aboutsummaryrefslogtreecommitdiff
path: root/gas/po/gas.pot
AgeCommit message (Collapse)AuthorFilesLines
2023-11-15Finalized intl-update patchesArsen Arsenovi?1-1310/+1421
* intl: Remove directory. Replaced with out-of-tree GNU gettext. * .gitignore: Add '/gettext*'. * configure.ac (host_libs): Replace intl with gettext. (hbaseargs, bbaseargs, baseargs): Split baseargs into {h,b}baseargs. (skip_barg): New flag. Skips appending current flag to bbaseargs. <library exemptions>: Exempt --with-libintl-{type,prefix} from target and build machine argument passing. * configure: Regenerate. * Makefile.def (host_modules): Replace intl module with gettext module. (configure-ld): Depend on configure-gettext. * Makefile.in: Regenerate. * src-release.sh: Remove references to the intl/ directory.
2023-08-02Revert "2.41 Release sources"Sam James1-1/+1
This reverts commit 675b9d612cc59446e84e2c6d89b45500cb603a8d. See https://sourceware.org/pipermail/binutils/2023-August/128761.html.
2023-08-022.41 Release sourcesbinutils-2_41-releaseNick Clifton1-1/+1
2023-07-03Change version number to 2.41.50 and regenerate filesNick Clifton1-2483/+2666
2022-12-31Update version number and regenerate filesNick Clifton1-2609/+2790
2022-07-08Update version to 2.39.50 and regenerate filesNick Clifton1-1982/+2008
2022-01-22Change version number to 2.38.50 and regenerate filesNick Clifton1-10/+10
2022-01-17Update the config.guess and config.sub files from the master repository and ↵Nick Clifton1-1800/+2143
regenerate files.
2021-08-11Deprecate a.out support for NetBSD targets.John Ericson1-1697/+1686
As discussed previously, a.out support is now quite deprecated, and in some cases removed, in both Binutils itself and NetBSD, so this legacy default makes little sense. `netbsdelf*` and `netbsdaout*` still work allowing the user to be explicit about there choice. Additionally, the configure script warns about the change as Nick Clifton requested. One possible concern was the status of NetBSD on NS32K, where only a.out was supported. But per [1] NetBSD has removed support, and if it were to come back, it would be with ELF. The binutils implementation is therefore marked obsolete, per the instructions in the last message. With that patch and this one applied, I have confirmed the following: --target=i686-unknown-netbsd --target=i686-unknown-netbsdelf builds completely --target=i686-unknown-netbsdaout properly fails because target is deprecated. --target=vax-unknown-netbsdaout builds completely except for gas, where the target is deprecated. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html --- bfd/config.bfd | 43 +++++++++++++-------- bfd/configure.ac | 5 +-- binutils/testsuite/binutils-all/nm.exp | 2 +- binutils/testsuite/lib/binutils-common.exp | 7 +--- config/picflag.m4 | 4 +- gas/configure.tgt | 9 +++-- gas/testsuite/gas/arm/blx-bl-convert.d | 2 +- gas/testsuite/gas/arm/blx-local-thumb.d | 2 +- gas/testsuite/gas/sh/basic.exp | 2 +- gdb/configure.host | 34 +++++++---------- gdb/configure.tgt | 2 +- gdb/testsuite/gdb.asm/asm-source.exp | 6 +-- intl/configure | 2 +- ld/configure.tgt | 44 +++++++++++----------- ld/testsuite/ld-arm/arm-elf.exp | 4 +- ld/testsuite/ld-elf/elf.exp | 2 +- ld/testsuite/ld-elf/shared.exp | 4 +- libiberty/configure | 4 +-
2021-07-07Fix problems translating messages when a percentage sign appears at the end ↵Nick Clifton1-296/+300
of a string. PR 28051 gas * config/tc-i386.c (offset_in_range): Reformat error messages in order to fix problems when translating. (md_assemble): Likewise. * messages.c (as_internal_value_out_of_range): Likewise. * read.c (emit_expr_with_reloc): Likewise. * testsuite/gas/all/overflow.l Change expected output format. * po/gas.pot: Regenerate. bfd * coff-rs6000.c (xcoff_reloc_type_tls): Reformat error messages in order to fix problems when translating. * cofflink.c (_bfd_coff_write_global_sym): Likewise. * elfnn-aarch64.c (_bfd_aarch64_erratum_843419_branch_to_stub): Likewise. * po/bfd.pot: Regenerate.
2021-07-03Update version number and regenerate filesNick Clifton1-2790/+2841
2021-01-09Change version number to 2.36.50 and regenerate filesNick Clifton1-1055/+1076
2020-10-22Fix printf formatting errors where "0x" is used as a prefix for a decimal ↵Dr. David Alan Gilbert1-3521/+3342
number. bfd * po/es.po: Fix printf format binutils * windmc.c: Fix printf format gas * config/tc-arc.c: Fix printf format opcodes * po/es.po: Fix printf format sim * arm/armos.c: Fix printf format * ppc/emul_netbsd.c: Fix printf format -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
2020-07-06Fix spelling mistakes in some of the binutils sub-directories.Nick Clifton1-6/+6
PR 26204 gas * config/tc-arm.c: Fix spelling mistake. * config/tc-riscv.c: Likewise. * config/tc-z80.c: Likewise. * po/gas.pot: Regenerate. ld * lexsup.c: Fix spelling mistake. * po/ld.pot: Regenerate. opcodes * arc-dis.c: Fix spelling mistake. * po/opcodes.pot: Regenerate.
