| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
bfd/
* elfxx-riscv.c (riscv_implicit_subsets): Added implicit f
and zicsr for zfh.
(riscv_supported_std_z_ext): Added default v1.0 version for zfh.
(riscv_multi_subset_supports): Handle INSN_CLASS_ZFH,
INSN_CLASS_D_AND_ZFH and INSN_CLASS_Q_AND_ZFH.
gas/
* config/tc-riscv.c (FLT_CHARS): Added "hH".
(macro): Expand Pseudo M_FLH and M_FSH.
(riscv_pseudo_table): Added .float16 directive.
* testsuite/gas/riscv/float16-be.d: New testcase for .float16.
* testsuite/gas/riscv/float16-le.d: Likewise.
* testsuite/gas/riscv/float16.s: Likewise.
* testsuite/gas/riscv/fp-zfh-insns.d: New testcase for zfh.
* testsuite/gas/riscv/fp-zfh-insns.s: Likewise.
include/
* opcode/riscv-opc.h: Added MASK and MATCH encodings for zfh.
* opcode/riscv.h: Added INSN_CLASS and pseudo macros for zfh.
opcodes/
* riscv-opc.c (riscv_opcodes): Added zfh instructions.
|
|
s390_insert_operand ()'s val, min and max are encoded PCRel32 values
and need to be left-shifted by 1 before being shown to the user.
Left-shifting negative values is undefined behavior in C, but the
current code does not try to prevent it, causing UBSan to complain.
Fix by casting the values to their unsigned equivalents before
shifting.
|
|
The new test failed on s390-linux due to bfd_sprintf_vma trimming
output to 32 bits for 32-bit targets. The test was faulty anyway,
expecting zero as the min end of the range is plainly wrong, but
that's what you get if you cast min to int.
* config/tc-s390.c (s390_insert_operand): Print range error using
PRId64.
* testsuite/gas/s390/zarch-z900-err.l: Correct expected output.
|
|
* config/obj-evax.c (evax_symbol_new_hook): Don't cast to PTR.
|
|
as does not accept instructions like brasl %r0,.-0x100000000, because
of two problems with the generic overflow check:
1. PCRel32 operands are signed, but are treated as unsigned.
2. The allowed range for these operands is [-(1 << 32), (1 << 32) - 1],
and not [-(1 << 31), (1 << 31) - 1].
Fix both by disabling the generic overflow check - it's not needed,
because s390_insert_operand () performs its own.
gas/
* config/tc-s390.c (md_gather_operands): Set fx_no_overflow.
* testsuite/gas/s390/s390.exp: Add zarch-z900-err.
* testsuite/gas/s390/esa-z900.d: New test.
* testsuite/gas/s390/esa-z900.s: New test.
* testsuite/gas/s390/zarch-z900-err.l: New test.
* testsuite/gas/s390/zarch-z900-err.s: New test.
|
|
gas/
* testsuite/gas/i386/i386.exp: Disable rept.
ld/
* testsuite/ld-x86-64/x86-64.exp: Disable pr17618.
|
|
This also was mistakenly flagged as Evex.128.
|
|
* config/obj-coff.h (sy_obj): Don't define.
(OBJ_SYMFIELD_TYPE): Revise comments.
|
|
So far an SAE-only specifier was accepted for static-rounding insns,
while SAE-only insns didn't accept static rounding specifiers. If
anything it would make sense the other way around, allowing SAE-only
insns to have the (ignored) rounding mode specified individually rather
than globally via -mevexrcig=. But for now make things match the SDM.
|
|
This reverts the test committed as part of 6ea673e2d6.
|
|
* as.c (parse_args): Reject unknown -gXXX option.
* testsuite/gas/all/empty.s: New file.
* testsuite/gas/all/pr29067.d: Likewise.
* testsuite/gas/all/pr29067.err: Likewise.
