| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
FB and dollar label definitions can't be enclosed in double quotes. In
fact at that point nul_char is the same as next_char, which we know is a
digit.
|
|
I don't view it as sensible to be more lax when it comes to references
to (uses of) such labels compared to their definition: The latter has
been limited to decimal numerics, while the former permitted any radix.
Beyond that leading zeroes on such labels aren't helpful either. Imo
labels and their use sites would better match literally, to avoid
confusion.
As it turns out, one z80 testcase actually had such an odd use of labels
where definition and use don't match in spelling. That testcase is being
adjusted accordingly.
While there also adjust a comment on a local variable in
integer_constant().
|
|
This patch adds support in GAS to create generic GAS instructions
(a.k.a., the ginsn) for the x86 backend (AMD64 ABI only at this time).
Using this ginsn infrastructure, GAS can then synthesize CFI for
hand-written asm for x86_64.
A ginsn is a target-independent representation of the machine
instructions. One machine instruction may need one or more ginsn.
This patch also adds skeleton support for printing ginsn in the listing
output for debugging purposes.
Since the current use-case of ginsn is to synthesize CFI, the x86 target
needs to generate ginsns necessary for the following machine
instructions only:
- All change of flow instructions, including all conditional and
unconditional branches, call and return from functions.
- All register saves and unsaves to the stack.
- All instructions affecting the two registers that could potentially
be used as the base register for CFA tracking. For SCFI, the base
register for CFA tracking is limited to REG_SP and REG_FP only for
now.
The representation of ginsn is kept simple:
- GAS instruction has GINSN_NUM_SRC_OPNDS (defined to be 2 at this time)
number of source operands and one destination operand at this time.
- GAS instruction uses DWARF register numbers in its representation and
does not track register size.
- GAS instructions carry location information (file name and line
number).
- GAS instructions are ID's with a natural number in order of their
addtion to the list. This can be used as a proxy for the static
program order of the corresponding machine instructions.
Note that, GAS instruction (ginsn) format does not support
GINSN_TYPE_PUSH and GINSN_TYPE_POP. Some architectures, like aarch64,
do not have push and pop instructions, but rather STP/LDP/STR/LDR etc.
instructions. Further these instructions have a variety of addressing
modes, like offset, pre-indexing and post-indexing etc. Among other
things, one of differences in these addressing modes is _when_ the addr
register is updated with the result of the address calculation: before
or after the memory operation. To best support such needs, the generic
instructions like GINSN_TYPE_LOAD, GINSN_TYPE_STORE together with
GINSN_TYPE_ADD, and GINSN_TYPE_SUB may be used.
The functionality provided in ginsn.c and scfi.c is compiled in when a
target defines TARGET_USE_SCFI and TARGET_USE_GINSN. This can be
revisited later when there are other use-cases of creating ginsn's in
GAS, apart from the current use-case of synthesizing CFI for
hand-written asm.
Support is added only for System V AMD64 ABI for ELF at this time. If
the user enables SCFI with --32, GAS issues an error:
"Fatal error: SCFI is not supported for this ABI"
For synthesizing (DWARF) CFI, the SCFI machinery requires the programmer
to adhere to some pre-requisites for their asm:
- Hand-written asm block must begin with a .type foo, @function
It is highly recommended to, additionally, also ensure that:
- Hand-written asm block ends with a .size foo, .-foo
The SCFI machinery encodes some rules which align with the standard
calling convention specified by the ABI. Apart from the rules, the SCFI
machinery employs some heuristics. For example:
- The base register for CFA tracking may be either REG_SP or REG_FP.
- If the base register for CFA tracking is REG_SP, the precise amount of
stack usage (and hence, the value of REG_SP) must be known at all times.
- If using dynamic stack allocation, the function must switch to
FP-based CFA. This means using instructions like the following (in
AMD64) in prologue:
pushq %rbp
movq %rsp, %rbp
and analogous instructions in epilogue.
- Save and Restore of callee-saved registers must be symmetrical.
However, the SCFI machinery at this time only warns if any such
asymmetry is seen.
