aboutsummaryrefslogtreecommitdiff
path: root/gas/expr.h
AgeCommit message (Collapse)AuthorFilesLines
2024-01-04Update year range in copyright notice of binutils filesAlan Modra1-1/+1
Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out */po/*.pot which we don't update frequently.
2023-05-12gas: equates of registersJan Beulich1-0/+1
There are two problems: symbol_equated_p() doesn't recognize equates of registers, and S_CAN_BE_REDEFINED() goes by section rather than by expression type. Both together undermine .eqv and .equiv clearly meaning to guard the involved symbols against re-definition (both ways). To compensate pseudo_set() now using O_symbol and S_CAN_BE_REDEFINED() now checking for O_register, - for targets creating register symbols through symbol_{new,create}() -> symbol_init() -> S_SET_VALUE() (alpha, arc, dlx, ia64, m68k, mips, mmix, tic4x, tic54x, plus anything using cgen or itbl-ops), have symbol_init() set their expressions to O_register, - x86'es parse_register() also can't go by section anymore when trying to "look through" equates; probably symbol_equated_p() should have been used there from the beginning, if only that had worked for equates of registers, - various targets need to "look through" equates when parsing insn operands (which also helps transitive forward equates); perhaps even more ought to, but many don't look to consider the possibility of register equates in the first place. This was uncovered by code reported in PR gas/30274 (duplicating PR gas/30272), except that there .eqv was used when really .equ was meant. Therefore that bug report is addressed here only in so far as gas wouldn't crash anymore; the code there still won't assemble successfully, just that now the issues there are properly diagnosed.
2023-03-17gas: apply md_register_arithmetic also to unary '+'Jan Beulich1-1/+1
Even a unary '+' has to be considered arithmetic; at least on x86 in Intel Syntax mode otherwise bogus insn operands may be accepted. Convert this specific case to binary + (i.e. 0 + <register>). (An implication is that md_operator(,1,) would need to deal with arch- specific equivalents of unary '+' is a similar way, if such an arch- specific variant would be specified in the first place.) To avoid duplicating what make_expr_symbol() does to construct a constant-zero expression, simply make its previously local variable a file-scope static one. This way there's also no need to invoke clean_up_expression().
2023-01-16Tidy gas/expr.c static stateAlan Modra1-0/+1
* expr.c (seen, nr_seen): Make file scope. (expr_begin): Clear seen, nr_seen, and expr_symbol_lines. (expr_end): New function. * expr.h (expr_end): Declare. * output-file.c (output_file_close): Call expr_end. * config/tc-hppa.c (expr_end): Rename to expr_parse_end. * config/tc-mips.c: Likewise. * config/tc-riscv.c: Likewise. * config/tc-sparc.c: Likewise.
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-04-07Add support for COFF secidx relocationsMark Harmstone1-20/+20
bfd * coff-i386.c (in_reloc_p): Add R_SECTION. (howto_table): Add R_SECTION. (coff_pe_i386_relocation_section): Add support for R_SECTION. (coff_i386_reloc_type_lookup): Add support for BFD_RELOC_16_SECCIDX. * coff-x86_64.c (in_reloc_p): Add R_SECTION. (howto_table): Add R_SECTION. (coff_pe_amd64_relocation_section): Add support for R_SECTION. (coff_amd64_reloc_type_lookup): Add support for BFD_RELOC_16_SECCIDX. * reloc.c: Add BFD_RELOC_16_SECIDX. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas * config/tc-i386.c (pe_directive_secidx): New function. (md_pseudo_table): Add support for secidx. (x86_cons_fix_new): Likewise. (tc_gen_reloc): Likewise. * expr.c (op_rank): Add O_secidx. * expr.h (operatorT): Likewise. * symbols.c (resolve_symbol_value): Add support for O_secidx. * testsuite/gas/i386/secidx.s: New test source file. * testsuite/gas/i386/secidx.d: New test driver file. * testsuite/gas/i386/i386.exp: Run new test. include * coff/i386.h: Define R_SECTION. * coff/x86_64.h: Likewise. ld * testsuite/ld-pe/secidx1.s: New test source file. * testsuite/ld-pe/secidx2.s: New test source file. * testsuite/ld-pe/secidx.d: New test driver file. * testsuite/ld-pe/secidx_64.d: New test driver file. * testsuite/ld-pe/pe.exp: Add new tests.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-04-12Power10 bignum operandsAlan Modra1-0/+2
When built on a 32-bit host without --enable-64-bit-bfd, powerpc-linux and other 32-bit powerpc targeted binutils fail to assemble some power10 prefixed instructions with 34-bit fields. A typical error seen when running the testsuite is .../gas/testsuite/gas/ppc/prefix-pcrel.s:10: Error: bignum invalid In practice this doesn't matter for addresses: 32-bit programs don't need or use the top 2 bits of a d34 field when calculating addresses. However it may matter when loading or adding 64-bit constants with paddi. A power10 processor in 32-bit mode still has 64-bit wide GPRs. So this patch enables limited support for O_big PowerPC operands, and corrects sign extension of 32-bit constants using X_extrabit. * config/tc-ppc.c (insn_validate): Use uint64_t for operand values. (md_assemble): Likewise. Handle bignum operands. (ppc_elf_suffix): Handle O_big. Remove unnecessary input_line_pointer check. * expr.c: Delete unnecessary forward declarations. (generic_bignum_to_int32): Return uint32_t. (generic_bignum_to_int64): Return uint64_t. Compile always. (operand): Twiddle X_extrabit for unary '~'. Set X_unsigned and clear X_extrabit for unary '!'. * expr.h (generic_bignum_to_int32): Declare. (generic_bignum_to_int64): Declare. * testsuite/gas/ppc/prefix-pcrel.s, * testsuite/gas/ppc/prefix-pcrel.d: Add more instructions.