2020-07-04Update version to 2.35.50 and regenerate filesNick Clifton1-1571/+1587
2020-05-20[PATCH v2 0/9] RISC-V: Support version controling for ISA standard ↵Nelson Chu1-2010/+2350
extensions and CSR 1. Remove the -mriscv-isa-version and --with-riscv-isa-version options. We can still use -march to choose the version for each extensions, so there is no need to add these. 2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...]. Unlike the architecture string has specified by spec, ther is no need to do the same thing for options. 3. Spilt the patches to reduce the burdens of review. [PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions to [PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions [PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default. [PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version. to [PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version. [PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version. 4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c. The behavior is same as comparing the choosen privilege spec. include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean. (enum riscv_isa_spec_class): New enum class. All supported ISA spec belong to one of the class (struct riscv_ext_version): New structure holds version information for the specific ISA. * opcode/riscv-opc.h (DECLARE_CSR): There are two version information, define_version and abort_version. The define_version means which privilege spec is started to define the CSR, and the abort_version means which privilege spec is started to abort the CSR. If the CSR is valid for the newest spec, then the abort_version should be PRIV_SPEC_CLASS_DRAFT. (DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR. * opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define the current supported privilege spec versions. (struct riscv_csr_extra): Add new fields to store more information about the CSR. We use these information to find the suitable CSR address when user choosing a specific privilege spec. binutils * dwarf.c: Updated since DECLARE_CSR is changed. opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store all information about the supported spec and the corresponding ISA versions. Currently, only Zicsr is supported to verify the correctness of Z sub extension settings. Others will be supported in the future patches. (struct isa_spec_t, isa_specs): List for all supported ISA spec classes and the corresponding strings. (riscv_get_isa_spec_class): New function. Get the corresponding ISA spec class by giving a ISA spec string. * riscv-opc.c (struct priv_spec_t): New structure. (struct priv_spec_t priv_specs): List for all supported privilege spec classes and the corresponding strings. (riscv_get_priv_spec_class): New function. Get the corresponding privilege spec class by giving a spec string. (riscv_get_priv_spec_name): New function. Get the corresponding privilege spec string by giving a CSR version class. * riscv-dis.c: Updated since DECLARE_CSR is changed. * riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR according to the chosen version. Build a hash table riscv_csr_hash to store the valid CSR for the chosen pirv verison. Dump the direct CSR address rather than it's name if it is invalid. (parse_riscv_dis_option_without_args): New function. Parse the options without arguments. (parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to parse the options without arguments first, and then handle the options with arguments. Add the new option -Mpriv-spec, which has argument. * riscv-dis.c (print_riscv_disassembler_options): Add description about the new OBJDUMP option. ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated priv attributes according to the -mpriv-spec option. * testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise. bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function get_default_version. It is used to find the default version for the specific extension. * elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters default_major_version and default_minor_version. Add new bfd_boolean parameter *use_default_version. Set it to TRUE if we need to call the callback rps->get_default_version to find the default version. (riscv_parse_std_ext): Call rps->get_default_version if we fail to find the default version in riscv_parsing_subset_version, and then call riscv_add_subset to add the subset into subset list. (riscv_parse_prefixed_ext): Likewise. (riscv_std_z_ext_strtab): Support Zicsr extensions. * elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the strings rather than characters. riscv_merge_arch_attr_info): The callback function get_default_version is only needed for assembler, so set it to NULL int the linker. * elfxx-riscv.c (riscv_estimate_digit): Remove the static. * elfxx-riscv.h: Updated. gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated. * config/tc-riscv.c (default_arch_with_ext, default_isa_spec): Static variables which are used to set the ISA extensions. You can use -march (or ELF build attributes) and -misa-spec to set them, respectively. (ext_version_hash): The hash table used to handle the extensions with versions. (init_ext_version_hash): Initialize the ext_version_hash according to riscv_ext_version_table. (riscv_get_default_ext_version): The callback function of riscv_parse_subset_t. According to the choosed ISA spec, get the default version for the specific extension. (riscv_set_arch): Set the callback function. (enum options, struct option md_longopts): Add new option -misa-spec. (md_parse_option): Do not call riscv_set_arch for -march. We will call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class to set default_isa_spec class. (riscv_after_parse_args): Call init_ext_version_hash to initialize the ext_version_hash, and then call riscv_set_arch to set the architecture with versions according to default_arch_with_ext. * testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for x extensions. