aboutsummaryrefslogtreecommitdiff
path: root/gas
AgeCommit message (Collapse)AuthorFilesLines
2017-03-02Add generated filesbinutils-2_28Tristan Gingold26-10/+59019
2017-03-01Nios2 dynobj handling fixesAlan Modra2-0/+12
A number of places in elf32-nios.c created dynamic sections but didn't set the hash table dynobj. That meant we could have duplicate dynamic sections connected to a number of bfds, so size_dynamic_sections didn't properly discard or allocate contents. Also, the entire set of dynamic sections was created in check_relocs on seeing GOT relocs, when only .got related sections are needed, probably done to hide segfaults later in finish_dynamic_sections. The patch fixes these issues and makes the assembler emit errors when nios2 lacks the necessary pc-relative relocs for subtraction expressions, rather than silently generating bad code. eg. ld-elf/merge. I've also tidied uses of elf32_nios2_hash_table and elf_hash_table. bfd/ PR 20995 * elf32-nios2.c (nios2_elf32_relocate_section): Use htab rather than elf32_nios2_hash_table or elf_hash_table. (create_got_section): Likewise. (nios2_elf32_finish_dynamic_symbol): Likewise. (nios2_elf32_adjust_dynamic_symbol): Likewise. (nios2_elf32_size_dynamic_sections): Likewise. (nios2_elf32_check_relocs): Delete dynobj, sgot, and srelgot vars. Use htab equivalents directly instead. Don't create all dynamic sections on needing just the GOT. Use a goto rather than a fall-through with reloc test. Ensure htab->dynobj is set when making dynamic sreloc section. (nios2_elf32_finish_dynamic_sections): Delete dynobj, use htab equivalent directly instead. Don't segfault on looking for .dynamic when dynamic sections have not been created. Don't segfault on .got.plt being discarded. (nios2_elf32_size_dynamic_sections): Delete plt and got vars. Don't set "relocs" on .rela.plt. Do handle .sbss. Delete fixme and another not so relevant comment. (nios2_elf_add_symbol_hook): Delete dynobj var. If not already set, set hash table dynobj on creating .sbss. gas/ * config/tc-nios2.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define. ld/ * testsuite/ld-elf/merge.d: xfail for nios.
2017-02-28PowerPC addpcis fixAlan Modra3-81/+71
This came up because I was looking at ld/tmpdir/addpcis.o and noticed the odd addends on REL16DX_HA. They ought to both be -4. The error crept in due REL16DX_HA howto being pc-relative (as indeed it should be), and code at gas/write.c:1001 after this comment /* Make it pc-relative. If the back-end code has not selected a pc-relative reloc, cancel the adjustment we do later on all pc-relative relocs. */ *not* cancelling the pc-relative adjustment. So I've made a dummy non-relative split reloc so that the generic code handles this, rather than attempting to add hacks later in md_apply_fix which would not be very robust. Having the new internal reloc also makes it easy to support addpcis rx,sym@ha as an equivalent to addpcis rx,(sym-0f)@ha 0: The patch also fixes overflow checking, which must test whether the addi will overflow too since @l relocs don't have any overflow check. Lastly, since I was poking at md_apply_fix, I arranged to have the generic gas/write.c code emit errors for subtraction expressions where we lack reloc support. include/ * elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment. * elf/ppc.h (R_PPC_16DX_HA): Likewise. bfd/ * reloc.c (BFD_RELOC_PPC_16DX_HA): New. * elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto. (ppc64_elf_reloc_type_lookup): Translate new bfd reloc. (ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA. (ppc64_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto. (ppc_elf_reloc_type_lookup): Translate new bfd reloc. (ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. gas/ * config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis. (md_apply_fix): Remove fx_subsy check. Move code converting to pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code emiiting errors on seeing fx_pcrel set on unexpected relocs, as that is done now by the generic code via.. * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define. (TC_VALIDATE_FIX_SUB): Define. ld/ * testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at limits of addpcis range.
2017-02-27 sveRichard Sandiford7-8/+5081
[AArch64] Additional SVE instructions This patch supports some additions to the SVE architecture prior to its public release. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4x16) (AARCH64_OPND_SVE_IMM_ROT1, AARCH64_OPND_SVE_IMM_ROT2) (AARCH64_OPND_SVE_Zm3_INDEX, AARCH64_OPND_SVE_Zm3_22_INDEX) (AARCH64_OPND_SVE_Zm4_INDEX): New aarch64_opnds. opcodes/ * aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD) (OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD) (OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S) (OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H) (OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH) (OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD) (OP_SVE_V_HSD): New macros. (OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD) (OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD) (OP_SVE_VZV_SD, OP_SVE_V_SD): Delete. (aarch64_opcode_table): Add new SVE instructions. (aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate for rotation operands. Add new SVE operands. * aarch64-asm.h (ins_sve_addr_ri_s4): New inserter. (ins_sve_quad_index): Likewise. (ins_imm_rotate): Split into... (ins_imm_rotate1, ins_imm_rotate2): ...these two inserters. * aarch64-asm.c (aarch64_ins_imm_rotate): Split into... (aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two functions. (aarch64_ins_sve_addr_ri_s4): New function. (aarch64_ins_sve_quad_index): Likewise. (do_misc_encoding): Handle "MOV Zn.Q, Qm". * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_addr_ri_s4): New extractor. (ext_sve_quad_index): Likewise. (ext_imm_rotate): Split into... (ext_imm_rotate1, ext_imm_rotate2): ...these two extractors. * aarch64-dis.c (aarch64_ext_imm_rotate): Split into... (aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two functions. (aarch64_ext_sve_addr_ri_s4): New function. (aarch64_ext_sve_quad_index): Likewise. (aarch64_ext_sve_index): Allow quad indices. (do_misc_decoding): Likewise. * aarch64-dis-2.c: Regenerate. * aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New aarch64_field_kinds. (OPD_F_OD_MASK): Widen by one bit. (OPD_F_NO_ZR): Bump accordingly. (get_operand_field_width): New function. * aarch64-opc.c (fields): Add new SVE fields. (operand_general_constraint_met_p): Handle new SVE operands. (aarch64_print_operand): Likewise. * aarch64-opc-2.c: Regenerate. gas/ * doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum. * config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q to be used with SVE registers. (parse_operands): Handle new SVE operands. (aarch64_features): Make "sve" require F16 rather than FP. Also require COMPNUM. * testsuite/gas/aarch64/sve.s: Add tests for new instructions. Include compnum tests. * testsuite/gas/aarch64/sve.d: Update accordingly. * testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions. * testsuite/gas/aarch64/sve-invalid.l: Update accordingly. Also update expected output for new FMOV and MOV alternatives.