* testsuite/gas/all/gas.exp: Run pr29067.
|
|
The way SAE templates are constructed was always puzzling me (including
the need for separate templates in the first place), and expressing the
extzra attribute via Imm8 actually has a bad effect: Ordinary immediates
would also be accepted, leading to an extra byte being added after the
instruction (i.e. generating bad code). Before re-working this (in
particular to accept proper Intel syntax there), fix the immediate issue
by adding the so far missing check.
|
|
These were mistakenly flagged as Evex.128. Getting the LLIG status right
for insns allowing for SAE is a prereq for planned further work.
|
|
For an unclear reason corresponding AVX512F tests were apparently not
cloned or used as reference here, and instead the bogus legacy forms of
the insns (with the embedded rounding specifier not last) were used.
|
|
It's not just REX.W which is ignored with opcode 0x90. The same goes for
REX.R and REX.X as well as empty REX. None of these are forms of
"xchg %eax,%eax" (which would mean zero-extending %eax to %rax), so they
also shouldn't be disassembled this way.
While there simplify things: A single hook function suffices, thus
making it unnecessary to keep two expressions in sync. And checking
ins->address_mode for mode_64bit also is unnecessary, as "rex" can be
non-zero only in that case anyway.
|
|
Before the change tc-m68k maintained a list of seen labels.
Alignment check traversed label list to resolve symbol to label.
This caused quadratic slowdown as each symbol was checked against
each label. Worst affected files are the ones built with debugging
enabled as DWARF generates many labels.
The change embeds auxiliary label information right into symbol using
TC_SYMFIELD_TYPE.
Before the change test from PR 29058 did not finish in 10 minutes. After
the change it finishes in 2 seconds.
gas/ChangeLog:
PR 29058
* config/tc-m68k.h (TC_SYMFIELD_TYPE): define as m68k_tc_sy.
* config/tc-m68k.c (m68k_frob_label): Use TC_SYMFIELD_TYPE to
store label information.
|
|
With the sole user of the return value gone, convert the return type to
void. This in turn allows simplifying another construct, by moving it
slightly later in the function.
|
|
These were used originally to represent "# <line> <file>" constructs
inserted by (typically) compilers when pre-processing. Quite some time
ago they were replaced by .linefile though. Since the original
directives were never documented, we ought to be able to remove support
for them. As a result in a number of case function parameter aren't used
anymore and can hence be dropped.
|
|
Commit 7992631e8c0b ("gas/Dwarf: improve debug info generation from .irp
and alike blocks"), while dealing okay with actual assembly source files
not using .file/.line and alike outside but not inside of .macro, has
undue effects when the logical file/line pair was already overridden:
Line numbers would continuously increment while processing the expanded
macro, while the goal of the PR gas/16908 workaround is to keep the
expansion associated with the line invoking the macro. However, as soon
as enough state was overridden _inside_ the macro to cause as_where() to
no longer fall back top as_where_physical(), honor this by resuming the
bumping of the logical line number.
Note that from_sb_is_expansion's initializer was 1 for an unknown
reason. While renaming the variable and changing its type, also change
the initializer to "expanding_none", which would have been "0" in the
original code. Originally the initializer value itself wasn't ever used
anyway (requiring sb_index != -1), as it necessarily had changed in
input_scrub_include_sb() alongside setting sb_index to other than -1.
Strictly speaking input_scrub_insert_line() perhaps shouldn't use
expanding_none, yet none of the other enumerators fit there either. And
then strictly speaking that function probably shouldn't exist in the
first place. It's used only by tic54x.
|
|
Commit 7992631e8c0b ("gas/Dwarf: improve debug info generation from .irp
and alike blocks"), while dealing okay with actual assembly source files
not using .file/.line and alike outside but not inside of .irp et al,
has undue effects when the logical file/line pair was already
overridden: Line numbers would continuously increment upon every
iteration, thus potentially getting far off. Furthermore it left it to
the user to actually insert .file/.line inside such constructs. Note
though that before aforementioned change things weren't pretty either:
Diagnostics (and debug info) would be associated with the directive
terminating the iteration construct, rather than with the actual lines.