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we already set it's version to 2p1 by march, so no need to use the default 2p2 version. For m-ext, we do not set the version by -march and ELF arch attribute, so set the default 2p0 to it. For zicsr, it is not defined in ISA spec 2p2, so set 0p0 to it. * testsuite/gas/riscv/attribute-10.d: New testcase. The version of zicsr is 2p0 according to ISA spec 20191213. * config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT) (DEFAULT_RISCV_ISA_SPEC): Default configure option settings. You can set them by configure options --with-arch and --with-isa-spec, respectively. (riscv_set_default_isa_spec): New function used to set the default ISA spec. (md_parse_option): Call riscv_set_default_isa_spec rather than call riscv_get_isa_spec_class directly. (riscv_after_parse_args): If the -isa-spec is not set, then we set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by calling riscv_set_default_isa_spec. * testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since the --with-isa-spec may be set to different ISA spec. * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * configure.ac: Add configure options, --with-arch and --with-isa-spec. * configure: Regenerated. * config.in: Regenerated. * config/tc-riscv.c (default_priv_spec): Static variable which is used to check if the CSR is valid for the chosen privilege spec. You can use -mpriv-spec to set it. (enum reg_class): We now get the CSR address from csr_extra_hash rather than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX. (riscv_init_csr_hashes): Only need to initialize one hash table csr_extra_hash. (riscv_csr_class_check): Change the return type to void. Don't check the ISA dependency if -mcsr-check isn't set. (riscv_csr_version_check): New function. Check and find the CSR address from csr_extra_hash, according to default_priv_spec. Report warning for the invalid CSR if -mcsr-check is set. (reg_csr_lookup_internal): Updated. (reg_lookup_internal): Likewise. (md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed. (enum options, struct option md_longopts): Add new GAS option -mpriv-spec. (md_parse_option): Call riscv_set_default_priv_version to set default_priv_spec. (riscv_after_parse_args): If -mpriv-spec isn't set, then set the default privilege spec to the newest one. (enum riscv_csr_class, struct riscv_csr_extra): Move them to include/opcode/riscv.h. * testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want to check the ISA dependency for CSR, so fix the spec version by adding -mpriv-spec=1.11. * testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some version warnings for the test case. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case. Check whether the CSR is valid when privilege version 1.9 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case. Check whether the CSR is valid when privilege version 1.9.1 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case. Check whether the CSR is valid when privilege version 1.10 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case. Check whether the CSR is valid when privilege version 1.11 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise. * config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option setting. You can set it by configure option --with-priv-spec. (riscv_set_default_priv_spec): New function used to set the default privilege spec. (md_parse_option): Call riscv_set_default_priv_spec rather than call riscv_get_priv_spec_class directly. (riscv_after_parse_args): If -mpriv-spec isn't set, then we set the default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by calling riscv_set_default_priv_spec. * testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since the --with-priv-spec may be set to different privilege spec. * testsuite/gas/riscv/priv-reg.d: Likewise. * configure.ac: Add configure option --with-priv-spec. * configure: Regenerated. * config.in: Regenerated. * config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to explicit_attr. Set it to TRUE if any ELF attribute is found. (riscv_set_default_priv_spec): Try to set the default_priv_spec if the priv attributes are set. (md_assemble): Set the default_priv_spec according to the priv attributes when we start to assemble instruction. (riscv_write_out_attrs): Rename riscv_write_out_arch_attr to riscv_write_out_attrs. Update the arch and priv attributes. If we don't set the corresponding ELF attributes, then try to output the default ones. (riscv_set_public_attributes): If any ELF attribute or -march-attr options is set (explicit_attr is TRUE), then call riscv_write_out_attrs to update the arch and priv attributes. (s_riscv_attribute): Make sure all arch and priv attributes are set before any instruction. * testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any ELF attribute or -march-attr is set. If the priv attributes are not set, then try to update them by the default setting (-mpriv-spec or --with-priv-spec). * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-09.d: Likewise. * testsuite/gas/riscv/attribute-10.d: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec set by priv attributes must be supported. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated priv attributes according to the -mpriv-spec option. * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise. * testsuite/gas/riscv/priv-reg.d: Removed. * testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the CSR according to the priv spec 1.9. * testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the CSR according to the priv spec 1.9.1. * testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the CSR according to the priv spec 1.10. * testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the CSR according to the priv spec 1.11. * config/tc-riscv.c (md_show_usage): Add descriptions about the new GAS options. * doc/c-riscv.texi: Likewise.
2020-01-18Update version to 2.34.50. Regenerate configure and .pot files.Nick Clifton1-462/+467
2020-01-02Add support for the GBZ80, Z180, and eZ80 variants of the Z80 architecure. ↵Sergey Belyashov1-2885/+3667