2021-03-31Use bool in gasAlan Modra1-1/+1
* as.h (POISON_BFD_BOOLEAN): Define. * as.c, * as.h, * atof-generic.c, * config/atof-ieee.c, * config/bfin-aux.h, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-elf.h, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arc.h, * config/tc-arm.c, * config/tc-arm.h, * config/tc-avr.c, * config/tc-avr.h, * config/tc-bfin.c, * config/tc-bfin.h, * config/tc-bpf.c, * config/tc-cris.c, * config/tc-csky.c, * config/tc-csky.h, * config/tc-d10v.c, * config/tc-d10v.h, * config/tc-d30v.c, * config/tc-d30v.h, * config/tc-dlx.c, * config/tc-dlx.h, * config/tc-epiphany.c, * config/tc-epiphany.h, * config/tc-fr30.c, * config/tc-fr30.h, * config/tc-frv.c, * config/tc-frv.h, * config/tc-ft32.c, * config/tc-ft32.h, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386-intel.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-iq2000.h, * config/tc-lm32.c, * config/tc-lm32.h, * config/tc-m32c.c, * config/tc-m32c.h, * config/tc-m32r.c, * config/tc-m32r.h, * config/tc-m68hc11.c, * config/tc-m68k.c, * config/tc-mcore.c, * config/tc-mcore.h, * config/tc-mep.c, * config/tc-mep.h, * config/tc-metag.c, * config/tc-metag.h, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mips.h, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-mn10300.h, * config/tc-moxie.c, * config/tc-msp430.c, * config/tc-msp430.h, * config/tc-mt.c, * config/tc-mt.h, * config/tc-nds32.c, * config/tc-nds32.h, * config/tc-nios2.c, * config/tc-ns32k.c, * config/tc-or1k.c, * config/tc-or1k.h, * config/tc-pdp11.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-pru.h, * config/tc-riscv.c, * config/tc-riscv.h, * config/tc-rx.c, * config/tc-rx.h, * config/tc-s12z.c, * config/tc-s12z.h, * config/tc-s390.c, * config/tc-score.c, * config/tc-score.h, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sh.h, * config/tc-spu.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tic6x.h, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-v850.h, * config/tc-visium.c, * config/tc-visium.h, * config/tc-wasm32.c, * config/tc-wasm32.h, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xstormy16.h, * config/tc-xtensa.c, * config/tc-xtensa.h, * config/tc-z80.c, * config/tc-z8k.c, * config/xtensa-istack.h, * config/xtensa-relax.c, * config/xtensa-relax.h, * dw2gencfi.c, * dwarf2dbg.c, * dwarf2dbg.h, * expr.c, * expr.h, * frags.c, * frags.h, * listing.c, * macro.c, * output-file.c, * read.c, * read.h, * stabs.c, * symbols.c, * write.c: Replace bfd_boolean with bool, FALSE with false, and TRUE with true.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-05-21GAS: Replace macro LITERAL_PREFIXDOLLAR_HEX with a runtime value.John Darrington1-0/+2
In an upcoming commit, I need to be able to set the prefix used to introduce hexadecimal literal constants using a command line flag. This is not currently possible, because the switch which determines this (LITERAL_PREFIXDOLLAR_HEX) is a macro set at build time. This change substitutes it for a variable to be set at start up. gas/ChangeLog: * expr.c (literal_prefix_dollar_hex): New variable. (operand)[case '$']: Use the new variable instead of the old macro. Also, move this instance of "case '$'" next to the other one, and enable it only in the complementary proprocessor case. * expr.h (literal_prefix_dollar_hex): Declare it. * config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex. * config/tc-ip2k.c: ditto * config/tc-mt.c: ditto * config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition. * config/tc-ip2k.h: ditto * config/tc-mt.h: ditto
2019-05-21Revert "GAS: Replace macro LITERAL_PREFIXDOLLAR_HEX with a runtime value."John Darrington1-2/+0
This reverts commit cffc205c9eaacfa312323807cd60b9d3d1c26894.
