| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
pseudo-op with a poc_handler field of NULL, ignore it and treat it
as an instruction instead.
* config/tc-m88k.c (md_pseudo_table): Add "set" with a NULL
poc_handler field.
|
|
up opcodes as pseudo-ops even if they don't start with '.'.
* config/tc-m88k.h (NO_PSEUDO_DOT): Define.
* config/tc-m88k.c (md_assemble): Removed special pseudo-op
handling.
(md_apply_fix): Set fx_offset to the upper 16 bits of the reloc.
Output the low 16 bits for RELOC_HI16, not the high 16 bits.
* config/obj-coffbfd.c (do_relocs_for): If TC_M88K, set the
r_offset field of the reloc to the fixup offset.
(fixup_segments): If TC_M88K, don't warn about fixup overflows.
* doc/as.texinfo: Minor updates.
|
|
type and to delay the computation of the expression until the
value is actually needed. This permits setting symbols to values
calculated based on object code size. Expressions were changed to
no longer be in a section, to stop the overloading of segment and
expression type that previously occurred.
* as.c (big_section, pass1_section, diff_section, absent_section):
Removed.
(expr_section): Added (used for dummy symbols which hold
intermediate expression values).
(perform_an_assembly_pass): Create expr_section, do not create the
sections now removed.
* as.h (segT): Removed SEG_ABSENT, SEG_PASS1, SEG_BIG, and
SEG_DIFFERENCE. Added SEG_EXPR.
(SEG_NORMAL): Corresponding changes.
* subsegs.c (seg_name, subsegs_begin): Changed accordingly.
* write.c (write_object_file): Ditto.
* config/obj-aout.c (seg_N_TYPE): Ditto.
* config/obj-bout.c (seg_N_TYPE): Ditto.
* config/obj-coff.c (seg_N_TYPE): Ditto.
* config/obj-coffbfd.c (seg_N_TYPE): Ditto.
* config/obj-vms.c (seg_N_TYPE): Ditto.
* expr.h (operatorT): Moved in from expr.c, added some values.
(expressionS): Added X_op field, removed X_seg field; renamed
X_subtract_symbol to X_op_symbol.
* expr.c: Extensive changes to assign expression types rather than
sections and to simplify the parsing.
* write.c (fix_new_internal): New static function.
(fix_new): Removed sub_symbol argument.
(fix_new_exp): New function, takes expression argument.
* write.h: Prototype changes for fix_new and fix_new_exp.
* cond.c (s_if): Changed accordingly.
* read.c (s_lsym, pseudo_set, emit_expr, parse_bitfield_cons,
parse_repeat_cons, get_segmented_expression,
get_known_segmented_expression, get_absolute_expression): Ditto.
* symbols.c (resolve_symbol_value, S_GET_VALUE, S_SET_VALUE):
Ditto.
* write.c (write_object_file): Ditto.
* config/obj-coff.c (obj_coff_def, obj_coff_val): Ditto.
* config/obj-coffbfd.c (obj_coff_def, obj_coff_val,
obj_coff_endef, yank_symbols): Ditto.
* config/obj-elf.c (obj_elf_stab_generic, obj_elf_size): Ditto.
* config/tc-a29k.c (md_assemble, parse_operand, machine_ip,
print_insn, md_operand): Ditto.
* config/tc-h8300.c (parse_exp, colonmod24, check_operand,
do_a_fix_imm, build_bytes): Ditto.
* config/tc-h8500.c (parse_exp, skip_colonthing, parse_reglist,
get_specific, check, insert, md_convert_frag): Ditto.
* config/tc-hppa.c (the_insn, fix_new_hppa, cons_fix_new_hppa,
md_assemble, pa_ip, getExpression, getAbsoluteExpression,
evaluateAbsolute, pa_build_unwind_subspace, pa_entry,
process_exit): Ditto.
* config/tc-hppa.h (STAB_FIXUP, is_DP_relative, is_PC_relative,
is_complex): Ditto.
* config/tc-i386.c (pe, md_assemble, i386_operand,
md_estimate_size_before_relax, md_create_long_jump): Ditto.
* config/tc-i860.c (md_assemble, getExpression, print_insn):
Ditto.