Add an ELF based target for these as well. PR 25224 bfd * Makefile.am: Add z80-elf target support. * configure.ac: Likewise. * targets.c: Likewise. * config.bfd: Add z80-elf target support and new arches: ez80 and z180. * elf32-z80.c: New file. * archures.c: Add new z80 architectures: eZ80 and Z180. * coffcode.h: Likewise. * cpu-z80.c: Likewise. * bfd-in2.h: Likewise plus additional Z80 relocations. * coff-z80.c: Add new relocations for Z80 target and local label check. gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support for assembler code generated by SDCC. Add new relocation types. Add z80-elf target support. * config/tc-z80.h: Add z80-elf target support. Enable dollar local labels. Local labels starts from ".L". * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict. * testsuite/gas/all/fwdexp.s: Likewise. * testsuite/gas/z80/suffix.d: Fix failure on ELF target. * testsuite/gas/z80/z80.exp: Add new tests * testsuite/gas/z80/dollar.d: New file. * testsuite/gas/z80/dollar.s: New file. * testsuite/gas/z80/ez80_adl_all.d: New file. * testsuite/gas/z80/ez80_adl_all.s: New file. * testsuite/gas/z80/ez80_adl_suf.d: New file. * testsuite/gas/z80/ez80_isuf.s: New file. * testsuite/gas/z80/ez80_z80_all.d: New file. * testsuite/gas/z80/ez80_z80_all.s: New file. * testsuite/gas/z80/ez80_z80_suf.d: New file. * testsuite/gas/z80/r800_extra.d: New file. * testsuite/gas/z80/r800_extra.s: New file. * testsuite/gas/z80/r800_ii8.d: New file. * testsuite/gas/z80/r800_z80_doc.d: New file. * testsuite/gas/z80/z180.d: New file. * testsuite/gas/z80/z180.s: New file. * testsuite/gas/z80/z180_z80_doc.d: New file. * testsuite/gas/z80/z80_doc.d: New file. * testsuite/gas/z80/z80_doc.s: New file. * testsuite/gas/z80/z80_ii8.d: New file. * testsuite/gas/z80/z80_ii8.s: New file. * testsuite/gas/z80/z80_in_f_c.d: New file. * testsuite/gas/z80/z80_in_f_c.s: New file. * testsuite/gas/z80/z80_op_ii_ld.d: New file. * testsuite/gas/z80/z80_op_ii_ld.s: New file. * testsuite/gas/z80/z80_out_c_0.d: New file. * testsuite/gas/z80/z80_out_c_0.s: New file. * testsuite/gas/z80/z80_reloc.d: New file. * testsuite/gas/z80/z80_reloc.s: New file. * testsuite/gas/z80/z80_sli.d: New file. * testsuite/gas/z80/z80_sli.s: New file. ld * Makefile.am: Add new target z80-elf * configure.tgt: Likewise. * emultempl/z80.em: Add support for eZ80 and Z180 architectures. * emulparams/elf32z80.sh: New file. * emultempl/z80elf.em: Likewise. * testsuite/ld-z80/arch_ez80_adl.d: Likewise. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180.d: Likewise. * testsuite/ld-z80/labels.s: Likewise. * testsuite/ld-z80/relocs.s: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/z80.exp: Likewise. opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
2019-01-19Change version to 2.32.51 and regenerate configure and pot files.Nick Clifton1-2698/+3105
2018-06-24Regenerate configure and pot files with updated binutils version number.Nick Clifton1-2947/+2601
2018-01-13Update pot filesNick Clifton1-2430/+2593
2017-03-30Add support for the WebAssembly file format and the wasm32 ELF conversion to ↵Pip Cet1-1661/+1825
gas and the binutils. binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_none_reloc_): Likewise. * NEWS: Mention the new support. * testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32 as ELF target. (supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE. * testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations. * testsuite/binutils-all/wasm32: New directory. * testsuite/binutils-all/wasm32/create-wasm.d: New file. * testsuite/binutils-all/wasm32/create-wasm.s: Likewise. * testsuite/binutils-all/wasm32/custom-section.d: Likewise. * testsuite/binutils-all/wasm32/custom-section.s: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise. * testsuite/binutils-all/wasm32/long-sections.d: Likewise. * testsuite/binutils-all/wasm32/long-sections.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise. * testsuite/binutils-all/wasm32/prepared-section.d: Likewise. * testsuite/binutils-all/wasm32/prepared-section.s: Likewise. * testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests. gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target. * config/tc-wasm32.c: New file: Add WebAssembly assembler target. * Makefile.am: Add WebAssembly assembler target. * configure.tgt: Add WebAssembly assembler target. * doc/c-wasm32.texi: New file: Start documenting WebAssembly assembler. * doc/all.texi: Define WASM32. * doc/as.texinfo: Add WebAssembly entries. * NEWS: Mention the new support. * Makefile.in: Regenerate. * po/gas.pot: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/wasm32: New directory. * testsuite/gas/wasm32/allinsn.d: New file. * testsuite/gas/wasm32/allinsn.s: New file. * testsuite/gas/wasm32/illegal.l: New file. * testsuite/gas/wasm32/illegal.s: New file. * testsuite/gas/wasm32/illegal-2.l: New file. * testsuite/gas/wasm32/illegal-2.s: New file. * testsuite/gas/wasm32/illegal-3.l: New file. * testsuite/gas/wasm32/illegal-3.s: New file. * testsuite/gas/wasm32/illegal-4.l: New file. * testsuite/gas/wasm32/illegal-4.s: New file. * testsuite/gas/wasm32/illegal-5.l: New file. * testsuite/gas/wasm32/illegal-5.s: New file. * testsuite/gas/wasm32/illegal-6.l: New file. * testsuite/gas/wasm32/illegal-6.s: New file. * testsuite/gas/wasm32/illegal-7.l: New file. * testsuite/gas/wasm32/illegal-7.s: New file. * testsuite/gas/wasm32/illegal-8.l: New file. * testsuite/gas/wasm32/illegal-8.s: New file. * testsuite/gas/wasm32/illegal-9.l: New file. * testsuite/gas/wasm32/illegal-9.s: New file. * testsuite/gas/wasm32/illegal-10.l: New file. * testsuite/gas/wasm32/illegal-10.s: New file. * testsuite/gas/wasm32/illegal-11.l: New file. * testsuite/gas/wasm32/illegal-11.s: New file. * testsuite/gas/wasm32/illegal-12.l: New file. * testsuite/gas/wasm32/illegal-12.s: New file. * testsuite/gas/wasm32/illegal-13.l: New file. * testsuite/gas/wasm32/illegal-13.s: New file. * testsuite/gas/wasm32/illegal-14.l: New file. * testsuite/gas/wasm32/illegal-14.s: New file. * testsuite/gas/wasm32/illegal-15.l: New file. * testsuite/gas/wasm32/illegal-15.s: New file. * testsuite/gas/wasm32/illegal-16.l: New file. * testsuite/gas/wasm32/illegal-16.s: New file. * testsuite/gas/wasm32/illegal-17.l: New file. * testsuite/gas/wasm32/illegal-17.s: New file. * testsuite/gas/wasm32/illegal-18.l: New file. * testsuite/gas/wasm32/illegal-18.s: New file. * testsuite/gas/wasm32/illegal-19.l: New file. * testsuite/gas/wasm32/illegal-19.s: New file. * testsuite/gas/wasm32/illegal-20.l: New file. * testsuite/gas/wasm32/illegal-20.s: New file. * testsuite/gas/wasm32/illegal-21.l: New file. * testsuite/gas/wasm32/illegal-21.s: New file. * testsuite/gas/wasm32/illegal-22.l: New file. * testsuite/gas/wasm32/illegal-22.s: New file. * testsuite/gas/wasm32/illegal-24.l: New file. * testsuite/gas/wasm32/illegal-24.s: New file. * testsuite/gas/wasm32/illegal-25.l: New file. * testsuite/gas/wasm32/illegal-25.s: New file. * testsuite/gas/wasm32/reloc.d: New file. * testsuite/gas/wasm32/reloc.s: New file. * testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly architecture. opcodes * configure.ac: Add (empty) bfd_wasm32_arch target. * configure: Regenerate * po/opcodes.pot: Regenerate. include * opcode/wasm.h: New file to support wasm32 architecture. * elf/wasm32.h: Add R_WASM32_32 relocation. bfd * elf32-wasm32.c: Add relocation code, two relocs. * reloc.c: Add wasm32 relocations. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. * bfd/po/bfd.pot: Regenerate.
