aboutsummaryrefslogtreecommitdiff
path: root/gas/po
AgeCommit message (Collapse)AuthorFilesLines
2021-08-11Deprecate a.out support for NetBSD targets.John Ericson1-1697/+1686
As discussed previously, a.out support is now quite deprecated, and in some cases removed, in both Binutils itself and NetBSD, so this legacy default makes little sense. `netbsdelf*` and `netbsdaout*` still work allowing the user to be explicit about there choice. Additionally, the configure script warns about the change as Nick Clifton requested. One possible concern was the status of NetBSD on NS32K, where only a.out was supported. But per [1] NetBSD has removed support, and if it were to come back, it would be with ELF. The binutils implementation is therefore marked obsolete, per the instructions in the last message. With that patch and this one applied, I have confirmed the following: --target=i686-unknown-netbsd --target=i686-unknown-netbsdelf builds completely --target=i686-unknown-netbsdaout properly fails because target is deprecated. --target=vax-unknown-netbsdaout builds completely except for gas, where the target is deprecated. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html --- bfd/config.bfd | 43 +++++++++++++-------- bfd/configure.ac | 5 +-- binutils/testsuite/binutils-all/nm.exp | 2 +- binutils/testsuite/lib/binutils-common.exp | 7 +--- config/picflag.m4 | 4 +- gas/configure.tgt | 9 +++-- gas/testsuite/gas/arm/blx-bl-convert.d | 2 +- gas/testsuite/gas/arm/blx-local-thumb.d | 2 +- gas/testsuite/gas/sh/basic.exp | 2 +- gdb/configure.host | 34 +++++++---------- gdb/configure.tgt | 2 +- gdb/testsuite/gdb.asm/asm-source.exp | 6 +-- intl/configure | 2 +- ld/configure.tgt | 44 +++++++++++----------- ld/testsuite/ld-arm/arm-elf.exp | 4 +- ld/testsuite/ld-elf/elf.exp | 2 +- ld/testsuite/ld-elf/shared.exp | 4 +- libiberty/configure | 4 +-
2021-08-10Updated Serbian and Russian translations for various sub-directoriesNick Clifton1-4241/+4326
2021-07-07Fix problems translating messages when a percentage sign appears at the end ↵Nick Clifton1-296/+300
of a string. PR 28051 gas * config/tc-i386.c (offset_in_range): Reformat error messages in order to fix problems when translating. (md_assemble): Likewise. * messages.c (as_internal_value_out_of_range): Likewise. * read.c (emit_expr_with_reloc): Likewise. * testsuite/gas/all/overflow.l Change expected output format. * po/gas.pot: Regenerate. bfd * coff-rs6000.c (xcoff_reloc_type_tls): Reformat error messages in order to fix problems when translating. * cofflink.c (_bfd_coff_write_global_sym): Likewise. * elfnn-aarch64.c (_bfd_aarch64_erratum_843419_branch_to_stub): Likewise. * po/bfd.pot: Regenerate.
2021-07-05Updated translations (mainly Ukranian and French) triggered by creation of ↵Nick Clifton2-5658/+5824
2.37 branch.
2021-07-03Update version number and regenerate filesNick Clifton1-2790/+2841
2021-02-24PR23691, gas .y files vs. automatic make dependenciesAlan Modra1-0/+1
A number of targets, bfin, rl78, rx, can show odd failures when bfd/reloc.c changes BFD_RELOC_* enum values, if recompiling over a build dir with existing objects. The problem is caused by bfin-parse.o and similar not being recompiled and so using stale BFD_RELOC_* values. This isn't fixed by making bfin-parse.c depend on bfd/reloc.c, which isn't necessary anyway. bfin-parse.o should have been recompiled due to bfd/bfd.h changing when extracted bfd/reloc.c BFD_RELOC_* values change, but that wasn't happening. The problem is that automake generates a makefile that loads gas/config/.deps/ dependency file for objects with corresponding sources mentioned in EXTRA_as_new_SOURCES. Unless we want to mess around generating explicit dependencies, I think that mean moving some object files to the build gas/config/. This patch does that, removing some hacks for m68k-parse.c that should no longer be necessary, and removes some rules that catered to old bison producing code that triggers compiler warnings. PR 23691 * Makefile.am (TARGET_CPU_CFILES): Split off config/xtensa-relax.c.. (TARGET_CPU_HFILES): ..and config/xtensa-relax.h.. (TARGET_EXTRA_FILES): ..to here. Add config/bfin-lex-wrapper.c, and use alongside TARGET_CPU_CFILES. (EXTRA_DIST): Update location of generated .c files. (config/m68k-parse.c): New rule replacing m68k-parse.c rule. (config/bfin-parse.c, config/rl78-parse.cm config/rx-parse.c), (config/bfin-lex.c, config/bfin-lex-wrapper.@OBJEXT@): Similarly. (itbl-lex-wrapper.@OBJEXT@): Simplify to just the needed dependencies. (itbl-parse.@OBJEXT@): Delete rule using NO_WERROR. (itbl-parse.c, itbl-parse.h): Tidy. * config/bfin-lex-wrapper.c: Include config/bfin-lex.c. * config/bfin-lex.l: Include config/bfin-parse.h. * configure.ac (extra_objects): Move object files corresponding to .y and .l files now in config/ to config/. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2021-02-09Remove arm-symbianelfAlan Modra1-1/+0
* configure.ac: Delete arm*-*-symbianelf* entry. * configure: Regenerate. bfd/ * config.bfd (arm*-*-symbianelf*): Move from obsolete to removed. * configure.ac: Delete symbian entries. * elf-bfd.h (enum elf_target_os): Delete is_symbian. * elf32-arm.c: Remove symbian support. Formatting. * targets.c: Delete symbian entries. * configure: Regenerate. binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Remove symbianelf. gas/ * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN support. * config/te-symbian.h: Delete. * configure.tgt: Remove arm-*-symbianelf*. * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in target selection. * testsuite/gas/arm/arch4t.d: Likewise. * testsuite/gas/arm/got_prel.d: Likewise. * testsuite/gas/arm/mapdir.d: Likewise. * testsuite/gas/arm/mapmisc.d: Likewise. * testsuite/gas/arm/mapsecs.d: Likewise. * testsuite/gas/arm/mapshort-eabi.d: Likewise. * testsuite/gas/arm/thumb-eabi.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumbrel.d: Likewise. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove earmsymbian.c. Don't include symbian dep file. * configure.tgt: Remove arm*-*-symbianelf* entry. * emulparams/armsymbian.sh: Delete. * ld.texi: Don't mention symbian. * scripttempl/armbpabi.sc: Delete. * testsuite/ld-arm/symbian-seg1.d: Delete. * testsuite/ld-arm/symbian-seg1.s: Delete. * testsuite/ld-arm/arm-elf.exp: Don't run symbian-seg1. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2021-01-12Updated translations for some subdirectoriesNick Clifton1-3617/+3622
2021-01-11Updated translations for multiple subdirectoriesNick Clifton1-3616/+3621
2021-01-09Change version number to 2.36.50 and regenerate filesNick Clifton1-1055/+1076
