Age | Commit message (Collapse) | Author | Files | Lines |
|
function call, in order to avoid indent reformatting this part
of the code in an unreadable way.
|
|
when breakpoints fail. Move general breakpoint error messages to
insert_breakpoints.
* breakpoint.c (insert_breakpoints): Change warnings when
breakpoints are nto inserted to specify the type. Remove call to
memory_error when hardware breakpoints can't be inserted. Remove
multiple calls to warning so all messages are sent to the user at
once.
(delete_breakpoints): Make insert error messsages more explicit.
|
|
gdbserver/ChangeLog.
|
|
(i386_svr4_init_abi): Set in_solib_call_trampoline and
skip_trampoline_code.
* config/i386/tm-i386v4.h: Don't include "config/tm-sysv4.h".
(CPLUS_MARKER): Define to '.'.
|
|
member.
(linux_corefile_thread_callback): Increase args->num_notes.
(linux_make_note_section): Initialize thread_args.num_notes, and
use it to determine whether notes for any threads were created.
|
|
corresponding macro is not defined. Likewise for PCNICE, PCSHOLD
and PCUNKILL.
(write_with_trace): Conditionalize out the switch branch handling
PCSHOLD if the corresponding macro is not defined. Likewise for
PRSABORT and PRSTOP.
This change will be needed by the Interix port.
|
|
* rs6000-tdep.c (struct rs6000_framedata): Add saved_ev and
ev_offset fields.
(skip_prologue): Add support for BookE/e500 instructions.
(e500_extract_return_value): New function.
(frame_get_saved_regs): Add support for saving ev registers and
pseudo gpr's.
(e500_store_return_value): New function.
(rs6000_gdbarch_init): Move up default intializations of
deprecated_extract_return_value and store_return_value. Overwrite
init of store_return_value with e500 specific version.
Set extract_return_value for e500.
|
|
* blockframe.c (generic_call_dummy_register_unwind): Use
regcache_cooked_read to catch cases in which the variable is
stored in a pseudo register.
|
|
|
|
detach to allow reinitialization.
|
|
* MAINTAINERS: Change the s390 target to s390-linux-gnu (second
attempt).
|
|
number table from disk if the image file doesn't have a symbol
table; we'll never actually look at the info anyway, and Windows
ships DLL's with bogus file offsets for the line number data.
|
|
* rs6000-tdep.c (rs6000_gdbarch_init): Figure out whether we have
an e500 executable.
|
|
* mips-tdep.c (DEFAULT_MIPS_TYPE): Delete unused macro.
* config/mips/tm-mips.h (DEFAULT_MIPS_TYPE): Delete unused macro.
* config/mips/tm-embed.h (DEFAULT_MIPS_TYPE): Delete unused macro.
|
|
* mips-tdep.c (MSYMBOL_IS_SPECIAL): Replace macro with function.
(MSYMBOL_SIZE): Replace macro with function.
|
|
static cast from a pointer to a base class to a pointer to a
derived class.
|
|
* infcmd.c (default_print_registers_info): Replace
do_registers_info.
(registers_info): Use gdbarch_print_registers_info instead of
DO_REGISTERS_INFO.
* inferior.h (default_print_registers_info): Replace
do_registers_info.
* gdbarch.sh (PRINT_REGISTERS_INFO): New method.
(DO_REGISTERS_INFO): Change to a predicate function.
* gdbarch.h, gdbarch.c: Regenerate.
2002-08-21 Andrew Cagney <ac131313@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Document
print_registers_info. Note that DO_REGISTERS_INFO is deprecated.
|
|
* gdb-events.c: Regenerated.
* gdb-events.c: Regenerated.
* valops.c (value_assign): Add target-changed event notification
to inlval_register, lval_memory, and lval_reg_frame_relative.
|
|
operation on Alpha Tru64 multi-processor machines.
|
|
* Makefile.in: Update dependencies for mi/ cli/ and tui/
directores.
|
|
* Makefile.in: Update all _h macro definitions.
|
|
* Makefile.in (install-gdbtk): Move to install section.
(rdi-share/libangsd.a): Move to end of file.
|
|
* frame.c (frame_register_unwind): When a register, set addrp to
the register's byte.
|
|
* mips-tdep.c (MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): These are only
used locally, so move them from the target machine header to here.
(mips_set_processor_type, mips_register_name, mips32_next_pc,
mips16_next_pc, cached_proc_desc, mips_set_processor_type):
Make static.
* config/mips/tm-mips.h (MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): Delete.
|
|
* NEWS: Mention that the Apollo line was made obsolete.