2017-01-23Fix spelling mistakes and typos in the GAS sources.Nick Clifton1-1/+1
PR gas/21072 * asintl.h: Fix spelling mistakes and typos. * atof-generic.c: Likewise. * bit_fix.h: Likewise. * config/atof-ieee.c: Likewise. * config/bfin-defs.h: Likewise. * config/bfin-parse.y: Likewise. * config/obj-coff-seh.h: Likewise. * config/obj-coff.c: Likewise. * config/obj-evax.c: Likewise. * config/obj-macho.c: Likewise. * config/rx-parse.y: Likewise. * config/tc-aarch64.c: Likewise. * config/tc-alpha.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-avr.c: Likewise. * config/tc-bfin.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-cris.c: Likewise. * config/tc-crx.c: Likewise. * config/tc-d10v.c: Likewise. * config/tc-d30v.c: Likewise. * config/tc-dlx.c: Likewise. * config/tc-epiphany.c: Likewise. * config/tc-frv.c: Likewise. * config/tc-hppa.c: Likewise. * config/tc-i370.c: Likewise. * config/tc-i386-intel.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-m32r.c: Likewise. * config/tc-m68hc11.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-mcore.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-mep.h: Likewise. * config/tc-metag.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-msp430.h: Likewise. * config/tc-nds32.c: Likewise. * config/tc-nds32.h: Likewise. * config/tc-nios2.c: Likewise. * config/tc-nios2.h: Likewise. * config/tc-ns32k.c: Likewise. * config/tc-pdp11.c: Likewise. * config/tc-ppc.c: Likewise. * config/tc-pru.c: Likewise. * config/tc-rx.c: Likewise. * config/tc-s390.c: Likewise. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sh.c: Likewise. * config/tc-sh64.c: Likewise. * config/tc-sparc.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-v850.c: Likewise. * config/tc-vax.c: Likewise. * config/tc-visium.c: Likewise. * config/tc-xgate.c: Likewise. * config/tc-xtensa.c: Likewise. * config/tc-z80.c: Likewise. * config/tc-z8k.c: Likewise. * config/te-vms.c: Likewise. * config/xtensa-relax.c: Likewise. * doc/as.texinfo: Likewise. * doc/c-arm.texi: Likewise. * doc/c-hppa.texi: Likewise. * doc/c-i370.texi: Likewise. * doc/c-i386.texi: Likewise. * doc/c-m32r.texi: Likewise. * doc/c-m68k.texi: Likewise. * doc/c-mmix.texi: Likewise. * doc/c-msp430.texi: Likewise. * doc/c-nds32.texi: Likewise. * doc/c-ns32k.texi: Likewise. * doc/c-riscv.texi: Likewise. * doc/c-rx.texi: Likewise. * doc/c-s390.texi: Likewise. * doc/c-tic6x.texi: Likewise. * doc/c-tilegx.texi: Likewise. * doc/c-tilepro.texi: Likewise. * doc/c-v850.texi: Likewise. * doc/c-xgate.texi: Likewise. * doc/c-xtensa.texi: Likewise. * dwarf2dbg.c: Likewise. * ecoff.c: Likewise. * itbl-ops.c: Likewise. * listing.c: Likewise. * macro.c: Likewise. * po/gas.pot: Likewise. * read.c: Likewise. * struc-symbol.h: Likewise. * symbols.h: Likewise. * testsuite/gas/arc/relocs-errors.err: Likewise. * write.c: Likewise.
2016-12-23Regenerate pot files.Tristan Gingold1-3992/+4929
2014-11-04Don't use register keywordAlan Modra1-3933/+4170
* expr.c (expr_symbol_where): Don't use register keyword. * app.c (app_push, app_pop, do_scrub_chars): Likewise. * ecoff.c (add_string, add_ecoff_symbol, add_aux_sym_symint, add_aux_sym_rndx, add_aux_sym_tir, add_procedure, add_file, ecoff_build_lineno, ecoff_setup_ext, allocate_cluster. allocate_scope, allocate_vlinks, allocate_shash, allocate_thash, allocate_tag, allocate_forward, allocate_thead, allocate_lineno_list): Likewise. * frags.c (frag_more, frag_var, frag_variant, frag_wane): Likewise. * input-file.c (input_file_push, input_file_pop): Likewise. * input-scrub.c (input_scrub_push, input_scrub_next_buffer): Likewise. * subsegs.c (subseg_change): Likewise. * symbols.c (colon, symbol_table_insert, symbol_find_or_make) (dollar_label_name, fb_label_name): Likewise. * write.c (relax_align): Likewise. * config/tc-alpha.c (s_alpha_pdesc): Likewise. * config/tc-bfin.c (bfin_s_bss): Likewise. * config/tc-i860.c (md_estimate_size_before_relax): Likewise. * config/tc-m68hc11.c (md_convert_frag): Likewise. * config/tc-m68k.c (m68k_ip, crack_operand): Likewise. (md_convert_frag_1, s_even): Likewise. * config/tc-mips.c (mips_clear_insn_labels): Likewise. * config/tc-mn10200.c (md_begin): Likewise. * config/tc-s390.c (s390_setup_opcodes, md_begin): Likewise. * config/tc-sh.c (sh_elf_cons): Likewise. * config/tc-tic4x.c (tic4x_cons, tic4x_stringer): Likewise. * config/m68k-parse.y (m68k_reg_parse): Likewise. Convert from K&R. (yylex, m68k_ip_op, yyerror): Convert from K&R.