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-10-22Fix printf formatting errors where "0x" is used as a prefix for a decimal ↵Dr. David Alan Gilbert1-3521/+3342
number. bfd * po/es.po: Fix printf format binutils * windmc.c: Fix printf format gas * config/tc-arc.c: Fix printf format opcodes * po/es.po: Fix printf format sim * arm/armos.c: Fix printf format * ppc/emul_netbsd.c: Fix printf format -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
2020-08-12Updated Serbian and Russian translations for various sub-directoriesNick Clifton1-2248/+2642
2020-07-13Updated French translation for the gas/ and binutils/ sub-directoriesNick Clifton1-2261/+2645
2020-07-06Fix spelling mistakes in some of the binutils sub-directories.Nick Clifton1-6/+6
PR 26204 gas * config/tc-arm.c: Fix spelling mistake. * config/tc-riscv.c: Likewise. * config/tc-z80.c: Likewise. * po/gas.pot: Regenerate. ld * lexsup.c: Fix spelling mistake. * po/ld.pot: Regenerate. opcodes * arc-dis.c: Fix spelling mistake. * po/opcodes.pot: Regenerate.
2020-07-06Updated translations for various binutils sub-directoriesNick Clifton1-2255/+2643
2020-07-04Update version to 2.35.50 and regenerate filesNick Clifton1-1571/+1587
2020-05-20[PATCH v2 0/9] RISC-V: Support version controling for ISA standard ↵Nelson Chu1-2010/+2350
extensions and CSR 1. Remove the -mriscv-isa-version and --with-riscv-isa-version options. We can still use -march to choose the version for each extensions, so there is no need to add these. 2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...]. Unlike the architecture string has specified by spec, ther is no need to do the same thing for options. 3. Spilt the patches to reduce the burdens of review. [PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions to [PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions [PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default. [PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version. to [PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version. [PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version. 4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c. The behavior is same as comparing the choosen privilege spec. include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean. (enum riscv_isa_spec_class): New enum class. All supported ISA spec belong to one of the class (struct riscv_ext_version): New structure holds version information for the specific ISA. * opcode/riscv-opc.h (DECLARE_CSR): There are two version information, define_version and abort_version. The define_version means which privilege spec is started to define the CSR, and the abort_version means which privilege spec is started to abort the CSR. If the CSR is valid for the newest spec, then the abort_version should be PRIV_SPEC_CLASS_DRAFT. (DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR. * opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define the current supported privilege spec versions. (struct riscv_csr_extra): Add new fields to store more information about the CSR. We use these information to find the suitable CSR address when user choosing a specific privilege spec. binutils * dwarf.c: Updated since DECLARE_CSR is changed. opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store all information about the supported spec and the corresponding ISA versions. Currently, only Zicsr is supported to verify the correctness of Z sub extension settings. Others will be supported in the future patches. (struct isa_spec_t, isa_specs): List for all supported ISA spec classes and the corresponding strings. (riscv_get_isa_spec_class): New function. Get the corresponding ISA spec class by giving a ISA spec string. * riscv-opc.c (struct priv_spec_t): New structure. (struct priv_spec_t priv_specs): List for all supported privilege spec classes and the corresponding strings. (riscv_get_priv_spec_class): New function. Get the corresponding privilege spec class by giving a spec string. (riscv_get_priv_spec_name): New function. Get the corresponding privilege spec string by giving a CSR version class. * riscv-dis.c: Updated since DECLARE_CSR is changed. * riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR according to the chosen version. Build a hash table riscv_csr_hash to store the valid CSR for the chosen pirv verison. Dump the direct CSR address rather than it's name if it is invalid. (parse_riscv_dis_option_without_args): New function. Parse the options without arguments. (parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to parse the options without arguments first, and then handle the options with arguments. Add the new option -Mpriv-spec, which has argument. * riscv-dis.c (print_riscv_disassembler_options): Add description about the new OBJDUMP option. ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated priv attributes according to the -mpriv-spec option. * testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise. bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function get_default_version. It is used to find the default version for the specific extension. * elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters default_major_version and default_minor_version. Add new bfd_boolean parameter *use_default_version. Set it to TRUE if we need to call the callback rps->get_default_version to find the default version. (riscv_parse_std_ext): Call rps->get_default_version if we fail to find the default version in riscv_parsing_subset_version, and then call riscv_add_subset to add the subset into subset list. (riscv_parse_prefixed_ext): Likewise. (riscv_std_z_ext_strtab): Support Zicsr extensions. * elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the strings rather than characters. riscv_merge_arch_attr_info): The callback function get_default_version is only needed for assembler, so set it to NULL int the linker. * elfxx-riscv.c (riscv_estimate_digit): Remove the static. * elfxx-riscv.h: Updated. gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated. * config/tc-riscv.c (default_arch_with_ext, default_isa_spec): Static variables which are used to set the ISA extensions. You can use -march (or ELF build attributes) and -misa-spec to set them, respectively. (ext_version_hash): The hash table used to handle the extensions with versions. (init_ext_version_hash): Initialize the ext_version_hash according to riscv_ext_version_table. (riscv_get_default_ext_version): The callback function of riscv_parse_subset_t. According to the choosed ISA spec, get the default version for the specific extension. (riscv_set_arch): Set the callback function. (enum options, struct option md_longopts): Add new option -misa-spec. (md_parse_option): Do not call riscv_set_arch for -march. We will call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class to set default_isa_spec class. (riscv_after_parse_args): Call init_ext_version_hash to initialize the ext_version_hash, and then call riscv_set_arch to set the architecture with versions according to default_arch_with_ext. * testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for x extensions. