| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Targets such as xtensa incur a much higher overhead to resolve
location view numbers than e.g. x86, because the expressions used to
compute view numbers cannot be resolved soon enough.
Each view number is computed by incrementing the previous view, if
they are both at the same address, or by resetting it to zero
otherwise. If PV is the previous view number, PL is its location, and
NL is the location of the next view, its number is computed by
evaluating NV = !(NL > PL) * (PV + 1).
set_or_check_view uses resolve_expression to decide whether portions
of this expression can be simplified to constants. The (NL > PL)
subexpression is one that can often be resolved to a constant,
breaking chains of view number computations at instructions of nonzero
length, but not after alignment that might be unnecessary.
Alas, when nearly every frag ends with a relaxable instruction,
frag_offset_fixed_p will correctly fail to determine a known offset
between two unresolved addresses in neighboring frags, so the
unresolved symbolic operation will be constructed and used in the
computation of most view numbers. This results in very deep
expressions.
As view numbers get referenced in location view lists, each operand in
the list goes through symbol_clone_if_forward_ref, which recurses on
every subexpression. If each view number were to be referenced, this
would exhibit O(n^2) behavior, where n is the depth of the view number
expressions, i.e., the length of view number sequences without an
early resolution that cuts the expression short.
This patch enables address compares used by view numbering to be
resolved even when exact offsets are not known, using new logic to
determine when the location either remained the same or changed for
sure, even with the possibility of relaxation. This enables most view
number expressions to be resolved with a small, reasonable depth.
PR gas/24444
* frags.c (frag_gtoffset_p): New.
* frags.h (frag_gtoffset_p): Declare it.
* expr.c (resolve_expression): Use it.
|
|
The field only stores unsigned values, so let's make it unsigned to
stop people worrying about the possibility of negative values.
* frags.h (struct frag <fr_fix>): Use unsigned type.
* frags.c (frag_new): Assert that current size exceeds
old_frags_var_max_size.
* ehopt.c (get_cie_info): Adjust for unsigned fr_fix.
* listing.c (calc_hex): Likewise.
* write.c (cvt_frag_to_fill, write_relocs): Likewise.
* config/tc-arc.c (md_convert_frag): Likewise.
* config/tc-avr.c (avr_patch_gccisr_frag): Likewise.
* config/tc-mips.c (md_convert_frag): Likewise.
* config/tc-rl78.c (md_convert_frag): Likewise.
* config/tc-rx.c (md_convert_frag): Likewise.
* config/tc-sparc.c (md_apply_fix): Likewise.
* config/tc-xtensa.c (next_instrs_are_b_retw): Likewise.
(unrelaxed_frag_min_insn_count, unrelaxed_frag_has_b_j): Likewise.
|
|
ommit 3ae729d5a4f63740ed9a778960b17c2912b0bbdd
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Mar 7 04:18:45 2018 -0800
x86: Rewrite NOP generation for fill and alignment
increased MAX_MEM_FOR_RS_ALIGN_CODE to 4095 which resulted in increase
of assembler time and memory usage by 5 times for inputs with many
.p2align directives, which is typical for LTO output. This patch passes
max_bytes to TC_FRAG_INIT so that MAX_MEM_FOR_RS_ALIGN_CODE can be set
as needed and tracked by backend it so that HANDLE_ALIGN can check the
maximum alignment for each rs_align_code frag. Wall time to assemble
the same cc1plus.s:
before:
423.78user 0.89system 7:05.71elapsed 99%CPU
after:
102.35user 0.27system 1:42.89elapsed 99%CPU
PR gas/24165
* frags.c (frag_var_init): Pass max_chars to TC_FRAG_INIT as
max_bytes.
* config/tc-aarch64.h (TC_FRAG_INIT): Add and pass max_bytes to
aarch64_init_frag.
* /config/tc-arm.h (TC_FRAG_INIT): And and pass max_bytes to
arm_init_frag.
* config/tc-avr.h (TC_FRAG_INIT): And and ignore max_bytes.
* config/tc-ia64.h (TC_FRAG_INIT): Likewise.
* config/tc-mmix.h (TC_FRAG_INIT): Likewise.
* config/tc-nds32.h (TC_FRAG_INIT): Likewise.
* config/tc-ns32k.h (TC_FRAG_INIT): Likewise.
* config/tc-rl78.h (TC_FRAG_INIT): Likewise.
