| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
if the section's size was rounded up.
|
|
pcrel_offset and not partial_inplace, adjust reloc->addend to
compensate for a bfd_perform_relocation bug.
|
|
V9 bugfix.
See changelog...
|
|
* config/obj-ecoff.c (ecoff_frob_file): Write out register masks
by modifying .reginfo section, not by directly modifying BFD
backend data.
|
|
* expr.h (expressionS): New field X_unsigned.
* expr.c (operand): Initialize X_unsigned to 1. Set it to 0 for
unary minus case.
(expr) Fix typo resultP to right if missing operand. Set
X_unsigned to 1 when building new expression.
* read.c (potable): Make "octa" and "quad" call cons, not
big_cons.
(cons): Handle bignums. If given an O_constant (small integer) to
fill a big space, turn it into a bignum.
(parse_bitfield_cons): Set X_unsigned field.
(bignum_low, bignum_limit, bignum_high, grow_bignum, big_cons):
Removed.
* read.h (big_cons): Remove prototype.
* symbols.c (resolve_symbol_value): Don't give a warning if a
symbol in expr_section can not be resolved.
(S_SET_VALUE): Clear X_unsigned.
* write.c (write_object_file): If resolve_symbol_value failed on a
symbol we are writing out, give a warning.
* config/tc-h8500.c (parse_reglist): Set X_unsigned.
* config/tc-hppa.c (md_pseudo_table): Change "octa" and "quad" to
call pa_cons, not pa_big_cons.
(pa_big_cons): Remove.
* config/tc-hppa.h (pa_big_cons): Remove declaration.
* config/tc-i960.c (md_pseudo_table): Change "quad" to call cons,
not big_cons.
|
|
* config/obj-elf.h (S_SET_SIZE): Actually set the size.
|
|
|
|
|
|
(merge_data_into_text, relax_and_size_all_segments): New fns, split out from
write_object_file.
|
|
|
|
type and to delay the computation of the expression until the
value is actually needed. This permits setting symbols to values
calculated based on object code size. Expressions were changed to
no longer be in a section, to stop the overloading of segment and
expression type that previously occurred.
* as.c (big_section, pass1_section, diff_section, absent_section):
Removed.
(expr_section): Added (used for dummy symbols which hold
intermediate expression values).
(perform_an_assembly_pass): Create expr_section, do not create the
sections now removed.
* as.h (segT): Removed SEG_ABSENT, SEG_PASS1, SEG_BIG, and
SEG_DIFFERENCE. Added SEG_EXPR.
(SEG_NORMAL): Corresponding changes.
* subsegs.c (seg_name, subsegs_begin): Changed accordingly.
* write.c (write_object_file): Ditto.
* config/obj-aout.c (seg_N_TYPE): Ditto.
* config/obj-bout.c (seg_N_TYPE): Ditto.
* config/obj-coff.c (seg_N_TYPE): Ditto.
* config/obj-coffbfd.c (seg_N_TYPE): Ditto.
* config/obj-vms.c (seg_N_TYPE): Ditto.
* expr.h (operatorT): Moved in from expr.c, added some values.
(expressionS): Added X_op field, removed X_seg field; renamed
X_subtract_symbol to X_op_symbol.
* expr.c: Extensive changes to assign expression types rather than
sections and to simplify the parsing.
* write.c (fix_new_internal): New static function.
(fix_new): Removed sub_symbol argument.
(fix_new_exp): New function, takes expression argument.
* write.h: Prototype changes for fix_new and fix_new_exp.
* cond.c (s_if): Changed accordingly.
* read.c (s_lsym, pseudo_set, emit_expr, parse_bitfield_cons,
parse_repeat_cons, get_segmented_expression,
get_known_segmented_expression, get_absolute_expression): Ditto.
* symbols.c (resolve_symbol_value, S_GET_VALUE, S_SET_VALUE):
Ditto.
* write.c (write_object_file): Ditto.
* config/obj-coff.c (obj_coff_def, obj_coff_val): Ditto.
* config/obj-coffbfd.c (obj_coff_def, obj_coff_val,
obj_coff_endef, yank_symbols): Ditto.