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we already set it's version to 2p1 by march, so no need to use the default 2p2 version. For m-ext, we do not set the version by -march and ELF arch attribute, so set the default 2p0 to it. For zicsr, it is not defined in ISA spec 2p2, so set 0p0 to it. * testsuite/gas/riscv/attribute-10.d: New testcase. The version of zicsr is 2p0 according to ISA spec 20191213. * config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT) (DEFAULT_RISCV_ISA_SPEC): Default configure option settings. You can set them by configure options --with-arch and --with-isa-spec, respectively. (riscv_set_default_isa_spec): New function used to set the default ISA spec. (md_parse_option): Call riscv_set_default_isa_spec rather than call riscv_get_isa_spec_class directly. (riscv_after_parse_args): If the -isa-spec is not set, then we set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by calling riscv_set_default_isa_spec. * testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since the --with-isa-spec may be set to different ISA spec. * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * configure.ac: Add configure options, --with-arch and --with-isa-spec. * configure: Regenerated. * config.in: Regenerated. * config/tc-riscv.c (default_priv_spec): Static variable which is used to check if the CSR is valid for the chosen privilege spec. You can use -mpriv-spec to set it. (enum reg_class): We now get the CSR address from csr_extra_hash rather than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX. (riscv_init_csr_hashes): Only need to initialize one hash table csr_extra_hash. (riscv_csr_class_check): Change the return type to void. Don't check the ISA dependency if -mcsr-check isn't set. (riscv_csr_version_check): New function. Check and find the CSR address from csr_extra_hash, according to default_priv_spec. Report warning for the invalid CSR if -mcsr-check is set. (reg_csr_lookup_internal): Updated. (reg_lookup_internal): Likewise. (md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed. (enum options, struct option md_longopts): Add new GAS option -mpriv-spec. (md_parse_option): Call riscv_set_default_priv_version to set default_priv_spec. (riscv_after_parse_args): If -mpriv-spec isn't set, then set the default privilege spec to the newest one. (enum riscv_csr_class, struct riscv_csr_extra): Move them to include/opcode/riscv.h. * testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want to check the ISA dependency for CSR, so fix the spec version by adding -mpriv-spec=1.11. * testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some version warnings for the test case. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case. Check whether the CSR is valid when privilege version 1.9 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case. Check whether the CSR is valid when privilege version 1.9.1 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case. Check whether the CSR is valid when privilege version 1.10 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case. Check whether the CSR is valid when privilege version 1.11 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise. * config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option setting. You can set it by configure option --with-priv-spec. (riscv_set_default_priv_spec): New function used to set the default privilege spec. (md_parse_option): Call riscv_set_default_priv_spec rather than call riscv_get_priv_spec_class directly. (riscv_after_parse_args): If -mpriv-spec isn't set, then we set the default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by calling riscv_set_default_priv_spec. * testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since the --with-priv-spec may be set to different privilege spec. * testsuite/gas/riscv/priv-reg.d: Likewise. * configure.ac: Add configure option --with-priv-spec. * configure: Regenerated. * config.in: Regenerated. * config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to explicit_attr. Set it to TRUE if any ELF attribute is found. (riscv_set_default_priv_spec): Try to set the default_priv_spec if the priv attributes are set. (md_assemble): Set the default_priv_spec according to the priv attributes when we start to assemble instruction. (riscv_write_out_attrs): Rename riscv_write_out_arch_attr to riscv_write_out_attrs. Update the arch and priv attributes. If we don't set the corresponding ELF attributes, then try to output the default ones. (riscv_set_public_attributes): If any ELF attribute or -march-attr options is set (explicit_attr is TRUE), then call riscv_write_out_attrs to update the arch and priv attributes. (s_riscv_attribute): Make sure all arch and priv attributes are set before any instruction. * testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any ELF attribute or -march-attr is set. If the priv attributes are not set, then try to update them by the default setting (-mpriv-spec or --with-priv-spec). * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-09.d: Likewise. * testsuite/gas/riscv/attribute-10.d: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec set by priv attributes must be supported. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated priv attributes according to the -mpriv-spec option. * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise. * testsuite/gas/riscv/priv-reg.d: Removed. * testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the CSR according to the priv spec 1.9. * testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the CSR according to the priv spec 1.9.1. * testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the CSR according to the priv spec 1.10. * testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the CSR according to the priv spec 1.11. * config/tc-riscv.c (md_show_usage): Add descriptions about the new GAS options. * doc/c-riscv.texi: Likewise.
2020-05-14Update Swedish translation for the gas sub-directory and a new Serbian ↵Nick Clifton1-390/+231
translation for the gold sub-directory.