These heuristics/rules are architecture-independent and are meant to
employed for all architectures/ABIs using SCFI in the future.
gas/
* Makefile.am: Add new files.
* Makefile.in: Regenerated.
* as.c (defined): Handle documentation and listing option for
ginsns and SCFI.
* config/obj-elf.c (obj_elf_size): Invoke ginsn_data_end.
(obj_elf_type): Invoke ginsn_data_begin.
* config/tc-i386.c (x86_scfi_callee_saved_p): New function.
(ginsn_prefix_66H_p): Likewise.
(ginsn_dw2_regnum): Likewise.
(x86_ginsn_addsub_reg_mem): Likewise.
(x86_ginsn_addsub_mem_reg): Likewise.
(x86_ginsn_alu_imm): Likewise.
(x86_ginsn_move): Likewise.
(x86_ginsn_lea): Likewise.
(x86_ginsn_jump): Likewise.
(x86_ginsn_jump_cond): Likewise.
(x86_ginsn_enter): Likewise.
(x86_ginsn_safe_to_skip): Likewise.
(x86_ginsn_unhandled): Likewise.
(x86_ginsn_new): New functionality to generate ginsns.
(md_assemble): Invoke x86_ginsn_new.
(s_insn): Likewise.
(i386_target_format): Add hard error for usage of SCFI with non AMD64 ABIs.
* config/tc-i386.h (TARGET_USE_GINSN): New definition.
(TARGET_USE_SCFI): Likewise.
(SCFI_MAX_REG_ID): Likewise.
(REG_FP): Likewise.
(REG_SP): Likewise.
(SCFI_INIT_CFA_OFFSET): Likewise.
(SCFI_CALLEE_SAVED_REG_P): Likewise.
(x86_scfi_callee_saved_p): Likewise.
* gas/listing.h (LISTING_GINSN_SCFI): New define for ginsn and
SCFI.
* gas/read.c (read_a_source_file): Close SCFI processing at end
of file read.
* gas/scfidw2gen.c (scfi_process_cfi_label): Add implementation.
(scfi_process_cfi_signal_frame): Likewise.
* subsegs.h (struct frch_ginsn_data): New forward declaration.
(struct frchain): New member for ginsn data.
* gas/subsegs.c (subseg_set_rest): Initialize the new member.
* symbols.c (colon): Invoke ginsn_frob_label to convey
user-defined labels to ginsn infrastructure.
* ginsn.c: New file.
* ginsn.h: New file.
* scfi.c: New file.
* scfi.h: New file.
|
|
Define a new set of handlers for CFI directives for the purpose of SCFI.
The SCFI machinery ignores many of the user-specified CFI direcives when
SCFI is in effect. A warning ("Warning: SCFI ignores most
user-specified CFI directives") is issued once per file. The following
CFI directives, however, are not ignored:
- .cfi_sections
- .cfi_label
- .cfi_signal_frame
gas/
* Makefile.am: Add new files to GAS_CFILES and HFILES.
* Makefile.in: Likewise.
* gas/read.c (scfi_pop_insert): New define.
(pobegin): Use the SCFI handlers.
* scfidw2gen.c: New file.
* scfidw2gen.h: New file.
|
|
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
|
|
.nop and .nops generate code, not data. Hence them invoking
md_cons_align() is at best inappropriate. In fact it actually gets in
the of x86'es state maintenance involving i386_cons_align().
|
|
PR gas/30688
X_unsigned being clear does not indicate a negative number; it merely
indicates a signed one (whose sign may still be clear). Amend two uses
by an actual value check.
|
|
A number of backends want to return bfd_reloc_dangerous messaqes from
relocation special_function, and construct the message using asprintf.
Such messages are not freed anywhere, leading to small memory leaks
inside libbfd. To limit the leaks, I'd implemented a static buffer in
the ppc backends that was freed before use in asprintf output. This
patch extends that scheme to other backends using a shared static
buffer and goes further in freeing the buffer on any bfd_close.
The patch also fixes a few other cases where asprintf output was not
freed after use.
bfd/
* bfd.c (_input_error_msg): Make global and rename to..