2014-02-10binutils potfiles regenAlan Modra1-3277/+5300
Adds nds32 files to POTFILES.in
2011-10-25bfd:Nick Clifton1-1329/+1701
* Makefile.am (ALL_MACHINES): Add cpu-epiphany.lo . (ALL_MACHINES_CFILES): Add cpu-epiphany.c . (BFD32_BACKENDS): Add elf32-epiphany.lo . (BFD32_BACKENDS_CFILES): Add elf32-epiphany.c . * Makefile.in, bfd-in2.h, configure, libbfd.h: Regenerate. * archures.c (bfd_arch_epiphany): Add. (bfd_mach_epiphany16, bfd_mach_epiphany32): Define. (bfd_epiphany_arch): Declare. (bfd_archures_list): Add &bfd_epiphany_arch. * config.bfd (epiphany-*-elf): New target case. * configure.in (bfd_elf32_epiphany_vec): New target vector case. * reloc.c (BFD_RELOC_EPIPHANY_SIMM8): New relocation. (BFD_RELOC_EPIPHANY_SIMM24, BFD_RELOC_EPIPHANY_HIGH): Likewise. (BFD_RELOC_EPIPHANY_LOW, BFD_RELOC_EPIPHANY_SIMM11): Likewise. (BFD_RELOC_EPIPHANY_IMM11, BFD_RELOC_EPIPHANY_IMM8): Likewise. * targets.c (bfd_elf32_epiphany_vec): Declare. (_bfd_target_vector): Add bfd_elf32_epiphany_vec. * po/SRC-POTFILES.in, po/bfd.pot: Regenerate. * cpu-epiphany.c, elf32-epiphany.c: New files. binutils: * readelf.c (include "elf/epiphany.h") (guess_is_rela, dump_relocation): Handle EM_ADAPTEVA_EPIPHANY. (get_machine_name, is_32bit_abs_reloc, is_32bit_pcrel_reloc): Likewise. (is_16bit_abs_reloc, is_none_reloc): Likewise. * po/binutils.pot: Regenerate. cpu: * cpu/epiphany.cpu, cpu/epiphany.opc: New files. gas: * NEWS: Mention addition of Adapteva Epiphany support. * config/tc-epiphany.c, config/tc-epiphany.h: New files. * Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c . (TARGET_CPU_HFILES): Add config/tc-epiphany.h . * Makefile.in, configure, doc/Makefile.in, po/POTFILES.in: Regenerate. * configure.in: Also set using_cgen for epiphany. * configure.tgt: Handle epiphany. * doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi . * doc/all.texi: Set EPIPHANY. * doc/as.texinfo: Add EPIPHANY-specific text. * doc/c-epiphany.texi: New file. * po/gas.pot: Regenerate. gas/testsuite: * gas/epiphany: New directory. include: * dis-asm.h (print_insn_epiphany): Declare. * elf/epiphany.h: New file. * elf/common.h (EM_ADAPTEVA_EPIPHANY): Define. ld: * NEWS: Mention addition of Adapteva Epiphany support. * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32epiphany.c . (eelf32epiphany.c): New rule. * Makefile.in: Regenerate. * configure.tgt: Handle epiphany-*-elf. * po/ld.pot: Regenerate. * testsuite/ld-srec/srec.exp: xfail epiphany. * emulparams/elf32epiphany.sh: New file. opcodes: * Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h . (TARGET_LIBOPCODES_CFILES): Add epiphany-asm.c, epiphany-desc.c, epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c . (CLEANFILES): Add stamp-epiphany. (EPIPHANY_DEPS): Set. Make CGEN-generated Epiphany files depend on it. (stamp-epiphany): New rule. * Makefile.in, configure, po/POTFILES.in, po/opcodes.pot: Regenerate. * configure.in: Handle bfd_epiphany_arch. * disassemble.c (ARCH_epiphany): Define. (disassembler): Handle bfd_arch_epiphany. * epiphany-asm.c, epiphany-desc.c, epiphany-desc.h: New files. * epiphany-dis.c, epiphany-ibld.c, epiphany-opc.c: Likewise. * epiphany-opc.h: Likewise.
2011-06-02Fix spelling mistakes.Nick Clifton1-1762/+2005
2010-11-05bfd/Tristan Gingold1-3180/+3764
2010-11-05 Tristan Gingold <gingold@adacore.com> * po/bfd.pot: Regenerate binutils/ 2010-11-05 Tristan Gingold <gingold@adacore.com> * po/binutils.pot: Regenerate gas/ 2010-11-05 Tristan Gingold <gingold@adacore.com> * po/gas.pot: Regenerate * po/POTFILES.in: Regenerate gprof/ 2010-11-05 Tristan Gingold <gingold@adacore.com> * po/gprof.pot: Regenerate ld/ 2010-11-05 Tristan Gingold <gingold@adacore.com> * po/ld.pot: Regenerate * po/POTFILES.in: Regenerate opcodes/ 2010-11-05 Tristan Gingold <gingold@adacore.com> * po/opcodes.pot: Regenerate
2010-04-22Updated translation templates.Nick Clifton1-1120/+1126
Updated Bulgarian translation. Updated Finnish translations. Updated French translations. Updated Vietnamese translations.
2009-09-11 * po/bfd.pot: Updated by the Translation project.Nick Clifton1-1/+1
* po/binutils.pot: Updated by the Translation project. * po/gold.pot: Updated by the Translation project. * po/gold.pot: Updated by the Translation project. * po/gprof.pot: Updated by the Translation project. * po/sv.po: Updated Swedish translation. * po/ld.pot: Updated by the Translation project. * po/fi.po: Updated Finnish translation. * po/ld.pot: Updated by the Translation project. * po/fi.po: Updated Finnish translation. Updated sources to compile cleanly with -Wc++-compat: * basic_blocks.c: Add casts. * cg_dfn.c: Add cast. * corefile.c: Add casts. * gmon_io.c: Add casts. * hist.c: Add cast. * source.c: Add cast. * sym_ids.c (struct match): Moved to top level. Updated soruces in ld/* to compile cleanly with -Wc++-compat: * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level. * ldcref.c: Add casts. * ldctor.c: Add casts. * ldexp.c * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level. * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer. * ldlang.h (enum statement_enum): Move to top level. * ldmain.c: Add casts. * ldwrite.c: Add casts. * lexsup.c: Add casts. (enum control_enum): Move to top level. * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer. Updated sources to compile cleanly with -Wc++-compat: * basic_blocks.c: Add casts. * cg_dfn.c: Add cast. * corefile.c: Add casts. * gmon_io.c: Add casts. * hist.c: Add cast. * source.c: Add cast. * sym_ids.c (struct match): Moved to top level. * as.c (main): Call dwarf2_init. * config/obj-elf.c (struct group_list): New field. (build_group_lists): Use hash lookup. (free_section_idx): New function. (elf_frob_file): Adjust. * dwarf2dbg.c (all_segs_hash, last_seg_ptr): New variables. (get_line_subseg): Adjust. (dwarf2_init): New function. * dwarf2dbg.h (dwarf2_init): New declaration.