* configure.tgt: Make m68*-apollo*-bsd*, m68*-hp-bsd*, and
m68*-hp-hpux* obsolete.
* configure.host: Make m68*-apollo*-sysv*, m68*-apollo*-bsd*,
m68*-hp-bsd* and m68*-hp-hpux* obsolete.
* buildsym.c (make_blockvector): Make static.
* buildsym.h (make_blockvector): Make extern declaration obsolete.
* Makefile.in (HFILES_NO_SRCDIR): Remove dst.h
(ALLDEPFILES): Remove dstread.c.
(dstread.o): Obsolete make rule.
* dstread.c: Makefile obsolete.
* dst.h: Ditto.
* config/m68k/hp300hpux.mt: Ditto.
* config/m68k/hp300hpux.mh: Ditto.
* config/m68k/hp300bsd.mt: Ditto.
* config/m68k/hp300bsd.mh: Ditto.
* config/m68k/apollo68b.mt: Ditto.
* config/m68k/apollo68v.mh: Ditto.
* config/m68k/apollo68b.mh: Ditto.
|
|
* mips-tdep.c (mips_in_return_stub): Make static.
(mips_gdbarch_init): Set in_solib_return_trampoline.
* config/mips/tm-mips.h (IN_SOLIB_RETURN_TRAMPOLINE): Delete.
|
|
* gdbarch.sh (IN_SOLIB_RETURN_TRAMPOLINE): Add.
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c, arch-utils.h (generic_in_solib_return_trampoline):
Add.
* infrun.c (IN_SOLIB_RETURN_TRAMPOLINE): Delete default definition.
|
|
* mips-tdep.c (mips_skip_stub, mips_in_call_stub): Make static.
(mips_gdbarch_init): Set skip_trampoline_code,
in_solib_call_trampoline.
* config/mips/tm-mips.h (REGISTER_NAME): Delete.
(IN_SOLIB_CALL_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Delete.
|
|
* ppc-tdep.h (struct gdbarch_tdep): Add ev registers.
* rs6000-tdep.c (rs6000_register_virtual_type): Return 64 bit
vector type for ev registers.
(e500_pseudo_register_read): New function.
(e500_pseudo_register_write): New function.
(e500_dwarf2_reg_to_regnum): New function.
(PPC_UISA_NOFP_SPRS): New macro.
(PPC_EV_REGS): New macro.
(PPC_GPRS_PSEUDO_REGS): New macro.
(registers_e500): New register set for e500.
(variants): Add e500 variant.
(rs6000_gdbarch_init): Move setting of pc, sp, fp regnums to
before setting architectural dependent variations. Initialize ev
registers numbers. Add case for e500 architecture. Set the
number of pseudo registers.
|
|
* rs6000-tdep.c: Clean up comments.
|
|
* h8300-tdep.c: Re-indent file.
|
|
* config/mips/tm-mips.h (ELF_MAKE_MSYMBOL_SPECIAL): Delete.
(MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): Change into functions.
(FIX_CALL_DUMMY, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME,
POP_FRAME, INIT_EXTRA_FRAME_INFO): Delete.
(CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET,
CALL_DUMMY_ADDRESS): Delete.
* mips-tdep.c (mips_elf_make_msymbol_special, mips_msymbol_size,
mips_msymbol_is_special, mips_fix_call_dummy): New functions.
(mips_gdbarch_init): Set elf_make_msymbol_special, pop_frame,
push_dummy_frame, fix_call_dummy, init_extra_frame_info,
push_return_address.
(mips_register_raw_size, mips_eabi_use_struct_convention,
mips_n32n64_use_struct_convention, mips_o32_use_struct_convention,
mips_o32_reg_struct_has_addr, mips_frame_saved_pc, mips_frame_chain,
mips_init_extra_frame_info, mips_eabi_push_arguments,
mips_n32n64_push_arguments, mips_push_return_address,
mips_push_dummy_frame, mips_pop_frame, mips_skip_prologue,
mips_breakpoint_from_pc, mips_call_dummy_address): Make static.
|
|
default for this.
* gdbserver/Makefile.in (LDFLAGS): Same.
|
|
when setting a watchpoint_scope breakpoint.
|
|
* gdbtypes.c (build_builtin_type_vec64): Add name to type.
(build_builtin_type_vec64i): Ditto.
(build_builtin_type_vec128): Ditto.
(build_builtin_type_vec128i): Ditto.
|
|
* mips-tdep.c (mips_frame_num_args): New function.