* config/obj-elf.c (obj_elf_stab_generic, obj_elf_size): Ditto.
* config/tc-a29k.c (md_assemble, parse_operand, machine_ip,
print_insn, md_operand): Ditto.
* config/tc-h8300.c (parse_exp, colonmod24, check_operand,
do_a_fix_imm, build_bytes): Ditto.
* config/tc-h8500.c (parse_exp, skip_colonthing, parse_reglist,
get_specific, check, insert, md_convert_frag): Ditto.
* config/tc-hppa.c (the_insn, fix_new_hppa, cons_fix_new_hppa,
md_assemble, pa_ip, getExpression, getAbsoluteExpression,
evaluateAbsolute, pa_build_unwind_subspace, pa_entry,
process_exit): Ditto.
* config/tc-hppa.h (STAB_FIXUP, is_DP_relative, is_PC_relative,
is_complex): Ditto.
* config/tc-i386.c (pe, md_assemble, i386_operand,
md_estimate_size_before_relax, md_create_long_jump): Ditto.
* config/tc-i860.c (md_assemble, getExpression, print_insn):
Ditto.
* config/tc-i960.c (parse_expr, subs, segs, md_convert_frag,
get_cdisp, mem_fmt, parse_ldconst, relax_cobr, s_sysproc,
i960_handle_align): Ditto.
* config/tc-m68k.c (struct m68k_exp, struct m68k_it, seg, op,
subs, add_fix, isvar, m68k_ip, md_assemble, md_convert_frag_1,
md_estimate_size_before_relax, md_create_long_jump, get_num):
Ditto.
* config/tc-m88k.c (md_assemble, get_imm16, get_pcr,
md_create_short_jump, md_create_long_jump): Ditto.
* config/tc-mips.c (md_assemble, append_insn, gp_reference,
macro_build, macro, my_getExpression): Ditto. Also removed
get_optional_absolute_expression; just use get_absolute_expression
instead.
* config/tc-ns32k.c (get_addr_mode, evaluate_expr, convert_iif,
fix_new_ns32k, fix_new_ns32k_exp, cons_fix_new_ns32k): Ditto.
* config/tc-ns32k.h (fix_new_ns32k prototype): Ditto.
* config/tc-sh.c (parse_exp, check, insert, md_convert_frag):
Ditto.
* config/tc-sparc.c (md_assemble, sparc_ip, getExpression,
print_insn): Ditto.
* config/tc-tahoe.c (struct top, md_estimate_size_before_relax,
tip_op, md_assemble): Ditto.
* config/tc-vax.c (seg_of_operand, md_assemble,
md_estimate_size_before_relax, md_create_long_jump): Ditto.
* config/tc-z8k.c (parse_exp, check_operand, newfix): Ditto.
|
|
instead of bzero.
(write_object_file): Apply write_relocs to each section before applying
write_contents.
|
|
as the value of a symbol.
* struc-symbol.h (struct symbol): Removed sy_forward field. Added
sy_resolved and sy_resolving single bit fields.
* symbols.c (symbol_new): Don't initialize sy_forward field.
(resolve_symbol_value): New function to adjust symbol value by
fragment address, using recursion to resolve forward symbols.
* symbols.h: Added prototype for new function.
* read.c (pseudo_set): Set symbolP->sy_value to an undefined
expression rather than setting symbolP->sy_forward.
* write.c (write_object_file): Use resolve_symbol_value on
symbols, keeping the common case (the old behaviour) inline.
* config/obj-aout.c (obj_aout_frob_symbol): Removed sy_forward
handling (subsumed by write.c change).
* config/obj-coff.c, config/obj-coffbfd.c (obj_coff_val): Set
sy_value rather than sy_forward.
* config/obj-coffbfd.c (obj_coff_endef, yank_symbols): Check
expression segment rather than sy_forward.
(yank_symbols): Use resolve_symbol_value.
(crawl_symbols): Removed extra pass over symbols.
* config/obj-aout.c, config/obj-bout.c, config/obj-coff.c,
config/obj-vms.c (obj_crawl_symbol_chain): Removed extra pass over
symbols which handled sy_forward; use resolve_symbol_value
instead.