2019-05-20GAS: Replace macro LITERAL_PREFIXDOLLAR_HEX with a runtime value.John Darrington1-0/+2
In an upcoming commit, I need to be able to set the prefix used to introduce hexadecimal literal constants using a command line flag. This is not currently possible, because the switch which determines this (LITERAL_PREFIXDOLLAR_HEX) is a macro set at build time. This change substitutes it for a variable to be set at start up. gas/ChangeLog: * expr.c (literal_prefix_dollar_hex): New variable. (operand)[case '$']: Use the new variable instead of the old macro. * expr.h (literal_prefix_dollar_hex): Declare it. * config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex. * config/tc-ip2k.c: ditto * config/tc-mt.c: ditto * config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition. * config/tc-ip2k.h: ditto * config/tc-mt.h: ditto
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-02-22Add more const type qualifiers to GAS sources.Trevor Saunders1-1/+1
* output-file.c (output_file_create): Make file name argument const. (output_file_close): Likewise. * output-file.h (output_file_create): Adjust. (output_file_close): Likewise. * depend.c (quote_string_for_make): Make src argument const char *. (register_dependency): Likewise. (wrap_output): Likewise. * as.h (register_dependency): Adjust. * config/tc-xtensa.c (finish_vinsn): Remove unnecessary calls to as_where (); * symbols.c (S_SET_EXTERNAL): Likewise. * input-scrub.c (as_where): Return the file name. * as.h (as_where): Adjust prototype. * app.c (do_scrub_chars): Adjust. * cond.c (s_elseif): Likewise. (s_else): Likewise. (initialize_cframe): Likewise. * config/obj-coff.c (obj_coff_init_stab_section): Likewise. * config/obj-elf.c (obj_elf_init_stab_section): Likewise. * config/obj-som.c (obj_som_init_stab_section): Likewise. * config/tc-aarch64.c (output_info): Likewise. * config/tc-ia64.c (md_assemble): Likewise. (dot_alias): Likewise. * config/tc-m68k.c (m68k_frob_label): Likewise. * config/tc-mmix.c (s_bspec): Likewise. (mmix_handle_mmixal): Likewise. * config/tc-rx.c (rx_include): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. (tic54x_adjust_symtab): Likewise. * config/tc-xtensa.c (directive_push): Likewise. (xtensa_sanity_check): Likewise. (xtensa_relax_frag): Likewise. (md_convert_frag): Likewise. (tinsn_to_slotbuf): Likewise. * dwarf2dbg.c (dwarf2_where): Likewise. * ecoff.c (add_file): Likewise. (ecoff_generate_asm_lineno): Likewise. * expr.c (make_expr_symbol): Likewise. * frags.c (frag_new): Likewise. (frag_var_init): Likewise. * listing.c (listing_newline): Likewise. * messages.c (identify): Likewise. (as_show_where): Likewise. (as_warn_internal): Likewise. (as_bad_internal): Likewise. * read.c (s_irp): Likewise. (s_macro): Likewise. (s_reloc): Likewise. * stabs.c (stabs_generate_asm_file): Likewise. (stabs_generate_asm_lineno): Likewise. (stabs_generate_asm_func): Likewise. * write.c (fix_new_internal): Likewise. * as.h (PRINTF_WHERE_LIKE): Make file name argument const. (as_warn_value_out_of_range): Adjust prototype. (as_bad_value_out_of_range): Adjust prototype. * messages.c (identify): Make file name argument const char *. (as_warn_internal): Likewise. (as_warn_where): Likewise. (as_bad_internal): Likewise. (as_bad_where): Likewise. (as_internal_value_out_of_range): Likewise. (as_warn_value_out_of_range): Likewise. (as_bad_value_out_of_range): Likewise. * as.h (found_comment_file): Change type to const char *. * cond.c (file_line::file): Likewise. * config/obj-coff.c (obj_coff_init_stab_section): Make variable const. * config/obj-elf.c (obj_elf_init_stab_section): Likewise. * config/obj-som.c (obj_som_init_stab_section): Likewise. * config/tc-aarch64.c (output_info): Likewise. * config/tc-alpha.c (insert_operand): Likewise. * config/tc-arc.c (insert_operand): Likewise. * config/tc-d30v.c (check_size): Likewise. * config/tc-ia64.c (struct alias): Likewise. * config/tc-m68k.c (struct label_line): Likewise. * config/tc-mcore.c (md_apply_fix): Likewise. * config/tc-microblaze.c (md_estimate_size_before_relax): Likewise. * config/tc-mips.c (mips16_immed): Likewise. * config/tc-mmix.c (mmix_handle_mmixal): Likewise. * config/tc-ppc.c (ppc_insert_operand): Likewise. * config/tc-rx.c (rx_include): Likewise. * config/tc-s390.c (s390_insert_operand): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. (tic54x_adjust_symtab): Likewise. * config/tc-tilegx.c (insert_operand): Likewise. (apply_special_operator): Likewise. * config/tc-tilepro.c (insert_operand): Likewise. * config/tc-xtensa.c (directive_push): Likewise. * ecoff.c (add_file): Likewise. (ecoff_generate_asm_lineno): Likewise. * listing.c (listing_newline): Likewise. * read.c (s_irp): Likewise. * write.c (install_reloc): Likewise. * write.h (struct fix): Likewise. * input-file.c (file_name): Change type