Handle this automatically by simply latching the present line and then
re-instating coordinates first thing on every iteration; note that the
file can't change from what was previously pushed on the scrubber's
state stack, and hence can be taken from there by using a new flavor of
.linefile (which is far better memory-footprint-wise than recording the
full path in the inserted directive). (This then leaves undisturbed any
file/line control occurring in the body of the construct, as these will
only be seen and processed afterwards.)
|
|
In a few places {disp32} was handled specially when really {disp16}
wants handling just the same.
|
|
As the comment says, hppa doesn't support use of BFD_RELOC_* in
.reloc directives. Using xfail can result in a spurious XPASS result
as BFD_RELOC values change.
* testsuite/gas/elf/pr27228.d: Change xfail to notarget for hppa.
|
|
And disable the new test gas/elf/size.s for alpha which uses its own
.set, for hppa*-*-hpux* which does not allow .size before declaration.
|
|
bfd * coff-i386.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_i386_relocation_section): Add support for R_SECTION.
(coff_i386_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* coff-x86_64.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_amd64_relocation_section): Add support for R_SECTION.
(coff_amd64_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* reloc.c: Add BFD_RELOC_16_SECIDX.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas * config/tc-i386.c (pe_directive_secidx): New function.
(md_pseudo_table): Add support for secidx.
(x86_cons_fix_new): Likewise.
(tc_gen_reloc): Likewise.
* expr.c (op_rank): Add O_secidx.
* expr.h (operatorT): Likewise.
* symbols.c (resolve_symbol_value): Add support for O_secidx.
* testsuite/gas/i386/secidx.s: New test source file.
* testsuite/gas/i386/secidx.d: New test driver file.
* testsuite/gas/i386/i386.exp: Run new test.
include * coff/i386.h: Define R_SECTION.
* coff/x86_64.h: Likewise.
ld * testsuite/ld-pe/secidx1.s: New test source file.
* testsuite/ld-pe/secidx2.s: New test source file.
* testsuite/ld-pe/secidx.d: New test driver file.
* testsuite/ld-pe/secidx_64.d: New test driver file.
* testsuite/ld-pe/pe.exp: Add new tests.
|
|
To help tools like addr2line looking up function names, in particular
when dealing with e.g. PE/COFF binaries (linked from ELF objects), where
there's no ELF symbol table to fall back to, emit minimalistic
information for functions marked as such and having their size
specified.
Notes regarding the restriction to (pure) ELF:
- I realize this is a layering violation; I don't see how to deal with
that in a better way.
- S_GET_SIZE(), when OBJ_MAYBE_ELF is defined, looks wrong: Unlike
S_SET_SIZE() it does not check whether the hook is NULL.
- symbol_get_obj(), when OBJ_MAYBE_ELF is defined, looks unusable, as
its return type can only ever be one object format's type (and this
may then not be ELF's).
The new testcases are limited to x86 because I wanted to include the
case where function size can't be determined yet at the time Dwarf2 info
is generated. As .nops gains support by further targets, they could also
be added here then (with, as necessary, expecations suitably relaxed to
cover for insn size differences).
|
|
Just like insns encoded the more conventional way these should have line
number info associated with them.
|
|
Just like insns encoded the more conventional way these should have line
number info associated with them.
|
|
Since no such test looks to exist, derive one from insn.s.
|
|
So far z16 was identified as arch14. After the machine has been
announced we can now add the real name.
gas/ChangeLog:
* config/tc-s390.c (s390_parse_cpu): Add z16 as alternate CPU
name.
* doc/as.texi: Add z16 and arch14 to CPU string list.
* doc/c-s390.texi: Add z16 to CPU string list.
opcodes/ChangeLog:
* s390-mkopc.c (main): Enable z16 as CPU string in the opcode
table.
|
|
offset entry tables.
PR 28981
* dwarf.c (fetch_indexed_value): Rename to fecth_indexed_addr and
return the address, rather than a string.