2020-05-06Updated Swedish translation for the gas sub-directoryNick Clifton1-3004/+4046
2020-01-31Updated translations for some of the binutils sub-directoriesNick Clifton2-6008/+7785
2020-01-20Updated translations for various binutils sub-directoriesNick Clifton1-3001/+3882
2020-01-18Update version to 2.34.50. Regenerate configure and .pot files.Nick Clifton1-462/+467
2020-01-03Updated Swedish translation for the GAS subdirectory.Nick Clifton1-408/+181
2020-01-02Add support for the GBZ80, Z180, and eZ80 variants of the Z80 architecure. ↵Sergey Belyashov1-2885/+3667
Add an ELF based target for these as well. PR 25224 bfd * Makefile.am: Add z80-elf target support. * configure.ac: Likewise. * targets.c: Likewise. * config.bfd: Add z80-elf target support and new arches: ez80 and z180. * elf32-z80.c: New file. * archures.c: Add new z80 architectures: eZ80 and Z180. * coffcode.h: Likewise. * cpu-z80.c: Likewise. * bfd-in2.h: Likewise plus additional Z80 relocations. * coff-z80.c: Add new relocations for Z80 target and local label check. gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support for assembler code generated by SDCC. Add new relocation types. Add z80-elf target support. * config/tc-z80.h: Add z80-elf target support. Enable dollar local labels. Local labels starts from ".L". * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict. * testsuite/gas/all/fwdexp.s: Likewise. * testsuite/gas/z80/suffix.d: Fix failure on ELF target. * testsuite/gas/z80/z80.exp: Add new tests * testsuite/gas/z80/dollar.d: New file. * testsuite/gas/z80/dollar.s: New file. * testsuite/gas/z80/ez80_adl_all.d: New file. * testsuite/gas/z80/ez80_adl_all.s: New file. * testsuite/gas/z80/ez80_adl_suf.d: New file. * testsuite/gas/z80/ez80_isuf.s: New file. * testsuite/gas/z80/ez80_z80_all.d: New file. * testsuite/gas/z80/ez80_z80_all.s: New file. * testsuite/gas/z80/ez80_z80_suf.d: New file. * testsuite/gas/z80/r800_extra.d: New file. * testsuite/gas/z80/r800_extra.s: New file. * testsuite/gas/z80/r800_ii8.d: New file. * testsuite/gas/z80/r800_z80_doc.d: New file. * testsuite/gas/z80/z180.d: New file. * testsuite/gas/z80/z180.s: New file. * testsuite/gas/z80/z180_z80_doc.d: New file. * testsuite/gas/z80/z80_doc.d: New file. * testsuite/gas/z80/z80_doc.s: New file. * testsuite/gas/z80/z80_ii8.d: New file. * testsuite/gas/z80/z80_ii8.s: New file. * testsuite/gas/z80/z80_in_f_c.d: New file. * testsuite/gas/z80/z80_in_f_c.s: New file. * testsuite/gas/z80/z80_op_ii_ld.d: New file. * testsuite/gas/z80/z80_op_ii_ld.s: New file. * testsuite/gas/z80/z80_out_c_0.d: New file. * testsuite/gas/z80/z80_out_c_0.s: New file. * testsuite/gas/z80/z80_reloc.d: New file. * testsuite/gas/z80/z80_reloc.s: New file. * testsuite/gas/z80/z80_sli.d: New file. * testsuite/gas/z80/z80_sli.s: New file. ld * Makefile.am: Add new target z80-elf * configure.tgt: Likewise. * emultempl/z80.em: Add support for eZ80 and Z180 architectures. * emulparams/elf32z80.sh: New file. * emultempl/z80elf.em: Likewise. * testsuite/ld-z80/arch_ez80_adl.d: Likewise. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180.d: Likewise. * testsuite/ld-z80/labels.s: Likewise. * testsuite/ld-z80/relocs.s: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/z80.exp: Likewise. opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-08-23Updated Swedish translation for the gas sub-directory.Nick Clifton1-49/+22
2019-08-23 Nick Clifton <nickc@redhat.com> * po/sv.po: Updated Swedish translation.
2019-08-15Updatesd Swdish translation for the gas sub-directory.Nick Clifton1-872/+462
* po/sv.po: Updated Swedish translation.
2019-07-24Update the Swedish translation for the gas sub-directory.Nick Clifton1-4191/+5079
2019-05-24Regen POTFILES for bpfAlan Modra1-0/+2
bfd/ * po/SRC-POTFILES.in: Regenerate. gas/ * po/POTFILES.in: Regenerate. ld/ * po/BLD-POTFILES.in: Regenerate. opcodes/ * po/POTFILES.in: Regenerate.
2019-01-28Updated Russian and French translations for the gas sub-directoryNick Clifton2-5489/+6346
2019-01-21Updated translations for various binutils subdirectories.Nick Clifton1-2744/+3160
2019-01-19Change version to 2.32.51 and regenerate configure and pot files.Nick Clifton1-2698/+3105
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-11-07Add updated French and Portuguese translations.Nick Clifton1-2994/+3072
gas * po/fr.po: Updated French translation. bfd * po/fr.po: Updated French translation. * po/pt.po: Updated Portuguese translation. binutils* po/pt.po: Updated Portuguese translation.