to const char *. (saved_file::file_name): Likewise. (input_file_open): Change type of argument to const char *. * input-file.h (input_file_open): Adjust. * input-scrub.c (logical_input_file): change type to const char *. (physical_input_file): Likewise. (struct input_save): Adjust. (input_scrub_push): Adjust. (input_scrub_begin): Adjust. (as_where): Adjust. * input-scrub.c (input_scrub_new_file): Make file name argument const. (input_scrub_include_file): Likewise. (new_logical_line_flags): Likewise. (new_logical_line): Likewise. * as.h: Adjust. * frags.h (struct frag): Change type of fr_file to const char *. * expr.c (expr_symbol_where): Change type of file argument to const char **. * expr.h (expr_symbol_where): Likewise. * config/tc-i370.c (md_apply_fix): adjust. * config/tc-mmix.c (mmix_md_end): Likewise. * config/tc-ppc.c (md_apply_fix): Likewise. * config/tc-s390.c (md_apply_fix): Likewise. * symbols.c (report_op_error): Likewise. (resolve_symbol_value): Likewise. * config/tc-ia64.c (slot::src_file): Change type to const char *. (rsrc::file): Likewise. * config/tc-xtensa.c (xtensa_sanity_check): Change type of variable to const char *. (xtensa_relax_frag): Likewise. (md_convert_frag): Likewise. (tinsn_to_slotbuf): Likewise. * expr.c (expr_symbol_line): Likewise. * macro.c (define_macro): Likewise. * macro.h (macro_struct): Likewise. * messages.c (as_show_where): Likewise. * read.c (s_macro): Likewise. * stabs.c (stabs_generate_asm_file): Likewise. (generate_asm_file): Likewise. (stabs_generate_asm_lineno): Likewise. * write.h (struct reloc_list): Likewise. * input-scrub.c (as_where): Change return type to const char *. * as.h (as_wheree): Adjust.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-08-21Allow symbol and label names to be enclosed in double quotes.Nick Clifton1-1/+2
gas PR gas/18581 * expr.c (get_symbol_end): Rename to get_symbol_name. Add a return parameter pointing to the start of the symbol. Allow symbol names enclosed in double quotes. (restore_line_pointer): New function. Replace the NUL character inserted into the input stream with the given character. If the character was a double quote, advance the input pointer. * expr.h (get_symbol_end): Delete. (get_symbol_name): Add prototype. (restore_line_pointer): Prototype. * read.h (SKIP_WHITESPACE_AFTER_NAME): New macro. * doc/as.texinfo (Symbol Intro): Document that symbol names can now be enclosed in double quotes. * cond.c (s_ifdef): Replace get_symbol_end with get_symbol_name. Use restore_line_pointer to replace the NUL in the input stream. Use SKIP_WHITESPACE_AFTER_NAME to skip past the end of a symbol. Check for the use of double quoted symbol names. * expr.c: Likewise. * config/obj-aout.c: Likewise. * config/obj-coff-seh.c: Likewise. * config/obj-coff.c: Likewise. * config/obj-elf.c: Likewise. * config/obj-evax.c: Likewise. * config/obj-macho.c: Likewise. * config/obj-som.c: Likewise. * config/tc-alpha.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-dlx.c: Likewise. * config/tc-h8300.c: Likewise. * config/tc-hppa.c: Likewise. * config/tc-i370.c: Likewise. * config/tc-i386-intel.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-iq2000.c: Likewise. * config/tc-m32r.c: Likewise. * config/tc-m68hc11.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-nios2.c: Likewise. * config/tc-ppc.c: Likewise. * config/tc-s390.c: Likewise. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-tic6x.c: Likewise. * config/tc-tilegx.c: Likewise. * config/tc-tilepro.c: Likewise. * config/tc-v850.c: Likewise. * config/tc-xtensa.c: Likewise. * config/tc-z80.c: Likewise. * dw2gencfi.c: Likewise. * dwarf2dbgc.: Likewise. * ecoff.c: Likewise. * read.c: Likewise. * stabs.c: Likewise. tests PR gas/18581 * gas/all/byte.d: Disable this test. Quoted expressions are now allowed in .byte directives. * gas/all/quoted-sym-names.s: New test. * gas/all/quoted-sym-names.d: Expected output. * gas/all/gas.exp: Run the new test.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-03-05Update copyright yearsAlan Modra1-2/+1
2013-04-15 gas/Julian Brown1-0/+2
* expr.c (add_to_result, subtract_from_result): Make global. * expr.h (add_to_result, subtract_from_result): Add prototypes. * config/tc-sh.c (sh_optimize_expr): Use add_to_result, subtract_from_result to handle extra bit of precision for .sleb128 directive operands. gas/testsuite/ * gas/all/gas.exp (sleb128-7): Don't run for tic4x, tic54x. * gas/all/sleb128-2.s: Reformat, use _ at start of labels, remove cruft. * gas/all/sleb128-3.s: Likewise. * gas/all/sleb128-4.s: Likewise. * gas/all/sleb128-5.s: Likewise. * gas/all/sleb128-7.s: Likewise. * gas/all/sleb128-2.d: Handle data sections named $DATA$. * gas/all/sleb128-3.d: Likewise. * gas/all/sleb128-4.d: Likewise. * gas/all/sleb128-5.d: Likewise. * gas/all/sleb128-7.d: Likewise.