(_bfd_error_buf): ..this.
(bfd_asprintf): New function.
(bfd_errmsg): Use bfd_asprintf.
* opncls.c (bfd_close_all_done): Free _buf_error_buf.
* elf32-arm.c (find_thumb_glue, find_arm_glue): Use bfd_asprintf.
* elf32-nios2.c (nios2_elf32_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_unhandled_reloc): Likewise.
* elf64-ppc.c (ppc64_elf_unhandled_reloc): Likewise.
* elfnn-riscv.c (riscv_resolve_pcrel_lo_relocs): Likewise.
(riscv_elf_relocate_section): Likewise.
* libbfd.h: Regenerate.
gas/
* read.c (read_end): Free current_name and current_label.
(do_s_func): Likewise on error path. strdup label.
ld/
* pe-dll.c (make_head, make_tail, make_one),
(make_singleton_name_thunk, make_import_fixup_entry),
(make_runtime_pseudo_reloc),
(pe_create_runtime_relocator_reference: Free oname after use.
|
|
There are two problems: symbol_equated_p() doesn't recognize equates of
registers, and S_CAN_BE_REDEFINED() goes by section rather than by
expression type. Both together undermine .eqv and .equiv clearly meaning
to guard the involved symbols against re-definition (both ways).
To compensate pseudo_set() now using O_symbol and S_CAN_BE_REDEFINED()
now checking for O_register,
- for targets creating register symbols through symbol_{new,create}() ->
symbol_init() -> S_SET_VALUE() (alpha, arc, dlx, ia64, m68k, mips,
mmix, tic4x, tic54x, plus anything using cgen or itbl-ops), have
symbol_init() set their expressions to O_register,
- x86'es parse_register() also can't go by section anymore when
trying to "look through" equates; probably symbol_equated_p() should
have been used there from the beginning, if only that had worked for
equates of registers,
- various targets need to "look through" equates when parsing insn
operands (which also helps transitive forward equates); perhaps even
more ought to, but many don't look to consider the possibility of
register equates in the first place.
This was uncovered by code reported in PR gas/30274 (duplicating
PR gas/30272), except that there .eqv was used when really .equ was
meant. Therefore that bug report is addressed here only in so far as
gas wouldn't crash anymore; the code there still won't assemble
successfully, just that now the issues there are properly diagnosed.
|
|
Yet again with the removal of gasp about 20 years ago this extra level
of indirection isn't necessary anymore either. Drop macro.c's local
variable and make as.c's global.
While doing the conversion, switch the variable to "bool".
|
|
Again with the removal of gasp about 20 years ago the extra level of
indirection isn't necessary anymore. Drop macro.c's local variable and
use the global flag directly.
|
|
* read.c (current_name, current_label, dwarf_file, dwarf_line): Move
to file scope.
(pobegin): Tidy pop_override_ok.
(read_a_source_file): Make last_eol an auto var.
(s_reloc): Constify bfd_relocs.
(read_begin): Init more variables.
|
|
This fixes a bug in .include and .incbin where given an absolute path
the -I dirs would be searched for the path.
* read.c (include_dir_count, include_dir_maxlen): Make them size_t.
(search_and_open): New function.
(s_incbin, s_include): Use search_and_open.
(init_include_dir): New function.
(add_include_dir): Don't set initial "." dir here.
* read.h (include_dir_count, include_dir_maxlen): Update.
(init_include_dir, search_and_open): Declare.
* as.c (gas_early_init): Call init_include_dir.
* config/tc-rx.c (rx_include): Avoid warning by using size_t.
* config/tc-tic54x.c (tic54x_set_default_include): Simplify and
use notes for include path.
(tic54x_mlib): Use search_and_open.
|
|
Also fix an error introduced in 1998 in reporting a zero count for
negative counts.
* read.c (s_space): Use unsigned multiply, and catch overflow.
Correct order of tests for invalid repeat counts. Ensure
ignored directives don't affect mri_pending_align.
|
|
Fix an internal error after "non-constant fill count for absolute
section".