2018-10-29Move struc-symbol.h to symbols.cAlan Modra1-1/+0
This file was never supposed to be widely used. The fact that it has found its way into many gas files led to bugs, typically when code expecting a symbolS* to point at a struct symbol is presented with a struct local_symbol. Also, commit 158184ac9e changed these structs in 2012 but didn't catch all places where symbol bsym was being used to test for a local_symbol. * Makefile.am (HFILES): Delete struc-symbol.h. * doc/internals.texi: Delete struc-symbol.h reference and out of date local symbol description. * struc-symbol.h: Delete. Move contents to.. * symbols.c: ..here. (symbol_on_chain, symbol_symbolS): New functions. * symbols.h (symbol_on_chain, symbol_symbolS): Declare. * cgen.c: Don't #include struc-symbol.h. (gas_cgen_parse_operand): Don't test for local_symbol using bsym, instead call symbol_symbolS. Use symbol_get_bfdsym. (weak_operand_overflow_check, make_right_shifted_expr): Use symbol accessors. * config/obj-coff.c: Don't #include struc-symbol.h. (GET_FILENAME_STRING): Delete. * config/obj-elf.c: Don't #include struc-symbol.h. (elf_file_symbol): Use symbol accessors. (elf_adjust_symtab): Call symbol_on_chain. * config/obj-evax.c: Don't #include struc-symbol.h. * config/tc-nds32.c: Likewise. * config/tc-rl78.c: Likewise. * config/tc-rx.c: Likewise. * config/tc-alpha.c: Likewise. (add_to_link_pool, s_alpha_comm): Use symbol accessors. * config/tc-arc.c: Don't #include struc-symbol.h. (arc_check_relocs): Use symbol accessors, testing gas symbol section rather than bfd symbol section. * config/tc-avr.c: Don't #include struc-symbol.h. (avr_patch_gccisr_frag): Use symbol accessors. * config/tc-bfin.c: Don't #include struc-symbol.h. (bfin_loop_beginend): Use symbol accessors. * config/tc-csky.c: Don't #include struc-symbol.h. (v2_work_movih, v2_work_ori): Use symbol accessors. Check for absolute symbol as well as O_constant. * config/tc-riscv.c: Don't #include struc-symbol.h. (riscv_pre_output_hook): Use symbol accessors. * config/tc-s390.c: Don't #include struc-symbol.h. (s390_literals): Use symbol accessors. * config/tc-score.c (s3_build_la_pic, s3_build_lwst_pic): Use symbol accessors. (s3_relax_branch_inst16, s3_relax_cmpbranch_inst32): Don't test symbol bsym. * config/tc-score7.c: Don't #include struc-symbol.h. (s7_build_la_pic, s7_build_lwst_pic): Use symbol accessors. (s7_b32_relax_to_b16): Don't test symbol bsym. * config/tc-sh.c: Don't #include struc-symbol.h. (insert_loop_bounds): Use symbol accessors. (sh_frob_section): Remove bogus symbol canonicalization. * config/tc-tic54x.c: Don't #include struc-symbol.h. (tic54x_bss): Use symbol accessors. * config/tc-tilegx.c: Don't #include struc-symbol.h. (emit_tilegx_instruction, tilegx_parse_name): Use symbol accessors. * config/tc-tilepro.c: Don't #include struc-symbol.h. (emit_tilepro_instruction, tilepro_parse_name): Use accessors. * config/tc-xtensa.c: Don't #include struc-symbol.h. (xg_assemble_vliw_tokens): Use symbol accessors. (xg_order_trampoline_chain): Likewise. * ehopt.c: Don't #include struc-symbol.h. (check_eh_frame): Correct local symbol test. Use symbol accessors. * write.c: Don't #include struc-symbol.h. (create_note_reloc, maybe_generate_build_notes): Use symbol accessors. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2018-08-01csky regenAlan Modra1-0/+6
bfd/ * po/SRC-POTFILES.in: Regenerate. gas/ * po/POTFILES.in: Regenerate. ld/ * po/BLD-POTFILES.in: Regenerate. opcodes/ * po/POTFILES.in: Regenerate.
2018-07-05Updated Russian, Bulgarian, and Brazilian Portuguese translations for ↵Nick Clifton1-2992/+3075
various components of the binutuls. ld * po/bg.po: Updated Bulgarian translation. * po/pt_BR.po: Updated Brazilian Portuguese translation. binutils* po/bg.po: Updated Bulgarian translation. bfd,gas * po/ru.po: Updated Russian translation.
2018-06-26Updated translations.Nick Clifton1-2993/+3070
gas * po/uk.po: Updated Ukranian translation. bfd * po/uk.po: Updated Ukranian translation. ld * po/uk.po: Updated Ukranian translation. gold * po/uk.po: Updated Ukranian translation. opcodes * po/uk.po: Updated Ukranian translation. * po/de.po: Updated German translation. * po/pt_BR.po: Updated Brazilian Portuguese translation. binutils* po/sv.po: Updated Swedish translation. * po/uk.po: Updated Ukranian translation.
2018-06-24Regenerate configure and pot files with updated binutils version number.Nick Clifton1-2947/+2601
2018-05-25s12z regenAlan Modra1-0/+2
This patch regenerates a number of files that either were edited by hand or not regenerated when s12z support was added to binutils. bfd/ * Makefile.in: Regenerate. * po/SRC-POTFILES.in: Regenerate. gas/ * po/POTFILES.in: Regenerate. ld/ * po/BLD-POTFILES.in: Regenerate. opcodes/ * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2018-05-01Updated Spanish translation for the gas sub-directory.Nick Clifton1-1394/+905
2018-04-25Updated Spanish translation for the gas directory.Nick Clifton1-559/+428
2018-04-25Remove arm-aout and arm-coff supportAlan Modra1-1/+0
This also removes arm-netbsd (not arm-netbsdelf!), arm-openbsd, and arm-riscix. Those targets weren't on the obsolete list but they are all aout, and it doesn't make all that much sense to remove arm-aout without removing them too. bfd/ * Makefile.am: Remove arm-aout and arm-coff support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * aout-arm.c: Delete. * armnetbsd.c: Delete. * riscix.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/arm/objdump.exp: Remove arm-aout and arm-coff support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove arm-aout and arm-coff support. * config/tc-arm.c: Likewise. * config/tc-arm.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/aarch64/codealign.d: Likewise. * testsuite/gas/aarch64/mapping.d: Likewise. * testsuite/gas/aarch64/mapping2.d: Likewise. * testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.d: Likewise. * testsuite/gas/arm/adds-thumb1-reloc-local.d: Likewise. * testsuite/gas/arm/addsw-bad.d: Likewise. * testsuite/gas/arm/align.d: Likewise. * testsuite/gas/arm/align64.d: Likewise. * testsuite/gas/arm/arch7.d: Likewise. * testsuite/gas/arm/arch7a-mp.d: Likewise. * testsuite/gas/arm/arch7em.