2013-04-11 gas/Julian Brown1-0/+5
* read.c (convert_to_bignum): Add sign parameter. Use it instead of X_unsigned to determine sign of resulting bignum. (emit_expr): Pass extra argument to convert_to_bignum. (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass X_extrabit to convert_to_bignum. (parse_bitfield_cons): Set X_extrabit. * expr.c (make_expr_symbol, expr_build_uconstant, operand): Initialise X_extrabit field as appropriate. (add_to_result): New. (subtract_from_result): New. (expr): Use above. * expr.h (expressionS): Add X_extrabit field. gas/testsuite/ * gas/all/sleb128-2.s: New test. * gas/all/sleb128-3.s: Likewise. * gas/all/sleb128-4.s: Likewise. * gas/all/sleb128-5.s: Likewise. * gas/all/sleb128-7.s: Likewise. * gas/all/sleb128-2.d: New. * gas/all/sleb128-3.d: New. * gas/all/sleb123-4.d: New. * gas/all/sleb123-5.d: New. * gas/all/sleb123-7.d: New. * gas/all/gas.exp (sleb128-2, sleb128-3, sleb128-4, sleb128-5) (sleb128-7): Run new tests.
2010-06-22gas/Jan Beulich1-0/+1
2010-06-22 Jan Beulich <jbeulich@novell.com> PR gas/11732 * config/tc-i386-intel.c (i386_intel_parse_name): Handle pseudo symbols named "$". (i386_intel_operand): Remove bogus handling of pseudo symbols named "$". * expr.c (current_location): Remove 'static' and local declaration. * expr.h (current_location): Declare. gas/testsuite/ 2010-06-22 Jan Beulich <jbeulich@novell.com> PR gas/11732 * gas/i386/jump.d: Adjust. * gas/i386/jump.s: Add check for branch to 2+$.
2009-09-02update copyright datesAlan Modra1-1/+1
2009-04-20gas/Jan Beulich1-0/+1
2009-04-20 Jan Beulich <jbeulich@novell.com> * expr.c (operand): Call md_need_index_operator() and md_operator() if defined. Add unary label. (operator): Call md_operator() if defined. (expr): Adjust assertions on range and rank of op_left and op_right. Don't abort on unhandled operators when reducing expressions with both operands being constant. (expr_set_rank): New. * expr.h (expr_set_rank): Declare.
2007-07-03Switch to GPLv3Nick Clifton1-2/+2
2005-10-11This adjusts equate handling byNick Clifton1-2/+13
- allowing true forward references (which will always assume the referenced symbols have at the point of use) through the new .eqv pseudo-op and the new == operator - disallowing changing .equiv-generated equates (so that the protection this provides is both forward and backward) - snapshotting equates when their value gets changed so that previous uses don't get affected by the new value. - allowing expressions in places where absolute expressions (or register names) are needed which were not completely resolvable at the point of their definition but which are fully resolvable at the point of use In addition it fixes PR/288.