* read.c (s_fill): Don't create frags after errors.
|
|
* read.c (do_repeat): Free sb on error path.
|
|
read_a_source_file() would bump line numbers only when seeing a newline,
whereas is_end_of_line[] indicates further end-of-line characters, in
particular the nul character. s_linefile() attempts to compensate for
the bump, but was too aggressive with this so far: It should only adjust
when a newline ends the line. To facilitate such a check, the check for
nothing else on the line needs to move ahead, which luckily is easily
possible: The relevant two conditions match, and the function can
simply return from the body of that earlier instance of the conditional.
The more strict treatment in s_linefile() then requires an adjustment
to buffer_and_nest()'s invocation of the function: The line terminator
now needs to be a newline, not nul.
|
|
Move all the function local static state variables to file scope,
in order to tidy memory on exit and to reinit everything for that
annoying oss-fuzz. Also fix a couple memory leaks.
* read.h (read_begin, read_end): Declare.
* read.c (read_begin): Call stabs_begin.
(read_end): Call stabs_end.
* stabs.c (stabs_begin, stabs_end): New functions.
(in_dot_func_p): Delete, use current_function_label instead.
(cached_sec): Move from s_stab_generic.
(last_asm_file, file_label_count): Move from generate_asm_file.
(line_label_count, prev_lineno, prev_line_file): Move from
stabs_generate_asm_lineno.
(void_emitted_p): Move from stabs_generate_asm_func.
(endfunc_label_count): Move from stabs_generate_asm_endfunc.
(stabs_generate_asm_lineno): Simplify setting of
prev_line_file.
(stabs_generate_asm_func): Don't leak current_function_label.
(stabs_generate_asm_endfunc): Likewise.
|
|
This tidies memory allocated for entries in macro_hash. Freeing the
macro name requires a little restructuring of the define_macro
interface due to the name being used in the error message, and exposed
the fact that the name and other fields were not initialised by the
iq2000 backend.
There is also a fix for
.macro .macro
.endm
.macro .macro
.endm
which prior to this patch reported
mac.s:1: Warning: attempt to redefine pseudo-op `.macro' ignored
mac.s:3: Error: Macro `.macro' was already defined
rather than reporting the attempt to redefine twice.
* macro.c (macro_del_f): New function.
(macro_init): Use it when creating macro_hash.
(free_macro): Free macro name too.
(define_macro): Return the macro_entry, remove idx, file, line and
namep params. Call as_where. Report errors here. Delete macro
from macro_hash on attempt to redefined pseudo-op.
(delete_macro): Don't call free_macro.
* macro.h (define_macro): Update prototype.
* read.c (s_macro): Adjust to suit.
* config/tc-iq2000.c (iq2000_add_macro): Init all fields of
macro_entry.
|
|
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
|
|
Not so long ago we started to insert these artificially when expanding
certain macro-like constructs; zap them as cluttering what actually
results from user input.
|
|
|
|
PR 29447
* read.c (read_symbol_name): Pass 0 as the length parameter when
invoking mbstowc in order to check the validity of a wide string.
|
|
These two macros print either a 16 digit hex number or an 8 digit
hex number. Unfortunately they depend on both target and host, which
means that the output for 32-bit targets may be either 8 or 16 hex
digits.
Replace them in most cases with code that prints a bfd_vma using
PRIx64. In some cases, deliberately lose the leading zeros.
This change some output, notably in base/offset fields of m68k
disassembly which I think looks better that way, and in error
messages. I've kept leading zeros in symbol dumps (objdump -t)
and in PE header dumps.
bfd/
* bfd-in.h (fprintf_vma, sprintf_vma, printf_vma): Delete.
* bfd-in2.h: Regenerate.
* bfd.c (bfd_sprintf_vma): Don't use sprintf_vma.
(bfd_fprintf_vma): Don't use fprintf_vma.
* coff-rs6000.c (xcoff_reloc_type_tls): Don't use sprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(xcoff_ppc_relocate_section): Likewise.
* cofflink.c (_bfd_coff_write_global_sym): Likewise.
* mmo.c (mmo_write_symbols_and_terminator): Likewise.
* srec.c (srec_write_symbols): Likewise.
