for new C++ ABI's. * cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files. * c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c, jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c: #include "cp-abi.h". These files all use functions now declared there. * symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P): Deleted. These services are now provided by functions declared in cp-abi.h. * value.h (value_rtti_type, value_virtual_fn_field): Same. * values.c (value_virtual_fn_field): Same, for this definition. * valops.c (value_rtti_type): Same. * c-typeprint.c (c_type_print_base): Use the functions from "cp-abi.h", instead of the old macros, or hard-coded ABI-specific tests. * dbxread.c (record_minimal_symbol): Same. * gdbtypes.c (get_destructor_fn_field, virtual_base_index, virtual_base_index_skip_primaries): Same. * jv-typeprint.c (java_type_print_base): Same. * linespec.c (find_methods, decode_line_1): Same. * symtab.c (gdb_mangle_name): Same. * Makefile.in (SFILES): Add the new .c files mentioned above. (cp_abi_h): New variable. (COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o. (cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets. (c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o, jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add dependency on $(cp_abi_h).
2001-04-17Obsolete NEWS and ISI systems (along with a few redundant m68k targets).Andrew Cagney1-4/+6
2001-04-11Obsolete sun386i.Andrew Cagney1-2/+2
2001-04-05Obsolete a29k-*-* host and a29k-*-sym1* and a29k-*-kern* targets.Andrew Cagney1-3/+2
2001-04-02Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* andAndrew Cagney1-4/+4
ns32k-utek-*.
2001-03-23Obsolete stuff.c and kdb-start.c.Andrew Cagney1-8/+0
2001-03-21 Unified support for hardware breakpoints and watchpoints onEli Zaretskii1-1/+3
x86 targets: * config/i386/nm-i386.h: New file. * config/i386/nm-i386.h: (i386_cleanup_dregs) (i386_insert_watchpoint, i386_remove_watchpoint) (i386_region_ok_for_watchpoint, i386_stopped_by_hwbp) (i386_stopped_data_address, i386_insert_hw_breakpoint) (i386_remove_hw_breakpoint): Declare prototypes. [I386_USE_GENERIC_WATCHPOINTS] (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define if not already defined. (TARGET_REGION_OK_FOR_HW_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT) (STOPPED_BY_WATCHPOINT, target_stopped_data_address) (target_insert_watchpoint, target_remove_watchpoint) (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Define to call the appropriate i386_* functions. * i386-nat.c: New file. * i386-nat.c (I386_DR_CONTROL_MASK, I386_DR_LOCAL_ENABLE) (I386_DR_GLOBAL_ENABLE, I386_DR_DISABLE, I386_DR_SET_RW_LEN) (I386_DR_GET_RW_LEN, I386_DR_WATCH_HIT): New macros. (dr_mirror, dr_status_mirror, dr_control_mirror, dr_ref_count) (maint_show_dr): New variables. (i386_cleanup_dregs, i386_show_dr, i386_length_and_rw_bits) (i386_insert_aligned_watchpoint, i386_remove_aligned_watchpoint) (i386_handle_nonaligned_watchpoint, i386_insert_watchpoint) (i386_remove_watchpoint, i386_region_ok_for_watchpoint) (i386_stopped_data_address, i386_stopped_by_hwbp) (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): New functions. (_initialize_i386_nat): New function. [I386_USE_GENERIC_WATCHPOINTS]: Add new maint command `show-debug-regs', sets maint_show_dr to non-zero value and activates debugging print-outs in functions which insert, remove, and test watchpoints and hardware breakpoints. * Makefile.in (i386-nat.o): New target. (ALLDEPFILES): Add i386-nat.o.
2001-03-20* Makefile.in: Clean up dependencies on ../include/demangle.h.Jim Blandy1-3/+4
(demangle_h): New variable. (jv-typeprint.o, jv-valprint.o, linespec.o): Use it.