2005-05-05Update the address and phone number of the FSFNick Clifton1-2/+2
2005-04-29 * Makefile.am (GAS_CFILES): Remove bignum-copy.c.Ben Elliston1-2/+0
(GENERIC_OBJS): Likewise, remove bignum-copy.o. (bignum-copy.o): Remove. * Makefile.in: Regenerate. * makefile.vms (OBJS): Remove bignum-copy.obj. * symbols.h (local_symbol_make): Remove declaration. (verify_symbol_chain_2): Likewise. * symbols.c (local_symbol_make): Make static. (max_indent_level): Likewise. (verify_symbol_chain_2): Remove. * macro.c (macro_hash): Make static. * messages.c (fprint_value): Remove. * read.h (get_absolute_expr): Remove. (emit_leb128_expr): Likewise. (do_s_func): Likewise. * read.c (do_s_func): Make static. (emit_leb128_expr): Likewise. (get_absolute_expr): Likewise. * as.h (as_howmuch): Remove declaration. (fprint_value): Likewise. * as.c (myname): Make static. * input-scrub.c (as_howmuch): Remove. (as_1_char): Likewise. * input-file.h (input_file_is_open): Remove. * input-file.c (input_file_is_open): Likewise. * expr.h (expr_build_unary): Remove declaration. (expr_build_binary): Likewise. * expr.c (expr_build_unary): Remove. (expr_build_binary): Likewise. * hash.h (hash_replace): Remove declaration. (hash_delete): Likewise. * hash.c (hash_replace): Remove. (hash_delete): Likewise. * bignum-copy.c (bignum_copy): Move from here .. * config/tc-vax.c (bignum_copy): .. to here. * bignum.h (LOG_TO_BASE_2_OF_10): Remove. (bignum_copy): Remove extern declaration. * sb.h (string_count): Remove extern declaration. (sb_build, sb_add_buffer, sb_print, sb_print_at): Likewise. (sb_name): Likewise. * sb.c (dsize): Replace preprocessor macro with static int. (string_count): Make static. (sb_build, sb_add_buffer, sb_print, sb_print_at): Likewise. (sb_name): Likewise. * config/obj-coff.c (dim_index): Make static. * config/tc-i386.c (GOT_symbol): Likewise. (output_invalid_buf): Likewise. * doc/internals.texi (Warning and error messages): Remove the prototype for fprint_value.
2005-03-03update copyright datesAlan Modra1-2/+2
2003-11-22 * ehopt.c: Convert to ISO-C.Kazu Hirata1-13/+12
* emul.h: Likewise. * expr.c: Likewise. * expr.h: Likewise. * flonum-copy.c: Likewise. * flonum-mult.c: Likewise. * flonum.h: Likewise. * frags.c: Likewise. * frags.h: Likewise.
2003-05-01 * expr.h: Fix comments in operatorT typedef.Christian Groessler1-9/+9
* config/tc-z8k.c: Add 2003 to copyright message. Fold s_segm() and s_unseg() into one function s_segm(parm) which decides by the parameter. (md_begin): Don't set linkrelax. Only set Z8002 default if no command line argument was given to select the intended architecure. (get_interrupt_operand): Warn if NOP type code is emitted. (newfix): New parameter 'size', forward it to 'fix_new_exp'. (apply_fix): Call newfix with additional 'size' parameter. (build_bytes): Remove unused variable 'nib'. Detect overflow in 4 bit immediate arguments. (md_longopts): Add 'linkrelax' option. (md_parse_option): Adapt to new s_segm function. Set 'linkrelax' variable when 'linkrelax' command line option is specified. (md_show_usage): Display 'linkrelax' option. (md_apply_fix3): Fix cases R_IMM4L, R_JR, and R_IMM8. Add cases R_CALLR and R_REL16. * config/tc-z8k.h: Undef WARN_SIGNED_OVERFLOW_WORD.
2002-05-30include/elf/Richard Henderson1-0/+2
* alpha.h (R_ALPHA_TLSGD, R_ALPHA_TLSLDM, R_ALPHA_DTPMOD64, R_ALPHA_GOTDTPREL, R_ALPHA_DTPREL64, R_ALPHA_DTPRELHI, R_ALPHA_DTPRELLO, R_ALPHA_DTPREL16, R_ALPHA_GOTTPREL, R_ALPHA_TPREL64, R_ALPHA_TPRELHI, R_ALPHA_TPRELLO, R_ALPHA_TPREL16): New. bfd/ * elf64-alpha.c (ALPHA_ELF_LINK_HASH_LU_TLSGD, ALPHA_ELF_LINK_HASH_LU_TLSLDM, ALPHA_ELF_LINK_HASH_LU_FUNC): New. (ALPHA_ELF_GOT_ENTRY_RELOCS_DONE): Remove. (ALPHA_ELF_GOT_ENTRY_RELOCS_XLATED): Remove. (struct alpha_elf_got_entry): Add reloc_type, reloc_done, reloc_xlated. (struct alpha_elf_obj_tdata): Rename total_got_entries and n_local_got_entries to total_got_size and local_got_size. (elf64_alpha_howto, elf64_alpha_reloc_map): Update for TLS