* elf32-xtensa.c (print_r_reloc): Similarly for fprintf_vma.
* pei-x86_64.c (pex64_dump_xdata): Likewise.
(pex64_bfd_print_pdata_section): Likewise.
* som.c (som_print_symbol): Likewise.
* ecoff.c (_bfd_ecoff_print_symbol): Use bfd_fprintf_vma.
opcodes/
* dis-buf.c (perror_memory, generic_print_address): Don't use
sprintf_vma. Instead use PRIx64 to print bfd_vma values.
* i386-dis.c (print_operand_value, print_displacement): Likewise.
* m68k-dis.c (print_base, print_indexed): Likewise.
* ns32k-dis.c (print_insn_arg): Likewise.
* ia64-gen.c (_opcode_int64_low, _opcode_int64_high): Delete.
(opcode_fprintf_vma): Delete.
(print_main_table): Use PRIx64 to print opcode.
binutils/
* od-macho.c: Replace all uses of printf_vma with bfd_printf_vma.
* objcopy.c (copy_object): Don't use sprintf_vma. Instead use
PRIx64 to print bfd_vma values.
(copy_main): Likewise.
* readelf.c (CHECK_ENTSIZE_VALUES): Likewise.
(dynamic_section_mips_val): Likewise.
(print_vma): Don't use printf_vma. Instead use PRIx64 to print
bfd_vma values.
(dump_ia64_vms_dynamic_fixups): Likewise.
(process_version_sections): Likewise.
* rddbg.c (stab_context): Likewise.
gas/
* config/tc-i386.c (offset_in_range): Don't use sprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(md_assemble): Likewise.
* config/tc-mips.c (load_register, macro): Likewise.
* messages.c (as_internal_value_out_of_range): Likewise.
* read.c (emit_expr_with_reloc): Likewise.
* config/tc-ia64.c (note_register_values): Don't use fprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(print_dependency): Likewise.
* listing.c (list_symbol_table): Use bfd_sprintf_vma.
* symbols.c (print_symbol_value_1): Use %p to print pointers.
(print_binary): Likewise.
(print_expr_1): Use PRIx64 to print bfd_vma values.
* write.c (print_fixup): Use %p to print pointers. Don't use
fprintf_vma.
* testsuite/gas/all/overflow.l: Update expected output.
* testsuite/gas/m68k/mcf-mov3q.d: Likewise.
* testsuite/gas/m68k/operands.d: Likewise.
* testsuite/gas/s12z/truncated.d: Likewise.
ld/
* deffilep.y (def_file_print): Don't use fprintf_vma. Instead
use PRIx64 to print bfd_vma values.
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Don't use
sprintf_vma. Instead use PRIx64 to print bfd_vma values.
* emultempl/pe.em (gld${EMULATION_NAME}_finish): Likewise.
* ldlang.c (lang_map): Use %V to print region origin.
(lang_one_common): Don't use sprintf_vma.
* ldmisc.c (vfinfo): Don't use fprintf_vma or sprintf_vma.
* pe-dll.c (pe_dll_generate_def_file): Likewise.
gdb/
* remote.c (remote_target::trace_set_readonly_regions): Replace
uses of sprintf_vma with bfd_sprintf_vma.
|
|
Allows register names to appear in symbol assignments, so for example
tocp = %r2
mr %r3,tocp
now assembles.
* gas/config/tc-ppc.c (REG_NAME_CNT): Delete, replace uses with
ARRAY_SIZE.
(register_name): Rename to..
(md_operand): ..this. Only handle %reg.
(cr_names): Rename to..
(cr_cond): ..this. Just keep conditions.
(ppc_parse_name): Add mode param. Search both cr_cond and
pre_defined_registers. Handle absolute and register symbol
values here rather than in expr.c:operand().
(md_assemble): Don't special case register name matching in
operands, except to set cr_operand as appropriate.
* gas/config/tc-ppc.h (md_operand): Don't define.
(md_parse_name, ppc_parse_name): Update.
* read.c (pseudo_set): Copy over entire O_register value.
* testsuite/gas/ppc/regsyms.d.