* config/tc-rx.h (TC_FRAG_INIT): Likewise.
* config/tc-score.h (TC_FRAG_INIT): Likewise.
* config/tc-tic54x.h (TC_FRAG_INIT): Likewise.
* config/tc-tic6x.h (TC_FRAG_INIT): Likewise.
* config/tc-xtensa.h (TC_FRAG_INIT): Likewise.
* config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Set to
(alignment ? ((1 << alignment) - 1) : 1)
(i386_tc_frag_data): Add max_bytes.
(TC_FRAG_INIT): Add and track max_bytes.
(HANDLE_ALIGN): Replace MAX_MEM_FOR_RS_ALIGN_CODE with
fragP->tc_frag_data.max_bytes.
* doc/internals.texi: Update TC_FRAG_TYPE with max_bytes.
|
|
|
|
|
|
gas/
* as.c (main): Properly pluralize messages.
* frags.c (frag_grow): Likewise.
* read.c (emit_expr_with_reloc, emit_expr_fix): Likewise.
(parse_bitfield_cons): Likewise.
* write.c (fixup_segment, compress_debug, write_contents): Likewise.
(relax_segment): Likewise.
* config/tc-arm.c (s_arm_elf_cons): Likewise.
* config/tc-cr16.c (l_cons): Likewise.
* config/tc-i370.c (i370_elf_cons): Likewise.
* config/tc-m68k.c (m68k_elf_cons): Likewise.
* config/tc-msp430.c (msp430_operands): Likewise.
* config/tc-s390.c (s390_elf_cons, s390_literals): Likewise.
* config/tc-mcore.c (md_apply_fix): Likewise.
* config/tc-tic54x.c (md_assemble): Likewise.
* config/tc-xtensa.c (xtensa_elf_cons): Likewise.
(xg_expand_assembly_insn): Likewise.
* config/xtensa-relax.c (build_transition): Likewise.
ld/
* ldlang.c (lang_size_sections_1): Properly pluralize messages.
(lang_check_section_addresses): Likewise.
|
|
|
|
* output-file.c (output_file_create): Make file name argument const.
(output_file_close): Likewise.
* output-file.h (output_file_create): Adjust.
(output_file_close): Likewise.
* depend.c (quote_string_for_make): Make src argument const char *.
(register_dependency): Likewise.
(wrap_output): Likewise.
* as.h (register_dependency): Adjust.
* config/tc-xtensa.c (finish_vinsn): Remove unnecessary calls to
as_where ();
* symbols.c (S_SET_EXTERNAL): Likewise.
* input-scrub.c (as_where): Return the file name.
* as.h (as_where): Adjust prototype.
* app.c (do_scrub_chars): Adjust.
* cond.c (s_elseif): Likewise.
(s_else): Likewise.
(initialize_cframe): Likewise.
* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* config/tc-aarch64.c (output_info): Likewise.
* config/tc-ia64.c (md_assemble): Likewise.
(dot_alias): Likewise.
* config/tc-m68k.c (m68k_frob_label): Likewise.
* config/tc-mmix.c (s_bspec): Likewise.
(mmix_handle_mmixal): Likewise.
* config/tc-rx.c (rx_include): Likewise.
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
(tic54x_adjust_symtab): Likewise.
* config/tc-xtensa.c (directive_push): Likewise.
(xtensa_sanity_check): Likewise.
(xtensa_relax_frag): Likewise.
(md_convert_frag): Likewise.
(tinsn_to_slotbuf): Likewise.
* dwarf2dbg.c (dwarf2_where): Likewise.
* ecoff.c (add_file): Likewise.
(ecoff_generate_asm_lineno): Likewise.
* expr.c (make_expr_symbol): Likewise.
* frags.c (frag_new): Likewise.
(frag_var_init): Likewise.
* listing.c (listing_newline): Likewise.
* messages.c (identify): Likewise.
(as_show_where): Likewise.
(as_warn_internal): Likewise.
(as_bad_internal): Likewise.
* read.c (s_irp): Likewise.
(s_macro): Likewise.
(s_reloc): Likewise.
* stabs.c (stabs_generate_asm_file): Likewise.
(stabs_generate_asm_lineno): Likewise.
(stabs_generate_asm_func): Likewise.
* write.c (fix_new_internal): Likewise.
* as.h (PRINTF_WHERE_LIKE): Make file name argument const.