* config/obj-coff.h, config/obj-coffbfd.h (obj_frob_forward_symbol):
Define.
* config/obj-elf.c (obj_elf_stab_generic): Check expression
segment rather than sy_forward.
* config/obj-vms.c (VMS_Check_For_Main): Don't initialize
sy_forward; do initialize sy_resolved and sy_resolving.
* config/tc-hppa.h (STAB_FIXUP): Use sy_value, not sy_forward.
|
|
just a longword:
* struc-symbol.h: New field sy_value.
* as.h: Include expr.h before struc-symbol.h.
* expr.h: Use struct symbol rather than symbolS.
* symbols.c (S_GET_VALUE, S_SET_VALUE): Rewrote to retrieve value
of sy_value field; compile unconditionally, not just if
BFD_ASSEMBLER.
* symbols.h: Compile S_{SG}ET_VALUE prototypes unconditionally.
* write.c (write_object_file): Set BFD symbol value to gas symbol
value.
* config/obj-aout.h, config/obj-bout.h, config/obj-coff.h,
config/obj-coffbfd.h, config/obj-generic.h, config/obj-vms.h
(S_GET_VALUE, S_SET_VALUE): Removed macro definitions.
* config/obj-ieee.c (S_GET_VALUE, S_SET_VALUE): Removed.
* config/obj-coff.h, obj-coffbfd.h: Rewrote several macros to use
S_GET_VALUE rather than ost_entry.n_value.
* config/obj-aout.c (obj_symbol_to_chars), config/obj-bout.c
(obj_symbol_to_chars), config/obj-coff.c (obj_symbol_to_chars),
config/obj-coffbfd.c (symbol_to_chars): Get value to write out
using S_GET_VALUE--don't assume it is already set.
* config/obj-ieee.c (do_symbols): Set BFD symbol value to gas
symbol value.
* config/obj-vms.c (various): Don't assign directly to
S_GET_VALUE; use S_SET_VALUE instead.
|
|
Supply prototype for bfd_alloc for now.
(fixup_segment): Local add_number is now valueT. Fix some range-checking bugs.
(relax_align): Type `int' should be sufficient for the exponent.
(fix_new): Argument offset is offsetT. Locals size and newsize are valueT.
|
|
the section contents.
* config/obj-ecoff.h, config/obj-ecoff.c: Numerous changes to get
symbol table and values right.
* config/tc-mips.h (LOCAL_LABEL): If OBJ_ECOFF, any label starting
with $L is local.
* config/tc-mips.c (tc_gen_reloc): If OBJ_ECOFF, adjust the addend
by the section vma.
* config/z8k.mt (TARG_CPU_DEPENDENTS): The relevant file is
z8k-opc.h, not z8k.h.
|
|
to be on a single line.
|
|
|
|
* app.c, config/tc-*.c: Don't include read.h, since it is already
included by as.h.
* These are based on patches from Minh Tran-le
<mtranle@paris.intellicorp.com>.
* configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
obj_format coffbfd and gas_target i386coff for target.
(i[34]86-*-isc*): New host (uses sysv).
* config/i386aix.mt: Removed (no longer used).
* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
(MINUS_G): Removed.
(LDFLAGS): Added, defined as -shlib.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
* config/te-sco386.h (LOCAL_LABEL): Don't define.
(DOT_LABEL_PREFIX): Define.
* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
name rather than L0\001.
* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
local_bss_counter.
* symbols.c, symbols.h (local_bss_counter): Removed.
* write.c (write_object_file): bss no longer uses
local_bss_counter. Pass correct data and bss size to
VMS_write_object_file.
* config/obj-vms.c (VMS_write_object_file): Accept bss size as
argument, rather than using local_bss_counter.
* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
(size_section): Restored sanity check.
(do_relocs_for): Base section address on s_paddr rather than
computing it. Adjust a29k R_IHIHALF special case to account for
section paddr (used to require paddr to be zero). If there are no
reclos, set s_relptr to 0. Set relocation size in object_headers.
(fill_section): Always set s_vaddr here, removing
ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
Set STYP_INFO for .comment.
(coff_header_append): Use object headers and H_{SET,GET}_* macros.
Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
(crawl_symbols): Handle 8 character section name correctly. Use
H_{SET,GET}_* macros.
(do_linenos_for): Set lineno size in object_headers.
(write_object_file): Use H_{SET,GET}_* macros. Don't bother to
set s_vaddr here. If string_byte_count remains 4, set it back to
0, and only write strings out if there are some. Call
fill_section before do_relocs_for and do_linenos_for.
(obj_coff_section): Handle optional quoted second argument giving
section characteristics.
(obj_coff_bss): Added to handle .bss.
(obj_coff_ident): Added to handle .ident (puts string in .comment
section).
(obj_coff_lcomm): Put common symbols in .bss, not .data.
(fixup_mdeps): Change to segment. Call frag_wane after
md_convert_frag.
(fixup_segment): Explicitly check S_IS_COMMON before making 386
adjustment (already happened only for common symbols, but this is
clearer).
* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
* config/tc-i386.c (s_bss): Don't use if I386COFF.
(md_pseudo_table): Ignore .optim and .noopt.
(tc_coff_sizemachdep): New function.
* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
compatibility.
(LOCAL_LABEL): Removed definition.
(DOT_LABEL_PREFIX): Defined.
|
|
* write.c, obj-ieee.c: don't define SUB_SEGMENT_ALIGN if it is
already defined.
|
|
Deleted some unused code.
Fixed some declarations to use PARAMS macro.
Fixed up configure.in for new targets.
Some whitespace/comment fixes.
Merged config/ChangeLog.
|
|
Removed some unneeded files.
configure.in: Don't look for te-386bsd.h, which doesn't exist...
|
|
* write.c (fixup_segment): fixed missing parens in expression
checking for byte or word overflow.
|
|
|
|
as data0_frchainP
* write.c (write_object_file): various changes to handle data in
the BSS segment in much the same was as stuff in the DATA segment.
* subsegs.c (subseg_change): allow and handle a change into SEG_BSS.
|
|
* expr.c(expr): allow SEG_REGISTER in expressions.
* read.c(pseudo_set): register expressions can be the source of a
set.
* subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
goto SEG_TEXT (if a.out)
* write.c (write_object_file): If a.out don't use the old way for
-R.
* config/obj-a.out (s_sect): complain if the user tries to use a
subsegment with a value which might interfere with out -R hackery.
* config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
rather than use ugly if tree. (init_regtable): insert register
names into symbol table.
|
|
|
|
compiler lies about being ANSI conformant.
|
|
be better to #define NEED_FX_R_TYPE in TC_A29K and TC_SPARC instead of
having this complicated conditional, but that's not my call.
|
|
* as.c: fix typo recently introduced.
* as.h : Don't include aout/reloc.h - it's not right for COFF!
* expr.c: Much rewriting, to accomodate MRI syntax for
expressions. Also easier to read now.
* listing.c: Put back defuns
* read.c: modified to accept MRI syntax, put back listing pseudo
ops so that an assembler built with NO_LISTING ignores list ops
rather than pukes.
* write.c, write.h: fixs - only keep a reloc type in a fix if the target
machine is a SPARC or a 29K.
* config/obj-aout.c: added s_sect pseudo op
* config/obj-coffbfd.c: lints, set the filehdr flags right and
fill in the timestamp.
* config/obj-coffbfd.h: Since we don't include aout/reloc.h
anymore, define all the relocs which the tc-<x> bit will use so we
can translate from them to the coff types.
* config/tc-a29k.c: reloc_type isn't ane enum any more
* config/tc-m68k.c: Added NO_RELOC definition.
Now compiles for sparc aout, 68k aout (MRI and MIT syntax),
29k coff.
So far works as replacement for sparc and 68k /bin/as.
|
|
coff as it appears to be used on aix386.
|
|
|
|
== 1. Get the declarations right in listing.[hc].
|
|
tagged as "vanilla" for your convenience.
There are also some comment changes.
|
|
* read.c: Use xmalloc, not malloc.
* expr.c, input-scrub.c, write.c: Avoid "know" macros
that cover more than one line, since this causes char strings
with embedded newlines.
|
|
|
|
|