* testsuite/gas/ppc/regsyms.s: New test.
* testsuite/gas/ppc/ppc.exp: Run it.
|
|
So that the notes obstack can be used for persistent storage in
parse_args.
* as.c (parse_args): Use notes_alloc and notes_strdup.
(free_notes): New function.
(main): Init notes obstack, and arrange to be freed on exit.
* read.c (read_begin): Don't init notes obstack.
(read_end): Free cond_obstack.
* subsegs.c (subsegs_end): Don't free cond_obstack or notes.
|
|
* macro.c (macro_end): New function.
* macro.h (macro_end): Declare.
* read.c (read_end, poend): New functions.
* read.h (read_end): Declare.
* symbols.c (symbol_end): New function.
* symbols.h (symbol_end): Declare.
* output-file.c (output_file_close): Call new *_end functions.
|
|
* read.c (assign_symbol): Use notes_calloc for dummy_frag.
|
|
* read.c (s_include): Use notes obstack for path mem.
|
|
po_hash code duplicates the str_hash code in hash.h for no good reason.
* read.c (struct po_entry, po_entry_t): Delete.
(hash_po_entry, eq_po_entry, po_entry_alloc, po_entry_find): Delete.
(pop_insert): Use str_hash_insert.
(pobegin): Use str_htab_create.
(read_a_source_file, s_macro): Use str_hash_find.
|
|
read_symbol_name mallocs the string it returns. Free it when done.
* read.c (read_symbol_name): Free name on error path.
* config/tc-ppc.c (ppc_GNU_visibility): Free name returned from
read_symbol_name.
(ppc_extern, ppc_globl, ppc_weak): Likewise.
|
|
This fixes some horrible code using do_scrub_chars. What we had ran
text through do_scrub_chars twice, directly in read_a_source_file and
again via the input_scrub_include_sb call. That's silly, and since
do_scrub_chars is a state machine, possibly wrong. More silliness is
evident in the temporary malloc'd buffer for do_scrub_chars output,
which should have been written directly to sbuf.
So, get rid of the do_scrub_chars call and support functions, leaving
scrubbing to input_scrub_include_sb. I did wonder about #NO_APP
overlapping input_scrub_next_buffer buffers, but that should only
happen if the string starts in one file and finishes in another.
* read.c (scrub_string, scrub_string_end): Delete.
(scrub_from_string): Delete.
(read_a_source_file): Rewrite #APP processing.
|
|
Compilers would put decimal numbers there, so I think we should treat
finding octal numbers the same as finding bignums - ignore them as
actually being comments of some very specific form.
|
|
Any construct which to the scrubber looks like a C preprocessor
line/file "directive" is converted to .linefile, but the amount of
checking the scrubber does is minimal (albeit it does let through only
decimal digits for the line part of the contruct). Since the scrubber
conversion is further tied to # being a line comment character, anything
which upon closer inspection turns out not to be a line/file "directive"
is supposed to be treated as a comment, i.e. ignored. Therefore we
cannot use get_absolute_expression(), as this may raise errors. Open-
code the function instead, treating everything not resulting in
O_constant as a comment as well.
Furthermore also bounds-check the parsed value. This bounds check tries
to avoid implementation defined behavior (which may be the raising of an
implementation defined signal), but for now makes the assumption that
int has less than 64 bits. The way bfd_signed_vma (which is what offsetT
aliases) is defined in bfd.h for the BFD64 case I cannot really see a
clean way of avoiding this assumption. Omitting the #ifdef, otoh, would
risk "condition is always false" warnings by compilers.