2017-02-27 sveRichard Sandiford5-0/+62
[AArch64] Add a "compnum" feature This patch adds a named "compnum" feature for the ARMv8.3-A FCADD and FCMLA extensions. include/ * opcode/aarch64.h (AARCH64_FEATURE_COMPNUM): New macro. (AARCH64_ARCH_V8_3): Include AARCH64_FEATURE_COMPNUM. opcodes/ * aarch64-tbl.h (aarch64_feature_simd_v8_3): Replace with... (aarch64_feature_compnum): ...this. (SIMD_V8_3): Replace with... (COMPNUM): ...this. (CNUM_INSN): New macro. (aarch64_opcode_table): Use it for the complex number instructions. gas/ * doc/c-aarch64.texi: Add a "compnum" entry. * config/tc-aarch64.c (aarch64_features): Likewise, * testsuite/gas/aarch64/advsimd-compnum.s: New test. * testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
2017-02-27 sveRichard Sandiford5-0/+85
[AArch64] Add SVE system registers This patch adds the SVE-specific system registers. opcodes/ * aarch64-opc.c (aarch64_sys_regs): Add SVE registers. (aarch64_sys_reg_supported_p): Handle them. gas/ * testsuite/gas/aarch64/sve-sysreg.s, testsuite/gas/aarch64/sve-sysreg.d, testsuite/gas/aarch64/sve-sysreg-invalid.d, testsuite/gas/aarch64/sve-sysreg-invalid.l: New tests.
2017-02-27 sveRichard Sandiford2-2/+6
[AArch64] Fix +sve documentation The documentation entry for the SVE feature incorrectly said that it was enabled by default for ARMv8-A or later. This patch fixes that and also mentions that +sve implies +simd. (It also implies +fp, but that follows by transitivity.) gas/ * doc/c-aarch64.texi: Fix sve entry.
2017-02-27[AArch64] Add separate feature flag for weaker release consistent load insnsRichard Sandiford5-0/+33
The weaker release consistency support of ARMv8.3-A is allowed as an optional extension for ARMv8.2-A, so separate command line option and feature flag is added: -march=armv8.2-a+rcpc turns LDAPR, LDAPRB, LDAPRH instructions on. opcodes/ 2017-01-04 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (RCPC, RCPC_INSN): Define. (aarch64_opcode_table): Use RCPC_INSN. include/ 2017-01-04 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_RCPC): Define. (AARCH64_ARCH_V8_3): Update. gas/ 2017-01-04 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (aarch64_features): Add rcpc. * doc/c-aarch64.texi (AArch64 Extensions): Document rcpc. * testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Rename to ... * testsuite/gas/aarch64/ldst-rcpc.d: This. * testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Rename to ... * testsuite/gas/aarch64/ldst-rcpc.s: This. * testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: New test.
2017-02-23S/390: Add support for new cpu architecture - arch12.Andreas Krebbel7-12/+411
This adds support of new instructions to the S/390 specific parts. The important feature of the new instruction set is the support of single and extended precision floating point vector operations. Note: arch12 is NOT the official name of the new CPU. It just continues the series of archXX options supported as alternate names. The archXX terminology refers to the edition number of the Principle of Operations manual. The official CPU name will be added later while keeping support of the arch12 for backwards compatibility. No testsuite regressions. Committed to mainline. Bye, -Andreas- opcodes/ChangeLog: 2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * s390-mkopc.c (main): Accept arch12 as cpu string and vx2 as facility. * s390-opc.c: Add new operand description macros, new instruction types, instruction masks, and new .insn instruction types. * s390-opc.txt: Add new arch12 instructions. include/ChangeLog: 2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * opcode/s390.h (enum s390_opcode_cpu_val): New value S390_OPCODE_ARCH12. (S390_INSTR_FLAG_VX2): New macro definition. gas/ChangeLog: 2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (s390_parse_cpu): New entry for arch12. * doc/as.texinfo: Document arch12 as cpu type. * doc/c-s390.texi: Likewise. * testsuite/gas/s390/s390.exp: Run arch12 specific tests. * testsuite/gas/s390/zarch-arch12.d: New test. * testsuite/gas/s390/zarch-arch12.s: New test. * testsuite/gas/s390/zarch-z13.d: Rename some mnemonics in the output patterns.