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise. * testsuite/gas/arm/arm-it-auto-2.d: Likewise. * testsuite/gas/arm/arm-it-auto-3.d: Likewise. * testsuite/gas/arm/arm-it-auto.d: Likewise. * testsuite/gas/arm/arm-it-bad-2.d: Likewise. * testsuite/gas/arm/arm-it.d: Likewise. * testsuite/gas/arm/armv7e-m+fpv5-d16.d: Likewise. * testsuite/gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-scalar.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-simd.d: Likewise. * testsuite/gas/arm/armv8-a+crypto.d: Likewise. * testsuite/gas/arm/armv8-a+fp.d: Likewise. * testsuite/gas/arm/armv8-a+ras.d: Likewise. * testsuite/gas/arm/armv8-a+rdma-warning.d: Likewise. * testsuite/gas/arm/armv8-a+rdma.d: Likewise. * testsuite/gas/arm/armv8-a+simd.d: Likewise. * testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8-r+fp.d: Likewise. * testsuite/gas/arm/armv8-r+simd.d: Likewise. * testsuite/gas/arm/armv8-r-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8_1-a+simd.d: Likewise. * testsuite/gas/arm/armv8_2+rdma.d: Likewise. * testsuite/gas/arm/armv8_2-a.d: Likewise. * testsuite/gas/arm/armv8_3-a-fp.d: Likewise. * testsuite/gas/arm/armv8_3-a-simd.d: Likewise. * testsuite/gas/arm/armv8a-automatic-hlt.d: Likewise. * testsuite/gas/arm/armv8a-automatic-lda.d: Likewise. * testsuite/gas/arm/attr-syntax.d: Likewise. * testsuite/gas/arm/automatic-bw.d: Likewise. * testsuite/gas/arm/automatic-cbz.d: Likewise. * testsuite/gas/arm/automatic-clrex.d: Likewise. * testsuite/gas/arm/automatic-lda.d: Likewise. * testsuite/gas/arm/automatic-ldaex.d: Likewise. * testsuite/gas/arm/automatic-ldaexb.d: Likewise. * testsuite/gas/arm/automatic-ldrex.d: Likewise. * testsuite/gas/arm/automatic-ldrexd.d: Likewise. * testsuite/gas/arm/automatic-movw.d: Likewise. * testsuite/gas/arm/automatic-sdiv.d: Likewise. * testsuite/gas/arm/automatic-strexb.d: Likewise. * testsuite/gas/arm/barrier-bad-thumb.d: Likewise. * testsuite/gas/arm/barrier-bad.d: Likewise. * testsuite/gas/arm/barrier-thumb.d: Likewise. * testsuite/gas/arm/barrier.d: Likewise. * testsuite/gas/arm/bignum1.d: Likewise. * testsuite/gas/arm/blx-bad.d: Likewise. * testsuite/gas/arm/blx-bl-convert.d: Likewise. * testsuite/gas/arm/blx-local.s: Likewise. * testsuite/gas/arm/crc32-armv8-a-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-a.d: Likewise. * testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-r.d: Likewise. * testsuite/gas/arm/dis-data.d: Likewise. * testsuite/gas/arm/dis-data2.d: Likewise. * testsuite/gas/arm/dis-data3.d: Likewise. * testsuite/gas/arm/eabi_attr_1.d: Likewise. * testsuite/gas/arm/fp-save.d: Likewise. * testsuite/gas/arm/group-reloc-alu-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-alu-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-alu.d: Likewise. * testsuite/gas/arm/group-reloc-ldc-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldc-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldc.d: Likewise. * testsuite/gas/arm/group-reloc-ldr-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldr-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldr.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs.d: Likewise. * testsuite/gas/arm/insn-error-a.d: Likewise. * testsuite/gas/arm/insn-error-t.d: Likewise. * testsuite/gas/arm/inst-po-2.d: Likewise. * testsuite/gas/arm/inst-po-3.d: Likewise. * testsuite/gas/arm/inst-po-be.d: Likewise. * testsuite/gas/arm/inst-po.d: Likewise. * testsuite/gas/arm/ldconst.d: Likewise. * testsuite/gas/arm/ldgesb-bad.d: Likewise. * testsuite/gas/arm/ldgesh-bad.d: Likewise. * testsuite/gas/arm/ldst-offset0.d: Likewise. * testsuite/gas/arm/local_function.d: Likewise. * testsuite/gas/arm/local_label_coff.d: Likewise. * testsuite/gas/arm/local_label_elf.d: Likewise. * testsuite/gas/arm/mapping.d: Likewise. * testsuite/gas/arm/mapping2.d: Likewise. * testsuite/gas/arm/mapping3.d: Likewise. * testsuite/gas/arm/mapping4.d: Likewise. * testsuite/gas/arm/mapshort-elf.d: Likewise. * testsuite/gas/arm/mask_1-armv8-a.d: Likewise. * testsuite/gas/arm/mask_1-armv8-r.d: Likewise. * testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.d: Likewise. * testsuite/gas/arm/movs-thumb1-reloc-local.d: Likewise. * testsuite/gas/arm/movw-local.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v6t2.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v7-m.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v7e-m.d: Likewise. * testsuite/gas/arm/msr-imm-bad.d: Likewise. * testsuite/gas/arm/msr-reg-bad.d: Likewise. * testsuite/gas/arm/msr-reg-thumb.d: Likewise. * testsuite/gas/arm/nomapping.d: Likewise. * testsuite/gas/arm/nops.d: Likewise. * testsuite/gas/arm/pic.d: Likewise. * testsuite/gas/arm/pinsn.d: Likewise. * testsuite/gas/arm/plt-1.d: Likewise. * testsuite/gas/arm/pr21458.d: Likewise. * testsuite/gas/arm/pr9722.d: Likewise. * testsuite/gas/arm/strex-t.d: Likewise. * testsuite/gas/arm/t2-branch-global.d: Likewise. * testsuite/gas/arm/target-reloc-1.d: Likewise. * testsuite/gas/arm/thumb-b-bad.d: Likewise. * testsuite/gas/arm/thumb-w-bad.d: Likewise. * testsuite/gas/arm/thumb-w-good.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumb2_it.d: Likewise. * testsuite/gas/arm/thumb2_it_auto.d: Likewise. * testsuite/gas/arm/thumb2_it_search.d: Likewise. * testsuite/gas/arm/thumb2_ldmstm.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_armv6.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_armv6t2.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Likewise. * testsuite/gas/arm/thumb2_pool.d: Likewise. * testsuite/gas/arm/thumb2_vpool.d: Likewise. * testsuite/gas/arm/thumb2_vpool_be.d: Likewise. * testsuite/gas/arm/thumb32.d: Likewise. * testsuite/gas/arm/thumbver.d: Likewise. * testsuite/gas/arm/tls.d: Likewise. * testsuite/gas/arm/tls_vxworks.d: Likewise. * testsuite/gas/arm/undefined.d: Likewise. * testsuite/gas/arm/undefined_coff.d: Likewise. * testsuite/gas/arm/unwind.d: Likewise. * testsuite/gas/arm/v4bx.d: Likewise. * testsuite/gas/arm/vcmp-noprefix-imm.d: Likewise. * testsuite/gas/arm/vcvt-bad.d: Likewise. * testsuite/gas/arm/vfma1.d: Likewise. * testsuite/gas/arm/vldconst.d: Likewise. * testsuite/gas/arm/vldconst_be.d: Likewise. * testsuite/gas/arm/vldm-arm.d: Likewise. * testsuite/gas/arm/vldr.d: Likewise. * testsuite/gas/arm/weakdef-1.d: Likewise. * testsuite/gas/arm/weakdef-2.d: Likewise. * config/te-riscix.