Convert get_linefile_number() to return bool at this occasion as well.
|
|
do_repeat_with_expander() already deals with the "no expander" case
quite fine, so there's really little point having two functions. What it
lacks compared with do_repeat() is a call to sb_build(), which can
simply be moved (and the then redundant sb_new() be avoided). Along with
this moving also flip if the main if()'s condition such that the "no
expander" case is handled first.
|
|
These were used originally to represent "# <line> <file>" constructs
inserted by (typically) compilers when pre-processing. Quite some time
ago they were replaced by .linefile though. Since the original
directives were never documented, we ought to be able to remove support
for them. As a result in a number of case function parameter aren't used
anymore and can hence be dropped.
|
|
Commit 7992631e8c0b ("gas/Dwarf: improve debug info generation from .irp
and alike blocks"), while dealing okay with actual assembly source files
not using .file/.line and alike outside but not inside of .macro, has
undue effects when the logical file/line pair was already overridden:
Line numbers would continuously increment while processing the expanded
macro, while the goal of the PR gas/16908 workaround is to keep the
expansion associated with the line invoking the macro. However, as soon
as enough state was overridden _inside_ the macro to cause as_where() to
no longer fall back top as_where_physical(), honor this by resuming the
bumping of the logical line number.
Note that from_sb_is_expansion's initializer was 1 for an unknown
reason. While renaming the variable and changing its type, also change
the initializer to "expanding_none", which would have been "0" in the
original code. Originally the initializer value itself wasn't ever used
anyway (requiring sb_index != -1), as it necessarily had changed in
input_scrub_include_sb() alongside setting sb_index to other than -1.
Strictly speaking input_scrub_insert_line() perhaps shouldn't use
expanding_none, yet none of the other enumerators fit there either. And
then strictly speaking that function probably shouldn't exist in the
first place. It's used only by tic54x.
|
|
Commit 7992631e8c0b ("gas/Dwarf: improve debug info generation from .irp
and alike blocks"), while dealing okay with actual assembly source files
not using .file/.line and alike outside but not inside of .irp et al,
has undue effects when the logical file/line pair was already
overridden: Line numbers would continuously increment upon every
iteration, thus potentially getting far off. Furthermore it left it to
the user to actually insert .file/.line inside such constructs. Note
though that before aforementioned change things weren't pretty either:
Diagnostics (and debug info) would be associated with the directive
terminating the iteration construct, rather than with the actual lines.
Handle this automatically by simply latching the present line and then
re-instating coordinates first thing on every iteration; note that the
file can't change from what was previously pushed on the scrubber's
state stack, and hence can be taken from there by using a new flavor of
.linefile (which is far better memory-footprint-wise than recording the
full path in the inserted directive). (This then leaves undisturbed any
file/line control occurring in the body of the construct, as these will
only be seen and processed afterwards.)
|
|
The change in read_a_source_file prevents the particular testcase in
the PR from triggering the assertion in demand_empty_rest_of_line.
I've also removed the assertion. Nothing much goes wrong with gas if
something else triggers it, so it's not worthy of an abort.
I've also changed my previous patch to ignore_rest_of_line to allow
that function to increment input_line_pointer past buffer_limit, like
demand_empty_rest_of_line: The two functions ought to behave the
same in that respect. Finally, demand_empty_rest_of_line gets a
little hardening to prevent accesses past buffer_limit plus one.
PR 28979
* read.c (read_a_source_file): Calculate known size for sbuf
rather than calling strlen.
(demand_empty_rest_of_line): Remove "know" check. Expand comment.
Don't dereference input_line_pointer when past buffer_limit.
(ignore_rest_of_line): Allow input_line_pointer to increment to
buffer_limit plus one. Expand comment.
|
|
operand() is not a place that should be calling ignore_rest_of_line.
ignore_rest_of_line shouldn't increment input_line_pointer if already
at buffer limit.
* expr.c (operand): Don't call ignore_rest_of_line.
* read.c (s_mri_common): Likewise.
(ignore_rest_of_line): Don't increment input_line_pointer if
already at buffer_limit.
|
|
Much of the gas source and older BFD source use "long" for function
parameters and variables, when other types would be more appropriate.
This patch fixes one of those cases. Dollar labels and numeric local
labels do not need large numbers. Small positive itegers are usually
all that is required. Due to allowing longs, it was possible for
fb_label_name and dollar_label_name to overflow their buffers.
* symbols.c: Delete unnecessary forward declarations.
(dollar_labels, dollar_label_instances): Use unsigned int.
(dollar_label_defined, dollar_label_instance): Likewise.
(define_dollar_label): Likewise.