2017-02-14Fix powerpc testsuite source errorsAlan Modra4-22/+28
PR 21118 work exposed these errors in the testsuite. * testsuite/gas/ppc/cell.s: Correct invalid registers. * testsuite/gas/ppc/vle-simple-1.s: Likewise. * testsuite/gas/ppc/vle-simple-2.s: Likewise.
2017-02-11POWER9 add scv/rfscv instruction supportNicholas Piggin3-0/+10
opcodes/ * ppc-opc.c (powerpc_opcodes) <scv, rfscv>: New mnemonics. gas/ * testsuite/gas/ppc/power9.d <scv, rfscv>: New tests.
2017-02-01RISC-V gas: Remove em=linux from configure.tgtSebastian Huber2-1/+5
The use of te-linux.h is unnecessary since the TE_LINUX define is unused and LOCAL_LABELS_FB is defined to 1 in tc-riscv.h as well. gas/ * configure.tgt (riscv*-*-*): Remove em=linux.
2017-01-30MIPS: Add options to control branch ISA checksMaciej W. Rozycki11-0/+267
Complement commit 9d862524f6ae ("MIPS: Verify the ISA mode and alignment of branch and jump targets") and add GAS and LD options to control the checks for invalid branches between ISA modes introduced there, to help with some handwritten code lacking `.insn' annotation for labels used as branch targets and code produced by older versions of GCC which suffers from the issue with branches to code that has been optimized away, addressed with GCC commit 242424 ("MIPS/GCC: Mark trailing labels with `.insn'"), <https://gcc.gnu.org/ml/gcc-patches/2016-11/msg01061.html>. bfd/ * elfxx-mips.h (_bfd_mips_elf_insn32): Rename prototype to... (_bfd_mips_elf_linker_flags): ... this. Add another parameter. * elfxx-mips.c (mips_elf_link_hash_table): Add `ignore_branch_isa' member. (mips_elf_perform_relocation): Do not treat an ISA mode mismatch in branch relocation calculation as an error if `ignore_branch_isa' has been set. (_bfd_mips_elf_insn32): Rename to... (_bfd_mips_elf_linker_flags): ... this. Rename the `on' parameter to `insn32' and add an `ignore_branch_isa' parameter. Handle the new parameter. gas/ * config/tc-mips.c (mips_ignore_branch_isa): New variable. (options): Add OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA enum values. (md_longopts): Add "mignore-branch-isa" and "mno-ignore-branch-isa" options. (md_parse_option): Handle OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA. (fix_bad_cross_mode_branch_p): Return FALSE if `mips_ignore_branch_isa' has been set. (md_show_usage): Add `-mignore-branch-isa' and `-mno-ignore-branch-isa'. * doc/as.texinfo (Target MIPS options): Add `-mignore-branch-isa' and `-mno-ignore-branch-isa' options. (-mignore-branch-isa, -mno-ignore-branch-isa): New options. * doc/c-mips.texi (MIPS Options): Add `-mignore-branch-isa' and `-mno-ignore-branch-isa' options. * testsuite/gas/mips/branch-local-ignore-2.d: New test. * testsuite/gas/mips/branch-local-ignore-3.d: New test. * testsuite/gas/mips/branch-local-ignore-n32-2.d: New test. * testsuite/gas/mips/branch-local-ignore-n32-3.d: New test. * testsuite/gas/mips/branch-local-ignore-n64-2.d: New test. * testsuite/gas/mips/branch-local-ignore-n64-3.d: New test. * testsuite/gas/mips/mips.exp: Run the new tests. ld/ * emultempl/mipself.em (ignore_branch_isa): New variable. (mips_create_output_section_statements): Rename `_bfd_mips_elf_insn32' called to `_bfd_mips_elf_linker_flags', add `ignore_branch_isa' argument. (PARSE_AND_LIST_PROLOGUE): Add OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA enum values. (PARSE_AND_LIST_LONGOPTS): Add "ignore-branch-isa" and "no-ignore-branch-isa" options. (PARSE_AND_LIST_OPTIONS): Add `--ignore-branch-isa' and `--no-ignore-branch-isa'. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA. * ld.texinfo (Options specific to MIPS targets): Add `--ignore-branch-isa' and `--no-ignore-branch-isa' options. (ld and the MIPS family): Likewise. * testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: New test. * testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: New test. * testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-mips16: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-micromips: New test. * testsuite/ld-mips-elf/mips-elf.exp: Run the new tests. (cherry picked from commit 8b10b0b3e100c25322a083248c7a18bf5a1f3527)
2017-01-30MIPS/GAS/testsuite: Convert branch local list tests to dump testsMaciej W. Rozycki8-12/+35
gas/ * testsuite/gas/mips/branch-local-2.d: New test. * testsuite/gas/mips/branch-local-3.d: New test. * testsuite/gas/mips/branch-local-n32-2.d: New test. * testsuite/gas/mips/branch-local-n32-3.d: New test. * testsuite/gas/mips/branch-local-n64-2.d: New test. * testsuite/gas/mips/branch-local-n64-3.d: New test. * testsuite/gas/mips/mips.exp: Fold corresponding list tests into the new tests. (cherry picked from commit 7795a8f8bdde2fa5c0e0639b92280314b32ec78d)
2017-01-18PR gas/20649: MIPS: Fix GOT16/LO16 reloc pairing with comdat sectionsMaciej W. Rozycki5-5/+89