(as_warn_value_out_of_range): Adjust prototype.
(as_bad_value_out_of_range): Adjust prototype.
* messages.c (identify): Make file name argument const char *.
(as_warn_internal): Likewise.
(as_warn_where): Likewise.
(as_bad_internal): Likewise.
(as_bad_where): Likewise.
(as_internal_value_out_of_range): Likewise.
(as_warn_value_out_of_range): Likewise.
(as_bad_value_out_of_range): Likewise.
* as.h (found_comment_file): Change type to const char *.
* cond.c (file_line::file): Likewise.
* config/obj-coff.c (obj_coff_init_stab_section): Make variable const.
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* config/tc-aarch64.c (output_info): Likewise.
* config/tc-alpha.c (insert_operand): Likewise.
* config/tc-arc.c (insert_operand): Likewise.
* config/tc-d30v.c (check_size): Likewise.
* config/tc-ia64.c (struct alias): Likewise.
* config/tc-m68k.c (struct label_line): Likewise.
* config/tc-mcore.c (md_apply_fix): Likewise.
* config/tc-microblaze.c (md_estimate_size_before_relax): Likewise.
* config/tc-mips.c (mips16_immed): Likewise.
* config/tc-mmix.c (mmix_handle_mmixal): Likewise.
* config/tc-ppc.c (ppc_insert_operand): Likewise.
* config/tc-rx.c (rx_include): Likewise.
* config/tc-s390.c (s390_insert_operand): Likewise.
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
(tic54x_adjust_symtab): Likewise.
* config/tc-tilegx.c (insert_operand): Likewise.
(apply_special_operator): Likewise.
* config/tc-tilepro.c (insert_operand): Likewise.
* config/tc-xtensa.c (directive_push): Likewise.
* ecoff.c (add_file): Likewise.
(ecoff_generate_asm_lineno): Likewise.
* listing.c (listing_newline): Likewise.
* read.c (s_irp): Likewise.
* write.c (install_reloc): Likewise.
* write.h (struct fix): Likewise.
* input-file.c (file_name): Change type to const char *.
(saved_file::file_name): Likewise.
(input_file_open): Change type of argument to const char *.
* input-file.h (input_file_open): Adjust.
* input-scrub.c (logical_input_file): change type to const char *.
(physical_input_file): Likewise.
(struct input_save): Adjust.
(input_scrub_push): Adjust.
(input_scrub_begin): Adjust.
(as_where): Adjust.
* input-scrub.c (input_scrub_new_file): Make file name argument const.
(input_scrub_include_file): Likewise.
(new_logical_line_flags): Likewise.
(new_logical_line): Likewise.
* as.h: Adjust.
* frags.h (struct frag): Change type of fr_file to const char *.
* expr.c (expr_symbol_where): Change type of file argument to
const char **.
* expr.h (expr_symbol_where): Likewise.
* config/tc-i370.c (md_apply_fix): adjust.
* config/tc-mmix.c (mmix_md_end): Likewise.
* config/tc-ppc.c (md_apply_fix): Likewise.
* config/tc-s390.c (md_apply_fix): Likewise.
* symbols.c (report_op_error): Likewise.
(resolve_symbol_value): Likewise.
* config/tc-ia64.c (slot::src_file): Change type to const char *.
(rsrc::file): Likewise.
* config/tc-xtensa.c (xtensa_sanity_check): Change type of variable to
const char *.
(xtensa_relax_frag): Likewise.
(md_convert_frag): Likewise.
(tinsn_to_slotbuf): Likewise.
* expr.c (expr_symbol_line): Likewise.
* macro.c (define_macro): Likewise.
* macro.h (macro_struct): Likewise.
* messages.c (as_show_where): Likewise.
* read.c (s_macro): Likewise.
* stabs.c (stabs_generate_asm_file): Likewise.
(generate_asm_file): Likewise.
(stabs_generate_asm_lineno): Likewise.
* write.h (struct reloc_list): Likewise.
* input-scrub.c (as_where): Change return type to const char *.
* as.h (as_wheree): Adjust.
|
|
|
|
|
|
* expr.c (expr_symbol_where): Don't use register keyword.
* app.c (app_push, app_pop, do_scrub_chars): Likewise.