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove arm-aout and arm-coff support. * configure.tgt: Likewise. * testsuite/ld-arm/attr-merge-div-00.d: Likewise. * testsuite/ld-arm/attr-merge-div-01-m3.d: Likewise. * testsuite/ld-arm/attr-merge-div-01.d: Likewise. * testsuite/ld-arm/attr-merge-div-02.d: Likewise. * testsuite/ld-arm/attr-merge-div-10-m3.d: Likewise. * testsuite/ld-arm/attr-merge-div-10.d: Likewise. * testsuite/ld-arm/attr-merge-div-11.d: Likewise. * testsuite/ld-arm/attr-merge-div-12.d: Likewise. * testsuite/ld-arm/attr-merge-div-120.d: Likewise. * testsuite/ld-arm/attr-merge-div-20.d: Likewise. * testsuite/ld-arm/attr-merge-div-21.d: Likewise. * testsuite/ld-arm/attr-merge-div-22.d: Likewise. * testsuite/ld-arm/attr-merge-hardfp-use-1.d: Likewise. * testsuite/ld-arm/attr-merge-hardfp-use-2.d: Likewise. * testsuite/ld-arm/attr-merge-nosection-1.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-2.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-2r.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-3.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-1.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-10.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-10r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-11.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-11r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-12.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-12r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-13.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-13r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-14.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-14r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-1r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-2.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-2r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-3.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-4.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-5.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-6.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-6r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-7.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-7r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-8.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-8r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-9.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-9r.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-00-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-00.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-02-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-02.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-04-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-04.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-20-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-20.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-22-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-22.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-24-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-40-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-40.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-42-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-44-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-44.d: Likewise. * testsuite/ld-arm/eabi-hard-float.d: Likewise. * testsuite/ld-arm/eabi-soft-float-ABI4.d: Likewise. * testsuite/ld-arm/eabi-soft-float-r.d: Likewise. * testsuite/ld-arm/eabi-soft-float.d: Likewise. * testsuite/ld-arm/gc-hidden-1.d: Likewise. * emulparams/armaoutb.sh: Delete. * emulparams/armaoutl.sh: Delete. * emulparams/armcoff.sh: Delete. * emulparams/armnbsd.sh: Delete. * emulparams/riscix.sh: Delete. * scripttempl/armaout.sc: Delete. * scripttempl/armcoff.sc: Delete. * scripttempl/riscix.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-20Updated Spanish translation for gas sub-directoryNick Clifton1-923/+726
2018-04-18various i386-aout and i386-coff target removalAlan Modra1-3/+0
Also tidies some other aout leftovers in binutils-common.exp. bfd/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * targets.c: Likewise. * freebsd.h: Delete. * i386dynix.c: Delete. * i386freebsd.c: Delete. * i386linux.c: Delete. * i386mach3.c: Delete. * i386netbsd.c: Delete. * i386os9k.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/lib/binutils-common.exp: Remove support for assorted aout targets. gas/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config/obj-elf.c: Likewise. * config/tc-i386.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * config/te-dynix.h: Delete. * config/te-i386aix.h: Delete. * config/te-mach.h: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. include/ * aout/dynix3.h: Delete. ld/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * configure.tgt: Likewise. * testsuite/ld-discard/discard.exp: Likewise. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/tls.exp: Likewise. * testsuite/ld-elf/tls_common.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-gc/abi-note.d: Likewise. * testsuite/ld-gc/pr19167.d: Likewise. * testsuite/ld-gc/pr20022.d: Likewise. * testsuite/ld-gc/start.d: Likewise. * testsuite/ld-gc/stop.d: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc.exp: Likewise. * testsuite/ld-linkonce/linkonce.exp: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-scripts/empty-address-2a.d: Likewise. * testsuite/ld-scripts/empty-address-2b.d: Likewise. * testsuite/ld-scripts/phdrs2.exp: Likewise. * testsuite/ld-scripts/section-match-1.d: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-size/size.exp: Likewise. * testsuite/ld-sparc/sparc.exp: Likewise. * emulparams/i386coff.sh: Delete. * emulparams/i386linux.sh: Delete. * emulparams/i386mach.sh: Delete. * emulparams/i386nbsd.sh: Delete. * emulparams/vsta.sh: Delete. * scripttempl/i386coff.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove arm-epoc-pe supportAlan Modra1-1/+0