2009-09-07bfdTristan Gingold1-574/+573
2009-09-07 Tristan Gingold <gingold@adacore.com> * po/SRC-POTFILES.in: Regenerate. * po/bfd.pot: Regenerate. binutils 2009-09-07 Tristan Gingold <gingold@adacore.com> * po/binutils.pot: Regenerate. gas 2009-09-07 Tristan Gingold <gingold@adacore.com> * po/POTFILES.in: Regenerate. * po/gas.pot: Regenerate. gprof 2009-09-07 Tristan Gingold <gingold@adacore.com> * po/gprof.pot: Regenerate. ld 2009-09-07 Tristan Gingold <gingold@adacore.com> * po/ld.pot: Regenerate. opcodes 2009-09-07 Tristan Gingold <gingold@adacore.com> * po/opcodes.pot: Regenerate.
2009-08-26moxie fixes in gas.Ralf Wildenhues1-22/+60
gas/: * Makefile.am (TARGET_CPU_CFILES): Add config/tc-moxie.c. * config/tc-moxie.c (md_assemble): Fix typos in strings. Fix syntax error. * Makefile.in: Regenerate. * po/POTFILES.in: Likewise. * po/gas.pot: Likewise.
2009-08-22dependency tracking in gasRalf Wildenhues1-2444/+3585
gas/: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8 cygnus, add 1.11, foreign and no-dist. (all): Remove now-unneeded dependency upon info. (DIST_SUBDIRS, MKDEP, DEP_INCLUDES, DEP_FLAGS, CLEANFILES) (DEP_FILE_DEPS): Remove variables. (OBJ_FORMAT_CFILES): Add config/obj-multi.c. (OBJ_FORMAT_HFILES): Add config/obj-multi.h. ($(OBJS), ecoff.o): Remove now-unneeded manual dependencies. ($(TARG_CPU_O), $(ATOF_TARG_O), obj-aout.o, obj-coff.o obj-ecoff.o) (obj-elf.o obj-evax.o, obj-fdpicelf.o, obj-multi.o, obj-som.o) (e-mipself.o, e-mipsecoff.o, e-i386aout.o, e-i386coff.o, e-i386elf.o) (e-crisaout.o, e-criself.o, tc-i386.o, xtensa-relax.o): Remove now-unneeded rules. (EXTRA_as_new_SOURCES): Add $(CFILES), $(HFILES), $(TARGET_CPU_CFILES), $(TARGET_CPU_HFILES), $(OBJ_FORMAT_CFILES), $(OBJ_FORMAT_HFILES), $(CONFIG_ATOF_CFILES), $(MULTI_CFILES), so their dependency fragments are picked up in the Makefile. (itbl-lex.c, itbl-ops.o): Remove manual dependencies. (m68k-parse.o, bfin-lex.o, itbl-lex.o, itbl-parse.o, itbl-tops.o) (itbl-test.o): Rewrite using automake-style dependency tracking rules; only list the dependency upon the primary source file, but no included headers. (DEP, DEP1, DEPTC, DEPOBJ, DEP2, dep.sed, dep, dep-in, dep-am): Remove. (mkdep section): Remove. * Makefile.in: Regenerate. * gas/po/POTFILES.in, gas/po/gas.pot: Regenerate.
2009-05-26Update Indonesian translations.Nick Clifton1-2283/+2536
Update translation templates.
2007-11-12 PR gas/5269Nick Clifton1-714/+722
* config/tc-frv.c (md_show_usage): Rewrite usage description to make it easier to translate. * gas/po/gas.pot: Regenerate.
2007-10-18PR gas/5172Nick Clifton1-152/+104
* config/tc-arc.c (md_estimate_size_before_relax): Change error message. (md_convert_frag): Just call abort. * config/tc-i860.c (md_estimate_size_before_relax): Change error message. * config/tc-i860.h (md_convert_frag): Just call abort. * config/tc-ip2k.c (md_estimate_size_before_relax): Change error message. (md_convert_frag): Just call abort. * config/tc-m68k.c (m68k_ip): Do not attempt translation of architecture names.
2007-10-18PR gas/5174Nick Clifton1-409/+409
* config/tc-arm.c: Fix formatting and spelling errors. * gas.pot: Regenerate.
2007-10-18PR gas/5175Nick Clifton1-8/+3
* config/tc-xc16x.c: Fix formatting and internationalization. * gas.pot: Regenerate.
2007-10-17Remove duplicate definitions of the md_atof() functionNick Clifton1-1503/+1478
2007-10-11PR gas/5161Nick Clifton1-16/+654
* config/tc-ia64.c: Allow for translations of error and warning messages. * po/gas.pot: Regenerate.
2007-10-11PR gas/5158Nick Clifton1-1591/+2345
* config/tc-h8300.c (tc_gen_reloc): Allow for translation of error message. * po/gas.pot: Regenerate.