Correct a regression from commit 8614eeee67f9 ("Traditional MIPS patches"), <https://sourceware.org/ml/binutils/2000-07/msg00018.html>, which caused symbols in linkonce or what is these days known as comdat sections to be treated as external for the purpose of PIC relocation generation even if their binding remains STB_LOCAL. This in turn disabled GOT16/LO16 relocation pairing with references to such symbols, as no complementing LO16 relocation is expected for external GOT16 references in the o32 ABI, which ultimately leads to link errors, e.g.: ld: comdat-reloc.o: Can't find matching LO16 reloc against `foo' for R_MIPS_GOT16 at 0x24 in section `.text.bar[bar]' as with the LD test case included with this change. Revert the special case for symbols in comdat sections then, making code actually match `adjust_reloc_syms' as indicated in its explanatory comment, and adjust calling code accordingly. Also bring back the corresponding description of what now is `s_is_linkonce', lost with commit 5f0fe04bc550 ("Improved MIPS16/MIPS32 code intermixing for gas."), <https://www.sourceware.org/ml/binutils/2006-07/msg00039.html>. gas/ PR gas/20649 * config/tc-mips.c (pic_need_relax): Don't check for linkonce symbols, remove the `segtype' parameter. (mips_frob_file, md_estimate_size_before_relax): Adjust accordingly. (s_is_linkonce): Add an explanatory comment. * testsuite/gas/mips/comdat-reloc.d: New test. * testsuite/gas/mips/comdat-reloc.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test. ld/ PR gas/20649 * testsuite/ld-mips-elf/mips-elf.exp: Add PIC comdat GOT16/LO16 relocation pairing link test. (cherry picked from commit 9e009953a54bfbf79d83f37797f846c923aeea43)
2017-01-18Fix lex source files so that they will be accepted by flex v2.6.3Bernhard Rosenkranzer3-17/+10
PR 21059 binutils* config/bfin-lex.l: Support processing with flex 2.6.3. * itbl-lex.l: Likewise. gas * arlex.l: Support processing with flex 2.6.3. * deflex.l: Likewise. * syslex.l: Likewise. ld * ldlex.l: Support processing with flex 2.6.3.
2017-01-16RISC-V/GAS: Support more relocs against constant addressesAndrew Waterman2-3/+8
Previously, some pseudoinstructions like "call" only accepted symbolic addresses and rejected constant addresses with an esoteric internal error. This patch enables them by deferring application of constant relocations to md_apply_fix, rather than eagerly applying them during instruction assembly. gas/ChangeLog 2017-01-09 Andrew Waterman <andrew@sifive.com> * config/tc-riscv.c (append_insn): Don't eagerly apply relocations against constants. (md_apply_fix): Mark relocations against constants as "done."
2017-01-16RISC-V/GAS: Improve handling of invalid relocsAndrew Waterman2-1/+15
TLS relocs against constants previously segfaulted, and illegal symbol subtractions were silently ignored. The previous behavior was to segfault. gas/ChangeLog 2017-01-09 Andrew Waterman <andrew@sifive.com> * config/tc-riscv.c (md_apply_fix): Report TLS relocations against constants. Report disallowed symbol subtractions.
2017-01-16Remove some custom sections from RISC-V's default linker scriptsPalmer Dabbelt1-0/+7
This was added so compressed loads could have smaller offsets for accessing the data section, but the result was that writable sections ended up in INITIAL_READONLY_SECTIONS. This is a bad idea. The fix is to just remove this micro-optimization. Thanks to Alan Morda for finding the problem! ld/ChangeLog 2017-01-09 Palmer Dabbelt <palmer@dabbelt.com> Kito Cheng <kito.cheng@gmail.com> * emulparams/elf32lriscv-defs.sh (INITIAL_READONLY_SECTIONS): Removed. (SDATA_START_SYMBOLS): Likewise.
2017-01-16RISC-V/GAS: Correct branch relaxation for weak symbols.Andrew Waterman2-0/+35
gas/ChangeLog 2017-01-09 Andrew Waterman <andrew@sifive.com> * config/tc-riscv.c (relaxed_branch_length): Use the long sequence when the target is a weak symbol.
2017-01-13Enable Intel AVX512_VPOPCNTDQ instructionsIgor Tsimbalist10-1/+421
gas/ 2017-01-12 Igor Tsimbalist <igor.v.tsimbalist@intel.com> * config/tc-i386.c (cpu_arch): Add .avx512_vpopcntdq. (cpu_noarch): Add noavx512_vpopcntdq. * doc/c-i386.texi: Document avx512_vpopcntdq, noavx512_vpopcntdq. * testsuite/gas/i386/i386.exp: Run AVX512_VPOPCNTDQ tests. * testsuite/gas/i386/avx512_vpopcntdqd-intel.d: New file. * testsuite/gas/i386/avx512_vpopcntdqd.d: Ditto. * testsuite/gas/i386/avx512_vpopcntdqd.s: Ditto. * testsuite/gas/i386/x86-64-avx512_vpopcntdqd-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_vpopcntdqd.d: Ditto. * testsuite/gas/i386/x86-64-avx512_vpopcntdqd.s: Ditto. opcodes/ 2017-01-12 Igor Tsimbalist <igor.v.tsimbalist@intel.com> * i386-dis.c (enum): Add PREFIX_EVEX_0F3855, EVEX_W_0F3855_P_2. * i386-dis-evex.h (evex_table): Updated. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_VPOPCNTDQ_FLAGS, CPU_ANY_AVX512_VPOPCNTDQ_FLAGS. Update CPU_ANY_AVX512F_FLAGS. (cpu_flags): Add CpuAVX512_VPOPCNTDQ. * i386-opc.h (enum): (AVX512_VPOPCNTDQ): New. (i386_cpu_flags): Add cpuavx512_vpopcntdq. * i386-opc.tbl: Add Intel AVX512_VPOPCNTDQ instructions. * i386-init.h: Regenerate. * i386-tbl.h: Ditto.