bfd/ * Makefile.am: Remove arm-epoc-pe support. * coff-arm.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * epoc-pe-arm.c: Delete. * epoc-pei-arm.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * configure.ac: Remove arm-epoc-pe support. * dlltool.c: Likewise. * configure: Regenerate. gas/ * Makefile.am: Remove arm-epoc-pe support. * config/tc-arm.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/gas.exp: Likewise. * testsuite/gas/arm/local_label_coff.d: Likewise. * testsuite/gas/arm/undefined.d: Likewise. * testsuite/gas/arm/undefined_coff.d: Likewise. * config/te-epoc-pe.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove arm-epoc-pe support. * configure.tgt: Likewise. * emultempl/pe.em: Likewise. * pe-dll.c: Likewise. * testsuite/ld-scripts/fill.d: Likewise. * testsuite/ld-scripts/fill16.d: Likewise. * emulparams/arm_epoc_pe.sh: Delete. * scripttempl/epocpe.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove sparc-aout and sparc-coff supportAlan Modra1-1/+0
bfd/ * Makefile.am: Remove sparc-aout and sparc-coff support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * aout-sparcle.c: Delete. * aoutf1.h: Delete. * cf-sparclynx.c: Delete. * coff-sparc.c: Delete. * demo64.c: Delete. * sparclinux.c: Delete. * sparclynx.c: Delete. * sparcnetbsd.c: Delete. * sunos.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/lib/binutils-common.exp: Remove sparc-aout and sparc-coff support. gas/ * Makefile.am: Remove sparc-aout and sparc-coff support. * config/obj-coff.h: Likewise. * config/tc-sparc.c: Likewise. * config/tc-sparc.h: Likewise. * configure.tgt: Likewise. * config/te-sparcaout.h: Delete. * testsuite/gas/sun4/addend.d: Delete. * testsuite/gas/sun4/addend.exp: Delete. * testsuite/gas/sun4/addend.s: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sparc-aout and sparc-coff support. * configure.tgt: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * emulparams/coff_sparc.sh: Delete. * emulparams/sparcaout.sh: Delete. * emulparams/sparclinux.sh: Delete. * emulparams/sparcnbsd.sh: Delete. * emulparams/sun4.sh: Delete. * scripttempl/sparccoff.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove m68k-aout and m68k-coff supportAlan Modra1-2/+0
include/ * aout/host.h: Remove m68k-aout and m68k-coff support. * aout/hp300hpux.h: Delete. * coff/apollo.h: Delete. * coff/aux-coff.h: Delete. * coff/m68k.h: Delete. bfd/ * Makefile.am: Remove m68k-aout and m68k-coff support. * aoutf1.h: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * bfd-in.h: Likewise. * bfd.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * configure.host: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * freebsd.h: Likewise. * gen-aout.c: Likewise. * hpux-core.c: Likewise. * libaout.h: Likewise. * libbfd-in.h: Likewise. * pdp11.c: Likewise. * peicode.h: Likewise. * riscix.c: Likewise. * targets.c: Likewise. * aout0.c: Delete. * coff-apollo.c: Delete. * coff-aux.c: Delete. * coff-m68k.c: Delete. * coff-svm68k.c: Delete. * coff-u68k.c: Delete. * hosts/delta68.h: Delete. * hosts/hp300bsd.h: Delete. * hosts/m68kaux.h: Delete. * hosts/news.h: Delete. * hp300bsd.c: Delete. * hp300hpux.c: Delete. * liboasys.h: Delete. * m68k4knetbsd.c: Delete. * m68klinux.c: Delete. * m68knetbsd.c: Delete. * oasys.c: Delete. * versados.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff support. * testsuite/binutils-all/copy-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove m68k-aout and m68k-coff support. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/weakref1u.d: Likewise. * testsuite/gas/m68k/all.exp: Likewise. * testsuite/gas/m68k/br-isaa.d: Likewise. * testsuite/gas/m68k/br-isab.d: Likewise. * testsuite/gas/m68k/br-isac.d: Likewise. * config/te-psos.h: Delete. * config/te-sun3.h: Delete. * testsuite/gas/m68k-coff/gas.exp: Delete. * testsuite/gas/m68k-coff/p2389.s: Delete. * testsuite/gas/m68k-coff/p2389a.s: Delete. * testsuite/gas/m68k-coff/p2430.s: Delete. * testsuite/gas/m68k-coff/p2430a.s: Delete. * testsuite/gas/m68k-coff/t1.s: Delete. * testsuite/gas/m68k/p3041.d: Delete. * testsuite/gas/m68k/p3041.s: Delete. * testsuite/gas/m68k/p3041data.d: Delete. * testsuite/gas/m68k/p3041data.s: Delete. * testsuite/gas/m68k/p3041pcrel.d: Delete. * testsuite/gas/m68k/p3041pcrel.s: Delete. * testsuite/gas/m68k/t2.d: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove m68k-aout and m68k-coff support. * configure.tgt: Likewise. * emultempl/m68kelf.em: Likewise. * ld.texinfo: Likewise. * mri.c: Likewise. * emulparams/delta68.sh: Delete. * emulparams/hp300bsd.sh: Delete. * emulparams/hp3hpux.sh: Delete. * emulparams/m68k4knbsd.sh: Delete. * emulparams/m68kaout.sh: Delete. * emulparams/m68kaux.sh: Delete. * emulparams/m68kcoff.sh: Delete. * emulparams/m68klinux.sh: Delete. * emulparams/m68knbsd.sh: Delete. * emulparams/m68kpsos.sh: Delete. * emulparams/sun3.sh: Delete. * emultempl/m68kcoff.em: Delete. * scripttempl/delta68.sc: Delete. * scripttempl/m68kaux.sc: Delete. * scripttempl/m68kcoff.sc: Delete. * scripttempl/psos.sc: Delete. * testsuite/ld-versados/t1-1.ro: Delete. * testsuite/ld-versados/t1-2.ro: Delete. * testsuite/ld-versados/t1.ld: Delete. * testsuite/ld-versados/t1.ook: Delete. * testsuite/ld-versados/t2-1.ro: Delete. * testsuite/ld-versados/t2-2.ro: Delete. * testsuite/ld-versados/t2-3.ro: Delete. * testsuite/ld-versados/t2.ld: Delete. * testsuite/ld-versados/t2.ook: Delete. * testsuite/ld-versados/versados.exp: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove sh5 and sh64 supportAlan Modra1-2/+0
include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
generated by cgit v1.1 at 2024-11-25 22:54:57 +0000