(fetch_indexed_value): New function - returns a value indexed by a
DW_FORM_loclistx or DW_FORM_rnglistx form.
(read_and_display_attr_value): Add support for DW_FORM_loclistx
and DW_FORM_rnglistx.
(process_debug_info): Load the loclists and rnglists sections.
(display_loclists_list): Add support for DW_LLE_base_addressx,
DW_LLE_startx_endx, DW_LLE_startx_length and
DW_LLE_default_location.
(display_offset_entry_loclists): New function. Displays a
.debug_loclists section that contains offset entry tables.
(display_debug_loc): Call the new function.
(display_debug_rnglists_list): Add support for
DW_RLE_base_addressx, DW_RLE_startx_endx and DW_RLE_startx_length.
(display_debug_ranges): Display the contents of the section's
header.
* dwarf.h (struct debug_info): Add loclists_base field.
* testsuite/binutils-all/dw5.W: Update expected output.
* testsuite/binutils-all/x86-64/pr26808.dump: Likewise.
|
|
For
```
.size foo1, 1
foo1:
.set bar1, foo1
.size bar1, 2
.size bar2, 2
.set bar2, foo1
.set bar3, foo2
.size bar3, 2
.size bar4, 2
.set bar4, foo2
.size foo2, 1
foo2:
```
bar1's size is 2 while bar2, bar3, bar4's is 1. The behavior of bar1 makes sense
(generally directives on the new symbol should win) and is relied upon by glibc
stdio-common/errlist.c:
```
.hidden _sys_errlist_internal
.globl _sys_errlist_internal
.type _sys_errlist_internal, @object
.size _sys_errlist_internal, 1072
_sys_errlist_internal:
.globl __GLIBC_2_1_sys_errlist
.set __GLIBC_2_1_sys_errlist, _sys_errlist_internal
.type __GLIBC_2_1_sys_errlist, %object
.size __GLIBC_2_1_sys_errlist, 125 * (64 / 8)
// glibc expects that .size __GLIBC_2_1_sys_errlist, 125 * (64 / 8) wins.
```
The behavior of bar2/bar3/bar4 seems brittle. To avoid the reordering of the two
code blocks which will result in the bar3 situation, glibc compiles errlist.c
with gcc -fno-toplevel-reorder (previously -fno-unit-at-a-time).
To fix the inconsistency and improve robustness, make bar2/bar3/bar4 match bar1,
removing the directive order sensitivity.
There is a pity that `.size dest, 0` is indistinguishable from the case where
dest is unset, but the compromise seems fine.
PR gas/29012
* config/obj-elf.c (elf_copy_symbol_attributes): don't copy if src's size
has been set.
* testsuite/gas/elf/elf.exp: New test.
* testsuite/gas/elf/size.d: New file.
* testsuite/gas/elf/size.s: Likewise.
|
|
FEAT_RNG is an optional Armv8.5-A extension, but it can be backported
to earlier architectures as well. GAS previously made the RNG registers
conditional on having both armv8.5-a and +rng, but only +rng should be
required.
This seems to be the only feature that was handled like this.
opcodes/
* aarch64-opc.c (SR_RNG): Don't require V8_5.
gas/
* testsuite/gas/aarch64/rng-1.s, testsuite/gas/aarch64/rng-1.d: New
test.
|
|
Restrict the PR gas/16908 workaround to just macros, matching the
original intention as well as the comment there. For constructs like
.irp or .rept the reasoning doesn't apply, as there's no separate
"invocation" point which may be of interest to record (for, as said
there, short macros).
|
|
While the spec isn't explicit about this, it pointing out the similarity
with the D extension ought to extend to the ignoring of a meaningless
rounding mode: "Note FCVT.D.W[U] always produces an exact result and is
unaffected by rounding mode." Hence the chosen encodings also ought to
match.
Note that to avoid breaking existing code the forms with a 3rd operand
are not removed, which means there continues to be a difference to
FCVT.D.W[U].
|
|
The buffer overflow showed up running the gas "all macro" test.