* config/tc-i960.c (parse_expr, subs, segs, md_convert_frag,
get_cdisp, mem_fmt, parse_ldconst, relax_cobr, s_sysproc,
i960_handle_align): Ditto.
* config/tc-m68k.c (struct m68k_exp, struct m68k_it, seg, op,
subs, add_fix, isvar, m68k_ip, md_assemble, md_convert_frag_1,
md_estimate_size_before_relax, md_create_long_jump, get_num):
Ditto.
* config/tc-m88k.c (md_assemble, get_imm16, get_pcr,
md_create_short_jump, md_create_long_jump): Ditto.
* config/tc-mips.c (md_assemble, append_insn, gp_reference,
macro_build, macro, my_getExpression): Ditto. Also removed
get_optional_absolute_expression; just use get_absolute_expression
instead.
* config/tc-ns32k.c (get_addr_mode, evaluate_expr, convert_iif,
fix_new_ns32k, fix_new_ns32k_exp, cons_fix_new_ns32k): Ditto.
* config/tc-ns32k.h (fix_new_ns32k prototype): Ditto.
* config/tc-sh.c (parse_exp, check, insert, md_convert_frag):
Ditto.
* config/tc-sparc.c (md_assemble, sparc_ip, getExpression,
print_insn): Ditto.
* config/tc-tahoe.c (struct top, md_estimate_size_before_relax,
tip_op, md_assemble): Ditto.
* config/tc-vax.c (seg_of_operand, md_assemble,
md_estimate_size_before_relax, md_create_long_jump): Ditto.
* config/tc-z8k.c (parse_exp, check_operand, newfix): Ditto.
|
|
(read_a_source_file, big_cons, float_cons): Use memcpy instead of bcopy.
|
|
undefined symbols.
Fixes PR 2997.
* read.c (s_data), config/obj-coffbfd.c (obj_coff_data): If -R,
switch to text section rather than data section.
Fixes PR 2971.
|
|
REPEAT_CONS_EXPRESSIONS is defined, accept a repeat count.
* symbols.c (colon): Rather than a special case for TC_HPPA,
use new macro tc_frob_label.
|
|
* configure.in (m88k-*-coff*): New target. Use coffbfd and
m88kcoff.
* config/m88kcoff.mt: New file.
* read.c (lex_type): New macro LEX_AT to set lex type of '@'.
(pseudo_set): Handle difference of symbols in different fragments
by saving the entire expression as the value of the symbol.
* symbols.c (resolve_symbol_value): Resolve difference
expressions.
* config/obj-coffbfd.c (obj_pseudo_table): If TC_M88K, accept
"sdef" as a synonym for "def".
* config/obj-coffbfd.h: If TC_M88K, include coff/m88k.h and set
TARGET_FORMAT.
(S_IS_LOCAL): Any symbol which includes \001 in the name is local.
* config/tc-m88k.c, config/tc-m88k.h: Numerous changes to bring
m88k port up to date, and to add COFF support.
|
|
as the value of a symbol.
* struc-symbol.h (struct symbol): Removed sy_forward field. Added
sy_resolved and sy_resolving single bit fields.
* symbols.c (symbol_new): Don't initialize sy_forward field.
(resolve_symbol_value): New function to adjust symbol value by
fragment address, using recursion to resolve forward symbols.
* symbols.h: Added prototype for new function.
* read.c (pseudo_set): Set symbolP->sy_value to an undefined
expression rather than setting symbolP->sy_forward.
* write.c (write_object_file): Use resolve_symbol_value on
symbols, keeping the common case (the old behaviour) inline.
* config/obj-aout.c (obj_aout_frob_symbol): Removed sy_forward
handling (subsumed by write.c change).
* config/obj-coff.c, config/obj-coffbfd.c (obj_coff_val): Set
sy_value rather than sy_forward.
* config/obj-coffbfd.c (obj_coff_endef, yank_symbols): Check
expression segment rather than sy_forward.
(yank_symbols): Use resolve_symbol_value.
(crawl_symbols): Removed extra pass over symbols.