* ecoff.c (add_string, add_ecoff_symbol, add_aux_sym_symint,
add_aux_sym_rndx, add_aux_sym_tir, add_procedure, add_file,
ecoff_build_lineno, ecoff_setup_ext, allocate_cluster.
allocate_scope, allocate_vlinks, allocate_shash,
allocate_thash, allocate_tag, allocate_forward, allocate_thead,
allocate_lineno_list): Likewise.
* frags.c (frag_more, frag_var, frag_variant, frag_wane): Likewise.
* input-file.c (input_file_push, input_file_pop): Likewise.
* input-scrub.c (input_scrub_push, input_scrub_next_buffer): Likewise.
* subsegs.c (subseg_change): Likewise.
* symbols.c (colon, symbol_table_insert, symbol_find_or_make)
(dollar_label_name, fb_label_name): Likewise.
* write.c (relax_align): Likewise.
* config/tc-alpha.c (s_alpha_pdesc): Likewise.
* config/tc-bfin.c (bfin_s_bss): Likewise.
* config/tc-i860.c (md_estimate_size_before_relax): Likewise.
* config/tc-m68hc11.c (md_convert_frag): Likewise.
* config/tc-m68k.c (m68k_ip, crack_operand): Likewise.
(md_convert_frag_1, s_even): Likewise.
* config/tc-mips.c (mips_clear_insn_labels): Likewise.
* config/tc-mn10200.c (md_begin): Likewise.
* config/tc-s390.c (s390_setup_opcodes, md_begin): Likewise.
* config/tc-sh.c (sh_elf_cons): Likewise.
* config/tc-tic4x.c (tic4x_cons, tic4x_stringer): Likewise.
* config/m68k-parse.y (m68k_reg_parse): Likewise. Convert from K&R.
(yylex, m68k_ip_op, yyerror): Convert from K&R.
|
|
Use size_t in a few places involved with obstacks, and don't include
obstack.h in files that don't use obstacks.
gas/
* config/bfin-parse.y: Don't include obstack.h.
* config/obj-aout.c: Likewise.
* config/obj-coff.c: Likewise.
* config/obj-som.c: Likewise.
* config/tc-bfin.c: Likewise.
* config/tc-i960.c: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-tic4x.c: Likewise.
* expr.c: Likewise.
* listing.c: Likewise.
* config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
* config/tc-aarch64.c (symbol_locate): Likewise.
* config/tc-arm.c (symbol_locate): Likewise.
* config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
* config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
(s3_build_dependency_insn_hsh): Likewise.
* config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
(s7_build_dependency_insn_hsh): Likewise.
* frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
(frag_new): Make parameter a size_t.
(frag_var_init): Make max_chars and var parameters size_t.
(frag_var, frag_variant): Likewise.
(frag_room): Return a size_t.
(frag_align_pattern): Make n_fill parameter a size_t.
* frags.h: Update function prototypes.
* symbols.c (save_symbol_name): Make name_length a size_t.
|
|
branches.
* tc-xtensa.c (xtensa_check_frag_count, xtensa_create_trampoline_frag)
(xtensa_maybe_create_trampoline_frag, init_trampoline_frag)
(find_trampoline_seg, search_trampolines, get_best_trampoline)
(check_and_update_trampolines, add_jump_to_trampoline)
(dump_trampolines): New function.
(md_parse_option): Add cases for --[no-]trampolines options.
(md_assemble, finish_vinsn, xtensa_end): Add call to
xtensa_check_frag_count.
(xg_assemble_vliw_tokens): Add call to
xtensa_maybe_create_trampoline_frag.
(xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
(relax_frag_immed): Relax jump instructions that cannot reach its
target.
* tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New relax
state.
* as.texinfo: Document --[no-]trampolines command-line options.
* c-xtensa.texi: Document trampolines relaxation and command line
options.
* frags.c (get_frag_count, clear_frag_count): New function.
(frag_alloc): Increment totalfrags counter.
* frags.h (get_frag_count, clear_frag_count): New function.
* all.exp: Add test for trampoline relaxation.
* trampoline.d: Trampoline relaxation expected dump.
* trampoline.s: Trampoline relaxation test source.
|
|
|
|
below the default.
|
|
* frags.c (frag_offset_fixed_p): Change type of "offset" to offsetT.
* expr.c (expr, resolve_expression): Likewise for frag_off var.
|
|
* frags.h (bss_address_frag): Delete
(predefined_address_frag): New.
* frags.c (frag_init): Init predefined_address_frag. Delete ref
to bss_addres_frag.