2007-07-02Regenerate files.Alan Modra1-3026/+4140
2005-10-25RegenerateAlan Modra1-2560/+2235
2005-07-14ChangeLog:Jim Blandy1-792/+799
2005-07-14 Jim Blandy <jimb@redhat.com> * configure.in: Add cases for Renesas m32c. * configure: Regenerated. bfd/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for m32c-*-elf (Renesas m32c and m16c). * Makefile.am (ALL_MACHINES): Add cpu-m32c.lo. (ALL_MACHINES_CFILES): Add cpu-m32c.c. (BFD32_BACKENDS): Add elf32-m32c.lo. (BFD32_BACKENDS_CFILES): Add elf32-m32c.c. (cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'. * Makefile.in: Regenerated. * archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New arch and mach codes. (bfd_m32c_arch): New arch info object. (bfd_archures_list): List bfd_m32c_arch. * bfd-in2.h: Regenerated. * config.bfd: Add case for the m32c. * configure.in: Add case for the m32c. * configure: Regenerated. * cpu-m32c.c, elf32-m32c.c: New files. * libbfd.h: Regenerated. * targets.c (bfd_elf32_m32c_vec): Declare. (_bfd_target_vector): List bfd_elf32_m32c_vec. binutils/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> * readelf.c: #include "elf/m32c.h" (guess_is_rela, dump_relocations, get_machine_name): Add cases for EM_M32C. * Makefile.am (readelf.o): Update dependencies. * Makefile.in: Regenerated. cpu/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> * m32c.cpu, m32c.opc: Machine description for the Renesas M32C. gas/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for the Renesas M32C. * Makefile.am (CPU_TYPES): List m32c. (TARGET_CPU_CFILES): List config/tc-m32c.c. (TARGET_CPU_HFILES): List config/tc-m32c.h. * configure.in: Add case for m32c. * configure.tgt: Add cases for m32c and m32c-*-elf. * configure: Regenerated. * config/tc-m32c.c, config/tc-m32c.h: New files. * doc/Makefile.am (CPU_DOCS): Add c-m32c.texi. * doc/Makefile.in: Regenerated. * doc/all.texi: Set M32C. * doc/as.texinfo: Add text for the M32C-specific options and line comment characters, and refer to c-m32c.texi. * doc/c-m32c.texi: New file. include/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> * dis-asm.h (print_insn_m32c): New declaration. include/elf/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for Renesas M32C and M16C. * common.h (EM_M32C): New machine number. * m32c.h: New file. ld/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for the Renesas M32C and M16C. * Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o. (eelf32m32c.c): New target. * Makefile.in: Regenerated. * configure.tgt: Add case for m32c-*-elf. * emulparams/elf32m32c.sh: New file. opcodes/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for the Renesas M32C and M16C. * m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New. * m32c-desc.h, m32c-opc.h: New. * Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h. (CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c. (ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo. (CLEANFILES): List stamp-m32c. (M32C_DEPS): List stamp-m32c, if CGEN_MAINT. (CGEN_CPUS): Add m32c. (m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c) (m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS. (m32c_opc_h): New variable. (stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo) (m32c-opc.lo): New rules. * Makefile.in: Regenerated. * configure.in: Add case for bfd_m32c_arch. * configure: Regenerated. * disassemble.c (ARCH_m32c): New. [ARCH_m32c]: #include "m32c-desc.h". (disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c. (disassemble_init_for_target) [ARCH_m32c]: Same. * cgen-ops.h, cgen-types.h: New files. * Makefile.am (HFILES): List them. * Makefile.in: Regenerated.
2005-06-07gas:Zack Weinberg1-2848/+2837
* cgen.c, cgen.h, tc.h, write.c, config/obj-coff.c * config/tc-a29k.c, config/tc-alpha.c, config/tc-alpha.h * config/tc-arc.c, config/tc-arc.h, config/tc-arm.c * config/tc-arm.h, config/tc-avr.c, config/tc-avr.h * config/tc-cris.c, config/tc-crx.c, config/tc-d10v.c * config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h * config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.h * config/tc-frv.c, config/tc-frv.h, config/tc-h8300.c * config/tc-h8500.c, config/tc-hppa.c, config/tc-hppa.h * config/tc-i370.c, config/tc-i370.h, config/tc-i386.c * config/tc-i386.h, config/tc-i860.c, config/tc-i860.h * config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c * config/tc-ip2k.c, config/tc-ip2k.h, config/tc-iq2000.c * config/tc-iq2000.h, config/tc-m32r.c, config/tc-m32r.h * config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c * config/tc-m68k.h, config/tc-m88k.c, config/tc-maxq.c * config/tc-mcore.c, config/tc-mcore.h, config/tc-mips.c * config/tc-mips.h, config/tc-mmix.c, config/tc-mn10200.c * config/tc-mn10300.c, config/tc-msp430.c, config/tc-ns32k.c * config/tc-openrisc.h, config/tc-or32.c, config/tc-or32.h * config/tc-pdp11.c, config/tc-pj.c, config/tc-pj.h * config/tc-ppc.c, config/tc-ppc.h, config/tc-s390.c * config/tc-s390.h, config/tc-sh64.c, config/tc-sh.c * config/tc-sh.h, config/tc-sparc.c, config/tc-sparc.h * config/tc-tahoe.c, config/tc-tic30.c, config/tc-tic4x.c * config/tc-tic54x.c, config/tc-tic80.c, config/tc-v850.c * config/tc-v850.h, config/tc-vax.c, config/tc-vax.h * config/tc-w65.c, config/tc-xstormy16.c, config/tc-xstormy16.h * config/tc-xtensa.c, config/tc-z8k.c: Replace all instances of the string "_apply_fix3" with "_apply_fix". * po/POTFILES.in, po/gas.pot: Regenerate. bfd: * coff-i386.c: Change md_apply_fix3 to md_apply_fix in comment. cgen: * doc/porting.texi: Change all mention of md_apply_fix3 and gas_cgen_md_apply_fix3 to md_apply_fix and gas_cgen_md_apply_fix respectively.
2005-03-05Regenerate .pot filesAlan Modra1-2357/+2740
2004-09-17 * Makefile.am: Run "make dep-am".Alan Modra1-1725/+1995
* Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. * po/gas.pot: Regenerate.
2004-03-19 * Makefile.am: Run "make dep-am".Alan Modra1-2016/+2518
* Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * config.in: Regenerate. * po/gas.pot: Regenerate.
2003-07-17Update translationsNick Clifton1-206/+206
generated by cgit v1.1 at 2024-11-19 02:28:57 +0000