2001-03-10Cleanup solib-svr4.c by moving legacy code out to its own file.Kevin Buettner1-1/+3
2001-03-09Delete make rules for obsolete files.Andrew Cagney1-18/+0
2001-03-07Remove local change that wasn't supposed to be committed.J.T. Conklin1-3/+0
2001-03-072001-03-06 J.T. Conklin <jtc@redback.com>J.T. Conklin1-1/+6
* symtab.h (decode_line_1): Removed declaration. * symfile.c (#include <assert.h>): Removed. * arch-utils.c (#include <ctype.h>): Removed. * c-typeprint.c: Likewise. * dbxread.c: Likewise. * gdbtypes.c: Likewise. * target.c: Likewise. * os9kread.c: Likewise. * c-valprint.c (#include "demangle.h"): Removed. * ch-typeprint.c: Likewise. * eval.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * m2-typeprint.c: Likewise. * typeprint.c: Likewise. * p-typeprint.c: Likewise. * valarith.c: Likewise. * valprint.c: Likewise. * m2-typeprint.c (#include "gdb_string.h"): Removed. * nlmread.c: Likewise. * mdebugread.c (#include "gdb-stabs.h"): Removed. * minsyms.c: Likewise. * mipsread.c: Likewise. * nlmread.c: Likewise. * m2-typeprint.c (#include "obstack.h"): Removed. * m2-valprint.c: Likewise. * event-loop.c (#include <setjmp.h>): Removed.
2001-03-06Update/correct copyright notices.Kevin Buettner1-2/+2
2001-03-05* ocd.h (ocd_xfer_memory): Add ``attrib'' parameter.Andrew Cagney1-1/+3
* ocd.c (ocd_xfer_memory): Ditto. * ser-ocd.c (ocd_setstopbits): New function. Add to ocd_ops. * MAINTAINERS: Document powerpc-eabi and powerpcle-eabi as buildable with ,-Werror. * Makefile.in (symfile_h): Define. (mcore-tdep.o): Add $(symfile_h), $(gdbcore_h) and $(inferior_h). * mcore-tdep.c: Include "symfile.h", "gdbcore.h" and "inferior.h". * MAINTAINERS: Document mcore-elf and mcore-pe as buildable with ,-Werror. * dsrec.c (make_srec): Fix internal_error fmt arg. * MAINTAINERS: Document i960-coff as buildable with ,-Werror.
2001-03-01* Makefile.in (os9kread.o): Do not compile with WERROR_CFLAGS.Andrew Cagney1-3/+6
* os9kread.c (os9k_process_one_symbol): Add assert to detect ``loses if sizeof (char *) > sizeof (int)''.
2001-03-01* Makefile.in (gdbtk-cmds.o): Add $(regcache_h) to dependencyAndrew Cagney1-2/+2
lists. (mi-main.o): Ditto.
2001-03-01* Makefile.in (regcache_h): Define. Add $(regcache_h) toAndrew Cagney1-109/+133
dependency lists.
2001-02-20Move frame specific register code to the new file frame.c.Andrew Cagney1-2/+6
2001-02-18 * go32-nat.c: Include i387-nat.h.Eli Zaretskii1-1/+1
(fetch_register): New function, uses some of the guts of go32_fetch_registers and i387_supply_register. (go32_fetch_registers): Most of the code moved into fetch_register. Use i387_supply_fsave. (store_register): Use i387_fill_fsave instead of custom code. (go32_store_registers): Use i387_fill_fsave. * Makefile.in (go32-nat.o): Depend on i387-nat.h. * config/i386/go32.mh (NATDEPFILES): Add i387-nat.o.
2001-02-09 Updates to "make TAGS":Jim Kingdon1-6/+5
* Makefile.in (ALLDEPFILES): Remove altos-xdep.c arm-convert.s arm-xdep.c convex-tdep.c convex-xdep.c pyr-tdep.c pyr-xdep.c tahoe-tdep.c. (TAGFILES_NO_SRCDIR): Add $(SUBDIR_CLI_SRCS).
2001-02-06* signals.h: Removed.J.T. Conklin1-8/+8
* event-top.c (#include <signal.h>): Changed from signals.h. * inflow.c: Likewise. * mac-xdep.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * standalone.c: Likewise. * top.c: Likewise. * utils.c: Likewise. * Makefile.in: Removed signals.h from dependencies.