2017-01-02Update year range in copyright notice of all files.Alan Modra556-558/+562
2017-01-02ChangeLog rotationAlan Modra2-5974/+5988
2016-12-23MIPS16: Add ASMACRO instruction supportMaciej W. Rozycki6-0/+79
Add ASMACRO instruction support as per the MIPS16e ASE architecture specifications [1][2], completing MIPS16e instruction set support. [1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65 [2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66 include/ * opcode/mips.h: Document `0', `1', `2', `3', `4' and `s' operand codes. opcodes/ * mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3', `4' and `s' operand codes. (mips16_opcodes): Add "asmacro" entry. binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: Update for ASMACRO support. gas/ * testsuite/gas/mips/mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-asmacro.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. (cherry picked from commit 5284e471d53ccb7c7a1d140bd83098607ccf4b8a)
2016-12-23MIPS16: Simplify extended operand handlingMaciej W. Rozycki2-1/+6
Simplify extended operand handling and only specially process immediates which require bit shuffling, using the generic operand insertion and extraction handlers for the '<' (5-bit shift amount) operand code in particular. Require the least significant bit of all extended operand forms to be (artificially) set to 0 for their special processing to trigger. gas/ * config/tc-mips.c (mips16_immed): Limit `mips16_immed_extend' use to operands whose LSB position is zero. opcodes/ * mips-dis.c (print_mips16_insn_arg): Simplify processing of extended operands. * mips16-opc.c (decode_mips16_operand): Switch the extended form of the `<' operand type to LSB position 22. (cherry picked from commit bdd152861ce75c36828904cf3d10f8ce14da6cf5)
2016-12-23MIPS16/GAS: Clean up invalid unextended operand handlingMaciej W. Rozycki9-2/+245
Bail out right away when an unextended instruction encoding is required either with the use of a `.t' suffix or by means of `.set noautoextend', however an operand supplied requires the extended instruction form to be used. This is to avoid messing up with the internal state of the assembler, even though no actual failures are known to happen as a result. Add test cases for the situation concerned. gas/ * config/tc-mips.c (match_mips16_insn): Don't update `forced_insn_length' or the instruction opcode if an operand requires an extended instruction form, but an unextended one has been requested. * testsuite/gas/mips/mips16-relax-unextended-1.d: New test. * testsuite/gas/mips/mips16-relax-unextended-2.d: New test. * testsuite/gas/mips/mips16-relax-unextended-1.l: New stderr output. * testsuite/gas/mips/mips16-relax-unextended-2.l: New stderr output. * testsuite/gas/mips/mips16-relax-unextended-1.s: New test source. * testsuite/gas/mips/mips16-relax-unextended-2.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. (cherry picked from commit 1da43accb4f8e2a19dc033b617982e3c2dc83a08)
2016-12-23MIPS16: Reassign `0' and `4' operand codesMaciej W. Rozycki2-5/+11
Replace `0' and `4' operand codes with `.' and `F' respectively to free up the `0'-`4' consecutive range. No functional change. gas/ * config/tc-mips.c (mips16_macro_build): Replace `0' and `4' operand codes with `.' and `F' respectively. (mips16_macro): Likewise. include/ * opcode/mips.h: Replace `0' and `4' operand codes with `.' and `F' respectively. opcodes/ * mips16-opc.c (decode_mips16_operand): Replace `0' and `4' operand codes with `.' and `F' respectively. (mips16_opcodes): Likewise. (cherry picked from commit d8722d7641d234dcd3d1f2254fbc5d9cf234e4e6)
2016-12-23MIPS16: Handle non-extensible instructions correctlyMaciej W. Rozycki25-43/+1135
Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests. (cherry picked from commit 0674ee5dada21c8deec690ca66d5b2870f13ea49)
2016-12-23MIPS16: Remove "extended" BREAK/SDBBP handlingMaciej W. Rozycki2-8/+6
Remove special casing for the `6' operand code used for the embedded trap code of the BREAK and the SDBBP instructions to support supposedly extended forms of these instructions. According to all versions of the MIPS16 ASE specifications these instructions are not extensible [1][2][3][4][5][7][8][10][11], and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [5][6][9][10]. Therefore supposedly extended BREAK and SDBBP instructions do not serve their purpose anymore as they do not cause a Bp and a Debug exception respectively and supporting these forms in disassembly only causes confusion. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] same, Table 18. "Extendable MIPS16 Instructions", p. 24 [4] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Table 3.8 "MIPS16e Special Instructions", p. 38 [5] same, Section 3.11 "MIPS16e Extensible Instructions, p. 41 [6] same, Table 3.15 "MIPS16e Extensible Instructions", p. 41 [7] same, Table 3.24 "MIPS16e RR Encoding of the Funct Field", p. 49 [8] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Table 1.8 "MIPS16e Special Instructions", p. 39 [9] same, Section 1.11 "MIPS16e Extensible Instructions", p. 42 [10] same, Table 1.15 "MIPS16e Extensible Instructions", pp. 42-43 [11] same, Table 1.24 "MIPS16e RR Encoding of the Funct Field", p. 50 gas/ * config/tc-mips.c (match_mips16_insn): Remove the `6' operand code special case and its associated comment. opcodes/ * mips16-opc.c (decode_mips16_operand) <'6'>: Remove extended encoding support. (cherry picked from commit b2805ed55456cea2694d31fc8627cca17120267b)