relocs. (alpha_got_entry_size): New. (elf64_alpha_relax_with_lituse): Use it. (elf64_alpha_relax_without_lituse): Likewise. (MAX_GOT_SIZE): Rename from MAX_GOT_ENTRIES. (get_got_entry): New. (elf64_alpha_check_relocs): Handle TLS relocs. Reorganize. (elf64_alpha_adjust_dynamic_symbol): Test LU_FUNC as a mask. (elf64_alpha_merge_ind_symbols): Check gotent->reloc_type. (elf64_alpha_can_merge_gots, elf64_alpha_merge_gots): Likewise. (elf64_alpha_calc_got_offsets_for_symbol): Use alpha_got_entry_size. (elf64_alpha_calc_got_offsets): Likewise. (alpha_dynamic_entries_for_reloc): New. (elf64_alpha_calc_dynrel_sizes): Use it. (elf64_alpha_size_dynamic_sections): Likewise. (elf64_alpha_relocate_section): Handle TLS relocations. * reloc.c: Add Alpha TLS relocations. * bfd-in2.h, libbfd.h: Rebuild. gas/ * expr.h (operatorT): Add O_md17..O_md32. * config/tc-alpha.c (O_lituse_tlsgd, O_lituse_tlsldm, O_tlsgd, O_tlsldm, O_gotdtprel, O_dtprelhi, O_dtprello, O_dtprel, O_gottprel, O_tprelhi, O_tprello, O_tprel): New. (USER_RELOC_P, alpha_reloc_op_tag, debug_exp): Include them. (DUMMY_RELOC_LITUSE_TLSGD, DUMMY_RELOC_LITUSE_TLSLDM): New. (LITUSE_TLSGD, LITUSE_TLSLDM): New. (struct alpha_reloc_tag): Add master, saw_tlsgd, saw_tlsld, saw_lu_tlsgd, saw_lu_tlsldm. Make multi_section_p a bit field. (md_apply_fix3): Handle TLS relocations. (alpha_force_relocation, alpha_fix_adjustable): Likewise. (alpha_adjust_symtab_relocs): Sort LITERAL relocs after the associated TLS reloc. Check lituse_tls relocs match up. (emit_insn): Handle TLS relocations. (ldX_op): Remove. gas/testsuite/ * gas/alpha/elf-tls-1.s, gas/alpha/elf-tls-1.d: New. * gas/alpha/elf-tls-2.s, gas/alpha/elf-tls-1.l: New. * gas/alpha/elf-tls-3.s, gas/alpha/elf-tls-1.l: New. * gas/alpha/alpha.exp: Run them.
2001-03-08Fix copyright noticesNick Clifton1-1/+2
2000-10-172000-10-17 Kazu Hirata <kazu@hxi.com>Kazu Hirata1-4/+2
* debug.c: Fix formatting. * depend.c: Likewise. * dwarf2dbg.c: Likewise. * dwarf2dbg.h: Likewise. * ecoff.c: Likewise. * expr.c: Likewise. * expr.h: Likewise. * flonum-konst.c: Likewise. * frags.h: Likewise.
2000-09-122000-09-12 Kazu Hirata <kazu@hxi.com>Kazu Hirata1-8/+6
* as.h: Fix formatting. * asintl.h: Likewise. * bit_fix.h: Likewise. * dwarf2dbg.h: Likewise. * expr.h: Likewise. * flonum.h: Likewise. * frags.h: Likewise. * itbl-ops.h: Likewise. * macro.h: Likewise. * read.h: Likewise. * sb.h: Likewise. * struc-symbol.h: Likewise. * subsegs.h: Likewise. * symbols.h: Likewise. * tc.h: Likewise. * write.h: Likewise.
1999-11-05Add more md operatorsMichael Meissner1-16/+3
1999-10-18Add md expression support; Cleanup alpha warningsMichael Meissner1-2/+25
1999-06-07 * expr.h (struct expressionS): Revert last change; widen X_op.Richard Henderson1-2/+8
* config/tc-alpha.c (md_begin): Check the field is wide enough.
1999-06-05 * dwarf2dbg.c (dwarf2_gen_line_info): Mirror the section symbolRichard Henderson1-8/+2
creation logic from obj_elf_create_section. * config/obj-elf.c (elf_pseudo_tab): Add pushsection/popsection. (section_stack): New. (special_sections): Make const. (obj_elf_section): Gut and rewrite parsing. (obj_elf_change_section): New function broken out of obj_elf_section. (obj_elf_parse_section_letters): Likewise. (obj_elf_section_word): Likewise. (obj_elf_section_type): Likewise. (obj_elf_previous): Treat as a toggle. (obj_elf_popsection): New. * config/tc-ppc.c (ppc_section_word): Take str+len not ptr_str. (ppc_section_type): Likewise. * config/tc-ppc.h: Likewise. * expr.h (struct expressionS): Don't make X_op a bitfield. * config/tc-alpha.c: Update for symbol handling changes. (md_apply_fix) [case GPREL]: Use now_seg instead of absolute_section. (load_expression, emit_ir_load, emit_loadstore, emit_jsrjmp): Likewise.
1999-06-03 * expr.c (operand): Don't use [ for parens if we want an index op.Richard Henderson1-0/+2
(op_encoding): Switch [ into O_index, if desired. (op_rank): Renumber with O_index on bottom. (expr): If O_index, match closing bracket. * expr.h (O_index): New.