(mips_gdbarch_init): Set frame_chain, frameless_function_invocation,
frame_saved_pc, frame_args_address, frame_locals_address,
frame_num_args, and frame_args_skip.
* config/mips/tm-mips.h (FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION,
FRAME_SAVED_PC, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS,
FRAME_NUM_ARGS, FRAME_ARGS_SKIP): Delete.
* config/mips/tm-mipsv4.h (FRAME_CHAIN_VALID): Delete.
|
|
* config/mips/tm-mips.h (STORE_STRUCT_RETURN): Delete.
(EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
* mips-tdep.c (mips_store_struct_return): New function.
(mips_extract_struct_value_address): New function.
(mips_gdbarch_init): Set store_struct_return and
extract_struct_value_address.
|
|
* dwarf2read.c (dwarf2_build_psymtabs): Check that
dwarf_line_offset is nonzero before creating dwarf_line_buffer.
(read_file_scope): Check that line_header is nonzero before
decoding macro information.
|
|
flag the general-purpose registers as floating-point on targets
that don't support the floating-point registers.
|
|
* rs6000-tdep.c (altivec_register_p): Delete.
(rs6000_do_altivec_registers): Delete.
(rs6000_altivec_registers_info): Delete.
(rs6000_do_registers_info): Delete.
(_initialize_rs6000_tdep): Remove command 'info powerpc altivec'.
(rs6000_gdbarch_init): Remove setting of do_registers_info.
|
|
* infcmd.c (do_registers_info): Print vector registers in hex
format only.
(print_vector_info): Check that printing registers
makes sense.
(print_float_info): Ditto.
|
|
* mips-tdep.c (mips_gdbarch_init): Update.
(mips_o32_extract_return_value): Rewrite.
(mips_o32_store_return_value): Rewrite.
(mips_o32_xfer_return_value): New function.
(mips_xfer_register): Tweak debug print message. Allow for
buf_offset when dumping the value transfered.
|
|
* config/mips/tm-nbsd.h (MIPS_DEFAULT_ABI): Delete.
* config/mips/tm-linux.h (MIPS_DEFAULT_ABI): Delete.
* config/mips/tm-irix5.h (MIPS_DEFAULT_ABI): Delete.
* config/mips/tm-irix6.h (MIPS_DEFAULT_ABI): Delete.
* mips-tdep.c (mips_gdbarch_init) [MIPS_DEFAULT_ABI]: Delete code.
|
|
* mips-tdep.c (mips_frame_chain): Check for call-dummy frames.
|
|
* rs6000-tdep.c (struct reg): Add field to indicate a pseudo
register.
(P): New macro to define a register as a pseudo register.
(R, R4, R8, R16, FR32, R64, R0): Updated.
(struct variant): Add new fields for number of pseudo registers
and number of total registers.
(tot_num_registers): New macro replacing....
(num_registers): ...deleted macro.
(num_registers): New function.
(num_pseudo_registers): New function.
(variants): Update all variants to intialize new fields correctly.
Postpone initialization of number of pseudo regs and real regs.
(init_variants): New function.
(rs6000_gdbarch_init): Initialize variants. Update calculation of
registers offsets.
|
|
* valops.c (search_struct_field): Change error message to treat
return value of 0 from value_static_field as meaning that field is
optimized out.
(value_struct_elt_for_reference): Ditto.
* values.c (value_static_field): Treat an unresolved location the
same as a nonexistent symbol. Fix PR gdb/635.
|
|
* gnu-v2-abi.c (gnuv2_value_rtti_type): Eliminate test for being
enclosed. Fix PR gdb/574.
|
|
|
|
* mips-tdep.c (mips_xfer_register): New function.
(mips_n32n64_extract_return_value): Rewrite.
(mips_gdbarch_init): For N32 and N64, set extract_return_value
instead of deprecated_extract_return_value.
|
|
* rs6000-tdep.c (TDEP): Delete macro.
(branch_dest): Replace use of TDEP macro with its body.
(rs6000_pop_frame): Ditto.
(rs6000_push_arguments): Ditto.
(rs6000_skip_trampoline_code): Ditto.
(rs6000_frame_saved_pc): Ditto.
(rs6000_frame_chain): Ditto.
(rs6000_register_name): Ditto.
(rs6000_register_byte): Ditto.
(rs6000_register_raw_size): Ditto.
(rs6000_register_virtual_type): Ditto.
(rs6000_register_convertible): Ditto.
(rs6000_convert_from_func_ptr_addr): Ditto.
|