* symbols.c (S_CAN_BE_REDEFINED): New function.
* symbols.h (S_CAN_BE_REDEFINED): Declare.
* read.c (assign_symbol): Use S_CAN_BE_REDEFINED.
|
|
* frags.c (frag_grow): Simplify the code.
|
|
* frags.c (frag_var_init): New function.
(frag_var): Call frag_var_init to initialize.
(frag_variant): Ditto.
|
|
* frags.c (frag_grow): Revert previous patch.
|
|
* frags.c (frag_grow): Simplify the code.
|
|
* po/binutils.pot: Updated by the Translation project.
* po/gold.pot: Updated by the Translation project.
* po/gold.pot: Updated by the Translation project.
* po/gprof.pot: Updated by the Translation project.
* po/sv.po: Updated Swedish translation.
* po/ld.pot: Updated by the Translation project.
* po/fi.po: Updated Finnish translation.
* po/ld.pot: Updated by the Translation project.
* po/fi.po: Updated Finnish translation.
Updated sources to compile cleanly with -Wc++-compat:
* basic_blocks.c: Add casts.
* cg_dfn.c: Add cast.
* corefile.c: Add casts.
* gmon_io.c: Add casts.
* hist.c: Add cast.
* source.c: Add cast.
* sym_ids.c (struct match): Moved to top level.
Updated soruces in ld/* to compile cleanly with -Wc++-compat:
* ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
* ldcref.c: Add casts.
* ldctor.c: Add casts.
* ldexp.c
* ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
* ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
* ldlang.h (enum statement_enum): Move to top level.
* ldmain.c: Add casts.
* ldwrite.c: Add casts.
* lexsup.c: Add casts. (enum control_enum): Move to top level.
* mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
Updated sources to compile cleanly with -Wc++-compat:
* basic_blocks.c: Add casts.
* cg_dfn.c: Add cast.
* corefile.c: Add casts.
* gmon_io.c: Add casts.
* hist.c: Add cast.
* source.c: Add cast.
* sym_ids.c (struct match): Moved to top level.
* as.c (main): Call dwarf2_init.
* config/obj-elf.c (struct group_list): New field.
(build_group_lists): Use hash lookup.
(free_section_idx): New function.
(elf_frob_file): Adjust.
* dwarf2dbg.c (all_segs_hash, last_seg_ptr): New variables.
(get_line_subseg): Adjust.
(dwarf2_init): New function.
* dwarf2dbg.h (dwarf2_init): New declaration.
|
|
|
|
gas/config/atof-ieee.c, gas/config/obj-aout.c,
gas/config/obj-coff.c, gas/config/obj-ecoff.c,
gas/config/obj-elf.c, gas/config/obj-som.c, gas/config/tc-alpha.c,
gas/config/tc-arc.c, gas/config/tc-arm.c, gas/config/tc-cr16.c,
gas/config/tc-cris.c, gas/config/tc-crx.c, gas/config/tc-d30v.c,
gas/config/tc-dlx.c, gas/config/tc-hppa.c, gas/config/tc-i370.c,
gas/config/tc-i386-intel.c, gas/config/tc-i386.c,
gas/config/tc-i860.c, gas/config/tc-i960.c, gas/config/tc-ia64.c,
gas/config/tc-iq2000.c, gas/config/tc-m32c.c,
gas/config/tc-m32r.c, gas/config/tc-m68hc11.c,
gas/config/tc-m68k.c, gas/config/tc-maxq.c, gas/config/tc-mcore.c,
gas/config/tc-mep.c, gas/config/tc-mips.c, gas/config/tc-mmix.c,
gas/config/tc-mn10300.c, gas/config/tc-moxie.c,
gas/config/tc-ns32k.c, gas/config/tc-pj.c, gas/config/tc-ppc.c,
gas/config/tc-s390.c, gas/config/tc-score.c,
gas/config/tc-score7.c, gas/config/tc-sh.c, gas/config/tc-sparc.c,
gas/config/tc-spu.c, gas/config/tc-tic30.c, gas/config/tc-vax.c,
gas/config/tc-xtensa.c, gas/config/xtensa-relax.c,
gas/dw2gencfi.c, gas/dwarf2dbg.c, gas/ehopt.c, gas/expr.c,
gas/frags.c, gas/input-file.c, gas/read.c, gas/sb.c,
gas/subsegs.c, gas/symbols.c, gas/write.c: Change the name of the
gas macro `assert' to `gas_assert'.
|
|
|
|
|
|
* frags.h (frag_offset_fixed_p): Ditto.
|
|
second scan.
|
|
* frags.c (frag_offset_fixed_p): New function.