1999-06-03 Add support for storing local symbols in a small structure to saveIan Lance Taylor1-10/+9
memory when assembling large files. * as.h: Don't include struc-symbol.h. (symbolS): Add typedef. * symbols.c: Include struc-symbol.h. (local_hash): New static variable. (save_symbol_name): New static function, from symbol_create. (symbol_create): Call save_symbol_name. (local_symbol_count): New static variable. (local_symbol_conversion_count): Likewise. (LOCAL_SYMBOL_CHECK): Define. (local_symbol_make): New static function. (local_symbol_convert): New static function. (colon): Handle local symbols. Create local symbol for local label name. (symbol_table_insert): Handle local symbols. (symbol_find_or_make): Create local symbol for local label name. (symbol_find_base): Check for local symbol. (symbol_append, symbol_insert): Check for local symbols. (symbol_clear_list_pointers, symbol_remove): Likewise. (verify_symbol_chain): Likewise. (copy_symbol_attributes): Likewise. (resolve_symbol_value): Handle local symbols. (resolve_local_symbol): New static function. (resolve_local_symbol_values): New function. (S_GET_VALUE, S_SET_VALUE): Handle local symbols. (S_IS_FUNCTION, S_IS_EXTERNAL, S_IS_WEAK, S_IS_COMMON): Likewise. (S_IS_DEFINED, S_IS_DEBUG, S_IS_LOCAL, S_GET_NAME): Likewise. (S_GET_SEGMENT, S_SET_SEGMENT, S_SET_EXTERNAL): Likewise. (S_CLEAR_EXTERNAL, S_SET_WEAK, S_SET_NAME): Likewise. (symbol_previous, symbol_next): New functions. (symbol_get_value_expression): Likewise. (symbol_set_value_expression): Likewise. (symbol_set_frag, symbol_get_frag): Likewise. (symbol_mark_used, symbol_clear_used, symbol_used_p): Likewise. (symbol_mark_used_in_reloc): Likewise. (symbol_clear_used_in_reloc, symbol_used_in_reloc_p): Likewise. (symbol_mark_mri_common, symbol_clear_mri_common): Likewise. (symbol_mri_common_p): Likewise. (symbol_mark_written, symbol_clear_written): Likewise. (symbol_written_p): Likewise. (symbol_mark_resolved, symbol_resolved_p): Likewise. (symbol_section_p, symbol_equated_p): Likewise. (symbol_constant_p): Likewise. (symbol_get_bfdsym, symbol_set_bfdsym): Likewise. (symbol_get_obj, symbol_set_obj): Likewise. (symbol_get_tc, symbol_set_tc): Likewise. (symbol_begin): Initialize local_hash. (print_symbol_value_1): Handle local symbols. (symbol_print_statistics): Print local symbol statistics. * symbols.h: Include "struc-symbol.h" if not BFD_ASSEMBLER. Declare new symbols.c functions. Move many declarations here from struc-symbol.h. (SYMBOLS_NEED_BACKPOINTERS): Define if needed. * struc-symbol.h (SYMBOLS_NEED_BACKPOINTERS): Don't set. (struct symbol): Move bsym to make it clearly the first field. Remove TARGET_SYMBOL_FIELDS. (symbolS): Don't typedef. (struct broken_word): Remove. (N_TYPE_seg, seg_N_TYPE): Move to symbol.h. (SEGMENT_TO_SYMBOL_TYPE, N_REGISTER): Likewise. (symbol_clear_list_pointers): Likewise. (symbol_insert, symbol_remove): Likewise. (symbol_previous, symbol_append): Likewise. (verify_symbol_chain, verify_symbol_chain_2): Likewise. (struct local_symbol): Define. (local_symbol_converted_p, local_symbol_mark_converted): Define. (local_symbol_resolved_p, local_symbol_mark_resolved): Define. (local_symbol_get_frag, local_symbol_set_frag): Define. (local_symbol_get_real_symbol): Define. (local_symbol_set_real_symbol): Define. Define. * write.c (write_object_file): Call resolve_local_symbol_values. * config/obj-ecoff.h (OBJ_SYMFIELD_TYPE): Define. (TARGET_SYMBOL_FIELDS): Don't define. * config/obj-elf.h (OBJ_SYMFIELD_TYPE): Add local field. If ECOFF_DEBUGGING, add ECOFF fields. (ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define. * config/obj-multi.h (struct elf_obj_sy): Add local field. If ECOFF_DEBUGGING, add ECOFF fields. (ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define. (ECOFF_DEBUG_TARGET_SYMBOL_FIELDS): Don't define. * config/tc-mcore.h: Don't include struc-symbol.h. (TARGET_SYMBOL_FIELDS): Don't define. (struct mcore_tc_sy): Define. (TC_SYMFIELD_TYPE): Define. * Many files: Use symbolS instead of struct symbol. Use new accessor functions rather than referring to symbolS fields directly. * read.c (s_mri_common): Don't add in value of line_label. * config/tc-mips.c (md_apply_fix): Correct parenthesization when checking for SEC_LINK_ONCE. * config/tc-sh.h (sh_fix_adjustable): Declare.
1999-05-0319990502 sourceware importbinu_ss_19990502Richard Henderson1-0/+162