PR 29005
* config/tc-hppa.c (pa_chk_field_selector): Don't read past end
of line.
|
|
My previous nm patch handled all cases but one -- if the user set NM in
the environment to a path which contained an option, libtool's nm
detection tries to run nm against a copy of nm with the options in it:
e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the
test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle".
This is unlikely to be desirable: in this case we should run
"/usr/bin/nm --blargle /usr/bin/nm".
Furthermore, as part of this nm has to detect when the passed-in $NM
contains a path, and in that case avoid doing a path search itself.
This too was thrown off if an option contained something that looked
like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run
"nm -B../prev-gcc nm" which rarely works well (and indeed it looks
to see whether that nm exists, finds it doesn't, and wrongly concludes
that nm -p or whatever does not work).
Fix all of these by clipping all options (defined as everything
including and after the first " -") before deciding whether nm
contains a path (but not using the clipped value for anything else),
and then removing all options from the path-modified nm before
looking to see whether that nm existed.
NM=my-nm now does a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM=/usr/bin/my-nm now avoids a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM="my-nm -p../wombat" now does a path search and runs e.g.
/usr/bin/my-nm -p../wombat -B /usr/bin/my-nm
NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search:
../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm
This seems to be all combinations, including those used by GCC bootstrap
(which, before this commit, fails to bootstrap when configured
--with-build-config=bootstrap-lto, because the lto plugin is now using
--export-symbols-regex, which requires libtool to find a working nm,
while also using -B../prev-gcc to point at the lto plugin associated
with the GCC just built.)
Regenerate all affected configure scripts.
* libtool.m4 (LT_PATH_NM): Handle user-specified NM with
options, including options containing paths.
|
|
am33_2.0-linux is a mn10300 target.
* testsuite/gas/elf/dwarf-5-irp.d: xfail am33.
|
|
This amends e961c696dcb2 ("x86: drop L1OM/K1OM support from ld"). Also
remove the marker that I mistakenly added in c085ab00c7b2 ("x86: drop
L1OM/K1OM support from gas").
|
|
To prevent fatal or even internal errors, add a simple check to
i386_validate_fix(), rejecting relocations when their target symbol is
an equate of a register (or resolved to reg_section for any other
reason).
|
|
Allow transitive (or recursive) equates to work in addition to direct
ones. The only requirements are that
- the equate being straight of a register, i.e. no expressions involved
(albeit I'm afraid something like "%eax + 0" will be viewed as %eax),
- at the point of use there's no forward ref left which cannot be
resolved, yet.
|
|
This reverts commit 5fac3f02edacfca458f7eeaaaa33a87e26e0e332,
which was superceeded / replaced by 4faaa10f3fab.
|
|
PR gas/28977
Perhaps right from its introduction in 4d1bb7955a8b it was wrong for
i386_parse_name() to call parse_register(). This being a hook from the
expression parser, it shouldn't be resolving e.g. equated symbols.
That's relevant only for all other callers of parse_register().
To compensate, in Intel syntax mode check_register() needs calling;
perhaps not doing so was an oversight right when the function was
introduced. This is necessary in particular to force EVEX encoding when
VRex registers are used (but of course also to reject bad uses of
registers, i.e. fully matching what parse_register() needs it for).
|
|
No need to emit the same string a 2nd time for file 1 in this case.
|
|
First of all when a table entry has a NULL filename, the two inner if()s
are better done the other way around: The 2nd doesn't depend on what the
first does. This then renders redundant half of the conditions of the
other if() and clarifies that subsequently only entry 0 is dealt with
(indicating that part of the comment was wrong). Finally for there to be
a usable name in slot 1, files_in_use needs to be larger than 1 and slot
1's (rather than slot 0's) name needs to be non-NULL.
|
|
Commit 3417bfca676f ("GAS: DWARF-5: Ensure that the 0'th entry in the
directory table contains the current... ") added a "dwarf_level < 5"
check to out_dir_and_file_list(). This rendered dead that branch of the
construct, due to the enclosing if()'s "DWARF2_LINE_VERSION >= 5".