(fb_low_counter, fb_labels, fb_label_instances): Likewise.
(fb_label_instance_inc, fb_label_instance): Likewise.
(fb_label_count, fb_label_max): Make them size_t.
(dollar_label_name, fb_label_name): Rewrite using sprintf.
* symbols.h (dollar_label_defined): Update prototype.
(define_dollar_label, dollar_label_name): Likewise.
(fb_label_instance_inc, fb_label_name): Likewise.
* config/bfin-lex.l (yylex): Remove unnecessary casts.
* expr.c (integer_constant): Likewise.
* read.c (read_a_source_file): Limit numeric label range to int.
|
|
There are quite a few ubsan warnings in gas. This one disappears with
a code tidy.
* read.c (s_app_line): Rename 'l' to 'linenum'. Avoid ubsan
warning.
|
|
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
|
|
Squash another totally useless fuzz report that I should have ignored.
* read.c (next_char_of_string): Avoid integer overflow.
|
|
Unlike the forms consuming/producing integer data, the floating point
ones so far required the 2nd argument to be present, contrary to
documentation. To avoid code duplication, split float_length() out of
hex_float() (taking the opportunity to adjust error message wording).
|
|
This is to be able to generate data acted upon by AVX512-BF16 and
AMX-BF16 insns. While not part of the IEEE standard, the format is
sufficiently standardized to warrant handling in config/atof-ieee.c.
Arm, where custom handling was implemented, may want to leverage this as
well. To be able to also use the hex forms supported for other floating
point formats, a small addition to the generic hex_float() is needed.
Extend existing x86 testcases.
|
|
This is to be able to generate data passed to {,V}CVTPH2PS and acted
upon by AVX512-FP16 insns. To be able to also use the hex forms
supported for other floating point formats, a small addition to the
generic hex_float() is needed.
Extend existing x86 testcases.
|
|
The ELF psABI-s are quite clear here: On 32-bit the data type is 12
bytes long (with 2 bytes of trailing padding), while on 64-bit it is 16
bytes long (with 6 bytes of padding). Make hex_float() capable of
handling such padding.
Note that this brings the emitted data size of .dc.x / .dcb.x in line
also for non-ELF targets; so far they were different depending on input
format (dec vs hex).
Extend the existing x86 testcases.
|
|
The ELF psABI-s are quite clear here: On 32-bit the underlying data type
is 12 bytes long (with 2 bytes of trailing padding), while on 64-bit it
is 16 bytes long (with 6 bytes of padding). Make s_space() capable of
handling 'x' (and 'p') type floating point being other than 12 bytes
wide (also adjusting documentation). This requires duplicating the
definition of X_PRECISION in the target speciifc header; the compiler
would complain if this was out of sync with config/atof-ieee.c.
Note that for now padding space doesn't get separated from actual
storage, which means that things will work correctly only for little-
endian cases, and which also means that by specifying large enough
numbers padding space can be set to non-zero. Since the logic is needed
for a single little-endian architecture only for now, I'm hoping that
this might be acceptable for the time being; otherwise the change will
become more intrusive.
Note also that this brings the emitted data size of .ds.x vs .tfloat in
line for non-ELF targets as well; the issue will be even more obvious
when further taking into account a subsequent patch fixing .dc.x/.dcb.x
(where output sizes currently differ depending on input format).
Extend existing x86 testcases.
|
|
of a string.
PR 28051
gas * config/tc-i386.c (offset_in_range): Reformat error messages in
order to fix problems when translating.
(md_assemble): Likewise.
* messages.c (as_internal_value_out_of_range): Likewise.
* read.c (emit_expr_with_reloc): Likewise.
* testsuite/gas/all/overflow.l Change expected output format.
* po/gas.pot: Regenerate.
bfd * coff-rs6000.c (xcoff_reloc_type_tls): Reformat error messages in
order to fix problems when translating.
* cofflink.c (_bfd_coff_write_global_sym): Likewise.
* elfnn-aarch64.c (_bfd_aarch64_erratum_843419_branch_to_stub):
Likewise.
* po/bfd.pot: Regenerate.
|