2016-12-23MIPS16/GAS: Fix forced size suffixes with argumentless instructionsMaciej W. Rozycki5-10/+51
Correct the handling of `.e' and `.t' instruction size suffixes with instruction mnemonics which are not followed by any text on the same line, such as arguments or white space, e.g.: $ cat test.s .set mips16 foo: entry.t # comment entry.t exit.t # comment exit.t nop.t # comment nop.t $ as -32 -o test.o test.s test.s: Assembler messages: test.s:4: Error: unrecognized opcode `entry.t' test.s:6: Error: unrecognized opcode `exit.t' test.s:8: Error: unrecognized opcode `nop.t' $ gas/ * config/tc-mips.c (mips16_ip): Handle `.e' and `.t' instruction suffixes followed by a null character rather than a space too. * testsuite/gas/mips/mips16-insn-length-noargs.d: New test. * testsuite/gas/mips/mips16-insn-length-noargs.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test. (cherry picked from commit 3fb49709438e204177373646585a76116caf23fb)
2016-12-23MIPS16/GAS: Disallow EXTEND delay-slot schedulingMaciej W. Rozycki4-0/+55
Do not allow any explicitly coded EXTEND instruction to be automatically scheduled into a jump delay slot, as an EXTEND prefix is coupled with the next regular MIPS16 instruction and therefore swapping it with a jump would change program's semantics; EXTEND is not architecturally allowed to be present in a jump delay slot anyway. opcodes/ * mips16-opc.c (mips16_opcodes): Set NODS in `pinfo' for "extend". gas/ * testsuite/gas/mips/mips16-extend-swap.d: New test. * testsuite/gas/mips/mips16-extend-swap.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test. (cherry picked from commit 645c455650ed35460afdacb078c7c58308607fbe)
2016-12-23Bumping version to 2.27.90Tristan Gingold2-10/+14
bfd/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * version.m4: Bump version to 2.27.90 * configure: Regenerate. binutils/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. gas/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. gprof/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. ld/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. opcodes/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate.
2016-12-23Add marker in NEWS filesTristan Gingold2-0/+6
binutils/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. gas/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. ld/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28.
2016-12-23Regenerate pot files.Tristan Gingold2-3992/+4933
2016-12-22ChangeLog formatting fixesAlan Modra1-2/+2
2016-12-22Support aligning text section from odd addressesAndrew Waterman2-6/+21
Previously, the alignment directives were not correctly supported in the text section when current alignment was only 1 byte (i.e., when the address was odd). Since there are no 1-byte instructions in RISC-V, this patch resolves the bug by writing a zero byte to obtain 2-byte alignment, at which point a 2-byte NOP can be used to obtain 4-byte alignment. Resolves https://github.com/riscv/riscv-gnu-toolchain/issues/205 * config/tc-riscv.c (riscv_make_nops): Emit 2-byte NOPs. (riscv_frag_align_code): Correct frag_align_code arg.
2016-12-22Fix a const-safety issue on GCC-4.9 and aboveTim Newsome2-1/+6
* config/tc-riscv.c (riscv_pre_output_hook): Remove const from loc4_frag.
2016-12-21Remove high bit set charactersAlan Modra3-6/+11
gas/ * doc/c-lm32.texi: Fix chars with high bit set. * testsuite/gas/bfin/vector2.s: Likewise. gold/ * arm.cc: Fix comment chars with high bit set. include/ * coff/pe.h: Fix comment chars with high bit set. * opcode/xgate.h: Likewise. ld/ * testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
2016-12-21Document character escape sequencesAlan Modra2-6/+12
PR gas/10946 * doc/as.texinfo (Chars): Document escape sequences.
2016-12-20MIPS16/opcodes: Respect ISA and ASE in disassemblyMaciej W. Rozycki15-0/+1681
Limit MIPS16 instruction disassembly according to the ISA level and ASE set selected, as with the regular MIPS and microMIPS instruction sets. Retain the property of `objdump -m mips:16' disassembling all MIPS16 instructions however, regardless of any ISA level recorded in the binary examined. To validate the disassembler use the GAS test suite for its convenience of running tests across multiple ISAs, even though placing the tests in the binutils test suite would be more appropriate. Adjust the single binutils test which depends on 64-bit instruction disassembly to have the ISA level required actually recorded in the binary examined. opcodes/ * mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry. (print_insn_mips16): Check opcode entries for validity against the ISA level and ASE set selected. binutils/ * testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module' rather than `.set' to set the ISA level. gas/ * testsuite/gas/mips/mips16-sub.d: New test. * testsuite/gas/mips/mips16-32@mips16-sub.d: New test. * testsuite/gas/mips/mips16e-32@mips16-sub.d: New test. * testsuite/gas/mips/mips16e-sub.d: New test. * testsuite/gas/mips/mips16-32@mips16e-sub.d: New test. * testsuite/gas/mips/mips16-64@mips16e-sub.d: New test. * testsuite/gas/mips/mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16-sub.s: New test source. * testsuite/gas/mips/mips16e-sub.s: New test source. * testsuite/gas/mips/mips16e-64-sub.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests.