2001-02-02* monitor.c (#include "gdb_wait.h"): Removed.J.T. Conklin1-26/+26
* ocd.c: Likewise. * ppc-bdm.c: Likewise. * remote-adapt.c: Likewise. * remote-array.c: Likewise. * remote-bug.c: Likewise. * remote-e7000.c: Likewise. * remote-eb.c: Likewise. * remote-es.c: Likewise. * remote-mips.c: Likewise. * remote-mm.c: Likewise. * remote-nindy.c: Likewise. * remote-os9k.c: Likewise. * remote-rdi.c: Likewise. * remote-rdp.c: Likewise. * remote-sds.c: Likewise. * remote-sim.c: Likewise. * remote-st.c: Likewise. * remote-udi.c: Likewise. * remote-vx.c: Likewise. * remote-vx29k.c: Likewise. * remote-vx68.c: Likewise. * remote-vx960.c: Likewise. * remote-vxmips.c: Likewise. * remote-vxsparc.c: Likewise. * remote.c: Likewise. * ser-pipe.c: Likewise. * ser-unix.c: Likewise. * Makefile.in: Updated dependencies. -------------------------------------------------------------------
2001-01-23* exec.c (xfer_memory): Add attrib argument.J.T. Conklin1-4/+5
* infptrace.c (child_xfer_memory): Likewise. * monitor.c (monitor_xfer_memory): Likewise. * remote-adapt.c (adapt_xfer_inferior_memory): Likewise. * remote-array.c (array_xfer_memory): Likewise. * remote-bug.c (bug_xfer_memory): Likewise. * remote-e7000.c (e7000_xfer_inferior_memory): Likewise. * remote-eb.c (eb_xfer_inferior_memory): Likewise. * remote-es.c (es1800_xfer_inferior_memory): Likewise. * remote-mips.c (mips_xfer_memory): Likewise. * remote-mm.c (mm_xfer_inferior_memory): Likewise. * remote-nindy.c (nindy_xfer_inferior_memory): Likewise. * remote-os9k.c (rombug_xfer_inferior_memory): Likewise. * remote-rdi.c (arm_rdi_xfer_memory): Likewise. * remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise. * remote-sds.c (sds_xfer_memory): Likewise. * remote-sim.c (gdbsim_xfer_inferior_memory): Likewise. * remote-st.c (st2000_xfer_inferior_memory): Likewise. * remote-udi.c (udi_xfer_inferior_memory): Likewise. * remote-vx.c (vx_xfer_memory): Likewise. * remote.c (remote_xfer_memory): Likewise. * target.c (debug_to_xfer_memory, do_xfer_memory): Likewise. * target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise. * target.h (#include "memattr.h"): Added. (target_ops.to_xfer_memory): Add attrib argument. * wince.c (_initialize_inftarg): Removed call to set_dcache_state. * dcache.h (set_dcache_state): Removed declaration. * dcache.c (set_dcache_state): Removed definition * dcache.c: Update module comment, as dcache is now enabled and disabled with memory region attributes instead of by the global variable "remotecache". Add comment describing the interaction between dcache and memory region attributes. (dcache_xfer_memory): Add comment describing benefits of moving cache writeback to a higher level. (dcache_struct): Removed cache_has_stuff field. This was used to record whether the cache had been accessed in order to invalidate it when it was disabled. However, this is not needed because the cache is write through and the code that enables, disables, and deletes memory regions invalidate the cache. Add comment which suggests that we could be more selective and only invalidate those cache lines containing data from those memory regions. (dcache_invalidate): Updated. (dcache_xfer_memory): Updated. (dcache_alloc): Don't abort() if dcache_enabled_p is clear. (dcache_xfer_memory): Removed code that called do_xfer_memory() to perform a uncached transfer if dcache_enabled_p was clear. This function is now only called if caching is enabled for the memory region. (dcache_info): Always print cache info. * target.c (do_xfer_memory): Add attrib argument. (target_xfer_memory, target_xfer_memory_partial): Break transfer into chunks defined by memory regions, pass region attributes to do_xfer_memory(). * dcache.c (dcache_read_line, dcache_write_line): Likewise. * Makefile.in (SFILES): Add memattr.c. (COMMON_OBS): Add memattr.o. (dcache.o): Add target.h to dependencies. * memattr.c: New file. * memattr.h: Likewise.