* frags.h (frag_offset_fixed_p): Declare.
* expr.c (expr): Use frag_offset_fixed_p when simplifying subtraction.
(resolve_expression): Likewise.
|
|
* frags.c (frag_grow): Don't be too greedy in allocating memory.
* config/tc-hppa.c (pa_block): Check arguments to .block[z].
gas/testsuite/
* gas/hppa/parse/block1.s: Use official limit (0x3fffffff) for
.block.
|
|
|
|
|
|
* frags.c (frag_room): New function.
* doc/internals.texi: Document it.
|
|
* emul.h: Likewise.
* expr.c: Likewise.
* expr.h: Likewise.
* flonum-copy.c: Likewise.
* flonum-mult.c: Likewise.
* flonum.h: Likewise.
* frags.c: Likewise.
* frags.h: Likewise.
|
|
(frag_alloc_check): ..here. New function.
(frag_append_1_char): Call frag_alloc_check.
|
|
|
|
|
|
final period or newline, don't say "ignored" or "zero assumed" for
as_bad messages. In some cases, change the wording to that used
elsewhere for similar messages.
* app.c, as.c, atof-generic.c, cgen.c, cond.c, depend.c, dwarf2dbg.c,
ecoff.c, expr.c, frags.c, input-file.c, input-scrub.c, listing.c,
output-file.c, stabs.c, subsegs.c, symbols.c, write.c: Likewise.
* ecoff.c (ecoff_directive_end): Test for missing name by
comparing input line pointers rather than reading string.
(ecoff_directive_ent): Likewise.
* read.c (s_set): Likewise.
(s_align): Report a warning rather than an error for
alignment too large.
(s_comm): Check for missing symbol name.
(s_lcomm_internal): Likewise.
(s_lsym): Likewise.
(s_globl): Use is_end_of_line instead of looking for '\n'.
(s_lcomm_internal): Likewise.
(ignore_rest_of_line): Report a warning rather than an error.
|
|
|
|
* frags.c (NOP_OPCODE): Move default from read.c.
(MAX_MEM_FOR_RS_ALIGN_CODE): New default.
(frag_align_code): New.
* frags.h (frag_align_code): Declare.
* read.c (NOP_OPCODE): Remove.
(do_align): Use frag_align_code.
* write.c (NOP_OPCODE): Remove.
(get_recorded_alignment): New.
(cvt_frag_to_fill): Handle rs_align_test.
(relax_segment): Likewise.
(subsegs_finish): Align last subseg in section to the
section alignment. Use frag_align_code.
* write.h (get_recorded_alignment): Declare.
* config/obj-coff.c (size_section): Handle rs_align_test.
(fill_section, fixup_mdeps): Likewise.
(write_object_file): Use frag_align_code.
* config/tc-alpha.c (alpha_align): Use frag_align_code.
(alpha_handle_align): New.
* config/tc-alpha.h (HANDLE_ALIGN): New.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-i386.h (md_do_align): Use frag_align_code.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-ia64.c (ia64_md_do_align): Don't do code alignment.
(ia64_handle_align): New.
* config/tc-ia64.h (HANDLE_ALIGN): New.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-m32r.c (m32r_do_align): Remove.
(m32r_handle_align): New.
(fill_insn): Use frag_align_code.
* config/tc-m32r.h (md_do_align): Remove.
(HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-m88k.c, config/tc-m88k.h: Similarly.
* config/tc-mips.c, config/tc-mips.h: Similarly.
* config/tc-sh.c (sh_cons_align): Use rs_align_test.
(sh_handle_align): Likewise. Handle rs_align_code.
(sh_do_align): Remove.
* config/tc-sh.h (md_do_align): Remove.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-sparc.c (sparc_cons_align): Use rs_align_test.
(sparc_handle_align): Likewise. Handle rs_align_code.
* config/tc-sparc.h (md_do_align): Remove.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
|
|
* frags.c: Fix formatting.
* macro.c: Likewise.
|
|
|
|
|
|
md_estimate_size_before_relax, replacing old kludge.
|
|
it now compiles even if it doesn't work too well.
|
|
|
|
|