2016-12-20MIPS/GAS/testsuite: Add RESTORE instruction to `mips16e' testMaciej W. Rozycki3-1/+8
Add a RESTORE instruction smoke test to the `mips16e' GAS test. gas/ * testsuite/gas/mips/mips16e.s: Add a RESTORE instruction. * testsuite/gas/mips/mips16e.d: Adjust accordingly.
2016-12-20MIPS/GAS/testsuite: Extend MIPS16 testing over multiple ISAsMaciej W. Rozycki24-167/+1990
Run the `mips16', `mips16-64', `mips16e-64', `mips16-macro', `mips16-macro-e' and `mips16-macro-t' GAS tests over multiple MIPS16 ISAs. gas/ * testsuite/gas/mips/mips16.d: Adjust test for multiple MIPS16 ISA testing. * testsuite/gas/mips/mips16-64.d: Adjust test for multiple MIPS16 ISA testing. * testsuite/gas/mips/mips16e-64.d: Adjust test for multiple MIPS16 ISA testing. * testsuite/gas/mips/mips16-macro.d: Adjust test for multiple MIPS16 ISA testing. * testsuite/gas/mips/mips16e-64.s: Ensure MIPS16 ISA annotation. * testsuite/gas/mips/mips16e-64.l: Rename to... * testsuite/gas/mips/mips16e-32@mips16e-64.l: ... this. * testsuite/gas/mips/mips16-64@mips16.d: New test. * testsuite/gas/mips/mips16-64@mips16-64.d: New test. * testsuite/gas/mips/mips16e-32@mips16e-64.d: New test. * testsuite/gas/mips/mips16-32@mips16-macro.d: New test. * testsuite/gas/mips/mips16-64@mips16-macro.d: New test. * testsuite/gas/mips/mips16e-32@mips16-macro.d: New test. * testsuite/gas/mips/mips16-32@mips16-macro-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-macro-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-macro-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-macro-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16e-64.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-macro.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-macro.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips.exp: Run `mips16', `mips16-64', `mips16-macro', `mips16-macro-t', `mips16-macro-e' and `mips16e-64' testing across multiple MIPS16 ISAs. Fold `mips16-macro' and `mips16e-64' list test invocations into corresponding dump tests.
2016-12-20MIPS/GAS/testsuite: Implement individual MIPS16 ISA testingMaciej W. Rozycki6-7/+177
Implement individual MIPS16 ISA GAS testing for the 32-bit and 64-bit variants of the base MIPS16 and the MIPS16e ISA each. gas/ * testsuite/gas/mips/mips.exp (run_dump_test_arch): Add `mips16e' and `mips16' prefixes. (run_list_test_arch): Likewise. Rename `mips16' architecture to `mips16-32'. Add `mips16-64', `mips16e-32' and `mips16e-64' architectures. Update `rol64', `mips16e', `elf${el}-rel2' and `elf-rel4' test invocations accordingly. * testsuite/gas/mips/mips16e@branch-swap-3.d: New test. * testsuite/gas/mips/mips16e@branch-swap-4.d: New test. * testsuite/gas/mips/mips16e@loc-swap-dis.d: New test. * testsuite/gas/mips/mips16e@loc-swap.d: New test.
2016-12-20MIPS/GAS/testsuite: Fix trailing padding in `loc-swap.s'Maciej W. Rozycki5-4/+11
Pad alignment with zeros rather than NOP instructions, for sensible multi-ISA MIPS16 testing. gas/ * testsuite/gas/mips/loc-swap.s: Use zeros rather than NOPs for trailing alignment padding. * testsuite/gas/mips/loc-swap.d: Adjust accordingly. * testsuite/gas/mips/micromips@loc-swap.d: Likewise. * testsuite/gas/mips/mips16@loc-swap-dis.d: Likewise.
2016-12-20MIPS16: Switch to 32-bit opcode table interpretationMaciej W. Rozycki14-24/+375
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to how the microMIPS opcode table is handled, for both the `match' and `mask' fields, removing special casing for JAL and JALX instructions and their `a' and `i' operand codes throughout, while retaining automatic processing of extendable opcodes in assembly and disassembly. In assembly disallow size enforcement suffixes as appropriate: `.t' for both 32-bit instructions and macros and `.e' for macros only, making macro handling consistent with the microMIPS instruction set. In disassembly fully decode EXTEND prefixes prepended to unsupported instruction encodings (according to the ISA selection) rather than dumping them as hexadecimal data along with the following instruction, removing all special casing for the EXTEND prefix and making its handling rely on its opcode table entry, except where it is considered a part of an extendable instruction. include/ * opcode/mips.h (mips_opcode_32bit_p): New inline function. gas/ * config/tc-mips.c (micromips_insn_length): Use `mips_opcode_32bit_p'. (is_size_valid): Adjust description. (is_size_valid_16): New function. (validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16 operand decoding. (validate_mips16_insn): Remove `a' and `i' operand code special casing, use `mips_opcode_32bit_p' to determine instruction width. (append_insn): Adjust forced MIPS16 instruction size determination. (match_mips16_insn): Likewise. Don't shift the instruction's opcode with the `a' and `i' operand codes. Use `mips_opcode_32bit_p' in operand decoding. (match_mips16_insns): Check for forced instruction size's validity. (mips16_ip): Don't force instruction size in the `noautoextend' mode. * testsuite/gas/mips/mips16-jal-e.d: New test. * testsuite/gas/mips/mips16-jal-t.d: New test. * testsuite/gas/mips/mips16-macro-e.d: New test. * testsuite/gas/mips/mips16-macro-t.d: New test. * testsuite/gas/mips/mips16-jal-t.l: New stderr output. * testsuite/gas/mips/mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips16-jal-e.s: New test source. * testsuite/gas/mips/mips16-jal-t.s: New test source. * testsuite/gas/mips/mips16-macro-e.s: New test source. * testsuite/gas/mips/mips16-macro-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_mips16_insn_arg): Always handle `extend' and `insn' together, with `extend' as the high-order 16 bits. (match_kind): New enum. (print_insn_mips16): Rework for 32-bit instruction matching. Do not dump EXTEND prefixes here. * mips16-opc.c (mips16_opcodes): Move "extend" entry to the end. Recode `match' and `mask' fields as 32-bit in absolute "jal" and "jalx" entries. binutils/ * testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust test for separate EXTEND prefix disassembly.