Delete that code as well as the corresponding part of the comment.
While there also drop a redundant "dirs != NULL": "dirs" will always be
non-NULL when dirs_in_use is not zero.
|
|
Tying the bumping of the logical line number to reading from the
original source file looks wrong: Upon finishing of the processing of an
sb the original values will be restored anyway. Yet without bumping the
line counter uses of .line inside e.g. an .irp construct won't have the
intended effect: Such uses may be necessary to ensure proper debug info
is emitted in particular when switching sections inside the .irp body,
as dwarf2_gen_line_info() would bail without doing anything when it
finds the line number unchanged from what it saw last.
|
|
At least x86-64's x32 sub-mode and RISC-V's 32-bit mode calculate
addends as 64-bit values, but store them in signed 32-bit fields when
generating the file without encountering any earlier error. When the
relocated field is a 64-bit one, the value resulting after processing
the relocation record when linking (or the latest when loading) may
thus be wrong due to the truncation.
With the code change in place, one x32 testcase actually triggers the
new diagnostic. That one case of too large a (negative) addend is being
adjusted alongside the addition of a new testcase to actually trigger
the new error. (Note that due to internal BFD behavior the relocation in
.data doesn't get processed anymore after the errors in .text.)
Note that in principle it is possible to express 64-bit relocations in
ELF32, but this would require .rel relocations, i.e. with the addend
stored in the 64-bit field being relocated. But I guess it would be a
lot of effort for little gain to actually support this.
|
|
Macro arguments may be separated by commas or just whitespace. Macro
arguments may also be quoted (where one level of quotes is removed in
the course of determining the values for the respective formal
parameters). Furthermore this quote removal knows _two_ somewhat odd
escaping mechanisms: One, apparently in existence forever, is that a
pair of quotes counts as the escaping of a quote, with the pair being
transformed to a single quote in the course of quote removal. The other
(introduced by c06ae4f232e6) looks more usual on the surface in that it
deals with \" sequences, but it _retains_ the escaping \. Hence only the
former mechanism is suitable when the value to be used by the macro body
is to contain a quote. Yet this results in ambiguity of what "a""b" is
intended to mean; elsewhere (e.g. for .ascii) it represents two
successive string literals. However, in any event is the above different
from "a" "b": I don't think this can be viewed the same as "a""b" when
processing macro arguments.
Change the scrubber to retain such whitespace, by making the processing
of strings more similar to that of symbols. And indeed this appears to
make sense when taking into account that for quite a while gas has been
supporting quoted symbol names.
Taking a more general view, however, the change doesn't go quite far
enough. There are further cases where significant whitespace is removed
by the scrubber. The new testcase enumerates a few in its ".if 0"
section. I'm afraid the only way that I see to deal with this would be
to significantly simplify the scrubber, such that it wouldn't do much
more than collapse sequences of unquoted whitespace into a single blank.
To be honest problems in this area aren't really surprising when seeing
that there's hardly any checking of .macro use throughout the testsuite
(and in particular in the [relatively] generic tests under all/).
|
|
Unlike in 64-bit mode, where values wrap at the 64-bit boundary anyway,
there's no wrapping at the 32-bit boundary here, and hence overflow
detection shouldn't be suppressed just because rela relocations are
going to be used.
The extra check against NO_RELOC is actually a result of an ilp32 test
otherwise failing. But thinking about it, reporting overflows for
not-really-relocations (typically because of earlier errors) makes
little sense in general. Perhaps this should even be extended to non-
64-bit modes.
|
|
PR 28791
* config/tc-z80.c (emit_data_val): Do not warn about overlarge
constants generated by bit manipulation operators.
* testsuite/gas/z80/pr28791.s: New test source file.
* testsuite/gas/z80/pr28791.d: New test driver file.
|