2001-01-082001-01-08 Fernando Nasser <fnasser@redhat.com>Fernando Nasser1-5/+8
* Makefile.in (install-gdbtk): Add .itcl files to the list of files to be installed.
2001-01-04 * Makefile.in (SUBDIR_CLI_OBS): Add cli/cli-utils.o.Nicholas Duffek1-2/+7
(SUBDIR_CLI_SRCS): Add cli/cli-utils.c. (cli_utils_h): New variable. (cli/cli-utils.o): New rule. * cli/cli-utils.c: New file. * cli/cli-utils.h: New file.
2000-12-212000-12-20 Fernando Nasser <fnasser@redhat.com>Fernando Nasser1-2/+2
* configure.in: Rename CONFIG_LOBS to CONFIG_LIB_OBS. * Makefile.in: Ditto. * configure: Regenerate.
2000-12-202000-12-20 Fernando Nasser <fnasser@redhat.com>Fernando Nasser1-2/+5
* Makefile.in (UIOUT_CFLAGS): New macro. CFLAGS needed for uiout code to be compiled. Defines UI_OUT. (SUBDIR_MI_CFLAGS): Defines MI_OUT, not UI_OUT. (INTERNAL_WARN_CFLAGS): Also include UIOUT_CFLAGS. * configure.in (UIOUT_CFLAGS): New configuration variable. (--with-uiout): New configuration option. Causes uiout code to be compiled, instead of the old *printf one. * configure: Regenerate. * top.c (print_gdb_version): Test for and print MI_OUT, not UI_OUT. * testsuite/lib/mi-support.exp (mi_gdb_start): Test for MI_OUT, not UI_OUT.
2000-12-112000-12-11 Fernando Nasser <fnasser@redhat.com>Fernando Nasser1-7/+10
* Makefile.in (CONFIG_LOBS): New macro. Configured to the files that must be added to the gdblib itself. (DEPFILES): Use CONFIG_LOBS, not CONFIG_OBS. (INIT_FILES): Include CONFIG_OBS. (gdb$(EXEEXT)): Depend on CONFIG_OBS and link with it. (kdb): Ditto. * configure.in (CONFIG_LOBS): New variable. Object files that must be added to gdblib for the specific configuration. * configure: Regenerate.
2000-12-112000-12-11 Fernando Nasser <fnasser@redhat.com>Fernando Nasser1-2/+14
* Makefile.in (SUBDIR_GDBTK_OBS, SUBDIR_GDBTK_SRCS, SUBDIR_GDBTK_DEPS, SUBDIR_GDBTK_INITS, SUBDIR_GDBTK_LDFLAGS, SUBDIR_GDBTK_CFLAGS): New macros. For gdbtk subdir. * configure.in: Fix typo. It is CONFIG_OBS not CONFIG_OJS. Use the SUBDIR_GDBTK_* macros instead of hard coded file names. * configure: Regenerate.
2000-12-04* Makefile.in (symfile.o): Add gdb-stabs.h to dependencies list.Mark Kettenis1-3/+3
2000-12-02Really check-in:Andrew Cagney1-1/+2
* Makefile.in (varobj.o): Delete special .c.o rule supressing -Werror flag.