2016-12-20MIPS16/opcodes: Correct 64-bit macros' ISA membershipMaciej W. Rozycki3-0/+18
Limit the DDIV, DDIVU, DREM, DREMU and DSUBU macros to the MIPS III rather than MIPS I ISA. These macros expand to machine code sequences including 64-bit instructions which require a 64-bit ISA. Entries for those instructions are already correctly marked, however the marking is ignored if entries are used in the process of macro expansion rather than directly, making it possible to indirectly produce 64-bit machine code even when output requested has been limited to a 32-bit ISA. opcodes/ * mips16-opc.c (mips16_opcodes): Set membership to I3 rather than I1 for the "ddiv", "ddivu", "drem", "dremu" and "dsubu" INSN_MACRO entries. gas/ * testsuite/gas/mips/mips16-macro.l: New list test. * testsuite/gas/mips/mips.exp: Run the new test.
2016-12-20MIPS16/opcodes: Correct I64/SDRASP opcode's ISA membershipMaciej W. Rozycki5-0/+20
Limit the `SD ra, offset(sp)' instruction (I64/SDRASP major/minor opcode) to the MIPS III rather than MIPS I ISA. This is a 64-bit instruction requiring a 64-bit ISA. This bug has been there since forever. opcodes/ * mips16-opc.c (mips16_opcodes): Set membership to I3 rather than I1 for the SP-relative "sd"/$ra entry (SDRASP minor opcode). gas/ * testsuite/gas/mips/mips16-sdrasp.d: New test. * testsuite/gas/mips/mips16-sdrasp.l: New stderr output. * testsuite/gas/mips/mips16-sdrasp.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test.
2016-12-20MIPS/GAS/testsuite: Correct NewABI test selectionMaciej W. Rozycki2-27/+84
Make sure all tests that require NewABI support are only run with `has_newabi' targets, removing numerous `mips-sgi-irix5' failures. gas/ * testsuite/gas/mips/mips.exp: Limit remaining tests that require NewABI support to `has_newabi' targets.
2016-12-20Don't define RISC-V .p2alignAndrew Waterman3-42/+82
* config/tc-riscv.c (riscv_pseudo_table): Remove "align", "p2align", and "balign". (s_align): Remove. (riscv_handle_align): New function. (riscv_frag_align_code): Likewise. (riscv_make_nops): Likewise. * config/tc-riscv.h (MAX_MEM_FOR_RS_ALIGN_CODE): Change to 7. (HANDLE_ALIGN): Define. (md_do_align): Define. (riscv_handle_align): Declare. (riscv_frag_align_code): Likewise.
2016-12-20Re-work RISC-V gas flags: now we just support -mabi and -marchAndrew Waterman5-123/+122
We've decided to standardize on two flags for RISC-V: "-march" sets the target architecture (which determines which instructions can be generated), and "-mabi" sets the target ABI. We needed to rework this because the old flag set didn't support soft-float or single-float ABIs, and didn't support an x32-style ABI on RISC-V. Additionally, we've changed the behavior of the -march flag: it's now a lot stricter and only parses things we can actually understand. Additionally, it's now lowercase-only: the rationale is that while the RISC-V ISA manual specifies that ISA strings are case-insensitive, in Linux-land things are usually case-sensitive. Since this flag can be used to determine library paths, we didn't want to bake some case-insensitivity in there that would case trouble later. This patch implements these two new flags and removes the old flags that could conflict with these. There wasn't a RISC-V release before, so we want to just support a clean flag set. include/ * elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define. (EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define. (EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define. (EF_RISCV_FLOAT_ABI_QUAD): Define. bfd/ * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT. binutils/ * readelf.c (get_machine_flags): Use EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of EF_RISCV_{SOFT,HARD}_FLOAT. gas/ * config/tc-riscv.h (xlen): Delete. * config/tc-riscv.c (xlen): Make static. (abi_xlen): New variable. (options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC} with OPTION_MABI. (md_longopts): Likewise. (md_parse_option): Likewise. (riscv_elf_final_processing): Likewise. * doc/as.texinfo (Target RISC-V options): Likewise. * doc/c-riscv.texi (OPTIONS): Likewise. * config/tc-riscv.c (float_mode): Removed. (float_abi): New type, specifies the floating-point ABI. (riscv_set_abi): New function. (riscv_add_subset): Only allow lower-case ISA names and require them to start with "rv". (riscv_after_parse_args): Likewise. opcodes/ * riscv-dis.c (riscv_disassemble_insn): Default to the ELF's XLEN when none is provided.
generated by cgit v1.1 at 2024-11-25 11:04:56 +0000