* config/obj-aout.c, config/obj-bout.c, config/obj-coff.c,
config/obj-vms.c (obj_crawl_symbol_chain): Removed extra pass over
symbols which handled sy_forward; use resolve_symbol_value
instead.
* config/obj-coff.h, config/obj-coffbfd.h (obj_frob_forward_symbol):
Define.
* config/obj-elf.c (obj_elf_stab_generic): Check expression
segment rather than sy_forward.
* config/obj-vms.c (VMS_Check_For_Main): Don't initialize
sy_forward; do initialize sy_resolved and sy_resolving.
* config/tc-hppa.h (STAB_FIXUP): Use sy_value, not sy_forward.
|
|
|
|
expr.c (__): Undefine before defining.
as.c (got_sig): Don't return anything; return type might be void.
Whitespace/comment cleanup in frags.c.
Some patches for `-pedantic' or `-fno-common' compilation.
(Some of these changes are from Michael Meissner; see change log.)
|
|
comment_chars.
(do_scrub_next_char): If a line comment character is not at the
start of a line, treat it as a comment character if it is one.
For a CPP line comment use pseudo-op .appline rather than .line.
* input-scrub.c (logical_input_line): Make int rather than
unsigned.
(input_scrub_push, input_scrub_begin): Initialize
logical_input_line to -1 rather than 0.
(bump_line_counters): Increment logical_input_line.
(new_logical_line): If line_number is -2, decrement
logical_input_line.
(as_where): Use logical_input_line even if it is 0.
* read.h (s_app_file prototype): Now takes an int argument.
* read.c (potable): Make .appfile call s_app_file with 1. New
.appline pseudo-op calls s_app_line.
(s_app_file): If .appfile, call new_logical_line with -2 to
account for newline inserted by do_scrub_next_char. If listing,
call listing_source_file.
(s_app_line): New function to handle fake pseudo-op .appline.
* config/obj-coff.c (obj_pseudo_table): Make .appline call
obj_coff_ln.
(obj_coff_ln): Added argument to indicate whether .appline.
* config/obj-coffbfd.c (obj_pseudo_table): Make .appline call
obj_coff_ln.
(obj_coff_ln): Added argument to indicate whether .appline.
* config/tc-mips.c (s_file): Pass argument to s_app_file.
|
|
fix -- should be cleaned up later.)
(s_ignore): Delete declaration of is_end_of_line.
(potable): Change .app-file to .appfile.
|
|
|
|
|
|
|
|
as soon as I check in as.h.
(s_lcomm): Likewise with bss_section.
(s_fill): Use memset, not bzero.
whitespace/comment changes.
deleted some "#ifdef DONTDEF" sections relating to GDB symtabs.
|
|
* app.c, config/tc-*.c: Don't include read.h, since it is already
included by as.h.
* These are based on patches from Minh Tran-le
<mtranle@paris.intellicorp.com>.
* configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
obj_format coffbfd and gas_target i386coff for target.
(i[34]86-*-isc*): New host (uses sysv).
* config/i386aix.mt: Removed (no longer used).
* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
(MINUS_G): Removed.
(LDFLAGS): Added, defined as -shlib.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
* config/te-sco386.h (LOCAL_LABEL): Don't define.
(DOT_LABEL_PREFIX): Define.
* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
name rather than L0\001.
* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
local_bss_counter.
* symbols.c, symbols.h (local_bss_counter): Removed.
* write.c (write_object_file): bss no longer uses
local_bss_counter. Pass correct data and bss size to
VMS_write_object_file.
* config/obj-vms.c (VMS_write_object_file): Accept bss size as
argument, rather than using local_bss_counter.
* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
(size_section): Restored sanity check.
(do_relocs_for): Base section address on s_paddr rather than
computing it. Adjust a29k R_IHIHALF special case to account for
section paddr (used to require paddr to be zero). If there are no
reclos, set s_relptr to 0. Set relocation size in object_headers.
(fill_section): Always set s_vaddr here, removing
ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
Set STYP_INFO for .comment.
(coff_header_append): Use object headers and H_{SET,GET}_* macros.
Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
(crawl_symbols): Handle 8 character section name correctly. Use
H_{SET,GET}_* macros.