2000-12-012000-12-01 Fernando Nasser <fnasser@redhat.com>Fernando Nasser1-5/+52
* cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-012000-11-30 Fernando Nasser <fnasser@redhat.com>Fernando Nasser1-14/+19
* linespec.h: New file. Declarations for linespec.c. * linespec.c, alpha-tdep.c, breakpoint.c, parse.c, source.c, symtab.c, tracepoint.c: Include the above. * completer.c: New file. Line completion stuff for GDB. (get_gdb_completer_word_break_characters, get_gdb_completer_quote_characters): New functions. Accessors for useful completer internal data. (filename_completer, line_completion_function, skip_quoted): Moved here from top.c. * completer.h: New file. Declarations for the above. * linespec.c (decode_line_1): Use get_gdb_completer_word_break_characters and get_gdb_completer_quote_characters. * top.c: Include completer.h. (filename_completer, line_completion_function, skip_quoted): Moved to completer.c. * corefile.c, exec.c, source.c, symfile.c, linespec.c: Include completer.h. * Makefile.in (SFILES): Add completer.c. (COMMON_OBS): Add completer.o. (completer.o): New target. (linespec.o, alpha-tdep.o, breakpoint.o, parse.o, source.o, symtab.o, tracepoint.o): Add linespec.h to dependencies list. (corefile.o, exec.o, source.o, symfile.o, linespec.o): Add completer.h to dependencies list.
2000-11-102000-11-10 Fernando Nasser <fnasser@totem.toronto.redhat.com>Fernando Nasser1-2/+5
* symtab.c (decode_line_1, total_number_of_methods, find_methods, build_command_line_spec, find_toplevel_char, decode_line_2): Move to linespec.c. * linespec.c: New file. Routines that handle linespecs, formerly in symtab.c. * symtab.h: Export find_line_symtab and find_function_start_sal, * Makefile.in: Add linespec.c.
2000-11-09 Add auto-solib-add support for AIX, remove obsolete and unusedPeter Schauer1-3/+4
SOLIB_SYMBOLS_MANUAL code, cleanup of AIX shared library handling code. * rs6000-nat.c (vmap_symtab): Do not try to modify offsets if symbols are not yet loaded. (vmap_add_symbols): New function to add symbols for a vmap entry. (add_vmap): Turn errors into warnings, return NULL vmap upon failure. Add symbols via vmap_add_symbols only if requested. (xcoff_relocate_core): Allow debugging of core files without an executable file. Handle NULL returns from add_vmap gracefully. * xcoffsolib.c (solib_add): Remove, no longer needed. (solib_info): Do not check for new shared libraries if there is no inferior process. (sharedlibrary_command): Made static. Do not check for new shared libraries if there is no inferior process. Add symbols for requested shared libraries via vmap_add_symbols. (_initialize_solib): Add `set auto-solib-add' command. * xcoffsolib.h (vmap_add_symbols): Add prototype declaration. * config/rs6000/tm-rs6000.h (PC_LOAD_SEGMENT): Move from here ... * config/rs6000/nm-rs6000.h: ... to here, this is an AIX native feature. * config/powerpc/tm-macos.h, config/powerpc/tm-ppc-eabi.h, config/powerpc/tm-ppc-nw.h, config/rs6000/tm-rs6000ly.h: Remove #undef PC_LOAD_SEGMENT. * config/powerpc/aix.mt, config/rs6000/aix4.mt, config/rs6000/rs6000.mt (TDEPFILES): Move xcoffsolib.o from here ... * config/powerpc/aix.mh, config/rs6000/aix4.mh, config/rs6000/rs6000.mh (NATDEPFILES): ... to here, xcoffsolib.o contains AIX native code only. * rs6000-tdep.c: Remove #include xcoffsolib.h, no longer needed. * xcoffsolib.h (xcoff_relocate_symtab_hook): Remove declaration. * rs6000-nat.c (_initialize_core_rs6000): Remove setting of xcoff_relocate_symtab_hook, no longer needed. * xcoffsolib.c (solib_info, sharedlibrary_command): Remove xcoff_relocate_symtab_hook indirection, call xcoff_relocate_symtab directly, as xcoffsolib.c is now compiled in native AIX configurations only. * Makefile.in: Update dependencies for rs6000-tdep.o, rs6000-nat.o and xcoffsolib.o.
generated by cgit v1.1 at 2025-01-12 04:09:47 +0000