(do_linenos_for): Set lineno size in object_headers.
(write_object_file): Use H_{SET,GET}_* macros. Don't bother to
set s_vaddr here. If string_byte_count remains 4, set it back to
0, and only write strings out if there are some. Call
fill_section before do_relocs_for and do_linenos_for.
(obj_coff_section): Handle optional quoted second argument giving
section characteristics.
(obj_coff_bss): Added to handle .bss.
(obj_coff_ident): Added to handle .ident (puts string in .comment
section).
(obj_coff_lcomm): Put common symbols in .bss, not .data.
(fixup_mdeps): Change to segment. Call frag_wane after
md_convert_frag.
(fixup_segment): Explicitly check S_IS_COMMON before making 386
adjustment (already happened only for common symbols, but this is
clearer).
* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
* config/tc-i386.c (s_bss): Don't use if I386COFF.
(md_pseudo_table): Ignore .optim and .noopt.
(tc_coff_sizemachdep): New function.
* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
compatibility.
(LOCAL_LABEL): Removed definition.
(DOT_LABEL_PREFIX): Defined.
|
|
* listing.c: Call xmalloc, not malloc; don't declare malloc.
* Changes to support SCO 3.2v4:
* read.c (s_align_bytes, s_align_ptwo): If not SEG_DATA or
SEG_BSS, fill with NOP_OPCODE.
* config/i386coff.mt: Add opcode/i386.h to TARG_CPU_DEPENDENTS.
* config/obj-coffbfd.c (do_relocs_for): Increment addr even if not
using ZERO_BASED_SEGMENTS.
(fill_section): If ZERO_BASED_SEGMENTS, set segment addresses, but
never set segment address for SEG_E2 (.bss) and don't write out
SEG_E2 contents. Set .init and .fini sections to STYP_TEXT.
(obj_coff_endef): Don't merge labels or symbols awaiting forward
definitions, and don't merge tags with non-tags. Check for .bf
rather than just checking whether the second character is b and
the third character is f.
(obj_coff_val): gcc can generate values which we don't handle
correctly; discard information for now, since it only affects the
debugging information.
(tag_find_or_name): Don't insert tags in the symbol table.
(yank_symbols): Don't merge labels.
(write_object_file): Don't define SUB_SEGMENT_ALIGN if it is
already defined. Fill subsegments with NOP_OPCODE, not 0. Don't
set segment address if ZERO_BASED_SEGMENTS.
(obj_coff_section): Accept and ignore a trailing quoted string, as
used in AT&T i386 syntax.
(fixup_segment): Take segment as argument. On the i386, adjust PC
relative addends by the segment vaddr.
* tc-i386.h: Define SUB_SEGMENT_ALIGN.
* tc-a29k.h: Define ZERO_BASED_SEGMENTS.
* tc-i386.c: (i386_operand): If I386COFF, accept any segment type.
|
|
Removed some unneeded files.
configure.in: Don't look for te-386bsd.h, which doesn't exist...
|
|
* Makefile.in: use gas_target instead of modifying target_cpu.
From Steve Chamberlain:
Makefile.in: Handle m68*-*-coff*.
read.c, read.h: add mult argument to s_space
|
|
fix bug where 0's were always placed.
|
|
* app.c (process_escape): new function to handle escapes the right
way, (do_scrub_next_char): use new function
* cond.c (s_ifdef): do ifdef/ifndef right
* read.c (s_fill): make the , expressions optional like the doc
says
* config/tc-h8300.[ch]: better warnings
|
|
* expr.c(expr): allow SEG_REGISTER in expressions.
* read.c(pseudo_set): register expressions can be the source of a
set.
* subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
goto SEG_TEXT (if a.out)
* write.c (write_object_file): If a.out don't use the old way for
-R.
* config/obj-a.out (s_sect): complain if the user tries to use a
subsegment with a value which might interfere with out -R hackery.
* config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
rather than use ugly if tree. (init_regtable): insert register
names into symbol table.
|
|
coff as it appears to be used on aix386.
|
|
|
|
== 1. Get the declarations right in listing.[hc].
|
|
tagged as "vanilla" for your convenience.
There are also some comment changes.
|
|
|
